What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 19 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 19 of 53

5340-27-038-2033
Mounting Bracket

270382033
1010FK-2702006: RNCC: 2 | RNVC: 1

20 Sep 2007

5340-27-042-0645
Bow Handle

270420645
7839: RNCC: 2 | RNVC: 1

15 Jul 2008

5340-27-053-9273
Bow Handle

270539273
109932: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-024-5940
Mounting Bracket

270245940
M52T3011R-557000: RNCC: 2 | RNVC: 1

13 Nov 2004

5340-27-054-6795
Mounting Bracket

270546795
58RS752943: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-050-0596
Mounting Bracket

270500596
83A19-36210-AA: RNCC: 2 | RNVC: 1

21 Jun 2010

5340-27-032-6504
Access Cover

270326504
40-765-2080: RNCC: 2 | RNVC: 1
40-765-2080: RNCC: 2 | RNVC: 1

29 Aug 2006

5340-27-053-3310
Access Cover

270533310
901-KK-238: RNCC: 2 | RNVC: 1

19 Apr 2011

5340-27-013-0050
Access Cover

270130050
98012577-8: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-058-6056
Mounting Bracket

270586056
VOE12741593: RNCC: 3 | RNVC: 2
VOE12741593: RNCC: 3 | RNVC: 2

26 Feb 2013

5340-27-043-3508
Flush Catch

270433508
74A05-62221-AA: RNCC: 2 | RNVC: 1

31 Oct 2008

5340-27-028-7599
Mounting Bracket

270287599
884-5810-948: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-036-7510
Mending Plate

270367510
15TKSUT0207: RNCC: 2 | RNVC: 1

22 Jun 2007

5340-27-059-4805
Loop Clamp

270594805
VOE952640: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-27-021-2373
Butt Hinge

270212373
10131MM0053: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-012-5644
Angle Bracket

270125644
10131YS0825: RNCC: 2 | RNVC: 1

12 Feb 2002

5340-27-053-8539
Bumper

270538539
H346068600: RNCC: 2 | RNVC: 1

28 Jun 2011

5340-27-034-7489
Bow Handle

270347489
12E50-76295-AA: RNCC: 2 | RNVC: 1

6 Feb 2007

5340-27-042-9485
Mounting Bracket

270429485
40.205.4995: RNCC: 2 | RNVC: 1
40.205.4995: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-018-2758
Mounting Bracket

270182758
3.03.02.03: RNCC: 2 | RNVC: 1

13 Nov 2003

5340-27-057-1990
Flush Catch

270571990
2.HIBM-4H-0666/7-0020: RNCC: 2 | RNVC: 1

2 Jul 2012

5340-27-059-7661
Mounting Bracket

270597661
9999-0000-0357: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-058-3792
Access Cover

270583792
33546-06900: RNCC: 5 | RNVC: 9

18 Jan 2013

5340-27-041-3762
Rod End Clevis

270413762
G-71-8/14: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-047-0268
Lock-Release Lever

270470268
73B00-57410-AA: RNCC: 2 | RNVC: 1

27 Oct 2009

5340-27-016-7425
Expansion Plug

270167425
311.504: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-013-2445
Loop Clamp

270132445
53407777700020: RNCC: 2 | RNVC: 1
KEL-63MM: RNCC: 2 | RNVC: 1
90460-57006: RNCC: 2 | RNVC: 1

20 May 2002

5340-27-024-9985
Mounting Bracket

270249985
1009 1YT 0119: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-020-7924
Elastic Strap

270207924
05005YM1417: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-018-6638
Mounting Bracket

270186638
1010FK-2702302: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-029-3822
Mounting Bracket

270293822
1.HIBM-1I-2369: RNCC: 2 | RNVC: 1

24 Mar 2006

5340-27-060-0566
Mounting Bracket

270600566
MM-7490-0346: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-038-2590
Rod End Connector

270382590
1010FK-2702262: RNCC: 2 | RNVC: 1

25 Sep 2007

5340-27-029-4014
Handle Grip

270294014
7335790974: RNCC: 2 | RNVC: 1

27 Mar 2006

5340-27-042-2170
Bow Handle

270422170
7700836145: RNCC: 2 | RNVC: 1

28 Jul 2008

5340-27-027-2569
Angle Bracket

270272569
15-01-298-001: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-021-0357
Mounting Bracket

270210357
1009.1KI.0112-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-1028
Sliding Door Track

270541028
YC15V25005BJ: RNCC: 2 | RNVC: 1

26 Jul 2011

5340-27-009-0861
Mounting Bracket

270090861
98001225-1: RNCC: 2 | RNVC: 1

26 Apr 2001

5340-27-034-9872
Mounting Bracket

270349872
1.HIBM-1I-2306D47: RNCC: 2 | RNVC: 1

20 Feb 2007

5340-27-028-1380
Catch Strike

270281380
71B21-60959-AA: RNCC: 2 | RNVC: 1

6 Dec 2005

5340-27-008-6999
Angle Bracket Set

270086999
499-046734.0: RNCC: 2 | RNVC: 1

19 Dec 2000

5340-27-047-2008
Loop Clamp

270472008
1.HIBM-1H-1266: RNCC: 2 | RNVC: 1

12 Nov 2009

5340-27-017-6344
Handle Grip

270176344
388882750101: RNCC: 2 | RNVC: 1

11 Aug 2003

5340-27-053-1857
Rod End Clevis

270531857
901-CD-86-B13: RNCC: 2 | RNVC: 1

6 Apr 2011

5340-27-028-7780
Mounting Bracket

270287780
884-5800-995: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-041-9575
Mounting Bracket

270419575
4-013-002: RNCC: 2 | RNVC: 1

3 Jul 2008

5340-27-044-6202
Angle Bracket

270446202
Y533-71922-000: RNCC: 2 | RNVC: 1

23 Feb 2009

5340-27-029-8213
Mending Plate

270298213
5PS-13317-00-00: RNCC: 5 | RNVC: 9

25 May 2006

5340-27-038-8655
Mounting Bracket

270388655
65506-5K301: RNCC: 5 | RNVC: 9

2 Nov 2007

5340-27-022-6325
Handle Grip

270226325
8267747-2: RNCC: 2 | RNVC: 1

1 Apr 2004

5340-27-058-0508
Bow Handle

270580508
24813-ZV5-000: RNCC: 2 | RNVC: 1

5 Dec 2012

5340-27-052-6277
Bow Handle

270526277
897582194001: RNCC: 3 | RNVC: 2

10 Feb 2011

5340-27-029-4234
Hand Crank

270294234
58RS504690: RNCC: 2 | RNVC: 1

28 Mar 2006

5340-27-024-0344
Mounting Bracket

270240344
10131YB2045: RNCC: 2 | RNVC: 1

9 Sep 2004

5340-27-023-7649
Mounting Bracket

270237649
26779T: RNCC: 2 | RNVC: 1

5 Aug 2004

5340-27-054-9859
Mounting Bracket

270549859
5423785: RNCC: 2 | RNVC: 1

27 Oct 2011

5340-27-054-0531
Support Hook

270540531
TS-1028/1-A-M8: RNCC: 2 | RNVC: 2

19 Jul 2011

5340-27-047-3937
Mounting Bracket

270473937
92UB-5719-AA: RNCC: 3 | RNVC: 2

1 Dec 2009

5340-27-051-3197
Access Cover

270513197
SAP-A6-01-08: RNCC: 3 | RNVC: 2

15 Oct 2010

5340-27-008-7038
Angle Bracket

270087038
DR-00092-0101: RNCC: 2 | RNVC: 1
T720-G6100-300: RNCC: 2 | RNVC: 1

19 Dec 2000

5340-27-055-9279
Bridge Clamp

270559279
16M00-03662-AA: RNCC: 2 | RNVC: 1

16 Jan 2012

5340-27-048-7588
Mounting Bracket

270487588
PRC1984-LM: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-27-050-8533
Loop Clamp

270508533
6E5-24367-01: RNCC: 3 | RNVC: 2
6E5-24367-01: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-018-3150
Mending Plate

