What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 17 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 17 of 53

5340-27-027-2771
Mounting Bracket

270272771
20-01-581-001: RNCC: 2 | RNVC: 1

22 Sep 2005

5340-27-017-0051
Angle Bracket

270170051
6040-0533-9023: RNCC: 2 | RNVC: 1

28 Apr 2003

5340-27-009-3624
Butt Hinge

270093624
MS 35-001/05: RNCC: 2 | RNVC: 1

21 Jun 2001

5340-27-055-2185
Mounting Bracket

270552185
1692-0158: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-022-2493
Expansion Plug

270222493
10121YT5620: RNCC: 2 | RNVC: 1
40DIN443PRH: RNCC: 2 | RNVC: 1

20 Feb 2004

5340-27-023-0507
Mounting Bracket

270230507
2ABM 1MK 0012: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-026-3193
Flush Catch Claw

270263193
901-YK-68-1: RNCC: 2 | RNVC: 1

29 Jun 2005

5340-27-059-0255
Access Cover

270590255
VOE27455: RNCC: 3 | RNVC: 2
VOE27455: RNCC: 3 | RNVC: 2

16 May 2013

5340-27-023-7611
Catch Strike

270237611
24123-1360: RNCC: 2 | RNVC: 1

5 Aug 2004

5340-27-057-6789
Mending Plate

270576789
T-CNC-10: RNCC: 2 | RNVC: 1

21 Sep 2012

5340-27-048-6760
Mending Plate

270486760
61301-90310-06Y: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-27-049-1161
Mounting Bracket

270491161
1010FG-1206815: RNCC: 2 | RNVC: 1

5 Apr 2010

5340-27-048-4170
Bow Handle

270484170
300726: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-27-017-0412
Angle Bracket

270170412
ASM5C-08: RNCC: 2 | RNVC: 1

8 May 2003

5340-27-029-6094
Bridge Clamp

270296094
1.HIBM-1R-1136: RNCC: 2 | RNVC: 1

20 Apr 2006

5340-27-008-2465
Mounting Bracket

270082465
98010043: RNCC: 2 | RNVC: 1

24 Aug 2000

5340-27-050-8574
Mounting Bracket

270508574
10046477: RNCC: 2 | RNVC: 1

3 Sep 2010

5340-27-050-3853
Mending Plate

270503853
105227: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-036-1419
Loop Clamp

270361419
13D05-16790-AA: RNCC: 2 | RNVC: 1

2 May 2007

5340-27-023-3045
Catch Strike

270233045
1010FG-1800030: RNCC: 2 | RNVC: 1

18 Jun 2004

5340-27-051-2966
Mounting Bracket

270512966
2.HIBM-2L-686: RNCC: 2 | RNVC: 1

14 Oct 2010

5340-27-027-4826
Flush Catch

270274826
6009-0534-1014: RNCC: 2 | RNVC: 1

6 Oct 2005

5340-27-024-2749
Mounting Bracket

270242749
73-3579-1221: RNCC: 2 | RNVC: 1

7 Oct 2004

5340-27-041-5558
Butt Hinge

270415558
51.052: RNCC: 2 | RNVC: 1
51.052: RNCC: 5 | RNVC: 9

3 Jun 2008

5340-27-021-2138
Mounting Bracket

270212138
1012.1HSCA.02-61: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-1743
Mending Plate

270541743
98020879: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-046-6791
Mounting Bracket

270466791
Y532-66023-203: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-054-1760
Mending Plate

270541760
98021967: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-028-8603
Mounting Bracket

270288603
1010005537: RNCC: 2 | RNVC: 1

13 Feb 2006

5340-27-042-1539
Bumper

270421539
M522D213300200: RNCC: 2 | RNVC: 1

22 Jul 2008

5340-27-033-6335
Access Cover

270336335
901-GK-28: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-019-7828
Mounting Bracket

270197828
05001DB0010: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-006-9002
Mounting Bracket

270069002
A 436 670 00 18: RNCC: 2 | RNVC: 1

22 Jun 1999

5340-27-058-4420
Angle Bracket

270584420
M535E661320000: RNCC: 2 | RNVC: 1

31 Jan 2013

5340-27-032-9763
Caster Wheel

270329763
KOLTEK001: RNCC: 2 | RNVC: 1
M1814PPB050010: RNCC: 2 | RNVC: 1

5 Oct 2006

5340-27-050-0719
Mending Plate

270500719
107936: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-022-3340
Mounting Bracket

270223340
901-DP-58: RNCC: 2 | RNVC: 1

25 Feb 2004

5340-27-020-1518
Loop Clamp

270201518
7703083081: RNCC: 2 | RNVC: 1
90464-25003-00: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-051-3057
Mounting Bracket

270513057
13F10-08614-AB: RNCC: 2 | RNVC: 1

14 Oct 2010

5340-27-059-7043
Loop Clamp

270597043
901-KL-411: RNCC: 2 | RNVC: 1

2 Oct 2013

5340-27-025-7903
Angle Bracket

270257903
AN743-13: RNCC: 2 | RNVC: 1

12 Apr 2005

5340-27-017-3652
Mending Plate

270173652
1009.1IS.0082-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-015-7302
Butt Hinge

270157302
16001DM0167: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-051-3137
Crank Handle

270513137
55RS065112: RNCC: 2 | RNVC: 1

14 Oct 2010

5340-27-056-7077
Mounting Bracket

270567077
ADOP-SHELTER-180-SLM: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-015-0421
Loop Clamp

270150421
7729686: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-010-2572
Mounting Bracket

270102572
10131YS0802: RNCC: 2 | RNVC: 1

20 Nov 2001

5340-27-015-0368
Loop Clamp

270150368
7351617: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-0401
Loop Clamp

270150401
7520880: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-055-3653
Mounting Bracket

270553653
57RS309464: RNCC: 2 | RNVC: 1

1 Dec 2011

5340-27-051-4110
Mending Plate

270514110
108019: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-043-8671
Mounting Bracket

270438671
12B19-68136-AA: RNCC: 2 | RNVC: 1

18 Dec 2008

5340-27-034-7416
Bridge Clamp

270347416
11000-16695-AA: RNCC: 2 | RNVC: 1

6 Feb 2007

5340-27-049-2102
Mending Plate

270492102
107187: RNCC: 3 | RNVC: 2

13 Apr 2010

5340-27-021-1040
Access Cover

270211040
1010FK-3512603: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-8235
Utility Access Door

270498235
SIGINAK ON KAYAR KAPISI: RNCC: 2 | RNVC: 1

3 Jun 2010

5340-27-028-2289
Angle Bracket

270282289
MS9593-126: RNCC: 2 | RNVC: 1

14 Dec 2005

5340-27-018-6988
Mounting Bracket

270186988
1010FK-2810684: RNCC: 2 | RNVC: 1
C155 0700-020K: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-011-4735
Mounting Bracket

270114735
99999-NIIN-DA0161412: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-057-1606
Bridge Clamp

