What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 16 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 16 of 53

5340-27-040-5392
Mounting Bracket

270405392
12270205: RNCC: 2 | RNVC: 1

29 Jan 2008

5340-27-005-6090
Angle Bracket

270056090
92VB-B11248-CA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-019-2611
Handle Grip

270192611
10131YK0113: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-024-0500
Access Cover

270240500
98012959: RNCC: 2 | RNVC: 1

10 Sep 2004

5340-27-056-7085
Mounting Bracket

270567085
ADOP-SHELTER-180-IM: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-019-9461
Angle Bracket

270199461
338554-LD: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-4515
Mounting Bracket

270404515
10863641: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-054-7630
Access Cover

270547630
100449: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-054-7171
Mending Plate

270547171
98022465: RNCC: 2 | RNVC: 2

10 Oct 2011

5340-27-009-9379
Angle Bracket

270099379
98012566: RNCC: 2 | RNVC: 1

15 Oct 2001

5340-27-054-7177
Mending Plate

270547177
98022781: RNCC: 2 | RNVC: 2

10 Oct 2011

5340-27-024-0502
Access Cover

270240502
98012959-6: RNCC: 2 | RNVC: 1

10 Sep 2004

5340-27-040-4510
Mounting Bracket

270404510
11610612: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-017-2003
Support Hook

270172003
150 MM: RNCC: 2 | RNVC: 1

27 May 2003

5340-27-057-5728
Mounting Bracket

270575728
M539F297400200: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-026-9283
Flush Catch

270269283
53RS801107: RNCC: 2 | RNVC: 1
DZB3544: RNCC: 2 | RNVC: 1

10 Aug 2005

5340-27-044-2024
Expansion Plug

270442024
4279: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-015-7294
Butt Hinge

270157294
16001DM0070: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-041-2750
Mending Plate

270412750
7253445: RNCC: 2 | RNVC: 1

12 May 2008

5340-27-051-6550
Butt Hinge

270516550
337D66: RNCC: 5 | RNVC: 9

11 Nov 2010

5340-27-015-0408
Loop Clamp

270150408
7704623: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-054-1684
Mending Plate

270541684
98020626: RNCC: 3 | RNVC: 2

3 Aug 2011

5340-27-036-9448
Mending Plate

270369448
C01AH84: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-036-5553
Mounting Bracket

270365553
2C466269AA: RNCC: 2 | RNVC: 1

13 Jun 2007

5340-27-058-5622
Flush Catch

270585622
98023660: RNCC: 2 | RNVC: 1

21 Feb 2013

5340-27-032-8573
Catch Strike

270328573
86VBV 4336 AA: RNCC: 2 | RNVC: 1

25 Sep 2006

5340-27-051-4115
Mending Plate

270514115
108023: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-049-5010
Mending Plate

270495010
108069: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-007-8339
Latch Bar

270078339
9071871: RNCC: 2 | RNVC: 1

3 Mar 2000

5340-27-023-0503
Mounting Bracket

270230503
2ABM 1MK 0007: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-048-7953
Mounting Bracket

270487953
9034-97: RNCC: 2 | RNVC: 1
9034-97: RNCC: 5 | RNVC: 9

2 Mar 2010

5340-27-048-7651
Mending Plate

270487651
9034-69: RNCC: 2 | RNVC: 1
9034-69: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-021-3072
Mending Plate

270213072
1012.1HSCA.02-64: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-1219
Mounting Bracket

270441219
12E00-57174-AA: RNCC: 2 | RNVC: 1

9 Jan 2009

5340-27-024-3080
Mounting Bracket

270243080
1010FG-1831196: RNCC: 2 | RNVC: 1

9 Oct 2004

5340-27-050-1553
Mending Plate

270501553
103581: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-034-2226
Mounting Bracket

270342226
30X40: RNCC: 2 | RNVC: 1

18 Dec 2006

5340-27-059-0522
Loop Clamp

270590522
VOE12735538: RNCC: 3 | RNVC: 2
VOE12735538: RNCC: 3 | RNVC: 2

21 May 2013

5340-27-018-6864
Loop Clamp

270186864
1010FK-2710825: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-017-3696
Pad Eye

270173696
1009.1IS.0056-1D: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-015-8495
Loop Clamp

270158495
1010004871: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-054-0150
Mending Plate

270540150
103336: RNCC: 3 | RNVC: 2

15 Jul 2011

5340-27-021-7008
Mounting Bracket

270217008
1009 1YM 0070: RNCC: 2 | RNVC: 1

24 Dec 2003

5340-27-048-5781
Mending Plate

270485781
HD341109SY: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-038-9828
Access Cover

270389828
901-TS-314G: RNCC: 2 | RNVC: 1

7 Nov 2007

5340-27-005-1503
Loop Clamp

270051503
1010001374: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-003-8196
Access Cover

270038196
6003-0516-4001: RNCC: 2 | RNVC: 1
6003-0516-4001: RNCC: 3 | RNVC: 1

8 Nov 1994

5340-27-041-4028
Utility Access Door

270414028
75X215 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-045-7198
Loop Clamp

270457198
8A4801005: RNCC: 3 | RNVC: 2

8 Jun 2009

5340-27-028-8043
Mending Plate

270288043
35004266: RNCC: 2 | RNVC: 1

8 Feb 2006

5340-27-059-6851
Loop Clamp

270596851
901-KL-332: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-060-0586
Mounting Bracket

270600586
MM-7490-0305: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-058-2152
Bow Handle

270582152
24813-ZW5-U01: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-013-4543
Mending Plate

270134543
81.42401.5254: RNCC: 2 | RNVC: 1

19 Jun 2002

5340-27-059-0816
Access Cover

270590816
VOE20490808: RNCC: 3 | RNVC: 2
VOE20490808: RNCC: 3 | RNVC: 2

22 May 2013

5340-27-006-9504
Mounting Bracket

270069504
95AT A24197 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-006-8410
Access Cover

270068410
10131YK0189: RNCC: 2 | RNVC: 1

24 May 1999

5340-27-015-0446
Loop Clamp

270150446
8675246: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-036-5151
Mounting Bracket

270365151
GCT2A275AA: RNCC: 2 | RNVC: 1

12 Jun 2007

5340-27-050-0688
Mending Plate

270500688
103556: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-055-2771
Butt Hinge Leaf

270552771
PVC KANAT KARSILIGI: RNCC: 5 | RNVC: 9

28 Nov 2011

5340-27-015-8682
Mortise Lock

270158682
99999-NIIN-DA0052447: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-050-3880
Mending Plate

270503880
107080: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-037-4593
Mending Plate

270374593
46846239: RNCC: 2 | RNVC: 1

31 Jul 2007

5340-27-001-2711
Mounting Plate

270012711
102460006: RNCC: 3 | RNVC: 2

21 Jan 1994

5340-27-018-7478
Butt Hinge

270187478
09013DM0109: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-042-5707
Mending Plate

270425707
54558614: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-054-4262
Mending Plate

