What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 10 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 10 of 53

5340-27-024-3145
Loop Clamp

270243145
05001FK0204: RNCC: 2 | RNVC: 1
7S7680: RNCC: 2 | RNVC: 1

12 Oct 2004

5340-27-044-2898
Mending Plate

270442898
81.98181-0228: RNCC: 2 | RNVC: 1

22 Jan 2009

5340-27-032-6389
Angle Bracket

270326389
T570-G8000-200: RNCC: 2 | RNVC: 1

28 Aug 2006

5340-27-050-8496
Access Cover

270508496
62X-42610-30-4D: RNCC: 3 | RNVC: 2
62X-42610-30-4D: RNCC: 3 | RNVC: 2

3 Sep 2010

5340-27-048-3051
Mounting Bracket

270483051
73-3554-0132: RNCC: 2 | RNVC: 1

28 Jan 2010

5340-27-005-3367
Access Door Hinge

270053367
97K5A4026: RNCC: 2 | RNVC: 1

29 Jul 1997

5340-27-026-1649
Mounting Bracket

270261649
1010FG-1808639-1: RNCC: 2 | RNVC: 1

10 Jun 2005

5340-27-025-7861
Angle Bracket

270257861
5003580: RNCC: 2 | RNVC: 1

12 Apr 2005

5340-27-009-6372
Rod Retainer Clip

270096372
E864408S82: RNCC: 2 | RNVC: 1

8 Aug 2001

5340-27-022-9312
Angle Bracket

270229312
1010FG-0000404: RNCC: 2 | RNVC: 1

5 May 2004

5340-27-054-2709
Access Cover

270542709
AK-90900: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-049-3706
Utility Access Door

270493706
213X89X6 CM, CELIK KAPI: RNCC: 2 | RNVC: 1

27 Apr 2010

5340-27-056-3516
Access Cover

270563516
3833351: RNCC: 2 | RNVC: 2

16 Mar 2012

5340-27-045-9315
Loop Clamp

270459315
8D04470212059: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-005-1802
Flush Catch Claw

270051802
1010002159: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-27-029-8672
Bail Handle

270298672
002447: RNCC: 2 | RNVC: 1
002447: RNCC: 2 | RNVC: 1

1 Jun 2006

5340-27-017-3886
Mounting Bracket

270173886
1009.1IS.0088-2: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-055-8218
Sliding Door Track

270558218
V1C15V25004DF: RNCC: 2 | RNVC: 1

6 Jan 2012

5340-27-032-7488
Mounting Bracket

270327488
13C01-36928-AA: RNCC: 2 | RNVC: 1

14 Sep 2006

5340-27-037-6297
Roller Holder

270376297
83A15-35508-AA: RNCC: 2 | RNVC: 1

13 Aug 2007

5340-27-018-2869
Access Cover

270182869
98013988: RNCC: 2 | RNVC: 1

14 Nov 2003

5340-27-020-1328
Bridge Clamp

270201328
7700503447: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-1057
Mounting Bracket

270581057
98011660: RNCC: 2 | RNVC: 1

10 Dec 2012

5340-27-023-3306
Handle Grip

270233306
2540TMAK9880002: RNCC: 2 | RNVC: 1

19 Jun 2004

5340-27-011-2434
Butt Hinge

270112434
07002YM0306: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-058-3625
Mending Plate

270583625
CV60600: RNCC: 2 | RNVC: 1

16 Jan 2013

5340-27-009-0326
Mounting Bracket

270090326
98000594: RNCC: 2 | RNVC: 1

5 Apr 2001

5340-27-056-6166
Mortise Lock

270566166
164 GNC 00098: RNCC: 5 | RNVC: 9

17 Apr 2012

5340-27-039-6142
Mounting Bracket

270396142
YTE.190.EM.002.015: RNCC: 2 | RNVC: 1

10 Dec 2007

5340-27-022-1241
Pad Eye

270221241
34975: RNCC: 2 | RNVC: 1

12 Feb 2004

5340-27-022-5459
Expansion Shield

270225459
M12AS5: RNCC: 2 | RNVC: 1

20 Mar 2004

5340-27-016-6352
Mounting Bracket

270166352
98013029: RNCC: 2 | RNVC: 1

20 Feb 2003

5340-27-045-7693
Angle Bracket

270457693
10029216: RNCC: 2 | RNVC: 1

11 Jun 2009

5340-27-022-0399
Mounting Bracket

270220399
1009 1IS 0068A-13: RNCC: 2 | RNVC: 1

28 Jan 2004

5340-27-050-6933
Lock-Release Lever

270506933
8F31574101: RNCC: 5 | RNVC: 1

19 Aug 2010

5340-27-023-8759
Rod End Clevis

270238759
7.04.04.06: RNCC: 2 | RNVC: 1

13 Aug 2004

5340-27-006-6989
Elbow Catch

270066989
2K12448: RNCC: 2 | RNVC: 1

18 Mar 1999

5340-27-050-0586
Mending Plate

270500586
102877: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-050-0357
Access Cover

270500357
AR534T153000000: RNCC: 2 | RNVC: 1

18 Jun 2010

5340-27-053-4928
Bumper

270534928
H342403501: RNCC: 2 | RNVC: 1

12 May 2011

5340-27-057-5724
Mounting Bracket

270575724
100201: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-028-7996
Loop Clamp

270287996
71A70-76934-AA: RNCC: 2 | RNVC: 1

8 Feb 2006

5340-27-045-5323
Mounting Bracket

270455323
K2C 3034 -: RNCC: 3 | RNVC: 2

13 May 2009

5340-27-037-2270
Mortise Lock

270372270
203: RNCC: 5 | RNVC: 9

18 Jul 2007

5340-27-024-4861
Rod End Clevis

270244861
1009 1YC 0014: RNCC: 2 | RNVC: 1

4 Nov 2004

5340-27-053-1520
Catch Strike

270531520
898108913051: RNCC: 2 | RNVC: 1

4 Apr 2011

5340-27-013-0819
Angle Bracket

270130819
10131YS0804: RNCC: 2 | RNVC: 1

19 Apr 2002

5340-27-054-5798
Mounting Bracket

270545798
C01AR31: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-025-4901
Rod End Clevis

270254901
2ABM 1MK 0057: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-015-0416
Loop Clamp

270150416
7724765: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-020-9374
Mounting Bracket

270209374
1009.1KI.0264-2*1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-019-4980
Bail Handle

270194980
ZNR23115P4: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-032-7518
Mounting Bracket

270327518
13C01-38080-AA: RNCC: 2 | RNVC: 1

14 Sep 2006

5340-27-008-6244
Handle Grip

270086244
98005152: RNCC: 2 | RNVC: 1

1 Dec 2000

5340-27-034-6106
Mounting Bracket

270346106
336E38: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-046-8382
Flush Catch Claw

270468382
4/283: RNCC: 2 | RNVC: 1

15 Oct 2009

5340-27-033-6703
Bow Handle

270336703
MUC1479: RNCC: 2 | RNVC: 1

10 Nov 2006

5340-27-059-2653
Mending Plate

270592653
98023175: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-026-2008
Mounting Bracket

