What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 14 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 14 of 53

5340-27-046-0199
Caster Wheel

270460199
EN01AKZ70: RNCC: 2 | RNVC: 1

29 Jun 2009

5340-27-022-0603
Mounting Bracket

270220603
9120 58: RNCC: 2 | RNVC: 1

29 Jan 2004

5340-27-015-0352
Loop Clamp

270150352
7057335: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-024-5060
Clamping Catch

270245060
1010005192: RNCC: 2 | RNVC: 1

5 Nov 2004

5340-27-024-5433
Mounting Bracket

270245433
1009 1YS 0024: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-003-9876
Access Cover

270039876
10121YK5004: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-032-7121
Mounting Bracket

270327121
13C01-36928-AB: RNCC: 2 | RNVC: 1

12 Sep 2006

5340-27-015-0262
Loop Clamp

270150262
1010FG-0306159-2: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-039-2786
Loop Holder

270392786
3587700: RNCC: 2 | RNVC: 1

22 Nov 2007

5340-27-049-4762
Mounting Bracket

270494762
107286: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-020-7539
Mending Plate

270207539
1009.1KI.0319-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-7125
Angle Bracket

270177125
H-39-4938-50: RNCC: 2 | RNVC: 1

21 Aug 2003

5340-27-020-6362
Mounting Bracket

270206362
1009.1KI.0121-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3746
Flush Catch

270173746
1009.1IS.0068-B/24: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-036-2380
Sliding Door Track

270362380
3C46E51269DB: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-021-4560
Mortise Lock Set

270214560
07002YK0299: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-0284
Mending Plate

270540284
98019132: RNCC: 2 | RNVC: 2

18 Jul 2011

5340-27-011-0538
Access Cover

270110538
7115310417: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-035-8610
Bow Handle

270358610
85005139: RNCC: 2 | RNVC: 1

4 Apr 2007

5340-27-020-1544
Catch Strike

270201544
7700834331: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-057-7137
Crank Handle

270577137
73 3679 1856: RNCC: 2 | RNVC: 1

2 Oct 2012

5340-27-059-0378
Loop Clamp

270590378
VOE4881438: RNCC: 3 | RNVC: 2
VOE4881438: RNCC: 3 | RNVC: 2

20 May 2013

5340-27-040-8017
Mending Plate

270408017
ME606342: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-014-1897
Bow Handle

270141897
81.65815.0057: RNCC: 2 | RNVC: 1

23 Sep 2002

5340-27-054-7867
Mending Plate

270547867
201592: RNCC: 2 | RNVC: 2

14 Oct 2011

5340-27-054-6657
Mounting Bracket

270546657
55RS752964: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-024-1803
Access Cover

270241803
06588: RNCC: 2 | RNVC: 1
6167199: RNCC: 2 | RNVC: 1

25 Sep 2004

5340-27-059-2635
Mending Plate

270592635
98023255: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-005-1570
Loop Clamp

270051570
1010002077: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-008-3153
Rod Retainer Clip

270083153
14203080: RNCC: 2 | RNVC: 1

14 Sep 2000

5340-27-044-8014
Mounting Bracket

270448014
1C1T14536AA: RNCC: 2 | RNVC: 1

13 Mar 2009

5340-27-042-0784
Catch Strike

270420784
47340: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-008-0104
Mounting Bracket

270080104
6040-0527-4002: RNCC: 2 | RNVC: 1
6040-0527-4002: RNCC: 2 | RNVC: 1

31 May 2000

5340-27-020-7819
Mending Plate

270207819
1009.1KI.0340-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-0461
Mounting Bracket

270210461
1009.1KI.0308-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-5696
Caster Wheel

270545696
TASIMA-100X35: RNCC: 2 | RNVC: 1
100X35: RNCC: 5 | RNVC: 9

26 Sep 2011

5340-27-034-7261
Elastic Strap

270347261
AMB-092: RNCC: 2 | RNVC: 1

5 Feb 2007

5340-27-020-8458
Bail Handle

270208458
ZLB-32-267: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-027-8145
Angle Bracket

270278145
1501502059: RNCC: 2 | RNVC: 1

8 Nov 2005

5340-27-014-3071
Lever Bracket

270143071
2K204387: RNCC: 2 | RNVC: 1

4 Oct 2002

5340-27-020-2037
Mounting Bracket

270202037
7700666065: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-042-9960
Mounting Bracket

270429960
40.624.0168: RNCC: 2 | RNVC: 1
40.624.0168: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-003-9204
Clamping Catch

270039204
07001MN0300: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-057-2364
Access Cover

270572364
M576D210220000: RNCC: 2 | RNVC: 1

9 Jul 2012

5340-27-028-3467
Butt Hinge

270283467
58.5X100 MM, KROM: RNCC: 2 | RNVC: 1

25 Dec 2005

5340-27-022-1521
Mounting Bracket

270221521
1009 1YM 0080-10: RNCC: 2 | RNVC: 1

13 Feb 2004

5340-27-027-9071
Mounting Bracket

270279071
1010FK-3506307: RNCC: 2 | RNVC: 1
1010FK-3506307: RNCC: 5 | RNVC: 9

17 Nov 2005

5340-27-054-1746
Mending Plate

270541746
98021868: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-018-7148
Mounting Bracket

270187148
1010FG-2205257: RNCC: 2 | RNVC: 1
1010FG-2205257: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-049-4742
Mending Plate

270494742
104565: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-048-9642
Mending Plate

270489642
103674: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-028-7824
Mortise Lock

270287824
BAREL 254-68: RNCC: 5 | RNVC: 9

6 Feb 2006

5340-27-048-5867
Mending Plate

270485867
MC258503-03Y: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-046-9759
Mounting Bracket

270469759
898006970051: RNCC: 2 | RNVC: 1

24 Oct 2009

5340-27-043-6892
Utility Access Door

270436892
AL-2495X2045 MM: RNCC: 2 | RNVC: 1

2 Dec 2008

5340-27-037-6931
Mounting Bracket

270376931
83A18-36970-AA: RNCC: 2 | RNVC: 1

21 Aug 2007

5340-27-050-8696
Mounting Bracket

270508696
6J8-43311-10-4D: RNCC: 3 | RNVC: 2
6J8-43311-10-4D: RNCC: 3 | RNVC: 2

6 Sep 2010

5340-27-017-3882
Mounting Bracket

270173882
1009.1IS.0067-20: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-024-9110
Loop Clamp