270544262
98019894: RNCC: 3 | RNVC: 2

9 Sep 2011

5340-27-056-5463
Access Cover

270565463
3835026: RNCC: 2 | RNVC: 2

9 Apr 2012

5340-27-054-1452
Mounting Bracket

270541452
83A19-36159-AA: RNCC: 2 | RNVC: 1

1 Aug 2011

5340-27-038-1036
Mounting Bracket

270381036
017-50-207: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-028-8475
Catch Strike

270288475
MB867059: RNCC: 2 | RNVC: 1

13 Feb 2006

5340-27-049-1057
Mounting Bracket

270491057
302832: RNCC: 2 | RNVC: 1

2 Apr 2010

5340-27-021-5474
Bridge Clamp

270215474
10131YK1325: RNCC: 2 | RNVC: 1

16 Dec 2003

5340-27-053-5103
Mounting Bracket

270535103
H233110100: RNCC: 2 | RNVC: 1

12 May 2011

5340-27-008-6064
Retaining Strap

270086064
98000689: RNCC: 2 | RNVC: 1

27 Nov 2000

5340-27-052-7507
Mending Plate

270527507
99 2A 100 19R: RNCC: 2 | RNVC: 2

21 Feb 2011

5340-27-013-0981
Mending Plate

270130981
81.97487.5021: RNCC: 2 | RNVC: 1

25 Apr 2002

5340-27-054-6163
Mounting Bracket

270546163
1010FMA-0000494-1: RNCC: 2 | RNVC: 1

3 Oct 2011

5340-27-048-2564
Angle Bracket

270482564
901-KP-215-2: RNCC: 2 | RNVC: 1

21 Jan 2010

5340-27-059-2720
Loop Clamp

270592720
55RS752616: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-026-2860
Mounting Bracket

270262860
387003426201: RNCC: 2 | RNVC: 1

27 Jun 2005

5340-27-025-8757
Mounting Bracket

270258757
1010FG-1803290: RNCC: 2 | RNVC: 1

22 Apr 2005

5340-27-034-6115
Mounting Bracket

270346115
533A10: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-020-7839
Mounting Bracket

270207839
1009.1KI.0121-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-045-3373
Lock-Release Lever

270453373
1.HIBM-1D-602: RNCC: 2 | RNVC: 1

29 Apr 2009

5340-27-010-5552
Truss Fairlead

270105552
SBG-03/13: RNCC: 2 | RNVC: 1

3 Dec 2001

5340-27-001-8056
Loop Clamp

270018056
E-AB-205-T53-4 MS21919WDG-8: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-051-1811
Detent Plunger

270511811
101837: RNCC: 3 | RNVC: 2

8 Oct 2010

5340-27-035-8614
Mounting Bracket

270358614
874349: RNCC: 2 | RNVC: 1

4 Apr 2007

5340-27-007-1831
Access Cover

270071831
E 852098 S: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-022-9275
Access Cover

270229275
3.05.06.06: RNCC: 2 | RNVC: 1

5 May 2004

5340-27-024-0021
Mounting Bracket

270240021
1924220108: RNCC: 2 | RNVC: 1
4.06.18.08: RNCC: 2 | RNVC: 1

4 Sep 2004

5340-27-024-3366
Mounting Bracket

270243366
L-111: RNCC: 2 | RNVC: 1
L-111: RNCC: 2 | RNVC: 1

13 Oct 2004

5340-27-053-8356
Caster Wheel

270538356
LC.BM.7.10.01.10-9: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-27-055-9419
Mounting Bracket

270559419
1010FG-0312907: RNCC: 2 | RNVC: 1

16 Jan 2012

5340-27-020-7531
Mounting Bracket

270207531
1009.1KI.0264-1*2-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-0536
Mounting Bracket

270500536
83A11-59321-AA: RNCC: 2 | RNVC: 1

21 Jun 2010

5340-27-024-4494
Mounting Bracket

270244494
45931-22000: RNCC: 2 | RNVC: 1

28 Oct 2004

5340-27-053-0608
Angle Bracket

270530608
96-950002-72: RNCC: 2 | RNVC: 1

23 Mar 2011

5340-27-041-5071
Bail Handle

270415071
F-2561-21: RNCC: 2 | RNVC: 1

29 May 2008

5340-27-051-5524
Mortise Lock

270515524
108460: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-27-024-0532
Butt Hinge

270240532
98013243: RNCC: 2 | RNVC: 1

10 Sep 2004

5340-27-022-0499
Mounting Bracket

270220499
1913076: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-016-6345
Mending Plate

270166345
98013225: RNCC: 2 | RNVC: 1

20 Feb 2003

5340-27-021-4078
Mounting Bracket

270214078
1009.1KI.0189-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3693
Pad Eye

270173693
1009.1IS.0044-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-050-8686
Mounting Bracket

270508686
63D-43311-10-4D: RNCC: 3 | RNVC: 2
63D-43311-10-4D: RNCC: 3 | RNVC: 2

6 Sep 2010

5340-27-050-8698
Mounting Bracket

270508698
63D-42510-00-4D: RNCC: 3 | RNVC: 2
63D-42510-00-4D: RNCC: 3 | RNVC: 2

6 Sep 2010

5340-27-025-2799
Mounting Bracket

270252799
2510-ATF-0130: RNCC: 2 | RNVC: 1

16 Feb 2005

5340-27-053-8274
Sliding Door Track

270538274
C173-1H0002: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-27-059-3051
Access Cover

270593051
98019105-25: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-017-7102
Mounting Bracket

270177102
H-39-0464-50: RNCC: 2 | RNVC: 1

21 Aug 2003

5340-27-019-0450
Catch Strike

270190450
06001-02R167: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-9684
Corner Brace

270219684
1009 1AD 0010/1-2: RNCC: 2 | RNVC: 1

16 Jan 2004

5340-27-005-7655
Angle Bracket

270057655
10131YB0549: RNCC: 3 | RNVC: 2

26 Jan 1998

5340-27-021-4104
Mounting Bracket

270214104
1009.1KI.0273-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-1069
Mending Plate

270511069
101835: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-034-2248
Crank Handle

270342248
200024: RNCC: 2 | RNVC: 1

18 Dec 2006

5340-27-015-0713
Rod End Clevis

270150713
7335793697: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-004-6068
Access Cover

270046068
10131YK1024: RNCC: 3 | RNVC: 2

15 May 1996

5340-27-059-8633
Handle Ferrule

270598633
1.HIBM-1I-2953: RNCC: 2 | RNVC: 1

22 Nov 2013

5340-27-053-8345
Mounting Bracket

270538345
C162-700010: RNCC: 2 | RNVC: 2

28 Jun 2011

5340-27-021-2151
Mounting Bracket

270212151
1012.1HSCA.03-05: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-5305
Mechanical Stop

270215305
15001-MP-2027: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3634
Mending Plate

270173634
1009.1IS.0068-A/12: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-013-9814
Mounting Bracket

270139814
3522-1540-4600: RNCC: 2 | RNVC: 1
3522-1540-4600: RNCC: 2 | RNVC: 1

21 Aug 2002

5340-27-021-1927
Mending Plate

270211927
1010FG-0000326: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-3390
Mounting Bracket

