What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Pipe Hanger Extension Bar?

A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Mortise Latch Set?

A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Casement Fastener?

A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Ball Socket Seat?

A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is an Escutcheon Plate?

An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.

Hardware, Commercial - Turkey (TR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Turkey (TR) - NCB is 27

Page 1 of 53

NSN Format for Hardware, Commercial
Codified by Turkey

53	40	27	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Turkey (TR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 26 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Retaining Clip? 1857 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Loop 42 Items
Holder,Spring 83 Items
What is a Compression Cup? 33 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 28 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 115 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 167 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Retaining Strap? 407 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Pipe Hanger Extension Bar? 12 Items: A Pipe Hanger Extension Bar (BAR,EXTENSION,PIPE HANGER) is a metal item of rectangular cross section perforated at specific intervals and designed to suspend or position pipe, cables, tubes, and the like.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Corner Brace? 20 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Push Door Plate? 10 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Mortise Latch Set? 38 Items: A Mortise Latch Set (LATCH SET,MORTISE) is a latch set in which the latch is designed to be fitted into the edge of a door, drawer, and the like.
What is a Sliding Door Hanger? 14 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 31 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Casement Fastener? 59 Items: A Casement Fastener (FASTENER,CASEMENT) is a barring device consisting of an integral bar and handle which is either attached to a base plate or designed to be attached directly to the item which it fastens by a pin, bolt or screw. It is engaged by placing the integral bar in an adjoining cavity or strike and is secured by cam action. The fastener is usually mounted on the stile of a door and can be operated from one side only.
What is a Flush Lock? 32 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Sliding Door Track? 87 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 19 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 19 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Tee Hinge? 23 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Butt Hinge Leaf? 23 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 18 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is an Expansion Shield? 57 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 1946 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 277 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 33 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Handwheel? 15 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 187 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 783 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 109 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 153 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 22 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 32 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Pad Eye? 38 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is an Angle Bracket? 510 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 13 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 16 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 126 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 787 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 30 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 70 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 54 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 11 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Catch Strike? 273 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 10 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 119 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Bow Handle? 321 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Bail Handle? 68 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 160 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 64 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 66 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 90 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is an Instrument Mounting Clamp? 11 Items: An Instrument Mounting Clamp (CLAMP,INSTRUMENT MOUNTING) is a clamp specifically designed to hold a dial instrument in position in the cutout of an instrument panel, or the like. It incorporates an adjusting mechanism that permits installation and removal of the instrument from the front of the panel while the clamp remains secured to the back of the panel.
What is a Headless Straight Rod? 282 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 92 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Line Supporting Strap? 11 Items: A Line Supporting Strap (STRAP,LINE SUPPORTING) is a flexible strap, furnished with a buckle, specificifically designed to support other items, such as cable(s), wire(s), tube(s), and the like. The buckle may be permanently assembled and may be provided with a mounting feature. The strap may be used to bridge a channel by mounting the buckle and strap separately. Excludes CLAMP, LOOP; STRAP, RETAINING; STRAP, LEATHER; and STRAP, WEBBING.
What is a Nut And Bolt Locking Plate? 83 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Air Inlet-Outlet Frame? 27 Items: An Air Inlet-Outlet Frame (FRAME,AIR INLET-OUTLET) is a flat rigid item provided with means for attaching to a panel, container, or the like. It is designed for the purpose of holding a screen or filter in place over an air inlet or outlet.
What is a Window Retaining Plate? 11 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Hand Carrying Strap Assembly? 26 Items: A Hand Carrying Strap Assembly (STRAP ASSEMBLY,HAND CARRYING) is an item consisting of two parallel straps with buckles, joined by a carrying handle.
What is a Butt Hinge? 210 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 66 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 84 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 52 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 115 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 18 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide Section? 38 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 53 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is an Access Cover? 845 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 34 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 18 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 26 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 133 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 191 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 33 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Dust And Moisture Seal Protective Cap Set? 23 Items: A Dust And Moisture Seal Protective Cap Set (CAP SET,PROTECTIVE,DUST AND MOISTURE SEAL) is an item consisting of two or more different CAP, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Block Clamp? 14 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 3811 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is an Elastic Strap? 21 Items: An Elastic Strap (STRAP,ELASTIC) is a molded flexible item, of definite length, having the ability to give under tension yet hold and secure in a fixed position tarpaulins, flexible covers, cargo, and the like. It is designed to accommodate, and may include, D rings, S or Z hooks, and the like. Excludes CORD ASSEMBLY, ELASTIC.
What is a Strap Hinge Leaf? 12 Items: A Strap Hinge Leaf (LEAF,STRAP HINGE) is an item consisting of one half only of HINGE, STRAP, with or without a pin.
What is a Retaining Bail? 75 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1642 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 15 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 24 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 79 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 47 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 51 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 16 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 33 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Rod End Locking Retainer? 10 Items: A Rod End Locking Retainer (RETAINER,ROD END LOCKING) is a rigid metallic item specifically designed to be installed in the grooves of a rod end. When installed it prevents rotation of a threaded fastener, such as a jam nut and the like, and must have facilities for a lock wire.
What is an Arched Cushion? 24 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Handle Ferrule? 13 Items: A Handle Ferrule (FERRULE,HANDLE) is an item specifically designed to be fitted around the ends of a handle to reinforce, or to reduce the interior diameter to facilitate mounting.
What is a Caster Wheel? 51 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Runner? 66 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Retaining Clamp Assembly? 146 Items: A Retaining Clamp Assembly (CLAMP ASSEMBLY,RETAINING) is a device used for supporting parts of a cargo parachute release by holding the connectors of a cargo parachute in position until ground impact.
What is a Leakproof Seal Plug? 10 Items: A Leakproof Seal Plug (PLUG,LEAKPROOF SEAL) is a conical item in different sizes and of different materials. This item may be used as a device against air escape and flooding.
What is an Angle Bracket Set? 10 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Lock Key? 36 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 79 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 1274 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Electromagnetic Lock? 10 Items: An Electromagnetic Lock (LOCK,ELECTROMAGNETIC) is a item designed to lock or unlock a door by the activation or deactivation of an electromagnet magnetically coupled to a strike. It may contain a signal device to a central panel to indicate locked, unlocked, holding force, magnetic bond, or door open condition.
What is a Rod Retainer Clip? 23 Items: A Rod Retainer Clip (CLIP,ROD RETAINER) is an item formed or molded from resilient material, open along the entire length of the body and having in one end a clevis w/transverse holes, or a split tubular type clip through which a part, pin or a like is being held in place by spring tension.
What is a Clamping Catch Fastener? 19 Items: A Clamping Catch Fastener (FASTENER,CATCH,CLAMPING) is an item which is the locking part of a CATCH,CLAMPING. It may be made of rubber or a spring loaded barrel or cylinder.
What is an Utility Access Door? 197 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 1046 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Flush Catch Claw? 57 Items: A Flush Catch Claw (CLAW,FLUSH CATCH) is a metal portion of a CATCH, FLUSH designed to mate with a slot, hole or the like, to grip or lock two mating pieces together by a clamping action. It does not include actuating levers.
What is an Access Door Hinge? 86 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 14 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
Holder,Roller 13 Items
What is a Key Blank? 16 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 14 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Detent Plunger? 18 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 252 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Flange Protector? 12 Items: A Flange Protector (PROTECTOR,FLANGE) is a piece of material specifically designed for attachment to the mating surface of a collar. When attached, it prevents surface damage during handling, shipping, storage and can easily be removed prior to installation.
What is a Sealing Plug Assembly? 14 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 29 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 1 of 53

5340-27-044-9664
Retaining Clip

270449664
MR975477XA: RNCC: 2 | RNVC: 1

24 Mar 2009

5340-27-018-7031
Mounting Plate

270187031
1010FK-2810883: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-058-4784
Runner

270584784
1010FMA-1901226: RNCC: 2 | RNVC: 1

8 Feb 2013

5340-27-005-1551
Dirt And Liquid Deflector

270051551
1010000028: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-012-8354
Dust And Moisture Seal Protective Cover

