What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Leg Tip?

A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

Hardware, Commercial - Netherlands (NL)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Netherlands (NL) - NCB is 17

Page 27 of 31

NSN Format for Hardware, Commercial
Codified by Netherlands

53	40	17	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Netherlands (NL)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 37 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 102 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 40 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 44 Items
What is a Compression Cup? 18 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 30 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 104 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is a Metal Grille? 50 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 533 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 26 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 103 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 21 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 14 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 11 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Door Hook And Eye? 12 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Sliding Door Hanger? 49 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 15 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 22 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Flush Lock? 326 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 36 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 26 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 33 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 17 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 13 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 14 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Rope Cleat? 10 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 87 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 117 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 35 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 90 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 78 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 14 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Leg Tip? 17 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 25 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 80 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 216 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 96 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 88 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 47 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 30 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Support Hook? 11 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 40 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Plain Solid Disk? 76 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 676 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 18 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 74 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 310 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 67 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 216 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 77 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 53 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 11 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 10 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
Hook,Hammock 14 Items
What is a Catch Strike? 63 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 13 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Retaining Band? 45 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 98 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 10 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 43 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 222 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 30 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 22 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 521 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 81 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 35 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 12 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 73 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 179 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 28 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 59 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 18 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 40 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 95 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 46 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 42 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 10 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 13 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 412 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 13 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 13 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 11 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 100 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 12 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Seal Retaining Plate? 19 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 25 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 1072 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 16 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1177 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Synchro Clamp? 45 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 33 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 339 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 39 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is an Arched Cushion? 12 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Pipe Hanger? 78 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 20 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 16 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 46 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 13 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 45 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Sliding Block? 12 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 11 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 40 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 363 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 21 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 166 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 34 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 27 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Locking Stay? 41 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Sliding Door Hanger Section? 34 Items: A Sliding Door Hanger Section (HANGER SECTION,SLIDING DOOR) is an item specifically designed for use as a major component of a HANGER, SLIDING DOOR. It may contain ball rollers, springs, locking device(s), and mounting provisions.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Fouling Preventive Anode? 15 Items: A Fouling Preventive Anode (ANODE,FOULING PREVENTIVE) is an alloy rod which prevents any marine plants, animal and bacterial growth setting in heat exchangers, pumps, box coolers, and the like without damaging the environment. For anodes which prevent corrosion see ANODE, CORROSION PREVENTIVE.

Stock Items From Supply Class 5340 Page 27 of 31

5340-17-109-5897
Catch Strike

171095897
250041-180220.05: RNCC: 3 | RNVC: 2

28 Nov 1995

5340-17-104-1498
Access Cover

171041498
4070423: RNCC: 3 | RNVC: 2

15 Mar 1990

5340-17-114-1905
Mounting Plate

171141905
352232347490: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-17-116-3360
Mounting Plate

171163360
S553F1265101: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-17-106-0593
Handwheel

171060593
68116-1403-D19: RNCC: 3 | RNVC: 2

3 Dec 1991

5340-17-120-5742
Verloopplaat

171205742
ST 221105-007: RNCC: 3 | RNVC: 2

28 Jun 2007

5340-17-706-3102
Rim Lock

177063102
NO PRIMARY REF 17-706-3102: RNCC: 3 | RNVC: 2
37-00-40-65X34: RNCC: 5 | RNVC: 9
37-00-40: RNCC: 5 | RNVC: 9

15 Jan 1963

5340-17-108-2920
Bumper

171082920
0482000: RNCC: 3 | RNVC: 2
48-20: RNCC: 5 | RNVC: 9

19 Jul 1994

5340-17-103-4153
Cilinder Slot

171034153
SPE4453-ZWART-F827: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-17-117-2204
Mounting Bracket

171172204
AP1599LDW-401: RNCC: 3 | RNVC: 2
DUMMY PLATE FOR APR-39 ANTENNA: RNCC: 5 | RNVC: 1

17 Dec 2004

5340-17-123-1508
Escutcheon Plate

171231508
730212: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-17-109-8038
Cable Retractor

171098038
1163.05.15.01LEG05: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-17-120-4691
Manual Control Handle

171204691
161Y04101: RNCC: 3 | RNVC: 2

23 May 2007

5340-17-106-5204
Cap

171065204
352232477500: RNCC: 3 | RNVC: 2

24 Jun 1992

5340-17-116-3760
Dust And Moisture Seal Protective Cap-Plug

171163760
09-345-1050: RNCC: 3 | RNVC: 2
06010044-7: RNCC: 5 | RNVC: 2
11270815: RNCC: 5 | RNVC: 2

3 Feb 2004

5340-17-025-1892
Nut And Bolt Locking Plate

170251892
10301283: RNCC: 3 | RNVC: 1
N5-9-14X72: RNCC: 3 | RNVC: 1
N5-9-14X72X0-75: RNCC: 3 | RNVC: 2

14 Oct 1971

5340-17-110-8370
Bail Handle

171108370
161857: RNCC: 3 | RNVC: 2

15 Apr 1997

5340-17-105-6184
Access Cover

171056184
352233676660: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-17-114-1483
Spacing Threaded Standoff

171141483
352232424640: RNCC: 3 | RNVC: 2
3522 324 24640: RNCC: 5 | RNVC: 2

10 Jul 2001

5340-17-021-6587
Band Scharnier

170216587
FON7-7902: RNCC: 3 | RNVC: 2

6 May 1968

5340-17-116-6325
Lashing Belt

171166325
NO PRIMARY REF 17-116-6325: RNCC: 3 | RNVC: 2
D0-0240 ITEM 28: RNCC: 5 | RNVC: 2

29 Apr 2004

5340-17-105-0406
Steun

171050406
5182839: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-17-124-0919
Mounting Plate

171240919
2 0169-690: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-17-113-2762
Clamp Bolt Assembly

171132762
MAR-301-50.POS.5/6.: RNCC: 3 | RNVC: 2

1 May 2000

5340-17-109-6224
Houder Emmer Komple

171096224
250041-180240.00: RNCC: 3 | RNVC: 2

5 Dec 1995

5340-17-109-5137
Pipe Hanger

171095137
0840.602BLAD2-1514: RNCC: 3 | RNVC: 2
1514: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-114-7869
Mounting Plate

171147869
352243177600: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-17-114-6761
Block Clamp

171146761
352233031740: RNCC: 3 | RNVC: 2

25 Feb 2002

5340-17-114-9700
Mounting Plate

171149700
EBR31D8: RNCC: 3 | RNVC: 2

17 Jun 2002

5340-17-706-3721
Meubelknop Met Hout

177063721
NO PRIMARY REF 17-706-3721: RNCC: 3 | RNVC: 2
37-40-50-22: RNCC: 5 | RNVC: 9

27 Apr 1964

5340-17-114-6260
Access Cover

171146260
352233054920: RNCC: 3 | RNVC: 2

12 Feb 2002

5340-17-114-6184
Angle Bracket

171146184
352232679270: RNCC: 3 | RNVC: 2

12 Feb 2002

5340-17-054-2724
Angle Bracket

170542724
82352: RNCC: 3 | RNVC: 2

5 Apr 1983

5340-17-056-6287
Strip

170566287
F7960-120-003: RNCC: 3 | RNVC: 2

21 Nov 1995

5340-17-107-0602
Mounting Plate

171070602
VO-1504-A01: RNCC: 3 | RNVC: 2

23 Feb 1993

5340-17-104-7473
Webbing Strap

171047473
1136.122BL10TYPE1D3000MMVL160MM: RNCC: 3 | RNVC: 2

23 Oct 1990

5340-17-113-1922
Mounting Plate

171131922
962082: RNCC: 3 | RNVC: 2

13 Mar 2000

5340-17-029-8846
Loop Clamp

170298846
A10-52-527-03-0: RNCC: 3 | RNVC: 2
A1052-527-03-0: RNCC: 3 | RNVC: 2
A1052527030: RNCC: 3 | RNVC: 2
1150-10-52-527-03-0: RNCC: 3 | RNVC: 2
A10-52-527-03-0: RNCC: 6 | RNVC: 9
A10-52-527-03-0: RNCC: 6 | RNVC: 9

11 Jul 1974

5340-17-116-7717
Mounting Plate

171167717
VRI70A505: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-17-117-0969
Spacing Threaded Standoff

171170969
352232072940: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-17-104-4266
Koppel Tussenschot

171044266
24064060400: RNCC: 3 | RNVC: 2

19 Jun 1990

5340-17-102-7651
Schyf Sluiting

171027651
X12694-001: RNCC: 3 | RNVC: 2

29 Dec 1988

5340-17-053-6226
Speciaal Moer

170536226
352231104780: RNCC: 3 | RNVC: 2
VRI62A25: RNCC: 5 | RNVC: 2

26 Feb 1985

5340-17-054-0255
Klemplaat

170540255
0509147: RNCC: 3 | RNVC: 2
C468705FCNF2111: RNCC: 3 | RNVC: 2
509147: RNCC: 5 | RNVC: 9

7 Dec 1982

5340-17-106-5288
Spring Window Bolt

171065288
989661: RNCC: 3 | RNVC: 2
989661: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-17-111-3133
Mounting Plate

171113133
23AP0300003-0.38M: RNCC: 3 | RNVC: 2

14 Nov 1997

5340-17-124-6507
Spring Holder

171246507
S522F3106201: RNCC: 3 | RNVC: 2

30 Nov 2012

5340-17-114-4235
Manual Control Lever

171144235
352232592280: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-17-121-2841
Manual Control Lever

