What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Quick Release Plunger?

A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is a Mortise Latch?

A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.

What is a Flush Catch?

A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).

What is a Clamp Bolt Assembly?

A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.

What is a Retaining Band?

A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.

What is a Bow Handle?

A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.

What is a Recess Handle?

A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.

What is a Bail Handle?

A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.

What is a Double Angle Bracket?

A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

What is a Strap Fastener Loop?

A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.

What is a Webbing Strap?

A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.

What is a Spring Tension Clip?

A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.

Hardware, Commercial - Korea (KR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Korea (KR) - NCB is 37

Page 52 of 56

NSN Format for Hardware, Commercial
Codified by Korea

53	40	37	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Korea (KR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 19 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 59 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 32 Items
Holder,Loop 25 Items
Holder,Spring 36 Items
What is a Rod End Connector? 58 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 89 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is a Metal Grille? 15 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 15 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 145 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 25 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 20 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Thumb Latch? 14 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 16 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 11 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Sliding Door Track? 13 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorknob? 12 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Tee Hinge? 11 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 16 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is a Butt Hinge Leaf? 45 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Mending Plate? 21 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 30 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Dust And Moisture Seal Protective Cap? 98 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 116 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 34 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 53 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 97 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 14 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Nut And Bolt Retainer? 12 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is an Angle Bracket? 1486 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 10 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Loop Clamp? 304 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 53 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 26 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 45 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 13 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flush Catch? 10 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 26 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 76 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 234 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 10 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 44 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 255 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 11 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 95 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 116 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 36 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 472 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 49 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 14 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Window Retaining Plate? 35 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 114 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 57 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Helical Compression Spring Seat? 18 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 40 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 42 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 19 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Vent Plug? 29 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 1435 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Threaded Rod End? 80 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 11 Items
What is a Manual Control Handle? 127 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Lever Bracket? 37 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 33 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 254 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 4187 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Section Block Clamp? 134 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Beam Gripping Clamp? 13 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 2701 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Synchro Clamp? 57 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 118 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Threaded Standoff? 11 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 36 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 247 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 33 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Runner? 23 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Track Stop? 13 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 30 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Masking Plate? 18 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 318 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 48 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Sliding Block? 18 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 41 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 25 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Shimmy Damper? 13 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 124 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 21 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Resilient Mount Plate? 12 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 80 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 11 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 91 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Locking Stay? 13 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 26 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Aircraft Latch Hook? 19 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 55 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 52 of 56

5340-37-510-3380
Webbing Strap

375103380
81045614: RNCC: 2 | RNVC: 2
81045614: RNCC: 5 | RNVC: 9
81045614-01: RNCC: 5 | RNVC: 9

7 Jan 2004

5340-37-507-5425

5340-37-518-7153
Access Cover

375187153
60828032: RNCC: 3 | RNVC: 2
KDS 1230-4002: RNCC: 4 | RNVC: 1
60828032: RNCC: 5 | RNVC: 2

12 Oct 2009

5340-37-507-2455
Handle

375072455
20113673: RNCC: 5 | RNVC: 9
KM-0115-0013: RNCC: 5 | RNVC: 9

11 Aug 2000

5340-37-501-5545

5340-37-522-8123
Spring Holder

375228123
KTE-D1 - ITEM 7: RNCC: 3 | RNVC: 2

9 Mar 2012

5340-37-518-4776
Angle Bracket

375184776
WF533416-01: RNCC: 3 | RNVC: 2

4 Aug 2009

5340-37-505-4678
Unit Base B Slide B

375054678
Q55016139: RNCC: 3 | RNVC: 2

19 Jan 1999

5340-37-518-5696
Mounting Bracket

375185696
WF393125-01: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-37-510-3774
Synchro Clamp

375103774
Q65050130: RNCC: 3 | RNVC: 2

2 Feb 2004

5340-37-502-5500
Mounting Bracket

375025500
60078905: RNCC: 3 | RNVC: 2

3 Dec 1993

5340-37-507-3210
Vertical Flange

375073210
KDS 3950-3002: RNCC: 2 | RNVC: 1
95005966: RNCC: 3 | RNVC: 2
95005966: RNCC: 5 | RNVC: 2

30 Aug 2000

5340-37-518-4968
Mounting Bracket

375184968
60671534: RNCC: 3 | RNVC: 2
60671534-1: RNCC: 3 | RNVC: 2
60671534-1: RNCC: 5 | RNVC: 2

7 Aug 2009

5340-37-524-1106
Mounting Plate

375241106
D60838112-1: RNCC: 3 | RNVC: 2
D60838112: RNCC: D | RNVC: 9

13 Aug 2012

5340-37-518-7930
Friction Catch

375187930
60816114: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60816114: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-525-3820
Protection Cover

375253820
50168064: RNCC: 3 | RNVC: 2

22 Jan 2013

5340-37-526-1639
Mounting Plate

375261639
376-6926: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-37-521-5147
Retaining Clip

375215147
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81018372: RNCC: 3 | RNVC: 2
A81018372-01: RNCC: 5 | RNVC: 2

30 Jun 2011

5340-37-522-0857
Clamping Catch

375220857
KDS 1425-4001: RNCC: 2 | RNVC: 1
A80014987: RNCC: 3 | RNVC: 2
A80014987: RNCC: 5 | RNVC: 2

11 Nov 2011

5340-37-521-9237
Angle Bracket

375219237
KDS 2350-4003: RNCC: 2 | RNVC: 1
61528707: RNCC: 3 | RNVC: 2
61528707: RNCC: 5 | RNVC: 2

23 Sep 2011

5340-37-522-2975
Mounting Bracket

375222975
50137798-01: RNCC: 3 | RNVC: 2
50137798-01: RNCC: 5 | RNVC: 2
50137798: RNCC: D | RNVC: 9

15 Dec 2011

5340-37-514-0719
Cover

375140719
KDS 2320-4006: RNCC: 2 | RNVC: 1
A60017409: RNCC: 3 | RNVC: 2
A60017409: RNCC: 5 | RNVC: 2

18 Sep 2007

5340-37-505-8234
Dust And Moisture Seal Protective Cover

375058234
KDS 2350-1024: RNCC: 2 | RNVC: 1
60347354: RNCC: 3 | RNVC: 2

15 Jun 1999

5340-37-501-1071
Bridge Clamp

375011071
KDS 2590-1196: RNCC: 2 | RNVC: 1
60250184: RNCC: 5 | RNVC: 9
60250184: RNCC: 5 | RNVC: 9

20 Sep 1988

5340-37-524-0403
Mounting Bracket

375240403
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81063176-02: RNCC: 3 | RNVC: 2
A81063176-02: RNCC: 5 | RNVC: 2
A81063176: RNCC: D | RNVC: 9

8 Aug 2012

5340-37-502-6363
Retaining Strap

375026363
60058126: RNCC: 3 | RNVC: 2

24 Mar 1994

5340-37-005-4715
Ring Clutch Ay

370054715
KDC 3805-P0001: RNCC: 2 | RNVC: 1
5340-97-005-4715: RNCC: 2 | RNVC: 2
70639576: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-519-2198
Mounting Plate

375192198
81363246: RNCC: 3 | RNVC: 2
81363246: RNCC: 5 | RNVC: 2

9 Feb 2010

5340-37-523-6786
Support

375236786
A60079341: RNCC: 3 | RNVC: 2
A60079341: RNCC: 3 | RNVC: 2

13 Jul 2012

5340-37-518-7234
Mounting Bracket

375187234
Q55405402: RNCC: 3 | RNVC: 2
Q55405402: RNCC: 5 | RNVC: 2
20707309: RNCC: 5 | RNVC: 2

14 Oct 2009

5340-37-512-8624
Angle Bracket

375128624
Q25022728: RNCC: 3 | RNVC: 2
Q25022728: RNCC: 5 | RNVC: 2

24 Feb 2006

5340-37-512-9227
Rotary Assembly

375129227
Q25025280: RNCC: 3 | RNVC: 2
Q25025280: RNCC: 5 | RNVC: 2

15 Mar 2006

5340-37-502-5598
Manual Control Lever

375025598
60071263: RNCC: 3 | RNVC: 2

7 Dec 1993

5340-37-502-0780
Bow Handle

375020780
KDS 5805-1064: RNCC: 2 | RNVC: 1
50072578: RNCC: 3 | RNVC: 2
50072578: RNCC: 5 | RNVC: 9
50072578: RNCC: 5 | RNVC: 9

