What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 13 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 13 of 53

5340-27-018-3439
Mounting Bracket

270183439
821134-4: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-060-0366
Mounting Bracket

270600366
MN-7490-0049: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-022-8214
Loop Clamp

270228214
7.02.07.02: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-049-8478
Mending Plate

270498478
109161: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-058-1066
Bridge Clamp

270581066
A820X8287HA01: RNCC: 2 | RNVC: 1
A820X8287HA01: RNCC: 5 | RNVC: 9

10 Dec 2012

5340-27-025-3299
Bail Handle

270253299
05001DK0450: RNCC: 2 | RNVC: 1

24 Feb 2005

5340-27-041-1080
Lever Bracket

270411080
M522D217820000: RNCC: 2 | RNVC: 1

30 Apr 2008

5340-27-038-2235
Mounting Bracket

270382235
3583480: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-006-9409
Mounting Bracket

270069409
91AG 17N803 AB: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-010-2932
Mending Plate

270102932
10131YS0777: RNCC: 2 | RNVC: 1

23 Nov 2001

5340-27-042-1051
Mending Plate

270421051
48519: RNCC: 2 | RNVC: 1

18 Jul 2008

5340-27-005-1701
Access Cover

270051701
1010001234: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-059-3127
Access Cover

270593127
98014500-S5: RNCC: 2 | RNVC: 1

11 Jul 2013

5340-27-053-3674
Mounting Bracket

270533674
H341150101: RNCC: 2 | RNVC: 1

25 Apr 2011

5340-27-018-6995
Mounting Bracket

270186995
1010FK-2810703: RNCC: 2 | RNVC: 1
1010FK-2810703: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-007-4343
Mounting Bracket

270074343
92FB B62580 AA: RNCC: 2 | RNVC: 1

11 Nov 1999

5340-27-038-7437
Mounting Bracket

270387437
10091YP0975: RNCC: 2 | RNVC: 1

30 Oct 2007

5340-27-057-7136
Crank Handle

270577136
73 3579 1854: RNCC: 2 | RNVC: 1

2 Oct 2012

5340-27-043-0052
Handle Grip

270430052
40.626.0219: RNCC: 2 | RNVC: 1
40.626.0219: RNCC: 2 | RNVC: 1

24 Sep 2008

5340-27-020-7864
Mounting Bracket

270207864
1009.1KI.0303-4*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-016-8206
Mounting Bracket

270168206
7A79350: RNCC: 2 | RNVC: 1

18 Mar 2003

5340-27-055-3864
Mounting Bracket

270553864
H233200300: RNCC: 2 | RNVC: 1

2 Dec 2011

5340-27-004-6059
Loop Clamp

270046059
10131YK1023: RNCC: 3 | RNVC: 2

15 May 1996

5340-27-040-4154
Mounting Bracket

270404154
8585378: RNCC: 2 | RNVC: 1

22 Jan 2008

5340-27-058-4911
Mounting Bracket

270584911
VOE12745614: RNCC: 3 | RNVC: 2
VOE12745614: RNCC: 3 | RNVC: 2

12 Feb 2013

5340-27-058-6183
Access Cover

270586183
VOE12741734: RNCC: 3 | RNVC: 2
VOE12741734: RNCC: 3 | RNVC: 2

27 Feb 2013

5340-27-046-4281
Utility Access Door

270464281
CAM KAPI 60X210CM: RNCC: 2 | RNVC: 1

7 Aug 2009

5340-27-038-8883
Mounting Bracket

270388883
7335792286: RNCC: 2 | RNVC: 1

5 Nov 2007

5340-27-004-5112
Access Cover

270045112
10121YK5231: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-021-1044
Access Cover

270211044
1010FK-3517336: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-033-9179
Mounting Bracket

270339179
0000GK0136215: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-051-2491
Mounting Bracket

270512491
16F00-58301-AA: RNCC: 2 | RNVC: 1

12 Oct 2010

5340-27-028-8035
Mending Plate

270288035
20094838: RNCC: 2 | RNVC: 1

8 Feb 2006

5340-27-023-1482
Expansion Plug

270231482
10121YT5646: RNCC: 2 | RNVC: 1
7521891: RNCC: 2 | RNVC: 1

1 Jun 2004

5340-27-019-5537
Mounting Bracket

270195537
07002YH0081: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-032-9459
Bow Handle

270329459
1827688: RNCC: 2 | RNVC: 1

2 Oct 2006

5340-27-024-9455
Compression Cup

270249455
KP08: RNCC: 2 | RNVC: 1
R1-R2 KP08: RNCC: 5 | RNVC: 9

18 Dec 2004

5340-27-018-2484
Mounting Bracket

270182484
98012789: RNCC: 2 | RNVC: 1

12 Nov 2003

5340-27-040-6164
Loop Clamp

270406164
4543110895: RNCC: 2 | RNVC: 1

4 Feb 2008

5340-27-015-7292
Butt Hinge

270157292
16001DM0055: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-032-8180
Mounting Bracket

270328180
4329252: RNCC: 2 | RNVC: 1

20 Sep 2006

5340-27-057-9857
Mending Plate

270579857
24124-ZY3-310: RNCC: 2 | RNVC: 1

26 Nov 2012

5340-27-019-6299
Bail Handle

270196299
05001HK0324: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-051-3227
Mounting Bracket

270513227
55RS860107: RNCC: 2 | RNVC: 1

15 Oct 2010

5340-27-051-4098
Mending Plate

270514098
105801: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-052-5744
Catch Strike

270525744
82 57 000 04R: RNCC: 2 | RNVC: 2

7 Feb 2011

5340-27-048-9613
Mending Plate

270489613
102827: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-040-5201
Mounting Bracket

270405201
11615459-1: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-015-0388
Loop Clamp

270150388
7392322: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-014-7574
Roller Holder

270147574
517032101: RNCC: 2 | RNVC: 1

26 Nov 2002

5340-27-022-2456
Mending Plate

270222456
19125MBT610: RNCC: 2 | RNVC: 1
19125MBT610: RNCC: 5 | RNVC: 9

19 Feb 2004

5340-27-022-5015
Mending Plate

270225015
19112MBB003: RNCC: 2 | RNVC: 1
19112MBB003: RNCC: 5 | RNVC: 9

17 Mar 2004

5340-27-048-9638
Mending Plate

270489638
103669: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-022-4430
Expansion Shield

270224430
DA0012289: RNCC: 2 | RNVC: 1
10131MD0219: RNCC: 2 | RNVC: 1

10 Mar 2004

5340-27-055-0321
Access Cover

270550321
EMP.10.038: RNCC: 2 | RNVC: 1

31 Oct 2011

5340-27-045-2478
Mending Plate

270452478
5220B334: RNCC: 3 | RNVC: 2

17 Apr 2009

5340-27-055-7860
Access Cover

270557860
5122029: RNCC: 2 | RNVC: 2

4 Jan 2012

5340-27-004-5533
Loop Clamp

270045533
10091YK5053: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-047-2978
Mounting Bracket

