What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 3 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 3 of 53

5340-27-019-2035
Mounting Bracket

270192035
11001MP0119: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-055-4302
Mounting Bracket

270554302
84219070: RNCC: 2 | RNVC: 2

5 Dec 2011

5340-27-020-6306
Mounting Bracket

270206306
1009.1KI.0220-11*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-6590
Catch Strike

270226590
8725 07: RNCC: 2 | RNVC: 1

6 Apr 2004

5340-27-016-5317
Angle Bracket

270165317
98011267: RNCC: 2 | RNVC: 1

4 Feb 2003

5340-27-053-3627
Utility Access Door

270533627
H341148004: RNCC: 2 | RNVC: 1

22 Apr 2011

5340-27-054-6863
Mounting Bracket

270546863
98016689: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-015-0357
Loop Clamp

270150357
7057340: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-050-2430
Bow Handle

270502430
KOL,50.LIK: RNCC: 2 | RNVC: 1

12 Jul 2010

5340-27-008-8798
Rod End Clevis

270088798
8761: RNCC: 2 | RNVC: 1

7 Feb 2001

5340-27-021-3098
Mending Plate

270213098
1012.1HSCA.02-01: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-2960
Mounting Bracket

270562960
MM-7560-0350: RNCC: 3 | RNVC: 2

12 Mar 2012

5340-27-051-4692
Angle Bracket

270514692
Y532-66102-201: RNCC: 2 | RNVC: 1

1 Nov 2010

5340-27-058-2734
Mending Plate

270582734
MM-7490-0081: RNCC: 2 | RNVC: 1

2 Jan 2013

5340-27-049-4830
Rim Latch

270494830
MCT1221313-001: RNCC: 2 | RNVC: 1

4 May 2010

5340-27-024-4305
Mounting Bracket

270244305
1010FK-2710751: RNCC: 2 | RNVC: 1

26 Oct 2004

5340-27-022-6278
Mounting Bracket

270226278
23180T: RNCC: 2 | RNVC: 1

31 Mar 2004

5340-27-006-9390
Mounting Bracket

270069390
91AG A04504 AC: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-015-0400
Loop Clamp

270150400
7520874: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-057-9880
Mounting Bracket

270579880
40158-ZY3-000: RNCC: 2 | RNVC: 1

27 Nov 2012

5340-27-050-8896
Mounting Bracket

270508896
63D-42121-00-4D: RNCC: 2 | RNVC: 2

7 Sep 2010

5340-27-056-2950
Mounting Bracket

270562950
MM-7560-0339: RNCC: 3 | RNVC: 2

9 Mar 2012

5340-27-059-3043
Access Cover

270593043
98019105-19: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-058-0543
Mending Plate

270580543
87701-ZZ5-780: RNCC: 2 | RNVC: 1

5 Dec 2012

5340-27-053-4743
Mounting Bracket

270534743
H233110600: RNCC: 2 | RNVC: 1

10 May 2011

5340-27-051-2184
Bridge Clamp

270512184
107816: RNCC: 3 | RNVC: 2

11 Oct 2010

5340-27-048-9618
Mending Plate

270489618
103643: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-040-6550
Mounting Bracket

270406550
40-770-0204: RNCC: 2 | RNVC: 1

19 Feb 2008

5340-27-058-3983
Expansion Plug

270583983
9V663-8T-8737: RNCC: 2 | RNVC: 1

22 Jan 2013

5340-27-001-7516
Retaining Strap

270017516
TM55-1520-210-3205-031-481-019: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-005-5918
Control Rod

270055918
92VB-2841-BB: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-036-7942
Butt Hinge

270367942
5.LIK YAPRAK: RNCC: 2 | RNVC: 1
YAPRAK MENTESE, 5CM: RNCC: 2 | RNVC: 1

28 Jun 2007

5340-27-029-9157
Loop Clamp

270299157
5PS-14725-00-00: RNCC: 2 | RNVC: 1

6 Jun 2006

5340-27-032-6383
Utility Access Door

270326383
FT-001-0102: RNCC: 2 | RNVC: 1

28 Aug 2006

5340-27-013-4791
Mending Plate

270134791
8B71689: RNCC: 2 | RNVC: 1

24 Jun 2002

5340-27-051-4085
Mending Plate

270514085
102068: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-016-7583
Catch Strike

270167583
8B82385: RNCC: 2 | RNVC: 1

12 Mar 2003

5340-27-033-6372
Angle Bracket

270336372
901-AS-353: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-017-7263
Access Cover

270177263
MKE 401 169: RNCC: 2 | RNVC: 1

22 Aug 2003

5340-27-040-2848
Angle Bracket

270402848
Y535-75002-216: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-054-5535
Mounting Bracket

270545535
98022339: RNCC: 3 | RNVC: 2

23 Sep 2011

5340-27-017-0544
Mounting Bracket

270170544
2901454: RNCC: 2 | RNVC: 1

12 May 2003

5340-27-040-2787
Handle Grip

270402787
Y531-61011-208: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-014-3916
Catch Strike

270143916
YC15 V441A07 AF: RNCC: 2 | RNVC: 1

10 Oct 2002

5340-27-008-3165
Rod Retainer Clip

270083165
14199683: RNCC: 2 | RNVC: 1

14 Sep 2000

5340-27-054-6597
Mending Plate

270546597
98021358: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-27-048-9458
Flush Catch

270489458
191200015: RNCC: 3 | RNVC: 2

19 Mar 2010

5340-27-052-8026
Mending Plate

270528026
63 14 199 27R: RNCC: 2 | RNVC: 2

25 Feb 2011

5340-27-058-9660
Access Cover

270589660
VOE12746022: RNCC: 3 | RNVC: 2

9 May 2013

5340-27-027-4785
Lever Bracket

270274785
6337720-B: RNCC: 2 | RNVC: 1

5 Oct 2005

5340-27-054-7445
Mending Plate

270547445
EST500: RNCC: 2 | RNVC: 2

12 Oct 2011

5340-27-028-7742
Mounting Bracket

270287742
884-5800-974: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-059-2739
Mounting Bracket

270592739
55RS860501: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-052-6089
Mending Plate

270526089
103855: RNCC: 2 | RNVC: 2

9 Feb 2011

5340-27-039-7877
Mounting Bracket

270397877
1.HIBM-1I-2690: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-021-0363
Mounting Bracket

270210363
1009.1KI.0236-5*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-1562
Retaining Clip

270051562
1010001564: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-043-4837
Mounting Bracket

270434837
901-US-3: RNCC: 2 | RNVC: 1

14 Nov 2008

5340-27-017-1501
Angle Bracket

270171501
ASM1-14/K1: RNCC: 2 | RNVC: 1

21 May 2003

5340-27-028-7613
Mounting Bracket

270287613
884-5810-969: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-019-6300
Loop Clamp

270196300
90464-14001-00: RNCC: 2 | RNVC: 1
05001HK0335: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-2031
Angle Bracket

270212031
1010FG-0000417: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-008-7040
Control Rod

270087040
T720-G6100-200: RNCC: 2 | RNVC: 1
DR-00092-0201: RNCC: 2 | RNVC: 1

19 Dec 2000

5340-27-040-5165
Mounting Bracket

270405165
10873487: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-054-1747
Mending Plate

270541747
98022461: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-039-3856
Flush Catch

