What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 18 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 18 of 53

5340-27-058-4317
Lock-Release Lever

270584317
5340-TJ1-10295: RNCC: 2 | RNVC: 1

30 Jan 2013

5340-27-056-7306
Mounting Bracket

270567306
ADOP-SHELTER-380-B: RNCC: 2 | RNVC: 1

4 May 2012

5340-27-007-3359
Access Cover

270073359
14575: RNCC: 2 | RNVC: 1

19 Oct 1999

5340-27-056-8631
Mending Plate

270568631
202861: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-025-4137
Loop Clamp

270254137
MS21919DG10: RNCC: 2 | RNVC: 1

14 Mar 2005

5340-27-005-9919
Rod Retainer Clip

270059919
E890281S71: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-27-053-9158
Mending Plate

270539158
98019108: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-27-048-3047
Mounting Bracket

270483047
79A01-59638-AA: RNCC: 2 | RNVC: 1

28 Jan 2010

5340-27-054-6080
Mounting Bracket

270546080
98016804: RNCC: 2 | RNVC: 2

30 Sep 2011

5340-27-027-0827
Loop Clamp

270270827
MR300294: RNCC: 2 | RNVC: 1

1 Sep 2005

5340-27-050-3892
Mending Plate

270503892
108742: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-049-9785
Bow Handle

270499785
7700430574: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-056-7152
Loop Clamp

270567152
52RS030835: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-021-2148
Mounting Bracket

270212148
1012.1HSCA.03-48: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-042-9552
Hinge Torsion Bar

270429552
40.270.7214: RNCC: 2 | RNVC: 1
40.270.7214: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-004-5142
Access Cover

270045142
10121YK5426: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-026-7493
Rod Retainer Clip

270267493
3T1616828AA: RNCC: 2 | RNVC: 1

27 Jul 2005

5340-27-046-3893
Bridge Clamp

270463893
MTC1078-L: RNCC: 2 | RNVC: 1

4 Aug 2009

5340-27-006-9526
Mounting Bracket

270069526
91AG A044B46 AC: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-053-2389
Mounting Bracket

270532389
740.06.10.02.028: RNCC: 2 | RNVC: 2

11 Apr 2011

5340-27-032-6293
Mounting Bracket

270326293
13D05-16600-AA: RNCC: 2 | RNVC: 1

25 Aug 2006

5340-27-043-1295
Angle Bracket

270431295
TMS-P304-09: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-27-001-2979
Loop Clamp

270012979
205-030-702-021: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-058-0074
Mounting Bracket

270580074
90015-PH1-013: RNCC: 2 | RNVC: 1

29 Nov 2012

5340-27-014-4745
Handle Grip

270144745
115638: RNCC: 2 | RNVC: 1
115638: RNCC: 2 | RNVC: 1

15 Mar 2002

5340-27-032-3649
Expansion Shield

270323649
ALCIPAN, 10MM: RNCC: 2 | RNVC: 1
10 MM: RNCC: 2 | RNVC: 1
18005: RNCC: 2 | RNVC: 1

28 Jun 2006

5340-27-053-2152
Loop Clamp

270532152
OPTK 40: RNCC: 5 | RNVC: 9

8 Apr 2011

5340-27-059-6246
Access Cover

270596246
VOE16012031: RNCC: 3 | RNVC: 2
VOE16012031: RNCC: 3 | RNVC: 2

18 Sep 2013

5340-27-057-2012
Expansion Shield

270572012
DA0000768: RNCC: 5 | RNVC: 9
CELIK DUBEL 10 CM: RNCC: 5 | RNVC: 9

2 Jul 2012

5340-27-049-2087
Angle Bracket

270492087
105912: RNCC: 3 | RNVC: 2

13 Apr 2010

5340-27-057-9778
Mounting Bracket

270579778
7B76871: RNCC: 2 | RNVC: 1

23 Nov 2012

5340-27-022-6903
Mending Plate

270226903
40G7 10: RNCC: 2 | RNVC: 1

8 Apr 2004

5340-27-020-5024
Mounting Bracket

270205024
10131YS1603: RNCC: 2 | RNVC: 1

10 Dec 2003

5340-27-014-0371
Bridge Clamp

270140371
2T14 5488 AC: RNCC: 2 | RNVC: 1

3 Sep 2002

5340-27-055-8330
Angle Bracket

270558330
901-DS-93: RNCC: 2 | RNVC: 1

9 Jan 2012

5340-27-058-5529
Mending Plate

270585529
37711-25301: RNCC: 5 | RNVC: 9

20 Feb 2013

5340-27-004-7921
Retaining Strap

270047921
10091YD5036: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-051-4089
Mending Plate

270514089
104675: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-006-8235
Mounting Bracket

270068235
NTC3680-L: RNCC: 2 | RNVC: 1

17 May 1999

5340-27-021-0343
Mounting Bracket

270210343
1009.1KI.0353-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-3348
Mounting Bracket

270223348
20C0130-1: RNCC: 2 | RNVC: 1

25 Feb 2004

5340-27-034-6100
Mounting Bracket

270346100
121C22: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-054-6720
Mounting Bracket

270546720
55RS560235: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-052-6503
Utility Access Door

270526503
SEKSIYONEL KAPI 400X350 CM: RNCC: 2 | RNVC: 1

14 Feb 2011

5340-27-019-1425
Mounting Bracket

270191425
81303090013: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-043-0025
Mounting Bracket

270430025
40.626.0100: RNCC: 2 | RNVC: 1
40.626.0100: RNCC: 2 | RNVC: 1

24 Sep 2008

5340-27-017-3813
Access Cover

270173813
1009.1IS.0061-4C: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-043-5061
Mounting Bracket

270435061
0176-252: RNCC: 2 | RNVC: 1

17 Nov 2008

5340-27-010-2346
Mounting Bracket

270102346
98012643: RNCC: 2 | RNVC: 1

16 Nov 2001

5340-27-036-9193
Lock-Release Lever

270369193
2.HIBM-3D-563: RNCC: 2 | RNVC: 1

5 Jul 2007

5340-27-007-1823
Access Cover

270071823
E 852043 S: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-035-9456
Handle Grip

270359456
735378431: RNCC: 2 | RNVC: 1

11 Apr 2007

5340-27-025-0430
Bridge Clamp

270250430
10131YC0086/F-1137: RNCC: 2 | RNVC: 1

28 Dec 2004

5340-27-015-0483
Angle Bracket

270150483
1010FK-1811458-1: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-027-8476
Bridge Clamp