270262008
06 08 521 105: RNCC: 2 | RNVC: 1

16 Jun 2005

5340-27-023-5432
Webbing Strap

270235432
8690542: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-054-1750
Mending Plate

270541750
98019374: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-049-4882
Mending Plate

270494882
107857: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-053-1479
Expansion Plug

270531479
E851100S: RNCC: 2 | RNVC: 1

4 Apr 2011

5340-27-026-3302
Mechanical Stop

270263302
06442: RNCC: 2 | RNVC: 1

29 Jun 2005

5340-27-014-3693
Catch Strike

270143693
2T14 K62453 AD: RNCC: 2 | RNVC: 1

9 Oct 2002

5340-27-015-7303
Butt Hinge

270157303
16001DM0168: RNCC: 2 | RNVC: 1
100MM KAPI/PENCERE MENTESE: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-019-5450
Access Cover

270195450
07002YK0303: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-020-6304
Mounting Bracket

270206304
1009.1KI.0220-11*2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-1490
Loop Clamp

270051490
1010000586: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-005-1507
Loop Clamp

270051507
1010001821: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-004-7989
Access Cover

270047989
10091YK5153: RNCC: 3 | RNVC: 2

6 Nov 1996

5340-27-054-6793
Mounting Bracket

270546793
55RS752939: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-012-8658
Access Cover

270128658
98012741: RNCC: 2 | RNVC: 1

28 Mar 2002

5340-27-055-4072
Bow Handle

270554072
5080291: RNCC: 2 | RNVC: 2

5 Dec 2011

5340-27-058-8944
Loop Clamp

270588944
901-KE-254: RNCC: 2 | RNVC: 1

26 Apr 2013

5340-27-018-6522
Mounting Bracket

270186522
1010FG-0613801: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-013-3105
Mending Plate

270133105
88.94502.2051: RNCC: 2 | RNVC: 1

29 May 2002

5340-27-016-7559
Handle Grip

270167559
8B100428: RNCC: 2 | RNVC: 1

11 Mar 2003

5340-27-049-6552
Mounting Bracket

270496552
72A12-60028-AA: RNCC: 2 | RNVC: 1

17 May 2010

5340-27-056-5319
Access Cover

270565319
3835027: RNCC: 2 | RNVC: 2

9 Apr 2012

5340-27-004-5530
Loop Clamp

270045530
10091YK5047: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-059-2703
Mounting Bracket

270592703
55RS351015: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-005-1489
Loop Clamp

270051489
1010000561: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-040-2842
Angle Bracket

270402842
Y535-75002-214: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-021-4018
Mounting Bracket

270214018
1012.1HSCA.09-09: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-7657
Mounting Bracket

270597657
9999-0000-0344: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-043-2564
Mounting Bracket

270432564
3000-1570: RNCC: 2 | RNVC: 1

22 Oct 2008

5340-27-057-9564
Mending Plate

270579564
36620-ZY3-000: RNCC: 2 | RNVC: 1

22 Nov 2012

5340-27-020-8907
Mounting Bracket

270208907
1010-1YH-0033: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-7871
Loop Clamp

270287871
72A22-16816-AA: RNCC: 2 | RNVC: 1

7 Feb 2006

5340-27-027-2572
Angle Bracket

270272572
15-01-402-003: RNCC: 2 | RNVC: 1

21 Sep 2005

5340-27-004-6985
Mounting Bracket

270046985
1.HIBM-1I-1517: RNCC: 2 | RNVC: 1

21 Sep 1996

5340-27-001-2948
Loop Clamp

270012948
205-030-379-019: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-050-7263
Mounting Bracket

270507263
79C00-73010-AA: RNCC: 2 | RNVC: 1

23 Aug 2010

5340-27-038-8584
Mounting Bracket

270388584
2ABEP00350: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-018-7136
Mounting Bracket

270187136
1010FK-2702133: RNCC: 2 | RNVC: 1
1010FK-2702133: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-056-7060
Mounting Bracket

270567060
ADOP-SHELTER-180-HMK: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-051-4108
Mending Plate

270514108
107996: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-021-3535
Bail Handle

270213535
15001-MK-2016: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-001-7450
Mechanical Stop

270017450
TM55-1520-210-2205-001-105-1: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-020-9494
Mending Plate

270209494
1010FG-0000717: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-8458
Flush Catch Claw

270538458
C171-000050: RNCC: 2 | RNVC: 2

28 Jun 2011

5340-27-056-8664
Mending Plate

270568664
203393: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-021-1080
Angle Bracket

270211080
A-3474-00: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-026-9232
Angle Bracket

270269232
240-070-255-1: RNCC: 2 | RNVC: 1

9 Aug 2005

5340-27-036-6794
Mending Plate

270366794
83A11-55436-AB: RNCC: 2 | RNVC: 1
83A11-55436-AA: RNCC: 2 | RNVC: 1

19 Jun 2007

5340-27-017-3885
Mounting Bracket

270173885
1009.1IS.0073-30: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-4824
Flush Catch

270214824
TR-0110: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-059-6454
Loop Clamp

270596454
901-KL-328: RNCC: 2 | RNVC: 1

23 Sep 2013

5340-27-050-9910
Locking Stay

270509910
6H4-81952-00: RNCC: 3 | RNVC: 2
6H4-81952-00: RNCC: 3 | RNVC: 2

22 Sep 2010

5340-27-048-8326
Sliding Door Track

270488326
893291057351: RNCC: 2 | RNVC: 1

8 Mar 2010

5340-27-021-3094
Mending Plate

270213094
1012.1HSCA.02-15: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-024-1977
Snap Hook

270241977
1010FG-1831166: RNCC: 2 | RNVC: 1

29 Sep 2004

5340-27-051-8143
Catch Strike

270518143
7T16 16K689-AA: RNCC: 2 | RNVC: 1

30 Nov 2010

5340-27-020-1728
Bridge Clamp

270201728
7700759875: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-041-4150
Utility Access Door

270414150
145X145 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-056-9310
Mending Plate

270569310
901-AT-412-A310C: RNCC: 2 | RNVC: 1

31 May 2012

5340-27-051-6338
Mounting Bracket

270516338
3EC-13-11330: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-27-028-7614
Mounting Bracket

270287614
884-5810-975: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-054-1554
Loop Holder

270541554
40-005.00/10-127: RNCC: 2 | RNVC: 1

2 Aug 2011

5340-27-021-0341
Mounting Bracket

270210341
1009.1KI.0353-8: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-0204
Mending Plate

270580204
203530: RNCC: 2 | RNVC: 1

30 Nov 2012

5340-27-054-9787
Bow Handle

270549787
72C09-62126-AA: RNCC: 2 | RNVC: 1

26 Oct 2011

5340-27-043-1403
Mending Plate

270431403
74A05-62223-AA: RNCC: 2 | RNVC: 1

15 Oct 2008

5340-27-058-5208
Access Cover

270585208
VOE12742229: RNCC: 3 | RNVC: 2
VOE12742229: RNCC: 3 | RNVC: 2

18 Feb 2013

5340-27-042-0771
Bow Handle

270420771
5337: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-021-0336
Mounting Bracket

