What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 11 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 11 of 53

5340-27-048-4455
Bow Handle

270484455
6020578: RNCC: 3 | RNVC: 2

9 Feb 2010

5340-27-041-4096
Utility Access Door

270414096
87X207 CM AL: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-032-8752
Mounting Bracket

270328752
37565: RNCC: 2 | RNVC: 1

26 Sep 2006

5340-27-055-6958
Access Cover

270556958
5090353: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-038-8590
Mounting Bracket

270388590
2ABEP00253: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-009-7481
Mounting Bracket

270097481
81.96210.0379: RNCC: 2 | RNVC: 1

27 Aug 2001

5340-27-036-9452
Mending Plate

270369452
C01AM77: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-020-2877
Access Cover

270202877
10121YK5769: RNCC: 2 | RNVC: 1
10889729: RNCC: 2 | RNVC: 1

21 Nov 2003

5340-27-020-8975
Mounting Bracket

270208975
1009.1KI.0323-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-001-7290
Angle Bracket

270017290
TM55-1520-210-2AN743-7: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-009-6538
Webbing Strap

270096538
208047-100: RNCC: 2 | RNVC: 1

13 Aug 2001

5340-27-005-1686
Access Cover

270051686
1010002543: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-012-5802
Lock Bolt

270125802
10131MC0554: RNCC: 2 | RNVC: 1

14 Feb 2002

5340-27-049-1220
Mounting Bracket

270491220
898090510051: RNCC: 2 | RNVC: 1

5 Apr 2010

5340-27-039-1882
Butt Hinge

270391882
30 CM: RNCC: 2 | RNVC: 1

16 Nov 2007

5340-27-006-8273
Access Cover

270068273
062000117: RNCC: 2 | RNVC: 1

18 May 1999

5340-27-035-7993
Track Stop

270357993
51735976: RNCC: 2 | RNVC: 1

29 Mar 2007

5340-27-025-9405
Mending Plate

270259405
R79856319: RNCC: 2 | RNVC: 1

6 May 2005

5340-27-058-7615
Mounting Bracket

270587615
55RS752814: RNCC: 2 | RNVC: 1

28 Mar 2013

5340-27-023-7405
Mounting Bracket

270237405
5047T: RNCC: 2 | RNVC: 1

3 Aug 2004

5340-27-044-9194
Bow Handle

270449194
02008-TRS-10-0002-03: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-27-007-3315
Mounting Bracket

270073315
200 001 003: RNCC: 2 | RNVC: 1
MOD.2.20.20: RNCC: 2 | RNVC: 1

20 Oct 1999

5340-27-016-9781
Mounting Bracket

270169781
H-39-0180-50: RNCC: 2 | RNVC: 1

24 Apr 2003

5340-27-057-9518
Mending Plate

270579518
17877-ZY3-000: RNCC: 2 | RNVC: 1

21 Nov 2012

5340-27-060-0105
Mounting Bracket

270600105
MM-7490-0624: RNCC: 2 | RNVC: 1

24 Dec 2013

5340-27-013-6064
Mending Plate

270136064
4192598-2: RNCC: 2 | RNVC: 1

2 Jul 2002

5340-27-015-0341
Loop Clamp

270150341
6208671: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-050-0484
Bridge Clamp

270500484
06674104153: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-045-9314
Loop Clamp

270459314
8D04470212053: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-022-2587
Expansion Plug

270222587
10121YT5614: RNCC: 2 | RNVC: 1
000443036000: RNCC: 2 | RNVC: 1

20 Feb 2004

5340-27-053-9171
Bumper

270539171
H346069600: RNCC: 2 | RNVC: 1

7 Jul 2011

5340-27-046-6803
Access Cover

270466803
Y532-67800-200: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-058-9238
Loop Clamp

270589238
KJR175-128: RNCC: 5 | RNVC: 9

30 Apr 2013

5340-27-058-2806
Mounting Bracket

270582806
MM-7490-0051: RNCC: 2 | RNVC: 1

3 Jan 2013

5340-27-006-8627
Mounting Plate

270068627
062000601-1: RNCC: 2 | RNVC: 1

27 May 1999

5340-27-048-5802
Mending Plate

270485802
HD341278SY: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-037-9078
Mending Plate

270379078
14660-02N12: RNCC: 5 | RNVC: 9

5 Sep 2007

5340-27-051-7846
Mounting Bracket

270517846
020/20146: RNCC: 2 | RNVC: 1

29 Nov 2010

5340-27-050-1557
Mending Plate

270501557
107408: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-033-6195
Expansion Shield

270336195
5340DUBE9880001: RNCC: 2 | RNVC: 1

6 Nov 2006

5340-27-004-5113
Access Cover

270045113
10121YK5236: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-017-6482
Mounting Bracket

270176482
H-39-0570-50: RNCC: 2 | RNVC: 1

13 Aug 2003

5340-27-053-0306
Locking Stay

270530306
J35926-A: RNCC: 2 | RNVC: 1

18 Mar 2011

5340-27-039-2782
Loop Holder

270392782
3587701: RNCC: 2 | RNVC: 1

22 Nov 2007

5340-27-028-7773
Mounting Bracket

270287773
884-5800-988: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-024-3847
Mounting Bracket

270243847
1010FK-0000328: RNCC: 2 | RNVC: 1

19 Oct 2004

5340-27-001-7244
Loop Clamp

270017244
TM55-1520-210-3MS-2191943: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-052-8701
Mounting Bracket

270528701
76 8C 596 85R: RNCC: 3 | RNVC: 2

2 Mar 2011

5340-27-001-7385
Loop Clamp

270017385
TM55-1520-210-2AN735-D80: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-035-5357
Mounting Bracket

270355357
7735810: RNCC: 2 | RNVC: 1

16 Mar 2007

5340-27-059-6522
Loop Clamp

270596522
901-KL-352: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-054-3361
Mounting Bracket

270543361
K720-60000-200: RNCC: 2 | RNVC: 1

22 Aug 2011

5340-27-043-4807
Access Cover

270434807
KAPAK, KABLO GIRIS: RNCC: 2 | RNVC: 1

13 Nov 2008

5340-27-017-3633
Mending Plate

270173633
1009.1IS.0068-A/5: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-017-3653
Mending Plate

270173653
1009.1IS.0082-4: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-054-7769
Drift Bolt

270547769
A9472650349: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-020-7861
Mounting Bracket

270207861
1009.1KI.0303-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-006-8233
Mounting Bracket

270068233
NTC3679-L: RNCC: 2 | RNVC: 1

17 May 1999

5340-27-020-9401
Mounting Bracket

270209401
1009.1KI.0264-2*2-7: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-2542
Mending Plate

270572542
KI046216-2: RNCC: 2 | RNVC: 1

11 Jul 2012

5340-27-021-4758
Rod End Clevis

270214758
05001FC0003: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-7829
Mounting Bracket

270207829
1009.1KI.0127-4*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-2837
Mounting Bracket

270442837
12E00-70304-AB: RNCC: 2 | RNVC: 1

22 Jan 2009

5340-27-008-2451
Mounting Bracket

270082451
98001452: RNCC: 2 | RNVC: 1

24 Aug 2000

5340-27-011-0702
Mechanical Stop

270110702
7111230184: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-016-9324
Loop Clamp

270169324
51.97401.6064: RNCC: 2 | RNVC: 1

11 Apr 2003

5340-27-004-7927
Access Cover

270047927
10091YK5098: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-022-0565
Mounting Bracket

