What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Leg Tip?

A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

Hardware, Commercial - Netherlands (NL)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Netherlands (NL) - NCB is 17

Page 22 of 31

NSN Format for Hardware, Commercial
Codified by Netherlands

53	40	17	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Netherlands (NL)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 37 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 102 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 40 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 44 Items
What is a Compression Cup? 18 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 30 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 104 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is a Metal Grille? 50 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 533 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 26 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 103 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 21 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 14 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 11 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Door Hook And Eye? 12 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Sliding Door Hanger? 49 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 15 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 22 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Flush Lock? 326 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 36 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 26 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 33 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 17 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 13 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 14 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Rope Cleat? 10 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 87 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 117 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 35 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 90 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 78 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 14 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Leg Tip? 17 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 25 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 80 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 216 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 96 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 88 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 47 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 30 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Support Hook? 11 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 40 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Plain Solid Disk? 76 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 676 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 18 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 74 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 310 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 67 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 216 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 77 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 53 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 11 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 10 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
Hook,Hammock 14 Items
What is a Catch Strike? 63 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 13 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Retaining Band? 45 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 98 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 10 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 43 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 222 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 30 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 22 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 521 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 81 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 35 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 12 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 73 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 179 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 28 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 59 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 18 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 40 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 95 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 46 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 42 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 10 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 13 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 412 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 13 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 13 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 11 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 100 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 12 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Seal Retaining Plate? 19 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 25 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 1072 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 16 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1177 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Synchro Clamp? 45 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 33 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 339 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 39 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is an Arched Cushion? 12 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Pipe Hanger? 78 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 20 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 16 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 46 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 13 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 45 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Sliding Block? 12 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 11 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 40 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 363 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 21 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 166 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 34 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 27 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Locking Stay? 41 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Sliding Door Hanger Section? 34 Items: A Sliding Door Hanger Section (HANGER SECTION,SLIDING DOOR) is an item specifically designed for use as a major component of a HANGER, SLIDING DOOR. It may contain ball rollers, springs, locking device(s), and mounting provisions.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Fouling Preventive Anode? 15 Items: A Fouling Preventive Anode (ANODE,FOULING PREVENTIVE) is an alloy rod which prevents any marine plants, animal and bacterial growth setting in heat exchangers, pumps, box coolers, and the like without damaging the environment. For anodes which prevent corrosion see ANODE, CORROSION PREVENTIVE.

Stock Items From Supply Class 5340 Page 22 of 31

5340-17-114-1536
Angle Bracket

171141536
352232464260: RNCC: 3 | RNVC: 2
3522 324 64260: RNCC: 5 | RNVC: 2

10 Jul 2001

5340-17-122-8277
Sliding Door Hanger Section

171228277
S521F3297206: RNCC: 3 | RNVC: 2

22 Jan 2010

5340-17-108-5044
Webbing Strap

171085044
1136.122BLAD2TYPE1B-VARI.L2840MM: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-17-056-0167
Membra Aandryfstang

170560167
92010: RNCC: 3 | RNVC: 2

23 Jul 1987

5340-17-123-5993
Electronic Equipment Hardware Kit

171235993
KIT SCAN EAGLE: RNCC: 3 | RNVC: 2

2 Mar 2011

5340-17-117-6322
Angle Bracket

171176322
352232330700: RNCC: 3 | RNVC: 2

28 Apr 2005

5340-17-100-4861
Klepsluiting

171004861
83066: RNCC: 3 | RNVC: 2

28 Jan 1986

5340-17-107-5826
Clamping Catch

171075826
20900700: RNCC: 3 | RNVC: 2
526221: RNCC: 5 | RNVC: 2

12 Oct 1993

5340-17-125-0900
Clamping Catch

171250900
352234678120: RNCC: 3 | RNVC: 2
3522 346 78120: RNCC: 5 | RNVC: 2

26 Sep 2013

5340-17-106-2811
Mending Plate

171062811
352233363150: RNCC: 3 | RNVC: 2

1 Apr 1992

5340-17-038-4908
Plate

170384908
50020910: RNCC: 3 | RNVC: 2

15 Apr 1972

5340-17-120-2253
Swivel Caster

171202253
892 343-83: RNCC: 3 | RNVC: 2

14 Mar 2007

5340-17-108-4989
Clamping Catch

171084989
OJOP 701.1: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-17-117-0877
Mounting Plate

171170877
352231512800: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-17-109-4844
Blokkering

171094844
0508849: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-114-1895
Spacing Threaded Standoff

171141895
352232339220: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-17-109-4812
Sluiting Trekstrip

171094812
115.50.07.403: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-17-121-9168
Ladegeleider

171219168
1347.325: RNCC: 3 | RNVC: 2

6 Feb 2009

5340-17-123-9642
Mounting Bracket

171239642
A30-0592-006: RNCC: 3 | RNVC: 2

4 Oct 2011

5340-17-105-1612
Mounting Bracket

171051612
6354175: RNCC: 3 | RNVC: 2

22 Jan 1991

5340-17-031-3218
Mounting Plate

170313218
034T28100: RNCC: 3 | RNVC: 2

6 Dec 1967

5340-17-049-6193
Mending Plate

170496193
WW422015A: RNCC: 3 | RNVC: 2
WW422015A: RNCC: 5 | RNVC: 2

3 Nov 1977

5340-17-049-8688
Draaistuk

170498688
03-4-7016BL25P0S13A1-13B: RNCC: 3 | RNVC: 2

31 Mar 1978

5340-17-054-6109
Kaartenbak

170546109
5340 512: RNCC: 3 | RNVC: 2
R.KB.1004: RNCC: 5 | RNVC: 9

30 Aug 1983

5340-17-111-7400
Snap Hook

171117400
BS5340-2-261-003: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-17-029-2070
Spring Tension Clip

170292070
158092: RNCC: 3 | RNVC: 2
158092: RNCC: 5 | RNVC: 9

17 Jun 1972

5340-17-032-0357
Retaining Strap

170320357
NSV2554: RNCC: 3 | RNVC: 2

17 Jun 1972

5340-17-055-2540
Plain Solid Disk

170552540
9232140800: RNCC: 3 | RNVC: 2
9232140800: RNCC: 3 | RNVC: 2

22 May 1984

5340-17-112-2714
Deksel

171122714
01581535: RNCC: 3 | RNVC: 2

10 Nov 1998

5340-17-114-7580
Butt Hinge Leaf

171147580
352238020810: RNCC: 3 | RNVC: 2

4 Apr 2002

5340-17-115-9489
Mounting Bracket

171159489
S521F3113201: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-17-105-6549
Butt Hinge Leaf

171056549
352232508600: RNCC: 3 | RNVC: 2

25 Jun 1991

5340-17-039-6003
Handwheel

170396003
HW07719D7: RNCC: 3 | RNVC: 2
HW07719: RNCC: 5 | RNVC: 9

12 Aug 1972

5340-17-114-6152
Double Angle Bracket

171146152
352232663470: RNCC: 3 | RNVC: 2

11 Feb 2002

5340-17-114-3852
Mounting Plate

171143852
352232477260: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-17-037-7083
Bumper

170377083
1005D2B8: RNCC: 3 | RNVC: 2

4 Mar 1971

5340-17-034-6884
Nut And Bolt Locking Plate

170346884
000-01-0377089: RNCC: 3 | RNVC: 2

14 Jan 1971

5340-17-124-0945
Locking Bar

171240945
GENERIC-02-83-2500-PDM-1008: RNCC: 3 | RNVC: 2

2 Dec 2011

5340-17-041-1433
Veer

170411433
FC196A3: RNCC: 3 | RNVC: 2

9 Dec 1972

5340-17-121-8378
Speciaal Schroef

171218378
G7561: RNCC: 3 | RNVC: 2

6 Jan 2009

5340-17-114-4044
Access Cover

171144044
352232446810: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-17-101-6776
Cup Rubber

171016776
5435484: RNCC: 3 | RNVC: 2

15 Sep 1987

5340-17-113-9486
Mounting Plate

171139486
166020: RNCC: 3 | RNVC: 2

11 Apr 2001

5340-17-102-4527
Laadhulpstuk

171024527
G25.20-348: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-17-109-8737
Double Angle Bracket

171098737
809.DM.16.04.00: RNCC: 3 | RNVC: 2

27 Feb 1996

5340-17-103-1058
Bovenplaat

171031058
854.6631: RNCC: 3 | RNVC: 2

9 May 1989

5340-17-113-4397
Permanent Magnet

171134397
350716: RNCC: 3 | RNVC: 2
6105164,24MM,ROOD,CLASSIC: RNCC: 5 | RNVC: 2
350671: RNCC: 5 | RNVC: 9

11 Jul 2000

5340-17-025-1890
Nut And Bolt Locking Plate

170251890
10301286: RNCC: 3 | RNVC: 1
N5-9-14X80: RNCC: 3 | RNVC: 1
N5-9-14X80X0-75: RNCC: 3 | RNVC: 2

14 Oct 1971

5340-17-025-1893
Nut And Bolt Locking Plate

170251893
N5-9-14X43: RNCC: 3 | RNVC: 2

14 Oct 1971

5340-17-102-7791
Schakelaar Stoel

171027791
2605R132: RNCC: 3 | RNVC: 2

3 Jan 1989

5340-17-116-4085
Stand And Roller Pipe Support

171164085
XX003-9296: RNCC: 3 | RNVC: 2

13 Feb 2004

5340-17-100-0283
Verbindingsbuis

171000283
82077: RNCC: 3 | RNVC: 2

1 Jan 2000

5340-17-055-0744
Loop Clamp

170550744
0175667: RNCC: 3 | RNVC: 2
175667: RNCC: 5 | RNVC: 9

9 Nov 1987

5340-17-039-6125
Handgreepsamenstel

170396125
0R40-1688CB12: RNCC: 3 | RNVC: 2
0R40-1688C: RNCC: 6 | RNVC: 9

12 Aug 1972

5340-17-114-0092
Loop Clamp

171140092
550835: RNCC: 3 | RNVC: 2

24 Apr 2001

5340-17-116-3103
Turnbuckle

171163103
TUIG-TESTBOEK-ZUIDERKRUIS-25.8.D: RNCC: 3 | RNVC: 2

6 Jan 2004

5340-17-109-5927
Dust And Moisture Seal Protective Cover

171095927
250272-192122.000.0: RNCC: 3 | RNVC: 2

28 Nov 1995

5340-17-107-3326
Mounting Plate

171073326
07 46 110: RNCC: 3 | RNVC: 2

15 Jun 1993

5340-17-114-6571
Mounting Bracket

171146571
352233109470: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-17-121-0943
Mounting Plate