27 Nov 1991

5340-37-501-1518
Spring Tension Clip

375011518
60703131: RNCC: 3 | RNVC: 2
60703131: RNCC: 5 | RNVC: 2

10 Nov 1988

5340-37-511-6840
Angle Bracket

375116840
85Y6091-013: RNCC: 3 | RNVC: 2
85Y6091-013: RNCC: 5 | RNVC: 2

18 Mar 2005

5340-37-500-3196
Clamping Catch

375003196
KDC2350-P0001-16: RNCC: 2 | RNVC: 1
60641035: RNCC: 5 | RNVC: 9

19 May 1989

5340-37-523-5161
Dust And Moisture Seal Protective Cover

375235161
KDS 1285-1010: RNCC: 2 | RNVC: 1
Q55608013: RNCC: 3 | RNVC: 2
Q55608013: RNCC: 5 | RNVC: 2

21 Jun 2012

5340-37-525-1654
Mounting Bracket

375251654
91014571: RNCC: 3 | RNVC: 2
91014571: RNCC: 5 | RNVC: 2

9 Jan 2013

5340-37-523-9616
Multiple Angle Bracket

375239616
91037911: RNCC: 3 | RNVC: 2
91037911: RNCC: 5 | RNVC: 2

3 Aug 2012

5340-37-512-8750
Shaft

375128750
Q25022382: RNCC: 3 | RNVC: 2
Q25022382: RNCC: 5 | RNVC: 2

28 Feb 2006

5340-37-510-7047
Angle Bracket

375107047
70020511: RNCC: 3 | RNVC: 2
70020511: RNCC: 5 | RNVC: 2

1 May 2004

5340-37-513-1071
Capacitor Holder

375131071
80017236: RNCC: 3 | RNVC: 2
80017236: RNCC: 5 | RNVC: 2

12 Jul 2006

5340-37-501-3010
Retaining Strap

375013010
60734656: RNCC: 3 | RNVC: 2
60734656: RNCC: 5 | RNVC: 2

9 May 1989

5340-37-512-9519
Access Cover

375129519
Q25026567: RNCC: 3 | RNVC: 2
Q25026567: RNCC: 5 | RNVC: 2

24 Mar 2006

5340-37-510-3420
Angle Bracket

375103420
81046582: RNCC: 3 | RNVC: 2
81046582: RNCC: 5 | RNVC: 9

9 Jan 2004

5340-37-510-6277
Loop Holder

375106277
80077335: RNCC: 3 | RNVC: 1
80077335: RNCC: 3 | RNVC: 2

16 Apr 2004

5340-37-510-8391
Angle Bracket

375108391
Q65059877: RNCC: 3 | RNVC: 2
Q65059877: RNCC: 5 | RNVC: 2

4 Jul 2004

5340-37-510-3178
Stoper Bracket

375103178
Q55024829: RNCC: 3 | RNVC: 2
Q55024829: RNCC: 5 | RNVC: 2

26 Dec 2003

5340-37-519-8048
Mounting Plate

375198048
Q55607311: RNCC: 5 | RNVC: 2
Q55607311: RNCC: D | RNVC: 9

6 Aug 2010

5340-37-519-3084
Mounting Plate

375193084
81364501: RNCC: 3 | RNVC: 2
81364501: RNCC: 5 | RNVC: 2

10 Mar 2010

5340-37-524-5531
Mounting Bracket

375245531
91047252: RNCC: 3 | RNVC: 2
91047252: RNCC: 5 | RNVC: 2

25 Sep 2012

5340-37-503-9882
Housing

375039882
K-712: RNCC: 5 | RNVC: 2
10876204: RNCC: 5 | RNVC: 9
10876204: RNCC: 5 | RNVC: 9

8 Apr 1996

5340-37-504-0094
Tract Lock Assembly

375040094
3066-00950: RNCC: 3 | RNVC: 2

13 Apr 1996

5340-37-515-7409
Access Cover

375157409
KDS 2320-4009: RNCC: 2 | RNVC: 1
A60022279: RNCC: 3 | RNVC: 2
A60022279: RNCC: 5 | RNVC: 2

24 Sep 2008

5340-37-516-5133
Bow Handle

375165133
RD688SP: RNCC: 3 | RNVC: 2
RD688SP: RNCC: 5 | RNVC: 2

9 Dec 2008

5340-37-522-4864
Mounting Bracket

375224864
50140271: RNCC: 3 | RNVC: 2
50140271: RNCC: 5 | RNVC: 2

13 Jan 2012

5340-37-510-7055
Mounting Bracket

375107055
80074915: RNCC: 3 | RNVC: 1
80074915-1: RNCC: 5 | RNVC: 9

1 May 2004

5340-37-519-2443
Angle Bracket

375192443
599-M41086-00: RNCC: 5 | RNVC: 2
599-M41086: RNCC: D | RNVC: 9

19 Feb 2010

5340-37-516-4073
Loop Clamp

375164073
AL5: RNCC: 3 | RNVC: 2

21 Nov 2008

5340-37-501-4629
Bracket

375014629
60721076: RNCC: 3 | RNVC: 2
60721076: RNCC: 5 | RNVC: 2

22 Dec 1989

5340-37-518-9838
Supp Plate Assembly

375189838
61503465: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61503465: RNCC: 5 | RNVC: 2

4 Dec 2009

5340-37-519-3527
Angle Bracket

375193527
85PF6731-805: RNCC: 3 | RNVC: 2
85PF6731-805: RNCC: 5 | RNVC: 2

18 Mar 2010

5340-37-504-4240
Angle Bracket

375044240
61232684: RNCC: 5 | RNVC: 9
61232684: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-37-523-2693
Mounting Plate

375232693
50153017: RNCC: 3 | RNVC: 2
50153017: RNCC: 5 | RNVC: 2

23 May 2012

5340-37-526-1213
Mounting Plate

375261213
91026577: RNCC: 3 | RNVC: 2
91026577: RNCC: 5 | RNVC: 2

28 May 2013

5340-37-508-5110
Angle Bracket

375085110
Q65031575: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-37-511-0566
Mounting Bracket

375110566
Q25020713: RNCC: 3 | RNVC: 2
25020713: RNCC: 5 | RNVC: 2

8 Aug 2004

5340-37-505-7086
Mounting Bracket

375057086
Q45016071: RNCC: 3 | RNVC: 2

15 May 1999

5340-37-512-9018
Angle Bracket

375129018
Q25025699: RNCC: 3 | RNVC: 2
Q25025699: RNCC: 5 | RNVC: 2

9 Mar 2006

5340-37-522-4516
Mounting Bracket

375224516
50139123: RNCC: 3 | RNVC: 2
50139123: RNCC: 5 | RNVC: 2

6 Jan 2012

5340-37-519-2301
Access Cover

375192301
81363833: RNCC: 3 | RNVC: 2
81363833: RNCC: 5 | RNVC: 2

11 Feb 2010

5340-37-519-2292
Access Door Hinge

375192292
81363840: RNCC: 3 | RNVC: 2
81363840: RNCC: 5 | RNVC: 2

11 Feb 2010

5340-37-512-0794
Mounting Plate

375120794
50125760: RNCC: 3 | RNVC: 2
50125760: RNCC: 5 | RNVC: 2

9 Jun 2005

5340-37-515-9393
Padlock Set

375159393
60755210-2: RNCC: 3 | RNVC: 2
60755210-2: RNCC: 5 | RNVC: 2

17 Oct 2008

5340-37-524-6459
Access Door Hinge

375246459
B-863-3-R: RNCC: 3 | RNVC: 2

8 Oct 2012

5340-37-501-2144
Sliding Door Track

375012144
KDC2350-P0003-6: RNCC: 2 | RNVC: 1
60704841: RNCC: 3 | RNVC: 2
60704841: RNCC: 5 | RNVC: 2

12 Jan 1989

5340-37-526-1387
Upper Cover

375261387
A50051481: RNCC: 3 | RNVC: 2
A50051481: RNCC: 5 | RNVC: 2

30 May 2013

5340-37-526-1174
Mounting Plate

375261174
91026687: RNCC: 3 | RNVC: 2
91026687: RNCC: 5 | RNVC: 2

24 May 2013

5340-37-518-6877
Block Clamp

375186877
61523275: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61523275: RNCC: 5 | RNVC: 2

28 Sep 2009

5340-37-507-0530
Angle Bracket

375070530
60806012: RNCC: 5 | RNVC: 9
65.12540-0175: RNCC: 5 | RNVC: 9

10 Apr 2000

5340-37-523-6381
Mounting Bracket

375236381
A81026322-01: RNCC: 3 | RNVC: 2
A81026322-01: RNCC: 5 | RNVC: 2
A81026322: RNCC: D | RNVC: 9

9 Jul 2012

5340-37-514-7266
Mounting Bracket

375147266
50138739: RNCC: 3 | RNVC: 2
50138739: RNCC: 5 | RNVC: 2

26 Feb 2008

5340-37-516-0974
Air Filter

375160974
DSM193-339.0-405.0-45.0: RNCC: 3 | RNVC: 2
DSM193-339.0-405.0-45.0: RNCC: 5 | RNVC: 2

22 Oct 2008

5340-37-004-1763
Spring

370041763
KDS 4230-1001: RNCC: 2 | RNVC: 1
5340-97-004-1763: RNCC: 2 | RNVC: 2
4230-500-0000484: RNCC: 5 | RNVC: 9
4230-500-0000484: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-37-525-5754
Mounting Bracket

375255754
KDS 6675-4001: RNCC: 2 | RNVC: 1
50167887: RNCC: 3 | RNVC: 2
50167887: RNCC: 5 | RNVC: 2

14 Feb 2013

5340-37-525-6895
Blank Panel

375256895
A50041990: RNCC: 3 | RNVC: 2
A50041990: RNCC: 5 | RNVC: 2

4 Mar 2013

5340-37-523-7980
Window Retaining Plate

375237980
91034233: RNCC: 3 | RNVC: 2
91034233: RNCC: 5 | RNVC: 2

19 Jul 2012

5340-37-507-0379
Stand Base

375070379
95001739: RNCC: 3 | RNVC: 2

3 Apr 2000

5340-37-507-0052
Mounting Plate

375070052
95001686: RNCC: 3 | RNVC: 2

16 Mar 2000

5340-37-522-2404
Multiple Angle Bracket

375222404
A60082478-1: RNCC: 3 | RNVC: 2
A60082478-1: RNCC: 5 | RNVC: 2

1 Dec 2011

5340-37-501-8759
Door Handle

375018759
KDC2350-P0003-6: RNCC: 2 | RNVC: 1
60702528: RNCC: 3 | RNVC: 2
60702528: RNCC: 5 | RNVC: 2

22 May 1991

5340-37-524-9867
Access Cover

375249867
61527653: RNCC: 3 | RNVC: 2
61527653: RNCC: 5 | RNVC: 2

5 Dec 2012

5340-37-514-3726
Front Panel

375143726
50144395: RNCC: 3 | RNVC: 2
50144395: RNCC: 5 | RNVC: 2

26 Nov 2007

5340-37-508-8676
Right Large Jig

375088676
Q65038860: RNCC: 3 | RNVC: 2
Q65038940: RNCC: 3 | RNVC: 2

26 Apr 2002

5340-37-508-5107
Block Clamp

375085107
Q65027156: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-37-522-4772
Multiple Angle Bracket

375224772
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85Y9134-651: RNCC: 3 | RNVC: 2
85Y9134-651: RNCC: 5 | RNVC: 2

11 Jan 2012

5340-37-516-5053
Block Clamp

375165053
JOC-4N: RNCC: 3 | RNVC: 2
JOC-4N: RNCC: 5 | RNVC: 2

27 Nov 2008

5340-37-508-2410
Orifice

375082410
95007966: RNCC: 3 | RNVC: 2

16 Nov 2001

5340-37-520-3590
Access Cover

375203590
50156137: RNCC: 3 | RNVC: 2
50156137: RNCC: 5 | RNVC: 2

26 Nov 2010

5340-37-520-8861
Mounting Plate

375208861
Q55607966: RNCC: 3 | RNVC: 2
Q55607966: RNCC: 5 | RNVC: 2

24 Feb 2011

5340-37-527-2521
Retaining Band

375272521
81040705: RNCC: 3 | RNVC: 2
81040705: RNCC: 5 | RNVC: 2

22 Oct 2013

5340-37-514-7043
Loop Clamp

375147043
1.15.9999.145.005: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-37-510-7287
Latch