270220565
1009 1IS 0068A-26: RNCC: 2 | RNVC: 1

29 Jan 2004

5340-27-017-9398
Mounting Bracket

270179398
1009 1YT 7003: RNCC: 2 | RNVC: 1

14 Oct 2003

5340-27-049-9674
Mending Plate

270499674
HD110546X: RNCC: 2 | RNVC: 2
HD110546X: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-038-2165
Access Cover

270382165
3582750: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-019-5212
Butt Hinge

270195212
07002YM0294: RNCC: 2 | RNVC: 1
DEVE BOYUNLU: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-038-2534
Mounting Bracket

270382534
1010FK-2702004-1: RNCC: 2 | RNVC: 1

24 Sep 2007

5340-27-018-8654
Butt Hinge

270188654
11051DM0009: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-020-6662
Block Clamp

270206662
1010FG-2201643: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-5555
Mounting Bracket

270575555
M539F327500600: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-018-6548
Mounting Bracket

270186548
1010FG-1201738: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-042-5803
Access Cover

270425803
54553359: RNCC: 2 | RNVC: 1

27 Aug 2008

5340-27-028-6663
Bridge Clamp

270286663
10003912: RNCC: 2 | RNVC: 1

27 Jan 2006

5340-27-038-3521
Mending Plate

270383521
422542-1: RNCC: 2 | RNVC: 1

1 Oct 2007

5340-27-043-4962
Mounting Bracket

270434962
901-UK-4: RNCC: 2 | RNVC: 1

14 Nov 2008

5340-27-020-7549
Mending Plate

270207549
1009.1KI.0236-1*3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-004-6067
Access Cover

270046067
10131YK0636: RNCC: 3 | RNVC: 2

15 May 1996

5340-27-054-1683
Mending Plate

270541683
98020625: RNCC: 3 | RNVC: 2

3 Aug 2011

5340-27-056-1157
Access Cover

270561157
C21A89: RNCC: 2 | RNVC: 1

14 Feb 2012

5340-27-009-1987
Mounting Bracket

270091987
98000719: RNCC: 2 | RNVC: 1

23 May 2001

5340-27-055-6879
Mounting Bracket

270556879
3K231852: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-004-5118
Access Cover

270045118
10121YK5261: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-004-5529
Loop Clamp

270045529
10091YK5046: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-011-4848
Access Cover

270114848
4542111306: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-028-3659
Padlock

270283659
KILIT TAKIMI: RNCC: 2 | RNVC: 1

27 Dec 2005

5340-27-022-3626
Expansion Plug

270223626
10121YT5636: RNCC: 2 | RNVC: 1

27 Feb 2004

5340-27-048-2767
Catch Strike

270482767
0007430015: RNCC: 2 | RNVC: 2
0007430015: RNCC: 3 | RNVC: 2

25 Jan 2010

5340-27-050-0679
Mending Plate

270500679
102004: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-016-5791
Loop Holder

270165791
8B100369: RNCC: 2 | RNVC: 1

6 Feb 2003

5340-27-014-1585
Handle Grip

270141585
16HY1-305320: RNCC: 2 | RNVC: 1

18 Sep 2002

5340-27-055-5308
Mending Plate

270555308
84353427: RNCC: 2 | RNVC: 2

9 Dec 2011

5340-27-053-1128
Mending Plate

270531128
104580: RNCC: 3 | RNVC: 2

29 Mar 2011

5340-27-012-8666
Angle Bracket

270128666
98012733: RNCC: 2 | RNVC: 1

28 Mar 2002

5340-27-023-1171
Access Cover

270231171
1010FK-2701838: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-053-9661
Mounting Bracket

270539661
55RS551826: RNCC: 2 | RNVC: 1

12 Jul 2011

5340-27-053-6865
Mending Plate

270536865
C171-000013: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-27-049-4838
Mending Plate

270494838
107560-102: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-050-9792
Loop Clamp

270509792
90464-03M15: RNCC: 3 | RNVC: 2
90464-03M15: RNCC: 3 | RNVC: 2

21 Sep 2010

5340-27-056-7650
Mounting Bracket

270567650
MM-7412-0148: RNCC: 2 | RNVC: 1

10 May 2012

5340-27-022-2148
Mending Plate

270222148
11365MBT000: RNCC: 2 | RNVC: 1
11365MBT000: RNCC: 5 | RNVC: 9

19 Feb 2004

5340-27-005-5766
Platen Holder

270055766
AE011032: RNCC: 3 | RNVC: 2

5 Jun 1997

5340-27-006-8732
Rod End Clevis

270068732
062000406: RNCC: 2 | RNVC: 1

2 Jun 1999

5340-27-006-9154
Mounting Bracket

270069154
95AG A21193 AA: RNCC: 2 | RNVC: 1

24 Jun 1999

5340-27-004-5137
Access Cover

270045137
10121YK5401: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-047-3358
Bow Handle

270473358
897866600151: RNCC: 2 | RNVC: 1

23 Nov 2009

5340-27-011-9831
Truss Fairlead

270119831
MA-7000: RNCC: 2 | RNVC: 1

25 Dec 2001

5340-27-020-1729
Bridge Clamp

270201729
7700759876: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-014-9825
Lever Bracket

270149825
10091YB0228: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-035-4808
Handle Grip

270354808
TTN31: RNCC: 2 | RNVC: 1

15 Mar 2007

5340-27-054-1818
Loop Holder

270541818
40-004.00/10-127-2005: RNCC: 2 | RNVC: 1

4 Aug 2011

5340-27-013-6996
Mortise Lock

270136996
155/R: RNCC: 2 | RNVC: 1
SILINDIR KAPI KILIDI: RNCC: 2 | RNVC: 1
155/R: RNCC: 2 | RNVC: 1
155/R-GENIS TIP: RNCC: 2 | RNVC: 1
SR-40: RNCC: 2 | RNVC: 1
155/R-GENIS TIP: RNCC: 2 | RNVC: 1

2 Oct 2004

5340-27-021-0740
Flush Catch

270210740
1009.1KI.0306-9*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-057-5710
Mounting Bracket

270575710
M539F328020600: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-051-2602
Mounting Bracket

270512602
55RS360138: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-27-042-3797
Mortise Lock

270423797
61826: RNCC: 2 | RNVC: 1
KILIT GENIS: RNCC: 2 | RNVC: 1

12 Aug 2008

5340-27-053-0515
Mending Plate

270530515
104593: RNCC: 2 | RNVC: 2

22 Mar 2011

5340-27-046-6784
Extension Handle

270466784
Y533-71405-202: RNCC: 3 | RNVC: 2

28 Sep 2009

5340-27-053-9280
Mending Plate

270539280
109739: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-005-1745
Spring Tension Clip

270051745
1010002091: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-005-7650
Hose Clamp

270057650
10131YK0513: RNCC: 3 | RNVC: 2

26 Jan 1998

5340-27-011-2441
Butt Hinge

270112441
07002YM0295: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-022-7349
Mending Plate

270227349
23V2212200: RNCC: 2 | RNVC: 1

14 Apr 2004

5340-27-021-4503
Handle Grip

270214503
572120800: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-052-6301
Mounting Bracket

270526301
62 89 500 01R: RNCC: 2 | RNVC: 2

10 Feb 2011

5340-27-036-8275
Mounting Bracket

270368275
40.205.4210: RNCC: 2 | RNVC: 1
40.205.4210: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-053-3488
Mending Plate

