What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Permanent Magnet?

A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Compression Cup?

A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Rigid Caster?

A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Barrel Bolt?

A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.

What is a Surface Bolt?

A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Door Hook And Eye?

A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.

What is a Hinged Hasp?

A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.

What is a Sliding Door Hanger?

A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.

What is an Elbow Catch?

An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

What is a Sliding Door Track Bracket?

A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Rope Cleat?

A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Furniture Leg Tip?

A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.

What is a Screw Hook?

A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Bolt And Spacer Kit?

A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

Hardware, Commercial - Netherlands (NL)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Netherlands (NL) - NCB is 17

Page 11 of 31

NSN Format for Hardware, Commercial
Codified by Netherlands

53	40	17	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Netherlands (NL)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Permanent Magnet? 37 Items: A Permanent Magnet (MAGNET,PERMANENT) is an object of various materials, that retains a magnetic field for an indefinite period of time after the magnetizing force has been removed. Excludes ELECTROMAGNET; magnetized hand tools; and compass needles.
What is a Turnbuckle? 102 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 40 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Holder,Spring 44 Items
What is a Compression Cup? 18 Items: A Compression Cup (CUP,COMPRESSION) is a nonmetallic cup-shaped item designed to be located within a cylinder, and whose contact edge with the cylinder walls is usually feathered. This item, by means of extrusion, makes close physical contact with the cylinder walls in order to prevent the escape of internal pressure. The item may have a center hole and/or bolt holes. Excludes CUP, HYDRAULIC BRAKE CYLINDER.
What is a Rod End Connector? 30 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 17 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 104 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is a Metal Grille? 50 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Retaining Strap? 533 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Rigid Caster? 26 Items: A Rigid Caster (CASTER,RIGID) is a caster designed to maintain the rotation of the wheel(s) or spherical constructed item in one plane.
What is a Swivel Caster? 103 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Barrel Bolt? 21 Items: A Barrel Bolt (BOLT,BARREL) is a bolt with a cylindrical bar guided in a cylindrical socket or barrel, mounted on a single attachment plate and manually operated by means of a knob projecting from approximately mid-length of the bar. It is usually installed in a horizontal position. Excludes BOLT (2), CHAIN; BOLT (2), FOOT; and BOLT (2), WINDOW, SPRING.
What is a Surface Bolt? 14 Items: A Surface Bolt (BOLT,SURFACE) is a bar of various cross-sectional shapes that must be mounted to the face of a door by means of guides, plate, straps and the like. The bar is manually operated by a knob, grip or projection located at one end and is normally installed in the horizontal position.
What is a Shelf Bracket? 11 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Door Hook And Eye? 12 Items: A Door Hook And Eye (HOOK AND EYE,DOOR) is a holding device consisting of a shank with a hook-shaped head and an eye-shaped end, and a separate eye screw into which the head of the hook fits for holding doors, screens, and the like in a fixed position. the eye-shaped end may or may not have an eye screw attached. See also EYE HOOK. Excludes HOOK, DOOR.
What is a Hinged Hasp? 15 Items: A Hinged Hasp (HASP,HINGED) is an item consisting of a hinged strap with a slot in one end through which a loop or staple may pass. When a loop or staple is passed through the slot in the strap, a means of securing the two parts together is afforded. It may include a staple.
What is a Sliding Door Hanger? 49 Items: A Sliding Door Hanger (HANGER,SLIDING DOOR) is a metal device, which rides on a sliding door track and which consists of a truck with wheel(s) which engage the track, and some means such as an apron or bolt which fastens to and holds the door in place.
What is an Elbow Catch? 15 Items: An Elbow Catch (CATCH,ELBOW) is a fastening device consisting of a base plate, usually rectangular in shape, a notched bevel bolt which is integral with a thumb lever, and a strike. Attachment of the bolt and lever to the base plate is obtained by means of a pin located at the vertex of the right angle formed by bolt and lever. The bolt is designed to interlock with its notched bevel strike. Catch can be operated from one side only.
What is a Friction Catch? 22 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Flush Lock? 326 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 36 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 26 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Sliding Door Track? 33 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Sliding Door Track Bracket? 17 Items: A Sliding Door Track Bracket (BRACKET,TRACK,SLIDING DOOR) is a fabricated item for fastening to a supporting member and which holds and supports the sliding door track. It may have attachments and serve additional functions as a center or end stop for the door, or to lock adjoining sections of track.
What is a Mortise Lock Set? 13 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 14 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
What is a Rope Cleat? 10 Items: A Rope Cleat (CLEAT,ROPE) is a device consisting of a single or twin base, designed to check or support line or rope. It may have projecting horns extending outwardly, rotating cams, V-shaped groove, and the like. Use on boats, piers, awnings, flagpoles, and the like.
What is a Butt Hinge Leaf? 87 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 117 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 16 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is a Door Hook? 15 Items: A Door Hook (HOOK,DOOR) is a holding device consisting of a single or double jointed shank, with a hook-shaped head, and two eye pads, one into which the head of the hook fits; the other hinged to the shank or fastened by an eye formed in the shank end. Excludes HOOK AND EYE, DOOR.
What is an Expansion Shield? 35 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 90 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 78 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 14 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Furniture Leg Tip? 17 Items: A Furniture Leg Tip (TIP,FURNITURE LEG) is a device designed to fit over the legs of chairs, beds, tables and the like, to provide floor protection, and to prevent slippage. For items having suction grip wearing surface, use TIP, CANE AND CRUTCH.
What is a Screw Hook? 21 Items: A Screw Hook (HOOK,SCREW) is a small hook with a threaded shank for screwing into woodwork or paneling.
What is a Corrosion Preventive Anode? 25 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 80 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 216 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 96 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 88 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 47 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Bolt And Spacer Kit? 30 Items: A Bolt And Spacer Kit is an item consisting of one or more spacers and one or more bolts. It may include such related items as nuts, cotter pins, and washers.
What is a Support Hook? 11 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 40 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Plain Solid Disk? 76 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 676 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 18 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 74 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Padlock Set? 310 Items: A Padlock Set is two or more PADLOCK which are keyed alike and/or master keyed. It may consist of two or more specific groups of PADLOCK, each group being keyed alike and/or master keyed.
What is a Buckle? 67 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 216 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 77 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 53 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 11 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Case Leg? 10 Items: A Case Leg (LEG,CASE) is an item which, in conjunction with one or more similar items, supports a case.
Hook,Hammock 14 Items
What is a Catch Strike? 63 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 13 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Retaining Band? 45 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 98 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 10 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 43 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 222 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 30 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 22 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 521 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 81 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 35 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 12 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 73 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 179 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 28 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 59 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 18 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 40 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 95 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 46 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 42 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Pawl Fastener? 10 Items: A Pawl Fastener (FASTENER,PAWL) is a self-contained item with a knob or a key actuated pawl, designed to fasten panels, doors, and the like, to frames or adjoining surfaces. The pawl may be preset to accommodate frames or surfaces of a specific thickness, or may be adjustable to accommodate frames or surfaces of variable thicknesses. For items with adjustable pawls, the pawl must be actuated through continual rotation of the knob or key until the pawl engages the adjoining surface.
What is a Vent Plug? 13 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 412 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 13 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 13 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is an Antipilferage Seal? 11 Items: An Antipilferage Seal (SEAL,ANTIPILFERAGE) is a closure device that serves as a check against tampering or unauthorized opening. The seal must be severed or mutilated before entry is possible. It can be supplied with a cord, a pin, a WIRE,LOCKING,ANTIPILFERAGE SEAL 41887 or a PRESS LEAD SEAL,HAND 05677.
What is a Manual Control Handle? 100 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 12 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Seal Retaining Plate? 19 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 25 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Metallic Solid Wheel? 10 Items: A Metallic Solid Wheel (WHEEL,SOLID,METALLIC) is an item which is cast or molded from various metals, which may be ferrous or nonferrous. It does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL (1), PNEUMATIC TIRE; and WHEEL (1), METAL TIRE.
What is a Mounting Bracket? 1072 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Section Block Clamp? 10 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Retaining Bail? 16 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 1177 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Synchro Clamp? 45 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 33 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 339 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 39 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is an Arched Cushion? 12 Items: An Arched Cushion (CUSHION,ARCHED) is a nonmetallic item designed to fit inside a CLAMP, LOOP and/or a STRAP, RETAINING. It positions tubes, hoses, and the like, and protects the items from damage by absorbing shock and vibration. It has one or more arched slots. For items that are fabricated as one piece and completely surround the internal periphery see GROMMET, NONMETALLIC.
What is a Pipe Hanger? 78 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 20 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 16 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 46 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Mortise Lock? 13 Items: A Mortise Lock (LOCK,MORTISE) is a lock which is designed to be fitted into the edge of a DOOR, DRAWER, or the like. The lock does not include KNOB(S), ROSE(S), STRIKE(S), DOOR PULL(S), RELEASE BAR (S), and the like.
What is a Dust And Moisture Seal Protective Cover? 45 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Sliding Block? 12 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is a Nut And Bolt Head Protective Cap? 11 Items: A Nut And Bolt Head Protective Cap (CAP,PROTECTIVE,NUT AND BOLT HEAD) is a cap of various shapes, sizes and materials, specially designed to fit over a nut or bolt head to provide protection from corrison, impairments, sticking paint, motar and the like.
What is an Utility Access Door? 40 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 363 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 21 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Key Holder? 15 Items: A Key Holder (HOLDER,KEY) is an item specifically designed to organize and store key(s). It must have hooks(s) and/or ring(s) which allow for quick storage and removal of the key(s). It may be a case, tray, strip, and the like, and may have provisions for mounting or can be stored in/on a drawer, shelf, file cabinet and the like, or can be carried on one's person. Excludes CABINET,KEY.
What is a Key Blank? 166 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Detent Plunger? 34 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Manual Control Lever? 27 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Locking Stay? 41 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Sliding Door Hanger Section? 34 Items: A Sliding Door Hanger Section (HANGER SECTION,SLIDING DOOR) is an item specifically designed for use as a major component of a HANGER, SLIDING DOOR. It may contain ball rollers, springs, locking device(s), and mounting provisions.
What is a Bumper? 183 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).
What is a Fouling Preventive Anode? 15 Items: A Fouling Preventive Anode (ANODE,FOULING PREVENTIVE) is an alloy rod which prevents any marine plants, animal and bacterial growth setting in heat exchangers, pumps, box coolers, and the like without damaging the environment. For anodes which prevent corrosion see ANODE, CORROSION PREVENTIVE.

