What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Quick Release Plunger?

A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is a Mortise Latch?

A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.

What is a Flush Catch?

A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).

What is a Clamp Bolt Assembly?

A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.

What is a Retaining Band?

A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.

What is a Bow Handle?

A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.

What is a Recess Handle?

A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.

What is a Bail Handle?

A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.

What is a Double Angle Bracket?

A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

What is a Strap Fastener Loop?

A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.

What is a Webbing Strap?

A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.

What is a Spring Tension Clip?

A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.

Hardware, Commercial - Korea (KR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Korea (KR) - NCB is 37

Page 50 of 56

NSN Format for Hardware, Commercial
Codified by Korea

53	40	37	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Korea (KR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 19 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 59 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 32 Items
Holder,Loop 25 Items
Holder,Spring 36 Items
What is a Rod End Connector? 58 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 89 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is a Metal Grille? 15 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 15 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 145 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 25 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 20 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Thumb Latch? 14 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 16 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 11 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Sliding Door Track? 13 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorknob? 12 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Tee Hinge? 11 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 16 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is a Butt Hinge Leaf? 45 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Mending Plate? 21 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 30 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Dust And Moisture Seal Protective Cap? 98 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 116 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 34 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 53 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 97 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 14 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Nut And Bolt Retainer? 12 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is an Angle Bracket? 1486 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 10 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Loop Clamp? 304 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 53 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 26 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 45 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 13 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flush Catch? 10 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 26 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 76 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 234 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 10 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 44 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 255 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 11 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 95 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 116 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 36 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 472 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 49 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 14 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Window Retaining Plate? 35 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 114 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 57 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Helical Compression Spring Seat? 18 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 40 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 42 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 19 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Vent Plug? 29 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 1435 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Threaded Rod End? 80 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 11 Items
What is a Manual Control Handle? 127 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Lever Bracket? 37 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 33 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 254 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 4187 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Section Block Clamp? 134 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Beam Gripping Clamp? 13 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 2701 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Synchro Clamp? 57 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 118 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Threaded Standoff? 11 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 36 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 247 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 33 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Runner? 23 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Track Stop? 13 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 30 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Masking Plate? 18 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 318 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 48 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Sliding Block? 18 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 41 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 25 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Shimmy Damper? 13 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 124 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 21 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Resilient Mount Plate? 12 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 80 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 11 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 91 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Locking Stay? 13 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 26 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Aircraft Latch Hook? 19 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 55 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 50 of 56

5340-37-506-0489
Carge Cartridge Cla

375060489
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341405: RNCC: 3 | RNVC: 2

31 Jul 1999

5340-37-511-7550
Angle Bracket

375117550
85PF9531-203: RNCC: 3 | RNVC: 2
85PF9531-203: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-37-160-7568

5340-37-525-1834
Mounting Plate

375251834
91044743: RNCC: 3 | RNVC: 2
91044743: RNCC: 5 | RNVC: 2

10 Jan 2013

5340-37-509-1888
Mounting Bracket

375091888
80262407: RNCC: 3 | RNVC: 2
80262407: RNCC: 5 | RNVC: 2

5 Sep 2002

5340-37-507-3761
Cushioning Pad

375073761
60336801: RNCC: 3 | RNVC: 2
60336801: RNCC: 5 | RNVC: 2

21 Sep 2000

5340-37-520-2802
Cheek

375202802
10301.6514.021: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-37-519-0027
Mounting Plate

375190027
60835045: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60835045: RNCC: 5 | RNVC: 2

9 Dec 2009

5340-37-509-0046
Fender Strip

375090046
19-14-03: RNCC: 3 | RNVC: 2
37136194: RNCC: 3 | RNVC: 2

27 Jun 2002

5340-37-525-5881
Cushioning Pad

375255881
83045795-01: RNCC: 3 | RNVC: 2

14 Feb 2013

5340-37-501-9533
Plain Solid Disk

375019533
KDS 1010-1246: RNCC: 2 | RNVC: 1
20024443: RNCC: 3 | RNVC: 2

5 Aug 1991

5340-37-556-5066
Frame Plate

375565066
154-30-12310: RNCC: 5 | RNVC: 1

31 Mar 2004

5340-37-521-6648
Double Angle Bracket

375216648
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81026102: RNCC: 3 | RNVC: 2
A81026102-01: RNCC: 5 | RNVC: 2

28 Jul 2011

5340-37-521-2668
Mounting Bracket

375212668
KDS 2350-4003: RNCC: 2 | RNVC: 1
61523416: RNCC: 3 | RNVC: 2
61523416: RNCC: 5 | RNVC: 2

6 May 2011

5340-37-512-2520
Angle Bracket

375122520
85K1201-003: RNCC: 3 | RNVC: 2
85K1201-003: RNCC: 3 | RNVC: 2

12 Jul 2005

5340-37-507-1366
Access Cover

375071366
6115-3001: RNCC: 2 | RNVC: 9
Q55019110: RNCC: 3 | RNVC: 9

5 Jun 2000

5340-37-505-6918
Mounting Bracket

375056918
Q45015922: RNCC: 3 | RNVC: 2

11 May 1999

5340-37-505-0371
Angle Bracket

375050371
60087526: RNCC: 3 | RNVC: 2
60087526: RNCC: 5 | RNVC: 2

25 Feb 1998

5340-37-512-3945

5340-37-503-1106

5340-37-512-2907

5340-37-518-7881
Mounting Bracket

375187881
60815815: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60815815: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-511-7155
Multiple Angle Bracket

375117155
85P9114-003: RNCC: 3 | RNVC: 2
85P9114-003: RNCC: 5 | RNVC: 2

23 Mar 2005

5340-37-507-5431
Mounting Bracket

375075431
D00195-240050: RNCC: 5 | RNVC: 9

13 Dec 2000

5340-37-522-3867
Mounting Bracket

375223867
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85D9221-603: RNCC: 3 | RNVC: 2
85D9221-603: RNCC: 5 | RNVC: 2

23 Dec 2011

5340-37-130-2818
Loop Clamp

371302818
5340-97-130-2818: RNCC: 2 | RNVC: 2
60117041: RNCC: 3 | RNVC: 2
601 17 041: RNCC: 5 | RNVC: 9
KG01 40 040A: RNCC: 5 | RNVC: 9
2320-1004: RNCC: 5 | RNVC: 9
601 17 041: RNCC: 5 | RNVC: 9
KG01 40 040A: RNCC: 5 | RNVC: 9

12 Dec 1991

5340-37-516-1229
Access Cover

375161229
Q25025182: RNCC: 3 | RNVC: 2
Q25025182: RNCC: 5 | RNVC: 2

22 Oct 2008

5340-37-507-5136
Dust And Moisture Seal Protective Cap

375075136
60791151: RNCC: 3 | RNVC: 2
60791151: RNCC: 5 | RNVC: 2

25 Nov 2000

5340-37-130-2819
Rh Clamp

371302819
5340-97-130-2819: RNCC: 5 | RNVC: 9

4 Feb 2004

5340-37-522-9293
Detent Plunger

375229293
A80048616: RNCC: 3 | RNVC: 2
KDC 1005-T4001: RNCC: 4 | RNVC: 1
A80048616-01: RNCC: 5 | RNVC: 2

3 Apr 2012

5340-37-130-1603
Nonmetallic Grommet

371301603
KG0154549: RNCC: 3 | RNVC: 2
60125164: RNCC: 5 | RNVC: 9
2320-1004: RNCC: 5 | RNVC: 9
60125164: RNCC: 5 | RNVC: 9

24 Oct 1989

5340-37-520-6635
Mounting Plate

375206635
KDS 1005-1389: RNCC: 2 | RNVC: 1
Q55607143: RNCC: 3 | RNVC: 2
Q55607143: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-515-7413
Access Cover

375157413
KDS 2320-4009: RNCC: 2 | RNVC: 1
A60022392: RNCC: 3 | RNVC: 2
A60022392: RNCC: 5 | RNVC: 2

24 Sep 2008

5340-37-134-2402
Lock Ring

371342402
5340-97-134-2402: RNCC: 2 | RNVC: 2
4616288: RNCC: 3 | RNVC: 2
4616288: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-160-3144
Ring Oil Filter

371603144
5340-97-160-3144: RNCC: 2 | RNVC: 2
65.05901-0002: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-522-1922
Aircraft Latch Hook

375221922
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81506119-02: RNCC: 3 | RNVC: 2
A81506119-02: RNCC: 5 | RNVC: 2
A81506119: RNCC: D | RNVC: 9

23 Nov 2011

5340-37-522-5376
Angle Bracket

375225376
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85E1347-611: RNCC: 3 | RNVC: 2
85E1347-611: RNCC: 5 | RNVC: 2