270472978
897373034051: RNCC: 2 | RNVC: 1

19 Nov 2009

5340-27-017-3474
Mounting Bracket

270173474
98013835: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-045-1670
Bow Handle

270451670
A2107500784: RNCC: 3 | RNVC: 2

13 Apr 2009

5340-27-055-8748
Rod End Connector

270558748
6111.5313-3: RNCC: 2 | RNVC: 1

11 Jan 2012

5340-27-011-4855
Access Cover

270114855
4571715022: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-028-8539
Mending Plate

270288539
10003919: RNCC: 2 | RNVC: 1

13 Feb 2006

5340-27-029-1064
Catch Strike

270291064
10131YD2031: RNCC: 2 | RNVC: 1

2 Mar 2006

5340-27-047-2826
Bumper

270472826
E3: RNCC: 2 | RNVC: 1

18 Nov 2009

5340-27-021-9965
Handle Grip

270219965
22647: RNCC: 2 | RNVC: 1

20 Jan 2004

5340-27-043-0240
Angle Bracket

270430240
40.780.4004: RNCC: 2 | RNVC: 1
40.780.4004: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-034-1645
Mortise Lock

270341645
13D00-55124-AA: RNCC: 2 | RNVC: 1

14 Dec 2006

5340-27-034-1558
Expansion Plug

270341558
IND5: RNCC: 2 | RNVC: 1

14 Dec 2006

5340-27-018-8464
Access Cover

270188464
269A8593-5: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-028-6378
T Bracket

270286378
1.HIBM-1I-2316: RNCC: 2 | RNVC: 1

25 Jan 2006

5340-27-015-0454
Loop Clamp

270150454
10903746: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-0403
Loop Clamp

270150403
7528348: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-054-6612
Mounting Bracket

270546612
55RS752901: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-027-7042
Mounting Bracket

270277042
M52T3011R450126: RNCC: 2 | RNVC: 1

21 Oct 2005

5340-27-054-5541
Mounting Bracket

270545541
98022772: RNCC: 3 | RNVC: 2

23 Sep 2011

5340-27-056-8666
Mending Plate

270568666
203419: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-036-7523
Mending Plate

270367523
15TKSUT0406: RNCC: 2 | RNVC: 1

22 Jun 2007

5340-27-005-1788
Shimmy Damper

270051788
1010001559: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-023-1453
Pad Eye

270231453
KMS 0050: RNCC: 2 | RNVC: 1

1 Jun 2004

5340-27-023-1579
Expansion Plug

270231579
10121YT5652: RNCC: 2 | RNVC: 1
501569: RNCC: 2 | RNVC: 1

2 Jun 2004

5340-27-036-0137
Angle Bracket

270360137
10025920: RNCC: 2 | RNVC: 1

18 Apr 2007

5340-27-013-7336
Catch Strike

270137336
8724 75: RNCC: 2 | RNVC: 1

17 Jul 2002

5340-27-035-7982
Sliding Door Track

270357982
51769061: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-054-6676
Mounting Bracket

270546676
55RS560022: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-010-1327
Loop Clamp

270101327
DZJK000006: RNCC: 2 | RNVC: 1

7 Nov 2001

5340-27-018-8651
Webbing Strap

270188651
11051DK0012: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-1545
Mounting Bracket

270581545
1010FMA-1801348: RNCC: 2 | RNVC: 1

17 Dec 2012

5340-27-052-1663
Utility Access Door

270521663
RCPK80: RNCC: 2 | RNVC: 1

23 Dec 2010

5340-27-054-8143
Mending Plate

270548143
C05A88: RNCC: 2 | RNVC: 1

17 Oct 2011

5340-27-053-2885
Mounting Bracket

270532885
H341152100: RNCC: 2 | RNVC: 1

15 Apr 2011

5340-27-013-1991
Mending Plate

270131991
81.97488.0324: RNCC: 2 | RNVC: 1

13 May 2002

5340-27-016-6357
Mounting Bracket

270166357
98013030: RNCC: 2 | RNVC: 1

20 Feb 2003

5340-27-013-0970
Angle Bracket

270130970
81.97487.0599: RNCC: 2 | RNVC: 1

25 Apr 2002

5340-27-056-6632
Mounting Bracket

270566632
MM-7412-0037: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-036-4215
Expansion Shield

270364215
DUBEL 3/8X50 MM UNC: RNCC: 2 | RNVC: 1

4 Jun 2007

5340-27-004-5136
Access Cover

270045136
10121YK5393: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-045-9322
Loop Clamp

270459322
144OCT1209075: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-048-9626
Mending Plate

270489626
103655: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-012-2398
Expansion Plug

270122398
10131YT0581: RNCC: 2 | RNVC: 1

21 Jan 2002

5340-27-003-9223
Flush Catch Claw

270039223
07001YK0003: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-028-1149
Loop Clamp

270281149
35203: RNCC: 2 | RNVC: 1
35203: RNCC: 5 | RNVC: 9

2 Dec 2005

5340-27-022-1519
Hand Crank

270221519
06334: RNCC: 2 | RNVC: 1
12252238: RNCC: 5 | RNVC: 9

13 Feb 2004

5340-27-053-2373
Mounting Bracket

270532373
H340102201: RNCC: 2 | RNVC: 1

11 Apr 2011

5340-27-021-0735
Catch Strike

270210735
1009.1KI.0130-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-008-5545
Hook Handle

270085545
P.T1654: RNCC: 2 | RNVC: 1

3 Nov 2000

5340-27-059-6918
Hand Crank

270596918
24 V21 154 91: RNCC: 2 | RNVC: 1

27 Sep 2013

5340-27-042-5798
Access Cover

270425798
54551254: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-025-4030
Angle Bracket

270254030
AN743Z13: RNCC: 2 | RNVC: 1

11 Mar 2005

5340-27-049-9680
Mending Plate

270499680
32110714: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-036-4128
Loop Clamp

270364128
3C469628AA: RNCC: 2 | RNVC: 1

1 Jun 2007

5340-27-048-9254
Angle Bracket

270489254
10029371: RNCC: 2 | RNVC: 1

18 Mar 2010

5340-27-055-1365
Sliding Door Track

270551365
1C15V25000BF: RNCC: 2 | RNVC: 1

15 Nov 2011

5340-27-049-8491
Mending Plate

270498491
109108: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-054-6017
Mounting Bracket

270546017
H348014100: RNCC: 2 | RNVC: 1

30 Sep 2011

5340-27-023-5724
Mounting Bracket

270235724
1934071103: RNCC: 2 | RNVC: 1
4.04.02.02: RNCC: 2 | RNVC: 1

14 Jul 2004

5340-27-054-6678
Mounting Bracket

270546678
57RS309654: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-050-6526
Mending Plate

270506526
108A15: RNCC: 2 | RNVC: 1

12 Aug 2010

5340-27-020-1426
Flush Catch Claw

270201426
7700619765: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-025-3971
Mounting Bracket