270393856
KILIT ROMORK: RNCC: 2 | RNVC: 1

29 Nov 2007

5340-27-056-9818
Sliding Door Track

270569818
7T16V250A13CA: RNCC: 2 | RNVC: 1

6 Jun 2012

5340-27-052-2003
Bridge Clamp

270522003
8.216.000.375.0: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-27-059-2663
Access Cover

270592663
2.04.01.00.016: RNCC: 5 | RNVC: 9

2 Jul 2013

5340-27-028-6530
Mounting Bracket

270286530
10003939: RNCC: 2 | RNVC: 1

26 Jan 2006

5340-27-036-2749
Mounting Bracket

270362749
1B15003: RNCC: 2 | RNVC: 1

21 May 2007

5340-27-007-1744
Retaining Clip

270071744
91CT296BA: RNCC: 2 | RNVC: 1
E 865824 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-007-1711
Elastic Strap

270071711
E 863103 S: RNCC: 2 | RNVC: 1
16MM2: RNCC: 3 | RNVC: 2

14 Sep 1999

5340-27-054-7849
Mending Plate

270547849
202292: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-059-6728
Loop Clamp

270596728
901-KL-322: RNCC: 2 | RNVC: 1

25 Sep 2013

5340-27-022-4653
Mounting Bracket

270224653
1010FK-0000348: RNCC: 2 | RNVC: 1

12 Mar 2004

5340-27-033-6299
Mounting Bracket

270336299
40-205-3045: RNCC: 2 | RNVC: 1
40-205-3045: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-048-7968
Angle Bracket

270487968
9035-76: RNCC: 2 | RNVC: 1
9035-76: RNCC: 5 | RNVC: 9

2 Mar 2010

5340-27-020-7537
Mounting Bracket

270207537
1009.1KI.0339-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-7563
Mounting Bracket

270287563
884-5810-942: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-053-1814
Mending Plate

270531814
6040-4037-5015: RNCC: 2 | RNVC: 2

6 Apr 2011

5340-27-049-1330
Mounting Bracket

270491330
901-GA-39: RNCC: 2 | RNVC: 1

6 Apr 2010

5340-27-056-7064
Mounting Bracket

270567064
ADOP-SHELTER-180-KK: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-050-8495
Access Cover

270508495
62X-42610-10-4D: RNCC: 3 | RNVC: 2
62X-42610-10-4D: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-052-7718
Crank Handle

270527718
HM-7M-21: RNCC: 2 | RNVC: 1

22 Feb 2011

5340-27-019-9933
Strap Fastener Loop

270199933
8335KKT000326: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-053-4307
Strap Fastener Loop

270534307
44BMK0124: RNCC: 2 | RNVC: 1

4 May 2011

5340-27-020-3345
Strap Fastener Loop

270203345
1010007430: RNCC: 2 | RNVC: 1

2 Dec 2003

5340-27-042-7127
Strap Fastener Loop

270427127
8335TOKA9880015: RNCC: 2 | RNVC: 1

8 Sep 2008

5340-27-023-1583
Strap Fastener Loop

270231583
KMS 0052: RNCC: 2 | RNVC: 1

2 Jun 2004

5340-27-013-3747
Sliding Door Track

270133747
YC15 V25004 CE: RNCC: 2 | RNVC: 1

10 Jun 2002

5340-27-008-1812
Retaining Strap

270081812
H25S2-40442: RNCC: 2 | RNVC: 1
251330000: RNCC: 2 | RNVC: 1

3 Aug 2000

5340-27-005-6162
Catch Strike

270056162
92VB-V16K689-CA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-023-0802
Mounting Bracket

270230802
9BM 5340-00084: RNCC: 2 | RNVC: 1

27 May 2004

5340-27-023-1900
Arched Cushion

270231900
22449: RNCC: 2 | RNVC: 1

4 Jun 2004

5340-27-051-3198
Strap Fastener Loop

270513198
KK0140324: RNCC: 2 | RNVC: 1

15 Oct 2010

5340-27-032-8650
Strap Fastener Loop

270328650
10111YT1551: RNCC: 2 | RNVC: 1

25 Sep 2006

5340-27-005-1719
Access Cover

270051719
1010002092: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-055-4892
Mounting Bracket

270554892
5441461-A: RNCC: 2 | RNVC: 1

8 Dec 2011

5340-27-021-4110
Mounting Bracket

270214110
1009.1KI.0308-6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-004-5516
Retaining Strap

270045516
10091YB5006: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-040-4519
Mounting Bracket

270404519
1159079-3: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-056-4422
Mending Plate

270564422
98000557-7: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-024-1980
Mounting Bracket

270241980
1010FG-1831165-1: RNCC: 2 | RNVC: 1

29 Sep 2004

5340-27-058-1346
Mending Plate

270581346
03E-93793-0: RNCC: 2 | RNVC: 1

13 Dec 2012

5340-27-014-9268
Caster Wheel

270149268
2630-31968-00002: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-009-1334
Rod End Clevis

270091334
BG-01-04-016: RNCC: 2 | RNVC: 1

8 May 2001

5340-27-022-1010
Mounting Bracket

270221010
1009 1YR 1158-6: RNCC: 2 | RNVC: 1

10 Feb 2004

5340-27-023-8760
Ball Socket Seat

270238760
6.07.07.24: RNCC: 2 | RNVC: 1

13 Aug 2004

5340-27-046-6621
Mounting Bracket

270466621
2ABEP01134: RNCC: 2 | RNVC: 1

24 Sep 2009

5340-27-040-4147
Mounting Bracket

270404147
34R2776-1: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-035-1807
Bow Handle

270351807
85005436: RNCC: 2 | RNVC: 1

1 Mar 2007

5340-27-052-2010
Mending Plate

270522010
8.216.000.362.0: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-27-040-5747
Tee Hinge

270405747
8200081365: RNCC: 2 | RNVC: 1

31 Jan 2008

5340-27-049-8522
Tee Hinge

270498522
107484: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-006-7480
Expansion Plug

270067480
8K12868: RNCC: 2 | RNVC: 1

22 Apr 1999

5340-27-026-3340
Expansion Shield

270263340
10131MD0222: RNCC: 2 | RNVC: 1

29 Jun 2005

5340-27-053-8278
Mending Plate

270538278
C173-410002: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-27-013-4434
Corner Brace

270134434
53RS700232: RNCC: 2 | RNVC: 1

19 Jun 2002

5340-27-013-1105
Strap Fastener Loop

270131105
B.A-C.TOKA-34X28: RNCC: 2 | RNVC: 1
831527HL0000405: RNCC: 2 | RNVC: 1

26 Apr 2002

5340-27-052-8025
Mending Plate

270528025
63 14 000 42R: RNCC: 2 | RNVC: 2

25 Feb 2011

5340-27-012-6366
Access Cover

270126366
98011051-2: RNCC: 2 | RNVC: 1

20 Feb 2002

5340-27-006-9035
Vehicular Bumper

270069035
A 435 520 01 71: RNCC: 2 | RNVC: 1

22 Jun 1999

5340-27-057-0567
Sliding Door Track

270570567
6T16V25005AC: RNCC: 2 | RNVC: 1

13 Jun 2012

5340-27-049-9655
Tee Hinge

270499655
HD250159X: RNCC: 2 | RNVC: 2
HD250159X: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-017-3750
Bow Handle

