What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 2 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 2 of 53

5340-27-012-8752
Mounting Bracket

270128752
98012782: RNCC: 2 | RNVC: 1

29 Mar 2002

5340-27-025-7077
Rod End Clevis

270257077
2ABM 1MK 0063: RNCC: 2 | RNVC: 1

31 Mar 2005

5340-27-046-3099
Sliding Door Track

270463099
KAPI RAYI: RNCC: 2 | RNVC: 1

28 Jul 2009

5340-27-053-0117
Sliding Door Track

270530117
2T14 V250A12BB: RNCC: 3 | RNVC: 2

15 Mar 2011

5340-27-020-9394
Mounting Bracket

270209394
1009.1KI.0263-7: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-008-7655
Rod End Connector

270087655
DR-01102-0101: RNCC: 2 | RNVC: 1

11 Jan 2001

5340-27-006-9008
Mounting Bracket

270069008
A 436 670 01 23: RNCC: 2 | RNVC: 1

22 Jun 1999

5340-27-021-4085
Mounting Bracket

270214085
1009.1KI.0306-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-7535
Mounting Bracket

270207535
1009.1KI.0339-7: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-4115
Mounting Bracket

270214115
1009.1KI.0002-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3628
Mending Plate

270173628
1009.1IS.0058-26: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-019-9123
Angle Bracket

270199123
RRC3763-L: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-0353
Mounting Bracket

270210353
1009.1KI.0236-1*2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-9666
Mending Plate

270489666
103707: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-045-5177
Bridge Clamp

270455177
6C1145B484DD: RNCC: 2 | RNVC: 1

12 May 2009

5340-27-056-8704
Mending Plate

270568704
203250: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-017-3622
Mending Plate

270173622
1009.1IS.0047-4: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-007-3629
Retaining Clip

270073629
W 702623 S300: RNCC: 2 | RNVC: 1

26 Oct 1999

5340-27-017-3659
Mending Plate

270173659
1009.1IS.0087-9: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-027-3663
Angle Bracket

270273663
1.HIBM-1Q-676D01: RNCC: 2 | RNVC: 1

28 Sep 2005

5340-27-036-9463
Mending Plate

270369463
C77AK56: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-025-4426
Lock Key

270254426
NAS559-3: RNCC: 2 | RNVC: 1

17 Mar 2005

5340-27-053-4741
Mounting Bracket

270534741
H233125900: RNCC: 2 | RNVC: 1

10 May 2011

5340-27-057-6518
Butt Hinge

270576518
TT070496: RNCC: 2 | RNVC: 1

18 Sep 2012

5340-27-059-4468
Cover Strip

270594468
M576D251220000: RNCC: 2 | RNVC: 1

6 Aug 2013

5340-27-021-0323
Mounting Bracket

270210323
1009.1KI.0100-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-004-5129
Access Cover

270045129
10121YK5347: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-035-0080
Mounting Bracket

270350080
13C00-23070-AA: RNCC: 2 | RNVC: 1

21 Feb 2007

5340-27-007-1701
Retaining Clip

270071701
E 860397 S102: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-054-3906
Mounting Bracket

270543906
55RS650831: RNCC: 2 | RNVC: 1

5 Sep 2011

5340-27-020-7564
Mounting Bracket

270207564
1009.1KI.0079-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-018-4211
Mending Plate

270184211
209-064-809-149: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-8063
Mending Plate

270188063
406064-0000: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-2712
Loop Clamp

270482712
13H7343-L: RNCC: 3 | RNVC: 2

22 Jan 2010

5340-27-054-6775
Mending Plate

270546775
13599-2: RNCC: 3 | RNVC: 2

6 Oct 2011

5340-27-050-0571
Mending Plate

270500571
102832: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-017-9275
Mechanical Stop

270179275
901-LS-12: RNCC: 2 | RNVC: 1

10 Oct 2003

5340-27-017-0352
Angle Bracket

270170352
98003343: RNCC: 2 | RNVC: 1

2 May 2003

5340-27-034-9864
Mounting Bracket

270349864
1.HIBM-1I-2306D43: RNCC: 2 | RNVC: 1

20 Feb 2007

5340-27-015-7218
Flush Lock

270157218
10091KI0127: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-021-6483
Loop Clamp

270216483
KELEPCE 1 1/2: RNCC: 2 | RNVC: 1

22 Dec 2003

5340-27-028-1704
Mounting Bracket

270281704
72A04-72173-AA: RNCC: 2 | RNVC: 1

8 Dec 2005

5340-27-001-7588
Loop Clamp

270017588
TM55-1520-210-3EAB700 D12: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-022-7543
Mounting Bracket

270227543
1010FG-0000799: RNCC: 2 | RNVC: 1

16 Apr 2004

5340-27-020-7545
Mending Plate

270207545
1009.1KI.0229-10: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-4623
Pin Removable Head

270074623
99-59/A: RNCC: 2 | RNVC: 1

24 Nov 1999

5340-27-013-6712
Escutcheon Plate

270136712
WC-38X232-DOG.OK-R.S: RNCC: 2 | RNVC: 1
KUMRU 2048.WC: RNCC: 2 | RNVC: 1
WC KAPI KOLU 38X232MM: RNCC: 2 | RNVC: 1
KUMRU 2048.WC: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-27-059-1344
Metal Grille

270591344
CNR-AL01: RNCC: 5 | RNVC: 9

3 Jun 2013

5340-27-056-2248
Mending Plate

270562248
D8056-1104986: RNCC: 2 | RNVC: 2

1 Mar 2012

5340-27-021-4297
Mounting Bracket

270214297
1010FK-2811754: RNCC: 2 | RNVC: 1
1010FK2811754: RNCC: 2 | RNVC: 1
1010FK-2811754: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-0230
Mounting Bracket

270480230
140100085: RNCC: 3 | RNVC: 2
140100085: RNCC: 5 | RNVC: 9

29 Dec 2009

5340-27-058-2731
Mending Plate

270582731
MM-7490-0078: RNCC: 2 | RNVC: 1

2 Jan 2013

5340-27-059-6576
Loop Clamp

270596576
901-KL-359: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-017-4161
Tee Hinge

270174161
1.HIBM-1V-979 D60: RNCC: 2 | RNVC: 1

20 Jun 2003

5340-27-016-9319
Loop Clamp

270169319
51.97440.0149: RNCC: 2 | RNVC: 1
20737T: RNCC: 2 | RNVC: 1

11 Apr 2003

5340-27-058-8723
Access Cover

270588723
VOE12737238: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-27-052-7288
Mending Plate

270527288
10046607: RNCC: 2 | RNVC: 1

18 Feb 2011

5340-27-043-9386
Bail Handle

270439386
SANDIK KULBU: RNCC: 2 | RNVC: 1
5340KK30800: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-027-9709
Mending Plate

270279709
7789116: RNCC: 2 | RNVC: 1

22 Nov 2005

5340-27-005-6091
Angle Bracket

270056091
92VB-B11249-BA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-058-8069
Butt Hinge