270253971
L04A07: RNCC: 2 | RNVC: 1

11 Mar 2005

5340-27-040-8639
Mending Plate

270408639
ME411926: RNCC: 2 | RNVC: 1

3 Apr 2008

5340-27-057-6103
Mounting Bracket

270576103
ALTFC01013: RNCC: 2 | RNVC: 1

12 Sep 2012

5340-27-021-1074
Bridge Clamp

270211074
05001ZK0002: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-034-0922
Mounting Bracket

270340922
621024091071: RNCC: 2 | RNVC: 1

11 Dec 2006

5340-27-034-7336
Bow Handle

270347336
13C04-72308-AA: RNCC: 2 | RNVC: 1

5 Feb 2007

5340-27-047-3039
Mounting Bracket

270473039
EWQ500040: RNCC: 2 | RNVC: 1

19 Nov 2009

5340-27-034-7831
Mending Plate

270347831
22112064: RNCC: 2 | RNVC: 1

8 Feb 2007

5340-27-054-6697
Flush Catch

270546697
2B61414: RNCC: 3 | RNVC: 2

6 Oct 2011

5340-27-013-6952
Access Cover

270136952
98011344: RNCC: 2 | RNVC: 1

15 Jul 2002

5340-27-011-0541
Access Cover

270110541
4494303006: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-059-3144
Mending Plate

270593144
98023084: RNCC: 2 | RNVC: 1

11 Jul 2013

5340-27-013-3907
Catch Strike

270133907
1C15 V44163 BA: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-045-2485
Mounting Bracket

270452485
MR520530: RNCC: 3 | RNVC: 2
MR520530: RNCC: 5 | RNVC: 2

17 Apr 2009

5340-27-056-6662
Mounting Bracket

270566662
ADOP-SHELTER-180-SLT: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-027-9139
Mending Plate

270279139
1010FG-0608090: RNCC: 2 | RNVC: 1
1010FG-0608090: RNCC: 5 | RNVC: 9

17 Nov 2005

5340-27-023-3443
Access Cover

270233443
1010FG-1801062: RNCC: 2 | RNVC: 1

23 Jun 2004

5340-27-008-2508
Angle Bracket

270082508
98010314: RNCC: 2 | RNVC: 1

29 Aug 2000

5340-27-056-5529
Access Cover

270565529
3832023: RNCC: 2 | RNVC: 2

10 Apr 2012

5340-27-034-6112
Mounting Bracket

270346112
514A48: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-049-4748
Mounting Bracket

270494748
104544: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-040-8648
Mending Plate

270408648
MB025126: RNCC: 2 | RNVC: 1

3 Apr 2008

5340-27-014-7635
Lock Key

270147635
134250110: RNCC: 2 | RNVC: 1

27 Nov 2002

5340-27-021-3075
Mending Plate

270213075
1012.1HSCA.02-07: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-3121
Access Cover

270593121
98023121: RNCC: 2 | RNVC: 1

11 Jul 2013

5340-27-019-5453
Snap Hook

270195453
07002YK0316: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-009-7877
Butt Hinge

270097877
50 CM BOY MENTESE: RNCC: 2 | RNVC: 1

7 Sep 2001

5340-27-041-4083
Mending Plate

270414083
41376: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-042-5187
Compression Cup

270425187
1010006218: RNCC: 2 | RNVC: 1

21 Aug 2008

5340-27-050-8697
Mounting Bracket

270508697
63D-42510-10-4D: RNCC: 3 | RNVC: 2
63D-42510-10-4D: RNCC: 3 | RNVC: 2

6 Sep 2010

5340-27-033-6298
Mounting Bracket

270336298
40-205-3035: RNCC: 2 | RNVC: 1
40-205-3035: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-033-6565
Access Cover

270336565
40-205-3372: RNCC: 2 | RNVC: 1
40-205-3372: RNCC: 2 | RNVC: 1

9 Nov 2006

5340-27-001-2907
Blank Panel

270012907
204-075-266-021: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-019-6228
Butt Hinge

270196228
05001HM0054: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-013-3101
Mending Plate

270133101
83.96101.0524: RNCC: 2 | RNVC: 1

29 May 2002

5340-27-041-4285
Bow Handle

270414285
GU1M6321A: RNCC: 2 | RNVC: 1

22 May 2008

5340-27-056-8677
Mending Plate

270568677
202263: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-010-1106
Mounting Bracket

270101106
98000350: RNCC: 2 | RNVC: 1

5 Nov 2001

5340-27-050-7878
Mounting Bracket

270507878
13C44-57418-AA: RNCC: 2 | RNVC: 1

26 Aug 2010

5340-27-008-0413
Retaining Strap

270080413
8564292: RNCC: 2 | RNVC: 1

8 Jun 2000

5340-27-043-0993
Mounting Bracket

270430993
2ABEP00978: RNCC: 2 | RNVC: 1

13 Oct 2008

5340-27-039-7864
Mounting Bracket

270397864
897380437051: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-046-7566
Mounting Bracket

270467566
898007980051: RNCC: 2 | RNVC: 1

6 Oct 2009

5340-27-021-4083
Mounting Bracket

270214083
1009.1KI.0263-7*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-9214
Mounting Bracket

270509214
13C45-32188-AA: RNCC: 2 | RNVC: 1

16 Sep 2010

5340-27-023-5483
Angle Bracket

270235483
10121YK0993: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-013-5231
Truss Fairlead

270135231
EA06 09: RNCC: 2 | RNVC: 1

25 Jun 2002

5340-27-017-3837
Lever Bracket

270173837
1009.1IS.0071-D9: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-015-0435
Loop Clamp

270150435
7992088: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-054-2850
Bow Handle

270542850
98022170: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-047-1088
Mounting Bracket

270471088
73A24-76020-AA: RNCC: 2 | RNVC: 1

5 Nov 2009

5340-27-010-2331
Mounting Bracket

270102331
98005932: RNCC: 2 | RNVC: 1

16 Nov 2001

5340-27-038-7310
Mending Plate

270387310
11649823: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-026-1952
Mounting Bracket

270261952
06 08 521 202: RNCC: 2 | RNVC: 1

16 Jun 2005

5340-27-050-0574
Mending Plate

270500574
102836: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-005-1775
Mortise Latch

270051775
1010001953: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-043-6536
Mounting Bracket

270436536
YS 01 02 03 00: RNCC: 3 | RNVC: 2

28 Nov 2008

5340-27-011-0548
Access Cover

270110548
7171230281: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-018-3047
Mending Plate

270183047
10121YS5537: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-029-0070
Mounting Bracket

270290070
10121YD5413: RNCC: 2 | RNVC: 1

22 Feb 2006

5340-27-009-9594
Angle Bracket

270099594
98012618: RNCC: 2 | RNVC: 1

18 Oct 2001

5340-27-059-2648
Mounting Bracket

270592648
55RS752987: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-056-3386
Bridge Clamp

270563386
3831700: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-27-045-1957
Mending Plate

270451957
MN103210: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-27-007-4100
Mounting Bracket

270074100
95AG 18A005 AB: RNCC: 2 | RNVC: 1

4 Nov 1999

5340-27-053-3931
Loop Clamp

270533931
NO7/4070090: RNCC: 2 | RNVC: 1

28 Apr 2011

5340-27-018-6316
Strapping Seal

270186316
1010FG-0306107: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-7612
Mounting Bracket