375107287
70018280: RNCC: 3 | RNVC: 1
70018280: RNCC: 3 | RNVC: 2

19 May 2004

5340-37-526-4532
Mounting Bracket

375264532
LC1000-2-M2: RNCC: 3 | RNVC: 2

23 Jul 2013

5340-37-526-4540
Mounting Bracket

375264540
LC1000-3-M2: RNCC: 3 | RNVC: 2

23 Jul 2013

5340-37-511-8149
Moun Plate Assembly

375118149
Q55111695: RNCC: 3 | RNVC: 2
Q55111695: RNCC: 5 | RNVC: 2

8 Apr 2005

5340-37-523-7725
Mounting Bracket As

375237725
A60081127: RNCC: 3 | RNVC: 2
A60081127: RNCC: 5 | RNVC: 2

18 Jul 2012

5340-37-513-3717
Snap-In Threaded Standoff

375133717
80044816: RNCC: 3 | RNVC: 2
80044816: RNCC: 5 | RNVC: 2

26 Dec 2006

5340-37-512-0437
Angle Bracket

375120437
85H1531-043: RNCC: 3 | RNVC: 2
85H1531-043: RNCC: 5 | RNVC: 2

3 Jun 2005

5340-37-507-1976
Access Cover

375071976
20107734: RNCC: 5 | RNVC: 9

13 Jul 2000

5340-37-515-0340
Angle Bracket

375150340
Q65021524-2: RNCC: 3 | RNVC: 2
Q65021524-2: RNCC: 5 | RNVC: 2

15 Apr 2008

5340-37-521-7008
Mounting Bracket

375217008
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81057323: RNCC: 3 | RNVC: 2
A81057323-01: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-37-523-7908
Angle Bracket

375237908
A60078692-1: RNCC: 3 | RNVC: 2
A60078692-1: RNCC: 5 | RNVC: 2
A60078692: RNCC: D | RNVC: 9

18 Jul 2012

5340-37-511-2837
Recharge Modu Plate

375112837
81046382: RNCC: 3 | RNVC: 2
81046382: RNCC: 5 | RNVC: 2

17 Oct 2004

5340-37-512-4965
Bow Handle

375124965
AD50000949: RNCC: 3 | RNVC: 2
AD50000949: RNCC: 5 | RNVC: 2

1 Sep 2005

5340-37-515-0769
Angle Bracket

375150769
Q55109221: RNCC: 3 | RNVC: 2
Q55109221: RNCC: 5 | RNVC: 2

23 Apr 2008

5340-37-521-8558
Angle Bracket

375218558
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81063436: RNCC: 3 | RNVC: 2
A81063436-01: RNCC: 5 | RNVC: 2

19 Sep 2011

5340-37-525-1833
Mounting Plate

375251833
91044742-02: RNCC: 3 | RNVC: 2
91044742-02: RNCC: 5 | RNVC: 2
91044742: RNCC: D | RNVC: 9

10 Jan 2013

5340-37-511-8963
Angle Bracket

375118963
85Y9132-009: RNCC: 3 | RNVC: 2
85Y9132-009: RNCC: 5 | RNVC: 2

28 Apr 2005

5340-37-511-7705
Lanyard-Ce Retainer

375117705
85S2315-013: RNCC: 3 | RNVC: 2
85S2315-013: RNCC: 5 | RNVC: 2

31 Mar 2005

5340-37-512-5038
Angle Bracket

375125038
Q65062695: RNCC: 3 | RNVC: 2
Q65062695: RNCC: 3 | RNVC: 2
Q65062695-2: RNCC: 3 | RNVC: 2

1 Sep 2005

5340-37-520-6452
Mounting Plate

375206452
A20017932: RNCC: 3 | RNVC: 2
A20017932: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-519-8551
Block Clamp

375198551
A20010714: RNCC: 3 | RNVC: 2
A20010714: RNCC: 5 | RNVC: 2

19 Aug 2010

5340-37-502-8237
Mounting Bracket

375028237
60089115: RNCC: 3 | RNVC: 2

18 Aug 1994

5340-37-512-8919
Latch Assembly

375128919
Q25025455: RNCC: 3 | RNVC: 2
Q25025455: RNCC: 5 | RNVC: 2

3 Mar 2006

5340-37-519-6558
Loop Clamp

375196558
A20008516: RNCC: 3 | RNVC: 2
A20008516: RNCC: 5 | RNVC: 2

23 Jun 2010

5340-37-519-6479
Mounting Bracket

375196479
10301.3006.004.002: RNCC: 3 | RNVC: 2

18 Jun 2010

5340-37-519-6187
Threaded Rod End

375196187
A20009231: RNCC: 3 | RNVC: 2
A20009231: RNCC: 5 | RNVC: 2

15 Jun 2010

5340-37-519-5723
Lever Bracket

375195723
A20011106: RNCC: 3 | RNVC: 2
A20011106: RNCC: 5 | RNVC: 2

4 Jun 2010

5340-37-521-6119
Mounting Plate

375216119
A60067158-2: RNCC: 3 | RNVC: 2
A60067158-2: RNCC: 5 | RNVC: 2
A60067158: RNCC: D | RNVC: 9

19 Jul 2011

5340-37-514-2769

5340-37-555-4538

5340-37-524-1637
Left Cable Cover

375241637
A60079190: RNCC: 3 | RNVC: 2
A60079190: RNCC: 5 | RNVC: 2

16 Aug 2012

5340-37-510-4894
Mounting Plate

375104894
80075363: RNCC: 5 | RNVC: 9

16 Mar 2004

5340-37-515-3626
Access Cover

375153626
91025700: RNCC: 3 | RNVC: 2
91025700: RNCC: 5 | RNVC: 2

11 Jun 2008

5340-37-514-8403
Strap Hinge

375148403
50139236: RNCC: 3 | RNVC: 2
50139236: RNCC: 5 | RNVC: 2

14 Mar 2008

5340-37-520-3260
Bow Handle

375203260
50156840: RNCC: 3 | RNVC: 2
50156840: RNCC: 5 | RNVC: 2

19 Nov 2010

5340-37-519-9895
Mounting Plate

375199895
A20013957: RNCC: 3 | RNVC: 2
A20013957: RNCC: 5 | RNVC: 2

10 Sep 2010

5340-37-557-2169
Bracket

375572169
C201300065: RNCC: 5 | RNVC: 1

16 Apr 2004

5340-37-520-3106
Access Cover

375203106
A60024157: RNCC: 3 | RNVC: 2
A60024157: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-37-515-2664
Dust And Moisture Seal Protective Plug

375152664
Q45022512: RNCC: 3 | RNVC: 2
Q45022512: RNCC: 5 | RNVC: 2

19 May 2008

5340-37-514-6747
Access Cover

375146747
A60021159: RNCC: 3 | RNVC: 2
A60021159: RNCC: 5 | RNVC: 2

5 Feb 2008

5340-37-515-7593
Mounting Bracket

375157593
83014415: RNCC: 3 | RNVC: 2
83014415: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-511-1272
Mounting Bracket

375111272
Q55606191: RNCC: 3 | RNVC: 2
Q55606191: RNCC: 5 | RNVC: 2

28 Aug 2004

5340-37-510-6952
Bow Handle

375106952
60575014: RNCC: 3 | RNVC: 2
60575014: RNCC: 5 | RNVC: 2
60575014: RNCC: 5 | RNVC: 2

1 May 2004

5340-37-522-4706
Lock Bar

375224706
50139779: RNCC: 3 | RNVC: 2
50139779: RNCC: 5 | RNVC: 2

11 Jan 2012

5340-37-519-1921
Snap-In Threaded Standoff

375191921
A80015082: RNCC: 3 | RNVC: 2
A80015082: RNCC: 5 | RNVC: 2

25 Jan 2010

5340-37-512-8427
Mounting Plate

375128427
Q25024892: RNCC: 3 | RNVC: 2
Q25024892: RNCC: 5 | RNVC: 2

17 Feb 2006

5340-37-518-8863
Mounting Plate

375188863
93015441: RNCC: 3 | RNVC: 2
93015441: RNCC: 5 | RNVC: 2

23 Nov 2009

5340-37-526-8952
Mounting Bracket

375268952
A81063146-01: RNCC: 3 | RNVC: 2
A81063146-01: RNCC: 5 | RNVC: 2
A81063146: RNCC: D | RNVC: 9

11 Sep 2013

5340-37-516-8244
Mounting Plate

375168244
60825706: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60825706: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-37-522-4153
Double Angle Bracket

375224153
KDC 1680-T4005: RNCC: 2 | RNVC: 1
A81025559: RNCC: 3 | RNVC: 2
A81025559-01: RNCC: 3 | RNVC: 2
A81025559-01: RNCC: 5 | RNVC: 2
A81025559-01: RNCC: 5 | RNVC: 2

28 Dec 2011

5340-37-132-0101
Cushion Assy

371320101
5340-97-132-0101: RNCC: 2 | RNVC: 2

23 Nov 1987

5340-37-511-4132
Moun Plate Assembly

375114132
Q55110793: RNCC: 3 | RNVC: 2
Q55110793: RNCC: 5 | RNVC: 2

18 Dec 2004

5340-37-524-6591
Access Cover

375246591
91042533: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-37-524-3988
Friction Catch

375243988
61533178: RNCC: 3 | RNVC: 2
61533178: RNCC: 5 | RNVC: 2

4 Sep 2012

5340-37-519-2769
Access Cover

375192769
81364308: RNCC: 3 | RNVC: 2
81364308: RNCC: 5 | RNVC: 2

3 Mar 2010

5340-37-501-6123
Access Cover

375016123
60734621: RNCC: 3 | RNVC: 2
60734621: RNCC: 5 | RNVC: 2

17 May 1990

5340-37-515-6151
Dust And Moisture Seal Protective Cover

375156151
BU43 2S.002: RNCC: 3 | RNVC: 2
BU43 2S.002: RNCC: 5 | RNVC: 2

31 Jul 2008

5340-37-523-4567
Link

375234567
A60078923-1: RNCC: 3 | RNVC: 2
A60078923-1: RNCC: 5 | RNVC: 2
A60078923: RNCC: D | RNVC: 9

13 Jun 2012

5340-37-524-0312
Angle Bracket

375240312
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81035101-03: RNCC: 3 | RNVC: 2
A81035101-03: RNCC: 5 | RNVC: 2
A81035101: RNCC: D | RNVC: 9

