What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 21 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 21 of 53

5340-27-041-4151
Utility Access Door

270414151
146X141 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-035-7984
Sliding Door Track

270357984
51769067: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-056-8670
Mending Plate

270568670
202266: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-046-6782
Extension Handle

270466782
Y255-71004-000: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-017-3636
Mending Plate

270173636
1009.1IS.0068-B/1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-036-2368
Sliding Door Track

270362368
3C46E513A31AD: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-011-2439
Butt Hinge

270112439
07002YM0301: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-038-7393
Plug Button

270387393
10091YP0982: RNCC: 2 | RNVC: 1

30 Oct 2007

5340-27-049-0362
Mounting Bracket

270490362
32035: RNCC: 2 | RNVC: 1

26 Mar 2010

5340-27-019-9504
Loop Clamp

270199504
Q521100068: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-056-4625
Mending Plate

270564625
109829: RNCC: 2 | RNVC: 2

2 Apr 2012

5340-27-012-9455
Access Cover

270129455
98012578: RNCC: 2 | RNVC: 1

3 Apr 2002

5340-27-005-1725
Access Cover

270051725
1010000625: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-047-9250
Mounting Bracket

270479250
13C25-06765-AA: RNCC: 2 | RNVC: 1

23 Dec 2009

5340-27-020-7827
Mounting Bracket

270207827
1009.1KI.0264-1*2-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-004-5145
Access Cover

270045145
10121YK5209: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-001-7702
Loop Clamp

270017702
TM55-2840-229-2801658: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-006-9011
Mounting Bracket

270069011
A 436 671 00 27: RNCC: 2 | RNVC: 1

22 Jun 1999

5340-27-021-9887
Mending Plate

270219887
1009 1AD 0029/2: RNCC: 2 | RNVC: 1

20 Jan 2004

5340-27-038-8582
Mounting Bracket

270388582
2ABEP00339: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-029-7961
Expansion Shield

270297961
M8X55: RNCC: 2 | RNVC: 1

17 May 2006

5340-27-004-5132
Access Cover

270045132
10121YK5361: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-028-6185
Mounting Bracket

270286185
MM-7450-0096-KNM60: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-008-2455
Mounting Bracket

270082455
98005962: RNCC: 2 | RNVC: 1

24 Aug 2000

5340-27-009-9217
Access Cover

270099217
98012332: RNCC: 2 | RNVC: 1

10 Oct 2001

5340-27-035-7983
Sliding Door Track

270357983
51769063: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-017-9147
Bow Handle

270179147
894108264201: RNCC: 2 | RNVC: 1

7 Oct 2003

5340-27-052-5544
Bow Handle

270525544
73 94 100 13R: RNCC: 2 | RNVC: 2

7 Feb 2011

5340-27-051-1075
Mending Plate

270511075
103509: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-054-0212
Access Cover

270540212
H234104402: RNCC: 2 | RNVC: 1

15 Jul 2011

5340-27-032-2100
Mounting Bracket

270322100
5GJ-25827-00-00: RNCC: 2 | RNVC: 1

8 Jun 2006

5340-27-028-2276
Angle Bracket

270282276
205-076-118-1: RNCC: 2 | RNVC: 1

14 Dec 2005

5340-27-043-0016
Mounting Bracket

270430016
40.626.0159: RNCC: 2 | RNVC: 1
40.626.0159: RNCC: 2 | RNVC: 1

24 Sep 2008

5340-27-057-9464
Hook Handle

270579464
02.055.4050: RNCC: 2 | RNVC: 1

21 Nov 2012

5340-27-028-6171
Mounting Bracket

270286171
MM-7450-0096-KNM9: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-056-8876
Bridge Clamp

270568876
2.HIBM-T07/14-8: RNCC: 2 | RNVC: 1

24 May 2012

5340-27-005-1493
Loop Clamp

270051493
1010000672: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-059-4536
Access Cover

270594536
VOE20875082: RNCC: 3 | RNVC: 2

12 Aug 2013

5340-27-050-3860
Mending Plate

270503860
105234: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-054-3657
Mending Plate

270543657
98021604: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-058-2117
Mounting Bracket

270582117
16026-ZY3-000: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-007-3516
Retaining Clip

270073516
W 703130 S305: RNCC: 2 | RNVC: 1

24 Oct 1999

5340-27-050-0717
Mending Plate

270500717
107205: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-018-6251
Access Cover

270186251
1010FG-0000105: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-015-0443
Loop Clamp

270150443
8338503: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-041-3632
Utility Access Door

270413632
77X197 CM AL: RNCC: 2 | RNVC: 1

15 May 2008

5340-27-038-2232
Mounting Bracket

270382232
3584080: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-058-7607
Mounting Bracket

270587607
55RS752626: RNCC: 2 | RNVC: 1

28 Mar 2013

5340-27-020-2117
Mounting Bracket

270202117
27499: RNCC: 2 | RNVC: 1

17 Nov 2003

5340-27-004-3263
Control Rod

270043263
05001YK0150: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-051-0072
Access Cover

270510072
682-82119-01: RNCC: 3 | RNVC: 2
682-82119-01: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-27-050-5109
Bridge Clamp

270505109
DIN3016-1-D1-34-15-W3-CR: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-055-2172
Mounting Bracket

270552172
1692-0048: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-059-5612
Angle Bracket

270595612
901-DS-145: RNCC: 2 | RNVC: 1

6 Sep 2013

5340-27-050-0575
Mending Plate

270500575
102837: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-019-1250
Handle Grip

270191250
8Y7-2474A-00: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-059-0600
Expansion Plug

270590600
01182808: RNCC: 2 | RNVC: 1

21 May 2013

5340-27-051-1672
Bow Handle

270511672
13F10-72310-AA: RNCC: 2 | RNVC: 1

8 Oct 2010

5340-27-050-3889
Mending Plate

270503889
108484: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-051-4125
Mending Plate

270514125
108033: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-058-8217
Blank Panel

270588217
VOE12745415: RNCC: 3 | RNVC: 2
VOE12745415: RNCC: 3 | RNVC: 2

9 Apr 2013

5340-27-029-4069
Mending Plate

270294069
KY16042BA: RNCC: 5 | RNVC: 9

27 Mar 2006

5340-27-009-1038
Mounting Bracket

270091038
98000557-8: RNCC: 2 | RNVC: 1

1 May 2001

5340-27-028-2302
Loop Clamp

270282302
NAS1712D11-27N: RNCC: 2 | RNVC: 1

14 Dec 2005

5340-27-049-7124
Mending Plate

270497124
73B00-57164-AA: RNCC: 2 | RNVC: 1

24 May 2010

5340-27-016-4938
Mortise Lock Set

270164938
05001HK0328: RNCC: 2 | RNVC: 1

28 Jan 2003

5340-27-025-6814
Mending Plate

270256814
A90A5-20501: RNCC: 2 | RNVC: 1

29 Mar 2005

5340-27-055-5542
Handle Grip

270555542
502-00-U0-1200: RNCC: 2 | RNVC: 1

12 Dec 2011

5340-27-015-0484
Angle Bracket

270150484
1010FK-1811458-2: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-040-5299
Angle Bracket