270588069
354.01.740: RNCC: 5 | RNVC: 9

5 Apr 2013

5340-27-057-2565
Bridge Clamp

270572565
6C1Q9L535AD: RNCC: 3 | RNVC: 2

11 Jul 2012

5340-27-016-3431
Mechanical Stop

270163431
P069: RNCC: 2 | RNVC: 1

3 Jan 2003

5340-27-049-0973
Catch Strike

270490973
7705029032: RNCC: 3 | RNVC: 2

1 Apr 2010

5340-27-005-1708
Access Cover

270051708
1010001552: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-003-9206
Webbing Strap

270039206
07001MN0665: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-015-7217
Flush Lock

270157217
10091KI0125: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-020-7863
Mending Plate

270207863
1009.1KI.0131-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-025-3455
Recess Handle

270253455
2ABM 1MK 0044: RNCC: 2 | RNVC: 1

28 Feb 2005

5340-27-053-0667
Mending Plate

270530667
371X872 MM: RNCC: 2 | RNVC: 1

23 Mar 2011

5340-27-012-5726
Access Cover

270125726
15106002: RNCC: 2 | RNVC: 1
15400601004: RNCC: 3 | RNVC: 1
15400601004: RNCC: 3 | RNVC: 1

12 Feb 2002

5340-27-059-3367
Access Cover

270593367
10072149: RNCC: 2 | RNVC: 1

17 Jul 2013

5340-27-021-4316
Mounting Bracket

270214316
1012.1HSCA.03-15: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-9380
Plug Button

270059380
E852082 S: RNCC: 2 | RNVC: 1

6 Mar 1998

5340-27-052-8039
Mending Plate

270528039
99 2A 101 04R: RNCC: 2 | RNVC: 2

25 Feb 2011

5340-27-008-2957
Mounting Bracket

270082957
10451090: RNCC: 2 | RNVC: 1

12 Sep 2000

5340-27-007-2118
Mounting Bracket

270072118
E 890227 S: RNCC: 2 | RNVC: 1

27 Sep 1999

5340-27-055-7257
Flush Catch

270557257
599943: RNCC: 2 | RNVC: 2

30 Dec 2011

5340-27-056-8628
Mending Plate

270568628
202601: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-006-9186
Mounting Bracket

270069186
P91AG F46686 AA: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-017-3690
Pad Eye

270173690
1009.1IS.0043-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-046-4546
Mounting Bracket

270464546
1.HIBM-1Q-972: RNCC: 2 | RNVC: 1

12 Aug 2009

5340-27-025-4039
Loop Clamp

270254039
EAB700-4: RNCC: 2 | RNVC: 1

11 Mar 2005

5340-27-006-9338
Retaining Strap

270069338
5K60384: RNCC: 2 | RNVC: 1
9073462: RNCC: 2 | RNVC: 1

28 Jun 1999

5340-27-058-8727
Access Cover

270588727
VOE12739485: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-27-054-0211
Access Cover

270540211
H234104302: RNCC: 2 | RNVC: 1

15 Jul 2011

5340-27-005-1601
Detent Plunger

270051601
1010001525: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-021-2369
Butt Hinge

270212369
10131MM0050: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-8604
Loop Clamp

270228604
MS21919D44: RNCC: 2 | RNVC: 1

29 Apr 2004

5340-27-058-2228
Tee Hinge

270582228
200748: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-033-6490
Handle Grip

270336490
40-205-3678: RNCC: 2 | RNVC: 1
40-205-3678: RNCC: 2 | RNVC: 1

8 Nov 2006

5340-27-040-7316
Mounting Bracket

270407316
1.HIBM-1I-2716: RNCC: 2 | RNVC: 1

11 Mar 2008

5340-27-049-1690
Mounting Bracket

270491690
S01 001 0001 1650 014 F 02.K: RNCC: 2 | RNVC: 1

9 Apr 2010

5340-27-013-6056
Mending Plate

270136056
4192598-1: RNCC: 2 | RNVC: 1

2 Jul 2002

5340-27-007-1518
Strap End Clip

270071518
A 435 790 75 96: RNCC: 2 | RNVC: 1

8 Sep 1999

5340-27-021-0745
Flush Catch

270210745
1009.1KI.0101-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-024-1308
Angle Bracket

270241308
F-1564: RNCC: 2 | RNVC: 1

21 Sep 2004

5340-27-023-3890
Mending Plate

270233890
4.04.02.10: RNCC: 2 | RNVC: 1
1934071109: RNCC: 2 | RNVC: 1

25 Jun 2004

5340-27-023-9075
Bridge Clamp

270239075
4.05.16.02: RNCC: 2 | RNVC: 1
1934130103: RNCC: 2 | RNVC: 1

19 Aug 2004

5340-27-053-6882
Mending Plate

270536882
C172-A00020: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-27-025-2349
Mounting Bracket

270252349
205-030-515-1: RNCC: 2 | RNVC: 1

4 Feb 2005

5340-27-054-1552
Loop Holder

270541552
40-004.00/10-127: RNCC: 2 | RNVC: 1

2 Aug 2011

5340-27-007-6908
Fusible Plug

270076908
6009-0517-5013: RNCC: 2 | RNVC: 1
6009-0517-5013: RNCC: 2 | RNVC: 1

19 Jan 2000

5340-27-052-5558
Lock-Release Lever

270525558
AA1730-1251-6A: RNCC: 2 | RNVC: 1

7 Feb 2011

5340-27-021-4113
Mounting Bracket

270214113
1009.1KI.0016-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-3542
Strapping Seal

270223542
H-39-4649-50: RNCC: 2 | RNVC: 1

22 Feb 2004

5340-27-046-4548
Mounting Bracket

270464548
1.HIBM-1Q-980: RNCC: 2 | RNVC: 1

12 Aug 2009

5340-27-055-4833
Padlock

270554833
AA59487-1: RNCC: 2 | RNVC: 2

7 Dec 2011

5340-27-059-7879
Mounting Bracket

270597879
SGB-DKP-M-4-0001: RNCC: 2 | RNVC: 1

6 Nov 2013

5340-27-022-8198
Mounting Bracket

270228198
24940: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-021-4026
Mounting Bracket

270214026
1012.1HSCA.09-05: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-6881
Arched Cushion

270546881
98019084: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-044-7091
Turnbuckle

270447091
KEW01010-109: RNCC: 2 | RNVC: 1

5 Mar 2009

5340-27-053-3599
Strap Fastener Loop

270533599
44BMK0123: RNCC: 2 | RNVC: 1

22 Apr 2011

5340-27-016-2875
Strap Fastener Loop

270162875
831527HL0000231: RNCC: 2 | RNVC: 1
KEMER TOKASI: RNCC: 2 | RNVC: 1

22 May 2002

5340-27-054-3021
Arched Cushion

270543021
98020373: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-017-4207
Corner Brace

270174207
EIBM-AA5-826: RNCC: 2 | RNVC: 1

20 Jun 2003

5340-27-020-2760
Strap Fastener Loop

270202760
1010007367: RNCC: 2 | RNVC: 1

21 Nov 2003

5340-27-048-9612
Mending Plate

270489612
102826: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-050-9059
Catch Strike

270509059
13C35-56170-AA: RNCC: 2 | RNVC: 1

14 Sep 2010

5340-27-017-4462
Mending Plate

270174462
10131YT0166: RNCC: 2 | RNVC: 1

25 Jun 2003

5340-27-041-9114
Strap Fastener Loop

270419114
901-SK-179: RNCC: 2 | RNVC: 1

1 Jul 2008

5340-27-054-3652
Arched Cushion

270543652
98021611: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-017-4222
Corner Brace

