What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 22 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 22 of 53

5340-27-038-7192
Mounting Bracket

270387192
7632733: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-014-3957
Expansion Plug

270143957
51.91606.0062: RNCC: 2 | RNVC: 1

10 Oct 2002

5340-27-033-6272
Mounting Bracket

270336272
2ABEP00005: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-016-7563
Loop Clamp

270167563
2900523: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-054-3793
Mending Plate

270543793
98021994: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-044-3755
Mounting Bracket

270443755
12E01-78036-AA-1: RNCC: 2 | RNVC: 1

30 Jan 2009

5340-27-013-3900
Catch Strike

270133900
1C15 V441A07 AA: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-035-5041
Mounting Bracket

270355041
2ABEP00127: RNCC: 2 | RNVC: 1

15 Mar 2007

5340-27-046-2616
Key Holder

270462616
PLASTIK ANATARLIK: RNCC: 2 | RNVC: 1

24 Jul 2009

5340-27-019-8060
Access Cover

270198060
7708159: RNCC: 2 | RNVC: 1
078888: RNCC: 5 | RNVC: 9

15 Nov 2003

5340-27-004-3226
Loop Clamp

270043226
05001YK0172: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-019-5396
Caster Wheel

270195396
07002YT0193: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-055-8791
Crank Handle

270558791
7701207504: RNCC: 2 | RNVC: 2

12 Jan 2012

5340-27-042-8583
Mounting Bracket

270428583
7702255080: RNCC: 2 | RNVC: 1

16 Sep 2008

5340-27-013-5976
Access Cover

270135976
4169286-2: RNCC: 2 | RNVC: 1

2 Jul 2002

5340-27-053-9980
Mending Plate

270539980
98019834: RNCC: 2 | RNVC: 2

14 Jul 2011

5340-27-013-6636
Butt Hinge

270136636
5340-70119-00004: RNCC: 2 | RNVC: 1
16001-DM-0009: RNCC: 2 | RNVC: 1
22X40MM: RNCC: 2 | RNVC: 1

10 Jul 2002

5340-27-012-5761
Handle Grip

270125761
25V0110700: RNCC: 2 | RNVC: 1

13 Feb 2002

5340-27-046-6806
Access Cover

270466806
Y532-67400-200: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-041-2940
Mending Plate

270412940
7253223: RNCC: 2 | RNVC: 1

12 May 2008

5340-27-017-3874
Mounting Bracket

270173874
1009.1IS.0058-28: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-038-6035
Loop Clamp

270386035
387004131101: RNCC: 2 | RNVC: 1

22 Oct 2007

5340-27-056-7070
Mounting Bracket

270567070
ADOP-SHELTER-180-KMAK: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-060-0373
Mounting Bracket

270600373
MM-7490-0588: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-013-3383
Bow Handle

270133383
88.97001.2017: RNCC: 2 | RNVC: 1

5 Jun 2002

5340-27-052-7511
Mending Plate

270527511
99 2A 100 21R: RNCC: 2 | RNVC: 2

21 Feb 2011

5340-27-036-0258
Bow Handle

270360258
13C00-68548-AA: RNCC: 2 | RNVC: 1

19 Apr 2007

5340-27-013-4540
Mending Plate

270134540
81.42401.5253: RNCC: 2 | RNVC: 1

19 Jun 2002

5340-27-013-2340
Elastic Strap

270132340
1010003224: RNCC: 2 | RNVC: 1

17 May 2002

5340-27-035-8042
Mending Plate

270358042
234661: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-029-1450
Angle Bracket

270291450
1010005550: RNCC: 2 | RNVC: 1

3 Mar 2006

5340-27-048-5683
Catch Strike

270485683
HD279124X: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-054-0271
Mounting Bracket

270540271
55RS551794: RNCC: 2 | RNVC: 1

18 Jul 2011

5340-27-017-4499
Webbing Strap

270174499
BIF750T64: RNCC: 2 | RNVC: 1

26 Jun 2003

5340-27-021-3076
Mending Plate

270213076
1012.1HSCA.02-20: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-4416
Angle Bracket

270584416
M535E661120000: RNCC: 2 | RNVC: 1

31 Jan 2013

5340-27-010-2303
Access Cover

270102303
98003185: RNCC: 2 | RNVC: 1

16 Nov 2001

5340-27-006-9129
Mounting Bracket

270069129
91AG 13K056 AD: RNCC: 2 | RNVC: 1

24 Jun 1999

5340-27-045-4513
Catch Strike

270454513
8B81495: RNCC: 2 | RNVC: 1

8 May 2009

5340-27-023-5328
Snap Hook

270235328
05001FK0159: RNCC: 2 | RNVC: 1

9 Jul 2004

5340-27-007-8121
Loop Clamp

270078121
2512-7001-2069: RNCC: 2 | RNVC: 1
2512-7001-2069: RNCC: 2 | RNVC: 1

23 Feb 2000

5340-27-053-8481
Mounting Bracket

270538481
H343603900: RNCC: 2 | RNVC: 1

28 Jun 2011

5340-27-041-9097
Mending Plate

270419097
07208: RNCC: 2 | RNVC: 1
07208: RNCC: 2 | RNVC: 1

30 Jun 2008

5340-27-012-6365
Mending Plate

270126365
98011278: RNCC: 2 | RNVC: 1

20 Feb 2002

5340-27-042-5667
Mending Plate

270425667
54547203: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-051-4124
Mending Plate

270514124
108032: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-032-6306
Mounting Bracket

270326306
13D05-58305-AA: RNCC: 2 | RNVC: 1

25 Aug 2006

5340-27-049-6123
Bridge Clamp

270496123
1010FG-0302163: RNCC: 2 | RNVC: 1

13 May 2010

5340-27-059-4842
Catch Strike

270594842
13C03-55222-AA: RNCC: 2 | RNVC: 1

23 Aug 2013

5340-27-041-4087
Utility Access Door

270414087
106X215 CM AL: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-049-9675
Mending Plate

270499675
HD110571: RNCC: 2 | RNVC: 2
HD110571: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-017-3649
Mending Plate

270173649
1009.1IS.0071-D12: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-055-0347
Mounting Bracket

270550347
UNV-002: RNCC: 2 | RNVC: 2

31 Oct 2011

5340-27-053-8036
Mending Plate

270538036
C173-1F0001: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-27-005-6358
Track Stop

270056358
86VB-V290B02-AE: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-021-4087
Mounting Bracket

270214087
1009.1KI.0199/1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-001-8054
Loop Clamp

270018054
E-AB-205-T53-4 MS21919WDG-16: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-050-6308
Mounting Bracket

270506308
377AC06: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-27-059-3691
Loop Clamp

270593691
VOE20798837: RNCC: 3 | RNVC: 2

23 Jul 2013

5340-27-027-0856
Loop Clamp

270270856
MB249339: RNCC: 2 | RNVC: 1

1 Sep 2005

5340-27-055-2187
Mounting Bracket

270552187
1692-0165: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-043-4963
Mounting Bracket