Stock Items From Supply Class 5340 Page 11 of 31

5340-17-706-3436
Flush Door Ring

177063436
NO PRIMARY REF 17-706-3436: RNCC: 3 | RNVC: 2
37-05-76-70X50: RNCC: 5 | RNVC: 9

8 May 1964

5340-17-116-6375
Scherfw.Dekens Rail

171166375
060570: RNCC: 3 | RNVC: 2

4 May 2004

5340-17-107-4807
Mounting Plate

171074807
352238029180: RNCC: 3 | RNVC: 2

31 Aug 1993

5340-17-056-6350
Clamp

170566350
FON2-7331A19: RNCC: 3 | RNVC: 2

21 Nov 1995

5340-17-100-8877
Access Cover

171008877
A421455-4350088: RNCC: 3 | RNVC: 2

5 Aug 1986

5340-17-050-8399
Clamping Catch

170508399
352232571710: RNCC: 3 | RNVC: 2
352232571710: RNCC: 5 | RNVC: 2

12 Jul 1979

5340-17-114-2660
Double Angle Bracket

171142660
352232460570: RNCC: 3 | RNVC: 2

29 Aug 2001

5340-17-103-4669
Scharnier Blad

5340-17-056-5943
Clamp

170565943
FON2-7332D11: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-053-4876
Barrel Bolt

170534876
352232067240: RNCC: 3 | RNVC: 2
352232067241A: RNCC: 5 | RNVC: 2

29 May 1984

5340-17-108-3844
Angle Bracket

171083844
DM-85-27: RNCC: 3 | RNVC: 2

20 Sep 1994

5340-17-106-0020
Swivel Caster

171060020
NO PRIMARY REF 17-106-0020: RNCC: 3 | RNVC: 2
SVZL-200K: RNCC: 5 | RNVC: 9

12 Nov 1991

5340-17-122-3625
Stop Assembly

171223625
216524-21: RNCC: 3 | RNVC: 9

21 Jul 2009

5340-17-106-2119
Dust And Moisture Seal Protective Cap-Plug

171062119
168X13900: RNCC: 3 | RNVC: 2

25 Feb 1992

5340-17-111-3961
Mechanic Equipment Hardware Kit

171113961
650019004: RNCC: 3 | RNVC: 2

5 Jan 1998

5340-17-114-0421
Headless Straight Rod

171140421
88LL1809 VD: RNCC: 3 | RNVC: 2

17 May 2001

5340-17-114-1567
Mounting Plate

171141567
352232603270: RNCC: 3 | RNVC: 2
3522 326 03270: RNCC: 5 | RNVC: 2

11 Jul 2001

5340-17-116-1317
Mending Plate

171161317
698-200-4830: RNCC: 3 | RNVC: 2

21 Jul 2000

5340-17-102-8802
Webbi Riemsamenstel

171028802
352202320270: RNCC: 3 | RNVC: 2
91-60-60-90-1140VD1270 OLIV DRAB: RNCC: 3 | RNVC: 2
3522 023 20270: RNCC: 5 | RNVC: 2

14 Feb 1989

5340-17-123-0500
Corrosion Preventive Anode

171230500
CU-150/600D0: RNCC: 3 | RNVC: 2
A0111500: RNCC: 5 | RNVC: 2
CU-150/650D0: RNCC: 6 | RNVC: 9

26 May 2010

5340-17-120-7261
Helft Dak- Klep

171207261
X32025-405: RNCC: 3 | RNVC: 2

12 Sep 2007

5340-17-101-7227
Hand Crank

171017227
60248-531: RNCC: 3 | RNVC: 2

29 Sep 1987

5340-17-120-5018
Sluiting Handgreep

171205018
091-311-0840: RNCC: 3 | RNVC: 2

4 Jun 2007

5340-17-118-9954
Arched Cushion

171189954
K9 11-02: RNCC: 3 | RNVC: 2

9 Oct 2006

5340-17-111-4077
Flush Lock

171114077
3724/32/36/50: RNCC: 3 | RNVC: 2

8 Jan 1998

5340-17-114-4171
Angle Bracket

171144171
352232588540: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-17-107-5874
Dust And Moisture Seal Protective Cap

171075874
050423S034: RNCC: 3 | RNVC: 2

19 Oct 1993

5340-17-001-8561
Access Cover

170018561
6119217: RNCC: 3 | RNVC: 2

16 Dec 1974

5340-17-113-2601
Mounting Plate

171132601
113.50.07.081: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-17-107-9332
Rod End Clevis

171079332
HM536225: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-17-123-0556
Corrosion Preventive Anode

171230556
S0200050: RNCC: 3 | RNVC: 2

28 May 2010

5340-17-114-5642
Angle Bracket

171145642
352233405810: RNCC: 3 | RNVC: 2
3522 334 05810: RNCC: 5 | RNVC: 2

23 Jan 2002

5340-17-124-6408
Manual Control Handle

171246408
238365: RNCC: 3 | RNVC: 2

27 Nov 2012

5340-17-105-1621
Manual Control Handle

171051621
5164059: RNCC: 3 | RNVC: 2

22 Jan 1991

5340-17-114-8602
Mounting Bracket

171148602
352233716180: RNCC: 3 | RNVC: 2

16 May 2002

5340-17-121-7314
Ferrule

171217314
1040926: RNCC: 3 | RNVC: 2

17 Nov 2008

5340-17-043-6034
Spring Holder

170436034
0224909: RNCC: 3 | RNVC: 2
BBZ4169: RNCC: 5 | RNVC: 2
224909: RNCC: 5 | RNVC: 9
7700501764: RNCC: 5 | RNVC: 9

9 Dec 1973

5340-17-117-7079
Double Angle Bracket

171177079
16C501: RNCC: 3 | RNVC: 2

31 May 2005

5340-17-041-4738
Instrument Mounting Clamp

170414738
5000367: RNCC: 3 | RNVC: 2

11 Nov 1972

5340-17-108-5348
Angle Bracket

171085348
166766: RNCC: 3 | RNVC: 2

22 Nov 1994

5340-17-111-0765
Handwheel

171110765
500279: RNCC: 3 | RNVC: 2

29 Jul 1997

5340-17-054-1499
Blokkeerpen

170541499
853.5558: RNCC: 3 | RNVC: 2

3 Feb 1983

5340-17-049-8038
Bumper

170498038
0330785: RNCC: 3 | RNVC: 2
330785: RNCC: 5 | RNVC: 9

22 Feb 1978

5340-17-054-1878
Dust And Moisture Seal Protective Plug

170541878
853.8085: RNCC: 3 | RNVC: 2
853.8085: RNCC: 5 | RNVC: 2

24 Feb 1983

5340-17-116-4498
Slipring Unit

171164498
AUROTAC150C9316: RNCC: 3 | RNVC: 2

4 Mar 2004

5340-17-108-8029
Handwheel

171088029
6075.064.50: RNCC: 3 | RNVC: 2

21 Mar 1995

5340-17-109-4848
Plaat

171094848
0176932: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-107-9290
Angle Bracket

171079290
HM531583: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-17-103-7813
Butt Hinge

171037813
XX004-0940: RNCC: 3 | RNVC: 2

21 Nov 1989

5340-17-015-9943
Snap Hook

170159943
TVA08-035-31: RNCC: 3 | RNVC: 2

25 Nov 1970

5340-17-114-2823
Filter

171142823
G88039-L3946-L251C/024: RNCC: 3 | RNVC: 2

5 Sep 2001

5340-17-039-2376
Cushioning Pad

170392376
NO PRIMARY REF 17-039-2376: RNCC: 3 | RNVC: 2
STOOTKUSSEN: RNCC: 5 | RNVC: 1
STOOTKUSSEN: RNCC: 5 | RNVC: 9
19260: RNCC: 6 | RNVC: 9

11 Feb 1972

5340-17-104-4865
Bumper

171044865
432208190680: RNCC: 3 | RNVC: 2

24 Jul 1990

5340-17-124-6205
Butt Hinge

171246205
44309: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-17-102-6101
Dust And Moisture Seal Protective Cap

171026101
1216R135: RNCC: 3 | RNVC: 2

19 Oct 1988

5340-17-120-0450
Insert

171200450
21351(8X2): RNCC: 3 | RNVC: 2

11 Jan 2007

5340-17-120-2259
Swivel Caster

171202259
757 838: RNCC: 3 | RNVC: 2

14 Mar 2007

5340-17-117-8785
Mounting Bracket

171178785
0634147: RNCC: 3 | RNVC: 2

26 Aug 2005

5340-17-115-1695
Access Cover

171151695
VAG16D20: RNCC: 3 | RNVC: 2

30 Sep 2002

5340-17-114-5947
Retaining Strap

171145947
352232184620: RNCC: 3 | RNVC: 2

1 Feb 2002

5340-17-116-4063
Spacing Threaded Standoff

171164063
XX008-2663: RNCC: 3 | RNVC: 2

13 Feb 2004

5340-17-123-2591
Bracket

171232591
16D700-751NSCM81755: RNCC: 3 | RNVC: 2
16D700-751: RNCC: 5 | RNVC: 2

25 Aug 2010

5340-17-028-0463
Pin

170280463
4510-19-3900: RNCC: 3 | RNVC: 2

3 Feb 1975

5340-17-111-3529
Electronic Equipment Hardware Kit

171113529
734 18038 AAAA: RNCC: 3 | RNVC: 2

4 Dec 1997

5340-17-125-0966
Double Angle Bracket

171250966
2515.1369: RNCC: 3 | RNVC: 2

4 Oct 2013

5340-17-104-2516
Double Angle Bracket

171042516
799636: RNCC: 3 | RNVC: 2
79.963.600: RNCC: 3 | RNVC: 2
BS402.01561: RNCC: 5 | RNVC: 2

18 Apr 1990

5340-17-117-0973
Mounting Bracket

171170973
352232074720: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-17-115-2799
Dust And Moisture Seal Protective Cap