270183150
10121HS0031: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-9624
Mending Plate

270489624
103654: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-059-4966
Angle Bracket

270594966
VOE959080: RNCC: 3 | RNVC: 2
VOE959080: RNCC: 3 | RNVC: 2

23 Aug 2013

5340-27-023-9360
Mounting Bracket

270239360
6173777: RNCC: 2 | RNVC: 1

24 Aug 2004

5340-27-015-8952
Butt Hinge

270158952
99999-NIIN-DA0019954: RNCC: 2 | RNVC: 1
MENTESE,SARI,80MM: RNCC: 2 | RNVC: 1

12 Jun 2003

5340-27-049-0568
Mounting Bracket

270490568
1304-030: RNCC: 3 | RNVC: 2

30 Mar 2010

5340-27-053-8025
Mending Plate

270538025
C173-100150: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-27-050-7307
Mending Plate

270507307
79C01-58180-AA: RNCC: 2 | RNVC: 1

23 Aug 2010

5340-27-058-2727
Mending Plate

270582727
MM-7490-0075: RNCC: 2 | RNVC: 1

2 Jan 2013

5340-27-053-6862
Butt Hinge

270536862
C171-700070: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-27-007-3979
Mounting Bracket

270073979
95AG A101A17 AA: RNCC: 2 | RNVC: 1

3 Nov 1999

5340-27-051-8909
Mounting Bracket

270518909
BASLIK TUTUCU,PLASTIK: RNCC: 2 | RNVC: 1

3 Dec 2010

5340-27-045-7200
Loop Clamp

270457200
8A4801015: RNCC: 3 | RNVC: 2

8 Jun 2009

5340-27-007-1808
Retaining Clip

270071808
E 663208 S71M: RNCC: 2 | RNVC: 1

15 Sep 1999

5340-27-025-7389
Rod End Clevis

270257389
81058: RNCC: 2 | RNVC: 1

4 Apr 2005

5340-27-046-5246
Handle Grip

270465246
332A23-0150-2501: RNCC: 2 | RNVC: 1

31 Aug 2009

5340-27-058-3650
Mending Plate

270583650
03E-94342-0: RNCC: 2 | RNVC: 1

17 Jan 2013

5340-27-040-2026
Mending Plate

270402026
40-205-4235: RNCC: 2 | RNVC: 1
40-205-4235: RNCC: 2 | RNVC: 1

14 Jan 2008

5340-27-058-2060
Bridge Clamp

270582060
91592-SL0-A51: RNCC: 2 | RNVC: 1

20 Dec 2012

5340-27-059-6456
Loop Clamp

270596456
901-KL-329: RNCC: 2 | RNVC: 1

23 Sep 2013

5340-27-009-3846
Access Cover

270093846
10131YK0202: RNCC: 2 | RNVC: 1

27 Jun 2001

5340-27-039-0288
Key Holder

270390288
5340-TJ1-08670: RNCC: 2 | RNVC: 1

8 Nov 2007

5340-27-022-9755
Mending Plate

270229755
19159T: RNCC: 2 | RNVC: 1

8 May 2004

5340-27-022-9073
Mounting Bracket

270229073
3.03.01.04: RNCC: 2 | RNVC: 1

4 May 2004

5340-27-032-2475
Mounting Bracket

270322475
83A19-36050-AA: RNCC: 2 | RNVC: 1

12 Jun 2006

5340-27-059-0641
Mending Plate

270590641
04264628: RNCC: 2 | RNVC: 1

21 May 2013

5340-27-041-8102
Mounting Bracket

270418102
4898758: RNCC: 2 | RNVC: 1

19 Jun 2008

5340-27-024-4856
Rod End Clevis

270244856
1009 1YD 0013: RNCC: 2 | RNVC: 1

3 Nov 2004

5340-27-039-6452
Platen Holder

270396452
INT-001-12: RNCC: 5 | RNVC: 9

12 Dec 2007

5340-27-059-4802
Loop Clamp

270594802
VOE952630: RNCC: 3 | RNVC: 2
VOE952630: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-27-014-1913
Mounting Bracket

270141913
L-050: RNCC: 2 | RNVC: 1

23 Sep 2002

5340-27-034-8922
Bridge Clamp

270348922
12A14-32055-AA: RNCC: 2 | RNVC: 1

14 Feb 2007

5340-27-040-9762
Flush Catch

270409762
1010FK-2701464: RNCC: 2 | RNVC: 1
24FK1-512700.05: RNCC: 2 | RNVC: 1

15 Apr 2008

5340-27-028-7779
Mounting Bracket

270287779
884-5800-994: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-032-7789
Mounting Bracket

270327789
13C00-07028-AA: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-041-1700
Utility Access Door

270411700
AK-02: RNCC: 2 | RNVC: 1
AK-02: RNCC: 2 | RNVC: 1

6 May 2008

5340-27-026-9356
Loop Clamp

270269356
XS4Q9K155AA: RNCC: 2 | RNVC: 1

10 Aug 2005

5340-27-024-4961
Mounting Bracket

270244961
7770980: RNCC: 2 | RNVC: 1

4 Nov 2004

5340-27-033-9166
Mounting Bracket

270339166
0000GK0136436: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-059-8248
Access Cover

270598248
HAVA FILTRE KAPAGI: RNCC: 2 | RNVC: 1

14 Nov 2013

5340-27-053-8538
Mounting Bracket

270538538
H346051900: RNCC: 2 | RNVC: 1

28 Jun 2011

5340-27-021-0023
Access Cover

270210023
A-10: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-1766
Retaining Clip

270071766
W 700401 S300: RNCC: 2 | RNVC: 1

15 Sep 1999

5340-27-043-0988
Mounting Bracket

270430988
2ABEP00972: RNCC: 2 | RNVC: 1

13 Oct 2008

5340-27-058-4928
Clamping Catch

270584928
CH69780: RNCC: 3 | RNVC: 2
CH69780: RNCC: 3 | RNVC: 2

12 Feb 2013

5340-27-007-9846
Mounting Bracket

270079846
9509: RNCC: 2 | RNVC: 1

11 May 2000

5340-27-015-6788
Loop Clamp

270156788
05001FC0002: RNCC: 2 | RNVC: 1
292436: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-018-3167
Mounting Bracket

270183167
10121YT5481: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-055-2589
Utility Access Door

270552589
UG 036000 POZ-20: RNCC: 2 | RNVC: 1
UG 036000 POZ-20: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-017-8701
Loop Clamp

270178701
2.HIBM-4L-268/1-14: RNCC: 2 | RNVC: 1

30 Sep 2003

5340-27-043-1809
Padlock

270431809
ASMA KILIT, SIFRELI: RNCC: 2 | RNVC: 1

17 Oct 2008

5340-27-017-3647
Mending Plate

270173647
1009.1IS.0071-B1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-015-7133
Door-Hatch Dog