270174222
EIBM-AA4-409-L: RNCC: 2 | RNVC: 1

20 Jun 2003

5340-27-054-4428
Arched Cushion

270544428
98023018: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-27-009-5955
Metal Grille

270095955
007001YD0214: RNCC: 2 | RNVC: 1

31 Jul 2001

5340-27-056-3533
Caster Wheel

270563533
ZKZ100X25: RNCC: 2 | RNVC: 1

16 Mar 2012

5340-27-017-3812
Access Cover

270173812
1009.1IS.0060-1D: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-023-1481
Expansion Plug

270231481
7521889: RNCC: 2 | RNVC: 1
10121YT5647: RNCC: 2 | RNVC: 1

1 Jun 2004

5340-27-050-5107
Bridge Clamp

270505107
DIN-3015-L-KP-5-G-38-PA: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-034-7314
Mounting Bracket

270347314
514B62: RNCC: 2 | RNVC: 1

5 Feb 2007

5340-27-012-6875
Mounting Bracket

270126875
98011133: RNCC: 2 | RNVC: 1

5 Mar 2002

5340-27-057-1876
Butt Hinge

270571876
13C44-57294-AA: RNCC: 2 | RNVC: 1

29 Jun 2012

5340-27-023-1836
Access Cover

270231836
98012579-8: RNCC: 2 | RNVC: 1

3 Jun 2004

5340-27-018-4307
Flush Catch Claw

270184307
3011R30200029: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-3327
Mounting Bracket

270403327
11591023: RNCC: 2 | RNVC: 1

18 Jan 2008

5340-27-040-2559
Mending Plate

270402559
8200298158: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-034-7838
Mending Plate

270347838
13233440: RNCC: 2 | RNVC: 1

8 Feb 2007

5340-27-033-8513
Mounting Bracket

270338513
12B17-15008-AB: RNCC: 2 | RNVC: 1

23 Nov 2006

5340-27-057-4263
Mounting Bracket

270574263
024200080300: RNCC: 2 | RNVC: 1

7 Aug 2012

5340-27-027-9559
Angle Bracket

270279559
6040-4038-1002: RNCC: 2 | RNVC: 1

21 Nov 2005

5340-27-028-8347
Mounting Bracket

270288347
71B22-66009-AB: RNCC: 2 | RNVC: 1

10 Feb 2006

5340-27-055-2186
Mounting Bracket

270552186
1692-0164: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-017-9872
Kick Door Plate

270179872
4207534: RNCC: 2 | RNVC: 1

21 Oct 2003

5340-27-049-4926
Mending Plate

270494926
107511: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-048-6911
Bail Handle

270486911
6556-06: RNCC: 2 | RNVC: 1
6556-06: RNCC: 5 | RNVC: 9

19 Feb 2010

5340-27-053-9623
Mounting Bracket

270539623
72A21-30555-AA: RNCC: 2 | RNVC: 1

12 Jul 2011

5340-27-056-7073
Mounting Bracket

270567073
ADOP-SHELTER-180-KTU: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-028-7787
Mounting Bracket

270287787
884-5810-920: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-022-1881
Bow Handle

270221881
16HY1-304100-16: RNCC: 2 | RNVC: 1

17 Feb 2004

5340-27-028-1634
Mounting Bracket

270281634
72A58-70070-AA: RNCC: 2 | RNVC: 1

8 Dec 2005

5340-27-029-6744
Mending Plate

270296744
5PS-24792-00-00: RNCC: 5 | RNVC: 9

1 May 2006

5340-27-059-6834
Loop Clamp

270596834
901-KL-400: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-055-0151
Butt Hinge

270550151
72A99-52020-AA: RNCC: 2 | RNVC: 1

28 Oct 2011

5340-27-024-2771
Mounting Bracket

270242771
73-3579-2369: RNCC: 2 | RNVC: 1

7 Oct 2004

5340-27-028-0751
Mounting Bracket

270280751
72B15-60316-AA: RNCC: 2 | RNVC: 1

29 Nov 2005

5340-27-028-7792
Mounting Bracket

270287792
884-5810-932: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-013-2533
Support Hook

270132533
ASKI 150: RNCC: 2 | RNVC: 1
KANCA-150: RNCC: 2 | RNVC: 1
180069: RNCC: 2 | RNVC: 1
180069 S: RNCC: 2 | RNVC: 1
ASKI 150: RNCC: 2 | RNVC: 1

22 May 2002

5340-27-055-3254
Mounting Bracket

270553254
1692-0113: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-27-055-3378
Mounting Bracket

270553378
1692-0028: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-022-3966
Catch Strike

270223966
9BM 5340-00072: RNCC: 2 | RNVC: 1

5 Mar 2004

5340-27-054-0609
Bridge Clamp

270540609
DIN-3017-A-16-27X9-W3: RNCC: 2 | RNVC: 2

20 Jul 2011

5340-27-008-3269
Mounting Bracket

270083269
83/13 - 11: RNCC: 2 | RNVC: 1

18 Sep 2000

5340-27-054-2107
Utility Access Door

270542107
RC-345A: RNCC: 5 | RNVC: 9

9 Aug 2011

5340-27-028-7775
Mounting Bracket

270287775
884-5800-990: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-054-0267
Mounting Bracket

270540267
55RS252166: RNCC: 2 | RNVC: 1

18 Jul 2011

5340-27-052-9303
Mounting Bracket

270529303
77 05 008 035: RNCC: 3 | RNVC: 2

8 Mar 2011

5340-27-050-0569
Mending Plate

270500569
102831: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-006-9508
Mounting Bracket

270069508
95AT A26698 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-056-3435
Access Cover

270563435
3831770: RNCC: 2 | RNVC: 2

15 Mar 2012

5340-27-021-4065
Mounting Bracket

270214065
1009.1KI.0321-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-052-3084
Mending Plate

270523084
103064: RNCC: 3 | RNVC: 2

4 Jan 2011

5340-27-025-7615
Catch Strike

270257615
81350B: RNCC: 2 | RNVC: 1

6 Apr 2005

5340-27-051-4122
Mending Plate

270514122
108031: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-044-9200
Bow Handle

270449200
02008-TRS-10-0200-05: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-27-017-3878
Mounting Bracket

270173878
1009.1IS.0060-1E: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-054-6596
Mounting Bracket

270546596
3L40440: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-041-3643
Utility Access Door

270413643
103X206 CM AL: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-038-6255
Mending Plate

270386255
83A03-55448-AA: RNCC: 2 | RNVC: 1

23 Oct 2007

5340-27-048-9672
Mending Plate

270489672
103722: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-050-1558
Mending Plate

270501558
107409: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-037-5439
Expansion Plug

270375439
13254-58000: RNCC: 5 | RNVC: 9

6 Aug 2007

5340-27-004-5109
Access Cover

270045109
10121YK5091: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-008-0561
Handle Grip

270080561
27748: RNCC: 2 | RNVC: 1

15 Jun 2000

5340-27-034-6110
Mounting Bracket

270346110
518A06: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-046-2726
Catch Strike