270210336
1009.1KI.0353-17: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-039-8068
Loop Holder

270398068
A-3 EBAT: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-032-4656
Hand Crank

270324656
450-4-14-14-8: RNCC: 2 | RNVC: 1

19 Jul 2006

5340-27-059-2763
Mending Plate

270592763
10 V02 150 00: RNCC: 5 | RNVC: 9

3 Jul 2013

5340-27-044-0089
Mounting Bracket

270440089
5340-TJ-03323: RNCC: 2 | RNVC: 1

26 Dec 2008

5340-27-024-9107
Loop Clamp

270249107
3757598: RNCC: 2 | RNVC: 1

16 Dec 2004

5340-27-056-4800
Mending Plate

270564800
202156: RNCC: 2 | RNVC: 2

3 Apr 2012

5340-27-044-4687
Mounting Bracket

270444687
72A33-01715-AA: RNCC: 2 | RNVC: 1

10 Feb 2009

5340-27-050-9494
Access Cover

270509494
HS-22133-22: RNCC: 3 | RNVC: 2
HS-22133-22: RNCC: 3 | RNVC: 2

17 Sep 2010

5340-27-056-6627
Mounting Bracket

270566627
MM-7412-0058: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-034-6113
Mounting Bracket

270346113
101E71: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-005-9504
Loop Clamp

270059504
2K10183: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-017-3663
Mending Plate

270173663
1009.1IS.0088-4: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-0345
Mounting Bracket

270210345
1009.1KI.0353-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-025-3627
Expansion Shield

270253627
372069: RNCC: 2 | RNVC: 1
HKD-S M12X50: RNCC: 5 | RNVC: 9

7 Mar 2005

5340-27-048-0337
Mending Plate

270480337
S-002: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-005-2886
Access Door Hinge

270052886
TI001-5: RNCC: 3 | RNVC: 2

8 May 1997

5340-27-052-2002
Bridge Clamp

270522002
8.216.000.353.0: RNCC: 3 | RNVC: 2

24 Dec 2010

5340-27-053-9221
Mending Plate

270539221
109865: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-27-045-0590
Mounting Bracket

270450590
12E00-57181-AA: RNCC: 2 | RNVC: 1

2 Apr 2009

5340-27-039-1707
Mending Plate

270391707
83A24-73299-AA: RNCC: 2 | RNVC: 1

15 Nov 2007

5340-27-059-6495
Loop Clamp

270596495
901-KL-334: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-001-7587
Loop Clamp

270017587
TM55-1520-210-3EAB700-D34: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-059-6553
Loop Clamp

270596553
901-KL-362: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-021-1727
Access Cover

270211727
1010FK-2811101: RNCC: 2 | RNVC: 1
1010FK-2811101: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-051-7421
Mending Plate

270517421
1177119: RNCC: 3 | RNVC: 2

24 Nov 2010

5340-27-059-0308
Loop Clamp

270590308
VOE952632: RNCC: 3 | RNVC: 2
VOE952632: RNCC: 3 | RNVC: 2

17 May 2013

5340-27-005-1707
Access Cover

270051707
1010001452: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-049-5353
Mounting Bracket

270495353
140610-000-0: RNCC: 2 | RNVC: 1

6 May 2010

5340-27-055-2586
Utility Access Door

270552586
UG 012000 POZ-20: RNCC: 2 | RNVC: 1
UG 012000 POZ-20: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-032-7791
Mounting Bracket

270327791
13C00-07029-AA: RNCC: 2 | RNVC: 1

15 Sep 2006

5340-27-040-2845
Angle Bracket

270402845
Y535-75002-434: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-039-4603
Mounting Bracket

270394603
F-2561-10: RNCC: 2 | RNVC: 1

3 Dec 2007

5340-27-007-3544
Retaining Clip

270073544
W 701131 S300: RNCC: 2 | RNVC: 1

25 Oct 1999

5340-27-038-1088
Mounting Bracket

270381088
044-03-010: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-048-6703
Bridge Clamp

270486703
81.97640-0213: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-27-039-3459
Mounting Bracket

270393459
F-2561-21-2: RNCC: 2 | RNVC: 1

27 Nov 2007

5340-27-023-1299
Mounting Bracket

270231299
1010FK-2703827: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-055-3589
Mounting Bracket

270553589
5093287: RNCC: 2 | RNVC: 2
5093287: RNCC: 5 | RNVC: 9

1 Dec 2011

5340-27-013-7968
Expansion Plug

270137968
W704452 S300: RNCC: 2 | RNVC: 1

24 Jul 2002

5340-27-053-1009
Mounting Bracket

270531009
2.HIBM-4H-0666/1-A7: RNCC: 2 | RNVC: 1

28 Mar 2011

5340-27-007-1829
Access Cover

270071829
E 852083 S: RNCC: 2 | RNVC: 1

16 Sep 1999

5340-27-055-2823
Sliding Door Track

270552823
H346052502: RNCC: 2 | RNVC: 1

28 Nov 2011

5340-27-057-0568
Sliding Door Track

270570568
7T16V25005AB: RNCC: 2 | RNVC: 1

13 Jun 2012

5340-27-033-6400
Access Cover

270336400
901-GK-33: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-021-4088
Mounting Bracket

270214088
1009.1KI.0337-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-9478
Lock-Release Lever

270289478
5340KK0011055: RNCC: 2 | RNVC: 1

17 Feb 2006

5340-27-023-8426
Rod End Clevis

270238426
7.04.04.03: RNCC: 2 | RNVC: 1

12 Aug 2004

5340-27-020-7544
Mounting Bracket

270207544
1009.1KI.0105-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-032-8525
Bow Handle

270328525
DOLAP/CEKMECE KULPU,100MM: RNCC: 2 | RNVC: 1

22 Sep 2006

5340-27-014-9274
Caster Wheel

270149274
2630-31968-00014: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-051-1256
Lock-Release Lever

270511256
101815: RNCC: 3 | RNVC: 2

4 Oct 2010

5340-27-012-9430
Access Cover

270129430
98012719-9: RNCC: 2 | RNVC: 1

3 Apr 2002

5340-27-057-9375
Butt Hinge

270579375
1010FMA-3505053: RNCC: 2 | RNVC: 1

19 Nov 2012

5340-27-007-3954
Retaining Strap

270073954
E 863025 S: RNCC: 2 | RNVC: 1
17970: RNCC: 2 | RNVC: 1
23659-40010G: RNCC: 2 | RNVC: 1

2 Nov 1999

5340-27-020-7573
Mending Plate

270207573
1009.1KI.0179-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-6403
Angle Bracket

270056403
92VT-V508A16-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-041-4705
Mounting Bracket

270414705
GU1M40020A-CGLT: RNCC: 2 | RNVC: 1

27 May 2008

5340-27-055-3392
Mounting Bracket

270553392
1692-0182: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-059-2646
Mounting Bracket

270592646
55RS752975: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-040-5234
Mounting Bracket

270405234
7364838: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-048-7365
Loop Clamp

270487365
7291-18: RNCC: 2 | RNVC: 1
7291-18: RNCC: 5 | RNVC: 9

24 Feb 2010

5340-27-021-0452
Bridge Clamp

270210452
07002YK0382: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3754
Recess Handle