270533488
020/10215: RNCC: 2 | RNVC: 1
020/10215: RNCC: 2 | RNVC: 1

20 Apr 2011

5340-27-044-1671
Mounting Bracket

270441671
17606-30: RNCC: 2 | RNVC: 1

13 Jan 2009

5340-27-006-1150
Handle Ferrule

270061150
6K98086: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-057-7457
Mounting Bracket

270577457
5083047: RNCC: 2 | RNVC: 1

9 Oct 2012

5340-27-057-5535
Mounting Bracket

270575535
M539F323800600: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-054-6669
Mounting Bracket

270546669
55RS560320: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-044-0466
Lock-Release Lever

270440466
EREMSU MANDAL: RNCC: 2 | RNVC: 1

30 Dec 2008

5340-27-007-3624
Retaining Clip

270073624
W 702168 S300: RNCC: 2 | RNVC: 1

26 Oct 1999

5340-27-025-3427
Mounting Bracket

270253427
1010FG-1800111-1: RNCC: 2 | RNVC: 1

28 Feb 2005

5340-27-041-1684
Utility Access Door

270411684
CK-00: RNCC: 2 | RNVC: 1
CK-00: RNCC: 2 | RNVC: 1

6 May 2008

5340-27-060-0501
Mounting Bracket

270600501
AC-7490-0032: RNCC: 2 | RNVC: 1

2 Jan 2014

5340-27-058-7612
Mounting Bracket

270587612
55RS752622: RNCC: 2 | RNVC: 1

28 Mar 2013

5340-27-052-8859
Mending Plate

270528859
901-CD-84-6: RNCC: 2 | RNVC: 1

3 Mar 2011

5340-27-010-0142
Cover Strip

270100142
DZJF000194: RNCC: 2 | RNVC: 1

22 Oct 2001

5340-27-008-8849
Expansion Plug

270088849
8K230196: RNCC: 2 | RNVC: 1

8 Feb 2001

5340-27-027-8472
Bow Handle

270278472
71B22-55514-AA: RNCC: 2 | RNVC: 1

10 Nov 2005

5340-27-049-6130
Mounting Bracket

270496130
1010FG-0302072: RNCC: 2 | RNVC: 1

13 May 2010

5340-27-041-4281
Mounting Bracket

270414281
PTYB13100A-CGLT: RNCC: 2 | RNVC: 1

22 May 2008

5340-27-032-6304
Mounting Bracket

270326304
13D05-58322-AA: RNCC: 2 | RNVC: 1

25 Aug 2006

5340-27-007-1695
Retaining Clip

270071695
E 860388 S: RNCC: 2 | RNVC: 1

14 Sep 1999

5340-27-058-4421
Angle Bracket

270584421
M535E661320100: RNCC: 2 | RNVC: 1

31 Jan 2013

5340-27-021-0174
Lever Bracket

270210174
1009.1KI.0146-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-7526
Mounting Bracket

270207526
1009.1KI.0339-8: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-042-5684
Mending Plate

270425684
54553656: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-022-5897
Mounting Bracket

270225897
2319T: RNCC: 2 | RNVC: 1

25 Mar 2004

5340-27-035-0379
Mounting Bracket

270350379
901-MA-153: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-019-5569
Webbing Strap

270195569
07002YK0074: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-008-8542
Mounting Bracket

270088542
98005247: RNCC: 2 | RNVC: 1

2 Feb 2001

5340-27-024-3077
Mounting Bracket

270243077
1010FG-F1320010: RNCC: 2 | RNVC: 1

9 Oct 2004

5340-27-021-7272
Mounting Bracket

270217272
1009 1YC 0024: RNCC: 2 | RNVC: 1

25 Dec 2003

5340-27-050-8570
Mounting Bracket

270508570
10046470: RNCC: 2 | RNVC: 1

3 Sep 2010

5340-27-056-7216
Mounting Bracket

270567216
ADOP-SHELTER-180-ARSO: RNCC: 2 | RNVC: 1

2 May 2012

5340-27-018-0907
Loop Clamp

270180907
72A22-16819-AA: RNCC: 2 | RNVC: 1
KEL 01: RNCC: 2 | RNVC: 1
KEL 01: RNCC: 2 | RNVC: 1
04039050: RNCC: 2 | RNVC: 1

31 Oct 2003

5340-27-055-3255
Mounting Bracket

270553255
1692-0114: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-27-041-5109
Mounting Bracket

270415109
901-CK-100: RNCC: 2 | RNVC: 1

29 May 2008

5340-27-018-0023
Bow Handle

270180023
897856460101: RNCC: 2 | RNVC: 1

22 Oct 2003

5340-27-056-8686
Mending Plate

270568686
202611: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-051-4100
Mending Plate

270514100
105802: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-011-0542
Access Cover

270110542
7115310412: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-023-9337
Mounting Bracket

270239337
2ABMK 00571: RNCC: 2 | RNVC: 1

24 Aug 2004

5340-27-055-3236
Mounting Bracket

270553236
1692-0059: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-27-054-1328
Mounting Bracket

270541328
83A19-61846-AA: RNCC: 2 | RNVC: 1

28 Jul 2011

5340-27-055-3256
Mounting Bracket

270553256
1692-0115: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-27-022-0294
Mounting Bracket

270220294
KMS 0021-20: RNCC: 2 | RNVC: 1

26 Jan 2004

5340-27-055-2175
Mounting Bracket

270552175
1692-0051: RNCC: 2 | RNVC: 1

21 Nov 2011

5340-27-055-6954
Access Cover

270556954
5117725: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-001-7895
Loop Clamp

270017895
E-AB-205-T53-4 MS21919WDG-18: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-048-9236
Angle Bracket

270489236
10029356: RNCC: 2 | RNVC: 1

18 Mar 2010

5340-27-025-9924
Mounting Bracket

270259924
1615881880: RNCC: 2 | RNVC: 1

17 May 2005

5340-27-023-1166
Mounting Bracket

270231166
2ABM 1MK 0038: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-027-5158
Mortise Lock

270275158
355/R: RNCC: 2 | RNVC: 1

7 Oct 2005

5340-27-020-7543
Mounting Bracket

270207543
1009.1KI.0105-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-1856
Retaining Clip

270071856
E 864803 S: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-057-4003
Mending Plate

270574003
0201514022: RNCC: 2 | RNVC: 1

31 Jul 2012

5340-27-058-6914
Mounting Bracket

270586914
25010379: RNCC: 2 | RNVC: 1

14 Mar 2013

5340-27-036-4185
Handle Grip

270364185
3C466K815BA: RNCC: 2 | RNVC: 1

4 Jun 2007

5340-27-029-2929
Mending Plate

270292929
81.90801.0347: RNCC: 2 | RNVC: 1

20 Mar 2006

5340-27-054-2917
Mending Plate

270542917
98019323: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-027-8884
Mounting Bracket