270249110
4008601: RNCC: 2 | RNVC: 1

16 Dec 2004

5340-27-053-3625
Mounting Bracket

270533625
H341158001: RNCC: 2 | RNVC: 1

22 Apr 2011

5340-27-021-8039
Access Cover

270218039
1009 1YT 1252: RNCC: 2 | RNVC: 1

30 Dec 2003

5340-27-007-2027
Elastic Strap

270072027
E 863272 S: RNCC: 2 | RNVC: 1

23 Sep 1999

5340-27-047-1029
Key Holder

270471029
ANAHTARLIK,JANDARMA LOGOLU: RNCC: 2 | RNVC: 1

4 Nov 2009

5340-27-056-9252
Mending Plate

270569252
F01-01-012: RNCC: 2 | RNVC: 1

31 May 2012

5340-27-042-8616
Mounting Bracket

270428616
72B00-36080-AA: RNCC: 2 | RNVC: 1

16 Sep 2008

5340-27-056-2961
Mounting Bracket

270562961
MN-0000-0237: RNCC: 3 | RNVC: 2

12 Mar 2012

5340-27-022-6206
Mounting Bracket

270226206
24279T: RNCC: 2 | RNVC: 1

31 Mar 2004

5340-27-020-2071
Access Cover

270202071
10121YK5656: RNCC: 2 | RNVC: 1

17 Nov 2003

5340-27-046-3109
Mounting Bracket

270463109
71C00-76851-AA: RNCC: 2 | RNVC: 1

28 Jul 2009

5340-27-040-7277
Loop Clamp

270407277
255-01-55: RNCC: 2 | RNVC: 1

10 Mar 2008

5340-27-020-9487
Mending Plate

270209487
1010FG-0000760: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-8721
Lock Key

270078721
2B84055: RNCC: 2 | RNVC: 1

6 Apr 2000

5340-27-041-4480
Mounting Bracket

270414480
M577E112220000: RNCC: 1 | RNVC: 2

26 May 2008

5340-27-023-1944
Mechanical Stop

270231944
1010FK-1911345: RNCC: 2 | RNVC: 1

4 Jun 2004

5340-27-040-7809
Bow Handle

270407809
MK405366: RNCC: 2 | RNVC: 1

18 Mar 2008

5340-27-056-7059
Mounting Bracket

270567059
ADOP-SHELTER-180-HAK: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-053-5142
Loop Clamp

270535142
N07/8308591: RNCC: 2 | RNVC: 1

12 May 2011

5340-27-021-8293
Detent Plunger

270218293
27907: RNCC: 2 | RNVC: 1

5 Jan 2004

5340-27-028-7778
Mounting Bracket

270287778
884-5800-993: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-035-6240
Angle Bracket

270356240
81.15501.5414: RNCC: 2 | RNVC: 1

22 Mar 2007

5340-27-018-1999
Mounting Bracket

270181999
897209356001: RNCC: 2 | RNVC: 1

7 Nov 2003

5340-27-059-4600
Loop Clamp

270594600
VOE952625: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-27-042-7208
Bow Handle

270427208
DOLAP KULPU,96MM: RNCC: 2 | RNVC: 1
DOLAP KULPU,96MM: RNCC: 2 | RNVC: 1
DOLAP KULPU,96MM: RNCC: 2 | RNVC: 1
DOLAP KULPU,96MM: RNCC: 2 | RNVC: 1
DOLAP KULPU,96MM: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-017-3757
Bail Handle

270173757
1009.1IS.0061-4D: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-005-1487
Loop Clamp

270051487
1010000543: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-004-3264
Clip Retainer Plate

270043264
05001YT0156: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-021-3933
Mounting Bracket

270213933
05001DD0010: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-4930
Mending Plate

270494930
107523: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-023-3151
Access Cover

270233151
7707605: RNCC: 2 | RNVC: 1

18 Jun 2004

5340-27-059-5094
Loop Clamp

270595094
VOE15414740: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-27-054-1754
Mending Plate

270541754
98019678: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-052-2496
Catch Strike

270522496
13F10-37050-AA: RNCC: 3 | RNVC: 2

29 Dec 2010

5340-27-014-1560
Rod End Connector

270141560
16HY1-305300.01: RNCC: 2 | RNVC: 1

17 Sep 2002

5340-27-060-0227
Crank Handle

270600227
M521D337020100: RNCC: 2 | RNVC: 1

26 Dec 2013

5340-27-048-5912
Catch Strike

270485912
SB152163Y: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-020-9496
Mending Plate

270209496
1010FG-0000715: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-027-8730
Butt Hinge

270278730
TAS MENTESE(0000-GK-003-4319): RNCC: 2 | RNVC: 1

15 Nov 2005

5340-27-026-2080
Mounting Bracket

270262080
10.6427.10: RNCC: 2 | RNVC: 1

17 Jun 2005

5340-27-040-2552
Mending Plate

270402552
8200268140: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-020-9395
Mounting Bracket

270209395
1009.1KI.0169: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-4887
Mounting Bracket

270514887
400253-006: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-27-051-7655
Mending Plate

270517655
16F00-15048-AA: RNCC: 2 | RNVC: 1

25 Nov 2010

5340-27-038-5836
Mounting Bracket

270385836
387000923201: RNCC: 2 | RNVC: 1

19 Oct 2007

5340-27-021-8401
Mounting Bracket

270218401
1009 1AD 0028: RNCC: 2 | RNVC: 1

5 Jan 2004

5340-27-048-6950
Bow Handle

270486950
09013DA4932: RNCC: 2 | RNVC: 1

22 Feb 2010

5340-27-009-6113
Mounting Bracket

270096113
85009757: RNCC: 2 | RNVC: 1

3 Aug 2001

5340-27-023-3150
Angle Bracket

270233150
98013720: RNCC: 2 | RNVC: 1

18 Jun 2004

5340-27-024-8966
Mounting Bracket

270248966
1010FG-0000764: RNCC: 2 | RNVC: 1

15 Dec 2004

5340-27-048-9652
Mending Plate

270489652
103693: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-019-2631
Mounting Bracket

270192631
10131YB0117: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-7499
Butt Hinge

270187499
09013DM0111: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-5872
Bridge Clamp

270485872
MC329487Y: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-022-0819
Handle Grip

270220819
39012: RNCC: 2 | RNVC: 1

6 Feb 2004

5340-27-049-0399
Mounting Bracket

270490399
302829: RNCC: 2 | RNVC: 1

29 Mar 2010

5340-27-005-1752
Loop Clamp

270051752
1010002413: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-055-4563
Mounting Bracket

270554563
5425303: RNCC: 2 | RNVC: 2

6 Dec 2011

5340-27-021-3089
Mending Plate

270213089
1012.1HSCA.02-03: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-2723
Mending Plate

270582723
MM-7490-0054: RNCC: 2 | RNVC: 1

2 Jan 2013

5340-27-009-1274
Loop Clamp

270091274
88974200002: RNCC: 2 | RNVC: 1
2106006506: RNCC: 2 | RNVC: 1
BG-01-02-35: RNCC: 2 | RNVC: 1
90465-08034-00: RNCC: 2 | RNVC: 1

7 May 2001

5340-27-028-7578
Mounting Bracket

270287578
884-5810-926: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-047-7276
Mounting Bracket

270477276
13C45-58450-AC: RNCC: 2 | RNVC: 1

15 Dec 2009

5340-27-040-1931
Mending Plate

270401931
55198250: RNCC: 2 | RNVC: 1

14 Jan 2008

5340-27-021-9828
Mending Plate

270219828
1009 1AD 0025-1: RNCC: 2 | RNVC: 1

20 Jan 2004

5340-27-048-7546
Loop Clamp

270487546
CN100908L: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-27-059-6347
Angle Bracket

270596347
901-DS-132: RNCC: 2 | RNVC: 1

20 Sep 2013

5340-27-038-8631
Mending Plate

270388631
31757-40K00: RNCC: 5 | RNVC: 9

2 Nov 2007

5340-27-048-7093
Bow Handle

270487093
901-KT-223: RNCC: 2 | RNVC: 1

23 Feb 2010

5340-27-020-7577
Mending Plate

270207577
1009.1KI.0205/1*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-8489
Mending Plate