171152799
DIV-482: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-17-054-9651
Flush Lock

170549651
GSV2713GHGR6SLEUTELNR1915F812: RNCC: 3 | RNVC: 2

2 Feb 1984

5340-17-049-9101
Bow Handle

170499101
0623461: RNCC: 3 | RNVC: 2
623461: RNCC: 5 | RNVC: 9

25 Apr 1978

5340-17-121-8230
Retaining Band

171218230
91018290500 ZWART 5M: RNCC: 3 | RNVC: 2

24 Dec 2008

5340-17-111-4089
Retaining Strap

171114089
13408A: RNCC: 3 | RNVC: 2

9 Jan 1998

5340-17-107-0809
Mending Plate

171070809
161663: RNCC: 3 | RNVC: 2

9 Mar 1993

5340-17-110-8987
Access Cover

171108987
474861: RNCC: 3 | RNVC: 2

20 May 1997

5340-17-120-5642
Klem

171205642
67.155.014: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-17-113-4400
Permanent Magnet

171134400
350719: RNCC: 3 | RNVC: 2
6105782,24MM,ZWART,CLASSIC: RNCC: 5 | RNVC: 2
350675: RNCC: 5 | RNVC: 9

11 Jul 2000

5340-17-105-7053
Klem Spindel

171057053
41211-94301: RNCC: 3 | RNVC: 2
41211-95250: RNCC: 5 | RNVC: 2

2 Jul 1991

5340-17-052-5822
Angle Bracket

170525822
X12122-011: RNCC: 3 | RNVC: 2

29 Apr 1982

5340-17-050-2955
Synchro Clamp

170502955
352232013370: RNCC: 3 | RNVC: 2

1 Aug 1978

5340-17-114-7828
Mounting Bracket

171147828
352243272200: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-17-125-0074
Double Angle Bracket

171250074
8008.1539: RNCC: 3 | RNVC: 2

26 Jul 2013

5340-17-120-5207
Lock Key

171205207
1089-U2: RNCC: 3 | RNVC: 2

12 Jun 2007

5340-17-120-4266
Haak

171204266
386005: RNCC: 3 | RNVC: 2

27 Apr 2007

5340-17-110-0507
Afbreekmesje

171100507
0102501: RNCC: 3 | RNVC: 2

17 Apr 1996

5340-17-630-9031
Handgreep

176309031
NO PRIMARY REF 17-630-9031: RNCC: 3 | RNVC: 2
222: RNCC: 6 | RNVC: 9

17 Jun 1972

5340-17-123-0642
Corrosion Preventive Anode

171230642
TYPE-II-ASTM/B418/88: RNCC: 3 | RNVC: 2

2 Jun 2010

5340-17-102-1187
Borg- Plaat

171021187
XX003-9199: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-17-049-1018
Schuifpassantrechts

170491018
NO PRIMARY REF 17-049-1018: RNCC: 3 | RNVC: 2
3125RECHTS: RNCC: 5 | RNVC: 2

24 Jan 1977

5340-17-108-0019
Bow Handle

171080019
0650339: RNCC: 3 | RNVC: 2
0371457LEG1: RNCC: 5 | RNVC: 1

30 Mar 1994

5340-17-103-8326
Steun

171038326
799315: RNCC: 3 | RNVC: 2

5 Dec 1989

5340-17-107-8159
Swivel Caster

171078159
2017017: RNCC: 3 | RNVC: 2

25 Jan 1994

5340-17-106-2449
Lagerdeksel

171062449
9099099: RNCC: 3 | RNVC: 2

11 Mar 1992

5340-17-704-5947
Turnbuckle

177045947
85010: RNCC: 3 | RNVC: 2

21 Aug 1968

5340-17-110-5499
Retaining Clip

171105499
140-376: RNCC: 3 | RNVC: 2

6 Nov 1996

5340-17-122-3222
Steun

171223222
0890900: RNCC: 3 | RNVC: 2

9 Jul 2009

5340-17-054-9642
Flush Lock

170549642
GSV2713GHGR27SLEUTELNR2517F813: RNCC: 3 | RNVC: 2

2 Feb 1984

5340-17-104-1499
Deksel Houder

171041499
4094302: RNCC: 3 | RNVC: 2

15 Mar 1990

5340-17-124-1944
Deksel

171241944
5975 0120 004: RNCC: 3 | RNVC: 2

2 Feb 2012

5340-17-120-0290
Scharnier

171200290
1000623: RNCC: 3 | RNVC: 2

5 Jan 2007

5340-17-109-6256
Mounting Plate

171096256
10508: RNCC: 3 | RNVC: 2

5 Dec 1995

5340-17-108-5047
Webbing Strap

171085047
1136.122BLAD8TYPE2C-VARI.L1000MM: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-17-053-8899
Butt Hinge

170538899
320002: RNCC: 3 | RNVC: 2

13 Mar 1987

5340-17-054-1876
Dust And Moisture Seal Protective Plug

170541876
853.8093: RNCC: 3 | RNVC: 2
853.8093: RNCC: 5 | RNVC: 2

24 Feb 1983

5340-17-101-2094
Turnbuckle

171012094
1436.313LEG78-17-18: RNCC: 3 | RNVC: 2

20 Jan 1987

5340-17-114-3866
Mounting Plate

171143866
352232492290: RNCC: 3 | RNVC: 2

18 Oct 2001

5340-17-115-2577
Testgewicht

171152577
TUIG-TESTBOEK AOR VOLGNR.5.31: RNCC: 3 | RNVC: 2

8 Nov 2002

5340-17-114-7325
Access Cover

171147325
352233053980: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-17-100-2859
Retaining Strap

171002859
VAG4C6: RNCC: 3 | RNVC: 2
352231011490: RNCC: 5 | RNVC: 2

1 Jan 2000

5340-17-111-7753
Retaining Strap

171117753
2301.15.035: RNCC: 3 | RNVC: 2

15 Apr 1998

5340-17-105-5469
Access Cover

171055469
0655919: RNCC: 3 | RNVC: 2

28 May 1991

5340-17-121-9248
Electronic Equipment Hardware Kit

171219248
3522 464 184XX: RNCC: 3 | RNVC: 2

11 Feb 2009

5340-17-118-5898
Loop Clamp

171185898
FON2-7301A32: RNCC: 3 | RNVC: 2

19 May 2006

5340-17-103-5679
Ophangarm

171035679
FFVAOE-440031: RNCC: 3 | RNVC: 2

12 Sep 1989

5340-17-123-7670
Mounting Bracket

171237670
DISPLAY STEUN: RNCC: 3 | RNVC: 2

7 Jun 2011

5340-17-109-8475
Onderbouwscharnier

171098475
15.21.80: RNCC: 3 | RNVC: 2

20 Feb 1996

5340-17-105-0113
Butt Hinge

171050113
352232457310: RNCC: 3 | RNVC: 2

20 Dec 1990

5340-17-054-2906
Links Beugel

170542906
80257L: RNCC: 3 | RNVC: 2

7 Apr 1983

5340-17-056-6240
Plate

170566240
F5103-069-009: RNCC: 3 | RNVC: 2

21 Nov 1995

5340-17-107-5456
Mechanical Stop

171075456
503304: RNCC: 3 | RNVC: 2

21 Sep 1993

5340-17-115-7759
Sliding Door Track Bracket

171157759
S533F3403204: RNCC: 3 | RNVC: 2

10 Jun 2003

5340-17-608-7832
Dust And Moisture Seal Protective Cap

176087832
8713773022095: RNCC: 3 | RNVC: 2
GPN610U6: RNCC: 3 | RNVC: 2

11 Feb 1972

5340-17-113-3272
Dust And Moisture Seal Protective Cover

171133272
35321050: RNCC: 3 | RNVC: 2

25 May 2000

5340-17-118-0017
Retaining Strap

171180017
835324324: RNCC: 3 | RNVC: 2
835324324: RNCC: 5 | RNVC: 2

27 Aug 2004

5340-17-124-6198
Mounting Plate

171246198
0852522: RNCC: 3 | RNVC: 9

26 Nov 2012

5340-17-051-2322
Coat And Hat Hook

170512322
GSV5393: RNCC: 3 | RNVC: 2

14 Mar 1980

5340-17-050-8224
Houder

170508224
352232566410: RNCC: 3 | RNVC: 2

6 Jul 1979

5340-17-105-6825
Angle Bracket

171056825
352232611760: RNCC: 3 | RNVC: 2

2 Jul 1991

5340-17-114-1533
Spacing Threaded Standoff

171141533
352232464180: RNCC: 3 | RNVC: 2
3522 324 64180: RNCC: 5 | RNVC: 2

10 Jul 2001

5340-17-118-4564
Metallic Solid Wheel

171184564
112153: RNCC: 3 | RNVC: 2

28 Mar 2006

5340-17-114-5658
Mounting Bracket

171145658
352233448210: RNCC: 3 | RNVC: 2
3522 334 48210: RNCC: 5 | RNVC: 2

24 Jan 2002

5340-17-112-5303
Swivel Caster

171125303
366.274.803: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-17-053-4567
Turnbuckle Body