171210943
150.011.519: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-17-114-6095
Mounting Plate

171146095
352232629070: RNCC: 3 | RNVC: 2

8 Feb 2002

5340-17-054-9659
Flush Lock

170549659
GSV2861GHGR11SLEUTELNR2212F812: RNCC: 3 | RNVC: 2

2 Feb 1984

5340-17-706-3387
Door Hook

177063387
GSV230G75MM: RNCC: 3 | RNVC: 2

21 Sep 1973

5340-17-055-1437
Retaining Strap

170551437
0668228: RNCC: 3 | RNVC: 2
668228: RNCC: 5 | RNVC: 9

28 Mar 1984

5340-17-104-2518
Double Angle Bracket

171042518
79.963.800: RNCC: 3 | RNVC: 2
799638: RNCC: 3 | RNVC: 2
BS402.01562: RNCC: 5 | RNVC: 2

18 Apr 1990

5340-17-604-4010
Spring Tension Clip

176044010
NO PRIMARY REF 17-604-4010: RNCC: 3 | RNVC: 2
1463: RNCC: 5 | RNVC: 9
1463: RNCC: 6 | RNVC: 9
547201002613: RNCC: 6 | RNVC: 9

21 Aug 1968

5340-17-115-0222
Clamping Catch

171150222
U134-183-34: RNCC: 3 | RNVC: 2

2 Jul 2002

5340-17-111-2253
Mounting Plate

171112253
NO PRIMARY REF 17-111-2253: RNCC: 3 | RNVC: 2
VG4510008: RNCC: 5 | RNVC: 9

3 Oct 1997

5340-17-119-0302
Bumper

171190302
GMT TYPE D ITEM 14: RNCC: 3 | RNVC: 2

19 Oct 2006

5340-17-114-6496
Clamping Catch

171146496
352233085230: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-17-114-6488
Angle Bracket

171146488
352233082570: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-17-049-8864
Deur Gaffelplaat

170498864
03-4-7015BL82P0S91: RNCC: 3 | RNVC: 2

12 Apr 1978

5340-17-124-9514
Angle Bracket

171249514
8006.7576: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-17-101-2201
Tussenstuk Geleidin

171012201
1433.323BLAD1LEG1-16T/M22: RNCC: 3 | RNVC: 2

28 Jan 1987

5340-17-111-3918
Veiligheid Haak

171113918
MODEL 5-1/POS. 1 T/M 12: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-17-105-7015
Mounting Bracket

171057015
830.21-219: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-17-120-9506
Seal Retaining Plate

171209506
9423045: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-17-056-1902
Padlock Set

170561902
S4005-M864 38STUKS 1108DE: RNCC: 3 | RNVC: 2

8 Jun 1988

5340-17-123-3180
Mounting Bracket

171233180
10-CA-002-401: RNCC: 3 | RNVC: 2

28 Sep 2010

5340-17-056-6234
Plate

170566234
F7960-060-007: RNCC: 3 | RNVC: 2

21 Nov 1995

5340-17-121-1922
Haak

171211922
CABLESAFE TYPE 6 INCH MAX 40KG: RNCC: 3 | RNVC: 2

27 Mar 2008

5340-17-109-8693
Mounting Bracket

171098693
0632605: RNCC: 3 | RNVC: 2
6.41.063: RNCC: 5 | RNVC: 9
6.41.063.07: RNCC: 5 | RNVC: 9

27 Feb 1996

5340-17-112-7649
Mounting Bracket

171127649
F5106-089-009: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-17-120-7699
Angle Bracket

171207699
16L384: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-17-049-4335
Butt Hinge

170494335
0819609: RNCC: 3 | RNVC: 2
819609: RNCC: 5 | RNVC: 9

14 Jun 1977

5340-17-024-0030
Buckle

170240030
10233: RNCC: 3 | RNVC: 2
10233: RNCC: 5 | RNVC: 9

21 Aug 1968

5340-17-116-3353
Mounting Bracket

171163353
S553F1246211: RNCC: 3 | RNVC: 2

16 Jan 2004

5340-17-109-5303
Nonmetallic Solid Wheel

171095303
94-294-00LEG23: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-050-9261
Afdekplaat

170509261
352232091310: RNCC: 3 | RNVC: 2

5 Sep 1979

5340-17-124-5375
Key Blank

171245375
32322 PROF 1319: RNCC: 3 | RNVC: 2

15 Oct 2012

5340-17-121-1688
Manual Control Handle

171211688
356.190.019: RNCC: 3 | RNVC: 2

14 Mar 2008

5340-17-105-8544
Bescherm Freesb Kap

171058544
NO PRIMARY REF 17-105-8544: RNCC: 3 | RNVC: 2
FB640: RNCC: 5 | RNVC: 9

19 Sep 1991

5340-17-054-9649
Flush Lock

170549649
GSV2713GHGR5SLEUTELNR1511F812: RNCC: 3 | RNVC: 2

2 Feb 1984

5340-17-112-1110
Flush Lock

171121110
R30932-SAN-7030-5SL-SERIE2: RNCC: 3 | RNVC: 2

29 Sep 1998

5340-17-113-9471
Mounting Plate

171139471
161776: RNCC: 3 | RNVC: 2

11 Apr 2001

5340-17-102-6577
Bumper

171026577
NBL3076MERK3: RNCC: 3 | RNVC: 2

9 Nov 1988

5340-17-107-9299
Angle Bracket

171079299
0292205: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-17-053-6138
Draadbus

170536138
VBW6C8: RNCC: 3 | RNVC: 2
35231035920: RNCC: 5 | RNVC: 2

25 Feb 1985

5340-17-125-1393
Spacing Threaded Standoff

171251393
0351-0016: RNCC: 3 | RNVC: 2

18 Oct 2013

5340-17-116-1445
Mounting Bracket

171161445
691-100-0310: RNCC: 3 | RNVC: 2

24 Jul 2000

5340-17-025-2105
Nut And Bolt Locking Plate

170252105
0210501: RNCC: 3 | RNVC: 2
210501: RNCC: 5 | RNVC: 9

12 Jun 1974

5340-17-117-1483
Double Angle Bracket

171171483
352233660710: RNCC: 3 | RNVC: 2
3522 336 60710: RNCC: 5 | RNVC: 2

10 Dec 2004

5340-17-105-5867
Bail Handle

171055867
352242241900: RNCC: 3 | RNVC: 2

5 Jun 1991

5340-17-118-0938
Locking Stay

171180938
102998: RNCC: 3 | RNVC: 2

17 Nov 2005

5340-17-113-9526
Angle Bracket

171139526
169592: RNCC: 3 | RNVC: 2

12 Apr 2001

5340-17-123-9172
Ketelbekleding Haak

171239172
KOPEREN KETELHAAK NR 30: RNCC: 3 | RNVC: 2

1 Sep 2011

5340-17-114-7690
Access Door Hinge

171147690
F00129741: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-17-101-8256
Metal Grille

171018256
6001-0630-001: RNCC: 3 | RNVC: 2

11 Nov 1987

5340-17-103-8721
Mending Plate

171038721
X12854-001: RNCC: 3 | RNVC: 2

19 Dec 1989

5340-17-110-1609
Deksel

171101609
XX008-3145: RNCC: 3 | RNVC: 2

15 May 1996

5340-17-121-8168
Strap Hinge

171218168
884.005.360.000: RNCC: 3 | RNVC: 2

22 Dec 2008

5340-17-103-1183
Double Angle Bracket

171031183
161292: RNCC: 3 | RNVC: 2

17 May 1989

5340-17-109-7902
Flush Lock

171097902
20971-777-7030-2SL-SERIE19VL1010: RNCC: 3 | RNVC: 2

30 Jan 1996

5340-17-106-3827
Flush Lock

171063827
KB514.049-1H40.12-62-115/9-10SL: RNCC: 3 | RNVC: 2

22 Apr 1992

5340-17-111-3280
Padlock

171113280
SL5340-2-135-456: RNCC: 3 | RNVC: 2

24 Nov 1997

5340-17-124-7348
Access Cover

171247348
2 0139-047: RNCC: 3 | RNVC: 2

29 Jan 2013

5340-17-107-3112
Padlock Set

171073112
215-11SL-BH31MM-13X-F833: RNCC: 3 | RNVC: 2

8 Jun 1993

5340-17-115-9511
Nonmetallic Solid Wheel

171159511
S521F3237201: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-17-051-4230
Frictieplaat

170514230
144L02300: RNCC: 3 | RNVC: 2

11 Jul 1980

5340-17-049-6781
Bow Handle

170496781
352242232000: RNCC: 3 | RNVC: 2

6 Dec 1977

5340-17-106-0360
Geleiderol

171060360
68116-1423-A88: RNCC: 3 | RNVC: 2

26 Nov 1991

5340-17-055-6200
Spring Tension Clip

170556200
TYPEB-38MM: RNCC: 3 | RNVC: 2

1 Dec 1984

5340-17-632-0130
Spanningssc Sleutel

176320130
NO PRIMARY REF 17-632-0130: RNCC: 3 | RNVC: 2
502910904: RNCC: 5 | RNVC: 9

18 Jun 1974

5340-17-605-2244
Antivibration Mount

176052244
NO PRIMARY REF 17-605-2244: RNCC: 3 | RNVC: 2
2BA00: RNCC: 6 | RNVC: 9
2BA00DRGNRW1255-1TEM111: RNCC: 6 | RNVC: 9
APF32-209600: RNCC: 6 | RNVC: 9