270498489
108605: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-054-7168
Mending Plate

270547168
98022444: RNCC: 2 | RNVC: 2

10 Oct 2011

5340-27-059-3025
Access Cover

270593025
168410900001: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-027-5507
Bow Handle

270275507
81.97001.0526: RNCC: 2 | RNVC: 1

11 Oct 2005

5340-27-017-3665
Mending Plate

270173665
1009.1IS.0099: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-009-6467
Mounting Bracket

270096467
6443 67: RNCC: 2 | RNVC: 1

9 Aug 2001

5340-27-059-7598
Mending Plate

270597598
1010FMA-0000483-1: RNCC: 2 | RNVC: 1

28 Oct 2013

5340-27-025-8075
Filler Opening Cap

270258075
5003537421: RNCC: 2 | RNVC: 1

13 Apr 2005

5340-27-059-4375
Swivel Caster

270594375
09013TK0022: RNCC: 2 | RNVC: 1

5 Aug 2013

5340-27-012-1851
Angle Bracket

270121851
10131YS0896: RNCC: 2 | RNVC: 1

17 Jan 2002

5340-27-015-0361
Loop Clamp

270150361
7091999: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-028-4671
Mending Plate

270284671
72A25-35403-AA: RNCC: 2 | RNVC: 1

3 Jan 2006

5340-27-022-0435
Butt Hinge

270220435
9BM 5340-00022: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-025-4610
Mounting Bracket

270254610
H24C2-32041: RNCC: 2 | RNVC: 1

18 Mar 2005

5340-27-033-6342
Angle Bracket

270336342
901-AS-358: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-058-3844
Access Cover

270583844
37507-27100: RNCC: 5 | RNVC: 9

21 Jan 2013

5340-27-001-2911
Loop Clamp

270012911
205-030-713-031: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-058-2732
Mending Plate

270582732
MM-7490-0079: RNCC: 2 | RNVC: 1

2 Jan 2013

5340-27-058-8263
Blank Panel

270588263
VOE12742511: RNCC: 3 | RNVC: 2

10 Apr 2013

5340-27-007-1710
Elastic Strap

270071710
E 863029 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-017-3861
Mounting Bracket

270173861
1009.1IS.0044-2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-047-1540
Access Cover

270471540
73801-61180-AB: RNCC: 1 | RNVC: 2

9 Nov 2009

5340-27-023-0911
Mounting Bracket

270230911
24123-1100: RNCC: 2 | RNVC: 1

27 May 2004

5340-27-032-5015
Access Cover

270325015
T570-G3000-100: RNCC: 2 | RNVC: 1

26 Jul 2006

5340-27-058-9609
Access Cover

270589609
VOE12740448: RNCC: 3 | RNVC: 2

8 May 2013

5340-27-048-5864
Bow Handle

270485864
MC241382Y: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-036-0135
Angle Bracket

270360135
10025930: RNCC: 2 | RNVC: 1

18 Apr 2007

5340-27-058-0167
Mending Plate

270580167
38403-341-672: RNCC: 2 | RNVC: 1

30 Nov 2012

5340-27-055-0734
Mending Plate

270550734
200584: RNCC: 2 | RNVC: 2

2 Nov 2011

5340-27-043-9588
Bow Handle

270439588
6387270480: RNCC: 2 | RNVC: 1

24 Dec 2008

5340-27-009-9338
Bridge Clamp

270099338
98012344: RNCC: 2 | RNVC: 1

11 Oct 2001

5340-27-034-6103
Mounting Bracket

270346103
545A09: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-012-2406
Expansion Plug

270122406
10131YT0584: RNCC: 2 | RNVC: 1

21 Jan 2002

5340-27-021-9822
Mending Plate

270219822
1009 1AD 0027/1: RNCC: 2 | RNVC: 1

20 Jan 2004

5340-27-020-7842
Mending Plate

270207842
1009.1KI.0220-7: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-2595
Utility Access Door

270552595
UG 063000 POZ-2: RNCC: 2 | RNVC: 1
UG 063000 POZ-2: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-028-8566
Mounting Bracket

270288566
1010005488: RNCC: 2 | RNVC: 1

13 Feb 2006

5340-27-022-1330
Mending Plate

270221330
45521HA2006: RNCC: 2 | RNVC: 1
45521HA2006: RNCC: 5 | RNVC: 9

12 Feb 2004

5340-27-021-2152
Mounting Bracket

270212152
1012.1HSCA.03-62: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-0963
Mounting Bracket

270510963
16F00-58594-AA: RNCC: 2 | RNVC: 1

1 Oct 2010

5340-27-044-8948
Coat And Hat Hook

270448948
735456819: RNCC: 3 | RNVC: 2

19 Mar 2009

5340-27-019-5536
Mounting Bracket

270195536
07002YH0079: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-3612
Mounting Bracket

270183612
10121YP5571: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-036-4196
Mending Plate

270364196
2C469C422AA: RNCC: 2 | RNVC: 1

4 Jun 2007

5340-27-052-7504
Mending Plate

270527504
99 2A 100 18R: RNCC: 2 | RNVC: 2

21 Feb 2011

5340-27-014-9271
Caster Wheel

270149271
2630-31968-00011: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-058-2119
Mending Plate

270582119
11871-ZY3-000: RNCC: 2 | RNVC: 1

21 Dec 2012

5340-27-028-7814
Mounting Bracket

270287814
884-5810-966: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-001-7891
Loop Clamp

270017891
TM55-1520-210-2AN735-D27: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-002-9857
Loop Clamp

270029857
205-031-153-001: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-056-8060
Mending Plate

270568060
202380: RNCC: 2 | RNVC: 1

14 May 2012

5340-27-042-0785
Mounting Bracket

270420785
897378945051: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-050-3861
Mending Plate

270503861
105255: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-053-8479
Mounting Bracket

270538479
H343603800: RNCC: 2 | RNVC: 1

28 Jun 2011

5340-27-057-4004
Mending Plate

270574004
021500131200: RNCC: 2 | RNVC: 1

31 Jul 2012

5340-27-008-9034
Mounting Bracket

270089034
98001228: RNCC: 2 | RNVC: 1

14 Feb 2001

5340-27-008-9026
Mounting Bracket

270089026
98001256: RNCC: 2 | RNVC: 1

14 Feb 2001

5340-27-054-1749
Mending Plate

270541749
98019044: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-036-8301
Bail Handle

270368301
40.205.3841: RNCC: 2 | RNVC: 1
40.205.3841: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-029-3533
Mounting Bracket

270293533
7376611413: RNCC: 2 | RNVC: 1

22 Mar 2006

5340-27-023-5128
Angle Bracket

270235128
1010FK-2703825: RNCC: 2 | RNVC: 1

8 Jul 2004

5340-27-056-3649
Loop Clamp

270563649
3834903: RNCC: 3 | RNVC: 2

19 Mar 2012

5340-27-041-4219
Mending Plate

270414219
73A15-61240-AA: RNCC: 2 | RNVC: 1

22 May 2008

5340-27-039-7553
Mounting Bracket

270397553
5340-TJ-03251: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-027-2591
Angle Bracket