270173750
1009.1IS.0052-4: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-006-8878
Vehicular Bumper

270068878
A 436 520 71 70: RNCC: 2 | RNVC: 1
A 436 520 7170: RNCC: 5 | RNVC: 9

9 Jun 1999

5340-27-013-7001
Mortise Lock

270137001
KOD 6115: RNCC: 2 | RNVC: 1

15 Jul 2002

5340-27-025-3132
Bow Handle

270253132
07001YK0523: RNCC: 2 | RNVC: 1

23 Feb 2005

5340-27-028-7771
Mounting Bracket

270287771
884-5800-986: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-059-6517
Loop Clamp

270596517
901-KL-349: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-001-7709
Strap Hinge

270017709
CESSNA-185-PART0711037-3: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-27-049-9686
Mending Plate

270499686
HD1001B6: RNCC: 2 | RNVC: 2
HD1001B6: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-034-6288
Mounting Bracket

270346288
1C442A275AA: RNCC: 2 | RNVC: 1

30 Jan 2007

5340-27-053-7325
Bridge Clamp

270537325
901-TK-1-5: RNCC: 2 | RNVC: 1

13 Jun 2011

5340-27-018-2422
Access Cover

270182422
3.06.14.10: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-039-7741
Sliding Door Track

270397741
897315865151: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-007-1729
Retaining Clip

270071729
E 865206 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-046-4228
Mounting Bracket

270464228
72A33-36934-AA: RNCC: 2 | RNVC: 1

6 Aug 2009

5340-27-022-9659
Mounting Bracket

270229659
1010FG-0000769: RNCC: 2 | RNVC: 1

8 May 2004

5340-27-017-9421
Rod End Clevis

270179421
1009 1KI 0228/3-29: RNCC: 2 | RNVC: 1

14 Oct 2003

5340-27-014-6074
Filler Opening Cap

270146074
2901220: RNCC: 2 | RNVC: 1

13 Nov 2002

5340-27-051-4147
Mending Plate

270514147
108593: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-003-9178
Loop Clamp

270039178
07001MN0656: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-024-5649
Mortise Lock

270245649
KAPI: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-032-7540
Mounting Bracket

270327540
13D05-58311-AA: RNCC: 2 | RNVC: 1

14 Sep 2006

5340-27-033-8930
Bow Handle

270338930
12E00-57014-AB: RNCC: 2 | RNVC: 1

28 Nov 2006

5340-27-056-4157
Bumper

270564157
233517501: RNCC: 5 | RNVC: 9

27 Mar 2012

5340-27-019-9013
Antipilferage Seal

270199013
4121PM0057: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-017-3855
Mounting Bracket

270173855
10091IS0036: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-049-6655
Mounting Bracket

270496655
040000-015-0: RNCC: 2 | RNVC: 1

18 May 2010

5340-27-048-4656
Bridge Clamp

270484656
BW303205009A: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-27-021-8517
Angle Bracket

270218517
1010007567: RNCC: 2 | RNVC: 1

6 Jan 2004

5340-27-032-7767
Mounting Bracket

270327767
12E03-08841-AA: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-021-4102
Mounting Bracket

270214102
1009.1KI.0131-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-034-8003
Mounting Bracket

270348003
13239124: RNCC: 2 | RNVC: 1

9 Feb 2007

5340-27-042-9556
Hinge Torsion Bar

270429556
40.270.8214: RNCC: 2 | RNVC: 1
40.270.8214: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-038-2179
Access Cover

270382179
3583828: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-021-8148
Angle Bracket

270218148
10121YS5661: RNCC: 2 | RNVC: 1
10951251: RNCC: 2 | RNVC: 1

30 Dec 2003

5340-27-050-8426
Loop Clamp

270508426
90464-06M19: RNCC: 3 | RNVC: 2
90464-06M19: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-005-5917
Control Rod

270055917
92VB-2841-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-051-4694
Angle Bracket

270514694
Y532-68007-201: RNCC: 2 | RNVC: 1

1 Nov 2010

5340-27-059-5608
Angle Bracket

270595608
901-DS-140: RNCC: 2 | RNVC: 1

6 Sep 2013

5340-27-048-7360
Loop Clamp

270487360
7291-03: RNCC: 2 | RNVC: 1
7291-03: RNCC: 5 | RNVC: 9

24 Feb 2010

5340-27-043-1231
Angle Bracket

270431231
TMS-P304-05: RNCC: 3 | RNVC: 2

14 Oct 2008

5340-27-049-7225
Bow Handle

270497225
901-PT-82: RNCC: 2 | RNVC: 1

24 May 2010

5340-27-024-6415
Catch Strike

270246415
8M63612: RNCC: 2 | RNVC: 1

24 Nov 2004

5340-27-005-4926
Mounting Plate

270054926
G001-31: RNCC: 3 | RNVC: 2

16 Nov 1997

5340-27-033-6560
Access Cover

270336560
40-205-5050: RNCC: 2 | RNVC: 1
40-205-5050: RNCC: 2 | RNVC: 1

9 Nov 2006

5340-27-025-7838
Loop Clamp

270257838
KLPC-51: RNCC: 2 | RNVC: 1

11 Apr 2005

5340-27-025-7426
Mounting Bracket

270257426
2ABM 1IMZA 0001/04: RNCC: 2 | RNVC: 1

4 Apr 2005

5340-27-033-6735
Butt Hinge

270336735
HA21-15: RNCC: 2 | RNVC: 1

13 Nov 2006

5340-27-023-3707
Doorknob

270233707
TOKMAK: RNCC: 2 | RNVC: 1

25 Jun 2004

5340-27-058-5614
Mending Plate

270585614
98023190: RNCC: 2 | RNVC: 1

21 Feb 2013

5340-27-004-5517
Retaining Strap

270045517
10091YB5007: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-026-6522
Mounting Bracket

270266522
73-3579-2234: RNCC: 2 | RNVC: 1
7335792234: RNCC: 5 | RNVC: 9

15 Jul 2005

5340-27-058-3811
Mending Plate

270583811
CV67758/1: RNCC: 2 | RNVC: 1

18 Jan 2013

5340-27-058-1566
Mending Plate

270581566
03E-94347-0: RNCC: 2 | RNVC: 1

17 Dec 2012

5340-27-057-9818
Mounting Bracket

270579818
X-1960-A: RNCC: 2 | RNVC: 2

26 Nov 2012

5340-27-038-1046
Mounting Bracket

270381046
047-10-016: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-037-7994
Mending Plate

270377994
DA0173977: RNCC: 2 | RNVC: 1

24 Aug 2007

5340-27-056-9342
Caster Wheel

270569342
M01-01-002: RNCC: 2 | RNVC: 1

31 May 2012

5340-27-048-7361
Loop Clamp

270487361
7291-04: RNCC: 2 | RNVC: 1
7291-04: RNCC: 5 | RNVC: 9

24 Feb 2010

5340-27-010-7886
Loop Clamp

270107886
99999-NIIN-DA0029200: RNCC: 2 | RNVC: 1
4730 DA 001289: RNCC: 2 | RNVC: 1

15 Oct 2003

5340-27-001-2992
Loop Clamp

270012992
205-030-713-032: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-022-5900
Mounting Bracket

270225900
25231T: RNCC: 2 | RNVC: 1

25 Mar 2004

5340-27-054-1744
Mending Plate

270541744
98020942: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-007-3755
Retaining Clip

