What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 15 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 15 of 53

5340-27-054-5978
Mounting Bracket

270545978
55RS752941: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-048-6085
Catch Strike

270486085
TM150352Y: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-037-5364
Bow Handle

270375364
735303669: RNCC: 2 | RNVC: 1

3 Aug 2007

5340-27-045-9306
Loop Clamp

270459306
204OCT11209075: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-042-5685
Mending Plate

270425685
54554910: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-043-0268
Strap Hinge

270430268
MEKAL: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-021-4069
Mounting Bracket

270214069
1009.1KI.0296-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-018-6413
Loop Clamp

270186413
1010FG-0401330: RNCC: 2 | RNVC: 1
HSN06-014: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-051-4615
Mending Plate

270514615
72A58-36692-AA: RNCC: 2 | RNVC: 1

28 Oct 2010

5340-27-021-0536
Mending Plate

270210536
1010FK-0000310: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-032-8958
Mending Plate

270328958
KV4-0519: RNCC: 2 | RNVC: 1

27 Sep 2006

5340-27-023-0963
Mounting Bracket

270230963
1010FG-0000722: RNCC: 2 | RNVC: 1

27 May 2004

5340-27-032-6404
Mounting Bracket

270326404
T008-G1100-000: RNCC: 2 | RNVC: 1

28 Aug 2006

5340-27-043-8006
Lock-Release Lever

270438006
JNG90-70.E: RNCC: 2 | RNVC: 1

16 Dec 2008

5340-27-043-1334
Angle Bracket

270431334
TMS-P304-11: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-27-055-3382
Mounting Bracket

270553382
1692-0031: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-044-5749
Angle Bracket

270445749
Y532-68008-200: RNCC: 2 | RNVC: 1

18 Feb 2009

5340-27-050-3851
Mending Plate

270503851
105225: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-053-9663
Mounting Bracket

270539663
55RS551808: RNCC: 2 | RNVC: 1

12 Jul 2011

5340-27-008-2229
Ball Socket Seat

270082229
9330-0939-0002: RNCC: 2 | RNVC: 1
9330-0939-0002: RNCC: 2 | RNVC: 1

11 Aug 2000

5340-27-046-6775
Access Cover

270466775
Y255-71001-000: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-014-7055
Mounting Bracket

270147055
2901461-B: RNCC: 2 | RNVC: 1

15 Nov 2002

5340-27-014-7448
Truss Fairlead

270147448
505082100: RNCC: 2 | RNVC: 1

26 Nov 2002

5340-27-054-4224
Utility Access Door

270544224
CK-02: RNCC: 2 | RNVC: 1

9 Sep 2011

5340-27-036-2521
Leakproof Seal Plug

270362521
F-70-8556: RNCC: 2 | RNVC: 1
F-70-8556: RNCC: 2 | RNVC: 1

17 May 2007

5340-27-046-3685
Mending Plate

270463685
NRC4693-L: RNCC: 2 | RNVC: 1

31 Jul 2009

5340-27-022-8217
Loop Clamp

270228217
7.08.02.01: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-038-2229
Mounting Bracket

270382229
3583819: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-018-5081
Mounting Bracket

270185081
4900181030: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-015-0433
Loop Clamp

270150433
7978875: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-055-9322
Mounting Bracket

270559322
1010FG-0312903: RNCC: 2 | RNVC: 1

16 Jan 2012

5340-27-008-7061
Rod End Connector

270087061
DR-00102-0701: RNCC: 2 | RNVC: 1

19 Dec 2000

5340-27-014-3374
Loop Clamp

270143374
51.97401.6059: RNCC: 2 | RNVC: 1
90464-15195-00: RNCC: 2 | RNVC: 1

8 Oct 2002

5340-27-017-6380
Angle Bracket

270176380
388883717001: RNCC: 2 | RNVC: 1

12 Aug 2003

5340-27-020-5150
Angle Bracket

270205150
206-072-295-103: RNCC: 2 | RNVC: 1

10 Dec 2003

5340-27-021-4336
Mounting Bracket

270214336
1012.1HSCA.02-21: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-4586
Bow Handle

270214586
1010FK-2704187: RNCC: 2 | RNVC: 1
255-01-01-01-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-6636
Loop Clamp

270596636
901-KL-387: RNCC: 3 | RNVC: 2

25 Sep 2013

5340-27-059-8485
Mounting Bracket

270598485
1010FMA-0800650: RNCC: 2 | RNVC: 1

19 Nov 2013

5340-27-017-5060
Angle Bracket

270175060
MK1-3528-50: RNCC: 2 | RNVC: 1

4 Jul 2003

5340-27-059-5594
Angle Bracket

270595594
901-DS-134: RNCC: 2 | RNVC: 1

5 Sep 2013

5340-27-058-2166
Plug Button

270582166
24816-ZW5-U01: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-008-3271
Mounting Bracket

270083271
83/16 - 12: RNCC: 2 | RNVC: 1

18 Sep 2000

5340-27-047-4256
Mounting Bracket

270474256
150-13-02-01-06-294: RNCC: 2 | RNVC: 1
150-13-02-01-06-294: RNCC: 5 | RNVC: 9

2 Dec 2009

5340-27-058-2833
Access Cover

270582833
005187-000: RNCC: 2 | RNVC: 2

3 Jan 2013

5340-27-044-5778
Access Cover

270445778
Y532-66022-200: RNCC: 2 | RNVC: 1

18 Feb 2009

5340-27-019-1251
Handle Grip

270191251
8Y7-2474W-00: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-020-7895
Mounting Bracket

270207895
1009.1KI.0264-2*2-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-009-9586
Access Cover

270099586
98005786: RNCC: 2 | RNVC: 1

17 Oct 2001

5340-27-059-6931
Mounting Bracket

270596931
1010FMA-0005028: RNCC: 2 | RNVC: 1

30 Sep 2013

5340-27-051-0841
Access Cover

270510841
SZVL0101: RNCC: 3 | RNVC: 2

30 Sep 2010

5340-27-021-3073
Mending Plate

270213073
1012.1HSCA.02-46: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-042-1015
Catch Strike

270421015
58RS112613: RNCC: 2 | RNVC: 1

18 Jul 2008

5340-27-058-4419
Angle Bracket

270584419
M535E661220100: RNCC: 2 | RNVC: 1

31 Jan 2013

5340-27-027-8019
Catch Strike

270278019
71B21-73661-AA: RNCC: 2 | RNVC: 1

7 Nov 2005

5340-27-017-3877
Mounting Bracket

270173877
1009.1IS.0059-7C: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-059-2742
Mounting Bracket

270592742
55RS851444: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-042-0804
Catch Strike

270420804
47913: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-014-7549
Roller Holder

270147549
505112001: RNCC: 2 | RNVC: 1

26 Nov 2002

5340-27-001-8048
Vent Plug

270018048
PARTSCAT ALUG-7M1238: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-048-7674
Access Cover

270487674
9034-23: RNCC: 2 | RNVC: 1
9034-23: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-021-4028
Mounting Bracket

270214028
1012.1HSCA.03-46: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-027-9047
Mounting Bracket