270272591
15-01-491-002: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-037-0321
Mounting Bracket

270370321
C56B77: RNCC: 2 | RNVC: 1

11 Jul 2007

5340-27-048-9628
Mending Plate

270489628
103657: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-048-7740
Butt Hinge

270487740
MP002545: RNCC: 2 | RNVC: 1

26 Feb 2010

5340-27-004-5126
Access Cover

270045126
10121YK5333: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-055-6969
Mounting Bracket

270556969
577994: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-005-1620
Synchro Clamp

270051620
1010002061: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-021-2128
Mounting Bracket

270212128
1012.1HSCA.03-29: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-3101
Mending Plate

270213101
1012.1HSCA.02-51: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-035-6173
Mounting Bracket

270356173
83.97487.0509: RNCC: 2 | RNVC: 1

22 Mar 2007

5340-27-025-4038
Loop Clamp

270254038
EAB700-2: RNCC: 2 | RNVC: 1

11 Mar 2005

5340-27-050-0682
Mending Plate

270500682
83A19-61332-AA: RNCC: 2 | RNVC: 1

21 Jun 2010

5340-27-028-6141
Mounting Bracket

270286141
MM-7450-0096-KNM14: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-025-3777
Mounting Bracket

270253777
05001DK0218: RNCC: 2 | RNVC: 1

8 Mar 2005

5340-27-022-9263
Crank Handle

270229263
331049: RNCC: 2 | RNVC: 1

5 May 2004

5340-27-036-0134
Angle Bracket

270360134
10025931: RNCC: 2 | RNVC: 1

18 Apr 2007

5340-27-059-7359
Mounting Bracket

270597359
1010FMA-1805029: RNCC: 2 | RNVC: 1

11 Oct 2013

5340-27-038-2225
Mounting Bracket

270382225
3584459: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-024-7200
Mounting Bracket

270247200
1010FG-1801276: RNCC: 2 | RNVC: 1

27 Nov 2004

5340-27-018-7156
Mounting Bracket

270187156
1010FK-1911299: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-012-6329
Access Cover

270126329
98010148: RNCC: 2 | RNVC: 1

19 Feb 2002

5340-27-007-1517
Strap End Clip

270071517
A 435 790 74 96: RNCC: 2 | RNVC: 1

8 Sep 1999

5340-27-008-7116
Control Rod

270087116
DR-00003-0201: RNCC: 2 | RNVC: 1

20 Dec 2000

5340-27-058-6943
Mounting Bracket

270586943
MM-7412-0289: RNCC: 2 | RNVC: 1

15 Mar 2013

5340-27-025-0094
Butt Hinge

270250094
73-3579-1882: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-054-3902
Access Cover

270543902
55RS350943: RNCC: 2 | RNVC: 1

5 Sep 2011

5340-27-049-4859
Mending Plate

270494859
104513: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-041-3693
Utility Access Door

270413693
76X202 CM AL: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-035-0395
Mounting Bracket

270350395
901-TT-283: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-013-0776
Butt Hinge

270130776
M5.01.09.00: RNCC: 2 | RNVC: 1
GPRMNTS-01: RNCC: 5 | RNVC: 2

18 Apr 2002

5340-27-042-0739
Mending Plate

270420739
901-BS-145: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-021-4108
Mounting Bracket

270214108
1009.1KI.0302/1-5: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-9729
Corner Brace

270219729
1009 1AD 0010/1-3: RNCC: 2 | RNVC: 1

16 Jan 2004

5340-27-027-5972
Loop Holder

270275972
2ABM1IMZA0010: RNCC: 2 | RNVC: 1

13 Oct 2005

5340-27-007-0190
Tee Hinge

270070190
91AB A67202 AEW: RNCC: 2 | RNVC: 1

13 Jul 1999

5340-27-026-0139
Mounting Bracket

270260139
1604545680: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-038-2231
Mounting Bracket

270382231
3841089: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-041-3354
Mounting Bracket

270413354
73A15-61244-AA: RNCC: 2 | RNVC: 1
GU1S30005A-CGLT: RNCC: 2 | RNVC: 1

14 May 2008

5340-27-050-9289
Access Cover

270509289
63D-42131-00: RNCC: 2 | RNVC: 2

16 Sep 2010

5340-27-048-5066
Mending Plate

270485066
HD1500S7-10Y: RNCC: 3 | RNVC: 2

12 Feb 2010

5340-27-044-0091
Mounting Bracket

270440091
5340-TJ-03325: RNCC: 2 | RNVC: 1

26 Dec 2008

5340-27-036-7325
Flush Lock

270367325
2.HIBM-9D-476: RNCC: 2 | RNVC: 1

21 Jun 2007

5340-27-006-8261
Blank Panel

270068261
71A00-68200-AA: RNCC: 2 | RNVC: 1

18 May 1999

5340-27-021-0178
Lever Bracket

270210178
1009.1KI.0164-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-3903
Mounting Bracket

270483903
5421465-B: RNCC: 2 | RNVC: 1

5 Feb 2010

5340-27-042-8190
Bridge Clamp

270428190
NTC6776-L: RNCC: 2 | RNVC: 1

12 Sep 2008

5340-27-032-6569
T Bracket

270326569
40-660-7650: RNCC: 2 | RNVC: 1
40-660-7650: RNCC: 2 | RNVC: 1

31 Aug 2006

5340-27-053-0036
Sliding Door Track

270530036
3T16 V25006BA: RNCC: 2 | RNVC: 1

15 Mar 2011

5340-27-014-9169
Synchro Clamp

270149169
13-410-06: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-040-5864
Mending Plate

270405864
83A24-73412-AA: RNCC: 2 | RNVC: 1

1 Feb 2008

5340-27-058-3795
Access Cover

270583795
37507-19100: RNCC: 5 | RNVC: 9

18 Jan 2013

5340-27-020-6168
Handle Grip

270206168
9IML-0281: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-2223
Access Cover

270172223
ME-01-0032-51: RNCC: 2 | RNVC: 1

29 May 2003

5340-27-023-4469
Access Cover

270234469
98013976: RNCC: 2 | RNVC: 1

1 Jul 2004

5340-27-017-3748
Bow Handle

270173748
1009.1IS.0017-7: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-010-2822
Angle Bracket

270102822
10131YS0784: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-021-2368
Butt Hinge

270212368
10131MM0047: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-2696
Expansion Plug

270222696
10121YK5775: RNCC: 2 | RNVC: 1
597586: RNCC: 2 | RNVC: 1

23 Feb 2004

5340-27-043-3684
Mounting Bracket

270433684
PXB8S200LA-X7/C: RNCC: 2 | RNVC: 1

3 Nov 2008

5340-27-035-6205
Bridge Clamp

270356205
81.43410.0269: RNCC: 2 | RNVC: 1

22 Mar 2007

5340-27-034-0923
Bow Handle

270340923
TC323896: RNCC: 2 | RNVC: 1

11 Dec 2006

5340-27-058-3578
Expansion Plug

270583578
CV60314: RNCC: 2 | RNVC: 1

16 Jan 2013

5340-27-057-5718
Padlock

270575718
AA59487-1B: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-046-3171
Mounting Bracket

270463171
71C00-16774-AA: RNCC: 2 | RNVC: 1

29 Jul 2009

5340-27-033-6398
Access Cover

270336398
901-GK-32: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-041-3654
Utility Access Door