270487612
189390-001-0: RNCC: 2 | RNVC: 1

25 Feb 2010

5340-27-044-4808
Sliding Door Track

270444808
12E01-55415-AA: RNCC: 2 | RNVC: 1

11 Feb 2009

5340-27-040-1646
Catch Strike

270401646
897235985151: RNCC: 2 | RNVC: 1

9 Jan 2008

5340-27-021-3105
Mending Plate

270213105
1012.1HSCA.02-11: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-033-9306
Mending Plate

270339306
13C00-57231-AA: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-019-5481
Bail Handle

270195481
07002YK0301: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-056-3392
Access Cover

270563392
3833335: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-27-041-4030
Utility Access Door

270414030
78X190 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-037-5383
Catch Strike

270375383
7779775: RNCC: 2 | RNVC: 1

3 Aug 2007

5340-27-053-5089
Mounting Bracket

270535089
H342700801: RNCC: 2 | RNVC: 1

12 May 2011

5340-27-058-8141
Loop Clamp

270588141
0114 8821: RNCC: 2 | RNVC: 1

8 Apr 2013

5340-27-041-2735
Mending Plate

270412735
7253448: RNCC: 2 | RNVC: 1

12 May 2008

5340-27-045-2403
Mounting Bracket

270452403
1010006613: RNCC: 2 | RNVC: 1

17 Apr 2009

5340-27-021-4334
Mounting Bracket

270214334
1012.1HSCA.03-44: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-038-3788
Catch Strike

270383788
387001054101: RNCC: 2 | RNVC: 1

3 Oct 2007

5340-27-026-3011
Loop Clamp

270263011
0009951401: RNCC: 2 | RNVC: 1

27 Jun 2005

5340-27-045-2443
Mending Plate

270452443
6420A002: RNCC: 3 | RNVC: 2

17 Apr 2009

5340-27-052-6276
Bow Handle

270526276
897853054401: RNCC: 3 | RNVC: 2

10 Feb 2011

5340-27-058-7799
Mounting Bracket

270587799
VOE12742753: RNCC: 3 | RNVC: 2

2 Apr 2013

5340-27-054-7450
Mending Plate

270547450
201367: RNCC: 2 | RNVC: 2

12 Oct 2011

5340-27-059-2712
Mounting Bracket

270592712
55RS551824: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-057-3494
Mounting Bracket

270573494
MM-7560-0351: RNCC: 2 | RNVC: 1

23 Jul 2012

5340-27-055-9894
Flush Catch

270559894
5340-TJ-03394: RNCC: 2 | RNVC: 1

20 Jan 2012

5340-27-034-7836
Mending Plate

270347836
59123802: RNCC: 2 | RNVC: 1

8 Feb 2007

5340-27-035-7791
Rigid Caster

270357791
2ABEP00159: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-020-0186
Mounting Bracket

270200186
11051YU0050: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-025-5023
Mounting Bracket

270255023
1010FG-1800045: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-057-6105
Mounting Bracket

270576105
ALTFC01129: RNCC: 2 | RNVC: 1

12 Sep 2012

5340-27-009-6111
Mounting Bracket

270096111
4414621: RNCC: 2 | RNVC: 1

3 Aug 2001

5340-27-022-9087
Mounting Bracket

270229087
3.05.05.03: RNCC: 2 | RNVC: 1

4 May 2004

5340-27-050-3900
Mending Plate

270503900
105282-2: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-051-5610
Mending Plate

270515610
103005: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-27-025-1850
Mounting Bracket

270251850
1010FK-2701909: RNCC: 2 | RNVC: 1

25 Jan 2005

5340-27-053-9236
Mending Plate

270539236
109839: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-049-9672
Mending Plate

270499672
HD110513X: RNCC: 2 | RNVC: 2
HD110513X: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-058-9549
Loop Clamp

270589549
VOE12739106: RNCC: 3 | RNVC: 2

8 May 2013

5340-27-005-4536
Rod End Clevis

270054536
37H-6436: RNCC: 3 | RNVC: 2

3 Dec 1997

5340-27-048-1451
Mounting Bracket

270481451
12E02-36593-AA: RNCC: 3 | RNVC: 2

11 Jan 2010

5340-27-050-7690
Mounting Bracket

270507690
13C40-16747-AA: RNCC: 2 | RNVC: 1

26 Aug 2010

5340-27-005-1452
Loop Clamp

270051452
1010000522: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-034-7972
Mounting Bracket

270347972
13217013: RNCC: 2 | RNVC: 1

9 Feb 2007

5340-27-007-1719
Retaining Clip

270071719
E 864176 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-021-3043
Truss Fairlead

270213043
10131MM0092: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-004-5119
Access Cover

270045119
10121YK5263: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-040-6492
Webbing Strap

270406492
25X3: RNCC: 2 | RNVC: 1

15 Feb 2008

5340-27-055-6673
Mending Plate

270556673
5099942: RNCC: 2 | RNVC: 2

22 Dec 2011

5340-27-016-9926
Angle Bracket

270169926
83.43705.5504: RNCC: 2 | RNVC: 1

25 Apr 2003

5340-27-020-1390
Bridge Clamp

270201390
7700550346: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-022-2311
Mounting Bracket

270222311
1009 1YM 0055: RNCC: 2 | RNVC: 1

19 Feb 2004

5340-27-014-6527
Support Hook

270146527
6040-0516-1017: RNCC: 2 | RNVC: 1
6040-0516-1017: RNCC: 2 | RNVC: 1

14 Nov 2002

5340-27-023-2039
Mounting Bracket

270232039
1010FG-0000713: RNCC: 2 | RNVC: 1

5 Jun 2004

5340-27-042-5656
Handle Grip

270425656
51RS801426: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-053-5991
Expansion Shield

270535991
5 MM: RNCC: 2 | RNVC: 1

25 May 2011

5340-27-047-0707
Mounting Bracket

270470707
13C00-57234-AA: RNCC: 2 | RNVC: 1

2 Nov 2009

5340-27-047-0427
Utility Access Door

270470427
177X234CM ISI YALITIMLI: RNCC: 2 | RNVC: 1

30 Oct 2009

5340-27-042-8401
Catch Strike

270428401
8200031631: RNCC: 2 | RNVC: 1

15 Sep 2008

5340-27-054-1761
Mending Plate

270541761
98019486: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-039-8015
Mounting Bracket

270398015
BMT300-M7: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-004-5552
Access Cover

270045552
10091YK5004: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-054-6606
Mounting Bracket

270546606
55RS752888: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-013-0964
Angle Bracket

270130964
81.97487.0566: RNCC: 2 | RNVC: 1

25 Apr 2002

5340-27-026-8261
Butt Hinge Leaf

270268261
689169: RNCC: 2 | RNVC: 1

3 Aug 2005

5340-27-047-8737
Mounting Bracket

270478737
13H00-72782-AA: RNCC: 2 | RNVC: 1

21 Dec 2009

5340-27-041-4091
Utility Access Door

270414091
108X210 CM AL: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-023-3505
Filler Opening Cap

