What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 20 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 20 of 53

5340-27-050-8562
Mounting Bracket

270508562
10046460: RNCC: 2 | RNVC: 1

3 Sep 2010

5340-27-017-0802
Mounting Bracket

270170802
2903730: RNCC: 2 | RNVC: 1
2903730: RNCC: 2 | RNVC: 1

14 May 2003

5340-27-017-3470
Mounting Bracket

270173470
98013834: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-044-4226
Mounting Bracket

270444226
1.HIBM-1I-2820: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-041-7500
Access Cover

270417500
1010FK-2810848: RNCC: 2 | RNVC: 1

13 Jun 2008

5340-27-060-0377
Mounting Bracket

270600377
MM-7490-0619: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-021-4558
Mortise Lock Set

270214558
07001YK0417: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-6177
Mounting Bracket

270286177
MM-7450-0096-KNM56: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-024-9111
Loop Clamp

270249111
4070046: RNCC: 2 | RNVC: 1

16 Dec 2004

5340-27-021-2127
Mounting Bracket

270212127
1012.1HSCA.02-34: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-4561
Mounting Bracket

270174561
98003226: RNCC: 2 | RNVC: 1

26 Jun 2003

5340-27-051-7664
Mending Plate

270517664
16F10-56130-AA: RNCC: 2 | RNVC: 1

25 Nov 2010

5340-27-005-1589
Lock Key

270051589
1010000118: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-023-9990
Lever Bracket

270239990
10131YB2043: RNCC: 2 | RNVC: 1

4 Sep 2004

5340-27-045-2440
Mending Plate

270452440
6420A001: RNCC: 3 | RNVC: 2

17 Apr 2009

5340-27-022-8206
Loop Clamp

270228206
7.14.01.16: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-023-1918
Access Cover

270231918
98012719-10: RNCC: 2 | RNVC: 1

4 Jun 2004

5340-27-023-1227
Mounting Bracket

270231227
KMS 0046: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-017-3152
Angle Bracket

270173152
44051: RNCC: 2 | RNVC: 1
44051: RNCC: 5 | RNVC: 2

16 Jun 2003

5340-27-049-4918
Lock-Release Lever

270494918
MCT1222512-001: RNCC: 2 | RNVC: 1

4 May 2010

5340-27-058-8610
Ball Socket Seat

270588610
CH87215: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-27-040-6927
Mounting Bracket

270406927
1.HIBM-1I-2685: RNCC: 2 | RNVC: 1

29 Feb 2008

5340-27-057-8022
Bridge Clamp

270578022
1010FMA-1202705: RNCC: 2 | RNVC: 1

23 Oct 2012

5340-27-050-8567
Mounting Bracket

270508567
10046429: RNCC: 2 | RNVC: 1

3 Sep 2010

5340-27-043-0824
Caster Wheel

270430824
0693-150X50X17: RNCC: 2 | RNVC: 1

10 Oct 2008

5340-27-027-6036
Mounting Bracket

270276036
7150724: RNCC: 2 | RNVC: 1

13 Oct 2005

5340-27-058-9375
Mending Plate

270589375
VOE12736168: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-058-2255
Mounting Bracket

270582255
200843: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-008-2452
Mounting Bracket

270082452
98001431: RNCC: 2 | RNVC: 1

24 Aug 2000

5340-27-037-8801
Mounting Bracket

270378801
1650,0X290,0X170,0: RNCC: 2 | RNVC: 1

3 Sep 2007

5340-27-006-9144
Mounting Bracket

270069144
91AB 17A881 BA: RNCC: 2 | RNVC: 1

24 Jun 1999

5340-27-019-8876
Access Cover

270198876
1010FG-1802390: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-015-0256
Loop Clamp

270150256
HSN06-008: RNCC: 2 | RNVC: 1
1010FG-0100960: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-006-9244
Mounting Bracket

270069244
91AG F433A48 AA: RNCC: 2 | RNVC: 1

28 Jun 1999

5340-27-022-4431
Expansion Shield

270224431
DA0012287: RNCC: 2 | RNVC: 1

10 Mar 2004

5340-27-024-9946
Mounting Bracket

270249946
10131YB0685: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-013-4936
Mounting Bracket

270134936
53RS300263: RNCC: 2 | RNVC: 1

24 Jun 2002

5340-27-021-4299
Mounting Bracket

270214299
1010FK-2811756: RNCC: 2 | RNVC: 1
1010FK-2811756: RNCC: 2 | RNVC: 1
1010FK2811756: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-023-2907
Mounting Bracket

270232907
M10.1.2.3: RNCC: 2 | RNVC: 1
M10.1.2.3: RNCC: 2 | RNVC: 1

16 Jun 2004

5340-27-006-9189
Mounting Bracket

270069189
P91AG F46687 AA: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-050-2431
Bow Handle

270502431
KOL,BUYUK: RNCC: 2 | RNVC: 1

12 Jul 2010

5340-27-047-0736
Mending Plate

270470736
13C00-16651-AA: RNCC: 2 | RNVC: 1

2 Nov 2009

5340-27-049-9688
Mending Plate

270499688
HD155160S: RNCC: 2 | RNVC: 2
HD155160S: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-053-3669
Mounting Bracket

270533669
H341122801: RNCC: 2 | RNVC: 1

25 Apr 2011

5340-27-016-7566
Loop Clamp

270167566
2901729: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-008-1689
Handle Grip

270081689
27714: RNCC: 2 | RNVC: 1

28 Jul 2000

5340-27-018-6564
Mounting Bracket

270186564
1010FG-1206814: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-043-5600
Mounting Bracket

270435600
1.HIBM-1I-2784: RNCC: 2 | RNVC: 1

21 Nov 2008

5340-27-017-7264
Angle Bracket

270177264
MKE 401 170-X: RNCC: 2 | RNVC: 1

22 Aug 2003

5340-27-035-6779
Sliding Door Track

270356779
46753205: RNCC: 2 | RNVC: 1

23 Mar 2007

5340-27-017-7267
Angle Bracket

270177267
MKE 401 177-X: RNCC: 2 | RNVC: 1

22 Aug 2003

5340-27-045-6984
Mounting Bracket

270456984
1.HIBM-1I-2855: RNCC: 2 | RNVC: 1

3 Jun 2009

5340-27-007-1608
Retaining Clip

270071608
E 860383 S: RNCC: 2 | RNVC: 1

10 Sep 1999

5340-27-044-5888
Mending Plate

270445888
502-21-CN-0106(SABITLEME SACI): RNCC: 2 | RNVC: 2

18 Feb 2009

5340-27-010-5554
Support Hook

270105554
SBG-03/01: RNCC: 2 | RNVC: 1

3 Dec 2001

5340-27-010-5550
Truss Fairlead

270105550
514A14: RNCC: 2 | RNVC: 1
H24C5-62021: RNCC: 2 | RNVC: 1
SBG-02/36: RNCC: 2 | RNVC: 1

3 Dec 2001

5340-27-050-0722
Mending Plate

270500722
108212: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-009-9334
Access Cover