171212841
9551.00046: RNCC: 3 | RNVC: 2

7 May 2008

5340-17-107-2386
Key Blank

171072386
SV110KB509.364 PROFIEL 2: RNCC: 3 | RNVC: 2

4 May 1993

5340-17-110-2065
Webbing Strap

171102065
PVE009845-10T: RNCC: 3 | RNVC: 2
PVE009845: RNCC: 5 | RNVC: 1

5 Jun 1996

5340-17-049-0841
Spacing Threaded Standoff

170490841
089K06302: RNCC: 3 | RNVC: 2

14 Jan 1977

5340-17-114-7799
Metal Grille

171147799
352243047100: RNCC: 3 | RNVC: 2

15 Apr 2002

5340-17-107-2838
Retaining Strap

171072838
0844099: RNCC: 3 | RNVC: 2

25 May 1993

5340-17-053-6054
Systeemkoppeling As

170536054
NE112C11: RNCC: 3 | RNVC: 2
352231005900: RNCC: 5 | RNVC: 2

25 Feb 1985

5340-17-052-8702
Borgplaat

170528702
309.9792: RNCC: 3 | RNVC: 2
309.9792: RNCC: 5 | RNVC: 2

4 Oct 1982

5340-17-112-5528
Angle Bracket

171125528
1245641: RNCC: 3 | RNVC: 2

12 Apr 1999

5340-17-114-1488
Spacing Threaded Standoff

171141488
352232424830: RNCC: 3 | RNVC: 2
3522 324 24830: RNCC: 5 | RNVC: 2

10 Jul 2001

5340-17-117-0888
Retaining Strap

171170888
352232000860: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-17-032-0688
Retaining Strap

170320688
629759: RNCC: 3 | RNVC: 2

17 Jun 1972

5340-17-120-1634
Snap Hook

171201634
R024.001.009: RNCC: 3 | RNVC: 2

22 Feb 2007

5340-17-042-0676
Handle Grip

170420676
432208175750: RNCC: 3 | RNVC: 2

14 Jan 1973

5340-17-046-0182
Bridge Clamp

170460182
21119CLEG12: RNCC: 3 | RNVC: 2
21119CLEG12: RNCC: 5 | RNVC: 9

16 Dec 1974

5340-17-117-9415
Spring Tension Clip

171179415
C6-20-50796C: RNCC: 3 | RNVC: 2
FSPC6-20-50796C: RNCC: 5 | RNVC: 2

22 Sep 2005

5340-17-102-0288
Bumper

171020288
6001-0524-001: RNCC: 3 | RNVC: 2

3 Mar 1988

5340-17-120-8575
Handgreep

171208575
612-100-1720: RNCC: 3 | RNVC: 2

2 Nov 2007

5340-17-116-7803
Angle Bracket

171167803
352232464970: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-17-114-6327
Mounting Plate

171146327
166432: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-17-113-9609
Plain Solid Disk

171139609
242236: RNCC: 3 | RNVC: 2

13 Apr 2001

5340-17-117-0747
Angle Bracket

171170747
352232504090: RNCC: 3 | RNVC: 2
3522 325 04090: RNCC: 5 | RNVC: 2

24 Nov 2004

5340-17-117-5336
Mounting Bracket

171175336
664835: RNCC: 3 | RNVC: 2

21 Mar 2005

5340-17-051-4319
Ring

170514319
144J08200: RNCC: 3 | RNVC: 2

16 Jul 1980

5340-17-054-7304
Montagesteun

170547304
1613-1319-01: RNCC: 3 | RNVC: 2

26 Oct 1983

5340-17-125-0022
Double Angle Bracket

171250022
8007.6426: RNCC: 3 | RNVC: 2

25 Jul 2013

5340-17-113-9500
Angle Bracket

171139500
166992: RNCC: 3 | RNVC: 2

12 Apr 2001

5340-17-113-9546
Mounting Plate

171139546
169854: RNCC: 3 | RNVC: 2

12 Apr 2001

5340-17-125-0774
Spacing Threaded Standoff

171250774
2171 2301-802: RNCC: 3 | RNVC: 2

19 Sep 2013

5340-17-706-3319
Val Grendel

177063319
NO PRIMARY REF 17-706-3319: RNCC: 3 | RNVC: 2
34-04-16-150: RNCC: 5 | RNVC: 9

12 Oct 1963

5340-17-124-6407
Quick Release Plunger

171246407
100902120: RNCC: 3 | RNVC: 2

27 Nov 2012

5340-17-109-8452
L480 Geleidingsrail

171098452
1605-704-31: RNCC: 3 | RNVC: 2

20 Feb 1996

5340-17-114-7583
Mounting Bracket

171147583
352238021930: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-17-113-1845
Reservedelenset Han

171131845
T14902: RNCC: 3 | RNVC: 2

8 Mar 2000

5340-17-123-2538
Permanent Magnet

171232538
N4 02002 MAGNEET: RNCC: 3 | RNVC: 2

24 Aug 2010

5340-17-052-8902
Butt Hinge

170528902
X12113-403: RNCC: 3 | RNVC: 2

12 Oct 1982

5340-17-056-6349
Clamp

170566349
FON2-7331A06: RNCC: 3 | RNVC: 2

21 Nov 1995

5340-17-122-4526
Electronic Equipment Hardware Kit

171224526
INSTAL.KIT RES. 01: RNCC: 3 | RNVC: 2

31 Aug 2009

5340-17-114-1538
Access Cover

171141538
352232464280: RNCC: 3 | RNVC: 2
3522 324 64280: RNCC: 5 | RNVC: 2

10 Jul 2001

5340-17-109-7906
Flush Lock

171097906
20971-528-7030-2SL-SERIE23: RNCC: 3 | RNVC: 2

30 Jan 1996

5340-17-103-1369
Uitlyndop

171031369
PAC-002: RNCC: 3 | RNVC: 2

17 May 1989

5340-17-704-5936
Turnbuckle

177045936
N450-1B1: RNCC: 2 | RNVC: 1

21 Aug 1968

5340-17-118-2511
Multiple Angle Bracket

171182511
2 0058-041: RNCC: 3 | RNVC: 2

24 Jan 2006

5340-17-120-5704
Shelf Bracket

171205704
MY005: RNCC: 3 | RNVC: 2

27 Jun 2007

5340-17-120-5804
Magnetic Catch

171205804
226.000 DEURMAGNEET: RNCC: 3 | RNVC: 2

3 Jul 2007

5340-17-116-3448
Opzetstuk

171163448
01115: RNCC: 3 | RNVC: 2

20 Jan 2004

5340-17-124-5530
Mounting Bracket

171245530
352232612280: RNCC: 3 | RNVC: 2

25 Oct 2012

5340-17-124-1070
Mounting Bracket

171241070
GEF.201125015D: RNCC: 3 | RNVC: 2

12 Dec 2011

5340-17-103-4113
Drukcilinder Slot

171034113
DRC1136-F827: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-17-105-9542
Koppelbeugel

171059542
3080015: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-17-112-9333
Leakproof Seal Plug

171129333
07700017: RNCC: 3 | RNVC: 2

25 Nov 1999

5340-17-112-6509
Plafond Beugel

171126509
99300101: RNCC: 3 | RNVC: 2

10 Jun 1999

5340-17-114-1893
Airguide

171141893
352232338420: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-17-048-5483
Paneel Scharnier