270278476
72A48-73802-AA: RNCC: 2 | RNVC: 1

10 Nov 2005

5340-27-026-0061
Access Cover

270260061
204-010-456-3: RNCC: 2 | RNVC: 1

17 May 2005

5340-27-001-7373
Lock Spindle

270017373
TM55-1520-210-2204-080-485-1: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-028-2564
Mounting Bracket

270282564
65178: RNCC: 2 | RNVC: 1

16 Dec 2005

5340-27-052-3085
Mending Plate

270523085
105601: RNCC: 3 | RNVC: 2

4 Jan 2011

5340-27-020-2263
Mounting Bracket

270202263
5121T: RNCC: 2 | RNVC: 1

18 Nov 2003

5340-27-050-6122
Mounting Bracket

270506122
114F46: RNCC: 2 | RNVC: 1

10 Aug 2010

5340-27-000-4253
Pelican Hook

270004253
S27 A3: RNCC: 3 | RNVC: 2

10 Mar 1984

5340-27-036-4326
Bridge Clamp

270364326
3C465270AA: RNCC: 2 | RNVC: 1

5 Jun 2007

5340-27-022-9542
Clevis And U-Bolt

270229542
05001FC0010: RNCC: 2 | RNVC: 1

7 May 2004

5340-27-052-8043
Mending Plate

270528043
75 32 608 32R: RNCC: 2 | RNVC: 2

25 Feb 2011

5340-27-051-1066
Mending Plate

270511066
101429: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-045-1951
Mending Plate

270451951
MB092154: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-27-024-6880
Loop Clamp

270246880
05001FK0224: RNCC: 2 | RNVC: 1

26 Nov 2004

5340-27-042-7361
Flush Catch Claw

270427361
1010006230: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-034-1058
Mounting Bracket

270341058
2ABEP00043: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-040-3933
Mounting Bracket

270403933
2ABEP00502: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-045-7512
Angle Bracket

270457512
10029191: RNCC: 2 | RNVC: 1

10 Jun 2009

5340-27-048-1234
Mounting Bracket

270481234
12E02-55620-AA: RNCC: 2 | RNVC: 1

7 Jan 2010

5340-27-013-3915
Catch Strike

270133915
7702128494: RNCC: 2 | RNVC: 1
7702128494: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-043-6453
Mounting Bracket

270436453
YS 01 03 06: RNCC: 3 | RNVC: 2

28 Nov 2008

5340-27-055-5268
Mending Plate

270555268
202246: RNCC: 2 | RNVC: 2

9 Dec 2011

5340-27-038-7351
Mounting Bracket

270387351
98000555: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-050-0734
Mending Plate

270500734
108314: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-056-3434
Access Cover

270563434
3831695: RNCC: 2 | RNVC: 2

15 Mar 2012

5340-27-020-7594
Flush Catch Claw

270207594
A-8: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-052-2001
Bridge Clamp

270522001
8.216.000.342.0: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-27-010-2773
Mounting Bracket

270102773
938636-1: RNCC: 2 | RNVC: 1
938636-1: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-009-4075
Access Cover

270094075
10131YK0197: RNCC: 2 | RNVC: 1

28 Jun 2001

5340-27-054-7453
Mending Plate

270547453
202232: RNCC: 2 | RNVC: 2

12 Oct 2011

5340-27-015-7290
Butt Hinge

270157290
16001DM0011: RNCC: 2 | RNVC: 1
16001DM0011: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-039-3947
Mounting Bracket

270393947
10025631: RNCC: 2 | RNVC: 1

29 Nov 2007

5340-27-028-8372
Mounting Bracket

270288372
MB431942: RNCC: 2 | RNVC: 1

10 Feb 2006

5340-27-050-8492
Access Cover

270508492
63D-42610-30-4D: RNCC: 3 | RNVC: 2
63D-42610-30-4D: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-053-9041
Mounting Bracket

270539041
H346035401: RNCC: 2 | RNVC: 1

5 Jul 2011

5340-27-006-9499
Mounting Bracket

270069499
P94AT A250K49 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-056-8159
Mending Plate

270568159
203621: RNCC: 2 | RNVC: 1

15 May 2012

5340-27-028-6989
Mending Plate

270286989
MR133208: RNCC: 2 | RNVC: 1

31 Jan 2006

5340-27-040-2533
Mending Plate

270402533
8200142095: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-040-7414
Mortise Lock

270407414
CEKMECE KILIDI: RNCC: 2 | RNVC: 1
KILIT, CEKMECE: RNCC: 2 | RNVC: 1
138: RNCC: 2 | RNVC: 1
KARTEX DOLAP KILIDI: RNCC: 2 | RNVC: 1
CEKMECE KILIDI,KARE: RNCC: 2 | RNVC: 1
CEKMECE KILIDI: RNCC: 2 | RNVC: 1
CEKMECE KILIDI,138(22): RNCC: 2 | RNVC: 1
CEKMECE KILIDI: RNCC: 2 | RNVC: 1
KARE TABANLI KILIT: RNCC: 3 | RNVC: 1

12 Mar 2008

5340-27-052-2576
Mounting Bracket

270522576
INS8: RNCC: 2 | RNVC: 2

30 Dec 2010

5340-27-057-3998
Mending Plate

270573998
020022010200: RNCC: 2 | RNVC: 1

31 Jul 2012

5340-27-057-6094
Mounting Bracket

270576094
ALTFC01269: RNCC: 2 | RNVC: 1

12 Sep 2012

5340-27-046-7028
Utility Access Door

270467028
3800X2500MM ALUMINYUM DOGRAMA: RNCC: 2 | RNVC: 1

1 Oct 2009

5340-27-032-6834
Mounting Bracket

270326834
13C00-16545-AA: RNCC: 2 | RNVC: 1

7 Sep 2006

5340-27-036-3890
Expansion Plug

270363890
3583447: RNCC: 2 | RNVC: 1

30 May 2007

5340-27-050-3873
Mending Plate

270503873
105330: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-023-4546
Access Cover

270234546
1010FK-1803431: RNCC: 2 | RNVC: 1

1 Jul 2004

5340-27-044-2847
Mounting Bracket

270442847
12E01-55376-AA: RNCC: 2 | RNVC: 1

22 Jan 2009

5340-27-042-1954
Utility Access Door

270421954
100X200 DEMIR KAPI: RNCC: 2 | RNVC: 1

25 Jul 2008

5340-27-045-9310
Loop Clamp

270459310
8A4801020: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-005-3049
Loop Clamp

270053049
GYKP-0001: RNCC: 3 | RNVC: 2

14 Jun 1997

5340-27-024-3000
Strap End Clip

270243000
5340-TJ-02786: RNCC: 2 | RNVC: 1

9 Oct 2004

5340-27-041-5022
Mending Plate

270415022
99436907: RNCC: 2 | RNVC: 1

29 May 2008

5340-27-050-8690
Mounting Bracket

270508690
63D-43112-00-4D: RNCC: 3 | RNVC: 2
63D-43112-00-4D: RNCC: 3 | RNVC: 2

6 Sep 2010

5340-27-045-8945
Mounting Bracket

270458945
1234: RNCC: 2 | RNVC: 1

18 Jun 2009

5340-27-053-9706
Mending Plate

270539706
98017315: RNCC: 2 | RNVC: 2

12 Jul 2011

5340-27-019-7823
Access Cover

270197823
00347200: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-1703
Access Cover

270051703
1010001289: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-026-0379
Mounting Bracket