270434963
901-UA-5: RNCC: 2 | RNVC: 1

14 Nov 2008

5340-27-021-4562
Rim Lock

270214562
07002YK0352: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-023-6034
Access Cover

270236034
10121YK0540: RNCC: 2 | RNVC: 1

17 Jul 2004

5340-27-058-6546
Mending Plate

270586546
ADOP-SHELTER-280-IK: RNCC: 2 | RNVC: 1

5 Mar 2013

5340-27-023-5441
Mounting Bracket

270235441
M10.1.3.1: RNCC: 2 | RNVC: 1
M10.1.3.1: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-021-4073
Mounting Bracket

270214073
1009.1KI.0104-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-0130
Mounting Bracket

270220130
10131YS1589: RNCC: 2 | RNVC: 1

23 Jan 2004

5340-27-001-2908
Blank Panel

270012908
204-075-266-029: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-021-3074
Mending Plate

270213074
1012.1HSCA.02-10: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-039-3494
Lock-Release Lever

270393494
27001-103: RNCC: 2 | RNVC: 1

27 Nov 2007

5340-27-056-3377
Mounting Bracket

270563377
3834237: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-27-058-1143
Mounting Bracket

270581143
1010FMA-1802024: RNCC: 2 | RNVC: 1

11 Dec 2012

5340-27-021-0462
Mounting Bracket

270210462
1009.1KI.0308-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-013-6969
Access Cover

270136969
98012805: RNCC: 2 | RNVC: 1

15 Jul 2002

5340-27-048-5078
Catch Strike

270485078
HD1500W7-15Y: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-27-055-7988
Access Cover

270557988
5835-1508-7: RNCC: 2 | RNVC: 2

5 Jan 2012

5340-27-050-3858
Mending Plate

270503858
105232: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-024-7767
Webbing Strap

270247767
10131YK2068: RNCC: 2 | RNVC: 1

2 Dec 2004

5340-27-035-5890
Mending Plate

270355890
72B04-61454-AA: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-016-7560
Loop Clamp

270167560
2900520: RNCC: 2 | RNVC: 1
2900520: RNCC: 2 | RNVC: 1
2900520: RNCC: 5 | RNVC: 9

11 Mar 2003

5340-27-032-7769
Mounting Bracket

270327769
13C00-70161-AA: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-018-7026
Mounting Bracket

270187026
1010FK-2810861: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-034-2296
Butt Hinge

270342296
6114-0005645: RNCC: 2 | RNVC: 1

18 Dec 2006

5340-27-054-6628
Mounting Bracket

270546628
55RS752907: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-056-8000
Mending Plate

270568000
202129: RNCC: 2 | RNVC: 1

14 May 2012

5340-27-058-3125
Mending Plate

270583125
0134 0424: RNCC: 2 | RNVC: 1

8 Jan 2013

5340-27-053-8029
Mending Plate

270538029
C175-000010: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-27-048-9669
Mending Plate

270489669
103715: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-051-5611
Mending Plate

270515611
103072: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-27-021-2132
Mounting Bracket

270212132
1012.1HSCA.02-53: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-2741
Mounting Bracket

270592741
55RS851440: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-020-7563
Mending Plate

270207563
1009.1KI.0205/1*2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3875
Mounting Bracket

270173875
1009.1IS.0058-29: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-022-3494
Access Cover

270223494
40059: RNCC: 2 | RNVC: 1

26 Feb 2004

5340-27-044-8560
Catch Strike

270448560
51752848: RNCC: 3 | RNVC: 2

17 Mar 2009

5340-27-058-3834
Access Cover

270583834
37507-37400: RNCC: 5 | RNVC: 9

21 Jan 2013

5340-27-035-3883
Expansion Plug

270353883
3212V004: RNCC: 2 | RNVC: 1

13 Mar 2007

5340-27-043-3505
Flush Catch

270433505
74A05-62222-AA: RNCC: 2 | RNVC: 1

31 Oct 2008

5340-27-040-2862
Angle Bracket

270402862
Y533-71790-200: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-043-2873
Mounting Bracket

270432873
74A07-60459-AA: RNCC: 2 | RNVC: 1

24 Oct 2008

5340-27-007-0191
Tee Hinge

270070191
91AB A67300 AE: RNCC: 2 | RNVC: 1

13 Jul 1999

5340-27-028-1378
Catch Strike

270281378
83A00-57140-AA: RNCC: 2 | RNVC: 1

6 Dec 2005

5340-27-036-6799
Mending Plate

270366799
83A11-55437-AB: RNCC: 2 | RNVC: 1
83A11-55437-AA: RNCC: 2 | RNVC: 1

19 Jun 2007

5340-27-007-2924
Retaining Strap

270072924
H24C2-40701: RNCC: 2 | RNVC: 1
78GG 18C615 DA: RNCC: 2 | RNVC: 1
8584899: RNCC: 2 | RNVC: 1

14 Oct 1999

5340-27-052-7082
Loop Clamp

270527082
DIN3016-1-D1-38-15-W3-CR: RNCC: 2 | RNVC: 2

17 Feb 2011

5340-27-056-8681
Mending Plate

270568681
202268: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-015-0399
Loop Clamp

270150399
7520746: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-021-1725
Access Cover

270211725
1010FK-2701568: RNCC: 2 | RNVC: 1
1010FK-2701568: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-8428
Loop Clamp

270508428
90464-15M08: RNCC: 3 | RNVC: 2
90464-15M08: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-044-2065
Handle Grip

270442065
AMJP24IP8: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-027-8150
Angle Bracket

270278150
1501502074: RNCC: 2 | RNVC: 1

8 Nov 2005

5340-27-041-3448
Mounting Bracket

270413448
GU1S30003A-CGLT: RNCC: 2 | RNVC: 1

15 May 2008

5340-27-004-7892
Access Cover

270047892
10091YK5068: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-043-8059
Mending Plate

270438059
12F146050: RNCC: 2 | RNVC: 1

16 Dec 2008

5340-27-058-3128
Mending Plate

270583128
0490 3047: RNCC: 2 | RNVC: 1

8 Jan 2013

5340-27-050-4146
Mending Plate

270504146
105240: RNCC: 3 | RNVC: 2

26 Jul 2010

5340-27-029-1518
Mending Plate

270291518
60813759: RNCC: 2 | RNVC: 1

6 Mar 2006

5340-27-041-3635
Utility Access Door

270413635
82X200 CM AL: RNCC: 2 | RNVC: 1

15 May 2008

5340-27-018-6844
Mounting Bracket

270186844
1010FG-1803280: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-0552
Mounting Bracket

270480552
150006001: RNCC: 3 | RNVC: 2

30 Dec 2009

5340-27-033-9178
Mounting Bracket

270339178
0000GK0136212: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-058-9983
Mending Plate

270589983
04214361: RNCC: 2 | RNVC: 1

14 May 2013

5340-27-058-8066
Flush Catch

270588066
A-4508-00: RNCC: 2 | RNVC: 1

5 Apr 2013

5340-27-050-0582
Mending Plate

270500582
102857: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-055-2171
Mounting Bracket

