What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 12 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 12 of 53

5340-27-017-3865
Mounting Bracket

270173865
1009.1IS.0053-7: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-007-1746
Retaining Clip

270071746
91CT296AA: RNCC: 2 | RNVC: 1
E 865830 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-020-5456
Mounting Bracket

270205456
98014035: RNCC: 2 | RNVC: 1

11 Dec 2003

5340-27-018-6931
Mounting Bracket

270186931
1010FK-2810505: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-032-5714
Bridge Clamp

270325714
7335794201: RNCC: 2 | RNVC: 1

10 Aug 2006

5340-27-048-5785
Mending Plate

270485785
HD341227SY: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-018-2467
Mechanical Stop

270182467
27534: RNCC: 2 | RNVC: 1

12 Nov 2003

5340-27-037-0343
Mounting Bracket

270370343
C79F26: RNCC: 2 | RNVC: 1

11 Jul 2007

5340-27-021-9772
Mounting Bracket

270219772
MC-43: RNCC: 2 | RNVC: 1
MC-43: RNCC: 5 | RNVC: 9

16 Jan 2004

5340-27-033-6456
Mounting Bracket

270336456
40-205-3115: RNCC: 2 | RNVC: 1
40-205-3115: RNCC: 2 | RNVC: 1

8 Nov 2006

5340-27-056-7061
Mounting Bracket

270567061
ADOP-SHELTER-180-HUK: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-013-1947
Mounting Bracket

270131947
6009-0532-8002: RNCC: 2 | RNVC: 1
6009-0532-8002: RNCC: 2 | RNVC: 1

13 May 2002

5340-27-032-5760
Mounting Bracket

270325760
40-660-4270: RNCC: 2 | RNVC: 1
40-660-4270: RNCC: 2 | RNVC: 1

11 Aug 2006

5340-27-050-3856
Mending Plate

270503856
105230: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-054-3792
Mending Plate

270543792
98021993: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-056-8647
Mending Plate

270568647
203300: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-007-8758
Retaining Strap

270078758
8658: RNCC: 2 | RNVC: 1
DA0207722: RNCC: 2 | RNVC: 1

10 Apr 2000

5340-27-012-1523
Mending Plate

270121523
10131YS0914: RNCC: 2 | RNVC: 1

16 Jan 2002

5340-27-029-2921
Mending Plate

270292921
81.90801.0350: RNCC: 2 | RNVC: 1

20 Mar 2006

5340-27-037-0347
Mounting Bracket

270370347
C79D85: RNCC: 2 | RNVC: 1

11 Jul 2007

5340-27-046-3079
Mortise Lock

270463079
KANCA DILLI KILIT: RNCC: 2 | RNVC: 1

28 Jul 2009

5340-27-059-6614
Loop Clamp

270596614
901-KL-365: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-040-2852
Angle Bracket

270402852
Y535-76700-202: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-023-8666
Mending Plate

270238666
10.6275.38: RNCC: 2 | RNVC: 1

12 Aug 2004

5340-27-019-2993
Webbing Strap

270192993
10131HK0065: RNCC: 2 | RNVC: 1
71B21-73336-AA: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-019-3728
Caster Wheel

270193728
10121HT0170: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-027-4177
Mending Plate

270274177
81.62690.0057: RNCC: 2 | RNVC: 1

3 Oct 2005

5340-27-004-5141
Access Cover

270045141
10121YK5424: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-039-7878
Mounting Bracket

270397878
1.HIBM-1I-2691: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-034-0921
Mounting Bracket

270340921
621024091070: RNCC: 2 | RNVC: 1

11 Dec 2006

5340-27-018-1836
Rod End Clevis

270181836
7.13.02.01: RNCC: 2 | RNVC: 1

6 Nov 2003

5340-27-051-5609
Mending Plate

270515609
103003: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-27-057-3370
Mounting Bracket

270573370
KI035346: RNCC: 2 | RNVC: 1

20 Jul 2012

5340-27-047-0836
Bumper

270470836
733A02: RNCC: 2 | RNVC: 1
733A02: RNCC: 5 | RNVC: 9

3 Nov 2009

5340-27-057-5542
Mounting Bracket

270575542
M539F328900000: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-012-2275
Eye Hook

270122275
10131YP0199: RNCC: 2 | RNVC: 1

18 Jan 2002

5340-27-060-0226
Crank Handle

270600226
M521D337020000: RNCC: 2 | RNVC: 1

26 Dec 2013

5340-27-032-5814
Loop Clamp

270325814
40-624-0211: RNCC: 2 | RNVC: 1
40-624-0211: RNCC: 2 | RNVC: 1

11 Aug 2006

5340-27-051-5686
Loop Clamp

270515686
15687569: RNCC: 2 | RNVC: 1

8 Nov 2010

5340-27-048-4169
Bow Handle

270484169
300705: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-27-021-4027
Mounting Bracket

270214027
1012.1HSCA.09-19: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-1488
Loop Clamp

270051488
1010000544: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-059-0213
Loop Clamp

270590213
BY0346521: RNCC: 2 | RNVC: 1

16 May 2013

5340-27-009-6466
Mounting Bracket

270096466
5145 15: RNCC: 2 | RNVC: 1

9 Aug 2001

5340-27-048-8743
Mounting Bracket

270488743
13C25-72441-AA: RNCC: 2 | RNVC: 1

11 Mar 2010

5340-27-027-6645
Angle Bracket

270276645
15-01-333-001: RNCC: 2 | RNVC: 1

19 Oct 2005

5340-27-040-2838
Angle Bracket

270402838
Y531-62012-202: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-006-6996
Elbow Catch

270066996
5K10527: RNCC: 2 | RNVC: 1

18 Mar 1999

5340-27-021-0734
Catch Strike

270210734
1009.1KI.0127-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-6556
Mending Plate

270496556
72A12-60331-AA: RNCC: 2 | RNVC: 1

17 May 2010

5340-27-048-5553
Mending Plate

270485553
HD240021Y: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-27-041-9327
Bridge Clamp

270419327
KELEPCE 20MM: RNCC: 2 | RNVC: 1
20MM,TEKLI: RNCC: 2 | RNVC: 1
20MM, PPRC, TEKLI: RNCC: 2 | RNVC: 1
20 LIK PPRC TEKLI KELEPCE: RNCC: 2 | RNVC: 1
DA0035410: RNCC: 2 | RNVC: 1

2 Jul 2008

5340-27-023-5080
Loop Clamp

270235080
05001FK0155: RNCC: 2 | RNVC: 1

8 Jul 2004

5340-27-007-4221
Mounting Bracket

270074221
93 AG F279A33 AA: RNCC: 2 | RNVC: 1

9 Nov 1999

5340-27-037-9500
Expansion Plug

270379500
11065-30000: RNCC: 5 | RNVC: 9

6 Sep 2007

5340-27-043-6065
Door Hook

270436065
0157676: RNCC: 2 | RNVC: 1

26 Nov 2008

5340-27-021-2135
Mounting Bracket

270212135
1012.1HSCA.03-03: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-4980
Mortise Lock