270173754
1009.1IS.0052-5: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-028-7532
Mounting Bracket

270287532
884-5810-934: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-019-6401
Webbing Strap

270196401
05001HK0121: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-046-7721
Hand Crank

270467721
11531705: RNCC: 3 | RNVC: 2

7 Oct 2009

5340-27-060-0402
Mounting Bracket

270600402
MM-7490-0133: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-015-8164
Bridge Clamp

270158164
1013.111.74: RNCC: 2 | RNVC: 1

16 Dec 2002

5340-27-050-5114
Bridge Clamp

270505114
DIN-3016-1-D1-20-15-W3-CR: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-016-8083
Angle Bracket

270168083
1.HIBM-1N-129: RNCC: 2 | RNVC: 1

14 Mar 2003

5340-27-020-2180
Angle Bracket

270202180
205-030-09-39: RNCC: 2 | RNVC: 1

18 Nov 2003

5340-27-040-4522
Mounting Bracket

270404522
8698868: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-050-0733
Mending Plate

270500733
108277: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-050-1561
Mending Plate

270501561
107411: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-008-8541
Mounting Bracket

270088541
98005319: RNCC: 2 | RNVC: 1

2 Feb 2001

5340-27-027-5279
Mounting Bracket

270275279
72B13-73224-AA: RNCC: 2 | RNVC: 1

10 Oct 2005

5340-27-052-7292
Mending Plate

270527292
10046609: RNCC: 2 | RNVC: 1

18 Feb 2011

5340-27-027-5506
Bow Handle

270275506
81.97001.0525: RNCC: 2 | RNVC: 1

11 Oct 2005

5340-27-037-6830
Loop Clamp

270376830
13C25-80782-AA: RNCC: 2 | RNVC: 1

20 Aug 2007

5340-27-013-3418
Bow Handle

270133418
81.06201.5123: RNCC: 2 | RNVC: 1

5 Jun 2002

5340-27-050-3545
Mending Plate

270503545
301AH88: RNCC: 3 | RNVC: 2

20 Jul 2010

5340-27-014-0835
Bridge Clamp

270140835
KELEPCE: RNCC: 2 | RNVC: 1
KAS-502: RNCC: 2 | RNVC: 1
GM KK 275 MM: RNCC: 2 | RNVC: 1

9 Sep 2002

5340-27-055-2774
Mortise Lock Set

270552774
GOMME KILIT SETI 240: RNCC: 5 | RNVC: 9

28 Nov 2011

5340-27-042-7126
Webbing Strap

270427126
KOLONSARI25MM: RNCC: 2 | RNVC: 1
KOLONSARI25MM: RNCC: 3 | RNVC: 2

8 Sep 2008

5340-27-032-6376
Mounting Bracket

270326376
T532-G4000-320: RNCC: 2 | RNVC: 1

28 Aug 2006

5340-27-044-1474
Angle Bracket

270441474
AMJP24H15: RNCC: 2 | RNVC: 1

12 Jan 2009

5340-27-057-9876
Mounting Bracket

270579876
32419-ZY3-A00: RNCC: 2 | RNVC: 1

27 Nov 2012

5340-27-059-2579
Angle Bracket

270592579
CM012018-03: RNCC: 2 | RNVC: 1

1 Jul 2013

5340-27-038-8791
Access Cover

270388791
1010FG-0800615: RNCC: 2 | RNVC: 1

2 Nov 2007

5340-27-020-8884
Mending Plate

270208884
1010FG-0000430: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-004-7936
Access Cover

270047936
10091YK5091: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-054-7676
Handle Grip

270547676
C70AA07: RNCC: 3 | RNVC: 2

13 Oct 2011

5340-27-011-0669
Strap Hinge Leaf

270110669
7115311124: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-050-0572
Mending Plate

270500572
102833: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-022-7184
Butt Hinge

270227184
39270: RNCC: 2 | RNVC: 1

10 Apr 2004

5340-27-015-0467
Angle Bracket

270150467
1010FG-1831005: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-021-7166
Lever Bracket

270217166
1009 1YS 0212: RNCC: 2 | RNVC: 1

25 Dec 2003

5340-27-022-5167
Bridge Clamp

270225167
53131KR8000: RNCC: 2 | RNVC: 1
53131KR8000: RNCC: 5 | RNVC: 9

18 Mar 2004

5340-27-007-3973
Mounting Bracket

270073973
95AG A02525 AB: RNCC: 2 | RNVC: 1

3 Nov 1999

5340-27-049-9678
Mending Plate

270499678
HD110566X: RNCC: 2 | RNVC: 2
HD110566X: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-019-5315
Angle Bracket

270195315
07002YK1154: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-006-9400
Mounting Bracket

270069400
95AG A10461 AB: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-054-5912
Mending Plate

270545912
107018: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-021-3080
Mending Plate

270213080
1012.1HSCA.09-08: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-047-8733
Mounting Bracket

270478733
13D00-68006-AA: RNCC: 2 | RNVC: 1

21 Dec 2009

5340-27-016-9242
Support Hook

270169242
8AT.0300.063: RNCC: 2 | RNVC: 1

11 Apr 2003

5340-27-047-8671
Butt Hinge

270478671
13E00-57350-AB: RNCC: 2 | RNVC: 1

21 Dec 2009

5340-27-021-4163
Angle Bracket

270214163
1010FG-1801067: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-1377
Catch Strike

270281377
5510-AB: RNCC: 2 | RNVC: 1

6 Dec 2005

5340-27-004-7907
Access Cover

270047907
10091YK5082: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-022-3969
Mounting Bracket

270223969
10131YS0818: RNCC: 2 | RNVC: 1

5 Mar 2004

5340-27-006-9235
Mounting Bracket

270069235
91AG A3B743 AD: RNCC: 2 | RNVC: 1

28 Jun 1999

5340-27-049-8483
Mending Plate

270498483
108586: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-014-8139
Mending Plate

270148139
7700681260: RNCC: 2 | RNVC: 1

3 Dec 2002

5340-27-025-3220
Mounting Bracket

270253220
1010FG-0612227: RNCC: 2 | RNVC: 1

24 Feb 2005

5340-27-004-7891
Access Cover

270047891
10091YK5069: RNCC: 3 | RNVC: 2

5 Nov 1996

5340-27-021-1724
Access Cover

270211724
1010FK-3506007: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-022-0882
Flush Catch

270220882
C040 0111-003A3: RNCC: 2 | RNVC: 1

9 Feb 2004

5340-27-049-4923
Mending Plate

270494923
107461: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-054-6662
Mounting Bracket

270546662
55RS753000: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-054-4509
Flush Catch