270405299
130-1-280: RNCC: 2 | RNVC: 1

28 Jan 2008

5340-27-056-7071
Mounting Bracket

270567071
ADOP-SHELTER-180-KMOK: RNCC: 2 | RNVC: 2

30 Apr 2012

5340-27-051-5614
Mending Plate

270515614
109077: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-27-016-5550
Catch Strike

270165550
8B70528: RNCC: 2 | RNVC: 1

4 Feb 2003

5340-27-056-8656
Mending Plate

270568656
203398: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-018-2477
Catch Strike

270182477
27536: RNCC: 2 | RNVC: 1

12 Nov 2003

5340-27-021-5142
Mortise Lock Set

270215142
13001YV0105: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-6819
Loop Clamp

270596819
901-KL-357: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-057-3754
Swivel Caster

270573754
75X103 MM: RNCC: 5 | RNVC: 9

26 Jul 2012

5340-27-023-4704
Lock Bolt

270234704
1934071300: RNCC: 2 | RNVC: 1
4.04.03.01: RNCC: 2 | RNVC: 1

2 Jul 2004

5340-27-052-1990
Mounting Bracket

270521990
8.216.756.000.0: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-27-026-2767
Mounting Bracket

270262767
1010FK-2808701: RNCC: 2 | RNVC: 1

24 Jun 2005

5340-27-052-1784
Beam Gripping Clamp

270521784
TYPE422: RNCC: 2 | RNVC: 1

23 Dec 2010

5340-27-022-2612
Mounting Bracket

270222612
10009 1YS 0100: RNCC: 2 | RNVC: 1

20 Feb 2004

5340-27-009-2899
Bridge Clamp

270092899
81.43718.0037: RNCC: 2 | RNVC: 1

7 Jun 2000

5340-27-017-3651
Mending Plate

270173651
1009.1IS.0075: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-023-4511
Access Cover

270234511
1010FK-1805540: RNCC: 2 | RNVC: 1

1 Jul 2004

5340-27-017-5364
Mounting Bracket

270175364
P0629871: RNCC: 2 | RNVC: 1

11 Jul 2003

5340-27-058-5579
Leakproof Seal Plug

270585579
37507-00701: RNCC: 5 | RNVC: 9

20 Feb 2013

5340-27-021-4283
Angle Bracket

270214283
1010FG-0101842: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-6899
Access Cover

270486899
6554-08: RNCC: 2 | RNVC: 1
6554-08: RNCC: 5 | RNVC: 9

19 Feb 2010

5340-27-027-8275
Mending Plate

270278275
72A25-35420-AA: RNCC: 2 | RNVC: 1

9 Nov 2005

5340-27-054-4261
Mending Plate

270544261
98019893: RNCC: 3 | RNVC: 2

9 Sep 2011

5340-27-019-5206
Butt Hinge

270195206
07002YM0282: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-007-1700
Retaining Clip

270071700
E 860396 S101: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-005-4925
Mounting Plate

270054925
G001-32: RNCC: 3 | RNVC: 2

16 Nov 1997

5340-27-053-0668
Mending Plate

270530668
245X748 MM: RNCC: 2 | RNVC: 1

23 Mar 2011

5340-27-042-3803
Bow Handle

270423803
TUVALET KAPI KOLU: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-043-8023
Mounting Bracket

270438023
12E00-01662-AB: RNCC: 2 | RNVC: 1

16 Dec 2008

5340-27-013-4060
Loop Clamp

270134060
81.97445.0167: RNCC: 2 | RNVC: 1
30005T: RNCC: 2 | RNVC: 1
90464-25002-00: RNCC: 2 | RNVC: 1

13 Jun 2002

5340-27-042-0737
Mounting Bracket

270420737
2.HIBM-4L-592/5-9: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-059-7038
Loop Clamp

270597038
901-KL-375: RNCC: 2 | RNVC: 1

2 Oct 2013

5340-27-054-3114
Mending Plate

270543114
98022459: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-043-2933
Mounting Bracket

270432933
74A05-60497-AA: RNCC: 2 | RNVC: 1

24 Oct 2008

5340-27-038-2176
Access Cover

270382176
3583641: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-023-1191
Mounting Bracket

270231191
2ABM 1MK 0037: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-023-1222
Mounting Bracket

270231222
2ABM 1MK 0022: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-023-1896
Mounting Bracket

270231896
2ABMK 00256: RNCC: 2 | RNVC: 1

4 Jun 2004

5340-27-029-1880
Mounting Bracket

270291880
4363300174: RNCC: 2 | RNVC: 1

8 Mar 2006

5340-27-027-9648
Mounting Bracket

270279648
1010FK-3506308: RNCC: 2 | RNVC: 1
1010FK-3506308: RNCC: 5 | RNVC: 9

21 Nov 2005

5340-27-057-2142
Butt Hinge

270572142
953500-2867: RNCC: 2 | RNVC: 1

4 Jul 2012

5340-27-055-2184
Mounting Bracket

270552184
1692-0156: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-013-6709
Escutcheon Plate

270136709
KUMRU 2048.O: RNCC: 2 | RNVC: 1
ODA-38X232-DOG.OK-R.S.: RNCC: 2 | RNVC: 1
AYNA,232MM: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-27-014-2292
Mounting Bracket

270142292
941227601051: RNCC: 2 | RNVC: 1
897047149051: RNCC: 2 | RNVC: 1

2 Oct 2002

5340-27-017-0180
Rod End Clevis

270170180
10131YM0208: RNCC: 2 | RNVC: 1

30 Apr 2003

5340-27-059-7681
Mounting Bracket

270597681
7500-0000-0001: RNCC: 2 | RNVC: 1

31 Oct 2013

5340-27-017-7124
Angle Bracket

270177124
H-39-3502-01: RNCC: 2 | RNVC: 1

21 Aug 2003

5340-27-057-9920
Mounting Bracket

270579920
50301-ZY3-020ZB: RNCC: 2 | RNVC: 1

27 Nov 2012

5340-27-021-1932
Mending Plate

270211932
1010FG-0000324: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-038-9837
Angle Bracket

270389837
901-ST-170: RNCC: 2 | RNVC: 1

7 Nov 2007

5340-27-023-2443
Mounting Bracket

270232443
822808: RNCC: 2 | RNVC: 1

10 Jun 2004

5340-27-000-4214
Buckle

270004214
S-27J: RNCC: 3 | RNVC: 2

5 May 1977

5340-27-055-0301
Mounting Bracket

270550301
6111.5200-4: RNCC: 2 | RNVC: 1

31 Oct 2011

5340-27-022-9471
Loop Clamp

270229471
05001FK0105: RNCC: 2 | RNVC: 1

7 May 2004

5340-27-038-7181
Mounting Bracket

270387181
10091YK0976: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-056-2247
Mending Plate