270278884
2.HIBM-95-0156-001: RNCC: 2 | RNVC: 1

16 Nov 2005

5340-27-025-6517
Access Cover

270256517
06271: RNCC: 2 | RNVC: 1

25 Mar 2005

5340-27-007-8100
Mounting Bracket

270078100
4B100039: RNCC: 2 | RNVC: 1

23 Feb 2000

5340-27-017-3160
Bow Handle

270173160
44112: RNCC: 2 | RNVC: 1
44112: RNCC: 2 | RNVC: 1

20 Aug 2003

5340-27-056-0765
Crank Handle

270560765
480G-01102: RNCC: 5 | RNVC: 9

6 Feb 2012

5340-27-056-7078
Mounting Bracket

270567078
ADOP-SHELTER-180-STK: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-033-6535
Mounting Bracket

270336535
40-205-4041: RNCC: 2 | RNVC: 1
40-205-4041: RNCC: 2 | RNVC: 1

9 Nov 2006

5340-27-055-0942
Mounting Bracket

270550942
1010FMA-0005029: RNCC: 2 | RNVC: 1

3 Nov 2011

5340-27-059-6844
Loop Clamp

270596844
901-KL-408: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-032-7527
Mounting Bracket

270327527
13D00-58337-AA: RNCC: 2 | RNVC: 1

14 Sep 2006

5340-27-050-0483
Mending Plate

270500483
HD120189: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-054-1758
Mending Plate

270541758
98021775: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-013-9065
Mounting Bracket

270139065
388880581101: RNCC: 2 | RNVC: 1

7 Aug 2002

5340-27-054-5539
Mounting Bracket

270545539
98022426: RNCC: 3 | RNVC: 2

23 Sep 2011

5340-27-017-5363
Mounting Bracket

270175363
MP001492: RNCC: 2 | RNVC: 1

11 Jul 2003

5340-27-022-1117
Expansion Plug

270221117
10121YT5572: RNCC: 2 | RNVC: 1
541418: RNCC: 2 | RNVC: 1

11 Feb 2004

5340-27-021-1737
Angle Bracket

270211737
1010FG-0612202: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-047-8076
Mounting Bracket

270478076
13C02-36877-AA: RNCC: 2 | RNVC: 1

17 Dec 2009

5340-27-045-0038
Mounting Bracket

270450038
805-5820-637: RNCC: 3 | RNVC: 2

25 Mar 2009

5340-27-052-7044
Loop Clamp

270527044
DIN-3016-1-D1-23-15-W3-CR: RNCC: 2 | RNVC: 2

16 Feb 2011

5340-27-055-8010
Mounting Bracket

270558010
464 AS 450: RNCC: 2 | RNVC: 2

5 Jan 2012

5340-27-057-9902
Mounting Bracket

270579902
63226-ZY3-000: RNCC: 2 | RNVC: 1

27 Nov 2012

5340-27-006-8879
Vehicular Bumper

270068879
A 436 520 72 70: RNCC: 2 | RNVC: 1
A4365207270: RNCC: 2 | RNVC: 1
A 436 520 7270: RNCC: 5 | RNVC: 9

9 Jun 1999

5340-27-056-2696
Filler Opening Cap

270562696
17620ZT3010: RNCC: 5 | RNVC: 9
GBG1.0 INV-23: RNCC: 5 | RNVC: 9

6 Mar 2012

5340-27-008-2467
Mounting Bracket

270082467
98001133: RNCC: 2 | RNVC: 1

25 Feb 2003

5340-27-037-1334
Handle Grip

270371334
58RS112900: RNCC: 2 | RNVC: 1

16 Jul 2007

5340-27-020-7553
Mounting Bracket

270207553
1009.1KI.0266-11: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-029-6661
Mending Plate

270296661
3LD-15191-00-00: RNCC: 5 | RNVC: 9

28 Apr 2006

5340-27-024-2747
Mounting Bracket

270242747
73-3579-2371: RNCC: 2 | RNVC: 1

7 Oct 2004

5340-27-058-0027
Mending Plate

270580027
13622-ZY3-C00: RNCC: 2 | RNVC: 1

29 Nov 2012

5340-27-056-4614
Mending Plate

270564614
10064490: RNCC: 2 | RNVC: 2

2 Apr 2012

5340-27-049-4768
Mounting Bracket

270494768
108129: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-041-4092
Utility Access Door

270414092
109X210 CM AL: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-056-9750
Catch Strike

270569750
9T16V441A07AA: RNCC: 2 | RNVC: 1

6 Jun 2012

5340-27-053-2896
Mounting Bracket

270532896
H341156001: RNCC: 2 | RNVC: 1

15 Apr 2011

5340-27-008-5216
Access Cover

270085216
8868305: RNCC: 2 | RNVC: 1

25 Oct 2000

5340-27-021-8236
Synchro Clamp

270218236
27861: RNCC: 2 | RNVC: 1

31 Dec 2003

5340-27-041-4109
Utility Access Door

270414109
130X142 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-059-7679
Mounting Bracket

270597679
9999-0000-0346: RNCC: 2 | RNVC: 1

31 Oct 2013

5340-27-041-8809
Bridge Clamp

270418809
KG55-042010: RNCC: 2 | RNVC: 1
KG55-042010: RNCC: 2 | RNVC: 1

27 Jun 2008

5340-27-025-5793
Handle Grip

270255793
HRA22A7406 214A7-42011: RNCC: 2 | RNVC: 1

24 Mar 2005

5340-27-028-5526
Mounting Bracket

270285526
72A49-56358-AA: RNCC: 2 | RNVC: 1

16 Jan 2006

5340-27-041-7139
Rod End Clevis

270417139
1010FK-2810926-7: RNCC: 2 | RNVC: 1

12 Jun 2008

5340-27-021-3084
Mending Plate

270213084
1012.1HSCA.02-14: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-010-0436
Mounting Bracket

270100436
939302-1: RNCC: 2 | RNVC: 1
939302-1: RNCC: 2 | RNVC: 1

25 Oct 2001

5340-27-021-3486
Mounting Bracket

270213486
1009.1KI.0272-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-039-2605
Door Closer

270392605
2022V: RNCC: 2 | RNVC: 1
2022V: RNCC: 5 | RNVC: 9

21 Nov 2007

5340-27-044-2997
Mounting Bracket

270442997
YC1H19E754FB: RNCC: 2 | RNVC: 1

23 Jan 2009

5340-27-054-5534
Mounting Bracket

270545534
98021945: RNCC: 3 | RNVC: 2

23 Sep 2011

5340-27-052-2005
Bridge Clamp

270522005
8.216.000.388.0: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-27-055-3253
Mounting Bracket

270553253
1692-0112: RNCC: 3 | RNVC: 2

29 Nov 2011

5340-27-037-5604
Caster Wheel

270375604
50 MM: RNCC: 5 | RNVC: 9

7 Aug 2007

5340-27-015-8035
Mending Plate

270158035
2106001780: RNCC: 2 | RNVC: 1

13 Dec 2002

5340-27-008-3159
Rod Retainer Clip

270083159
14202383: RNCC: 2 | RNVC: 1
14202383: RNCC: 2 | RNVC: 1

14 Sep 2000

5340-27-013-9314
Handle Grip

270139314
388882750001: RNCC: 2 | RNVC: 1

11 Aug 2003

5340-27-040-4629
Mounting Bracket

270404629
12326240: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-057-7874
Mounting Bracket

270577874
1010FMA-1202709: RNCC: 2 | RNVC: 1

19 Oct 2012

5340-27-008-9681
Mending Plate

270089681
98001185-1: RNCC: 2 | RNVC: 1

1 Mar 2001

5340-27-058-9933
Mounting Bracket

270589933
VOE11419282: RNCC: 3 | RNVC: 2
VOE11419282: RNCC: 3 | RNVC: 2

13 May 2013

5340-27-023-0563
Mounting Bracket

270230563
KMS 0044: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-042-1218
Mounting Bracket

270421218
25282: RNCC: 2 | RNVC: 1

21 Jul 2008

5340-27-034-2230
Mounting Bracket

270342230
200008: RNCC: 2 | RNVC: 1

18 Dec 2006

5340-27-035-2093
Mending Plate

270352093
55195661: RNCC: 2 | RNVC: 1

2 Mar 2007

5340-27-053-4830
Mounting Bracket

270534830
H343002100: RNCC: 2 | RNVC: 1

11 May 2011

5340-27-034-1160
Mounting Bracket

270341160
0000GK0136368: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-053-9697
Mending Plate