270413654
76X190 CM AL: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-052-3973
Handle Grip

270523973
1010FK-2810659: RNCC: 2 | RNVC: 1

18 Jan 2011

5340-27-052-6278
Bow Handle

270526278
897582294201: RNCC: 3 | RNVC: 2

10 Feb 2011

5340-27-050-1559
Mending Plate

270501559
107410: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-027-5278
Mounting Bracket

270275278
387000416001: RNCC: 2 | RNVC: 1

10 Oct 2005

5340-27-033-9153
Mounting Bracket

270339153
0000GK0136205: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-006-9539
Mounting Bracket

270069539
95AT 2467 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-009-6090
Mounting Bracket

270096090
715026614: RNCC: 2 | RNVC: 1

2 Aug 2001

5340-27-048-4750
Angle Bracket

270484750
6040-4040-0016: RNCC: 2 | RNVC: 1

11 Feb 2010

5340-27-048-7491
Mounting Bracket

270487491
6030-4038-0016: RNCC: 2 | RNVC: 1

25 Feb 2010

5340-27-033-5652
Access Cover

270335652
T006-G2100-200: RNCC: 2 | RNVC: 1

26 Oct 2006

5340-27-020-0185
Mounting Bracket

270200185
11051YU0049: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-023-4766
Access Cover

270234766
7407385: RNCC: 2 | RNVC: 1

3 Jul 2004

5340-27-054-4503
Mounting Bracket

270544503
5B33325: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-27-037-5352
Mending Plate

270375352
735290731: RNCC: 2 | RNVC: 1

3 Aug 2007

5340-27-043-8551
Mounting Bracket

270438551
11000-16544-AA: RNCC: 2 | RNVC: 1

18 Dec 2008

5340-27-053-1127
Mending Plate

270531127
104574: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-27-058-7514
Mounting Bracket

270587514
VOE12745972: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-27-026-8975
Mounting Bracket

270268975
TUF-399: RNCC: 2 | RNVC: 1

9 Aug 2005

5340-27-057-3367
Mounting Bracket

270573367
KI046214: RNCC: 2 | RNVC: 1

20 Jul 2012

5340-27-040-2843
Angle Bracket

270402843
Y535-75002-446: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-015-8950
Butt Hinge

270158950
99999-NIIN-DA0019952: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-013-6188
Bridge Clamp

270136188
KE.PVC-Q70: RNCC: 2 | RNVC: 1
PVC 70: RNCC: 2 | RNVC: 1
KELEPCE PVC, 70: RNCC: 2 | RNVC: 1
KELEPCE PVC, 70: RNCC: 2 | RNVC: 1
70 MM BORU: RNCC: 2 | RNVC: 1
5680-INS-5327: RNCC: 5 | RNVC: 2
70 MM: RNCC: 5 | RNVC: 9

3 Jul 2002

5340-27-041-8800
Mounting Bracket

270418800
06105: RNCC: 2 | RNVC: 1
06105: RNCC: 2 | RNVC: 1

27 Jun 2008

5340-27-015-8496
Loop Clamp

270158496
1010004872: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-048-0853
Mounting Bracket

270480853
13C00-76531-AA: RNCC: 2 | RNVC: 1

5 Jan 2010

5340-27-058-8262
Blank Panel

270588262
VOE12742515: RNCC: 3 | RNVC: 2

10 Apr 2013

5340-27-004-6069
Access Cover

270046069
10131YK1013: RNCC: 3 | RNVC: 2

15 May 1996

5340-27-048-7944
Access Cover

270487944
9034-22: RNCC: 2 | RNVC: 1
9034-22: RNCC: 5 | RNVC: 9

2 Mar 2010

5340-27-034-9700
Mounting Bracket

270349700
11000-08045-AA: RNCC: 2 | RNVC: 1

20 Feb 2007

5340-27-051-7009
Handle Grip

270517009
3EB-51-21150: RNCC: 3 | RNVC: 2

22 Nov 2010

5340-27-038-6044
Mounting Bracket

270386044
83A13-61318-AB: RNCC: 2 | RNVC: 1

22 Oct 2007

5340-27-038-1032
Mounting Bracket

270381032
068-55-005: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-043-2939
Mounting Bracket

270432939
74A05-62154-AA: RNCC: 2 | RNVC: 1

24 Oct 2008

5340-27-050-3849
Mending Plate

270503849
104842: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-005-1690
Access Cover

270051690
1010002472: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-050-5123
Bow Handle

270505123
109017: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-055-1637
Magnetic Catch

270551637
5945-ED-287-0059: RNCC: 2 | RNVC: 2

17 Nov 2011

5340-27-013-0865
Chain Bolt

270130865
6005-0932-8005: RNCC: 2 | RNVC: 1
6005-0932-8005: RNCC: 2 | RNVC: 1

19 Apr 2002

5340-27-060-0353
Mounting Bracket

270600353
MM-7490-0118: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-053-8400
Flush Catch

270538400
C171-000020: RNCC: 2 | RNVC: 2

28 Jun 2011

5340-27-044-9325
Mounting Bracket

270449325
6011-04: RNCC: 5 | RNVC: 9

20 Mar 2009

5340-27-042-3830
Bow Handle

270423830
KOL-BEYAZ: RNCC: 2 | RNVC: 1
06071102: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-060-0371
Mounting Bracket

270600371
MM-7490-0620: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-041-7952
Mounting Bracket

270417952
1-002-005: RNCC: 1 | RNVC: 2

18 Jun 2008

5340-27-060-0587
Mounting Bracket

270600587
MM-7490-0307: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-028-4674
Mending Plate

270284674
72A25-35404-AA: RNCC: 2 | RNVC: 1

3 Jan 2006

5340-27-033-6532
Angle Bracket

270336532
40-205-4053: RNCC: 2 | RNVC: 1
40-205-4053: RNCC: 2 | RNVC: 1

9 Nov 2006

5340-27-022-4397
Pad Eye

270224397
39001: RNCC: 2 | RNVC: 1

10 Mar 2004

5340-27-014-1947
Loop Clamp

270141947
CDM-104: RNCC: 2 | RNVC: 1
CDM-104: RNCC: 2 | RNVC: 1
CDM-104: RNCC: 2 | RNVC: 1
90464-07209-00: RNCC: 2 | RNVC: 1

23 Sep 2002

5340-27-028-7750
Mounting Bracket

270287750
884-5800-977: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-036-2374
Sliding Door Track

270362374
3C46E513A12BB: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-032-6190
Access Cover

270326190
40-765-2001: RNCC: 2 | RNVC: 1
40-765-2001: RNCC: 2 | RNVC: 1

23 Aug 2006

5340-27-023-5112
Mounting Bracket

270235112
1010FK-0000117: RNCC: 2 | RNVC: 1

8 Jul 2004

5340-27-018-3689
Loop Clamp

270183689
2100635: RNCC: 2 | RNVC: 1
90465-10098-00: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-060-0561
Mounting Bracket