270157133
10091AKI0007: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-059-4846
Sliding Door Track

270594846
13C03-55392-AA: RNCC: 2 | RNVC: 1

23 Aug 2013

5340-27-054-6781
Mounting Bracket

270546781
55RS752915: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-035-0339
Mounting Bracket

270350339
1010005815: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-012-6885
Mounting Bracket

270126885
98011280: RNCC: 2 | RNVC: 1

5 Mar 2002

5340-27-056-4442
Mending Plate

270564442
203636: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-017-3838
Lever Bracket

270173838
1009.1IS.0071-D11: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-048-4658
Bridge Clamp

270484658
BW305007009A: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-27-015-9876
Mounting Bracket

270159876
7700 566 458: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-007-9978
Access Cover

270079978
DZMA000193: RNCC: 2 | RNVC: 1
DZMA000193: RNCC: 2 | RNVC: 1

22 May 2000

5340-27-028-6143
Access Cover

270286143
1010005479: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-016-5860
Expansion Shield

270165860
53RS800518: RNCC: 2 | RNVC: 1

6 Feb 2003

5340-27-059-6606
Loop Clamp

270596606
901-KL-386: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-059-6573
Loop Clamp

270596573
901-KL-355: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-053-1808
Flush Catch

270531808
6040-0537-4018: RNCC: 2 | RNVC: 2

6 Apr 2011

5340-27-053-3601
Mounting Bracket

270533601
H340120201: RNCC: 2 | RNVC: 1

22 Apr 2011

5340-27-044-0560
Butt Hinge

270440560
2125: RNCC: 2 | RNVC: 1

2 Jan 2009

5340-27-023-4304
Rod Retainer Clip

270234304
2405085: RNCC: 2 | RNVC: 1

30 Jun 2004

5340-27-021-0361
Mounting Bracket

270210361
1009.1KI.0121-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-5650
Mounting Bracket

270445650
75/30779: RNCC: 2 | RNVC: 2
75/30779: RNCC: 5 | RNVC: 9

17 Feb 2009

5340-27-054-6600
Mending Plate

270546600
98021361: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-27-045-5013
Access Cover

270455013
90.80720.0769: RNCC: 3 | RNVC: 2

12 May 2009

5340-27-057-5730
Mounting Bracket

270575730
M539F191300200: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-034-0925
Flush Catch

270340925
TC299383111: RNCC: 2 | RNVC: 1

11 Dec 2006

5340-27-048-4653
Bridge Clamp

270484653
BW302003209A: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-27-044-5708
Swivel Caster

270445708
2800-PPB-080F18: RNCC: 2 | RNVC: 1
2800-PPB-080F18: RNCC: 2 | RNVC: 1

17 Feb 2009

5340-27-026-3531
Lock-Release Lever

270263531
901-YK-60-2: RNCC: 2 | RNVC: 1

30 Jun 2005

5340-27-022-6758
Flush Catch

270226758
06095: RNCC: 2 | RNVC: 1

7 Apr 2004

5340-27-058-4276
Access Cover

270584276
14 V43 404 01: RNCC: 2 | RNVC: 1

29 Jan 2013

5340-27-059-3048
Access Cover

270593048
98019105-22: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-017-6261
Mounting Bracket

270176261
H-39-0295-50: RNCC: 2 | RNVC: 1

6 Aug 2003

5340-27-001-7245
Loop Clamp

270017245
TM55-1520-210-3: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-27-032-3239
Mounting Bracket

270323239
83A00-58713-AA: RNCC: 2 | RNVC: 1

20 Jun 2006

5340-27-019-8268
Mounting Bracket

270198268
05001DK0094: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-019-2019
Mounting Bracket

270192019
11001MP0157: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-012-5532
Mounting Bracket

270125532
10131YS0930: RNCC: 2 | RNVC: 1

11 Feb 2002

5340-27-059-7709
Mending Plate

270597709
6040-0039-8009: RNCC: 2 | RNVC: 1

31 Oct 2013

5340-27-048-2873
Bow Handle

270482873
HD247113: RNCC: 3 | RNVC: 2

26 Jan 2010

5340-27-043-2753
Mounting Bracket

270432753
01052-0154-07: RNCC: 2 | RNVC: 1

23 Oct 2008

5340-27-008-8950
Angle Bracket

270088950
98000182: RNCC: 2 | RNVC: 1

12 Feb 2001

5340-27-056-6624
Mounting Bracket

270566624
MM-7412-0024: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-059-6840
Loop Clamp

270596840
901-KL-405: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-049-7118
Catch Strike

270497118
73B01-61660-AB: RNCC: 2 | RNVC: 1

24 May 2010

5340-27-053-8578
Access Cover

270538578
AK-71100: RNCC: 2 | RNVC: 2

29 Jun 2011

5340-27-060-0351
Mounting Bracket

270600351
MM-7490-0123: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-054-0779
Mending Plate

270540779
98019873: RNCC: 2 | RNVC: 2

21 Jul 2011

5340-27-048-3451
Mending Plate

270483451
268.22: RNCC: 2 | RNVC: 1

2 Feb 2010

5340-27-008-2504
Angle Bracket

270082504
98001673: RNCC: 2 | RNVC: 1

29 Aug 2000

5340-27-025-1556
Access Cover

270251556
5340-TJ-02839: RNCC: 2 | RNVC: 1

18 Jan 2005

5340-27-026-1332
Mounting Bracket

270261332
1010FG-1804473: RNCC: 2 | RNVC: 1

8 Jun 2005

5340-27-020-7548
Mounting Bracket

270207548
1009.1KI.0244-1*2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-6549
Mending Plate

270586549
ADOP-SHELTER-280-CP: RNCC: 2 | RNVC: 1

5 Mar 2013

5340-27-008-3151
Rod Retainer Clip

270083151
14215282: RNCC: 2 | RNVC: 1

14 Sep 2000

5340-27-048-9233
Mounting Bracket

270489233
10029353: RNCC: 2 | RNVC: 1

18 Mar 2010

5340-27-025-2437
Mechanical Stop

270252437
MM-7550-0621: RNCC: 2 | RNVC: 1

8 Feb 2005

5340-27-058-7933
Mounting Bracket

270587933
55RS351081: RNCC: 2 | RNVC: 1

3 Apr 2013

5340-27-059-0560
Loop Clamp

270590560
VOE20450987: RNCC: 3 | RNVC: 2
VOE20450987: RNCC: 3 | RNVC: 2

21 May 2013

5340-27-005-3742
Threaded Rod End

270053742
1012-1YC-5006: RNCC: 3 | RNVC: 2

27 Oct 1997

5340-27-017-8296
Mounting Bracket

270178296
6009-0532-8045: RNCC: 2 | RNVC: 1

17 Sep 2003

5340-27-007-1703
Retaining Clip

270071703
E 860399 S104: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-057-4221
Mounting Bracket

270574221
1.HIBM-1I-3014: RNCC: 2 | RNVC: 1

6 Aug 2012

5340-27-015-8934
Mortise Lock

270158934
99999-NIIN-DA0020995: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-018-6409
Loop Clamp

270186409
HSN06-013: RNCC: 2 | RNVC: 1
1010FG-0401325: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-6956
Mounting Bracket

270186956
1010FK-2810506: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-043-0787
Bumper