270279047
2ABM1MK0092: RNCC: 2 | RNVC: 1

17 Nov 2005

5340-27-018-6550
Mounting Bracket

270186550
1010FG-1201758: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-3568
Mounting Bracket

270403568
2ABEP00535: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-017-3648
Mending Plate

270173648
1009.1IS.0071-B5: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-053-9447
Mending Plate

270539447
98018498: RNCC: 2 | RNVC: 2

11 Jul 2011

5340-27-044-1258
Mounting Bracket

270441258
12E00-55473-AB: RNCC: 2 | RNVC: 1

9 Jan 2009

5340-27-025-5747
Mounting Bracket

270255747
06318: RNCC: 2 | RNVC: 1

24 Mar 2005

5340-27-060-0487
Mounting Bracket

270600487
MM-7490-0294: RNCC: 2 | RNVC: 1

2 Jan 2014

5340-27-058-2726
Mending Plate

270582726
MM-7490-0074: RNCC: 2 | RNVC: 1

2 Jan 2013

5340-27-041-3633
Utility Access Door

270413633
102X204 CM AL: RNCC: 2 | RNVC: 1

15 May 2008

5340-27-044-1895
Mounting Bracket

270441895
17608-24: RNCC: 2 | RNVC: 1

14 Jan 2009

5340-27-040-3036
Bridge Clamp

270403036
5340-77777-00022: RNCC: 2 | RNVC: 1

18 Jan 2008

5340-27-016-8729
Elastic Strap

270168729
785200000: RNCC: 2 | RNVC: 1

26 Mar 2003

5340-27-018-6867
Mechanical Stop

270186867
1010FK-2710835: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-037-7112
Mending Plate

270377112
MK7520: RNCC: 2 | RNVC: 1

22 Aug 2007

5340-27-058-7506
Access Cover

270587506
VOE12746869: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-27-040-3506
Mounting Bracket

270403506
2ABEP00519: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-036-2445
Mounting Bracket

270362445
3C46E508A16AB: RNCC: 2 | RNVC: 1

16 May 2007

5340-27-051-4198
Bow Handle

270514198
102945: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-056-4630
Mending Plate

270564630
203566: RNCC: 2 | RNVC: 2

2 Apr 2012

5340-27-040-4447
Catch Strike

270404447
8200000664: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-004-5117
Access Cover

270045117
10121YK5254: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-010-2878
Mounting Bracket

270102878
336455-3: RNCC: 2 | RNVC: 1
336455-3: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-017-3535
Loop Holder

270173535
1009.1IS.0096-2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-035-6778
Sliding Door Track

270356778
46747084: RNCC: 2 | RNVC: 1

23 Mar 2007

5340-27-020-7823
Mending Plate

270207823
1009.1KI.0264-2*2-6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-046-0470
Utility Access Door

270460470
YANGIN KAPISI, 207X172CM: RNCC: 2 | RNVC: 1

2 Jul 2009

5340-27-015-0423
Loop Clamp

270150423
7735283: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-051-3226
Mounting Bracket

270513226
55RS860106: RNCC: 2 | RNVC: 1

15 Oct 2010

5340-27-029-2735
Angle Bracket

270292735
1010005556: RNCC: 2 | RNVC: 1

17 Mar 2006

5340-27-017-8189
Truss Fairlead

270178189
10131YM0139: RNCC: 2 | RNVC: 1
10131YM0139: RNCC: 5 | RNVC: 9

12 Sep 2003

5340-27-007-4433
Retaining Clip

270074433
91AG 17A613 BA: RNCC: 2 | RNVC: 1

11 Nov 1999

5340-27-023-7180
Bridge Clamp

270237180
22327T: RNCC: 2 | RNVC: 1

31 Jul 2004

5340-27-038-3307
Mounting Bracket

270383307
387003211101: RNCC: 2 | RNVC: 1

28 Sep 2007

5340-27-017-6382
Mounting Bracket

270176382
388880588101: RNCC: 2 | RNVC: 1

12 Aug 2003

5340-27-038-8594
Mounting Bracket

270388594
2ABEP00255: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-052-6973
Mounting Bracket

270526973
68 19 100 50R: RNCC: 2 | RNVC: 2

16 Feb 2011

5340-27-021-4086
Mounting Bracket

270214086
1009.1KI.0306-9*2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-029-5453
Loop Clamp

270295453
06.67840.0234: RNCC: 2 | RNVC: 1

10 Apr 2006

5340-27-023-0606
Mounting Bracket

270230606
336610-801: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-005-1712
Access Cover

270051712
1010001799: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-058-5608
Mending Plate

270585608
98023140: RNCC: 2 | RNVC: 1

21 Feb 2013

5340-27-017-3871
Mounting Bracket

270173871
1009.1IS.0058-15: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-036-9361
Catch Strike

270369361
387001626101: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-052-2428
Bridge Clamp

270522428
16F36-32166-AA: RNCC: 2 | RNVC: 1

28 Dec 2010

5340-27-040-3586
Mounting Bracket

270403586
10870518: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-053-6062
Mounting Bracket

270536062
897585240251: RNCC: 3 | RNVC: 2

26 May 2011

5340-27-025-4597
Mounting Bracket

270254597
H25S6-41303: RNCC: 2 | RNVC: 1

18 Mar 2005

5340-27-012-6153
Access Cover

270126153
98011111: RNCC: 2 | RNVC: 1

18 Feb 2002

5340-27-050-3877
Mending Plate

270503877
105569: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-003-9197
Hand Crank

270039197
07001MN0061: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-015-0367
Loop Clamp

270150367
7336030: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-027-1284
Flush Catch

270271284
10131YM2029: RNCC: 2 | RNVC: 1

7 Sep 2005

5340-27-051-1935
Mending Plate

270511935
16F36-32163-AB: RNCC: 2 | RNVC: 1

8 Oct 2010

5340-27-058-8730
Access Cover

270588730
VOE12737242: RNCC: 3 | RNVC: 2

18 Apr 2013

5340-27-013-0978
Mending Plate

270130978
81.97487.0344: RNCC: 2 | RNVC: 1

25 Apr 2002

5340-27-045-4087
Loop Clamp

270454087
53RS800778: RNCC: 2 | RNVC: 1

6 May 2009

5340-27-016-7627
Filler Opening Cap

270167627
2901214: RNCC: 2 | RNVC: 1
2941214: RNCC: 2 | RNVC: 1

12 Mar 2003

5340-27-028-4160
Bridge Clamp

270284160
72A08-73090-AA: RNCC: 5 | RNVC: 9

29 Dec 2005

5340-27-043-1975
Mounting Bracket

270431975
5-008-003: RNCC: 1 | RNVC: 2

20 Oct 2008

5340-27-050-8081
Mounting Bracket

270508081
6H4-11119-00: RNCC: 3 | RNVC: 2
6H4-11119-00: RNCC: 3 | RNVC: 2

1 Sep 2010

5340-27-037-3758
Catch Strike

270373758
83A11-55423-AA: RNCC: 2 | RNVC: 1

25 Jul 2007

5340-27-033-8739
Bow Handle

270338739
13C00-67209-AA: RNCC: 2 | RNVC: 1

24 Nov 2006

5340-27-058-5748
Barrel Bolt

270585748
CH62054: RNCC: 3 | RNVC: 2
CH62054: RNCC: 3 | RNVC: 2

22 Feb 2013

5340-27-046-7091
Mounting Bracket

270467091
2ABEP01159: RNCC: 2 | RNVC: 1

2 Oct 2009

5340-27-058-8389
Mounting Bracket

270588389
30294: RNCC: 2 | RNVC: 1

12 Apr 2013

5340-27-011-2442
Butt Hinge

270112442
07002YM0296: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-009-9366
Mounting Bracket