270073755
W 700910 S309: RNCC: 2 | RNVC: 1

27 Oct 1999

5340-27-056-3469
Mounting Bracket

270563469
3831865: RNCC: 2 | RNVC: 2

15 Mar 2012

5340-27-050-7295
Mounting Bracket

270507295
79C00-73900-AA: RNCC: 2 | RNVC: 1

23 Aug 2010

5340-27-017-4238
Angle Bracket

270174238
EIBM-AA4-900-I-13: RNCC: 2 | RNVC: 1

20 Jun 2003

5340-27-045-8401
Mounting Bracket

270458401
115.5210.052: RNCC: 3 | RNVC: 2

15 Jun 2009

5340-27-005-9918
Rod Retainer Clip

270059918
E866270S: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-27-048-9736
Mounting Bracket

270489736
1010FG-1401857: RNCC: 2 | RNVC: 1

23 Mar 2010

5340-27-026-0138
Mounting Bracket

270260138
1615910784: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-022-4555
Mounting Bracket

270224555
50718MT3000: RNCC: 2 | RNVC: 1
50718MT3000: RNCC: 5 | RNVC: 9

11 Mar 2004

5340-27-015-0413
Loop Clamp

270150413
7718643: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-018-6473
Mounting Bracket

270186473
1010FG-0612005-2: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-059-6640
Loop Clamp

270596640
901-KL-390: RNCC: 2 | RNVC: 1

25 Sep 2013

5340-27-050-3876
Mending Plate

270503876
105568: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-025-4883
Loop Clamp

270254883
13205E5459: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-054-1685
Mending Plate

270541685
98020676: RNCC: 3 | RNVC: 2

3 Aug 2011

5340-27-027-6921
Mounting Bracket

270276921
M52T3011R450125: RNCC: 2 | RNVC: 1

20 Oct 2005

5340-27-055-2300
Corner Brace

270552300
6111.5500-14: RNCC: 2 | RNVC: 1
6111.5500-13: RNCC: 2 | RNVC: 1
6111.5500-12: RNCC: 2 | RNVC: 1
6111.5500-15: RNCC: 2 | RNVC: 1

22 Nov 2011

5340-27-020-7859
Mounting Bracket

270207859
1009.1KI.0264-1*1-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-1726
Mounting Bracket

270571726
2.HIBM-5G-0359: RNCC: 2 | RNVC: 1

28 Jun 2012

5340-27-054-6665
Mounting Bracket

270546665
55RS753007: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-036-8263
Access Cover

270368263
40.270.3003: RNCC: 2 | RNVC: 1
40.270.3003: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-006-0907
Expansion Plug

270060907
5K12566: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-020-4788
Mounting Bracket

270204788
98014132: RNCC: 2 | RNVC: 1

9 Dec 2003

5340-27-011-2436
Butt Hinge

270112436
07002YM0309: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-056-4999
Mending Plate

270564999
203426: RNCC: 2 | RNVC: 2

4 Apr 2012

5340-27-026-0127
Mounting Bracket

270260127
1604402581: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-058-9064
Access Cover

270589064
M351F604020200: RNCC: 2 | RNVC: 1

29 Apr 2013

5340-27-023-1128
Mounting Bracket

270231128
2ABM 1MK 0034: RNCC: 2 | RNVC: 1

28 May 2004

5340-27-053-9231
Mending Plate

270539231
109961: RNCC: 2 | RNVC: 2

7 Jul 2011

5340-27-025-7866
Mounting Bracket

270257866
1010FG-1803137: RNCC: 2 | RNVC: 1

12 Apr 2005

5340-27-015-0355
Loop Clamp

270150355
7057338: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-057-5557
Mounting Bracket

270575557
M539F321700600: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-028-4858
Mounting Bracket

270284858
72A05-73171-AA: RNCC: 2 | RNVC: 1

4 Jan 2006

5340-27-050-5102
Bridge Clamp

270505102
DIN-3015-L-KP-1-R-8-PA: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-011-0889
Flush Catch Claw

270110889
7115310315: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-024-8569
Mounting Bracket

270248569
1010FK-1802048: RNCC: 2 | RNVC: 1

11 Dec 2004

5340-27-014-2221
Lock Key

270142221
H306X0610: RNCC: 2 | RNVC: 1

26 Sep 2002

5340-27-019-5482
Bail Handle

270195482
07002YK0091: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-7124
Mounting Bracket

270407124
PLK21: RNCC: 2 | RNVC: 1

5 Mar 2008

5340-27-005-1482
Bridge Clamp

270051482
1010000360: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-020-1302
Loop Clamp

270201302
6000046029: RNCC: 2 | RNVC: 1
90464-13073-00: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-043-0228
Angle Bracket

270430228
40.780.2003: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-018-6546
Mounting Bracket

270186546
1010FG-1201736: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-026-0672
Bail Handle

270260672
29052: RNCC: 2 | RNVC: 1

30 May 2005

5340-27-006-9174
Mounting Bracket

270069174
91AG 9N124 AA: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-043-0026
Mounting Bracket

270430026
40.626.0101: RNCC: 2 | RNVC: 1
40.626.0101: RNCC: 2 | RNVC: 1

24 Sep 2008

5340-27-007-0211
Mounting Bracket

270070211
91AG A10202 AG: RNCC: 2 | RNVC: 1

13 Jul 1999

5340-27-048-7992
Access Cover

270487992
7055-21: RNCC: 2 | RNVC: 1
7055-21: RNCC: 5 | RNVC: 9

2 Mar 2010

5340-27-001-7443
Rod End Clevis

270017443
TM55-1520-210-2204-050-170-1: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-005-6299
Angle Bracket

270056299
86VB-V24604-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-027-8311
Mending Plate

270278311
72A06-73148-AA: RNCC: 2 | RNVC: 1

9 Nov 2005

5340-27-055-6955
Access Cover

270556955
5117734: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-055-9127
Mounting Bracket

270559127
102188: RNCC: 2 | RNVC: 2

13 Jan 2012

5340-27-019-2630
Mounting Bracket

270192630
10131YB0102: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-006-2844
Leather Strap

270062844
MTC1359-LD: RNCC: 3 | RNVC: 2

11 Mar 1999

5340-27-044-9191
Bow Handle

270449191
02008-TRS-10-0000-15: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-27-049-1000
Bow Handle

270491000
8200449008: RNCC: 3 | RNVC: 2

1 Apr 2010

5340-27-008-1266
Handle Grip

270081266
7148: RNCC: 2 | RNVC: 1

19 Jul 2000

5340-27-013-3118
Mortise Lock

270133118
53400767800019: RNCC: 2 | RNVC: 1

29 May 2002

5340-27-015-0387
Loop Clamp

270150387
7392321: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-044-2032
Mounting Bracket

270442032
12E00-78345-AA: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-021-3490
Mounting Bracket

270213490
1009.1KI.0330-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-2665
Access Cover