270430787
667521C1: RNCC: 2 | RNVC: 1

9 Oct 2008

5340-27-028-6475
Mending Plate

270286475
72A15-59291-AA: RNCC: 2 | RNVC: 1

26 Jan 2006

5340-27-005-1698
Access Cover

270051698
1010001059: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-005-1521
Mortise Latch

270051521
1010001840: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-024-1478
Mounting Bracket

270241478
3 HD UNI 007: RNCC: 2 | RNVC: 1

22 Sep 2004

5340-27-055-2592
Utility Access Door

270552592
UG 045000 POZ-20: RNCC: 2 | RNVC: 1
UG 045000 POZ-20: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-028-7612
Mounting Bracket

270287612
884-5810-968: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-021-4296
Mounting Bracket

270214296
1010FK-2811751: RNCC: 2 | RNVC: 1
1010FK2811751: RNCC: 2 | RNVC: 1
1010FK-2811751: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-0668
Bail Handle

270570668
901-AT-412-C12: RNCC: 2 | RNVC: 1

14 Jun 2012

5340-27-035-0382
Mounting Bracket

270350382
901-TD-279: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-026-2974
Rod End Clevis

270262974
10131YC0343: RNCC: 2 | RNVC: 1
10131YC0343: RNCC: 2 | RNVC: 1
81DB3283-CA: RNCC: 2 | RNVC: 1

27 Jun 2005

5340-27-040-7315
Mounting Bracket

270407315
1.HIBM-1I-2715: RNCC: 2 | RNVC: 1

11 Mar 2008

5340-27-022-0647
Mending Plate

270220647
1009 1YS 1171: RNCC: 2 | RNVC: 1

30 Jan 2004

5340-27-017-3698
Pad Eye

270173698
1009.1IS.0056-1F: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-005-1717
Access Cover

270051717
1010001955: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-004-7981
Access Cover

270047981
10091YK5122: RNCC: 3 | RNVC: 2

6 Nov 1996

5340-27-054-9519
Mounting Bracket

270549519
3702-494225212: RNCC: 2 | RNVC: 1

25 Oct 2011

5340-27-056-3419
Angle Bracket

270563419
3831898: RNCC: 2 | RNVC: 2

15 Mar 2012

5340-27-022-4932
Mending Plate

270224932
3862 02: RNCC: 2 | RNVC: 1

16 Mar 2004

5340-27-038-3679
Mending Plate

270383679
12334-05H01: RNCC: 5 | RNVC: 9

2 Oct 2007

5340-27-033-6443
Mounting Bracket

270336443
40-205-5135: RNCC: 2 | RNVC: 1
40-205-5135: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-042-9030
Coat And Hat Hook

270429030
BAL-284: RNCC: 2 | RNVC: 1

17 Sep 2008

5340-27-059-2652
Mounting Bracket

270592652
55RS752979: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-028-7776
Mounting Bracket

270287776
884-5800-991: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-007-1763
Retaining Clip

270071763
W 700348 S309: RNCC: 2 | RNVC: 1

15 Sep 1999

5340-27-038-7360
Mounting Bracket

270387360
98000103: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-006-9158
Mounting Bracket

270069158
96AG A22147 AA: RNCC: 2 | RNVC: 1

24 Jun 1999

5340-27-017-5365
Mounting Bracket

270175365
MP001678: RNCC: 2 | RNVC: 1

11 Jul 2003

5340-27-005-1506
Loop Clamp

270051506
1010001767: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-022-1438
Access Cover

270221438
06336: RNCC: 2 | RNVC: 1

13 Feb 2004

5340-27-018-3158
Mechanical Stop

270183158
10121YA5370: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-051-1402
Mounting Bracket

270511402
16F00-22120-AA: RNCC: 2 | RNVC: 1

6 Oct 2010

5340-27-059-0893
Angle Bracket

270590893
04264109: RNCC: 2 | RNVC: 1

23 May 2013

5340-27-050-3862
Mending Plate

270503862
105256: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-054-7858
Mounting Bracket

270547858
1010FMA-0005042: RNCC: 2 | RNVC: 1

14 Oct 2011

5340-27-025-7427
Mounting Bracket

270257427
2ABM 1IMZA 0001/05: RNCC: 2 | RNVC: 1

4 Apr 2005

5340-27-028-7769
Mounting Bracket

270287769
884-5800-984: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-044-9978
Mending Plate

270449978
12E00-01765-AA: RNCC: 2 | RNVC: 1

25 Mar 2009

5340-27-025-7428
Mounting Bracket

270257428
2ABM 1IMZA 0001/06: RNCC: 2 | RNVC: 1

4 Apr 2005

5340-27-042-8103
Mounting Bracket

270428103
72A97-60195-AA: RNCC: 2 | RNVC: 1

12 Sep 2008

5340-27-047-8669
Bridge Clamp

270478669
13C25-03701-AA: RNCC: 2 | RNVC: 1

21 Dec 2009

5340-27-044-9710
Flush Catch

270449710
02008-TRS-10-0000-25: RNCC: 3 | RNVC: 2

24 Mar 2009

5340-27-027-2763
Mounting Bracket

270272763
20-01-320-001: RNCC: 2 | RNVC: 1

22 Sep 2005

5340-27-034-9870
Mounting Bracket

270349870
1.HIBM-1I-2306D46: RNCC: 2 | RNVC: 1

20 Feb 2007

5340-27-055-4930
Mounting Bracket

270554930
5K205899: RNCC: 2 | RNVC: 1

8 Dec 2011

5340-27-004-5548
Butt Hinge

270045548
10091YM5001: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-053-2893
Mounting Bracket

270532893
H341123602: RNCC: 2 | RNVC: 1

15 Apr 2011

5340-27-008-4711
Handle Grip

270084711
8K230246: RNCC: 2 | RNVC: 1

16 Oct 2000

5340-27-021-7224
Corner Brace

270217224
27749: RNCC: 2 | RNVC: 1

25 Dec 2003

5340-27-056-8818
Utility Access Door

270568818
OOCYST: RNCC: 5 | RNVC: 9

23 May 2012

5340-27-044-2635
Loop Clamp

270442635
VOE14340767: RNCC: 1 | RNVC: 2
14340767: RNCC: 3 | RNVC: 2
14340767: RNCC: 5 | RNVC: 9

21 Jan 2009

5340-27-051-4131
Mending Plate

270514131
108041: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-024-3296
Mounting Bracket

270243296
1.HIBM-1A-611: RNCC: 2 | RNVC: 1

13 Oct 2004

5340-27-023-3793
Mounting Bracket

270233793
06490: RNCC: 2 | RNVC: 1
11645150-1: RNCC: 2 | RNVC: 1

25 Jun 2004

5340-27-018-6744
Mounting Bracket

270186744
1010FK-2704164: RNCC: 2 | RNVC: 1
255-01-01-02-4: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-055-5435
Mounting Bracket

270555435
MM-7412-0152: RNCC: 2 | RNVC: 1

9 Dec 2011

5340-27-053-1557
Rod Retainer Clip

270531557
898047417051: RNCC: 2 | RNVC: 1

4 Apr 2011

5340-27-007-9979
Access Cover

270079979
DZMA000195: RNCC: 2 | RNVC: 1
DZMA000195: RNCC: 2 | RNVC: 1
DZMA000195: RNCC: 5 | RNVC: 9

22 May 2000

5340-27-015-0438
Loop Clamp

270150438
7997713: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-021-1580
Mounting Bracket

270211580
1009.1KI.0244-1*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-012-6905
Angle Bracket