270600561
AC-7490-0051: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-056-2964
Mounting Bracket

270562964
MM-7560-0332: RNCC: 3 | RNVC: 2

12 Mar 2012

5340-27-058-3001
Mending Plate

270583001
0421 4358: RNCC: 2 | RNVC: 1

7 Jan 2013

5340-27-027-2661
Mortise Lock

270272661
KAPI KILIDI, BOLME PANEL: RNCC: 2 | RNVC: 1
80: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-050-0573
Mending Plate

270500573
102834: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-053-1068
Mending Plate

270531068
105457: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-27-021-4061
Mounting Bracket

270214061
1009.1KI.0266-10: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-018-6639
Mounting Bracket

270186639
1010FK-2702310: RNCC: 2 | RNVC: 1
HSN06-032: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-015-8680
Mortise Lock

270158680
99999-NIIN-DA0052445: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-020-9504
Mending Plate

270209504
1010FG-0000338: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-029-8212
Mending Plate

270298212
3LD-13151-00-00: RNCC: 5 | RNVC: 9

25 May 2006

5340-27-019-8069
Access Cover

270198069
6300936: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-020-9789
Mending Plate

270209789
1010FG-0402502: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-3905
Latch Bar

270583905
M2945-006: RNCC: 2 | RNVC: 1

21 Jan 2013

5340-27-021-4282
Angle Bracket

270214282
1010FG-0100434: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-3351
Mounting Bracket

270443351
12E00-03507-AA: RNCC: 2 | RNVC: 1

28 Jan 2009

5340-27-021-0355
Mounting Bracket

270210355
1009.1KI.0236-1*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-003-8201
Access Cover

270038201
6040-0516-4013: RNCC: 2 | RNVC: 1
6040-0516-4013: RNCC: 3 | RNVC: 1

8 Nov 1994

5340-27-020-9499
Mending Plate

270209499
1010FG-0000720: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-060-0499
Mounting Bracket

270600499
MM-7490-0463: RNCC: 2 | RNVC: 1

2 Jan 2014

5340-27-057-9937
Mounting Bracket

270579937
50527-ZY3-000: RNCC: 2 | RNVC: 1

28 Nov 2012

5340-27-006-8231
Mounting Bracket

270068231
MWC1812-LD: RNCC: 2 | RNVC: 1

17 May 1999

5340-27-056-9341
Mounting Bracket

270569341
F01-01-055: RNCC: 2 | RNVC: 1

31 May 2012

5340-27-001-2953
Loop Clamp

270012953
205-030-407-169: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-056-7095
Mounting Bracket

270567095
MM-7412-0198: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-045-9829
Filler Opening Cap

270459829
90706058: RNCC: 3 | RNVC: 2

25 Jun 2009

5340-27-007-1742
Retaining Clip

270071742
E 865643 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-044-1710
Mending Plate

270441710
17605-00: RNCC: 2 | RNVC: 1

13 Jan 2009

5340-27-024-1115
Angle Bracket

270241115
901-TK-289I: RNCC: 2 | RNVC: 1

17 Sep 2004

5340-27-038-2385
Loop Clamp

270382385
73B05-61343-AA: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-020-7855
Mounting Bracket

270207855
1009.1KI.0264-1*2-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-9833
Access Cover

270509833
6H4-81337-01: RNCC: 3 | RNVC: 2
6H4-81337-01: RNCC: 3 | RNVC: 2

21 Sep 2010

5340-27-044-7318
Mending Plate

270447318
81.62541-0007: RNCC: 3 | RNVC: 2

9 Mar 2009

5340-27-001-7888
Loop Clamp

270017888
TM55-1520-210-2AN735-032: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-055-3377
Mounting Bracket

270553377
1692-0025: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-055-2859
Mounting Bracket

270552859
C6033-CST-0001: RNCC: 3 | RNVC: 2

28 Nov 2011

5340-27-033-6380
Access Cover

270336380
901-GK-26: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-005-1550
Friction Catch

270051550
1010001065: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-005-1746
Retaining Bail

270051746
1010001934: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-006-9062
Angle Bracket Set

270069062
A 436 320 70 43: RNCC: 2 | RNVC: 1

23 Jun 1999

5340-27-012-5394
Mending Plate

270125394
10131YS0872: RNCC: 2 | RNVC: 1

8 Feb 2002

5340-27-007-1723
Retaining Clip

270071723
E 864442 S81: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-018-2378
Access Cover

270182378
3.01.03.03: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-026-8709
Access Cover

270268709
205-061-642-5: RNCC: 2 | RNVC: 1

8 Aug 2005

5340-27-020-9488
Mending Plate

270209488
1010FG-0000761: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-038-6297
Mending Plate

270386297
83A18-36085-AA: RNCC: 2 | RNVC: 1

23 Oct 2007

5340-27-010-2900
Mounting Bracket

270102900
947717-1: RNCC: 2 | RNVC: 1
947717-1: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-048-0346
Mounting Bracket

270480346
S-008: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-024-8318
Metal Grille

270248318
151060689: RNCC: 2 | RNVC: 1

9 Dec 2004

5340-27-025-0890
Access Cover

270250890
2920-ATF-0030: RNCC: 2 | RNVC: 1

1 Dec 2004

5340-27-033-6374
Angle Bracket

270336374
901-AS-350: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-021-1108
Mounting Bracket

270211108
A-2035-00: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-026-2927
Mending Plate

270262927
MR110604: RNCC: 2 | RNVC: 1

27 Jun 2005

5340-27-038-7323
Mounting Bracket

270387323
10091YY0046: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-028-8500
Mending Plate

270288500
MR144810: RNCC: 2 | RNVC: 1

13 Feb 2006

5340-27-056-4591
Mending Plate

270564591
202966: RNCC: 2 | RNVC: 2

2 Apr 2012

5340-27-032-6305
Mounting Bracket

270326305
13D05-58309-AA: RNCC: 2 | RNVC: 1

25 Aug 2006

5340-27-053-8579
Access Cover

270538579
AK-71100T: RNCC: 2 | RNVC: 2

29 Jun 2011

5340-27-025-3244
Mounting Bracket

270253244
1010FG-0612009: RNCC: 2 | RNVC: 1

24 Feb 2005

5340-27-058-7952
Butt Hinge Leaf

270587952
901-MY-214: RNCC: 2 | RNVC: 1

4 Apr 2013

5340-27-023-1291
Angle Bracket

270231291
1010FK-0000300: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-028-7759
Mounting Bracket

270287759
884-5800-980: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-033-6303
Mounting Bracket

270336303
40-205-3470: RNCC: 2 | RNVC: 1
40-205-3470: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-059-6613
Loop Clamp

270596613
901-KL-366: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-028-7598
Mounting Bracket

270287598
884-5810-947: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-040-2555
Mending Plate

270402555
8200491155: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-050-2309
Mending Plate

270502309
3133691-1: RNCC: 3 | RNVC: 2

9 Jul 2010

5340-27-042-5664
Mending Plate

270425664
54547187: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-009-9335
Access Cover