270552171
1692-0047: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-024-2825
Mounting Bracket

270242825
1009 1YA 0011: RNCC: 2 | RNVC: 1

8 Oct 2004

5340-27-019-0311
Access Cover

270190311
00304102: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-004-7993
Access Cover

270047993
10091YK5152: RNCC: 3 | RNVC: 2

6 Nov 1996

5340-27-005-1691
Access Cover

270051691
1010000284: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-056-9752
Bow Handle

270569752
7T16K24649AAW: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-27-050-3859
Mending Plate

270503859
105233: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-057-9921
Mounting Bracket

270579921
50311-ZY3-020ZB: RNCC: 2 | RNVC: 1

27 Nov 2012

5340-27-032-2307
Angle Bracket

270322307
209-001-517-2: RNCC: 2 | RNVC: 1

9 Jun 2006

5340-27-054-2047
Mending Plate

270542047
98019047: RNCC: 2 | RNVC: 2

8 Aug 2011

5340-27-058-5462
Mounting Bracket

270585462
VOE12744350: RNCC: 3 | RNVC: 2
VOE12744350: RNCC: 3 | RNVC: 2

19 Feb 2013

5340-27-035-0342
Mounting Bracket

270350342
1010005818: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-013-3922
Bow Handle

270133922
7700750048: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-021-1903
Mounting Bracket

270211903
1012.1HSCA.03-21: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-009-3513
Expansion Plug

270093513
57RS301382: RNCC: 2 | RNVC: 1

20 Jun 2001

5340-27-041-4110
Utility Access Door

270414110
144X143 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-006-9507
Mounting Bracket

270069507
95AT A26696 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-054-0466
Bridge Clamp

270540466
98018920: RNCC: 3 | RNVC: 2

19 Jul 2011

5340-27-044-4080
Mending Plate

270444080
81.97488-0685: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-008-1201
Mounting Bracket

270081201
98001457-2: RNCC: 2 | RNVC: 1

18 Jul 2000

5340-27-057-3198
Mounting Bracket

270573198
SG003036-1: RNCC: 2 | RNVC: 1

18 Jul 2012

5340-27-044-0338
Utility Access Door

270440338
2200X1900MM,PVC: RNCC: 2 | RNVC: 1

29 Dec 2008

5340-27-047-9026
Bridge Clamp

270479026
3" KELEPCE: RNCC: 2 | RNVC: 1

23 Dec 2009

5340-27-007-2042
Access Cover

270072042
E 852034 S: RNCC: 2 | RNVC: 1

23 Sep 1999

5340-27-021-0327
Mounting Bracket

270210327
1009.1KI.0351-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-024-7941
Access Cover

270247941
7707566: RNCC: 2 | RNVC: 1

4 Dec 2004

5340-27-058-8728
Access Cover

270588728
VOE12739483: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-27-043-0229
Mounting Bracket

270430229
40.780.2008: RNCC: 2 | RNVC: 1
40.780.2008: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-015-0398
Loop Clamp

270150398
7520745: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-012-6901
Angle Bracket

270126901
988-6228-001: RNCC: 2 | RNVC: 1

5 Mar 2002

5340-27-058-8612
Bow Handle

270588612
901-TS-401: RNCC: 2 | RNVC: 1

18 Apr 2013

5340-27-033-9259
Mounting Bracket

270339259
10131YB0897: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-018-7503
Synchro Clamp

270187503
917-300SH: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-019-2034
Mounting Bracket

270192034
11001MP0118: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-049-4925
Mending Plate

270494925
107467: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-009-4094
Access Cover

270094094
10131YK0193: RNCC: 2 | RNVC: 1

29 Jun 2001

5340-27-034-6109
Mounting Bracket

270346109
518A01: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-053-7976
Mounting Bracket

270537976
6040-1430-3001: RNCC: 2 | RNVC: 2

22 Jun 2011

5340-27-025-9504
Mounting Bracket

270259504
8371597140: RNCC: 2 | RNVC: 1

9 May 2005

5340-27-020-3463
Support Hook

270203463
101312: RNCC: 2 | RNVC: 1

3 Dec 2003

5340-27-010-2964
Mounting Bracket

270102964
10131YS0810: RNCC: 2 | RNVC: 1

23 Nov 2001

5340-27-028-7772
Mounting Bracket

270287772
884-5800-987: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-042-0738
Mending Plate

270420738
901-BS-144: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-007-7260
Support Hook

270077260
10029-0087: RNCC: 2 | RNVC: 1
10029-0087: RNCC: 2 | RNVC: 1

28 Jan 2000

5340-27-053-7672
Handle Grip

270537672
901-MS-15-20: RNCC: 2 | RNVC: 1

16 Jun 2011

5340-27-054-5358
Mending Plate

270545358
98020074: RNCC: 3 | RNVC: 2

22 Sep 2011

5340-27-045-0493
Mounting Bracket

270450493
10046181: RNCC: 2 | RNVC: 1

1 Apr 2009

5340-27-005-1508
Rod End Connector

270051508
1010000005: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-050-9034
Bow Handle

270509034
12F00-57007-AA: RNCC: 2 | RNVC: 1

14 Sep 2010

5340-27-044-5349
Catch Strike

270445349
8C16V441A07AA: RNCC: 2 | RNVC: 1

13 Feb 2009

5340-27-043-3234
Catch Strike

270433234
180X25X3 MM: RNCC: 2 | RNVC: 1

27 Oct 2008

5340-27-049-8486
Mending Plate

270498486
108588: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-056-7096
Mounting Bracket

270567096
MM-7412-0254: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-058-9430
Mending Plate

270589430
KJR175-183: RNCC: 5 | RNVC: 9

3 May 2013

5340-27-027-8293
Mending Plate

270278293
72A49-563: RNCC: 2 | RNVC: 1

9 Nov 2005

5340-27-013-6785
Bow Handle

270136785
EDK 96/11: RNCC: 2 | RNVC: 1

12 Jul 2002

5340-27-033-0524
Handle Grip

270330524
58RS110809: RNCC: 2 | RNVC: 1

12 Oct 2006

5340-27-050-0716
Mending Plate

270500716
105983: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-055-6882
Mounting Bracket

270556882
3K231847: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-054-8740
Mounting Bracket

270548740
H340500201: RNCC: 2 | RNVC: 1

20 Oct 2011

5340-27-019-2105
Flush Catch Claw

270192105
11001DK0111: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-0453
Mounting Bracket

270540453
98018540: RNCC: 3 | RNVC: 2

19 Jul 2011

5340-27-010-2873
Mounting Bracket

270102873
10131YS0735: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-055-6886
Mounting Bracket

270556886
3K232125: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-043-2876
Mounting Bracket