270462726
8200452519: RNCC: 2 | RNVC: 1

27 Jul 2009

5340-27-044-2126
Mounting Bracket

270442126
12E00-70005-AA: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-015-0437
Loop Clamp

270150437
7997203: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-0395
Loop Clamp

270150395
7403917: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-056-0434
Loop Clamp

270560434
N07/7010908: RNCC: 2 | RNVC: 1

30 Jan 2012

5340-27-037-8274
Mounting Bracket

270378274
73A04-35214-AA: RNCC: 2 | RNVC: 1

28 Aug 2007

5340-27-022-5767
Snap Hook

270225767
MT-626: RNCC: 2 | RNVC: 1

29 Jul 2005

5340-27-044-4069
Synchro Clamp

270444069
81.06140-0174: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-050-8478
Access Cover

270508478
6H3-24452-10: RNCC: 3 | RNVC: 2
6H3-24452-10: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-041-8561
Mounting Bracket

270418561
901-TA-324: RNCC: 2 | RNVC: 1

25 Jun 2008

5340-27-012-7656
Eye Hook

270127656
332A584593-20: RNCC: 2 | RNVC: 1

12 Mar 2002

5340-27-005-4539
Retaining Strap

270054539
K5A-5026: RNCC: 3 | RNVC: 2

3 Dec 1997

5340-27-011-4734
Mounting Bracket

270114734
99999-NIIN-DA0153212: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-042-1014
Butt Hinge

270421014
MNT SR OKK-01: RNCC: 2 | RNVC: 1

18 Jul 2008

5340-27-017-3807
Access Cover

270173807
1009.1IS.0072-4: RNCC: 2 | RNVC: 1
10091IS0052: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-048-1812
Mounting Bracket

270481812
377775406001: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-27-052-8040
Mending Plate

270528040
99 2A 101 05R: RNCC: 2 | RNVC: 2

25 Feb 2011

5340-27-035-5892
Mending Plate

270355892
72B04-61423-AA: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-024-1227
Swivel Caster

270241227
0959: RNCC: 2 | RNVC: 1
05001DT0042: RNCC: 5 | RNVC: 9

21 Sep 2004

5340-27-058-2157
Mending Plate

270582157
24818-ZW5-U01: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-041-3765
Rod End Clevis

270413765
G-71-9/14: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-001-2927
Loop Clamp

270012927
205-030-009-089: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-044-6910
Bow Handle

270446910
81.61141-0000: RNCC: 3 | RNVC: 2

4 Mar 2009

5340-27-049-0542
Mounting Bracket

270490542
1304-007: RNCC: 3 | RNVC: 2

30 Mar 2010

5340-27-026-6255
Angle Bracket

270266255
901-MK-133-C: RNCC: 2 | RNVC: 1

14 Jul 2005

5340-27-022-9539
Rod End Connector

270229539
05001FC0011: RNCC: 2 | RNVC: 1

7 May 2004

5340-27-051-4809
Mounting Bracket

270514809
400266-007: RNCC: 3 | RNVC: 2

1 Nov 2010

5340-27-013-1113
Loop Clamp

270131113
81.97401.0818: RNCC: 2 | RNVC: 1
28789T: RNCC: 2 | RNVC: 1
90464-08189-00: RNCC: 2 | RNVC: 1

26 Apr 2002

5340-27-020-7870
Mending Plate

270207870
1009.1KI.0129-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-047-4053
Mounting Bracket

270474053
13C02-08813-AA: RNCC: 3 | RNVC: 2

1 Dec 2009

5340-27-021-1937
Mending Plate

270211937
1010FG-0000316: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-0342
Bail Handle

270210342
1009.1KI.0308-5*2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-036-2379
Sliding Door Track

270362379
3C46E51272HC: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-024-2273
Bail Handle

270242273
C.046: RNCC: 2 | RNVC: 1

2 Oct 2004

5340-27-045-4563
Lock-Release Lever

270454563
1.HIBM-1I-2792: RNCC: 2 | RNVC: 1

11 May 2009

5340-27-017-2229
Mounting Bracket

270172229
ME-01-0057-50: RNCC: 2 | RNVC: 1

29 May 2003

5340-27-011-2433
Butt Hinge

270112433
07002YM0305: RNCC: 2 | RNVC: 1
6 CM: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-021-9692
Mounting Bracket

270219692
1009 1AD 0009/1-2: RNCC: 2 | RNVC: 1

16 Jan 2004

5340-27-020-7557
Mending Plate

270207557
1009.1KI.0177-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-7734
Access Cover

270227734
06148-2: RNCC: 2 | RNVC: 1
5049935: RNCC: 2 | RNVC: 1

17 Apr 2004

5340-27-025-6708
Mounting Bracket

270256708
1010FG-2201541-1: RNCC: 2 | RNVC: 1

28 Mar 2005

5340-27-021-6485
Loop Clamp

270216485
KELEPCE 1 1/4: RNCC: 2 | RNVC: 1
KELEPCE 1.1/4: RNCC: 5 | RNVC: 9

22 Dec 2003

5340-27-007-1519
Strap End Clip

270071519
A 435 790 76 96: RNCC: 2 | RNVC: 1

8 Sep 1999

5340-27-019-9288
Angle Bracket

270199288
MRC9438-L: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-020-7530
Mounting Bracket

270207530
1009.1KI.0117-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-4093
Mounting Bracket

270214093
1009.1KI.0302/1-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-0347
Mounting Bracket

270210347
1009.1KI.0353-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-7540
Mounting Bracket

270207540
1009.1KI.0245-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-3489
Mounting Bracket

270213489
1009.1KI.0330-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-1109
Mounting Bracket

270281109
2.HIBM-95-0146: RNCC: 2 | RNVC: 1

2 Dec 2005

5340-27-024-7759
Catch Strike

270247759
71B21-55511-AB: RNCC: 2 | RNVC: 1

2 Dec 2004

5340-27-018-3435
Mounting Bracket

270183435
820744-1: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-036-2381
Sliding Door Track

270362381
3C46E51272EC: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-055-1434
Utility Access Door

270551434
UG 009000 POZ-20: RNCC: 2 | RNVC: 1
UG 009000 POZ-20: RNCC: 3 | RNVC: 2

16 Nov 2011

5340-27-013-3921
Bow Handle

270133921
7700659425: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-054-3020
Arched Cushion

270543020
98020372: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-054-7092
Strap Fastener Loop

270547092
2.HIBM-3G-439/4: RNCC: 2 | RNVC: 1

10 Oct 2011

5340-27-023-5113
Strap Fastener Loop

270235113
05001FT0070: RNCC: 2 | RNVC: 1

8 Jul 2004

5340-27-054-3650
Arched Cushion

270543650
98021595: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-020-2647
Strap Fastener Loop

270202647
1010007420: RNCC: 2 | RNVC: 1

20 Nov 2003

5340-27-011-8633
Strap Fastener Loop

270118633
MT-626: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-022-0902
Strap Fastener Loop

270220902
1009 1YD 0325: RNCC: 2 | RNVC: 1

9 Feb 2004

5340-27-044-1018
Turnbuckle

270441018
250-03-04: RNCC: 2 | RNVC: 1

7 Jan 2009

5340-27-051-7302
Strap Fastener Loop

270517302
KK0036375: RNCC: 2 | RNVC: 1

24 Nov 2010

5340-27-053-9088
Strap Fastener Loop

270539088
D-5MM-39MM: RNCC: 2 | RNVC: 1

6 Jul 2011

5340-27-054-3654
Arched Cushion

270543654
98021613: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-005-1710
Access Cover