270592665
2.04.01.00.021: RNCC: 5 | RNVC: 9

2 Jul 2013

5340-27-054-8384
Mounting Bracket

270548384
54201235: RNCC: 2 | RNVC: 1

18 Oct 2011

5340-27-057-4383
Mending Plate

270574383
030016030100: RNCC: 2 | RNVC: 1

7 Aug 2012

5340-27-050-2152
Mounting Bracket

270502152
4388117136: RNCC: 3 | RNVC: 2

7 Jul 2010

5340-27-006-9031
Vehicular Bumper

270069031
2108850221: RNCC: 2 | RNVC: 1
A 435 520 27 70: RNCC: 2 | RNVC: 1

22 Jun 1999

5340-27-035-9239
Plug Button

270359239
735419554: RNCC: 2 | RNVC: 1

10 Apr 2007

5340-27-019-1972
Mounting Bracket

270191972
98000356: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-057-7784
Mortise Lock

270577784
189 3MF: RNCC: 2 | RNVC: 1

19 Oct 2012

5340-27-056-3070
Filler Opening Cap

270563070
8000TE-25: RNCC: 5 | RNVC: 9

13 Mar 2012

5340-27-018-6879
Mounting Bracket

270186879
1010FG-1804495: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-6317
Mounting Bracket

270546317
1010FMA-0000495-2: RNCC: 2 | RNVC: 1

3 Oct 2011

5340-27-059-8970
Mounting Bracket

270598970
LRN-0031: RNCC: 2 | RNVC: 1

4 Dec 2013

5340-27-016-8193
Mounting Bracket

270168193
8K16788: RNCC: 2 | RNVC: 1

18 Mar 2003

5340-27-023-1744
Angle Bracket

270231744
98010184: RNCC: 2 | RNVC: 1

3 Jun 2004

5340-27-058-4005
Mending Plate

270584005
03282351: RNCC: 2 | RNVC: 1

22 Jan 2013

5340-27-049-8474
Mending Plate

270498474
108297: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-022-9480
Angle Bracket

270229480
1010FK-0000116: RNCC: 2 | RNVC: 1

7 May 2004

5340-27-019-7269
Truss Fairlead

270197269
IV102/400318: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-059-7267
Filler Opening Cap

270597267
1500.05.0002: RNCC: 2 | RNVC: 1

9 Oct 2013

5340-27-022-7879
Mechanical Stop

270227879
2.05.03.07: RNCC: 2 | RNVC: 1
1932070323: RNCC: 2 | RNVC: 1

21 Apr 2004

5340-27-017-3660
Mending Plate

270173660
1009.1IS.0087-11: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-060-0158
Leakproof Seal Plug

270600158
10086797: RNCC: 2 | RNVC: 1

25 Dec 2013

5340-27-048-9229
Angle Bracket

270489229
10029343: RNCC: 2 | RNVC: 1

18 Mar 2010

5340-27-005-9375
Plug Button

270059375
W701065S303: RNCC: 2 | RNVC: 1

6 Mar 1998

5340-27-034-0219
Catch Strike

270340219
13D00-58400-AA: RNCC: 2 | RNVC: 1

4 Dec 2006

5340-27-037-8597
Mounting Bracket

270378597
69675-51K00: RNCC: 5 | RNVC: 9

31 Aug 2007

5340-27-041-4339
Mending Plate

270414339
45245: RNCC: 2 | RNVC: 1

23 May 2008

5340-27-056-8658
Mending Plate

270568658
203281: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-057-0178
Mounting Bracket

270570178
201126: RNCC: 2 | RNVC: 1

8 Jun 2012

5340-27-056-4628
Mending Plate

270564628
203229: RNCC: 2 | RNVC: 2

2 Apr 2012

5340-27-059-4742
Loop Clamp

270594742
VOE1676424: RNCC: 3 | RNVC: 2
VOE1676424: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-27-040-4141
Crank Handle

270404141
8353828: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-036-0095
Bow Handle

270360095
12E00-57006-AA: RNCC: 2 | RNVC: 1

18 Apr 2007

5340-27-035-5092
Mounting Bracket

270355092
8694647: RNCC: 2 | RNVC: 1

15 Mar 2007

5340-27-053-3270
Mounting Bracket

270533270
H231100301: RNCC: 2 | RNVC: 1

19 Apr 2011

5340-27-024-8644
Access Cover

270248644
44G-009-2100: RNCC: 2 | RNVC: 1

11 Dec 2004

5340-27-051-4899
Mounting Bracket

270514899
400282-008: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-27-013-6590
Mortise Lock

270136590
5340-07678-00005: RNCC: 2 | RNVC: 1
CEKMECE KILIDI: RNCC: 2 | RNVC: 1
1308IYK000004: RNCC: 5 | RNVC: 9

10 Jul 2002

5340-27-033-8258
Bow Handle

270338258
HA 20-19: RNCC: 2 | RNVC: 1

20 Nov 2006

5340-27-039-2382
Mounting Bracket

270392382
83A24-73249-AA: RNCC: 2 | RNVC: 1
83A24-73249-AB: RNCC: 2 | RNVC: 1
83A24-73257-AA: RNCC: 2 | RNVC: 1

20 Nov 2007

5340-27-038-9820
Angle Bracket

270389820
901-TS-314C: RNCC: 2 | RNVC: 1

7 Nov 2007

5340-27-028-8346
Loop Clamp

270288346
71A70-33137-AA: RNCC: 2 | RNVC: 1

10 Feb 2006

5340-27-057-9881
Mounting Bracket

270579881
40159-ZY3-000: RNCC: 2 | RNVC: 1

27 Nov 2012

5340-27-048-4472
Bow Handle

270484472
61201-94050-27: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-27-058-0921
Mounting Bracket

270580921
32111-ZY3-010: RNCC: 2 | RNVC: 1

7 Dec 2012

5340-27-024-4827
Sliding Door Track

270244827
87251-25000: RNCC: 2 | RNVC: 1

3 Nov 2004

5340-27-021-1295
Mending Plate

270211295
1010FG-0000496: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-0058
Angle Bracket

270170058
6040-0533-9025: RNCC: 2 | RNVC: 1

28 Apr 2003

5340-27-029-7379
Mending Plate

270297379
86221-52060: RNCC: 5 | RNVC: 9

8 May 2006

5340-27-028-7767
Mounting Bracket

270287767
884-5800-982: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-021-1292
Mending Plate

270211292
1010FG-0000494: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-3539
Strapping

270213539
8135-01750-00002: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-018-6751
Mounting Bracket

270186751
1010FG-1801348: RNCC: 2 | RNVC: 1
HSN06-018: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-8427
Loop Clamp

270508427
90465-13M36: RNCC: 3 | RNVC: 2
90465-13M36: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-054-3015
Arched Cushion

270543015
98020368: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-016-9285
Turnbuckle

270169285
8AT.700.006: RNCC: 2 | RNVC: 1

11 Apr 2003

5340-27-024-7809
Strap Fastener Loop

270247809
10131MM0023: RNCC: 2 | RNVC: 1

2 Dec 2004

5340-27-013-2281
Strap Fastener Loop

270132281
TOKA-60X40MM: RNCC: 2 | RNVC: 1

22 May 2002

5340-27-054-4429
Arched Cushion

270544429
98023019: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-27-016-8214
Corner Brace

270168214
10091AD0012-2: RNCC: 2 | RNVC: 1

18 Mar 2003

5340-27-053-2136
Turnbuckle

270532136
901-CD-86-D6: RNCC: 2 | RNVC: 1

8 Apr 2011

5340-27-053-0720
Bow Handle

270530720
104609: RNCC: 2 | RNVC: 2

24 Mar 2011

5340-27-017-3642
Mending Plate

270173642
1009.1IS.0068-B/32: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-044-5893
Mending Plate