270233505
05001FK0146: RNCC: 2 | RNVC: 1

23 Jun 2004

5340-27-036-2364
Sliding Door Track

270362364
3C46E513A13AA: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-042-0099
Mortise Lock

270420099
UCGEN KILIT: RNCC: 2 | RNVC: 1

9 Jul 2008

5340-27-021-4080
Mounting Bracket

270214080
1009.1KI.0030/1-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-8486
Mounting Bracket

270208486
2ZLA2-93: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-016-7628
Filler Opening Cap

270167628
2901305: RNCC: 2 | RNVC: 1

12 Mar 2003

5340-27-043-8931
Utility Access Door

270438931
80X201 CM KAPI, ALUMINYUM: RNCC: 2 | RNVC: 1

22 Dec 2008

5340-27-040-3152
Mounting Bracket

270403152
12257191: RNCC: 2 | RNVC: 1

18 Jan 2008

5340-27-020-1312
Loop Clamp

270201312
6000046147: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-6106
Mounting Bracket

270506106
336E35: RNCC: 2 | RNVC: 1

10 Aug 2010

5340-27-053-8030
Mending Plate

270538030
C175-000020: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-27-038-9576
Mending Plate

270389576
83A24-73239-AA: RNCC: 2 | RNVC: 1

6 Nov 2007

5340-27-048-0947
Bow Handle

270480947
7700430039: RNCC: 3 | RNVC: 2

6 Jan 2010

5340-27-044-2019
Mounting Bracket

270442019
12E02-68119-AA: RNCC: 2 | RNVC: 1
12E02-68119-AA: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-039-3396
Loop Clamp

270393396
10131YK2063: RNCC: 2 | RNVC: 1

27 Nov 2007

5340-27-016-5793
Loop Holder

270165793
8B74929: RNCC: 2 | RNVC: 1

6 Feb 2003

5340-27-025-9454
Mounting Bracket

270259454
8712030644: RNCC: 2 | RNVC: 1

9 May 2005

5340-27-053-1380
Mending Plate

270531380
10026191: RNCC: 2 | RNVC: 1

31 Mar 2011

5340-27-038-8588
Mounting Bracket

270388588
2ABEP00252: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-006-8182
Elbow Catch

270068182
K0C8180: RNCC: 2 | RNVC: 1

13 May 1999

5340-27-048-4659
Bridge Clamp

270484659
BW306008012D: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-27-015-8379
Mortise Lock

270158379
02TMO4BKO1010: RNCC: 2 | RNVC: 1

15 May 2002

5340-27-036-5851
Mounting Bracket

270365851
C70G94: RNCC: 2 | RNVC: 1

14 Jun 2007

5340-27-048-9109
Angle Bracket

270489109
10029335: RNCC: 2 | RNVC: 1

17 Mar 2010

5340-27-058-3889
Access Cover

270583889
37707-17100: RNCC: 5 | RNVC: 9

21 Jan 2013

5340-27-038-0173
Mounting Bracket

270380173
83A18-35210-AA: RNCC: 2 | RNVC: 1

10 Sep 2007

5340-27-038-1022
Mounting Bracket

270381022
044-02-107: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-018-6759
Mounting Bracket

270186759
HSN06-021: RNCC: 2 | RNVC: 1
1010FG-1801378: RNCC: 2 | RNVC: 1
1010FG-1801378: RNCC: 2 | RNVC: 1
504: RNCC: 5 | RNVC: 9

15 Nov 2003

5340-27-022-0449
Handle Grip

270220449
1009 1IS 0068A-19: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-022-5009
Mending Plate

270225009
19105MBTD10: RNCC: 2 | RNVC: 1
19105MBTD10: RNCC: 5 | RNVC: 9

17 Mar 2004

5340-27-025-4889
Mounting Bracket

270254889
2ABM 1MK 0056: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-056-5550
Mounting Bracket

270565550
3831899: RNCC: 2 | RNVC: 2

10 Apr 2012

5340-27-018-6563
Mounting Bracket

270186563
1010FG-1206810: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-0554
Flush Catch

270500554
HD150365: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-005-1684
Access Cover

270051684
1010002290: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-007-7682
Bridge Clamp

270077682
10131YK0056: RNCC: 2 | RNVC: 1

11 Feb 2000

5340-27-059-5607
Angle Bracket

270595607
901-DS-138: RNCC: 2 | RNVC: 1

6 Sep 2013

5340-27-040-8630
Mending Plate

270408630
ME014385: RNCC: 2 | RNVC: 1

3 Apr 2008

5340-27-036-8320
Bow Handle

270368320
40.205.3380: RNCC: 2 | RNVC: 1
40.205.3380: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-007-2004
Retaining Clip

270072004
W 703530 S300: RNCC: 2 | RNVC: 1

22 Sep 1999

5340-27-017-3644
Mending Plate

270173644
1009.1IS.0068-B/34: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-9885
Mending Plate

270219885
1009 1AD 0033/1: RNCC: 2 | RNVC: 1

20 Jan 2004

5340-27-052-3844
Mounting Bracket

270523844
79C01-01610-AA: RNCC: 2 | RNVC: 1

17 Jan 2011

5340-27-048-2674
Mending Plate

270482674
269.07.2: RNCC: 2 | RNVC: 1

22 Jan 2010

5340-27-017-3758
Bail Handle

270173758
1009.1IS.0067-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-054-0459
Bridge Clamp

270540459
98018611: RNCC: 3 | RNVC: 2

19 Jul 2011

5340-27-041-4410
Bow Handle

270414410
4C16B24648AA: RNCC: 2 | RNVC: 1

23 May 2008

5340-27-006-9161
Mounting Bracket

270069161
91AB 7L600 AF: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-022-0578
Butt Hinge

270220578
9BM 5340-00021: RNCC: 2 | RNVC: 1

29 Jan 2004

5340-27-041-4920
Mounting Bracket

270414920
83A19-61920-AA: RNCC: 2 | RNVC: 1
GU1M00032A: RNCC: 2 | RNVC: 1

28 May 2008

5340-27-043-2977
Mounting Bracket

270432977
74A05-62158-AA: RNCC: 2 | RNVC: 1

24 Oct 2008

5340-27-055-7974
Support Hook

270557974
AK-901031200: RNCC: 2 | RNVC: 2

5 Jan 2012

5340-27-053-2969
Mounting Bracket

270532969
3MV71210-0005: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-020-7525
Mounting Bracket

270207525
1009.1KI.0264-1*1-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-040-5265
Mounting Bracket

270405265
269046024000: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-059-6577
Loop Clamp

270596577
901-KL-360: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-028-7741
Mounting Bracket

270287741
884-5800-973: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-040-6558
Loop Clamp