270544509
5B70010: RNCC: 3 | RNVC: 2

13 Sep 2011

5340-27-036-7137
Flush Catch

270367137
YBCA1514: RNCC: 2 | RNVC: 1

20 Jun 2007

5340-27-059-0212
Loop Clamp

270590212
BY0346498: RNCC: 2 | RNVC: 1

16 May 2013

5340-27-040-8634
Mending Plate

270408634
ML103115: RNCC: 2 | RNVC: 1

3 Apr 2008

5340-27-023-1437
Expansion Plug

270231437
10121YT5651: RNCC: 2 | RNVC: 1
01927: RNCC: 2 | RNVC: 1

1 Jun 2004

5340-27-053-4763
Mechanical Stop

270534763
H341217301: RNCC: 2 | RNVC: 1

11 May 2011

5340-27-028-1376
Mending Plate

270281376
71B21-60960-AA: RNCC: 2 | RNVC: 1

6 Dec 2005

5340-27-001-8061
Butt Hinge

270018061
CESSNA-185-PARTS1426-2: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-044-1256
Mounting Bracket

270441256
12E00-55342-AB: RNCC: 2 | RNVC: 1

9 Jan 2009

5340-27-048-5325
Bow Handle

270485325
HD205314Y: RNCC: 3 | RNVC: 2

15 Feb 2010

5340-27-056-7062
Mounting Bracket

270567062
ADOP-SHELTER-180-JSUB: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-039-7300
Bow Handle

270397300
7372348: RNCC: 2 | RNVC: 1

17 Dec 2007

5340-27-056-3971
Access Cover

270563971
3835012: RNCC: 3 | RNVC: 2
3835012: RNCC: 3 | RNVC: 2

23 Mar 2012

5340-27-029-8387
Bow Handle

270298387
713808633: RNCC: 2 | RNVC: 1

29 May 2006

5340-27-056-4806
Mending Plate

270564806
202242: RNCC: 2 | RNVC: 2

3 Apr 2012

5340-27-051-5523
Mortise Lock

270515523
103251: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-27-041-4152
Utility Access Door

270414152
146X143 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-053-2115
Mounting Bracket

270532115
897378943051: RNCC: 2 | RNVC: 1

8 Apr 2011

5340-27-051-5613
Mending Plate

270515613
108695: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-27-021-6670
Bow Handle

270216670
740X700: RNCC: 2 | RNVC: 1
320-1030: RNCC: 5 | RNVC: 2

22 Dec 2003

5340-27-059-6813
Loop Clamp

270596813
901-KL-394: RNCC: 2 | RNVC: 1

26 Sep 2013

5340-27-050-5111
Bridge Clamp

270505111
DIN3016-1-D1-11-15-W3-CR: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-27-021-5363
Mending Plate

270215363
1010FG-0000635: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-021-3083
Mending Plate

270213083
1012.1HSCA.10-03: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-6376
Access Cover

270486376
7673-12: RNCC: 2 | RNVC: 1
7673-12: RNCC: 5 | RNVC: 9

17 Feb 2010

5340-27-054-6599
Mending Plate

270546599
98021360: RNCC: 3 | RNVC: 2

5 Oct 2011

5340-27-012-0870
Loop Clamp

270120870
E863263 S71: RNCC: 2 | RNVC: 1
3757597: RNCC: 2 | RNVC: 1

11 Jan 2002

5340-27-048-9633
Mending Plate

270489633
103663: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-032-2306
Angle Bracket

270322306
209-001-517-1: RNCC: 2 | RNVC: 1

9 Jun 2006

5340-27-035-6065
Mending Plate

270356065
72A82-61394-AA: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-059-2887
Mounting Bracket

270592887
CM012018-34: RNCC: 2 | RNVC: 1

8 Jul 2013

5340-27-024-3098
Mounting Bracket

270243098
1010FK-0000247: RNCC: 2 | RNVC: 1

9 Oct 2004

5340-27-041-4579
Mounting Bracket

270414579
901-MA-151: RNCC: 2 | RNVC: 1

26 May 2008

5340-27-028-7782
Mounting Bracket

270287782
884-5800-997: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-042-7335
Mortise Lock

270427335
DOLAP KILIDI,55MM: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-051-0994
Plug Button

270510994
901-TA-335: RNCC: 2 | RNVC: 1

1 Oct 2010

5340-27-022-0229
Pad Eye

270220229
1009 1KI 0231/1-18: RNCC: 2 | RNVC: 1

26 Jan 2004

5340-27-020-8974
Mounting Bracket

270208974
1009.1KI.0030/1-3: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-006-8716
Rod End Clevis

270068716
062000418: RNCC: 2 | RNVC: 1

1 Jun 1999

5340-27-058-5379
Mending Plate

270585379
98023529: RNCC: 2 | RNVC: 1

19 Feb 2013

5340-27-007-3761
Retaining Clip

270073761
W 701059 S300: RNCC: 2 | RNVC: 1

27 Oct 1999

5340-27-044-9716
Flush Catch

270449716
02008-TRS-10-0200-04: RNCC: 3 | RNVC: 2

24 Mar 2009

5340-27-034-1052
Mounting Bracket

270341052
13D05-66044-AA: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-016-7419
Mortise Lock

270167419
217.300: RNCC: 2 | RNVC: 1

10 Mar 2003

5340-27-059-6629
Loop Clamp

270596629
901-KL-370: RNCC: 2 | RNVC: 1

24 Sep 2013

5340-27-033-6562
Access Cover

270336562
40-205-5040: RNCC: 2 | RNVC: 1
40-205-5040: RNCC: 2 | RNVC: 1

9 Nov 2006

5340-27-021-5311
Mending Plate

270215311
1010FG-0000636: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-013-6613
Mounting Bracket

270136613
7240-77777-00005: RNCC: 2 | RNVC: 1

10 Jul 2002

5340-27-048-0392
Mounting Bracket

270480392
SKN-42: RNCC: 3 | RNVC: 2

29 Dec 2009

5340-27-020-7838
Mending Plate

270207838
1009.1KI.0129-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-032-6491
T Bracket

270326491
40-660-7670: RNCC: 2 | RNVC: 1
40-660-7670: RNCC: 2 | RNVC: 1

29 Aug 2006

5340-27-014-1811
Mending Plate

270141811
388886730001: RNCC: 2 | RNVC: 1

20 Sep 2002

5340-27-027-0497
Compression Cup

270270497
11051YK0268: RNCC: 2 | RNVC: 1

29 Aug 2005

5340-27-013-1990
Mending Plate

270131990
81.67540.5048: RNCC: 2 | RNVC: 1

13 May 2002

5340-27-026-1793
Mending Plate

270261793
2011.5111.008: RNCC: 2 | RNVC: 1

14 Jun 2005

5340-27-055-0923
Lock-Release Lever

270550923
691000-6328: RNCC: 2 | RNVC: 2

3 Nov 2011

5340-27-045-7498
Utility Access Door

270457498
GDR-0044: RNCC: 2 | RNVC: 2

10 Jun 2009

5340-27-032-2869
Swivel Caster

270322869
T950564: RNCC: 2 | RNVC: 1

14 Jun 2006

5340-27-048-9653
Mending Plate

270489653
103694: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-035-6130
Sliding Door Track

270356130
72A82-61146-AA: RNCC: 2 | RNVC: 1

21 Mar 2007

5340-27-007-3622
Retaining Clip

270073622
W 701295 S301: RNCC: 2 | RNVC: 1

26 Oct 1999

5340-27-004-5139
Access Cover

270045139
10121YK5414: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-021-2873
Hook Handle