270571606
KELEPCE 1 1/4": RNCC: 5 | RNVC: 9

27 Jun 2012

5340-27-046-6655
Mounting Bracket

270466655
2ABEP01147: RNCC: 2 | RNVC: 1

25 Sep 2009

5340-27-058-2253
Mounting Bracket

270582253
200944: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-049-4744
Mending Plate

270494744
105362: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-052-3824
Expansion Shield

270523824
8MM: RNCC: 5 | RNVC: 9

17 Jan 2011

5340-27-048-3701
Mending Plate

270483701
58RS600745: RNCC: 2 | RNVC: 1

3 Feb 2010

5340-27-028-1866
Mounting Bracket

270281866
72A34-16714-AA: RNCC: 2 | RNVC: 1

12 Dec 2005

5340-27-058-9738
Butt Hinge

270589738
SHN-14: RNCC: 5 | RNVC: 9

10 May 2013

5340-27-001-8047
Access Door Hinge

270018047
CESSNA-185-PART0711037-4: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-27-041-4095
Utility Access Door

270414095
87X196 CM AL: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-045-7194
Loop Clamp

270457194
1406801099: RNCC: 3 | RNVC: 2

8 Jun 2009

5340-27-017-3666
Mending Plate

270173666
1009.1IS.0100: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-019-9131
Access Cover

270199131
7710837: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-024-5470
Loop Clamp

270245470
05001FK0124: RNCC: 2 | RNVC: 1
P106071: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-017-3620
Mending Plate

270173620
1009.1IS.0040-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-024-5627
Access Cover

270245627
1010FG-2963001: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-005-1751
Loop Clamp

270051751
1010002568: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-028-7783
Mounting Bracket

270287783
884-5800-998: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-022-0769
Mounting Bracket

270220769
1009 1YD 0333: RNCC: 2 | RNVC: 1

6 Feb 2004

5340-27-017-3756
Recess Handle

270173756
1009.1IS.0054-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-025-9349
T Bracket

270259349
R79851517: RNCC: 2 | RNVC: 1

5 May 2005

5340-27-054-9782
Catch Strike

270549782
72C09-57210-AA: RNCC: 2 | RNVC: 1

26 Oct 2011

5340-27-011-8498
Strap End Clip

270118498
A7-182: RNCC: 2 | RNVC: 1

23 Dec 2001

5340-27-038-1015
Mounting Bracket

270381015
044-03-004: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-021-1288
Mending Plate

270211288
1010FK-0000550: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-9592
Access Cover

270059592
3K13704: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-006-9190
Mounting Bracket

270069190
P91AG A62570 AA: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-034-1983
Crank Handle

270341983
100009: RNCC: 2 | RNVC: 1

15 Dec 2006

5340-27-041-4315
Mending Plate

270414315
4818060: RNCC: 2 | RNVC: 1

22 May 2008

5340-27-042-1042
Bow Handle

270421042
54041: RNCC: 2 | RNVC: 1

18 Jul 2008

5340-27-054-6788
Mounting Bracket

270546788
55RS752929: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-006-8279
Flush Catch Claw

270068279
062000102: RNCC: 2 | RNVC: 1

18 May 1999

5340-27-018-9039
Bow Handle

270189039
1206KYY1002: RNCC: 2 | RNVC: 1
9056551: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-051-4088
Mending Plate

270514088
102968: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-044-2893
Mending Plate

270442893
81.41335-0118: RNCC: 2 | RNVC: 1

22 Jan 2009

5340-27-003-8198
Access Cover

270038198
3522-1499-8221: RNCC: 2 | RNVC: 1
3522-1499-8221: RNCC: 3 | RNVC: 1

8 Nov 1994

5340-27-059-6574
Loop Clamp

270596574
901-KL-356: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-021-0535
Mending Plate

270210535
1010FK-0000293: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-0588
Mounting Bracket

270540588
377770457201: RNCC: 2 | RNVC: 1

20 Jul 2011

5340-27-020-7830
Mounting Bracket

270207830
1009.1KI.0131-6*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-4617
Mounting Bracket

270214617
10861520: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-3360
Mending Plate

270213360
1012.1HSCA.02-65: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-5062
Butt Hinge

270515062
50MM,OKKA,SAG: RNCC: 2 | RNVC: 1

3 Nov 2010

5340-27-025-9976
Plain Solid Disk

270259976
R79856335: RNCC: 2 | RNVC: 1

17 May 2005

5340-27-037-0536
Mounting Bracket

270370536
L-304: RNCC: 2 | RNVC: 1

12 Jul 2007

5340-27-054-2963
Bridge Clamp

270542963
98017830: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-028-4350
Bail Handle

270284350
KEDM-307: RNCC: 2 | RNVC: 1

30 Dec 2005

5340-27-021-1925
Mending Plate

270211925
1010FG-0000325: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-9379
Bow Handle

270569379
CH01-01-014: RNCC: 2 | RNVC: 1

31 May 2012

5340-27-053-3686
Utility Access Door

270533686
H341148105: RNCC: 2 | RNVC: 1

25 Apr 2011

5340-27-024-9215
Caster Wheel

270249215
M22TKGR1: RNCC: 2 | RNVC: 1
ESTM22TKGR1: RNCC: 5 | RNVC: 9

17 Dec 2004

5340-27-038-8578
Mounting Bracket

270388578
2ABEP0295: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-036-6801
Mounting Bracket

270366801
83A11-58252-AB: RNCC: 2 | RNVC: 1
83A11-58252-AC: RNCC: 2 | RNVC: 1
83A11-58252-BA: RNCC: 2 | RNVC: 1

19 Jun 2007

5340-27-053-2960
Mounting Bracket

270532960
H341147503: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-053-2942
Mounting Bracket

270532942
H341151602: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-021-3483
Mounting Bracket

270213483
1009.1KI.0319-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-3707
Mounting Bracket

270223707
52461MBT610: RNCC: 2 | RNVC: 1
52461MBT610: RNCC: 5 | RNVC: 9

2 Mar 2004

5340-27-024-3879
Mounting Bracket

270243879
10131YS2060: RNCC: 2 | RNVC: 1

20 Oct 2004

5340-27-047-5686
Bow Handle

270475686
40 LIK KOL: RNCC: 2 | RNVC: 1

9 Dec 2009

5340-27-051-3235
Mounting Bracket

270513235
55RS860498: RNCC: 2 | RNVC: 1

15 Oct 2010

5340-27-056-8355
Bridge Clamp

270568355
2.HIBM-T07/26-49-1-2: RNCC: 2 | RNVC: 1

16 May 2012

5340-27-033-6348
Angle Bracket

270336348
901-AS-351: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-019-5393
Caster Wheel

270195393
07002YT0188: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-013-5339
Catch Strike

270135339
81.66912.0126: RNCC: 2 | RNVC: 1

26 Jun 2002

5340-27-015-0372
Loop Clamp

270150372
7367485: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-047-0719
Mending Plate

270470719
13C00-57530-AA: RNCC: 2 | RNVC: 1

2 Nov 2009

5340-27-053-3130
Mounting Bracket

270533130
H341155101: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-023-4597
Access Cover

270234597
1934060300: RNCC: 2 | RNVC: 1
4.03.04.08: RNCC: 2 | RNVC: 1

2 Jul 2004

5340-27-022-5457
Expansion Shield

270225457
M24AS4: RNCC: 2 | RNVC: 1

24 Mar 2004

5340-27-026-0168
Mortise Lock Set

270260168
16001YK0526: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-001-7367
Loop Clamp