170485483
A10-11-560-00-2M1: RNCC: 3 | RNVC: 2
85-800-0836: RNCC: 6 | RNVC: 9

5 Aug 1976

5340-17-106-3831
Flush Lock

171063831
KB514.049-6J20.42-49-105/9-2SL: RNCC: 3 | RNVC: 2

22 Apr 1992

5340-17-105-4762
Webbing Strap

171054762
G88039-T 392-A970: RNCC: 3 | RNVC: 2

23 Apr 1991

5340-17-052-5825
Voorhoofdste Houder

170525825
432208235670: RNCC: 3 | RNVC: 2

29 Apr 1982

5340-17-017-1660
Loop Clamp

170171660
6856019: RNCC: 3 | RNVC: 2

1 Aug 1975

5340-17-122-9201
Cylinder

171229201
TEK.1821.687.01 - PARTNR.4107: RNCC: 3 | RNVC: 2

16 Mar 2010

5340-17-123-5725
Lock-Release Lever

171235725
16K0694-15NA: RNCC: 3 | RNVC: 2

14 Feb 2011

5340-17-045-9790
Spacing Threaded Standoff

170459790
WW 416 881: RNCC: 3 | RNVC: 2

25 Feb 1975

5340-17-113-0685
Mechanical Stop

171130685
111.34.07.451: RNCC: 3 | RNVC: 2

10 Feb 2000

5340-17-044-0635
Espagnolet Slot

170440635
200-301LINKS: RNCC: 3 | RNVC: 2

27 May 1974

5340-17-103-1291
Spacing Threaded Standoff

171031291
1501SW124: RNCC: 3 | RNVC: 2

17 May 1989

5340-17-104-8959
Double Angle Bracket

171048959
352232143360: RNCC: 3 | RNVC: 2

27 Nov 1990

5340-17-120-2264
Swivel Caster

171202264
578 142: RNCC: 3 | RNVC: 2

14 Mar 2007

5340-17-106-2769
Webbing Strap

171062769
PVE010332-2: RNCC: 3 | RNVC: 2
PVE010332: RNCC: 4 | RNVC: 1
TVA5340-2-264-005: RNCC: 5 | RNVC: 9

25 Mar 1992

5340-17-116-4938
Afsluit Deksel

171164938
65274-9901-0000 WKT02: RNCC: 3 | RNVC: 2

23 Mar 2004

5340-17-113-9507
Mounting Plate

171139507
167591: RNCC: 3 | RNVC: 2

12 Apr 2001

5340-17-706-3689
Bail Handle

177063689
705L3 1-2: RNCC: 3 | RNVC: 2
705L3-1-2: RNCC: 5 | RNVC: 2

8 Jan 1964

5340-17-110-0902
Dust And Moisture Seal Protective Cap

171100902
048.007.131.006: RNCC: 3 | RNVC: 2

24 Apr 1996

5340-17-701-8464
Gesp Met Schroef Ga

177018464
GESPGASMASKERK: RNCC: 3 | RNVC: 2

30 Sep 1971

5340-17-103-5522
Retaining Strap

171035522
71393: RNCC: 3 | RNVC: 2

5 Sep 1989

5340-17-706-3156
Key Blank

177063156
NO PRIMARY REF 17-706-3156: RNCC: 3 | RNVC: 2
17-4-0-50MM: RNCC: 6 | RNVC: 9

18 Mar 1970

5340-17-106-5347
Webbing Strap

171065347
TVA5340-2-264-006: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-17-115-0666
Access Door Hinge

171150666
D0729-C399.22.09.13: RNCC: 3 | RNVC: 2

25 Jul 2002

5340-17-115-8712
Lock-Release Lever

171158712
HCD3/HANDEL/L170: RNCC: 3 | RNVC: 2

10 Jul 2003

5340-17-047-4691
Handle Grip

170474691
WN407529A: RNCC: 3 | RNVC: 2
WN407529A: RNCC: 5 | RNVC: 9

24 Oct 1975

5340-17-049-1706
Retaining Strap

170491706
233950: RNCC: 3 | RNVC: 2

11 Feb 1977

5340-17-027-9013
Handrem Palstang

170279013
NO PRIMARY REF 17-027-9013: RNCC: 3 | RNVC: 2
2730-2372-00: RNCC: 5 | RNVC: 2
2730-2372-00: RNCC: 5 | RNVC: 9

17 Aug 1987

5340-17-105-6201
Onderdelenuitrustin

171056201
SL5340-2-131-111: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-17-706-3291
Key Blank

177063291
NO PRIMARY REF 17-706-3291: RNCC: 3 | RNVC: 2
820M16X17X6: RNCC: 6 | RNVC: 9
820M16X17X6STIFT5-5: RNCC: 6 | RNVC: 9

11 Mar 1970

5340-17-107-3854
Mounting Plate

171073854
09 02 723.1: RNCC: 3 | RNVC: 2

13 Jul 1993

5340-17-608-7648
Sleutelring

176087648
N5-12-8-3X1 5: RNCC: 3 | RNVC: 2
345818-401-153LEG683: RNCC: 5 | RNVC: 1

18 Mar 1972

5340-17-102-8240
Deurkruksamenstel

171028240
GSV5459S-AL+6645Z-AL-STEL-PC75: RNCC: 3 | RNVC: 2

24 Jan 1989

5340-17-104-4727
Flush Lock

171044727
KB505.553-5H10.31-91-115/9-3SL: RNCC: 3 | RNVC: 2

10 Jul 1990

5340-17-121-7724
Y-Construktie

171217724
RING YS-1-28/40: RNCC: 3 | RNVC: 2

2 Dec 2008

5340-17-054-6402
Klauw

170546402
1348-30LEG14: RNCC: 3 | RNVC: 2

13 Sep 1983

5340-17-054-5975
Snap Hook

170545975
3447.644: RNCC: 3 | RNVC: 2

22 Aug 1983

5340-17-105-1607
Access Cover

171051607
5068987: RNCC: 3 | RNVC: 2

22 Jan 1991

5340-17-111-0768
Mortise Lock Set

171110768
390.001.250.425: RNCC: 3 | RNVC: 2

29 Jul 1997

5340-17-120-6041
Montagering

171206041
3811142: RNCC: 3 | RNVC: 2

11 Jul 2007

5340-17-110-5606
Angle Bracket

171105606
0661513: RNCC: 3 | RNVC: 2

13 Nov 1996

5340-17-114-2574
Angle Bracket

171142574
352232450340: RNCC: 3 | RNVC: 2

27 Aug 2001

5340-17-117-5463
Bumper

171175463
57778.010.010: RNCC: 3 | RNVC: 2
57778D10/10: RNCC: 5 | RNVC: 2

23 Mar 2005

5340-17-124-4968
Gasveer

171244968
8-18-190-600-PC-PC-650N: RNCC: 3 | RNVC: 2

14 Sep 2012

5340-17-107-2646
Padlock Set

171072646
1152.05-23-TYPE 5-GEMERKT F831P-: RNCC: 3 | RNVC: 1

18 May 1993

5340-17-121-3468
Clamping Catch

171213468
2 0140-643: RNCC: 3 | RNVC: 2

17 Jun 2008

5340-17-118-7859
Butt Hinge Leaf

171187859
115.50.07.214: RNCC: 3 | RNVC: 2

3 Aug 2006

5340-17-116-1401
Manual Control Handle

171161401
A45563: RNCC: 3 | RNVC: 2

24 Jul 2000

5340-17-122-7714
Filler Opening Cap

171227714
482040: RNCC: 3 | RNVC: 2

21 Dec 2009

5340-17-106-4878
Webbing Strap

171064878
X14095-409: RNCC: 3 | RNVC: 2

17 Jun 1992

5340-17-706-3593
Door Closer

177063593
NO PRIMARY REF 17-706-3593: RNCC: 3 | RNVC: 2
30-30-00YALE4: RNCC: 5 | RNVC: 9

17 Jan 1964

5340-17-016-2211
Klembeugel

170162211
FON2-7120: RNCC: 3 | RNVC: 2

3 Oct 1969

5340-17-105-9408
Padlock Set

171059408
KB511.723-6H12-112-215-4SL: RNCC: 3 | RNVC: 2

22 Oct 1991

5340-17-122-9848
Montageplaat

171229848
1575.700: RNCC: 3 | RNVC: 2

14 Apr 2010

5340-17-124-5251
Snap Hook

171245251
TG MRNZ08: RNCC: 3 | RNVC: 2

2 Oct 2012

5340-17-103-1396
Helical Compression Spring Seat

171031396
1504SW110: RNCC: 3 | RNVC: 2

17 May 1989

5340-17-114-6198
Access Cover

171146198
352233054030: RNCC: 3 | RNVC: 2

12 Feb 2002

5340-17-114-5624
Mounting Plate

171145624
352233325870: RNCC: 3 | RNVC: 2
3522 333 25870: RNCC: 5 | RNVC: 2

23 Jan 2002

5340-17-115-0899
Roller

171150899
6093-4: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-17-023-1708
Beugel

170231708
532240110039: RNCC: 3 | RNVC: 2
E2742670: RNCC: 3 | RNVC: 2
L2-742-67: RNCC: 3 | RNVC: 2
VBE431-143: RNCC: 3 | RNVC: 2
352250016975: RNCC: 5 | RNVC: 2
E274267: RNCC: 5 | RNVC: 9

17 Jun 1972

5340-17-056-6165
Fairlead

170566165
F8502-719-003: RNCC: 3 | RNVC: 2

21 Nov 1995

5340-17-055-1925
Padlock Set

170551925
5-4013-2GSLGEMERKTF813LHBH45MM: RNCC: 3 | RNVC: 2

13 Apr 1984

5340-17-107-2417
Key Blank

171072417
SV110KB514.932 PROFIEL 9: RNCC: 3 | RNVC: 2

4 May 1993

5340-17-053-6131
Drukplaat

170536131
352231010560: RNCC: 3 | RNVC: 2
VAG3A20: RNCC: 5 | RNVC: 2

25 Feb 1985

5340-17-114-1471
Mounting Plate

171141471
352232405330: RNCC: 3 | RNVC: 2
3522 324 05330: RNCC: 5 | RNVC: 2

10 Jul 2001

5340-17-106-5280
Plain Solid Disk

171065280
001-804000-6078-1: RNCC: 3 | RNVC: 2

1 Jul 1992

5340-17-115-4116
Permanent Magnet

171154116
914400: RNCC: 3 | RNVC: 2
STRIP,BLAUW,10X300MM: RNCC: 6 | RNVC: 9

30 Jan 2003

5340-17-705-4004
Loop Clamp

177054004
KLEMBEUGELVELDFLES: RNCC: 3 | RNVC: 2
KLEMBEUGELVELDFLES: RNCC: 5 | RNVC: 9

19 Feb 1974

5340-17-104-4146
Hand Crank

171044146
1136961: RNCC: 3 | RNVC: 2
5165987: RNCC: 3 | RNVC: 2

19 Jun 1990

5340-17-107-4309
Mounting Bracket

171074309
352238033210: RNCC: 3 | RNVC: 2

17 Aug 1993

5340-17-113-3015
Clamp

171133015
630/1/38899: RNCC: 3 | RNVC: 2

22 May 2000

5340-17-124-0102
Angle Bracket

171240102
2 0169-830: RNCC: 3 | RNVC: 2

25 Oct 2011

5340-17-120-7707
Butt Hinge

171207707
320090: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-17-115-9829
Angle Bracket

171159829
352236056920: RNCC: 3 | RNVC: 2
35223605692X: RNCC: 5 | RNVC: 2

9 Sep 2003

5340-17-114-3861
Mounting Bracket

171143861
352232479660: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-17-109-7946
Padlock