7 Aug 2012

5340-37-513-2049
Mounting Plate

375132049
60309165-1: RNCC: 3 | RNVC: 2
60309165: RNCC: 5 | RNVC: 1
60309165-1: RNCC: 5 | RNVC: 2

29 Sep 2006

5340-37-510-3498
Seal Retaining Plate

375103498
80044691: RNCC: 3 | RNVC: 2

12 Jan 2004

5340-37-510-7039
Angle Bracket

375107039
70020511: RNCC: 3 | RNVC: 2
70020512: RNCC: 5 | RNVC: 2

1 May 2004

5340-37-512-0822
Block Clamp

375120822
50125820: RNCC: 3 | RNVC: 2
50125820: RNCC: 5 | RNVC: 2

9 Jun 2005

5340-37-520-0204
Mounting Plate

375200204
A20013881: RNCC: 3 | RNVC: 2
A20013881: RNCC: 5 | RNVC: 2

24 Sep 2010

5340-37-510-2480
Mounting Plate

375102480
81046349: RNCC: 5 | RNVC: 9

9 Dec 2003

5340-37-516-0483
Shelf Bracket

375160483
91028229-03: RNCC: 3 | RNVC: 2
91028229-03: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-521-2783
Access Cover

375212783
KDS4230-4001: RNCC: 2 | RNVC: 1
Q75013052: RNCC: 3 | RNVC: 2
Q75013052: RNCC: 5 | RNVC: 2

11 May 2011

5340-37-522-0387
Mounting Bracket

375220387
KDS 2350-4003: RNCC: 2 | RNVC: 1
61507025: RNCC: 3 | RNVC: 2
61507025: RNCC: 5 | RNVC: 2

4 Nov 2011

5340-37-509-9511
Mounting Bracket

375099511
KDS 1510-4001: RNCC: 2 | RNVC: 1
82391217: RNCC: 5 | RNVC: 9
82391217-01: RNCC: 5 | RNVC: 9
82391217: RNCC: 5 | RNVC: 9
82391217-01: RNCC: 5 | RNVC: 9

7 Aug 2003

5340-37-521-6728
Angle Bracket

375216728
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81034141: RNCC: 3 | RNVC: 2
A81034141-01: RNCC: 5 | RNVC: 2

28 Jul 2011

5340-37-526-1636
Mounting Plate

375261636
378-0457: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-37-504-8264
Retaining Clip

375048264
KDS 2320-1023: RNCC: 2 | RNVC: 1
60381878: RNCC: 5 | RNVC: 9
60381878: RNCC: 5 | RNVC: 9

27 Oct 1997

5340-37-519-6137
Detent Plunger

375196137
A20009052: RNCC: 3 | RNVC: 2
A20009052: RNCC: 5 | RNVC: 2

15 Jun 2010

5340-37-516-0531
Connector Guard

375160531
Q65021319: RNCC: 3 | RNVC: 2
Q65021319: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-502-0446
Loop Clamp

375020446
60644137: RNCC: 5 | RNVC: 9

22 Oct 1991

5340-37-507-1593
Mounting Bracket

375071593
20112034: RNCC: 5 | RNVC: 9

19 Jun 2000

5340-37-510-3189
Thermostat Fixed

375103189
Q55024810: RNCC: 3 | RNVC: 2
Q55024810: RNCC: 5 | RNVC: 2

26 Dec 2003

5340-37-507-2670
Right Mount

375072670
20110540: RNCC: 5 | RNVC: 9

18 Aug 2000

5340-37-525-2825
Fan Filter

375252825
KDS 6930-4005: RNCC: 2 | RNVC: 1
61512624: RNCC: 3 | RNVC: 2
61512624: RNCC: 5 | RNVC: 2

16 Jan 2013

5340-37-005-4719
Clutch Ring

370054719
KDC 3805-P0001: RNCC: 2 | RNVC: 1
5340-97-005-4719: RNCC: 2 | RNVC: 2
70639585: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-526-5683
Access Cover

375265683
61505802: RNCC: 3 | RNVC: 2
61505802: RNCC: 5 | RNVC: 2

2 Aug 2013

5340-37-511-5480
Spacing Threaded Standoff

375115480
Q55024386: RNCC: 3 | RNVC: 2
Q55024386: RNCC: 5 | RNVC: 2

1 Feb 2005

5340-37-519-2948
Mounting Plate

375192948
81364033: RNCC: 3 | RNVC: 2
81364033: RNCC: 5 | RNVC: 2

8 Mar 2010

5340-37-511-1547
Cushioning Pad

375111547
20170887: RNCC: 3 | RNVC: 2
20170887: RNCC: 5 | RNVC: 2

3 Sep 2004

5340-37-511-2403
Ch Bracket Assembly

375112403
Q65080169: RNCC: 3 | RNVC: 2
Q65080169: RNCC: 5 | RNVC: 2

19 Sep 2004

5340-37-504-3279
Multiple Angle Bracket

375043279
50087662: RNCC: 5 | RNVC: 9

1 Sep 1996

5340-37-525-0172
Angle Bracket

375250172
91014373: RNCC: 3 | RNVC: 2
91014373: RNCC: 5 | RNVC: 2

10 Dec 2012

5340-37-523-7737
Access Cover

375237737
91042254: RNCC: 3 | RNVC: 2
91042254: RNCC: 5 | RNVC: 2

18 Jul 2012

5340-37-511-7069
St Support Assembly

375117069
Q85012039: RNCC: 3 | RNVC: 2
Q85012039: RNCC: 5 | RNVC: 2

23 Mar 2005

5340-37-524-3648
Mounting Plate

375243648
61527171: RNCC: 3 | RNVC: 2
61527171: RNCC: 5 | RNVC: 2

31 Aug 2012

5340-37-510-6837
Mounting Bracket

375106837
70019708: RNCC: 3 | RNVC: 2
70019708: RNCC: 5 | RNVC: 2

28 Apr 2004

5340-37-510-7116
Loop Clamp

375107116
60575205: RNCC: 3 | RNVC: 2
60575205: RNCC: 5 | RNVC: 2

5 May 2004

5340-37-519-3318
Front Guide

375193318
A20008107: RNCC: 3 | RNVC: 2
A20008107: RNCC: 5 | RNVC: 2

18 Mar 2010

5340-37-511-3833
Mounting Plate

375113833
20142184: RNCC: 3 | RNVC: 2
20142184: RNCC: 5 | RNVC: 2

30 Nov 2004

5340-37-519-3629
Detent Plunger

375193629
A20007988: RNCC: 3 | RNVC: 2
A20007988: RNCC: 5 | RNVC: 2

22 Mar 2010

5340-37-512-4090
Latch

375124090
Q25019927: RNCC: 3 | RNVC: 2
Q25019927: RNCC: 5 | RNVC: 2

10 Aug 2005

5340-37-510-2365
Tripod L Controller

375102365
40012481: RNCC: 5 | RNVC: 9

5 Dec 2003

5340-37-508-1767
Spring Cover

375081767
KDS 1005-1389: RNCC: 2 | RNVC: 1
20119238: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-37-505-7367
Mounting Bracket

375057367
KDS 1510-4001: RNCC: 2 | RNVC: 1
81273431: RNCC: 3 | RNVC: 2
81273431-01: RNCC: 5 | RNVC: 2

21 May 1999

5340-37-521-7297
Mounting Bracket

375217297
KDS1285-1010-2: RNCC: 2 | RNVC: 1
Q55609111: RNCC: 3 | RNVC: 2
Q55609111: RNCC: 5 | RNVC: 2

18 Aug 2011

5340-37-513-1003
Mounting Bracket

375131003
80017477-2: RNCC: 3 | RNVC: 2
80017477-2: RNCC: 5 | RNVC: 2

11 Jul 2006

5340-37-504-1214
Bow Handle

375041214
KDS 5820-1288: RNCC: 2 | RNVC: 1
50085536: RNCC: 3 | RNVC: 2

15 May 1996

5340-37-521-7040
Section Block Clamp

375217040
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81152102: RNCC: 3 | RNVC: 2
A81152102-01: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-37-508-8681
Left Belt Jig

375088681
KDS 2320-3005: RNCC: 2 | RNVC: 1
Q65038950: RNCC: 3 | RNVC: 2
Q65038950: RNCC: 3 | RNVC: 2

26 Apr 2002

5340-37-520-6636
Mounting Bracket

375206636
KDS 1005-1389: RNCC: 2 | RNVC: 1
Q55607335: RNCC: 3 | RNVC: 2
Q55607335: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-524-0876
Fixed Block

375240876
91039478: RNCC: 3 | RNVC: 2
91039478: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-524-1570
Stand

375241570
A60077202: RNCC: 3 | RNVC: 2
A60077202: RNCC: 5 | RNVC: 2

15 Aug 2012

5340-37-514-2231
Multiple Angle Bracket

375142231
KDS 1270-1002: RNCC: 2 | RNVC: 1
A90008260: RNCC: 3 | RNVC: 2
A90008260: RNCC: 5 | RNVC: 2

5 Nov 2007

5340-37-526-6327
Mounting Bracket

375266327
85E6511-603: RNCC: 5 | RNVC: 2
85E6511-603: RNCC: D | RNVC: 9

9 Aug 2013

5340-37-514-5589

5340-37-507-1530
Access Cover

375071530
20112513: RNCC: 5 | RNVC: 9

14 Jun 2000

5340-37-511-7780
Vibration Re Rubber

375117780
60406004: RNCC: 3 | RNVC: 2
60406004: RNCC: 5 | RNVC: 2

1 Apr 2005

5340-37-520-6024
Mounting Bracket

375206024
A20015727: RNCC: 3 | RNVC: 2
A20015727: RNCC: 5 | RNVC: 2

20 Dec 2010

5340-37-518-1874
Storage Chord Clip

375181874
1-2GOST16561-76: RNCC: 5 | RNVC: 1

23 Jul 2009

5340-37-512-9263
Guide

375129263
Q25027582: RNCC: 3 | RNVC: 2
Q25027582: RNCC: 5 | RNVC: 2

16 Mar 2006

5340-37-508-3129
Plate Assembly

375083129
Q65046338: RNCC: 3 | RNVC: 2
Q65046338: RNCC: 5 | RNVC: 2

29 Nov 2001

5340-37-505-4056
Butt Hinge Leaf

375054056
60309007: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-37-514-0262
Mounting Bracket