270017367
TM55-1520-210-3204-070-048-001: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-043-5133
Bumper

270435133
RESIM NO:102 EX.KAL.2900-193-000: RNCC: 2 | RNVC: 1

17 Nov 2008

5340-27-028-0534
Mounting Bracket

270280534
6015-2337-3006: RNCC: 2 | RNVC: 1

28 Nov 2005

5340-27-028-7766
Mounting Bracket

270287766
884-5800-981: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-053-9234
Bow Handle

270539234
107910: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-051-4128
Mending Plate

270514128
108039: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-044-1247
Catch Strike

270441247
12E00-55477-AA: RNCC: 2 | RNVC: 1

9 Jan 2009

5340-27-015-0386
Loop Clamp

270150386
7392320: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-019-3688
Expansion Shield

270193688
10121HD0081: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-015-0419
Loop Clamp

270150419
7727298: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-043-2964
Mounting Bracket

270432964
74A05-60217-AA: RNCC: 2 | RNVC: 1

24 Oct 2008

5340-27-035-7953
Sliding Door Track

270357953
51742246: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-025-2795
Mounting Bracket

270252795
2510-ATF-0133: RNCC: 2 | RNVC: 1

16 Feb 2005

5340-27-051-4087
Mending Plate

270514087
102089: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-013-3355
Rod Retainer Clip

270133355
YC15 16828 AA: RNCC: 2 | RNVC: 1

4 Jun 2002

5340-27-022-0796
Loop Clamp

270220796
39031: RNCC: 2 | RNVC: 1

6 Feb 2004

5340-27-042-9935
Mounting Bracket

270429935
40.624.0100: RNCC: 2 | RNVC: 1
40.624.0100: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-058-7501
Mounting Bracket

270587501
55RS752682: RNCC: 2 | RNVC: 1

28 Mar 2013

5340-27-034-9521
Loop Clamp

270349521
Q70: RNCC: 2 | RNVC: 1

19 Feb 2007

5340-27-052-6316
Mounting Bracket

270526316
21 51 400 40R: RNCC: 2 | RNVC: 2

10 Feb 2011

5340-27-032-5778
Section Block Clamp

270325778
40-626-0173: RNCC: 2 | RNVC: 1
40-626-0173: RNCC: 2 | RNVC: 1

11 Aug 2006

5340-27-055-2178
Mounting Bracket

270552178
1692-0053: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-056-7936
Bridge Clamp

270567936
416.011: RNCC: 2 | RNVC: 1
416.011: RNCC: 2 | RNVC: 1

14 May 2012

5340-27-052-1117
Mounting Bracket

270521117
1010FK-0604434: RNCC: 2 | RNVC: 1

20 Dec 2010

5340-27-004-5519
Retaining Strap

270045519
10091YA5023: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-051-2527
Butt Hinge

270512527
16F00-72122-AA: RNCC: 2 | RNVC: 1

12 Oct 2010

5340-27-041-4037
Utility Access Door

270414037
82X215 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-044-5345
Catch Strike

270445345
YC15V441A09AJ: RNCC: 2 | RNVC: 1

13 Feb 2009

5340-27-051-5855
Catch Strike

270515855
3C46E22146AB: RNCC: 2 | RNVC: 1

8 Nov 2010

5340-27-007-1743
Retaining Clip

270071743
E 865811 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-024-5415
Mounting Bracket

270245415
1010FK-0000256: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-046-6800
Access Cover

270466800
Y532-67800-000: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-059-6500
Loop Clamp

270596500
901-KL-339: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-055-3370
Mounting Bracket

270553370
1692-0172: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-048-0368
Mending Plate

270480368
S-011: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-040-6552
Mounting Bracket

270406552
40-770-0234: RNCC: 2 | RNVC: 1

19 Feb 2008

5340-27-040-6010
Angle Bracket

270406010
Y531-63000-200: RNCC: 2 | RNVC: 1

4 Feb 2008

5340-27-051-0376
Utility Access Door

270510376
IYAK-1350X2300: RNCC: 2 | RNVC: 1

27 Sep 2010

5340-27-047-1786
Mending Plate

270471786
13C00-72232-AB: RNCC: 2 | RNVC: 1

10 Nov 2009

5340-27-006-9401
Mounting Bracket

270069401
97AG 5K965 AA: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-035-9608
Mounting Bracket

270359608
127330688: RNCC: 2 | RNVC: 1

12 Apr 2007

5340-27-040-2803
Bow Handle

270402803
8200285665: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-024-4888
Mounting Bracket

270244888
91971-17840: RNCC: 2 | RNVC: 1

4 Nov 2004

5340-27-055-2858
Mounting Bracket

270552858
C6032-CST-0004: RNCC: 3 | RNVC: 2

28 Nov 2011

5340-27-021-9693
Mounting Bracket

270219693
1009 1AD 0009/1: RNCC: 2 | RNVC: 1

16 Jan 2004

5340-27-051-3086
Mending Plate

270513086
16F00-58318-AA: RNCC: 2 | RNVC: 1

14 Oct 2010

5340-27-032-6506
Access Cover

270326506
40-765-8060: RNCC: 2 | RNVC: 1
40-765-8060: RNCC: 2 | RNVC: 1

29 Aug 2006

5340-27-050-5390
Mending Plate

270505390
105565: RNCC: 3 | RNVC: 2

5 Aug 2010

5340-27-038-2424
Utility Access Door

270382424
KBN190: RNCC: 5 | RNVC: 9

21 Sep 2007

5340-27-059-7716
Mending Plate

270597716
6040-4037-3125: RNCC: 2 | RNVC: 1

1 Nov 2013

5340-27-006-7121
Access Cover

270067121
S42023-A806-S3: RNCC: 2 | RNVC: 1

23 Mar 1999

5340-27-058-3699
Mending Plate

270583699
CV71470: RNCC: 2 | RNVC: 1

17 Jan 2013

5340-27-054-3967
Mounting Bracket

270543967
100596: RNCC: 2 | RNVC: 2

6 Sep 2011

5340-27-051-1083
Mending Plate

270511083
103786: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-058-8388
Mounting Bracket

270588388
30293: RNCC: 2 | RNVC: 1

12 Apr 2013

5340-27-016-6442
Mechanical Stop

270166442
300.01.00010: RNCC: 2 | RNVC: 1

20 Feb 2003

5340-27-050-1551
Mending Plate

270501551
103579: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-019-6256
Webbing Strap

270196256
05001HS0043: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-013-2498
Loop Clamp