4 Feb 1968

5340-17-123-8380
Plate

171238380
16C0129-7: RNCC: 3 | RNVC: 2

28 Jul 2011

5340-17-121-6139
Valv Attachment Set

171216139
2 0135-968: RNCC: 3 | RNVC: 2

30 Sep 2008

5340-17-706-3618
Hinged Hasp

177063618
NO PRIMARY REF 17-706-3618: RNCC: 3 | RNVC: 2
37-04-09-120: RNCC: 5 | RNVC: 9

15 Jan 1963

5340-17-121-0119
Bumper

171210119
651-911-0010: RNCC: 3 | RNVC: 2
10329634: RNCC: 6 | RNVC: 9

17 Jan 2008

5340-17-114-7452
Lock-Release Lever

171147452
DLH5000-00-64: RNCC: 3 | RNVC: 2
612795: RNCC: 5 | RNVC: 2

28 Mar 2002

5340-17-120-3969
Padlock Set

171203969
2 0106-083: RNCC: 3 | RNVC: 2

20 Apr 2007

5340-17-105-9360
Mounting Plate

171059360
3080020: RNCC: 3 | RNVC: 2

22 Oct 1991

5340-17-101-2103
Handel

171012103
1434.323BLAD39: RNCC: 3 | RNVC: 2

20 Jan 1987

5340-17-117-1829
Angle Bracket

171171829
352233661950: RNCC: 3 | RNVC: 2
3522 336 61950: RNCC: 5 | RNVC: 2

16 Dec 2004

5340-17-120-4818
Mounting Bracket

171204818
1107-078-007: RNCC: 3 | RNVC: 2

30 May 2007

5340-17-103-6214
Bail Handle

171036214
FFVAOE-440392: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-17-112-1439
Key Blank

171121439
R30932-PROFIEL2468: RNCC: 3 | RNVC: 2

14 Oct 1998

5340-17-118-2676
Threaded Rod End

171182676
S003907: RNCC: 3 | RNVC: 2

25 Jan 2006

5340-17-103-3399
Bow Handle

171033399
NX33905: RNCC: 3 | RNVC: 2

11 Jul 1989

5340-17-117-5379
Mounting Plate

171175379
665008: RNCC: 3 | RNVC: 2

22 Mar 2005

5340-17-118-4729
Handwheel

171184729
HANDWHEEL ATL25: RNCC: 3 | RNVC: 2

31 Mar 2006

5340-17-055-1204
Padlock Set

170551204
5-4013-2GSLGEMERKTF823LH: RNCC: 3 | RNVC: 2

23 Mar 1984

5340-17-055-1919
Padlock Set

170551919
10-4013-2GSLGEMERKTF813TUBBH45MM: RNCC: 3 | RNVC: 2

13 Apr 1984

5340-17-123-9910
Mounting Plate

171239910
2 0168-685: RNCC: 3 | RNVC: 2

17 Oct 2011

5340-17-115-6328
Handgreep Ruitenwis

171156328
XX006-3249: RNCC: 3 | RNVC: 2

25 Apr 2003

5340-17-122-5583
Pawl Fastener

171225583
HK9952: RNCC: 3 | RNVC: 2

14 Oct 2009

5340-17-101-2090
Turnbuckle

171012090
1436.313LEG74-17-18: RNCC: 3 | RNVC: 2

20 Jan 1987

5340-17-100-2903
Plaat

171002903
VBT7G1/3: RNCC: 3 | RNVC: 2
VBT7GR1/3: RNCC: 5 | RNVC: 2

1 Jan 2000

5340-17-056-6849
Cover

170566849
VO-3203-009: RNCC: 3 | RNVC: 2

17 Apr 1996

5340-17-121-8195
Filler Opening Cap

171218195
PN016783-04: RNCC: 3 | RNVC: 2

23 Dec 2008

5340-17-005-1242
Slot

170051242
NE69317: RNCC: 3 | RNVC: 2
4301A: RNCC: 3 | RNVC: 2

21 Aug 1968

5340-17-028-8661
Bendeldraad

170288661
111444: RNCC: 3 | RNVC: 2
DIN1367-1-5X0-5VERZINKT: RNCC: 5 | RNVC: 1

26 Jul 1966

5340-17-111-7399
Snap Hook

171117399
BS5340-2-261-007: RNCC: 3 | RNVC: 2

2 Apr 1998

5340-17-107-2773
Padlock

171072773
1152.05-22-TYPE 4-GEMERKT F832Z-: RNCC: 3 | RNVC: 1

18 May 1993

5340-17-022-2958
Bumper

170222958
1180: RNCC: 3 | RNVC: 2
H20-3LEG52: RNCC: 3 | RNVC: 2
1180: RNCC: 5 | RNVC: 9
H20-3LEG52: RNCC: 5 | RNVC: 9

21 Aug 1968

5340-17-109-8451
Geleidingswagen

171098451
1662-714-10: RNCC: 3 | RNVC: 2

20 Feb 1996

5340-17-117-1773
Mounting Plate

171171773
352233660820: RNCC: 3 | RNVC: 2
3522 336 60820: RNCC: 5 | RNVC: 2

16 Dec 2004

5340-17-114-8086
Angle Bracket

171148086
352232665350: RNCC: 3 | RNVC: 2

22 Apr 2002

5340-17-116-7666
Mounting Plate

171167666
VRI70A343: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-17-706-3188
Key Blank

177063188
21: RNCC: 3 | RNVC: 2
21: RNCC: 3 | RNVC: 2
21: RNCC: 5 | RNVC: 9
401: RNCC: 6 | RNVC: 9

4 Mar 1970

5340-17-116-5642
Helical Compression Spring Retainer

171165642
S521F3245101: RNCC: 3 | RNVC: 2

16 Apr 2004

5340-17-117-4383
Mounting Bracket

171174383
S321F3024201: RNCC: 3 | RNVC: 2

10 Feb 2005

5340-17-118-2436
Door Handle

171182436
2 0077-715: RNCC: 3 | RNVC: 2

19 Jan 2006

5340-17-107-2313
Key Blank

171072313
SV110KB506.442 PROFIEL 2: RNCC: 3 | RNVC: 2

27 Apr 1993

5340-17-114-4457
Beugel

171144457
X32044-005: RNCC: 3 | RNVC: 2

9 Nov 2001

5340-17-053-8932
Retaining Strap

170538932
660098: RNCC: 3 | RNVC: 2

13 Mar 1987

5340-17-117-8428
Key Holder

171178428
553280: RNCC: 3 | RNVC: 2

29 Jul 2005

5340-17-114-5354
Mounting Plate

171145354
352233443670: RNCC: 3 | RNVC: 2
3522 334 43670: RNCC: 5 | RNVC: 2

11 Jan 2002

5340-17-106-2148
Mounting Plate

171062148
MTV000313: RNCC: 3 | RNVC: 2

25 Feb 1992

5340-17-105-6563
Extension Drawer Slide Section

171056563
352233007400: RNCC: 3 | RNVC: 2

25 Jun 1991

5340-17-123-7052
Mounting Plate

171237052
2 0165-928: RNCC: 3 | RNVC: 2

28 Apr 2011

5340-17-104-3000
Mending Plate

171043000
X12856-007: RNCC: 3 | RNVC: 2

2 May 1990

5340-17-050-0909
Geleidebus

170500909
A205876-48248: RNCC: 3 | RNVC: 2

15 Sep 1977

5340-17-053-4381
Angle Bracket

170534381
4562-411: RNCC: 3 | RNVC: 2
5-614-0214: RNCC: 5 | RNVC: 2

12 Jan 1984

5340-17-109-5100
Dust And Moisture Seal Protective Cover

171095100
250272-191000.003.0: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-121-8884
Bracket

171218884
CH1001LCW-405: RNCC: 3 | RNVC: 2

26 Jan 2009

5340-17-706-3671
Butt Hinge

177063671
NO PRIMARY REF 17-706-3671: RNCC: 3 | RNVC: 2

31 May 1963

5340-17-109-7273
Dust And Moisture Seal Protective Cap

171097273
5861: RNCC: 3 | RNVC: 2

16 Jan 1996

5340-17-123-8957
Double Angle Bracket

171238957
8402-416: RNCC: 3 | RNVC: 2

25 Aug 2011

5340-17-109-5141
Pipe Hanger

171095141
0840.603BLAD2-1518: RNCC: 3 | RNVC: 2
1518: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-116-1335
Mortise Bolt