270128354
81.37411.0004: RNCC: 2 | RNVC: 1

26 Mar 2002

5340-27-037-3434
Retaining Clip

270373434
46752792: RNCC: 2 | RNVC: 1

24 Jul 2007

5340-27-016-7260
Retaining Clip

270167260
7647875: RNCC: 2 | RNVC: 1

5 Mar 2003

5340-27-037-2031
Engine Accessory Bracket

270372031
470199: RNCC: 2 | RNVC: 1

18 Jul 2007

5340-27-058-1413
Dust And Moisture Seal Protective Plug

270581413
183-3407: RNCC: 2 | RNVC: 1

14 Dec 2012

5340-27-048-7009
Delikli Plaka

270487009
321940: RNCC: 2 | RNVC: 1

22 Feb 2010

5340-27-007-1153
Expansion Shield

270071153
8MMPLASTIK: RNCC: 2 | RNVC: 1
8 MM: RNCC: 2 | RNVC: 1
DUBEL,PLASTIK 8MM: RNCC: 2 | RNVC: 1
8MM PLASTIK DUBEL: RNCC: 2 | RNVC: 1
09002999110: RNCC: 2 | RNVC: 1
DA0012240: RNCC: 2 | RNVC: 1
M.CETIN 137: RNCC: 2 | RNVC: 1
8MM DUBEL: RNCC: 2 | RNVC: 1
8MM: RNCC: 2 | RNVC: 1
DUBEL,PLASTIK 8MM: RNCC: 2 | RNVC: 1

17 Aug 1999

5340-27-052-2031
Retaining Strap

270522031
3185616-5: RNCC: 2 | RNVC: 1

24 Dec 2010

5340-27-058-5341
Mounting Plate

270585341
920-8103/01: RNCC: 2 | RNVC: 1

18 Feb 2013

5340-27-056-4297
Baglanti Parcasi

270564297
1010FMA-0608055-1: RNCC: 2 | RNVC: 1

28 Mar 2012

5340-27-021-3451
Double Angle Bracket

270213451
1010FG-0000747: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-040-6040
Mounting Plate

270406040
Y534-73017-202: RNCC: 2 | RNVC: 1

4 Feb 2008

5340-27-021-7705
Strap Fastener Loop

270217705
10131YK2007: RNCC: 2 | RNVC: 1

29 Dec 2003

NSN 5340-27-016-0359 270160359 LOCK,MORTISE

5340-27-016-0359
Mortise Lock

270160359
99999-NIIN-DA0052450: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-022-3743
Strap Fastener Loop

270223743
39038: RNCC: 2 | RNVC: 1

3 Mar 2004

5340-27-020-3625
Strap Fastener Loop

270203625
1010007438: RNCC: 2 | RNVC: 1

3 Dec 2003

5340-27-054-3025
Arched Cushion

270543025
98020376: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-054-3017
Arched Cushion

270543017
98020370: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-016-9259
Turnbuckle

270169259
8AT.0700.007: RNCC: 2 | RNVC: 1

11 Apr 2003

5340-27-017-4221
Corner Brace

270174221
EIBM-AA4-406: RNCC: 2 | RNVC: 1

20 Jun 2003

5340-27-035-2953
Strap Fastener Loop

270352953
05001FT0220: RNCC: 2 | RNVC: 1

7 Mar 2007

5340-27-020-3602
Strap Fastener Loop

270203602
5340-ATF-0376: RNCC: 2 | RNVC: 1

3 Dec 2003

5340-27-016-2877
Strap Fastener Loop

270162877
831527HL0000231-S: RNCC: 2 | RNVC: 1

22 May 2002

5340-27-054-3022
Arched Cushion

270543022
98020374: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-027-0062
Strap Fastener Loop

270270062
2ABMK01703: RNCC: 2 | RNVC: 1

18 Aug 2005

5340-27-054-3014
Arched Cushion

270543014
98020367: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-051-9005
Strap Fastener Loop

270519005
1010FK-1911426: RNCC: 2 | RNVC: 1

6 Dec 2010

5340-27-017-4212
Corner Brace

270174212
EIBM-AA4-405R: RNCC: 2 | RNVC: 1

20 Jun 2003

5340-27-054-3656
Arched Cushion

270543656
98021385: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-023-3965
Strap Fastener Loop

270233965
1010FG-1804561: RNCC: 2 | RNVC: 1

26 Jun 2004

5340-27-025-4887
Hand Crank

270254887
10131YK2060: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-059-6431
Mounting Bracket

270596431
A-4544-00: RNCC: 2 | RNVC: 1

23 Sep 2013

5340-27-049-6612
Mounting Bracket

270496612
1010FG-0312923: RNCC: 2 | RNVC: 1

18 May 2010

5340-27-025-1887
Angle Bracket

270251887
EGD-0847: RNCC: 2 | RNVC: 1

26 Jan 2005

5340-27-021-5343
Block Clamp

270215343
1010FG-0000640: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-032-4362
Mounting Bracket

270324362
83A11-60110-AA: RNCC: 2 | RNVC: 1

12 Jul 2006

5340-27-055-4920
Mounting Bracket

270554920
58RS509252: RNCC: 2 | RNVC: 1

8 Dec 2011

5340-27-021-5364
Mending Plate

270215364
1010FK-0000147: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-040-6536
Bail Handle

270406536
40-770-0181: RNCC: 2 | RNVC: 1

19 Feb 2008

5340-27-042-8364
Mending Plate

270428364
72A54-36292-AA: RNCC: 2 | RNVC: 1

15 Sep 2008

5340-27-059-5502
Angle Bracket

270595502
901-DS-114: RNCC: 2 | RNVC: 1

4 Sep 2013

5340-27-048-7694
Access Cover

270487694
9034-46: RNCC: 2 | RNVC: 1
9034-46: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-043-6898
Utility Access Door

270436898
AL-2255X1020 MM: RNCC: 2 | RNVC: 1

2 Dec 2008

5340-27-058-9855
Caster Wheel

270589855
SHN-37: RNCC: 5 | RNVC: 9

10 May 2013

5340-27-050-2243
Mounting Bracket

270502243
SK17201-060000-005-0: RNCC: 2 | RNVC: 1

8 Jul 2010

5340-27-053-2976
Butt Hinge Leaf

270532976
3MV86582-0301: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-028-7605
Mounting Bracket

270287605
884-5810-956: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-022-3297
Mending Plate

270223297
1010FG-0000702: RNCC: 2 | RNVC: 1

25 Feb 2004

5340-27-044-5442
Catch Strike

270445442
81.62690-0055: RNCC: 2 | RNVC: 1

16 Feb 2009

5340-27-025-1467
Mounting Bracket

270251467
3120-ATF-0158: RNCC: 2 | RNVC: 1

14 Jan 2005

5340-27-040-7302
Mounting Bracket

270407302
1.HIBM-1I-2718: RNCC: 2 | RNVC: 1

11 Mar 2008

5340-27-018-7122
Mounting Bracket

270187122
1010FK-1911253: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-005-1731
Access Cover

270051731
1010000685: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-027-8848
Mounting Bracket

270278848
2ABM1MK0091: RNCC: 2 | RNVC: 1

16 Nov 2005

5340-27-009-0856
Pad Eye

270090856
98001449: RNCC: 2 | RNVC: 1

26 Apr 2001

5340-27-054-6081
Mounting Bracket

270546081
98016812: RNCC: 2 | RNVC: 2

30 Sep 2011

5340-27-043-0124
Butt Hinge

270430124
40.660.7405: RNCC: 2 | RNVC: 1
40.660.7405: RNCC: 2 | RNVC: 1

24 Sep 2008

5340-27-020-7510
Mounting Bracket

270207510
10131MP0037: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-019-5394
Caster Wheel

270195394
07002YT0191: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-017-3662
Mending Plate

270173662
1009.1IS.0087-14: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-032-5779
Section Block Clamp

270325779
40-626-0170: RNCC: 2 | RNVC: 1
40-626-0170: RNCC: 2 | RNVC: 1

11 Aug 2006

5340-27-024-6302
Bow Handle

270246302
64: RNCC: 2 | RNVC: 1
KULP, MADENI: RNCC: 5 | RNVC: 9

23 Nov 2004

5340-27-051-4090
Mending Plate

270514090
104776: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-045-5862
Mounting Bracket

270455862
PTM 8007 -: RNCC: 3 | RNVC: 2

15 May 2009

5340-27-026-5964
Hand Crank

270265964
10941027: RNCC: 2 | RNVC: 1

14 Jul 2005

5340-27-019-8885
Flush Catch Claw

270198885
1010FK-1812162: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-007-4099
Mounting Bracket

270074099
95AG 18A004 AB: RNCC: 2 | RNVC: 1

4 Nov 1999

5340-27-024-5715
Mounting Bracket

270245715
23211-26050: RNCC: 2 | RNVC: 1

12 Nov 2004

5340-27-019-5598
Blank Panel

270195598
07002YP0499: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-027-0860
Loop Clamp

270270860
MA159616: RNCC: 2 | RNVC: 1

1 Sep 2005

5340-27-020-4784
Mounting Bracket

270204784
98014122: RNCC: 2 | RNVC: 1

9 Dec 2003

5340-27-050-0577
Mending Plate

270500577
102839: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-036-0132
Mounting Bracket