270553390
1692-0178: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-058-2180
Expansion Plug

270582180
91651-ZY3-003: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-027-9116
Mending Plate

270279116
1010FG-0608093: RNCC: 2 | RNVC: 1
1010FG-0608093: RNCC: 5 | RNVC: 9

17 Nov 2005

5340-27-050-0714
Mending Plate

270500714
105982: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-007-2220
Access Cover

270072220
SAMET: RNCC: 2 | RNVC: 1

4 Oct 1999

5340-27-026-7020
Mortise Lock Set

270267020
CIN KILIDI: RNCC: 2 | RNVC: 1
18: RNCC: 2 | RNVC: 1
CEKMECE KILIDI: RNCC: 2 | RNVC: 1
10111YK1503: RNCC: 5 | RNVC: 9

21 Jul 2005

5340-27-042-8359
Mending Plate

270428359
72A54-36290-AA: RNCC: 2 | RNVC: 1

15 Sep 2008

5340-27-013-2450
Loop Clamp

270132450
KEL.D-20MM: RNCC: 2 | RNVC: 1
KELEPCE 3/4": RNCC: 2 | RNVC: 1
53407777700018: RNCC: 2 | RNVC: 1
KELEPCE 3/4": RNCC: 2 | RNVC: 1

20 May 2002

5340-27-021-3272
Flush Catch

270213272
9IML-0128: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-047-5739
Mounting Bracket

270475739
16F00-71516-AA: RNCC: 2 | RNVC: 1

9 Dec 2009

5340-27-034-6192
Mounting Bracket

270346192
1010005795: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-059-0039
Mending Plate

270590039
40.6010.200016 120X160: RNCC: 5 | RNVC: 9

14 May 2013

5340-27-018-6446
Mounting Bracket

270186446
1010FG-0607073: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-6756
Mending Plate

270586756
ADOP-SHELTER-250-KT: RNCC: 2 | RNVC: 1

12 Mar 2013

5340-27-048-0372
Mounting Bracket

270480372
S-013: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-046-6776
Access Cover

270466776
Y255-71000-200: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-060-0567
Mounting Bracket

270600567
MM-7490-0349: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-020-9495
Mending Plate

270209495
1010FG-0000718: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-7536
Mounting Bracket

270287536
884-5810-935: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-001-7567
Loop Clamp

270017567
TM55-1520-210-3EAB-700D21: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-015-7291
Butt Hinge

270157291
16001DM0043: RNCC: 2 | RNVC: 1
GERMAN,SAG,100MM: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-013-3897
Catch Strike

270133897
YC15 V441A09 AH: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-037-0351
Mounting Bracket

270370351
C17G96: RNCC: 2 | RNVC: 1

11 Jul 2007

5340-27-017-3814
Access Cover

270173814
1009.1IS.0062-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-059-2718
Loop Clamp

270592718
55RS252141: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-049-4924
Mending Plate

270494924
107462: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-056-8642
Mending Plate

270568642
98000557-4: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-020-7565
Mending Plate

270207565
1009.1KI.0229-11/3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-008-3274
Access Cover

270083274
83/9 - 2: RNCC: 2 | RNVC: 1

18 Sep 2000

5340-27-059-6521
Loop Clamp

270596521
901-KL-351: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-020-9492
Mending Plate

270209492
1010FG-0000244: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-015-8684
Butt Hinge

270158684
99999-NIIN-DA0052455: RNCC: 2 | RNVC: 1
80 MM: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-042-1767
Mounting Bracket

270421767
2.HIBM-4L-592/5-16: RNCC: 2 | RNVC: 1

24 Jul 2008

5340-27-017-3809
Access Cover

270173809
1009.1IS.0058-9: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-3488
Mounting Bracket

270213488
1009.1KI.0330-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-1643
Mounting Bracket

270491643
S01 001 0001 1650 014 F 02.A: RNCC: 2 | RNVC: 1

8 Apr 2010

5340-27-050-0205
Utility Access Door

270500205
94X28X212CM, KASALI: RNCC: 2 | RNVC: 1

18 Jun 2010

5340-27-020-9385
Mounting Bracket

270209385
1009.1KI.0016: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-7854
Blank Panel

270587854
VOE12745804: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-27-011-8561
Loop Clamp

270118561
1.HIBM-1H-602: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-024-5029
Angle Bracket

270245029
70250-13162-105: RNCC: 2 | RNVC: 1

5 Nov 2004

5340-27-053-8293
Latch Bar

270538293
C171-210040: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-27-028-9364
Mending Plate

270289364
10003960-A: RNCC: 2 | RNVC: 1

16 Feb 2006

5340-27-040-5749
Tee Hinge

270405749
8200081364: RNCC: 2 | RNVC: 1

31 Jan 2008

5340-27-023-1835
Access Cover

270231835
98012579-6: RNCC: 2 | RNVC: 1

3 Jun 2004

5340-27-056-8685
Mending Plate

270568685
202607: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-045-6539
Hand Crank

270456539
ANT-AV219UP: RNCC: 2 | RNVC: 1

27 May 2009

5340-27-011-0547
Access Cover

270110547
7115310216: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-028-6140
Mounting Bracket

270286140
MM-7450-0096-KNM16: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-015-0263
Loop Clamp

270150263
1010FK-2701386: RNCC: 2 | RNVC: 1
EFE-0263: RNCC: 5 | RNVC: 9

10 Dec 2002

5340-27-044-2125
Mounting Bracket

270442125
12E00-70320-AA: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-008-2477
Angle Bracket

270082477
98000574-2: RNCC: 2 | RNVC: 1

28 Aug 2000

5340-27-054-4260
Mending Plate

270544260
12381871-1: RNCC: 3 | RNVC: 2

9 Sep 2011

5340-27-060-0557
Mounting Bracket

270600557
MN-7490-0051: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-037-6304
Mounting Bracket

270376304
83A00-59764-AA: RNCC: 2 | RNVC: 1

13 Aug 2007

5340-27-058-2160
Mending Plate

270582160
24826-ZW5-U01: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-021-2125
Mounting Bracket

270212125
1012.1HSCA.01-01: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-035-9314
Plug Button

270359314
735293927: RNCC: 2 | RNVC: 1

10 Apr 2007

5340-27-029-8465
Mending Plate

270298465
5340012629076: RNCC: 2 | RNVC: 1

30 May 2006

5340-27-034-6107
Mounting Bracket

270346107
535A45: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-008-3019
Loop Clamp

270083019
8171: RNCC: 2 | RNVC: 1

13 Sep 2000

5340-27-034-3902
Bow Handle

270343902
13C00-67206-AA: RNCC: 2 | RNVC: 1

27 Dec 2006

5340-27-029-7217
Access Cover

270297217
T530-G3201-000: RNCC: 2 | RNVC: 1

5 May 2006

5340-27-018-3532
Mending Plate

270183532
10121YP5538-1: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-020-7824
Mounting Bracket

270207824
1009.1KI.0335-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-3507
Loop Holder

270443507
LASTIK FITIL: RNCC: 2 | RNVC: 1

29 Jan 2009

5340-27-020-9491
Mending Plate

270209491
1010FG-0000757: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-5045
Hose Clamp