270099334
98012407: RNCC: 2 | RNVC: 1

11 Oct 2001

5340-27-012-2622
Access Cover

270122622
10131YK0773: RNCC: 2 | RNVC: 1

22 Jan 2002

5340-27-012-1461
Mounting Bracket

270121461
10131YS0912: RNCC: 2 | RNVC: 1

16 Jan 2002

5340-27-034-7834
Mending Plate

270347834
13186424: RNCC: 2 | RNVC: 1

8 Feb 2007

5340-27-022-5899
Mounting Bracket

270225899
24901T: RNCC: 2 | RNVC: 1

25 Mar 2004

5340-27-023-5594
Handle Grip

270235594
TUT-2/700X50X25 MM: RNCC: 2 | RNVC: 1

13 Jul 2004

5340-27-011-8560
Loop Clamp

270118560
1.HIBM-1H-597: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-056-8560
Loop Holder

270568560
901-AT-412-A1: RNCC: 2 | RNVC: 1

21 May 2012

5340-27-021-0148
Mechanical Stop

270210148
1009.1KI.0189-7: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-1700
Access Cover

270051700
1010001146: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-023-7412
Mounting Bracket

270237412
22876T: RNCC: 2 | RNVC: 1

3 Aug 2004

5340-27-019-2017
Mounting Bracket

270192017
11001MP0126: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-022-0801
Mounting Bracket

270220801
1009 1YD 0329: RNCC: 2 | RNVC: 1

6 Feb 2004

5340-27-048-4416
Filler Opening Cap

270484416
A-25: RNCC: 2 | RNVC: 1

9 Feb 2010

5340-27-001-7517
Retaining Strap

270017517
TM55-1520-210-3205-031-481-003: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-025-1161
Loop Clamp

270251161
AN735D19: RNCC: 2 | RNVC: 1

7 Jan 2005

5340-27-022-1042
Mounting Bracket

270221042
1009 1YB 0302: RNCC: 2 | RNVC: 1

10 Feb 2004

5340-27-007-8098
Mounting Bracket

270078098
4B100040: RNCC: 2 | RNVC: 1

23 Feb 2000

5340-27-005-1694
Access Cover

270051694
1010000273: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-034-3324
Mending Plate

270343324
4566230888: RNCC: 2 | RNVC: 1

25 Dec 2006

5340-27-043-5063
Mounting Bracket

270435063
070732C: RNCC: 2 | RNVC: 1

17 Nov 2008

5340-27-006-9501
Mounting Bracket

270069501
P93AG F286K14 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-021-2147
Mounting Bracket

270212147
1012.1HSCA.04-12: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-013-0842
Mounting Bracket

270130842
10131YS0141: RNCC: 2 | RNVC: 1

19 Apr 2002

5340-27-008-9682
Mending Plate

270089682
98001185-2: RNCC: 2 | RNVC: 1

1 Mar 2001

5340-27-033-6359
Mounting Bracket

270336359
40-205-3320: RNCC: 2 | RNVC: 1
40-205-3320: RNCC: 2 | RNVC: 1
40-205-3320: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-040-6205
Mounting Bracket

270406205
571997133051: RNCC: 2 | RNVC: 1

4 Feb 2008

5340-27-054-6595
Mending Plate

270546595
98021357: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-27-038-6994
Mounting Bracket

270386994
10091MK0426: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-054-1628
Mending Plate

270541628
40-052.00/10-127: RNCC: 2 | RNVC: 1

3 Aug 2011

5340-27-056-6630
Mounting Bracket

270566630
MM-7412-0026: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-040-3875
Mounting Bracket

270403875
8574846: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-016-4223
Mending Plate

270164223
81.61540.5021: RNCC: 2 | RNVC: 1

15 Jan 2003

5340-27-057-5723
Mending Plate

270575723
109086: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-028-2644
Mounting Bracket

270282644
M52T3011R450177: RNCC: 2 | RNVC: 1

18 Dec 2005

5340-27-005-1599
Control Rod

270051599
1010001200: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-004-5557
Access Cover

270045557
10091YK5034: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-043-9297
Lock Key

270439297
02026030004: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-014-3919
Catch Strike

270143919
2T14 V21982 AD: RNCC: 2 | RNVC: 1

10 Oct 2002

5340-27-038-2233
Mounting Bracket

270382233
3584146: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-017-3862
Mounting Bracket

270173862
1009.1IS.0044-8: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-048-5554
Mending Plate

270485554
HD240022Y: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-27-001-7289
Loop Clamp

270017289
TM55-1520-210-3MS21919WDG-21: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-058-2227
Tee Hinge

270582227
200744: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-024-3642
Filler Opening Cap

270243642
2K207338: RNCC: 2 | RNVC: 1

15 Oct 2004

5340-27-050-1562
Mending Plate

270501562
107414: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-058-3636
Mending Plate

270583636
CV71706: RNCC: 2 | RNVC: 1

17 Jan 2013

5340-27-008-4589
Rod End Clevis

270084589
8558334: RNCC: 2 | RNVC: 1

12 Oct 2000

5340-27-040-2814
Angle Bracket

270402814
Y530-80121-202: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-051-2433
Utility Access Door

270512433
1955X825MM, CELIK KAPI: RNCC: 2 | RNVC: 1

12 Oct 2010

5340-27-040-4320
Mounting Bracket

270404320
8732844: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-037-4424
Mounting Bracket

270374424
28140-1310: RNCC: 2 | RNVC: 1

31 Jul 2007

5340-27-023-3817
Loop Clamp

270233817
05001FK0150: RNCC: 2 | RNVC: 1

25 Jun 2004

5340-27-022-0553
Mounting Bracket

270220553
KMS 0025: RNCC: 2 | RNVC: 1

29 Jan 2004

5340-27-025-0167
Mounting Bracket

270250167
1009 1YS 1192: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-027-8832
Mounting Bracket

270278832
1010FG-0000803: RNCC: 2 | RNVC: 1

16 Nov 2005

5340-27-049-6665
Mounting Bracket

270496665
031000-001-0: RNCC: 2 | RNVC: 1

18 May 2010

5340-27-015-8506
Loop Clamp

270158506
1010004882: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-032-6532
Butt Hinge Leaf

270326532
40-660-5062: RNCC: 2 | RNVC: 1
40-660-5062: RNCC: 2 | RNVC: 1

29 Aug 2006

5340-27-047-2675
Mounting Bracket

270472675
8K230584: RNCC: 2 | RNVC: 1

17 Nov 2009

5340-27-035-3944
Mending Plate

270353944
2C466694AB: RNCC: 2 | RNVC: 1

13 Mar 2007

5340-27-025-4902
Crank Handle

270254902
10131YS2061: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-007-1825
Access Cover