171097946
20971-777-7070-2SL-SERIE19: RNCC: 3 | RNVC: 2

30 Jan 1996

5340-17-116-3054
Support Front Cradl

171163054
120-B161+6245-55/20: RNCC: 3 | RNVC: 2

30 Dec 2003

5340-17-105-9849
Padlock Set

171059849
KB511.723-3H15-84-215-2SL: RNCC: 3 | RNVC: 2

5 Nov 1991

5340-17-103-6216
Stoel Voetstuk

171036216
FFVAOE-440396: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-17-109-7942
Padlock

171097942
20971-501-7070-2SL-SERIE10: RNCC: 3 | RNVC: 2

30 Jan 1996

5340-17-106-2746
Webbing Strap

171062746
NO PRIMARY REF 17-106-2746: RNCC: 3 | RNVC: 2
1001: RNCC: 5 | RNVC: 9

25 Mar 1992

5340-17-123-0280
Universal Adjustable Chock

171230280
VIBRACON SM16KM-LP-EV32-ID22: RNCC: 3 | RNVC: 9

6 May 2010

5340-17-122-5180
Door Handle

171225180
7.27.091.00: RNCC: 3 | RNVC: 2

29 Sep 2009

5340-17-053-3930
Geleider

170533930
352232089610: RNCC: 3 | RNVC: 2
352232089611: RNCC: 5 | RNVC: 1

5 Sep 1983

5340-17-111-9470
Strap Hinge

171119470
NO PRIMARY REF 17-111-9470: RNCC: 3 | RNVC: 2
VGPRO885.140.230.080: RNCC: 5 | RNVC: 9

18 Jun 1998

5340-17-117-3599
Shipping And Storage Container Twistlock

171173599
D 1/L: RNCC: 3 | RNVC: 2
LET00078: RNCC: 5 | RNVC: 2

20 Jan 2005

5340-17-056-6239
Plate

170566239
F8503-518-001: RNCC: 3 | RNVC: 2

21 Nov 1995

5340-17-104-2131
Manual Control Handle

171042131
1152.113BLAD63: RNCC: 3 | RNVC: 2

3 Apr 1990

5340-17-027-0408
Plunjerknop

170270408
162042: RNCC: 3 | RNVC: 2
162042: RNCC: 5 | RNVC: 9

17 Jun 1972

5340-17-108-5125
Mounting Plate

171085125
163008: RNCC: 3 | RNVC: 2

15 Nov 1994

5340-17-055-3119
Beam Gripping Clamp

170553119
3-15.778: RNCC: 3 | RNVC: 2

29 Jun 1984

5340-17-108-9442
Telescopische Arm

171089442
L-615: RNCC: 3 | RNVC: 2
0100135: RNCC: 5 | RNVC: 2

23 May 1995

5340-17-121-7484
Angle Bracket

171217484
ISO8434-1-E-S6-ST-A3P: RNCC: 2 | RNVC: 2

21 Nov 2008

5340-17-104-2581
Mortier. Draagriem

171042581
6371-7: RNCC: 3 | RNVC: 2
6371-7: RNCC: 5 | RNVC: 2
6371-7: RNCC: 5 | RNVC: 9

18 Apr 1990

5340-17-050-6885
Flush Lock

170506885
GSV2861GH3SLEUTELSF812: RNCC: 3 | RNVC: 2

24 Apr 1979

5340-17-106-6006
Access Cover

171066006
0694552: RNCC: 3 | RNVC: 2
694552: RNCC: 3 | RNVC: 2

12 Aug 1992

5340-17-103-4900
Webbing Strap

171034900
G88039-T394-A880: RNCC: 3 | RNVC: 2
TYPE 3: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-17-706-3685
Bow Handle

177063685
1437-23L125: RNCC: 3 | RNVC: 2
30-86-25-125: RNCC: 5 | RNVC: 9
30-8625L125: RNCC: 5 | RNVC: 9

21 Jun 1963

5340-17-124-6009
Mounting Plate

171246009
856768: RNCC: 3 | RNVC: 2

23 Nov 2012

5340-17-121-5710
Door Hook

171215710
1009 TBV 1300: RNCC: 3 | RNVC: 2

11 Sep 2008

5340-17-105-6016
Detent Plunger

171056016
100.443.103: RNCC: 3 | RNVC: 2

5 Jun 1991

5340-17-120-5573
Pipe Hanger

171205573
596270: RNCC: 3 | RNVC: 2

19 Jun 2007

5340-17-115-1793
Dust And Moisture Seal Protective Plug

171151793
0450-750: RNCC: 3 | RNVC: 2

4 Oct 2002

5340-17-109-5118
Retaining Strap

171095118
0840.602BLAD3-1494: RNCC: 3 | RNVC: 2
1494: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-112-1168
Padlock Set

171121168
R30932-2A06-7070-2SL-SERIE128: RNCC: 3 | RNVC: 2

29 Sep 1998

5340-17-054-4789
Geleideprofiel

170544789
44-3-983: RNCC: 3 | RNVC: 2

27 Jun 1983

5340-17-121-3725
Mounting Plate

171213725
16K018: RNCC: 3 | RNVC: 2

30 Jun 2008

5340-17-114-8335
Mounting Plate

171148335
352233438750: RNCC: 3 | RNVC: 2

7 May 2002

5340-17-106-7802
Verzegelset

171067802
8582.102: RNCC: 3 | RNVC: 2

18 Nov 1992

5340-17-117-0883
Spacing Threaded Standoff

171170883
352231518370: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-17-034-2857
Angle Bracket

170342857
NO PRIMARY REF 17-034-2857: RNCC: 3 | RNVC: 2
K101026: RNCC: 5 | RNVC: 2

15 Apr 1969

5340-17-120-2221
Pipe Hanger

171202221
33241: RNCC: 3 | RNVC: 2
BKI 12X95: RNCC: 5 | RNVC: 2

13 Mar 2007

5340-17-102-0082
Achteruit Arm Steun

171020082
CD224101: RNCC: 3 | RNVC: 2
0513503: RNCC: 3 | RNVC: 2
513503: RNCC: 5 | RNVC: 9

23 Feb 1988

5340-17-110-2393
Dust And Moisture Seal Protective Cap-Plug

171102393
114.40.07.023: RNCC: 3 | RNVC: 2

19 Jun 1996

5340-17-120-9261
Scharnier

171209261
1189635: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-17-022-3092
Webbing Strap

170223092
SVTG1456-510MM: RNCC: 3 | RNVC: 2
SVTG1456B: RNCC: 3 | RNVC: 2

17 Jun 1972

5340-17-120-1227
Montageplaat

171201227
698-290-1350: RNCC: 3 | RNVC: 2

8 Feb 2007

5340-17-120-3968
Padlock Set

171203968
2 0106-082: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-17-103-5195
Hendel Compleet

171035195
FFVAOE-340443: RNCC: 3 | RNVC: 2

23 Aug 1989

5340-17-109-7935
Padlock Set

171097935
20971-886-7070-2SL-SERIE36: RNCC: 3 | RNVC: 2

30 Jan 1996

5340-17-110-5155
Yoke

171105155
F9036-233-003: RNCC: 3 | RNVC: 2

16 Oct 1996

5340-17-706-3641
Butt Hinge

177063641
NO PRIMARY REF 17-706-3641: RNCC: 3 | RNVC: 2

31 May 1963

5340-17-120-4819
Mounting Bracket

171204819
1154-011-014: RNCC: 3 | RNVC: 2

30 May 2007

5340-17-118-9942
Rigid Caster

171189942
BS-GTH202K: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-17-121-2756
Mounting Plate

171212756
184-4776: RNCC: 3 | RNVC: 2
15012440: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-17-107-2755
Padlock Set

171072755
1152.05-22-TYPE 4-GEMERKT F830S-: RNCC: 3 | RNVC: 1

18 May 1993

5340-17-116-1485
Mending Plate

171161485
698-200-2220: RNCC: 3 | RNVC: 2

24 Jul 2000

5340-17-054-9641
Flush Lock

170549641
GSV2861GHGR24SLEUTELNR0901F813: RNCC: 3 | RNVC: 2

2 Feb 1984

5340-17-105-9599
Puller

171059599
352232197950: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-17-120-1003
Ventilatie Rooster

171201003
G61-5008 AA (FA.GAVO): RNCC: 3 | RNVC: 2

2 Feb 2007

5340-17-054-5396
Steunrol

170545396
44-4-428: RNCC: 3 | RNVC: 2
944428: RNCC: 5 | RNVC: 2

22 Jul 1983

5340-17-017-8536
Nut And Bolt Locking Plate

170178536
10301292: RNCC: 3 | RNVC: 2
N5-9-14X95: RNCC: 3 | RNVC: 2

26 Jul 1972

5340-17-118-8093
Bracket

171188093
352232336760: RNCC: 3 | RNVC: 2

11 Aug 2006

5340-17-707-3640
Clamping Catch

177073640
U2-57-2B: RNCC: 2 | RNVC: 2
10340453: RNCC: 3 | RNVC: 2
U2-12-2B: RNCC: 5 | RNVC: 9
U2-12-N2B: RNCC: 5 | RNVC: 9