270406558
40-110-7808: RNCC: 2 | RNVC: 1

19 Feb 2008

5340-27-043-6902
Utility Access Door

270436902
AL-2455X2545 MM: RNCC: 2 | RNVC: 1

2 Dec 2008

5340-27-013-4541
Catch Strike

270134541
7B82436: RNCC: 2 | RNVC: 1

19 Jun 2002

5340-27-015-8705
Padlock

270158705
99999-NIIN-DA0052439: RNCC: 2 | RNVC: 1
ASMA KILIT: RNCC: 5 | RNVC: 9

17 Dec 2002

5340-27-022-1581
Expansion Plug

270221581
10121YT5558: RNCC: 2 | RNVC: 1

16 Feb 2004

5340-27-054-9775
Mending Plate

270549775
72C09-36559-AA: RNCC: 2 | RNVC: 1

26 Oct 2011

5340-27-012-7084
Support Hook

270127084
8B81803: RNCC: 2 | RNVC: 1

6 Mar 2002

5340-27-017-3691
Pad Eye

270173691
1009.1IS.0043-2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-007-1709
Retaining Clip

270071709
E860503 S102: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-014-1800
Mending Plate

270141800
388881367101: RNCC: 2 | RNVC: 1

1 Oct 2003

5340-27-004-5521
Retaining Strap

270045521
10091YA5024: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-021-1901
Mounting Bracket

270211901
1012.1HSCA.02-41: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-4908
Barrel Bolt

270584908
VOE97694: RNCC: 3 | RNVC: 2
VOE97694: RNCC: 3 | RNVC: 2

12 Feb 2013

5340-27-004-5528
Loop Clamp

270045528
10091YK5045: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-049-7076
Mounting Bracket

270497076
MP002359: RNCC: 2 | RNVC: 1

21 May 2010

5340-27-054-6947
Mending Plate

270546947
98021622: RNCC: 3 | RNVC: 2

7 Oct 2011

5340-27-015-0555
Loop Clamp

270150555
7057332-2: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-046-4132
Mounting Bracket

270464132
M10.1.696: RNCC: 2 | RNVC: 1

5 Aug 2009

5340-27-023-3958
Mounting Bracket

270233958
1010FK-2710402-2: RNCC: 2 | RNVC: 1

26 Jun 2004

5340-27-028-7602
Mounting Bracket

270287602
884-5810-950: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-013-3898
Catch Strike

270133898
YC15 V21982 AB: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-054-7761
Access Cover

270547761
A9452680339: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-035-4974
Bridge Clamp

270354974
51744226: RNCC: 2 | RNVC: 1

15 Mar 2007

5340-27-040-8551
Latch Bar

270408551
7335792211: RNCC: 2 | RNVC: 1

2 Apr 2008

5340-27-027-7840
Mounting Bracket

270277840
2ABM1MK0093: RNCC: 2 | RNVC: 1

2 Nov 2005

5340-27-025-2212
Filler Opening Cap

270252212
5001632276: RNCC: 2 | RNVC: 1

4 Feb 2005

5340-27-016-6682
Mounting Bracket

270166682
98001133-2: RNCC: 2 | RNVC: 1

25 Feb 2003

5340-27-020-7881
Mounting Bracket

270207881
1009.1KI.0303-6*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-5230
Mending Plate

270575230
ALTFC01222: RNCC: 2 | RNVC: 1

24 Aug 2012

5340-27-056-8636
Mending Plate

270568636
203188: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-050-1582
Bridge Clamp

270501582
103091: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-048-0252
Mounting Bracket

270480252
140100099: RNCC: 2 | RNVC: 2
140100099: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-015-0485
Angle Bracket

270150485
1010FK-1811458-3: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-017-3699
Pad Eye

270173699
1009.1IS.0059-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-039-7737
Sliding Door Track

270397737
897241126151: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-040-4673
Mounting Bracket

270404673
11615410-2: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-017-3700
Pad Eye

270173700
1009.1IS.0073-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-059-3670
Access Cover

270593670
VOE20840812: RNCC: 3 | RNVC: 2

23 Jul 2013

5340-27-018-1131
Support Hook

270181131
PVC KANCA KOSELI 125: RNCC: 2 | RNVC: 1
PVC KANCA KOSELI 125: RNCC: 2 | RNVC: 1

3 Nov 2003

5340-27-015-0374
Loop Clamp

270150374
7384953: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-017-3410
Mounting Bracket

270173410
98013607: RNCC: 2 | RNVC: 1

18 Jun 2003

5340-27-057-7795
Mounting Bracket

270577795
1010FMA-1202706: RNCC: 2 | RNVC: 1

19 Oct 2012

5340-27-021-1042
Access Cover

270211042
1010FG-1801261: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-5458
Flush Lock

270075458
Z11.K51 001: RNCC: 2 | RNVC: 1

14 Dec 1999

5340-27-050-2434
Bow Handle

270502434
KOL,62.5MM: RNCC: 2 | RNVC: 1

12 Jul 2010

5340-27-006-9419
Mounting Bracket

270069419
P93AT A016A04 AA: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-041-4508
Mending Plate

270414508
7253818: RNCC: 2 | RNVC: 1

26 May 2008

5340-27-054-6625
Mounting Bracket

270546625
55RS752924: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-028-2912
Loop Clamp

270282912
35202: RNCC: 2 | RNVC: 1

20 Dec 2005

5340-27-013-3905
Catch Strike

270133905
YC15 V44163 AE: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-059-2717
Access Cover

270592717
55RS351025: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-059-0040
Mending Plate

270590040
40.6010.200016 120X218: RNCC: 5 | RNVC: 9

14 May 2013

5340-27-007-4200
Mounting Bracket

270074200
93AG A24321 AD: RNCC: 2 | RNVC: 1

9 Nov 1999

5340-27-017-3646
Mending Plate

270173646
1009.1IS.0071-A1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-3079
Mending Plate

270213079
1012.1HSCA.03-22: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-5333
Access Cover

270565333
3837634: RNCC: 2 | RNVC: 2

9 Apr 2012

5340-27-018-6826
Mounting Bracket

270186826
1010FK-2710407: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-035-0418
Vent Plug

270350418
1010FG-0306173-1: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-017-5283
Rod End Clevis

270175283
ARITA-101-8-22: RNCC: 2 | RNVC: 1
101-8-22: RNCC: 2 | RNVC: 1

9 Jul 2003

5340-27-021-1577
Mounting Bracket

270211577
1009.1KI.0123-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-3492
Mounting Bracket

270213492
1009.1KI.0247-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-4288
Angle Bracket

270214288
1010FK-2702110: RNCC: 2 | RNVC: 1
1010FK-2702110: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-029-8388
Bow Handle

270298388
713809633: RNCC: 2 | RNVC: 1

29 May 2006

5340-27-057-5734
Mounting Bracket

270575734
M539F291900400: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-058-3135
Mending Plate

270583135
0490 3391: RNCC: 2 | RNVC: 1

8 Jan 2013

5340-27-050-2251
Mending Plate

270502251
03.301.1020: RNCC: 2 | RNVC: 1

8 Jul 2010

5340-27-056-8673
Mending Plate

270568673
202280: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-050-2407
Mounting Bracket