27 Jan 2012

5340-37-505-1465
Bow Handle

375051465
KDS5805-1074-3: RNCC: 2 | RNVC: 1
50105953: RNCC: 3 | RNVC: 2
50105953-1: RNCC: 3 | RNVC: 2

14 May 1998

5340-37-527-0693
Mounting Plate

375270693
81079222-2: RNCC: 3 | RNVC: 2
81079222-2: RNCC: 5 | RNVC: 2
81079222: RNCC: D | RNVC: 9

11 Oct 2013

5340-37-524-3097
Mounting Bracket

375243097
D60839903: RNCC: 3 | RNVC: 2

28 Aug 2012

5340-37-525-1228
Rim Lock

375251228
ASR111000: RNCC: 3 | RNVC: 2

4 Jan 2013

5340-37-513-4403
Angle Bracket

375134403
Q65025081: RNCC: 3 | RNVC: 2
Q65025081: RNCC: 5 | RNVC: 2

26 Jan 2007

5340-37-511-1775
Fixed Panel5

375111775
Q25019492: RNCC: 3 | RNVC: 2
Q25019492: RNCC: 5 | RNVC: 2

7 Sep 2004

5340-37-502-6042
Protective Cover

375026042
60060230: RNCC: 3 | RNVC: 2

4 Mar 1994

5340-37-516-1228
Guid Plate Assembly

375161228
Q25025628: RNCC: 3 | RNVC: 2
Q25025628: RNCC: 5 | RNVC: 2

22 Oct 2008

5340-37-514-1168
Mounting Plate

375141168
Q55027730: RNCC: 3 | RNVC: 2
Q55027730: RNCC: 5 | RNVC: 2

5 Oct 2007

5340-37-005-6645

5340-37-005-5296

5340-37-520-2593
Mounting Plate

375202593
50156938: RNCC: 3 | RNVC: 2
50156938: RNCC: 5 | RNVC: 2

10 Nov 2010

5340-37-520-6992
Bumper

375206992
A20008172: RNCC: 5 | RNVC: 2
A20008172: RNCC: D | RNVC: 9

23 Jan 2011

5340-37-520-5358
Mounting Bracket

375205358
A20015703: RNCC: 3 | RNVC: 2
A20015703: RNCC: 5 | RNVC: 2

13 Dec 2010

5340-37-524-7565
Mounting Bracket

375247565
N51008362: RNCC: 3 | RNVC: 2
N51008362: RNCC: 5 | RNVC: 2

25 Oct 2012

5340-37-521-0408
Mounting Bracket

375210408
A81009516: RNCC: 3 | RNVC: 2
A81009516-01: RNCC: 3 | RNVC: 2
A81009516-01: RNCC: 5 | RNVC: 2

29 Mar 2011

5340-37-033-0921
Ring

370330921
71004778: RNCC: 3 | RNVC: 2
5340-37-033-0921: RNCC: 3 | RNVC: 2

11 Mar 1995

5340-37-524-2638
Mounting Bracket

375242638
KDS584530111: RNCC: 2 | RNVC: 1
A50038869-02: RNCC: 3 | RNVC: 2
A50038869-02: RNCC: 5 | RNVC: 2
A50038869: RNCC: D | RNVC: 9

24 Aug 2012

5340-37-510-9849
Mounting Bracket

375109849
Q55606928: RNCC: 3 | RNVC: 1
Q55606928: RNCC: 5 | RNVC: 9

24 Jul 2004

5340-37-507-2099
Mounting Plate

375072099
20120182: RNCC: 3 | RNVC: 2
20120182: RNCC: 5 | RNVC: 2

25 Jul 2000

5340-37-400-7059

5340-37-555-0116
Section Block Clamp

375550116
60746057: RNCC: 3 | RNVC: 2
60746057: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-37-509-4016
Cover

375094016
KDS 2350-1008: RNCC: 2 | RNVC: 1
60642622: RNCC: 3 | RNVC: 2
60642622: RNCC: 3 | RNVC: 2
5340-37-A13-5550: RNCC: 5 | RNVC: 2

3 Dec 2002

5340-37-517-6071
Regulator Assembly

375176071
007946-001: RNCC: 5 | RNVC: 1

22 Jun 2009

5340-37-521-4231
Mounting Bracket

375214231
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81004376: RNCC: 3 | RNVC: 2
A81004376-01: RNCC: 5 | RNVC: 2

16 Jun 2011

5340-37-517-4222
Access Cover

375174222
61533837: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61533837: RNCC: 5 | RNVC: 2

5 Jun 2009

5340-37-516-5252
Mounting Bracket

375165252
20030072: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030072: RNCC: 5 | RNVC: 2

11 Dec 2008

5340-37-504-1008
Loop Clamp

375041008
KDS 1210-4005: RNCC: 2 | RNVC: 1
50085243: RNCC: 3 | RNVC: 2
50085243-1: RNCC: 3 | RNVC: 2
50106235: RNCC: 3 | RNVC: 2
DA-2N: RNCC: 5 | RNVC: 2
DA-2N: RNCC: 5 | RNVC: 2
DA-2N: RNCC: 5 | RNVC: 2
82035217: RNCC: 5 | RNVC: 9
DA-2N: RNCC: 5 | RNVC: 9
82035217: RNCC: 5 | RNVC: 9

11 May 1996

5340-37-513-0127
Mounting Bracket

375130127
Q25026092-2: RNCC: 3 | RNVC: 2
Q25026092-2: RNCC: 5 | RNVC: 1
Q25026092: RNCC: 5 | RNVC: 2

24 Apr 2006

5340-37-512-6969
Dust And Moisture Seal Protective Cover

375126969
60125209: RNCC: 3 | RNVC: 2
60125209: RNCC: 3 | RNVC: 2

28 Oct 2005

5340-37-519-2806
Mounting Bracket

375192806
81364298: RNCC: 3 | RNVC: 2
81364298: RNCC: 5 | RNVC: 2

5 Mar 2010

5340-37-516-1053

5340-37-519-1288
Mechanical Stop

375191288
82534436-02: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-526-7565
Cushioning Pad

375267565
KDS 2350-4003: RNCC: 2 | RNVC: 2
61517033: RNCC: 5 | RNVC: 2
61517033: RNCC: D | RNVC: 9

28 Aug 2013

5340-37-518-5581
Mounting Plate

375185581
WF537926-01: RNCC: 3 | RNVC: 2

17 Aug 2009

5340-37-522-5818
Angle Bracket

375225818
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85Y9134-611: RNCC: 3 | RNVC: 2
85Y9134-611: RNCC: 5 | RNVC: 2

2 Feb 2012

5340-37-502-5950
Access Cover

375025950
60057261: RNCC: 3 | RNVC: 2
60057261: RNCC: 5 | RNVC: 2

22 Feb 1994

5340-37-515-7469
Angle Bracket

375157469
83014108: RNCC: 3 | RNVC: 2
83014108: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-507-0140
Mounting Bracket

375070140
95001745: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-37-515-7602
Block Clamp

375157602
83014428: RNCC: 3 | RNVC: 2
83014428: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-519-6579
Lever Bracket

375196579
A20012534: RNCC: 3 | RNVC: 2
A20012534: RNCC: 5 | RNVC: 2

23 Jun 2010

5340-37-520-1683
Section Block Clamp

375201683
A60025576: RNCC: 3 | RNVC: 2
A60025576: RNCC: 5 | RNVC: 2

25 Oct 2010

5340-37-519-2243
Mounting Bracket

375192243
81364709: RNCC: 3 | RNVC: 2
81364709: RNCC: 5 | RNVC: 2

11 Feb 2010

5340-37-526-3017
Access Cover

375263017
3M-158085: RNCC: 3 | RNVC: 2
3M-158085-T05: RNCC: 5 | RNVC: 2

1 Jul 2013

5340-37-522-2110
Angle Bracket

375222110
KDS 5895-4031: RNCC: 2 | RNVC: 1
50136727-1: RNCC: 3 | RNVC: 2
50136727-1: RNCC: 5 | RNVC: 2
50136727: RNCC: D | RNVC: 9

28 Nov 2011

5340-37-507-8653
Angle Bracket

375078653
80261481: RNCC: 3 | RNVC: 2
80261481: RNCC: 5 | RNVC: 2

19 Jun 2001

5340-37-502-4974
Cushioning Pad

375024974
60078243: RNCC: 3 | RNVC: 2
60078240: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-37-515-9415
Mounting Bracket

375159415
A40001295: RNCC: 3 | RNVC: 2
A40001295: RNCC: 5 | RNVC: 2

17 Oct 2008

5340-37-505-1592

5340-37-515-7594
Mounting Plate

375157594
83014416: RNCC: 3 | RNVC: 2
83014416: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-507-4147
Torsion Dog

375074147
60333025: RNCC: 3 | RNVC: 2
60333025: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-37-508-5713
Dust And Moisture Seal Protective Plug

375085713
Q65034649: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-37-524-4989
Mounting Bracket

375244989
60830532: RNCC: 3 | RNVC: 2

24 Sep 2012

5340-37-507-4259
Access Cover

375074259
60324801: RNCC: 3 | RNVC: 2
60324801: RNCC: 5 | RNVC: 2

9 Oct 2000

5340-37-515-7493
Mounting Plate

375157493
83014172: RNCC: 3 | RNVC: 2
83014172: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-524-3070
Mounting Bracket