270562247
37949845800: RNCC: 2 | RNVC: 2

1 Mar 2012

5340-27-013-2183
Bridge Clamp

270132183
5340-77777-00006: RNCC: 2 | RNVC: 1
Q100 PVC P.S.K: RNCC: 2 | RNVC: 1
KELEPCE PVC, 100: RNCC: 2 | RNVC: 1
KELEPCE PVC, 100: RNCC: 2 | RNVC: 1
04039100: RNCC: 2 | RNVC: 1
100 MM: RNCC: 5 | RNVC: 9

16 May 2002

5340-27-027-8471
Bow Handle

270278471
73B00-57135-AA: RNCC: 2 | RNVC: 1

10 Nov 2005

5340-27-054-6780
Mounting Bracket

270546780
55RS752908: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-029-1252
Bow Handle

270291252
735249571: RNCC: 2 | RNVC: 1

3 Mar 2006

5340-27-006-9223
Mounting Bracket

270069223
91AB A21630 AD: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-051-4146
Mending Plate

270514146
108592: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-037-5361
Bow Handle

270375361
735303641: RNCC: 2 | RNVC: 1

3 Aug 2007

5340-27-036-3887
Expansion Plug

270363887
3588502: RNCC: 2 | RNVC: 1

30 May 2007

5340-27-028-1775
Loop Clamp

270281775
EAB700D6: RNCC: 2 | RNVC: 1

9 Dec 2005

5340-27-034-6301
Mounting Bracket

270346301
3C462A275AA: RNCC: 2 | RNVC: 1

30 Jan 2007

5340-27-043-1329
Utility Access Door

270431329
2500X920MM,ALUMINYUM: RNCC: 2 | RNVC: 1

15 Oct 2008

5340-27-006-9236
Mounting Bracket

270069236
92AG A60100 AA: RNCC: 2 | RNVC: 1

28 Jun 1999

5340-27-053-8273
Utility Access Door

270538273
C173-130001: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-27-012-7022
Loop Clamp

270127022
90464-18002-00: RNCC: 2 | RNVC: 1
6A79476: RNCC: 2 | RNVC: 1

6 Mar 2002

5340-27-040-2553
Mending Plate

270402553
7703602206: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-018-7137
Access Cover

270187137
1010FK-3506156: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-032-3376
Handle Grip

270323376
TV-MOD.2.150: RNCC: 2 | RNVC: 1

22 Jun 2006

5340-27-036-2748
Mounting Bracket

270362748
1B15002: RNCC: 2 | RNVC: 1

21 May 2007

5340-27-018-7381
Synchro Clamp

270187381
11669087-4: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-055-1278
Catch Strike

270551278
00228 00 904: RNCC: 2 | RNVC: 1
H346105202: RNCC: 2 | RNVC: 1

14 Nov 2011

5340-27-041-1693
Utility Access Door

270411693
100X205CM KAPI,ALUMINYUM: RNCC: 2 | RNVC: 1

6 May 2008

5340-27-050-0680
Mending Plate

270500680
103532: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-035-9566
Ball Socket Seat

270359566
20441753: RNCC: 2 | RNVC: 1

12 Apr 2007

5340-27-054-6611
Mounting Bracket

270546611
55RS752818: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-013-3918
Catch Strike

270133918
7702128495: RNCC: 2 | RNVC: 1
7702128495: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-050-1583
Bridge Clamp

270501583
103094: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-012-1526
Mending Plate

270121526
10131YS0919: RNCC: 2 | RNVC: 1

16 Jan 2002

5340-27-024-5141
Mending Plate

270245141
21431-27500: RNCC: 2 | RNVC: 1

6 Nov 2004

5340-27-009-6885
Mounting Bracket

270096885
7927 23: RNCC: 2 | RNVC: 1

16 Aug 2001

5340-27-036-0413
Mounting Bracket

270360413
1.HIBM-1I-2568: RNCC: 2 | RNVC: 1

20 Apr 2007

5340-27-036-7199
Mounting Bracket

270367199
MM-7560-0211: RNCC: 2 | RNVC: 1

20 Jun 2007

5340-27-018-2436
Mounting Bracket

270182436
98012773: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-048-9627
Mending Plate

270489627
103656: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-055-6966
Mounting Bracket

270556966
4966243: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-048-5502
Stand Base

270485502
86555A-00: RNCC: 2 | RNVC: 1

15 Feb 2010

5340-27-049-8524
Tee Hinge

270498524
107489: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-053-5672
Butt Hinge

270535672
303538: RNCC: 2 | RNVC: 1

20 May 2011

5340-27-033-6440
Mounting Bracket

270336440
JAM1595: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-059-7653
Mounting Bracket

270597653
9999-0000-0351: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-026-9513
Mounting Bracket

270269513
65521: RNCC: 2 | RNVC: 1

12 Aug 2005

5340-27-056-8718
Mending Plate

270568718
201200: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-048-9646
Mending Plate

270489646
103680: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-059-0711
Loop Clamp

270590711
02931779: RNCC: 2 | RNVC: 1

22 May 2013

5340-27-033-6702
Bow Handle

270336702
MUC1478: RNCC: 2 | RNVC: 1

10 Nov 2006

5340-27-017-2222
Access Cover

270172222
ME-01-0032-50: RNCC: 2 | RNVC: 1

29 May 2003

5340-27-053-0017
Sliding Door Track

270530017
2T14 V25005BG: RNCC: 2 | RNVC: 1

15 Mar 2011

5340-27-012-3834
Expansion Plug

270123834
E 857108 S: RNCC: 2 | RNVC: 1

29 Jan 2002

5340-27-023-3504
Filler Opening Cap

270233504
05001FK0147: RNCC: 2 | RNVC: 1

23 Jun 2004

5340-27-040-7314
Mounting Bracket

270407314
1.HIBM-1I-2714: RNCC: 2 | RNVC: 1

11 Mar 2008

5340-27-054-7807
Mending Plate

270547807
203231: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-039-3858
Flush Catch

270393858
KILIT EKS: RNCC: 2 | RNVC: 1

29 Nov 2007

5340-27-038-2236
Mounting Bracket

270382236
3584044: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-038-8585
Mounting Bracket

270388585
2ABEP00355: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-048-2557
Utility Access Door

270482557
269.01.02: RNCC: 2 | RNVC: 1

21 Jan 2010

5340-27-005-1592
Lock Bolt

270051592
1010001531: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-017-3868
Mounting Bracket

270173868
1009.1IS.0058-10: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-001-7896
Control Rod

270017896
TM55-1520-204-347-631-122: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-051-4094
Mending Plate

270514094
105797: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-023-0094
Mounting Bracket

270230094
1009 1MK 0003: RNCC: 2 | RNVC: 1

12 May 2004

5340-27-021-8776
Mounting Bracket

270218776
KMS 0008-1: RNCC: 2 | RNVC: 1

8 Jan 2004

5340-27-023-8709
Coat And Hat Hook

270238709
M.ASKI-2: RNCC: 2 | RNVC: 1

12 Aug 2004

5340-27-013-0982
Mending Plate

270130982
81.97486.0392: RNCC: 2 | RNVC: 1

25 Apr 2002

5340-27-040-4649
Mounting Bracket

270404649
2854338-2: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-037-0515
Mounting Bracket