270126905
988-6227-001: RNCC: 2 | RNVC: 1

5 Mar 2002

5340-27-043-7952
Mending Plate

270437952
M6-PLAKA: RNCC: 2 | RNVC: 1
M6M: RNCC: 2 | RNVC: 1
M6M: RNCC: 2 | RNVC: 1
M6-MFM-15: RNCC: 5 | RNVC: 9

16 Dec 2008

5340-27-046-6789
Mounting Bracket

270466789
Y532-67003-200: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-021-9536
Clamping Catch

270219536
540-011-179-1: RNCC: 2 | RNVC: 1

15 Jan 2004

5340-27-051-3233
Mounting Bracket

270513233
55RS860157: RNCC: 2 | RNVC: 1

15 Oct 2010

5340-27-005-1693
Access Cover

270051693
1010000260: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-004-7886
Angle Bracket

270047886
10091YT5045: RNCC: 3 | RNVC: 2

2 Nov 1996

5340-27-058-0544
Mending Plate

270580544
87701-ZZ5-790: RNCC: 2 | RNVC: 1

5 Dec 2012

5340-27-056-7873
Catch Strike

270567873
2T14V44163AG: RNCC: 2 | RNVC: 1

11 May 2012

5340-27-001-7409
Access Door Hinge

270017409
CESSNA-185-SUPP0711037-10: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-029-6656
Mending Plate

270296656
5PS-1482K-00-00: RNCC: 5 | RNVC: 9

28 Apr 2006

5340-27-021-5344
Block Clamp

270215344
1010FG-0000641: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-1807
Mending Plate

270531807
6040-0537-4016: RNCC: 2 | RNVC: 2

6 Apr 2011

5340-27-038-7582
Mounting Bracket

270387582
10091MK0321: RNCC: 2 | RNVC: 1

31 Oct 2007

5340-27-049-6605
Bridge Clamp

270496605
40 MM, PPRC, TEKLI: RNCC: 2 | RNVC: 1
40 MM, PPRC, TEKLI: RNCC: 2 | RNVC: 1
40 MM, PPRC, TEKLI: RNCC: 2 | RNVC: 1

18 May 2010

5340-27-050-1571
Mending Plate

270501571
108057: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-009-6639
Mounting Bracket

270096639
1807 94: RNCC: 2 | RNVC: 1

14 Aug 2001

5340-27-048-4739
Mending Plate

270484739
897305517051: RNCC: 2 | RNVC: 1

11 Feb 2010

5340-27-006-9487
Mounting Bracket

270069487
P92AG A10203 AA: RNCC: 2 | RNVC: 1

30 Jun 1999

5340-27-004-5701
Catch Strike

270045701
10131YB0074: RNCC: 3 | RNVC: 2

20 May 1996

5340-27-055-6890
Access Cover

270556890
52RS024654: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-018-6493
Rod End Connector

270186493
1010FG-0612028: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-047-9889
Mounting Bracket

270479889
140100135: RNCC: 2 | RNVC: 2
140100135: RNCC: 3 | RNVC: 2

28 Dec 2009

5340-27-043-8679
Catch Strike

270438679
12B19-55452-AA: RNCC: 2 | RNVC: 1

18 Dec 2008

5340-27-048-5681
Bow Handle

270485681
HD279123X: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-006-9498
Mounting Bracket

270069498
P94AT A250K48 AA: RNCC: 2 | RNVC: 1

1 Jul 1999

5340-27-025-8438
Rod End Clevis

270258438
2ABM 1MK 0079: RNCC: 2 | RNVC: 1

19 Apr 2005

5340-27-048-9255
Angle Bracket

270489255
10029372: RNCC: 2 | RNVC: 1

18 Mar 2010

5340-27-043-9311
Lock Key

270439311
02026030002: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-048-9865
Mending Plate

270489865
105921: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-27-014-0207
Mending Plate

270140207
83.42390.0501: RNCC: 2 | RNVC: 1

28 Aug 2002

5340-27-035-8807
Bridge Clamp

270358807
3C4616A300AA: RNCC: 2 | RNVC: 1

5 Apr 2007

5340-27-010-1309
Bridge Clamp

270101309
NTC9208: RNCC: 2 | RNVC: 1

6 Nov 2001

5340-27-059-6843
Loop Clamp

270596843
901-KL-407: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-041-9098
Mounting Bracket

270419098
4-005-002: RNCC: 1 | RNVC: 2

30 Jun 2008

5340-27-045-7087
Padlock

270457087
EA2114010: RNCC: 2 | RNVC: 2

5 Jun 2009

5340-27-059-6816
Loop Clamp

270596816
901-KL-413: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-057-4266
Mending Plate

270574266
020019000500: RNCC: 2 | RNVC: 1

7 Aug 2012

5340-27-019-1974
Mounting Bracket

270191974
98000383: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-1683
Access Cover

270051683
1010002303: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-056-8663
Mending Plate

270568663
203355: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-059-6575
Loop Clamp

270596575
901-KL-358: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-009-9331
Access Cover

270099331
98012346-1: RNCC: 2 | RNVC: 1

11 Oct 2001

5340-27-007-1733
Retaining Clip

270071733
E 865443 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-050-5110
Bridge Clamp

270505110
DIN3016-1-D1-10-15-W3-CR: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-059-7680
Mounting Bracket

270597680
9999-0000-0345: RNCC: 2 | RNVC: 1

31 Oct 2013

5340-27-006-7118
Access Cover

270067118
S42023-A799-S2: RNCC: 2 | RNVC: 1

22 Mar 1999

5340-27-032-2905
Mounting Bracket

270322905
83A00-58739-AA: RNCC: 2 | RNVC: 1

15 Jun 2006

5340-27-021-4114
Mounting Bracket

270214114
1009.1KI.0223-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-012-3876
Sliding Door Track

270123876
94VB V513A12 AA: RNCC: 2 | RNVC: 1

29 Jan 2002

5340-27-021-1575
Mounting Bracket

270211575
1009.1KI.0264-2*2-6.2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-034-1050
Mounting Bracket

270341050
10131YB0177: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-005-1724
Access Cover

270051724
1010000594: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-053-8633
Mounting Bracket

270538633
H346075300: RNCC: 2 | RNVC: 1

29 Jun 2011

5340-27-019-0446
Loop Clamp

270190446
05001HK0028: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-008-1474
Retaining Strap

270081474
HRH24C2404: RNCC: 2 | RNVC: 1
7148: RNCC: 2 | RNVC: 1

24 Jul 2000

5340-27-020-7902
Mounting Bracket

270207902
1009.1KI.0264-2*5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-8101
Mending Plate

270178101
3522-1142-2300: RNCC: 2 | RNVC: 1

10 Sep 2003

5340-27-048-7352
Loop Clamp

270487352
7291-14: RNCC: 2 | RNVC: 1
7291-14: RNCC: 5 | RNVC: 9

24 Feb 2010

5340-27-036-1183
Mounting Bracket

270361183
1C442A275BB: RNCC: 2 | RNVC: 1

1 May 2007

5340-27-037-5451
Expansion Plug

270375451
69395-L1100: RNCC: 5 | RNVC: 9

6 Aug 2007

5340-27-022-4432
Expansion Shield

270224432
DA0012286: RNCC: 2 | RNVC: 1

10 Mar 2004

5340-27-059-6602
Loop Clamp

270596602
901-KL-381: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-028-7946
Mounting Bracket

270287946
72B18-60320-AA: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-014-3925
Catch Strike