375243070
D60839373: RNCC: 3 | RNVC: 2

28 Aug 2012

5340-37-502-7687
Mounting Plate

375027687
60085418: RNCC: 3 | RNVC: 2

15 Jun 1994

5340-37-505-4333
Mounting Plate

375054333
KDS 2320-1004: RNCC: 2 | RNVC: 1
61232866: RNCC: 5 | RNVC: 9
61232866: RNCC: 5 | RNVC: 9

4 Dec 1998

5340-37-506-4835
Mount

375064835
KDS 2350-1024: RNCC: 2 | RNVC: 1
60360002: RNCC: 3 | RNVC: 2

21 Sep 1999

5340-37-518-0517
Mounting Bracket

375180517
60822131: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60822131: RNCC: 5 | RNVC: 2

6 Jul 2009

5340-37-512-0084
Bow Handle

375120084
20170041: RNCC: 3 | RNVC: 2
20170041-03: RNCC: 5 | RNVC: 1
20170041-03: RNCC: 5 | RNVC: 2

27 May 2005

5340-37-518-5951
Mounting Plate

375185951
WF537393-01: RNCC: 3 | RNVC: 2

24 Aug 2009

5340-37-500-4771

5340-37-500-4207

5340-37-500-4432

5340-37-522-6513
Handle Grip

375226513
A82011940: RNCC: 3 | RNVC: 2
A82011940: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-37-519-7430
Stand Base

375197430
60311638: RNCC: 3 | RNVC: 2
60311638: RNCC: 5 | RNVC: 2

13 Jul 2010

5340-37-521-3776
Block Clamp

375213776
KDS2350-4005: RNCC: 2 | RNVC: 1
A60072121: RNCC: 3 | RNVC: 2
A60072121: RNCC: 5 | RNVC: 2

31 May 2011

5340-37-506-1188
Detent Plunger

375061188
KDS 1025-1150: RNCC: 2 | RNVC: 1
20026789: RNCC: 3 | RNVC: 2

9 Aug 1999

5340-37-526-6289
Mounting Plate

375266289
85D3361-671: RNCC: 5 | RNVC: 2
85D3361-671: RNCC: D | RNVC: 9

9 Aug 2013

5340-37-527-1492
Swivel Caster

375271492
BYLC-60F: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-37-504-6191
Cushioning Pad

375046191
60044390: RNCC: 3 | RNVC: 2
60044390: RNCC: 5 | RNVC: 2

26 Apr 1997

5340-37-502-3242

5340-37-511-1531
Bow Handle

375111531
20170041: RNCC: 3 | RNVC: 2
20170041-02: RNCC: 5 | RNVC: 2

3 Sep 2004

5340-37-512-3712
Mounting Bracket

375123712
85D2360-073: RNCC: 3 | RNVC: 2
85D2360-073: RNCC: 5 | RNVC: 2

29 Jul 2005

5340-37-522-0045
Mounting Bracket

375220045
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81016110-01: RNCC: 3 | RNVC: 2
A81016110-01: RNCC: 5 | RNVC: 2
A81016110: RNCC: D | RNVC: 9

1 Nov 2011

5340-37-514-1694
Support Plate

375141694
50138185: RNCC: 3 | RNVC: 2
50138185: RNCC: 5 | RNVC: 2

17 Oct 2007

5340-37-501-8470
Detent Plunger

375018470
60616604: RNCC: 5 | RNVC: 9

16 Apr 1991

5340-37-523-8634
Mounting Bracket

375238634
A60079407: RNCC: 3 | RNVC: 2
A60079407: RNCC: 5 | RNVC: 2

24 Jul 2012

5340-37-525-4845
Mounting Bracket

375254845
91044951: RNCC: 3 | RNVC: 2
91044951: RNCC: 5 | RNVC: 2

31 Jan 2013

5340-37-513-6351
Lock Bolt

375136351
80018510: RNCC: 3 | RNVC: 2
80018510: RNCC: 5 | RNVC: 2

30 Apr 2007

5340-37-524-9450
Angle Bracket

375249450
310200445A-02: RNCC: 3 | RNVC: 2
310200445A: RNCC: D | RNVC: 9

29 Nov 2012

5340-37-503-3574

5340-37-508-6975
Block Clamp

375086975
Q65047245: RNCC: 3 | RNVC: 2
Q65047245: RNCC: 5 | RNVC: 2

14 Mar 2002

5340-37-514-9606
Mounting Plate

375149606
91025781: RNCC: 3 | RNVC: 2
91025781: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-37-516-3076
Mounting Bracket

375163076
83031361: RNCC: 3 | RNVC: 2
83031361: RNCC: 5 | RNVC: 2

12 Nov 2008

5340-37-520-6243
Mounting Bracket

375206243
A20017459: RNCC: 3 | RNVC: 2
A20017459: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-160-3148
Seal Ring

371603148
KDC2350-P0001-16: RNCC: 2 | RNVC: 1
5340-97-160-3148: RNCC: 2 | RNVC: 2
06.56190-0705: RNCC: 3 | RNVC: 2
06.56190-0705: RNCC: 5 | RNVC: 2

23 Nov 1987

5340-37-521-9282
Mounting Bracket

375219282
KDS 2350-4003: RNCC: 2 | RNVC: 1
61508661: RNCC: 3 | RNVC: 2
61508661: RNCC: 5 | RNVC: 2

26 Sep 2011

5340-37-518-1373
Access Cover

375181373
60824100: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60824100: RNCC: 5 | RNVC: 2

21 Jul 2009

5340-37-524-2256
Cushioning Pad

375242256
A40008298-1: RNCC: 3 | RNVC: 2
A40008298-1: RNCC: 5 | RNVC: 2
A40008298: RNCC: D | RNVC: 9

22 Aug 2012

5340-37-519-4405
Mounting Plate

375194405
81363754-1: RNCC: 3 | RNVC: 2
81363754-1: RNCC: 5 | RNVC: 2
81363754: RNCC: D | RNVC: 9

16 Apr 2010

5340-37-520-3770
Angle Bracket

375203770
85T7371-133: RNCC: 3 | RNVC: 2
85T7371-133: RNCC: 5 | RNVC: 2

30 Nov 2010

5340-37-005-4267
Battery Cable Clip

370054267
KDC 3805-P0001: RNCC: 2 | RNVC: 1
5340-97-005-4267: RNCC: 2 | RNVC: 2
70094422: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-505-7897
Retaining Strap

375057897
KDS 2350-1024: RNCC: 2 | RNVC: 1
60359097: RNCC: 3 | RNVC: 2

7 Jun 1999

5340-37-523-5838
Cushioning Pad

375235838
61507223: RNCC: 5 | RNVC: 2

2 Jul 2012

5340-37-524-4726
Mounting Plate

375244726
60818311: RNCC: 3 | RNVC: 2

20 Sep 2012

5340-37-502-6002
Section Block Clamp

375026002
60057224: RNCC: 3 | RNVC: 2

28 Feb 1994

5340-37-524-1188
Bow Handle

375241188
D60838036: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-37-516-5150
Linear-Rotary Motion Roller

375165150
CF 3A: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-37-516-2296
Access Door Assembl

375162296
83000480: RNCC: 3 | RNVC: 2
83000480: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-37-513-8076
Headless Straight Rod

375138076
10301.5301.000: RNCC: 3 | RNVC: 2

2 Jul 2007

5340-37-518-0681
Threaded Rod End

375180681
60821860-2: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60821860: RNCC: 5 | RNVC: 1
60821860-2: RNCC: 5 | RNVC: 2
JM 14 L: RNCC: 5 | RNVC: 2

8 Jul 2009

5340-37-514-9716
Mounting Bracket

375149716
50140389: RNCC: 3 | RNVC: 2
50140389: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-37-526-0265
A6 Cover Block

375260265
91040317: RNCC: 3 | RNVC: 2
91040317: RNCC: 5 | RNVC: 2

15 Apr 2013

5340-37-519-2919
Mounting Bracket

375192919
81363862: RNCC: 3 | RNVC: 2
81363862: RNCC: 5 | RNVC: 2

8 Mar 2010

5340-37-511-2331
Li Bracket Assembly

375112331
Q65079797-2: RNCC: 3 | RNVC: 2
Q65079797: RNCC: 5 | RNVC: 1
Q65079797-2: RNCC: 5 | RNVC: 2

18 Sep 2004

5340-37-501-1276
Handle Assembly

375011276
KDS 4230-1013: RNCC: 2 | RNVC: 1
KDS 4230-1013: RNCC: 2 | RNVC: 2
AD8880005: RNCC: 3 | RNVC: 2

18 Oct 1988

5340-37-503-1634
Sleeve

375031634
KDS 3805-1024: RNCC: 2 | RNVC: 1
60312639: RNCC: 3 | RNVC: 2

2 Dec 1994

5340-37-517-6882
Mounting Plate

375176882
60821711: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60821711: RNCC: 5 | RNVC: 2