270370515
L-137: RNCC: 2 | RNVC: 1

12 Jul 2007

5340-27-056-8889
Mending Plate

270568889
800-26-00-00: RNCC: 2 | RNVC: 1

24 May 2012

5340-27-004-7916
Access Cover

270047916
10091YK5087: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-027-0853
Loop Clamp

270270853
MB882374: RNCC: 2 | RNVC: 1

1 Sep 2005

5340-27-006-8747
Access Cover

270068747
10131YK0188: RNCC: 2 | RNVC: 1

4 Jun 1999

5340-27-015-0453
Loop Clamp

270150453
10900815: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-055-7975
Support Hook

270557975
AK901031200T: RNCC: 2 | RNVC: 2

5 Jan 2012

5340-27-021-4077
Mounting Bracket

270214077
1009.1KI.0161-4*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-015-0362
Loop Clamp

270150362
7260493: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-059-1048
Lock-Release Lever

270591048
KOL KAPAK KILIT: RNCC: 2 | RNVC: 1

27 May 2013

5340-27-021-9690
Mounting Bracket

270219690
1009 1AD 0009/1-3: RNCC: 2 | RNVC: 1

16 Jan 2004

5340-27-010-1112
T Bracket

270101112
98000352: RNCC: 2 | RNVC: 1

5 Nov 2001

5340-27-017-3707
Pad Eye

270173707
1009.1IS.0096-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-012-1958
Expansion Plug

270121958
E 866241 SSW: RNCC: 2 | RNVC: 1

17 Jan 2002

5340-27-049-8366
Rod End Connector

270498366
7335793699: RNCC: 2 | RNVC: 1
71-8: RNCC: 2 | RNVC: 1

4 Jun 2010

5340-27-040-9141
Flush Lock

270409141
2-006-0004: RNCC: 2 | RNVC: 1
4-007-005: RNCC: 2 | RNVC: 1

9 Apr 2008

5340-27-040-4513
Mounting Bracket

270404513
11610624: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-015-6778
Mounting Bracket

270156778
05001FA0023: RNCC: 2 | RNVC: 1
1P9945: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-056-8675
Mending Plate

270568675
202282: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-051-3178
Loop Clamp

270513178
16F36-16622-AA: RNCC: 2 | RNVC: 1

14 Oct 2010

5340-27-011-7967
Barrel Bolt

270117967
7230920-01: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-012-5552
Mounting Bracket

270125552
10131YS0817: RNCC: 2 | RNVC: 1

11 Feb 2002

5340-27-032-7918
Mounting Bracket

270327918
83A11-75058-AA: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-056-2919
Flush Catch

270562919
MD-00000879: RNCC: 3 | RNVC: 2

9 Mar 2012

5340-27-051-7675
Mounting Bracket

270517675
10091YT7004: RNCC: 2 | RNVC: 1

26 Nov 2010

5340-27-023-3351
Mounting Bracket

270233351
54RS850027: RNCC: 2 | RNVC: 1

22 Jun 2004

5340-27-041-9997
Coat And Hat Hook

270419997
BEYAZ PLS-ELBISE ASKI: RNCC: 2 | RNVC: 1

8 Jul 2008

5340-27-048-9655
Mending Plate

270489655
103696: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-009-6109
Mounting Bracket

270096109
4158805: RNCC: 2 | RNVC: 1

3 Aug 2001

5340-27-059-7039
Loop Clamp

270597039
901-KL-376: RNCC: 2 | RNVC: 1

2 Oct 2013

5340-27-022-0421
Loop Holder

270220421
52146: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-026-0412
Rod Retainer Clip

270260412
897102415051: RNCC: 2 | RNVC: 1

25 May 2005

5340-27-029-5877
Mending Plate

270295877
MM-7450-0096-KNM66: RNCC: 2 | RNVC: 1

17 Apr 2006

5340-27-043-6432
Mending Plate

270436432
YS 01 03 03: RNCC: 3 | RNVC: 2

27 Nov 2008

5340-27-017-3703
Pad Eye

270173703
1009.1IS.0073-18: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-050-9908
Loop Clamp

270509908
90464-05M16: RNCC: 3 | RNVC: 2
90464-05M16: RNCC: 3 | RNVC: 2

22 Sep 2010

5340-27-021-1037
Access Cover

270211037
1010FK-3517910: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-6277
Mounting Bracket

270586277
1010FMA-1401955: RNCC: 2 | RNVC: 1

28 Feb 2013

5340-27-051-7663
Mending Plate

270517663
16F10-56142-AA: RNCC: 2 | RNVC: 1

25 Nov 2010

5340-27-057-2745
Bridge Clamp

270572745
KI008114: RNCC: 2 | RNVC: 1

11 Jul 2012

5340-27-019-5926
Mounting Bracket

270195926
07001YS0080: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-024-8087
Butt Hinge Leaf

270248087
1010FG-1802376-2: RNCC: 2 | RNVC: 1

7 Dec 2004

5340-27-054-6084
Mounting Bracket

270546084
98016952: RNCC: 2 | RNVC: 2

30 Sep 2011

5340-27-050-3866
Mending Plate

270503866
105325: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-005-1715
Access Cover

270051715
1010001927: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-041-8394
Mending Plate

270418394
0008: RNCC: 2 | RNVC: 1
0008: RNCC: 2 | RNVC: 1

23 Jun 2008

5340-27-036-0492
Mending Plate

270360492
46802028: RNCC: 2 | RNVC: 1

24 Apr 2007

5340-27-036-0393
Mending Plate

270360393
13C02-67193-AA: RNCC: 2 | RNVC: 1

20 Apr 2007

5340-27-021-2130
Mounting Bracket

270212130
1012.1HSCA.02-70: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-9511
Mounting Bracket

270579511
34754-ZY3-C00: RNCC: 2 | RNVC: 1

21 Nov 2012

5340-27-033-6343
Angle Bracket

270336343
901-AS-354: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-018-8953
Mounting Bracket

270188953
11051YK0033: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-059-7805
Mending Plate

270597805
12313449: RNCC: 2 | RNVC: 1

4 Nov 2013

5340-27-018-6688
Mounting Bracket

270186688
1010FK-2702582: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-017-9364
Screw Hook

270179364
PITON VIDA: RNCC: 2 | RNVC: 1

20 Oct 2003

5340-27-054-2608
Catch Strike

270542608
KARSILIK,ALT: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-051-1071
Mending Plate

270511071
102863: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-015-6706
Rod End Clevis

270156706
05001FC0004: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-048-9667
Mending Plate

270489667
103710: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-022-9085
Mounting Bracket