270212873
1009.1KI.0306-8: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-050-1568
Mending Plate

270501568
107422: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-040-2802
Bow Handle

270402802
8200035038: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-021-3104
Mending Plate

270213104
1012.1HSCA.02-66: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-005-1450
Loop Clamp

270051450
1010000470: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-010-2839
Angle Bracket

270102839
10131YS0788: RNCC: 2 | RNVC: 1

22 Nov 2001

5340-27-041-4353
Mending Plate

270414353
28863: RNCC: 2 | RNVC: 1

23 May 2008

5340-27-055-7859
Access Cover

270557859
5120760: RNCC: 2 | RNVC: 2

4 Jan 2012

5340-27-053-9925
Mending Plate

270539925
98014947: RNCC: 2 | RNVC: 2

14 Jul 2011

5340-27-024-3358
Rod End Clevis

270243358
05001FC0021: RNCC: 2 | RNVC: 1

13 Oct 2004

5340-27-053-3678
Mounting Bracket

270533678
H341148602: RNCC: 2 | RNVC: 1

25 Apr 2011

5340-27-059-9932
Mending Plate

270599932
10028866: RNCC: 2 | RNVC: 1

23 Dec 2013

5340-27-056-8669
Mending Plate

270568669
202265: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-054-2046
Mending Plate

270542046
98019046: RNCC: 2 | RNVC: 2

8 Aug 2011

5340-27-006-1899
Access Cover

270061899
KAL3044: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-034-8337
Flush Catch

270348337
13224357: RNCC: 2 | RNVC: 1

9 Feb 2007

5340-27-055-7275
Mending Plate

270557275
5122225: RNCC: 2 | RNVC: 2

30 Dec 2011

5340-27-016-5069
Mending Plate

270165069
81.97487.0267: RNCC: 2 | RNVC: 1

30 Jan 2003

5340-27-035-6951
Angle Bracket

270356951
51735604: RNCC: 2 | RNVC: 1

26 Mar 2007

5340-27-011-0704
Mechanical Stop

270110704
7115311021: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-055-8793
Mortise Lock Set

270558793
7701209782: RNCC: 2 | RNVC: 2

12 Jan 2012

5340-27-044-6174
Mounting Bracket

270446174
Y533-72006-000: RNCC: 2 | RNVC: 1

23 Feb 2009

5340-27-058-9828
Butt Hinge

270589828
SHN-31: RNCC: 5 | RNVC: 9

10 May 2013

5340-27-005-8834
Access Cover

270058834
8K19754: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-025-2976
Mounting Bracket

270252976
10131YS0643: RNCC: 2 | RNVC: 1

22 Feb 2005

5340-27-056-8634
Mending Plate

270568634
202862: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-050-0580
Mending Plate

270500580
102847: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-058-9385
Mending Plate

270589385
VOE12746887: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-028-3956
Catch Strike

270283956
7700310536: RNCC: 2 | RNVC: 1

28 Dec 2005

5340-27-058-1067
Bridge Clamp

270581067
A820X8287HA02: RNCC: 2 | RNVC: 1

10 Dec 2012

5340-27-050-0695
Mending Plate

270500695
104441: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-056-8646
Mending Plate

270568646
203299: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-016-5892
Catch Strike

270165892
8B100416: RNCC: 2 | RNVC: 1

5 Jan 2004

5340-27-029-8210
Mending Plate

270298210
5PS-11165-00-00: RNCC: 2 | RNVC: 1

25 May 2006

5340-27-048-7683
Catch Strike

270487683
9035-51: RNCC: 2 | RNVC: 1
9035-51: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-028-6115
Bridge Clamp

270286115
MM-7450-0096-KNM10: RNCC: 2 | RNVC: 1

22 Jan 2006

5340-27-005-1456
Loop Clamp

270051456
1010000707: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-041-4153
Utility Access Door

270414153
146X144 CM PVC: RNCC: 2 | RNVC: 1

21 May 2008

5340-27-050-0154
Access Cover

270500154
AR533T148000000: RNCC: 2 | RNVC: 1

17 Jun 2010

5340-27-059-2513
Mending Plate

270592513
98005567: RNCC: 2 | RNVC: 1

28 Jun 2013

5340-27-059-5078
Access Cover

270595078
VOE12740673: RNCC: 3 | RNVC: 2
VOE12740673: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-27-059-0757
Mounting Bracket

270590757
6R4ZLD310002: RNCC: 5 | RNVC: 9

22 May 2013

5340-27-021-0359
Mounting Bracket

270210359
1009.1KI.0334-1: RNCC: 2 | RNVC: 1
1009.1KI.0334-2: RNCC: 2 | RNVC: 1
1009.1KI.0334-3: RNCC: 2 | RNVC: 1
1009.1KI.0334-4: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-5006
Mending Plate

270495006
108050: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-053-8541
Mounting Bracket

270538541
H346062900: RNCC: 2 | RNVC: 1

28 Jun 2011

5340-27-058-2889
Mounting Bracket

270582889
G002863: RNCC: 5 | RNVC: 9

3 Jan 2013

5340-27-054-3662
Mending Plate

270543662
98021963: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-024-4308
Mounting Bracket

270244308
11747242: RNCC: 2 | RNVC: 1

26 Oct 2004

5340-27-047-8708
Mounting Bracket

270478708
13C35-16547-AA: RNCC: 2 | RNVC: 1

21 Dec 2009

5340-27-017-2887
Mounting Bracket

270172887
MP001102: RNCC: 2 | RNVC: 1

9 Jun 2003

5340-27-034-6117
Mounting Bracket

270346117
533A26: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-019-7685
Bridge Clamp

270197685
W4631009: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-015-9921
Hinge Torsion Bar

270159921
7700 759 873: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-018-6237
Mounting Bracket

270186237
1010FG-1401862: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-0701
Mending Plate

270500701
104456: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-055-3612
Access Cover

270553612
YC15V405A02AG: RNCC: 2 | RNVC: 1

1 Dec 2011

5340-27-018-3605
Mounting Bracket

270183605
10121YP5564: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-056-3966
Mounting Bracket

270563966
3831631: RNCC: 3 | RNVC: 2
3831631: RNCC: 3 | RNVC: 2

23 Mar 2012

5340-27-015-0350
Loop Clamp

270150350
7057333: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-059-4882
Bow Handle

270594882
13C40-72310-AA: RNCC: 2 | RNVC: 1

23 Aug 2013

5340-27-018-5087
Loop Clamp

270185087
50041YK0063: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-018-8957
Mortise Lock

270188957
11051YK0080: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-017-3668
Mending Plate

270173668
1009.1IS.0101: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-011-4853
Access Cover

270114853
4566238003: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-024-1226
Mounting Bracket

270241226
10012052: RNCC: 2 | RNVC: 1

21 Sep 2004

5340-27-059-0215
Access Cover

270590215
BY0346663: RNCC: 2 | RNVC: 1

16 May 2013

5340-27-035-1793
Mounting Bracket

270351793
95CT5K492AA: RNCC: 2 | RNVC: 1

1 Mar 2007

5340-27-053-0539
Mending Plate

270530539
107306: RNCC: 2 | RNVC: 2

22 Mar 2011

5340-27-049-4857
Mending Plate

270494857
108631: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-058-3130
Mending Plate