270132498
KELEPCE-150: RNCC: 2 | RNVC: 1

21 May 2002

5340-27-050-8695
Mounting Bracket

270508695
6H4-43112-04-4D: RNCC: 3 | RNVC: 2
6H4-43112-04-4D: RNCC: 3 | RNVC: 2

6 Sep 2010

5340-27-057-9405
Crank Handle

270579405
1010FMA-1800051: RNCC: 2 | RNVC: 1

20 Nov 2012

5340-27-059-7894
Mounting Bracket

270597894
SGB-DKP-M-4-0008: RNCC: 2 | RNVC: 1

8 Nov 2013

5340-27-059-0892
Angle Bracket

270590892
04264108: RNCC: 2 | RNVC: 1

23 May 2013

5340-27-059-7041
Loop Clamp

270597041
901-KL-409: RNCC: 2 | RNVC: 1

2 Oct 2013

5340-27-041-7437
Mounting Bracket

270417437
PTYM10410A: RNCC: 2 | RNVC: 1
83A19-61968-AA: RNCC: 2 | RNVC: 1

13 Jun 2008

5340-27-059-6850
Loop Clamp

270596850
901-KL-331: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-038-1477
Mending Plate

270381477
31743-11H00: RNCC: 5 | RNVC: 9

17 Sep 2007

5340-27-017-3624
Mending Plate

270173624
1009.1IS.0055-2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-043-2079
Mounting Bracket

270432079
2ABEP00988: RNCC: 2 | RNVC: 1

20 Oct 2008

5340-27-058-2229
Tee Hinge

270582229
200836: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-057-6764
Mending Plate

270576764
E-61410: RNCC: 2 | RNVC: 1

21 Sep 2012

5340-27-009-4883
Catch Strike

270094883
7700838359: RNCC: 2 | RNVC: 1

13 Jul 2001

5340-27-048-4652
Bridge Clamp

270484652
BW301602509A: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-27-023-4827
Butt Hinge

270234827
MENTESE,OKKA,KROM: RNCC: 2 | RNVC: 1

6 Jul 2004

5340-27-052-2964
Mounting Bracket

270522964
303344: RNCC: 2 | RNVC: 1

4 Jan 2011

5340-27-049-2567
Mounting Bracket

270492567
KG31014AA: RNCC: 3 | RNVC: 2

15 Apr 2010

5340-27-029-1156
Bow Handle

270291156
YGA2682-LD: RNCC: 2 | RNVC: 1

2 Mar 2006

5340-27-034-9704
Mounting Bracket

270349704
13C00-08241-AA: RNCC: 2 | RNVC: 1

20 Feb 2007

5340-27-001-7887
Loop Clamp

270017887
TM55-1520-210-2AN735-040: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-017-8121
Angle Bracket

270178121
MM-7220-0020: RNCC: 2 | RNVC: 1

10 Sep 2003

5340-27-049-6553
Mending Plate

270496553
72A12-60315-AA: RNCC: 2 | RNVC: 1

17 May 2010

5340-27-054-3510
Mending Plate

270543510
98018391: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-27-022-8099
Compression Cup

270228099
05001DK0360: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-054-7848
Mending Plate

270547848
203387: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-038-1536
Mounting Bracket

270381536
1010FK-2702061: RNCC: 2 | RNVC: 1

18 Sep 2007

5340-27-045-7500
Utility Access Door

270457500
GDR-0045: RNCC: 2 | RNVC: 2

10 Jun 2009

5340-27-038-6265
Mending Plate

270386265
83A11-36934-AA: RNCC: 2 | RNVC: 1

23 Oct 2007

5340-27-050-5108
Bridge Clamp

270505108
DIN-3015-L-KP-5-G-40-PA: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-012-7024
Loop Clamp

270127024
90464-15157-00: RNCC: 2 | RNVC: 1
6B84093: RNCC: 2 | RNVC: 1

6 Mar 2002

5340-27-033-6284
Mounting Bracket

270336284
40-205-3960: RNCC: 2 | RNVC: 1
40-205-3960: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-005-6350
Angle Bracket

270056350
P92VB-V28136-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-051-4979
Mechanical Stop

270514979
1005-TJ1-09614: RNCC: 2 | RNVC: 1

3 Nov 2010

5340-27-027-2588
Angle Bracket

270272588
15-01-491-001: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-038-6571
Mending Plate

270386571
83A11-55439-AA: RNCC: 2 | RNVC: 1

24 Oct 2007

5340-27-022-1266
Expansion Plug

270221266
10121YT5587: RNCC: 2 | RNVC: 1
7346992: RNCC: 5 | RNVC: 9

12 Feb 2004

5340-27-024-2997
Mounting Bracket

270242997
1010FK-1811505: RNCC: 2 | RNVC: 1

9 Oct 2004

5340-27-053-6580
Mounting Bracket

270536580
H341217901: RNCC: 2 | RNVC: 1

1 Jun 2011

5340-27-058-6255
Mounting Bracket

270586255
VOE12745521: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-27-055-3375
Mounting Bracket

270553375
1692-0024: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-021-1955
Handle Grip

270211955
901-KK-158: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-0115
Access Cover

270510115
63D-45301-02-4D: RNCC: 3 | RNVC: 2
63D-45301-02-4D: RNCC: 3 | RNVC: 2

23 Sep 2010

5340-27-055-3388
Mounting Bracket

270553388
1692-0171: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-050-8484
Access Cover

270508484
6F5-15779-02: RNCC: 3 | RNVC: 2
6F5-15779-02: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-022-0148
Mounting Bracket

270220148
KMS 0021-11: RNCC: 2 | RNVC: 1

23 Jan 2004

5340-27-021-5360
Mending Plate

270215360
1010FG-0000489: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-9083
Mounting Bracket

270499083
061200-001-0: RNCC: 2 | RNVC: 1

10 Jun 2010

5340-27-007-7666
Flush Catch

270077666
10131YM0064: RNCC: 2 | RNVC: 1

11 Feb 2000

5340-27-036-8894
Filler Opening Cap

270368894
CG0190398: RNCC: 2 | RNVC: 1

3 Jul 2007

5340-27-058-3007
Mending Plate

270583007
0421 5648: RNCC: 2 | RNVC: 2

7 Jan 2013

5340-27-049-6555
Mounting Bracket

270496555
72A12-60319-AA: RNCC: 2 | RNVC: 1

17 May 2010

5340-27-021-4877
Track Stop

270214877
1010FK-1911447: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-4088
Mending Plate

270444088
81.26121-0048: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-048-7599
Access Cover

270487599
6436-04: RNCC: 2 | RNVC: 1
6436-04: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-054-7430
Butt Hinge Leaf

270547430
901-VM-20-7: RNCC: 2 | RNVC: 1

12 Oct 2011

5340-27-028-7604
Mounting Bracket

270287604
884-5810-953: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-056-7088
Mounting Bracket

270567088
MM-7412-0007: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-040-2549
Mending Plate

270402549
8200262736: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-021-0330
Mounting Bracket

270210330
1009.1KI.0351-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-032-3418
Bridge Clamp

270323418
40-251-0021: RNCC: 2 | RNVC: 1
40-251-0021: RNCC: 2 | RNVC: 1

23 Jun 2006

5340-27-054-1757
Mending Plate

270541757
98019402: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-021-8179
Expansion Plug

270218179
10121YT5555: RNCC: 2 | RNVC: 1

31 Dec 2003

5340-27-015-7219
Flush Lock

270157219
10091KI0186: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-005-1721
Access Cover