270229085
3.03.06.04: RNCC: 2 | RNVC: 1

4 May 2004

5340-27-023-2934
Corner Brace

270232934
4.03.06.11: RNCC: 2 | RNVC: 1
1934062309: RNCC: 2 | RNVC: 1

16 Jun 2004

5340-27-036-0136
Angle Bracket

270360136
10025924: RNCC: 2 | RNVC: 1

18 Apr 2007

5340-27-005-3871
Synchro Clamp

270053871
1.HIBM-1I-1587-2: RNCC: 3 | RNVC: 2

16 Jul 1997

5340-27-015-8180
Butt Hinge

270158180
5340-TJ1-00830: RNCC: 2 | RNVC: 1

16 Dec 2002

5340-27-054-0425
Bridge Clamp

270540425
98018322: RNCC: 3 | RNVC: 2

19 Jul 2011

5340-27-012-4363
Expansion Plug

270124363
74200 GS2: RNCC: 2 | RNVC: 1

31 Jan 2002

5340-27-048-9234
Angle Bracket

270489234
10029354: RNCC: 2 | RNVC: 1

18 Mar 2010

5340-27-025-9921
Mounting Bracket

270259921
1604396481: RNCC: 2 | RNVC: 1

17 May 2005

5340-27-036-1262
Loop Clamp

270361262
91CT6K779BA: RNCC: 2 | RNVC: 1

1 May 2007

5340-27-020-7576
Mounting Bracket

270207576
1009.1KI.0079-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-039-2788
Loop Holder

270392788
3587699: RNCC: 2 | RNVC: 1

22 Nov 2007

5340-27-017-2232
Angle Bracket

270172232
ME-01-0060-50: RNCC: 2 | RNVC: 1

29 May 2003

5340-27-024-5443
Mounting Bracket

270245443
1009 1YS 0023: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-006-9231
Mounting Bracket

270069231
91AG A24387 AC: RNCC: 2 | RNVC: 1

20 Dec 2001

5340-27-049-7069
Loop Clamp

270497069
TK-04-0000109: RNCC: 2 | RNVC: 1

21 May 2010

5340-27-033-8280
Catch Strike

270338280
73B00-57382-AA: RNCC: 2 | RNVC: 1

20 Nov 2006

5340-27-027-5874
Bow Handle

270275874
20X200: RNCC: 5 | RNVC: 9

12 Oct 2005

5340-27-051-4143
Mending Plate

270514143
108590: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-021-8779
Mounting Bracket

270218779
KMS 0007: RNCC: 2 | RNVC: 1

8 Jan 2004

5340-27-000-1928
Access Cover

270001928
16-212-026: RNCC: 3 | RNVC: 2

5 May 1977

5340-27-022-0602
Mounting Bracket

270220602
9120 56: RNCC: 2 | RNVC: 1

29 Jan 2004

5340-27-054-6719
Mounting Bracket

270546719
55RS360146: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-025-3310
Angle Bracket

270253310
101D4793: RNCC: 2 | RNVC: 1

24 Feb 2005

5340-27-049-6239
Bridge Clamp

270496239
1010FG-0302065: RNCC: 2 | RNVC: 1

13 May 2010

5340-27-035-9679
Plug Button

270359679
735421163: RNCC: 2 | RNVC: 1

13 Apr 2007

5340-27-059-5591
Angle Bracket

270595591
901-DS-126: RNCC: 2 | RNVC: 1

5 Sep 2013

5340-27-019-2199
Loop Clamp

270192199
90464-07M56-00: RNCC: 2 | RNVC: 1
10361543: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-4823
Flush Catch

270214823
TR-0108A: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-3000
Mending Plate

270583000
0421 4346: RNCC: 2 | RNVC: 1

7 Jan 2013

5340-27-011-9926
Handle Grip

270119926
58RS501144: RNCC: 2 | RNVC: 1

26 Dec 2001

5340-27-015-0406
Loop Clamp

270150406
7703692: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-041-4040
Utility Access Door

270414040
86X188 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-032-7725
Webbing Strap

270327725
30X1 MM: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-056-8650
Mending Plate

270568650
98001162-1: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-050-1552
Mending Plate

270501552
103580: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-017-3834
Lever Bracket

270173834
1009.1IS.0071-D4: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-052-7508
Mounting Bracket

270527508
151 033 03: RNCC: 2 | RNVC: 1

21 Feb 2011

5340-27-046-8200
Mending Plate

270468200
16140346: RNCC: 3 | RNVC: 2

12 Oct 2009

5340-27-013-6981
Access Cover

270136981
98012861: RNCC: 2 | RNVC: 1

15 Jul 2002

5340-27-057-5133
Bow Handle

270575133
55RS860394: RNCC: 2 | RNVC: 1

23 Aug 2012

5340-27-048-6516
Mounting Bracket

270486516
SK250011: RNCC: 2 | RNVC: 1

18 Feb 2010

5340-27-028-7851
Loop Clamp

270287851
72A22-16817-AA: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-050-8685
Mounting Bracket

270508685
6H4-48532-11-94: RNCC: 3 | RNVC: 2
6H4-48532-11-94: RNCC: 3 | RNVC: 2

6 Sep 2010

5340-27-037-0324
Mounting Bracket

270370324
C70G53: RNCC: 2 | RNVC: 1

11 Jul 2007

5340-27-021-4057
Mounting Bracket

270214057
1009.1KI.01647*2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-3948
Mounting Bracket

270533948
H342408700: RNCC: 2 | RNVC: 1

28 Apr 2011

5340-27-059-7040
Loop Clamp

270597040
901-KL-377: RNCC: 2 | RNVC: 1

2 Oct 2013

5340-27-001-7315
Loop Clamp

270017315
TM55-1520-210-2MS21919WDG-11: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-037-4548
Loop Clamp

270374548
9205207: RNCC: 2 | RNVC: 1

31 Jul 2007

5340-27-019-1345
Loop Clamp

270191345
83974400031: RNCC: 2 | RNVC: 1
90464-13249-00: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-6653
Mounting Bracket

270546653
55RS752980: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-034-0716
Mounting Bracket

270340716
13C00-58312-AA: RNCC: 2 | RNVC: 1

8 Dec 2006

5340-27-059-0815
Access Cover

270590815
VOE20450799: RNCC: 3 | RNVC: 2
VOE20450799: RNCC: 3 | RNVC: 2

22 May 2013

5340-27-045-6167
Bridge Clamp

270456167
7700797730: RNCC: 2 | RNVC: 1
7700797730: RNCC: 2 | RNVC: 1

20 May 2009

5340-27-009-9367
Mounting Bracket

270099367
98012362: RNCC: 2 | RNVC: 1

12 Oct 2001

5340-27-044-5000
Flush Catch

270445000
9BM 5340-00663: RNCC: 2 | RNVC: 1

11 Feb 2009

5340-27-043-1222
Angle Bracket

270431222
TMS-P304-03: RNCC: 3 | RNVC: 2

14 Oct 2008

5340-27-005-4544
Butt Hinge

270054544
K5A-4028: RNCC: 3 | RNVC: 2

3 Dec 1997

5340-27-020-9501
Mending Plate

270209501
1010FG-0000726: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-018-6783
Mounting Bracket

270186783
1010FK-0604442: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-9622
Mending Plate

270489622
103651: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-038-4778
Bow Handle

270384778
40-270-4020: RNCC: 2 | RNVC: 1
40-270-4020: RNCC: 2 | RNVC: 1

9 Oct 2007

5340-27-032-3417
Bridge Clamp

270323417
40-251-0022: RNCC: 2 | RNVC: 1
40-251-0022: RNCC: 2 | RNVC: 1

23 Jun 2006

5340-27-032-7920
Mending Plate

270327920
83A12-59933-AA: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-051-4105
Mending Plate