270432876
74A05-60496-AA: RNCC: 2 | RNVC: 1

24 Oct 2008

5340-27-058-2711
Mounting Bracket

270582711
MM-7490-0068: RNCC: 2 | RNVC: 1

2 Jan 2013

5340-27-032-6443
Loop Clamp

270326443
TS12091-S2-25-40: RNCC: 2 | RNVC: 1

28 Aug 2006

5340-27-019-7408
Bridge Clamp

270197408
W4631011U: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-019-1573
Mounting Bracket

270191573
8620090: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-006-9511
Mounting Bracket

270069511
81AG 9046 BA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-053-2428
Mounting Bracket

270532428
740.06.10.02.031: RNCC: 2 | RNVC: 2

11 Apr 2011

5340-27-012-1533
Mending Plate

270121533
10131YS0921: RNCC: 2 | RNVC: 1

16 Jan 2002

5340-27-007-0719
Mounting Bracket

270070719
91AG 5N181 AA: RNCC: 2 | RNVC: 1

3 Aug 1999

5340-27-048-6220
Mending Plate

270486220
TO152152Y: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-27-048-5334
Mending Plate

270485334
HD205333SY: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-27-058-3855
Access Cover

270583855
37807-17200: RNCC: 5 | RNVC: 9

21 Jan 2013

5340-27-056-4638
Mending Plate

270564638
MM-7560-0370: RNCC: 3 | RNVC: 2

2 Apr 2012

5340-27-051-3135
Crank Handle

270513135
55RS065113: RNCC: 2 | RNVC: 1

14 Oct 2010

5340-27-023-6016
Bridge Clamp

270236016
10131YK0713: RNCC: 2 | RNVC: 1

17 Jul 2004

5340-27-020-7561
Mounting Bracket

270207561
1009.1KI.0264-1*2-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-4171
Flush Catch Claw

270074171
3011R-304310.01: RNCC: 2 | RNVC: 1

9 Nov 1999

5340-27-055-6617
Mortise Lock

270556617
164GNC-19: RNCC: 5 | RNVC: 9

22 Dec 2011

5340-27-039-3463
Mounting Bracket

270393463
F-2562-3-6: RNCC: 2 | RNVC: 1

27 Nov 2007

5340-27-035-7972
Track Stop

270357972
46843061: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-028-7561
Expansion Plug

270287561
57RS301005: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-024-8316
Metal Grille

270248316
150210591: RNCC: 2 | RNVC: 1

9 Dec 2004

5340-27-027-0596
Filler Opening Cap

270270596
M52T3011R600110: RNCC: 2 | RNVC: 1

29 Aug 2005

5340-27-050-9902
Mounting Bracket

270509902
6H4-81822-02-98: RNCC: 3 | RNVC: 2
6H4-81822-02-98: RNCC: 3 | RNVC: 2

22 Sep 2010

5340-27-018-7619
Mending Plate

270187619
0541115-4: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-047-7589
Mounting Bracket

270477589
7700757267: RNCC: 3 | RNVC: 2

16 Dec 2009

5340-27-043-8941
Utility Access Door

270438941
98X198 CM KAPI, ALUMINYUM: RNCC: 2 | RNVC: 1

22 Dec 2008

5340-27-051-1082
Mending Plate

270511082
103768: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-037-6832
Loop Clamp

270376832
14C05-82582-AA: RNCC: 2 | RNVC: 1

20 Aug 2007

5340-27-005-3371
Mounting Bracket

270053371
97U50156: RNCC: 2 | RNVC: 1

29 Jul 1997

5340-27-036-8264
Key Holder

270368264
40.270.0294: RNCC: 2 | RNVC: 1
40.270.0294: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-006-2817
Mounting Bracket

270062817
72A10-30355-AA: RNCC: 3 | RNVC: 2

11 Mar 1999

5340-27-012-6273
Loop Clamp

270126273
620227-17: RNCC: 2 | RNVC: 1
620227-17: RNCC: 2 | RNVC: 1

19 Feb 2002

5340-27-044-4681
Mounting Bracket

270444681
72A33-01713-AA: RNCC: 2 | RNVC: 1

10 Feb 2009

5340-27-018-3032
Mechanical Stop

270183032
10121YP5578: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-3172
Mounting Bracket

270183172
10121YT5486: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-2539
Mending Plate

270402539
7782186290: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-059-2387
Swivel Caster

270592387
HS 001: RNCC: 5 | RNVC: 9

25 Jun 2013

5340-27-037-9400
Mounting Bracket

270379400
911-06-001: RNCC: 2 | RNVC: 1

5 Sep 2007

5340-27-021-8501
T Bracket

270218501
1009 1AD 0027: RNCC: 2 | RNVC: 1

6 Jan 2004

5340-27-043-6906
Utility Access Door

270436906
AL-3530X895 MM: RNCC: 2 | RNVC: 1

2 Dec 2008

5340-27-056-4624
Mending Plate

270564624
203089: RNCC: 2 | RNVC: 2

2 Apr 2012

5340-27-028-8212
Mounting Bracket

270288212
M52T3011R450181: RNCC: 2 | RNVC: 1

9 Feb 2006

5340-27-058-4414
Angle Bracket

270584414
M535E661020000: RNCC: 2 | RNVC: 1

31 Jan 2013

5340-27-006-9224
Mounting Bracket

270069224
91AB F431F78 AC: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-018-8730
Handle Grip

270188730
11051YM0131: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-007-4107
Mounting Bracket

270074107
95AG 3438 AE: RNCC: 2 | RNVC: 1

4 Nov 1999

5340-27-059-0041
Mending Plate

270590041
40.6010.200016 218X120: RNCC: 5 | RNVC: 9

14 May 2013

5340-27-057-9525
Access Cover

270579525
02.005.3103: RNCC: 3 | RNVC: 2

21 Nov 2012

5340-27-012-2467
Mechanical Stop

270122467
70VB 7B520 BA: RNCC: 2 | RNVC: 1

21 Jan 2002

5340-27-024-7852
Catch Strike

270247852
ASMA KILIT APARATI: RNCC: 2 | RNVC: 1

2 Dec 2004

5340-27-007-1820
Retaining Clip

270071820
W 701016 S300: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-048-7940
Butt Hinge

270487940
9035-48: RNCC: 2 | RNVC: 1
9035-48: RNCC: 5 | RNVC: 9

2 Mar 2010

5340-27-028-7861
Loop Clamp

270287861
73A00-32102-AA: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-049-4839
Mending Plate

270494839
107560-106: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-009-9332
Access Cover

270099332
98012348-1: RNCC: 2 | RNVC: 1

11 Oct 2001

5340-27-000-4256
Pelican Hook

270004256
S-27A1: RNCC: 3 | RNVC: 2

10 Mar 1984

5340-27-016-7174
Access Cover

270167174
98012719-1: RNCC: 2 | RNVC: 1

4 Mar 2003

5340-27-020-7837
Mounting Bracket

270207837
1009.1KI.0121-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-7079
Access Cover