25 Jun 2009

5340-37-523-5164
Mounting Plate

375235164
KDS 1285-1010: RNCC: 2 | RNVC: 1
Q55608716: RNCC: 3 | RNVC: 2
Q55608716: RNCC: 5 | RNVC: 2

21 Jun 2012

5340-37-526-1116
Mounting Bracket

375261116
91026171: RNCC: 3 | RNVC: 2
91026171: RNCC: 5 | RNVC: 2

21 May 2013

5340-37-525-8197
Mounting Plate

375258197
N51007001: RNCC: 3 | RNVC: 2
N51007001: RNCC: 5 | RNVC: 2

19 Mar 2013

5340-37-526-1788
Mounting Plate

375261788
91027484: RNCC: 3 | RNVC: 2
91027484: RNCC: 5 | RNVC: 2

4 Jun 2013

5340-37-525-2244
Mounting Plate

375252244
91045347: RNCC: 3 | RNVC: 2
91045347: RNCC: 5 | RNVC: 2

11 Jan 2013

5340-37-524-5023
Access Cover

375245023
60831230: RNCC: 3 | RNVC: 2

24 Sep 2012

5340-37-523-4992
Dust And Moisture Seal Protective Cover

375234992
A60079611: RNCC: 3 | RNVC: 2
A60079611: RNCC: 5 | RNVC: 2

20 Jun 2012

5340-37-524-7922
Mounting Bracket

375247922
60826094: RNCC: 3 | RNVC: 2
60826094: RNCC: 5 | RNVC: 2

30 Oct 2012

5340-37-512-0553
Ba Bracket Assembly

375120553
20163067: RNCC: 3 | RNVC: 2
20163067: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-37-523-9062
Dust And Moisture Seal Protective Cover

375239062
91041793: RNCC: 3 | RNVC: 2
91041793: RNCC: 5 | RNVC: 2

31 Jul 2012

5340-37-511-7607
Angle Bracket

375117607
Q85012594: RNCC: 3 | RNVC: 2
Q85012594: RNCC: 5 | RNVC: 2

31 Mar 2005

5340-37-502-5489
Cushioning Pad

375025489
60089207: RNCC: 3 | RNVC: 2

1 Dec 1993

5340-37-523-7103
Butt Hinge Leaf

375237103
60823412: RNCC: 3 | RNVC: 2
60823412: RNCC: 5 | RNVC: 2

13 Jul 2012

5340-37-524-0013
Mounting Plate

375240013
A60077614: RNCC: 3 | RNVC: 2
A60077614: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-37-509-2836
Mounting Bracket

375092836
KDS 2350-1024: RNCC: 2 | RNVC: 1
60360289: RNCC: 3 | RNVC: 2
60360289: RNCC: 3 | RNVC: 2

14 Oct 2002

5340-37-511-3783
Angle Bracket

375113783
60519017-C: RNCC: 3 | RNVC: 2
60519017-C: RNCC: 5 | RNVC: 2

27 Nov 2004

5340-37-510-7295
Bottle H Side Plate

375107295
60442757: RNCC: 3 | RNVC: 2
60442757: RNCC: 3 | RNVC: 2

19 May 2004

5340-37-515-7609
Runner

375157609
83014438: RNCC: 3 | RNVC: 2
83014438: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-518-2272
Link Rod End

375182272
21844068-006: RNCC: 5 | RNVC: 2
21844068-006: RNCC: 5 | RNVC: 2

23 Jul 2009

5340-37-518-0911
Mounting Plate

375180911
60826073: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826073: RNCC: 5 | RNVC: 2

10 Jul 2009

5340-37-524-3686
Mounting Bracket

375243686
61529042: RNCC: 3 | RNVC: 2
61529042: RNCC: 5 | RNVC: 2

31 Aug 2012

5340-37-524-0927
Housing Fixed Block

375240927
91039747: RNCC: 3 | RNVC: 2
91039747: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-524-4375
Dust And Moisture Seal Protective Cover

375244375
61516040: RNCC: 3 | RNVC: 2
61516040: RNCC: 5 | RNVC: 2

10 Sep 2012

5340-37-524-1122
Angle Bracket

375241122
D60818127: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-37-524-2784
Multiple Angle Bracket

375242784
91038229: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-37-523-8521
Dust And Moisture Seal Protective Cover

375238521
91042274: RNCC: 3 | RNVC: 2
91042274: RNCC: 5 | RNVC: 2

23 Jul 2012

5340-37-515-9240
Door Handle Unit

375159240
Q25022320-3: RNCC: 3 | RNVC: 2
Q25022320-3: RNCC: 5 | RNVC: 2

14 Oct 2008

5340-37-524-9432
Loop Clamp

375249432
1621702-2.1: RNCC: 3 | RNVC: 2
1608399-5: RNCC: D | RNVC: 9

29 Nov 2012

5340-37-526-1346
Emi Filter Cover

375261346
A50052128: RNCC: 3 | RNVC: 2
A50052128: RNCC: 5 | RNVC: 2

29 May 2013

5340-37-525-2023
Mounting Bracket

375252023
91046587: RNCC: 3 | RNVC: 2
91046587: RNCC: 5 | RNVC: 2

10 Jan 2013

5340-37-506-0324
Rubber Bumper

375060324
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341342: RNCC: 3 | RNVC: 2

30 Jul 1999

5340-37-524-7632
Dust And Moisture Seal Protective Plug

375247632
109-019E: RNCC: 3 | RNVC: 2

26 Oct 2012

5340-37-519-9931
Angle Bracket

375199931
KDS 1510-4002: RNCC: 2 | RNVC: 1
85B1713-054: RNCC: 3 | RNVC: 2
85B1713-054: RNCC: 5 | RNVC: 2
85B1713-053: RNCC: D | RNVC: 9

14 Sep 2010

5340-37-524-3066
Mounting Plate

375243066
D60839366: RNCC: 3 | RNVC: 2

28 Aug 2012

5340-37-513-0473
Slide Fixer Seat

375130473
60348727: RNCC: 3 | RNVC: 2
60348727: RNCC: 5 | RNVC: 2

11 May 2006

5340-37-510-9676
Cushioning Pad

375109676
81046424: RNCC: 3 | RNVC: 1
81046424: RNCC: 3 | RNVC: 2

23 Jul 2004

5340-37-515-8313
Padlock

375158313
A60030542: RNCC: 3 | RNVC: 2
A60030542: RNCC: 5 | RNVC: 2

7 Oct 2008

5340-37-519-3085
Mounting Bracket

375193085
81364502: RNCC: 3 | RNVC: 2
81364502: RNCC: 5 | RNVC: 2

10 Mar 2010

5340-37-522-6070
Mounting Plate

375226070
A60072299: RNCC: 3 | RNVC: 2
A60072299: RNCC: 5 | RNVC: 2

6 Feb 2012

5340-37-519-0246
Mounting Plate

375190246
10301.4200.053: RNCC: 3 | RNVC: 2

9 Dec 2009

5340-37-511-7868
Mounting Bracket

375117868
Q85012387: RNCC: 3 | RNVC: 2
Q85012387: RNCC: 5 | RNVC: 2

4 Apr 2005

5340-37-522-2261
Mounting Bracket

375222261
KDS 1510-4002: RNCC: 2 | RNVC: 1
85D7130-421: RNCC: 3 | RNVC: 2
85D7130-421: RNCC: 5 | RNVC: 2

29 Nov 2011

5340-37-508-1489
Mounting Bracket

375081489
50110197: RNCC: 5 | RNVC: 9

18 Oct 2001

5340-37-510-8743
Access Cover

375108743
60671029: RNCC: 3 | RNVC: 1
60671029: RNCC: 3 | RNVC: 2

9 Jul 2004

5340-37-510-7990
Identificatio Plate

375107990
Q55026900: RNCC: 2 | RNVC: 1
Q55026900: RNCC: 3 | RNVC: 1

23 Jun 2004

5340-37-510-2441
Dust And Moisture Seal Protective Plug

375102441
81044418: RNCC: 3 | RNVC: 2
81044418: RNCC: 3 | RNVC: 2

8 Dec 2003

5340-37-520-1594
Mounting Bracket

375201594
A60024082: RNCC: 3 | RNVC: 2
A60024082: RNCC: 5 | RNVC: 2

22 Oct 2010

5340-37-507-4492
Clutch Fixed Plate

375074492
KDS 1375-3003: RNCC: 2 | RNVC: 1
Q35011775: RNCC: 3 | RNVC: 2

18 Oct 2000

5340-37-513-1001
Spacer Collar

375131001
80017435-2: RNCC: 3 | RNVC: 2
80017435-2: RNCC: 5 | RNVC: 2

11 Jul 2006

5340-37-520-8332
Mechanical Stop

375208332
A81670352: RNCC: 3 | RNVC: 2
A81670352-01: RNCC: 3 | RNVC: 2
A81670352-01: RNCC: 5 | RNVC: 2

15 Feb 2011

5340-37-518-0893
Bail Handle

375180893
60826030: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826030: RNCC: 5 | RNVC: 2