270285045
8200157361: RNCC: 2 | RNVC: 1

5 Jan 2006

5340-27-051-4107
Mending Plate

270514107
107994: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-056-4985
Mending Plate

270564985
10064493: RNCC: 2 | RNVC: 2

4 Apr 2012

5340-27-053-7652
Mounting Bracket

270537652
901-MS-15-19: RNCC: 2 | RNVC: 1

16 Jun 2011

5340-27-039-2781
Loop Holder

270392781
3587742: RNCC: 2 | RNVC: 1

22 Nov 2007

5340-27-021-0189
Strap Hinge Leaf

270210189
1009.1KI.0190-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-9916
Filler Opening Cap

270589916
CH62828: RNCC: 3 | RNVC: 2
CH62828: RNCC: 3 | RNVC: 2

13 May 2013

5340-27-040-4645
Mounting Bracket

270404645
2862393-1: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-020-3203
Lock Key

270203203
3.03.07.04: RNCC: 2 | RNVC: 1

2 Dec 2003

5340-27-042-5806
Access Cover

270425806
54555115: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-058-0127
Loop Clamp

270580127
95 MM2: RNCC: 2 | RNVC: 1
95 MM2: RNCC: 5 | RNVC: 9

29 Nov 2012

5340-27-021-7690
Thumb Latch

270217690
27740: RNCC: 2 | RNVC: 1

29 Dec 2003

5340-27-008-9358
Mounting Bracket

270089358
98005358-1: RNCC: 2 | RNVC: 1

23 Feb 2001

5340-27-005-7335
Clamping Catch

270057335
13UT1-940-000-07: RNCC: 3 | RNVC: 2

20 Jan 1998

5340-27-058-7224
Bridge Clamp

270587224
13N00-03764-AA: RNCC: 2 | RNVC: 1

21 Mar 2013

5340-27-052-3922
Bow Handle

270523922
71C01-67028-AA: RNCC: 2 | RNVC: 1

17 Jan 2011

5340-27-053-6465
Mechanical Stop

270536465
AB-9120-0010: RNCC: 2 | RNVC: 2

31 May 2011

5340-27-008-8947
Support Hook

270088947
98001461-2: RNCC: 2 | RNVC: 1

12 Feb 2001

5340-27-029-8389
Bow Handle

270298389
735291044: RNCC: 2 | RNVC: 1

29 May 2006

5340-27-020-7889
Mounting Bracket

270207889
1009.1KI.0338-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-052-2009
Mending Plate

270522009
8.216.000.361.0: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-27-024-0920
Mounting Bracket

270240920
1924220100: RNCC: 2 | RNVC: 1
4.06.18.00: RNCC: 2 | RNVC: 1

21 Sep 2004

5340-27-055-2822
Sliding Door Track

270552822
H346054502: RNCC: 2 | RNVC: 1

28 Nov 2011

5340-27-049-1681
Mounting Bracket

270491681
MP002711: RNCC: 2 | RNVC: 1

8 Apr 2010

5340-27-049-1388
Angle Bracket

270491388
1C442320BB: RNCC: 3 | RNVC: 2

6 Apr 2010

5340-27-021-5115
Handle Grip

270215115
TR-0002: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-026-1787
Mending Plate

270261787
2010.6330.061: RNCC: 2 | RNVC: 1

14 Jun 2005

5340-27-021-4116
Mounting Bracket

270214116
1009.1KI.0002-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-4741
Mending Plate

270494741
104564: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-025-2902
Mounting Bracket

270252902
1010FG-0000159-1: RNCC: 2 | RNVC: 1

18 Feb 2005

5340-27-008-1202
Mounting Bracket

270081202
98001457-1: RNCC: 2 | RNVC: 1

18 Jul 2000

5340-27-049-2086
Angle Bracket

270492086
107457: RNCC: 3 | RNVC: 2

13 Apr 2010

5340-27-020-7560
Mounting Bracket

270207560
1009.1KI.0283-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-1699
Retaining Clip

270071699
E 860395 S100: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-007-1739
Retaining Clip

270071739
E865480 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-017-3625
Mending Plate

270173625
1009.1IS.0058-16: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-020-6916
Mounting Bracket

270206916
34623-906-171: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-040-2856
Angle Bracket

270402856
Y532-60102-204: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-058-3799
Access Cover

270583799
37766-03200: RNCC: 5 | RNVC: 9

18 Jan 2013

5340-27-021-1987
Mounting Bracket

270211987
10484008: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-024-5493
Mounting Bracket

270245493
116-219: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-054-6688
Mounting Bracket

270546688
55RS752753: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-016-5071
Mending Plate

270165071
81.97485.0210: RNCC: 2 | RNVC: 1

30 Jan 2003

5340-27-050-0694
Mending Plate

270500694
104227: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-008-6473
Mounting Bracket

270086473
98005230: RNCC: 2 | RNVC: 1

8 Dec 2000

5340-27-040-4647
Mounting Bracket

270404647
12329144: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-037-4534
Loop Clamp

270374534
984474: RNCC: 2 | RNVC: 1

31 Jul 2007

5340-27-048-2672
Flush Lock

270482672
269.07: RNCC: 2 | RNVC: 1

22 Jan 2010

5340-27-051-4097
Mending Plate

270514097
105800: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-058-5615
Mending Plate

270585615
98023285: RNCC: 2 | RNVC: 1

21 Feb 2013

5340-27-049-2122
Mending Plate

270492122
108310: RNCC: 3 | RNVC: 2

13 Apr 2010

5340-27-041-3343
Mounting Bracket

270413343
GU1S30031A-CGLT: RNCC: 2 | RNVC: 1

14 May 2008

5340-27-040-3323
Mounting Bracket

270403323
12257190: RNCC: 2 | RNVC: 1

18 Jan 2008

5340-27-044-2081
Mending Plate

270442081
12E00-76279-AA: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-021-4117
Mounting Bracket

270214117
1009.1KI.0016-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-023-3734
Blank Panel

270233734
TAC: RNCC: 2 | RNVC: 1

24 Jun 2004

5340-27-032-2867
Tee Hinge

270322867
5340ATF0161: RNCC: 2 | RNVC: 1

14 Jun 2006

5340-27-033-6563
Access Cover

270336563
40-205-5045: RNCC: 2 | RNVC: 1
40-205-5045: RNCC: 2 | RNVC: 1

9 Nov 2006

5340-27-015-0431
Loop Clamp

270150431
7968573: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-053-9844
Mounting Bracket

270539844
72C07-61412-AA: RNCC: 2 | RNVC: 1

13 Jul 2011

5340-27-032-6502
Access Cover

270326502
40-765-2153: RNCC: 2 | RNVC: 1
40-765-2153: RNCC: 2 | RNVC: 1

29 Aug 2006

5340-27-055-3251
Mounting Bracket

270553251
1692-0090: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-27-022-0297
Mounting Bracket