171161335
698-200-3610: RNCC: 3 | RNVC: 2

21 Jul 2000

5340-17-054-4248
Bumper

170544248
6E37-28: RNCC: 3 | RNVC: 2
512502: RNCC: 3 | RNVC: 2

6 Jul 1983

5340-17-121-0466
Hendel

171210466
C/D85 - BUISHENDEL (0108788): RNCC: 3 | RNVC: 2

30 Jan 2008

5340-17-050-3993
Bumper

170503993
0597800: RNCC: 3 | RNVC: 2
597800: RNCC: 5 | RNVC: 9

12 Oct 1978

5340-17-114-1562
Dust And Moisture Seal Protective Plug

171141562
352232562150: RNCC: 3 | RNVC: 2
3522 325 62150: RNCC: 5 | RNVC: 2

10 Jul 2001

5340-17-114-7867
Access Cover

171147867
352243170400: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-17-114-5663
Mounting Bracket

171145663
352233449600: RNCC: 3 | RNVC: 2
3522 334 49600: RNCC: 5 | RNVC: 2

24 Jan 2002

5340-17-052-3859
Butt Hinge Leaf

170523859
X12223-013: RNCC: 3 | RNVC: 2

29 Jan 1982

5340-17-706-3587
Hinged Hasp

177063587
NO PRIMARY REF 17-706-3587: RNCC: 3 | RNVC: 2
SCHWEPPER3408-80: RNCC: 5 | RNVC: 9

15 Jan 1963

5340-17-106-0504
Draagbeugel

171060504
G88039-T 394-A750P12: RNCC: 3 | RNVC: 2

3 Dec 1991

5340-17-114-0419
Webbing Strap

171140419
F101054/31: RNCC: 3 | RNVC: 2

17 May 2001

5340-17-056-5955
Clamp

170565955
FON4-5046-200: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-114-4277
Access Cover

171144277
352232611040: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-17-111-0075
Manual Control Handle

171110075
33-00-00-28: RNCC: 3 | RNVC: 2
6902201: RNCC: 3 | RNVC: 2
33000281: RNCC: 5 | RNVC: 9

8 Jul 1997

5340-17-105-9853
Padlock Set

171059853
KB511.723-5J10.10-31-215-3SL: RNCC: 3 | RNVC: 2

5 Nov 1991

5340-17-100-8390
Bow Handle

171008390
NX53690: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-17-112-1148
Padlock Set

171121148
R30932-5F02-7070-2SL-SERIE7: RNCC: 3 | RNVC: 2

29 Sep 1998

5340-17-050-3303
Door Closer

170503303
10613-1-2R10: RNCC: 3 | RNVC: 2
KRONENBERGDL1L60-20-2: RNCC: 5 | RNVC: 9

22 Aug 1978

5340-17-123-9274
Fouling Preventive Anode

171239274
CU-70/750D2: RNCC: 3 | RNVC: 2

7 Sep 2011

5340-17-123-4230
Bevestigingsplaat

171234230
GEF-CV90-006: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-17-114-8462
Webbing Strap

171148462
NO PRIMARY REF 17-114-8462: RNCC: 3 | RNVC: 2
08.0034: RNCC: 5 | RNVC: 9

8 May 2002

5340-17-706-3672
Butt Hinge

177063672
NO PRIMARY REF 17-706-3672: RNCC: 3 | RNVC: 2
32-23-75: RNCC: 5 | RNVC: 9

31 May 1963

5340-17-050-9922
Webbing Strap

170509922
X12065-405: RNCC: 3 | RNVC: 2

22 Oct 1979

5340-17-124-6618
Rails

171246618
0066075: RNCC: 3 | RNVC: 2

6 Dec 2012

5340-17-121-3532
Mounting Plate

171213532
8001.3440: RNCC: 3 | RNVC: 2
2 0118-785: RNCC: 5 | RNVC: 2

20 Jun 2008

5340-17-124-2855
Access Cover

171242855
2 0106-419: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-17-706-3308
Buckle

177063308
DIN5291-20MSVNIK: RNCC: 2 | RNVC: 2
BLADAX73755BEZXX3973-20MSVNIK: RNCC: 3 | RNVC: 2
BLADAX73755BEZXX3973-20MSVNIK: RNCC: 6 | RNVC: 9

12 Nov 1973

5340-17-105-0899
Spacing Threaded Standoff

171050899
352232706680: RNCC: 3 | RNVC: 2

10 Jan 1991

5340-17-706-3698
Bevestiging Oog

177063698
15-49: RNCC: 3 | RNVC: 1

22 May 1964

5340-17-706-3546
Vloerp Snelsluiting

177063546
NO PRIMARY REF 17-706-3546: RNCC: 3 | RNVC: 2
AJ7-60GA7-475: RNCC: 5 | RNVC: 9
AJ7-60: RNCC: 5 | RNVC: 9

6 Aug 1973

5340-17-104-1254
Borgdeksel

171041254
5142428: RNCC: 3 | RNVC: 2

6 Mar 1990

5340-17-121-3715
Mounting Plate

171213715
165617: RNCC: 3 | RNVC: 2

30 Jun 2008

5340-17-034-0899
Schroefvo Druk Veer

170340899
0242006: RNCC: 3 | RNVC: 2
242006: RNCC: 5 | RNVC: 9

23 Sep 1969

5340-17-047-7912
Padlock

170477912
S4004-2AGHL9036A831: RNCC: 3 | RNVC: 2

5 Feb 1976

5340-17-103-6190
Arm Dekselsteun

171036190
FFVAOE-440234: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-17-118-0315
Snap Hook

171180315
SET, VOORKLIM 5 STKS: RNCC: 3 | RNVC: 2

31 Oct 2005

5340-17-110-9368
Dust And Moisture Seal Protective Cap-Plug

171109368
06-1-4WHITE: RNCC: 3 | RNVC: 2
0060104WHITE: RNCC: 5 | RNVC: 2
FON7-415W614: RNCC: 5 | RNVC: 2

3 Jun 1997

5340-17-120-6812
Opglijblok

171206812
606-100-3370: RNCC: 3 | RNVC: 2

22 Aug 2007

5340-17-123-4237
Bevestigingsplaat

171234237
GEF-2010.26: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-17-109-9074
Kabelhouder

171099074
10U/63MM + SPECIAL CARRIERS: RNCC: 3 | RNVC: 2
5810.2101 + 5800.7019: RNCC: 3 | RNVC: 2

6 Mar 1996

5340-17-120-1218
Cushioning Pad

171201218
5-B 120X120X62 PE: RNCC: 3 | RNVC: 2

8 Feb 2007

5340-17-123-3692
Sliding Door Track

171233692
S533F3307101: RNCC: 3 | RNVC: 2

20 Oct 2010

5340-17-117-6574
Webbing Strap

171176574
13790804: RNCC: 3 | RNVC: 2
IG-003: RNCC: 5 | RNVC: 1
ZR.13790804: RNCC: 5 | RNVC: 2

9 May 2005

5340-17-051-2720
Padlock Set

170512720
9-4013-2GSLGEMERKTF823TD-FD: RNCC: 3 | RNVC: 2

27 Nov 1990

5340-17-102-2183
Bail Handle

171022183
168G12500: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-17-051-1956
Coat And Hat Hook

170511956
GSV2572-138X118: RNCC: 3 | RNVC: 2

13 Feb 1980

5340-17-108-0706
Dust And Moisture Seal Protective Cap

171080706
83027-320: RNCC: 3 | RNVC: 2

3 May 1994

5340-17-108-0488
Flush Bolt

171080488
3110-269: RNCC: 3 | RNVC: 2

26 Apr 1994

5340-17-052-9053
Trillingsisolator

5340-17-036-5747
Spanschroef

5340-17-109-7919
Flush Lock

171097919
20971-226-7030-2SL: RNCC: 3 | RNVC: 2

30 Jan 1996

5340-17-103-4466
Dust And Moisture Seal Protective Cap

171034466
FFVAOE-240095: RNCC: 3 | RNVC: 2

1 Aug 1989

5340-17-117-5961
Swivel Caster

171175961
LE-VE125R-FI: RNCC: 3 | RNVC: 2

15 Apr 2005

5340-17-052-1886
Haak

170521886
12312HAAK-KMA: RNCC: 3 | RNVC: 2

22 Sep 1981

5340-17-120-5087
Sash Pole

171205087
375816+375820: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-17-055-1915
Padlock

170551915
4013-2GEMERKTF812 BH18MM: RNCC: 3 | RNVC: 2

13 Apr 1984

5340-17-104-1209
Handvat

171041209
N8-10-2: RNCC: 3 | RNVC: 2
1150626: RNCC: 3 | RNVC: 2

6 Mar 1990

5340-17-052-9993
Scharnierblok

170529993
MH.1002-08: RNCC: 3 | RNVC: 2

24 Nov 1982

5340-17-109-4064
Loop Clamp

171094064
946.31.01.111: RNCC: 3 | RNVC: 2
N311-3/4": RNCC: 5 | RNVC: 2

31 Oct 1995

5340-17-103-8686
Access Cover

171038686
X12684-029: RNCC: 3 | RNVC: 2

19 Dec 1989

5340-17-705-3613
Retaining Strap

177053613
508-069: RNCC: 3 | RNVC: 2

30 Sep 1971

5340-17-120-5530
Pipe Hanger

171205530
38466: RNCC: 3 | RNVC: 2
BRS-A8/10X4 1/2: RNCC: 5 | RNVC: 2

19 Jun 2007

5340-17-117-6376
Retaining Strap

171176376
330261: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-17-123-4701
Mounting Bracket