270444980
BAREL 68.LIK: RNCC: 2 | RNVC: 1

11 Feb 2009

5340-27-014-0259
Bow Handle

270140259
388887642001: RNCC: 2 | RNVC: 1

28 Aug 2002

5340-27-023-5485
Loop Clamp

270235485
1010FG-2255412: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-045-5221
Key Holder

270455221
UCGEN ANAHTARLIK: RNCC: 5 | RNVC: 9

13 May 2009

5340-27-058-3837
Access Cover

270583837
37735-03100: RNCC: 5 | RNVC: 9

21 Jan 2013

5340-27-042-7411
Mounting Bracket

270427411
2ABEP00818: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-044-3933
Catch Strike

270443933
12E00-57099-AB: RNCC: 2 | RNVC: 1

2 Feb 2009

5340-27-049-1648
Mounting Bracket

270491648
S01 001 0001 1650 014 F 02.E: RNCC: 2 | RNVC: 1

8 Apr 2010

5340-27-020-3154
Access Cover

270203154
3.06.14.07: RNCC: 2 | RNVC: 1

2 Dec 2003

5340-27-018-6313
Strapping Seal

270186313
1010FG-0306104: RNCC: 2 | RNVC: 1
1010FG-0306104: RNCC: 2 | RNVC: 1
EFE-6313: RNCC: 5 | RNVC: 9

15 Nov 2003

5340-27-017-7862
Catch Strike

270177862
377773134001: RNCC: 2 | RNVC: 1
388882749001: RNCC: 2 | RNVC: 1

3 Sep 2003

5340-27-033-9157
Mounting Bracket

270339157
0000GK0136227: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-018-8955
Mounting Bracket

270188955
11051YK0071: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-017-2050
Bridge Clamp

270172050
53RS200369: RNCC: 2 | RNVC: 1

28 May 2003

5340-27-017-0545
Butt Hinge

270170545
283.01.00003: RNCC: 2 | RNVC: 1

12 May 2003

5340-27-059-1120
Access Cover

270591120
CV71683: RNCC: 2 | RNVC: 1

28 May 2013

5340-27-028-8349
Loop Clamp

270288349
12A14-32062-AA: RNCC: 2 | RNVC: 1

10 Feb 2006

5340-27-050-9653
Mounting Bracket

270509653
548783-01: RNCC: 3 | RNVC: 2
548783-01: RNCC: 3 | RNVC: 2

20 Sep 2010

5340-27-048-9812
Mounting Bracket

270489812
2ABEP01186: RNCC: 2 | RNVC: 1

23 Mar 2010

5340-27-050-9671
Locking Stay

270509671
63D-15774-00: RNCC: 3 | RNVC: 2
63D-15774-00: RNCC: 3 | RNVC: 2

20 Sep 2010

5340-27-003-9181
Angle Bracket

270039181
07001MN0630: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-023-5496
Access Cover

270235496
7521640: RNCC: 2 | RNVC: 1
09180: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-054-6790
Mounting Bracket

270546790
55RS752930: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-042-5980
Mounting Bracket

270425980
2ABEP00826: RNCC: 2 | RNVC: 1

29 Aug 2008

5340-27-024-5474
Loop Clamp

270245474
5183432: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-041-1081
Lever Bracket

270411081
M522D217920000: RNCC: 2 | RNVC: 1

30 Apr 2008

5340-27-013-4038
Catch Strike

270134038
88.96803.4001: RNCC: 2 | RNVC: 1

13 Jun 2002

5340-27-028-4260
Bow Handle

270284260
72B00-61004-AA: RNCC: 2 | RNVC: 1

30 Dec 2005

5340-27-033-7900
Sliding Door Track

270337900
58RS111960: RNCC: 2 | RNVC: 1

17 Nov 2006

5340-27-032-2719
Mounting Bracket

270322719
72A06-73521-AA: RNCC: 2 | RNVC: 1

13 Jun 2006

5340-27-008-9285
Access Door Hinge

270089285
98000732: RNCC: 2 | RNVC: 1

22 Feb 2001

5340-27-042-7399
Handle Grip

270427399
1010006359: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-054-0118
Mounting Bracket

270540118
H233520900: RNCC: 2 | RNVC: 1

15 Jul 2011

5340-27-004-5513
Expansion Plug

270045513
10091YT5035: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-003-9190
Compression Cup

270039190
07001MN0400: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-048-1662
Mounting Bracket

270481662
1.HIBM-1I-2915: RNCC: 2 | RNVC: 1

13 Jan 2010

5340-27-019-5395
Caster Wheel

270195395
07002YT0192: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-006-9172
Mounting Bracket

270069172
91AG A016N03 AC: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-040-3458
Mounting Bracket

270403458
2ABEP00520: RNCC: 2 | RNVC: 1

21 Jan 2008

5340-27-040-4900
Mounting Bracket

270404900
11615498: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-004-7929
Access Cover

270047929
10091YK5094: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-006-9242
Mounting Bracket

270069242
91AG F40162 BA: RNCC: 2 | RNVC: 1

28 Jun 1999

5340-27-038-1398
Control Rod

270381398
853200: RNCC: 2 | RNVC: 1

17 Sep 2007

5340-27-054-1753
Mending Plate

270541753
98021947: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-041-8904
Utility Access Door

270418904
KK 80 250: RNCC: 2 | RNVC: 1

27 Jun 2008

5340-27-040-8650
Mending Plate

270408650
ME507193: RNCC: 2 | RNVC: 1

3 Apr 2008

5340-27-051-1813
Detent Plunger

270511813
103765: RNCC: 3 | RNVC: 2

8 Oct 2010

5340-27-041-1645
Elbow Catch

270411645
2K200569: RNCC: 2 | RNVC: 1

5 May 2008

5340-27-052-7276
Mending Plate

270527276
10046593: RNCC: 2 | RNVC: 1

18 Feb 2011

5340-27-021-2008
Access Cover

270212008
1010FG-1201746: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-1689
Mounting Bracket

270491689
S01 001 0001 1650 014 F 02.J: RNCC: 2 | RNVC: 1

9 Apr 2010

5340-27-005-1695
Access Cover

270051695
1010000760: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-035-8167
Bow Handle

270358167
735417882: RNCC: 2 | RNVC: 1

30 Mar 2007

5340-27-059-4811
Loop Clamp

270594811
VOE952643: RNCC: 3 | RNVC: 2
VOE952643: RNCC: 3 | RNVC: 2

21 Aug 2013

5340-27-013-3919
Catch Strike

270133919
7700576488: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-036-9464
Mending Plate

270369464
C77AK38: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-021-4301
Mounting Bracket

270214301
1012.1HSCA.06-11: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-034-2278
Bridge Clamp

270342278
3/4 KELEPCE: RNCC: 5 | RNVC: 9

18 Dec 2006

5340-27-041-8798
Mounting Bracket

270418798
2-001-002-1: RNCC: 2 | RNVC: 1

27 Jun 2008

5340-27-048-0345
Mounting Bracket

270480345
S-007: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-056-7709
Mending Plate

270567709
SH-TZ-02-010: RNCC: 2 | RNVC: 1

10 May 2012

5340-27-048-1439
Lock-Release Lever

270481439
12E01-55120-AA: RNCC: 3 | RNVC: 2

11 Jan 2010

5340-27-050-0692
Mending Plate

270500692
103567: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-047-2816
Bridge Clamp