270177079
C 040 0110 M4: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-013-1116
Bridge Clamp

270131116
81.97401.0935: RNCC: 2 | RNVC: 1

26 Apr 2002

5340-27-051-4139
Mending Plate

270514139
108232: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-058-9393
Mounting Bracket

270589393
VOE12746499: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-057-6759
Mending Plate

270576759
T-61410: RNCC: 2 | RNVC: 1

21 Sep 2012

5340-27-058-9698
Rod End Clevis

270589698
CH602: RNCC: 3 | RNVC: 2

9 May 2013

5340-27-021-0173
Lever Bracket

270210173
1009.1KI.0130-4*4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-2927
Mounting Bracket

270532927
H341162400: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-005-1498
Loop Clamp

270051498
1010000962: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-034-0176
Mending Plate

270340176
0000GK0241527: RNCC: 2 | RNVC: 1

4 Dec 2006

5340-27-023-0548
Mounting Bracket

270230548
1009 1MK 0013: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-015-8683
Mortise Lock

270158683
99999-NIIN-DA0052449: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-003-8197
Access Cover

270038197
3522-1540-8400: RNCC: 2 | RNVC: 1
3522-1540-8400: RNCC: 3 | RNVC: 1

8 Nov 1994

5340-27-004-5111
Access Cover

270045111
10121YK5130: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-017-9771
Expansion Shield

270179771
8MM CELIK DUBEL: RNCC: 2 | RNVC: 1
CELIK DUBEL 8.LIK: RNCC: 2 | RNVC: 1
M8 CELIK DUBEL: RNCC: 5 | RNVC: 2

20 Oct 2003

5340-27-034-4354
Butt Hinge

270344354
ALYAN: RNCC: 2 | RNVC: 1

5 Jan 2007

5340-27-010-2808
Angle Bracket

270102808
10131YS0776: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-049-1691
Mounting Bracket

270491691
S01 001 0001 1650 014 F 02.L: RNCC: 2 | RNVC: 1

9 Apr 2010

5340-27-037-9956
Support Hook

270379956
KANCA,1 MM.: RNCC: 2 | RNVC: 1

7 Sep 2007

5340-27-042-5651
Mending Plate

270425651
54545892: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-021-0543
Mending Plate

270210543
1010FG-0000330: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-2862
Access Cover

270592862
2.04.05.00.027: RNCC: 5 | RNVC: 9

5 Jul 2013

5340-27-017-0110
Rod End Clevis

270170110
10131YC0183: RNCC: 2 | RNVC: 1

29 Apr 2003

5340-27-013-6633
Mending Plate

270136633
88.66401.4002: RNCC: 2 | RNVC: 1

11 Jul 2002

5340-27-005-1743
Spring Tension Clip

270051743
1010001550: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-045-5941
Mounting Bracket

270455941
K5C 3207: RNCC: 3 | RNVC: 2

15 May 2009

5340-27-018-6696
Mounting Bracket

270186696
1010FK-2703829: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-023-1235
Mounting Bracket

270231235
1010FG-0000397: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-053-4926
Catch Strike

270534926
74GBF220K55AB: RNCC: 2 | RNVC: 1

12 May 2011

5340-27-055-7858
Access Cover

270557858
5098665: RNCC: 2 | RNVC: 2

4 Jan 2012

5340-27-055-4942
Mounting Bracket

270554942
5425302: RNCC: 2 | RNVC: 2

8 Dec 2011

5340-27-013-1993
Mending Plate

270131993
83.41610.0505: RNCC: 2 | RNVC: 1

13 May 2002

5340-27-053-8264
Mending Plate

270538264
C171-000080: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-27-053-3269
Mounting Bracket

270533269
H231100201: RNCC: 2 | RNVC: 1

19 Apr 2011

5340-27-042-9685
Mounting Bracket

270429685
40.205.3440: RNCC: 2 | RNVC: 1
40.205.3440: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-017-3401
Support Hook

270173401
98013746: RNCC: 2 | RNVC: 1

18 Jun 2003

5340-27-024-5929
Mounting Bracket

270245929
8694139: RNCC: 2 | RNVC: 1

13 Nov 2004

5340-27-037-3522
Mending Plate

270373522
73A15-59512-AA: RNCC: 2 | RNVC: 1

24 Jul 2007

5340-27-038-2144
Butt Hinge

270382144
KANATLI, 100MM, SARI: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-020-1789
Bridge Clamp

270201789
7700778348: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-051-1669
Bow Handle

270511669
13F10-72300-AA: RNCC: 2 | RNVC: 1

8 Oct 2010

5340-27-033-0995
Access Cover

270330995
1010FG-1300693: RNCC: 2 | RNVC: 1

19 Oct 2006

5340-27-057-3721
Mending Plate

270573721
020002010300: RNCC: 2 | RNVC: 1

26 Jul 2012

5340-27-006-9071
Angle Bracket Set

270069071
4368117136: RNCC: 2 | RNVC: 1
A 436 811 71 36: RNCC: 2 | RNVC: 1

23 Jun 1999

5340-27-051-0077
Mounting Bracket

270510077
6R3-83614-00: RNCC: 3 | RNVC: 2
6R3-83614-00: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-27-018-3052
Handle Grip

270183052
10121YS5546: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-044-2084
Mounting Bracket

270442084
12E00-70296-AA: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-034-2376
Mounting Bracket

270342376
100017: RNCC: 2 | RNVC: 1

19 Dec 2006

5340-27-018-3231
Mechanical Stop

270183231
10121YD5411: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-035-9557
Plug Button

270359557
7749925: RNCC: 2 | RNVC: 1

12 Apr 2007

5340-27-050-0690
Mending Plate

270500690
103559: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-010-0155
Cover Strip

270100155
DZMA000333: RNCC: 2 | RNVC: 1

22 Oct 2001

5340-27-042-0837
Bow Handle

270420837
44914: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-004-5128
Access Cover

270045128
10121YK5346: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-040-8631
Mending Plate

270408631
ME506844: RNCC: 2 | RNVC: 1

3 Apr 2008

5340-27-049-8525
Tee Hinge

270498525
107499: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-029-6685
Loop Holder

270296685
AYAKLI CERCEVE 5X2,4 METRE: RNCC: 2 | RNVC: 1

1 May 2006

5340-27-020-1501
Flush Catch Claw

270201501
7702256154: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-056-3699
Mounting Bracket

270563699
3834217: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-27-026-4313
Butt Hinge