270051721
1010000318: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-058-1077
Mounting Bracket

270581077
98011661: RNCC: 2 | RNVC: 1

10 Dec 2012

5340-27-054-2026
Utility Access Door

270542026
RC3000P: RNCC: 5 | RNVC: 9

8 Aug 2011

5340-27-050-2270
Utility Access Door

270502270
460X270 CM-DEMIR: RNCC: 2 | RNVC: 1

8 Jul 2010

5340-27-057-7171
Mounting Bracket

270577171
73 3579 0369: RNCC: 2 | RNVC: 1

3 Oct 2012

5340-27-025-7671
Mounting Bracket

270257671
2ABMK 01166: RNCC: 2 | RNVC: 1

7 Apr 2005

5340-27-032-2260
Mending Plate

270322260
2B0-8257V-00-00: RNCC: 2 | RNVC: 1

9 Jun 2006

5340-27-032-2193
Mending Plate

270322193
4TX-8431R-00-00: RNCC: 2 | RNVC: 1

8 Jun 2006

5340-27-054-2006
Utility Access Door

270542006
RC325A: RNCC: 5 | RNVC: 9

8 Aug 2011

5340-27-058-0560
Caster Wheel

270580560
KK0392219: RNCC: 5 | RNVC: 9

5 Dec 2012

5340-27-028-7569
Mounting Bracket

270287569
884-5810-921: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-028-1862
Mounting Bracket

270281862
72A34-16716-AA: RNCC: 2 | RNVC: 1

12 Dec 2005

5340-27-029-6686
Loop Holder

270296686
AYAKLI CERCEVE 4,4X3,15 METRE: RNCC: 2 | RNVC: 1

1 May 2006

5340-27-039-3436
Mounting Bracket

270393436
F-2561-2: RNCC: 2 | RNVC: 1

27 Nov 2007

5340-27-024-8197
Mounting Bracket

270248197
1.HIBM-1A-613: RNCC: 2 | RNVC: 1

7 Dec 2004

5340-27-041-4036
Utility Access Door

270414036
81X215 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-006-9404
Mounting Bracket

270069404
91AG 17485 AB: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-013-1111
Loop Clamp

270131111
81.97420.0135: RNCC: 2 | RNVC: 1

26 Apr 2002

5340-27-054-6794
Mounting Bracket

270546794
55RS752940: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-017-3447
Bridge Clamp

270173447
KLIPS: RNCC: 2 | RNVC: 1
00442: RNCC: 2 | RNVC: 1

18 Jun 2003

5340-27-004-5146
Access Cover

270045146
10121YK5187: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-051-6799
Mending Plate

270516799
3EC-60-15270: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-27-009-7640
Flush Catch Claw

270097640
10004033: RNCC: 2 | RNVC: 1
TT-00011: RNCC: 2 | RNVC: 1

18 Jul 2003

5340-27-044-4082
Mending Plate

270444082
81.97488-0543: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-022-1390
Mending Plate

270221390
23212MV9670: RNCC: 2 | RNVC: 1
23212MV9670: RNCC: 5 | RNVC: 9

13 Feb 2004

5340-27-041-5106
Mounting Bracket

270415106
901-MP-165: RNCC: 2 | RNVC: 1

29 May 2008

5340-27-001-7566
Loop Clamp

270017566
TM55-1520-210-6EAB-700D-16: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-050-3845
Mending Plate

270503845
101280: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-050-6678
Mounting Bracket

270506678
308H60: RNCC: 2 | RNVC: 1

16 Aug 2010

5340-27-043-8672
Mounting Bracket

270438672
12B19-68106-AB: RNCC: 2 | RNVC: 1

18 Dec 2008

5340-27-041-4337
Mending Plate

270414337
504046817: RNCC: 2 | RNVC: 1

23 May 2008

5340-27-005-1696
Access Cover

270051696
1010001029: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-036-8223
Hinge Torsion Bar

270368223
40.660.7643: RNCC: 2 | RNVC: 1
40.660.7643: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-035-3886
Expansion Plug

270353886
2485A118: RNCC: 2 | RNVC: 1

13 Mar 2007

5340-27-005-1462
Rod End Clevis

270051462
1010001293: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-038-5792
Mounting Bracket

270385792
387002474401: RNCC: 2 | RNVC: 1

18 Oct 2007

5340-27-021-1491
Catch Strike

270211491
7700639780: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-008-6659
Catch Strike

270086659
4442832: RNCC: 2 | RNVC: 1

11 Dec 2000

5340-27-047-3223
Mounting Bracket

270473223
7702253944: RNCC: 3 | RNVC: 2

23 Nov 2009

5340-27-046-5727
Utility Access Door

270465727
190X300 CM: RNCC: 2 | RNVC: 1

7 Sep 2009

5340-27-021-1718
Angle Bracket

270211718
1010FK-0000165: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-025-4018
Loop Clamp

270254018
MS21919DG6: RNCC: 2 | RNVC: 1

11 Mar 2005

5340-27-036-3983
Loop Clamp

270363983
3807212: RNCC: 2 | RNVC: 1

30 May 2007

5340-27-049-8456
Utility Access Door

270498456
94X208CM, PVC LAMBRI: RNCC: 2 | RNVC: 1

7 Jun 2010

5340-27-004-5120
Access Cover

270045120
10121YK5270: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-024-5417
Mounting Bracket

270245417
109 1YS 0110: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-025-3046
Mounting Bracket

270253046
897198913051: RNCC: 2 | RNVC: 1

22 Feb 2005

5340-27-025-0085
Hand Crank

270250085
05001FK0239: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-021-4090
Mounting Bracket

270214090
1009.1KI.0190-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-7862
Mounting Bracket

270207862
1009.1KI.0303-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-4915
Mounting Bracket

270554915
5423360: RNCC: 2 | RNVC: 2

8 Dec 2011

5340-27-023-7376
Mounting Bracket

270237376
26101T: RNCC: 2 | RNVC: 1

3 Aug 2004

5340-27-032-7545
Mounting Bracket

270327545
13D00-57208-AA: RNCC: 2 | RNVC: 1

14 Sep 2006

5340-27-053-8349
Mending Plate

270538349
C 171 500027: RNCC: 2 | RNVC: 2

28 Jun 2011

5340-27-007-1807
Retaining Clip

270071807
E 662277 S81: RNCC: 2 | RNVC: 1

15 Sep 1999

5340-27-058-9323
Access Cover

270589323
VOE12744327: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-051-4092
Mending Plate

270514092
104778: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-028-6179
Mounting Bracket

270286179
MM-7450-0096-KNM51: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-055-2593
Utility Access Door

270552593
UG 050000 POZ-20: RNCC: 2 | RNVC: 1
UG 050000 POZ-20: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-013-0093
Angle Bracket

270130093
THPB00121-119: RNCC: 2 | RNVC: 1

10 Apr 2002

5340-27-028-1659
Mounting Bracket

270281659
72A10-36238-AB: RNCC: 2 | RNVC: 1

8 Dec 2005

5340-27-008-0471
Snap Hook

270080471
9061914: RNCC: 2 | RNVC: 1

9 Jun 2000

5340-27-047-3357
Bow Handle

270473357
897582304151: RNCC: 2 | RNVC: 1

23 Nov 2009

5340-27-006-9210
Mounting Bracket

270069210
91AG A10A812 AB: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-019-2169
Loop Clamp