270539697
98017329: RNCC: 2 | RNVC: 2

12 Jul 2011

5340-27-024-7028
Mounting Bracket

270247028
1010FG-0000758: RNCC: 2 | RNVC: 1

26 Nov 2004

5340-27-034-6778
Mounting Bracket

270346778
8585639: RNCC: 2 | RNVC: 1

1 Feb 2007

5340-27-034-7405
Bridge Clamp

270347405
11000-16696-AA: RNCC: 2 | RNVC: 1

6 Feb 2007

5340-27-053-5027
Mounting Bracket

270535027
H342730701: RNCC: 2 | RNVC: 1

12 May 2011

5340-27-025-0142
Mounting Bracket

270250142
05001DK0224: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-035-8853
Bridge Clamp

270358853
3C46E200M46AB: RNCC: 2 | RNVC: 1

5 Apr 2007

5340-27-035-8181
Handle Grip

270358181
82490943: RNCC: 2 | RNVC: 1

30 Mar 2007

5340-27-024-7464
Catch Strike

270247464
1010FK-1802033: RNCC: 2 | RNVC: 1

30 Nov 2004

5340-27-055-6976
Handle Ferrule

270556976
4986427: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-045-5449
Bridge Clamp

270455449
K1C 1035 -: RNCC: 3 | RNVC: 2

14 May 2009

5340-27-023-9823
Angle Bracket

270239823
10121YT5547: RNCC: 2 | RNVC: 1
765F9B552ABA: RNCC: 2 | RNVC: 1

2 Sep 2004

5340-27-051-2770
Mending Plate

270512770
16L00-36043-AA: RNCC: 2 | RNVC: 1

13 Oct 2010

5340-27-008-8817
Handle Grip

270088817
270800181: RNCC: 2 | RNVC: 1

7 Feb 2001

5340-27-040-8552
Latch Bar

270408552
7335792272: RNCC: 2 | RNVC: 1

2 Apr 2008

5340-27-007-9994
Rod End Clevis

270079994
F6133: RNCC: 2 | RNVC: 1

22 May 2000

5340-27-006-9240
Mounting Bracket

270069240
91AG A624K26 AB: RNCC: 2 | RNVC: 1

28 Jun 1999

5340-27-049-5004
Mending Plate

270495004
108048: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-049-2976
Catch Strike

270492976
898058228051: RNCC: 2 | RNVC: 1

19 Apr 2010

5340-27-019-2576
Handle Grip

270192576
10131YT0578: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-020-9514
Mending Plate

270209514
1010FG-0000354: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-047-4991
Catch Strike

270474991
7701348166: RNCC: 3 | RNVC: 2

4 Dec 2009

5340-27-059-4603
Loop Clamp

270594603
VOE13949747: RNCC: 3 | RNVC: 2

13 Aug 2013

5340-27-028-4326
Bail Handle

270284326
KEDM-131: RNCC: 2 | RNVC: 1

30 Dec 2005

5340-27-059-5024
Clamping Catch

270595024
VOE12747417: RNCC: 3 | RNVC: 2
VOE12747417: RNCC: 3 | RNVC: 2

23 Aug 2013

5340-27-027-7376
Mounting Bracket

270277376
7151597: RNCC: 2 | RNVC: 1

26 Oct 2005

5340-27-050-8508
Access Cover

270508508
6J8-43633-00: RNCC: 3 | RNVC: 2
6J8-43633-00: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-041-4736
Mounting Bracket

270414736
83A19-61966-AA: RNCC: 2 | RNVC: 1
PTYM10400A: RNCC: 2 | RNVC: 1

27 May 2008

5340-27-054-6608
Mounting Bracket

270546608
55RS752878: RNCC: 2 | RNVC: 2

5 Oct 2011

5340-27-024-4087
Mounting Bracket

270244087
1010FK-1813261: RNCC: 2 | RNVC: 1

21 Oct 2004

5340-27-025-3262
Rod End Clevis

270253262
23361: RNCC: 2 | RNVC: 1

24 Feb 2005

5340-27-058-7438
Mounting Bracket

270587438
VOE57043: RNCC: 3 | RNVC: 2

27 Mar 2013

5340-27-001-2284
Loop Clamp

270012284
1-4: RNCC: 3 | RNVC: 2

27 Jul 1993

5340-27-021-2376
Butt Hinge

270212376
10131MM0049: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-8040
Flush Lock

270288040
KONT. SAG: RNCC: 2 | RNVC: 1

8 Feb 2006

5340-27-048-4070
Bow Handle

270484070
300021: RNCC: 3 | RNVC: 2

8 Feb 2010

5340-27-043-8089
Mounting Bracket

270438089
12A14-16852-AA: RNCC: 2 | RNVC: 1

16 Dec 2008

5340-27-021-8031
Expansion Plug

270218031
10889990: RNCC: 2 | RNVC: 1
10121YT5565: RNCC: 2 | RNVC: 1

30 Dec 2003

5340-27-005-1727
Access Cover

270051727
1010000641: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-010-1830
Webbing Strap

270101830
98010204: RNCC: 2 | RNVC: 1

13 Nov 2001

5340-27-017-3702
Pad Eye

270173702
1009.1IS.0073-16: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-024-0918
Mounting Bracket

270240918
1924220101: RNCC: 2 | RNVC: 1
4.06.18.01: RNCC: 5 | RNVC: 1

21 Sep 2004

5340-27-022-0234
Mounting Bracket

270220234
1009 1KI 0234/1-25: RNCC: 2 | RNVC: 1

26 Jan 2004

5340-27-007-0397
Lock Key

270070397
4K60286: RNCC: 2 | RNVC: 1

20 Jul 1999

5340-27-001-7256
Clevis And U-Bolt

270017256
T101897: RNCC: 3 | RNVC: 2

9 Jul 1994

5340-27-015-7300
Butt Hinge

270157300
16001DM0140: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-049-4745
Mending Plate

270494745
105364: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-013-4522
Lever Bracket

270134522
53RS200201: RNCC: 2 | RNVC: 1

19 Jun 2002

5340-27-038-8576
Mounting Bracket

270388576
2ABEP00294: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-049-1806
Flush Catch

270491806
8200571699: RNCC: 3 | RNVC: 2

9 Apr 2010

5340-27-006-4210
Flush Catch Claw

270064210
10000123: RNCC: 2 | RNVC: 1
10000123: RNCC: 2 | RNVC: 1
10000123: RNCC: 2 | RNVC: 1

11 Mar 1999

5340-27-004-5147
Access Cover

270045147
10121YK5289: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-058-5745
Mounting Bracket

270585745
VOE12746744: RNCC: 3 | RNVC: 2
VOE12746744: RNCC: 3 | RNVC: 2

22 Feb 2013

5340-27-053-9160
Mending Plate

270539160
98019831: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-27-048-4651
Bridge Clamp