170534567
VRI70A783: RNCC: 3 | RNVC: 2

28 Feb 1984

5340-17-056-3906
Hoekset

170563906
192021-A1: RNCC: 3 | RNVC: 9

9 Apr 1991

5340-17-123-0501
Corrosion Preventive Anode

171230501
FE-90/550D0: RNCC: 3 | RNVC: 2
A0130800B: RNCC: 5 | RNVC: 2
FE-80/650D0: RNCC: 6 | RNVC: 9

26 May 2010

5340-17-101-9235
Rail

171019235
NO PRIMARY REF 17-101-9235: RNCC: 3 | RNVC: 2
AS-P240-17-65: RNCC: 5 | RNVC: 9

24 Jan 1988

5340-17-113-0443
Line Supporting Strap

171130443
G88039-J3724-L221/18: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-17-111-5342
Padlock Set

171115342
85HB+IB/40-40 F812KZ: RNCC: 3 | RNVC: 2

6 Feb 1998

5340-17-102-0755
Spacing Threaded Standoff

171020755
21E-16743: RNCC: 3 | RNVC: 2

9 Mar 1988

5340-17-106-6200
Angle Bracket

171066200
X14207-401: RNCC: 3 | RNVC: 2

2 Sep 1992

5340-17-029-1252
Angle Bracket

170291252
0546813: RNCC: 3 | RNVC: 2
546813: RNCC: 5 | RNVC: 9

17 Jun 1972

5340-17-115-4826
Swivel Caster

171154826
600355-FY: RNCC: 3 | RNVC: 2

19 Feb 2003

5340-17-055-2831
Bevestiging Strip

170552831
0824740: RNCC: 3 | RNVC: 2
824740: RNCC: 5 | RNVC: 9

9 Jun 1984

5340-17-029-2546
Loop Clamp

170292546
158096: RNCC: 3 | RNVC: 2
158096: RNCC: 5 | RNVC: 9

17 Jun 1972

5340-17-114-5941
Mounting Bracket

171145941
352232183980: RNCC: 3 | RNVC: 2

1 Feb 2002

5340-17-052-2888
Spring Tension Clip

170522888
4915096: RNCC: 3 | RNVC: 2

30 Nov 1981

5340-17-114-5884
Mounting Plate

171145884
352232085180: RNCC: 3 | RNVC: 2

1 Feb 2002

5340-17-113-1066
Clamping Catch

171131066
818.3210: RNCC: 3 | RNVC: 2

22 Feb 2000

5340-17-042-2077
Cilind Schroef Slot

170422077
009SPECLIP43MM: RNCC: 3 | RNVC: 2
B20003TYPEDALIP43MM: RNCC: 5 | RNVC: 9
009SPECLIP43MM: RNCC: 5 | RNVC: 9

11 Mar 1973

5340-17-103-8608
Dust And Moisture Seal Protective Cap

171038608
168T05601: RNCC: 3 | RNVC: 2

15 Dec 1989

5340-17-105-0952
Spacing Threaded Standoff

171050952
352233660200: RNCC: 3 | RNVC: 2

10 Jan 1991

5340-17-107-3791
Frame Watertank

171073791
85207: RNCC: 3 | RNVC: 2

13 Jul 1993

5340-17-017-8551
Loop Clamp

170178551
0308819: RNCC: 3 | RNVC: 2
308819: RNCC: 5 | RNVC: 9

17 Jun 1972

5340-17-122-5793
Trillingdemper

171225793
9556 584 05200: RNCC: 3 | RNVC: 2

19 Oct 2009

5340-17-122-4914
Mounting Plate

171224914
ETZ-1009629-001: RNCC: 3 | RNVC: 2

18 Sep 2009

5340-17-053-3686
Stofring

170533686
352232463530: RNCC: 3 | RNVC: 2

10 Jun 1983

5340-17-709-1700
Strap Fastener Loop

177091700
5133: RNCC: 3 | RNVC: 2
5133: RNCC: 5 | RNVC: 9

21 Aug 1968

5340-17-114-6544
Angle Bracket

171146544
352233089680: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-17-112-1315
Draaiba Gaffelwiel

5340-17-112-9354
Draaiba Gaffelwiel

5340-17-110-6201
Retaining Strap

171106201
0891557: RNCC: 3 | RNVC: 2
0891557: RNCC: 5 | RNVC: 2

4 Dec 1996

5340-17-116-4680
Loop Clamp

171164680
D20007: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-17-104-8346
Mounting Bracket

171048346
35223363380: RNCC: 3 | RNVC: 2

20 Nov 1990

5340-17-103-6170
Spring Holder

171036170
70211: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-17-114-6205
Block

171146205
352233054140: RNCC: 3 | RNVC: 2

12 Feb 2002

5340-17-048-3788
Rim Lock

170483788
GSV3227HMARKAB: RNCC: 3 | RNVC: 2

16 Jun 1976

5340-17-050-3849
Bow Handle

170503849
0597998: RNCC: 3 | RNVC: 2
597998: RNCC: 5 | RNVC: 9

4 Oct 1978

5340-17-123-6373
Verbindingsstuk

171236373
HH00475350: RNCC: 3 | RNVC: 2
560525-BITZER: RNCC: 5 | RNVC: 2

24 Mar 2011

5340-17-105-6151
Angle Bracket

171056151
352232428800: RNCC: 3 | RNVC: 2

12 Jun 1991

5340-17-117-0015
Bouwhek Klem

171170015
E004061: RNCC: 3 | RNVC: 2
HIGH SECURITY: RNCC: 5 | RNVC: 2

29 Oct 2004

5340-17-103-3272
Retaining Strap

171033272
352231087040: RNCC: 3 | RNVC: 2
VRI28Z45: RNCC: 5 | RNVC: 2

27 Jun 1989

5340-17-107-2972
Angle Bracket

171072972
350420113281: RNCC: 3 | RNVC: 2
3504 201 13281: RNCC: 5 | RNVC: 2

3 Jun 1993

5340-17-103-6223
Steun

171036223
FFVAOE-440283: RNCC: 3 | RNVC: 2

26 Sep 1989

5340-17-115-2606
Handle Grip

171152606
612-100-2530: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-17-041-1440
Veer

170411440
FC407A3: RNCC: 3 | RNVC: 2

9 Dec 1972

5340-17-051-4935
Nut And Bolt Locking Plate

170514935
A52088LEG1: RNCC: 3 | RNVC: 2

26 Aug 1980

5340-17-124-6208
Door Closer

171246208
74435: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-17-122-9684
Flush Lock

171229684
3216F-RECHTS: RNCC: 3 | RNVC: 2

2 Apr 2010

5340-17-113-2485
Manual Control Lever

171132485
53390-345LEG505: RNCC: 3 | RNVC: 2

13 Apr 2000

5340-17-104-2527
Bumper

171042527
432208260283: RNCC: 3 | RNVC: 2

18 Apr 1990

5340-17-114-8219
Mounting Plate

171148219
352233380130: RNCC: 3 | RNVC: 2

1 May 2002

5340-17-114-9675
Access Cover

171149675
EBB7L64: RNCC: 3 | RNVC: 2

17 Jun 2002

5340-17-115-3256
Retaining Strap

171153256
1133: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-17-117-5152
Retaining Strap

171175152
16E701: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-17-115-7755
Sliding Door Track

171157755
S533F3203202: RNCC: 3 | RNVC: 2

10 Jun 2003

5340-17-117-7667
Lock Key

171177667
GTV 20971 PROFIEL 76: RNCC: 3 | RNVC: 2

17 Jun 2005

5340-17-101-3625
Angle Bracket

171013625
155N10200: RNCC: 3 | RNVC: 2

28 Apr 1987

5340-17-111-6187
Clamping Catch

171116187
1417-06-A04: RNCC: 3 | RNVC: 2

25 Feb 1998

5340-17-115-3891
Snap Hook

171153891
TUIG-TESTBOEK-LINGE-3.5.B: RNCC: 3 | RNVC: 2

20 Jan 2003

5340-17-706-3612
Butt Hinge

177063612
NO PRIMARY REF 17-706-3612: RNCC: 3 | RNVC: 2

25 Jun 1963

5340-17-109-4952
Handwheel

171094952
37330209: RNCC: 3 | RNVC: 2

14 Nov 1995

5340-17-124-6256
Mounting Plate

171246256
28528: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-17-121-0118
Bevestigingsmiddel

171210118
609-990-1560: RNCC: 3 | RNVC: 2

17 Jan 2008

5340-17-114-1373
Klem Wapen Beugel

171141373
6116: RNCC: 3 | RNVC: 2

5 Jul 2001

5340-17-114-7107
Retaining Strap

171147107
352238011380: RNCC: 3 | RNVC: 2

14 Mar 2002

5340-17-041-8325
Sjorr Riemsamenstel

170418325
1000K2401: RNCC: 3 | RNVC: 2
1000K2401: RNCC: 5 | RNVC: 9

20 Apr 1981

5340-17-053-6157
Speciaal Buis

170536157
VSV77B98: RNCC: 3 | RNVC: 2

25 Feb 1985

5340-17-055-2608
Retaining Strap

170552608
377073: RNCC: 3 | RNVC: 2
1501-73MM: RNCC: 3 | RNVC: 2

24 May 1984

5340-17-123-9085
Multiple Angle Bracket

171239085
352234671540: RNCC: 3 | RNVC: 2
3522 346 71540: RNCC: 5 | RNVC: 2

29 Aug 2011

5340-17-053-6071
Flens

170536071
VRI24M28: RNCC: 3 | RNVC: 2

25 Feb 1985

5340-17-105-5106
Doorstop

171055106
352232703180: RNCC: 3 | RNVC: 2

7 May 1991

5340-17-121-3896
Gasveer

171213896
4908DP: RNCC: 3 | RNVC: 2

2 Jul 2008

5340-17-123-6368
Corrosion Preventive Anode

171236368
CWCZ120: RNCC: 3 | RNVC: 2

24 Mar 2011

5340-17-107-8830
Extension Drawer Slide Section

171078830
352232423630: RNCC: 3 | RNVC: 2
EK070A45: RNCC: 5 | RNVC: 2

1 Mar 1994

5340-17-106-8231
Angle Bracket

171068231
XX005-9250: RNCC: 3 | RNVC: 2

2 Dec 1992

5340-17-120-4996
Padlock

171204996
ABUS-HB 65/40 LANG: RNCC: 3 | RNVC: 2

4 Jun 2007

5340-17-118-6448
Dust And Moisture Seal Protective Cap

171186448
5026: RNCC: 3 | RNVC: 2
2522 4511-513: RNCC: 5 | RNVC: 2

15 Jun 2006

5340-17-111-0959
Loop Clamp

171110959
254.000.055.000: RNCC: 3 | RNVC: 2

29 Jul 1997

5340-17-107-7743
Access Cover

171077743
80 001 012: RNCC: 3 | RNVC: 2

11 Jan 1994

5340-17-106-4888
Webbing Strap

171064888
1152.19-14-L200MM: RNCC: 3 | RNVC: 2

17 Jun 1992

5340-17-121-4065
Clamp

171214065
967645: RNCC: 3 | RNVC: 2

8 Jul 2008

5340-17-121-1524
Loop Clamp

171211524
682600: RNCC: 3 | RNVC: 2

6 Mar 2008

5340-17-114-5622
Mounting Plate

171145622
352233325450: RNCC: 3 | RNVC: 2
3522 333 25450: RNCC: 5 | RNVC: 2

23 Jan 2002

5340-17-113-1420
Headless Straight Rod

171131420
T15019: RNCC: 3 | RNVC: 2

28 Feb 2000

5340-17-115-2583
Ring

171152583
006105100001: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-17-106-4552
Access Door Locking Ring

171064552
956793: RNCC: 3 | RNVC: 2

3 Jun 1992

5340-17-105-0763
Retaining Strap

171050763
0677938: RNCC: 3 | RNVC: 2

2 Jan 1991

5340-17-051-6173
Spacing Threaded Standoff

170516173
4B40: RNCC: 3 | RNVC: 2

22 Nov 1980

5340-17-052-9697
Nut And Bolt Locking Plate

170529697
340.5796: RNCC: 3 | RNVC: 2
340.5796: RNCC: 5 | RNVC: 2

17 Nov 1982

5340-17-116-7730
Mounting Plate

171167730
VRI70A724: RNCC: 3 | RNVC: 2

23 Jun 2004

5340-17-114-6490
Mounting Plate

171146490
352233084900: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-17-117-1446
Angle Bracket