171234701
130105: RNCC: 3 | RNVC: 2

21 Dec 2010

5340-17-706-3299
Elbow Catch

177063299
33-07HPL: RNCC: 3 | RNVC: 2
3307HPL: RNCC: 3 | RNVC: 2

26 Jan 1964

5340-17-114-0424
Webbing Strap

171140424
F101054/52: RNCC: 3 | RNVC: 2

17 May 2001

5340-17-105-4452
Riemsamenstel

171054452
5340M 018: RNCC: 3 | RNVC: 2

3 Apr 1991

5340-17-110-9851
Pad Eye

171109851
SL5340-2-155-001: RNCC: 3 | RNVC: 2

24 Jun 1997

5340-17-054-6182
Borgpen

170546182
1348-18LEG19: RNCC: 3 | RNVC: 2

1 Sep 1983

5340-17-054-6362
Hand Crank

170546362
352242849200: RNCC: 3 | RNVC: 2

7 Sep 1983

5340-17-101-6098
Rod End Connector

171016098
660512: RNCC: 3 | RNVC: 2

4 Aug 1987

5340-17-109-8337
Clamp

171098337
A3125-1NSCM78553: RNCC: 3 | RNVC: 2
5340-00-664-3130: RNCC: 6 | RNVC: 9

13 Feb 1996

5340-17-106-1521
Mounting Plate

171061521
1-06014-10-11: RNCC: 3 | RNVC: 2

28 Jan 1992

5340-17-114-9683
Mounting Plate

171149683
EBM5A7: RNCC: 3 | RNVC: 2

17 Jun 2002

5340-17-104-8269
Spacing Threaded Standoff

171048269
352232504250: RNCC: 3 | RNVC: 2

20 Nov 1990

5340-17-100-8552
Samenst Stootbuffer

171008552
134-383C: RNCC: 3 | RNVC: 2
1435.312BLAD18: RNCC: 3 | RNVC: 2
134-383C: RNCC: 5 | RNVC: 9

18 Dec 1996

5340-17-118-4553
Bumper

171184553
57778-075,025: RNCC: 3 | RNVC: 2

28 Mar 2006

5340-17-113-9965
Access Cover

171139965
47.06.27: RNCC: 3 | RNVC: 2
7181131REP3: RNCC: 5 | RNVC: 2

18 Apr 2001

5340-17-052-6501
Bevestigingsplaat

170526501
07615-10008-P1-P4-P5: RNCC: 3 | RNVC: 2

10 Jun 1982

5340-17-120-8302
Dust And Moisture Seal Protective Plug

171208302
057 5030 620 03: RNCC: 3 | RNVC: 2

25 Oct 2007

5340-17-120-5643
Kikker

171205643
66.106.150: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-17-041-6184
Magneetvent Plunjer

170416184
NO PRIMARY REF 17-041-6184: RNCC: 3 | RNVC: 2
E5030A: RNCC: 6 | RNVC: 9

21 Oct 1972

5340-17-112-1156
Padlock Set

171121156
R30932-0252-7070-2SL-SERIE21: RNCC: 3 | RNVC: 2

29 Sep 1998

5340-17-102-8237
Flush Lock

171028237
GSV3210ZHZONDERPROFIELCIL Z KIE-: RNCC: 3 | RNVC: 1

24 Jan 1989

5340-17-118-9353
Mounting Bracket

171189353
X18120-413: RNCC: 3 | RNVC: 2

15 Sep 2006

5340-17-110-6701
Rops-Beugel Steun

171106701
NO PRIMARY REF 17-110-6701: RNCC: 3 | RNVC: 2
VG4510058: RNCC: 5 | RNVC: 9

14 Jan 1997

5340-17-049-8756
Padlock Set

170498756
NO PRIMARY REF 17-049-8756: RNCC: 3 | RNVC: 2

7 Apr 1978

5340-17-056-6022
Rod End

170566022
FON6-2139-5: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-109-5138
Pipe Hanger

171095138
0840.602BLAD2-1515: RNCC: 3 | RNVC: 2
1515: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-007-0405
Spring Tension Clip

170070405
NO PRIMARY REF 17-007-0405: RNCC: 3 | RNVC: 2
1050-42-2S0NDERAUSFUHRUNG: RNCC: 6 | RNVC: 9

20 Apr 1974

5340-17-108-5337
Angle Bracket

171085337
166395: RNCC: 3 | RNVC: 2

22 Nov 1994

5340-17-122-7855
Mounting Bracket

171227855
NLR5902-3: RNCC: 3 | RNVC: 2

5 Jan 2010

5340-17-025-2110
Nut And Bolt Locking Plate

170252110
0210354: RNCC: 3 | RNVC: 2
210354: RNCC: 5 | RNVC: 9

12 Jun 1974

5340-17-100-2247
Bumper

171002247
T14746: RNCC: 3 | RNVC: 2
T14746: RNCC: 5 | RNVC: 9
T14746: RNCC: 5 | RNVC: 9

1 Jan 2000

5340-17-115-0381
Mounting Bracket

171150381
352234109650: RNCC: 3 | RNVC: 2

15 Jul 2002

5340-17-114-3687
Pipe Hanger

171143687
0111-H420TF0000010: RNCC: 3 | RNVC: 2

15 Oct 2001

5340-17-104-4393
Rod End Connector

171044393
6154199: RNCC: 3 | RNVC: 2

26 Jun 1990

5340-17-109-8346
Permanent Magnet

171098346
931216-01: RNCC: 3 | RNVC: 2

20 Feb 1996

5340-17-114-3053
Webbing Strap

171143053
X32046-465: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-17-107-1735
Padlock

171071735
KB516.869-L1H30-64-215-0SL: RNCC: 3 | RNVC: 2

6 Apr 1993

5340-17-109-0921
Mounting Plate

171090921
1.16.32.32190: RNCC: 3 | RNVC: 2
3V.3232-101POS2: RNCC: 5 | RNVC: 2

25 Jul 1995

5340-17-026-8758
Webbing Strap

170268758
5340 H.17-J: RNCC: 3 | RNVC: 2
G88035-H79-L190: RNCC: 5 | RNVC: 2

17 Jun 1972

5340-17-122-7510
Clamp

171227510
6830NI-1: RNCC: 3 | RNVC: 2

10 Dec 2009

5340-17-104-2082
Handgreep

171042082
AS-A377-4-POS23: RNCC: 3 | RNVC: 2

3 Apr 1990

5340-17-047-0282
Bridge Clamp

170470282
5-123LEG16-06: RNCC: 3 | RNVC: 1
NO PRIMARY REF 17-047-0282: RNCC: 3 | RNVC: 2

10 Mar 1975

5340-17-114-8825
Mounting Bracket

171148825
612-100-2720: RNCC: 3 | RNVC: 2

27 May 2002

5340-17-120-6866
Dust And Moisture Seal Protective Cap

171206866
0.812-12 BLACK: RNCC: 3 | RNVC: 2
1401-0214: RNCC: 3 | RNVC: 2

22 Aug 2007

5340-17-103-4903
Webbing Strap

171034903
G88039-T394-A930: RNCC: 3 | RNVC: 2
TYPE 5: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-17-110-1743
Retaining Strap

171101743
04-45-20-01: RNCC: 3 | RNVC: 2

22 May 1996

5340-17-054-4535
Padlock Set

170544535
2S4005-2GSLVOORHSLF813: RNCC: 3 | RNVC: 2

16 Jun 1983

5340-17-110-3890
Retaining Strap

171103890
XX005-8518: RNCC: 3 | RNVC: 2

28 Aug 1996

5340-17-054-3231
Steun

170543231
0657854: RNCC: 3 | RNVC: 2
657854: RNCC: 5 | RNVC: 9

18 Apr 1983

5340-17-117-0761
Mounting Plate

171170761
352232551520: RNCC: 3 | RNVC: 2
3522 325 51520: RNCC: 5 | RNVC: 2

24 Nov 2004

5340-17-106-0505
Draagbeugel

171060505
G88039-T 394-A750P13: RNCC: 3 | RNVC: 2

3 Dec 1991

5340-17-117-5170
Angle Bracket

171175170
16F600: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-17-107-3039
Mounting Plate

171073039
432208293661: RNCC: 3 | RNVC: 2
4322 082 93661: RNCC: 5 | RNVC: 2

3 Jun 1993

5340-17-109-6180
Verbindingsstuk

171096180
250272-192020.002.0: RNCC: 3 | RNVC: 2

5 Dec 1995

5340-17-114-7553
Bolt And Spacer Kit

171147553
DIN6912-M8X65-8.8-A2P: RNCC: 2 | RNVC: 2

3 Apr 2002

5340-17-107-5147
Hangslot Sleutel

171075147
0844766: RNCC: 3 | RNVC: 2

8 Sep 1993

5340-17-122-8119
Filler Opening Cap

171228119
VD20498: RNCC: 3 | RNVC: 2
FS0000709: RNCC: 6 | RNVC: 9

15 Jan 2010

5340-17-122-4910
Mounting Bracket

171224910
ETZ-1009631: RNCC: 3 | RNVC: 2

17 Sep 2009

5340-17-039-0301
Mounting Plate

170390301
GRPLT100-2KL180-636NSCMD1362: RNCC: 3 | RNVC: 2
GRPLT100-2KL180-636: RNCC: 6 | RNVC: 9

4 Nov 1971

5340-17-114-5279
Vent Plug

171145279
7S236585: RNCC: 3 | RNVC: 2

10 Jan 2002

5340-17-114-7376
Retaining Strap

171147376
352233636190: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-17-102-1884
Manual Control Handle