270099366
98012358: RNCC: 2 | RNVC: 1

12 Oct 2001

5340-27-017-3752
Hook Handle

270173752
1009.1IS.0062-3B: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-054-6708
Mounting Bracket

270546708
55RS860173: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-045-0489
Angle Bracket

270450489
10061074: RNCC: 2 | RNVC: 1

1 Apr 2009

5340-27-050-2250
Mending Plate

270502250
03.301.1015: RNCC: 2 | RNVC: 1

8 Jul 2010

5340-27-048-3860
Catch Strike

270483860
5421426: RNCC: 2 | RNVC: 1

5 Feb 2010

5340-27-028-2599
Bridge Clamp

270282599
PPRC 50 MM: RNCC: 5 | RNVC: 9

16 Dec 2005

5340-27-028-1769
Retaining Strap

270281769
13B00-51506-AA: RNCC: 2 | RNVC: 1

9 Dec 2005

5340-27-055-9359
Mounting Bracket

270559359
100553: RNCC: 2 | RNVC: 2

16 Jan 2012

5340-27-029-8766
Mounting Bracket

270298766
10131YB0889: RNCC: 2 | RNVC: 1

2 Jun 2006

5340-27-048-6094
Access Cover

270486094
7028: RNCC: 2 | RNVC: 1
7028: RNCC: 5 | RNVC: 9

16 Feb 2010

5340-27-058-6550
Mending Plate

270586550
ADOP.SHELTER-S8O-HUP: RNCC: 2 | RNVC: 1

5 Mar 2013

5340-27-044-7319
Bow Handle

270447319
81.62571-0076: RNCC: 3 | RNVC: 2

9 Mar 2009

5340-27-020-6335
Mounting Bracket

270206335
1009.1KI.0220-11*4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-016-3276
Bridge Clamp

270163276
82427415: RNCC: 2 | RNVC: 1

2 Jan 2003

5340-27-049-5189
Access Cover

270495189
HS20-MCT1225110: RNCC: 2 | RNVC: 1

5 May 2010

5340-27-041-4341
Mending Plate

270414341
500368578: RNCC: 2 | RNVC: 1

23 May 2008

5340-27-007-6915
Lock Key

270076915
5340-0965-1001: RNCC: 2 | RNVC: 1
1/4": RNCC: 2 | RNVC: 1
5340-0965-1001: RNCC: 2 | RNVC: 1

19 Jan 2000

5340-27-056-7101
Mounting Bracket

270567101
ADOP-SHELTER-180-BTA: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-024-2702
Mounting Bracket

270242702
73-3579-1218: RNCC: 2 | RNVC: 1

7 Oct 2004

5340-27-057-9918
Mounting Bracket

270579918
41179-ZY3-A00: RNCC: 2 | RNVC: 1

27 Nov 2012

5340-27-019-6429
Webbing Strap

270196429
05001HS0029: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-038-7574
Mounting Bracket

270387574
8200711: RNCC: 2 | RNVC: 1

31 Oct 2007

5340-27-041-1702
Utility Access Door

270411702
90X200 CM KAPI, AHSAP: RNCC: 2 | RNVC: 1

6 May 2008

5340-27-012-7025
Loop Clamp

270127025
53RS200054: RNCC: 2 | RNVC: 1

6 Mar 2002

5340-27-021-1731
Access Cover

270211731
1010FK-2710809: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-6520
Mounting Bracket

270576520
TT070477: RNCC: 2 | RNVC: 1

18 Sep 2012

5340-27-027-0168
Rod End Clevis

270270168
377770537001: RNCC: 2 | RNVC: 1

22 Aug 2005

5340-27-048-9659
Mending Plate

270489659
103700: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-007-1885
Mounting Bracket

270071885
A 435 792 70 98: RNCC: 2 | RNVC: 1

20 Sep 1999

5340-27-040-4674
Mounting Bracket

270404674
11615410-3: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-009-9327
Access Cover

270099327
98012345-1: RNCC: 2 | RNVC: 1

11 Oct 2001

5340-27-056-8667
Mending Plate

270568667
202126: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-021-1289
Mending Plate

270211289
1010FG-0000701: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-027-8406
Mending Plate

270278406
72A15-55095-AA: RNCC: 2 | RNVC: 1

10 Nov 2005

5340-27-038-9533
Mending Plate

270389533
83A24-73282-AA: RNCC: 2 | RNVC: 1

6 Nov 2007

5340-27-035-0816
Retaining Clip

270350816
710407: RNCC: 2 | RNVC: 1

26 Feb 2007

5340-27-033-0475
Butt Hinge

270330475
PRODCSTL1342: RNCC: 2 | RNVC: 1

12 Oct 2006

5340-27-041-8493
Mounting Bracket

270418493
16001YS0146: RNCC: 2 | RNVC: 1

24 Jun 2008

5340-27-053-7770
Access Cover

270537770
MI-B-100-P-04-43620/3: RNCC: 5 | RNVC: 9

17 Jun 2011

5340-27-023-0086
Mounting Bracket

270230086
1010FG-0000774: RNCC: 2 | RNVC: 1

12 May 2004

5340-27-059-7732
Mending Plate

270597732
83A63-76756-AA: RNCC: 2 | RNVC: 1

1 Nov 2013

5340-27-053-7357
Mending Plate

270537357
C171-500060: RNCC: 2 | RNVC: 2

13 Jun 2011

5340-27-009-1989
Angle Bracket

270091989
98005345: RNCC: 2 | RNVC: 1

23 May 2001

5340-27-056-3380
Mounting Bracket

270563380
3834236: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-27-036-2038
Mounting Bracket

270362038
90CT5929AE: RNCC: 2 | RNVC: 1

14 May 2007

5340-27-024-7033
Mounting Bracket

270247033
RC-1626-H2: RNCC: 2 | RNVC: 1

26 Nov 2004

5340-27-020-7541
Mending Plate

270207541
1009.1KI.0077-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-8117
Lock Bolt

270058117
878T-7M076-BA: RNCC: 3 | RNVC: 2

16 Feb 1998

5340-27-052-0033
Rod Retainer Clip

270520033
206-072-295-101: RNCC: 2 | RNVC: 1

13 Dec 2010

5340-27-024-3353
Mending Plate

270243353
L-110: RNCC: 2 | RNVC: 1

13 Oct 2004

5340-27-007-3519
Retaining Clip

270073519
W 703768 S305: RNCC: 2 | RNVC: 1

24 Oct 1999

5340-27-013-3916
Catch Strike

270133916
7700423922: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-048-6008
Catch Strike