270514105
105916: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-018-6399
Mounting Bracket

270186399
1010FG-0312919: RNCC: 2 | RNVC: 1
HSN06-012: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-057-8020
Bridge Clamp

270578020
1010FMA-1202703: RNCC: 2 | RNVC: 1

23 Oct 2012

5340-27-056-2937
Mounting Bracket

270562937
MM-7560-0107: RNCC: 2 | RNVC: 2

9 Mar 2012

5340-27-049-7257
Angle Bracket

270497257
MCT1222212-003: RNCC: 2 | RNVC: 1

24 May 2010

5340-27-033-6383
Bow Handle

270336383
40-205-3385: RNCC: 2 | RNVC: 1
40-205-3385: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-048-0294
Mounting Bracket

270480294
SKN-11: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-047-0261
Mending Plate

270470261
73A04-57487-AA: RNCC: 2 | RNVC: 1

27 Oct 2009

5340-27-021-1299
Mending Plate

270211299
1010FG-0000463: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-008-0513
Flush Catch

270080513
1461310300: RNCC: 2 | RNVC: 1
6369: RNCC: 2 | RNVC: 1

12 Jun 2000

5340-27-023-3178
Flush Catch

270233178
1924080410: RNCC: 2 | RNVC: 1
4.05.13.16: RNCC: 2 | RNVC: 1

18 Jun 2004

5340-27-043-0230
Mounting Bracket

270430230
40.780.4001: RNCC: 2 | RNVC: 1
40.780.4001: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-043-5489
Mending Plate

270435489
FRMG-01: RNCC: 2 | RNVC: 1

20 Nov 2008

5340-27-044-5440
Catch Strike

270445440
81.62690-0054: RNCC: 2 | RNVC: 1

16 Feb 2009

5340-27-055-3232
Mounting Bracket

270553232
1692-0056: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-27-029-1343
Mounting Bracket

270291343
M52T3011R467000: RNCC: 2 | RNVC: 1

3 Mar 2006

5340-27-021-4305
Mounting Bracket

270214305
1012.1HSCA.03-27: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-045-7690
Mending Plate

270457690
10029211: RNCC: 2 | RNVC: 1

11 Jun 2009

5340-27-015-0414
Loop Clamp

270150414
7724763: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-042-0783
Catch Strike

270420783
13725: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-054-6670
Mounting Bracket

270546670
55RS560231: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-054-3905
Mounting Bracket

270543905
55RS650834: RNCC: 2 | RNVC: 1

5 Sep 2011

5340-27-022-0843
Bail Handle

270220843
G51436: RNCC: 2 | RNVC: 1

6 Feb 2004

5340-27-059-6603
Loop Clamp

270596603
901-KL-382: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-001-2949
Loop Clamp

270012949
205-030-379-020: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-044-5625
Mounting Bracket

270445625
Y532-65500-202: RNCC: 2 | RNVC: 1

17 Feb 2009

5340-27-016-6396
Mounting Bracket

270166396
98013175: RNCC: 2 | RNVC: 1

20 Feb 2003

5340-27-015-7221
Flush Lock

270157221
10091KI0235: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-051-7849
Mounting Bracket

270517849
020/20165: RNCC: 2 | RNVC: 1

29 Nov 2010

5340-27-051-7258
Mending Plate

270517258
16F10-56172-AA: RNCC: 2 | RNVC: 1

23 Nov 2010

5340-27-054-1742
Mending Plate

270541742
98019516: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-024-5642
Butt Hinge

270245642
50 MM: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-042-5686
Mending Plate

270425686
54555529: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-051-4082
Mending Plate

270514082
102055: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-049-9669
Mending Plate

270499669
HD204283: RNCC: 2 | RNVC: 2
HD204283: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-037-5957
Utility Access Door

270375957
90X210 CM: RNCC: 5 | RNVC: 9

8 Aug 2007

5340-27-055-9111
Mounting Bracket

270559111
102165: RNCC: 2 | RNVC: 2

13 Jan 2012

5340-27-008-3160
Rod Retainer Clip

270083160
14202985: RNCC: 2 | RNVC: 1
7701045650: RNCC: 2 | RNVC: 1

14 Sep 2000

5340-27-008-8539
Mounting Bracket

270088539
98001459: RNCC: 2 | RNVC: 1

2 Feb 2001

5340-27-024-3082
Mounting Bracket

270243082
1010FG-F1320020: RNCC: 2 | RNVC: 1

9 Oct 2004

5340-27-049-1440
Mounting Bracket

270491440
5340KK0201551: RNCC: 2 | RNVC: 1

7 Apr 2010

5340-27-041-3002
Mending Plate

270413002
7253359: RNCC: 2 | RNVC: 1

13 May 2008

5340-27-020-9376
Mounting Bracket

270209376
1009.1KI.0002: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-027-5632
Door Closer

270275632
5100 SERISI: RNCC: 2 | RNVC: 1
5100 SERISI: RNCC: 5 | RNVC: 9

12 Oct 2005

5340-27-015-0382
Loop Clamp

270150382
7389083: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-021-4064
Mounting Bracket

270214064
10091KI0201-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-018-1831
Rod End Clevis

270181831
7.13.05.01: RNCC: 2 | RNVC: 1

6 Nov 2003

5340-27-015-0432
Loop Clamp

270150432
7978874: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-040-8627
Mending Plate

270408627
ME013560: RNCC: 2 | RNVC: 1

3 Apr 2008

5340-27-041-4023
Utility Access Door

270414023
72X196 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-038-5690
Mending Plate

270385690
MB005388: RNCC: 2 | RNVC: 1

17 Oct 2007

5340-27-054-7870
Mending Plate

270547870
201595: RNCC: 2 | RNVC: 2

14 Oct 2011

5340-27-056-8777
Mounting Bracket

270568777
203137: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-055-8743
Rod End Connector

270558743
6111.5312-5: RNCC: 2 | RNVC: 1

11 Jan 2012

5340-27-059-6498
Loop Clamp

270596498
901-KL-337: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-057-0019
Mending Plate

270570019
203592: RNCC: 2 | RNVC: 1

7 Jun 2012

5340-27-016-7186
Mounting Bracket

270167186
98012885: RNCC: 2 | RNVC: 1

4 Mar 2003

5340-27-026-8423
Mounting Bracket

270268423
1010FK-0000247-11: RNCC: 2 | RNVC: 1

4 Aug 2005

5340-27-051-7425
Mending Plate

270517425
1177109: RNCC: 3 | RNVC: 2

24 Nov 2010

5340-27-019-0360
Mounting Bracket

270190360
00734200: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-053-9701
Mending Plate

270539701
98017413: RNCC: 2 | RNVC: 2

12 Jul 2011

5340-27-027-8323
Mending Plate

270278323
72A06-73149-AA: RNCC: 2 | RNVC: 1

9 Nov 2005

5340-27-054-3643
Mending Plate

270543643
98021389: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-010-1980
Loop Clamp