171021884
NO PRIMARY REF 17-1021884: RNCC: 3 | RNVC: 2
0390503502: RNCC: 5 | RNVC: 9

13 Apr 1988

5340-17-123-6226
Double Angle Bracket

171236226
LET00174: RNCC: 3 | RNVC: 2
P-8883/1 RIGHT: RNCC: 5 | RNVC: 2

16 Mar 2011

5340-17-104-4661
Flush Lock

171044661
KB505.553-2L15.10-1-110/9-2SL: RNCC: 3 | RNVC: 2

10 Jul 1990

5340-17-053-4839
Beugel

170534839
352232594050: RNCC: 3 | RNVC: 2

19 May 1984

5340-17-102-3516
Shockmount

171023516
352243341800: RNCC: 3 | RNVC: 2

8 Jun 1988

5340-17-105-0040
Spacing Threaded Standoff

171050040
352232072810: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-17-113-0892
Retaining Strap

171130892
818.2396: RNCC: 3 | RNVC: 2

18 Feb 2000

5340-17-123-4700
Mounting Bracket

171234700
230250: RNCC: 3 | RNVC: 2

21 Dec 2010

5340-17-110-4208
Support Hook

171104208
1401311: RNCC: 3 | RNVC: 2
OPHANGSTEUN, GROOT: RNCC: 5 | RNVC: 2

11 Sep 1996

5340-17-044-0600
Lasscharnier

170440600
34L150MMPENMS: RNCC: 3 | RNVC: 2

27 May 1974

5340-17-706-3434
Windhaak Ms Vast En

177063434
WINDHAAK MS VAST EN LOS SCHROEF-: RNCC: 3 | RNVC: 1
NO PRIMARY REF 17-706-3434: RNCC: 3 | RNVC: 2

30 Sep 1971

5340-17-056-4271
Key Blank

170564271
SV110KB514.049 PROFIEL 1: RNCC: 3 | RNVC: 2

17 Jun 1992

5340-17-114-1963
Mounting Plate

171141963
352232337870: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-17-114-7893
Fork

171147893
352243270600: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-17-103-5366
Seat Pipe Support

171035366
FFVAOE-340805: RNCC: 3 | RNVC: 2

29 Aug 1989

5340-17-052-9428
Terugslagventiel

170529428
390.0339: RNCC: 3 | RNVC: 2
390.0339: RNCC: 5 | RNVC: 2

4 Nov 1982

5340-17-114-5177
Retaining Strap

171145177
HW4012: RNCC: 3 | RNVC: 2
R30003: RNCC: 5 | RNVC: 2

7 Jan 2002

5340-17-002-7768
Retaining Clip

170027768
6152641: RNCC: 3 | RNVC: 2
AN30941: RNCC: 5 | RNVC: 2
6101594: RNCC: 5 | RNVC: 2
M2AN30941: RNCC: 6 | RNVC: 9

17 Jun 1972

5340-17-706-3648
Butt Hinge

177063648
NO PRIMARY REF 17-706-3648: RNCC: 3 | RNVC: 2

30 Mar 1963

5340-17-049-7825
Snap Hook

170497825
6X25MMINW: RNCC: 3 | RNVC: 2

13 Feb 1978

5340-17-114-9818
Mounting Plate

171149818
EMB39A55: RNCC: 3 | RNVC: 2

19 Jun 2002

5340-17-041-3989
Kastsluiting Beugel

170413989
432208138570: RNCC: 3 | RNVC: 2

26 Aug 1972

5340-17-108-4828
Mounting Plate

171084828
352232473970: RNCC: 3 | RNVC: 2

2 Nov 1994

5340-17-115-7756
Sliding Door Track

171157756
S533F3303201: RNCC: 3 | RNVC: 2

10 Jun 2003

5340-17-115-4160
Webbing Strap

171154160
VASTZETBAND INTERSAT-H: RNCC: 3 | RNVC: 2
A304674: RNCC: 5 | RNVC: 2

30 Jan 2003

5340-17-122-4532
Corrosion Preventive Anode

171224532
60-Z-H: RNCC: 3 | RNVC: 2

31 Aug 2009

5340-17-115-3201
Luikbegrenzer

171153201
01-4-9127BLAD1431: RNCC: 3 | RNVC: 2

10 Dec 2002

5340-17-103-4352
Demper Compleet

171034352
FFVAOE-340339: RNCC: 3 | RNVC: 2

25 Jul 1989

5340-17-053-8931
Retaining Strap

170538931
660080: RNCC: 3 | RNVC: 2

13 Mar 1987

5340-17-116-1213
Bumper

171161213
651-200-0250: RNCC: 3 | RNVC: 2

20 Jul 2000

5340-17-047-7917
Padlock

170477917
S4004-2ASH0VPL9036A831: RNCC: 3 | RNVC: 2

5 Feb 1976

5340-17-049-2265
Plug Button

170492265
W4797115PC: RNCC: 3 | RNVC: 2
040-4030R0T: RNCC: 3 | RNVC: 2

2 Mar 1977

5340-17-051-3111
Padlock Set

170513111
3S4005-3GSLV00RHSLF812: RNCC: 3 | RNVC: 2

2 May 1980

5340-17-036-5759
Turnbuckle

170365759
4501-04-33-00: RNCC: 3 | RNVC: 2

12 Aug 1970

5340-17-108-5141
Webbing Strap

171085141
1136.122BLAD5TYPE4B-VARI.L2500MM: RNCC: 3 | RNVC: 2

15 Nov 1994

5340-17-122-3671
Webbing Strap

171223671
ARK9188: RNCC: 3 | RNVC: 2

23 Jul 2009

5340-17-035-1087
Bumper

170351087
731921: RNCC: 3 | RNVC: 2

18 Nov 1969

5340-17-118-0194
Mounting Plate

171180194
06287: RNCC: 3 | RNVC: 2

25 Oct 2005

5340-17-029-0958
Retaining Strap

170290958
0541065: RNCC: 3 | RNVC: 2
541065: RNCC: 5 | RNVC: 9

17 Jun 1972

5340-17-052-3952
Webbing Strap

170523952
5340H 073 TYPE C: RNCC: 3 | RNVC: 2

5 Feb 1982

5340-17-111-4731
Hook Handle

171114731
3-A-167: RNCC: 3 | RNVC: 2

22 Jan 1998

5340-17-122-1738
Antenneopzetstuk

171221738
GEF-15.05.09: RNCC: 3 | RNVC: 2

20 May 2009

5340-17-120-5963
Handgreep

171205963
377-4-23: RNCC: 3 | RNVC: 2

9 Jul 2007

5340-17-123-1009
Permanent Magnet

171231009
80.30.004: RNCC: 3 | RNVC: 9
MAG390879: RNCC: 5 | RNVC: 2

22 Jun 2010

5340-17-121-7771
Strapping

171217771
700230: RNCC: 3 | RNVC: 2

3 Dec 2008

5340-17-121-7182
Manual Control Handle

171217182
58402050000: RNCC: 3 | RNVC: 2

11 Nov 2008

5340-17-124-0107
Mounting Bracket

171240107
2 0169-939: RNCC: 3 | RNVC: 2

25 Oct 2011

5340-17-103-4094
Locking Stay

171034094
FFVAOE-140034: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-17-706-1578
Retaining Strap

177061578
0211902: RNCC: 3 | RNVC: 2
211902: RNCC: 5 | RNVC: 9

17 Sep 1974

5340-17-707-9124
Turnbuckle

177079124
01321BLAD35-LEG4STAAL: RNCC: 3 | RNVC: 1
01321BLAD35-LEG4STAAL: RNCC: 5 | RNVC: 9

21 Aug 1968

5340-17-114-1656
Double Angle Bracket

171141656
352233056930: RNCC: 3 | RNVC: 2
3522 330 56930: RNCC: 5 | RNVC: 2

11 Jul 2001

5340-17-047-2945
Hand Crank

170472945
WW308017BU: RNCC: 3 | RNVC: 2
(241)S3118WW308017BU: RNCC: 5 | RNVC: 2
WW308017BU: RNCC: 5 | RNVC: 9
WW308017U: RNCC: 6 | RNVC: 9

15 Jul 1975

5340-17-113-9817
Mounting Bracket

171139817
660367: RNCC: 3 | RNVC: 2

17 Apr 2001

5340-17-048-0787
Installatie Beugel

5340-17-055-6196
Ad08

170556196
PNEUPAC500-A157: RNCC: 3 | RNVC: 2
DL/6515-17-054-6739: RNCC: 5 | RNVC: 1

1 Dec 1984

5340-17-121-1479
Wedge

171211479
09891: RNCC: 3 | RNVC: 2

6 Mar 2008

5340-17-056-1894
Padlock Set

170561894
S4005-M856 38STUKS 4114AA: RNCC: 3 | RNVC: 2

28 Jul 1988

5340-17-120-9958
Loop Clamp

171209958
6099-308-0050: RNCC: 3 | RNVC: 2

8 Jan 2008

5340-17-122-5966
Clamping Catch

171225966
375650: RNCC: 3 | RNVC: 2

23 Oct 2009

5340-17-115-3263
Door Hook

171153263
01-4-9127BLAD1530: RNCC: 3 | RNVC: 2

13 Dec 2002

5340-17-122-2862
Trillingsdemper

171222862
PC140-65SHORE: RNCC: 3 | RNVC: 2

25 Jun 2009

5340-17-106-0400
Rod End Clevis

171060400
NO PRIMARY REF 17-106-0400: RNCC: 3 | RNVC: 2
6.89.244: RNCC: 5 | RNVC: 9
6.89.244.00: RNCC: 5 | RNVC: 9
B587-920-519: RNCC: 5 | RNVC: 9

26 Nov 1991

5340-17-107-1381
Retaining Strap

171071381
352242176800: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-17-106-1571
Mounting Bracket