270071825
E 852049 S: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-034-7412
Bridge Clamp

270347412
11000-16697-AA: RNCC: 2 | RNVC: 1

6 Feb 2007

5340-27-041-5953
Bow Handle

270415953
7254918: RNCC: 2 | RNVC: 1

5 Jun 2008

5340-27-025-1094
Hand Crank

270251094
06625: RNCC: 2 | RNVC: 1

6 Jan 2005

5340-27-022-6589
Catch Strike

270226589
8724 14: RNCC: 2 | RNVC: 1

6 Apr 2004

5340-27-051-3133
Crank Handle

270513133
55RS065122: RNCC: 2 | RNVC: 1

14 Oct 2010

5340-27-022-1584
Expansion Plug

270221584
10121YT5544: RNCC: 2 | RNVC: 1
51916060006: RNCC: 5 | RNVC: 9

16 Feb 2004

5340-27-015-0397
Loop Clamp

270150397
7407393: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-020-7612
Mounting Bracket

270207612
M52T3011R450153: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-037-0326
Mounting Bracket

270370326
C70G85: RNCC: 2 | RNVC: 1

11 Jul 2007

5340-27-034-1459
Catch Strike

270341459
10121YM1222: RNCC: 2 | RNVC: 1

13 Dec 2006

5340-27-038-8603
Mounting Bracket

270388603
2ABEP00256: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-051-2605
Mounting Bracket

270512605
55RS360122: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-27-029-2074
Mounting Bracket

270292074
98AB7N625AA: RNCC: 2 | RNVC: 1

9 Mar 2006

5340-27-047-0712
Mounting Bracket

270470712
13C00-57183-AA: RNCC: 2 | RNVC: 1

2 Nov 2009

5340-27-021-3081
Mending Plate

270213081
1012.1HSCA.02-45: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-1575
Loop Clamp

270051575
1010001907: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-053-8034
Mending Plate

270538034
C175-000120: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-27-017-3681
Handle Grip

270173681
1009.1IS.0068-B/14: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-050-8688
Mounting Bracket

270508688
63D-43128-01-4D: RNCC: 3 | RNVC: 2
63D-43128-01-4D: RNCC: 3 | RNVC: 2

6 Sep 2010

5340-27-017-2026
Mounting Bracket

270172026
6040-0533-9020: RNCC: 2 | RNVC: 1

27 May 2003

5340-27-054-6626
Mounting Bracket

270546626
55RS752925: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-041-4044
Utility Access Door

270414044
87X190 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-009-3952
Mounting Bracket

270093952
10131YA0164: RNCC: 2 | RNVC: 1

28 Jun 2001

5340-27-043-6063
Door Hook

270436063
0157644: RNCC: 2 | RNVC: 1

26 Nov 2008

5340-27-017-3722
Eye Hook

270173722
1009.1IS.0058-22: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-048-6383
Mending Plate

270486383
TY172943: RNCC: 3 | RNVC: 2

17 Feb 2010

5340-27-014-3921
Catch Strike

270143921
2T14 V21982 BB: RNCC: 2 | RNVC: 1

10 Oct 2002

5340-27-035-8230
Mending Plate

270358230
46823986: RNCC: 2 | RNVC: 1

30 Mar 2007

5340-27-050-0254
Utility Access Door

270500254
105X4.5X200CM, KASASIZ GIRIS: RNCC: 2 | RNVC: 1

18 Jun 2010

5340-27-057-6097
Mounting Bracket

270576097
ALTFC01276: RNCC: 2 | RNVC: 1

12 Sep 2012

5340-27-018-9083
Loop Clamp

270189083
115015041: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-2374
Bridge Clamp

270582374
LR019167: RNCC: 2 | RNVC: 1

25 Dec 2012

5340-27-044-2030
Mounting Bracket

270442030
12E01-58508-AA: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-022-0569
Mending Plate

270220569
KMS 0021-36: RNCC: 2 | RNVC: 1

29 Jan 2004

5340-27-048-7955
Mounting Bracket

270487955
9034-98: RNCC: 2 | RNVC: 1
9034-98: RNCC: 5 | RNVC: 9

2 Mar 2010

5340-27-018-6474
Mounting Bracket

270186474
1010FG-0612005-3: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-015-0428
Loop Clamp

270150428
7763369: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-042-0840
Bow Handle

270420840
68280: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-053-5867
Mounting Bracket

270535867
10121YB1210: RNCC: 2 | RNVC: 1

24 May 2011

5340-27-044-1216
Mounting Bracket

270441216
12E00-50307-AA: RNCC: 2 | RNVC: 1

9 Jan 2009

5340-27-059-0042
Mending Plate

270590042
40.6010.200016 120X240: RNCC: 5 | RNVC: 9

14 May 2013

5340-27-026-2127
Access Cover

270262127
06295: RNCC: 2 | RNVC: 1

17 Jun 2005

5340-27-006-9393
Mounting Bracket

270069393
92AG 5N201 AA: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-048-5878
Bridge Clamp

270485878
MF661035Y: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-048-9861
Mending Plate

270489861
103635: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-27-038-1525
Mechanical Stop

270381525
1010FK-2702123: RNCC: 2 | RNVC: 1

18 Sep 2007

5340-27-005-1597
Control Rod

270051597
1010000315: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-024-2971
Mounting Bracket

270242971
1010FG-1831164: RNCC: 2 | RNVC: 1

8 Oct 2004

5340-27-007-1828
Access Cover

270071828
E 852080 S: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-017-3860
Mounting Bracket

270173860
1009.1IS.0028-2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-048-7611
Mounting Bracket

270487611
189392-000-0: RNCC: 2 | RNVC: 1

25 Feb 2010

5340-27-040-2844
Angle Bracket

270402844
Y535-75002-340: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-054-5991
Mounting Bracket

270545991
55RS752942: RNCC: 3 | RNVC: 2

30 Sep 2011

5340-27-011-2449
Butt Hinge

270112449
07002YM0291: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-032-7765
Mounting Bracket

270327765
12E00-70004-AA: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-021-4321
Mounting Bracket

270214321
1012.1HSCA.03-70: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-038-7268
Butt Hinge

270387268
10091YP0179: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-057-2563
Bridge Clamp

270572563
6C1Q9800AC: RNCC: 3 | RNVC: 2

11 Jul 2012

5340-27-017-3759
Bail Handle

270173759
1009.1IS.0068-A/14: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-046-3686
Mending Plate

270463686
NRC4318-L: RNCC: 2 | RNVC: 1

31 Jul 2009

5340-27-053-5229
Mending Plate

270535229
10131YP1502: RNCC: 2 | RNVC: 1

13 May 2011

5340-27-034-6783
Mounting Bracket

270346783
8200190: RNCC: 2 | RNVC: 1

1 Feb 2007

5340-27-056-8690
Mending Plate

270568690
202615: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-029-2810
Mending Plate