270192169
11B58410: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-011-0705
Mechanical Stop

270110705
7116710412: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-006-9394
Mounting Bracket

270069394
95AB A044F36 AC: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-054-3892
Mounting Bracket

270543892
55RS752592: RNCC: 2 | RNVC: 1

5 Sep 2011

5340-27-048-6679
Sliding Door Track

270486679
KAPI RAY SISTEMI,3M: RNCC: 2 | RNVC: 1
AL15: RNCC: 2 | RNVC: 1

18 Feb 2010

5340-27-054-6601
Mending Plate

270546601
98021362: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-27-054-5902
Metal Grille

270545902
3000X2000: RNCC: 5 | RNVC: 9

29 Sep 2011

5340-27-028-8036
Mending Plate

270288036
35005857: RNCC: 2 | RNVC: 1

8 Feb 2006

5340-27-041-4046
Utility Access Door

270414046
88X220 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-017-0413
Angle Bracket

270170413
ASM5C-16: RNCC: 2 | RNVC: 1

8 May 2003

5340-27-014-6084
Bridge Clamp

270146084
5340-TJ-01617: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-006-8743
Access Cover

270068743
10131YL0178: RNCC: 2 | RNVC: 1

2 Jun 1999

5340-27-015-0384
Loop Clamp

270150384
7392318: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-018-6898
Mounting Bracket

270186898
1010FK-2810209: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-059-0603
Expansion Plug

270590603
04263723: RNCC: 2 | RNVC: 1

21 May 2013

5340-27-057-8500
Mending Plate

270578500
CV72355-AT63756: RNCC: 2 | RNVC: 1

7 Nov 2012

5340-27-049-1688
Mounting Bracket

270491688
S01 001 0001 1650 014 F 02.I: RNCC: 2 | RNVC: 1

9 Apr 2010

5340-27-048-3853
Mounting Bracket

270483853
54214167: RNCC: 2 | RNVC: 1

5 Feb 2010

5340-27-058-7248
Mechanical Stop

270587248
M532F654020100: RNCC: 2 | RNVC: 1

21 Mar 2013

5340-27-046-7089
Mounting Bracket

270467089
2ABEP01157: RNCC: 2 | RNVC: 1

2 Oct 2009

5340-27-025-4802
Bow Handle

270254802
A22A5-10412G: RNCC: 2 | RNVC: 1

22 Mar 2005

5340-27-057-9572
Mending Plate

270579572
16919-ZY3-003: RNCC: 2 | RNVC: 1

22 Nov 2012

5340-27-032-2471
Elastic Strap

270322471
7H3-82131-00-00: RNCC: 2 | RNVC: 1

12 Jun 2006

5340-27-032-5808
Rod End Clevis

270325808
40-624-0160: RNCC: 2 | RNVC: 1
40-624-0160: RNCC: 2 | RNVC: 1

11 Aug 2006

5340-27-054-6594
Mounting Bracket

270546594
3M61920: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-038-7234
Butt Hinge

270387234
10091MM0013: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-015-8531
Loop Clamp

270158531
1010004889: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-007-2634
Webbing Strap

270072634
10000168: RNCC: 2 | RNVC: 1

8 Oct 1999

5340-27-058-5659
Bridge Clamp

270585659
5259180: RNCC: 2 | RNVC: 1

21 Feb 2013

5340-27-055-6581
Hand Crank

270556581
KOL,CALISTIRMA: RNCC: 2 | RNVC: 1

22 Dec 2011

5340-27-058-6810
Mounting Bracket

270586810
25010163: RNCC: 2 | RNVC: 1

13 Mar 2013

5340-27-015-0356
Loop Clamp

270150356
7057339: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-0373
Loop Clamp

270150373
7384871: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-005-9941
Access Cover

270059941
924F-6664-AA: RNCC: 3 | RNVC: 2

6 Mar 1998

5340-27-043-2231
Bow Handle

270432231
A2102672110: RNCC: 2 | RNVC: 1

21 Oct 2008

5340-27-053-2924
Mounting Bracket

270532924
H341158601: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-055-6956
Access Cover

270556956
5080919: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-007-9387
Expansion Plug

270079387
3B83862: RNCC: 2 | RNVC: 1

26 Apr 2000

5340-27-058-0416
Caster Wheel

270580416
09013DT0104: RNCC: 5 | RNVC: 9

4 Dec 2012

5340-27-050-0353
Access Cover

270500353
AR534T332000000: RNCC: 2 | RNVC: 1

18 Jun 2010

5340-27-055-9766
Mending Plate

270559766
37936546200: RNCC: 2 | RNVC: 1

19 Jan 2012

5340-27-050-0668
Mending Plate

270500668
83A19-61330-AA: RNCC: 2 | RNVC: 1

21 Jun 2010

5340-27-027-2575
Angle Bracket

270272575
15-01-407-009: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-041-9184
Butt Hinge

270419184
AC-200-12: RNCC: 2 | RNVC: 1

1 Jul 2008

5340-27-055-3398
Mounting Bracket

270553398
1692-0200: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-058-3136
Mending Plate

270583136
0490 3299: RNCC: 2 | RNVC: 1

8 Jan 2013

5340-27-058-9198
Mounting Bracket

270589198
VOE12727897: RNCC: 3 | RNVC: 2

30 Apr 2013

5340-27-045-9304
Loop Clamp

270459304
5175A81: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-058-0632
Mending Plate

270580632
203565: RNCC: 2 | RNVC: 1

5 Dec 2012

5340-27-013-3103
Mending Plate

270133103
88.62910.0027: RNCC: 2 | RNVC: 1

29 May 2002

5340-27-041-4156
Utility Access Door

270414156
148X145 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-045-6258
Catch Strike

270456258
6A7996: RNCC: 5 | RNVC: 9

21 May 2009

5340-27-059-6423
Loop Clamp

270596423
901-KL-325: RNCC: 2 | RNVC: 1

23 Sep 2013

5340-27-017-7265
Mounting Bracket

270177265
MKE 401 172-X: RNCC: 2 | RNVC: 1

22 Aug 2003

5340-27-005-7654
Angle Bracket

270057654
10131YB0552: RNCC: 3 | RNVC: 2

26 Jan 1998

5340-27-025-8729
Mounting Bracket

270258729
1010FG-1802379-731: RNCC: 2 | RNVC: 1

22 Apr 2005

5340-27-018-6641
Mounting Bracket

270186641
1010FK-2702259: RNCC: 2 | RNVC: 1
1010FK-2702259: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-007-4222
Mounting Bracket

270074222
93BG F513K37 AA: RNCC: 2 | RNVC: 1

9 Nov 1999

5340-27-018-6989
Mounting Bracket

270186989
1010FK-2810687: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-051-4894
Mending Plate

270514894
400282-004: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-27-025-4904
Hand Crank

270254904
10131YK2026: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-033-9703
Catch Strike