270143925
YC15 16K689 AC: RNCC: 2 | RNVC: 1

10 Oct 2002

5340-27-006-9491
Mounting Bracket

270069491
93AB A20450 AC: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-023-8885
Loop Clamp

270238885
2421300004: RNCC: 2 | RNVC: 1

14 Aug 2004

5340-27-024-8130
Access Cover

270248130
8332200437: RNCC: 2 | RNVC: 1

7 Dec 2004

5340-27-026-0639
Mounting Bracket

270260639
7707666: RNCC: 2 | RNVC: 1

27 May 2005

5340-27-028-7606
Mounting Bracket

270287606
884-5810-958: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-001-7279
Loop Clamp

270017279
TM55-1520-210-6MS21919WD6-48: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-051-4885
Mounting Bracket

270514885
400253-004: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-27-032-8597
Mounting Bracket

270328597
13C00-01714-AA: RNCC: 2 | RNVC: 1

25 Sep 2006

5340-27-051-7417
Mending Plate

270517417
1177070: RNCC: 3 | RNVC: 2

24 Nov 2010

5340-27-053-8358
Mounting Bracket

270538358
C171-A00100: RNCC: 2 | RNVC: 2

28 Jun 2011

5340-27-047-5741
Mounting Bracket

270475741
16F00-71518-AA: RNCC: 2 | RNVC: 1

9 Dec 2009

5340-27-055-1487
Bow Handle

270551487
98022336: RNCC: 2 | RNVC: 2

16 Nov 2011

5340-27-058-3666
Expansion Plug

270583666
9166-600-00Y: RNCC: 2 | RNVC: 1

17 Jan 2013

5340-27-026-1791
Mending Plate

270261791
2010 6370.038: RNCC: 2 | RNVC: 1

14 Jun 2005

5340-27-004-5138
Access Cover

270045138
10121YK5403: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-013-2449
Loop Clamp

270132449
53407777700035: RNCC: 2 | RNVC: 1
KEL.D-25MM: RNCC: 2 | RNVC: 1
KELEPCE 1": RNCC: 2 | RNVC: 1
KELEPCE 1": RNCC: 2 | RNVC: 1
90464-07009-00: RNCC: 2 | RNVC: 1

20 May 2002

5340-27-010-2044
Angle Bracket

270102044
98012673: RNCC: 2 | RNVC: 1

14 Nov 2001

5340-27-017-3872
Mounting Bracket

270173872
1009.1IS.0058-20: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-014-9830
Mortise Lock

270149830
10091YK0277: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-8331
Catch Strike

270158331
02TMO5IKO1001.: RNCC: 2 | RNVC: 1

15 May 2002

5340-27-048-0338
Mounting Bracket

270480338
S-003: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-013-1434
Loop Clamp

270131434
HAT, KLEMENS: RNCC: 2 | RNVC: 1
45271-16020: RNCC: 2 | RNVC: 1
U KLEMENS: RNCC: 5 | RNVC: 2

3 May 2002

5340-27-027-0947
Elastic Strap

270270947
25704-197720-00-0: RNCC: 2 | RNVC: 1

2 Sep 2005

5340-27-055-2594
Utility Access Door

270552594
158062 POZ-2: RNCC: 2 | RNVC: 1
158062 POZ-2: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-010-1880
Mounting Bracket

270101880
SM 1180: RNCC: 2 | RNVC: 1
AYPAR 60339128: RNCC: 2 | RNVC: 1
60339128: RNCC: 2 | RNVC: 1

5 Sep 2002

5340-27-055-3416
Mounting Bracket

270553416
1692-0203: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-021-7437
Plug Button

270217437
4109996: RNCC: 2 | RNVC: 1

25 Dec 2003

5340-27-028-0694
Flush Catch

270280694
16001YK0269: RNCC: 2 | RNVC: 1

29 Nov 2005

5340-27-054-8095
Mounting Bracket

270548095
5440802: RNCC: 2 | RNVC: 1

17 Oct 2011

5340-27-021-0354
Mounting Bracket

270210354
1009.1KI.0308-8: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-9777
Mending Plate

270219777
1009 1KI 0274-1/8: RNCC: 2 | RNVC: 1

16 Jan 2004

5340-27-049-5098
Bridge Clamp

270495098
105271-6: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-040-5297
Angle Bracket

270405297
130-1-190: RNCC: 2 | RNVC: 1

28 Jan 2008

5340-27-021-0362
Mounting Bracket

270210362
1009.1KI.0131-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-0187
Strap Hinge Leaf

270210187
1009.1KI.0189-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3864
Mounting Bracket

270173864
1009.1IS.0053-4: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-017-3815
Access Cover

270173815
1009.1IS.0068-B/8: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-058-2999
Mending Plate

270582999
0421 4170: RNCC: 2 | RNVC: 1

7 Jan 2013

5340-27-004-5518
Retaining Strap

270045518
10091YP5018: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-018-3594
Mending Plate

270183594
10121YP5553: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-9640
Mending Plate

270489640
103671: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-053-4011
Loop Clamp

270534011
H342310400: RNCC: 2 | RNVC: 1
MEO27313: RNCC: 2 | RNVC: 1

28 Apr 2011

5340-27-054-4267
Mending Plate

270544267
98020072: RNCC: 3 | RNVC: 2

9 Sep 2011

5340-27-042-5810
Access Cover

270425810
54561246: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-043-9500
Butt Hinge

270439500
09013DM0103: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-044-1224
Mounting Bracket

270441224
12E00-36922-AA: RNCC: 2 | RNVC: 1

9 Jan 2009

5340-27-044-2999
Mounting Bracket

270442999
YC1H19E754JA: RNCC: 2 | RNVC: 1

23 Jan 2009

5340-27-021-1035
Access Cover

270211035
1010FK-2701439: RNCC: 2 | RNVC: 1
1010FK-2701439: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-015-0366
Loop Clamp

270150366
7335973: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-023-3733
Mounting Bracket

270233733
U GECME: RNCC: 2 | RNVC: 1

24 Jun 2004

5340-27-025-3625
Filler Opening Cap

270253625
5002697134: RNCC: 2 | RNVC: 1

4 Mar 2005

5340-27-021-2807
Catch Strike

270212807
1009.1KI.0264-1*1-6.2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-0319
Utility Access Door

270440319
950X2150MM, PVC: RNCC: 1 | RNVC: 2

29 Dec 2008

5340-27-032-6505
Access Cover

270326505
40-765-8050: RNCC: 2 | RNVC: 1
40-765-8050: RNCC: 2 | RNVC: 1

29 Aug 2006

5340-27-055-9123
Mounting Bracket

270559123
102809: RNCC: 2 | RNVC: 2

13 Jan 2012

5340-27-051-1070
Mending Plate

270511070
101874: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-058-5294
Expansion Plug

270585294
102-F490-1610-002-000-0 POZ-2: RNCC: 2 | RNVC: 1

18 Feb 2013

5340-27-017-3755
Recess Handle

270173755
1009.1IS.0052-7: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-028-7999
Mounting Bracket

270287999
6271161: RNCC: 2 | RNVC: 1

8 Feb 2006

5340-27-058-9501
Mending Plate

270589501
CV71898: RNCC: 2 | RNVC: 1

7 May 2013

5340-27-050-0320
Access Cover

270500320
AR533T147600000: RNCC: 2 | RNVC: 1

18 Jun 2010

5340-27-051-6934
Catch Strike

270516934
20251: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-27-042-3793
Padlock