270292810
1010FK-2810718-2: RNCC: 2 | RNVC: 1

17 Mar 2006

5340-27-053-8334
Caster Wheel

270538334
LC.BM.7.10.01.10-1: RNCC: 3 | RNVC: 1

28 Jun 2011

5340-27-037-2404
Sliding Door Track

270372404
58RS112041: RNCC: 2 | RNVC: 1

19 Jul 2007

5340-27-047-0729
Mounting Bracket

270470729
13C00-01790-AA: RNCC: 2 | RNVC: 1

2 Nov 2009

5340-27-001-7457
Rod End Clevis

270017457
TM55-1520-210-2204-072-404-001: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-057-9561
Mounting Bracket

270579561
16042-ZY3-000: RNCC: 2 | RNVC: 1

22 Nov 2012

5340-27-036-9446
Mending Plate

270369446
C01AG49: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-017-3761
Bail Handle

270173761
1009.1IS.0098: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-049-5563
Handle Grip

270495563
897135386351: RNCC: 2 | RNVC: 1

10 May 2010

5340-27-010-2971
Mounting Bracket

270102971
10131YS0811: RNCC: 2 | RNVC: 1

23 Nov 2001

5340-27-026-0259
Access Cover

270260259
1010FG-1802378: RNCC: 2 | RNVC: 1

20 May 2005

5340-27-049-8457
Utility Access Door

270498457
187X197CM, PVC LAMBRI: RNCC: 2 | RNVC: 1

7 Jun 2010

5340-27-044-1478
Catch Strike

270441478
21A17-55362-AA: RNCC: 2 | RNVC: 1

12 Jan 2009

5340-27-020-7922
Elastic Strap

270207922
05005YM1416: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-3232
Mounting Bracket

270563232
3834292: RNCC: 3 | RNVC: 2

14 Mar 2012

5340-27-015-8535
Loop Clamp

270158535
1010004891: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-027-0073
Catch Strike

270270073
10131YK2031: RNCC: 2 | RNVC: 1

19 Aug 2005

5340-27-054-2063
Mending Plate

270542063
98019512: RNCC: 2 | RNVC: 2

8 Aug 2011

5340-27-001-7415
Track Stop

270017415
204-072-085-003: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-27-052-1988
Mounting Bracket

270521988
8.216.755.000.0: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-27-048-9866
Mending Plate

270489866
108566: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-27-049-4844
Mending Plate

270494844
107560-302: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-039-6231
Flush Lock

270396231
YTE.190.EM.002.012: RNCC: 2 | RNVC: 1

11 Dec 2007

5340-27-022-2583
Expansion Plug

270222583
000443020000: RNCC: 2 | RNVC: 1
10121YT5610: RNCC: 2 | RNVC: 1

20 Feb 2004

5340-27-016-9325
Loop Clamp

270169325
51.97401.6066: RNCC: 2 | RNVC: 1

11 Apr 2003

5340-27-050-6307
Mounting Bracket

270506307
38089: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-27-050-0702
Mending Plate

270500702
104458: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-057-9503
Elastic Strap

270579503
10.0020.0208: RNCC: 3 | RNVC: 2

21 Nov 2012

5340-27-048-7364
Loop Clamp

270487364
7291-17: RNCC: 2 | RNVC: 1
7291-17: RNCC: 5 | RNVC: 9

24 Feb 2010

5340-27-053-8276
Mending Plate

270538276
C173-100191: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-27-021-5349
Mending Plate

270215349
1010FK-0000272: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-4843
Mending Plate

270494843
107560-301: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-053-3023
Mounting Bracket

270533023
740.06.10-02.047: RNCC: 3 | RNVC: 2

18 Apr 2011

5340-27-037-8725
Truss Fairlead

270378725
59440-03H00: RNCC: 5 | RNVC: 9

3 Sep 2007

5340-27-038-6318
Mending Plate

270386318
83A19-36957-AA: RNCC: 2 | RNVC: 1

23 Oct 2007

5340-27-039-6520
Mounting Bracket

270396520
897138673051: RNCC: 2 | RNVC: 1

12 Dec 2007

5340-27-016-9317
Loop Clamp

270169317
06.67300.0936: RNCC: 2 | RNVC: 1
1UA-82591-00-00: RNCC: 2 | RNVC: 1

11 Apr 2003

5340-27-042-9900
Mounting Bracket

270429900
40.624.0137: RNCC: 2 | RNVC: 1
40.624.0137: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-044-1528
Angle Bracket

270441528
AMJP24E6: RNCC: 2 | RNVC: 1

13 Jan 2009

5340-27-021-1032
Loop Clamp

270211032
897066288001: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-1899
Mounting Bracket

270211899
1012.1HSCA.02-27: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-026-2639
Access Cover

270262639
500123482755: RNCC: 2 | RNVC: 1

23 Jun 2005

5340-27-045-1950
Mending Plate

270451950
MB092153: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-27-056-2939
Mounting Bracket

270562939
MM-7560-0061: RNCC: 2 | RNVC: 2

9 Mar 2012

5340-27-049-8523
Tee Hinge

270498523
107485: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-059-7516
Loop Clamp

270597516
5111400041: RNCC: 2 | RNVC: 2

22 Oct 2013

5340-27-057-6574
Loop Clamp

270576574
84X91 MM: RNCC: 2 | RNVC: 1

19 Sep 2012

5340-27-053-2925
Mounting Bracket

270532925
H341159701: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-049-1598
Mending Plate

270491598
7703602206: RNCC: 3 | RNVC: 2

8 Apr 2010

5340-27-053-2892
Mounting Bracket

270532892
H231100600: RNCC: 2 | RNVC: 1

15 Apr 2011

5340-27-050-9672
Mounting Bracket

270509672
13C00-57231-AB: RNCC: 2 | RNVC: 1

20 Sep 2010

5340-27-046-8202
Mounting Bracket

270468202
901-MK-177: RNCC: 2 | RNVC: 1

12 Oct 2009

5340-27-053-9906
Support Hook

270539906
109933: RNCC: 2 | RNVC: 2

14 Jul 2011

5340-27-048-3587
Loop Clamp

270483587
5427962A: RNCC: 2 | RNVC: 1

2 Feb 2010

5340-27-004-6060
Loop Clamp

270046060
10131YMN0111: RNCC: 2 | RNVC: 1

4 May 1999

5340-27-021-1907
Mounting Bracket

270211907
1012.1HSCA.02-22: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-4441
Bow Handle

270564441
203647: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-048-5125
Mending Plate

270485125
HD152143Y: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-27-005-1757
Rod End Connector

270051757
1010002613: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-007-1748
Retaining Clip

270071748
E 866246 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-056-4492
Mending Plate

270564492
202877: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-048-6919
Access Cover

270486919
7168-36: RNCC: 2 | RNVC: 1
7168-36: RNCC: 5 | RNVC: 9

19 Feb 2010

5340-27-039-3496
Lock-Release Lever

270393496
27001-109: RNCC: 2 | RNVC: 1

27 Nov 2007

5340-27-043-3881
Mounting Bracket

270433881
1.HIBM-1Q-911: RNCC: 2 | RNVC: 1

5 Nov 2008

5340-27-034-1931
Bridge Clamp

270341931
49918: RNCC: 5 | RNVC: 9

15 Dec 2006

5340-27-055-7931
Mounting Bracket

270557931
3950450001: RNCC: 2 | RNVC: 2
MV1: RNCC: 2 | RNVC: 2

5 Jan 2012

5340-27-058-1306
Mounting Bracket

270581306
1010FMA-1801296: RNCC: 2 | RNVC: 1

13 Dec 2012

5340-27-019-5437
Recess Handle

270195437
07002YT0039: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-013-0844
Mounting Bracket