270486008
901-KP-215-4: RNCC: 2 | RNVC: 1

16 Feb 2010

5340-27-028-6151
Mounting Bracket

270286151
MM-7450-0096-KNM39: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-021-3361
Mending Plate

270213361
1012.1HSCA.02-30: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-1738
Retaining Clip

270071738
E 865482 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-055-9116
Mounting Bracket

270559116
102168: RNCC: 2 | RNVC: 2

13 Jan 2012

5340-27-017-4939
Access Cover

270174939
3.06.14.05: RNCC: 2 | RNVC: 1

2 Jul 2003

5340-27-040-2849
Angle Bracket

270402849
Y535-75002-212: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-021-4075
Mounting Bracket

270214075
1009.1KI.0104-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-014-9273
Caster Wheel

270149273
2630-31968-00013: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-017-9397
Mounting Bracket

270179397
1009 1YY 7009: RNCC: 2 | RNVC: 1

14 Oct 2003

5340-27-059-2738
Mounting Bracket

270592738
55RS760083: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-023-5399
Webbing Strap

270235399
8690503: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-046-0010
Bail Handle

270460010
111T418-2: RNCC: 2 | RNVC: 1

29 Jun 2009

5340-27-042-6632
Swivel Caster

270426632
5340KK0043530: RNCC: 2 | RNVC: 1
DONME TASIMALI: RNCC: 2 | RNVC: 1

4 Sep 2008

5340-27-023-9361
Angle Bracket

270239361
3103-1: RNCC: 2 | RNVC: 1

24 Aug 2004

5340-27-048-4738
Mounting Bracket

270484738
1.HIBM-1I-2931D01: RNCC: 2 | RNVC: 1

11 Feb 2010

5340-27-021-4106
Mounting Bracket

270214106
1009.1KI.0266-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-7828
Mending Plate

270207828
1009.1KI.0132-6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-8211
Loop Clamp

270228211
83A00-38248-AA: RNCC: 2 | RNVC: 1
7.03.12.01: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-055-8216
Sliding Door Track

270558216
1C15V25004AL: RNCC: 2 | RNVC: 1

6 Jan 2012

5340-27-015-0556
Loop Clamp

270150556
7057332-3: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-016-9318
Loop Clamp

270169318
06.67300.5046: RNCC: 2 | RNVC: 1
90464-20008-00: RNCC: 2 | RNVC: 1

11 Apr 2003

5340-27-045-0935
Access Cover

270450935
901-RK-76: RNCC: 2 | RNVC: 1

6 Apr 2009

5340-27-021-1904
Mounting Bracket

270211904
1012.1HSCA.02-02: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-3487
Mounting Bracket

270213487
1009.1KI.0319-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-023-1226
Mounting Bracket

270231226
1010FG-0000400: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-050-4763
Catch Strike

270504763
KD-012/10-211: RNCC: 2 | RNVC: 1

30 Jul 2010

5340-27-020-7534
Mounting Bracket

270207534
1009.1KI.0303-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-042-6771
Mounting Bracket

270426771
577509-L: RNCC: 2 | RNVC: 1

4 Sep 2008

5340-27-046-6783
Extension Handle

270466783
Y533-71405-000: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-017-3727
Eye Hook

270173727
1009.1IS.0097-2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-036-2371
Sliding Door Track

270362371
3C46E513A12AA: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-035-8944
Butt Hinge

270358944
5340ATF0012: RNCC: 2 | RNVC: 1

5 Apr 2007

5340-27-021-5350
Mending Plate

270215350
1010FG-0000359: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-011-0229
Flush Catch

270110229
1005-77777-00002: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-060-0365
Mounting Bracket

270600365
MM-7490-0197: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-039-3409
Lock Key

270393409
27001-106: RNCC: 2 | RNVC: 1

27 Nov 2007

5340-27-057-9550
Mounting Bracket

270579550
32128-ZY3-000: RNCC: 2 | RNVC: 1

22 Nov 2012

5340-27-048-6701
Bridge Clamp

270486701
81.97460-6050: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-27-027-2559
Angle Bracket

270272559
15-01-114-001: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-001-2994
Loop Clamp

270012994
205-030-774-007: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-048-7297
Mounting Bracket

270487297
5420953: RNCC: 2 | RNVC: 1

24 Feb 2010

5340-27-054-7944
Butt Hinge Leaf

270547944
901-VM-20-8: RNCC: 2 | RNVC: 1

14 Oct 2011

5340-27-056-6661
Mounting Bracket

270566661
ADOP-SHELTER-180-IT: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-042-7349
Compression Cup

270427349
1010006214: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-053-8381
Mending Plate

270538381
C129-930320: RNCC: 2 | RNVC: 2

28 Jun 2011

5340-27-056-7067
Mounting Bracket

270567067
ADOP-SHELTER-180-KK8: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-046-2610
Mortise Lock

270462610
SILINDIRLI KILIT-DAR TIP: RNCC: 2 | RNVC: 1
KILIT,DAR TIP: RNCC: 2 | RNVC: 1

24 Jul 2009

5340-27-017-4062
Utility Access Door

270174062
1009.1IS.0067: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-032-5016
Mounting Bracket

270325016
T270-G4200-200: RNCC: 2 | RNVC: 1

26 Jul 2006

5340-27-054-6773
Detent Plunger

270546773
13599-3: RNCC: 3 | RNVC: 2

6 Oct 2011

5340-27-056-8774
Mounting Bracket

270568774
203135: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-026-1964
Mounting Bracket

270261964
06 08 177 600: RNCC: 2 | RNVC: 1

16 Jun 2005

5340-27-015-0456
Loop Clamp

270150456
10903862: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-055-5756
Access Cover

270555756
87573792: RNCC: 3 | RNVC: 2

12 Dec 2011

5340-27-010-1935
Access Cover

270101935
98011030: RNCC: 2 | RNVC: 1

14 Nov 2001

5340-27-053-9842
Mounting Bracket

270539842
72C07-61410-AA: RNCC: 3 | RNVC: 2

13 Jul 2011

5340-27-059-6930
Mounting Bracket

270596930
1010FMA-0005025: RNCC: 2 | RNVC: 1

30 Sep 2013

5340-27-055-0289
Access Cover

270550289
6111.5400: RNCC: 2 | RNVC: 1

31 Oct 2011

5340-27-017-2191
Angle Bracket

270172191
ME-01-0031-50: RNCC: 2 | RNVC: 1

29 May 2003

5340-27-028-7955
Mending Plate

270287955
35002003: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-050-1564
Mending Plate

270501564
107417: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-006-9554
Catch Strike

270069554
86AB A21982 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-054-4242
Mending Plate

270544242
98020959: RNCC: 3 | RNVC: 2

9 Sep 2011

5340-27-045-7682
Mending Plate

270457682
10029204: RNCC: 2 | RNVC: 1

11 Jun 2009

5340-27-046-6799
Access Cover

270466799
Y532-67500-200: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-025-7364
Access Cover

270257364
MS17DD17-2-117: RNCC: 2 | RNVC: 1

4 Apr 2005

5340-27-005-1692
Access Cover

270051692
1010000247: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-006-8267
Mounting Plate