270051710
1010001676: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-054-6082
Mounting Bracket

270546082
98016817: RNCC: 2 | RNVC: 2

30 Sep 2011

5340-27-022-0768
Mending Plate

270220768
1009 1YD 0332: RNCC: 2 | RNVC: 1

6 Feb 2004

5340-27-028-9083
Loop Clamp

270289083
71A72-73227-AA: RNCC: 2 | RNVC: 1

15 Feb 2006

5340-27-043-4939
Mounting Bracket

270434939
052649K: RNCC: 2 | RNVC: 1

14 Nov 2008

5340-27-059-6459
Strap Fastener Loop

270596459
05001FT0399: RNCC: 2 | RNVC: 1

23 Sep 2013

5340-27-040-4140
Crank Handle

270404140
8364265: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-035-3217
Mounting Bracket

270353217
3C461614AA: RNCC: 2 | RNVC: 1

8 Mar 2007

5340-27-014-3940
Bridge Clamp

270143940
2K88653: RNCC: 2 | RNVC: 1

10 Oct 2002

5340-27-027-4893
Mounting Bracket

270274893
71A00-72063-AA: RNCC: 2 | RNVC: 1

6 Oct 2005

5340-27-019-7213
Mounting Bracket

270197213
N6011109BH: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-7806
Access Cover

270587806
VOE12744980: RNCC: 3 | RNVC: 2

2 Apr 2013

5340-27-021-2370
Butt Hinge

270212370
10131MM0051: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-014-9833
Mortise Lock

270149833
10091YK0298: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-013-0975
Angle Bracket

270130975
81.97488.0162: RNCC: 2 | RNVC: 1

25 Apr 2002

5340-27-048-2277
Mounting Bracket

270482277
51RS930046: RNCC: 2 | RNVC: 1

21 Jan 2010

5340-27-013-5334
Catch Strike

270135334
81.66912.5203: RNCC: 2 | RNVC: 1

26 Jun 2002

5340-27-022-1758
Handle Grip

270221758
13UT1-211100.02: RNCC: 2 | RNVC: 1

17 Feb 2004

5340-27-019-5316
Angle Bracket

270195316
07002YK1156: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-041-3731
Flush Lock

270413731
16001DK0038: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-012-8662
Lock Key

270128662
81.41336.0162: RNCC: 2 | RNVC: 1

28 Mar 2002

5340-27-050-0585
Mending Plate

270500585
102876: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-022-8978
Mounting Bracket

270228978
KMS 0041: RNCC: 2 | RNVC: 1

1 May 2004

5340-27-059-7802
Mending Plate

270597802
98022962: RNCC: 2 | RNVC: 1

4 Nov 2013

5340-27-010-1435
Mounting Bracket

270101435
98010065: RNCC: 2 | RNVC: 1

8 Nov 2001

5340-27-051-1074
Mending Plate

270511074
103055: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-007-4109
Mounting Bracket

270074109
95AG 3439 AE: RNCC: 2 | RNVC: 1

4 Nov 1999

5340-27-016-9322
Loop Clamp

270169322
51.97401.0390: RNCC: 2 | RNVC: 1

11 Apr 2003

5340-27-015-0363
Loop Clamp

270150363
7260846: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-017-0101
Rod End Clevis

270170101
10131YCS0128: RNCC: 2 | RNVC: 1

29 Apr 2003

5340-27-051-2601
Mounting Bracket

270512601
55RS060075: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-27-057-2686
Loop Clamp

270572686
13C44-80781-AA: RNCC: 2 | RNVC: 1

11 Jul 2012

5340-27-044-2083
Mounting Bracket

270442083
12E00-70295-AA: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-041-3449
Mounting Bracket

270413449
GU1S30009CGLT: RNCC: 2 | RNVC: 1

15 May 2008

5340-27-015-0353
Loop Clamp

270150353
7057336: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-052-8036
Mending Plate

270528036
99 2A 100 39R: RNCC: 2 | RNVC: 2

25 Feb 2011

5340-27-046-0519
Catch Strike

270460519
RRC3979: RNCC: 2 | RNVC: 1

2 Jul 2009

5340-27-005-1602
Detent Plunger

270051602
1010001650: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-054-6666
Mounting Bracket

270546666
55RS753008: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-051-7420
Mending Plate

270517420
1177098: RNCC: 3 | RNVC: 2

24 Nov 2010

5340-27-028-4474
Bridge Clamp

270284474
7731082: RNCC: 2 | RNVC: 1

2 Jan 2006

5340-27-043-0034
Mounting Bracket

270430034
40.626.0110: RNCC: 2 | RNVC: 1
40.626.0110: RNCC: 2 | RNVC: 1

24 Sep 2008

5340-27-004-3225
Eye Hook

270043225
05001YD0054: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-038-1531
Mounting Bracket

270381531
1010FK-2702125: RNCC: 2 | RNVC: 1

18 Sep 2007

5340-27-051-1139
Bow Handle

270511139
101831: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-054-6867
Mounting Bracket

270546867
98021564: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-049-7094
Mending Plate

270497094
K04659053: RNCC: 3 | RNVC: 2

24 May 2010

5340-27-049-1647
Mounting Bracket

270491647
S01 001 0001 1650 014 F 02.D: RNCC: 2 | RNVC: 1

8 Apr 2010

5340-27-021-0458
Mounting Bracket

270210458
1009.1KI.0171-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-0149
Mechanical Stop

270210149
1009.1KI.0107-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-012-8621
Angle Bracket

270128621
98012717: RNCC: 2 | RNVC: 1

28 Mar 2002

5340-27-034-1168
Mounting Bracket

270341168
0000GK0136793: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-008-9035
Mounting Bracket

270089035
98000561: RNCC: 2 | RNVC: 1

14 Feb 2001

5340-27-025-1678
Mounting Bracket

270251678
10131YB0858: RNCC: 2 | RNVC: 1

24 Jan 2005

5340-27-021-5473
Bridge Clamp

270215473
10131YK1324: RNCC: 2 | RNVC: 1

16 Dec 2003

5340-27-018-6693
Mounting Bracket

270186693
1010FK-2703509: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-026-1998
Mending Plate

270261998
2010 5655.005: RNCC: 2 | RNVC: 1

16 Jun 2005

5340-27-059-9485
Mounting Bracket

270599485
1010FMA-1811357: RNCC: 2 | RNVC: 1

11 Dec 2013

5340-27-056-4626
Mending Plate

270564626
203227: RNCC: 2 | RNVC: 2

2 Apr 2012

5340-27-029-5879
Mending Plate

270295879
923.892.4: RNCC: 2 | RNVC: 1

17 Apr 2006

5340-27-056-8782
Mending Plate

270568782
203430: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-025-0164
Mounting Bracket

270250164
1009 1YS 1193: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-055-9171
Lock Bolt