270360132
10026001: RNCC: 2 | RNVC: 1

18 Apr 2007

5340-27-054-4975
Mounting Bracket

270544975
H233125600: RNCC: 2 | RNVC: 1

20 Sep 2011

5340-27-044-8947
Coat And Hat Hook

270448947
735444206: RNCC: 3 | RNVC: 2

19 Mar 2009

5340-27-042-3603
Bow Handle

270423603
14815: RNCC: 2 | RNVC: 1

11 Aug 2008

5340-27-059-6729
Loop Clamp

270596729
901-KL-321: RNCC: 2 | RNVC: 1

25 Sep 2013

5340-27-059-3052
Access Cover

270593052
98019105-26: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-044-0142
Mounting Bracket

270440142
5340-TJ-03328: RNCC: 2 | RNVC: 1

26 Dec 2008

5340-27-060-0504
Mounting Bracket

270600504
AC-7490-0036: RNCC: 2 | RNVC: 1

2 Jan 2014

5340-27-056-7081
Mounting Bracket

270567081
ADOP-SHELTER-180-ASSO: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-021-1735
Access Cover

270211735
1010FG-0800609: RNCC: 2 | RNVC: 1
1010FG-0800609: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-019-1343
Loop Clamp

270191343
83974400001: RNCC: 2 | RNVC: 1
90465-08380-00: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-020-2107
Support Hook

270202107
27490: RNCC: 2 | RNVC: 1
16001-DK-0035: RNCC: 2 | RNVC: 1
27490: RNCC: 5 | RNVC: 9

17 Nov 2003

5340-27-024-1769
Mounting Bracket

270241769
1010FK-0000234: RNCC: 2 | RNVC: 1

24 Sep 2004

5340-27-037-5928
Mounting Bracket

270375928
73B00-70082-AA: RNCC: 2 | RNVC: 1

8 Aug 2007

5340-27-020-1517
Loop Clamp

270201517
7703083002: RNCC: 2 | RNVC: 1
90465-10098-00: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-029-8718
Mounting Bracket

270298718
83A11-36026-AA: RNCC: 2 | RNVC: 1

2 Jun 2006

5340-27-032-9897
Mounting Bracket

270329897
FCT-E21096 AA: RNCC: 2 | RNVC: 1

6 Oct 2006

5340-27-059-7648
Mending Plate

270597648
6040-0037-2009: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-056-7089
Mounting Bracket

270567089
MM-7412-0014: RNCC: 2 | RNVC: 1

30 Apr 2012

5340-27-044-2899
Mending Plate

270442899
81.98181-6349: RNCC: 2 | RNVC: 1

22 Jan 2009

5340-27-055-3415
Mounting Bracket

270553415
1692-0202: RNCC: 3 | RNVC: 2

30 Nov 2011

5340-27-000-1481
Snap Hook

270001481
A7-626: RNCC: 3 | RNVC: 2

5 May 1977

5340-27-060-0376
Mounting Bracket

270600376
MM-7490-0594: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-050-8641
Access Cover

270508641
6H4-21710-00: RNCC: 3 | RNVC: 2
6H4-21710-00: RNCC: 3 | RNVC: 2

6 Sep 2010

5340-27-060-0381
Mounting Bracket

270600381
MM-7490-0177: RNCC: 2 | RNVC: 1

30 Dec 2013

5340-27-041-5107
Angle Bracket

270415107
901-BR-124: RNCC: 2 | RNVC: 1

29 May 2008

5340-27-053-9845
Mounting Bracket

270539845
72C07-61416-AA: RNCC: 2 | RNVC: 1

13 Jul 2011

5340-27-042-0517
Mounting Bracket

270420517
Y531-61002-204: RNCC: 2 | RNVC: 1

15 Jul 2008

5340-27-032-5014
Access Cover

270325014
T570-G6000-100: RNCC: 2 | RNVC: 1

26 Jul 2006

5340-27-042-7420
Mounting Bracket

270427420
1010006275: RNCC: 2 | RNVC: 1

9 Sep 2008

5340-27-053-9168
Mending Plate

270539168
98020655: RNCC: 3 | RNVC: 2

6 Jul 2011

5340-27-006-1884
Elbow Catch

270061884
2K14526: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-27-049-8482
Mending Plate

270498482
108585: RNCC: 3 | RNVC: 2

7 Jun 2010

5340-27-038-1880
Mechanical Stop

270381880
1010FK-2702090: RNCC: 2 | RNVC: 1

20 Sep 2007

5340-27-023-1614
Mounting Bracket

270231614
10121YC5538: RNCC: 2 | RNVC: 1

2 Jun 2004

5340-27-018-7053
Mounting Bracket

270187053
1010FK-1911160: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-1896
Mounting Bracket

270501896
8812070240: RNCC: 2 | RNVC: 1

5 Jul 2010

5340-27-058-9305
Access Cover

270589305
VOE12741909: RNCC: 3 | RNVC: 2

2 May 2013

5340-27-054-7446
Mending Plate

270547446
200738: RNCC: 2 | RNVC: 2

12 Oct 2011

5340-27-023-6521
Access Cover

270236521
8213912: RNCC: 2 | RNVC: 1

23 Jul 2004

5340-27-041-3637
Utility Access Door

270413637
106X191 CM AL: RNCC: 2 | RNVC: 1

15 May 2008

5340-27-049-9671
Mending Plate

270499671
HD110262: RNCC: 2 | RNVC: 2
HD110262: RNCC: 3 | RNVC: 2

16 Jun 2010

5340-27-025-3445
Mounting Bracket

270253445
2540-ATF-0202: RNCC: 2 | RNVC: 1

28 Feb 2005

5340-27-051-2511
Mounting Bracket

270512511
16F00-66671-AA: RNCC: 2 | RNVC: 1

12 Oct 2010

5340-27-023-2774
Access Cover

270232774
1010FK-1803681: RNCC: 2 | RNVC: 1

15 Jun 2004

5340-27-038-7429
Mounting Bracket

270387429
10917863: RNCC: 2 | RNVC: 1

30 Oct 2007

5340-27-022-7722
Access Cover

270227722
7161922: RNCC: 2 | RNVC: 1
06142: RNCC: 2 | RNVC: 1

17 Apr 2004

5340-27-020-1248
Access Cover

270201248
1010FGFK1802051: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-053-3128
Utility Access Door

270533128
H341149003: RNCC: 2 | RNVC: 1

18 Apr 2011

5340-27-020-8298
Butt Hinge

270208298
9IML-0368: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-042-6530
Mounting Bracket

270426530
72A97-60180-AA: RNCC: 2 | RNVC: 1

3 Sep 2008

5340-27-053-7712
Loop Clamp

270537712
N07/4315070: RNCC: 2 | RNVC: 1

17 Jun 2011

5340-27-022-4724
Mounting Bracket

270224724
1010FK-0000090: RNCC: 2 | RNVC: 1

12 Mar 2004

5340-27-027-9922
Angle Bracket

270279922
6015-2337-3004: RNCC: 2 | RNVC: 1

23 Nov 2005

5340-27-058-5581
Leakproof Seal Plug

270585581
32607-10700: RNCC: 5 | RNVC: 9

20 Feb 2013

5340-27-060-0502
Mounting Bracket

270600502
AC-7490-0033: RNCC: 2 | RNVC: 1

2 Jan 2014

5340-27-007-9976
Access Cover

270079976
DZJM000095: RNCC: 2 | RNVC: 1
DZJM000095: RNCC: 2 | RNVC: 1

22 May 2000

5340-27-033-6376
Access Cover

270336376
901-KK-185: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-038-1071
Mounting Bracket

270381071
944-65-403: RNCC: 2 | RNVC: 1

13 Sep 2007

5340-27-050-3899
Mending Plate

270503899
105282-1: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-058-2424
Mending Plate

270582424
MM-7560-0300: RNCC: 2 | RNVC: 1

25 Dec 2012

5340-27-059-2583
Loop Clamp

270592583
CM012018-11: RNCC: 2 | RNVC: 1

1 Jul 2013

5340-27-015-8706
Padlock

270158706
99999-NIIN-DA0052440: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-059-7602
Mounting Bracket

270597602
9999-0000-0353: RNCC: 2 | RNVC: 1

30 Oct 2013

5340-27-052-3666
Catch Strike

270523666
71B22-57515-AA: RNCC: 2 | RNVC: 1

12 Jan 2011

5340-27-059-5593
Angle Bracket

270595593
901-DS-131: RNCC: 2 | RNVC: 1

5 Sep 2013

5340-27-008-3350
Truss Fairlead

270083350
4-M-091: RNCC: 2 | RNVC: 1

19 Sep 2000

5340-27-001-7570
Loop Clamp

270017570
TM55-1520-210-2EAB-700D7: RNCC: 3 | RNVC: 2

1 Jan 2000

5340-27-023-1203
Mounting Bracket

270231203
1010FK-0000196: RNCC: 2 | RNVC: 1

29 May 2004

5340-27-022-9359
Lock Key

270229359
3.05.04.08: RNCC: 2 | RNVC: 1

5 May 2004

5340-27-020-9790
Mending Plate

270209790
1010FG-0402503: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3615
Flush Lock