270260379
7369864: RNCC: 2 | RNVC: 1

25 May 2005

5340-27-041-5919
Mending Plate

270415919
7253383: RNCC: 2 | RNVC: 1

5 Jun 2008

5340-27-040-5662
Access Cover

270405662
10121YK0598: RNCC: 2 | RNVC: 1

30 Jan 2008

5340-27-054-0270
Mounting Bracket

270540270
55RS451218: RNCC: 2 | RNVC: 1

18 Jul 2011

5340-27-025-9855
Mounting Bracket

270259855
16001DM0015: RNCC: 2 | RNVC: 1

16 May 2005

5340-27-041-4042
Utility Access Door

270414042
86X215 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-025-2845
Loop Clamp

270252845
5001767132: RNCC: 2 | RNVC: 1

17 Feb 2005

5340-27-048-6748
Bail Handle

270486748
DOLAP KULPU,42MM: RNCC: 2 | RNVC: 1

18 Feb 2010

5340-27-024-5955
Mounting Bracket

270245955
1010FK-0000158: RNCC: 2 | RNVC: 1

13 Nov 2004

5340-27-044-3355
Mounting Bracket

270443355
12E00-03543-AA: RNCC: 2 | RNVC: 1

28 Jan 2009

5340-27-017-8295
Mounting Bracket

270178295
6009-0532-8047: RNCC: 2 | RNVC: 1

17 Sep 2003

5340-27-021-0542
Mending Plate

270210542
1010FK-0000148: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-0908
Mending Plate

270590908
98022858: RNCC: 2 | RNVC: 1

23 May 2013

5340-27-048-9629
Mending Plate

270489629
103658: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-021-0329
Mounting Bracket

270210329
1009.1KI.0351-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-006-8981
Mounting Bracket

270068981
A 356 583 00 41: RNCC: 2 | RNVC: 1

22 Jun 1999

5340-27-028-7745
Mounting Bracket

270287745
884-5800-976: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-024-3072
Mounting Bracket

270243072
1010FG-F1320060: RNCC: 2 | RNVC: 1

9 Oct 2004

5340-27-032-4647
Mending Plate

270324647
3547T: RNCC: 2 | RNVC: 1

19 Jul 2006

5340-27-020-9132
Mounting Bracket

270209132
05001FK0060: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-004-7994
Access Cover

270047994
10091YK5151: RNCC: 3 | RNVC: 2

6 Nov 1996

5340-27-008-9286
Access Door Hinge

270089286
98005193: RNCC: 2 | RNVC: 1

22 Feb 2001

5340-27-019-6244
Butt Hinge

270196244
05001HM0060: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-034-6114
Mounting Bracket

270346114
533A04: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-008-2461
Mounting Bracket

270082461
98000699: RNCC: 2 | RNVC: 1

24 Aug 2000

5340-27-048-3254
Mounting Bracket

270483254
302723: RNCC: 2 | RNVC: 1

29 Jan 2010

5340-27-038-9838
Angle Bracket

270389838
901-KT-194: RNCC: 2 | RNVC: 1

7 Nov 2007

5340-27-058-7399
Angle Bracket

270587399
901-HP-65: RNCC: 2 | RNVC: 1

27 Mar 2013

5340-27-050-1575
Mending Plate

270501575
108061: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-051-0300
Access Cover

270510300
40X40X40: RNCC: 3 | RNVC: 2

27 Sep 2010

5340-27-027-0048
Support Hook

270270048
2ABMK01677: RNCC: 2 | RNVC: 1

18 Aug 2005

5340-27-020-7542
Mounting Bracket

270207542
1009.1KI.0105-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-0980
Mending Plate

270280980
72A48-60106-AA: RNCC: 2 | RNVC: 1

1 Dec 2005

5340-27-058-5280
Barrel Bolt

270585280
CH79188: RNCC: 3 | RNVC: 2
CH79188: RNCC: 3 | RNVC: 2

18 Feb 2013

5340-27-054-5977
Mounting Bracket

270545977
55RS752938: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-036-8243
Bridge Clamp

270368243
40.632.0110: RNCC: 2 | RNVC: 1
40.632.0110: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-021-4292
Angle Bracket

270214292
1010FK-3505347: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-040-3511
Mounting Bracket

270403511
2ABEP00517: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-034-7814
Flush Catch

270347814
13C00-08656-AB: RNCC: 2 | RNVC: 1

8 Feb 2007

5340-27-019-7358
Mounting Bracket

270197358
WQ483403A: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-024-6507
Expansion Shield

270246507
5340DUBE9880004: RNCC: 2 | RNVC: 1

24 Nov 2004

5340-27-018-6987
Mounting Bracket

270186987
1010FK-2810679: RNCC: 2 | RNVC: 1
1010FK-2810679: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-013-1110
Loop Clamp

270131110
25121T: RNCC: 2 | RNVC: 1
81.97420.0073: RNCC: 2 | RNVC: 1
90464-20005-00: RNCC: 2 | RNVC: 1

26 Apr 2002

5340-27-043-7814
Mounting Bracket

270437814
1003: RNCC: 2 | RNVC: 1

16 Dec 2008

5340-27-051-4144
Mending Plate

270514144
108591: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-022-6890
Loop Clamp

270226890
1715 23: RNCC: 2 | RNVC: 1

8 Apr 2004

5340-27-005-1517
Retaining Strap

270051517
1010000442: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-035-9838
Catch Strike

270359838
46790825: RNCC: 2 | RNVC: 1

16 Apr 2007

5340-27-028-1627
Mechanical Stop

270281627
840818: RNCC: 2 | RNVC: 1

8 Dec 2005

5340-27-006-9413
Mounting Bracket

270069413
P95AT A04504 AA: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-057-5059
Flush Catch

270575059
901-TT-386: RNCC: 2 | RNVC: 1

16 Aug 2012

5340-27-043-5760
Key Holder

270435760
METAL: RNCC: 2 | RNVC: 1

24 Nov 2008

5340-27-040-5005
Mounting Bracket

270405005
1010FK-1811388: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-022-0453
Mending Plate

270220453
1009 1IS 0068A-17: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-004-3237
Access Cover

270043237
05001YK0156: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-048-9657
Mending Plate

270489657
103697: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-017-3664
Mending Plate

270173664
1009.1IS.0092: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-024-1982
Mounting Bracket

270241982
1010FG-1831163-1: RNCC: 2 | RNVC: 1

29 Sep 2004

5340-27-043-5132
Bumper

270435132
RESIM NO:3195-4: RNCC: 2 | RNVC: 1

17 Nov 2008

5340-27-024-9460
Compression Cup

270249460
KP25-K: RNCC: 2 | RNVC: 1
R1-R2 KP25-K: RNCC: 5 | RNVC: 9

18 Dec 2004

5340-27-058-0880
Mounting Bracket

270580880
1010FMA-1802801-1: RNCC: 2 | RNVC: 1

7 Dec 2012

5340-27-055-2038
Mounting Bracket

270552038
UG 025000 POZ-8: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-041-9452
Mounting Bracket

270419452
2-002-003: RNCC: 1 | RNVC: 2

2 Jul 2008

5340-27-038-5692
Mending Plate

270385692
MB025126: RNCC: 2 | RNVC: 1

17 Oct 2007

5340-27-026-9781
Access Cover

270269781
1010FG-1801298: RNCC: 2 | RNVC: 1

16 Aug 2005

5340-27-023-0539
Mounting Bracket

270230539
1009 1MK 0014: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-021-3102
Mending Plate