171171446
352232073450: RNCC: 3 | RNVC: 2

10 Dec 2004

5340-17-122-2135
Double Angle Bracket

171222135
SLM1000LCW BEVEST.STEUN MINIMI: RNCC: 3 | RNVC: 2

3 Jun 2009

5340-17-055-5786
Turnbuckle

170555786
117.26-657: RNCC: 3 | RNVC: 2
117.26-657: RNCC: 5 | RNVC: 2

9 Nov 1984

5340-17-112-8552
Rod Retainer Clip

171128552
95VB16241AA: RNCC: 3 | RNVC: 2
7242592: RNCC: 5 | RNVC: 2

22 Oct 1999

5340-17-004-7517
Retaining Strap

170047517
6132658: RNCC: 3 | RNVC: 2

17 Jun 1972

5340-17-120-1703
Metal Grille

171201703
DF-41: RNCC: 3 | RNVC: 2

23 Feb 2007

5340-17-116-1502
Angle Bracket

171161502
677-100-0160: RNCC: 3 | RNVC: 2

25 Jul 2000

5340-17-116-1486
Mounting Bracket

171161486
698-200-2210: RNCC: 3 | RNVC: 2

24 Jul 2000

5340-17-706-3632
Butt Hinge

177063632
NO PRIMARY REF 17-706-3632: RNCC: 3 | RNVC: 2
32-44-00: RNCC: 5 | RNVC: 9

17 Dec 1962

5340-17-103-4957
Webbing Strap

171034957
G88039-T394-A960: RNCC: 3 | RNVC: 2
TYPE 9: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-17-121-7467
Retaining Strap

171217467
06303200: RNCC: 3 | RNVC: 2
ZX.06303200: RNCC: 5 | RNVC: 2

21 Nov 2008

5340-17-109-7470
Butt Hinge Leaf

171097470
110.65.07.031: RNCC: 3 | RNVC: 2

23 Jan 1996

5340-17-106-7583
Dust And Moisture Seal Protective Cap

171067583
2540E.255: RNCC: 3 | RNVC: 2

11 Nov 1992

5340-17-117-5172
Angle Bracket

171175172
16F856: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-17-050-8225
Houder

170508225
352232566330: RNCC: 3 | RNVC: 2

6 Jul 1979

5340-17-114-8593
Mounting Bracket

171148593
352233454240: RNCC: 3 | RNVC: 2

16 May 2002

5340-17-120-4320
Kleefmiddel Aanbren

171204320
836506 - VAN LAARHOVEN TILBURG: RNCC: 3 | RNVC: 2
5340-NU-100-1093: RNCC: 5 | RNVC: 1

1 May 2007

5340-17-109-1715
Schokdemper

171091715
YS2-28: RNCC: 3 | RNVC: 2
0261.246BLAD2-7483: RNCC: 3 | RNVC: 2

29 Aug 1995

5340-17-114-4159
Mounting Plate

171144159
352232583970: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-17-104-0477
Plaat

171040477
352232554332: RNCC: 3 | RNVC: 2
3522 325 54332: RNCC: 5 | RNVC: 2

13 Feb 1990

5340-17-104-2133
Manual Control Handle

171042133
1152.113BLAD65: RNCC: 3 | RNVC: 2

3 Apr 1990

5340-17-051-1955
Bow Handle

170511955
GSV2608LANG155MM: RNCC: 3 | RNVC: 2

13 Feb 1980

5340-17-050-8230
Houder

170508230
352232494610: RNCC: 3 | RNVC: 2

6 Jul 1979

5340-17-115-1018
Retaining Strap

171151018
63N0030: RNCC: 3 | RNVC: 2

15 Aug 2002

5340-17-121-8474
Butt Hinge

171218474
555 5311: RNCC: 3 | RNVC: 2

12 Jan 2009

5340-17-113-3217
Webbing Strap

171133217
KL 4016B: RNCC: 3 | RNVC: 2

25 May 2000

5340-17-111-0254
Loop Clamp

171110254
6104SW648: RNCC: 3 | RNVC: 2

15 Jul 1997

5340-17-120-8551
Mounting Plate

171208551
185-3678: RNCC: 3 | RNVC: 2
15012510: RNCC: 5 | RNVC: 2

2 Nov 2007

5340-17-705-8622
Webbing Strap

177058622
NO PRIMARY REF 17-705-8622: RNCC: 3 | RNVC: 2

21 Aug 1968

5340-17-121-0054
Scharnier Steun

171210054
690-000-3280: RNCC: 3 | RNVC: 2

14 Jan 2008

5340-17-055-8048
Lock And Fitting Ni

170558048
1800RFCNK1878: RNCC: 3 | RNVC: 2
1800R: RNCC: 6 | RNVC: 9

25 Feb 1985

5340-17-039-6615
Plain Solid Disk

170396615
VBN21A11: RNCC: 3 | RNVC: 2
352231020770: RNCC: 5 | RNVC: 2

2 Dec 1972

5340-17-112-1434
Key Blank

171121434
R30932-PROFIEL2463: RNCC: 3 | RNVC: 2

14 Oct 1998

5340-17-107-5525
Adapter-Plaat

171075525
503321: RNCC: 3 | RNVC: 2

21 Sep 1993

5340-17-114-4076
Mounting Plate

171144076
352232522140: RNCC: 3 | RNVC: 2

29 Oct 2001

5340-17-121-0959
Electronic Equipment Hardware Kit

171210959
3522 464 271XX: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-17-122-6215
Klem

171226215
HYRO HR5LA76MM: RNCC: 3 | RNVC: 2

30 Oct 2009

5340-17-112-1163
Padlock Set

171121163
R30932-2E02-7070-2SL-SERIE112: RNCC: 3 | RNVC: 2

29 Sep 1998

5340-17-120-5008
Spacing Threaded Standoff

171205008
240294: RNCC: 3 | RNVC: 2

4 Jun 2007

5340-17-041-1438
Veer

170411438
FC346A3: RNCC: 3 | RNVC: 2

9 Dec 1972

5340-17-055-3456
Access Cover

170553456
J103293: RNCC: 3 | RNVC: 2
J846846: RNCC: 3 | RNVC: 2
J103293NSCMD1149: RNCC: 3 | RNVC: 2
J030159FCND1149: RNCC: 6 | RNVC: 9

21 Jul 1984

5340-17-104-3260
Loop Clamp

171043260
250-254: RNCC: 3 | RNVC: 2

10 May 1990

5340-17-115-7352
Arched Cushion

171157352
S326F1823200: RNCC: 3 | RNVC: 2

2 Jun 2003

5340-17-109-3246
Plain Solid Disk

171093246
185034: RNCC: 3 | RNVC: 2

17 Oct 1995

5340-17-113-4270
Angle Bracket

171134270
L47070734: RNCC: 3 | RNVC: 2

6 Jul 2000

5340-17-107-2459
Strap Hinge

171072459
HINGE121C: RNCC: 3 | RNVC: 2

11 May 1993

5340-17-706-3537
Met Embl Zegelplaat

177063537
REC0RDVELP: RNCC: 3 | RNVC: 2

7 Jun 1964

5340-17-109-7677
Snap Hook

171097677
6849: RNCC: 3 | RNVC: 2

23 Jan 1996

5340-17-111-0877
Retaining Bail

171110877
39720: RNCC: 3 | RNVC: 2

29 Jul 1997

5340-17-104-8408
Plug Button

171048408
352232472220: RNCC: 3 | RNVC: 2

20 Nov 1990

5340-17-122-9842
Bevestigingssteun

171229842
UVHGM 125MM: RNCC: 3 | RNVC: 2

13 Apr 2010

5340-17-121-6108
Vent Plug

171216108
18-3950433: RNCC: 3 | RNVC: 2
3950433: RNCC: 5 | RNVC: 2

29 Sep 2008

5340-17-114-6543
Access Cover

171146543
352233089640: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-17-114-2074
Mounting Bracket

171142074
352232432430: RNCC: 3 | RNVC: 2

23 Jul 2001

5340-17-117-1783
Mounting Plate

171171783
352233660970: RNCC: 3 | RNVC: 2
3522 336 60970: RNCC: 5 | RNVC: 2

16 Dec 2004

5340-17-122-7599
Dust And Moisture Seal Protective Cap-Plug

171227599
055 0088 000 03: RNCC: 3 | RNVC: 2

14 Dec 2009

5340-17-104-3383
Butt Hinge Leaf

171043383
352232580762: RNCC: 3 | RNVC: 2

15 May 1990

5340-17-104-1563
Aanslag

171041563
6299761: RNCC: 3 | RNVC: 2

15 Mar 1990

5340-17-115-9509
Sliding Door Hanger

171159509
S521F3233101: RNCC: 3 | RNVC: 2

28 Aug 2003

5340-17-114-8683
Rod End Clevis

171148683
092-800-8230: RNCC: 3 | RNVC: 2

22 May 2002

5340-17-118-5437
Sliding Door Hanger

171185437
S521F3211106: RNCC: 3 | RNVC: 2

3 May 2006

5340-17-051-2719
Padlock Set

170512719
36-4013-4GSL12BEUGELH18MM24BEUG-: RNCC: 3 | RNVC: 1

11 Apr 1980

5340-17-114-5703
Mounting Plate

171145703
352233633230: RNCC: 3 | RNVC: 2
3522 336 33230: RNCC: 5 | RNVC: 2

24 Jan 2002

5340-17-026-4672
Loop Clamp

170264672
0210162: RNCC: 3 | RNVC: 2
210162: RNCC: 5 | RNVC: 9

17 Jun 1972

5340-17-124-1080
Mounting Bracket

171241080
GEF.2011062216: RNCC: 3 | RNVC: 2

12 Dec 2011

5340-17-122-6555
Mounting Bracket

171226555
S321F1491201: RNCC: 3 | RNVC: 2

11 Nov 2009

5340-17-106-5308
Spring Holder

171065308
17.1.01.020-0: RNCC: 3 | RNVC: 2
17101020: RNCC: 3 | RNVC: 2
1176: RNCC: 5 | RNVC: 9

1 Jul 1992

5340-17-050-3278
Excenteras Stop

170503278
05-2-18-50A: RNCC: 3 | RNVC: 2

17 Aug 1978

5340-17-706-5295
Pad Eye

177065295
2988-2: RNCC: 3 | RNVC: 2
2988-2: RNCC: 5 | RNVC: 9

21 Aug 1968

5340-17-103-9503
Retaining Strap

171039503
10324306: RNCC: 3 | RNVC: 2
X12-501-10: RNCC: 3 | RNVC: 2

23 Jan 1990

5340-17-054-1139
Metaal Plaat

170541139
340.3149: RNCC: 3 | RNVC: 2

21 Jan 1983

5340-17-053-3680
Lifter Ball

170533680
352232477240: RNCC: 3 | RNVC: 2
352232477241: RNCC: 5 | RNVC: 1

3 Jun 1983

5340-17-115-3251
Dust And Moisture Seal Protective Cap

171153251
4422083990002: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-17-113-5219
Loop Clamp