14 Oct 1971

5340-17-119-0011
Bumper

171190011
GMT TYPE D 75X36 M12X37: RNCC: 3 | RNVC: 2

10 Oct 2006

5340-17-054-0862
Door Handle

170540862
1117.328LEG3-7: RNCC: 3 | RNVC: 2

4 Jan 1983

5340-17-051-5453
Retaining Strap

170515453
1005C015B: RNCC: 3 | RNVC: 2

18 Sep 1980

5340-17-107-4962
Bakken Rek

171074962
06 52 100: RNCC: 3 | RNVC: 2

31 Aug 1993

5340-17-107-6018
Mechanical Stop

171076018
5207636: RNCC: 3 | RNVC: 2

26 Oct 1993

5340-17-706-3703
Recess Handle

177063703
773: RNCC: 3 | RNVC: 2
30-87-79: RNCC: 5 | RNVC: 9

26 Apr 1964

5340-17-106-9425
Webbing Strap

171069425
450.000.005.006: RNCC: 3 | RNVC: 2
37074-10: RNCC: 5 | RNVC: 2

19 Jan 1993

5340-17-123-7141
Angle Bracket

171237141
4S0099P100006: RNCC: 3 | RNVC: 2

6 May 2011

5340-17-105-6619
Mounting Bracket

171056619
352233712420: RNCC: 3 | RNVC: 2

25 Jun 1991

5340-17-111-8768
Captive Screw Assy

171118768
53-11-611-24: RNCC: 3 | RNVC: 2

15 May 1998

5340-17-123-7885
Expansion Plug

171237885
BRD-NI-25-1TF: RNCC: 3 | RNVC: 2

21 Jun 2011

5340-17-048-8037
Flush Lock

170488037
1906-C321LINKS: RNCC: 3 | RNVC: 2
BDRIEKANTH00GTE78MM: RNCC: 5 | RNVC: 9
W1-51-4-121BL8-17-42-45LINKS: RNCC: 5 | RNVC: 9

2 Nov 1976

5340-17-053-7867
Dust And Moisture Seal Protective Plug

170537867
NO PRIMARY REF17-053-7867: RNCC: 3 | RNVC: 2
120686-8: RNCC: 5 | RNVC: 9

2 Oct 1986

5340-17-123-6167
Stanchion Foot

171236167
D026-06 ITEM 8: RNCC: 3 | RNVC: 2

10 Mar 2011

5340-17-706-3472
Coat And Hat Hook

177063472
72-14HPL: RNCC: 3 | RNVC: 2

8 May 1964

5340-17-103-8428
Barrel Bolt

171038428
2600/4-50 MM: RNCC: 3 | RNVC: 2
8713515017570: RNCC: 3 | RNVC: 2

15 Dec 1989

5340-17-100-7544
Retaining Strap

171007544
NX36695: RNCC: 3 | RNVC: 2

21 May 1986

5340-17-106-7745
Swivel Caster

171067745
190373K: RNCC: 3 | RNVC: 2

18 Nov 1992

5340-17-049-9007
Geleidebus

170499007
0644R2-30: RNCC: 3 | RNVC: 2
1000-9: RNCC: 5 | RNVC: 2
0644R2-30: RNCC: 5 | RNVC: 2

20 Apr 1978

5340-17-105-0027
Expansion Shield

171050027
352243527000: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-17-118-3474
Retaining Band

171183474
062-014ITEM406: RNCC: 3 | RNVC: 2

22 Feb 2006

5340-17-103-2880
Padlock Set

171032880
KB508.375-5L55-34-215-2SL: RNCC: 3 | RNVC: 2

23 Jun 1989

5340-17-109-7893
Flush Lock

171097893
20971-432-7030-2SL-SERIE6: RNCC: 3 | RNVC: 2

30 Jan 1996

5340-17-121-7705
Arched Cushion

171217705
K11 16-02-S2: RNCC: 3 | RNVC: 2

2 Dec 2008

5340-17-106-3538
Klinknagel Stift

171063538
875.1277: RNCC: 3 | RNVC: 2
5721040442: RNCC: 5 | RNVC: 2

8 Apr 1992

5340-17-105-2442
Bow Handle

171052442
0890084: RNCC: 3 | RNVC: 2

7 Feb 1991

5340-17-125-1026
Dust And Moisture Seal Protective Cap

171251026
8005.1031: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-17-123-6317
Shipping And Storage Container Twistlock

171236317
LET00205: RNCC: 3 | RNVC: 2
62600356: RNCC: 5 | RNVC: 2
K-19663: RNCC: 5 | RNVC: 2

22 Mar 2011

5340-17-054-8851
Drukplaat

170548851
55-4-128: RNCC: 3 | RNVC: 2

3 Jan 1984

5340-17-114-8924
Lock Key

171148924
DRINKWATERKOELER E12 RUIMTE 3351: RNCC: 3 | RNVC: 2

28 May 2002

5340-17-114-9905
Dust And Moisture Seal Boot

171149905
1277146: RNCC: 3 | RNVC: 2
DF1277146: RNCC: 5 | RNVC: 2

21 Jun 2002

5340-17-051-6653
Butt Hinge Leaf

170516653
158M01500: RNCC: 3 | RNVC: 2

5 Jan 1981

5340-17-110-3638
Mounting Plate

171103638
SL2530-2-131-287: RNCC: 3 | RNVC: 2

21 Aug 1996

5340-17-101-7010
Catch Strike

171017010
6001-0661-002: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-17-054-5685
Loop Clamp

170545685
251270012025: RNCC: 3 | RNVC: 2
H2V: RNCC: 5 | RNVC: 2

4 Aug 1983

5340-17-108-5332
Retaining Strap

171085332
163035: RNCC: 3 | RNVC: 2

22 Nov 1994

5340-17-049-1653
Klemplaat

170491653
233817: RNCC: 3 | RNVC: 2

8 Feb 1977

5340-17-049-0582
Dust And Moisture Seal Protective Cap-Plug

170490582
8811: RNCC: 3 | RNVC: 2
Q314162311: RNCC: 5 | RNVC: 2

5 Jan 1977

5340-17-101-7168
Bumper

171017168
0173278: RNCC: 3 | RNVC: 2
173278: RNCC: 5 | RNVC: 9

24 Sep 1987

5340-17-107-3964
Dakplaat

171073964
SL5340-2-121-001: RNCC: 3 | RNVC: 2

13 Jul 1993

5340-17-116-5890
Haak Steun

171165890
612-100-2580: RNCC: 3 | RNVC: 2

22 Apr 2004

5340-17-105-5897
Mounting Bracket

171055897
352232601690: RNCC: 3 | RNVC: 2

5 Jun 1991

5340-17-104-3190
Angle Bracket

171043190
352232665571: RNCC: 3 | RNVC: 2

10 May 1990

5340-17-052-0169
Extension Drawer Slide Section

170520169
392249000121: RNCC: 3 | RNVC: 2
482246230115: RNCC: 5 | RNVC: 1
532246230115: RNCC: 5 | RNVC: 1

6 Feb 1980

5340-17-101-3162
Handwheel

171013162
AS-A377-113-3: RNCC: 3 | RNVC: 2

7 Apr 1987

5340-17-114-4465
Profiel

171144465
X32044-093: RNCC: 3 | RNVC: 2

9 Nov 2001

5340-17-109-7724
Flush Lock

171097724
20971-224-7030-2SL-SERIE4-VL1010: RNCC: 3 | RNVC: 2

23 Jan 1996

5340-17-124-6737
Assembly Bracket

171246737
P107594: RNCC: 3 | RNVC: 2

21 Dec 2012

5340-17-113-2894
Mounting Plate

171132894
352236048700: RNCC: 3 | RNVC: 2

11 May 2000

5340-17-123-6052
Block Clamp

171236052
RAP12-106: RNCC: 3 | RNVC: 2

3 Mar 2011

5340-17-122-3517
Mounting Bracket

171223517
2 0156-147: RNCC: 3 | RNVC: 2

20 Jul 2009

5340-17-103-9095
Access Cover

171039095
79.131.1-13LEG3: RNCC: 3 | RNVC: 2

17 Jan 1990

5340-17-114-8444
Buckle

171148444
NO PRIMARY REF 17-114-8444: RNCC: 3 | RNVC: 2
08.003: RNCC: 5 | RNVC: 9

8 May 2002

5340-17-103-6276
Scharnierblok

171036276
FFVAOE-440311: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-17-102-0661
Furniture Leg Tip

171020661
NO PRIMARY REF 17-102-0661: RNCC: 3 | RNVC: 2
50S: RNCC: 5 | RNVC: 9

9 Mar 1988

5340-17-111-0667
Flush Catch

171110667
Z01.60.13.699: RNCC: 3 | RNVC: 2

29 Jul 1997

5340-17-117-1453
Spacing Threaded Standoff

171171453
352233637310: RNCC: 3 | RNVC: 2
3522 336 37310: RNCC: 5 | RNVC: 2

10 Dec 2004

5340-17-114-6581
Mounting Plate

171146581
352233135090: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-17-120-2178
Mounting Plate

171202178
DV67-09: RNCC: 3 | RNVC: 2

13 Mar 2007

5340-17-124-5388
Ratchet Strap

171245388
MRP6639-004: RNCC: 3 | RNVC: 2

16 Oct 2012

5340-17-107-2756
Padlock Set

171072756
1152.05-22-TYPE 4-GEMERKT F831S-: RNCC: 3 | RNVC: 1

18 May 1993

5340-17-107-1720
Flush Lock

171071720
KB516.869-6J10.12-39-110/9-2SL: RNCC: 3 | RNVC: 2

6 Apr 1993

5340-17-112-3282
Spanschroef

5340-17-109-7358
Deur Haak En Oog

5340-17-111-7081
Stangei Koppelstuk

5340-17-113-6360
Verzegelset

171136360
8582.151: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-17-055-3426
Webbing Strap

170553426
B20.02BL26-1LEG6: RNCC: 3 | RNVC: 2

12 Jul 1984

5340-17-102-3396
Manual Control Handle

171023396
XX004-4826: RNCC: 3 | RNVC: 2

8 Jun 1988

5340-17-108-0467
Pipe Hanger

171080467
036723B: RNCC: 3 | RNVC: 2
20045286: RNCC: 3 | RNVC: 2

19 Apr 1994

5340-17-118-0217
Mounting Plate

171180217
34116: RNCC: 3 | RNVC: 2

25 Oct 2005

5340-17-114-4099
Access Cover

171144099
352232536470: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-17-114-8919
Padlock