270213102
1012.1HSCA.02-32: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-009-8674
Rim Lock

270098674
140X87 MM: RNCC: 2 | RNVC: 1

24 Sep 2001

5340-27-038-6940
Bow Handle

270386940
7701206627: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-044-8959
Bow Handle

270448959
735442211: RNCC: 3 | RNVC: 2

19 Mar 2009

5340-27-021-2122
Mounting Bracket

270212122
1012.1HSCA.02-54: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-043-0232
Angle Bracket

270430232
40.780.4003: RNCC: 2 | RNVC: 1
40.780.4003: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-049-1600
Mending Plate

270491600
7700718237: RNCC: 3 | RNVC: 2

8 Apr 2010

5340-27-049-4858
Mending Plate

270494858
108636: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-013-0095
Angle Bracket

270130095
THPB00121-120: RNCC: 2 | RNVC: 1

10 Apr 2002

5340-27-019-5139
Access Cover

270195139
07002YU0001: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-1751
Mending Plate

270541751
98020628: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-020-0035
Mounting Bracket

270200035
00312000: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-014-9270
Caster Wheel

270149270
2630-31968-00010: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-021-5172
Mounting Bracket

270215172
E-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-034-6119
Mounting Bracket

270346119
336E36: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-038-7424
Mounting Bracket

270387424
4150749: RNCC: 2 | RNVC: 1

30 Oct 2007

5340-27-044-0334
Utility Access Door

270440334
800X1900MM,PVC: RNCC: 2 | RNVC: 1

29 Dec 2008

5340-27-013-2290
Expansion Plug

270132290
1010003171: RNCC: 2 | RNVC: 1

16 May 2002

5340-27-034-6121
Mounting Bracket

270346121
536A06: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-008-1683
Handle Grip

270081683
27716: RNCC: 2 | RNVC: 1

28 Jul 2000

5340-27-023-9433
Mounting Bracket

270239433
7596943: RNCC: 2 | RNVC: 1

24 Aug 2004

5340-27-021-1579
Mounting Bracket

270211579
1009.1KI.0030-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-3093
Mending Plate

270213093
1012.1HSCA.03-28: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-040-5619
Filler Opening Cap

270405619
58RS503020: RNCC: 2 | RNVC: 1

30 Jan 2008

5340-27-005-6011
Mechanical Stop

270056011
70VB-7B520-CA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-058-2733
Mending Plate

270582733
MM-7490-0080: RNCC: 2 | RNVC: 1

2 Jan 2013

5340-27-015-1987
Caster Wheel

270151987
10121HT0176: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-019-0005
Mounting Bracket

270190005
821056: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-020-0044
Mounting Bracket

270200044
03031900: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-044-1368
Access Cover

270441368
AMJP24H7: RNCC: 2 | RNVC: 1

12 Jan 2009

5340-27-048-7699
Loop Clamp

270487699
9034-93: RNCC: 2 | RNVC: 1
9034-93: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-058-0381
Mending Plate

270580381
CV72208: RNCC: 2 | RNVC: 1

4 Dec 2012

5340-27-037-3155
Flush Lock

270373155
3201.04.0087: RNCC: 2 | RNVC: 1
KILIT MEKANIZMASI: RNCC: 5 | RNVC: 9

23 Jul 2007

5340-27-026-2613
Mounting Bracket

270262613
1010FG-2963022: RNCC: 2 | RNVC: 1

23 Jun 2005

5340-27-054-7173
Mending Plate

270547173
98022692: RNCC: 2 | RNVC: 2

10 Oct 2011

5340-27-005-1689
Access Cover

270051689
1010002412: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-056-5544
Loop Clamp

270565544
3831549: RNCC: 2 | RNVC: 2

10 Apr 2012

5340-27-024-5630
Flush Catch Claw

270245630
07002YT0616: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-017-3645
Mending Plate

270173645
1009.1IS.0069: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-025-4838
Mounting Bracket

270254838
1010FG-1800042: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-049-7517
Access Cover

270497517
AR532T612000000: RNCC: 2 | RNVC: 1

26 May 2010

5340-27-005-1753
Loop Clamp

270051753
1010002437: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-012-1751
Angle Bracket

270121751
10131YB0755: RNCC: 2 | RNVC: 1

17 Jan 2002

5340-27-053-0927
Mending Plate

270530927
103702: RNCC: 3 | RNVC: 2

25 Mar 2011

5340-27-008-6446
Filler Opening Cap

270086446
2K63922: RNCC: 2 | RNVC: 1

6 Dec 2000

5340-27-016-7189
Access Cover

270167189
98012926-1: RNCC: 2 | RNVC: 1

4 Mar 2003

5340-27-053-3708
Expansion Shield

270533708
242875: RNCC: 2 | RNVC: 1

25 Apr 2011

5340-27-058-7613
Mounting Bracket

270587613
55RS752734: RNCC: 2 | RNVC: 1

28 Mar 2013

5340-27-038-8592
Mounting Bracket

270388592
2ABEP00254: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-006-8889
Mounting Bracket

270068889
A 436 545 01 40: RNCC: 2 | RNVC: 1

11 Jun 1999

5340-27-043-1383
Mounting Bracket

270431383
Y532-66004-206: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-27-011-4736
Mounting Bracket

270114736
99999-NIIN-DA0153245: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-025-9251
Mounting Bracket

270259251
1010FG-1808639: RNCC: 2 | RNVC: 1

3 May 2005

5340-27-042-8100
Coat And Hat Hook

270428100
METAL ASKI: RNCC: 2 | RNVC: 1
METAL ASKI: RNCC: 2 | RNVC: 1
GORAL 017: RNCC: 2 | RNVC: 1

12 Sep 2008

5340-27-050-3895
Mending Plate

270503895
108859: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-042-8397
Catch Strike

270428397
8200347712: RNCC: 2 | RNVC: 1

15 Sep 2008

5340-27-015-0375
Loop Clamp

270150375
7384968: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-034-0654
Mounting Bracket

270340654
13C00-08374-AA: RNCC: 2 | RNVC: 1

7 Dec 2006

5340-27-020-9967
Flush Catch

270209967
05001DK0187: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-045-0040
Mounting Bracket

270450040
805-5800-681: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-27-018-6760
Mounting Bracket

270186760
1010FG-1801379: RNCC: 2 | RNVC: 1
1010FK-1801379: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-7448
Mending Plate

270547448
202738: RNCC: 2 | RNVC: 2

12 Oct 2011

5340-27-057-9839
Mounting Bracket

270579839
1010FMA-3505047: RNCC: 2 | RNVC: 1

26 Nov 2012

5340-27-036-2377
Sliding Door Track

270362377
3C46E513A13BB: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-042-5687
Mending Plate

270425687
54556022: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-048-0949
Bow Handle

270480949
7700430574: RNCC: 3 | RNVC: 2

6 Jan 2010

5340-27-045-5563
Bail Handle

270455563
400500133100: RNCC: 2 | RNVC: 2

14 May 2009

5340-27-047-5936
Mending Plate

270475936
13C35-16747-AA: RNCC: 2 | RNVC: 1

10 Dec 2009

5340-27-014-8299
Bridge Clamp

270148299
7700703940: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-006-7372
Elbow Catch