270583130
0490 1745: RNCC: 2 | RNVC: 1

8 Jan 2013

5340-27-053-2929
Mounting Bracket

270532929
H341156800: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-001-2703
Mounting Plate

270012703
102460001: RNCC: 3 | RNVC: 2

21 Jan 1994

5340-27-050-0710
Mending Plate

270500710
83A19-61336-AA: RNCC: 2 | RNVC: 1

21 Jun 2010

5340-27-053-5160
Swivel Caster

270535160
5340-TJ1-10198: RNCC: 3 | RNVC: 2

13 May 2011

5340-27-043-0036
Mounting Bracket

270430036
40.626.0111: RNCC: 2 | RNVC: 1
40.626.0111: RNCC: 2 | RNVC: 1

24 Sep 2008

5340-27-042-5650
Mending Plate

270425650
3978698: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-034-1150
Mounting Bracket

270341150
0000GK0136367: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-024-4871
Mounting Bracket

270244871
31122-25800: RNCC: 2 | RNVC: 1

4 Nov 2004

5340-27-019-6298
Butt Hinge

270196298
05001HM0116: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-035-9607
Mounting Bracket

270359607
127331688: RNCC: 2 | RNVC: 1

12 Apr 2007

5340-27-054-7862
Mending Plate

270547862
201588: RNCC: 2 | RNVC: 2

14 Oct 2011

5340-27-051-5608
Mending Plate

270515608
102998: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-27-003-9946
Expansion Shield

270039946
10111YC8900: RNCC: 3 | RNVC: 2

29 Jun 1995

5340-27-036-0961
Access Cover

270360961
1010FK-2710864: RNCC: 2 | RNVC: 1

27 Apr 2007

5340-27-027-3927
Flush Catch

270273927
BT0064: RNCC: 2 | RNVC: 1

30 Sep 2005

5340-27-053-9655
Mounting Bracket

270539655
55RS551814: RNCC: 2 | RNVC: 1

12 Jul 2011

5340-27-028-7616
Mounting Bracket

270287616
884-5820-686: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-053-9811
Handle Grip

270539811
72A58-57138-AA: RNCC: 3 | RNVC: 2

13 Jul 2011

5340-27-049-8385
Bridge Clamp

270498385
700325050203: RNCC: 2 | RNVC: 1

4 Jun 2010

5340-27-020-8976
Mounting Bracket

270208976
1009.1KI.0323-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-8693
Mending Plate

270568693
201838: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-019-9357
Mounting Bracket

270199357
NRC7053-LD: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-6180
Loop Clamp

270056180
88VB-17N294-AB: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-018-7151
Mounting Bracket

270187151
1010FK-1911270: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-055-6891
Mounting Bracket

270556891
55RS251870: RNCC: 2 | RNVC: 1

27 Dec 2011

5340-27-049-4853
Mending Plate

270494853
107862: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-045-9311
Loop Clamp

270459311
2466820332: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-043-0023
Mounting Bracket

270430023
40.626.0128: RNCC: 2 | RNVC: 1
40.626.0128: RNCC: 2 | RNVC: 1

24 Sep 2008

5340-27-059-7660
Mounting Bracket

270597660
9999-0000-0356: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-058-9400
Access Cover

270589400
VOE12745264: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-048-9649
Mending Plate

270489649
103686: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-048-6518
Mending Plate

270486518
SB254134Y: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-27-049-4703
Angle Bracket

270494703
MCT1221215-001: RNCC: 2 | RNVC: 1

4 May 2010

5340-27-029-6664
Mending Plate

270296664
5EA-25117-00-00: RNCC: 5 | RNVC: 9

28 Apr 2006

5340-27-024-8244
Loop Clamp

270248244
MS21122-13: RNCC: 2 | RNVC: 1

7 Dec 2004

5340-27-059-2539
Access Cover

270592539
KA 03/400097113: RNCC: 2 | RNVC: 1

28 Jun 2013

5340-27-033-6396
Access Cover

270336396
901-GK-31: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-015-0465
Loop Clamp

270150465
1010FG-0306158: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-060-0559
Mounting Bracket

270600559
MN-7490-0053: RNCC: 2 | RNVC: 1

3 Jan 2014

5340-27-057-9514
Mounting Bracket

270579514
31236-ZY3-003: RNCC: 2 | RNVC: 1

21 Nov 2012

5340-27-034-1056
Mounting Bracket

270341056
13D05-66047-AA: RNCC: 2 | RNVC: 1

12 Dec 2006

5340-27-028-7760
Handle Grip

270287760
8K37441: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-035-9387
Plug Button

270359387
735293924: RNCC: 2 | RNVC: 1

10 Apr 2007

5340-27-016-7291
Bridge Clamp

270167291
98003533: RNCC: 2 | RNVC: 1

5 Mar 2003

5340-27-054-1762
Mending Plate

270541762
98019284: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-028-7823
Mounting Bracket

270287823
884-5810-967: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-032-6559
Utility Access Door

270326559
40-660-5075: RNCC: 2 | RNVC: 1
40-660-5075: RNCC: 2 | RNVC: 1

31 Aug 2006

5340-27-037-7462
Mounting Bracket

270377462
83A11-36850-AA: RNCC: 2 | RNVC: 1

23 Aug 2007

5340-27-022-1309
Bridge Clamp

270221309
45517166006: RNCC: 2 | RNVC: 1
45517166006: RNCC: 5 | RNVC: 9

12 Feb 2004

5340-27-001-7711
Loop Clamp

270017711
TM55-1520-210-3MS21919WDG-23: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-024-4307
Bail Handle

270244307
05001HK0019: RNCC: 2 | RNVC: 1

26 Oct 2004

5340-27-045-9318
Loop Clamp

270459318
4661A1: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-004-5531
Loop Clamp

270045531
10091YK5048: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-007-4106
Mounting Bracket

270074106
95AG 2L455 AA: RNCC: 2 | RNVC: 1

4 Nov 1999

5340-27-017-3880
Mounting Bracket

270173880
1009.1IS.0067-17: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-019-2015
Mounting Bracket

270192015
11001MP0123: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-5184
Crank Handle

270405184
98000-0419: RNCC: 2 | RNVC: 1

25 Jan 2008

5340-27-048-7544
Loop Clamp

270487544
CN100708-LD: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-27-032-6755
Access Cover

270326755
T530-G6500-000: RNCC: 2 | RNVC: 1

6 Sep 2006

5340-27-054-0105
Mounting Bracket

270540105
897585244351: RNCC: 3 | RNVC: 2

15 Jul 2011

5340-27-060-0537
Mounting Bracket

270600537
MM-7490-0605: RNCC: 2 | RNVC: 1

2 Jan 2014

5340-27-008-2478
Angle Bracket

270082478
98000574-1: RNCC: 2 | RNVC: 1

28 Aug 2000

5340-27-018-2551
Mounting Bracket

270182551
98013198: RNCC: 2 | RNVC: 1

12 Nov 2003

5340-27-024-9808
Mortise Lock

270249808
01-201-301: RNCC: 2 | RNVC: 1

22 Dec 2004

5340-27-021-0459
Mounting Bracket

270210459
1009.1KI.0339-11: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-044-5776
Access Cover