171148919
8402: RNCC: 3 | RNVC: 2

28 May 2002

5340-17-101-6379
Kabelhaak

171016379
2540 198 013: RNCC: 3 | RNVC: 2
80212: RNCC: 5 | RNVC: 2

18 Aug 1987

5340-17-101-2196
Glystuk Samenstel

171012196
1433.315BLAD3: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-17-111-4087
Manual Control Handle

171114087
24975: RNCC: 3 | RNVC: 2

9 Jan 1998

5340-17-107-9682
Mounting Bracket

171079682
0377261: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-17-108-3116
Spacing Threaded Standoff

171083116
352236044180: RNCC: 3 | RNVC: 2
3522 360 44180: RNCC: 5 | RNVC: 2

26 Jul 1994

5340-17-117-7085
Mending Plate

171177085
16C880: RNCC: 3 | RNVC: 2

31 May 2005

5340-17-115-2932
Mounting Bracket

171152932
99221474+99221206: RNCC: 3 | RNVC: 2

26 Nov 2002

5340-17-113-7450
Access Cover

171137450
W004305700: RNCC: 3 | RNVC: 2

9 Jan 2001

5340-17-106-3825
Flush Lock

171063825
KB514.049-5K10.22-7-110/9-2SL: RNCC: 3 | RNVC: 2

22 Apr 1992

5340-17-107-8174
Dust And Moisture Seal Protective Cap

171078174
0622409: RNCC: 3 | RNVC: 2

1 Feb 1994

5340-17-054-2461
Webbing Strap

170542461
81276: RNCC: 3 | RNVC: 2

24 Mar 1983

5340-17-116-4999
Block Clamp

171164999
FON2-7121-6: RNCC: 3 | RNVC: 2
FON2-7121-6: RNCC: 5 | RNVC: 9

24 Mar 2004

5340-17-107-2653
Padlock Set

171072653
1152.05-23-TYPE 5-GEMERKT F830S-: RNCC: 3 | RNVC: 1

18 May 1993

5340-17-116-9433
Ball Socket Seat

171169433
A377-113A: RNCC: 3 | RNVC: 2

23 Sep 2004

5340-17-045-9969
Draad Veer

170459969
432208147250: RNCC: 3 | RNVC: 2

18 Nov 1974

5340-17-107-2768
Padlock

171072768
1152.05-22-TYPE 4-GEMERKT F827Z-: RNCC: 3 | RNVC: 1

18 May 1993

5340-17-114-3883
Double Angle Bracket

171143883
352232587330: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-17-103-4152
Cilinder Slot

171034152
SPE4464-ZWART-F834: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-17-103-4166
Cilinder Slot

171034166
SPE4453-ROOD-F832: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-17-035-2839
Dust And Moisture Seal Protective Plug

170352839
4RM959EV5-481: RNCC: 3 | RNVC: 2

2 Dec 1969

5340-17-101-9507
Synchro Clamp

171019507
VL3347-A01: RNCC: 3 | RNVC: 2

27 Jan 1988

5340-17-056-5970
Fairlead

170565970
FON6-7950-06: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-027-0893
Butt Hinge

170270893
1150-10-19-713-00-1: RNCC: 3 | RNVC: 2
A10-19-713-00-1: RNCC: 3 | RNVC: 2
A1019713001: RNCC: 3 | RNVC: 2
A10-19-713-00-1: RNCC: 6 | RNVC: 9
A10-19-713-00-1: RNCC: 6 | RNVC: 9

25 Jul 1974

5340-17-120-2783
Manual Control Handle

171202783
690-090-0690: RNCC: 3 | RNVC: 2

22 Mar 2007

5340-17-108-5220
Mounting Plate

171085220
9122 2303-02: RNCC: 3 | RNVC: 2

15 Nov 1994

5340-17-100-0045
Bumper

171000045
1517083: RNCC: 3 | RNVC: 2
51268: RNCC: 3 | RNVC: 2

1 Jan 2000

5340-17-113-0218
Double Angle Bracket

171130218
7316588: RNCC: 3 | RNVC: 2
95VB8284BC: RNCC: 5 | RNVC: 2

19 Jan 2000

5340-17-015-9786
Deksel

170159786
5046153: RNCC: 3 | RNVC: 2
1121316: RNCC: 3 | RNVC: 2

17 Jun 1972

5340-17-051-0821
Spanjolet Stang

170510821
X10985-031: RNCC: 3 | RNVC: 2

15 Nov 1979

5340-17-118-0131
Nut And Bolt Head Protective Cap

171180131
1005-005: RNCC: 3 | RNVC: 2

21 Oct 2005

5340-17-109-6382
Steun

171096382
0840.691BLAD2-3452: RNCC: 3 | RNVC: 2
3452: RNCC: 3 | RNVC: 2

12 Dec 1995

5340-17-105-1610
Access Cover

171051610
4079219: RNCC: 3 | RNVC: 2

22 Jan 1991

5340-17-114-0093
Manual Control Handle

171140093
551848: RNCC: 3 | RNVC: 2

24 Apr 2001

5340-17-055-1329
Schuifgesp

170551329
NO PRIMARY REF 17-055-1329: RNCC: 3 | RNVC: 2
M0502-20-3LEG10: RNCC: 5 | RNVC: 9

27 Mar 1984

5340-17-116-7495
Bridge Clamp

171167495
FON2-7109S: RNCC: 3 | RNVC: 2
FON2-7109S: RNCC: 5 | RNVC: 9

15 Jun 2004

5340-17-103-4029
Deurkruksamenstel

171034029
NO PRIMARY REF 17-103-4029: RNCC: 3 | RNVC: 2
356+200/1X7PC+200/1X7BLIND: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-17-056-6025
Rod End

170566025
FON6-2128R05KG: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-706-3371
Key Holder

177063371
XX3168-16MMST0CK0: RNCC: 3 | RNVC: 2

17 Jun 1972

5340-17-119-0466
Angle Bracket

171190466
0628306: RNCC: 3 | RNVC: 2
FS0006028: RNCC: 6 | RNVC: 9

25 Oct 2006

5340-17-114-1561
Retaining Strap

171141561
352232506920: RNCC: 3 | RNVC: 2
3522 325 06920: RNCC: 5 | RNVC: 2

10 Jul 2001

5340-17-102-8230
Deurkruksamenstel

5340-17-050-8335
Plaat

170508335
352232566430: RNCC: 3 | RNVC: 2

11 Jul 1979

5340-17-050-1561
Access Cover

170501561
0118975: RNCC: 3 | RNVC: 2
118975: RNCC: 5 | RNVC: 9

23 Feb 1978

5340-17-115-4994
Locking Device

171154994
90134.700.07.00: RNCC: 3 | RNVC: 2

26 Feb 2003

5340-17-118-2345
Retaining Strap

171182345
3447624: RNCC: 3 | RNVC: 2

16 Jan 2006

5340-17-107-6045
Snap Hook

171076045
BS5340-2-262-016: RNCC: 3 | RNVC: 2

26 Oct 1993

5340-17-123-6184
Angle Bracket

171236184
30216-0: RNCC: 3 | RNVC: 2

15 Mar 2011

5340-17-103-3392
Angle Bracket

171033392
352235126650: RNCC: 3 | RNVC: 2
EFJ3A28: RNCC: 5 | RNVC: 2

11 Jul 1989

5340-17-115-7667
Retaining Strap

171157667
S551F1330207: RNCC: 3 | RNVC: 2

5 Jun 2003

5340-17-706-3693
Strap Hinge

177063693
NO PRIMARY REF 17-706-3693: RNCC: 3 | RNVC: 2
32-04-10: RNCC: 5 | RNVC: 9
32-04-10-10: RNCC: 5 | RNVC: 9

21 Jun 1963

5340-17-110-1326
Spanner Links

171101326
859.8398: RNCC: 3 | RNVC: 2

8 May 1996

5340-17-103-4905
Webbing Strap

171034905
G88039-T393-A950: RNCC: 3 | RNVC: 2
TYPE 8: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-17-122-3939
Barrel Bolt

171223939
373226: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-17-030-7993
Kolom

170307993
K115651: RNCC: 3 | RNVC: 2

17 Jun 1972

5340-17-117-1786
Butt Hinge Leaf

171171786
352233661000: RNCC: 3 | RNVC: 2
3522 336 61000: RNCC: 5 | RNVC: 2

16 Dec 2004

5340-17-045-9747
Helical Compression Spring Retainer

170459747
WW 305 868: RNCC: 3 | RNVC: 2

18 Nov 1974

5340-17-043-7781
Bracket

5340-17-047-5813
Met Sc Afstandstuk

5340-17-043-6796
Hoek Steun

5340-17-104-1656
Mending Plate

171041656
6325687: RNCC: 3 | RNVC: 2

15 Mar 1990

5340-17-032-0365
Retaining Strap

170320365
NSV2704: RNCC: 3 | RNVC: 2

17 Jun 1972

5340-17-031-6386
Connector Quick

170316386
4501-03-35-00: RNCC: 3 | RNVC: 2

4 Mar 1970

5340-17-108-2083
Leather Strap

171082083
0300515: RNCC: 3 | RNVC: 2
340116-0000: RNCC: 5 | RNVC: 9

28 Jun 1994

5340-17-118-8813
Pad Eye

171188813
672-949-0000: RNCC: 3 | RNVC: 2

28 Aug 2006

5340-17-124-1361
Angle Bracket

171241361
F1409LDW-002: RNCC: 3 | RNVC: 2

22 Dec 2011

5340-17-106-0720
Webbing Strap

171060720
06 42 120: RNCC: 3 | RNVC: 2

10 Dec 1991

5340-17-109-6201
Mounting Bracket

171096201
1481: RNCC: 3 | RNVC: 2
0840.640BLAD2-1481: RNCC: 3 | RNVC: 2

5 Dec 1995

5340-17-105-7943
Nonmetallic Solid Wheel

171057943
S15: RNCC: 3 | RNVC: 2

20 Aug 1991

5340-17-109-1914
Detent Plunger

171091914
XX005-6395: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-17-105-9730
Dust And Moisture Seal Protective Cap-Plug