270130844
10131YS0829: RNCC: 2 | RNVC: 1

19 Apr 2002

5340-27-015-0380
Loop Clamp

270150380
7385176: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-051-3154
Bow Handle

270513154
13F10-67173-AA: RNCC: 2 | RNVC: 1

14 Oct 2010

5340-27-016-5292
Mending Plate

270165292
81.66912.0170: RNCC: 2 | RNVC: 1

3 Feb 2003

5340-27-055-7274
Mending Plate

270557274
5083848: RNCC: 2 | RNVC: 2

30 Dec 2011

5340-27-015-7890
Handle Ferrule

270157890
2106000109: RNCC: 2 | RNVC: 1

11 Dec 2002

5340-27-009-1348
Truss Fairlead

270091348
BG-04-01-035: RNCC: 2 | RNVC: 1

8 May 2001

5340-27-034-0395
Mounting Bracket

270340395
12E00-08054-AA: RNCC: 2 | RNVC: 1

6 Dec 2006

5340-27-022-6337
Bow Handle

270226337
20339T: RNCC: 2 | RNVC: 1

1 Apr 2004

5340-27-022-1012
Mending Plate

270221012
1009 1YD 0178: RNCC: 2 | RNVC: 1

10 Feb 2004

5340-27-056-8654
Mending Plate

270568654
105459: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-042-0789
Catch Strike

270420789
37896: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-043-7517
Mounting Bracket

270437517
OBK0018: RNCC: 1 | RNVC: 2

5 Dec 2008

5340-27-039-3467
Loop Clamp

270393467
10131YK2064: RNCC: 2 | RNVC: 1

27 Nov 2007

5340-27-059-2998
Mending Plate

270592998
98020604: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-008-1001
Expansion Plug

270081001
8B82044: RNCC: 2 | RNVC: 1

4 Jul 2000

5340-27-015-8497
Loop Clamp

270158497
1010004873: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-008-5217
Access Cover

270085217
8859216: RNCC: 2 | RNVC: 1

25 Oct 2000

5340-27-026-3296
Flush Catch

270263296
901-YK-68-2: RNCC: 2 | RNVC: 1

29 Jun 2005

5340-27-049-4766
Mounting Bracket

270494766
107290: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-008-6637
Catch Strike

270086637
7585881: RNCC: 2 | RNVC: 1

11 Dec 2000

5340-27-003-9179
Loop Clamp

270039179
07001MN0647: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-020-4398
Webbing Strap

270204398
98013954: RNCC: 2 | RNVC: 1

8 Dec 2003

5340-27-041-7992
Webbing Strap

270417992
KETEN TRET: RNCC: 2 | RNVC: 1

19 Jun 2008

5340-27-038-7324
Mounting Bracket

270387324
10091YS1190: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-057-6758
Mending Plate

270576758
I-61410: RNCC: 2 | RNVC: 1

21 Sep 2012

5340-27-026-0810
Butt Hinge Leaf

270260810
1010FK-1807632-1: RNCC: 2 | RNVC: 1

1 Jun 2005

5340-27-017-4938
Access Cover

270174938
3.06.14.09: RNCC: 2 | RNVC: 1

2 Jul 2003

5340-27-041-1697
Utility Access Door

270411697
90X220 CM KAPI,ALUMINYUM: RNCC: 2 | RNVC: 1

6 May 2008

5340-27-008-2463
Mounting Bracket

270082463
98000711: RNCC: 2 | RNVC: 1

24 Aug 2000

5340-27-021-0739
Flush Catch

270210739
1009.1KI.01647*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-018-6234
Mounting Bracket

270186234
1010FG-1401853: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-035-9204
Plug Button

270359204
46423671: RNCC: 2 | RNVC: 1

10 Apr 2007

5340-27-057-6455
Mounting Bracket

270576455
TT070548: RNCC: 2 | RNVC: 1

17 Sep 2012

5340-27-022-0221
Compression Cup

270220221
22645: RNCC: 2 | RNVC: 1

26 Jan 2004

5340-27-006-9522
Mounting Bracket

270069522
95AG A024A15 AG: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-037-4592
Mending Plate

270374592
51714414: RNCC: 2 | RNVC: 1

31 Jul 2007

5340-27-042-6396
Mounting Bracket

270426396
2ABEP00812: RNCC: 2 | RNVC: 1

2 Sep 2008

5340-27-048-2519
Catch Strike

270482519
377771875001: RNCC: 2 | RNVC: 1

21 Jan 2010

5340-27-050-9804
Mounting Bracket

270509804
6F5-81830-11: RNCC: 3 | RNVC: 2
6F5-81830-11: RNCC: 3 | RNVC: 2

21 Sep 2010

5340-27-048-0036
Mounting Bracket

270480036
14010014: RNCC: 2 | RNVC: 2
140100592: RNCC: 3 | RNVC: 2

28 Dec 2009

5340-27-035-7985
Sliding Door Track

270357985
51769071: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-020-3978
Door Hook

270203978
D53: RNCC: 2 | RNVC: 1

5 Dec 2003

5340-27-040-3510
Mounting Bracket

270403510
2ABEP00518: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-053-5083
Mounting Bracket

270535083
H342731600: RNCC: 2 | RNVC: 1

12 May 2011

5340-27-034-8904
Mounting Bracket

270348904
10091KI0078: RNCC: 2 | RNVC: 1

14 Feb 2007

5340-27-015-0666
Mending Plate

270150666
15001YA3012: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-032-4706
Mounting Bracket

270324706
16001YS0020: RNCC: 2 | RNVC: 1

19 Jul 2006

5340-27-029-1879
Mounting Bracket

270291879
4363300074: RNCC: 2 | RNVC: 1

8 Mar 2006

5340-27-041-0311
Mending Plate

270410311
ML103326: RNCC: 2 | RNVC: 1

22 Apr 2008

5340-27-017-3638
Mending Plate

270173638
1009.1IS.0068-B/15: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-6486
Loop Clamp

270216486
KELEPCE 2: RNCC: 2 | RNVC: 1

22 Dec 2003

5340-27-050-9900
Access Cover

270509900
703-82119-00: RNCC: 3 | RNVC: 2
703-82119-00: RNCC: 3 | RNVC: 2

22 Sep 2010

5340-27-038-5103
Mounting Bracket

270385103
MM-7450-0093: RNCC: 2 | RNVC: 1

10 Oct 2007

5340-27-020-6663
Block Clamp

270206663
12071YK0922: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-3950
Mounting Bracket

270533950
H342409100: RNCC: 2 | RNVC: 1

28 Apr 2011

5340-27-054-6884
Mending Plate

270546884
98021363: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-021-4592
Mending Plate