375140262
10301.7520.005: RNCC: 3 | RNVC: 2

5 Sep 2007

5340-37-524-9922
Mounting Bracket

375249922
61527266: RNCC: 3 | RNVC: 2
61527266: RNCC: 5 | RNVC: 2

5 Dec 2012

5340-37-522-9024
Access Door Hinge

375229024
60308825: RNCC: 3 | RNVC: 2
60308825: RNCC: 5 | RNVC: 2

30 Mar 2012

5340-37-506-5629
Mounting Bracket

375065629
KDS 1510-1003: RNCC: 2 | RNVC: 1
81761442: RNCC: 3 | RNVC: 2
81761442-01: RNCC: 3 | RNVC: 2

26 Oct 1999

5340-37-500-6412

5340-37-516-6555
Extension Handle

375166555
61500475: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61500475: RNCC: 5 | RNVC: 2

6 Feb 2009

5340-37-512-7147
Angle Bracket

375127147
85GA3219-019: RNCC: 3 | RNVC: 2
85GA3219-019: RNCC: 5 | RNVC: 2

10 Nov 2005

5340-37-521-9750
Mounting Plate

375219750
KDS 2350-4003: RNCC: 2 | RNVC: 1
61543650: RNCC: 3 | RNVC: 2
61543650: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-37-512-1678
Access Cover

375121678
85B6531-053: RNCC: 3 | RNVC: 2
85B6531-053: RNCC: 5 | RNVC: 2

24 Jun 2005

5340-37-518-5729
Angle Bracket

375185729
WF533311-01: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-37-510-8456
Loop Clamp

375108456
Q65059584: RNCC: 3 | RNVC: 2
Q65059584: RNCC: 5 | RNVC: 2

6 Jul 2004

5340-37-516-0282
Angle Bracket

375160282
60084829: RNCC: 3 | RNVC: 2
60084829: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-524-1575
Vent Plug

375241575
A60077077: RNCC: 3 | RNVC: 2
A60077077: RNCC: 5 | RNVC: 2

15 Aug 2012

5340-37-523-0627
Mounting Bracket

375230627
KDS 5895-4032: RNCC: 2 | RNVC: 1
50137797-02: RNCC: 3 | RNVC: 2
50137797-02: RNCC: 5 | RNVC: 2
50137797: RNCC: D | RNVC: 9

18 Apr 2012

5340-37-518-0860
Mounting Plate

375180860
60832713-3: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60832713: RNCC: 5 | RNVC: 1
60832713-3: RNCC: 5 | RNVC: 2

9 Jul 2009

5340-37-114-3357
Spring Tension Clip

371143357
KDC 2510-P0007: RNCC: 2 | RNVC: 1
60412071: RNCC: 3 | RNVC: 2
2520-97-114-3357: RNCC: 5 | RNVC: 9

8 Jul 1993

5340-37-524-1531
Dust And Moisture Seal Protective Cap

375241531
4M-033464: RNCC: 3 | RNVC: 2

14 Aug 2012

5340-37-502-2941
Angle Bracket

375022941
92009092: RNCC: 3 | RNVC: 2

6 Nov 1992

5340-37-507-1149
Mounting Bracket

375071149
20102140: RNCC: 5 | RNVC: 9

25 May 2000

5340-37-507-1756
Mounting Plate

375071756
20102042: RNCC: 5 | RNVC: 9

3 Jul 2000

5340-37-507-0966
Mounting Plate

375070966
20101123: RNCC: 5 | RNVC: 9

13 May 2000

5340-37-502-4981
Access Cover

375024981
60073461: RNCC: 3 | RNVC: 2

28 Sep 1993

5340-37-507-3410
Mounting Plate

375073410
Q55018921: RNCC: 3 | RNVC: 2

7 Sep 2000

5340-37-525-3595
Mounting Bracket

375253595
40024464: RNCC: 3 | RNVC: 2
40024464: RNCC: 5 | RNVC: 2

21 Jan 2013

5340-37-514-9854
Mounting Plate

375149854
50133731: RNCC: 3 | RNVC: 2
50133731: RNCC: 5 | RNVC: 2

8 Apr 2008

5340-37-524-7641
Push Door Plate

375247641
91034790: RNCC: 3 | RNVC: 2
91034790: RNCC: 5 | RNVC: 2

26 Oct 2012

5340-37-520-6263
Mounting Plate

375206263
A20017491: RNCC: 3 | RNVC: 2
A20017491: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-520-5960
Mechanical Stop

375205960
A20015544: RNCC: 3 | RNVC: 2
A20015544: RNCC: 5 | RNVC: 2

20 Dec 2010

5340-37-520-8858
Mounting Plate

375208858
Q55607866: RNCC: 3 | RNVC: 2
Q55607866: RNCC: 5 | RNVC: 2

24 Feb 2011

5340-37-520-3567
Mounting Bracket

375203567
50155974: RNCC: 3 | RNVC: 2
50155974: RNCC: 5 | RNVC: 2

26 Nov 2010

5340-37-512-8267
Mounting Bracket

375128267
Q25027098: RNCC: 3 | RNVC: 2
Q25027098: RNCC: 5 | RNVC: 2

14 Feb 2006

5340-37-511-6025
Filter Plate

375116025
95010109: RNCC: 3 | RNVC: 2
95010109: RNCC: 5 | RNVC: 9

28 Feb 2005

5340-37-512-8056
Out Cartridge Guide

375128056
Q25024759: RNCC: 3 | RNVC: 2
Q25024759: RNCC: 5 | RNVC: 2

3 Feb 2006

5340-37-512-8678
Mounting Plate

375128678
Q25024295: RNCC: 3 | RNVC: 2
Q25024295: RNCC: 5 | RNVC: 2

27 Feb 2006

5340-37-508-4963
Mounting Plate

375084963
Q65031072: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-37-509-0828
Mounting Bracket

375090828
Q65036939: RNCC: 3 | RNVC: 2
Q65036939: RNCC: 3 | RNVC: 2

26 Jul 2002

5340-37-504-2196
Base Plate

375042196
60647071: RNCC: 5 | RNVC: 9

23 Jul 1996

5340-37-504-7390
Retaining Band

375047390
50104226: RNCC: 3 | RNVC: 2

9 Sep 1997

5340-37-526-7022
Mounting Bracket

375267022
A90027331: RNCC: 3 | RNVC: 2
A90027331: RNCC: 5 | RNVC: 2

26 Aug 2013

5340-37-527-2836
Dust And Moisture Seal Protective Cap

375272836
LBTF6P19: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-37-516-2519
Mounting Plate

375162519
S30 4502 O: RNCC: 3 | RNVC: 2

6 Nov 2008

5340-37-510-3102
Connector Fixture P

375103102
81046409: RNCC: 5 | RNVC: 9

26 Dec 2003

5340-37-505-7508
Mounting Bracket

375057508
81291405: RNCC: 3 | RNVC: 2
81291405-01: RNCC: 5 | RNVC: 2

26 May 1999

5340-37-518-4667
Mounting Plate

375184667
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20012835: RNCC: 3 | RNVC: 2
A20012835: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-516-3907
Left Side Panel

375163907
91028177: RNCC: 3 | RNVC: 2
91028177: RNCC: 5 | RNVC: 2

18 Nov 2008

5340-37-523-8981
Access Cover

375238981
60823422: RNCC: 3 | RNVC: 2
60823422: RNCC: 5 | RNVC: 2

27 Jul 2012

5340-37-523-7071
Support

375237071
60822220: RNCC: 3 | RNVC: 2
60822220: RNCC: 5 | RNVC: 2

13 Jul 2012

5340-37-524-0125
Loop Clamp

375240125
60831912: RNCC: 3 | RNVC: 2
60831912: RNCC: 5 | RNVC: 2

7 Aug 2012

5340-37-524-0882
Support Block

375240882
91039486: RNCC: 3 | RNVC: 2
91039486: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-527-0245
Mounting Plate

375270245
81076715: RNCC: 3 | RNVC: 2
81076715: RNCC: 5 | RNVC: 2

8 Oct 2013

5340-37-502-8219
Support Assembly

375028219
60051332: RNCC: 3 | RNVC: 2

18 Aug 1994

5340-37-520-2254
Mounting Bracket

375202254
50155905: RNCC: 3 | RNVC: 2
50155905: RNCC: 5 | RNVC: 2

5 Nov 2010

5340-37-501-2156
Retaining Strap

375012156
60706037: RNCC: 3 | RNVC: 2
60706037: RNCC: 5 | RNVC: 2

13 Jan 1989

5340-37-519-5887
Rod End Clevis

375195887
A20008894: RNCC: 3 | RNVC: 2
A20008894: RNCC: 5 | RNVC: 2

10 Jun 2010

5340-37-114-1597
Return Spring

371141597
KDC 2510-P0007: RNCC: 2 | RNVC: 1
5340-97-114-1597: RNCC: 2 | RNVC: 2
63421230: RNCC: 3 | RNVC: 2
072744661: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-520-2876
Mounting Plate

375202876
50155818: RNCC: 3 | RNVC: 2
50155818: RNCC: 5 | RNVC: 2

15 Nov 2010

5340-37-526-1566
Mounting Plate

375261566
91027118: RNCC: 3 | RNVC: 2
91027118: RNCC: 5 | RNVC: 2

31 May 2013

5340-37-514-8692
Block Clamp

375148692
50144842: RNCC: 3 | RNVC: 2
50144842: RNCC: 5 | RNVC: 2

19 Mar 2008

5340-37-523-2254
Mounting Plate

375232254
A8003632101: RNCC: 3 | RNVC: 2
A8003632101: RNCC: 5 | RNVC: 2
A80036321: RNCC: D | RNVC: 9

18 May 2012

5340-37-514-9613
Mounting Bracket

375149613
50145302: RNCC: 3 | RNVC: 2
50145302: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-37-519-3024
Mounting Bracket