270445893
502-21-CN-0112: RNCC: 2 | RNVC: 2

19 Feb 2009

5340-27-027-8028
Catch Strike

270278028
71B22-55501-AA: RNCC: 2 | RNVC: 1

7 Nov 2005

5340-27-040-2859
Angle Bracket

270402859
Y532-66018-201: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-021-5365
Mending Plate

270215365
1010FK-0000146: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-032-7854
Mounting Bracket

270327854
72A54-61400-AA: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-020-7562
Mounting Bracket

270207562
1009.1KI.0264-1*2-6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-6624
Loop Clamp

270596624
901-KL-348: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-056-4451
Mending Plate

270564451
202902: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-008-6496
Strap Hinge Leaf

270086496
98001441: RNCC: 2 | RNVC: 1

8 Dec 2000

5340-27-040-4651
Mounting Bracket

270404651
44548: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-052-4160
Loop Clamp

270524160
0009957101: RNCC: 2 | RNVC: 1

20 Jan 2011

5340-27-024-6547
Loop Clamp

270246547
5116793: RNCC: 2 | RNVC: 1

25 Nov 2004

5340-27-019-7901
Expansion Plug

270197901
05001DK0063: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-056-3454
Access Cover

270563454
3833407: RNCC: 2 | RNVC: 2

15 Mar 2012

5340-27-027-4192
Mending Plate

270274192
33266-12021: RNCC: 2 | RNVC: 1

3 Oct 2005

5340-27-052-3857
Bow Handle

270523857
72A62-55514-AA: RNCC: 2 | RNVC: 1

17 Jan 2011

5340-27-054-6661
Mounting Bracket

270546661
55RS752999: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-047-8735
Mounting Bracket

270478735
13H00-72782-AA: RNCC: 2 | RNVC: 1

21 Dec 2009

5340-27-050-6709
Mounting Bracket

270506709
321E68: RNCC: 2 | RNVC: 1

16 Aug 2010

5340-27-021-8917
Mounting Bracket

270218917
KMS 0013: RNCC: 2 | RNVC: 1

9 Jan 2004

5340-27-055-6892
Mounting Bracket

270556892
55RS251875: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-053-7950
Handle Grip

270537950
901-MS-15-40: RNCC: 2 | RNVC: 1

22 Jun 2011

5340-27-036-0512
Loop Clamp

270360512
13C00-03666-AA: RNCC: 2 | RNVC: 1

24 Apr 2007

5340-27-035-0401
Mounting Bracket

270350401
901-TK-278: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-043-8100
Mounting Bracket

270438100
12E00-01776-AA: RNCC: 2 | RNVC: 1

16 Dec 2008

5340-27-048-7644
Mounting Bracket

270487644
9036-02: RNCC: 2 | RNVC: 1
9036-02: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-053-9392
Utility Access Door

270539392
900X2050: RNCC: 2 | RNVC: 1

8 Jul 2011

5340-27-042-0518
Mounting Bracket

270420518
Y531-61002-205: RNCC: 2 | RNVC: 1

15 Jul 2008

5340-27-001-7247
Loop Clamp

270017247
TM55-1520-210-2EAB-700-11: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-001-7717
Rod End Clevis

270017717
TM55-2810-221-347683: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-028-7543
Mounting Bracket

270287543
884-5810-936: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-059-7654
Mounting Bracket

270597654
9999-0000-0342: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-053-8292
Latch Bar

270538292
C171-100040: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-27-018-6314
Strapping Seal

270186314
1010FG-0306105: RNCC: 2 | RNVC: 1
1010FG-0306105: RNCC: 2 | RNVC: 1
EFE-6314: RNCC: 5 | RNVC: 9

15 Nov 2003

5340-27-053-3942
Loop Clamp

270533942
NO7/4050070: RNCC: 2 | RNVC: 1

28 Apr 2011

5340-27-055-8661
Mounting Bracket

270558661
1692-0229: RNCC: 2 | RNVC: 1

11 Jan 2012

5340-27-005-1730
Access Cover

270051730
1010000662: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-020-7558
Mounting Bracket

270207558
1009.1KI.0264-1*2-8: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-041-4088
Utility Access Door

270414088
175X241 CM AL CIFT: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-006-9069
Angle Bracket Set

270069069
A 436 520 71 92: RNCC: 2 | RNVC: 1
A 436 520 7192: RNCC: 5 | RNVC: 9

23 Jun 1999

5340-27-021-9406
Mounting Bracket

270219406
KMS 0021: RNCC: 2 | RNVC: 1

14 Jan 2004

5340-27-024-2638
Mounting Bracket

270242638
92140-25500: RNCC: 2 | RNVC: 1

7 Oct 2004

5340-27-008-7053
Access Cover

270087053
DR-00032-00: RNCC: 2 | RNVC: 1

19 Dec 2000

5340-27-001-7270
Loop Clamp

270017270
CESSNA-185-PARTMS21919DE2: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-023-5434
Webbing Strap

270235434
8690520: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-042-9862
Mounting Bracket

270429862
40.623.0146: RNCC: 2 | RNVC: 1
40.623.0146: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-041-8807
Mounting Bracket

270418807
05005: RNCC: 2 | RNVC: 1
05005: RNCC: 2 | RNVC: 1

27 Jun 2008

5340-27-013-3059
Mending Plate

270133059
46750029: RNCC: 2 | RNVC: 1

29 May 2002

5340-27-053-7309
Mending Plate

270537309
M3-FGL-20: RNCC: 5 | RNVC: 9

13 Jun 2011

5340-27-007-1721
Retaining Clip

270071721
E 864262 S71M: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-048-4073
Bow Handle

270484073
300024: RNCC: 3 | RNVC: 2

8 Feb 2010

5340-27-043-0920
Butt Hinge

270430920
2ABEP00937: RNCC: 2 | RNVC: 1

10 Oct 2008

5340-27-047-4907
Strap Fastener Loop

270474907
TOKA-DILSIZ: RNCC: 2 | RNVC: 1

4 Dec 2009

5340-27-005-6349
Angle Bracket

270056349
95VT-V28136-CA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-029-1513
Catch Strike

270291513
46461037: RNCC: 2 | RNVC: 1

6 Mar 2006

5340-27-005-3872
Synchro Clamp

270053872
1.HIBM-1I-1587-1: RNCC: 3 | RNVC: 2

16 Jul 1997

5340-27-055-3387
Mounting Bracket

270553387
1692-0121: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-007-1740
Retaining Clip

270071740
E 865628 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-049-4697
Mounting Bracket

270494697
104509: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-025-9698
Bow Handle

270259698
897853802201: RNCC: 2 | RNVC: 1

11 May 2005

5340-27-013-5214
Mending Plate

270135214
88.62941.0023: RNCC: 2 | RNVC: 1

25 Jun 2002

5340-27-056-8659
Mending Plate

270568659
98017239: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-041-3348
Mounting Bracket

270413348
73A15-61246-AA: RNCC: 2 | RNVC: 1
GU1S30003A-CGLT: RNCC: 2 | RNVC: 1

14 May 2008

5340-27-024-5027
Mounting Bracket

270245027
73-3579-1215: RNCC: 2 | RNVC: 1

5 Nov 2004

5340-27-021-0534
Mending Plate

270210534
1010FG-0000461: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-6634
Loop Clamp