270220297
KMS 0021-19: RNCC: 2 | RNVC: 1

26 Jan 2004

5340-27-045-2477
Mending Plate

270452477
5220B333: RNCC: 3 | RNVC: 2

17 Apr 2009

5340-27-055-5734
Mounting Bracket

270555734
84354398: RNCC: 3 | RNVC: 2

12 Dec 2011

5340-27-048-7943
Access Cover

270487943
9034-20: RNCC: 2 | RNVC: 1
9034-20: RNCC: 5 | RNVC: 9

2 Mar 2010

5340-27-055-2160
Mounting Bracket

270552160
1692-0217: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-022-0930
Loop Clamp

270220930
16219-MBB-000: RNCC: 2 | RNVC: 1
90465-10098-00: RNCC: 2 | RNVC: 1

9 Feb 2004

5340-27-053-7713
Loop Clamp

270537713
N07/8205963: RNCC: 2 | RNVC: 1

17 Jun 2011

5340-27-033-6531
Angle Bracket

270336531
40-205-4052: RNCC: 2 | RNVC: 1
40-205-4052: RNCC: 2 | RNVC: 1

9 Nov 2006

5340-27-028-7601
Mounting Bracket

270287601
884-5810-949: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-038-8653
Mounting Bracket

270388653
65506-5K300: RNCC: 5 | RNVC: 9

2 Nov 2007

5340-27-020-9505
Mending Plate

270209505
1010FG-0000331: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-025-6923
Mending Plate

270256923
H24C6-40902: RNCC: 2 | RNVC: 1

29 Mar 2005

5340-27-021-9888
Mending Plate

270219888
1009 1AD 0029/1: RNCC: 2 | RNVC: 1

20 Jan 2004

5340-27-034-6804
Loop Holder

270346804
8200145: RNCC: 2 | RNVC: 1

1 Feb 2007

5340-27-020-3204
Lock Key

270203204
3.03.07.09: RNCC: 2 | RNVC: 1

2 Dec 2003

5340-27-001-7374
Bow Handle

270017374
TM55-1520-210-2204-030-829-11: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-021-3484
Mounting Bracket

270213484
1009.1KI.0264-1*1-6.4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-033-6363
Mounting Bracket

270336363
40-205-4065: RNCC: 2 | RNVC: 1
40-205-4065: RNCC: 2 | RNVC: 1
40-205-4065: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-012-8654
Access Cover

270128654
98012725: RNCC: 2 | RNVC: 1

28 Mar 2002

5340-27-042-9471
Bridge Clamp

270429471
40.205.3473: RNCC: 2 | RNVC: 1
40.205.3473: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-024-2381
Tubular Fairlead

270242381
73-3542-0175: RNCC: 2 | RNVC: 1

5 Oct 2004

5340-27-021-0460
Mounting Bracket

270210460
1009.1KI.0339-10: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-052-3860
Mounting Bracket

270523860
72C03-68538-AA: RNCC: 2 | RNVC: 1

17 Jan 2011

5340-27-015-0430
Loop Clamp

270150430
7770038: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-006-8262
Flush Catch Claw

270068262
062000112: RNCC: 2 | RNVC: 1

18 May 1999

5340-27-056-9203
Tee Hinge

270569203
CH01-01-053: RNCC: 2 | RNVC: 1

31 May 2012

5340-27-018-3459
Truss Fairlead

270183459
10121YM5562: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-4097
Mounting Bracket

270214097
1009.1KI.0223-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-7857
Mending Plate

270207857
1009.1KI.0236-5*2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-025-9505
Plug Button

270259505
SS48162K2215: RNCC: 2 | RNVC: 1

9 May 2005

5340-27-047-9350
Bow Handle

270479350
180-085: RNCC: 3 | RNVC: 2

24 Dec 2009

5340-27-027-8408
Mending Plate

270278408
72A15-72552-AA: RNCC: 2 | RNVC: 1

10 Nov 2005

5340-27-057-7460
Mounting Bracket

270577460
5083050: RNCC: 2 | RNVC: 1

9 Oct 2012

5340-27-050-0708
Mending Plate

270500708
104647: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-007-6910
Fusible Plug

270076910
6009-0517-5016: RNCC: 2 | RNVC: 1
6009-0517-5016: RNCC: 2 | RNVC: 1

19 Jan 2000

5340-27-038-7204
Mounting Bracket

270387204
4185873: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-023-1294
Mounting Bracket

270231294
2ABM 0029: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-049-5011
Mending Plate

270495011
108070: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-048-5780
Mending Plate

270485780
HD341107SY: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-042-5688
Mending Plate

270425688
54556824: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-052-7284
Mending Plate

270527284
10046600: RNCC: 2 | RNVC: 1

18 Feb 2011

5340-27-007-6010
Access Cover

270076010
99906913: RNCC: 2 | RNVC: 1

22 Dec 1999

5340-27-006-9067
Angle Bracket Set

270069067
A 436 520 70 92: RNCC: 2 | RNVC: 1
A 436 520 7092: RNCC: 5 | RNVC: 9

23 Jun 1999

5340-27-040-4139
Mounting Bracket

270404139
7737761: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-014-9269
Caster Wheel

270149269
2630-31968-00009: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-001-2950
Loop Clamp

270012950
205-030-407-165: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-006-9407
Mounting Bracket

270069407
91AB 17B943 AB: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-026-9735
Mounting Bracket

270269735
73 3571 3166: RNCC: 2 | RNVC: 1

16 Aug 2005

5340-27-012-5905
Angle Bracket

270125905
3011R21700001: RNCC: 2 | RNVC: 1

14 Feb 2002

5340-27-055-1801
Bumper

270551801
121C07: RNCC: 3 | RNVC: 1

17 Nov 2011

5340-27-053-9662
Mounting Bracket

270539662
55RS551853: RNCC: 2 | RNVC: 1

12 Jul 2011

5340-27-020-3078
Access Cover

270203078
27648: RNCC: 2 | RNVC: 1

1 Dec 2003

5340-27-048-7956
Mounting Bracket

270487956
9034-99: RNCC: 2 | RNVC: 1
9034-99: RNCC: 5 | RNVC: 9

2 Mar 2010

5340-27-010-5096
Bridge Clamp

270105096
83VB 5270 AA: RNCC: 2 | RNVC: 1

27 Nov 2001

5340-27-021-0338
Mounting Bracket

270210338
1009.1KI.0353-6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-9919
Mounting Bracket

270579919
50151-ZY3-000: RNCC: 2 | RNVC: 1

27 Nov 2012

5340-27-016-6774
Bridge Clamp

270166774
83.97401.0508: RNCC: 2 | RNVC: 1

26 Feb 2003

5340-27-022-6905
Mending Plate

270226905
40J6 10: RNCC: 2 | RNVC: 1

8 Apr 2004

5340-27-057-5415
Mounting Bracket

270575415
ALTFC01008: RNCC: 2 | RNVC: 1

28 Aug 2012

5340-27-057-2626
Flush Catch

270572626
KI046228-3: RNCC: 2 | RNVC: 1

11 Jul 2012

5340-27-039-7881
Bow Handle

270397881
897404316051: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-024-6549
Loop Clamp