270484651
BW301202009A: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-27-054-6083
Mounting Bracket

270546083
98016944: RNCC: 2 | RNVC: 2

30 Sep 2011

5340-27-005-1756
Rod End Connector

270051756
1010002611: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-027-1316
Hook Handle

270271316
60714: RNCC: 2 | RNVC: 1

7 Sep 2005

5340-27-018-6656
Access Cover

270186656
1010FG-2401697: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-2475
Mounting Bracket

270402475
1010005945: RNCC: 2 | RNVC: 1

16 Jan 2008

5340-27-049-9670
Mending Plate

270499670
HD110818X: RNCC: 2 | RNVC: 2
HD110818X: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-015-7226
Flush Lock

270157226
10091YS0158: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-007-0212
Mounting Bracket

270070212
93AB A20451 AC: RNCC: 2 | RNVC: 1

13 Jul 1999

5340-27-021-4553
Mortise Lock Set

270214553
07002YS0027: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-043-8457
Bow Handle

270438457
TUTAMAK: RNCC: 2 | RNVC: 1

18 Dec 2008

5340-27-058-3453
Flush Catch

270583453
1866A6: RNCC: 2 | RNVC: 1

14 Jan 2013

5340-27-054-7175
Mending Plate

270547175
98022776: RNCC: 2 | RNVC: 2

10 Oct 2011

5340-27-053-5043
Mounting Bracket

270535043
H342423800: RNCC: 2 | RNVC: 1

12 May 2011

5340-27-015-0486
Angle Bracket

270150486
1010FK-1811459: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-005-1594
Control Rod

270051594
1010000259: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-035-9565
Ball Socket Seat

270359565
1547962: RNCC: 2 | RNVC: 1

12 Apr 2007

5340-27-012-6906
Blank Panel

270126906
98000270: RNCC: 2 | RNVC: 1

5 Mar 2002

5340-27-014-1064
Bridge Clamp

270141064
EM BKT 20 MM: RNCC: 2 | RNVC: 1
PPRC KELEPCE 20: RNCC: 2 | RNVC: 1
PPRC KELEPCE 20: RNCC: 2 | RNVC: 1

10 Sep 2002

5340-27-048-3902
Mounting Bracket

270483902
5441465-A: RNCC: 2 | RNVC: 1

5 Feb 2010

5340-27-049-1693
Mounting Bracket

270491693
S01 001 0001 1650 014 F 02.N: RNCC: 2 | RNVC: 1

9 Apr 2010

5340-27-020-7546
Mounting Bracket

270207546
1009.1KI.0105-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-5212
Flush Catch

270215212
1009.1KI.0306-9: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-032-6488
T Bracket

270326488
40-660-7675: RNCC: 2 | RNVC: 1
40-660-7675: RNCC: 2 | RNVC: 1

29 Aug 2006

5340-27-017-3867
Mounting Bracket

270173867
1009.1IS.0058-7: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-044-8961
Bow Handle

270448961
735442212: RNCC: 3 | RNVC: 2

19 Mar 2009

5340-27-041-3630
Utility Access Door

270413630
97X210 CM AL: RNCC: 2 | RNVC: 1

15 May 2008

5340-27-021-2372
Butt Hinge

270212372
10131MM0061: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-019-6251
Butt Hinge

270196251
05001HM0083: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-8486
Mounting Bracket

270588486
VOE12745522: RNCC: 3 | RNVC: 2

15 Apr 2013

5340-27-049-2085
Angle Bracket

270492085
107456: RNCC: 3 | RNVC: 2

13 Apr 2010

5340-27-049-8485
Mending Plate

270498485
108587: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-049-8487
Mending Plate

270498487
108589: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-059-5079
Padlock

270595079
VOE12749288: RNCC: 3 | RNVC: 2
VOE12749288: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-27-005-1803
Loop Clamp

270051803
1010002169: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-019-5533
Mounting Bracket

270195533
07002YH0076: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-053-0545
Mending Plate

270530545
108015: RNCC: 2 | RNVC: 2

22 Mar 2011

5340-27-035-8940
Loop Clamp

270358940
85011237: RNCC: 2 | RNVC: 1

5 Apr 2007

5340-27-024-1678
Access Cover

270241678
06593: RNCC: 2 | RNVC: 1
6167200: RNCC: 2 | RNVC: 1

24 Sep 2004

5340-27-009-9544
Key Holder

270099544
81.97118.6004: RNCC: 2 | RNVC: 1

17 Oct 2001

5340-27-048-2778
Catch Strike

270482778
387001618001: RNCC: 2 | RNVC: 1

25 Jan 2010

5340-27-053-1381
Mending Plate

270531381
10026181: RNCC: 2 | RNVC: 1

31 Mar 2011

5340-27-055-4285
Mounting Bracket

270554285
5115830: RNCC: 2 | RNVC: 2

5 Dec 2011

5340-27-033-7173
Flush Catch Claw

270337173
8332034640: RNCC: 2 | RNVC: 1

15 Nov 2006

5340-27-057-4261
Mending Plate

270574261
0302723047: RNCC: 2 | RNVC: 1

7 Aug 2012

5340-27-042-1601
Mounting Bracket

270421601
2.HIBM-4L-592/4-3: RNCC: 2 | RNVC: 1

23 Jul 2008

5340-27-008-2480
Angle Bracket

270082480
98000227-2: RNCC: 2 | RNVC: 1

28 Aug 2000

5340-27-020-7554
Mounting Bracket

270207554
1009.1KI.0266-11/1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-029-0448
Mounting Bracket

270290448
M52T3011R450222: RNCC: 2 | RNVC: 1

24 Feb 2006

5340-27-019-3689
Expansion Shield

270193689
10121HD0082: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-026-0489
Loop Holder

270260489
34: RNCC: 2 | RNVC: 1

26 May 2005

5340-27-021-0368
Beam Gripping Clamp

270210368
07002YK0381: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-0136
Mounting Bracket

270560136
H346125300: RNCC: 2 | RNVC: 1

25 Jan 2012

5340-27-018-7084
Mounting Bracket

270187084
1010FK-2702033: RNCC: 2 | RNVC: 1
1010FK-2702033: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-043-4507
Bridge Clamp

270434507
026279E: RNCC: 2 | RNVC: 1

12 Nov 2008

5340-27-045-2599
Catch Strike

270452599
6958A013: RNCC: 3 | RNVC: 2

20 Apr 2009

5340-27-029-4068
Mending Plate

270294068
KY16037AA: RNCC: 5 | RNVC: 9

27 Mar 2006

5340-27-008-2453
Angle Bracket

270082453
98000229: RNCC: 2 | RNVC: 1

24 Aug 2000

5340-27-021-0351
Mounting Bracket

270210351
1009.1KI.0308-7: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-007-1836
Access Cover

270071836
E 857122 S: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-022-8208
Loop Clamp

270228208
7.01.02.02: RNCC: 2 | RNVC: 1

22 Apr 2004

5340-27-040-5746
Tee Hinge

270405746
8200116177: RNCC: 2 | RNVC: 1

31 Jan 2008

5340-27-020-8936
Loop Holder

270208936
332756-LD: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-008-9291
Access Door Hinge

270089291
98005192: RNCC: 2 | RNVC: 1

22 Feb 2001

5340-27-050-3890
Mending Plate

270503890
108485: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-021-1729
Access Cover

270211729
1010FK-2702152: RNCC: 2 | RNVC: 1
1010FK-2702152: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-012-8962
Access Cover