171135219
50092460: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-17-124-6099
Mounting Plate

171246099
0668199: RNCC: 3 | RNVC: 2

26 Nov 2012

5340-17-103-5028
Sleutelkap Met Zesk

171035028
90241: RNCC: 3 | RNVC: 2

15 Aug 1989

5340-17-114-5628
Double Angle Bracket

171145628
352233381830: RNCC: 3 | RNVC: 2
3522 333 81830: RNCC: 5 | RNVC: 2

23 Jan 2002

5340-17-109-9846
Clip Met Haak

171099846
60 32 994 GE030: RNCC: 3 | RNVC: 2

28 Mar 1996

5340-17-111-0589
Retaining Strap

171110589
250.021.005.028: RNCC: 3 | RNVC: 2

29 Jul 1997

5340-17-711-0449
Webbing Strap

177110449
TVAL13LEGERGR0ENF0URNITURENGEZW: RNCC: 3 | RNVC: 2

9 Dec 1967

5340-17-114-6491
Butt Hinge Leaf

171146491
352233084990: RNCC: 3 | RNVC: 2

19 Feb 2002

5340-17-050-7513
Webbing Strap

170507513
B8638BLAD7-8: RNCC: 3 | RNVC: 2

14 May 1979

5340-17-033-0203
Spacing Threaded Standoff

170330203
352215401200: RNCC: 3 | RNVC: 2
352214075031: RNCC: 5 | RNVC: 2

6 Sep 1984

5340-17-117-5040
Butt Hinge Leaf

171175040
16C365: RNCC: 3 | RNVC: 2

17 Mar 2005

5340-17-118-6570
Spacing Threaded Standoff

171186570
3000008078: RNCC: 3 | RNVC: 2

21 Jun 2006

5340-17-117-8322
Key Blank

171178322
GTV PROV 2473: RNCC: 3 | RNVC: 2

25 Jul 2005

5340-17-123-0427
Mounting Plate

171230427
2 0134-441: RNCC: 3 | RNVC: 2

18 May 2010

5340-17-053-6110
Plaat

170536110
EFJ2A1: RNCC: 3 | RNVC: 2
352235045190: RNCC: 5 | RNVC: 2

25 Feb 1985

5340-17-117-0824
Angle Bracket

171170824
352232692900: RNCC: 3 | RNVC: 2
3522 326 92900: RNCC: 5 | RNVC: 2

24 Nov 2004

5340-17-111-4492
Cilinders Draagrek

171114492
356.2557.6902.11: RNCC: 3 | RNVC: 2

16 Jan 1998

5340-17-118-1556
Rod End Connector

171181556
S521F3299201: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-17-107-3276
Elbow Catch

171073276
08 03 140: RNCC: 3 | RNVC: 2

15 Jun 1993

5340-17-116-9477
Blind Sleutel

171169477
GSV1533: RNCC: 3 | RNVC: 2

28 Sep 2004

5340-17-109-6271
Mounting Plate

171096271
10507: RNCC: 3 | RNVC: 2

5 Dec 1995

5340-17-104-0713
Retaining Strap

171040713
352232558842: RNCC: 3 | RNVC: 2

20 Feb 1990

5340-17-112-1121
Flush Lock

171121121
R309322G057030-2SL-SERIE14VL1010: RNCC: 3 | RNVC: 2

29 Sep 1998

5340-17-101-7732
Lekbakje

171017732
6001-4113: RNCC: 3 | RNVC: 2

3 Nov 1987

5340-17-049-4166
Bevestigingsbeugel

170494166
NE326-117: RNCC: 3 | RNVC: 2
352230007940: RNCC: 5 | RNVC: 2

2 Jun 1977

5340-17-106-5032
Webbing Riemstel

171065032
1152.19-12-L300+400MM: RNCC: 3 | RNVC: 2

17 Jun 1992

5340-17-100-2270
Afdekplaat

171002270
3522 460 41100: RNCC: 3 | RNVC: 2
352246041100: RNCC: 3 | RNVC: 2

1 Jan 2000

5340-17-051-1228
Nylon Montageblokje

170511228
B2002BLAD12M0NTAGEBL0KJE: RNCC: 3 | RNVC: 2

10 Dec 1979

5340-17-123-0534
Balk

171230534
GEF. 060429//LB280: RNCC: 3 | RNVC: 2

27 May 2010

5340-17-121-3139
Electronic Equipment Hardware Kit

171213139
HRO KIT: RNCC: 3 | RNVC: 2

28 May 2008

5340-17-101-0914
Geleiderol

171010914
1434.319BLAD6: RNCC: 3 | RNVC: 2

18 Nov 1986

5340-17-124-5767
Dakplaat

171245767
GEF.20121031: RNCC: 3 | RNVC: 2

8 Nov 2012

5340-17-053-3722
Scharnierstuk

170533722
352242869600: RNCC: 3 | RNVC: 2

16 Jun 1983

5340-17-110-0870
Glijrubber

171100870
61GR80: RNCC: 3 | RNVC: 2

24 Apr 1996

5340-17-033-1519
Haspel Trekhaak

170331519
70-57A2820: RNCC: 3 | RNVC: 2
2804: RNCC: 3 | RNVC: 2

15 Jul 1968

5340-17-123-5844
Spanband

171235844
278671: RNCC: 3 | RNVC: 2

22 Feb 2011

5340-17-703-4850
Handwheel

177034850
MN2038NR5: RNCC: 2 | RNVC: 2
MN2038: RNCC: 4 | RNVC: 1

26 Aug 1970

5340-17-102-4954
Buisophangbev Plaat

171024954
713918: RNCC: 3 | RNVC: 2
713918: RNCC: 5 | RNVC: 9
713918: RNCC: 5 | RNVC: 9

31 Aug 1988

5340-17-112-0738
Antipilferage Seal

171120738
21.05563.14: RNCC: 3 | RNVC: 2

1 Sep 1998

5340-17-104-9261
Ball Socket Seat

171049261
172H04700A: RNCC: 3 | RNVC: 2

27 Nov 1990

5340-17-111-1161
Threaded Rod End

171111161
307580: RNCC: 3 | RNVC: 2
1338522: RNCC: 5 | RNVC: 2

12 Aug 1997

5340-17-103-3211
Access Cover

171033211
025F03100: RNCC: 3 | RNVC: 2

23 Jun 1989

5340-17-049-6498
Spacing Threaded Standoff

170496498
0509252: RNCC: 3 | RNVC: 2
509252: RNCC: 5 | RNVC: 9

24 Nov 1977

5340-17-112-7052
Rod End Clevis

171127052
115.50.07.354: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-17-121-7923
Mounting Plate