270502407
10091YS7066: RNCC: 2 | RNVC: 1

9 Jul 2010

5340-27-057-6200
Support Hook

270576200
TT0704104: RNCC: 2 | RNVC: 1

13 Sep 2012

5340-27-013-2000
Truss Fairlead

270132000
M5.02.05.12: RNCC: 2 | RNVC: 1

13 May 2002

5340-27-048-8727
Mounting Bracket

270488727
13C25-38403-AA: RNCC: 2 | RNVC: 1

11 Mar 2010

5340-27-006-9226
Mounting Bracket

270069226
96AT 2B618 AA: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-053-9664
Mounting Bracket

270539664
55RS551812: RNCC: 2 | RNVC: 1

12 Jul 2011

5340-27-015-7223
Flush Lock

270157223
10091KI0347: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-040-7317
Mounting Bracket

270407317
1.HIBM-1I-2717: RNCC: 2 | RNVC: 1

11 Mar 2008

5340-27-054-8036
Mending Plate

270548036
202612: RNCC: 2 | RNVC: 2

14 Oct 2011

5340-27-056-4490
Mending Plate

270564490
202886: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-059-6605
Loop Clamp

270596605
901-KL-383: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-022-2695
Expansion Plug

270222695
ERC4998: RNCC: 2 | RNVC: 1
10121YT5624: RNCC: 2 | RNVC: 1

23 Feb 2004

5340-27-022-9102
Access Cover

270229102
4136302043: RNCC: 2 | RNVC: 1

4 May 2004

5340-27-052-9737
Mounting Bracket

270529737
531447-LD: RNCC: 2 | RNVC: 1

11 Mar 2011

5340-27-049-9666
Mending Plate

270499666
191000134: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-058-1850
Mounting Bracket

270581850
502-20-01-0101: RNCC: 2 | RNVC: 1

19 Dec 2012

5340-27-022-1011
Catch Strike

270221011
9BM 5340-00016: RNCC: 2 | RNVC: 1

10 Feb 2004

5340-27-001-2903
Loop Clamp

270012903
204-040-732-001: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-050-9643
Mounting Bracket

270509643
63D-44117-00: RNCC: 2 | RNVC: 2

20 Sep 2010

5340-27-021-1953
Handle Grip

270211953
901-KT-90: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-026-7285
Bail Handle

270267285
PRINC CEKMECE DUGMESI: RNCC: 2 | RNVC: 1
10131MK0047: RNCC: 2 | RNVC: 1
10131MK0047: RNCC: 2 | RNVC: 1

22 Jul 2005

5340-27-033-6373
Mounting Bracket

270336373
40-205-3561: RNCC: 2 | RNVC: 1
40-205-3561: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-017-3621
Mending Plate

270173621
1009.1IS.0044-12: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-022-1876
Catch Strike

270221876
9BM 5340-00026: RNCC: 2 | RNVC: 1

17 Feb 2004

5340-27-053-6875
Mending Plate

270536875
C172-000050: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-27-017-5371
Mounting Bracket

270175371
MP001696: RNCC: 2 | RNVC: 1

11 Jul 2003

5340-27-013-5212
Mending Plate

270135212
8162941.0015: RNCC: 2 | RNVC: 1

25 Jun 2002

5340-27-054-6659
Mounting Bracket

270546659
55RS752998: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-054-4060
Mounting Bracket

270544060
ME704503: RNCC: 2 | RNVC: 1
H349003423: RNCC: 2 | RNVC: 9

7 Sep 2011

5340-27-033-6197
Expansion Shield

270336197
5340DUBE9880002: RNCC: 2 | RNVC: 1

6 Nov 2006

5340-27-024-8007
Mounting Bracket

270248007
155214: RNCC: 2 | RNVC: 1

4 Dec 2004

5340-27-055-2776
Catch Strike

270552776
PVC KAPI KILIDI 111X26.84X7 MM: RNCC: 5 | RNVC: 9

28 Nov 2011

5340-27-049-6886
Mounting Bracket

270496886
4205908: RNCC: 2 | RNVC: 1

20 May 2010

5340-27-006-9398
Mounting Bracket

270069398
95AG A045B28 AB: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-054-2916
Mending Plate

270542916
98019208: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-057-5732
Mounting Bracket

270575732
M539F291900200: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-048-4071
Bow Handle

270484071
300022: RNCC: 3 | RNVC: 2

8 Feb 2010

5340-27-050-0905
Coat And Hat Hook

270500905
ASKI001: RNCC: 2 | RNVC: 1

22 Jun 2010

5340-27-038-2226
Mounting Bracket

270382226
3586115: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-049-4928
Mending Plate

270494928
107521: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-027-2150
Loop Clamp

270272150
W701286S301: RNCC: 2 | RNVC: 1
532A19: RNCC: 2 | RNVC: 1

16 Sep 2005

5340-27-012-8533
Mounting Bracket

270128533
10131YS0920: RNCC: 2 | RNVC: 1

27 Mar 2002

5340-27-016-8192
Mounting Bracket

270168192
8K16494: RNCC: 2 | RNVC: 1

18 Mar 2003

5340-27-021-8009
Block Clamp

270218009
H-39-0531-99: RNCC: 2 | RNVC: 1

30 Jul 2003

5340-27-060-0565
Mounting Bracket

270600565
MM-7490-0345: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-053-9039
Bumper

270539039
H346039001: RNCC: 2 | RNVC: 1

5 Jul 2011

5340-27-041-7291
Mounting Bracket

270417291
2ABEP00694: RNCC: 2 | RNVC: 1

13 Jun 2008

5340-27-011-0699
Mechanical Stop

270110699
7117710248: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-040-2841
Angle Bracket

270402841
Y535-75002-218: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-028-9858
Flush Catch

270289858
72A22-70496-AB: RNCC: 2 | RNVC: 1

21 Feb 2006

5340-27-043-9354
Lock Key

270439354
02026030001: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-041-3650
Utility Access Door

270413650
85X207 CM AL: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-039-3434
Flush Catch

270393434
F-2561-7-2: RNCC: 2 | RNVC: 1

27 Nov 2007

5340-27-022-6906
Mending Plate

270226906
5143 05: RNCC: 2 | RNVC: 1

8 Apr 2004

5340-27-043-4693
Mounting Bracket

270434693
6C1117496AB: RNCC: 2 | RNVC: 1

13 Nov 2008

5340-27-023-4636
Mounting Bracket

270234636
LCC 251: RNCC: 2 | RNVC: 1

2 Jul 2004

5340-27-014-7211
Mounting Bracket

270147211
505021005: RNCC: 2 | RNVC: 1

21 Nov 2002

5340-27-058-9252
Bow Handle

270589252
31C11-57202-AA: RNCC: 2 | RNVC: 1

30 Apr 2013

5340-27-036-9640
Catch Strike

270369640
C70H76: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-058-8137
Loop Clamp

270588137
0114 8610: RNCC: 2 | RNVC: 1

8 Apr 2013

5340-27-055-2013
Butt Hinge

270552013
DA0039172: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-056-8671
Mending Plate

270568671
202278: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-023-3212
Access Cover