270068267
062000110: RNCC: 2 | RNVC: 1

18 May 1999

5340-27-028-8044
Mending Plate

270288044
35004269: RNCC: 2 | RNVC: 1

8 Feb 2006

5340-27-035-5952
Mending Plate

270355952
72B04-61402-AA: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-048-9619
Mending Plate

270489619
103645: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-058-3668
Mending Plate

270583668
CV72063: RNCC: 2 | RNVC: 1

17 Jan 2013

5340-27-007-8208
Mounting Bracket

270078208
8162: RNCC: 2 | RNVC: 1

28 Feb 2000

5340-27-055-3252
Mounting Bracket

270553252
1692-0091: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-27-004-5532
Loop Clamp

270045532
10091YK5049: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-025-7574
Mounting Bracket

270257574
82660: RNCC: 2 | RNVC: 1

6 Apr 2005

5340-27-028-7827
Bow Handle

270287827
884-5810-961: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-037-1156
Flush Catch

270371156
CP0947004: RNCC: 2 | RNVC: 1

13 Jul 2007

5340-27-048-9893
Rod End Clevis

270489893
108559: RNCC: 3 | RNVC: 2

23 Mar 2010

5340-27-025-8472
Bow Handle

270258472
19611T: RNCC: 2 | RNVC: 1

19 Apr 2005

5340-27-036-0101
Handle Grip

270360101
13C00-68530-AA: RNCC: 2 | RNVC: 1

18 Apr 2007

5340-27-059-6425
Loop Clamp

270596425
901-KL-327: RNCC: 2 | RNVC: 1

23 Sep 2013

5340-27-005-8112
Vent Plug

270058112
878T-7L282-AA: RNCC: 3 | RNVC: 2

16 Feb 1998

5340-27-058-0520
Mending Plate

270580520
24881-ZV5-000: RNCC: 2 | RNVC: 1

5 Dec 2012

5340-27-051-4135
Mending Plate

270514135
108043: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-048-2659
Utility Access Door

270482659
269.05: RNCC: 2 | RNVC: 1

22 Jan 2010

5340-27-028-4161
Bridge Clamp

270284161
72A08-73080-AA: RNCC: 5 | RNVC: 9

29 Dec 2005

5340-27-055-4131
Flush Catch

270554131
5095823: RNCC: 2 | RNVC: 2

5 Dec 2011

5340-27-026-1313
Catch Strike

270261313
8B100361: RNCC: 2 | RNVC: 1

8 Jun 2005

5340-27-050-7297
Mounting Bracket

270507297
79C00-68514-AA: RNCC: 2 | RNVC: 1

23 Aug 2010

5340-27-056-3599
Access Cover

270563599
3831819: RNCC: 3 | RNVC: 2

19 Mar 2012

5340-27-029-8863
T Bracket

270298863
901-KT-187: RNCC: 2 | RNVC: 1

2 Jun 2006

5340-27-059-7678
Mounting Bracket

270597678
9999-0000-0347: RNCC: 2 | RNVC: 1

31 Oct 2013

5340-27-005-1573
Loop Clamp

270051573
1010001913: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-051-2604
Mounting Bracket

270512604
55RS360134: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-27-021-2133
Mounting Bracket

270212133
1012.1HSCA.02-33: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-0179
Lever Bracket

270210179
1009.1KI.0101-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-023-3722
Mounting Bracket

270233722
L: RNCC: 2 | RNVC: 1

24 Jun 2004

5340-27-040-2850
Angle Bracket

270402850
Y535-75002-236: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-024-9463
Compression Cup

270249463
KP38-K: RNCC: 2 | RNVC: 1
R2 KP38-K: RNCC: 5 | RNVC: 9

18 Dec 2004

5340-27-021-4003
Mounting Bracket

270214003
1012.1HSCA.02-40: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-6866
Access Cover

270556866
H346104105: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-021-8028
Expansion Plug

270218028
10121YT5520: RNCC: 2 | RNVC: 1

30 Dec 2003

5340-27-018-7034
Loop Clamp

270187034
1010FG-2201586: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-033-6608
Bow Handle

270336608
7700516049: RNCC: 2 | RNVC: 1

9 Nov 2006

5340-27-038-5119
Mounting Bracket

270385119
MM-7450-0031: RNCC: 2 | RNVC: 1

10 Oct 2007

5340-27-017-2479
Mending Plate

270172479
5340-TJ-02511: RNCC: 2 | RNVC: 1

2 Jun 2003

5340-27-059-6348
Angle Bracket

270596348
901-DS-128: RNCC: 2 | RNVC: 1

20 Sep 2013

5340-27-019-1182
Access Cover

270191182
7320644: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-022-0628
Mounting Bracket

270220628
1009 1YK 0854: RNCC: 2 | RNVC: 1

30 Jan 2004

5340-27-044-8675
Catch Strike

270448675
46795477: RNCC: 3 | RNVC: 2

18 Mar 2009

5340-27-015-0394
Loop Clamp

270150394
7392328: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-053-8350
Mending Plate

270538350
C 152 000140: RNCC: 2 | RNVC: 2

28 Jun 2011

5340-27-021-0364
Mounting Bracket

270210364
1009.1KI.0229-11/2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-4112
Mounting Bracket

270214112
1009.1KI.0302/1-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-2889
Mounting Bracket

270172889
MP001152: RNCC: 2 | RNVC: 1

9 Jun 2003

5340-27-012-1883
Catch Strike

270121883
95VB V06157 AB: RNCC: 2 | RNVC: 1

17 Jan 2002

5340-27-059-2858
Access Cover

270592858
98019105: RNCC: 2 | RNVC: 1

5 Jul 2013

5340-27-059-4833
Mounting Bracket

270594833
12E00-72437-AA: RNCC: 2 | RNVC: 1

23 Aug 2013

5340-27-023-1130
Mounting Bracket

270231130
2ABM 1MK 0032: RNCC: 2 | RNVC: 1

28 May 2004

5340-27-028-4856
Mounting Bracket

270284856
72A05-73170-AA: RNCC: 2 | RNVC: 1

4 Jan 2006

5340-27-033-6271
Handle Grip

270336271
50000137: RNCC: 5 | RNVC: 9

7 Nov 2006

5340-27-027-4708
Catch Strike

270274708
12A14-55010-AA: RNCC: 2 | RNVC: 1

5 Oct 2005

5340-27-023-3974
Catch Strike

270233974
1010FK-1801897: RNCC: 2 | RNVC: 1

26 Jun 2004

5340-27-058-5611
Mending Plate

270585611
98023635: RNCC: 2 | RNVC: 1

21 Feb 2013

5340-27-058-2251
Mounting Bracket

270582251
201105: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-054-3762
Access Cover

270543762
87 32 212 93R: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-021-4063
Mounting Bracket

270214063
1009.1KI.0161-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-015-7298
Butt Hinge

270157298
16001DM0135: RNCC: 2 | RNVC: 1
GERMAN,SOL,120MM: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-049-8472
Mending Plate

270498472
108295: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-052-7282
Mending Plate