270099335
98012405: RNCC: 2 | RNVC: 1

11 Oct 2001

5340-27-019-1844
Mounting Bracket

270191844
1461-901-640: RNCC: 2 | RNVC: 1
92VB2282: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-7668
Mounting Bracket

270507668
13E40-07028-AA: RNCC: 2 | RNVC: 1

25 Aug 2010

5340-27-018-4124
Mending Plate

270184124
205-060-936-1: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-059-6771
Loop Clamp

270596771
901-KL-392: RNCC: 2 | RNVC: 1

25 Sep 2013

5340-27-018-6521
Mounting Bracket

270186521
1010FG-0612375: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-001-7893
Loop Clamp

270017893
E-AB-205-T53-4 MS21919-WDG-5: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-028-8555
Mending Plate

270288555
MM-7450-0096-KNM61/A: RNCC: 2 | RNVC: 1

13 Feb 2006

5340-27-058-0558
Caster Wheel

270580558
KK0392246: RNCC: 5 | RNVC: 9
SHN-33: RNCC: 5 | RNVC: 9

5 Dec 2012

5340-27-041-0924
Lock-Release Lever

270410924
1010FK-2701450: RNCC: 2 | RNVC: 1
24FK1-512400.01: RNCC: 2 | RNVC: 1

30 Apr 2008

5340-27-032-4976
Bow Handle

270324976
12A14-72300-AA: RNCC: 2 | RNVC: 1
73B00-72152-AA: RNCC: 2 | RNVC: 1

25 Jul 2006

5340-27-022-1249
Mounting Bracket

270221249
42676: RNCC: 2 | RNVC: 1

12 Feb 2004

5340-27-054-6592
Mending Plate

270546592
98021294: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-27-050-0247
Utility Access Door

270500247
90X4.5X206CM, KASASIZ GIRIS: RNCC: 2 | RNVC: 1

18 Jun 2010

5340-27-008-2177
Angle Bracket

270082177
6040-0517-5020: RNCC: 2 | RNVC: 1
6040-0517-5020: RNCC: 2 | RNVC: 1

10 Aug 2000

5340-27-007-3857
Retaining Clip

270073857
W 700234 S300: RNCC: 2 | RNVC: 1

1 Nov 1999

5340-27-001-7890
Loop Clamp

270017890
TM55-1520-210-2AN735D26: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-050-8501
Access Cover

270508501
6H4-42711-25-4D: RNCC: 3 | RNVC: 2
6H4-42711-25-4D: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-042-1938
Mounting Bracket

270421938
2.HIBM-4L-592/4-15: RNCC: 2 | RNVC: 1

25 Jul 2008

5340-27-017-3836
Lever Bracket

270173836
1009.1IS.0071-D7: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-028-7393
Mounting Bracket

270287393
884-4004-071/C: RNCC: 2 | RNVC: 1

2 Feb 2006

5340-27-027-8010
Mounting Bracket

270278010
71B22-68210-AA: RNCC: 2 | RNVC: 1

7 Nov 2005

5340-27-037-6711
Mounting Bracket

270376711
DA0173705: RNCC: 2 | RNVC: 1

17 Aug 2007

5340-27-008-1684
Handle Grip

270081684
27744: RNCC: 2 | RNVC: 1

28 Jul 2000

5340-27-054-4824
Mounting Bracket

270544824
101C28: RNCC: 3 | RNVC: 2

19 Sep 2011

5340-27-012-5393
Mending Plate

270125393
10131YS0729: RNCC: 2 | RNVC: 1

8 Feb 2002

5340-27-050-8499
Access Cover

270508499
6H4-42613-01-4D: RNCC: 3 | RNVC: 2
6H4-42613-01-4D: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-022-5988
Hand Crank

270225988
TWH12-001: RNCC: 2 | RNVC: 1
06532: RNCC: 2 | RNVC: 1

26 Mar 2004

5340-27-054-0006
Mending Plate

270540006
98018256: RNCC: 2 | RNVC: 2

14 Jul 2011

5340-27-024-2331
Bow Handle

270242331
85340-2D500YL: RNCC: 2 | RNVC: 1

5 Oct 2004

5340-27-053-3937
Mounting Bracket

270533937
H342420602: RNCC: 2 | RNVC: 1

28 Apr 2011

5340-27-021-4089
Mounting Bracket

270214089
1009.1KI.0337-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-5326
Loop Clamp

270595326
VOE952627: RNCC: 3 | RNVC: 2
VOE952627: RNCC: 3 | RNVC: 2

2 Sep 2013

5340-27-048-0401
Mounting Bracket

270480401
SKN-49: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-024-5405
Mounting Bracket

270245405
1010FK-0000251: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-017-6935
Mounting Bracket

270176935
3309-01295: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-020-7165
Handle Ferrule

270207165
1240-ATF-0111: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-041-3587
Mounting Bracket

270413587
GU1B11053A: RNCC: 2 | RNVC: 1

15 May 2008

5340-27-053-0605
Loop Clamp

270530605
901-KT-237: RNCC: 2 | RNVC: 1

23 Mar 2011

5340-27-017-3833
Lever Bracket

270173833
1009.1IS.0071-D3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-057-5549
Mounting Bracket

270575549
M539F329400400: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-049-4743
Mending Plate

270494743
104569: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-023-0749
Lock Key

270230749
150130462: RNCC: 2 | RNVC: 1
15002603025: RNCC: 3 | RNVC: 1
15002603025: RNCC: 3 | RNVC: 1

26 May 2004

5340-27-040-8010
Mending Plate

270408010
MK383891: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-039-4816
Rod End Clevis

270394816
897943050051: RNCC: 2 | RNVC: 1

4 Dec 2007

5340-27-015-6781
Loop Clamp

270156781
05001FK0065: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-018-7132
Mounting Bracket

270187132
1010FK-2702126: RNCC: 2 | RNVC: 1
1010FK-2702126: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-060-0412
Mounting Bracket

270600412
MM-7490-0222: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-051-4896
Mending Plate

270514896
400282-005: RNCC: 3 | RNVC: 2

2 Nov 2010

5340-27-019-2992
Webbing Strap

270192992
10131HK0064: RNCC: 2 | RNVC: 1
10131HK0064: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-012-8540
Mounting Bracket

270128540
10131YS0925: RNCC: 2 | RNVC: 1

27 Mar 2002

5340-27-017-3725
Eye Hook

270173725
1009.1IS.0071-D16: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-035-8611
Mounting Bracket

270358611
3586761: RNCC: 2 | RNVC: 1

4 Apr 2007

5340-27-048-2977
Catch Strike

270482977
TM151112: RNCC: 3 | RNVC: 2

27 Jan 2010

5340-27-013-7966
Expansion Plug

270137966
W700203 S1304: RNCC: 2 | RNVC: 1

24 Jul 2002

5340-27-022-5030
Elastic Strap

270225030
77236KEA000: RNCC: 2 | RNVC: 1
77236KEA000: RNCC: 5 | RNVC: 9

17 Mar 2004

5340-27-053-8451
Mounting Bracket

270538451
C004-000040: RNCC: 2 | RNVC: 2

28 Jun 2011

5340-27-038-1347
Mounting Bracket

270381347
1010FK-2702072: RNCC: 2 | RNVC: 1

17 Sep 2007

5340-27-038-6932
Mounting Bracket

270386932
10091MK0317: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-044-2809
Mounting Bracket