270264313
10131YM2014: RNCC: 2 | RNVC: 1

7 Jul 2005

5340-27-013-1108
Loop Clamp

270131108
81.97401.0744: RNCC: 2 | RNVC: 1
25115T: RNCC: 2 | RNVC: 1
90465-08028-00: RNCC: 2 | RNVC: 1

26 Apr 2002

5340-27-056-3520
Access Cover

270563520
3834934: RNCC: 2 | RNVC: 2

16 Mar 2012

5340-27-007-3974
Mounting Bracket

270073974
95AG A02557 AD: RNCC: 2 | RNVC: 1

3 Nov 1999

5340-27-037-9516
Bridge Clamp

270379516
PVC 63 LUK: RNCC: 2 | RNVC: 1

6 Sep 2007

5340-27-035-6277
Angle Bracket

270356277
81.48240.5077: RNCC: 2 | RNVC: 1

22 Mar 2007

5340-27-012-8762
Angle Bracket

270128762
98012799: RNCC: 2 | RNVC: 1

29 Mar 2002

5340-27-052-5297
Bridge Clamp

270525297
700325022118: RNCC: 2 | RNVC: 1

4 Feb 2011

5340-27-036-1983
Access Cover

270361983
29-030-029: RNCC: 2 | RNVC: 1
29-030-029: RNCC: 2 | RNVC: 1

10 May 2007

5340-27-018-2401
Access Cover

270182401
3.02.11.06: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-033-7899
Sliding Door Track

270337899
58RS111959: RNCC: 2 | RNVC: 1

17 Nov 2006

5340-27-040-4153
Mounting Bracket

270404153
7737740: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-040-6191
Mending Plate

270406191
12252507: RNCC: 2 | RNVC: 1

4 Feb 2008

5340-27-042-3827
Bow Handle

270423827
96X2: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-020-2186
Handle Grip

270202186
27547: RNCC: 2 | RNVC: 1

18 Nov 2003

5340-27-005-1711
Access Cover

270051711
1010001793: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-014-8029
Rod End Connector

270148029
LCB725: RNCC: 2 | RNVC: 1

2 Dec 2002

5340-27-021-4298
Mounting Bracket

270214298
1010FK-2811755: RNCC: 2 | RNVC: 1
1010FK2811755: RNCC: 2 | RNVC: 1
1010FK-2811755: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-014-7099
Angle Bracket

270147099
6040-0536-7001: RNCC: 2 | RNVC: 1
6040-0536-7001: RNCC: 2 | RNVC: 1

18 Nov 2002

5340-27-050-3872
Mending Plate

270503872
105329: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-006-8225
Access Cover

270068225
062000117: RNCC: 2 | RNVC: 1

17 May 1999

5340-27-054-2476
Mounting Bracket

270542476
H346124500: RNCC: 2 | RNVC: 1

15 Aug 2011

5340-27-018-7115
Access Cover

270187115
1010FK-3506110: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-020-7550
Mounting Bracket

270207550
1009.1KI.0161-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-2002
Retaining Clip

270072002
W 703270 S305: RNCC: 2 | RNVC: 1

22 Sep 1999

5340-27-034-3864
Mounting Bracket

270343864
1.HIBM-1I-2306D23: RNCC: 2 | RNVC: 1

27 Dec 2006

5340-27-024-3402
Mending Plate

270243402
L-147: RNCC: 2 | RNVC: 1

13 Oct 2004

5340-27-055-6878
Mounting Bracket

270556878
52RS000048: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-001-2990
Loop Clamp

270012990
205-030-713-015: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-025-7152
Loop Clamp

270257152
125: RNCC: 2 | RNVC: 1

31 Mar 2005

5340-27-039-7134
Dashpot Piston

270397134
SA 1162-04721: RNCC: 2 | RNVC: 1

14 Dec 2007

5340-27-015-8894
Padlock

270158894
99999-NIIN-DA0029152: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-021-4875
Track Stop

270214875
1010FK-1911407: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-035-3942
Mending Plate

270353942
2C466823AB: RNCC: 2 | RNVC: 1

13 Mar 2007

5340-27-051-7415
Mending Plate

270517415
131200: RNCC: 3 | RNVC: 2

24 Nov 2010

5340-27-024-1768
Mounting Bracket

270241768
1010FG-2201628: RNCC: 2 | RNVC: 1

24 Sep 2004

5340-27-053-9581
Mounting Bracket

270539581
H343313800: RNCC: 2 | RNVC: 1

11 Jul 2011

5340-27-034-1092
Mounting Bracket

270341092
2ABEP00061: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-010-0135
Cover Strip

270100135
DZJF000232: RNCC: 2 | RNVC: 1

22 Oct 2001

5340-27-054-7637
Access Cover

270547637
100458: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-017-1363
Angle Bracket

270171363
ASM6C-08: RNCC: 2 | RNVC: 1

20 May 2003

5340-27-015-8948
Butt Hinge

270158948
99999-NIIN-DA0019950: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-037-2397
Sliding Door Track

270372397
58RS112043: RNCC: 2 | RNVC: 1

19 Jul 2007

5340-27-007-3354
Mounting Bracket

270073354
200 001 006: RNCC: 2 | RNVC: 1
MOD.2.21: RNCC: 2 | RNVC: 1

21 Oct 1999

5340-27-021-4522
Mounting Bracket

270214522
A-544: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-8720
Mending Plate

270568720
98014278-4: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-056-4585
Mending Plate

270564585
201319: RNCC: 2 | RNVC: 2

2 Apr 2012

5340-27-055-0297
Access Cover

270550297
6111.5200-1: RNCC: 2 | RNVC: 1

31 Oct 2011

5340-27-041-7779
Flush Lock

270417779
4-003-017: RNCC: 2 | RNVC: 1

17 Jun 2008

5340-27-017-3887
Mounting Bracket

270173887
1009.1IS.0088-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-043-9351
Lock Key

270439351
02026030006: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-018-3170
Mounting Bracket

270183170
10121YT5484: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-010-2328
Mounting Bracket

270102328
98005656: RNCC: 2 | RNVC: 1

16 Nov 2001

5340-27-054-7865
Mending Plate

270547865
201589: RNCC: 2 | RNVC: 2

14 Oct 2011

5340-27-015-6518
Butt Hinge

270156518
05001HM0034: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-6783
Rod End Clevis

270156783
05001FC0001: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-020-7867
Mending Plate

270207867
1009.1KI.0179-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-7266
Bow Handle

270447266
81.61701-0223: RNCC: 3 | RNVC: 2

9 Mar 2009

5340-27-060-0362
Mounting Bracket

270600362
MM-7490-0194: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-024-7461
Pad Eye

270247461
23070: RNCC: 2 | RNVC: 1

30 Nov 2004

5340-27-058-1888
Mending Plate

270581888
03E-94384-0: RNCC: 2 | RNVC: 1

20 Dec 2012

5340-27-017-7266
Mounting Bracket

270177266
MKE 401 175-X: RNCC: 2 | RNVC: 1

22 Aug 2003

5340-27-024-8036
Access Cover

270248036
44G-009-2101: RNCC: 2 | RNVC: 1

7 Dec 2004

5340-27-021-2664
Rod End Connector

270212664
7335793701: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-013-2337
Flush Catch

270132337
1010003179: RNCC: 2 | RNVC: 1

17 May 2002

5340-27-007-3978
Mounting Bracket

270073978
95AG A101A16 AA: RNCC: 2 | RNVC: 1

3 Nov 1999

5340-27-050-1550
Mending Plate

270501550
103577: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-043-8555
Mounting Bracket