171217923
9551.00042: RNCC: 3 | RNVC: 2

10 Dec 2008

5340-17-054-9673
Flush Lock

170549673
GSV4150GHGR5SLEUTELNR2008F813: RNCC: 3 | RNVC: 2

2 Feb 1984

5340-17-054-9259
Angle Bracket

170549259
0636244: RNCC: 3 | RNVC: 2
636244: RNCC: 5 | RNVC: 9

23 Jan 1984

5340-17-706-3524
Shelf Bracket

177063524
976-8X10: RNCC: 3 | RNVC: 2
37-11-10-8X10: RNCC: 5 | RNVC: 9

19 Feb 1963

5340-17-055-4015
Webbing Strap

170554015
0272194: RNCC: 3 | RNVC: 2
272194: RNCC: 5 | RNVC: 9

15 Aug 1984

5340-17-114-5378
Mounting Plate

171145378
352233448130: RNCC: 3 | RNVC: 2
3522 334 48130: RNCC: 5 | RNVC: 2

11 Jan 2002

5340-17-100-0762
Handle Links

171000762
1434.320BLAD24: RNCC: 3 | RNVC: 2

1 Jan 2000

5340-17-106-3259
Hendel Kamlok

171063259
852.300000.023: RNCC: 3 | RNVC: 2

1 Apr 1992

5340-17-102-7933
Dust And Moisture Seal Protective Cap

171027933
47.09.60: RNCC: 3 | RNVC: 2
47.09.60: RNCC: 5 | RNVC: 2

17 Jan 1989

5340-17-105-8650
Vent Plug

171058650
D1651: RNCC: 3 | RNVC: 2

19 Sep 1991

5340-17-114-1433
Angle Bracket

171141433
352232197720: RNCC: 3 | RNVC: 2
3522 321 97720: RNCC: 5 | RNVC: 2

9 Jul 2001

5340-17-052-3777
Synchro Clamp

170523777
3-68217-14: RNCC: 3 | RNVC: 2

22 Jan 1982

5340-17-050-5990
Padlock

170505990
NO PRIMARY REF 17-050-5990: RNCC: 3 | RNVC: 2
TVA5340-0-6-001-10MM-KL: RNCC: 5 | RNVC: 2

26 Feb 1979

5340-17-039-5330
Rod End Clevis

170395330
0104127: RNCC: 3 | RNVC: 2
104127: RNCC: 5 | RNVC: 9

26 Aug 1972

5340-17-110-5878
Lock-Release Lever

171105878
409.CF.64.42.00: RNCC: 3 | RNVC: 2

27 Nov 1996

5340-17-120-2050
Hoekstuk

171202050
A10244: RNCC: 3 | RNVC: 2

7 Mar 2007

5340-17-053-3740
Steun

170533740
352232364880: RNCC: 3 | RNVC: 2

23 Jun 1983

5340-17-115-4939
Retaining Strap

171154939
90436.040.30.06: RNCC: 3 | RNVC: 2

25 Feb 2003

5340-17-100-0867
Beugel

171000867
352236007660: RNCC: 3 | RNVC: 2

21 Jan 1987

5340-17-120-5638
Putting

171205638
70.310.006: RNCC: 3 | RNVC: 2

21 Jun 2007

5340-17-120-3611
Clamping Catch

171203611
1000 U6813A166232491: RNCC: 3 | RNVC: 2

12 Apr 2007

5340-17-117-7326
Metal Grille

171177326
666514: RNCC: 3 | RNVC: 2

6 Jun 2005

5340-17-101-7105
Geleidestripsamenst

171017105
1433.323LEG16-17-18-20: RNCC: 3 | RNVC: 2

24 Sep 1987

5340-17-115-4135
Dakplaat

171154135
7826882: RNCC: 3 | RNVC: 2

30 Jan 2003

5340-17-114-1584
Mending Plate

171141584
352232698140: RNCC: 3 | RNVC: 2
3522 326 98140: RNCC: 5 | RNVC: 2

11 Jul 2001

5340-17-003-3408
Huis

170033408
5051890: RNCC: 3 | RNVC: 2
5068966: RNCC: 3 | RNVC: 2

17 Jun 1972

5340-17-003-3412
Access Cover

170033412
5053069: RNCC: 3 | RNVC: 2

16 Dec 1974

5340-17-047-2175
Spacing Threaded Standoff

170472175
352211103721: RNCC: 3 | RNVC: 2

30 May 1975

5340-17-029-3186
Nut And Bolt Locking Plate

170293186
0234165: RNCC: 3 | RNVC: 2
234165: RNCC: 5 | RNVC: 9

15 Jan 1974

5340-17-049-4801
Klem

170494801
VBR201A147: RNCC: 3 | RNVC: 2

21 Jul 1977

5340-17-054-9664
Flush Lock

170549664
GSV2713GHGR27SLEUTELNR1013F812: RNCC: 3 | RNVC: 2

2 Feb 1984

5340-17-110-4217
Mounting Plate

171104217
1401355: RNCC: 3 | RNVC: 2
PANEEL, 1000X200 MM: RNCC: 5 | RNVC: 2

11 Sep 1996

5340-17-100-7154
Schetsplaat

171007154
NX36207: RNCC: 3 | RNVC: 2

29 Apr 1986

5340-17-105-6402
Mounting Plate

171056402
352232523180: RNCC: 3 | RNVC: 2

18 Jun 1991

5340-17-123-2768
Block Clamp

171232768
S327F4567200: RNCC: 3 | RNVC: 2

2 Sep 2010

5340-17-050-8229
Houder

170508229
352232494600: RNCC: 3 | RNVC: 2

6 Jul 1979

5340-17-122-7993
Grendelsluiting

171227993
237011: RNCC: 3 | RNVC: 2

12 Jan 2010

5340-17-114-1546
Mending Plate

171141546
352232466390: RNCC: 3 | RNVC: 2
3522 324 66390: RNCC: 5 | RNVC: 2

10 Jul 2001

5340-17-122-3453
Index

171223453
114.48.07.162: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-17-105-9362
Mounting Bracket

171059362
3080005: RNCC: 3 | RNVC: 2

22 Oct 1991

5340-17-100-2878
Aanslagblok

171002878
VBT7A46: RNCC: 3 | RNVC: 2
352231029700: RNCC: 5 | RNVC: 2

1 Jan 2000

5340-17-106-1735
Webbing Strap

171061735
06 08 121: RNCC: 3 | RNVC: 2

11 Feb 1992

5340-17-113-2342
Dust And Moisture Seal Protective Cap-Plug

171132342
859.7324: RNCC: 3 | RNVC: 2

5 Apr 2000

5340-17-046-3827
Sliding Door Hanger

170463827
HELMNR591: RNCC: 3 | RNVC: 2
HELMNR591: RNCC: 5 | RNVC: 9

22 Sep 1980

5340-17-113-9986
Mounting Bracket

171139986
663537: RNCC: 3 | RNVC: 2

18 Apr 2001

5340-17-109-8295
Key Blank

171098295
20971-PROFIEL 3: RNCC: 3 | RNVC: 2

13 Feb 1996

5340-17-113-3530
Plain Solid Disk

171133530
9612ZT247: RNCC: 3 | RNVC: 2

9 Jun 2000

5340-17-101-6877
Butt Hinge

171016877
320023: RNCC: 3 | RNVC: 2

16 Sep 1987

5340-17-106-4897
Webbing Strap

171064897
1152.19-12-KLEMGESP-L320MM: RNCC: 3 | RNVC: 2

17 Jun 1992

5340-17-124-7617
Angle Bracket

171247617
S551F1109052: RNCC: 3 | RNVC: 2

7 Feb 2013

5340-17-102-8600
Webbing Riemstel

171028600
1152.19-12-L400+500MM: RNCC: 3 | RNVC: 2

7 Feb 1989

5340-17-053-6089
Excenterflens

170536089
VRI24N15: RNCC: 3 | RNVC: 2

25 Feb 1985

5340-17-114-5367
Mounting Plate

171145367
352233446960: RNCC: 3 | RNVC: 2
3522 334 46960: RNCC: 5 | RNVC: 2

11 Jan 2002

5340-17-100-3027
Balk

171003027
VRI22Z29: RNCC: 3 | RNVC: 2
352231082070: RNCC: 5 | RNVC: 2

1 Jan 2000

5340-17-056-5805
Key Blank

170565805
B22: RNCC: 3 | RNVC: 2

19 Sep 1995

5340-17-052-7051
Spring Holder

170527051
352232492932: RNCC: 3 | RNVC: 2

5 Jul 1982

5340-17-116-7815
Locking Device

171167815
352243271000: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-17-106-2225
Snap Hook

171062225
74.2.18.070: RNCC: 3 | RNVC: 2
8711497067231: RNCC: 3 | RNVC: 2

25 Feb 1992

5340-17-105-6613
Mounting Plate

171056613
352232395810: RNCC: 3 | RNVC: 2

25 Jun 1991

5340-17-100-2904
Astap

171002904
VBT7A3: RNCC: 3 | RNVC: 2
352231029630: RNCC: 5 | RNVC: 2

1 Jan 2000

5340-17-104-4327
Spring Holder

171044327
5164858: RNCC: 3 | RNVC: 2

26 Jun 1990

5340-17-105-6540
Extension Drawer Slide Section

171056540
352232472840: RNCC: 3 | RNVC: 2

25 Jun 1991

5340-17-053-3927
Lamphouder

170533927
352232477190: RNCC: 3 | RNVC: 2
352232477191: RNCC: 5 | RNVC: 1

5 Sep 1983

5340-17-120-2337
Wandpaneel

171202337
INEXA 2SF 600X2100X25: RNCC: 3 | RNVC: 2

16 Mar 2007

5340-17-116-6188
Mounting Plate

171166188
VRI70A138: RNCC: 3 | RNVC: 2

28 Apr 2004

5340-17-045-9739
Draad Veer

170459739
432208145553: RNCC: 3 | RNVC: 2

9 Dec 1974

5340-17-110-6866
Clip Spring

171106866
116.35.07.215: RNCC: 3 | RNVC: 2

21 Jan 1997

5340-17-125-0985
Mounting Bracket

171250985
8003.7753: RNCC: 3 | RNVC: 2

4 Oct 2013

5340-17-117-0942
Retaining Strap

171170942
352232071870: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-17-043-5219
Dopmoer En Koppelpe

170435219
AMG79571A EN AMG81392A: RNCC: 3 | RNVC: 2
AMG79571A EN AMG81392A: RNCC: 3 | RNVC: 2

27 Jun 1989

5340-17-107-9728
Mounting Bracket

171079728
0671116: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-17-124-2991
Spring Tension Clip

171242991
S522F3117205: RNCC: 3 | RNVC: 2

10 Apr 2012

5340-17-054-9983
Snap Hook

170549983
30.249: RNCC: 3 | RNVC: 2

15 Feb 1984

5340-17-109-8424
Webbing Strap

171098424
1163.05.24.15LEG101: RNCC: 3 | RNVC: 2

20 Feb 1996

5340-17-051-0796
Angle Bracket

170510796
X10985-061: RNCC: 3 | RNVC: 2

13 Nov 1979

5340-17-120-0318
Rail

171200318
RAIL: RNCC: 3 | RNVC: 2

8 Jan 2007

5340-17-107-2752
Padlock Set

171072752
1152.05-22-TYPE 4-GEMERKT F827S-: RNCC: 3 | RNVC: 1

18 May 1993

5340-17-112-7511
Pipe Pulling Head Set

171127511
150.582.006: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-17-054-2971
Strip

170542971
0656916: RNCC: 3 | RNVC: 2
656916: RNCC: 5 | RNVC: 9

11 Apr 1983

5340-17-042-8231
Cilin Blind Sleutel

170428231
25-30-3X9MM: RNCC: 3 | RNVC: 2

22 Jul 1973

5340-17-109-0194
Angle Bracket

171090194
HM536406: RNCC: 3 | RNVC: 2

21 Jun 1995

5340-17-107-7355
Access Cover

171077355
20902112: RNCC: 3 | RNVC: 2
80 001 060: RNCC: 3 | RNVC: 2

21 Dec 1993

5340-17-116-1868
Angle Bracket

171161868
113.35.07.106: RNCC: 3 | RNVC: 2

5 Nov 2003

5340-17-046-4209
Draad Veer

170464209
432208148030: RNCC: 3 | RNVC: 2

11 Feb 1975

5340-17-103-4145
Cilinder Slot

171034145
SPE4464-ZWART-F827: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-17-100-7713
Kapsamenstel

171007713
NX14070: RNCC: 3 | RNVC: 2

3 Jun 1986

5340-17-103-5963
Door Holder

171035963
375370: RNCC: 3 | RNVC: 2

19 Sep 1989

5340-17-050-6286
Transom Chain

170506286
089C02400: RNCC: 3 | RNVC: 2

20 Mar 1979

5340-17-116-4591
Track-Ball Block

171164591
432208172520: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-17-054-0097
Deksel