375193024
81365289: RNCC: 3 | RNVC: 2
81365289: RNCC: 5 | RNVC: 2

8 Mar 2010

5340-37-518-8834
Angle Bracket

375188834
93015437: RNCC: 3 | RNVC: 2
93015437: RNCC: 5 | RNVC: 2

23 Nov 2009

5340-37-519-3143
Block Clamp

375193143
81364902: RNCC: 3 | RNVC: 2
81364902: RNCC: 5 | RNVC: 2

10 Mar 2010

5340-37-524-1134
Catch Strike

375241134
D60815834: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-37-520-5992
Access Cover

375205992
A20015818: RNCC: 3 | RNVC: 2
A20015818: RNCC: 5 | RNVC: 2

20 Dec 2010

5340-37-555-0055
Section Block Clamp

375550055
60746110: RNCC: 3 | RNVC: 2
60746110: RNCC: 5 | RNVC: 2

30 May 1997

5340-37-527-1887
Mounting Plate

375271887
A50059528: RNCC: 3 | RNVC: 2
A50059528: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-37-505-6318
Cushioning Pad

375056318
KDS 2350-1024: RNCC: 2 | RNVC: 1
60359171: RNCC: 3 | RNVC: 2

13 Apr 1999

5340-37-526-7657
Mounting Bracket

375267657
AR210-0202-306: RNCC: 3 | RNVC: 2

29 Aug 2013

5340-37-511-7502
T Bracket

375117502
85L5186-303: RNCC: 3 | RNVC: 2
85L5186-303: RNCC: 5 | RNVC: 2

29 Mar 2005

5340-37-507-2446
Locking Block

375072446
20113641: RNCC: 5 | RNVC: 9

11 Aug 2000

5340-37-509-9989
Angle Bracket

375099989
82911402: RNCC: 3 | RNVC: 2
82911402-01: RNCC: 5 | RNVC: 2

18 Aug 2003

5340-37-522-6450
Mounting Bracket

375226450
50143596: RNCC: 3 | RNVC: 2
50143596: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-37-514-3382
Transfer Guid Block

375143382
Q25026615: RNCC: 3 | RNVC: 2
Q25026615: RNCC: 5 | RNVC: 2

21 Nov 2007

5340-37-516-8422
Mounting Plate

375168422
60817843: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60817843: RNCC: 5 | RNVC: 2

24 Mar 2009

5340-37-511-8416
Mounting Bracket

375118416
Q55111823: RNCC: 3 | RNVC: 2
Q55111823: RNCC: 5 | RNVC: 2

14 Apr 2005

5340-37-515-7537
Protective Shield Assembly

375157537
83014258: RNCC: 3 | RNVC: 2
83014258: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-513-3925
Casement Fastener

375133925
A60015876: RNCC: 3 | RNVC: 2
A60015876: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-37-517-6055
Bearing Cap

375176055
57170417: RNCC: 5 | RNVC: 1

22 Jun 2009

5340-37-513-4402
Angle Bracket

375134402
Q65025079: RNCC: 3 | RNVC: 2
Q65025078: RNCC: 5 | RNVC: 1
Q65025079: RNCC: 5 | RNVC: 2

26 Jan 2007

5340-37-513-2755
Mounting Bracket

375132755
A40000573: RNCC: 3 | RNVC: 2
A40000573: RNCC: 5 | RNVC: 2

14 Nov 2006

5340-37-510-6944
Multiple Angle Bracket

375106944
70019814: RNCC: 3 | RNVC: 2
70019814: RNCC: 5 | RNVC: 2

30 Apr 2004

5340-37-512-9146
Bracket Assembly

375129146
Q25025564: RNCC: 3 | RNVC: 2
Q25025564: RNCC: 5 | RNVC: 2

13 Mar 2006

5340-37-526-4537
Retaining Clip

375264537
Q65026687: RNCC: 3 | RNVC: 2
Q65026687: RNCC: 5 | RNVC: 2

23 Jul 2013

5340-37-519-3656
Mounting Plate

375193656
A20008049: RNCC: 3 | RNVC: 2
A20008049: RNCC: 5 | RNVC: 2

22 Mar 2010

5340-37-525-6557
Mounting Plate

375256557
310200713A: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-37-511-3621
Fl Protective Cover

375113621
40017005: RNCC: 3 | RNVC: 2
40017005: RNCC: 5 | RNVC: 2

20 Nov 2004

5340-37-512-8271
Angle Bracket

375128271
Q25023010: RNCC: 3 | RNVC: 2
Q25023010: RNCC: 5 | RNVC: 2

14 Feb 2006

5340-37-516-8222
Mounting Bracket

375168222
60817619: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60817619: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-37-517-9820
Nut And Bolt Retainer

375179820
WF272456-02: RNCC: 3 | RNVC: 2

2 Jul 2009

5340-37-516-7733
Mounting Bracket

375167733
60825304: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60825304: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-37-521-9534
Angle Bracket

375219534
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81506440-01: RNCC: 3 | RNVC: 2
A81506440-01: RNCC: 5 | RNVC: 2
A81506440: RNCC: D | RNVC: 9

11 Oct 2011

5340-37-522-5645
Mounting Plate

375225645
A82011451: RNCC: 3 | RNVC: 2
A82011451-01: RNCC: 3 | RNVC: 2
A82011451: RNCC: 5 | RNVC: 2

1 Feb 2012

5340-37-521-8335
Double Angle Bracket

375218335
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81061135: RNCC: 3 | RNVC: 2
A81061135-01: RNCC: 5 | RNVC: 2

15 Sep 2011

5340-37-505-9527
Threaded Rod End

375059527
KDS 2350-1024: RNCC: 2 | RNVC: 1
60349209: RNCC: 3 | RNVC: 2

16 Jul 1999

5340-37-522-2025
Mounting Plate

375222025
KDS 5895-4031: RNCC: 2 | RNVC: 1
50136653: RNCC: 3 | RNVC: 2
50136653: RNCC: 5 | RNVC: 2

28 Nov 2011

5340-37-556-5098
Clamp

375565098
S19100-01600: RNCC: 5 | RNVC: 1

31 Mar 2004

5340-37-520-4637
Mounting Plate

375204637
EXW-134-79-8-135-RED#1: RNCC: 3 | RNVC: 2

8 Dec 2010

5340-37-524-2818
Cable Mount Block

375242818
91038280: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-37-526-5767
Angle Bracket

375265767
91024608: RNCC: 3 | RNVC: 2
91024608: RNCC: 5 | RNVC: 2

5 Aug 2013

5340-37-513-6056
Thumb Latch

375136056
KDS 1240-4001: RNCC: 2 | RNVC: 1
A20006530: RNCC: 3 | RNVC: 2
A20006530: RNCC: 5 | RNVC: 2

17 Apr 2007

5340-37-521-9104
Access Cover

375219104
KDS 1240-4012: RNCC: 2 | RNVC: 1
A40011943: RNCC: 3 | RNVC: 2
A40011943: RNCC: 5 | RNVC: 2

22 Sep 2011

5340-37-505-1446
Rear Pannel

375051446
KDS5805-1074-3: RNCC: 2 | RNVC: 1
50106132: RNCC: 3 | RNVC: 2

12 May 1998

5340-37-518-6841
Access Cover

375186841
61523105: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61523105: RNCC: 5 | RNVC: 2

28 Sep 2009

5340-37-518-2504
Dust And Moisture Seal Protective Cap

375182504
20020-413: RNCC: 5 | RNVC: 2
20020-413: RNCC: 5 | RNVC: 2

23 Jul 2009

5340-37-518-0651
Mounting Bracket

375180651
WF263103-01: RNCC: 3 | RNVC: 2

7 Jul 2009

5340-37-517-4245
Cover

375174245
61531102: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61531102: RNCC: 5 | RNVC: 2

5 Jun 2009

5340-37-505-9074
Mounting Bracket

375059074
KDS 2350-1024: RNCC: 2 | RNVC: 1
60349092: RNCC: 3 | RNVC: 2

8 Jul 1999

5340-37-515-5925
Nut And Bolt Locking Plate

375155925
91007-07-045: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-37-524-2799
Left Panel

375242799
91038261: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-37-526-8786
Mounting Bracket

375268786
A90027115: RNCC: 3 | RNVC: 2
A90027115: RNCC: 5 | RNVC: 2

9 Sep 2013

5340-37-524-4945
Mounting Plate

375244945
60829461: RNCC: 3 | RNVC: 2

23 Sep 2012

5340-37-524-5991
Angle Bracket

375245991
60389205: RNCC: 3 | RNVC: 2
60389205: RNCC: 5 | RNVC: 2

27 Sep 2012

5340-37-517-7981
Mounting Bracket

375177981
WF212426-01: RNCC: 3 | RNVC: 2

29 Jun 2009

5340-37-521-0701
Spring Holder

375210701
A81016311: RNCC: 3 | RNVC: 2
A81016311-01: RNCC: 3 | RNVC: 2
A81016311-01: RNCC: 5 | RNVC: 2

1 Apr 2011

5340-37-520-8251
Mechanical Stop

375208251
A81666354-01: RNCC: 3 | RNVC: 2
A81666354: RNCC: 3 | RNVC: 2
A81666354-01: RNCC: 5 | RNVC: 2

14 Feb 2011

5340-37-525-2833
Mounting Bracket

375252833
KDS 6930-4005: RNCC: 2 | RNVC: 1
61512637: RNCC: 3 | RNVC: 2
61512637: RNCC: 5 | RNVC: 2

16 Jan 2013

5340-37-506-4706
Retaining Strap

375064706
KDS 2350-1024: RNCC: 2 | RNVC: 1
60340757: RNCC: 3 | RNVC: 2

17 Sep 1999

5340-37-518-0509
Block Clamp

375180509
60826141: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826141: RNCC: 5 | RNVC: 2

6 Jul 2009

5340-37-524-3577
Access Cover

375243577
61507824: RNCC: 3 | RNVC: 2
61507824: RNCC: 5 | RNVC: 2

31 Aug 2012

5340-37-522-8946
Mounting Plate

375228946
50138958: RNCC: 3 | RNVC: 2
50138958: RNCC: 5 | RNVC: 2

29 Mar 2012

5340-37-526-8256
Access Cover

375268256
81076264: RNCC: 3 | RNVC: 2
81076264: RNCC: 5 | RNVC: 2

4 Sep 2013

5340-37-515-2761
Mounting Bracket

375152761
50141366: RNCC: 3 | RNVC: 2
50141366: RNCC: 5 | RNVC: 2

20 May 2008

5340-37-500-7674
Clamping Catch

375007674
KDS 1005-1327: RNCC: 2 | RNVC: 1
60025884: RNCC: 5 | RNVC: 9
2350-1007: RNCC: 5 | RNVC: 9

15 Jun 1989

5340-37-516-8572
Mounting Bracket

375168572
80095171: RNCC: 3 | RNVC: 2
80095171: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-512-9450
Mounting Plate