270438555
11000-15030-AA: RNCC: 2 | RNVC: 1

18 Dec 2008

5340-27-020-7848
Mounting Bracket

270207848
1009.1KI.0338-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-045-1749
Mounting Bracket

270451749
1.HIBM-1I-2821D02: RNCC: 2 | RNVC: 1

13 Apr 2009

5340-27-020-9411
Mounting Bracket

270209411
1009.1KI.0264-2*2-9: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-6075
Access Cover

270506075
MP002716: RNCC: 2 | RNVC: 1

10 Aug 2010

5340-27-014-9272
Caster Wheel

270149272
2630-31968-00012: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-028-7927
Mounting Bracket

270287927
72B13-60056-AA: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-049-5863
Angle Bracket

270495863
1980959-4: RNCC: 2 | RNVC: 1

12 May 2010

5340-27-055-5892
Webbing Strap

270555892
MAVI: RNCC: 3 | RNVC: 2

14 Dec 2011

5340-27-018-2236
Rod End Clevis

270182236
1009 1YM 0122: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-008-4205
Mounting Bracket

270084205
6009-0517-9003: RNCC: 2 | RNVC: 1
6009-0517-9003: RNCC: 2 | RNVC: 1

6 Oct 2000

5340-27-028-4860
Mounting Bracket

270284860
72A05-73172-AA: RNCC: 2 | RNVC: 1

4 Jan 2006

5340-27-004-5127
Access Cover

270045127
10121YK5339: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-056-3062
Mounting Bracket

270563062
8000TE-19: RNCC: 5 | RNVC: 9

13 Mar 2012

5340-27-028-7770
Mounting Bracket

270287770
884-5800-985: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-001-7291
Angle Bracket

270017291
TM55-1520-210-2AN743-12: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-059-3282
Mending Plate

270593282
4756344: RNCC: 2 | RNVC: 1

16 Jul 2013

5340-27-014-6051
Bow Handle

270146051
89785362401: RNCC: 2 | RNVC: 1

13 Nov 2002

5340-27-004-7887
Access Cover

270047887
10091YK5070: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-040-4415
Mending Plate

270404415
13D00-66056-AA: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-058-3831
Access Cover

270583831
37807-06100: RNCC: 5 | RNVC: 9

21 Jan 2013

5340-27-050-8998
Access Cover

270508998
63D-48119-00: RNCC: 2 | RNVC: 2

13 Sep 2010

5340-27-022-6250
Mounting Bracket

270226250
23394-2091: RNCC: 2 | RNVC: 1

31 Mar 2004

5340-27-060-0484
Mounting Bracket

270600484
MM-7490-0476: RNCC: 2 | RNVC: 1

2 Jan 2014

5340-27-034-6304
Mounting Bracket

270346304
LCT14T239AA: RNCC: 2 | RNVC: 1

30 Jan 2007

5340-27-048-1920
Catch Strike

270481920
58RS510136: RNCC: 2 | RNVC: 1

18 Jan 2010

5340-27-042-5787
Access Cover

270425787
3977851: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-022-9143
Access Cover

270229143
3.02.01.14: RNCC: 2 | RNVC: 1

4 May 2004

5340-27-021-0736
Catch Strike

270210736
1009.1KI.0130-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-006-8901
Vehicular Bumper

270068901
A 436 520 00 70: RNCC: 2 | RNVC: 1
A4365200070: RNCC: 2 | RNVC: 1

11 Jun 1999

5340-27-007-3858
Retaining Clip

270073858
W 700570 S304M: RNCC: 2 | RNVC: 1

1 Nov 1999

5340-27-051-4693
Angle Bracket

270514693
Y532-68007-200: RNCC: 2 | RNVC: 1

1 Nov 2010

5340-27-032-9477
Bow Handle

270329477
4330321: RNCC: 2 | RNVC: 1

2 Oct 2006

5340-27-058-3478
Mending Plate

270583478
03E-94970-0: RNCC: 2 | RNVC: 1

14 Jan 2013

5340-27-021-1297
Mending Plate

270211297
1010FG-0000495: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-0693
Flush Catch

270210693
10131MM0025: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-008-9281
Detent Plunger

270089281
98000733: RNCC: 2 | RNVC: 1

22 Feb 2001

5340-27-008-7087
Access Cover

270087087
DR-00112-00: RNCC: 2 | RNVC: 1
T530-G2300-000: RNCC: 2 | RNVC: 1

19 Dec 2000

5340-27-042-5445
Loop Clamp

270425445
77.03.083.505: RNCC: 2 | RNVC: 1
7703083505: RNCC: 2 | RNVC: 1

22 Aug 2008

5340-27-004-7951
Access Cover

270047951
10091YK5107: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-005-1554
Bridge Clamp

270051554
1010002060: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-040-6503
Mounting Bracket

270406503
40-770-0096: RNCC: 2 | RNVC: 1

18 Feb 2008

5340-27-017-7150
Access Cover

270177150
C040 0200-016A2: RNCC: 2 | RNVC: 1

21 Aug 2003

5340-27-020-7513
Mounting Bracket

270207513
10131MD0056: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-032-6406
Mounting Bracket

270326406
T008-G1100-200: RNCC: 2 | RNVC: 1

28 Aug 2006

5340-27-059-7646
Mending Plate

270597646
6040-0039-8008: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-037-6913
Expansion Plug

270376913
69376-L4000: RNCC: 5 | RNVC: 9

21 Aug 2007

5340-27-038-8564
Mounting Bracket

270388564
2ABEP00286: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-055-8750
Mounting Bracket

270558750
6111.5400-2: RNCC: 2 | RNVC: 1

11 Jan 2012

5340-27-007-3991
Mounting Bracket

270073991
95AG A17496 AA: RNCC: 2 | RNVC: 1

3 Nov 1999

5340-27-049-4761
Mounting Bracket

270494761
105367: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-057-7851
Butt Hinge Leaf

270577851
1010FMA-0000882-2: RNCC: 2 | RNVC: 1

19 Oct 2012

5340-27-036-1450
Bail Handle

270361450
KULP,1/1 CONTALI KAPAK: RNCC: 2 | RNVC: 1

3 May 2007

5340-27-058-7801
Access Cover

270587801
VOE12745086: RNCC: 3 | RNVC: 2

2 Apr 2013

5340-27-013-3917
Catch Strike

270133917
7700576487: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-021-4591
Mending Plate

270214591
1010FG-0101839: RNCC: 2 | RNVC: 1
1010FG-0101841: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-1505
Loop Clamp

270051505
1010001732: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-025-6716
Webbing Strap

270256716
1010FG-1800152: RNCC: 2 | RNVC: 1

28 Mar 2005

5340-27-056-8687
Mending Plate

270568687
202613: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-049-4019
Rod End Clevis

270494019
92CT3304AA: RNCC: 2 | RNVC: 1

28 Apr 2010

5340-27-021-3733
Loop Clamp

270213733
3IML-0310: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-7774
Mounting Bracket

270287774
884-5800-989: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-019-0362
Mounting Bracket