270423793
603/U: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-059-8915
Hand Crank

270598915
M10.1.915.1: RNCC: 2 | RNVC: 1

3 Dec 2013

5340-27-010-2327
Access Cover

270102327
98005640: RNCC: 2 | RNVC: 1

16 Nov 2001

5340-27-058-9520
Mending Plate

270589520
CV71895: RNCC: 2 | RNVC: 1

7 May 2013

5340-27-053-6339
Mounting Bracket

270536339
76 8C 583 99R: RNCC: 3 | RNVC: 2

30 May 2011

5340-27-059-7893
Mounting Bracket

270597893
SGB-DKP-M-4-0003: RNCC: 2 | RNVC: 1

8 Nov 2013

5340-27-050-2428
Bow Handle

270502428
KOL, 60.LIK,6.5 MM: RNCC: 2 | RNVC: 1

12 Jul 2010

5340-27-058-5114
Mounting Bracket

270585114
102-F490-2220-012-000-0: RNCC: 2 | RNVC: 1

15 Feb 2013

5340-27-059-7810
Mending Plate

270597810
98023180: RNCC: 2 | RNVC: 1

4 Nov 2013

5340-27-034-9133
Bow Handle

270349133
710113: RNCC: 2 | RNVC: 1

15 Feb 2007

5340-27-035-7992
Track Stop

270357992
51735975: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-039-1658
Bridge Clamp

270391658
20MM KELEPCE: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-018-3491
Flush Catch

270183491
10121YM5573: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-025-7572
Mounting Bracket

270257572
82650: RNCC: 2 | RNVC: 1

6 Apr 2005

5340-27-021-4325
Mounting Bracket

270214325
1012.1HSCA.03-26: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-038-7442
Mounting Bracket

270387442
10091YD0358: RNCC: 2 | RNVC: 1

30 Oct 2007

5340-27-043-8683
Catch Strike

270438683
12B19-55450-AA: RNCC: 2 | RNVC: 1

18 Dec 2008

5340-27-055-7935
Mounting Bracket

270557935
Z3I410: RNCC: 2 | RNVC: 2

5 Jan 2012

5340-27-021-3494
Mounting Bracket

270213494
1009.1KI.0273-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-7941
Rod End Clevis

270577941
547A3507168: RNCC: 2 | RNVC: 1

22 Oct 2012

5340-27-003-9879
Access Cover

270039879
10121YK5005: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-005-1720
Access Cover

270051720
1010000310: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-047-9397
Caster Wheel

270479397
12X12CM: RNCC: 2 | RNVC: 1

24 Dec 2009

5340-27-022-9078
Mounting Bracket

270229078
3.03.04.09: RNCC: 2 | RNVC: 1

4 May 2004

5340-27-010-2576
Mounting Bracket

270102576
98003580: RNCC: 2 | RNVC: 1

20 Nov 2001

5340-27-040-4514
Mounting Bracket

270404514
11674490: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-053-6847
Mounting Bracket

270536847
76 8C 583 99R: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-27-012-1427
Mounting Bracket

270121427
95VB 13A773 AA: RNCC: 2 | RNVC: 1

15 Jan 2002

5340-27-055-6887
Mounting Bracket

270556887
58RS600588: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-018-1903
Mounting Bracket

270181903
897089173001: RNCC: 2 | RNVC: 1

6 Nov 2003

5340-27-017-9295
Bow Handle

270179295
388882750001: RNCC: 2 | RNVC: 1

10 Oct 2003

5340-27-005-1553
Bridge Clamp

270051553
1010000571: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-059-0131
Mounting Bracket

270590131
40.6010.200019: RNCC: 5 | RNVC: 9

15 May 2013

5340-27-042-7491
Utility Access Door

270427491
KAPI, AHSAP: RNCC: 2 | RNVC: 1

10 Sep 2008

5340-27-058-9205
Mounting Bracket

270589205
VOE12720045: RNCC: 3 | RNVC: 2

30 Apr 2013

5340-27-058-7930
Mounting Bracket

270587930
55RS752815: RNCC: 2 | RNVC: 1

3 Apr 2013

5340-27-053-1010
Mounting Bracket

270531010
2.HIBM-4H-0666/1-A8: RNCC: 2 | RNVC: 1

28 Mar 2011

5340-27-032-8184
Butt Hinge

270328184
13D00-55040-AB: RNCC: 2 | RNVC: 1

20 Sep 2006

5340-27-027-0585
Lock Key

270270585
105883: RNCC: 2 | RNVC: 1

29 Aug 2005

5340-27-040-3868
Mounting Bracket

270403868
11615497: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-058-8202
Mounting Bracket

270588202
10080856: RNCC: 2 | RNVC: 1
10080856: RNCC: 5 | RNVC: 9

9 Apr 2013

5340-27-056-3171
Access Cover

270563171
3835029: RNCC: 3 | RNVC: 2

14 Mar 2012

5340-27-018-6895
Mounting Bracket

270186895
1010FK-2808425: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-015-6517
Butt Hinge

270156517
05001HM0033: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-001-7669
Lock-Release Lever

270017669
TM55-6610-218-4TE-653: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-27-058-7833
Shimmy Damper

270587833
VOE12736336: RNCC: 3 | RNVC: 2
VOE12736336: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-27-035-8444
Plug Button

270358444
4239710: RNCC: 2 | RNVC: 1

3 Apr 2007

5340-27-050-5101
Mending Plate

270505101
107603: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-041-8310
Bridge Clamp

270418310
423003800: RNCC: 2 | RNVC: 1

20 Jun 2008

5340-27-043-0226
Angle Bracket

270430226
40.780.2002: RNCC: 2 | RNVC: 1
40.780.2002: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-008-9282
Access Door Hinge

270089282
98000722: RNCC: 2 | RNVC: 1

22 Feb 2001

5340-27-043-8980
Swivel Caster

270438980
250-01-03: RNCC: 2 | RNVC: 1

22 Dec 2008

5340-27-006-9203
Mounting Bracket

270069203
91AG A034 78 AF: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-018-8429
Mending Plate

270188429
T102075: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-038-7052
Butt Hinge

270387052
10091YM0951: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-014-2592
Mounting Bracket

270142592
541227001051: RNCC: 2 | RNVC: 1
897047150051: RNCC: 2 | RNVC: 1

2 Oct 2002

5340-27-054-4266
Mending Plate

270544266
98020070: RNCC: 3 | RNVC: 2

9 Sep 2011

5340-27-046-7088
Mounting Bracket

270467088
2ABEP01156: RNCC: 2 | RNVC: 1

2 Oct 2009

5340-27-048-9641
Mending Plate

270489641
103673: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-006-0867
Access Cover

270060867
K8A1112: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-003-9220
Loop Clamp

270039220
07001MN0268: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-010-2610
Mending Plate

270102610
10131YS0816: RNCC: 2 | RNVC: 1

21 Nov 2001

5340-27-017-0154
Mending Plate

270170154
10131YT0662: RNCC: 2 | RNVC: 1

29 Apr 2003

5340-27-043-8500
Expansion Plug

270438500
53RS803179: RNCC: 2 | RNVC: 1

18 Dec 2008

5340-27-007-7586
Mounting Bracket

270077586
10131YB0604: RNCC: 2 | RNVC: 1

9 Feb 2000

5340-27-038-1369
Mounting Bracket

270381369
897332358251: RNCC: 2 | RNVC: 1

17 Sep 2007

5340-27-021-1906
Mounting Bracket

270211906
1012.1HSCA.03-13: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-6554
Mounting Bracket