270128962
98003522: RNCC: 2 | RNVC: 1

2 Apr 2002

5340-27-022-8368
Block Clamp

270228368
76006453: RNCC: 2 | RNVC: 1

23 Apr 2004

5340-27-052-3868
Mending Plate

270523868
72C03-73695-AA: RNCC: 2 | RNVC: 1

17 Jan 2011

5340-27-023-1192
Mounting Bracket

270231192
2ABM 1MK 0025: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-042-9957
Mounting Bracket

270429957
40.624.0167: RNCC: 2 | RNVC: 1
40.624.0167: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-019-0142
Loop Clamp

270190142
05001DK0217: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-036-9450
Mending Plate

270369450
C01AL78: RNCC: 2 | RNVC: 1

6 Jul 2007

5340-27-036-4294
Mounting Bracket

270364294
234662: RNCC: 2 | RNVC: 1

5 Jun 2007

5340-27-035-9346
Plug Button

270359346
7693022: RNCC: 2 | RNVC: 1

10 Apr 2007

5340-27-040-6928
Mounting Bracket

270406928
1.HIBM-1I-2711: RNCC: 2 | RNVC: 1

29 Feb 2008

5340-27-047-9900
Mounting Bracket

270479900
130100140: RNCC: 3 | RNVC: 2

28 Dec 2009

5340-27-060-0221
Crank Handle

270600221
M521D327000000: RNCC: 2 | RNVC: 1

26 Dec 2013

5340-27-059-3381
Mending Plate

270593381
10082498: RNCC: 2 | RNVC: 1

17 Jul 2013

5340-27-058-0417
Caster Wheel

270580417
KK0392200: RNCC: 5 | RNVC: 9

4 Dec 2012

5340-27-053-8506
Mounting Bracket

270538506
H345104700: RNCC: 2 | RNVC: 1

28 Jun 2011

5340-27-041-5956
Bow Handle

270415956
7254919: RNCC: 2 | RNVC: 1

5 Jun 2008

5340-27-020-9515
Mending Plate

270209515
1010FG-0000340: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-2156
Mounting Bracket

270552156
1692-0169: RNCC: 3 | RNVC: 2

21 Nov 2011

5340-27-032-7008
Mending Plate

270327008
13D05-58337-AB: RNCC: 2 | RNVC: 1

11 Sep 2006

5340-27-018-6695
Mounting Bracket

270186695
1010FK-2703828: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-017-4126
Mending Plate

270174126
98013335: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-024-6948
Bridge Clamp

270246948
2K206853: RNCC: 2 | RNVC: 1

26 Nov 2004

5340-27-018-8729
Handle Grip

270188729
11051YM0130: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-015-0392
Loop Clamp

270150392
7392326: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-054-0815
Mending Plate

270540815
98017779: RNCC: 2 | RNVC: 2

21 Jul 2011

5340-27-040-8643
Mending Plate

270408643
MB161776: RNCC: 2 | RNVC: 1

3 Apr 2008

5340-27-017-3654
Mending Plate

270173654
1009.1IS.0083-1: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-032-7356
Mounting Bracket

270327356
13D00-08095-AA: RNCC: 2 | RNVC: 1

13 Sep 2006

5340-27-027-1301
Flush Catch

270271301
10131YM2025: RNCC: 2 | RNVC: 1

7 Sep 2005

5340-27-024-5424
Mounting Bracket

270245424
1010FK-0000159: RNCC: 2 | RNVC: 1

11 Nov 2004

5340-27-010-2315
Access Cover

270102315
98003186: RNCC: 2 | RNVC: 1

16 Nov 2001

5340-27-013-4941
Mounting Bracket

270134941
53RS300180: RNCC: 2 | RNVC: 1

24 Jun 2002

5340-27-007-1162
Mortise Lock

270071162
206: RNCC: 2 | RNVC: 1
KILID, PANO: RNCC: 2 | RNVC: 1

17 Aug 1999

5340-27-038-6902
Mounting Bracket

270386902
10091YP0981: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-015-0369
Loop Clamp

270150369
7351807: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-038-7903
Handle Grip

270387903
2ABEP00340: RNCC: 2 | RNVC: 1

31 Oct 2007

5340-27-053-8947
Mending Plate

270538947
109739: RNCC: 3 | RNVC: 2

4 Jul 2011

5340-27-025-2790
Mounting Bracket

270252790
10131YB0686: RNCC: 2 | RNVC: 1

16 Feb 2005

5340-27-050-9660
Mounting Bracket

270509660
HS-22493-06: RNCC: 3 | RNVC: 2
HS-22493-06: RNCC: 3 | RNVC: 2
LSE262: RNCC: 5 | RNVC: 2
LSE262: RNCC: 5 | RNVC: 2

20 Sep 2010

5340-27-053-6858
Butt Hinge

270536858
C171-700030: RNCC: 3 | RNVC: 2

3 Jun 2011

5340-27-057-4661
Bow Handle

270574661
8200000945: RNCC: 2 | RNVC: 1

13 Aug 2012

5340-27-034-4930
Mounting Bracket

270344930
81DB16D030AA: RNCC: 2 | RNVC: 1

12 Jan 2007

5340-27-040-4332
Mounting Bracket

270404332
7084594: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-050-0697
Mending Plate

270500697
104442: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-032-7552
Mounting Bracket

270327552
13D00-56424-AB: RNCC: 2 | RNVC: 1

14 Sep 2006

5340-27-028-7547
Mounting Bracket

270287547
884-5810-937: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-054-5537
Mounting Bracket

270545537
98022425: RNCC: 3 | RNVC: 2

23 Sep 2011

5340-27-013-0974
Angle Bracket

270130974
81.97488.0154: RNCC: 2 | RNVC: 1

25 Apr 2002

5340-27-021-2009
Access Cover

270212009
1010FG-2205642: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-054-4833
Mounting Bracket

270544833
114E24: RNCC: 3 | RNVC: 2

19 Sep 2011

5340-27-056-0641
Flush Lock

270560641
UN.OS.01: RNCC: 2 | RNVC: 1

3 Feb 2012

5340-27-019-6223
Butt Hinge

270196223
05001HM0016: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-004-3212
Rod End Clevis

270043212
05001YC0008: RNCC: 3 | RNVC: 2

28 Aug 1995

5340-27-015-8032
Mounting Bracket

270158032
2106006314: RNCC: 2 | RNVC: 1

12 Dec 2002

5340-27-023-0874
Bow Handle

270230874
20415T: RNCC: 2 | RNVC: 1

27 May 2004

5340-27-015-0711
Rod End Clevis

270150711
7335793695: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-040-5664
Swivel Caster

270405664
09013DT0100: RNCC: 2 | RNVC: 1

30 Jan 2008

5340-27-025-9211
Hand Crank

270259211
1010FG-1800011: RNCC: 2 | RNVC: 1

3 May 2005

5340-27-010-4995
Access Cover

270104995
98011087: RNCC: 2 | RNVC: 1

27 Nov 2001

5340-27-028-7657
Mounting Bracket

270287657
884-5810-946: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-051-7501
Blank Panel

270517501
MP002804: RNCC: 3 | RNVC: 2

24 Nov 2010

5340-27-022-3488
Expansion Plug

270223488
10121YT5633: RNCC: 2 | RNVC: 1

26 Feb 2004

5340-27-047-8066
Mounting Bracket

270478066
13C01-72430-AA: RNCC: 2 | RNVC: 1

17 Dec 2009

5340-27-020-5546
Mounting Bracket

270205546
388883347101: RNCC: 2 | RNVC: 1

11 Dec 2003

5340-27-054-5909
Mending Plate

270545909
107011: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-017-6154
Mortise Lock