270190362
03033800: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-4542
Butt Hinge

270054542
K5A-4027: RNCC: 3 | RNVC: 2

3 Dec 1997

5340-27-055-3432
Mounting Bracket

270553432
1692-0070: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-020-8910
Mounting Bracket

270208910
1010-1YA-0034: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-9428
Butt Hinge

270569428
CH01-01-032: RNCC: 2 | RNVC: 2

31 May 2012

5340-27-022-8225
Loop Clamp

270228225
7.08.01.01: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-053-3675
Mounting Bracket

270533675
H341150301: RNCC: 2 | RNVC: 1

25 Apr 2011

5340-27-028-7925
Mounting Bracket

270287925
884-5840-802: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-029-7213
Access Cover

270297213
T530-G3001-000: RNCC: 2 | RNVC: 1

5 May 2006

5340-27-038-1082
Mounting Bracket

270381082
044-03-005: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-028-7560
Mounting Bracket

270287560
884-5810-941: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-004-3239
Access Cover

270043239
05001YU0020: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-009-9418
Key Holder

270099418
DZKB000151: RNCC: 2 | RNVC: 1
DZKB000151: RNCC: 5 | RNVC: 9

15 Oct 2001

5340-27-037-3781
Hand Crank

270373781
1010005906: RNCC: 2 | RNVC: 1

25 Jul 2007

5340-27-005-1495
Loop Clamp

270051495
1010000755: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-022-6934
Mechanical Stop

270226934
AT570-28: RNCC: 2 | RNVC: 1

8 Apr 2004

5340-27-021-0533
Mending Plate

270210533
1010FK-0000556: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-1067
Mending Plate

270511067
101696: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-042-7337
Mortise Lock

270427337
CEKMECE KILIDI,52.5MM: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-024-3792
Mounting Bracket

270243792
1010FK-1811631: RNCC: 2 | RNVC: 1

16 Oct 2004

5340-27-011-0500
Butt Hinge

270110500
7115310536: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-033-6481
Mounting Bracket

270336481
40-205-3300: RNCC: 2 | RNVC: 1
40-205-3300: RNCC: 2 | RNVC: 1

8 Nov 2006

5340-27-049-5097
Bridge Clamp

270495097
105271-4: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-028-7603
Mounting Bracket

270287603
884-5810-951: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-055-3380
Mounting Bracket

270553380
1692-0030: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-004-5526
Loop Clamp

270045526
10091YK5039: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-021-1582
Mounting Bracket

270211582
1009.1KI.0220-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-029-0805
Flush Catch Claw

270290805
10121YT5495: RNCC: 2 | RNVC: 1

28 Feb 2006

5340-27-004-5515
Expansion Plug

270045515
10091YT5039: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-056-2936
Mounting Bracket

270562936
MM-7560-0060: RNCC: 3 | RNVC: 2

9 Mar 2012

5340-27-029-6742
Mending Plate

270296742
4GY-23118-10-00: RNCC: 5 | RNVC: 9

1 May 2006

5340-27-048-3636
Catch Strike

270483636
901-KP-219-1: RNCC: 2 | RNVC: 1

3 Feb 2010

5340-27-027-6286
Mending Plate

270276286
72B13-50297-AA: RNCC: 2 | RNVC: 1

14 Oct 2005

5340-27-012-3168
Expansion Plug

270123168
E 851102 S: RNCC: 2 | RNVC: 1

23 Jan 2002

5340-27-059-6515
Loop Clamp

270596515
901-KL-343: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-021-0540
Mending Plate

270210540
1010FG-0000798: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-0305
Mounting Bracket

270480305
SKN-18: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-028-7577
Mounting Bracket

270287577
884-5810-925: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-008-3407
Angle Bracket

270083407
6040-0517-9003: RNCC: 2 | RNVC: 1
6040-0517-9003: RNCC: 2 | RNVC: 1

20 Sep 2000

5340-27-040-7003
Mounting Bracket

270407003
1010FG-0612313: RNCC: 2 | RNVC: 1

4 Mar 2008

5340-27-020-7844
Mounting Bracket

270207844
1009.1KI.0229-11/1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-013-0499
Angle Bracket

270130499
6040-0518-4001: RNCC: 2 | RNVC: 1
6040-0518-4001: RNCC: 2 | RNVC: 1

16 Apr 2002

5340-27-018-6469
Mounting Bracket

270186469
1010FG-0608122: RNCC: 2 | RNVC: 1
1010FG-0608122: RNCC: 5 | RNVC: 9

15 Nov 2003

5340-27-043-5280
Mounting Bracket

270435280
073194R: RNCC: 2 | RNVC: 1

19 Nov 2008

5340-27-041-2820
Mending Plate

270412820
7252722: RNCC: 2 | RNVC: 1

12 May 2008

5340-27-027-6042
Mounting Bracket

270276042
71A70-58492-AA: RNCC: 2 | RNVC: 1

13 Oct 2005

5340-27-060-0492
Mending Plate

270600492
MM-7490-0515: RNCC: 2 | RNVC: 1

2 Jan 2014

5340-27-028-7756
Mounting Bracket

270287756
884-5800-979: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-048-7363
Mounting Bracket

270487363
7291-08: RNCC: 2 | RNVC: 1
7291-08: RNCC: 5 | RNVC: 9

24 Feb 2010

5340-27-053-2711
Mounting Bracket

270532711
72C04-60256-AA: RNCC: 2 | RNVC: 1

14 Apr 2011

5340-27-023-6125
Access Cover

270236125
1010FG-1801142-4: RNCC: 2 | RNVC: 1

17 Jul 2004

5340-27-048-5869
Bridge Clamp

270485869
MC329027Y: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-056-8715
Mending Plate

270568715
203662: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-055-5733
Mounting Bracket

270555733
84354396: RNCC: 3 | RNVC: 2

12 Dec 2011

5340-27-020-7580
Mending Plate

270207580
1009.1KI.0340-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-1516
Mounting Bracket

270221516
1009 1YM 0080-1: RNCC: 2 | RNVC: 1

13 Feb 2004

5340-27-051-8822
Loop Holder

270518822
218960: RNCC: 2 | RNVC: 1

3 Dec 2010

5340-27-021-3491
Mounting Bracket

270213491
1009.1KI.0330-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-1735
Retaining Clip

270071735
E 865451 S100: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-058-8806
Angle Bracket

270588806
VOE12745739: RNCC: 3 | RNVC: 2

24 Apr 2013

5340-27-058-9202
Mounting Bracket

270589202
VOE12730048: RNCC: 3 | RNVC: 2

30 Apr 2013

5340-27-058-8720
Access Cover

270588720
VOE12745300: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-27-051-1339
Access Cover

270511339
44132: RNCC: 3 | RNVC: 2
44132: RNCC: 5 | RNVC: 9

5 Oct 2010

5340-27-055-3419
Mounting Bracket

270553419
1692-0207: RNCC: 3 | RNVC: 2

30 Nov 2011

Load More Results