170540097
352210542940: RNCC: 3 | RNVC: 2

30 Nov 1982

5340-17-122-7566
Mounting Plate

171227566
I0005427: RNCC: 3 | RNVC: 2

11 Dec 2009

5340-17-122-7379
Flens

171227379
G20690: RNCC: 3 | RNVC: 2
G20690: RNCC: 3 | RNVC: 2

3 Dec 2009

5340-17-124-9535
Angle Bracket

171249535
8010.1029: RNCC: 3 | RNVC: 2

10 Jul 2013

5340-17-123-6517
Testdop

171236517
P990026839: RNCC: 3 | RNVC: 2
P1417POS 01/33: RNCC: 5 | RNVC: 2

31 Mar 2011

5340-17-104-4373
Bumper

171044373
04-06-50-290: RNCC: 3 | RNVC: 2

26 Jun 1990

5340-17-114-8073
Mounting Plate

171148073
352232664770: RNCC: 3 | RNVC: 2

22 Apr 2002

5340-17-117-1787
Butt Hinge Leaf

171171787
352233661010: RNCC: 3 | RNVC: 2
3522 336 61010: RNCC: 5 | RNVC: 2

16 Dec 2004

5340-17-108-6925
Dust And Moisture Seal Protective Cap-Plug

171086925
4730 108 002: RNCC: 3 | RNVC: 2

7 Feb 1995

5340-17-032-2519
Retaining Strap

170322519
0327665: RNCC: 3 | RNVC: 2
327665: RNCC: 5 | RNVC: 9

17 Jun 1972

5340-17-104-0499
Angle Bracket

171040499
352232665641: RNCC: 3 | RNVC: 2
352232665640: RNCC: 5 | RNVC: 2

13 Feb 1990

5340-17-055-1478
Lager Montage Plaat

170551478
5120 231: RNCC: 3 | RNVC: 2

3 Apr 1984

5340-17-105-8058
Hijsjuk T.B.V. Moto

171058058
0694892: RNCC: 3 | RNVC: 2
694892: RNCC: 5 | RNVC: 9

20 Aug 1991

5340-17-101-2636
Synchro Clamp

171012636
5340 327: RNCC: 3 | RNVC: 2

23 Mar 1987

5340-17-101-8251
Plaat

171018251
2320C 145 015: RNCC: 3 | RNVC: 2

11 Nov 1987

5340-17-117-5179
Sliding Block

171175179
242400: RNCC: 3 | RNVC: 2

18 Mar 2005

5340-17-052-9344
Angle Bracket

170529344
X12108-001: RNCC: 3 | RNVC: 2
X12109-001: RNCC: 3 | RNVC: 2

1 Nov 1982

5340-17-120-3599
Fork

171203599
02-00062 ITEM 35: RNCC: 3 | RNVC: 2

12 Apr 2007

5340-17-114-7352
Mounting Plate

171147352
352233605210: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-17-035-1171
Retaining Strap

170351171
7414344: RNCC: 3 | RNVC: 2

18 Nov 1969

5340-17-113-2343
Dust And Moisture Seal Protective Cap-Plug

171132343
859.7316: RNCC: 3 | RNVC: 2

5 Apr 2000

5340-17-115-7036
Kunststo Slijtplaat

171157036
310.118: RNCC: 3 | RNVC: 2

21 May 2003

5340-17-121-2132
Houdersamenstel

171212132
28467: RNCC: 3 | RNVC: 2

11 Apr 2008

5340-17-102-0493
Nut And Bolt Locking Plate

171020493
0240374: RNCC: 3 | RNVC: 2
240374: RNCC: 5 | RNVC: 9

3 Mar 1988

5340-17-113-1041
Bail Handle

171131041
818.0911: RNCC: 3 | RNVC: 2

22 Feb 2000

5340-17-051-3464
Webbing Strap

170513464
144L04100: RNCC: 3 | RNVC: 2

20 May 1980

5340-17-049-2264
Plug Button

170492264
W4797115KC: RNCC: 3 | RNVC: 2
040-3030R0T: RNCC: 3 | RNVC: 2

2 Mar 1977

5340-17-107-3047
Poot (Voor) Lassam.

171073047
0844890: RNCC: 3 | RNVC: 2

3 Jun 1993

5340-17-111-0580
Clip Retainer Plate

171110580
141.1043.326045: RNCC: 3 | RNVC: 2

29 Jul 1997

5340-17-107-9724
Mounting Bracket

171079724
0650474: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-17-054-9643
Flush Lock

170549643
GSV2713GHGR28SLEUTELNR0711F813: RNCC: 3 | RNVC: 2

2 Feb 1984

5340-17-114-6641
Angle Bracket

171146641
AP1182LDW: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-17-103-4154
Cilinder Slot

171034154
SPE4453-ZWART-F828: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-17-114-4161
Mounting Plate

171144161
352232583990: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-17-007-6454
Koppel Haak

170076454
TVA08-035-8A: RNCC: 3 | RNVC: 2
5340H3: RNCC: 3 | RNVC: 2

4 Jul 1972

5340-17-114-4474
Mounting Bracket

171144474
7950-066-421: RNCC: 3 | RNVC: 2

9 Nov 2001

5340-17-103-4160
Cilinder Slot

171034160
SPE4453-ZWART-F834: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-17-124-7714
Stang

171247714
X26336-466: RNCC: 3 | RNVC: 2

18 Feb 2013

5340-17-029-5285
Support Hook

170295285
3105: RNCC: 3 | RNVC: 2

21 Aug 1968

5340-17-107-7369
Access Cover

171077369
20902128: RNCC: 3 | RNVC: 2
80 001 053: RNCC: 3 | RNVC: 2

21 Dec 1993

5340-17-103-9636
Webbing Strap

171039636
6341438: RNCC: 3 | RNVC: 2

23 Jan 1990

5340-17-121-5530
Wedge

171215530
025435: RNCC: 3 | RNVC: 2

4 Sep 2008

5340-17-116-6394
Angle Bracket

171166394
S538F1705203: RNCC: 3 | RNVC: 2

5 May 2004

5340-17-102-6334
Webbing Strap

171026334
1136.122BLAD3TYPE2B-VAST.L350MM: RNCC: 3 | RNVC: 2

3 Nov 1988

5340-17-114-5371
Mounting Bracket

171145371
352233447840: RNCC: 3 | RNVC: 2
3522 334 47840: RNCC: 5 | RNVC: 2

11 Jan 2002

5340-17-049-4978
Spring Tension Clip

170494978
0173426: RNCC: 3 | RNVC: 2
173426: RNCC: 5 | RNVC: 9

5 Aug 1977

5340-17-105-9539
Mounting Bracket

171059539
352232505490: RNCC: 3 | RNVC: 2

30 Oct 1991

5340-17-103-4126
Cilinder Slot

171034126
SCR0065-F832: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-17-028-0462
Pin Assembly

170280462
4510-19-2700: RNCC: 3 | RNVC: 2

3 Feb 1975

5340-17-103-7208
Geleider

171037208
X10940-033: RNCC: 3 | RNVC: 2

2 Nov 1989

5340-17-107-7008
Mounting Bracket

171077008
2004042: RNCC: 3 | RNVC: 2

7 Dec 1993

5340-17-050-7122
Flush Lock

170507122
GSV2713GH2SLEUTELSF813: RNCC: 3 | RNVC: 2

2 May 1979

5340-17-103-0035
Druk Veer

171030035
99976003: RNCC: 3 | RNVC: 2
0066759: RNCC: 5 | RNVC: 2
066759: RNCC: 5 | RNVC: 9

11 Apr 1989

5340-17-118-1569
Sliding Door Hanger

171181569
S521F3310102: RNCC: 3 | RNVC: 2

14 Dec 2005

5340-17-123-5723
Mounting Plate

171235723
AFDEKPLAAT O2 SENOSOREN: RNCC: 3 | RNVC: 2

14 Feb 2011

5340-17-054-5189
Dust And Moisture Seal Protective Cap-Plug

170545189
5340 260: RNCC: 3 | RNVC: 2
4273 1107 00: RNCC: 5 | RNVC: 2

13 Jul 1983

5340-17-124-9897
Air Inlet-Outlet Frame

171249897
2515.1328: RNCC: 3 | RNVC: 2

23 Jul 2013

5340-17-114-6155
Mounting Plate

171146155
352232665320: RNCC: 3 | RNVC: 2

11 Feb 2002

5340-17-113-9537
Double Angle Bracket

171139537
169798: RNCC: 3 | RNVC: 2

12 Apr 2001

5340-17-114-4515
Bevestigings Bus

171144515
3737-3/6: RNCC: 3 | RNVC: 2

14 Nov 2001

5340-17-124-3155
Door Handle

171243155
010W184250.000.0: RNCC: 3 | RNVC: 2

23 Apr 2012

5340-17-049-8679
Plain Solid Disk

170498679
03-4-7016BL73P0S57: RNCC: 3 | RNVC: 2

31 Mar 1978

5340-17-110-8760
Retaining Strap

171108760
37010020: RNCC: 3 | RNVC: 2

6 May 1997

5340-17-053-6248
Drukring

170536248
352231020820: RNCC: 3 | RNVC: 2
VBN21A16: RNCC: 5 | RNVC: 2

26 Feb 1985

5340-17-034-5098
Nut And Bolt Locking Plate

170345098
5340-31: RNCC: 3 | RNVC: 2

19 Aug 1969

5340-17-120-5571
Access Cover

171205571
094B03000: RNCC: 3 | RNVC: 2
094B03000: RNCC: 5 | RNVC: 9

19 Jun 2007

5340-17-117-1855
Angle Bracket

171171855
352233674660: RNCC: 3 | RNVC: 2
3522 336 74660: RNCC: 5 | RNVC: 2

16 Dec 2004

5340-17-114-1932
Spacing Threaded Standoff

171141932
352232308720: RNCC: 3 | RNVC: 2

17 Jul 2001

5340-17-120-6869
Recht Handgreep

171206869
612-100-2510: RNCC: 3 | RNVC: 2

23 Aug 2007

5340-17-043-0689
Angle Bracket

170430689
PLINTH0EK: RNCC: 3 | RNVC: 2

11 Feb 1974

5340-17-116-3444
Opzetstuk

171163444
01110: RNCC: 3 | RNVC: 2

20 Jan 2004

5340-17-104-8321
Spacing Threaded Standoff

171048321
352233082470: RNCC: 3 | RNVC: 2

20 Nov 1990

5340-17-101-0718
Wagen Torpedo Dwars

171010718
1434.323BLAD1: RNCC: 3 | RNVC: 2

4 Nov 1986

5340-17-106-7332
Barrel Bolt

171067332
373228: RNCC: 3 | RNVC: 2

28 Oct 1992

Load More Results