270559171
KILIT,KASA: RNCC: 2 | RNVC: 2

13 Jan 2012

5340-27-001-8057
Mounting Plate

270018057
TM55-1520-210-2205-075-229-001: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-016-9678
Angle Bracket

270169678
M01-0102-50: RNCC: 2 | RNVC: 1

24 Apr 2003

5340-27-025-3966
Mounting Bracket

270253966
C20A98: RNCC: 2 | RNVC: 1

11 Mar 2005

5340-27-003-9188
Angle Bracket

270039188
07001MN0421: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-006-9164
Mounting Bracket

270069164
91AG 9C818 AB: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-009-6465
Mounting Bracket

270096465
5142 25: RNCC: 2 | RNVC: 1

9 Aug 2001

5340-27-012-1438
Mounting Bracket

270121438
10131YS0846: RNCC: 2 | RNVC: 1

16 Jan 2002

5340-27-010-5114
Webbing Strap

270105114
05001HK0158: RNCC: 2 | RNVC: 1
30X1.7MM: RNCC: 2 | RNVC: 1
30X1.7 MM: RNCC: 2 | RNVC: 1

28 Nov 2001

5340-27-058-6182
Access Cover

270586182
VOE12744902: RNCC: 3 | RNVC: 2
VOE12744902: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-27-008-1303
Handle Grip

270081303
5337: RNCC: 2 | RNVC: 1

20 Jul 2000

5340-27-021-1043
Access Cover

270211043
1010FK-3512803: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-040-4324
Mounting Bracket

270404324
8346047: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-054-0268
Mounting Bracket

270540268
55RS351094: RNCC: 2 | RNVC: 1

18 Jul 2011

5340-27-009-6110
Mounting Bracket

270096110
4289497: RNCC: 2 | RNVC: 1

3 Aug 2001

5340-27-019-2637
Handle Grip

270192637
10131YT0101: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-011-0540
Access Cover

270110540
7115311234: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-021-8150
Loop Holder

270218150
10131YC2001: RNCC: 2 | RNVC: 1

30 Dec 2003

5340-27-051-0304
Access Cover

270510304
125614: RNCC: 3 | RNVC: 2

27 Sep 2010

5340-27-048-8329
Sliding Door Track

270488329
893367929351: RNCC: 2 | RNVC: 1

8 Mar 2010

5340-27-021-0346
Bail Handle

270210346
1009.1KI.0308-5*3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-040-5188
Mounting Bracket

270405188
8388991: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-047-2820
Bumper

270472820
HPT 02: RNCC: 2 | RNVC: 1
HPT 02: RNCC: 5 | RNVC: 9

18 Nov 2009

5340-27-018-3079
Mounting Bracket

270183079
10121YS5551: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-013-6322
Access Cover

270136322
P2017: RNCC: 2 | RNVC: 1

4 Jul 2002

5340-27-008-3305
Access Cover

270083305
98001060: RNCC: 2 | RNVC: 1

19 Sep 2000

5340-27-020-2106
Rod End Clevis

270202106
27485: RNCC: 2 | RNVC: 1

17 Nov 2003

5340-27-007-8711
Expansion Plug

270078711
8B83921: RNCC: 2 | RNVC: 1

6 Apr 2000

5340-27-021-7771
Mounting Bracket

270217771
1009 1YP 0226: RNCC: 2 | RNVC: 1

29 Dec 2003

5340-27-010-4999
Angle Bracket

270104999
98012416: RNCC: 2 | RNVC: 1

27 Nov 2001

5340-27-058-3002
Mending Plate

270583002
0421 5255: RNCC: 2 | RNVC: 1

7 Jan 2013

5340-27-048-1094
Handle Grip

270481094
12E00-68602-AA: RNCC: 3 | RNVC: 2

6 Jan 2010

5340-27-022-6626
Mounting Bracket

270226626
28903T: RNCC: 2 | RNVC: 1

6 Apr 2004

5340-27-023-1452
Pad Eye

270231452
2ABMK 00237: RNCC: 2 | RNVC: 1

1 Jun 2004

5340-27-056-8637
Mending Plate

270568637
203681: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-023-0757
Lock Key

270230757
150130492: RNCC: 2 | RNVC: 1
150130425: RNCC: 3 | RNVC: 1
15002603002: RNCC: 3 | RNVC: 1
15002603002: RNCC: 3 | RNVC: 1

26 May 2004

5340-27-005-3738
Brake Valve Bracket

270053738
1012-1YS-5501: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-27-019-5847
Office Machine Lock

270195847
07002YB0241: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-049-5012
Mending Plate

270495012
108071: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-019-6396
Webbing Strap

270196396
05001HK0114: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-3875
Mending Plate

270503875
105567: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-019-6329
Webbing Strap

270196329
05001HS0031: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-5389
Mounting Bracket

270505389
09013DA4930: RNCC: 2 | RNVC: 1

5 Aug 2010

5340-27-053-5253
Mounting Bracket

270535253
897585260451: RNCC: 3 | RNVC: 2

13 May 2011

5340-27-018-8460
Access Cover

270188460
269A7222: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-1564
Compression Cup

270051564
1010000573: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-052-6318
Mounting Bracket

270526318
21 51 400 41R: RNCC: 2 | RNVC: 2

10 Feb 2011

5340-27-040-7808
Bow Handle

270407808
MK565231: RNCC: 2 | RNVC: 1

18 Mar 2008

5340-27-053-0054
Rope Cleat

270530054
901-IT-26-20: RNCC: 2 | RNVC: 1

15 Mar 2011

5340-27-017-6385
Mounting Bracket

270176385
388883278001: RNCC: 2 | RNVC: 1

12 Aug 2003

5340-27-020-7579
Mounting Bracket

270207579
1009.1KI.0019-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-9684
Mending Plate

270499684
HD110191: RNCC: 2 | RNVC: 2
HD110191: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-022-7739
Mechanical Stop

270227739
2.05.03.05: RNCC: 2 | RNVC: 1
1932070321: RNCC: 2 | RNVC: 1

17 Apr 2004

5340-27-056-8692
Mending Plate

270568692
201837: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-038-7263
Mounting Bracket

270387263
10091YD0340: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-053-0134
Mounting Bracket

270530134
98AB7N625AB: RNCC: 3 | RNVC: 2

15 Mar 2011

5340-27-012-9436
Access Cover

270129436
10131YK0803: RNCC: 2 | RNVC: 1

3 Apr 2002

5340-27-055-0287
Access Cover

270550287
6111.5200: RNCC: 2 | RNVC: 1

31 Oct 2011

5340-27-021-0344
Mounting Bracket

270210344
1009.1KI.0283-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-1702
Retaining Clip

270071702
E 860398 S103: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-045-7683
T Bracket

270457683
10029205: RNCC: 2 | RNVC: 1

11 Jun 2009

5340-27-046-3069
Sliding Door Track

270463069
SURGULU KAPI MEKANIZMASI: RNCC: 2 | RNVC: 1

28 Jul 2009

5340-27-007-0189
Tee Hinge

270070189
91AB A60615 AC: RNCC: 2 | RNVC: 1

13 Jul 1999

5340-27-017-3869
Mounting Bracket

270173869
1009.1IS.0058-13: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-0457
Mounting Bracket