270472816
7700083443: RNCC: 2 | RNVC: 1

18 Nov 2009

5340-27-043-0121
Utility Access Door

270430121
40.660.5095: RNCC: 2 | RNVC: 1
40.660.5095: RNCC: 2 | RNVC: 1

24 Sep 2008

5340-27-017-0107
Rod End Clevis

270170107
10131YC0182: RNCC: 2 | RNVC: 1

29 Apr 2003

5340-27-023-8410
Clamping Catch

270238410
6.07.04.07: RNCC: 2 | RNVC: 1

11 Aug 2004

5340-27-041-2762
Mending Plate

270412762
7253256: RNCC: 2 | RNVC: 1

12 May 2008

5340-27-050-5426
Butt Hinge

270505426
5340DA0061164: RNCC: 5 | RNVC: 9

5 Aug 2010

5340-27-051-3316
Mounting Bracket

270513316
898020227301: RNCC: 2 | RNVC: 1

15 Oct 2010

5340-27-057-4375
Bow Handle

270574375
0300719002: RNCC: 2 | RNVC: 1

7 Aug 2012

5340-27-058-7805
Access Cover

270587805
VOE12746565: RNCC: 3 | RNVC: 2

2 Apr 2013

5340-27-020-5451
Mounting Bracket

270205451
98014038: RNCC: 2 | RNVC: 1

11 Dec 2003

5340-27-054-2009
Utility Access Door

270542009
RC90A: RNCC: 5 | RNVC: 9

8 Aug 2011

5340-27-004-5123
Access Cover

270045123
10121YK5454: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-050-0729
Mending Plate

270500729
108269: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-050-6662
Mending Plate

270506662
301AF17: RNCC: 2 | RNVC: 1

16 Aug 2010

5340-27-050-0681
Mending Plate

270500681
103542: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-022-1002
Loop Holder

270221002
1009 1YR 1158-3: RNCC: 2 | RNVC: 1

9 Feb 2004

5340-27-042-1630
Mounting Bracket

270421630
2.HIBM-4L-592/2-6: RNCC: 2 | RNVC: 1

23 Jul 2008

5340-27-059-2857
Access Cover

270592857
98019105-6: RNCC: 2 | RNVC: 1

5 Jul 2013

5340-27-015-0402
Loop Clamp

270150402
7526263: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-007-8699
Angle Bracket

270078699
3522-1140-4200: RNCC: 2 | RNVC: 1
3522-1140-4200: RNCC: 2 | RNVC: 1

5 Apr 2000

5340-27-036-2382
Sliding Door Track

270362382
3C46E51272FC: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-022-8213
Loop Clamp

270228213
7.02.07.03: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-029-7130
Bail Handle

270297130
003413: RNCC: 2 | RNVC: 1

4 May 2006

5340-27-034-9239
Bail Handle

270349239
40-660-7440: RNCC: 2 | RNVC: 1
40-660-7440: RNCC: 2 | RNVC: 1

15 Feb 2007

5340-27-050-0581
Mending Plate

270500581
102856: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-045-5337
Mending Plate

270455337
1305A032: RNCC: 3 | RNVC: 2

14 May 2009

5340-27-021-4315
Mounting Bracket

270214315
1012.1HSCA.02-68: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-9403
Mounting Bracket

270209403
1009.1KI.0123: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-5363
Mending Plate

270485363
HD205520Y: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-27-010-0154
Cover Strip

270100154
DZMA000331: RNCC: 2 | RNVC: 1

22 Oct 2001

5340-27-053-7163
Caster Wheel

270537163
TEKER DUZ 100 MM: RNCC: 5 | RNVC: 9

10 Jun 2011

5340-27-047-9764
Mending Plate

270479764
58RS600586: RNCC: 2 | RNVC: 1

25 Dec 2009

5340-27-044-2082
Mounting Bracket

270442082
12E01-78022-AA: RNCC: 2 | RNVC: 1

15 Jan 2009

5340-27-022-1487
Door Closer Dog

270221487
KMS 0029: RNCC: 2 | RNVC: 1

13 Feb 2004

5340-27-053-4766
Detent Plunger

270534766
C4896404: RNCC: 2 | RNVC: 1

11 May 2011

5340-27-021-6473
Loop Clamp

270216473
200012: RNCC: 2 | RNVC: 1
KELEPCE 3/4: RNCC: 2 | RNVC: 1
KELEPCE 3/4": RNCC: 5 | RNVC: 9

22 Dec 2003

5340-27-051-1091
Mending Plate

270511091
107501: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-041-4052
Utility Access Door

270414052
93X187 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-050-0583
Mending Plate

270500583
102874: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-033-6483
Strap Hinge

270336483
40-205-3682: RNCC: 2 | RNVC: 1
40-205-3682: RNCC: 2 | RNVC: 1

8 Nov 2006

5340-27-038-4046
Loop Clamp

270384046
5940-00404-00007: RNCC: 2 | RNVC: 1

5 Oct 2007

5340-27-025-3776
Mounting Bracket

270253776
1.HIBM-1I-2230: RNCC: 2 | RNVC: 1

8 Mar 2005

5340-27-020-3149
Access Cover

270203149
3.06.14.06: RNCC: 2 | RNVC: 1

2 Dec 2003

5340-27-033-6409
Mounting Bracket

270336409
40-205-3900: RNCC: 2 | RNVC: 1
40-205-3900: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-053-4734
Mending Plate

270534734
6040-2337-3004: RNCC: 2 | RNVC: 2

10 May 2011

5340-27-027-5211
Angle Bracket

270275211
6040-0529-1075: RNCC: 2 | RNVC: 1

10 Oct 2005

5340-27-051-2803
Bridge Clamp

270512803
F10/10050: RNCC: 2 | RNVC: 1

13 Oct 2010

5340-27-010-0917
Coat And Hat Hook

270100917
81.63710.0018: RNCC: 2 | RNVC: 1

1 Nov 2001

5340-27-054-5384
Utility Access Door

270545384
93X213 MM KAPI: RNCC: 5 | RNVC: 9

23 Sep 2011

5340-27-048-9654
Mending Plate

270489654
103695: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-013-3920
Bow Handle

270133920
7700750044: RNCC: 2 | RNVC: 1
7700750044: RNCC: 2 | RNVC: 1

12 Jun 2002

5340-27-008-5052
Angle Bracket

270085052
599903128113: RNCC: 2 | RNVC: 1

20 Oct 2000

5340-27-036-0003
Mounting Bracket

270360003
13D05-33052-AA: RNCC: 2 | RNVC: 1

18 Apr 2007

5340-27-028-7896
Mending Plate

270287896
35004264: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-036-9456
Mending Plate

270369456
C01AN59: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-020-0036
Mounting Bracket

270200036
00318900: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-021-4011
Mounting Bracket

270214011
1012.1HSCA.02-25: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-032-9633
Mounting Bracket

270329633
2ABM1AMB0042/2: RNCC: 2 | RNVC: 1

3 Oct 2006

5340-27-046-6798
Access Cover

270466798
Y532-67500-000: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-038-2327
Loop Clamp

270382327
83A11-16578-AA: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-041-4031
Utility Access Door

270414031
80X193 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-046-4041
Door Closer