270246549
5116796: RNCC: 2 | RNVC: 1

25 Nov 2004

5340-27-015-1984
Caster Wheel

270151984
10121HT0171: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-026-7438
Bow Handle

270267438
MR732130: RNCC: 2 | RNVC: 1

26 Jul 2005

5340-27-038-8421
Loop Clamp

270388421
83A18-73232-AA: RNCC: 2 | RNVC: 1

1 Nov 2007

5340-27-042-1947
Utility Access Door

270421947
150X200 CIFT KANATLI DEMIR: RNCC: 2 | RNVC: 1

25 Jul 2008

5340-27-015-0339
Access Cover

270150339
10887988: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-050-1588
Bow Handle

270501588
102991: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-015-6791
Loop Clamp

270156791
05001FK0066: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-013-5970
Access Cover

270135970
4169286-1: RNCC: 2 | RNVC: 1

2 Jul 2002

5340-27-055-1486
Bow Handle

270551486
98022287: RNCC: 2 | RNVC: 2

16 Nov 2011

5340-27-035-3029
Mounting Bracket

270353029
3C46E508A17AB: RNCC: 2 | RNVC: 1

7 Mar 2007

5340-27-014-7563
Padlock

270147563
134210032: RNCC: 2 | RNVC: 1

26 Nov 2002

5340-27-015-0426
Loop Clamp

270150426
7755845: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-055-9920
Mounting Bracket

270559920
102-F490-2340-006-000-A: RNCC: 2 | RNVC: 1

24 Jan 2012

5340-27-029-9094
Bridge Clamp

270299094
4H7-23441-01-98: RNCC: 2 | RNVC: 1

5 Jun 2006

5340-27-053-7676
Loop Clamp

270537676
5421624: RNCC: 2 | RNVC: 1

16 Jun 2011

5340-27-058-3615
Mending Plate

270583615
CV67758: RNCC: 2 | RNVC: 1

16 Jan 2013

5340-27-015-0349
Loop Clamp

270150349
7057332: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-053-3672
Mounting Bracket

270533672
H231101201: RNCC: 2 | RNVC: 1

25 Apr 2011

5340-27-055-0141
Catch Strike

270550141
72C09-73140-AA: RNCC: 2 | RNVC: 1

28 Oct 2011

5340-27-054-7628
Access Cover

270547628
100488: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-013-9097
Mending Plate

270139097
388880582001: RNCC: 2 | RNVC: 1

7 Aug 2002

5340-27-024-2973
Mounting Bracket

270242973
1010FG-1831165: RNCC: 2 | RNVC: 1

8 Oct 2004

5340-27-040-5187
Mounting Bracket

270405187
8763046: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-044-1240
Mounting Bracket

270441240
12E00-55596-AA: RNCC: 2 | RNVC: 1

9 Jan 2009

5340-27-038-2042
Mounting Bracket

270382042
1010FK-2702007: RNCC: 2 | RNVC: 1

20 Sep 2007

5340-27-056-6663
Mounting Bracket

270566663
MM-7412-0256: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-024-9744
Mortise Lock

270249744
94CT-E21813-AB: RNCC: 2 | RNVC: 1

22 Dec 2004

5340-27-025-0859
Angle Bracket

270250859
3120-ATF-0157: RNCC: 2 | RNVC: 1

1 Dec 2004

5340-27-044-2036
Catch Strike

270442036
12E00-78341-AB: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-046-6785
Extension Handle

270466785
Y533-71405-200: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-053-6856
Mending Plate

270536856
C171-500020: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-27-028-4641
Mounting Bracket

270284641
72A06-30373-AA: RNCC: 2 | RNVC: 1

3 Jan 2006

5340-27-059-6625
Loop Clamp

270596625
901-KL-367: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-022-8275
Hand Crank

270228275
05001FK0091: RNCC: 2 | RNVC: 1

23 Apr 2004

5340-27-008-5910
Access Cover

270085910
4566230625: RNCC: 2 | RNVC: 1

17 Nov 2000

5340-27-007-1832
Access Cover

270071832
E 852099 S: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-009-6865
Mounting Bracket

270096865
9147 25: RNCC: 2 | RNVC: 1

16 Aug 2001

5340-27-018-6810
Rod End Connector

270186810
HSN06-024: RNCC: 2 | RNVC: 1
1010FG-1803260: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-3581
Mounting Bracket

270403581
8694130: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-059-3692
Loop Clamp

270593692
VOE20971607: RNCC: 3 | RNVC: 2

23 Jul 2013

5340-27-055-5742
Catch Strike

270555742
5094377: RNCC: 3 | RNVC: 2

12 Dec 2011

5340-27-049-4765
Mounting Bracket

270494765
107289: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-027-0049
Support Hook

270270049
2ABMK01678: RNCC: 2 | RNVC: 1

18 Aug 2005

5340-27-034-2390
Catch Strike

270342390
BILYALI CIT CIT: RNCC: 2 | RNVC: 1

19 Dec 2006

5340-27-021-0188
Strap Hinge Leaf

270210188
1009.1KI.0190-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-029-0597
Catch Strike

270290597
72A06-55510-AA: RNCC: 2 | RNVC: 1

28 Feb 2006

5340-27-050-8503
Access Cover

270508503
6G5-43145-00: RNCC: 3 | RNVC: 2
6G5-43145-00: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-054-8110
Mounting Bracket

270548110
1010FMA-0005040: RNCC: 2 | RNVC: 1

17 Oct 2011

5340-27-058-1718
Mending Plate

270581718
YK0005: RNCC: 2 | RNVC: 1

18 Dec 2012

5340-27-044-0888
Eye Hook

270440888
A7-210: RNCC: 2 | RNVC: 1

6 Jan 2009

5340-27-051-4803
Mounting Bracket

270514803
400266-000: RNCC: 3 | RNVC: 2

1 Nov 2010

5340-27-052-7091
Loop Clamp

270527091
DIN3016-1-D1-30-15-W3-CR: RNCC: 2 | RNVC: 2

17 Feb 2011

5340-27-027-2592
Angle Bracket

270272592
15-01-633-001: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-043-7949
Mending Plate

270437949
M10-M: RNCC: 2 | RNVC: 1
M10-M: RNCC: 2 | RNVC: 1

16 Dec 2008

5340-27-011-3805
Mounting Bracket

270113805
79GB F27470 AA: RNCC: 2 | RNVC: 1

13 Dec 2001

5340-27-051-7207
Mounting Bracket

270517207
314E19: RNCC: 2 | RNVC: 1

23 Nov 2010

5340-27-054-4507
Mounting Bracket

270544507
5B33445: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-27-054-6668
Mounting Bracket

270546668
55RS860271: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-043-2983
Mounting Bracket

270432983
74A05-62095-AA: RNCC: 2 | RNVC: 1

24 Oct 2008

5340-27-059-6836
Loop Clamp

270596836
901-KL-401: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-050-9867
Locking Stay

270509867
63D-15771-00-4D: RNCC: 3 | RNVC: 2
63D-15771-00-4D: RNCC: 3 | RNVC: 2

21 Sep 2010

5340-27-015-0301
Loop Clamp

270150301
10921562: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-032-3295
Mounting Bracket