270067372
2K59715: RNCC: 2 | RNVC: 1

20 Apr 1999

5340-27-028-8037
Flush Lock

270288037
KONT. SOL: RNCC: 2 | RNVC: 1

8 Feb 2006

5340-27-038-5760
Mending Plate

270385760
5.01.07.15: RNCC: 2 | RNVC: 1

18 Oct 2007

5340-27-015-0487
Angle Bracket

270150487
1010FK-1811460: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-042-8528
Catch Strike

270428528
7700434689: RNCC: 2 | RNVC: 1

16 Sep 2008

5340-27-037-7394
Mounting Bracket

270377394
83A11-59864-AA: RNCC: 2 | RNVC: 1

23 Aug 2007

5340-27-048-7351
Loop Clamp

270487351
7291-13: RNCC: 2 | RNVC: 1
7291-13: RNCC: 5 | RNVC: 9

24 Feb 2010

5340-27-054-5668
Support Hook

270545668
25543020: RNCC: 3 | RNVC: 2

26 Sep 2011

5340-27-054-4263
Mending Plate

270544263
98019895: RNCC: 3 | RNVC: 2

9 Sep 2011

5340-27-038-7355
Mounting Bracket

270387355
10091YB0039: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-007-7679
Escutcheon Plate

270077679
10131YP0061: RNCC: 2 | RNVC: 1

11 Feb 2000

5340-27-048-4164
Bow Handle

270484164
300599: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-27-032-9491
Mounting Bracket

270329491
4323147: RNCC: 2 | RNVC: 1

2 Oct 2006

5340-27-018-3392
Mending Plate

270183392
10121YK5533: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-7653
Mending Plate

270057653
10131YB0550: RNCC: 3 | RNVC: 2

26 Jan 1998

5340-27-004-5553
Access Cover

270045553
10091YK5016: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-041-6065
Mounting Bracket

270416065
2ABEP00691: RNCC: 2 | RNVC: 1

6 Jun 2008

5340-27-021-5011
Mounting Bracket

270215011
1009.1KI.0303-6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-1967
Catch Strike

270201967
7700756701: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-035-8177
Handle Grip

270358177
82490942: RNCC: 2 | RNVC: 1

30 Mar 2007

5340-27-041-6495
Bow Handle

270416495
7253779: RNCC: 2 | RNVC: 1

10 Jun 2008

5340-27-014-8335
Bow Handle

270148335
7702253141: RNCC: 2 | RNVC: 1
8200081864: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-056-4805
Mending Plate

270564805
202241: RNCC: 2 | RNVC: 2

3 Apr 2012

5340-27-024-9458
Compression Cup

270249458
KP16: RNCC: 2 | RNVC: 1
R1-R2 KP16: RNCC: 5 | RNVC: 9

18 Dec 2004

5340-27-011-4857
Access Cover

270114857
7335710783: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-035-0647
Mending Plate

270350647
83623016001: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-021-1738
Angle Bracket

270211738
1010FG-0612203: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-7461
Access Cover

270587461
10 V02 113 02: RNCC: 2 | RNVC: 1

28 Mar 2013

5340-27-017-3626
Mending Plate

270173626
1009.1IS.0058-17: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-051-4102
Mending Plate

270514102
105803: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-052-6963
Catch Strike

270526963
65 62 000 18R: RNCC: 2 | RNVC: 2

16 Feb 2011

5340-27-058-8681
Access Cover

270588681
VOE12740446: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-27-058-9239
Mounting Bracket

270589239
6R4ZLD18210102: RNCC: 5 | RNVC: 9

30 Apr 2013

5340-27-043-0161
Mounting Bracket

270430161
40.624.0182: RNCC: 2 | RNVC: 1
40.624.0182: RNCC: 2 | RNVC: 1

24 Sep 2008

5340-27-042-8825
Catch Strike

270428825
7700303209: RNCC: 2 | RNVC: 1

17 Sep 2008

5340-27-005-1679
Access Cover

270051679
1010002221: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-048-3735
Mounting Bracket

270483735
5421592: RNCC: 2 | RNVC: 1

4 Feb 2010

5340-27-058-9258
Furniture Cup

270589258
0011355009: RNCC: 2 | RNVC: 1

30 Apr 2013

5340-27-048-9639
Mending Plate

270489639
103670: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-051-6997
Handle Grip

270516997
3BA-39-31210: RNCC: 3 | RNVC: 2

22 Nov 2010

5340-27-049-9679
Mending Plate

270499679
HD1000A1: RNCC: 2 | RNVC: 2
HD1000A1: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-007-9981
Access Cover

270079981
DZMA000200: RNCC: 2 | RNVC: 1
DZMA000200: RNCC: 2 | RNVC: 1

22 May 2000

5340-27-053-4735
Mending Plate

270534735
6040-2337-3007: RNCC: 2 | RNVC: 2

10 May 2011

5340-27-018-6416
Mounting Bracket

270186416
1010FG-0401337: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-011-2435
Butt Hinge

270112435
07002YM0308: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-058-5737
Ball Socket Seat

270585737
CH55119: RNCC: 3 | RNVC: 2
CH55119: RNCC: 3 | RNVC: 2

22 Feb 2013

5340-27-013-3923
Bow Handle

270133923
7700750049: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-014-7547
Truss Fairlead

270147547
505112000: RNCC: 2 | RNVC: 1

26 Nov 2002

5340-27-045-7520
Angle Bracket

270457520
10029197: RNCC: 2 | RNVC: 1

10 Jun 2009

5340-27-054-3642
Mending Plate

270543642
98021388: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-058-6873
Mending Plate

270586873
ADOP-SHELTER-280-SM: RNCC: 2 | RNVC: 1

14 Mar 2013

5340-27-024-2884
Expansion Plug

270242884
57RS300413: RNCC: 2 | RNVC: 1

8 Oct 2004

5340-27-045-4018
Handle Grip

270454018
58RS175358: RNCC: 2 | RNVC: 1

6 May 2009

5340-27-013-2444
Loop Clamp

270132444
53407777700023: RNCC: 2 | RNVC: 1

20 May 2002

5340-27-055-6877
Mounting Bracket

270556877
55RS551823: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-043-8945
Utility Access Door

270438945
100X195 CM KAPI, ALUMINYUM: RNCC: 2 | RNVC: 1

22 Dec 2008

5340-27-058-2181
Expansion Plug

270582181
95011-63000: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-024-1469
Mounting Bracket

270241469
2ABMK 00616: RNCC: 2 | RNVC: 1

22 Sep 2004

5340-27-029-1514
Catch Strike

270291514
7780768: RNCC: 2 | RNVC: 1

6 Mar 2006

5340-27-054-6027
Mounting Bracket

270546027
108E58: RNCC: 3 | RNVC: 2

30 Sep 2011

5340-27-036-8218
Access Cover

270368218
40.661.2026: RNCC: 2 | RNVC: 1
40.661.2026: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-034-6780
Mounting Bracket