270173615
1009.1IS.0059-7: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-055-2588
Utility Access Door

270552588
UG 025000 POZ-20: RNCC: 2 | RNVC: 1
UG 025000 POZ-20: RNCC: 3 | RNVC: 2

24 Nov 2011

5340-27-013-2443
Loop Clamp

270132443
90466-22003: RNCC: 2 | RNVC: 1
53407777700026: RNCC: 2 | RNVC: 1

20 May 2002

5340-27-055-1376
Sliding Door Track

270551376
S7C16V25001AB: RNCC: 2 | RNVC: 1

15 Nov 2011

5340-27-041-5105
Mounting Bracket

270415105
901-MP-164: RNCC: 2 | RNVC: 1

29 May 2008

5340-27-035-4956
Mounting Bracket

270354956
1.HIBM-1I-2306D42: RNCC: 2 | RNVC: 1

15 Mar 2007

5340-27-052-7290
Mending Plate

270527290
10046619: RNCC: 2 | RNVC: 1

18 Feb 2011

5340-27-043-0241
Angle Bracket

270430241
40.780.4006: RNCC: 2 | RNVC: 1
40.780.4006: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-038-7433
Mounting Bracket

270387433
10861519: RNCC: 2 | RNVC: 1

30 Oct 2007

5340-27-040-4526
Mounting Bracket

270404526
11654862: RNCC: 2 | RNVC: 1

23 Jan 2008

5340-27-023-5428
Access Cover

270235428
7034579: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-054-7869
Mending Plate

270547869
201594: RNCC: 2 | RNVC: 2

14 Oct 2011

5340-27-005-1729
Access Cover

270051729
1010000653: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-039-8073
Mounting Bracket

270398073
BMT300-M1: RNCC: 2 | RNVC: 1

18 Dec 2007

5340-27-028-7809
Mending Plate

270287809
884-5810-954: RNCC: 2 | RNVC: 1

6 Feb 2006

5340-27-027-9196
Hand Crank

270279196
M52T3011R450157: RNCC: 2 | RNVC: 1

17 Nov 2005

5340-27-049-1590
Bow Handle

270491590
8200863035: RNCC: 3 | RNVC: 2

8 Apr 2010

5340-27-005-1600
Control Rod

270051600
1010001416: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-049-8327
Bail Handle

270498327
CEKMECE KULPU, PORSELEN: RNCC: 2 | RNVC: 1

3 Jun 2010

5340-27-015-0377
Loop Clamp

270150377
7385173: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-049-7126
Mending Plate

270497126
73B00-57165-AA: RNCC: 2 | RNVC: 1

24 May 2010

5340-27-054-1806
Bow Handle

270541806
GTM /51012: RNCC: 2 | RNVC: 2

4 Aug 2011

5340-27-047-0091
Mounting Bracket

270470091
73A01-32060-AA: RNCC: 2 | RNVC: 1

26 Oct 2009

5340-27-040-2840
Angle Bracket

270402840
Y533-73000-252: RNCC: 2 | RNVC: 1

17 Jan 2008

5340-27-059-3038
Access Cover

270593038
98019105-11: RNCC: 2 | RNVC: 1

10 Jul 2013

5340-27-014-9843
Mortise Lock

270149843
10091YP0140: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-024-6413
Catch Strike

270246413
8K230847: RNCC: 2 | RNVC: 1

24 Nov 2004

5340-27-001-2954
Loop Clamp

270012954
205-030-407-171: RNCC: 3 | RNVC: 2

18 Oct 1994

5340-27-017-4877
Mechanical Stop

270174877
3345-00725: RNCC: 2 | RNVC: 1

1 Jul 2003

5340-27-044-5894
Mending Plate

270445894
502-21-CN-0113: RNCC: 2 | RNVC: 2

19 Feb 2009

5340-27-021-5345
Block Clamp

270215345
1010FG-0000642: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-8275
Sliding Door Track

270538275
C173-100172: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-27-017-4869
Block Clamp

270174869
H-39-0531-50: RNCC: 2 | RNVC: 1

1 Jul 2003

5340-27-017-9273
Mechanical Stop

270179273
901-LS-13: RNCC: 2 | RNVC: 1

10 Oct 2003

5340-27-023-4581
Mounting Bracket

270234581
1010FK-0000246: RNCC: 2 | RNVC: 1

1 Jul 2004

5340-27-001-8055
Loop Clamp

270018055
E-AB-205-T53-4 MS21919WDG3: RNCC: 3 | RNVC: 2

11 Nov 1994

5340-27-052-7088
Loop Clamp

270527088
DIN3016-1-D1-32X15-W3-CR: RNCC: 2 | RNVC: 2

17 Feb 2011

5340-27-020-9508
Mending Plate

270209508
1010FG-0000339: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-056-2254
Handle Grip

270562254
D8056-1098107: RNCC: 2 | RNVC: 2

1 Mar 2012

5340-27-025-2348
Mounting Bracket

270252348
205-030-515-2: RNCC: 2 | RNVC: 1

4 Feb 2005

5340-27-038-7158
Loop Holder

270387158
10091YC0167: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-053-7352
Bridge Clamp

270537352
C162-000350: RNCC: 2 | RNVC: 2

13 Jun 2011

5340-27-059-2940
Webbing Strap

270592940
2.HIBM-3F-0295: RNCC: 2 | RNVC: 1

9 Jul 2013

5340-27-048-7661
Bow Handle

270487661
6387-13: RNCC: 2 | RNVC: 1
6387-13: RNCC: 5 | RNVC: 9

25 Feb 2010

5340-27-028-7572
Mounting Bracket

270287572
884-5810-922: RNCC: 2 | RNVC: 1

3 Feb 2006

5340-27-044-2892
Mending Plate

270442892
81.25441-0731: RNCC: 2 | RNVC: 1

22 Jan 2009

5340-27-021-0349
Mounting Bracket

270210349
1009.1KI.0283-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-048-9465
Mending Plate

270489465
0501.213.741: RNCC: 3 | RNVC: 2

19 Mar 2010

5340-27-005-1577
Loop Clamp

270051577
1010001825: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-017-1365
Angle Bracket

270171365
ASM6C-16: RNCC: 2 | RNVC: 1

20 May 2003

5340-27-020-7876
Mounting Bracket

270207876
1009.1KI.0303-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-017-3808
Access Cover

270173808
1009.1IS.0020-5: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-033-6314
Loop Clamp

270336314
36,60X32,60X10,0: RNCC: 2 | RNVC: 1

7 Nov 2006

5340-27-056-8837
Mending Plate

270568837
10025879: RNCC: 2 | RNVC: 1
10025879-1: RNCC: 2 | RNVC: 1

24 May 2012

5340-27-024-4855
Mounting Bracket

270244855
SK17201-0110100: RNCC: 2 | RNVC: 1

3 Nov 2004

5340-27-019-6289
Recess Handle

270196289
05001HT0018: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-007-4242
Mechanical Stop

270074242
93BB 7B520 AB: RNCC: 2 | RNVC: 1

9 Nov 1999

5340-27-044-9165
Catch Strike

270449165
51797099: RNCC: 3 | RNVC: 2

20 Mar 2009

5340-27-021-4286
Angle Bracket

270214286
1010FG-0312912: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-020-9407
Mounting Bracket

270209407
1009.1KI.0264-2*2-8: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-049-4740
Mending Plate

270494740
104563: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-057-5551
Mounting Bracket

270575551
M539F328300200: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-049-4763
Mounting Bracket

270494763
107287: RNCC: 3 | RNVC: 2

4 May 2010

5340-27-051-2603
Mounting Bracket

270512603
55RS060076: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-27-053-8967
Bridge Clamp

270538967
DIN-3015-L-KP-7-R-76.1-PA: RNCC: 3 | RNVC: 2

4 Jul 2011

5340-27-003-9177
Access Cover

270039177
07001MN0681: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-27-017-3609
Corner Brace

270173609
1009.1IS.0032-4: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-013-4776
Corner Brace

270134776
53RS700433: RNCC: 2 | RNVC: 1

24 Jun 2002

5340-27-016-9211
Turnbuckle

270169211
7850041(7857.9001): RNCC: 2 | RNVC: 1

11 Apr 2003

5340-27-025-0073
Strap Fastener Loop

270250073
A7543: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-032-6412
Turnbuckle

270326412
T720-G6800-350: RNCC: 2 | RNVC: 1

28 Aug 2006

5340-27-018-8765
Strap Fastener Loop

270188765
11051YK0256: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-019-6185
Strap Fastener Loop