270210457
1009.1KI.0339-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-041-4740
Mending Plate

270414740
GU1M80028A: RNCC: 2 | RNVC: 1

27 May 2008

5340-27-017-3655
Mending Plate

270173655
1009.1IS.0083-2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-058-9199
Mounting Bracket

270589199
VOE12727896: RNCC: 3 | RNVC: 2

30 Apr 2013

5340-27-016-9438
Expansion Shield

270169438
4F4-M10A: RNCC: 2 | RNVC: 1
4F4-M10A: RNCC: 2 | RNVC: 1
4F4-M10A: RNCC: 2 | RNVC: 1

16 Apr 2003

5340-27-054-5799
Mounting Bracket

270545799
C01AR26: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-021-8639
Mounting Bracket

270218639
1009 1AD 0029: RNCC: 2 | RNVC: 1

7 Jan 2004

5340-27-021-5646
Detent Plunger

270215646
23069: RNCC: 2 | RNVC: 1

16 Dec 2003

5340-27-036-9460
Mending Plate

270369460
C77AJ45: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-016-4038
Bridge Clamp

270164038
08.04523.0001: RNCC: 2 | RNVC: 1

14 Jan 2003

5340-27-037-7102
Mending Plate

270377102
MK7510: RNCC: 2 | RNVC: 1

22 Aug 2007

5340-27-034-7328
Bow Handle

270347328
13C00-66099-AA: RNCC: 2 | RNVC: 1

5 Feb 2007

5340-27-044-7811
Mounting Bracket

270447811
6C1V14N100CC: RNCC: 2 | RNVC: 1

12 Mar 2009

5340-27-042-0770
Bow Handle

270420770
47561: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-049-5005
Mending Plate

270495005
108049: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-006-9151
Mounting Bracket

270069151
95AG A21192 AA: RNCC: 2 | RNVC: 1

24 Jun 1999

5340-27-046-5724
Utility Access Door

270465724
280X180 CM: RNCC: 2 | RNVC: 1

7 Sep 2009

5340-27-050-3857
Mending Plate

270503857
105231: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-008-0391
Mounting Bracket

270080391
8564530: RNCC: 2 | RNVC: 1

8 Jun 2000

5340-27-045-6037
Utility Access Door

270456037
210X105 CM-CELIK: RNCC: 2 | RNVC: 1

18 May 2009

5340-27-015-0359
Loop Clamp

270150359
7069871: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-0427
Loop Clamp

270150427
7755909: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-6700
Loop Clamp

270156700
05001FA0027: RNCC: 2 | RNVC: 1
42888: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-048-4069
Bow Handle

270484069
300020: RNCC: 3 | RNVC: 2

8 Feb 2010

5340-27-033-5838
Mechanical Stop

270335838
GRPEMSN: RNCC: 5 | RNVC: 9

31 Oct 2006

5340-27-054-8092
Mounting Bracket

270548092
5423363: RNCC: 2 | RNVC: 2

17 Oct 2011

5340-27-048-6861
Mending Plate

270486861
45 04 00018: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-27-025-8120
Strap Fastener Loop

270258120
8335TOKA9880016: RNCC: 2 | RNVC: 1

13 Apr 2005

5340-27-021-1493
Strap Fastener Loop

270211493
10131HT0161: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-1649
Mounting Bracket

270491649
S01 001 0001 1650 014 F 02.F: RNCC: 2 | RNVC: 1

8 Apr 2010

5340-27-054-7178
Arched Cushion

270547178
98022770: RNCC: 2 | RNVC: 2

10 Oct 2011

5340-27-053-9085
Strap Fastener Loop

270539085
D-5MM: RNCC: 2 | RNVC: 1

6 Jul 2011

5340-27-059-6770
Loop Clamp

270596770
901-KL-391: RNCC: 2 | RNVC: 1

25 Sep 2013

5340-27-024-1479
Mounting Bracket

270241479
3HD UNI 007: RNCC: 2 | RNVC: 1

22 Sep 2004

5340-27-024-4526
Rod End Clevis

270244526
10131YC0318: RNCC: 2 | RNVC: 1

28 Oct 2004

5340-27-041-2995
Mending Plate

270412995
7253206: RNCC: 2 | RNVC: 1

13 May 2008

5340-27-048-9636
Mending Plate

270489636
103666: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-045-6508
Utility Access Door

270456508
KAYAR KAPI SISTEMI: RNCC: 2 | RNVC: 1
KAYAR KAPI, 354X310CM: RNCC: 2 | RNVC: 1

26 May 2009

5340-27-044-5872
Access Cover

270445872
W705717S900: RNCC: 2 | RNVC: 1

18 Feb 2009

5340-27-040-4518
Mounting Bracket

270404518
38644: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-046-7027
Utility Access Door

270467027
3200X5400MM ALUMINYUM DOGRAMA: RNCC: 2 | RNVC: 1

1 Oct 2009

5340-27-052-1329
Strap Fastener Loop

270521329
2510ATF0104: RNCC: 2 | RNVC: 1

21 Dec 2010

5340-27-051-2596
Strap Fastener Loop

270512596
KK0112750: RNCC: 2 | RNVC: 1

13 Oct 2010

5340-27-042-7140
Strap Fastener Loop

270427140
15001MT3024: RNCC: 2 | RNVC: 1

8 Sep 2008

5340-27-019-7395
Strap Fastener Loop

270197395
H002000543490: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-025-7398
Strap Fastener Loop

270257398
8335TOKA9880010: RNCC: 2 | RNVC: 1

4 Apr 2005

5340-27-035-8982
Strap Fastener Loop

270358982
1010005864: RNCC: 2 | RNVC: 1

6 Apr 2007

5340-27-040-3864
Mounting Bracket

270403864
11615407: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-028-1701
Mounting Bracket

270281701
71B11-36090-AA: RNCC: 2 | RNVC: 1

8 Dec 2005

5340-27-053-5093
Mounting Bracket

270535093
H342735700: RNCC: 2 | RNVC: 1

12 May 2011

5340-27-014-7056
Mounting Bracket

270147056
2901461-A: RNCC: 2 | RNVC: 1

15 Nov 2002

5340-27-054-6866
Mounting Bracket

270546866
98021402: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-035-0350
Mounting Bracket

270350350
11051YS0275: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-004-7913
Bell Crank

270047913
10091YT5055: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-033-0286
Mending Plate

270330286
13D00-66250-AA: RNCC: 2 | RNVC: 1

10 Oct 2006

5340-27-016-7333
T Bracket

270167333
98000330: RNCC: 2 | RNVC: 1

6 Mar 2003

5340-27-018-1841
Rod End Clevis

270181841
6.07.02.01: RNCC: 2 | RNVC: 1

6 Nov 2003

5340-27-015-0389
Loop Clamp

270150389
7392323: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-039-6331
Mounting Bracket

270396331
YTE.190.EM.002.033: RNCC: 2 | RNVC: 1

11 Dec 2007

5340-27-019-8302
Strap Fastener Loop

270198302
05001HT0022: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-6239
Mounting Bracket