270323295
83A00-57136-AA: RNCC: 2 | RNVC: 1

21 Jun 2006

5340-27-053-8357
Lock Bolt

270538357
C122-000280: RNCC: 3 | RNVC: 2

28 Jun 2011

5340-27-013-4057
Loop Clamp

270134057
88.97401.0073: RNCC: 2 | RNVC: 1
90464-15195-00: RNCC: 2 | RNVC: 1

13 Jun 2002

5340-27-025-8754
Mounting Bracket

270258754
1010FG-1803290-1: RNCC: 2 | RNVC: 1

22 Apr 2005

5340-27-055-9117
Mounting Bracket

270559117
102186: RNCC: 2 | RNVC: 2

13 Jan 2012

5340-27-029-3301
Mounting Bracket

270293301
XS4Q6K565AG: RNCC: 2 | RNVC: 1

21 Mar 2006

5340-27-014-6482
Expansion Plug

270146482
5999-0311-1035: RNCC: 2 | RNVC: 1
5999-0311-1035: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-051-1436
Mounting Bracket

270511436
16F10-12180-AA: RNCC: 2 | RNVC: 1

6 Oct 2010

5340-27-048-0522
Bow Handle

270480522
A2207300116: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-016-8853
Filler Opening Cap

270168853
0600-0307F02: RNCC: 2 | RNVC: 1

2 Apr 2003

5340-27-021-4599
Handle Grip

270214599
29-14-14-01: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-2131
Mounting Bracket

270212131
1012.1HSCA.01-03: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-0185
Strap Hinge Leaf

270210185
1009.1KI.0189-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-8348
Bow Handle

270288348
71B22-60634-AA: RNCC: 2 | RNVC: 1

10 Feb 2006

5340-27-002-9852
Loop Clamp

270029852
205-030-919-019: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-049-6246
Mounting Bracket

270496246
1010FG-0302062: RNCC: 2 | RNVC: 1

13 May 2010

5340-27-056-7218
Mounting Bracket

270567218
ADOP-SHELTER-180-AAA: RNCC: 2 | RNVC: 1

2 May 2012

5340-27-017-7916
Angle Bracket

270177916
12268690: RNCC: 2 | RNVC: 1

4 Sep 2003

5340-27-026-4961
Angle Bracket

270264961
209-071-277-1: RNCC: 2 | RNVC: 1

11 Jul 2005

5340-27-005-6295
Angle Bracket

270056295
86VB-V237A70-AD: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-050-6926
Bridge Clamp

270506926
CDS-100.01: RNCC: 5 | RNVC: 9

19 Aug 2010

5340-27-004-3224
Angle Bracket

270043224
05001YP0159: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-048-4460
Bow Handle

270484460
6020673: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-27-056-6628
Mounting Bracket

270566628
6009-0519-9002: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-005-8085
Sliding Door Hanger

270058085
86VB-V25028-AL: RNCC: 3 | RNVC: 2

16 Feb 1998

5340-27-025-1191
Mounting Bracket

270251191
2510-ATF-0161: RNCC: 2 | RNVC: 1

10 Jan 2005

5340-27-015-8681
Mortise Lock

270158681
99999-NIIN-DA0052446: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-055-1638
Door Holder

270551638
5945-ED-287-0058: RNCC: 2 | RNVC: 2

17 Nov 2011

5340-27-027-9538
Mounting Bracket

270279538
6040-4037-3023: RNCC: 2 | RNVC: 1

21 Nov 2005

5340-27-051-6806
Mending Plate

270516806
3EC-60-12170: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-27-057-9512
Mounting Bracket

270579512
32101-ZZ3-000: RNCC: 2 | RNVC: 1

21 Nov 2012

5340-27-025-5796
Handle Grip

270255796
HRA22A7406 514A2-72401: RNCC: 2 | RNVC: 1

24 Mar 2005

5340-27-049-6133
Bridge Clamp

270496133
1010FG-0302066: RNCC: 2 | RNVC: 1

13 May 2010

5340-27-046-6445
Bow Handle

270466445
3MV85605-0001: RNCC: 2 | RNVC: 2

17 Sep 2009

5340-27-009-7814
Padlock

270097814
RSY-0000SV2100-M07: RNCC: 2 | RNVC: 1
KAPI KILIDI: RNCC: 2 | RNVC: 1

5 Sep 2001

5340-27-005-1709
Access Cover

270051709
1010001560: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-044-5699
Stand Base

270445699
141A-101: RNCC: 2 | RNVC: 1
141A-101: RNCC: 5 | RNVC: 9

17 Feb 2009

5340-27-059-2876
Access Cover

270592876
CM012018-20: RNCC: 2 | RNVC: 1

8 Jul 2013

5340-27-015-8679
Mortise Lock

270158679
99999-NIIN-DA0052444: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-038-1073
Mounting Bracket

270381073
944-65-402: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-019-7814
Flush Catch Claw

270197814
05001DT0029: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-046-6778
Access Cover

270466778
Y255-71002-000: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-010-2575
Mounting Bracket

270102575
10131YT0574: RNCC: 2 | RNVC: 1

20 Nov 2001

5340-27-056-6659
Mounting Bracket

270566659
ADOP-SHELTER-180-BTSA: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-017-4235
Angle Bracket

270174235
EIBM-AA4-900-I-14: RNCC: 2 | RNVC: 1

20 Feb 2004

5340-27-021-3086
Mending Plate

270213086
1012.1HSCA.03-01: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-6349
Angle Bracket

270596349
901-DS-142: RNCC: 2 | RNVC: 1

20 Sep 2013

5340-27-051-7665
Mending Plate

270517665
16F10-56128-AA: RNCC: 2 | RNVC: 1

25 Nov 2010

5340-27-040-8011
Mending Plate

270408011
ME605466: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-054-8031
Mending Plate

270548031
202609: RNCC: 2 | RNVC: 2

14 Oct 2011

5340-27-032-3459
Handle Ferrule

270323459
1.HIBM-1H-1109: RNCC: 2 | RNVC: 1

23 Jun 2006

5340-27-032-9909
Mounting Bracket

270329909
FCT E22042 AA: RNCC: 2 | RNVC: 1

6 Oct 2006

5340-27-010-2562
Mechanical Stop

270102562
98005775: RNCC: 2 | RNVC: 1

20 Nov 2001

5340-27-032-6296
Mounting Bracket

270326296
13D00-76229-AA: RNCC: 2 | RNVC: 1

25 Aug 2006

5340-27-028-7924
Mounting Bracket

270287924
884-5840-801: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-043-3571
Bumper

270433571
MM-7550-0708: RNCC: 2 | RNVC: 1

31 Oct 2008

5340-27-054-3232
Loop Clamp

270543232
CMD-101: RNCC: 5 | RNVC: 9

18 Aug 2011

5340-27-056-8640
Mending Plate

270568640
98000557-3: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-028-8558
Mounting Bracket

270288558
MM-7450-0096-KNM-12: RNCC: 2 | RNVC: 1

13 Feb 2006

5340-27-040-4527
Mounting Bracket

270404527
8200315: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-038-8581
Mounting Bracket