10 Jul 2009

5340-37-513-9162
Access Cover

375139162
CF100723AX: RNCC: 3 | RNVC: 2

6 Aug 2007

5340-37-516-1262
Synchro Clamp

375161262
Q55603602: RNCC: 3 | RNVC: 2
Q55603602: RNCC: 5 | RNVC: 2

23 Oct 2008

5340-37-506-0340
Mounting Bracket

375060340
KDS 2350-1024: RNCC: 2 | RNVC: 1
60360866: RNCC: 3 | RNVC: 2

30 Jul 1999

5340-37-505-9639
Multiple Angle Bracket

375059639
KDS 2350-1024: RNCC: 2 | RNVC: 1
60339492: RNCC: 3 | RNVC: 2

19 Jul 1999

5340-37-515-2371
Loop Clamp

375152371
JOC-5N: RNCC: 3 | RNVC: 2
JOC-5N: RNCC: 5 | RNVC: 2

15 May 2008

5340-37-523-1838
Mounting Bracket

375231838
Q65053160-1: RNCC: 3 | RNVC: 2
Q65053160-1: RNCC: 5 | RNVC: 2
Q65053160: RNCC: D | RNVC: 9

14 May 2012

5340-37-527-1502
Doorknob

375271502
BY2-21-1.6: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-37-523-0794
Bumper

375230794
83024721: RNCC: 3 | RNVC: 2
AXFS-D9-L15-V4-N: RNCC: 3 | RNVC: 2
83024721: RNCC: 5 | RNVC: 2

20 Apr 2012

5340-37-527-2391
Mounting Plate

375272391
A50059894: RNCC: 3 | RNVC: 2
A50059894: RNCC: 5 | RNVC: 2

21 Oct 2013

5340-37-526-8724
Butt Hinge

375268724
AS-1360: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-37-510-0310
Angle Bracket

375100310
82912308: RNCC: 3 | RNVC: 2
82912308-01: RNCC: 5 | RNVC: 2

27 Aug 2003

5340-37-521-5153
Spring Tension Clip

375215153
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81018374: RNCC: 3 | RNVC: 2
A81018374-01: RNCC: 5 | RNVC: 2

30 Jun 2011

5340-37-520-6616
Mounting Plate

375206616
KDS 1005-1389: RNCC: 2 | RNVC: 1
Q55607008: RNCC: 3 | RNVC: 2
Q55607008: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-508-1986
Access Cover

375081986
Q55020903: RNCC: 5 | RNVC: 2

7 Nov 2001

5340-37-518-5582
Mounting Plate

375185582
WF537927-01: RNCC: 3 | RNVC: 2

17 Aug 2009

5340-37-516-7988
Mounting Bracket

375167988
60825537: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60825537: RNCC: 5 | RNVC: 2

13 Mar 2009

5340-37-520-4143
Angle Bracket

375204143
85T2305-045: RNCC: 3 | RNVC: 2
85T2305-045: RNCC: 5 | RNVC: 2

6 Dec 2010

5340-37-511-6248
Multiple Angle Bracket

375116248
85Y1091-157: RNCC: 3 | RNVC: 2
85Y1091-157: RNCC: 5 | RNVC: 2

4 Mar 2005

5340-37-502-8249
Support Assembly

375028249
60049101: RNCC: 3 | RNVC: 2

27 Oct 1994

5340-37-527-0214
Access Cover

375270214
81076302: RNCC: 3 | RNVC: 2
81076302: RNCC: 5 | RNVC: 2

8 Oct 2013

5340-37-512-9686
Dust And Moisture Seal Protective Cover

375129686
60365383: RNCC: 3 | RNVC: 2
60365383: RNCC: 5 | RNVC: 2

30 Mar 2006

5340-37-130-2807
Release Spring

371302807
KDC 2510-P0004: RNCC: 2 | RNVC: 1
5340-97-130-2807: RNCC: 2 | RNVC: 2
604 20 041: RNCC: 3 | RNVC: 2
60420041: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-518-7469
Access Cover

375187469
Q25041210: RNCC: 3 | RNVC: 2
Q25041210: RNCC: 5 | RNVC: 2

22 Oct 2009

5340-37-510-3248
Webbing Strap

375103248
81045614: RNCC: 4 | RNVC: 1
81045614-05: RNCC: 5 | RNVC: 9

29 Dec 2003

5340-37-525-8046
Mounting Plate

375258046
95010344: RNCC: 3 | RNVC: 2
95010344: RNCC: 5 | RNVC: 2

17 Mar 2013

5340-37-514-7832
Mounting Plate

375147832
Q55602133: RNCC: 3 | RNVC: 2
Q55602133: RNCC: 5 | RNVC: 2

6 Mar 2008

5340-37-524-0559
Filter Housin Cover

375240559
91039037: RNCC: 3 | RNVC: 2
91039037: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-37-508-6250
Mounting Bracket

375086250
342089502: RNCC: 3 | RNVC: 2
3A420-8950-2: RNCC: 3 | RNVC: 2

22 Feb 2002

5340-37-507-6282

5340-37-519-2164
Block

375192164
60730415: RNCC: 3 | RNVC: 2
60730415: RNCC: 5 | RNVC: 2

5 Feb 2010

5340-37-518-7480
Mounting Bracket

375187480
Q85031045: RNCC: 3 | RNVC: 2
Q85031045: RNCC: 5 | RNVC: 2

22 Oct 2009

5340-37-512-1338
Mounting Plate

375121338
50125913: RNCC: 3 | RNVC: 2
50125913: RNCC: 5 | RNVC: 2

20 Jun 2005

5340-37-505-0767
Mounting Plate

375050767
50106804: RNCC: 3 | RNVC: 2

21 Mar 1998

5340-37-525-5179
Mounting Plate

375255179
A50041484: RNCC: 3 | RNVC: 2
A50041484: RNCC: 5 | RNVC: 2

4 Feb 2013

5340-37-504-6207
Cushioning Pad

375046207
60044406: RNCC: 3 | RNVC: 2
60044406: RNCC: 5 | RNVC: 2

26 Apr 1997

5340-37-506-8721
¤§ Latch

375068721
FSM00080: RNCC: 3 | RNVC: 2

22 Jan 2000

5340-37-513-2729
End Connector

375132729
219-35-174: RNCC: 3 | RNVC: 2
AD60701007: RNCC: 5 | RNVC: 2

10 Nov 2006

5340-37-522-3577
Mechanical Stop

375223577
KDC 1620-T4004: RNCC: 2 | RNVC: 1
A80614659: RNCC: 3 | RNVC: 2
A80614659-01: RNCC: 3 | RNVC: 2
A80614659-01: RNCC: 5 | RNVC: 2

21 Dec 2011

5340-37-502-5362
Hand Crank Arm

375025362
60083252: RNCC: 3 | RNVC: 2
60083252: RNCC: 3 | RNVC: 2

22 Nov 1993

5340-37-508-1523
Dtv Window Pr Cover

375081523
40014806: RNCC: 3 | RNVC: 2
40014806: RNCC: 5 | RNVC: 2

18 Oct 2001

5340-37-512-0816
Mounting Plate

375120816
50125814: RNCC: 3 | RNVC: 2
50125814: RNCC: 5 | RNVC: 2

9 Jun 2005

5340-37-512-0246
Mounting Bracket

375120246
50125294: RNCC: 3 | RNVC: 2
50125294: RNCC: 5 | RNVC: 2

31 May 2005

5340-37-510-4527
Spring Tension Clip

375104527
Q65052219: RNCC: 3 | RNVC: 1
Q65052219-3: RNCC: 3 | RNVC: 2

23 Feb 2004

5340-37-512-8859
Mo Bracket Assembly

375128859
Q25025600: RNCC: 3 | RNVC: 2
Q25025600: RNCC: 5 | RNVC: 2

3 Mar 2006

5340-37-524-0919
Control Front Panel

375240919
91039720: RNCC: 3 | RNVC: 2
91039720: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-507-4004
Mounting Bracket

375074004
60324628: RNCC: 3 | RNVC: 2
60324628: RNCC: 5 | RNVC: 2

26 Sep 2000

5340-37-525-6587
Angle Bracket

375256587
DSN1080/1140-7246: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-37-517-9015
Permanent Magnet

375179015
60250055: RNCC: 3 | RNVC: 2
KM9978636: RNCC: 3 | RNVC: 2
60250055-11: RNCC: 5 | RNVC: 2
KM9978636: RNCC: 6 | RNVC: 1

30 Jun 2009

5340-37-521-4370
Lever Bracket

375214370
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81005345-02: RNCC: 3 | RNVC: 2
A81005345-02: RNCC: 5 | RNVC: 2
A81005345: RNCC: D | RNVC: 9

20 Jun 2011

5340-37-505-0303
Double Angle Bracket

375050303
60087771: RNCC: 3 | RNVC: 2
60087771: RNCC: 5 | RNVC: 2

20 Feb 1998

5340-37-514-3053
Upper Frame

375143053
50129524: RNCC: 3 | RNVC: 2
50129524: RNCC: 5 | RNVC: 2

14 Nov 2007

5340-37-522-2068
Dust And Moisture Seal Protective Cap

375222068
KDS 5895-4031: RNCC: 2 | RNVC: 1
50137519: RNCC: 3 | RNVC: 2
50137519: RNCC: 5 | RNVC: 2

28 Nov 2011

5340-37-501-1072
Bridge Clamp

375011072
KDS 2590-1196: RNCC: 2 | RNVC: 1
60250178: RNCC: 5 | RNVC: 9
60250178: RNCC: 5 | RNVC: 9

20 Sep 1988

5340-37-140-0383
Clearing Strap

371400383
5340-97-140-0383: RNCC: 2 | RNVC: 2
8690466: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-522-0580
Mounting Bracket

375220580
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81351301-02: RNCC: 3 | RNVC: 2
A81351301-02: RNCC: 5 | RNVC: 2
A81351301: RNCC: D | RNVC: 9