270464041
KD-002/50-330: RNCC: 5 | RNVC: 9
KD-002/50-330: RNCC: 5 | RNVC: 9
KAPI HIDROLIGI: RNCC: 5 | RNVC: 9

5 Aug 2009

5340-27-023-2297
Access Cover

270232297
28078: RNCC: 2 | RNVC: 1

9 Jun 2004

5340-27-047-6962
Mounting Bracket

270476962
16C05-56248-AA: RNCC: 2 | RNVC: 1

14 Dec 2009

5340-27-049-4780
Mending Plate

270494780
105369: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-049-9664
Mending Plate

270499664
HD212161S: RNCC: 2 | RNVC: 2
HD212161S: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-057-3930
Mending Plate

270573930
030022020000: RNCC: 2 | RNVC: 1

30 Jul 2012

5340-27-034-8926
Mounting Bracket

270348926
7633004: RNCC: 2 | RNVC: 1

14 Feb 2007

5340-27-009-5571
Support Hook

270095571
30X7 MM: RNCC: 2 | RNVC: 1

25 Jul 2001

5340-27-056-3178
Access Cover

270563178
3835024: RNCC: 3 | RNVC: 2

14 Mar 2012

5340-27-023-2214
Flush Catch

270232214
26953T: RNCC: 2 | RNVC: 1

8 Jun 2004

5340-27-036-2383
Sliding Door Track

270362383
3C46E51269AC: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-021-4268
Flush Catch

270214268
P9903501: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-6476
Butt Hinge

270506476
MENTESE, 150X50MM: RNCC: 2 | RNVC: 1

12 Aug 2010

5340-27-053-0269
Loop Clamp

270530269
10131MK0516: RNCC: 2 | RNVC: 1

18 Mar 2011

5340-27-053-3029
Mounting Bracket

270533029
740.06.10-02.048: RNCC: 3 | RNVC: 2

18 Apr 2011

5340-27-008-9310
Strap End Clip

270089310
98000304: RNCC: 2 | RNVC: 1

23 Feb 2001

5340-27-025-1725
Mounting Bracket

270251725
10084359: RNCC: 2 | RNVC: 1

24 Jan 2005

5340-27-008-3162
Rod Retainer Clip

270083162
14187480: RNCC: 2 | RNVC: 1
14187480: RNCC: 2 | RNVC: 1

14 Sep 2000

5340-27-043-6431
Mounting Bracket

270436431
YS 01 03 02: RNCC: 3 | RNVC: 2

27 Nov 2008

5340-27-001-8053
Loop Clamp

270018053
TM55-1520-210-3MS21919WDG7: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-051-6597
Catch Strike

270516597
16F10-12198-AA: RNCC: 2 | RNVC: 1

12 Nov 2010

5340-27-017-3657
Mending Plate

270173657
1009.1IS.0087-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-050-8568
Mounting Bracket

270508568
10046424: RNCC: 2 | RNVC: 1

3 Sep 2010

5340-27-008-2450
Mounting Bracket

270082450
98005150: RNCC: 2 | RNVC: 1

24 Aug 2000

5340-27-017-7610
Exhaust Muffler

270177610
388887570101: RNCC: 2 | RNVC: 1

28 Aug 2003

5340-27-033-6324
Rod Retainer Clip

270336324
07002YA0351: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-040-5298
Angle Bracket

270405298
130-1-220: RNCC: 2 | RNVC: 1

28 Jan 2008

5340-27-021-4105
Mounting Bracket

270214105
1009.1KI.0264-1*1-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-036-2747
Mending Plate

270362747
1B15001: RNCC: 2 | RNVC: 1

21 May 2007

5340-27-018-6566
Mounting Bracket

270186566
1010FG-1206822: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-7508
Mounting Bracket

270587508
VOE12745973: RNCC: 3 | RNVC: 2

28 Mar 2013

5340-27-029-8384
Catch Strike

270298384
46747437: RNCC: 2 | RNVC: 1

29 May 2006

5340-27-046-3943
Catch Strike

270463943
MUC8526-LD: RNCC: 2 | RNVC: 1

4 Aug 2009

5340-27-015-8951
Butt Hinge

270158951
99999-NIIN-DA0019953: RNCC: 2 | RNVC: 1
70 MM: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-056-4421
Mending Plate

270564421
98000557-1: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-059-5163
Catch Strike

270595163
13C54-55340-AA: RNCC: 2 | RNVC: 1

29 Aug 2013

5340-27-035-9207
Plug Button

270359207
46423672: RNCC: 2 | RNVC: 1

10 Apr 2007

5340-27-005-1713
Access Cover

270051713
1010001830: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-054-3648
Mending Plate

270543648
98021563: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-048-9670
Mending Plate

270489670
103717: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-050-0587
Mending Plate

270500587
103501: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-051-4158
Mending Plate

270514158
109331: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-053-8435
Flush Catch

270538435
C171-000030: RNCC: 2 | RNVC: 2

28 Jun 2011

5340-27-039-8094
Loop Holder

270398094
70X100CM: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-010-2794
Angle Bracket

270102794
10131YB0750: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-053-9222
Mending Plate

270539222
109866: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-049-1441
Mounting Bracket

270491441
5340KK0201429: RNCC: 2 | RNVC: 1

7 Apr 2010

5340-27-057-0090
Bow Handle

270570090
202853: RNCC: 2 | RNVC: 1

7 Jun 2012

5340-27-017-9257
Lock Bolt

270179257
6030-0532-8060: RNCC: 2 | RNVC: 1

9 Oct 2003

5340-27-008-1682
Handle Grip

270081682
27736: RNCC: 2 | RNVC: 1

28 Jul 2000

5340-27-003-9202
Mortise Lock

270039202
07001MN0648: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-044-8138
Stand Base

270448138
BA4-2150-020000: RNCC: 5 | RNVC: 9

16 Mar 2009

5340-27-058-5420
Access Cover

270585420
920-8047/02: RNCC: 2 | RNVC: 1

19 Feb 2013

5340-27-017-3683
Support Hook

270173683
1009.1IS.0071-C5: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-058-3692
Mending Plate

270583692
CV71969: RNCC: 2 | RNVC: 1

17 Jan 2013

5340-27-025-1458
Door Closer Dog

270251458
205-030-491-5: RNCC: 2 | RNVC: 1

14 Jan 2005

5340-27-058-0637
Caster Wheel

270580637
KK0120796: RNCC: 5 | RNVC: 9

5 Dec 2012

5340-27-007-1140
Webbing Strap

270071140
25X2MM: RNCC: 2 | RNVC: 1

13 Aug 1999

5340-27-051-4201
Bow Handle

270514201
102993: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-019-9462
Angle Bracket

270199462
ASR1116-L: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-012-1799
Angle Bracket

270121799
10131YS0780: RNCC: 2 | RNVC: 1

17 Jan 2002

5340-27-032-6489
T Bracket

270326489
40-660-7655: RNCC: 2 | RNVC: 1
40-660-7655: RNCC: 2 | RNVC: 1

29 Aug 2006

5340-27-055-6883
Mounting Bracket

270556883
4K231959: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-036-1432
Mounting Bracket

270361432
2ABEP00200: RNCC: 2 | RNVC: 1

3 May 2007

5340-27-048-9621
Mending Plate

270489621
103650: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-055-3577
Mending Plate