171061571
VRI70A534: RNCC: 3 | RNVC: 2

4 Feb 1992

5340-17-032-5930
Plain Solid Disk

170325930
5340 326: RNCC: 3 | RNVC: 2

17 Jun 1972

5340-17-113-2863
Cover

171132863
F9026-016-001: RNCC: 3 | RNVC: 2

8 May 2000

5340-17-056-2721
Sjorbandenset

170562721
MX7382: RNCC: 3 | RNVC: 2

15 Dec 1988

5340-17-117-5043
Angle Bracket

171175043
16D966: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-17-102-9355
Handgreep

171029355
66339 002: RNCC: 3 | RNVC: 2

14 Mar 1989

5340-17-105-2206
Mounting Bracket

171052206
1130028: RNCC: 3 | RNVC: 2
4030745: RNCC: 3 | RNVC: 2

31 Jan 1991

5340-17-115-0383
Access Cover

171150383
352233937470: RNCC: 3 | RNVC: 2

15 Jul 2002

5340-17-124-9236
Hinge

171249236
8716369101: RNCC: 3 | RNVC: 2

18 Jun 2013

5340-17-114-5899
Spacing Threaded Standoff

171145899
352232099700: RNCC: 3 | RNVC: 2

1 Feb 2002

5340-17-107-7360
Retaining Strap

171077360
20902117: RNCC: 3 | RNVC: 2
80 001 073: RNCC: 3 | RNVC: 2

21 Dec 1993

5340-17-053-6049
Wyzerplaat

170536049
VBN1A91: RNCC: 3 | RNVC: 2
352231020660: RNCC: 5 | RNVC: 2

25 Feb 1985

5340-17-044-8791
Spacing Threaded Standoff

170448791
8319: RNCC: 3 | RNVC: 2

22 Jul 1974

5340-17-054-3232
Steunplaat

170543232
0666626: RNCC: 3 | RNVC: 2
666626: RNCC: 5 | RNVC: 9

18 Apr 1983

5340-17-122-8714
Dust And Moisture Seal Protective Cap

171228714
IMT00801: RNCC: 3 | RNVC: 2

16 Feb 2010

5340-17-120-8724
Hydraulic Ram Support

171208724
150.011.520: RNCC: 3 | RNVC: 2
40830022: RNCC: 5 | RNVC: 2

8 Nov 2007

5340-17-111-0058
Mortise Bolt

171110058
48000562: RNCC: 3 | RNVC: 2

8 Jul 1997

5340-17-114-5903
Mounting Plate

171145903
352232147620: RNCC: 3 | RNVC: 2

1 Feb 2002

5340-17-114-5345
Angle Bracket

171145345
352233441460: RNCC: 3 | RNVC: 2
3522 334 41460: RNCC: 5 | RNVC: 2

11 Jan 2002

5340-17-122-8581
Turnbuckle

171228581
DIN1480-SPM8-H/H-VZIN: RNCC: 3 | RNVC: 2

8 Feb 2010

5340-17-120-5529
Mounting Bracket

171205529
363-500: RNCC: 3 | RNVC: 2

19 Jun 2007

5340-17-100-2077
Knevel

171002077
1143.312BLAD5: RNCC: 3 | RNVC: 2

1 Jan 2000

5340-17-051-5422
Snelbinder

170515422
1022520: RNCC: 3 | RNVC: 2
99.23.360.001: RNCC: 3 | RNVC: 2
0201690: RNCC: 5 | RNVC: 2
99.23.360.001: RNCC: 5 | RNVC: 9

16 Sep 1980

5340-17-051-0930
Locking Stay

170510930
NO PRIMARY REF 17-051-0930: RNCC: 3 | RNVC: 2
4936209: RNCC: 5 | RNVC: 9

22 Nov 1979

5340-17-050-8390
Dust And Moisture Seal Protective Cap-Plug

170508390
NO PRIMARY REF 17-050-8390: RNCC: 3 | RNVC: 2
352250012937: RNCC: 5 | RNVC: 2

12 Jul 1979

5340-17-124-6280
Mounting Bracket

171246280
28365-2-0: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-17-118-0665
Filler Opening Cap

171180665
FON4-9901: RNCC: 3 | RNVC: 2
FON4-9901: RNCC: 5 | RNVC: 2

10 Nov 2005

5340-17-103-4123
Cilinder Slot

171034123
SCR0065-F829: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-17-605-2249
Bearing Location Sp

176052249
NO PRIMARY REF 17-605-2249: RNCC: 3 | RNVC: 2
EP23628W1292ITEM156: RNCC: 6 | RNVC: 9
EP23628W1292ITEM156W1294ITEM27 -: RNCC: 6 | RNVC: 9

4 Feb 1968

5340-17-105-4614
Padlock

171054614
X12397-809: RNCC: 3 | RNVC: 2

16 Apr 1991

5340-17-122-0735
Sliding Door Hanger Section

171220735
S521F3253203: RNCC: 3 | RNVC: 2

7 Apr 2009

5340-17-114-4106
Mounting Plate

171144106
352232548200: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-17-004-4885
Deksel

170044885
4020532: RNCC: 3 | RNVC: 2
4028635: RNCC: 3 | RNVC: 2

17 Jun 1972

5340-17-121-0352
Mounting Bracket

171210352
28393-0: RNCC: 3 | RNVC: 2

25 Jan 2008

5340-17-123-8525
Bumper

171238525
97961-1: RNCC: 3 | RNVC: 2
97961-1: RNCC: 5 | RNVC: 2

5 Aug 2011

5340-17-049-9182
Scharnierstuk

170499182
03-4-7016BL56P0S66: RNCC: 3 | RNVC: 2

28 Apr 1978

5340-17-117-4173
Mounting Plate

171174173
5526-400: RNCC: 3 | RNVC: 2

3 Feb 2005

5340-17-106-2604
Webbing Strap

171062604
334 250-02: RNCC: 3 | RNVC: 2

25 Mar 1992

5340-17-101-3298
Protec Cap Assembly

171013298
87111: RNCC: 3 | RNVC: 2

15 Apr 1987

5340-17-115-9941
Mounting Plate

171159941
352236057360: RNCC: 3 | RNVC: 2
35223605736X: RNCC: 5 | RNVC: 2

12 Sep 2003

5340-17-051-3804
Webbing Strap

170513804
23143-5-3: RNCC: 3 | RNVC: 2

6 Jun 1980

5340-17-114-0422
Stand Base

171140422
F101026: RNCC: 3 | RNVC: 2

17 May 2001

5340-17-110-0686
Butt Hinge Leaf

171100686
340.3785: RNCC: 3 | RNVC: 2

24 Apr 1996

5340-17-114-8594
Mounting Bracket

171148594
352233454250: RNCC: 3 | RNVC: 2

16 May 2002

5340-17-114-1420
Mounting Bracket

171141420
352231507830: RNCC: 3 | RNVC: 2
3522 315 07830: RNCC: 5 | RNVC: 2

9 Jul 2001

5340-17-022-2977
Bumper

170222977
NO PRIMARY REF 17-022-2977: RNCC: 3 | RNVC: 2
2232-315POS15: RNCC: 5 | RNVC: 9

21 Aug 1968

5340-17-114-8090
Mounting Plate

171148090
352232665370: RNCC: 3 | RNVC: 2

22 Apr 2002

5340-17-125-0012
Eye Hook

171250012
8007.5622: RNCC: 3 | RNVC: 2

25 Jul 2013

5340-17-114-4254
Mounting Plate

171144254
352232602410: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-17-106-8012
Nylon Blok

171068012
HM537214: RNCC: 3 | RNVC: 2

25 Nov 1992

5340-17-706-3090
Padlock

177063090
4004A: RNCC: 3 | RNVC: 1
4005: RNCC: 5 | RNVC: 2

17 Dec 1962

5340-17-054-7003
Loop Clamp

170547003
05.04.19-019: RNCC: 3 | RNVC: 2
05.04.19-19: RNCC: 5 | RNVC: 9

17 Oct 1983

5340-17-110-0297
Hangslot

5340-17-116-4684

5340-17-117-1163
Steel Beam Flange Clip

171171163
27667-5-0: RNCC: 3 | RNVC: 2

30 Nov 2004

5340-17-125-1911
Sliding Door Track

171251911
S533F3305205: RNCC: 3 | RNVC: 2

10 Dec 2013

5340-17-117-0981
Angle Bracket

171170981
352232084420: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-17-054-6546
Buckle

170546546
083 474 000 1: RNCC: 3 | RNVC: 2

15 Sep 1983

5340-17-109-8257
Uitrusting Milieu

171098257
NO PRIMARY REF 17-109-8257: RNCC: 3 | RNVC: 2
0102500: RNCC: 3 | RNVC: 2
528000005: RNCC: 5 | RNVC: 9

13 Feb 1996

5340-17-032-7070
Oog Gesp

170327070
HN179-36000316: RNCC: 3 | RNVC: 2
003: RNCC: 3 | RNVC: 2
0742137: RNCC: 3 | RNVC: 2
742137: RNCC: 5 | RNVC: 9

11 Feb 1968

5340-17-106-8150
Mounting Plate

171068150
NO PRIMARY REF 17-106-8150: RNCC: 3 | RNVC: 2
440023: RNCC: 5 | RNVC: 9

2 Dec 1992

5340-17-123-0055
Angle Bracket

171230055
03-8713: RNCC: 3 | RNVC: 2

23 Apr 2010

5340-17-105-6182
Spacing Threaded Standoff

171056182
352232022020: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-17-114-5359
Mounting Bracket