270233212
98013604: RNCC: 2 | RNVC: 1

19 Jun 2004

5340-27-021-4510
Mechanical Stop

270214510
3IML-0296: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-2651
Mounting Bracket

270592651
55RS752967: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-050-0487
Bridge Clamp

270500487
280600010N: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-026-7141
Mounting Bracket

270267141
2ABMK 01521: RNCC: 2 | RNVC: 1

22 Jul 2005

5340-27-056-4802
Mending Plate

270564802
202164: RNCC: 2 | RNVC: 2

3 Apr 2012

5340-27-045-9903
Flush Catch

270459903
6K89574: RNCC: 2 | RNVC: 1

26 Jun 2009

5340-27-058-9982
Mending Plate

270589982
04264195: RNCC: 2 | RNVC: 1

14 May 2013

5340-27-027-9542
Mounting Bracket

270279542
6040-4038-0013: RNCC: 2 | RNVC: 1

21 Nov 2005

5340-27-018-6250
Access Cover

270186250
1010FG-0000104: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-017-3641
Mending Plate

270173641
1009.1IS.0068-B/31: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-025-2326
Mounting Bracket

270252326
A321106: RNCC: 2 | RNVC: 1

4 Feb 2005

5340-27-044-7329
Bow Handle

270447329
81.62930-5172: RNCC: 3 | RNVC: 2

9 Mar 2009

5340-27-054-5379
Mortise Lock

270545379
201: RNCC: 5 | RNVC: 2

23 Sep 2011

5340-27-020-6918
Mounting Bracket

270206918
2920DMIR9880002: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-015-2013
Caster Wheel

270152013
10121HT0380: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-053-2198
Mounting Bracket

270532198
H340104101: RNCC: 2 | RNVC: 1

11 Apr 2011

5340-27-038-6262
Mending Plate

270386262
83A18-61820-AA: RNCC: 2 | RNVC: 1

23 Oct 2007

5340-27-001-7690
Loop Clamp

270017690
E-AB-205-153-4 MS21919WDG-9: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-016-9320
Loop Clamp

270169320
20737T: RNCC: 2 | RNVC: 1
51.97440.0132: RNCC: 2 | RNVC: 1
90464-35132-00: RNCC: 2 | RNVC: 1

11 Apr 2003

5340-27-019-1312
Loop Clamp

270191312
8K1-23814-00: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-052-4178
Bridge Clamp

270524178
8810940125: RNCC: 2 | RNVC: 1

20 Jan 2011

5340-27-025-7567
Mounting Bracket

270257567
82610: RNCC: 2 | RNVC: 1

6 Apr 2005

5340-27-056-8662
Mending Plate

270568662
98017243: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-048-1447
Mounting Bracket

270481447
12E02-36276-AA: RNCC: 3 | RNVC: 2

11 Jan 2010

5340-27-006-9524
Mounting Bracket

270069524
P91AG A042K97 AB: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-025-8969
Mounting Bracket

270258969
897065213201: RNCC: 2 | RNVC: 1

28 Apr 2005

5340-27-054-6711
Mounting Bracket

270546711
55RS860161: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-059-6516
Loop Clamp

270596516
901-KL-344: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-038-1632
Bow Handle

270381632
48415-11H00: RNCC: 5 | RNVC: 9

18 Sep 2007

5340-27-059-7037
Loop Clamp

270597037
901-KL-374: RNCC: 2 | RNVC: 1

2 Oct 2013

5340-27-045-0022
Mounting Bracket

270450022
805-5820-645: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-27-020-9498
Mending Plate

270209498
1010FG-0000719: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-034-4926
Catch Strike

270344926
81DBE060K01AE: RNCC: 2 | RNVC: 1

12 Jan 2007

5340-27-005-1598
Control Rod

270051598
1010000681: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-056-3582
Mounting Bracket

270563582
3831717: RNCC: 3 | RNVC: 2
3831717: RNCC: 3 | RNVC: 2

16 Mar 2012

5340-27-024-2132
Butt Hinge

270242132
DEVE BOYNU, TAS MENTESE: RNCC: 2 | RNVC: 1
01133: RNCC: 2 | RNVC: 1
DEVE BOYNU TAM MENTESE: RNCC: 2 | RNVC: 1

1 Oct 2004

5340-27-036-9469
Mending Plate

270369469
C77AK18: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-043-5131
Bumper

270435131
RESIM NO:3194-11: RNCC: 2 | RNVC: 1

17 Nov 2008

5340-27-044-2896
Mending Plate

270442896
81.63731-0358: RNCC: 2 | RNVC: 1

22 Jan 2009

5340-27-047-1750
Mending Plate

270471750
13C00-56157-AB: RNCC: 2 | RNVC: 1

10 Nov 2009

5340-27-011-0539
Access Cover

270110539
4495604846: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-019-3729
Mending Plate

270193729
10121HT0188: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-1930
Mending Plate

270211930
1010FG-0000741: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-7091
Mounting Bracket

270567091
MM-7412-0173: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-053-8035
Mounting Bracket

270538035
C173-430001: RNCC: 3 | RNVC: 2

22 Jun 2011

5340-27-037-8080
Mounting Bracket

270378080
83A11-38041-AA: RNCC: 2 | RNVC: 1

27 Aug 2007

5340-27-032-7743
Mounting Bracket

270327743
JTR-11.04.01: RNCC: 2 | RNVC: 1
JTR-11.04.01: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-053-3804
Mounting Bracket

270533804
H341213000: RNCC: 2 | RNVC: 1

26 Apr 2011

5340-27-032-7108
Mounting Bracket

270327108
13D05-58307-AA: RNCC: 2 | RNVC: 1

12 Sep 2006

5340-27-023-1292
Mounting Bracket

270231292
1010FK-0000355: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-045-7493
Utility Access Door

270457493
GDR-0043: RNCC: 2 | RNVC: 2

10 Jun 2009

5340-27-038-7331
Mounting Bracket

270387331
10091YS1183: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-023-0751
Lock Key

270230751
150130475: RNCC: 2 | RNVC: 1

26 May 2004

5340-27-041-0249
Catch Strike

270410249
MK402055: RNCC: 2 | RNVC: 1

22 Apr 2008

5340-27-025-9922
Mounting Bracket

270259922
1604399100: RNCC: 2 | RNVC: 1

17 May 2005

5340-27-038-2223
Mounting Bracket

270382223
3582791: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-021-0742
Flush Catch

270210742
1009.1KI.0306-11: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-024-8997
Mounting Bracket

270248997
1010FG-1805256: RNCC: 2 | RNVC: 1

15 Dec 2004

5340-27-009-6077
Mounting Bracket

270096077
46522081: RNCC: 2 | RNVC: 1

2 Aug 2001

5340-27-053-7738
Mending Plate

270537738
C161-C00030: RNCC: 3 | RNVC: 2

17 Jun 2011

5340-27-060-0589
Mounting Bracket

270600589
MN-7490-0046: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-022-3249
Expansion Plug

270223249
10121YT5575: RNCC: 2 | RNVC: 1

25 Feb 2004

Load More Results