270101980
DZJK000002: RNCC: 2 | RNVC: 1

14 Nov 2001

5340-27-057-5962
Mortise Lock

270575962
101: RNCC: 5 | RNVC: 9

10 Sep 2012

5340-27-051-4900
Mounting Bracket

270514900
400282-009: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-27-056-3712
Mending Plate

270563712
3834233: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-27-038-1983
Mending Plate

270381983
3599899: RNCC: 2 | RNVC: 1

20 Sep 2007

5340-27-021-6777
Mounting Bracket

270216777
1009 1YP 0081: RNCC: 2 | RNVC: 1

23 Dec 2003

5340-27-021-1075
Bail Handle

270211075
05001DK0283: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-9450
Mending Plate

270539450
98018316: RNCC: 2 | RNVC: 2

11 Jul 2011

5340-27-008-7043
Access Cover

270087043
DR-00042-00: RNCC: 2 | RNVC: 1

19 Dec 2000

5340-27-028-7574
Mounting Bracket

270287574
884-5810-923: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-058-9011
Access Cover

270589011
VOE127440999: RNCC: 3 | RNVC: 2

26 Apr 2013

5340-27-021-0747
Flush Catch

270210747
1009.1KI.0143-5*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-3411
Mounting Bracket

270533411
901-DS-90: RNCC: 2 | RNVC: 1

20 Apr 2011

5340-27-051-0355
Utility Access Door

270510355
IYAK-1050X2500: RNCC: 2 | RNVC: 1

27 Sep 2010

5340-27-021-6806
Mounting Bracket

270216806
1009 1YS 0065: RNCC: 2 | RNVC: 1

23 Dec 2003

5340-27-059-7177
Mounting Bracket

270597177
1500.08.0097: RNCC: 2 | RNVC: 1

8 Oct 2013

5340-27-005-1774
Strap Fastener Loop

270051774
1010000444: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-015-0404
Loop Clamp

270150404
7703690: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-022-5466
Expansion Shield

270225466
M10AS6: RNCC: 2 | RNVC: 1
10MM DUBEL: RNCC: 2 | RNVC: 1

20 Mar 2004

5340-27-039-3446
Mounting Bracket

270393446
F-2561-13: RNCC: 2 | RNVC: 1

27 Nov 2007

5340-27-032-5823
Mounting Bracket

270325823
40-624-0185: RNCC: 2 | RNVC: 1
40-624-0185: RNCC: 2 | RNVC: 1

11 Aug 2006

5340-27-059-6496
Loop Clamp

270596496
901-KL-335: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-055-4286
Mounting Bracket

270554286
5096885: RNCC: 2 | RNVC: 2

5 Dec 2011

5340-27-048-9632
Mending Plate

270489632
103662: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-038-9832
Mounting Bracket

270389832
11830969: RNCC: 2 | RNVC: 1

7 Nov 2007

5340-27-055-6885
Mounting Bracket

270556885
58RS103468: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-032-6946
Mounting Bracket

270326946
13C00-36692-AA: RNCC: 2 | RNVC: 1

8 Sep 2006

5340-27-001-7515
Retaining Strap

270017515
TM55-1520-210-3205-031-481-025: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-050-0481
Mending Plate

270500481
HD212150S: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-059-5478
Angle Bracket

270595478
901-DS-109: RNCC: 2 | RNVC: 1

3 Sep 2013

5340-27-037-5479
Bow Handle

270375479
7700750314: RNCC: 2 | RNVC: 1

6 Aug 2007

5340-27-001-7885
Strap End Clip

270017885
TM55-1520-210-3205-062-661-1: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-27-013-0804
Loop Clamp

270130804
54RS250558: RNCC: 2 | RNVC: 1

19 Apr 2002

5340-27-042-5681
Mending Plate

270425681
54549639: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-025-0195
Butt Hinge Leaf

270250195
1010FK-1802030: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-035-8166
Bow Handle

270358166
735417881: RNCC: 2 | RNVC: 1

30 Mar 2007

5340-27-024-0976
Clamping Catch

270240976
98010378: RNCC: 2 | RNVC: 1

16 Sep 2004

5340-27-041-4098
Utility Access Door

270414098
96X193 CM AL: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-026-8203
Access Cover

270268203
1010FG-1801306: RNCC: 2 | RNVC: 1

3 Aug 2005

5340-27-041-8520
Mounting Bracket

270418520
03031: RNCC: 2 | RNVC: 1
03031: RNCC: 2 | RNVC: 1

25 Jun 2008

5340-27-023-6780
Angle Bracket

270236780
8694131: RNCC: 2 | RNVC: 1

28 Jul 2004

5340-27-048-6487
Bow Handle

270486487
TU308102: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-27-055-6953
Access Cover

270556953
5094080: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-021-4037
Mounting Bracket

270214037
1012.1HSCA.03-10: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-034-1102
Catch Strike

270341102
2ABEP00063: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-051-0079
Rod End Connector

270510079
63D-61351-00: RNCC: 3 | RNVC: 2
63D-61351-00: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-27-056-3220
Mounting Bracket

270563220
3831951: RNCC: 3 | RNVC: 2

14 Mar 2012

5340-27-043-0945
Mounting Bracket

270430945
2ABEP00962: RNCC: 2 | RNVC: 1

10 Oct 2008

5340-27-054-7451
Mending Plate

270547451
202846: RNCC: 2 | RNVC: 2

12 Oct 2011

5340-27-018-3157
Roller Holder

270183157
10121YA5368: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-060-0420
Mounting Bracket

270600420
MM-7490-0258: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-018-4372
Rod End Clevis

270184372
31140406601: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-024-7719
Catch Strike

270247719
71B22-55510-AB: RNCC: 2 | RNVC: 1
75B22-55510-AB: RNCC: 2 | RNVC: 1

1 Dec 2004

5340-27-018-6312
Strapping Seal

270186312
1010FG-0306102: RNCC: 2 | RNVC: 1
1010FG-0306102: RNCC: 2 | RNVC: 1
EFE-6312: RNCC: 5 | RNVC: 9

15 Nov 2003

5340-27-011-4856
Access Cover

270114856
7335710748: RNCC: 2 | RNVC: 1
7335710748: RNCC: 2 | RNVC: 1
7335710748: RNCC: 5 | RNVC: 2

18 Jun 2002

5340-27-023-0740
Lock Key

270230740
150130450: RNCC: 2 | RNVC: 1

26 May 2004

5340-27-025-3604
Access Cover

270253604
1010FK-1803432: RNCC: 2 | RNVC: 1

4 Mar 2005

5340-27-057-7997
Bridge Clamp

270577997
2.HIBM-T07/24-28: RNCC: 2 | RNVC: 1

22 Oct 2012

5340-27-029-1286
Mounting Bracket

270291286
10121YS5574: RNCC: 2 | RNVC: 1

3 Mar 2006

5340-27-059-2637
Mending Plate

270592637
98017355: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-023-1172
Mounting Bracket

270231172
1010FK-0000322: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-041-4038
Utility Access Door

270414038
83X220 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-038-2170
Access Cover

270382170
3583629: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-022-7356
Mending Plate