270196185
05001HT0040: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-3016
Arched Cushion

270543016
98020369: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-053-9087
Strap Fastener Loop

270539087
D-8MM-68MM: RNCC: 2 | RNVC: 1

6 Jul 2011

5340-27-013-4527
Corner Brace

270134527
53RS700311: RNCC: 2 | RNVC: 1

19 Jun 2002

5340-27-023-0568
Mounting Bracket

270230568
KMS 0042: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-007-5295
Mounting Bracket

270075295
3522-1142-8700: RNCC: 2 | RNVC: 1
3522-1142-8700: RNCC: 2 | RNVC: 1

10 Dec 1999

5340-27-053-7159
Mounting Bracket

270537159
901-BK-166: RNCC: 2 | RNVC: 1

10 Jun 2011

5340-27-012-4900
Expansion Plug

270124900
E 650312 S71: RNCC: 2 | RNVC: 1

1 Feb 2002

5340-27-026-0656
Filler Opening Cap

270260656
KURK-01: RNCC: 2 | RNVC: 1

30 May 2005

5340-27-005-4923
Access Cover

270054923
G001-35-2: RNCC: 3 | RNVC: 2

16 Nov 1997

5340-27-013-7011
Rim Lock

270137011
KOD 6400: RNCC: 2 | RNVC: 1
KILIT TRAJLI: RNCC: 2 | RNVC: 1

15 Jul 2002

5340-27-035-0337
Mounting Bracket

270350337
1010005814: RNCC: 2 | RNVC: 1

23 Feb 2007

5340-27-017-4978
Angle Bracket

270174978
PN913125: RNCC: 2 | RNVC: 1

3 Jul 2003

5340-27-058-8212
Blank Panel

270588212
VOE12745409: RNCC: 3 | RNVC: 2
VOE12745409: RNCC: 3 | RNVC: 2

9 Apr 2013

5340-27-058-8106
Blank Panel

270588106
VOE12745390: RNCC: 3 | RNVC: 2
VOE12745390: RNCC: 3 | RNVC: 2

5 Apr 2013

5340-27-054-5795
Mounting Bracket

270545795
C70AA58: RNCC: 3 | RNVC: 2

29 Sep 2011

5340-27-050-1565
Mending Plate

270501565
107418: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-27-047-1724
Mending Plate

270471724
13C00-56098-AA: RNCC: 2 | RNVC: 1

10 Nov 2009

5340-27-051-4093
Mending Plate

270514093
104779: RNCC: 3 | RNVC: 2

25 Oct 2010

5340-27-058-3609
Mending Plate

270583609
CV70342: RNCC: 2 | RNVC: 1

16 Jan 2013

5340-27-043-4955
Mounting Bracket

270434955
059044F: RNCC: 2 | RNVC: 1

14 Nov 2008

5340-27-042-5933
Access Cover

270425933
M258D235020000: RNCC: 2 | RNVC: 1

28 Aug 2008

5340-27-028-8357
Mending Plate

270288357
MR181732: RNCC: 2 | RNVC: 1

10 Feb 2006

5340-27-054-8126
Mending Plate

270548126
C70K28: RNCC: 2 | RNVC: 1

17 Oct 2011

5340-27-018-2418
Access Cover

270182418
3.03.10.03: RNCC: 2 | RNVC: 1

11 Nov 2003

5340-27-047-5740
Mounting Bracket

270475740
16F00-71520-AA: RNCC: 2 | RNVC: 1

9 Dec 2009

5340-27-042-3602
Bow Handle

270423602
14816: RNCC: 2 | RNVC: 1

11 Aug 2008

5340-27-016-5072
Mending Plate

270165072
81.97485.0549: RNCC: 2 | RNVC: 1

30 Jan 2003

5340-27-048-9635
Mending Plate

270489635
103664: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-059-2516
Mending Plate

270592516
98019861: RNCC: 2 | RNVC: 1

28 Jun 2013

5340-27-059-9490
Mounting Bracket

270599490
1200X100X8 MM: RNCC: 5 | RNVC: 9

11 Dec 2013

5340-27-006-9502
Mounting Bracket

270069502
P93AG F286K15 AA: RNCC: 2 | RNVC: 1

2 Jul 1999

5340-27-020-7899
Mounting Bracket

270207899
1009.1KI.0264-2*4-1: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-035-8893
Plug Button

270358893
85015952: RNCC: 2 | RNVC: 1

5 Apr 2007

5340-27-040-8629
Mending Plate

270408629
MB005388: RNCC: 2 | RNVC: 1

3 Apr 2008

5340-27-006-8289
Flush Catch Claw

270068289
062000302: RNCC: 2 | RNVC: 1

18 May 1999

5340-27-047-2911
Mounting Bracket

270472911
897245593051: RNCC: 2 | RNVC: 1

19 Nov 2009

5340-27-018-3458
Truss Fairlead

270183458
10121YM5561: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-024-3350
Mending Plate

270243350
L-109: RNCC: 2 | RNVC: 1

13 Oct 2004

5340-27-019-9277
Masking Plate

270199277
08001PA0343G: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-2607
Catch Strike

270542607
KARSILIK,UST: RNCC: 2 | RNVC: 2

16 Aug 2011

5340-27-023-6426
Lock-Release Lever

270236426
06598-3: RNCC: 2 | RNVC: 1

22 Jul 2004

5340-27-021-2149
Mounting Bracket

270212149
1012.1HSCA.03-49: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-058-8789
Catch Strike

270588789
31C15-57214-AA: RNCC: 2 | RNVC: 1

24 Apr 2013

5340-27-019-1203
Mounting Bracket

270191203
7335714144: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-040-4657
Mounting Bracket

270404657
10916565: RNCC: 2 | RNVC: 1

24 Jan 2008

5340-27-018-5083
Mounting Bracket

270185083
503060900: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-054-9267
Expansion Shield

270549267
15 LUL PLASTIK DUBEL: RNCC: 3 | RNVC: 1

24 Oct 2011

5340-27-040-8628
Mending Plate

270408628
ME013125: RNCC: 2 | RNVC: 1

3 Apr 2008

5340-27-048-4023
Mounting Bracket

270484023
388888865001: RNCC: 2 | RNVC: 1

5 Feb 2010

5340-27-050-2246
Mending Plate

270502246
02.195.1720: RNCC: 2 | RNVC: 1

8 Jul 2010

5340-27-034-8726
Elastic Strap

270348726
59227561: RNCC: 2 | RNVC: 1

13 Feb 2007

5340-27-029-8770
Mounting Bracket

270298770
10131YB0890: RNCC: 2 | RNVC: 1

2 Jun 2006

5340-27-050-3881
Mending Plate

270503881
107081: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-009-4887
Bail Handle

270094887
07002YK0961: RNCC: 2 | RNVC: 1

13 Jul 2001

5340-27-020-8481
Mounting Bracket

270208481
WQ483482T: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-014-1197
Bow Handle

270141197
7702128088: RNCC: 2 | RNVC: 1

11 Sep 2002

5340-27-008-3252
Mechanical Stop

270083252
TAKOZ: RNCC: 2 | RNVC: 1

18 Sep 2000

5340-27-054-0272
Mounting Bracket

270540272
55RS351080: RNCC: 2 | RNVC: 1

18 Jul 2011

5340-27-048-9662
Mending Plate

270489662
103703: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-005-1744
Spring Tension Clip

270051744
1010001850: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-053-3510
Mounting Bracket

270533510
H341205900: RNCC: 2 | RNVC: 1

20 Apr 2011

5340-27-057-0069
Mending Plate

270570069
98017231: RNCC: 2 | RNVC: 1

7 Jun 2012

5340-27-040-8012
Mending Plate

270408012
ME220161: RNCC: 2 | RNVC: 1

20 Mar 2008

5340-27-005-1726
Access Cover

270051726
1010000626: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-015-6804
Rod End Clevis

270156804
05001FV0011: RNCC: 2 | RNVC: 1
5741-7A: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-041-9460
Mounting Bracket

270419460
2-002-011: RNCC: 1 | RNVC: 2

2 Jul 2008

5340-27-023-1983
Butt Hinge Leaf

270231983
1010FK-1807632: RNCC: 2 | RNVC: 1

4 Jun 2004

5340-27-045-6255
Catch Strike

270456255
6A7995: RNCC: 5 | RNVC: 9

21 May 2009

5340-27-010-0841
Webbing Strap

270100841
05001HK0115: RNCC: 2 | RNVC: 1
25X1.5: RNCC: 2 | RNVC: 1

18 Mar 2002

5340-27-036-2378
Sliding Door Track

270362378
3C46E513A31BB: RNCC: 2 | RNVC: 1

15 May 2007

5340-27-048-9665
Mending Plate

270489665
103706: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-041-4332
Mending Plate