270596634
901-KL-384: RNCC: 2 | RNVC: 1

25 Sep 2013

5340-27-053-6861
Butt Hinge

270536861
C171-700120: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-27-053-9665
Mounting Bracket

270539665
55RS650811: RNCC: 2 | RNVC: 1

12 Jul 2011

5340-27-051-4152
Mending Plate

270514152
109144: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-007-1707
Retaining Clip

270071707
E 860504 S103: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-022-9075
Mounting Bracket

270229075
3.03.01.06: RNCC: 2 | RNVC: 1

4 May 2004

5340-27-025-9570
Angle Bracket

270259570
209-060-599-1: RNCC: 2 | RNVC: 1

10 May 2005

5340-27-055-4287
Mending Plate

270554287
5093339: RNCC: 2 | RNVC: 2

5 Dec 2011

5340-27-019-5617
Escutcheon Plate

270195617
07002YA0137: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-027-2581
Angle Bracket

270272581
15-01-463-001: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-059-6838
Loop Clamp

270596838
901-KL-403: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-029-6660
Mending Plate

270296660
5LV-25317-00-00: RNCC: 5 | RNVC: 9

28 Apr 2006

5340-27-051-3134
Crank Handle

270513134
55RS065121: RNCC: 2 | RNVC: 1

14 Oct 2010

5340-27-055-5271
Mounting Bracket

270555271
203021: RNCC: 2 | RNVC: 2

9 Dec 2011

5340-27-040-9888
Utility Access Door

270409888
0-222: RNCC: 2 | RNVC: 1

16 Apr 2008

5340-27-042-8195
Mounting Bracket

270428195
592773-L: RNCC: 2 | RNVC: 1

12 Sep 2008

5340-27-020-7527
Mounting Bracket

270207527
1009.1KI.0130-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-012-1449
Mounting Bracket

270121449
10131YS0819: RNCC: 2 | RNVC: 1

6 Mar 2002

5340-27-018-6457
Mounting Bracket

270186457
1010FG-0608092: RNCC: 2 | RNVC: 1
1010FG-0608092: RNCC: 5 | RNVC: 9

15 Nov 2003

5340-27-049-9659
Tee Hinge

270499659
HI01-00-048-41: RNCC: 2 | RNVC: 2
HI01-00-048-41: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-039-2600
Catch Strike

270392600
KD-012/10-111: RNCC: 2 | RNVC: 1
TYPE 111: RNCC: 5 | RNVC: 9

21 Nov 2007

5340-27-013-1340
Flush Catch

270131340
6030-0532-8009: RNCC: 2 | RNVC: 1
6030-0532-8009: RNCC: 2 | RNVC: 1

30 Apr 2002

5340-27-012-6438
Flush Catch

270126438
41-1059-3.5: RNCC: 2 | RNVC: 1
41-1059-3.5: RNCC: 2 | RNVC: 1

27 Feb 2002

5340-27-017-8298
Mounting Bracket

270178298
6003-0532-8005: RNCC: 2 | RNVC: 1

17 Sep 2003

5340-27-001-7715
Loop Clamp

270017715
TM55-1520-210-347-614-053-1: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-021-1581
Mounting Bracket

270211581
1009.1KI.0143-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-8969
Mounting Bracket

270208969
1009.1KI.0252-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-040-5191
Mounting Bracket

270405191
11655335-2: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-007-1460
Mounting Bracket

270071460
A 425 620 15 30: RNCC: 2 | RNVC: 1

7 Sep 1999

5340-27-025-4664
Flush Lock

270254664
H24C6-42731: RNCC: 2 | RNVC: 1

21 Mar 2005

5340-27-040-2147
Mounting Bracket

270402147
40-205-5303: RNCC: 2 | RNVC: 1
40-205-5303: RNCC: 2 | RNVC: 1

14 Jan 2008

5340-27-057-8810
Mounting Bracket

270578810
32114-ZW9-730: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-038-8658
Mounting Bracket

270388658
65506-5K302: RNCC: 5 | RNVC: 9

2 Nov 2007

5340-27-058-0168
Mounting Bracket

270580168
38414-ZZ5-003: RNCC: 2 | RNVC: 1

30 Nov 2012

5340-27-019-9938
Catch Strike

270199938
11051YK0287: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-028-1391
Mounting Bracket

270281391
377773616101: RNCC: 2 | RNVC: 1

6 Dec 2005

5340-27-043-2477
Mounting Bracket

270432477
9323-1520-21: RNCC: 2 | RNVC: 1

22 Oct 2008

5340-27-026-8666
Mounting Bracket

270268666
20405789-7: RNCC: 2 | RNVC: 1
20405789: RNCC: 3 | RNVC: 1
20405789: RNCC: 3 | RNVC: 1

8 Aug 2005

5340-27-050-7652
Mounting Bracket

270507652
13E40-22140-AA: RNCC: 2 | RNVC: 1

25 Aug 2010

5340-27-028-8083
Mending Plate

270288083
7680958: RNCC: 2 | RNVC: 1

8 Feb 2006

5340-27-015-0502
Angle Bracket

270150502
1010FK-1811563: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-043-6454
Mounting Bracket

270436454
YS 01 03 07: RNCC: 3 | RNVC: 2

28 Nov 2008

5340-27-013-7342
Bow Handle

270137342
9128 C1: RNCC: 2 | RNVC: 1

17 Jul 2002

5340-27-020-7831
Mending Plate

270207831
1009.1KI.0229-11/4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-6184
Mounting Bracket

270286184
MM-7450-0096-KNM50: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-059-3148
Mending Plate

270593148
98023546: RNCC: 2 | RNVC: 1

11 Jul 2013

5340-27-004-5116
Access Cover

270045116
10121YK5250: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-054-7176
Mending Plate

270547176
98022779: RNCC: 2 | RNVC: 2

10 Oct 2011

5340-27-006-9520
Mounting Bracket

270069520
95AG A024A14 AG: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-041-8257
Support Hook

270418257
112594: RNCC: 5 | RNVC: 9

20 Jun 2008

5340-27-023-0488
Mounting Bracket

270230488
2ABM 1MK 0041: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-023-2293
Expansion Plug

270232293
2ABMK 00272: RNCC: 2 | RNVC: 1

9 Jun 2004

5340-27-023-2594
Butt Hinge Leaf

270232594
1010FK-1809783: RNCC: 2 | RNVC: 1

12 Jun 2004

5340-27-015-0410
Loop Clamp

270150410
7715167: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-001-7892
Loop Clamp

270017892
E-AB-205-153-4 MS21919WDG-7: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-017-5367
Mounting Bracket

270175367
MP001031: RNCC: 2 | RNVC: 1
JC-00010-006: RNCC: 2 | RNVC: 1

11 Jul 2003

5340-27-059-5506
Angle Bracket

270595506
901-DS-117: RNCC: 2 | RNVC: 1

4 Sep 2013

5340-27-018-4322
Flush Catch Claw

270184322
3011R30200007: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-052-7642
Bow Handle

270527642
898067938001: RNCC: 2 | RNVC: 1

22 Feb 2011

5340-27-004-5135
Access Cover

270045135
10121YK5392: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-040-4895
Catch Strike