270214592
1010FG-1804497: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-4506
Mounting Bracket

270544506
5B64463: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-27-017-0442
Mounting Bracket

270170442
300.01.00025: RNCC: 2 | RNVC: 1

16 May 2003

5340-27-058-1506
Handle Ferrule

270581506
1010008105: RNCC: 2 | RNVC: 1

14 Dec 2012

5340-27-025-4073
Access Cover

270254073
1010FK-1804731-1: RNCC: 2 | RNVC: 1

11 Mar 2005

5340-27-056-8644
Mending Plate

270568644
98000557-6: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-042-1633
Mounting Bracket

270421633
2.HIBM-4L-592/4-9: RNCC: 2 | RNVC: 1
JGFJ: RNCC: 2 | RNVC: 1

23 Jul 2008

5340-27-024-7618
Mounting Bracket

270247618
062010314: RNCC: 2 | RNVC: 1

1 Dec 2004

5340-27-017-4247
Angle Bracket

270174247
EIBM-AA5-822: RNCC: 2 | RNVC: 1

20 Jun 2003

5340-27-023-1127
Mounting Bracket

270231127
2ABM 1MK 0035: RNCC: 2 | RNVC: 1

28 May 2004

5340-27-059-3045
Access Cover

270593045
98019105-2: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-025-2249
Loop Clamp

270252249
B0C1458: RNCC: 2 | RNVC: 1

4 Feb 2005

5340-27-039-3228
Access Cover

270393228
20459898: RNCC: 2 | RNVC: 1

26 Nov 2007

5340-27-018-6624
Mounting Bracket

270186624
1010FK-2702273: RNCC: 2 | RNVC: 1
1010FK-2702273: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-023-1245
Mounting Bracket

270231245
2ABM 1MK 0026: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-056-5320
Access Cover

270565320
3835028: RNCC: 2 | RNVC: 2

9 Apr 2012

5340-27-020-7533
Mounting Bracket

270207533
1009.1KI.0339-12: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-3690
Loop Clamp

270593690
VOE20405755: RNCC: 3 | RNVC: 2

23 Jul 2013

5340-27-047-8746
Mounting Bracket

270478746
13C25-38155-AA: RNCC: 3 | RNVC: 2

21 Dec 2009

5340-27-011-2432
Butt Hinge

270112432
07002YM0304: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-042-5805
Access Cover

270425805
54555107: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-054-5540
Mounting Bracket

270545540
98022499: RNCC: 3 | RNVC: 2

23 Sep 2011

5340-27-052-8049
Mending Plate

270528049
80 12 799 85R: RNCC: 2 | RNVC: 2

25 Feb 2011

5340-27-004-5524
Loop Clamp

270045524
10091YK5036: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-028-7781
Mounting Bracket

270287781
884-5800-996: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-059-7601
Mounting Bracket

270597601
9999-0000-0350: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-052-0321
Bow Handle

270520321
3C46E045B15AB: RNCC: 2 | RNVC: 1

15 Dec 2010

5340-27-021-3090
Mending Plate

270213090
1012.1HSCA.02-05: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-4673
Mending Plate

270284673
72A25-35405-AA: RNCC: 2 | RNVC: 1

3 Jan 2006

5340-27-026-8778
Mounting Bracket

270268778
TUF-400-2: RNCC: 2 | RNVC: 1

8 Aug 2005

5340-27-027-4886
Mounting Bracket

270274886
71A22-36698-AA: RNCC: 2 | RNVC: 1

6 Oct 2005

5340-27-026-8692
Mounting Bracket

270268692
1010FK-0000141-3: RNCC: 2 | RNVC: 1

8 Aug 2005

5340-27-051-4691
Angle Bracket

270514691
Y532-66102-200: RNCC: 2 | RNVC: 1

1 Nov 2010

5340-27-055-2246
Mounting Bracket

270552246
1010FMA-0005301: RNCC: 3 | RNVC: 2

22 Nov 2011

5340-27-024-2536
Mounting Bracket

270242536
92460-25000: RNCC: 2 | RNVC: 1

6 Oct 2004

5340-27-020-8879
Hook Handle

270208879
11051YBL002: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-3108
Handle Grip

270573108
YAN BAGAJ TUTAMAK 0 345: RNCC: 5 | RNVC: 9

17 Jul 2012

5340-27-035-0383
Angle Bracket

270350383
901-TP-282: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-022-0140
Clamping Catch

270220140
22542: RNCC: 2 | RNVC: 1

23 Jan 2004

5340-27-021-8054
Butt Hinge

270218054
10101YM0065: RNCC: 2 | RNVC: 1

30 Dec 2003

5340-27-047-1090
Mounting Bracket

270471090
73A24-76022-AA: RNCC: 2 | RNVC: 1

5 Nov 2009

5340-27-059-1354
Rod End Clevis

270591354
901-CH-135: RNCC: 2 | RNVC: 1

3 Jun 2013

5340-27-017-6936
Mounting Bracket

270176936
H-39-0465-50: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-056-7090
Mounting Bracket

270567090
MM-7412-0156: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-051-3196
Access Cover

270513196
SAP-A6-01-07: RNCC: 3 | RNVC: 2

15 Oct 2010

5340-27-038-2220
Mounting Bracket

270382220
3583576: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-017-3723
Eye Hook

270173723
1009.1IS.0071-D10: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-059-1035
Lock-Release Lever

270591035
KOL KAPAK KILITSAG: RNCC: 2 | RNVC: 1

27 May 2013

5340-27-051-4880
Mounting Bracket

270514880
400253-007: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-27-057-6503
Mending Plate

270576503
MM-7767-0027: RNCC: 2 | RNVC: 1

18 Sep 2012

5340-27-051-6655
Mending Plate

270516655
3EC-50-22110: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-27-056-6657
Mounting Bracket

270566657
MM-7412-0270: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-060-0570
Mounting Bracket

270600570
MN-7490-0007: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-060-0415
Mounting Bracket

270600415
MM-7490-0238: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-025-0173
Mounting Bracket

270250173
10131YS0619: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-050-3867
Mending Plate

270503867
105326: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-050-6535
Mounting Bracket

270506535
274.1.E: RNCC: 2 | RNVC: 1

13 Aug 2010

5340-27-035-0800
Mending Plate

270350800
81514015001: RNCC: 2 | RNVC: 1

26 Feb 2007

5340-27-050-3245
Mending Plate

270503245
5986-0035-9000: RNCC: 3 | RNVC: 2

19 Jul 2010

5340-27-048-5868
Catch Strike

270485868
MC324121PY: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-052-1993
Mounting Bracket

270521993
8.216.754.000.0: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-27-005-4543
Butt Hinge