171145359
352233446220: RNCC: 3 | RNVC: 2
3522 334 46220: RNCC: 5 | RNVC: 2

11 Jan 2002

5340-17-050-4768
Case Leg

170504768
1-077-800-04: RNCC: 3 | RNVC: 2

7 Dec 1978

5340-17-051-6233
R Bevestiging Plaat

170516233
2540 290: RNCC: 3 | RNVC: 2
79251: RNCC: 5 | RNVC: 9

28 Nov 1980

5340-17-110-7577
Access Cover

171107577
WVTB70-1 DN0080 ITEM10: RNCC: 3 | RNVC: 2

4 Mar 1997

5340-17-120-9450
Runner

171209450
9233000-P: RNCC: 3 | RNVC: 2

6 Dec 2007

5340-17-706-3290
Cane Bolt

177063290
4539-6: RNCC: 3 | RNVC: 2

24 Oct 1963

5340-17-121-3446
Protection Bellows

171213446
2 0120-350: RNCC: 3 | RNVC: 2

17 Jun 2008

5340-17-114-2110
Beugel

171142110
3400014: RNCC: 3 | RNVC: 2

25 Jul 2001

5340-17-114-6206
Access Cover

171146206
352233054150: RNCC: 3 | RNVC: 2

12 Feb 2002

5340-17-104-3517
Deksel

171043517
50.301.610: RNCC: 3 | RNVC: 2
50.301.610NSCMD8814: RNCC: 3 | RNVC: 2

15 May 1990

5340-17-049-8751
Hangslotenstel

5340-17-109-8084
Link

5340-17-112-6847
Hoek Steun

5340-17-104-4502
Mounting Plate

171044502
352249621800: RNCC: 3 | RNVC: 2

3 Jul 1990

5340-17-112-4796
Mounting Plate

171124796
P0672236: RNCC: 3 | RNVC: 2
P0672236: RNCC: 5 | RNVC: 2

12 Mar 1999

5340-17-123-9800
Mounting Bracket

171239800
6104SW559: RNCC: 3 | RNVC: 2

13 Oct 2011

5340-17-105-5105
Mounting Bracket

171055105
352232652130: RNCC: 3 | RNVC: 2

7 May 1991

5340-17-054-8191
Retaining Strap

170548191
5340 280: RNCC: 3 | RNVC: 2

5 Dec 1983

5340-17-120-8715
Mounting Bracket

171208715
183-6153: RNCC: 3 | RNVC: 2
15012620: RNCC: 5 | RNVC: 2

8 Nov 2007

5340-17-032-0109
Webbing Strap

170320109
NO PRIMARY REF 17-032-0109: RNCC: 3 | RNVC: 2
1500X38: RNCC: 5 | RNVC: 9

17 Jun 1972

5340-17-114-2399
Type 6 Spanriem

171142399
G88039-L3949-A060: RNCC: 3 | RNVC: 2

15 Aug 2001

5340-17-124-9919
Dust And Moisture Seal Protective Cover

171249919
8007.8976: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-17-103-3534
Klemring

171033534
8008-41/9A: RNCC: 3 | RNVC: 2
8008-41/9A: RNCC: 5 | RNVC: 9

11 Jul 1989

5340-17-049-8831
Toggle Nut

170498831
03-4-7016BL60P0S76: RNCC: 3 | RNVC: 2

11 Apr 1978

5340-17-114-5769
Spacing Threaded Standoff

171145769
352233636820: RNCC: 3 | RNVC: 2
3522 336 36820: RNCC: 5 | RNVC: 2

28 Jan 2002

5340-17-114-3917
Angle Bracket

171143917
352232337590: RNCC: 3 | RNVC: 2

22 Oct 2001

5340-17-101-0719
Snap Hook

171010719
74.2.20.100: RNCC: 3 | RNVC: 2
8711497067347: RNCC: 3 | RNVC: 2

4 Nov 1986

5340-17-123-2642
Dust And Moisture Seal Protective Cap

171232642
634B-PP50: RNCC: 3 | RNVC: 2
P0000218: RNCC: 5 | RNVC: 2

27 Aug 2010

5340-17-116-7677
Angle Bracket

171167677
VRI70A360: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-17-121-1165
Shear Panel Aft

171211165
RR2.543.010: RNCC: 3 | RNVC: 2

25 Feb 2008

5340-17-114-2955
Nut And Bolt Head Protective Cap

171142955
956.041/4301/43104: RNCC: 3 | RNVC: 2

11 Sep 2001

5340-17-114-2053
Webbing Strap

171142053
X32046-447: RNCC: 3 | RNVC: 2

23 Jul 2001

5340-17-114-8446
Buckle

171148446
NO PRIMARY REF 17-114-8446: RNCC: 3 | RNVC: 2
08.005: RNCC: 5 | RNVC: 9

8 May 2002

5340-17-115-3031
Bridge Clamp

171153031
01-4-9127BLAD1275RECHTS: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-17-125-0122
Manual Control Lever

171250122
8006.2952: RNCC: 3 | RNVC: 2

29 Jul 2013

5340-17-105-6841
Spacing Threaded Standoff

171056841
352232089590: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-17-114-4356
Mounting Plate

171144356
352233320960: RNCC: 3 | RNVC: 2
3522 333 20960: RNCC: 5 | RNVC: 2

30 Oct 2001

5340-17-109-5004
Retaining Strap

171095004
7177: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-705-3652
Retaining Strap

177053652
508-598: RNCC: 3 | RNVC: 2

30 Sep 1971

5340-17-049-8385
Butt Hinge

170498385
0621252: RNCC: 3 | RNVC: 2
621252: RNCC: 5 | RNVC: 9

16 Mar 1978

5340-17-054-0999
Beschermplaat

170540999
24218: RNCC: 3 | RNVC: 2

12 Jan 1983

5340-17-105-9979
Ring Speciaal

171059979
352233917661A: RNCC: 3 | RNVC: 2
3522 339 17661A: RNCC: 5 | RNVC: 2

12 Nov 1991

5340-17-110-3648
Sterilisator Deksel

171103648
4832624-71: RNCC: 3 | RNVC: 2

21 Aug 1996

5340-17-124-8682
Dust And Moisture Seal Protective Cap

171248682
8006.4723: RNCC: 3 | RNVC: 2

7 May 2013

5340-17-110-2746
Support Plate

5340-17-031-2097
Kruis Scharnier

5340-17-116-4956
Self-Locking Insert

171164956
FON2-2348-1: RNCC: 3 | RNVC: 2
FON2-2348-1: RNCC: 5 | RNVC: 9

23 Mar 2004

5340-17-104-8719
Angle Bracket

171048719
352233785720: RNCC: 3 | RNVC: 2

27 Nov 1990

5340-17-115-6485
Yoke

171156485
861728: RNCC: 3 | RNVC: 2

2 May 2003

5340-17-105-7264
Chair Pipe Support

171057264
H.R.3-S-38/2: RNCC: 3 | RNVC: 2

12 Jul 1991

5340-17-051-6232
R Bevestiging Plaat

170516232
2540 275: RNCC: 3 | RNVC: 2
79252: RNCC: 5 | RNVC: 9

28 Nov 1980

5340-17-124-6405
Bow Handle

171246405
1.601/65+X-M8-SST: RNCC: 3 | RNVC: 2

27 Nov 2012

5340-17-123-8882
Mounting Bracket

171238882
2 0138-646: RNCC: 3 | RNVC: 2

22 Aug 2011

5340-17-105-2306
Retaining Strap

171052306
10324307: RNCC: 3 | RNVC: 2
X12-501-12: RNCC: 3 | RNVC: 2

7 Feb 1991

5340-17-056-0163
Ball Socket Seat

170560163
90428: RNCC: 3 | RNVC: 2

26 Aug 1987

5340-17-117-6373
Retaining Strap

171176373
330165: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-17-118-4347
Bevestiging Flessen

171184347
BS 2004/0020: RNCC: 3 | RNVC: 2

20 Mar 2006

5340-17-110-0320
Bumper

171100320
93001-D010-LEG45: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-17-112-4487
Mounting Plate

171124487
G88039-T 394-C623P13: RNCC: 3 | RNVC: 2

19 Feb 1999

5340-17-122-4795
Hook Handle

171224795
NO PRIMARY REF 17-122-4795: RNCC: 3 | RNVC: 2
ZG7277G201: RNCC: 5 | RNVC: 2

9 Sep 2009

5340-17-120-9903
U-Vormig Klem

171209903
609-308-0040: RNCC: 3 | RNVC: 2

7 Jan 2008

5340-17-038-0451
Retaining Strap

170380451
61-17-1008BLAD17-2: RNCC: 3 | RNVC: 2

3 Jun 1971

5340-17-116-7469
Retaining Strap

171167469
KLEMSET TYPE R MAASW.30X30: RNCC: 3 | RNVC: 2

12 Jun 2004

5340-17-123-6891
Hook Handle

171236891
2 0155-605: RNCC: 3 | RNVC: 2

21 Apr 2011

5340-17-051-4920
Webbing Strap

170514920
23059-4-2: RNCC: 3 | RNVC: 2

23 Aug 1980

5340-17-047-1396
Borgsleutel

170471396
B17005LEG14: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-17-055-6009
Angle Bracket

170556009
X12117-043: RNCC: 3 | RNVC: 2

21 Nov 1984

5340-17-117-2196
Angle Bracket

171172196
27878-0: RNCC: 3 | RNVC: 2

17 Dec 2004

5340-17-111-3292
Nut And Bolt Retainer

171113292
145-67-1019-A: RNCC: 3 | RNVC: 2

25 Nov 1997

5340-17-110-6186
Dust And Moisture Seal Protective Cap

171106186
5027-1-050: RNCC: 3 | RNVC: 2

4 Dec 1996

5340-17-117-0086
Sash Pole

171170086
375815: RNCC: 3 | RNVC: 2

2 Nov 2004

Load More Results