270346780
8619928: RNCC: 2 | RNVC: 1

1 Feb 2007

5340-27-042-3698
Mortise Lock

270423698
61825: RNCC: 2 | RNVC: 1
61825: RNCC: 2 | RNVC: 1
KILIT GOBEGI: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-046-6564
Ball Socket Seat

270466564
11009498: RNCC: 2 | RNVC: 1

17 Sep 2009

5340-27-051-4892
Mending Plate

270514892
400282-002: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-27-024-5641
Butt Hinge

270245641
4 CM: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-025-6558
Mounting Bracket

270256558
1010FG-1801335: RNCC: 2 | RNVC: 1

25 Mar 2005

5340-27-008-3314
Access Cover

270083314
98005332: RNCC: 2 | RNVC: 1

19 Sep 2000

5340-27-035-5885
Mending Plate

270355885
72B04-61452-AA: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-005-1697
Access Cover

270051697
1010001058: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-057-3767
Mending Plate

270573767
020001000100: RNCC: 2 | RNVC: 1

26 Jul 2012

5340-27-054-1726
Loop Holder

270541726
40-004.00/10-127-2008: RNCC: 2 | RNVC: 1

3 Aug 2011

5340-27-020-7821
Mending Plate

270207821
1009.1KI.0340-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-1729
Loop Holder

270541729
40-005.00/10-127-2008: RNCC: 2 | RNVC: 1

3 Aug 2011

5340-27-042-5160
Flush Catch Claw

270425160
1010006223: RNCC: 2 | RNVC: 1

21 Aug 2008

5340-27-056-4758
Support Hook

270564758
021101902: RNCC: 5 | RNVC: 9

3 Apr 2012

5340-27-029-0071
Mounting Bracket

270290071
10121YP5599: RNCC: 2 | RNVC: 1

22 Feb 2006

5340-27-048-0377
Mounting Bracket

270480377
S-016: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-025-4141
Loop Clamp

270254141
EAB700-64: RNCC: 2 | RNVC: 1

14 Mar 2005

5340-27-017-3686
Pad Eye

270173686
1009.1IS.0041-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-056-8697
Mending Plate

270568697
201855: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-009-6112
Mounting Bracket

270096112
4414622: RNCC: 2 | RNVC: 1

3 Aug 2001

5340-27-042-1628
Mounting Bracket

270421628
2.HIBM-4L-592/2-12: RNCC: 2 | RNVC: 1

23 Jul 2008

5340-27-017-2343
Mending Plate

270172343
201862: RNCC: 2 | RNVC: 1
201862: RNCC: 2 | RNVC: 1

30 May 2003

5340-27-051-1095
Mending Plate

270511095
109338: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-047-6392
Bridge Clamp

270476392
A0059976290: RNCC: 2 | RNVC: 2
A0059976290: RNCC: 3 | RNVC: 2

11 Dec 2009

5340-27-057-6074
Mounting Bracket

270576074
ALTFC01293: RNCC: 2 | RNVC: 1

12 Sep 2012

5340-27-044-4109
Mending Plate

270444109
531012A02873: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-024-9456
Compression Cup

270249456
KP10: RNCC: 2 | RNVC: 1
R1-R2 KP10: RNCC: 5 | RNVC: 9

18 Dec 2004

5340-27-058-4310
Access Cover

270584310
14 V43 405 01: RNCC: 2 | RNVC: 1

30 Jan 2013

5340-27-015-0455
Loop Clamp

270150455
10903789: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-042-7404
Hand Crank

270427404
1010006265: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-021-4338
Mounting Bracket

270214338
1012.1HSCA.03-51: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-4154
Mending Plate

270514154
109239: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-054-0266
Mounting Bracket

270540266
55RS351026: RNCC: 2 | RNVC: 1

18 Jul 2011

5340-27-015-5333
Butt Hinge

270155333
11051DM0025: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-7301
Butt Hinge

270157301
16001DM0152: RNCC: 2 | RNVC: 1
GERMAN,SAG,120MM: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-011-4849
Access Cover

270114849
4566230820: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-018-7085
Mounting Bracket

270187085
1010FK-2702034: RNCC: 2 | RNVC: 1
1010FK-2702034: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-0340
Mounting Bracket

270480340
S-004: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-016-6776
Bridge Clamp

270166776
83.97440.0029: RNCC: 2 | RNVC: 1

26 Feb 2003

5340-27-054-7167
Mending Plate

270547167
98022443: RNCC: 2 | RNVC: 2

10 Oct 2011

5340-27-025-8192
Access Cover

270258192
1010FG-2204621: RNCC: 2 | RNVC: 1

14 Apr 2005

5340-27-059-2645
Mounting Bracket

270592645
55RS752985: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-021-0879
Flush Catch Claw

270210879
1010FK-1911230: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-042-6735
Mounting Bracket

270426735
ESR3293-LD: RNCC: 2 | RNVC: 1

4 Sep 2008

5340-27-020-5027
Mounting Bracket

270205027
10131YS1585: RNCC: 2 | RNVC: 1

10 Dec 2003

5340-27-025-0193
Rod End Clevis

270250193
5003636286: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-024-9490
Compression Cup

270249490
DKL 09: RNCC: 5 | RNVC: 9

21 Dec 2004

5340-27-056-3425
Mending Plate

270563425
3831833: RNCC: 2 | RNVC: 2

15 Mar 2012

5340-27-058-4519
Leakproof Seal Plug

270584519
5938682: RNCC: 2 | RNVC: 1

31 Jan 2013

5340-27-004-7966
Access Cover

270047966
10091YK5137: RNCC: 3 | RNVC: 2

6 Nov 1996

5340-27-056-8701
Mending Plate

270568701
203328: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-049-7708
Catch Strike

270497708
898029173251: RNCC: 2 | RNVC: 1

28 May 2010

5340-27-058-3835
Access Cover

270583835
37507-37800: RNCC: 5 | RNVC: 9

21 Jan 2013

5340-27-052-6344
Catch Strike

270526344
90 57 000 05R: RNCC: 2 | RNVC: 2

10 Feb 2011

5340-27-009-9437
Access Cover

270099437
98012579: RNCC: 2 | RNVC: 1

3 Jun 2004

5340-27-009-9312
Mounting Bracket

270099312
98012381: RNCC: 2 | RNVC: 1

11 Oct 2001

5340-27-046-3688
Mending Plate

270463688
NRC4966-L: RNCC: 2 | RNVC: 1

31 Jul 2009

5340-27-040-4525
Mounting Bracket

270404525
2894992-1: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-053-9219
Mending Plate

270539219
102125: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-035-6340
Mending Plate

270356340
83.62910.4026: RNCC: 2 | RNVC: 1

22 Mar 2007

5340-27-017-1884
Loop Holder

270171884
8B100356: RNCC: 2 | RNVC: 1

27 May 2003

5340-27-001-2700
Mounting Plate

270012700
102460004: RNCC: 3 | RNVC: 2

21 Jan 1994

5340-27-051-1539
Mounting Bracket

270511539
16F00-58578-AA: RNCC: 2 | RNVC: 1

7 Oct 2010

5340-27-025-4841
Mounting Bracket

270254841
1010FG-1800041: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-024-4504
Mounting Bracket