270553577
82825426: RNCC: 2 | RNVC: 2
82825426: RNCC: 5 | RNVC: 9

1 Dec 2011

5340-27-035-8612
Mounting Bracket

270358612
3589187: RNCC: 2 | RNVC: 1

4 Apr 2007

5340-27-043-6066
Flush Lock

270436066
0157751: RNCC: 2 | RNVC: 1

26 Nov 2008

5340-27-038-8609
Mounting Bracket

270388609
2ABEP00268: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-050-0689
Mending Plate

270500689
103558: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-048-7245
Loop Clamp

270487245
7291-10: RNCC: 2 | RNVC: 1
7291-10: RNCC: 5 | RNVC: 9

23 Feb 2010

5340-27-038-7275
Rim Latch

270387275
10091YL0927: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-028-8370
Mounting Bracket

270288370
MB316799: RNCC: 2 | RNVC: 1

10 Feb 2006

5340-27-005-1497
Loop Clamp

270051497
1010000961: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-050-1573
Mending Plate

270501573
108059: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-024-0316
Mounting Bracket

270240316
10131YB0674: RNCC: 2 | RNVC: 1

9 Sep 2004

5340-27-057-7796
Mounting Bracket

270577796
1010FMA-1202707: RNCC: 2 | RNVC: 1

19 Oct 2012

5340-27-058-0383
Mending Plate

270580383
CV72062: RNCC: 2 | RNVC: 1

4 Dec 2012

5340-27-038-1914
Mounting Bracket

270381914
897076689051: RNCC: 2 | RNVC: 1

20 Sep 2007

5340-27-007-1697
Retaining Clip

270071697
E 860389 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-005-7334
Clamping Catch

270057334
14-940-000-0003: RNCC: 3 | RNVC: 2

20 Jan 1998

5340-27-032-8572
Catch Strike

270328572
86VBV 4336 BE: RNCC: 2 | RNVC: 1

25 Sep 2006

5340-27-038-3410
Butt Hinge

270383410
150210938: RNCC: 2 | RNVC: 1

1 Oct 2007

5340-27-040-4680
Mounting Bracket

270404680
10870041: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-045-2709
Mending Plate

270452709
8251A022: RNCC: 3 | RNVC: 2

21 Apr 2009

5340-27-039-6266
Mounting Bracket

270396266
YTE.190.EM.002.019: RNCC: 2 | RNVC: 1

11 Dec 2007

5340-27-044-1569
Angle Bracket

270441569
AMJP24DC10: RNCC: 2 | RNVC: 1

13 Jan 2009

5340-27-044-9188
Catch Strike

270449188
51750280: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-27-038-1763
Mounting Bracket

270381763
1010FK-2702044-1: RNCC: 2 | RNVC: 1

19 Sep 2007

5340-27-052-6502
Utility Access Door

270526502
SEKSIYONEL KAPI 380X280 CM: RNCC: 2 | RNVC: 1

14 Feb 2011

5340-27-009-9350
Access Cover

270099350
98012497: RNCC: 2 | RNVC: 1

19 Jun 2004

5340-27-054-0525
Bow Handle

270540525
98017835: RNCC: 3 | RNVC: 2

19 Jul 2011

5340-27-006-9518
Mounting Bracket

270069518
92GG 9K150 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-018-8618
Mounting Bracket

270188618
11051YC0133: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-006-9421
Mounting Bracket

270069421
P95AG A02691 AA: RNCC: 2 | RNVC: 1

11 Jan 2002

5340-27-054-6026
Mounting Bracket

270546026
55RS752947: RNCC: 3 | RNVC: 2

30 Sep 2011

5340-27-003-9875
Access Cover

270039875
10121YK5002: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-056-3346
Access Cover

270563346
3831621: RNCC: 3 | RNVC: 2

15 Mar 2012

5340-27-004-7963
Access Cover

270047963
10091YK5138: RNCC: 3 | RNVC: 2

6 Nov 1996

5340-27-052-2497
Catch Strike

270522497
13G02-57082-AA: RNCC: 3 | RNVC: 2

29 Dec 2010

5340-27-020-9497
Mending Plate

270209497
1010FG-0000716: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-047-9352
Bow Handle

270479352
190-123: RNCC: 3 | RNVC: 2

24 Dec 2009

5340-27-006-2602
Positive Lock Stud

270062602
ASMA-30: RNCC: 3 | RNVC: 2

11 Mar 1999

5340-27-053-8485
Mounting Bracket

270538485
H343604700: RNCC: 2 | RNVC: 1

28 Jun 2011

5340-27-035-5040
Mounting Bracket

270355040
2ABEP00128: RNCC: 2 | RNVC: 1

15 Mar 2007

5340-27-056-7872
Catch Strike

270567872
2T14V44162AG: RNCC: 2 | RNVC: 1

11 May 2012

5340-27-021-9742
Mending Plate

270219742
1009 1KI 0274-1/2: RNCC: 2 | RNVC: 1

16 Jan 2004

5340-27-059-6520
Loop Clamp

270596520
901-KL-350: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-053-9976
Mending Plate

270539976
98019856-2: RNCC: 2 | RNVC: 2

14 Jul 2011

5340-27-020-9485
Mending Plate

270209485
1010FG-0000431: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-038-2490
Mounting Bracket

270382490
1010FK-2702004: RNCC: 2 | RNVC: 1

24 Sep 2007

5340-27-008-3307
Access Cover

270083307
98005960: RNCC: 2 | RNVC: 1

19 Sep 2000

5340-27-021-0340
Mounting Bracket

270210340
1009.1KI.0353-7: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-041-9456
Mounting Bracket

270419456
2-002-012: RNCC: 1 | RNVC: 2

2 Jul 2008

5340-27-056-4410
Mending Plate

270564410
12349918-2: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-047-0260
Mending Plate

270470260
73A04-57468-AA: RNCC: 2 | RNVC: 1

27 Oct 2009

5340-27-027-8255
Mending Plate

270278255
72B13-50144-AA: RNCC: 2 | RNVC: 1

9 Nov 2005

5340-27-015-0436
Loop Clamp

270150436
7992089: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-021-1905
Mounting Bracket

270211905
1012.1HSCA.03-77: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-7558
Expansion Plug

270287558
57RS301006: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-051-4103
Mending Plate

270514103
105804: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-053-9043
Catch Strike

270539043
H346037400: RNCC: 2 | RNVC: 1

5 Jul 2011

5340-27-024-4795
Mounting Bracket

270244795
05001FT0106: RNCC: 2 | RNVC: 1
5009367095: RNCC: 2 | RNVC: 1

3 Nov 2004

5340-27-021-2123
Mounting Bracket

270212123
1012.1HSCA.02-35: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-1007
Mounting Bracket

270531007
2.HIBM-4H-0666/1-A5: RNCC: 2 | RNVC: 1

28 Mar 2011

5340-27-053-8574
Access Cover

270538574
AK-70900: RNCC: 2 | RNVC: 2

29 Jun 2011

5340-27-059-2856
Access Cover

270592856
98019105-33: RNCC: 2 | RNVC: 1

5 Jul 2013

5340-27-059-6815
Loop Clamp

270596815
901-KL-396: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-034-5032
Mounting Bracket