270054543
K5A-4026: RNCC: 3 | RNVC: 2

3 Dec 1997

5340-27-051-1812
Detent Plunger

270511812
101847: RNCC: 3 | RNVC: 2

8 Oct 2010

5340-27-046-9403
Access Cover

270469403
40.270.5991: RNCC: 2 | RNVC: 1

22 Oct 2009

5340-27-035-9801
Plug Button

270359801
71728805: RNCC: 2 | RNVC: 1

16 Apr 2007

5340-27-054-6630
Mounting Bracket

270546630
55RS752830: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-011-2430
Butt Hinge

270112430
07002YM0299: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-027-6287
Mending Plate

270276287
72B13-36650-AA: RNCC: 2 | RNVC: 1

14 Oct 2005

5340-27-009-0893
T Bracket

270090893
98000767: RNCC: 2 | RNVC: 1

26 Apr 2001

5340-27-042-8094
Bridge Clamp

270428094
346722-L: RNCC: 2 | RNVC: 1

12 Sep 2008

5340-27-005-1451
Loop Clamp

270051451
1010000521: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-035-6200
Bridge Clamp

270356200
81.43410.0266: RNCC: 2 | RNVC: 1

22 Mar 2007

5340-27-051-1080
Mending Plate

270511080
103764: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-027-4837
Flush Catch

270274837
6009-0534-1017: RNCC: 2 | RNVC: 1

6 Oct 2005

5340-27-028-6123
Mounting Bracket

270286123
MM-7450-0096-KNM8: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-048-7362
Mounting Bracket

270487362
7291-06: RNCC: 2 | RNVC: 1
7291-06: RNCC: 5 | RNVC: 9

24 Feb 2010

5340-27-059-7677
Mounting Bracket

270597677
9999-0000-0348: RNCC: 2 | RNVC: 1

31 Oct 2013

5340-27-048-0179
Mending Plate

270480179
51RS980208: RNCC: 2 | RNVC: 1

29 Dec 2009

5340-27-034-3656
Mounting Bracket

270343656
4283327: RNCC: 2 | RNVC: 1

26 Dec 2006

5340-27-055-6967
Mounting Bracket

270556967
4959777: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-021-3999
Mounting Bracket

270213999
1012.1HSCA.02-23: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-025-2977
Mounting Bracket

270252977
10131YS0645: RNCC: 2 | RNVC: 1

22 Feb 2005

5340-27-021-2845
Mounting Bracket

270212845
1009.1KI.0321-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-029-1519
Catch Strike

270291519
46532136: RNCC: 2 | RNVC: 1

6 Mar 2006

5340-27-053-8535
Catch Strike

270538535
H346037000: RNCC: 2 | RNVC: 1

28 Jun 2011

5340-27-052-6539
Mending Plate

270526539
107560-303: RNCC: 3 | RNVC: 2

14 Feb 2011

5340-27-004-5167
Mounting Plate

270045167
10121YT5428: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-027-5971
Loop Holder

270275971
2ABM1IMZA0011: RNCC: 2 | RNVC: 1

13 Oct 2005

5340-27-050-2429
Bow Handle

270502429
KOL, 60.LIK: RNCC: 2 | RNVC: 1

12 Jul 2010

5340-27-035-9795
Plug Button

270359795
12568440: RNCC: 2 | RNVC: 1

16 Apr 2007

5340-27-004-5514
Expansion Plug

270045514
10091YT5036: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-017-2149
Mounting Bracket

270172149
ME-01-0018-50: RNCC: 2 | RNVC: 1

28 May 2003

5340-27-020-6206
Loop Clamp

270206206
4730KLPE9880010: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-043-3498
Lock-Release Lever

270433498
74A05-62215-AA: RNCC: 2 | RNVC: 1

31 Oct 2008

5340-27-054-6869
Mounting Bracket

270546869
98021584: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-050-3850
Mending Plate

270503850
105205: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-049-8488
Mending Plate

270498488
108603: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-036-6328
Mending Plate

270366328
2C466C740AA: RNCC: 2 | RNVC: 1

18 Jun 2007

5340-27-024-5574
Screw Hook

270245574
10131YS0669: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-015-7108
Lever Bracket

270157108
10091YT0143: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-020-7529
Mounting Bracket

270207529
1009.1KI.0117-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-4141
Plug Button

270554141
5171717: RNCC: 2 | RNVC: 2

5 Dec 2011

5340-27-044-5209
Expansion Plug

270445209
53RS803095: RNCC: 2 | RNVC: 1

12 Feb 2009

5340-27-034-2928
Utility Access Door

270342928
CM-7104022: RNCC: 2 | RNVC: 1

22 Dec 2006

5340-27-026-7177
Crank Handle

270267177
7701203023: RNCC: 2 | RNVC: 1

22 Jul 2005

5340-27-021-8398
Mounting Bracket

270218398
1009 1YK 0061: RNCC: 2 | RNVC: 1

5 Jan 2004

5340-27-036-9467
Mending Plate

270369467
C77AK40: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-019-0350
Butt Hinge

270190350
M0106A-F18: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-028-7611
Mounting Bracket

270287611
884-5810-965: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-018-5228
Mounting Bracket

270185228
150-8490-60: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-028-1655
Mounting Bracket

270281655
72A10-36237-AB: RNCC: 2 | RNVC: 1

8 Dec 2005

5340-27-010-0648
Bridge Clamp

270100648
5615 51: RNCC: 2 | RNVC: 1

26 Oct 2001

5340-27-008-1687
Handle Grip

270081687
27743: RNCC: 2 | RNVC: 1

28 Jul 2000

5340-27-001-2657
Access Cover

270012657
102430037: RNCC: 3 | RNVC: 2

7 Jan 1994

5340-27-041-4045
Utility Access Door

270414045
88X190 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-040-4523
Mounting Bracket

270404523
10864338: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-020-7567
Mounting Bracket

270207567
1009.1KI.0117-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-3084
Loop Holder

270203084
10131YK0919: RNCC: 2 | RNVC: 1

1 Dec 2003

5340-27-007-1728
Retaining Clip

270071728
E 865065 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-008-3409
Mounting Bracket

270083409
6040-0514-4006: RNCC: 2 | RNVC: 1
6040-0514-4006: RNCC: 2 | RNVC: 1

20 Sep 2000

5340-27-053-7800
Mending Plate

270537800
C163-100210: RNCC: 3 | RNVC: 2

17 Jun 2011

5340-27-022-1047
Catch Strike

270221047
9BM 5340-00007: RNCC: 2 | RNVC: 1

10 Feb 2004

5340-27-040-3699
Mounting Bracket

270403699
11654861: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-018-7157
Access Cover

270187157
1010FK-1911341: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-006-8774
Flush Catch Claw