171059730
0040060: RNCC: 3 | RNVC: 2
04-1: RNCC: 5 | RNVC: 9

5 Nov 1991

5340-17-105-7618
Catch Strike

171057618
352232082260: RNCC: 3 | RNVC: 2

30 Jul 1991

5340-17-103-5336
Steun

171035336
FFVAOE-340519: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-17-121-2262
Helm Rail

171212262
BT-211281: RNCC: 3 | RNVC: 2

16 Apr 2008

5340-17-053-7344
Borgstrip

170537344
854.4077: RNCC: 3 | RNVC: 2

5 Feb 1986

5340-17-055-5441
Trekstang

170555441
46-3-822: RNCC: 3 | RNVC: 2

20 Oct 1984

5340-17-112-7906
Escutcheon Plate

171127906
GSV6645Z-72MMCHR: RNCC: 3 | RNVC: 2
730214: RNCC: 3 | RNVC: 2

24 Sep 1999

5340-17-107-3432
Butt Hinge

171073432
08 04 118: RNCC: 3 | RNVC: 2

22 Jun 1993

5340-17-106-1524
Access Cover

171061524
3-06014-22: RNCC: 3 | RNVC: 2

28 Jan 1992

5340-17-109-8441
Linksach Schuifstuk

171098441
503.01.01.00-0: RNCC: 3 | RNVC: 2

20 Feb 1996

5340-17-004-7535
Detent Plunger

170047535
6132092: RNCC: 3 | RNVC: 2

17 Jun 1972

5340-17-706-3161
Key Blank

177063161
NO PRIMARY REF 17-706-3161: RNCC: 3 | RNVC: 2
136K9-23-5X16-5X4-5: RNCC: 6 | RNVC: 9
136K9STIFT6-5: RNCC: 6 | RNVC: 9

1 Apr 1970

5340-17-706-3525
Expansion Shield

177063525
NO PRIMARY REF 17-706-3525: RNCC: 3 | RNVC: 2
8X1-1-2PLUG: RNCC: 5 | RNVC: 9
8X1 1-2PLUG: RNCC: 5 | RNVC: 9

15 Jan 1963

5340-17-105-8990
Swivel Caster

171058990
197009U: RNCC: 3 | RNVC: 2

25 Sep 1991

5340-17-117-5598
Loop Clamp

171175598
8680-023-003: RNCC: 3 | RNVC: 2
8680-023-003: RNCC: 5 | RNVC: 2

31 Mar 2005

5340-17-052-5420
Grondplaat

170525420
04-06-50-17: RNCC: 3 | RNVC: 2

14 Apr 1982

5340-17-041-1789
Access Door Hinge

170411789
1150-10-19-334-01-1: RNCC: 3 | RNVC: 2
A10-19-334-01-1: RNCC: 3 | RNVC: 2
A1019-334-01-1: RNCC: 3 | RNVC: 2
A10-19-334-01-1: RNCC: 5 | RNVC: 2
A10-19-334-01-1: RNCC: 5 | RNVC: 2

24 Jun 1974

5340-17-121-8222
Retaining Band

171218222
LOS 150518290500 ZWART 4,5M: RNCC: 3 | RNVC: 2

24 Dec 2008

5340-17-706-3428
Eye Hook

177063428
54-100: RNCC: 3 | RNVC: 2
35-00-00-100: RNCC: 5 | RNVC: 9

17 Dec 1962

5340-17-121-9683
Klem

171219683
BRS-A 15-18: RNCC: 3 | RNVC: 2

2 Mar 2009

5340-17-118-7978
Bracket

171187978
EBR112A269: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-17-108-3661
Angle Bracket

171083661
352246240200: RNCC: 3 | RNVC: 2
3522 462 40200: RNCC: 5 | RNVC: 2

7 Sep 1994

5340-17-103-0871
Spacing Threaded Standoff

171030871
2601R230: RNCC: 3 | RNVC: 2

2 May 1989

5340-17-121-5251
Dust And Moisture Seal Protective Cap

171215251
31640 D-140,7: RNCC: 3 | RNVC: 2
2 0026-326: RNCC: 5 | RNVC: 2

19 Aug 2008

5340-17-117-0754
Mounting Bracket

171170754
352232506930: RNCC: 3 | RNVC: 2
3522 325 06930: RNCC: 5 | RNVC: 2

24 Nov 2004

5340-17-054-2733
Mounting Plate

170542733
79008: RNCC: 3 | RNVC: 2

5 Apr 1983

5340-17-053-6147
Prop

170536147
352235110480: RNCC: 3 | RNVC: 2
VSV77B45: RNCC: 3 | RNVC: 2

25 Feb 1985

5340-17-114-8212
Mounting Plate

171148212
352233354740: RNCC: 3 | RNVC: 2

1 May 2002

5340-17-120-2278
Kettingspanner

171202278
81455 AMF: RNCC: 3 | RNVC: 2

14 Mar 2007

5340-17-118-0005
Loop Clamp

171180005
836124004: RNCC: 3 | RNVC: 2
836124004: RNCC: 5 | RNVC: 2

27 Aug 2004

5340-17-120-2048
Flens

171202048
A10242: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-17-102-8756
Nut And Bolt Locking Plate

171028756
9205R387: RNCC: 3 | RNVC: 2

14 Feb 1989

5340-17-107-9925
Mounting Plate

171079925
0597489: RNCC: 3 | RNVC: 2

30 Mar 1994

5340-17-114-1466
Angle Bracket

171141466
352232405030: RNCC: 3 | RNVC: 2
3522 324 05030: RNCC: 5 | RNVC: 2

9 Jul 2001

5340-17-027-7148
Synchro Clamp

170277148
NO PRIMARY REF 17-027-7148: RNCC: 3 | RNVC: 2
5286-4: RNCC: 6 | RNVC: 9

17 Jun 1972

5340-17-107-2361
Bridge Clamp

171072361
352233096680: RNCC: 3 | RNVC: 2

4 May 1993

5340-17-124-1750
Mounting Bracket

171241750
18-9234328-P: RNCC: 3 | RNVC: 2
9234328-P: RNCC: 5 | RNVC: 2

25 Jan 2012

5340-17-114-2599
Angle Bracket

171142599
352232458390: RNCC: 3 | RNVC: 2

27 Aug 2001

5340-17-103-9092
Lantaarnstuk

171039092
79.131.1-05LEG1: RNCC: 3 | RNVC: 2

17 Jan 1990

5340-17-105-2319
Flush Lock

171052319
KB506.442-1J10.11-12-110/9-2SL: RNCC: 3 | RNVC: 2

7 Feb 1991

5340-17-706-3284
Flush Bolt

177063284
NO PRIMARY REF 17-706-3284: RNCC: 3 | RNVC: 2
1343-60: RNCC: 5 | RNVC: 9

24 Oct 1963

5340-17-051-0759
Flens

170510759
X10878-003: RNCC: 3 | RNVC: 2

12 Nov 1979

5340-17-105-0024
Spacing Threaded Standoff

171050024
352232094200: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-17-105-6159
Spacing Threaded Standoff

171056159
352232332080: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-17-052-0164
Extension Drawer Slide Section

170520164
392240100961: RNCC: 3 | RNVC: 2
482246230156: RNCC: 5 | RNVC: 1
532246230156: RNCC: 5 | RNVC: 1

6 Feb 1980

5340-17-120-5809
Deuranker

171205809
226.000 DEURANKER: RNCC: 3 | RNVC: 2

3 Jul 2007

5340-17-104-5299
Rod End Clevis

171045299
6340668: RNCC: 3 | RNVC: 2
8958011412: RNCC: 5 | RNVC: 2

14 Aug 1990

5340-17-124-0918
Mounting Plate

171240918
2 0169-688: RNCC: 3 | RNVC: 2

1 Dec 2011

5340-17-051-8276
Spring Tension Clip

170518276
172.81.19.25: RNCC: 3 | RNVC: 2
4738-25: RNCC: 5 | RNVC: 2

21 May 1981

5340-17-114-9699
Mounting Plate

171149699
EBR31D4: RNCC: 3 | RNVC: 2

17 Jun 2002

5340-17-107-2834
Butt Hinge

171072834
0844337: RNCC: 3 | RNVC: 2

25 May 1993

5340-17-116-2028
Dop

171162028
3302001: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-17-111-4663
Snap Hook

171114663
DMM, AL MET TWISTLOCK SLUITING: RNCC: 3 | RNVC: 2

20 Jan 1998

5340-17-056-1900
Padlock Set

170561900
S4005-M862 38STUKS 5069B: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-17-054-5854
Spiege Montageplaat

170545854
23944-18: RNCC: 3 | RNVC: 2

7 Sep 1983

5340-17-114-7702
Snap Hook

171147702
7705-0002: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-17-027-1535
Aandruk Beugel

