5340-25-130-4369

5310-01-219-5408 5310012195408 012195408 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

3120-01-616-0673 3120016160673 016160673 is a detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. it is used to carry a load and to reduce sliding friction. it does not employ rolling elements. the item consists of a bored precision ground ball (or spherical plain bearing) around which an outer ring is fitted. the assembly may be either separable or nonseparable. excludes bearing, plain, rod end and bearing, plain, spherical.

3120-01-616-0317 3120016160317 016160317 is a detachable assembly in or on which a journal, gudgeon, pivot, or the like moves. it is used to carry a load and to reduce sliding friction. it does not employ rolling elements. the item consists of a bored precision ground ball (or spherical plain bearing) around which an outer ring is fitted. the assembly may be either separable or nonseparable. excludes bearing, plain, rod end and bearing, plain, spherical.