270527282
10046594: RNCC: 2 | RNVC: 1

18 Feb 2011

5340-27-025-4304
Mending Plate

270254304
6015-7632-8001: RNCC: 2 | RNVC: 1

15 Mar 2005

5340-27-026-0097
Rod End Clevis

270260097
377770552001: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-050-0485
Bridge Clamp

270500485
280601926: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-021-1073
Bridge Clamp

270211073
05001ZK0001: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-023-0505
Mounting Bracket

270230505
2ABM 1MK 0006: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-023-0755
Lock Key

270230755
150130490: RNCC: 2 | RNVC: 1

26 May 2004

5340-27-050-3854
Mending Plate

270503854
105228: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-017-0878
Mounting Bracket

270170878
2901731: RNCC: 2 | RNVC: 1
2941731: RNCC: 2 | RNVC: 1

14 May 2003

5340-27-025-2253
Mounting Bracket

270252253
RAY30CM: RNCC: 2 | RNVC: 1

4 Feb 2005

5340-27-034-7849
Mending Plate

270347849
13237326: RNCC: 2 | RNVC: 1

8 Feb 2007

5340-27-006-9490
Mounting Bracket

270069490
P95AG A18D317 AA: RNCC: 2 | RNVC: 1

1 Jul 1999

5340-27-045-1750
Mounting Bracket

270451750
1.HIBM-1I-2821D03: RNCC: 2 | RNVC: 1

13 Apr 2009

5340-27-013-5956
Mending Plate

270135956
88.62820.2101: RNCC: 2 | RNVC: 1

2 Jul 2002

5340-27-059-1521
Loop Clamp

270591521
901-KL-283: RNCC: 2 | RNVC: 1

7 Jun 2013

5340-27-029-2932
Mending Plate

270292932
81.90801.0346: RNCC: 2 | RNVC: 1

20 Mar 2006

5340-27-051-4132
Mending Plate

270514132
108042: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-023-6916
Mounting Bracket

270236916
20335T: RNCC: 2 | RNVC: 1

29 Jul 2004

5340-27-017-3697
Pad Eye

270173697
1009.1IS.0056-1E: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-024-8654
Webbing Strap

270248654
5002484523: RNCC: 2 | RNVC: 1

11 Dec 2004

5340-27-049-9667
Mending Plate

270499667
191000005: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-010-1441
Mounting Bracket

270101441
98010435: RNCC: 2 | RNVC: 1

8 Nov 2001

5340-27-052-6297
Mounting Bracket

270526297
62 56 400 21R: RNCC: 2 | RNVC: 2

10 Feb 2011

5340-27-043-0826
Screw Hook

270430826
8250: RNCC: 2 | RNVC: 1

10 Oct 2008

5340-27-059-3154
Mending Plate

270593154
98023583: RNCC: 2 | RNVC: 1

11 Jul 2013

5340-27-058-7512
Mounting Bracket

270587512
VOE12745971: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-27-019-9408
Angle Bracket

270199408
336780-LD: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-042-6182
Hinged Hasp

270426182
2ABEP00926: RNCC: 2 | RNVC: 1

1 Sep 2008

5340-27-013-2404
Snap Hook

270132404
6007-0532-8003: RNCC: 2 | RNVC: 1
6007-0532-8003: RNCC: 2 | RNVC: 1

20 May 2002

5340-27-020-9503
Mending Plate

270209503
1010FG-0000352: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-023-9637
Access Cover

270239637
8620334: RNCC: 2 | RNVC: 1

27 Aug 2004

5340-27-019-8352
Loop Clamp

270198352
90464-13249-00: RNCC: 2 | RNVC: 1
11361609: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-2150
Mounting Bracket

270212150
1012.1HSCA.03-07: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-032-5643
Bridge Clamp

270325643
40-770-0197: RNCC: 2 | RNVC: 1
40-770-0197: RNCC: 2 | RNVC: 1

9 Aug 2006

5340-27-010-5859
Webbing Strap

270105859
3522-1540-7000: RNCC: 2 | RNVC: 1
3522-1540-7000: RNCC: 2 | RNVC: 1

7 Dec 2001

5340-27-029-2256
Webbing Strap

270292256
SIYAH 30X2.2 MM: RNCC: 2 | RNVC: 1

13 Mar 2006

5340-27-034-9712
Mounting Bracket

270349712
13D00-36543-AA: RNCC: 2 | RNVC: 1

20 Feb 2007

5340-27-043-9402
Mortise Lock

270439402
CAM KAPAKLI DOLAP KILIDI: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-048-8917
Angle Bracket

270488917
10029315: RNCC: 2 | RNVC: 1

16 Mar 2010

5340-27-053-2961
Utility Access Door

270532961
H341147105: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-056-8655
Mending Plate

270568655
203397: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-016-4225
Mending Plate

270164225
7700700300: RNCC: 2 | RNVC: 1

15 Jan 2003

5340-27-056-7066
Mounting Bracket

270567066
ADOP-SHELTER-180-KK7: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-001-7565
Loop Clamp

270017565
TM55-1520-210-3EAB-700-D15: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-032-3650
Loop Clamp

270323650
90: RNCC: 2 | RNVC: 1

28 Jun 2006

5340-27-018-7138
Mounting Bracket

270187138
1010FK-3506157: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-012-5537
Mounting Bracket

270125537
10131YS0902: RNCC: 2 | RNVC: 1

11 Feb 2002

5340-27-042-0833
Bow Handle

270420833
42496: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-016-2256
Loop Clamp

270162256
1010004888: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-013-2288
Catch Strike

270132288
1010003218: RNCC: 2 | RNVC: 1

16 May 2002

5340-27-025-0888
Access Cover

270250888
1010FG-1800001: RNCC: 2 | RNVC: 1

1 Dec 2004

5340-27-049-4856
Mending Plate

270494856
108602: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-017-5442
Doorknob

270175442
TOPUZ: RNCC: 2 | RNVC: 1

14 Jul 2003

5340-27-021-4095
Mounting Bracket

270214095
1009.1KI.0319-6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-3674
Mending Plate

270583674
CV71734: RNCC: 2 | RNVC: 1

17 Jan 2013

5340-27-023-6392
Mechanical Stop

270236392
LCD 105: RNCC: 2 | RNVC: 1

22 Jul 2004

5340-27-051-0962
Mounting Bracket

270510962
16F00-58580-AA: RNCC: 2 | RNVC: 1

1 Oct 2010

5340-27-056-8676
Mending Plate

270568676
202284: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-041-4035
Utility Access Door

270414035
80X200 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-010-2606
Mending Plate

270102606
10131YS0739: RNCC: 2 | RNVC: 1

21 Nov 2001

5340-27-036-0965
Mounting Bracket

270360965
1010FK-2711866: RNCC: 2 | RNVC: 1

27 Apr 2007

5340-27-050-2254
Screw Hook

270502254
00212: RNCC: 2 | RNVC: 1

8 Jul 2010

5340-27-045-5448
Bridge Clamp

270455448
K1C 1095: RNCC: 3 | RNVC: 2

14 May 2009

5340-27-049-4842
Mending Plate

270494842
107560-201: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-040-5160
Mounting Bracket