375129450
Q25022405: RNCC: 3 | RNVC: 2
Q25022405: RNCC: 5 | RNVC: 2

21 Mar 2006

5340-37-517-8022
Mounting Plate

375178022
60824980: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60824980: RNCC: 5 | RNVC: 2

29 Jun 2009

5340-37-521-0557
Mounting Bracket

375210557
A80027018: RNCC: 3 | RNVC: 2
A80027018-01: RNCC: 3 | RNVC: 2
A80027018-01: RNCC: 5 | RNVC: 2

30 Mar 2011

5340-37-519-1320
Mounting Bracket

375191320
WF533449-01: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-505-9536
Retaining Strap

375059536
KDS 2350-1024: RNCC: 2 | RNVC: 1
60348008: RNCC: 3 | RNVC: 2
60348008-2: RNCC: 3 | RNVC: 2

16 Jul 1999

5340-37-132-1809
Clip Hose

371321809
5340-97-132-1809: RNCC: 2 | RNVC: 2
B31-13-0900: RNCC: 3 | RNVC: 2
KDS 2320-1006: RNCC: 4 | RNVC: 1

23 Nov 1987

5340-37-518-6799
Mounting Bracket

375186799
60822864: RNCC: 3 | RNVC: 2
KDS 1240-4004: RNCC: 4 | RNVC: 1
60822864: RNCC: 5 | RNVC: 2

24 Sep 2009

5340-37-511-2326
Lh Holder Assembly

375112326
60020965: RNCC: 3 | RNVC: 2
60020968: RNCC: 5 | RNVC: 2

17 Sep 2004

5340-37-507-8654
Mounting Bracket

375078654
80261930: RNCC: 3 | RNVC: 2
80261930: RNCC: 5 | RNVC: 2

19 Jun 2001

5340-37-508-5828
Mounting Bracket

375085828
Q65034405: RNCC: 3 | RNVC: 2

7 Feb 2002

5340-37-512-0093
Angle Bracket

375120093
20170165: RNCC: 3 | RNVC: 2
20170165: RNCC: 5 | RNVC: 2

27 May 2005

5340-37-511-7758
Access Cover

375117758
95014382: RNCC: 3 | RNVC: 2
95014382: RNCC: 5 | RNVC: 2

1 Apr 2005

5340-37-523-0906
Mounting Bracket

375230906
65.12303-0010: RNCC: 3 | RNVC: 2
83026247: RNCC: D | RNVC: 9

24 Apr 2012

5340-37-520-1485
Mounting Bracket

375201485
A80026057-01: RNCC: 3 | RNVC: 2
A80026057-01: RNCC: 5 | RNVC: 2
A80026057: RNCC: D | RNVC: 9

21 Oct 2010

5340-37-518-5547
Angle Bracket

375185547
WF537862-01: RNCC: 3 | RNVC: 2

17 Aug 2009

5340-37-526-4886
Angle Bracket

375264886
A81062396-01: RNCC: 5 | RNVC: 2
A81062396: RNCC: D | RNVC: 9

24 Jul 2013

5340-37-521-9086
Mounting Bracket

375219086
KDS 1240-4012: RNCC: 2 | RNVC: 1
A40011851: RNCC: 3 | RNVC: 2
A40011851: RNCC: 5 | RNVC: 2

22 Sep 2011

5340-37-525-5882
Stand Base

375255882
83045787: RNCC: 3 | RNVC: 2

14 Feb 2013

5340-37-525-4767
Mounting Bracket

375254767
91045237: RNCC: 3 | RNVC: 2
91045237: RNCC: 5 | RNVC: 2

31 Jan 2013

5340-37-511-7787
Head Lamp Protector

375117787
60424053: RNCC: 3 | RNVC: 2
60424053: RNCC: 5 | RNVC: 2

1 Apr 2005

5340-37-512-0762
Mounting Plate

375120762
50125603: RNCC: 3 | RNVC: 2
50125603: RNCC: 5 | RNVC: 2

9 Jun 2005

5340-37-525-5845
Stand Base

375255845
83045666: RNCC: 3 | RNVC: 2

14 Feb 2013

5340-37-515-6222
Access Cover

375156222
91029564: RNCC: 3 | RNVC: 2
91029564: RNCC: 5 | RNVC: 2

1 Aug 2008

5340-37-515-0040
Multiple Angle Bracket

375150040
50133749: RNCC: 3 | RNVC: 2
50133749: RNCC: 5 | RNVC: 2

10 Apr 2008

5340-37-520-8430
Window Retaining Plate

375208430
KDS 1230-4003: RNCC: 2 | RNVC: 1
60828620: RNCC: 3 | RNVC: 2
60828620: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-37-502-0012
Access Cover

375020012
KDS 5820-1264: RNCC: 2 | RNVC: 1
50073861: RNCC: 3 | RNVC: 2

19 Sep 1991

5340-37-520-0445
Mounting Bracket

375200445
KDS-1015-4003: RNCC: 2 | RNVC: 2
A20013536: RNCC: 3 | RNVC: 2
A20013536: RNCC: 5 | RNVC: 2

27 Sep 2010

5340-37-517-6539
Mounting Bracket

375176539
61520102: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61520102: RNCC: 5 | RNVC: 2

24 Jun 2009

5340-37-516-5525
Lock-Release Lever

375165525
20030200: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030200: RNCC: 5 | RNVC: 2

22 Dec 2008

5340-37-042-0325
Ring Backward Clutc

370420325
73062026: RNCC: 3 | RNVC: 2
5340-97-042-0325: RNCC: 3 | RNVC: 2
73062026: RNCC: 3 | RNVC: 2

29 Apr 1992

5340-37-500-3010
Angle Bracket

375003010
KDC2350-P0001-16: RNCC: 2 | RNVC: 1
2350-1004: RNCC: 5 | RNVC: 9
60605005: RNCC: 5 | RNVC: 9
60605005: RNCC: 5 | RNVC: 9

21 Jun 1989

5340-37-006-5120
Washer

370065120
5340-97-006-5120: RNCC: 2 | RNVC: 2
8112902-0025: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-512-3444
Multiple Angle Bracket

375123444
85D1265-071: RNCC: 3 | RNVC: 2
85D1265-071: RNCC: 5 | RNVC: 2

28 Jul 2005

5340-37-520-3708
Angle Bracket

375203708
85T4720-007: RNCC: 3 | RNVC: 2
85T4720-007: RNCC: 5 | RNVC: 2

29 Nov 2010

5340-37-512-8554
Angle Bracket

375128554
Q25022283-1: RNCC: 3 | RNVC: 2
Q25022283: RNCC: 5 | RNVC: 1
Q25022283-1: RNCC: 5 | RNVC: 2

23 Feb 2006

5340-37-132-1021
B Strap Assy

371321021
5340-97-132-1021: RNCC: 2 | RNVC: 2
5305314: RNCC: 3 | RNVC: 2
KDS 2320-1006: RNCC: 4 | RNVC: 1

23 Nov 1987

5340-37-519-3474
Mounting Bracket

375193474
85P6762-803: RNCC: 3 | RNVC: 2
85P6762-803: RNCC: 5 | RNVC: 2

18 Mar 2010

5340-37-523-2964
Access Door Locking Ring

375232964
FA-114-1L: RNCC: 3 | RNVC: 2

25 May 2012

5340-37-510-3235
Mounting Plate

375103235
81046617: RNCC: 5 | RNVC: 9

29 Dec 2003

5340-37-520-1262
Angle Bracket

375201262
85B1877-035: RNCC: 3 | RNVC: 2
85B1877-035: RNCC: 5 | RNVC: 2

12 Oct 2010

5340-37-516-8250
Assembly Evacuator

375168250
60817630: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60817630: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-37-504-8826
Mounting Bracket

375048826
KDS 2320-1023: RNCC: 2 | RNVC: 1
60379392: RNCC: 5 | RNVC: 9
60379392: RNCC: 5 | RNVC: 9

11 Nov 1997

5340-37-511-9008
Angle Bracket

375119008
85K1508-003: RNCC: 3 | RNVC: 2
85K1508-003: RNCC: 5 | RNVC: 2

29 Apr 2005

5340-37-507-7374
Mounting Bracket

375077374
Q55601829: RNCC: 5 | RNVC: 9

17 Mar 2001

5340-37-502-5999
Section Block Clamp

375025999
60060190: RNCC: 3 | RNVC: 2

28 Feb 1994

5340-37-527-0490
Mounting Plate

375270490
A50046755: RNCC: 3 | RNVC: 2
A50046755: RNCC: 5 | RNVC: 2

8 Oct 2013

5340-37-511-1768
Fixed Panel1

375111768
Q25019485: RNCC: 3 | RNVC: 2
Q25019485: RNCC: 5 | RNVC: 2

7 Sep 2004

5340-37-513-3911
Mounting Plate

375133911
A90007724: RNCC: 3 | RNVC: 2
A90007724: RNCC: 5 | RNVC: 2

16 Jan 2007

5340-37-512-9232
Mounting Plate

375129232
Q25027532: RNCC: 3 | RNVC: 2
Q25027532: RNCC: 5 | RNVC: 2

15 Mar 2006

5340-37-515-7579
Hoisting Link

375157579
83014387: RNCC: 3 | RNVC: 2
83014387: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-524-2024
Bumper

375242024
A60079311: RNCC: 3 | RNVC: 2
A60079311: RNCC: 5 | RNVC: 2

20 Aug 2012

5340-37-503-0176
Angle Bracket

375030176
KDS 1290-1082: RNCC: 2 | RNVC: 1
40007043: RNCC: 5 | RNVC: 9

7 Nov 1994

5340-37-526-0640
Mounting Plate

375260640
KDS 5880-4001: RNCC: 2 | RNVC: 2
A60034934: RNCC: 5 | RNVC: 2
A60034934: RNCC: D | RNVC: 9

26 Apr 2013

5340-37-557-1769
Frame-3

375571769
F50001107: RNCC: 5 | RNVC: 1

14 Apr 2004

5340-37-513-2528
Mounting Bracket

375132528
A40000648: RNCC: 3 | RNVC: 2
A40000648: RNCC: 5 | RNVC: 2

25 Oct 2006

5340-37-526-0102
Mounting Plate

375260102
KDS 2350-4008: RNCC: 2 | RNVC: 2
A60075372: RNCC: 5 | RNVC: 2

9 Apr 2013

5340-37-521-0405
Mounting Bracket

375210405
A81009514-01: RNCC: 3 | RNVC: 2
A81009514-01: RNCC: 5 | RNVC: 2
A81009514: RNCC: D | RNVC: 9

29 Mar 2011

5340-37-521-7047
Bumper

375217047
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81152309: RNCC: 3 | RNVC: 2
A81152309-01: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-37-526-0133
Spacing Threaded Standoff