270442809
17411-34: RNCC: 2 | RNVC: 1

22 Jan 2009

5340-27-018-6957
Mounting Bracket

270186957
1010FK-2810507: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-028-2554
Handle Grip

270282554
ALR4127-LD: RNCC: 2 | RNVC: 1

16 Dec 2005

5340-27-044-5584
Handle Grip

270445584
136A 3652: RNCC: 2 | RNVC: 1
136A 3652: RNCC: 4 | RNVC: 9

17 Feb 2009

5340-27-055-2819
Mounting Bracket

270552819
H346075600: RNCC: 2 | RNVC: 1

28 Nov 2011

5340-27-012-5759
Handle Grip

270125759
22V0111200: RNCC: 2 | RNVC: 1

13 Feb 2002

5340-27-049-1588
Bow Handle

270491588
8200863033: RNCC: 3 | RNVC: 2

8 Apr 2010

5340-27-019-2624
Mounting Bracket

270192624
10131YB0075: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-039-1669
Mending Plate

270391669
H 12 PLAKA: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-044-1215
Mounting Bracket

270441215
12E00-50300-AA: RNCC: 2 | RNVC: 1

9 Jan 2009

5340-27-044-0561
Butt Hinge

270440561
0583: RNCC: 2 | RNVC: 1

2 Jan 2009

5340-27-024-1974
Snap Hook

270241974
1010FG-1831168: RNCC: 2 | RNVC: 1

29 Sep 2004

5340-27-021-1726
Access Cover

270211726
1010FK-1911031: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-052-6541
Mending Plate

270526541
107560-304: RNCC: 3 | RNVC: 2

14 Feb 2011

5340-27-048-7681
Corner Brace

270487681
9034-86: RNCC: 2 | RNVC: 1
9034-86: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-038-6251
Mending Plate

270386251
83A11-55435-AA: RNCC: 2 | RNVC: 1

23 Oct 2007

5340-27-059-5582
Angle Bracket

270595582
901-DS-121: RNCC: 2 | RNVC: 1

5 Sep 2013

5340-27-053-8277
Mending Plate

270538277
C173-100200: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-27-027-3800
Loop Clamp

270273800
6040-4037-3033: RNCC: 2 | RNVC: 1

29 Sep 2005

5340-27-059-7604
Mounting Bracket

270597604
9999-0000-0352: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-055-5434
Mounting Bracket

270555434
MM-7412-0151: RNCC: 2 | RNVC: 1

9 Dec 2011

5340-27-017-3856
Mounting Bracket

270173856
1009.1IS.0037: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-048-9643
Mending Plate

270489643
103676: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-052-7370
Mending Plate

270527370
80 48 049 93R: RNCC: 2 | RNVC: 2

21 Feb 2011

5340-27-011-2446
Butt Hinge

270112446
07002YM0314: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-043-0187
Bumper

270430187
40.687.5072: RNCC: 2 | RNVC: 1
40.687.5072: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-053-0736
Mending Plate

270530736
104603: RNCC: 2 | RNVC: 2

24 Mar 2011

5340-27-040-2864
Angle Bracket

270402864
Y535-75002-213: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-020-8909
Mounting Bracket

270208909
1010-1YA-0063: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-043-0092
Angle Bracket

270430092
40.650.1104: RNCC: 2 | RNVC: 1
40.650.1104: RNCC: 2 | RNVC: 1

24 Sep 2008

5340-27-034-6372
Bow Handle

270346372
535A44: RNCC: 2 | RNVC: 1

30 Jan 2007

5340-27-028-7795
Mounting Bracket

270287795
884-5810-933: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-032-2022
Access Cover

270322022
KEB10040-101: RNCC: 2 | RNVC: 1

8 Jun 2006

5340-27-025-9923
Mounting Bracket

270259923
1604401482: RNCC: 2 | RNVC: 1

17 May 2005

5340-27-053-9579
Synchro Clamp

270539579
H343003200: RNCC: 2 | RNVC: 1

11 Jul 2011

5340-27-008-8543
Mounting Bracket

270088543
98000745: RNCC: 2 | RNVC: 1

2 Feb 2001

5340-27-056-7057
Mounting Bracket

270567057
ADOP-SHELTER-180-ARSA: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-060-0406
Mounting Bracket

270600406
MM-7490-0198: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-012-6439
Flush Catch

270126439
6030-0534-1004: RNCC: 2 | RNVC: 1
6030-0534-1004: RNCC: 2 | RNVC: 1

27 Feb 2002

5340-27-057-9877
Mounting Bracket

270579877
40155-ZY3-000: RNCC: 2 | RNVC: 1

27 Nov 2012

5340-27-051-5612
Mending Plate

270515612
108465: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-27-006-9205
Mounting Bracket

270069205
91AG A03479 AF: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-056-2959
Mounting Bracket

270562959
MM-7560-0349: RNCC: 3 | RNVC: 2

12 Mar 2012

5340-27-001-2967
Loop Clamp

270012967
205-030-469-4: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-057-5717
Padlock

270575717
39428-1557A999: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-057-6076
Mounting Bracket

270576076
ALTFC01294: RNCC: 2 | RNVC: 1

12 Sep 2012

5340-27-013-0073
Angle Bracket

270130073
THPB00120-167: RNCC: 2 | RNVC: 1

9 Apr 2002

5340-27-042-9751
Mounting Bracket

270429751
40.621.0124: RNCC: 2 | RNVC: 1
40.621.0124: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-034-7585
Mounting Bracket

270347585
ATOKHAMILUCAKSAVARMAKINALITUFEK: RNCC: 2 | RNVC: 1

7 Feb 2007

5340-27-026-2134
Access Cover

270262134
06148: RNCC: 2 | RNVC: 1

17 Jun 2005

5340-27-059-2880
Access Cover

270592880
CM012018-24: RNCC: 2 | RNVC: 1

8 Jul 2013

5340-27-010-9796
Dashpot Piston

270109796
73 3571 3055: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-014-8300
Bridge Clamp

270148300
7700703941: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-050-6094
Mounting Bracket

270506094
318E61: RNCC: 3 | RNVC: 2

10 Aug 2010

5340-27-021-1935
Mending Plate

270211935
1010FG-1801293: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-037-8596
Mounting Bracket

270378596
46289-89976: RNCC: 5 | RNVC: 9

31 Aug 2007

5340-27-018-3416
Stand Base

270183416
10121YK5540: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-025-6713
Mounting Bracket

270256713
1010FG-2201541-2: RNCC: 2 | RNVC: 1

28 Mar 2005

5340-27-042-5658
Mending Plate

270425658
54546577: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-009-1630
Mending Plate

270091630
12-106-017: RNCC: 2 | RNVC: 1

14 May 2001

5340-27-053-8207
Mending Plate

270538207
C123-1G0000: RNCC: 2 | RNVC: 2

23 Jun 2011

Load More Results