270405160
10870481: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-023-0567
Mounting Bracket

270230567
KMS 0043: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-048-9110
Angle Bracket

270489110
10029336: RNCC: 2 | RNVC: 1

17 Mar 2010

5340-27-058-7931
Mounting Bracket

270587931
55RS752706: RNCC: 2 | RNVC: 1

3 Apr 2013

5340-27-022-5907
Mounting Bracket

270225907
24037T: RNCC: 2 | RNVC: 1

25 Mar 2004

5340-27-008-1688
Handle Grip

270081688
27717: RNCC: 2 | RNVC: 1

28 Jul 2000

5340-27-050-0707
Mending Plate

270500707
83A19-61334-AA: RNCC: 2 | RNVC: 1

21 Jun 2010

5340-27-044-4078
Synchro Clamp

270444078
81.98181-0216: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-025-9197
Rod End Connector

270259197
5004452956: RNCC: 2 | RNVC: 1

3 May 2005

5340-27-039-5422
Mounting Bracket

270395422
897333269051: RNCC: 2 | RNVC: 1

6 Dec 2007

5340-27-013-1115
Bridge Clamp

270131115
81.97401.0861: RNCC: 2 | RNVC: 1

26 Apr 2002

5340-27-050-3901
Mending Plate

270503901
105282-3: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-046-6023
Flush Catch Claw

270466023
1010006791: RNCC: 2 | RNVC: 1

10 Sep 2009

5340-27-027-0167
Rod End Clevis

270270167
377770537001: RNCC: 2 | RNVC: 1

22 Aug 2005

5340-27-016-8769
Bow Handle

270168769
719082631: RNCC: 2 | RNVC: 1

28 Mar 2003

5340-27-056-3513
Angle Bracket

270563513
3831837: RNCC: 2 | RNVC: 2

16 Mar 2012

5340-27-059-5085
Access Cover

270595085
VOE16013164: RNCC: 3 | RNVC: 2
VOE16013164: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-27-040-4664
Mounting Bracket

270404664
11615410-1: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-050-8994
Locking Stay

270508994
63D-42159-00: RNCC: 2 | RNVC: 2

13 Sep 2010

5340-27-013-2181
Bridge Clamp

270132181
19016025: RNCC: 2 | RNVC: 1
PPRC KELEPCE 25: RNCC: 2 | RNVC: 1
5340-77777-00002: RNCC: 2 | RNVC: 1
EM BKT 25: RNCC: 2 | RNVC: 1
PPRC KELEPCE 25: RNCC: 2 | RNVC: 1
19016025: RNCC: 5 | RNVC: 2

19 Sep 2003

5340-27-024-3367
Flush Lock

270243367
6015-0732-8019: RNCC: 2 | RNVC: 1

13 Oct 2004

5340-27-032-4361
Mounting Bracket

270324361
83A11-60078-AB: RNCC: 2 | RNVC: 1

12 Jul 2006

5340-27-050-3898
Mending Plate

270503898
109031: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-044-1238
Mounting Bracket

270441238
12E00-57175-AA: RNCC: 2 | RNVC: 1

9 Jan 2009

5340-27-054-6892
Mending Plate

270546892
98021380: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-057-6178
Mounting Bracket

270576178
1693: RNCC: 2 | RNVC: 1

13 Sep 2012

5340-27-053-6039
Mounting Bracket

270536039
387020762001: RNCC: 3 | RNVC: 2

26 May 2011

5340-27-050-0687
Mending Plate

270500687
103554: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-036-4813
Bridge Clamp

270364813
83DB5270AA: RNCC: 2 | RNVC: 1

8 Jun 2007

5340-27-015-0441
Loop Clamp

270150441
7997716: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-050-0579
Mending Plate

270500579
102843: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-028-6988
Mending Plate

270286988
MB021143: RNCC: 2 | RNVC: 1

31 Jan 2006

5340-27-043-6521
Mending Plate

270436521
YS 01 08 09 07: RNCC: 3 | RNVC: 2

28 Nov 2008

5340-27-021-1888
Mounting Bracket

270211888
1012.1HSCA.06-08: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-001-7898
Loop Clamp

270017898
E-AB-205-153-4 MS21919WDG-5: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-036-1351
Catch Strike

270361351
46800964: RNCC: 2 | RNVC: 1

2 May 2007

5340-27-026-0132
Mounting Bracket

270260132
1615935400: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-020-7555
Mending Plate

270207555
1009.1KI.0236-1*5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-046-5247
Handle Grip

270465247
332A22-3013-2401: RNCC: 2 | RNVC: 1

31 Aug 2009

5340-27-051-4091
Mending Plate

270514091
104777: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-050-0712
Mending Plate

270500712
105948: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-048-9631
Mending Plate

270489631
103661: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-044-5344
Mending Plate

270445344
YC15V22486AC: RNCC: 2 | RNVC: 1

13 Feb 2009

5340-27-028-8081
Mending Plate

270288081
7769249: RNCC: 2 | RNVC: 1

8 Feb 2006

5340-27-005-1494
Loop Clamp

270051494
1010000683: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-058-9909
Padlock

270589909
CH18968: RNCC: 3 | RNVC: 2
CH18968: RNCC: 3 | RNVC: 2

13 May 2013

5340-27-041-8860
Mounting Bracket

270418860
05401: RNCC: 2 | RNVC: 1
05401: RNCC: 2 | RNVC: 1

27 Jun 2008

5340-27-022-3868
Mending Plate

270223868
24655MV9670: RNCC: 2 | RNVC: 1
24655MV9670: RNCC: 5 | RNVC: 9

4 Mar 2004

5340-27-037-6269
Mounting Bracket

270376269
MVS 20 NF 230 KA: RNCC: 2 | RNVC: 1

13 Aug 2007

5340-27-004-5133
Access Cover

270045133
10121YK5363: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-036-1452
Bail Handle

270361452
KULP TAKIMI: RNCC: 2 | RNVC: 1

3 May 2007

5340-27-058-4062
Expansion Plug

270584062
CV72265: RNCC: 2 | RNVC: 1

23 Jan 2013

5340-27-007-3950
Retaining Clip

270073950
96AG 14197 DA: RNCC: 2 | RNVC: 1

2 Nov 1999

5340-27-050-8587
Rod End Connector

270508587
6H4-41241-01: RNCC: 3 | RNVC: 2
6H4-41241-01: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-010-0152
Cover Strip

270100152
DZJA000235: RNCC: 2 | RNVC: 1

22 Oct 2001

5340-27-005-6260
Catch Strike

270056260
92VB-V21982-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-033-6431
Mechanical Stop

270336431
40-205-2370: RNCC: 2 | RNVC: 1
40-205-2370: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-057-9835
Mounting Bracket

270579835
1010FMA-0312927: RNCC: 2 | RNVC: 1

26 Nov 2012

5340-27-054-6033
Mounting Bracket

270546033
55RS752948: RNCC: 3 | RNVC: 2

30 Sep 2011

5340-27-055-2166
Mounting Bracket

270552166
1692-0023: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-010-1883
Mounting Bracket