270068774
10131YM0165: RNCC: 2 | RNVC: 1

7 Jun 1999

5340-27-019-9505
Loop Clamp

270199505
Q521100076: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-022-0243
Mounting Bracket

270220243
10131YS1588: RNCC: 2 | RNVC: 1

26 Jan 2004

5340-27-047-9179
Mending Plate

270479179
6T-9928: RNCC: 3 | RNVC: 2

23 Dec 2009

5340-27-006-9415
Mounting Bracket

270069415
P91AG A04504 AA: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-006-9246
Mounting Bracket

270069246
91AG F47076 AA: RNCC: 2 | RNVC: 1

28 Jun 1999

5340-27-036-2700
Rod End Clevis

270362700
JCT3304BA: RNCC: 2 | RNVC: 1

18 May 2007

5340-27-025-3457
Access Cover

270253457
1010FG-0000784: RNCC: 2 | RNVC: 1

28 Feb 2005

5340-27-053-0116
Sliding Door Track

270530116
2T14 V25004BC: RNCC: 2 | RNVC: 1

15 Mar 2011

5340-27-028-7730
Mounting Bracket

270287730
884-5800-805: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-028-0782
Butt Hinge

270280782
72A30-68544-AA: RNCC: 2 | RNVC: 1

29 Nov 2005

5340-27-060-0560
Mounting Bracket

270600560
MN-7490-0054: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-033-0554
Mounting Bracket

270330554
13D00-57177-AA: RNCC: 2 | RNVC: 1

13 Oct 2006

5340-27-058-8726
Mounting Bracket

270588726
VOE12742499: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-27-057-7458
Mending Plate

270577458
4274789: RNCC: 2 | RNVC: 1

9 Oct 2012

5340-27-052-2486
Mending Plate

270522486
16F10-56166-AA: RNCC: 2 | RNVC: 1

29 Dec 2010

5340-27-008-7048
Access Cover

270087048
DR-00052-00: RNCC: 2 | RNVC: 1

19 Dec 2000

5340-27-005-1704
Access Cover

270051704
1010001307: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-044-1463
Angle Bracket

270441463
AMJP24H14: RNCC: 2 | RNVC: 1

12 Jan 2009

5340-27-059-5501
Angle Bracket

270595501
901-DS-113: RNCC: 2 | RNVC: 1

4 Sep 2013

5340-27-059-6409
Loop Clamp

270596409
901-KL-323: RNCC: 2 | RNVC: 1

23 Sep 2013

5340-27-052-7438
Bow Handle

270527438
80 96 000 17R: RNCC: 2 | RNVC: 2

21 Feb 2011

5340-27-054-6598
Mending Plate

270546598
98021359: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-27-035-0415
Access Cover

270350415
1010FG-0306174: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-014-9275
Caster Wheel

270149275
2630-31968-00015: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-051-1087
Mending Plate

270511087
104670: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-024-5603
Mounting Bracket

270245603
1009 1YK 0855: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-039-1725
Mounting Bracket

270391725
1.HIBM-1I-2676: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-015-0418
Loop Clamp

270150418
7725524: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-006-8324
Mounting Plate

270068324
10029-0031: RNCC: 2 | RNVC: 1
10029-0031: RNCC: 2 | RNVC: 1

20 May 1999

5340-27-056-8783
Mending Plate

270568783
200737: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-047-8670
Butt Hinge

270478670
13E00-57352-AB: RNCC: 2 | RNVC: 1

21 Dec 2009

5340-27-018-6675
Mounting Bracket

270186675
1010FK-1911480: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-022-1063
Catch Strike

270221063
2822T: RNCC: 2 | RNVC: 1

10 Feb 2004

5340-27-005-1732
Access Cover

270051732
1010000709: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-017-3859
Mounting Bracket

270173859
1009.1IS.0044: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-054-0420
Bridge Clamp

270540420
98018320: RNCC: 3 | RNVC: 2

19 Jul 2011

5340-27-013-0979
Mending Plate

270130979
81.97487.0747: RNCC: 2 | RNVC: 1

25 Apr 2002

5340-27-015-0407
Loop Clamp

270150407
7704420: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-007-2219
Access Cover

270072219
10000062: RNCC: 2 | RNVC: 1

4 Oct 1999

5340-27-024-3281
Bow Handle

270243281
81DBH002K88AAW: RNCC: 2 | RNVC: 1

13 Oct 2004

5340-27-059-9928
Butt Hinge

270599928
466-80X28X2: RNCC: 5 | RNVC: 9

23 Dec 2013

5340-27-021-0337
Mounting Bracket

270210337
1009.1KI.0353-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-4910
Mounting Bracket

270554910
5441461-B: RNCC: 2 | RNVC: 2

8 Dec 2011

5340-27-006-9022
Mounting Bracket

270069022
A 437 426 03 46: RNCC: 2 | RNVC: 1

22 Jun 1999

5340-27-007-3627
Retaining Clip

270073627
W 702621 S300: RNCC: 2 | RNVC: 1

26 Oct 1999

5340-27-018-1887
Rod End Clevis

270181887
10121YA5054: RNCC: 2 | RNVC: 1

6 Nov 2003

5340-27-040-3870
Mounting Bracket

270403870
11615412: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-042-0340
Mounting Bracket

270420340
894328234051: RNCC: 2 | RNVC: 1

11 Jul 2008

5340-27-035-0340
Mounting Bracket

270350340
1010005816: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-053-8130
Bridge Clamp

270538130
A544-110400: RNCC: 2 | RNVC: 2

23 Jun 2011

5340-27-012-2926
Rod Retainer Clip

270122926
W701470: RNCC: 2 | RNVC: 1

23 Jan 2002

5340-27-058-3584
Expansion Plug

270583584
944508: RNCC: 2 | RNVC: 1

16 Jan 2013

5340-27-058-2306
Loop Clamp

270582306
55RS650838: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-012-1457
Mounting Bracket

270121457
10131 YS 0911: RNCC: 2 | RNVC: 1

16 Jan 2002

5340-27-043-6804
Butt Hinge

270436804
SAG NO:10: RNCC: 2 | RNVC: 1

2 Dec 2008

5340-27-053-0422
Expansion Plug

270530422
E650313S: RNCC: 2 | RNVC: 1

22 Mar 2011

5340-27-052-4071
Mending Plate

270524071
72C03-73696-AA: RNCC: 2 | RNVC: 1

19 Jan 2011

5340-27-023-6231
Mounting Bracket

270236231
2ABMK 00530: RNCC: 2 | RNVC: 1

20 Jul 2004

5340-27-040-2858
Angle Bracket

270402858
Y532-66015-202: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-038-2224
Mounting Bracket

270382224
3584458: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-044-1800
Mounting Bracket

270441800
17606-92: RNCC: 2 | RNVC: 1

14 Jan 2009

5340-27-041-4111
Utility Access Door

270414111
145X143 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-038-1000
Mounting Bracket

270381000
46289-89978: RNCC: 5 | RNVC: 9

13 Sep 2007

5340-27-021-3077
Mending Plate

270213077
1012.1HSCA.02-19: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-0526
Mending Plate

270580526
24850-ZV5-000: RNCC: 2 | RNVC: 1

5 Dec 2012

5340-27-025-1653
Bail Handle

270251653
2510-ATF-0167: RNCC: 2 | RNVC: 1

24 Jan 2005

5340-27-027-5917
Mounting Bracket

270275917
12A17-55362-AA: RNCC: 2 | RNVC: 1

13 Oct 2005

Load More Results