270339703
13D00-58402-AA: RNCC: 2 | RNVC: 1

30 Nov 2006

5340-27-053-5025
Mounting Bracket

270535025
H342736400: RNCC: 2 | RNVC: 1

12 May 2011

5340-27-001-2855
Door Hook

270012855
MN055-1500-204 1560-UH1-764: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-015-5332
Butt Hinge

270155332
11051DM0023: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-059-2643
Mounting Bracket

270592643
55RS752969: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-056-8716
Mending Plate

270568716
203663: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-059-2636
Mending Plate

270592636
98022248: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-056-3016
Handle Grip

270563016
8000TE-15: RNCC: 5 | RNVC: 9

13 Mar 2012

5340-27-042-9912
Mounting Bracket

270429912
40.624.0148: RNCC: 2 | RNVC: 1
40.624.0148: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-021-1293
Mending Plate

270211293
1010FG-0000454: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-8072
Catch Strike

270288072
MUHUR YERI: RNCC: 2 | RNVC: 1

8 Feb 2006

5340-27-027-7531
Loop Clamp

270277531
5120-8719-1310: RNCC: 2 | RNVC: 1

27 Oct 2005

5340-27-057-8828
Mounting Bracket

270578828
32116-ZY3-000: RNCC: 2 | RNVC: 1

13 Nov 2012

5340-27-044-9713
Flush Catch

270449713
02008-TRS-10-0002-12: RNCC: 3 | RNVC: 2

24 Mar 2009

5340-27-055-2164
Mounting Bracket

270552164
1692-0022: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-059-3049
Access Cover

270593049
98019105-23: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-048-3588
Loop Clamp

270483588
5427963A: RNCC: 2 | RNVC: 1

2 Feb 2010

5340-27-042-3789
Mortise Lock

270423789
GOBEK-YALE: RNCC: 2 | RNVC: 1
GOBEK-YALE: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-021-4337
Mounting Bracket

270214337
1012.1HSCA.03-47: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-043-8929
Utility Access Door

270438929
89X195 CM KAPI, ALUMINYUM: RNCC: 2 | RNVC: 1

22 Dec 2008

5340-27-049-5080
Bridge Clamp

270495080
107259: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-016-4037
Bridge Clamp

270164037
08.04236.0002: RNCC: 2 | RNVC: 1

14 Jan 2003

5340-27-050-3897
Mending Plate

270503897
108960: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-059-4845
Sliding Door Track

270594845
13C03-55390-AA: RNCC: 2 | RNVC: 1

23 Aug 2013

5340-27-010-4993
Mounting Bracket

270104993
98012426: RNCC: 2 | RNVC: 1

27 Nov 2001

5340-27-014-3953
Sliding Door Track

270143953
2T14 V25005 AH: RNCC: 2 | RNVC: 1

10 Oct 2002

5340-27-028-0677
Bow Handle

270280677
9071616: RNCC: 2 | RNVC: 1
71A79-72440-AA: RNCC: 5 | RNVC: 9

29 Nov 2005

5340-27-012-5915
Mounting Bracket

270125915
3011R20700001: RNCC: 2 | RNVC: 1

14 Feb 2002

5340-27-022-0552
Mounting Bracket

270220552
KMS 0026: RNCC: 2 | RNVC: 1

29 Jan 2004

5340-27-054-5975
Mounting Bracket

270545975
55RS752944: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-047-5770
Mending Plate

270475770
13C22-38142-AA: RNCC: 2 | RNVC: 1

9 Dec 2009

5340-27-023-1483
Expansion Plug

270231483
10121YT5644: RNCC: 2 | RNVC: 1
7521893: RNCC: 2 | RNVC: 1

1 Jun 2004

5340-27-020-7569
Mounting Bracket

270207569
1009.1KI.0125-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-1229
Mounting Bracket

270441229
12E00-36227-AA: RNCC: 2 | RNVC: 1

9 Jan 2009

5340-27-043-6285
Mounting Bracket

270436285
497496F: RNCC: 2 | RNVC: 1

27 Nov 2008

5340-27-018-6628
Mounting Bracket

270186628
1010FK-2702284: RNCC: 2 | RNVC: 1
HSN06-031: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-007-4787
Catch Strike

270074787
91AB B62452 AB: RNCC: 2 | RNVC: 1

30 Nov 1999

5340-27-003-9187
Block Clamp

270039187
07001MN0424: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-023-1477
Expansion Plug

270231477
10121YT5648: RNCC: 2 | RNVC: 1
7520976: RNCC: 2 | RNVC: 1

1 Jun 2004

5340-27-048-9623
Mending Plate

270489623
103653: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-019-9355
Mounting Bracket

270199355
NRC5220-L: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-024-9464
Compression Cup

270249464
KP51-K: RNCC: 2 | RNVC: 1
R2 KP51K: RNCC: 5 | RNVC: 9

18 Dec 2004

5340-27-059-3053
Access Cover

270593053
98019105-30: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-049-1275
Angle Bracket

270491275
Y535-75002-348: RNCC: 2 | RNVC: 1

6 Apr 2010

5340-27-023-1242
Mending Plate

270231242
2ABM 1MK 0030: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-022-2062
Hand Crank

270222062
SUYT-5: RNCC: 2 | RNVC: 1

18 Feb 2004

5340-27-013-2202
Catch Strike

270132202
1010003230: RNCC: 2 | RNVC: 1
K-2202: RNCC: 2 | RNVC: 1

15 May 2002

5340-27-022-1458
Expansion Plug

270221458
10121YT5583: RNCC: 2 | RNVC: 1
7748957: RNCC: 5 | RNVC: 9

13 Feb 2004

5340-27-005-1496
Loop Clamp

270051496
1010000824: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-048-1256
Mounting Bracket

270481256
12E02-60616-AA: RNCC: 2 | RNVC: 1

7 Jan 2010

5340-27-036-3980
Loop Clamp

270363980
3586007: RNCC: 2 | RNVC: 1

30 May 2007

5340-27-042-1957
Utility Access Door

270421957
100X100 DEMIR KAPI: RNCC: 2 | RNVC: 1

25 Jul 2008

5340-27-050-3894
Mending Plate

270503894
108743: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-003-9196
Hand Crank

270039196
07001MN0058: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-009-5827
Bridge Clamp

270095827
81.66420.0041: RNCC: 2 | RNVC: 1

30 Jul 2001

5340-27-039-2374
Mending Plate

270392374
83A24-73170-AA: RNCC: 2 | RNVC: 1

20 Nov 2007

5340-27-017-4063
Utility Access Door

270174063
1009.1IS.0067-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-013-2170
Flush Catch Claw

270132170
1010003235: RNCC: 2 | RNVC: 1
K-2166: RNCC: 2 | RNVC: 1

15 May 2002

5340-27-024-1324
Mending Plate

270241324
F-1562: RNCC: 2 | RNVC: 1

21 Sep 2004

5340-27-056-6631
Mounting Bracket

270566631
MM-7412-0239: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-042-3825
Strap Hinge

270423825
MENTESE-12CM: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-025-1832
Mounting Bracket

270251832
6030-1311-9001: RNCC: 2 | RNVC: 1

25 Jan 2005

5340-27-015-0379
Loop Clamp

270150379
7385175: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-045-0021
Mounting Bracket