270345032
FCTE2042AA: RNCC: 2 | RNVC: 1

12 Jan 2007

5340-27-044-9146
Mounting Bracket

270449146
02008-TRS-10-0000-03: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-27-032-6167
Angle Bracket

270326167
40-685-2125: RNCC: 2 | RNVC: 1
40-685-2125: RNCC: 2 | RNVC: 1

23 Aug 2006

5340-27-006-8310
Access Cover

270068310
6015-0117-5001: RNCC: 2 | RNVC: 1
6015-0117-5001: RNCC: 2 | RNVC: 1

20 May 1999

5340-27-046-4549
Mounting Bracket

270464549
1.HIBM-1Q-981: RNCC: 2 | RNVC: 1

12 Aug 2009

5340-27-035-3261
Mounting Bracket

270353261
92CT5T556AA: RNCC: 2 | RNVC: 1

8 Mar 2007

5340-27-036-5852
Mounting Bracket

270365852
C70K04: RNCC: 2 | RNVC: 1

14 Jun 2007

5340-27-051-3193
Access Cover

270513193
SAP-A6-01-05: RNCC: 3 | RNVC: 2

15 Oct 2010

5340-27-005-4535
Rod End Clevis

270054535
37H-6437: RNCC: 3 | RNVC: 2

3 Dec 1997

5340-27-001-2980
Loop Clamp

270012980
205-030-702-041: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-026-1708
Strap End Clip

270261708
332A23-0150-3701: RNCC: 2 | RNVC: 1

14 Jun 2005

5340-27-023-3950
Mounting Bracket

270233950
4.04.02.04: RNCC: 2 | RNVC: 1
1934071106: RNCC: 2 | RNVC: 1

25 Jun 2004

5340-27-022-8222
Loop Clamp

270228222
7.14.01.15: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-056-8651
Mending Plate

270568651
98001162-4: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-057-0958
Utility Access Door

270570958
SC-288: RNCC: 2 | RNVC: 1

19 Jun 2012

5340-27-032-2859
Catch Strike

270322859
71B22-55506-AA: RNCC: 2 | RNVC: 1

14 Jun 2006

5340-27-055-3234
Mounting Bracket

270553234
1692-0058: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-27-024-0778
Webbing Strap

270240778
GS.2500: RNCC: 2 | RNVC: 1

14 Sep 2004

5340-27-020-6336
Mounting Bracket

270206336
1009.1KI.0252-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-3879
Mending Plate

270503879
107079: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-040-2805
Bow Handle

270402805
8200449528: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-017-3876
Mounting Bracket

270173876
1009.1IS.0058-30: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-058-2847
Access Cover

270582847
107061-000: RNCC: 2 | RNVC: 2

3 Jan 2013

5340-27-040-6198
Mounting Bracket

270406198
897301527051: RNCC: 2 | RNVC: 1

4 Feb 2008

5340-27-051-1140
Bow Handle

270511140
103798: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-050-3864
Mending Plate

270503864
105284: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-005-1501
Loop Clamp

270051501
1010000970: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-007-4651
Door Closer

270074651
KAPI HIDROLIGI: RNCC: 2 | RNVC: 1
KAPI KAPATICI: RNCC: 5 | RNVC: 9

26 Nov 1999

5340-27-017-0103
Rod End Clevis

270170103
10131YCS0127: RNCC: 2 | RNVC: 1

29 Apr 2003

5340-27-050-0721
Mending Plate

270500721
108211: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-018-7140
Mounting Bracket

270187140
1010FK-3506163: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-6553
Mounting Bracket

270186553
1010FG-1201768: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-9119
Butt Hinge

270589119
31C15-57042-AA: RNCC: 2 | RNVC: 1

29 Apr 2013

5340-27-051-0730
Expansion Shield

270510730
13X85MM,CELIK: RNCC: 2 | RNVC: 1

29 Sep 2010

5340-27-042-5635
Mending Plate

270425635
3284907: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-013-6710
Escutcheon Plate

270136710
AYNA 242MM: RNCC: 2 | RNVC: 1
DOG.OK:ROZET-SATEN: RNCC: 2 | RNVC: 1
KUMRU 2049.Y: RNCC: 2 | RNVC: 1
AYNA,242MM: RNCC: 5 | RNVC: 2

15 Jul 2002

5340-27-001-7316
Loop Clamp

270017316
E-AB-205-153-4 MS21919WDG-15: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-006-8222
Mounting Bracket

270068222
ESR0282-L: RNCC: 2 | RNVC: 1

17 May 1999

5340-27-036-1429
Swivel Caster

270361429
2ABEP00158: RNCC: 2 | RNVC: 1

3 May 2007

5340-27-057-0028
Mending Plate

270570028
203634: RNCC: 2 | RNVC: 1

7 Jun 2012

5340-27-020-2036
Mounting Bracket

270202036
7700648868: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-011-2438
Butt Hinge

270112438
07002YM0300: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-032-4685
Mounting Bracket

270324685
1005002198113: RNCC: 2 | RNVC: 1

19 Jul 2006

5340-27-045-7104
Mounting Bracket

270457104
KVO.5836.00.019: RNCC: 3 | RNVC: 2

5 Jun 2009

5340-27-040-4516
Mounting Bracket

270404516
7738042: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-027-6288
Mending Plate

270276288
72B13-36651-AA: RNCC: 2 | RNVC: 1

14 Oct 2005

5340-27-043-9307
Lock Key

270439307
02026030004-1: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-021-0360
Mounting Bracket

270210360
1009.1KI.0352-1: RNCC: 2 | RNVC: 1
1009.1KI.0353-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-8839
Loop Holder

270218839
1009 1KI 0268-3: RNCC: 2 | RNVC: 1

9 Jan 2004

5340-27-007-1731
Retaining Clip

270071731
E 865422 S81: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-038-7428
Mounting Bracket

270387428
8763322: RNCC: 2 | RNVC: 1

30 Oct 2007

5340-27-038-2513
Mending Plate

270382513
17991-6K000: RNCC: 5 | RNVC: 9

24 Sep 2007

5340-27-057-7641
Mending Plate

270577641
AR536T223120000: RNCC: 2 | RNVC: 1

15 Oct 2012

5340-27-016-6273
Mounting Bracket

270166273
98012840: RNCC: 2 | RNVC: 1

19 Feb 2003

5340-27-024-3151
Handle Grip

270243151
58RS104583: RNCC: 2 | RNVC: 1

12 Oct 2004

5340-27-059-2716
Mounting Bracket

270592716
55RS752619: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-051-4220
Utility Access Door

270514220
ARES, HANGAR: RNCC: 2 | RNVC: 1

25 Oct 2010

5340-27-007-4324
Mounting Bracket

270074324
92AB 5A242 BD: RNCC: 2 | RNVC: 1

10 Nov 1999

5340-27-027-5282
Mending Plate

270275282
85.41740.0002: RNCC: 2 | RNVC: 1

10 Oct 2005

5340-27-035-0645
Mending Plate

270350645
83619425501: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-054-1740
Mending Plate