270506239
333F96: RNCC: 2 | RNVC: 1

11 Aug 2010

5340-27-047-3841
Mounting Bracket

270473841
2.HIBM-2L-652: RNCC: 2 | RNVC: 1

26 Nov 2009

5340-27-050-1905
Mounting Bracket

270501905
8812300240: RNCC: 2 | RNVC: 1

5 Jul 2010

5340-27-035-0638
Bridge Clamp

270350638
81433206052: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-038-6296
Mounting Bracket

270386296
83A18-37090-AA: RNCC: 2 | RNVC: 1

23 Oct 2007

5340-27-023-4003
Access Cover

270234003
1010FK-1806490: RNCC: 2 | RNVC: 1

26 Jun 2004

5340-27-058-2156
Mending Plate

270582156
24817-ZW5-U01: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-028-7768
Mounting Bracket

270287768
884-5800-983: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-009-4039
Access Cover

270094039
10131YK0192: RNCC: 2 | RNVC: 1

28 Jun 2001

5340-27-044-1633
Loop Clamp

270441633
43899-0000: RNCC: 2 | RNVC: 1

13 Jan 2009

5340-27-035-3938
Mending Plate

270353938
2C466845AB: RNCC: 2 | RNVC: 1

13 Mar 2007

5340-27-056-8683
Mending Plate

270568683
202605: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-018-7501
Butt Hinge

270187501
09013DM0120: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-059-7178
Mounting Bracket

270597178
1500.08.0098: RNCC: 2 | RNVC: 1

8 Oct 2013

5340-27-042-3831
Bow Handle

270423831
CARPMA KAPI KOLU: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-039-7325
Bow Handle

270397325
7019190: RNCC: 2 | RNVC: 1

17 Dec 2007

5340-27-024-8652
Webbing Strap

270248652
5002622107: RNCC: 2 | RNVC: 1

11 Dec 2004

5340-27-035-9844
Plug Button

270359844
51702571: RNCC: 2 | RNVC: 1

16 Apr 2007

5340-27-024-5720
Mounting Bracket

270245720
31214-25000: RNCC: 2 | RNVC: 1

12 Nov 2004

5340-27-044-0460
Butt Hinge

270440460
2-006-0005: RNCC: 2 | RNVC: 1
4-007-004: RNCC: 2 | RNVC: 1

30 Dec 2008

5340-27-059-3132
Mending Plate

270593132
98023009: RNCC: 2 | RNVC: 1

11 Jul 2013

5340-27-055-1465
Mending Plate

270551465
107589: RNCC: 2 | RNVC: 2

16 Nov 2011

5340-27-009-0322
Mounting Bracket

270090322
98000734: RNCC: 2 | RNVC: 1

5 Apr 2001

5340-27-058-4022
Mounting Bracket

270584022
CV71623: RNCC: 2 | RNVC: 1

23 Jan 2013

5340-27-045-8923
Utility Access Door

270458923
2800X900X70 MM: RNCC: 2 | RNVC: 1

18 Jun 2009

5340-27-054-7447
Mending Plate

270547447
203212: RNCC: 2 | RNVC: 2

12 Oct 2011

5340-27-040-4512
Mounting Bracket

270404512
42072: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-026-2943
Rod End Clevis

270262943
10131YC0334: RNCC: 2 | RNVC: 1
JCT3304AA: RNCC: 2 | RNVC: 1
10131YC0334: RNCC: 2 | RNVC: 1

27 Jun 2005

5340-27-041-3642
Utility Access Door

270413642
107X200 CM AL: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-043-6805
Butt Hinge

270436805
SOL NO:10: RNCC: 2 | RNVC: 1

2 Dec 2008

5340-27-053-9181
Mending Plate

270539181
109699: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-054-7065
Mounting Bracket

270547065
C70AA20: RNCC: 3 | RNVC: 2

10 Oct 2011

5340-27-059-7807
Mending Plate

270597807
98022984: RNCC: 2 | RNVC: 1

4 Nov 2013

5340-27-022-3178
Expansion Plug

270223178
10121YT5553: RNCC: 2 | RNVC: 1

25 Feb 2004

5340-27-015-0518
Angle Bracket

270150518
1010FK-1811642: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-050-0486
Bridge Clamp

270500486
280600020N: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-023-4420
Mechanical Stop

270234420
98013807: RNCC: 2 | RNVC: 1

30 Jun 2004

5340-27-058-9203
Mounting Bracket

270589203
VOE12730051: RNCC: 3 | RNVC: 2

30 Apr 2013

5340-27-033-6423
Mechanical Stop

270336423
40-205-2335: RNCC: 2 | RNVC: 1
40-205-2335: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-022-0904
Strap Fastener Loop

270220904
8335 KKT 000 325: RNCC: 2 | RNVC: 1

9 Feb 2004

5340-27-026-9691
Arched Cushion

270269691
MEBRAN LASTIGI: RNCC: 2 | RNVC: 1

16 Aug 2005

5340-27-059-7721
Mounting Bracket

270597721
6030-0042-1004: RNCC: 2 | RNVC: 1

1 Nov 2013

5340-27-022-0270
Mending Plate

270220270
KMS 0021-8: RNCC: 2 | RNVC: 1

26 Jan 2004

5340-27-005-1499
Loop Clamp

270051499
1010000963: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-021-8782
Mounting Bracket

270218782
KMS 0007-1: RNCC: 2 | RNVC: 1

8 Jan 2004

5340-27-007-1769
Retaining Clip

270071769
W 700748 S300: RNCC: 2 | RNVC: 1

15 Sep 1999

5340-27-017-3685
Pad Eye

270173685
1009.1IS.0027-2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-007-1706
Retaining Clip

270071706
E 860502 S101: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-026-5992
Strap Fastener Loop

270265992
05001FT0139: RNCC: 2 | RNVC: 1

14 Jul 2005

5340-27-038-7340
Strap Fastener Loop

270387340
10091MT0762: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-054-3019
Arched Cushion

270543019
98020371: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-044-0090
Mounting Bracket

270440090
5340-TJ-03324: RNCC: 2 | RNVC: 1

26 Dec 2008

5340-27-057-9908
Mounting Bracket

270579908
80106-GCF-670: RNCC: 2 | RNVC: 1

27 Nov 2012

5340-27-020-8911
Mounting Bracket

270208911
1010-1YA-0062: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-5357
Mending Plate

270215357
1010FG-0000287: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-9500
Mending Plate

270209500
1010FG-0000721: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-010-5573
Roller Holder

270105573
SBG-03/09: RNCC: 2 | RNVC: 1

3 Dec 2001

5340-27-022-5504
Mounting Bracket

270225504
6171099: RNCC: 2 | RNVC: 1
06513: RNCC: 2 | RNVC: 1

23 Mar 2004

5340-27-032-5797
Angle Bracket

270325797
40-690-9621: RNCC: 2 | RNVC: 1
40-690-9621: RNCC: 2 | RNVC: 1

11 Aug 2006

5340-27-048-7652
Mending Plate

270487652
9034-75: RNCC: 2 | RNVC: 1
9034-75: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-053-2936
Utility Access Door

270532936
H341147005: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-057-9387
Bumper

270579387
CARPMA TAMPONU: RNCC: 5 | RNVC: 9

20 Nov 2012

5340-27-046-2564
Mending Plate

270462564
M3M: RNCC: 2 | RNVC: 1

23 Jul 2009

Load More Results