7 Nov 2011

5340-37-507-5715
Turbine Support

375075715
51-72504: RNCC: 5 | RNVC: 9
51-72504: RNCC: 5 | RNVC: 9
KGTG: RNCC: 5 | RNVC: 9

26 Dec 2000

5340-37-518-4653
Mounting Bracket

375184653
A20013562: RNCC: 3 | RNVC: 2
A20013562: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-519-1868
Loop Clamp

375191868
81362383: RNCC: 3 | RNVC: 2
81362383: RNCC: 5 | RNVC: 2

22 Jan 2010

5340-37-501-3767
Access Cover

375013767
60724013: RNCC: 3 | RNVC: 2
60724013: RNCC: 5 | RNVC: 2

21 Jul 1989

5340-37-526-5770
Mounting Bracket

375265770
81079678: RNCC: 3 | RNVC: 2
81079678: RNCC: 5 | RNVC: 2

5 Aug 2013

5340-37-508-3491
Cushioning Pad

375083491
95007633: RNCC: 3 | RNVC: 2
95007633-2: RNCC: 3 | RNVC: 2

5 Dec 2001

5340-37-518-0758

5340-37-504-3781
Housing

375043781
KDS 2940-1055: RNCC: 2 | RNVC: 1
KM-2940-1055-4: RNCC: 2 | RNVC: 2
TR5442: RNCC: 3 | RNVC: 2

13 Sep 1996

5340-37-512-7187
Protective Plate

375127187
80017927: RNCC: 3 | RNVC: 2
80017927: RNCC: 5 | RNVC: 2

14 Nov 2005

5340-37-556-9352
Hook Sub Assy

375569352
0K850-56-610A: RNCC: 5 | RNVC: 1

13 Apr 2004

5340-37-512-6948
Ri Bracket Assembly

375126948
61480578: RNCC: 3 | RNVC: 2
61480578: RNCC: 3 | RNVC: 2

28 Oct 2005

5340-37-514-9389
Mounting Bracket

375149389
50139364: RNCC: 3 | RNVC: 2
50139364: RNCC: 5 | RNVC: 2

1 Apr 2008

5340-37-512-3972
Floor Plate

375123972
Q25019376: RNCC: 3 | RNVC: 2
Q25019376: RNCC: 5 | RNVC: 2

8 Aug 2005

5340-37-505-5707
Rotation Stopp Body

375055707
Q55016209: RNCC: 3 | RNVC: 2

8 Mar 1999

5340-37-505-8161
Mounting Bracket

375058161
Q45016438: RNCC: 3 | RNVC: 2

13 Jun 1999

5340-37-512-4477
Mounting Bracket

375124477
20164938: RNCC: 3 | RNVC: 2
20164938: RNCC: 5 | RNVC: 2

24 Aug 2005

5340-37-510-3139
Loop Clamp

375103139
J0-5N: RNCC: 3 | RNVC: 2
80046952: RNCC: 5 | RNVC: 2

26 Dec 2003

5340-37-518-9822
Support Assembly

375189822
61503070: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61503070: RNCC: 5 | RNVC: 2

4 Dec 2009

5340-37-526-1113
Mounting Bracket

375261113
91026188: RNCC: 3 | RNVC: 2
91026188: RNCC: 5 | RNVC: 2

21 May 2013

5340-37-556-5272
Hinge

375565272
60701421: RNCC: 3 | RNVC: 2
60701421: RNCC: 5 | RNVC: 1

31 Mar 2004

5340-37-519-1593
Angle Bracket

375191593
81362528: RNCC: 3 | RNVC: 2
81362528: RNCC: 5 | RNVC: 2

21 Jan 2010

5340-37-510-8914
Mounting Plate

375108914
Q65059093: RNCC: 3 | RNVC: 2

13 Jul 2004

5340-37-521-6687
Mounting Bracket

375216687
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81029313: RNCC: 3 | RNVC: 2
A81029313-01: RNCC: 5 | RNVC: 2

28 Jul 2011

5340-37-507-7021
Angle Bracket

375077021
60325304: RNCC: 3 | RNVC: 2
60325304: RNCC: 5 | RNVC: 2

26 Feb 2001

5340-37-510-9548
Mounting Plate

375109548
60671157: RNCC: 3 | RNVC: 1
60671157: RNCC: 3 | RNVC: 2

22 Jul 2004

5340-37-510-7258
Synchro Clamp

375107258
60442718: RNCC: 3 | RNVC: 2
60442718: RNCC: 3 | RNVC: 2

15 May 2004

5340-37-510-4196
Angle Bracket

375104196
Q65051115: RNCC: 3 | RNVC: 2

13 Feb 2004

5340-37-502-9262
Extension Drawer Slide

375029262
60309023: RNCC: 3 | RNVC: 2

6 Oct 1994

5340-37-505-9206
Mounting Bracket

375059206
KDS 2350-1024: RNCC: 2 | RNVC: 1
60349005-1: RNCC: 3 | RNVC: 2
60349005: RNCC: 3 | RNVC: 2

10 Jul 1999

5340-37-521-7629
Nut And Bolt Locking Plate

375217629
KC-0038-2: RNCC: 3 | RNVC: 2

30 Aug 2011

5340-37-130-2318
Vehicular Safety Belt

371302318
KG0154664: RNCC: 3 | RNVC: 2
60125181: RNCC: 3 | RNVC: 2
KDS 2320-1004.: RNCC: 4 | RNVC: 1
60125181: RNCC: 5 | RNVC: 9
60125181: RNCC: 5 | RNVC: 9

30 Nov 1989

5340-37-525-5897
Mounting Bracket

375255897
83045640: RNCC: 3 | RNVC: 2

14 Feb 2013

5340-37-510-3254
Mounting Plate

375103254
81045634: RNCC: 5 | RNVC: 9

29 Dec 2003

5340-37-526-1206
Block Clamp

375261206
91027421: RNCC: 3 | RNVC: 2
91027421: RNCC: 5 | RNVC: 2

28 May 2013

5340-37-503-3690
Support

375033690
50075943: RNCC: 3 | RNVC: 2

26 Apr 1995

5340-37-503-1214
Access Cover

375031214
60311275: RNCC: 3 | RNVC: 2

22 Nov 1994

5340-37-510-6868
Dust And Moisture Seal Protective Cover

375106868
70021660: RNCC: 3 | RNVC: 1
70021660: RNCC: 5 | RNVC: 2

28 Apr 2004

5340-37-524-8999
Clamp

375248999
60829245: RNCC: 3 | RNVC: 2
60829245: RNCC: 5 | RNVC: 2

26 Nov 2012

5340-37-519-2694
Angle Bracket

375192694
599-41088: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-37-518-0909
Mounting Plate

375180909
60826071: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826071: RNCC: 5 | RNVC: 2

10 Jul 2009

5340-37-517-8909
Protection Net

375178909
PG-47-1: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-37-511-9915
Block Clamp

375119915
85GA4364-001: RNCC: 3 | RNVC: 2
85GA4364-001: RNCC: 5 | RNVC: 2

23 May 2005

5340-37-511-8975
Angle Bracket

375118975
85Y9133-089: RNCC: 3 | RNVC: 2
85Y9133-089: RNCC: 5 | RNVC: 2

28 Apr 2005

5340-37-502-7675
Mounting Plate

375027675
60085609: RNCC: 3 | RNVC: 2

14 Jun 1994

5340-37-524-5308
Retaining Band

375245308
60831344: RNCC: 3 | RNVC: 2

24 Sep 2012

5340-37-514-5554
Waterproof Assembly

375145554
50142453: RNCC: 3 | RNVC: 2
50142453: RNCC: 5 | RNVC: 2

27 Dec 2007

5340-37-514-9688
Mounting Plate

375149688
50146242: RNCC: 3 | RNVC: 2
50146242: RNCC: 5 | RNVC: 2

6 Apr 2008

5340-37-522-5351
Locking Stay

375225351
B14672L: RNCC: 3 | RNVC: 2

26 Jan 2012

5340-37-525-1247
Manual Control Handle

375251247
SM-MV-HD-305: RNCC: 3 | RNVC: 2

4 Jan 2013

5340-37-521-8625
Mounting Bracket

375218625
KDS 2350-4003: RNCC: 2 | RNVC: 1
61531320: RNCC: 3 | RNVC: 2
61531320: RNCC: 5 | RNVC: 2

19 Sep 2011

5340-37-505-5546
Mounting Bracket

375055546
KDS 1510-1003: RNCC: 2 | RNVC: 1
81214601: RNCC: 5 | RNVC: 9
81214601-01: RNCC: 5 | RNVC: 9

27 Feb 1999

5340-37-526-3808
Dust And Moisture Seal Protective Plug

375263808
9836811: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-37-510-3493
Multiple Angle Bracket