270404895
7782044789: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-047-2432
Bumper

270472432
1010FK-2808807: RNCC: 2 | RNVC: 1

16 Nov 2009

5340-27-032-2768
Mounting Bracket

270322768
72B13-73224-AA: RNCC: 2 | RNVC: 1

13 Jun 2006

5340-27-011-0706
Mechanical Stop

270110706
7116220822: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-010-0382
Bridge Clamp

270100382
81.46433.0005: RNCC: 2 | RNVC: 1

24 Oct 2001

5340-27-024-7032
Loop Clamp

270247032
05001FK0223: RNCC: 2 | RNVC: 1

26 Nov 2004

5340-27-040-2786
Strap Hinge

270402786
Y531-61001-200: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-006-9217
Mounting Bracket

270069217
91AG A20468 AB: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-004-3210
Rod End Clevis

270043210
05001YC0003: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-006-9506
Mounting Bracket

270069506
95AT A24199 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-040-3139
Mounting Bracket

270403139
8364709: RNCC: 2 | RNVC: 1

18 Jan 2008

5340-27-004-7946
Access Cover

270047946
10091YK5112: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-049-5813
Bow Handle

270495813
7335711977: RNCC: 2 | RNVC: 2
138-47: RNCC: 2 | RNVC: 2
7335711977: RNCC: 3 | RNVC: 2

11 May 2010

5340-27-057-5258
Mending Plate

270575258
ALTFC01060: RNCC: 2 | RNVC: 1

27 Aug 2012

5340-27-013-2346
Elastic Strap

270132346
1010003226: RNCC: 2 | RNVC: 1

17 May 2002

5340-27-045-7505
Angle Bracket

270457505
10029186: RNCC: 2 | RNVC: 1

10 Jun 2009

5340-27-022-0857
Access Cover

270220857
C040 0109M4: RNCC: 2 | RNVC: 1

9 Feb 2004

5340-27-054-6037
Mounting Bracket

270546037
55RS752958: RNCC: 3 | RNVC: 2

30 Sep 2011

5340-27-022-6742
Mounting Bracket

270226742
29746T: RNCC: 2 | RNVC: 1

7 Apr 2004

5340-27-017-7985
Mounting Bracket

270177985
98013048: RNCC: 2 | RNVC: 1

5 Sep 2003

5340-27-015-0396
Loop Clamp

270150396
7407034: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-049-4922
Mending Plate

270494922
107460: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-022-9074
Mounting Bracket

270229074
3.03.01.05: RNCC: 2 | RNVC: 1

4 May 2004

5340-27-054-3899
Mounting Bracket

270543899
55RS451281: RNCC: 2 | RNVC: 1

5 Sep 2011

5340-27-015-7296
Butt Hinge

270157296
16001DM0079: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-044-0317
Utility Access Door

270440317
1540X2150MM,PVC: RNCC: 2 | RNVC: 1

29 Dec 2008

5340-27-041-3618
Mounting Bracket

270413618
GU1B13201A: RNCC: 2 | RNVC: 1

15 May 2008

5340-27-053-9044
Mounting Bracket

270539044
H346034300: RNCC: 2 | RNVC: 1

5 Jul 2011

5340-27-020-7552
Mending Plate

270207552
1009.1KI.0229-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-7667
Lock-Release Lever

270537667
1011 1YT 3504: RNCC: 2 | RNVC: 1

16 Jun 2011

5340-27-027-6044
Mounting Bracket

270276044
71A00-30462-AA: RNCC: 2 | RNVC: 1

13 Oct 2005

5340-27-017-6941
Mounting Bracket

270176941
H-39-3573-50: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-027-2563
Angle Bracket

270272563
15-01-134-005: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-055-5956
Rod End Clevis

270555956
F99/60050: RNCC: 2 | RNVC: 1

14 Dec 2011

5340-27-056-7093
Mounting Bracket

270567093
MM-7412-0176: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-060-0568
Mounting Bracket

270600568
MM-7490-0350: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-049-7717
Bow Handle

270497717
897405314151: RNCC: 2 | RNVC: 1

28 May 2010

5340-27-010-2322
Mounting Bracket

270102322
98003467: RNCC: 2 | RNVC: 1

16 Nov 2001

5340-27-017-5910
Mending Plate

270175910
53RS200112: RNCC: 2 | RNVC: 1

30 Jul 2003

5340-27-052-7509
Mending Plate

270527509
99 2A 100 20R: RNCC: 2 | RNVC: 2

21 Feb 2011

5340-27-018-3204
Mounting Bracket

270183204
421042-3: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-022-0551
Mounting Bracket

270220551
1009 1YY 1379: RNCC: 2 | RNVC: 1

29 Jan 2004

5340-27-048-3586
Loop Clamp

270483586
5420922B: RNCC: 2 | RNVC: 1

2 Feb 2010

5340-27-046-2878
Butt Hinge

270462878
YAPRAK BOY: RNCC: 2 | RNVC: 1
YAPRAK BOY: RNCC: 2 | RNVC: 1

27 Jul 2009

5340-27-008-9029
Mounting Bracket

270089029
98001255: RNCC: 2 | RNVC: 1

14 Feb 2001

5340-27-044-0564
Butt Hinge

270440564
0582: RNCC: 2 | RNVC: 1

2 Jan 2009

5340-27-050-3848
Mending Plate

270503848
104834: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-021-4310
Mounting Bracket

270214310
1012.1HSCA.02-24: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-9233
Bridge Clamp

270289233
71B21-76014-AA: RNCC: 2 | RNVC: 1

16 Feb 2006

5340-27-028-7956
Mending Plate

270287956
35003692: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-054-6785
Mounting Bracket

270546785
55RS752820: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-001-2701
Mounting Plate

270012701
102460005: RNCC: 3 | RNVC: 2

21 Jan 1994

5340-27-052-2105
Utility Access Door

270522105
75X188CM,USTU CAMLI: RNCC: 2 | RNVC: 1

24 Dec 2010

5340-27-021-9909
Mending Plate

270219909
1009 1KI 0274-1/1: RNCC: 2 | RNVC: 1

20 Jan 2004

5340-27-001-2951
Loop Clamp

270012951
205-030-407-167: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-044-1577
Mounting Bracket

270441577
AMJP24IP14: RNCC: 2 | RNVC: 1

13 Jan 2009

5340-27-044-5350
Mounting Bracket

270445350
YC15V26494AC: RNCC: 2 | RNVC: 1

13 Feb 2009

5340-27-048-4948
Mending Plate

270484948
HD115166: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-27-041-3247
Mending Plate

270413247
7253360: RNCC: 2 | RNVC: 1

14 May 2008

5340-27-021-8600
Mounting Bracket

270218600
1009 1YA 0058: RNCC: 2 | RNVC: 1

7 Jan 2004

5340-27-022-4020
Mounting Bracket

270224020
31605MBTD10: RNCC: 2 | RNVC: 1
31605MBTD10: RNCC: 5 | RNVC: 9

5 Mar 2004

5340-27-045-3366
Mounting Bracket

270453366
6015-8737-3001: RNCC: 2 | RNVC: 1

29 Apr 2009

5340-27-008-5764
Angle Bracket

270085764
6040-0127-4005: RNCC: 2 | RNVC: 1
6040-0127-4005: RNCC: 2 | RNVC: 1

13 Nov 2000

Load More Results