170271535
K101772: RNCC: 3 | RNVC: 2

17 Jun 1972

5340-17-118-2429
Catch Strike

171182429
2 0082-437: RNCC: 3 | RNVC: 2

19 Jan 2006

5340-17-123-1052
Geleiderol

171231052
809-124540: RNCC: 3 | RNVC: 2

23 Jun 2010

5340-17-107-1920
Ana Verbindingsbrug

171071920
3.80.229: RNCC: 3 | RNVC: 2

20 Apr 1993

5340-17-055-1913
Padlock Set

170551913
2-4013-2GSLGEMERKTF812 BH18MM: RNCC: 3 | RNVC: 2

17 May 1984

5340-17-111-8241
Buis Klemsamenstel

171118241
0400210: RNCC: 3 | RNVC: 2
LMB102: RNCC: 5 | RNVC: 2

28 Apr 1998

5340-17-056-5648
Strap Fastener Loop

170565648
902600: RNCC: 3 | RNVC: 2

6 Jun 1995

5340-17-122-3681
Webbing Strap

171223681
ARK9184Y: RNCC: 3 | RNVC: 2

23 Jul 2009

5340-17-110-4765
Access Cover

171104765
352246228800: RNCC: 3 | RNVC: 2

2 Oct 1996

5340-17-107-6314
Access Cover

171076314
050423M138: RNCC: 3 | RNVC: 2

9 Nov 1993

5340-17-050-6310
Deurkruk Rozetsamen

170506310
GSV5459SGSV5193-2: RNCC: 3 | RNVC: 2

20 Mar 1979

5340-17-114-5934
Angle Bracket

171145934
352232164660: RNCC: 3 | RNVC: 2

1 Feb 2002

5340-17-107-2368
Double Angle Bracket

171072368
352233097330: RNCC: 3 | RNVC: 2

4 May 1993

5340-17-110-5006
Mounting Bracket

171105006
50140030: RNCC: 3 | RNVC: 2
5014003001: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-17-121-0120
Bevestigingsmiddel

171210120
609-990-1470: RNCC: 3 | RNVC: 2

17 Jan 2008

5340-17-054-1041
Helical Compression Spring Retainer

170541041
HR-2121-002: RNCC: 3 | RNVC: 2
HR-2121-2: RNCC: 5 | RNVC: 2
HR-2121-2: RNCC: 5 | RNVC: 2

25 Feb 1983

5340-17-122-5312
Mounting Bracket

171225312
W005053056: RNCC: 3 | RNVC: 2

7 Oct 2009

5340-17-039-1472
Stang

170391472
06-01-30-383: RNCC: 3 | RNVC: 2

2 Dec 1971

5340-17-051-8074
Haak Staartvouw Lok

170518074
04-06-50-06: RNCC: 3 | RNVC: 2

7 May 1981

5340-17-053-6228
Schyf

170536228
352231104800: RNCC: 3 | RNVC: 2
VRI62A27: RNCC: 5 | RNVC: 2

26 Feb 1985

5340-17-055-3424
Webbing Strap

170553424
B20.02BL26-1LEG2: RNCC: 3 | RNVC: 2

12 Jul 1984

5340-17-113-2844
Mounting Bracket

171132844
MAR-322-DN200-LEG2: RNCC: 3 | RNVC: 2

4 May 2000

5340-17-120-1228
Gereedschapsklem

171201228
698-290-1310: RNCC: 3 | RNVC: 2

8 Feb 2007

5340-17-117-2913
Roller Holder

171172913
02-21-34-00: RNCC: 3 | RNVC: 2

6 Jan 2005

5340-17-116-3516
Mounting Bracket

171163516
352232460700: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-17-116-0825
Manual Control Lever

171160825
NO PRIMARY REF 17-116-0825: RNCC: 3 | RNVC: 2
Y10924900: RNCC: 5 | RNVC: 2
0428: RNCC: 5 | RNVC: 9

16 Oct 2003

5340-17-710-1505
Escutcheon Plate

177101505
BS4820-004: RNCC: 3 | RNVC: 2
2510-3758-00: RNCC: 6 | RNVC: 9

17 Jun 1972

5340-17-056-2186
Clamping Catch

170562186
U2-57-3B: RNCC: 2 | RNVC: 2
10340455: RNCC: 3 | RNVC: 2

24 Aug 1988

5340-17-120-2334
Profiel

171202334
INEXA TNF 445: RNCC: 3 | RNVC: 2

16 Mar 2007

5340-17-116-6397
Angle Bracket

171166397
S538F1705207: RNCC: 3 | RNVC: 2

5 May 2004

5340-17-124-6667
Filler Opening Cap

171246667
TESTING CAP 1200: RNCC: 3 | RNVC: 2

13 Dec 2012

5340-17-101-3684
C-Profiel

171013684
X12638-401: RNCC: 3 | RNVC: 2

28 Apr 1987

5340-17-120-0925
Elastisch Spin

171200925
ER-200: RNCC: 3 | RNVC: 2

31 Jan 2007

5340-17-102-3668
Webbing Strap

171023668
01802-2+2X01414L1200MM: RNCC: 3 | RNVC: 2

15 Jun 1988

5340-17-111-8908
Turnbuckle

171118908
GP508-1: RNCC: 3 | RNVC: 2

25 May 1998

5340-17-056-5948
Clamp

170565948
FON2-7331B10: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-105-6013
Handvat

171056013
100.443.042: RNCC: 3 | RNVC: 2

5 Jun 1991

5340-17-110-6364
Handwheel

171106364
2431X-DN50-HANDWHEEL: RNCC: 3 | RNVC: 2

18 Dec 1996

5340-17-053-7463
Pawl Fastener

170537463
261: RNCC: 3 | RNVC: 2
NR261: RNCC: 5 | RNVC: 2

29 Apr 1986

5340-17-116-1444
Mounting Plate

171161444
698-200-2260: RNCC: 3 | RNVC: 2

24 Jul 2000

5340-17-706-3650
Butt Hinge

177063650
NO PRIMARY REF 17-706-3650: RNCC: 3 | RNVC: 2

24 Apr 1963

5340-17-056-1899
Padlock Set

170561899
S4005-M861 38STUKS 03468B: RNCC: 3 | RNVC: 2

8 Jun 1988

5340-17-103-6195
Afdekking

171036195
FFVAOE-440279: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-17-047-5999
Helical Compression Spring Seat

170475999
NO PRIMARY REF 17-047-5999: RNCC: 3 | RNVC: 2
1501F929B1LEG26: RNCC: 5 | RNVC: 9
1504F123: RNCC: 5 | RNVC: 9
9604F733LEG26: RNCC: 5 | RNVC: 9

17 Dec 1975

5340-17-123-5785
Koppelstang

171235785
01-1-9127/1202 P 506: RNCC: 3 | RNVC: 2

17 Feb 2011

5340-17-108-1142
Extension Drawer Slide

171081142
101.900: RNCC: 3 | RNVC: 2

25 May 1994

5340-17-107-9981
Pipe Hanger

171079981
0623938: RNCC: 3 | RNVC: 2

30 Mar 1994

5340-17-107-7193
Key Blank

171077193
SV110KB516.869 PROFIEL 6: RNCC: 3 | RNVC: 2

14 Dec 1993

5340-17-116-4857
Mechanical Stop

171164857
2800-2715-00NSCM01413: RNCC: 3 | RNVC: 2
2800-2715-00: RNCC: 5 | RNVC: 2

18 Mar 2004

5340-17-109-9864
Bumper

171099864
8411/3299: RNCC: 3 | RNVC: 2

28 Mar 1996

5340-17-117-0944
Angle Bracket

171170944
352232071910: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-17-116-7826
Mounting Plate

171167826
3522 336 33680: RNCC: 3 | RNVC: 2
352233633680: RNCC: 5 | RNVC: 2

24 Jun 2004

5340-17-124-6585
Bow Handle

171246585
400030: RNCC: 3 | RNVC: 2

5 Dec 2012

5340-17-050-4270
Spacing Threaded Standoff

170504270
352232089430: RNCC: 3 | RNVC: 2

7 Nov 1978

5340-17-103-5771
Plaat Metaal

171035771
FFVAOE-440106: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-17-104-6426
Webbing Strap

171046426
6853 359-006: RNCC: 3 | RNVC: 2

12 Sep 1990

5340-17-112-8122
Access Cover

171128122
HCE12-2P-AANSLUITKAP: RNCC: 3 | RNVC: 2

1 Oct 1999

5340-17-050-0666
Sto Bescherm- Kap

5340-17-114-8205
Mounting Plate

171148205
352233330500: RNCC: 3 | RNVC: 2

1 May 2002

5340-17-105-6623
Mounting Plate

171056623
352232603870: RNCC: 3 | RNVC: 2

25 Jun 1991

5340-17-105-6538
Extension Drawer Slide Section

171056538
352232451640: RNCC: 3 | RNVC: 2

25 Jun 1991

5340-17-124-6085
Mounting Bracket

171246085
0589418: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-17-039-0795
Door Handle

170390795
20003A: RNCC: 3 | RNVC: 2
15-49A: RNCC: 3 | RNVC: 2

4 Mar 1972

5340-17-103-1320
Nut And Bolt Locking Plate

171031320
1620SW137: RNCC: 3 | RNVC: 2

17 May 1989

5340-17-116-2380
Expansion Shield

171162380
63611.060.040: RNCC: 3 | RNVC: 2

24 Nov 2003

5340-17-113-0434
Dust And Moisture Seal Protective Cap-Plug

171130434
6750218: RNCC: 3 | RNVC: 2
92VB17C831ADZFAB: RNCC: 5 | RNVC: 2

26 Jan 2000

5340-17-105-6179
Spacing Threaded Standoff

171056179
352233461820: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-17-115-9808
Mounting Plate

171159808
352236056830: RNCC: 3 | RNVC: 2
35223605683X: RNCC: 5 | RNVC: 2

9 Sep 2003

5340-17-003-2894
Expansion Shield

170032894
M16X110X80STNEN2316: RNCC: 2 | RNVC: 2
NEN2316: RNCC: 4 | RNVC: 1

4 Jul 1972

Load More Results