270176154
F99/60010: RNCC: 2 | RNVC: 1

1 Aug 2003

5340-27-017-3635
Mending Plate

270173635
1009.1IS.0068-A/13: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-048-3021
Swivel Caster

270483021
CDC125BT/W529U: RNCC: 2 | RNVC: 2
CDC125BT/W529U: RNCC: 2 | RNVC: 2

27 Jan 2010

5340-27-024-2298
Mortise Lock

270242298
150/A: RNCC: 2 | RNVC: 1

2 Oct 2004

5340-27-008-3344
Access Door Hinge

270083344
80C/5-7: RNCC: 2 | RNVC: 1

19 Sep 2000

5340-27-054-1330
Mounting Bracket

270541330
83A19-61850-AA: RNCC: 2 | RNVC: 1

28 Jul 2011

5340-27-048-7700
Mounting Bracket

270487700
9034-91: RNCC: 2 | RNVC: 1
9034-91: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-012-9428
Access Cover

270129428
98012719: RNCC: 2 | RNVC: 1

4 Mar 2003

5340-27-006-9169
Mounting Bracket

270069169
86GG A10806 BA: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-029-8682
Clamping Catch

270298682
006430: RNCC: 2 | RNVC: 1
006430: RNCC: 2 | RNVC: 1

1 Jun 2006

5340-27-038-4798
Mounting Bracket

270384798
40.6109.0000-903.00: RNCC: 2 | RNVC: 1
40.6109.0000-903.00: RNCC: 2 | RNVC: 1

9 Oct 2007

5340-27-051-4106
Mending Plate

270514106
107386: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-053-9699
Mending Plate

270539699
98017333: RNCC: 2 | RNVC: 2

12 Jul 2011

5340-27-006-9213
Mounting Bracket

270069213
91AG A10K667 BB: RNCC: 2 | RNVC: 1

25 Jun 1999

5340-27-004-7934
Access Cover

270047934
10091YP5076: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-029-1435
Dashpot

270291435
1323-44: RNCC: 2 | RNVC: 1

3 Mar 2006

5340-27-015-0365
Loop Clamp

270150365
7335932: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-052-7252
Mending Plate

270527252
90 45 800 32R: RNCC: 3 | RNVC: 2

18 Feb 2011

5340-27-040-6647
Mounting Bracket

270406647
1010006111: RNCC: 2 | RNVC: 1

21 Feb 2008

5340-27-042-0787
Catch Strike

270420787
34079: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-050-0578
Mending Plate

270500578
102840: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-029-0078
Mounting Bracket

270290078
10121YS5575: RNCC: 2 | RNVC: 1

22 Feb 2006

5340-27-006-9237
Mounting Bracket

270069237
92FG A61270 AA: RNCC: 2 | RNVC: 1

28 Jun 1999

5340-27-016-8159
Lever Bracket

270168159
8B81445: RNCC: 2 | RNVC: 1

17 Mar 2003

5340-27-022-5251
Mounting Bracket

270225251
10131YB0812: RNCC: 2 | RNVC: 1

19 Mar 2004

5340-27-033-6302
Mounting Bracket

270336302
40-205-3050: RNCC: 2 | RNVC: 1
40-205-3050: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-022-3951
Handle Grip

270223951
9BM 5340-00070: RNCC: 2 | RNVC: 1

5 Mar 2004

5340-27-044-0141
Mounting Bracket

270440141
5340-TJ-03327: RNCC: 2 | RNVC: 1

26 Dec 2008

5340-27-028-0773
Mending Plate

270280773
72A48-60112-AA: RNCC: 2 | RNVC: 1

29 Nov 2005

5340-27-021-1041
Access Cover

270211041
1010FG-1801290: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-6363
Mending Plate

270506363
377AC05: RNCC: 2 | RNVC: 1

12 Aug 2010

5340-27-036-8224
Hinge Torsion Bar

270368224
40.660.7642: RNCC: 2 | RNVC: 1
40.660.7642: RNCC: 2 | RNVC: 1

2 Jul 2007

5340-27-017-1300
Angle Bracket

270171300
300.01.00024: RNCC: 2 | RNVC: 1

16 May 2003

5340-27-028-7878
Mounting Bracket

270287878
40007883: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-056-7083
Mounting Bracket

270567083
ADOP-SHELTER-180-FOMK: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-056-7076
Mounting Bracket

270567076
ADOP-SHELTER-180-SKUB: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-009-0862
Mounting Bracket

270090862
98001225-2: RNCC: 2 | RNVC: 1

26 Apr 2001

5340-27-048-0537
Catch Strike

270480537
58RS508775: RNCC: 2 | RNVC: 1

30 Dec 2009

5340-27-049-4931
Mending Plate

270494931
107258: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-008-0123
Webbing Strap

270080123
30X1MM: RNCC: 2 | RNVC: 1

31 May 2002

5340-27-044-1019
Filler Opening Cap

270441019
250-04-02: RNCC: 2 | RNVC: 1

7 Jan 2009

5340-27-054-4225
Utility Access Door

270544225
PPK-01: RNCC: 2 | RNVC: 2

9 Sep 2011

5340-27-051-0895
Webbing Strap

270510895
TIP-3-C-1-TURUNCU-25X1.3: RNCC: 2 | RNVC: 1

30 Sep 2010

5340-27-057-2958
Mounting Bracket

270572958
TTAR-ALT-010214-HH-01: RNCC: 2 | RNVC: 1

13 Jul 2012

5340-27-028-2869
Mounting Bracket

270282869
1.HIBM-1I-2303D09: RNCC: 2 | RNVC: 1

19 Dec 2005

5340-27-015-7220
Flush Lock

270157220
10091KI0195: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-032-6826
Mounting Bracket

270326826
13D00-57176-AA: RNCC: 2 | RNVC: 1

7 Sep 2006

5340-27-001-7491
Door Hook And Eye

270017491
CESSNA 0411686: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-27-005-1453
Loop Clamp

270051453
1010000541: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-045-9313
Loop Clamp

270459313
78579550: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-050-3847
Mending Plate

270503847
101369: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-033-9115
Mounting Bracket

270339115
2ABEP00015: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-027-9330
Mounting Bracket

270279330
2.HIBM-95-0241-001: RNCC: 2 | RNVC: 1

18 Nov 2005

5340-27-056-9433
Bow Handle

270569433
CH01-01-047: RNCC: 2 | RNVC: 1

31 May 2012

5340-27-046-3900
Mending Plate

270463900
MTC3203-LD: RNCC: 2 | RNVC: 1

4 Aug 2009

5340-27-056-4632
Mending Plate

270564632
107312: RNCC: 2 | RNVC: 2

2 Apr 2012

5340-27-028-7761
Handle Grip

270287761
58RS103734: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-007-1761
Retaining Clip

270071761
W 700346 S300: RNCC: 2 | RNVC: 1

15 Sep 1999

5340-27-025-9068
Lock-Release Lever

270259068
R79851203: RNCC: 2 | RNVC: 1

2 May 2005

5340-27-025-8826
Filler Opening Cap

270258826
5009042645: RNCC: 2 | RNVC: 1

26 Apr 2005

5340-27-012-4571
Rod Retainer Clip

270124571
E 866103 S: RNCC: 2 | RNVC: 1

31 Jan 2002

Load More Results