270244504
1009 1YK 0147: RNCC: 2 | RNVC: 1

28 Oct 2004

5340-27-018-6444
Mounting Bracket

270186444
1010FG-0607068: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-7168
Access Cover

270487168
7673-02: RNCC: 2 | RNVC: 1
7673-02: RNCC: 5 | RNVC: 9

23 Feb 2010

5340-27-050-1570
Mending Plate

270501570
107425: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-025-4848
Bail Handle

270254848
10091DK0514: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-029-4888
Mounting Bracket

270294888
160010005: RNCC: 2 | RNVC: 1

30 Mar 2006

5340-27-028-7853
Mounting Bracket

270287853
40007899: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-051-0746
Mounting Bracket

270510746
UZK05: RNCC: 2 | RNVC: 1

29 Sep 2010

5340-27-014-6050
Bow Handle

270146050
897856461301: RNCC: 2 | RNVC: 1

22 Oct 2003

5340-27-029-8678
Clamping Catch

270298678
006434: RNCC: 2 | RNVC: 1
006434: RNCC: 2 | RNVC: 1

1 Jun 2006

5340-27-027-9195
Mounting Bracket

270279195
M52T3011R450158: RNCC: 2 | RNVC: 1

17 Nov 2005

5340-27-014-9840
Lever Bracket

270149840
10091YP0078: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-027-8828
Mounting Bracket

270278828
1010FG-0000725: RNCC: 2 | RNVC: 1

16 Nov 2005

5340-27-056-7084
Mounting Bracket

270567084
ADOP-SHELTER-180-IAK: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-022-9079
Mounting Bracket

270229079
3.03.04.10: RNCC: 2 | RNVC: 1

4 May 2004

5340-27-036-1300
Mending Plate

270361300
3C46003K57BA: RNCC: 2 | RNVC: 1

1 May 2007

5340-27-051-1304
Mounting Bracket

270511304
16F00-66672-AA: RNCC: 2 | RNVC: 1

5 Oct 2010

5340-27-053-9700
Mending Plate

270539700
98017335: RNCC: 2 | RNVC: 2

12 Jul 2011

5340-27-053-8033
Mending Plate

270538033
C175-000060: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-27-055-2587
Utility Access Door

270552587
UG 017000 POZ-20: RNCC: 2 | RNVC: 1
UG 017000 POZ-20: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-016-6381
Mending Plate

270166381
83.41720.0502: RNCC: 2 | RNVC: 1

20 Feb 2003

5340-27-019-7753
Bridge Clamp

270197753
W4631208: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-0382
Mending Plate

270580382
CV72177: RNCC: 2 | RNVC: 1

4 Dec 2012

5340-27-008-2618
Mounting Bracket

270082618
98005121: RNCC: 2 | RNVC: 1

4 Sep 2000

5340-27-018-7060
Mounting Bracket

270187060
1010FK-2810901: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-049-8619
Mechanical Stop

270498619
KR30008AA: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-010-2602
Mending Plate

270102602
10131YS0140: RNCC: 2 | RNVC: 1

21 Nov 2001

5340-27-059-2743
Mounting Bracket

270592743
55RS753030: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-056-7468
Flush Catch

270567468
ADOP-SHELTER-180-MAT: RNCC: 2 | RNVC: 2

7 May 2012

5340-27-042-8161
Mounting Bracket

270428161
2ABEP00830: RNCC: 2 | RNVC: 1

12 Sep 2008

5340-27-042-9968
Mechanical Stop

270429968
40.624.0213: RNCC: 2 | RNVC: 1
40.624.0213: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-054-9452
Flush Catch

270549452
1493-51JU.17021: RNCC: 2 | RNVC: 1

25 Oct 2011

5340-27-017-0546
Mounting Bracket

270170546
2901422: RNCC: 2 | RNVC: 1
2941422: RNCC: 2 | RNVC: 1

12 May 2003

5340-27-014-3376
Loop Clamp

270143376
51.97401.6057: RNCC: 2 | RNVC: 1
10329T: RNCC: 2 | RNVC: 1

8 Oct 2002

5340-27-034-1557
Expansion Plug

270341557
IND10: RNCC: 2 | RNVC: 1

14 Dec 2006

5340-27-029-0801
Mounting Bracket

270290801
10121YD5419: RNCC: 2 | RNVC: 1

28 Feb 2006

5340-27-038-1638
Ball Socket Seat

270381638
20464445: RNCC: 2 | RNVC: 1

18 Sep 2007

5340-27-028-7825
Mounting Bracket

270287825
884-5810-957: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-033-6362
Access Cover

270336362
901-KK-186: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-059-6497
Loop Clamp

270596497
901-KL-336: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-051-4897
Mending Plate

270514897
400282-006: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-27-048-7698
Bridge Clamp

270487698
9034-90: RNCC: 2 | RNVC: 1
9034-90: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-048-4462
Bow Handle

270484462
6020704: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-27-023-9991
Hand Crank

270239991
10131YK2045: RNCC: 2 | RNVC: 1

4 Sep 2004

5340-27-015-0468
Angle Bracket

270150468
1010FK-1811355: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-004-7903
Access Cover

270047903
10091YK5085: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-058-2304
Loop Clamp

270582304
55RS650837: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-039-1934
Mounting Bracket

270391934
83A24-73644-AA: RNCC: 2 | RNVC: 1

16 Nov 2007

5340-27-006-6990
Elbow Catch

270066990
5K11871: RNCC: 2 | RNVC: 1

18 Mar 1999

5340-27-022-5317
Compression Cup

270225317
22575: RNCC: 2 | RNVC: 1

19 Mar 2004

5340-27-056-3383
Mounting Bracket

270563383
3837108: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-27-055-8938
Mending Plate

270558938
58RS112681: RNCC: 2 | RNVC: 1

12 Jan 2012

5340-27-013-6643
Bow Handle

270136643
88.61441.5007: RNCC: 2 | RNVC: 1

11 Jul 2002

5340-27-058-6754
Mending Plate

270586754
ADOP-SHELTER-280-IOP: RNCC: 2 | RNVC: 1

12 Mar 2013

5340-27-053-6881
Mending Plate

270536881
C172-A00010: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-27-049-5092
Bridge Clamp

270495092
108086: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-025-0910
Mounting Bracket

270250910
19473T: RNCC: 2 | RNVC: 1

3 Jan 2005

5340-27-033-8683
Butt Hinge

270338683
BOMEL: RNCC: 2 | RNVC: 1

24 Nov 2006

5340-27-042-7135
Mending Plate

270427135
7376158: RNCC: 2 | RNVC: 1

8 Sep 2008

5340-27-050-1566
Mending Plate

270501566
107419: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-058-3338
Mending Plate

270583338
5740262: RNCC: 2 | RNVC: 1

10 Jan 2013

5340-27-005-4927
Angle Bracket Set

270054927
G001-35: RNCC: 3 | RNVC: 2

16 Nov 1997

5340-27-059-2683
Mounting Bracket

270592683
55RS260154: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-059-2713
Mounting Bracket