270414332
504105568: RNCC: 2 | RNVC: 1

23 May 2008

5340-27-015-6520
Butt Hinge

270156520
05001HM0036: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-015-0420
Loop Clamp

270150420
7727299: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-013-9125
Catch Strike

270139125
388880583101: RNCC: 2 | RNVC: 1

8 Aug 2002

5340-27-011-4851
Access Cover

270114851
4566232017: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-054-6873
Mounting Bracket

270546873
98021767: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-011-4934
Control Rod

270114934
4531140935: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-011-2428
Butt Hinge

270112428
07002YM0297: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-016-6780
Bridge Clamp

270166780
88.97440.0008: RNCC: 2 | RNVC: 1

26 Feb 2003

5340-27-059-6921
Loop Clamp

270596921
901-KL-395: RNCC: 2 | RNVC: 1

27 Sep 2013

5340-27-051-1977
Handle Grip

270511977
YM053: RNCC: 5 | RNVC: 9

8 Oct 2010

5340-27-018-6554
Mounting Bracket

270186554
1010FG-1201769: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-015-8030
Mounting Bracket

270158030
2106006101: RNCC: 2 | RNVC: 1

12 Dec 2002

5340-27-014-3732
Rod Retainer Clip

270143732
2T14 16828 AA: RNCC: 2 | RNVC: 1

9 Oct 2002

5340-27-011-0204
Angle Bracket

270110204
7115310184: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-021-4067
Mounting Bracket

270214067
1009.1KI.0131-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-9580
Synchro Clamp

270539580
H343301500: RNCC: 2 | RNVC: 1

11 Jul 2011

5340-27-050-3884
Mending Plate

270503884
108355: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-008-7476
Mending Plate

270087476
98000470: RNCC: 2 | RNVC: 1

5 Jan 2001

5340-27-026-2615
Mounting Bracket

270262615
1010FG-2963019: RNCC: 2 | RNVC: 1

23 Jun 2005

5340-27-050-0706
Mending Plate

270500706
104649: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-055-6126
Mounting Bracket

270556126
6C1117496AC: RNCC: 2 | RNVC: 1

16 Dec 2011

5340-27-023-5115
Mounting Bracket

270235115
1010FK-2810903: RNCC: 2 | RNVC: 1

8 Jul 2004

5340-27-057-7271
Mounting Bracket

270577271
733579 0371: RNCC: 2 | RNVC: 1

4 Oct 2012

5340-27-043-0231
Angle Bracket

270430231
40.780.4002: RNCC: 2 | RNVC: 1
40.780.4002: RNCC: 2 | RNVC: 1

25 Sep 2008

5340-27-025-1679
Mounting Bracket

270251679
10131YB0863: RNCC: 2 | RNVC: 1

24 Jan 2005

5340-27-025-3429
Mounting Bracket

270253429
2ABM 1MK 0042: RNCC: 2 | RNVC: 1

28 Feb 2005

5340-27-036-4464
Strap Hinge Leaf

270364464
108: RNCC: 5 | RNVC: 9

6 Jun 2007

5340-27-012-0663
Bow Handle

270120663
7700420975: RNCC: 2 | RNVC: 1

9 Jan 2002

5340-27-058-9839
Access Cover

270589839
VOE12741813: RNCC: 3 | RNVC: 2
VOE12741813: RNCC: 3 | RNVC: 2

10 May 2013

5340-27-055-9959
Bow Handle

270559959
5095819: RNCC: 2 | RNVC: 2

24 Jan 2012

5340-27-010-2933
Mending Plate

270102933
10131YS0830: RNCC: 2 | RNVC: 1

23 Nov 2001

5340-27-007-4342
Mounting Bracket

270074342
92AG 5A204 AA: RNCC: 2 | RNVC: 1

11 Nov 1999

5340-27-035-8994
Mechanical Stop

270358994
1010FK-1911215: RNCC: 2 | RNVC: 1

6 Apr 2007

5340-27-009-6547
Mounting Bracket

270096547
9033 57: RNCC: 2 | RNVC: 1

13 Aug 2001

5340-27-047-1755
Mounting Bracket

270471755
13C00-56162-AA: RNCC: 2 | RNVC: 1

10 Nov 2009

5340-27-008-8946
Support Hook

270088946
98001461-1: RNCC: 2 | RNVC: 1

12 Feb 2001

5340-27-017-3694
Pad Eye

270173694
1009.1IS.0052-3: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-017-3640
Mending Plate

270173640
1009.1IS.0068-B/30: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-018-9787
Mounting Bracket

270189787
422018-2: RNCC: 2 | RNVC: 1
422018-2: RNCC: 3 | RNVC: 1

15 Nov 2003

5340-27-007-1810
Retaining Clip

270071810
W 700917 S300: RNCC: 2 | RNVC: 1

15 Sep 1999

5340-27-022-1367
Angle Bracket

270221367
1.HIBM-1H-501: RNCC: 2 | RNVC: 1

12 Feb 2004

5340-27-013-3749
Sliding Door Track

270133749
1C15 V25004 AG: RNCC: 2 | RNVC: 1

10 Jun 2002

5340-27-017-3629
Mending Plate

270173629
1009.1IS.0059-9: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-041-7098
Rod End Clevis

270417098
1010FK-2810926-2: RNCC: 2 | RNVC: 1

12 Jun 2008

5340-27-017-8370
Angle Bracket

270178370
06489: RNCC: 2 | RNVC: 1

22 Sep 2003

5340-27-015-0425
Loop Clamp

270150425
7755399: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-042-6113
Loop Holder

270426113
1010006256: RNCC: 2 | RNVC: 1

1 Sep 2008

5340-27-021-4094
Mounting Bracket

270214094
1009.1KI.0306-2: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-015-0409
Loop Clamp

270150409
7714369: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-054-7629
Access Cover

270547629
100448: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-035-9558
Plug Button

270359558
183612960: RNCC: 2 | RNVC: 1

12 Apr 2007

5340-27-005-1491
Loop Clamp

270051491
1010000620: RNCC: 3 | RNVC: 2

14 Feb 1997

5340-27-051-1537
Mounting Bracket

270511537
16F00-58576-AA: RNCC: 2 | RNVC: 1

7 Oct 2010

5340-27-024-8028
Loop Clamp

270248028
KEL 03: RNCC: 2 | RNVC: 1

7 Dec 2004

5340-27-059-5081
Loop Clamp

270595081
VOE16004060: RNCC: 3 | RNVC: 2
VOE16004060: RNCC: 3 | RNVC: 2

26 Aug 2013

5340-27-023-5398
Webbing Strap

270235398
8690502: RNCC: 2 | RNVC: 1

10 Jul 2004

5340-27-042-5682
Mending Plate

270425682
54549738: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-023-8425
Expansion Plug

270238425
52RS001780: RNCC: 2 | RNVC: 1

12 Aug 2004

5340-27-050-0732
Mending Plate

270500732
108275: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-011-2429
Butt Hinge

270112429
07002YM0298: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-056-9753
Bow Handle

270569753
7T16K24648AAW: RNCC: 3 | RNVC: 2

6 Jun 2012

5340-27-018-8984
Antipilferage Seal

270188984
11051MM0003: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-019-0151
Control Rod

270190151
953942: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-023-0566
Access Cover

270230566
3152010303: RNCC: 2 | RNVC: 1
10121YK5878: RNCC: 2 | RNVC: 1

25 May 2004

5340-27-056-8678
Mending Plate

270568678
202264: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-029-0227
Bow Handle

270290227
12A14-57020-AA: RNCC: 2 | RNVC: 1

23 Feb 2006

5340-27-041-7616
Hinge Torsion Bar

270417616
OBK0016: RNCC: 2 | RNVC: 1

16 Jun 2008

5340-27-057-6364
Mending Plate

270576364
ALTFC01244: RNCC: 2 | RNVC: 1

14 Sep 2012

5340-27-038-7329
Mounting Bracket

270387329
4180679: RNCC: 2 | RNVC: 1

26 Oct 2007

5340-27-020-5454
Mending Plate

270205454
388882790001: RNCC: 2 | RNVC: 1

11 Dec 2003

5340-27-050-0555
Bow Handle

270500555
HD250188X: RNCC: 3 | RNVC: 2

21 Jun 2010

5340-27-019-6159
Handle Grip

270196159
05001HE0095: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-026-9085
Retaining Clip