270388581
2ABEP00306: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-056-4493
Mending Plate

270564493
202850: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-022-6225
Mounting Bracket

270226225
23300T: RNCC: 2 | RNVC: 1

31 Mar 2004

5340-27-058-2728
Mending Plate

270582728
MM-7490-0076: RNCC: 2 | RNVC: 1

2 Jan 2013

5340-27-058-0158
Mending Plate

270580158
50388-ZY3-U00: RNCC: 2 | RNVC: 1

30 Nov 2012

5340-27-046-6777
Access Cover

270466777
Y255-71000-202: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-052-6920
Loop Clamp

270526920
DIN3016-1-D1-12-15-W3-CR: RNCC: 2 | RNVC: 2

15 Feb 2011

5340-27-056-8639
Mending Plate

270568639
98000557-2: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-004-5108
Access Cover

270045108
10121YK5088: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-028-6413
Mounting Bracket

270286413
1010005536: RNCC: 2 | RNVC: 1

25 Jan 2006

5340-27-029-1563
Mending Plate

270291563
388884947101: RNCC: 2 | RNVC: 1

6 Mar 2006

5340-27-022-0573
Mounting Bracket

270220573
1009 1IS 0068A-25: RNCC: 2 | RNVC: 1

29 Jan 2004

5340-27-040-4328
Mounting Bracket

270404328
10915275: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-047-8682
Catch Strike

270478682
13C22-57142-AA: RNCC: 3 | RNVC: 2

21 Dec 2009

5340-27-051-4811
Mounting Bracket

270514811
400266-006: RNCC: 3 | RNVC: 2

1 Nov 2010

5340-27-038-6278
Mounting Bracket

270386278
83A18-37094-AA: RNCC: 2 | RNVC: 1

23 Oct 2007

5340-27-028-6182
Loop Clamp

270286182
NAS1712D12-32N: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-040-2857
Angle Bracket

270402857
Y532-66018-200: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-021-1034
Loop Clamp

270211034
622324-L: RNCC: 2 | RNVC: 1
90462-08017-00: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-7679
Leakproof Seal Plug

270227679
2.05.01.06: RNCC: 2 | RNVC: 1
1932070310: RNCC: 2 | RNVC: 1

17 Apr 2004

5340-27-023-1662
Mounting Bracket

270231662
10121YA5369: RNCC: 2 | RNVC: 1

2 Jun 2004

5340-27-058-3017
Bow Handle

270583017
104020: RNCC: 2 | RNVC: 1

7 Jan 2013

5340-27-053-1012
Mounting Bracket

270531012
2.HIBM-4H-0666/1-A1/8/12 SOL: RNCC: 2 | RNVC: 1

28 Mar 2011

5340-27-056-6664
Mounting Bracket

270566664
ADOP-SHELTER-180-B: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-058-0924
Mounting Bracket

270580924
32112-ZY3-000: RNCC: 2 | RNVC: 1

7 Dec 2012

5340-27-015-8933
Mortise Lock

270158933
99999-NIIN-DA0020993: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-026-5706
Catch Strike

270265706
69410-33010: RNCC: 2 | RNVC: 1

13 Jul 2005

5340-27-040-6023
Access Cover

270406023
Y532-68002-200: RNCC: 2 | RNVC: 1

4 Feb 2008

5340-27-042-0781
Catch Strike

270420781
13727: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-047-5656
Mortise Lock

270475656
KILIT,INCE: RNCC: 2 | RNVC: 1

9 Dec 2009

5340-27-047-9396
Caster Wheel

270479396
10X10CM: RNCC: 2 | RNVC: 1

24 Dec 2009

5340-27-012-2097
Mending Plate

270122097
10131YS0910: RNCC: 2 | RNVC: 1

18 Jan 2002

5340-27-041-9345
Bridge Clamp

270419345
32MM,CIFTLI: RNCC: 2 | RNVC: 1
32MM, PPRC, CIFTLI: RNCC: 2 | RNVC: 1
32 LIK PPRC CIFTLI KELEPCE: RNCC: 2 | RNVC: 1

2 Jul 2008

5340-27-033-0803
Mending Plate

270330803
5936164: RNCC: 2 | RNVC: 1

17 Oct 2006

5340-27-040-2853
Angle Bracket

270402853
Y535-76700-204: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-011-0228
Flush Catch

270110228
56-P-562 6-26: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-001-2952
Loop Clamp

270012952
205-030-407-168: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-039-3727
Catch Strike

270393727
KALE: RNCC: 2 | RNVC: 1

28 Nov 2007

5340-27-056-5339
Access Cover

270565339
3831855: RNCC: 2 | RNVC: 2

9 Apr 2012

5340-27-006-9500
Mounting Bracket

270069500
P93AG F279A33 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-021-4101
Mounting Bracket

270214101
1009.1KI.0264-2*1-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-012-1540
Mending Plate

270121540
10131YS0924: RNCC: 2 | RNVC: 1

16 Jan 2002

5340-27-055-2244
Mounting Bracket

270552244
1010FMA-0005300: RNCC: 3 | RNVC: 2

22 Nov 2011

5340-27-060-0363
Mounting Bracket

270600363
MM-7490-0195: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-059-9911
Eye Hook

270599911
901-KK-420: RNCC: 2 | RNVC: 1

20 Dec 2013

5340-27-050-9826
Mounting Bracket

270509826
689-81820-11: RNCC: 3 | RNVC: 2
689-81820-11: RNCC: 3 | RNVC: 2

21 Sep 2010

5340-27-055-2180
Mounting Bracket

270552180
1692-0054: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-060-0396
Mounting Bracket

270600396
MM-7490-0105: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-022-6202
Mounting Bracket

270226202
21495T: RNCC: 2 | RNVC: 1

31 Mar 2004

5340-27-009-8686
Mechanical Stop

270098686
4185060: RNCC: 2 | RNVC: 1

24 Sep 2001

5340-27-033-0579
Expansion Plug

270330579
51RS500821: RNCC: 2 | RNVC: 1

13 Oct 2006

5340-27-056-3238
Bumper

270563238
8000TE-36: RNCC: 5 | RNVC: 9

14 Mar 2012

5340-27-013-9573
Mounting Bracket

270139573
6040-0933-9014: RNCC: 2 | RNVC: 1
6040-0933-9014: RNCC: 2 | RNVC: 1

16 Aug 2002

5340-27-037-8119
Mounting Bracket

270378119
83A18-76228-AA: RNCC: 2 | RNVC: 1

27 Aug 2007

5340-27-043-8099
Mounting Bracket

270438099
12E00-01775-AA: RNCC: 2 | RNVC: 1

16 Dec 2008

5340-27-017-0041
Angle Bracket

270170041
98003386: RNCC: 2 | RNVC: 1

28 Apr 2003

5340-27-024-9917
Loop Clamp

270249917
05001FK0232: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-015-0360
Loop Clamp

270150360
7073023: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-058-3466
Mending Plate

270583466
M2945-009: RNCC: 2 | RNVC: 1

14 Jan 2013

Load More Results