270445776
Y532-60102-202: RNCC: 2 | RNVC: 1

18 Feb 2009

5340-27-008-3322
Mounting Bracket

270083322
80B/9-10: RNCC: 2 | RNVC: 1

19 Sep 2000

5340-27-020-7559
Mounting Bracket

270207559
1009.1KI.0264-1*2-9: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-7812
Mending Plate

270287812
884-5810-955: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-048-5788
Mending Plate

270485788
HD341252SY: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-27-055-8937
Mending Plate

270558937
58RS114585: RNCC: 2 | RNVC: 1

12 Jan 2012

5340-27-048-3901
Mounting Bracket

270483901
5421461-B: RNCC: 2 | RNVC: 1

5 Feb 2010

5340-27-025-2791
Angle Bracket

270252791
41000629: RNCC: 2 | RNVC: 1

16 Feb 2005

5340-27-018-6414
Mounting Bracket

270186414
1010FG-0401331: RNCC: 2 | RNVC: 1
HSN06-015: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-023-1186
Mounting Bracket

270231186
1010FG-0000787: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-059-8411
Mending Plate

270598411
10085072: RNCC: 2 | RNVC: 1

18 Nov 2013

5340-27-016-9910
Angle Bracket

270169910
6040-0533-1006: RNCC: 2 | RNVC: 1

25 Apr 2003

5340-27-051-0371
Utility Access Door

270510371
IYAK-1200X2120: RNCC: 2 | RNVC: 1

27 Sep 2010

5340-27-051-3195
Access Cover

270513195
SAP-A6-01-06: RNCC: 3 | RNVC: 2

15 Oct 2010

5340-27-058-9395
Access Cover

270589395
VOE12739580: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-018-4309
Flush Catch Claw

270184309
3011R30200008: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-5887
Bridge Clamp

270545887
09013KL0001: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-052-7109
Loop Clamp

270527109
DIN3016-1-D1-82-25-W3-CR: RNCC: 2 | RNVC: 2

17 Feb 2011

5340-27-044-4070
Synchro Clamp

270444070
81.61701-0196: RNCC: 2 | RNVC: 1

3 Feb 2009

5340-27-048-7541
Loop Clamp

270487541
CN100308-LD: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-27-052-6341
Catch Strike

270526341
90 57 000 03R: RNCC: 2 | RNVC: 2

10 Feb 2011

5340-27-004-5556
Access Cover

270045556
10091YK5033: RNCC: 3 | RNVC: 2

16 Apr 1996

5340-27-029-6659
Mending Plate

270296659
90465-10028-00: RNCC: 5 | RNVC: 9

28 Apr 2006

5340-27-048-2654
Mounting Bracket

270482654
6040-4038-0016: RNCC: 2 | RNVC: 1

22 Jan 2010

5340-27-005-5990
Catch Strike

270055990
87VB-B06157-AA: RNCC: 3 | RNVC: 2

29 Jun 1997

5340-27-027-9557
Angle Bracket

270279557
6040-4038-1001: RNCC: 2 | RNVC: 1

21 Nov 2005

5340-27-048-4749
Angle Bracket

270484749
6040-4040-0015: RNCC: 2 | RNVC: 1

11 Feb 2010

5340-27-060-0533
Mounting Bracket

270600533
MM-7490-0569: RNCC: 2 | RNVC: 1

2 Jan 2014

5340-27-042-9961
Mounting Bracket

270429961
40.624.0176: RNCC: 2 | RNVC: 1
40.624.0176: RNCC: 2 | RNVC: 1

23 Sep 2008

5340-27-054-0264
Mounting Bracket

270540264
55RS350883: RNCC: 2 | RNVC: 1

18 Jul 2011

5340-27-027-9819
Loop Clamp

270279819
EAB700D2: RNCC: 2 | RNVC: 1

23 Nov 2005

5340-27-009-6884
Mounting Bracket

270096884
2151 88: RNCC: 2 | RNVC: 1

16 Aug 2001

5340-27-026-0137
Mounting Bracket

270260137
1615766480: RNCC: 2 | RNVC: 1

18 May 2005

5340-27-004-5134
Access Cover

270045134
10121YK5366: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-054-1741
Mending Plate

270541741
98019513: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-048-7648
Mending Plate

270487648
6782: RNCC: 2 | RNVC: 1
6782: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-019-5397
Caster Wheel

270195397
07002YT0194: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-033-9360
Bow Handle

270339360
83970010010: RNCC: 2 | RNVC: 1

29 Nov 2006

5340-27-020-7833
Mounting Bracket

270207833
1009.1KI.0164-6*2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-024-1113
Angle Bracket

270241113
901-TK-289J: RNCC: 2 | RNVC: 1

17 Sep 2004

5340-27-008-4204
Mounting Bracket

270084204
6009-0517-9002: RNCC: 2 | RNVC: 1
6009-0517-9002: RNCC: 2 | RNVC: 1

6 Oct 2000

5340-27-021-9883
Mounting Bracket

270219883
1009 1AD 0033/2: RNCC: 2 | RNVC: 1

20 Jan 2004

5340-27-043-7091
Crank Handle

270437091
92CTE222050AA: RNCC: 2 | RNVC: 1
92CTE222050AA: RNCC: 2 | RNVC: 1

3 Dec 2008

5340-27-056-1903
Leakproof Seal Plug

270561903
2.HIBM-AT-MEK16: RNCC: 2 | RNVC: 1

28 Feb 2012

5340-27-039-4937
Utility Access Door

270394937
OZ.KP: RNCC: 2 | RNVC: 1

4 Dec 2007

5340-27-032-5033
Loop Clamp

270325033
T530-G2000-300: RNCC: 2 | RNVC: 1

26 Jul 2006

5340-27-044-7317
Mending Plate

270447317
81.62541-0006: RNCC: 3 | RNVC: 2

9 Mar 2009

5340-27-040-9852
Mounting Bracket

270409852
5-008-001: RNCC: 1 | RNVC: 2

16 Apr 2008

5340-27-046-2834
Mounting Bracket

270462834
5986-0079-9000: RNCC: 2 | RNVC: 1

27 Jul 2009

5340-27-051-6388
Mending Plate

270516388
3EC-15-11290: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-27-060-0393
Mounting Bracket

270600393
MM-7490-0109: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-056-6660
Mounting Bracket

270566660
ADOP-SHELTER-180-BTSO: RNCC: 2 | RNVC: 1

25 Apr 2012

5340-27-054-6791
Mounting Bracket

270546791
55RS752752927: RNCC: 2 | RNVC: 2

6 Oct 2011

5340-27-023-0770
Expansion Plug

270230770
2ABMK 00204: RNCC: 2 | RNVC: 1

26 May 2004

5340-27-052-7287
Mending Plate

270527287
10046606: RNCC: 2 | RNVC: 1

18 Feb 2011

5340-27-034-1842
Crank Handle

270341842
100029: RNCC: 2 | RNVC: 1

15 Dec 2006

Load More Results