270269085
W702036S309M: RNCC: 2 | RNVC: 1

9 Aug 2005

5340-27-008-2454
Angle Bracket

270082454
98010019: RNCC: 2 | RNVC: 1

24 Aug 2000

5340-27-056-8645
Mending Plate

270568645
203298: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-048-9663
Mending Plate

270489663
103704: RNCC: 3 | RNVC: 2

22 Mar 2010

5340-27-048-9238
Mounting Bracket

270489238
10029360: RNCC: 2 | RNVC: 1

18 Mar 2010

5340-27-011-0698
Mechanical Stop

270110698
7116220885: RNCC: 2 | RNVC: 1

18 Jun 2002

5340-27-006-9396
Mounting Bracket

270069396
95AG 9A697 AB: RNCC: 2 | RNVC: 1

29 Jun 1999

5340-27-054-4265
Mending Plate

270544265
98020069: RNCC: 3 | RNVC: 2

9 Sep 2011

5340-27-052-5570
Mounting Bracket

270525570
4592038931: RNCC: 2 | RNVC: 1

7 Feb 2011

5340-27-038-5099
Mounting Bracket

270385099
7701367311: RNCC: 2 | RNVC: 1

10 Oct 2007

5340-27-037-5454
Expansion Plug

270375454
90679-FA300: RNCC: 5 | RNVC: 9

6 Aug 2007

5340-27-058-7807
Access Cover

270587807
VOE12739484: RNCC: 3 | RNVC: 2

2 Apr 2013

5340-27-043-6800
Butt Hinge

270436800
SAG NO:12: RNCC: 2 | RNVC: 1

2 Dec 2008

5340-27-042-0113
Mortise Lock Set

270420113
ETEJER KILIT SISTEMI: RNCC: 2 | RNVC: 1

9 Jul 2008

5340-27-018-6732
Mounting Bracket

270186732
1010FK-1911576: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-050-6105
Mounting Bracket

270506105
336E69: RNCC: 2 | RNVC: 1

10 Aug 2010

5340-27-056-3753
Access Cover

270563753
3835031: RNCC: 3 | RNVC: 2

20 Mar 2012

5340-27-057-4378
Bridge Clamp

270574378
020700191400: RNCC: 2 | RNVC: 1

7 Aug 2012

5340-27-058-5374
Mounting Bracket

270585374
98022321: RNCC: 2 | RNVC: 1

19 Feb 2013

5340-27-048-2714
Loop Clamp

270482714
ERR5057-LD: RNCC: 3 | RNVC: 2

22 Jan 2010

5340-27-021-1902
Mounting Bracket

270211902
1012.1HSCA.02-26: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-015-8318
Expansion Shield

270158318
10131: RNCC: 2 | RNVC: 1
02TM10DBO1002: RNCC: 2 | RNVC: 1

15 May 2002

5340-27-020-8973
Mounting Bracket

270208973
1009.1KI.0349: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-053-2899
Mounting Bracket

270532899
H341156600: RNCC: 2 | RNVC: 1

15 Apr 2011

5340-27-014-7534
Roller Holder

270147534
514034001: RNCC: 2 | RNVC: 1

26 Nov 2002

5340-27-015-0415
Loop Clamp

270150415
7724764: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-050-3846
Mending Plate

270503846
101332: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-021-1071
Loop Clamp

270211071
05001DK0110: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-014-0887
Handle Grip

270140887
8K35351: RNCC: 2 | RNVC: 1
8M17536: RNCC: 2 | RNVC: 1

9 Sep 2002

5340-27-009-6118
Catch Strike

270096118
82368426: RNCC: 2 | RNVC: 1

3 Aug 2001

5340-27-014-8005
Mounting Bracket

270148005
LCB724: RNCC: 2 | RNVC: 1

2 Dec 2002

5340-27-057-7421
Mending Plate

270577421
25221058: RNCC: 2 | RNVC: 1

8 Oct 2012

5340-27-025-7791
Catch Strike

270257791
897852643051: RNCC: 2 | RNVC: 1

8 Apr 2005

5340-27-017-3879
Mounting Bracket

270173879
1009.1IS.0067-14: RNCC: 2 | RNVC: 1

19 Jun 2003

5340-27-021-0365
Mounting Bracket

270210365
1009.1KI.0339-14: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-038-2320
Mechanical Stop

270382320
1010FK-2702104: RNCC: 2 | RNVC: 1

21 Sep 2007

5340-27-042-0720
Key Holder

270420720
H32: RNCC: 2 | RNVC: 1

16 Jul 2008

5340-27-012-5544
Mounting Bracket

270125544
10131YS0731: RNCC: 2 | RNVC: 1

11 Feb 2002

5340-27-042-9476
Mounting Bracket

270429476
40.205.3475: RNCC: 2 | RNVC: 1
40.205.3475: RNCC: 2 | RNVC: 1

22 Sep 2008

5340-27-009-6638
Mounting Bracket

270096638
1807 F1: RNCC: 2 | RNVC: 1

14 Aug 2001

5340-27-032-5464
Butt Hinge

270325464
10.LUK YAPRAK: RNCC: 2 | RNVC: 1
YAPRAK MENTESE: RNCC: 2 | RNVC: 1
35X100MM YAPRAK: RNCC: 2 | RNVC: 1

3 Aug 2006

5340-27-021-7003
Strap Fastener Loop

270217003
2510 ATF 0070: RNCC: 2 | RNVC: 1

24 Dec 2003

5340-27-054-3651
Arched Cushion

270543651
98021596: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-053-9084
Strap Fastener Loop

270539084
D -8 MM: RNCC: 2 | RNVC: 1

6 Jul 2011

5340-27-020-5087
Strap Fastener Loop

270205087
1010007505: RNCC: 2 | RNVC: 1

10 Dec 2003

5340-27-017-4217
Corner Brace

270174217
EIBM-AA4-405L: RNCC: 2 | RNVC: 1

20 Jun 2003

5340-27-052-9642
Rope Cleat

270529642
901-IT-26-5: RNCC: 2 | RNVC: 1

10 Mar 2011

5340-27-040-6648
Strap Fastener Loop

270406648
1010006112: RNCC: 2 | RNVC: 1

21 Feb 2008

5340-27-054-3653
Arched Cushion

270543653
98021612: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-27-051-3228
Mounting Bracket

270513228
55RS860108: RNCC: 2 | RNVC: 1

15 Oct 2010

5340-27-057-5544
Mounting Bracket

270575544
M539F329400000: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-035-5299
Handle Ferrule

270355299
46528244: RNCC: 2 | RNVC: 1

16 Mar 2007

5340-27-013-2168
Flush Catch Claw

270132168
1010003234: RNCC: 2 | RNVC: 1

15 May 2002

5340-27-036-7969
Stand Base

270367969
40.205.3810: RNCC: 2 | RNVC: 1
40.205.3810: RNCC: 2 | RNVC: 1

28 Jun 2007

5340-27-003-9945
Pin Removable Head

270039945
10111YP8900: RNCC: 3 | RNVC: 2

29 Jun 1995

5340-27-021-9749
Compression Cup

270219749
22603: RNCC: 2 | RNVC: 1

16 Jan 2004

5340-27-006-9155
Mounting Bracket

270069155
96AG A22146 AA: RNCC: 2 | RNVC: 1

24 Jun 1999

5340-27-024-4673
Loop Clamp

270244673
MS21919DG2: RNCC: 2 | RNVC: 1

2 Nov 2004

5340-27-022-7352
Mending Plate

270227352
23V2216100: RNCC: 2 | RNVC: 1

14 Apr 2004

5340-27-025-4840
Strap Fastener Loop

270254840
90-009-4: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-054-6883
Arched Cushion

270546883
98019086: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-056-1129
Angle Bracket

270561129
C21A99: RNCC: 2 | RNVC: 1

14 Feb 2012

5340-27-056-4448
Mending Plate

270564448
202845: RNCC: 2 | RNVC: 2

28 Mar 2012

5340-27-045-9320
Loop Clamp

270459320
344OCT11209075: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-025-6718
Mounting Bracket

270256718
1010FG-2201541: RNCC: 2 | RNVC: 1

28 Mar 2005

5340-27-028-4234
Mounting Bracket

270284234
2ABMK01982: RNCC: 2 | RNVC: 1

30 Dec 2005

5340-27-025-8279
Rod End Clevis

270258279
05001FC0038: RNCC: 2 | RNVC: 1

15 Apr 2005

5340-27-021-8057
Mounting Bracket

270218057
1009 1YK 0975: RNCC: 2 | RNVC: 1

30 Dec 2003

5340-27-045-9305
Loop Clamp

270459305
5155A14: RNCC: 3 | RNVC: 2

22 Jun 2009

5340-27-058-7934
Mounting Bracket

270587934
55RS752892: RNCC: 2 | RNVC: 1

3 Apr 2013

5340-27-058-5439
Clamping Catch

270585439
VOE78685: RNCC: 3 | RNVC: 2
VOE78685: RNCC: 3 | RNVC: 2

19 Feb 2013

5340-27-036-4043
Mounting Bracket

270364043
46764050: RNCC: 2 | RNVC: 1

31 May 2007

5340-27-019-7914
Mounting Bracket

270197914
05001DP0029: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-049-0901
Catch Strike