375260133
KDS 2350-4008: RNCC: 2 | RNVC: 2
A60075426-2: RNCC: 5 | RNVC: 2

11 Apr 2013

5340-37-515-3113
Shaft Support

375153113
SLSBFA7-84: RNCC: 3 | RNVC: 2
SLSBFA7-84: RNCC: 5 | RNVC: 2

2 Jun 2008

5340-37-522-2358
Mounting Plate

375222358
KDS 1510-4002: RNCC: 2 | RNVC: 1
85D7150-421: RNCC: 3 | RNVC: 2
85D7150-421: RNCC: 5 | RNVC: 2

30 Nov 2011

5340-37-033-0573
Coolant O-Ring

370330573
5340-97-033-0573: RNCC: 2 | RNVC: 2
14457681: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-524-1050
Door Grip Assembly

375241050
A60077314-2: RNCC: 3 | RNVC: 2
A60077314-2: RNCC: 5 | RNVC: 2

13 Aug 2012

5340-37-504-3331
Plate

375043331
50096098: RNCC: 5 | RNVC: 9

3 Sep 1996

5340-37-500-6630
Bow Handle

375006630
80015455: RNCC: 3 | RNVC: 2

5 Apr 1989

5340-37-510-0901
Mounting Bracket

375100901
81043491: RNCC: 5 | RNVC: 9
81043491: RNCC: 5 | RNVC: 9

18 Sep 2003

5340-37-510-5884
Dust And Moisture Seal Protective Cap

375105884
60231086: RNCC: 3 | RNVC: 1
60231086: RNCC: 3 | RNVC: 2

9 Apr 2004

5340-37-512-8069
Center Guide

375128069
Q25024842: RNCC: 3 | RNVC: 2
Q25024842: RNCC: 5 | RNVC: 2

3 Feb 2006

5340-37-526-7742
Access Cover

375267742
AR212-1105-106: RNCC: 3 | RNVC: 2

30 Aug 2013

5340-37-503-6235
Connector Rod Beari

375036235
KDS 2350-1017: RNCC: 2 | RNVC: 1
60630642: RNCC: 5 | RNVC: 9
65.02410-0200: RNCC: 5 | RNVC: 9

24 Nov 1995

5340-37-506-5527
Multiple Angle Bracket

375065527
KDS 1510-1003: RNCC: 2 | RNVC: 1
81761307: RNCC: 3 | RNVC: 2
81761307-01: RNCC: 3 | RNVC: 2

25 Oct 1999

5340-37-505-7898
Retaining Strap

375057898
KDS 2350-1024: RNCC: 2 | RNVC: 1
60359098: RNCC: 3 | RNVC: 2

7 Jun 1999

5340-37-522-4778
Retaining Clip

375224778
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85F7721-614: RNCC: 3 | RNVC: 2
85F7721-614: RNCC: 5 | RNVC: 2
85F7721-613: RNCC: D | RNVC: 9

11 Jan 2012

5340-37-521-6312
Catch Strike

375216312
61480577-1: RNCC: 3 | RNVC: 2
61480577-1: RNCC: 5 | RNVC: 2
61480577: RNCC: D | RNVC: 9

21 Jul 2011

5340-37-520-0422
Mounting Plate

375200422
KDS-1015-4003: RNCC: 2 | RNVC: 2
A20013175: RNCC: 3 | RNVC: 2
A20013175: RNCC: 5 | RNVC: 2

27 Sep 2010

5340-37-130-1074
Brake Link

371301074
KG0144104: RNCC: 3 | RNVC: 2
601 21 017: RNCC: 5 | RNVC: 9
5340-97-130-1074: RNCC: 5 | RNVC: 9
601 21 017: RNCC: 5 | RNVC: 9
5340-97-130-1074: RNCC: 5 | RNVC: 9

28 Nov 1989

5340-37-522-2851
Mounting Plate

375222851
KDS 2350-4003: RNCC: 2 | RNVC: 1
61507459: RNCC: 3 | RNVC: 2
61507459: RNCC: 5 | RNVC: 2

9 Dec 2011

5340-37-511-5916
Angle Bracket

375115916
85PF9152-201: RNCC: 3 | RNVC: 2
85PF9152-201: RNCC: 5 | RNVC: 2

21 Feb 2005

5340-37-516-5318
Mounting Bracket

375165318
20030093: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030093: RNCC: 5 | RNVC: 2

16 Dec 2008

5340-37-517-3357
Mounting Plate

375173357
A60022565: RNCC: 3 | RNVC: 2
A60022565: RNCC: 5 | RNVC: 2

3 Jun 2009

5340-37-522-4106
Mounting Plate

375224106
50138371: RNCC: 3 | RNVC: 2
50138371: RNCC: 5 | RNVC: 2

27 Dec 2011

5340-37-517-7126
Mounting Bracket

375177126
60821784: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60821784: RNCC: 5 | RNVC: 2

26 Jun 2009

5340-37-161-1493
Bumper

371611493
5340-97-161-1493: RNCC: 2 | RNVC: 2
A60003002: RNCC: 3 | RNVC: 2
KDS-2330-1006: RNCC: 4 | RNVC: 1

23 Nov 1987

5340-37-521-1203
Lever Bracket

375211203
35-66481-0301: RNCC: 3 | RNVC: 2

18 Apr 2011

5340-37-520-0894
Angle Bracket

375200894
KDS 1510-4002: RNCC: 2 | RNVC: 1
85B1871-015: RNCC: 3 | RNVC: 2
85B1871-015: RNCC: 5 | RNVC: 2

30 Sep 2010

5340-37-503-6102
Retaining Band

375036102
KDS 2350-1009: RNCC: 2 | RNVC: 1
60630555: RNCC: 5 | RNVC: 9
65.97460-0001: RNCC: 5 | RNVC: 9

18 Jan 1996

5340-37-525-2762
Cushioning Pad

375252762
61508785-3: RNCC: 3 | RNVC: 2
61508785-3: RNCC: 5 | RNVC: 2
61508785: RNCC: D | RNVC: 9

15 Jan 2013

5340-37-522-8211
Mounting Bracket

375228211
KDS 5895-4032: RNCC: 2 | RNVC: 1
50139721: RNCC: 3 | RNVC: 2
50139721: RNCC: 5 | RNVC: 2

13 Mar 2012

5340-37-518-4744
Manual Control Lever

375184744
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20007194: RNCC: 3 | RNVC: 2
A20007194: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-521-0801
Bumper

375210801
A81016371: RNCC: 3 | RNVC: 2
A81016371-01: RNCC: 3 | RNVC: 2
A81016371-01: RNCC: 5 | RNVC: 2

5 Apr 2011

5340-37-526-1217
Mounting Bracket

375261217
91026168-01: RNCC: 3 | RNVC: 2
91026168-01: RNCC: 5 | RNVC: 2
91026168: RNCC: D | RNVC: 9

28 May 2013

5340-37-521-3228
Access Cover

375213228
KDS4230-4001: RNCC: 2 | RNVC: 1
Q75013005: RNCC: 3 | RNVC: 2
Q75013005: RNCC: 5 | RNVC: 2

16 May 2011

5340-37-506-4790
Angle Bracket

375064790
81911401: RNCC: 5 | RNVC: 9
81911401-01: RNCC: 5 | RNVC: 9

18 Sep 1999

5340-37-521-4245
Mounting Bracket

375214245
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81005111-01: RNCC: 3 | RNVC: 2
A81005111-01: RNCC: 5 | RNVC: 2
A81005111: RNCC: D | RNVC: 9

17 Jun 2011

5340-37-506-0366
Angle Bracket

375060366
KDS 1510-1003: RNCC: 2 | RNVC: 1
81531443-01: RNCC: 3 | RNVC: 2
81531443: RNCC: 3 | RNVC: 2

31 Jul 1999

5340-37-514-3514
Bow Handle

375143514
50134195-7: RNCC: 3 | RNVC: 2
50134195-7: RNCC: 5 | RNVC: 2

22 Nov 2007

5340-37-525-2093
Mounting Bracket

375252093
91046601-E8-1: RNCC: 3 | RNVC: 2
91046601-E8-1: RNCC: 5 | RNVC: 2
91046601-E8: RNCC: D | RNVC: 9

10 Jan 2013

5340-37-504-7879
Mounting Bracket

375047879
KDS 2320-1023: RNCC: 2 | RNVC: 1
60380113: RNCC: 5 | RNVC: 9
60380113: RNCC: 5 | RNVC: 9

11 Oct 1997

5340-37-525-7232
Angle Bracket

375257232
TSF-VMAR04-20HW: RNCC: 3 | RNVC: 2

8 Mar 2013

5340-37-517-9279
Angle Bracket Set

375179279
WF272125-01: RNCC: 3 | RNVC: 2

1 Jul 2009

5340-37-556-0631
Torque Control Coup

375560631
24147-9810: RNCC: 5 | RNVC: 1

22 Mar 2004

5340-37-520-6266
Mounting Bracket

375206266
A20017495: RNCC: 3 | RNVC: 2
A20017495: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-521-8665
Mounting Bracket

375218665
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81240115: RNCC: 3 | RNVC: 2
A81240115-01: RNCC: 5 | RNVC: 2

20 Sep 2011

5340-37-511-7685
Angle Bracket

375117685
85K1210-003: RNCC: 3 | RNVC: 2
85K1210-003: RNCC: 5 | RNVC: 2

31 Mar 2005

5340-37-520-5484
Access Cover

375205484
A60026497: RNCC: 3 | RNVC: 2
A60026497: RNCC: 5 | RNVC: 2

13 Dec 2010

5340-37-521-8663
Double Angle Bracket

375218663
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81240113: RNCC: 3 | RNVC: 2
A81240113-01: RNCC: 5 | RNVC: 2

20 Sep 2011

5340-37-505-7436
Dust And Moisture Seal Protective Cover

375057436
KDS 2350-1024: RNCC: 2 | RNVC: 1
60348639: RNCC: 3 | RNVC: 2

25 May 1999

Load More Results