270541740
40-042.00/10-127-2008: RNCC: 2 | RNVC: 1

4 Aug 2011

5340-27-037-3886
Handle Grip

270373886
83A00-57475-AB: RNCC: 2 | RNVC: 1

26 Jul 2007

5340-27-021-0538
Mending Plate

270210538
1010FG-0000312: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-5796
Mounting Bracket

270545796
C70AA10: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-023-2132
Mechanical Stop

270232132
1010FK-1911340: RNCC: 2 | RNVC: 1

5 Jun 2004

5340-27-054-3116
Mending Plate

270543116
98022337: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-017-0006
Mounting Bracket

270170006
98003189: RNCC: 2 | RNVC: 1

28 Apr 2003

5340-27-049-5007
Mending Plate

270495007
108052: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-021-2371
Butt Hinge

270212371
10131MM0057: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-9616
Mending Plate

270489616
103642: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-058-7205
Mending Plate

270587205
BLS0000060015: RNCC: 5 | RNVC: 9

20 Mar 2013

5340-27-059-2436
Caster Wheel

270592436
HS 022: RNCC: 5 | RNVC: 9

26 Jun 2013

5340-27-044-3818
Mounting Bracket

270443818
10091KI0220-12: RNCC: 2 | RNVC: 1

2 Feb 2009

5340-27-057-9910
Mounting Bracket

270579910
38562-663-920: RNCC: 2 | RNVC: 1

27 Nov 2012

5340-27-037-2521
Mending Plate

270372521
387000960001: RNCC: 2 | RNVC: 1

19 Jul 2007

5340-27-014-3456
Butt Hinge

270143456
8K93225: RNCC: 2 | RNVC: 1

8 Oct 2002

5340-27-040-7632
Caster Wheel

270407632
100X350MM: RNCC: 2 | RNVC: 1

14 Mar 2008

5340-27-036-2354
Mounting Bracket

270362354
38739200M: RNCC: 2 | RNVC: 1
38739200M: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-018-6869
Mechanical Stop

270186869
1010FK-2710837: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-028-3466
Butt Hinge

270283466
6X10 CM, KROM: RNCC: 2 | RNVC: 1

25 Dec 2005

5340-27-053-9157
Mending Plate

270539157
98019107: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-27-033-6482
Strap Hinge Leaf

270336482
40-205-3681: RNCC: 2 | RNVC: 1
40-205-3681: RNCC: 2 | RNVC: 1

8 Nov 2006

5340-27-027-9833
Handle Grip

270279833
M52T3011R450170: RNCC: 2 | RNVC: 1

23 Nov 2005

5340-27-006-9248
Mounting Bracket

270069248
92AG B61216 AB: RNCC: 2 | RNVC: 1

28 Jun 1999

5340-27-000-1706
Snap Hook

270001706
G3, UST GERDANE: RNCC: 2 | RNVC: 1
M4-722: RNCC: 3 | RNVC: 2

2 Jun 1977

5340-27-021-1492
Escutcheon Plate

270211492
10131MA0173: RNCC: 2 | RNVC: 1
AYNA: RNCC: 2 | RNVC: 1
AYNA-220MM: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-041-4155
Utility Access Door

270414155
148X143 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-049-4905
Tee Hinge

270494905
108153: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-017-3627
Mending Plate

270173627
1009.1IS.0058-18C: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-057-9513
Mounting Bracket

270579513
31235-ZY3-003: RNCC: 2 | RNVC: 1

21 Nov 2012

5340-27-007-2008
Access Cover

270072008
W 701021 S300: RNCC: 2 | RNVC: 1

22 Sep 1999

5340-27-011-0213
Loop Clamp

270110213
73 3571 3544: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-042-1942
Angle Bracket

270421942
2.HIBM-4L-592/2-22: RNCC: 2 | RNVC: 1

25 Jul 2008

5340-27-006-9399
Mounting Bracket

270069399
95AG A10460 AB: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-009-5830
Bridge Clamp

270095830
81.97401.0857: RNCC: 2 | RNVC: 1

30 Jul 2001

5340-27-033-9005
Loop Clamp

270339005
377775228001: RNCC: 2 | RNVC: 1

28 Nov 2006

5340-27-006-8887
Mounting Bracket

270068887
A 436 540 74 73: RNCC: 2 | RNVC: 1

11 Jun 1999

5340-27-041-1398
Mounting Bracket

270411398
G18GMP125: RNCC: 2 | RNVC: 1

1 May 2008

5340-27-058-4417
Angle Bracket

270584417
M535E661120100: RNCC: 2 | RNVC: 1

31 Jan 2013

5340-27-051-4120
Mending Plate

270514120
108028: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-021-2551
Mounting Bracket

270212551
645966: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-6495
Mounting Bracket

270286495
MB015498: RNCC: 2 | RNVC: 1

26 Jan 2006

5340-27-005-1791
Plug Button

270051791
1010002322: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-056-3754
Access Cover

270563754
3835011: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-27-027-1034
Expansion Plug

270271034
MB393232: RNCC: 2 | RNVC: 1

2 Sep 2005

5340-27-059-5164
Catch Strike

270595164
13C54-55350-AA: RNCC: 2 | RNVC: 1

29 Aug 2013

5340-27-020-5482
Mounting Bracket

270205482
897198912051: RNCC: 2 | RNVC: 1

11 Dec 2003

5340-27-005-1571
Loop Clamp

270051571
1010001985: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-006-9207
Mounting Bracket

270069207
91AG A106A58 AA: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-022-4956
Rod End Clevis

270224956
317490R1: RNCC: 2 | RNVC: 1

16 Mar 2004

5340-27-026-1792
Mending Plate

270261792
2010.6275.038: RNCC: 2 | RNVC: 1

14 Jun 2005

5340-27-057-4244
Mending Plate

270574244
030013180300: RNCC: 2 | RNVC: 1

6 Aug 2012

5340-27-007-3972
Mounting Bracket

270073972
95AG A02524 AB: RNCC: 2 | RNVC: 1

3 Nov 1999

5340-27-010-2551
Angle Bracket

270102551
10131YS0790: RNCC: 2 | RNVC: 1

20 Nov 2001

5340-27-019-7699
Bridge Clamp

270197699
SFA06220: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-3579
Expansion Plug

270583579
CV60348: RNCC: 2 | RNVC: 1

16 Jan 2013

5340-27-043-0120
Bow Handle

270430120
40.660.5077: RNCC: 2 | RNVC: 1
40.660.5077: RNCC: 2 | RNVC: 1

24 Sep 2008

5340-27-022-5989
Catch Strike

270225989
10131YK2021: RNCC: 2 | RNVC: 1

26 Mar 2004

5340-27-042-6703
Mounting Bracket

270426703
73A04-36660-AA: RNCC: 2 | RNVC: 1

4 Sep 2008

5340-27-005-3368
Access Door Hinge

270053368
97K5A4027: RNCC: 2 | RNVC: 1

29 Jul 1997

5340-27-041-4043
Utility Access Door

270414043
87X188 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-041-3048
Mounting Bracket