270227356
23V2216200: RNCC: 2 | RNVC: 1

14 Apr 2004

5340-27-050-3882
Mending Plate

270503882
107394: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-057-5698
Mounting Bracket

270575698
M539F328120600: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-058-0228
Mending Plate

270580228
202689: RNCC: 2 | RNVC: 1

3 Dec 2012

5340-27-034-1186
Mounting Bracket

270341186
0000GK0136209: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-058-7558
Mounting Bracket

270587558
55RS752683: RNCC: 2 | RNVC: 1

28 Mar 2013

5340-27-038-6299
Mending Plate

270386299
83A18-36922-AA: RNCC: 2 | RNVC: 1

23 Oct 2007

5340-27-059-2711
Mounting Bracket

270592711
55RS251134: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-054-5797
Mounting Bracket

270545797
C17P33: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-057-9374
Butt Hinge

270579374
1010FMA-3505052: RNCC: 2 | RNVC: 1

19 Nov 2012

5340-27-019-6245
Flush Catch

270196245
05001HM0066: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-1003
Rim Latch

270211003
05001HM0011: RNCC: 2 | RNVC: 1
4X34X58MM: RNCC: 5 | RNVC: 9

15 Dec 2003

5340-27-044-1484
Angle Bracket

270441484
AMJP24T14: RNCC: 2 | RNVC: 1

12 Jan 2009

5340-27-027-4168
Mending Plate

270274168
81.62690.0056: RNCC: 2 | RNVC: 1

3 Oct 2005

5340-27-027-0063
Mounting Bracket

270270063
2ABMK01701: RNCC: 2 | RNVC: 1

18 Aug 2005

5340-27-022-4411
Expansion Shield

270224411
DA0056506: RNCC: 2 | RNVC: 1

10 Mar 2004

5340-27-022-8062
Mounting Bracket

270228062
9061681: RNCC: 2 | RNVC: 1

21 Apr 2004

5340-27-028-5963
Dashpot Piston

270285963
014079: RNCC: 2 | RNVC: 1

19 Jan 2006

5340-27-044-1855
Swivel Caster

270441855
17603-30: RNCC: 2 | RNVC: 1

14 Jan 2009

5340-27-019-3641
Bail Handle

270193641
ACLC01: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-009-9329
Access Cover

270099329
98012346: RNCC: 2 | RNVC: 1

11 Oct 2001

5340-27-012-0874
Loop Clamp

270120874
96VB 5270 AB: RNCC: 2 | RNVC: 1
4109192: RNCC: 2 | RNVC: 1

11 Jan 2002

5340-27-058-9230
Mounting Bracket

270589230
6R4ZLD18210103: RNCC: 5 | RNVC: 9

30 Apr 2013

5340-27-022-1656
Mending Plate

270221656
1010005016: RNCC: 2 | RNVC: 1

16 Feb 2004

5340-27-019-2203
Flush Catch Claw

270192203
11001DV0105: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-2665
Mounting Bracket

270402665
897392648051: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-059-7024
Bumper

270597024
HPT2: RNCC: 5 | RNVC: 9

1 Oct 2013

5340-27-007-1732
Retaining Clip

270071732
E 865425 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-026-0654
Butt Hinge

270260654
MNT-1: RNCC: 2 | RNVC: 1

30 May 2005

5340-27-021-2375
Butt Hinge

270212375
10131MM0056: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-035-9793
Plug Button

270359793
14059111: RNCC: 2 | RNVC: 1

16 Apr 2007

5340-27-059-6929
Mounting Bracket

270596929
1010FMA-0005024: RNCC: 2 | RNVC: 1

30 Sep 2013

5340-27-053-6860
Butt Hinge

270536860
C171-700050: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-27-001-7773
Butt Hinge

270017773
CESSNA-185-PART0411185: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-040-4166
Mounting Bracket

270404166
030018.00.0.0: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-004-5148
Access Cover

270045148
10121YK5290: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-035-8851
Bridge Clamp

270358851
3C46E200M46BA: RNCC: 2 | RNVC: 1
E863287S212: RNCC: 2 | RNVC: 1

5 Apr 2007

5340-27-011-0707
Mechanical Stop

270110707
56-P-562T1 1: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-047-4324
Angle Bracket

270474324
2.HIBM-3D-420/1: RNCC: 2 | RNVC: 1

2 Dec 2009

5340-27-018-2426
Access Cover

270182426
3.06.14.11: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-021-0192
Strap Hinge Leaf

270210192
1009.1KI.0263-8: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-012-4888
Expansion Plug

270124888
E 650310 S: RNCC: 2 | RNVC: 1

1 Feb 2002

5340-27-049-1645
Mounting Bracket

270491645
S01 001 0001 1650 014 F 02.C: RNCC: 2 | RNVC: 1

8 Apr 2010

5340-27-007-4367
Mounting Bracket

270074367
91AG 13M232 AB: RNCC: 2 | RNVC: 1

11 Nov 1999

5340-27-016-3778
Bow Handle

270163778
6000046104: RNCC: 2 | RNVC: 1
006002316: RNCC: 2 | RNVC: 1
6000046104: RNCC: 2 | RNVC: 1

8 Jan 2003

5340-27-040-3574
Mounting Bracket

270403574
8388985: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-014-9255
Handle Ferrule

270149255
7335710778: RNCC: 2 | RNVC: 1
7335710778: RNCC: 2 | RNVC: 1
7335710778: RNCC: 5 | RNVC: 2

10 Dec 2002

5340-27-056-5031
Mending Plate

270565031
203492: RNCC: 2 | RNVC: 2

4 Apr 2012

5340-27-019-5154
Flush Catch

270195154
07002YM0180: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-056-5000
Mending Plate

270565000
203427: RNCC: 2 | RNVC: 2

4 Apr 2012

5340-27-001-7317
Loop Clamp

270017317
TM55-1520-210-2MS21919WDG-20: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-046-6780
Access Cover

270466780
Y255-71000-206: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-029-6743
Mending Plate

270296743
5PS-17446-00-00: RNCC: 5 | RNVC: 9

1 May 2006

5340-27-024-0768
Mounting Bracket

270240768
1010FK-0000574: RNCC: 2 | RNVC: 1

14 Sep 2004

5340-27-059-6839
Loop Clamp

270596839
901-KL-404: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-056-8648
Mending Plate

270568648
98001093-1: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-043-4964
Mounting Bracket

270434964
901-UM-6: RNCC: 2 | RNVC: 1

14 Nov 2008

5340-27-024-6174
Flush Catch Claw

270246174
F-1983: RNCC: 2 | RNVC: 1

20 Nov 2004

5340-27-021-0744
Flush Catch

270210744
1009.1KI.0125-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-023-9563
Mounting Bracket

270239563
1924150502: RNCC: 2 | RNVC: 1
4.05.09.02: RNCC: 2 | RNVC: 1
4.06.09.02: RNCC: 2 | RNVC: 1

25 Aug 2004

5340-27-004-5520
Retaining Strap

270045520
10091YK5035: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-005-1723
Access Cover

270051723
1010000479: RNCC: 3 | RNVC: 2

14 Feb 1997

Load More Results