270496554
72A12-60318-AA: RNCC: 2 | RNVC: 1

17 May 2010

5340-27-058-0304
Access Cover

270580304
953500-8857: RNCC: 2 | RNVC: 1

3 Dec 2012

5340-27-032-5179
Mounting Bracket

270325179
T532-G2500-200: RNCC: 2 | RNVC: 1

27 Jul 2006

5340-27-032-8429
Mounting Bracket

270328429
1.HIBM-1I-2405: RNCC: 2 | RNVC: 1

21 Sep 2006

5340-27-017-3695
Pad Eye

270173695
1009.1IS.0053-2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-027-7925
Angle Bracket

270277925
M52T3011R450159: RNCC: 2 | RNVC: 1

7 Nov 2005

5340-27-048-9614
Mending Plate

270489614
103637: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-011-0700
Mechanical Stop

270110700
7115310378: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-041-8861
Mounting Bracket

270418861
05403: RNCC: 2 | RNVC: 1
05403: RNCC: 2 | RNVC: 1

27 Jun 2008

5340-27-026-1213
Bail Handle

270261213
MKE 401 044-: RNCC: 2 | RNVC: 1

6 Jun 2005

5340-27-020-7512
Mounting Bracket

270207512
10131YB1013: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-038-0217
Mounting Bracket

270380217
73A04-75042-AA: RNCC: 2 | RNVC: 1

10 Sep 2007

5340-27-022-3675
Bridge Clamp

270223675
07233: RNCC: 2 | RNVC: 1

2 Mar 2004

5340-27-032-6916
Mounting Bracket

270326916
13C00-31060-AB: RNCC: 2 | RNVC: 1

8 Sep 2006

5340-27-050-2255
Butt Hinge

270502255
4451189: RNCC: 2 | RNVC: 1

8 Jul 2010

5340-27-017-3706
Pad Eye

270173706
1009.1IS.0086: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-020-7556
Mounting Bracket

270207556
1009.1KI.0264-1*2-7: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-7799
Mending Plate

270537799
C163-100200: RNCC: 3 | RNVC: 2

17 Jun 2011

5340-27-055-4907
Mounting Bracket

270554907
5441465-B: RNCC: 2 | RNVC: 2

8 Dec 2011

5340-27-056-3531
Caster Wheel

270563531
ZKR300X50: RNCC: 2 | RNVC: 1

16 Mar 2012

5340-27-005-1557
Support Hook

270051557
1010001608: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-014-6139
Mounting Bracket

270146139
2106000120: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-008-6500
Strap Hinge Leaf

270086500
98005404: RNCC: 2 | RNVC: 1

8 Dec 2000

5340-27-057-5697
Mounting Bracket

270575697
M539F327100600: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-054-4268
Mending Plate

270544268
98020073: RNCC: 3 | RNVC: 2

9 Sep 2011

5340-27-051-0749
Mounting Bracket

270510749
UZK06: RNCC: 2 | RNVC: 1

29 Sep 2010

5340-27-018-7042
Mounting Bracket

270187042
1010FG-2201612: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-036-8081
Mending Plate

270368081
C01AN19: RNCC: 2 | RNVC: 1

29 Jun 2007

5340-27-047-3851
Mounting Bracket

270473851
974F-9K345-DB: RNCC: 1 | RNVC: 2

26 Nov 2009

5340-27-033-6218
Expansion Shield

270336218
5340DUBE9880003: RNCC: 2 | RNVC: 1

6 Nov 2006

5340-27-021-8611
Mounting Bracket

270218611
1009 1AD 0033: RNCC: 2 | RNVC: 1

7 Jan 2004

5340-27-049-1753
Mounting Bracket

270491753
MP002798: RNCC: 2 | RNVC: 1

9 Apr 2010

5340-27-026-6075
Catch Strike

270266075
10131YK0857: RNCC: 2 | RNVC: 1
10131YK0857: RNCC: 2 | RNVC: 1

14 Jul 2005

5340-27-056-8705
Mending Plate

270568705
203247: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-012-1441
Mounting Bracket

270121441
10131 YB 0743: RNCC: 2 | RNVC: 1

16 Jan 2002

5340-27-027-2574
Angle Bracket

270272574
15-01-407-005: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-048-3253
Mounting Bracket

270483253
302722: RNCC: 2 | RNVC: 1

29 Jan 2010

5340-27-008-2512
Mounting Bracket

270082512
98005128: RNCC: 2 | RNVC: 1

29 Aug 2000

5340-27-057-0898
Flush Catch

270570898
2.HIBM-4H-0666/7-0008: RNCC: 2 | RNVC: 1

18 Jun 2012

5340-27-035-6313
Access Cover

270356313
81.25114.0024: RNCC: 2 | RNVC: 1

22 Mar 2007

5340-27-022-8203
Mounting Bracket

270228203
K.1747: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-021-1573
Mounting Bracket

270211573
1009.1KI.0264-2*2-7.1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-026-2395
Catch Strike

270262395
RAYBER: RNCC: 2 | RNVC: 1

21 Jun 2005

5340-27-023-4307
Mounting Bracket

270234307
06467: RNCC: 2 | RNVC: 1

30 Jun 2004

5340-27-022-0465
Handle Grip

270220465
1009 1IS 0068A-8: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-004-5122
Access Cover

270045122
10121YK5274: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-040-2538
Mending Plate

270402538
7782067517: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-020-9489
Mending Plate

270209489
1010FG-0000762: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-1692
Mounting Bracket

270491692
S01 001 0001 1650 014 F 02.M: RNCC: 2 | RNVC: 1

9 Apr 2010

5340-27-022-9425
Flush Catch Claw

270229425
3.02.08.11: RNCC: 2 | RNVC: 1

7 May 2004

5340-27-024-7739
Mounting Bracket

270247739
062010306: RNCC: 2 | RNVC: 1

1 Dec 2004

5340-27-017-4945
Access Cover

270174945
3.03.10.04: RNCC: 2 | RNVC: 1

2 Jul 2003

5340-27-017-1641
Handle Grip

270171641
58RS103566: RNCC: 2 | RNVC: 1

23 May 2003

5340-27-015-0442
Loop Clamp

270150442
7997717: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-036-8261
Bow Handle

270368261
40.270.3055: RNCC: 2 | RNVC: 1
40.270.3055: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-020-4064
Angle Bracket

270204064
98013945: RNCC: 2 | RNVC: 1

5 Dec 2003

5340-27-056-4627
Mending Plate

270564627
203228: RNCC: 2 | RNVC: 2

2 Apr 2012

5340-27-055-6952
Access Cover

270556952
87573793: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-053-8022
Mending Plate

270538022
C173-100020: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-27-040-2551
Mending Plate

270402551
8200268139: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-019-1132
Mounting Bracket

270191132
70800613: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-7595
Mending Plate

270187595
0431017-2: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-053-9924
Mending Plate

270539924
98014297: RNCC: 2 | RNVC: 2

14 Jul 2011

5340-27-020-8968
Mounting Bracket

270208968
1009.1KI.0264-2*2-10.2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-1741
Access Cover

270211741
1010FG-0800615: RNCC: 2 | RNVC: 1
1010FG-0800615: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-9486
Mending Plate

270209486
1010FG-0000759: RNCC: 2 | RNVC: 1

15 Dec 2003

Load More Results