270490901
7700434762: RNCC: 3 | RNVC: 2

31 Mar 2010

5340-27-004-5143
Access Cover

270045143
10121YS5433: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-27-025-1935
Flush Catch Claw

270251935
1010FK-1802082: RNCC: 2 | RNVC: 1

27 Jan 2005

5340-27-007-2078
Access Cover

270072078
87779 S80: RNCC: 2 | RNVC: 1

23 Sep 1999

5340-27-012-6879
Mounting Bracket

270126879
98011191: RNCC: 2 | RNVC: 1

5 Mar 2002

5340-27-058-6931
Mounting Bracket

270586931
25010313: RNCC: 2 | RNVC: 1

14 Mar 2013

5340-27-054-6872
Mounting Bracket

270546872
98021766: RNCC: 2 | RNVC: 2

7 Oct 2011

5340-27-036-1551
Mortise Lock

270361551
1128: RNCC: 2 | RNVC: 1

4 May 2007

5340-27-037-5442
Expansion Plug

270375442
16511-1G000: RNCC: 5 | RNVC: 9

6 Aug 2007

5340-27-043-9396
Mortise Lock

270439396
MANDALLI KILIT: RNCC: 2 | RNVC: 1

23 Dec 2008

5340-27-042-6364
Mounting Bracket

270426364
2ABEP00885: RNCC: 2 | RNVC: 1

2 Sep 2008

5340-27-024-3223
Mounting Bracket

270243223
1010FK-1811432: RNCC: 2 | RNVC: 1

13 Oct 2004

5340-27-054-7694
Access Cover

270547694
B67821061: RNCC: 2 | RNVC: 2

13 Oct 2011

5340-27-050-3852
Mending Plate

270503852
105226: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-045-5880
Bail Handle

270455880
400500133100(TIP3 CESIT2): RNCC: 2 | RNVC: 2

15 May 2009

5340-27-057-0070
Mending Plate

270570070
98017233: RNCC: 2 | RNVC: 1

7 Jun 2012

5340-27-034-2380
Crank Handle

270342380
81DBE23500AE: RNCC: 2 | RNVC: 1

19 Dec 2006

5340-27-015-0390
Loop Clamp

270150390
7392324: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-038-3305
Mounting Bracket

270383305
387003343001: RNCC: 2 | RNVC: 1

28 Sep 2007

5340-27-048-3039
Bow Handle

270483039
58RS600496: RNCC: 2 | RNVC: 1

28 Jan 2010

5340-27-053-9919
Support Hook

270539919
103236: RNCC: 2 | RNVC: 2

14 Jul 2011

5340-27-020-6310
Mounting Bracket

270206310
1009.1KI.0220-11*6: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-055-4932
Mounting Bracket

270554932
58RS510827: RNCC: 2 | RNVC: 1

8 Dec 2011

5340-27-008-5056
Angle Bracket

270085056
599903128130: RNCC: 2 | RNVC: 1

20 Oct 2000

5340-27-045-7468
Angle Bracket

270457468
10029149: RNCC: 2 | RNVC: 1

10 Jun 2009

5340-27-022-5168
Bridge Clamp

270225168
53132MBT610: RNCC: 2 | RNVC: 1
53132MBT610: RNCC: 5 | RNVC: 9

18 Mar 2004

5340-27-059-2629
Mending Plate

270592629
131322904: RNCC: 2 | RNVC: 1

2 Jul 2013

5340-27-042-5675
Mending Plate

270425675
54547393: RNCC: 2 | RNVC: 1

26 Aug 2008

5340-27-056-8706
Mending Plate

270568706
202261: RNCC: 2 | RNVC: 1

22 May 2012

5340-27-025-0268
Strap Fastener Loop

270250268
10131YT0525: RNCC: 2 | RNVC: 1

24 Dec 2004

5340-27-058-8280
Arched Cushion

270588280
10069973: RNCC: 2 | RNVC: 1
10069973: RNCC: 5 | RNVC: 9

10 Apr 2013

5340-27-059-4746
Loop Clamp

270594746
VOE3183622: RNCC: 3 | RNVC: 2
VOE3183622: RNCC: 3 | RNVC: 2

19 Aug 2013

5340-27-057-0026
Mending Plate

270570026
203644: RNCC: 2 | RNVC: 1

7 Jun 2012

5340-27-050-2567
Bow Handle

270502567
8200479789: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-27-028-2133
Mounting Bracket

270282133
7701511587: RNCC: 2 | RNVC: 1
7702188991: RNCC: 2 | RNVC: 1

14 Dec 2005

5340-27-018-6240
Mounting Bracket

270186240
1010FG-1401886: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-028-7993
Loop Clamp

270287993
71A70-76935-AA: RNCC: 2 | RNVC: 1

8 Feb 2006

5340-27-015-7297
Butt Hinge

270157297
GERMAN,SOL,100MM: RNCC: 2 | RNVC: 1
16001DM0099: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-010-2607
Mending Plate

270102607
10131YS0751: RNCC: 2 | RNVC: 1

21 Nov 2001

5340-27-049-1439
Mounting Bracket

270491439
5340KK0201130: RNCC: 2 | RNVC: 1

7 Apr 2010

5340-27-025-4886
Loop Clamp

270254886
MS21919DG11: RNCC: 2 | RNVC: 1

23 Mar 2005

5340-27-034-6116
Mounting Bracket

270346116
533A25: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-035-9601
Plug Button

270359601
128417688: RNCC: 2 | RNVC: 1

12 Apr 2007

5340-27-007-7788
Loop Clamp

270077788
10131YK0667: RNCC: 2 | RNVC: 1

17 Feb 2000

5340-27-035-7270
Mounting Bracket

270357270
098090: RNCC: 5 | RNVC: 9

27 Mar 2007

5340-27-014-1056
Bridge Clamp

270141056
EM BKT 32: RNCC: 2 | RNVC: 1
PPRC KELEPCE 32: RNCC: 2 | RNVC: 1
PPRC KELEPCE 32: RNCC: 2 | RNVC: 1

10 Sep 2002

5340-27-015-8475
Loop Clamp

270158475
1010004861: RNCC: 2 | RNVC: 1

17 Dec 2002

5340-27-059-6951
Flush Catch

270596951
24 V21 116 00: RNCC: 2 | RNVC: 1

30 Sep 2013

5340-27-046-9757
Mounting Bracket

270469757
897377329051: RNCC: 2 | RNVC: 1

24 Oct 2009

5340-27-057-5719
Mounting Bracket

270575719
M539F327800600: RNCC: 2 | RNVC: 1

4 Sep 2012

5340-27-028-2337
Recess Handle

270282337
5340-TJ1-06209: RNCC: 2 | RNVC: 1

15 Dec 2005

5340-27-021-2971
Snap Hook

270212971
7114133211: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-028-9379
Mounting Bracket

270289379
10121YP5601: RNCC: 2 | RNVC: 1

16 Feb 2006

5340-27-034-6104
Mounting Bracket

270346104
321E43: RNCC: 2 | RNVC: 1

29 Jan 2007

5340-27-055-6959
Access Cover

270556959
5093648: RNCC: 2 | RNVC: 2

29 Dec 2011

5340-27-015-0411
Loop Clamp

270150411
7716656: RNCC: 2 | RNVC: 1

10 Dec 2002

5340-27-019-9263
Access Cover

270199263
8331200437: RNCC: 2 | RNVC: 1

15 Nov 2003

5340-27-053-8540
Bumper

270538540
H346068500: RNCC: 2 | RNVC: 1

28 Jun 2011

5340-27-050-3869
Mending Plate

270503869
105328: RNCC: 3 | RNVC: 2

22 Jul 2010

5340-27-044-2282
Bow Handle

270442282
12E01-58509-AA: RNCC: 2 | RNVC: 1

16 Jan 2009

5340-27-036-3982
Loop Clamp

270363982
3588018: RNCC: 2 | RNVC: 1

30 May 2007

5340-27-021-4164
Angle Bracket

270214164
1010FG-1801068: RNCC: 2 | RNVC: 1

15 Dec 2003

5340-27-035-4832
Handle Grip

270354832
TTN71: RNCC: 2 | RNVC: 1

15 Mar 2007

Load More Results