270592713
55RS551806: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-018-6547
Mounting Bracket

270186547
1010FG-1201737: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-022-4001
Access Cover

270224001
1010005051: RNCC: 2 | RNVC: 1

5 Mar 2004

5340-27-054-7631
Access Cover

270547631
100452: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-005-1687
Access Cover

270051687
1010002535: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-038-1498
Mechanical Stop

270381498
1010FK-2702075: RNCC: 2 | RNVC: 1

17 Sep 2007

5340-27-048-9864
Mending Plate

270489864
105720: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-27-041-2756
Mending Plate

270412756
7252588: RNCC: 2 | RNVC: 1

12 May 2008

5340-27-034-9897
Bow Handle

270349897
13C00-57020-AA: RNCC: 2 | RNVC: 1

20 Feb 2007

5340-27-021-5356
Mending Plate

270215356
1010FG-0000639: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-4818
Rim Latch

270494818
MCT1221310-001: RNCC: 2 | RNVC: 1

4 May 2010

5340-27-059-5500
Angle Bracket

270595500
901-DS-112: RNCC: 2 | RNVC: 1

4 Sep 2013

5340-27-051-6385
Mending Plate

270516385
3EC-15-19280: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-27-007-8133
Handle Grip

270078133
8B75457: RNCC: 2 | RNVC: 1

24 Feb 2000

5340-27-049-9685
Mending Plate

270499685
HD110192: RNCC: 2 | RNVC: 2
HD110192: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-024-9454
Compression Cup

270249454
KP06: RNCC: 2 | RNVC: 1
R1-R2 KP06: RNCC: 5 | RNVC: 9

18 Dec 2004

5340-27-005-1807
Loop Clamp

270051807
1010002210: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-003-9209
Access Cover

270039209
07001MN0389: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-049-8477
Mending Plate

270498477
109158: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-056-3003
Filler Opening Cap

270563003
8000TE-09: RNCC: 5 | RNVC: 9

13 Mar 2012

5340-27-047-8609
Mounting Bracket

270478609
13C01-01712-AA: RNCC: 2 | RNVC: 1

21 Dec 2009

5340-27-021-1290
Mending Plate

270211290
1010FG-0000493: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-052-6951
Flush Catch

270526951
332V85-5001-07-3: RNCC: 2 | RNVC: 1

16 Feb 2011

5340-27-056-7074
Mounting Bracket

270567074
ADOP-SHELTER-180-NBC: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-041-5996
Mounting Bracket

270415996
7255651: RNCC: 2 | RNVC: 1

6 Jun 2008

5340-27-023-5153
Catch Strike

270235153
20290T: RNCC: 2 | RNVC: 1

8 Jul 2004

5340-27-047-5792
Handle Grip

270475792
ELCEK,PLASTIK: RNCC: 2 | RNVC: 1

9 Dec 2009

5340-27-051-4141
Mending Plate

270514141
108249: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-053-2926
Mounting Bracket

270532926
H341162200: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-022-4774
Mounting Bracket

270224774
89020MY1000: RNCC: 2 | RNVC: 1
89020MY1000: RNCC: 5 | RNVC: 9

13 Mar 2004

5340-27-055-7987
Access Cover

270557987
5835-1508-6: RNCC: 2 | RNVC: 2

5 Jan 2012

5340-27-004-5144
Access Cover

270045144
10121YK5434: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-044-2557
Mounting Bracket

270442557
17505-66: RNCC: 2 | RNVC: 1

20 Jan 2009

5340-27-051-2535
Access Cover

270512535
HF087: RNCC: 5 | RNVC: 9

12 Oct 2010

5340-27-055-1610
Door Holder

270551610
5945-ED-287-0060: RNCC: 2 | RNVC: 2

17 Nov 2011

5340-27-008-3310
Access Cover

270083310
98010149: RNCC: 2 | RNVC: 1

19 Sep 2000

5340-27-020-9507
Mending Plate

270209507
1010FG-0000355: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-7082
Mounting Bracket

270567082
ADOP-SHELTER-180-DVD: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-001-7410
Access Door Hinge

270017410
CESSNA-185-PART0711037-5: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-27-055-2181
Mounting Bracket

270552181
1692-0055: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-034-4334
Stand Base

270344334
500001-3: RNCC: 2 | RNVC: 1

5 Jan 2007

5340-27-053-0556
Mending Plate

270530556
105468: RNCC: 2 | RNVC: 2

22 Mar 2011

5340-27-046-3904
Mending Plate

270463904
MRC5765-L: RNCC: 2 | RNVC: 1

4 Aug 2009

5340-27-029-4722
Handle Grip

270294722
58RS504206: RNCC: 2 | RNVC: 1

29 Mar 2006

5340-27-054-6652
Mounting Bracket

270546652
55RS752981: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-056-6695
Bridge Clamp

270566695
2.HIBM-T07/19-63: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-032-6421
Access Cover

270326421
T530-G3200-000: RNCC: 2 | RNVC: 1

28 Aug 2006

5340-27-042-9940
Mounting Bracket

270429940
40.624.0110: RNCC: 2 | RNVC: 1
40.624.0110: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-058-9522
Mending Plate

270589522
CV72057: RNCC: 2 | RNVC: 1

7 May 2013

5340-27-043-2430
Mounting Bracket

270432430
VANA UCU-KAZAN: RNCC: 2 | RNVC: 2

22 Oct 2008

5340-27-020-9490
Mending Plate

270209490
1010FG-0000756: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-2729
Mending Plate

270582729
MM-7490-0077: RNCC: 2 | RNVC: 1

2 Jan 2013

5340-27-043-3687
Mounting Bracket

270433687
PK014S50LA-X7/C: RNCC: 2 | RNVC: 1

3 Nov 2008

5340-27-037-5444
Expansion Plug

270375444
46038-30K00: RNCC: 5 | RNVC: 9

6 Aug 2007

5340-27-020-8970
Mounting Bracket

270208970
1009.1KI.0144-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-019-1257
Mounting Bracket

270191257
8Y7-77225-00: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-014-5999
Catch Strike

270145999
377774544001: RNCC: 2 | RNVC: 1
387002215001: RNCC: 2 | RNVC: 1
388882747001: RNCC: 2 | RNVC: 1

12 Nov 2002

5340-27-042-9910
Mounting Bracket

270429910
40.624.0146: RNCC: 2 | RNVC: 1
40.624.0146: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-056-5459
Access Cover

270565459
3835016: RNCC: 2 | RNVC: 2

9 Apr 2012

5340-27-024-9457
Compression Cup

270249457
KP13: RNCC: 2 | RNVC: 1
R1-R2 KP13: RNCC: 5 | RNVC: 9

18 Dec 2004

5340-27-019-5781
Rod End Clevis

270195781
TWO-02-104: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-043-1966
Mounting Bracket

270431966
9-001-001: RNCC: 1 | RNVC: 2

20 Oct 2008

5340-27-045-5450
Bridge Clamp

270455450
K1C 1036: RNCC: 3 | RNVC: 2

14 May 2009

Load More Results