270450021
805-5820-638: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-27-024-2961
Mounting Bracket

270242961
1010FG-1831197: RNCC: 2 | RNVC: 1

8 Oct 2004

5340-27-021-4330
Mounting Bracket

270214330
1012.1HSCA.03-12: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-012-5535
Mounting Bracket

270125535
10131YS0928: RNCC: 2 | RNVC: 1

11 Feb 2002

5340-27-001-7235
Loop Clamp

270017235
TM55-1520-210-2MS21919WDG-25: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-040-2869
Angle Bracket

270402869
Y535-75003-203: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-059-2580
Mounting Bracket

270592580
CM012018-05: RNCC: 2 | RNVC: 1

1 Jul 2013

5340-27-052-7209
Mending Plate

270527209
107852: RNCC: 2 | RNVC: 2

18 Feb 2011

5340-27-001-7886
Loop Clamp

270017886
CESSNA-185-PART0750161-22: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-007-4298
Mounting Bracket

270074298
93AG A016A04 AA: RNCC: 2 | RNVC: 1

10 Nov 1999

5340-27-013-2201
Expansion Shield

270132201
10131: RNCC: 2 | RNVC: 1
53152963100010: RNCC: 2 | RNVC: 1
DA0012236: RNCC: 2 | RNVC: 1
DUBEL 7MM: RNCC: 5 | RNVC: 9

16 May 2002

5340-27-023-5340
Bail Handle

270235340
3760: RNCC: 2 | RNVC: 1

9 Jul 2004

5340-27-027-1304
Butt Hinge

270271304
10131MM0052: RNCC: 2 | RNVC: 1
10131MM0052: RNCC: 2 | RNVC: 1

7 Sep 2005

5340-27-014-6150
Mounting Bracket

270146150
2901465: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-032-6308
Expansion Plug

270326308
5K98427: RNCC: 2 | RNVC: 1

25 Aug 2006

5340-27-008-9025
Flush Catch Claw

270089025
353MK-3-2: RNCC: 2 | RNVC: 1

14 Feb 2001

5340-27-056-7094
Mounting Bracket

270567094
MM-7412-0179: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-055-7440
Flush Catch

270557440
6030-4040-1029: RNCC: 2 | RNVC: 2

2 Jan 2012

5340-27-048-9648
Mending Plate

270489648
103684: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-027-1322
Mounting Bracket

270271322
2ABM1AMB0008: RNCC: 2 | RNVC: 1

7 Sep 2005

5340-27-040-4652
Mounting Bracket

270404652
2862338-1: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-055-8002
Utility Access Door

270558002
ESOK 1408: RNCC: 2 | RNVC: 2

5 Jan 2012

5340-27-057-5735
Mounting Bracket

270575735
M539F352100200: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-021-4084
Mounting Bracket

270214084
1009.1KI.0121-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-8197
Loop Holder

270558197
38003100: RNCC: 2 | RNVC: 2
38003100: RNCC: 5 | RNVC: 9

6 Jan 2012

5340-27-007-4112
Mounting Bracket

270074112
95AG A016A86 AB: RNCC: 2 | RNVC: 1

4 Nov 1999

5340-27-005-3428
Door Closer

270053428
CX100A-W-OT-SIG: RNCC: 3 | RNVC: 2

17 Sep 1997

5340-27-050-3886
Mending Plate

270503886
108479: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-020-6917
Mounting Bracket

270206917
2920AYAK9880001: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-7835
Mending Plate

270207835
1009.1KI.0182-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-0552
Sliding Door Track

270440552
0148: RNCC: 1 | RNVC: 2

2 Jan 2009

5340-27-021-3092
Mending Plate

270213092
1012.1HSCA.02-28: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-9272
Flush Catch

270539272
109454: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-053-9291
Mending Plate

270539291
98017466: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-032-7783
Mounting Bracket

270327783
12E00-36390-AA: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-035-8082
Catch Strike

270358082
46747420: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-047-1789
Bow Handle

270471789
13C00-72300-AB: RNCC: 2 | RNVC: 1

10 Nov 2009

5340-27-011-4850
Access Cover

270114850
4566230981: RNCC: 2 | RNVC: 1
HD20087: RNCC: 2 | RNVC: 1
HD20087: RNCC: 2 | RNVC: 1
HD20087: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-059-0079
Mounting Bracket

270590079
VOE11037525: RNCC: 3 | RNVC: 2
VOE11037525: RNCC: 3 | RNVC: 2

14 May 2013

5340-27-050-8502
Access Cover

270508502
6H4-42711-07-4D: RNCC: 3 | RNVC: 2
6H4-42711-07-4D: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-056-8722
Mending Plate

270568722
98001093-3: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-048-5647
Mending Plate

270485647
HD273110Y: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-27-023-1941
Mounting Bracket

270231941
1010FK-1801138-1: RNCC: 2 | RNVC: 1

4 Jun 2004

5340-27-042-0838
Bow Handle

270420838
40503: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-034-7847
Mending Plate

270347847
13209135: RNCC: 2 | RNVC: 1

8 Feb 2007

5340-27-007-3906
Mounting Bracket

270073906
95WT 7W262 AB: RNCC: 2 | RNVC: 1

31 Oct 1999

5340-27-033-9174
Mounting Bracket

270339174
0000GK0136221: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-017-4532
Angle Bracket

270174532
10131YS0939: RNCC: 2 | RNVC: 1

26 Jun 2003

5340-27-040-4511
Mounting Bracket

270404511
8762368: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-043-2459
Mortise Lock

270432459
BAREL,90MM: RNCC: 2 | RNVC: 1
90MM-BAREL: RNCC: 2 | RNVC: 1

22 Oct 2008

5340-27-028-8267
Mounting Bracket

270288267
M52T3011R450205: RNCC: 2 | RNVC: 1

9 Feb 2006

5340-27-054-6039
Mounting Bracket

270546039
55RS752946: RNCC: 3 | RNVC: 2

30 Sep 2011

5340-27-028-6176
Mounting Bracket

270286176
14395: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-023-0048
Mounting Bracket

270230048
1009 1MK 0002: RNCC: 2 | RNVC: 1

11 May 2004

5340-27-006-9196
Mounting Bracket

270069196
89FB B604K58 AC: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-034-9102
Mending Plate

270349102
691526: RNCC: 2 | RNVC: 1

15 Feb 2007

5340-27-008-1685
Handle Grip

270081685
27715: RNCC: 2 | RNVC: 1

28 Jul 2000

5340-27-015-0422
Loop Clamp

270150422
7735224: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-045-7698
Mending Plate

270457698
10029243: RNCC: 2 | RNVC: 1

11 Jun 2009

5340-27-042-9793
Rod End Clevis

270429793
40.623.0107: RNCC: 2 | RNVC: 1
40.623.0107: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-056-3089
Loop Clamp

270563089
901-KL-262: RNCC: 2 | RNVC: 1

14 Mar 2012

Load More Results