270101883
SM 1883: RNCC: 2 | RNVC: 1
AYPAR 60339129: RNCC: 2 | RNVC: 1
60339129: RNCC: 2 | RNVC: 1
60339129: RNCC: 2 | RNVC: 1

5 Sep 2002

5340-27-020-6923
Butt Hinge Leaf

270206923
5340MESE9880010: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-3868
Mending Plate

270503868
105327: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-058-9013
Access Cover

270589013
VOE12741495: RNCC: 3 | RNVC: 2

26 Apr 2013

5340-27-052-5543
Bow Handle

270525543
73 94 000 11R: RNCC: 2 | RNVC: 2

7 Feb 2011

5340-27-028-7754
Mounting Bracket

270287754
884-5800-978: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-057-3199
Lock Key

270573199
SE012019-10: RNCC: 2 | RNVC: 1

18 Jul 2012

5340-27-028-4323
Bail Handle

270284323
KEDM -122: RNCC: 2 | RNVC: 1

30 Dec 2005

5340-27-013-9665
Mounting Bracket

270139665
6040-0522-8015: RNCC: 2 | RNVC: 1
6040-0522-8015: RNCC: 2 | RNVC: 1

19 Aug 2002

5340-27-026-9221
Mounting Bracket

270269221
1010FK-0000235-1: RNCC: 2 | RNVC: 1

9 Aug 2005

5340-27-038-1054
Mounting Bracket

270381054
044-02-103: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-056-8158
Mending Plate

270568158
203617: RNCC: 2 | RNVC: 1

15 May 2012

5340-27-017-3873
Mounting Bracket

270173873
1009.1IS.0058-21: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-053-1060
Mending Plate

270531060
103727: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-27-052-6339
Mending Plate

270526339
90 45 900 31R: RNCC: 2 | RNVC: 2

10 Feb 2011

5340-27-055-9781
Mending Plate

270559781
5340-TJ-03388: RNCC: 2 | RNVC: 1

19 Jan 2012

5340-27-023-4542
Mounting Bracket

270234542
1010FK-2710761: RNCC: 2 | RNVC: 1

1 Jul 2004

5340-27-060-0569
Mounting Bracket

270600569
MM-7490-0351: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-016-4073
Catch Strike

270164073
020/20069: RNCC: 2 | RNVC: 1
805-4004-017: RNCC: 2 | RNVC: 1

14 Jan 2003

5340-27-060-0558
Mounting Bracket

270600558
MN-7490-0052: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-018-8958
Mortise Lock

270188958
11051YK0083: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-022-7710
Angle Bracket

270227710
K16746: RNCC: 2 | RNVC: 1
10121YB5692: RNCC: 2 | RNVC: 1

17 Apr 2004

5340-27-050-0686
Mending Plate

270500686
103551: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-022-2465
Bail Handle

270222465
39008: RNCC: 2 | RNVC: 1

20 Feb 2004

5340-27-008-0310
Handle Grip

270080310
25658: RNCC: 2 | RNVC: 1

7 Jun 2000

5340-27-022-0433
Mounting Bracket

270220433
1009 1IS 0068A-24: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-038-2175
Access Cover

270382175
3583640: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-008-8540
Mounting Bracket

270088540
98001162: RNCC: 2 | RNVC: 1

2 Feb 2001

5340-27-059-5014
Access Cover

270595014
VOE12748514: RNCC: 3 | RNVC: 2
VOE12748514: RNCC: 3 | RNVC: 2

23 Aug 2013

5340-27-021-3003
Flush Catch

270213003
3011R30400003: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-026-0252
Rim Latch

270260252
23471: RNCC: 2 | RNVC: 1

20 May 2005

5340-27-052-3862
Mending Plate

270523862
71B21-73614-AA: RNCC: 2 | RNVC: 1

17 Jan 2011

5340-27-023-1190
Mounting Bracket

270231190
2ABM 1MK 0036: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-053-3489
Mending Plate

270533489
020/10249: RNCC: 2 | RNVC: 1
020/10249: RNCC: 2 | RNVC: 1

20 Apr 2011

5340-27-050-0206
Utility Access Door

270500206
110X22X205CM, KASALI: RNCC: 2 | RNVC: 1

18 Jun 2010

5340-27-013-4513
Lever Bracket

270134513
53RS200180: RNCC: 2 | RNVC: 1

19 Jun 2002

5340-27-015-6411
Butt Hinge

270156411
05001HM0056: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-048-5223
Bridge Clamp

270485223
HD165138Y: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-27-054-5976
Mounting Bracket

270545976
55RS752937: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-051-2773
Mounting Bracket

270512773
16L00-36928-AA: RNCC: 2 | RNVC: 1

13 Oct 2010

5340-27-056-5032
Mending Plate

270565032
203493: RNCC: 2 | RNVC: 2

4 Apr 2012

5340-27-044-8567
Bow Handle

270448567
98846505: RNCC: 3 | RNVC: 2

17 Mar 2009

5340-27-042-5784
Access Cover

270425784
3975796: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-038-4561
Mounting Bracket

270384561
387002666001: RNCC: 2 | RNVC: 1

9 Oct 2007

5340-27-055-3201
Mending Plate

270553201
201684: RNCC: 2 | RNVC: 2

29 Nov 2011

5340-27-053-7296
Access Cover

270537296
10046816: RNCC: 2 | RNVC: 2

13 Jun 2011

5340-27-017-3863
Mounting Bracket

270173863
1009.1IS.0044-10A: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-055-0299
Mounting Bracket

270550299
6111.5200-2: RNCC: 2 | RNVC: 1

31 Oct 2011

5340-27-024-5965
Rod End Clevis

270245965
05001FC0034: RNCC: 2 | RNVC: 1

13 Nov 2004

5340-27-025-7856
Lock Key

270257856
NAS559-6: RNCC: 2 | RNVC: 1

12 Apr 2005

5340-27-058-4418
Angle Bracket

270584418
M535E661220000: RNCC: 2 | RNVC: 1

31 Jan 2013

5340-27-018-8956
Snap Hook

270188956
11051YK0075: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-009-9432
Access Cover

270099432
98012577: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-019-2207
Loop Clamp

270192207
11001DK0257: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-009-4032
Hinged Hasp

270094032
10131YV0158: RNCC: 2 | RNVC: 1

28 Jun 2001

5340-27-019-9289
Angle Bracket

270199289
MTC4771-L: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-041-3617
Utility Access Door

270413617
76X200 AL: RNCC: 2 | RNVC: 1

15 May 2008

5340-27-050-0240
Utility Access Door

270500240
82X4.5X200CM, KASASIZ ODA: RNCC: 2 | RNVC: 1

18 Jun 2010

5340-27-038-7431
Mounting Bracket

270387431
10861498: RNCC: 2 | RNVC: 1

30 Oct 2007

5340-27-017-3623
Mending Plate

270173623
1009.1IS.0047-7: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-055-6894
Mounting Bracket

270556894
55RS251711: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-021-8477
Catch Strike

270218477
5117T: RNCC: 2 | RNVC: 1

5 Jan 2004

5340-27-059-3150
Mending Plate

270593150
98023550: RNCC: 2 | RNVC: 1

11 Jul 2013

Load More Results