270413048
7335711967: RNCC: 2 | RNVC: 1

13 May 2008

5340-27-023-4467
Access Cover

270234467
98013975: RNCC: 2 | RNVC: 1

1 Jul 2004

5340-27-048-2260
Bow Handle

270482260
58RS600495: RNCC: 2 | RNVC: 1

21 Jan 2010

5340-27-046-6822
Mounting Bracket

270466822
2ABEP01151: RNCC: 2 | RNVC: 1

28 Sep 2009

5340-27-049-8490
Mending Plate

270498490
108606: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-007-9005
Mounting Bracket

270079005
10131YB0655: RNCC: 2 | RNVC: 1

17 Apr 2000

5340-27-018-2200
Detent Plunger

270182200
27350: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-048-7680
Corner Brace

270487680
9034-85: RNCC: 2 | RNVC: 1
9034-85: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-029-2728
Mending Plate

270292728
1010FG-0608221: RNCC: 2 | RNVC: 1

17 Mar 2006

5340-27-006-9514
Angle Bracket

270069514
94AT A112K77 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-036-7917
Catch Strike

270367917
KILIT ASKISI: RNCC: 2 | RNVC: 1

28 Jun 2007

5340-27-021-4165
Angle Bracket

270214165
1010FG-1801071: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-006-9483
Mounting Bracket

270069483
P92AG A10202 AA: RNCC: 2 | RNVC: 1

30 Jun 1999

5340-27-015-8176
Snap Hook

270158176
831527HL0000235: RNCC: 2 | RNVC: 1

14 May 2002

5340-27-059-6267
Loop Clamp

270596267
VOE952626: RNCC: 3 | RNVC: 2
VOE952626: RNCC: 3 | RNVC: 2

18 Sep 2013

5340-27-010-1235
Mounting Bracket

270101235
98003016: RNCC: 2 | RNVC: 1

6 Nov 2001

5340-27-038-2166
Access Cover

270382166
3582847: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-006-9136
Mounting Bracket

270069136
95AT 13K061 AA: RNCC: 2 | RNVC: 1

24 Jun 1999

5340-27-004-7984
Access Cover

270047984
10091YK5155: RNCC: 3 | RNVC: 2

6 Nov 1996

5340-27-039-8077
Loop Holder

270398077
A-4 EBAT: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-045-6541
Hand Crank

270456541
ANT-YV121UP: RNCC: 2 | RNVC: 1

27 May 2009

5340-27-056-7517
Expansion Plug

270567517
W701441S300: RNCC: 2 | RNVC: 1

8 May 2012

5340-27-034-7584
Mounting Bracket

270347584
ATOKHAMILMG3: RNCC: 2 | RNVC: 1

7 Feb 2007

5340-27-020-1790
Bridge Clamp

270201790
7700778349: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-037-7032
Bail Handle

270377032
49521107: RNCC: 2 | RNVC: 1

21 Aug 2007

5340-27-051-4116
Mending Plate

270514116
108024: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-022-1785
Mounting Bracket

270221785
MP001753: RNCC: 2 | RNVC: 1

13 Feb 2004

5340-27-015-0712
Rod End Clevis

270150712
7335793696: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-021-4556
Mortise Lock Set

270214556
07002YK0311: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-5844
Loop Clamp

270175844
53RS600082: RNCC: 2 | RNVC: 1

30 Jul 2003

5340-27-051-6541
Butt Hinge

270516541
337B94: RNCC: 5 | RNVC: 9

11 Nov 2010

5340-27-021-3485
Mounting Bracket

270213485
1009.1KI.0306-12: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-1089
Mending Plate

270511089
107054: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-024-9459
Compression Cup

270249459
KP19-K: RNCC: 2 | RNVC: 1
R2 KP19-K: RNCC: 5 | RNVC: 9

18 Dec 2004

5340-27-043-9381
Lock Key

270439381
02026030016: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-041-4335
Mending Plate

270414335
7173085: RNCC: 2 | RNVC: 1

23 May 2008

5340-27-005-1516
Retaining Strap

270051516
1010000406: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-005-1728
Access Cover

270051728
1010000642: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-059-6501
Loop Clamp

270596501
901-KL-340: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-026-1786
Mending Plate

270261786
2010.5111.014: RNCC: 2 | RNVC: 1

14 Jun 2005

5340-27-020-7528
Mounting Bracket

270207528
1009.1KI.0339-6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-006-0864
Access Cover

270060864
8K11403: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-058-7935
Mounting Bracket

270587935
55RS752911: RNCC: 2 | RNVC: 1

3 Apr 2013

5340-27-007-3981
Mounting Bracket

270073981
95AG A10477 AA: RNCC: 2 | RNVC: 1

3 Nov 1999

5340-27-026-1573
Mounting Bracket

270261573
1010FG-1808009: RNCC: 2 | RNVC: 1

9 Jun 2005

5340-27-054-7806
Mending Plate

270547806
203226: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-049-9784
Bow Handle

270499784
7700836144: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-016-6402
Mounting Bracket

270166402
98013036: RNCC: 2 | RNVC: 1

20 Feb 2003

5340-27-058-9325
Access Cover

270589325
VOE12744326: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-009-6679
Mounting Bracket

270096679
6555 JF: RNCC: 2 | RNVC: 1

15 Aug 2001

5340-27-037-5449
Expansion Plug

270375449
58425-L0100: RNCC: 5 | RNVC: 9

6 Aug 2007

5340-27-043-4379
Hand Crank

270434379
SAG-SOL: RNCC: 1 | RNVC: 2

11 Nov 2008

5340-27-021-6958
Flush Catch

270216958
81.32525.0046: RNCC: 2 | RNVC: 1

24 Dec 2003

5340-27-026-7885
Loop Clamp

270267885
500010588102: RNCC: 2 | RNVC: 1

2 Aug 2005

5340-27-006-9238
Mounting Bracket

270069238
91AG A102K667 AC: RNCC: 2 | RNVC: 1

26 Jun 1999

5340-27-017-3858
Mounting Bracket

270173858
1009.1IS.0040: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-044-1663
Angle Bracket

270441663
17606-32: RNCC: 2 | RNVC: 1

13 Jan 2009

5340-27-022-5556
Strap End Clip

270225556
5340-TJ-02710: RNCC: 2 | RNVC: 1

23 Mar 2004

5340-27-038-6948
Bow Handle

270386948
7701206628: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-059-3039
Access Cover

270593039
98019105-15: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-041-4333
Mending Plate

270414333
7173077: RNCC: 2 | RNVC: 1

23 May 2008

5340-27-041-3645
Utility Access Door

270413645
82X206 CM AL: RNCC: 2 | RNVC: 1

16 May 2008

5340-27-023-5402
Webbing Strap

270235402
8690508: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-022-1582
Mounting Bracket

270221582
60349711TU: RNCC: 2 | RNVC: 1

16 Feb 2004

5340-27-014-7014
Handle Grip

270147014
H306X1307: RNCC: 2 | RNVC: 1

15 Nov 2002

5340-27-005-1481
Hinged Hasp

270051481
1010000015: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-055-2453
Compression Cup

270552453
11,30X40,91X60,51: RNCC: 2 | RNVC: 2

23 Nov 2011

5340-27-019-3690
Expansion Shield

270193690
10121HD0083: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-048-1811
Mounting Bracket

270481811
377775405001: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-27-053-5628
Utility Access Door

270535628
205X208 CM CARPMA: RNCC: 2 | RNVC: 1

20 May 2011

Load More Results