375103493
80044646: RNCC: 3 | RNVC: 2

12 Jan 2004

5340-37-525-6495
Headless Straight Rod

375256495
3101011810: RNCC: 3 | RNVC: 2

22 Feb 2013

5340-37-526-5620
Mounting Plate

375265620
3M-123974: RNCC: 3 | RNVC: 2

1 Aug 2013

5340-37-504-8864
Resilient Mount

375048864
KDS 2320-1023: RNCC: 2 | RNVC: 1
60380421: RNCC: 5 | RNVC: 9
60380421: RNCC: 5 | RNVC: 9

11 Nov 1997

5340-37-521-3193
Spacing Threaded Standoff

375213193
KDS4230-4001: RNCC: 2 | RNVC: 1
Q75012955: RNCC: 3 | RNVC: 2
Q75012955: RNCC: 5 | RNVC: 2

16 May 2011

5340-37-513-4890
Loop Clamp

375134890
A60016480-2: RNCC: 3 | RNVC: 2
A60016480: RNCC: 5 | RNVC: 1

7 Feb 2007

5340-37-526-1663
Manual Control Handle

375261663
381-7733: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-37-508-5157
Spring Tension Clip

375085157
Q65028209: RNCC: 3 | RNVC: 2
Q65039047: RNCC: 3 | RNVC: 2

26 Jan 2002

5340-37-504-8147
Retaining Clip

375048147
KDS 2320-1023: RNCC: 2 | RNVC: 1
60381921: RNCC: 5 | RNVC: 9
60381921: RNCC: 5 | RNVC: 9

21 Oct 1997

5340-37-519-9363
Mounting Bracket

375199363
85E2805-809: RNCC: 3 | RNVC: 2
85E2805-809: RNCC: 5 | RNVC: 2

31 Aug 2010

5340-37-130-2484
Heater Hose Clamp

371302484
5340-97-130-2484: RNCC: 2 | RNVC: 2
992822400: RNCC: 3 | RNVC: 2
992822400: RNCC: 3 | RNVC: 2
KDS 2320-1004.: RNCC: 4 | RNVC: 1
99282 2400: RNCC: 5 | RNVC: 9
99282 2400: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-37-522-4146
Mounting Bracket

375224146
KDC 1680-T4005: RNCC: 2 | RNVC: 1
A81025266: RNCC: 3 | RNVC: 2
A81025266-01: RNCC: 3 | RNVC: 2
A81025266-01: RNCC: 5 | RNVC: 2
A81025266-01: RNCC: 5 | RNVC: 2

28 Dec 2011

5340-37-522-4612
Dust And Moisture Seal Protective Cover

375224612
60836638: RNCC: 3 | RNVC: 2

9 Jan 2012

5340-37-520-4060
Liquid Holding Unit Filler Neck

375204060
A60024938: RNCC: 3 | RNVC: 2
A60024938: RNCC: 5 | RNVC: 2

6 Dec 2010

5340-37-525-5769
Mounting Bracket

375255769
C00940: RNCC: 3 | RNVC: 2

14 Feb 2013

5340-37-519-5691
Mounting Plate

375195691
A20008756: RNCC: 3 | RNVC: 2
A20008756: RNCC: 5 | RNVC: 2

4 Jun 2010

5340-37-512-4516
Drive Assembl Cover

375124516
20166032: RNCC: 3 | RNVC: 2
20166032: RNCC: 5 | RNVC: 2

24 Aug 2005

5340-37-518-4719
Rim Latch

375184719
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20013415: RNCC: 3 | RNVC: 2
A20013415: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-521-8652
Access Cover

375218652
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81087511: RNCC: 3 | RNVC: 2
A81087511-01: RNCC: 5 | RNVC: 2

20 Sep 2011

5340-37-504-1589
Bracket

375041589
KDS 5855-1021: RNCC: 2 | RNVC: 1
40012232: RNCC: 3 | RNVC: 2

27 May 1996

5340-37-519-1232
Angle Bracket

375191232
81533700-01: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-516-9279
Mounting Bracket

375169279
60820615: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60820615: RNCC: 5 | RNVC: 2

31 Mar 2009

5340-37-501-2031
Catch Strike

375012031
KDC2350-P0003-6: RNCC: 2 | RNVC: 1
60704360: RNCC: 3 | RNVC: 2
60704360: RNCC: 5 | RNVC: 2

22 Dec 1988

5340-37-508-8564
Retaining Band

375088564
Q65039041-5: RNCC: 3 | RNVC: 2
Q65039041: RNCC: 3 | RNVC: 2

23 Apr 2002

5340-37-505-4763
Mounting Bracket

375054763
Q55016140: RNCC: 3 | RNVC: 2

23 Jan 1999

5340-37-511-7097
Join-String As Clip

375117097
Q45018887: RNCC: 3 | RNVC: 2
Q45018887: RNCC: 5 | RNVC: 2

23 Mar 2005

5340-37-520-6364
Mounting Plate

375206364
A20017739: RNCC: 3 | RNVC: 2
A20017739: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-506-5282
El Filter Fatstener

375065282
Q75011926: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-37-510-3134
Mounting Plate

375103134
80040213: RNCC: 3 | RNVC: 2

26 Dec 2003

5340-37-523-7721
Ri Bracket Assembly

375237721
A60081156: RNCC: 3 | RNVC: 2
A60081156: RNCC: 5 | RNVC: 2

18 Jul 2012

5340-37-504-4150
Block Clamp

375044150
50095445: RNCC: 5 | RNVC: 9

23 May 1997

5340-37-522-9454
Angle Bracket

375229454
50139964: RNCC: 3 | RNVC: 2
50139964: RNCC: 5 | RNVC: 2

3 Apr 2012

5340-37-518-7190
Cable Block

375187190
60828320: RNCC: 3 | RNVC: 2
KDS 1230-4002: RNCC: 4 | RNVC: 1
60828320: RNCC: 5 | RNVC: 2

12 Oct 2009

5340-37-510-5254
Rea Tunnel Assembly

375105254
60573525: RNCC: 3 | RNVC: 2
60573525: RNCC: 3 | RNVC: 2

23 Mar 2004

5340-37-516-0863
Angle Bracket

375160863
91029355: RNCC: 3 | RNVC: 2
91029355: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-511-4131
Moun Plate Assembly

375114131
Q55110792: RNCC: 3 | RNVC: 2
Q55110792: RNCC: 5 | RNVC: 2

18 Dec 2004

5340-37-520-5462
Mounting Plate

375205462
KDS 1510-4002: RNCC: 2 | RNVC: 1
85B1113-016: RNCC: 3 | RNVC: 2
85B1113-016: RNCC: 5 | RNVC: 2
85B1113-015: RNCC: D | RNVC: 9

13 Dec 2010

5340-37-511-7149
Multiple Angle Bracket

375117149
85P9110-003: RNCC: 3 | RNVC: 2
85P9110-003: RNCC: 5 | RNVC: 2

23 Mar 2005

5340-37-518-9149
Mounting Plate

375189149
WF391114-01: RNCC: 3 | RNVC: 2

30 Nov 2009

5340-37-518-9217
Mounting Bracket

375189217
WF954301-01: RNCC: 3 | RNVC: 2

30 Nov 2009

5340-37-506-5208
Mounting Bracket

375065208
KDS 2350-1024: RNCC: 2 | RNVC: 1
60347140: RNCC: 3 | RNVC: 2

19 Oct 1999

5340-37-518-8766
Mo Bracket Assembly

375188766
599-M41402: RNCC: 3 | RNVC: 2
599-M41402-00: RNCC: 5 | RNVC: 2

19 Nov 2009

5340-37-508-4530

5340-37-507-5070

5340-37-522-7208
Mounting Bracket

375227208
A60073665: RNCC: 3 | RNVC: 2
A60073665: RNCC: 5 | RNVC: 2

22 Feb 2012

5340-37-520-7706
Angle Bracket

375207706
A81140304: RNCC: 3 | RNVC: 2
A8114030401: RNCC: 3 | RNVC: 2
A8114030401: RNCC: 5 | RNVC: 2

9 Feb 2011

5340-37-523-7929
Rear Board

375237929
A60078624: RNCC: 3 | RNVC: 2
A60078624: RNCC: 5 | RNVC: 2

18 Jul 2012

5340-37-508-3242
Power Lock

375083242
95008021: RNCC: 3 | RNVC: 2
SWLE200 60X90: RNCC: 3 | RNVC: 2

1 Dec 2001

5340-37-525-2231
Mounting Plate

375252231
91045192: RNCC: 3 | RNVC: 2
91045192: RNCC: 5 | RNVC: 2

11 Jan 2013

5340-37-518-8936
Snap Hook

375188936
92003164: RNCC: 3 | RNVC: 2
92003164: RNCC: 5 | RNVC: 2

24 Nov 2009

5340-37-500-1635
Access Cover

375001635
65,01414-0004: RNCC: 5 | RNVC: 9
D2848M: RNCC: 5 | RNVC: 9

16 Oct 1990

5340-37-511-6398
Angle Bracket

375116398
85PF9441-233: RNCC: 3 | RNVC: 2
85PF9441-233: RNCC: 5 | RNVC: 2

10 Mar 2005

5340-37-520-6602
Mounting Plate

375206602
KDS 1005-1389: RNCC: 2 | RNVC: 1
Q55606371: RNCC: 3 | RNVC: 2
Q55606371: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-522-5147
Cover Mb

375225147
69181A-00: RNCC: 3 | RNVC: 2

18 Jan 2012

5340-37-526-5289
Bow Handle

375265289
DAV040102-01: RNCC: 3 | RNVC: 2
DAV040102: RNCC: 5 | RNVC: 2

29 Jul 2013

5340-37-524-1724
Mounting Bracket

375241724
G21-1080: RNCC: 3 | RNVC: 2

16 Aug 2012

5340-37-519-2932
Mounting Bracket

375192932
81363907: RNCC: 3 | RNVC: 2
81363907: RNCC: 5 | RNVC: 2

8 Mar 2010

5340-37-505-5576
Mounting Bracket

375055576
Q45016710: RNCC: 3 | RNVC: 2

5 Jun 1999

5340-37-508-9233

5340-37-508-2373

5340-37-524-9801
Loop Clamp

375249801
1654143-1.0: RNCC: 3 | RNVC: 2
1602384-2: RNCC: D | RNVC: 9

4 Dec 2012

5340-37-512-0350
Tension R Connector

375120350
Q85011833: RNCC: 3 | RNVC: 2
Q85011833: RNCC: 5 | RNVC: 2

2 Jun 2005

5340-37-114-4197
Water Hose Clamp

371144197
KDC 2510-P0007: RNCC: 2 | RNVC: 1
5340-97-114-4197: RNCC: 2 | RNVC: 2
60427018: RNCC: 3 | RNVC: 2
2320-1005: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-37-512-1026
Angle Bracket

375121026
85H5531-003: RNCC: 3 | RNVC: 2
85H5531-003: RNCC: 5 | RNVC: 2

13 Jun 2005

5340-37-523-4519
Loop Clamp

375234519
1614982-4.1: RNCC: 3 | RNVC: 2
1602384-2: RNCC: D | RNVC: 9

13 Jun 2012

5340-37-521-8647
Access Cover

375218647
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81087411-02: RNCC: 3 | RNVC: 2
A81087411-02: RNCC: 5 | RNVC: 2
A81087411: RNCC: D | RNVC: 9

20 Sep 2011

5340-37-514-1053
Bow Handle

375141053
KDS 2320-4006: RNCC: 2 | RNVC: 1
A60017536: RNCC: 3 | RNVC: 2
A60017536: RNCC: 5 | RNVC: 2
KA-304: RNCC: 5 | RNVC: 2

2 Oct 2007

5340-37-518-7821
Mounting Plate

375187821
61503477: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61503477: RNCC: 5 | RNVC: 2

30 Oct 2009

5340-37-516-5554
Hand Feeder

375165554
20030333: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030333: RNCC: 5 | RNVC: 2

23 Dec 2008

5340-37-511-7537
Multiple Angle Bracket

375117537
85PF9580-201: RNCC: 3 | RNVC: 2
85PF9580-201: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-37-501-2717

5340-37-501-0693

5340-37-501-0686
Angle Bracket

375010686
60606304: RNCC: 5 | RNVC: 9

26 Aug 1988

5340-37-130-0176
Spring

371300176
5340-97-130-0176: RNCC: 2 | RNVC: 2
076116320: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-114-0563
Return Spring

371140563
KDC 2510-P0001: RNCC: 2 | RNVC: 1
5340-97-114-0563: RNCC: 2 | RNVC: 2
075041308: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-523-5410
Angle Bracket

375235410
61481287-1: RNCC: 3 | RNVC: 2
61481287-1: RNCC: 5 | RNVC: 2
61481287: RNCC: D | RNVC: 9

26 Jun 2012

5340-37-525-7227
Angle Bracket

375257227
TSF-VMAR03-20HW: RNCC: 3 | RNVC: 2

8 Mar 2013

5340-37-505-7218
Mounting Plate

375057218
KDS 1510-4001: RNCC: 2 | RNVC: 1
81272483-01: RNCC: 5 | RNVC: 9
81272483: RNCC: 5 | RNVC: 9

18 May 1999

5340-37-522-0873
Bumper

375220873
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81506349-05: RNCC: 3 | RNVC: 2
A81506349: RNCC: 3 | RNVC: 2
A81506349-05: RNCC: 5 | RNVC: 2

14 Nov 2011

5340-37-525-3308
Mounting Plate

375253308
MT-TRU-0481: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-37-506-4797
Angle Bracket

375064797
81954305: RNCC: 5 | RNVC: 9
81954305-01: RNCC: 5 | RNVC: 9

18 Sep 1999

5340-37-509-6667

5340-37-509-6729

5340-37-511-3846
Access Cover

375113846
Q65040383-C: RNCC: 3 | RNVC: 2
Q65040383: RNCC: 5 | RNVC: 1
Q65040383-C: RNCC: 5 | RNVC: 2

1 Dec 2004

5340-37-511-8820
Double Angle Bracket

375118820
85K7254-007: RNCC: 3 | RNVC: 2
85K7254-007: RNCC: 5 | RNVC: 2

22 Apr 2005

5340-37-521-9228
Cushioning Pad

375219228
KDS 2350-4003: RNCC: 2 | RNVC: 1
61527210: RNCC: 3 | RNVC: 2
61527210: RNCC: 5 | RNVC: 2

23 Sep 2011

5340-37-504-8614
Mounting Bracket

375048614
KDS 2320-1023: RNCC: 2 | RNVC: 1
60379311: RNCC: 5 | RNVC: 9
60379311: RNCC: 5 | RNVC: 9

6 Nov 1997

5340-37-524-7365
Righ Plate Assembly

375247365
N51008374: RNCC: 3 | RNVC: 2
N51008374: RNCC: 5 | RNVC: 2

24 Oct 2012

5340-37-508-5956
Spring Tension Clip

375085956
Q65035782: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-37-508-9968
Shock-Absor Bracket

375089968
37127054: RNCC: 3 | RNVC: 2
2510NSN020175: RNCC: 5 | RNVC: 2

21 Jun 2002

5340-37-504-4066
Angle Bracket

375044066
50095602: RNCC: 5 | RNVC: 9

1 Oct 1996

5340-37-521-4206
Mounting Bracket

375214206
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81004331-01: RNCC: 3 | RNVC: 2
A81004331-01: RNCC: 5 | RNVC: 2
A81004331: RNCC: D | RNVC: 9

14 Jun 2011

5340-37-510-3249
Multiple Angle Bracket

375103249
81045615: RNCC: 4 | RNVC: 1
81045615-01: RNCC: 5 | RNVC: 9

29 Dec 2003

5340-37-505-9699
Headless Grooved Rod

375059699
KDS 2350-1024: RNCC: 2 | RNVC: 1
60347138: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-37-525-2871
Mounting Bracket

375252871
Q65800194-14: RNCC: D | RNVC: 9

16 Jan 2013

5340-37-522-2396
Retaining Strap

375222396
KDS 1510-4002: RNCC: 2 | RNVC: 1
85D7240-421: RNCC: 3 | RNVC: 2
85D7240-421: RNCC: 5 | RNVC: 2

1 Dec 2011

5340-37-524-9910
Mounting Bracket

375249910
61527254: RNCC: 3 | RNVC: 2
61527254: RNCC: 5 | RNVC: 2

5 Dec 2012

5340-37-501-9534
Plain Solid Disk

375019534
KDS 1010-1246: RNCC: 2 | RNVC: 1
20024454: RNCC: 3 | RNVC: 2

5 Aug 1991

5340-37-513-8324
Lock Bar

375138324
532 06: RNCC: 3 | RNVC: 2

6 Jul 2007

5340-37-512-8630
Multiple Angle Bracket

375128630
Q25028915: RNCC: 3 | RNVC: 2
Q25028915: RNCC: 5 | RNVC: 2

24 Feb 2006

5340-37-524-3223
Mounting Bracket

375243223
D60839544: RNCC: 3 | RNVC: 2

28 Aug 2012

5340-37-521-8193
Double Angle Bracket

375218193
KDS1510-4002: RNCC: 2 | RNVC: 1
85Y9134-111: RNCC: 3 | RNVC: 2
85Y9134-111: RNCC: 5 | RNVC: 2

7 Sep 2011

5340-37-518-6862
Access Cover

375186862
61523215: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61523215: RNCC: 5 | RNVC: 2

28 Sep 2009

5340-37-521-4948
Access Cover

375214948
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81006637: RNCC: 3 | RNVC: 2
A81006637-01: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-37-515-2090
Mounting Bracket

375152090
Q45022366: RNCC: 3 | RNVC: 2
Q45022366: RNCC: 5 | RNVC: 2

13 May 2008

5340-37-514-9593
Mounting Bracket

375149593
91025734: RNCC: 3 | RNVC: 2
91025734: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-37-519-2053
Mounting Plate

375192053
81362982: RNCC: 3 | RNVC: 2
81362982: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-37-526-3156
Mounting Bracket

375263156
81079677: RNCC: 3 | RNVC: 2
81079677: RNCC: 5 | RNVC: 2

4 Jul 2013

5340-37-510-3284
Mounting Plate

375103284
81045034: RNCC: 5 | RNVC: 9

30 Dec 2003

5340-37-502-8096
Metal Grille

375028096
60082751: RNCC: 3 | RNVC: 2

3 Aug 1994

5340-37-520-4128
Angle Bracket

375204128
85T2303-045: RNCC: 3 | RNVC: 2
85T2303-045: RNCC: 5 | RNVC: 2

6 Dec 2010

5340-37-520-0846
Mounting Bracket

375200846
KDS 1510-4002: RNCC: 2 | RNVC: 1
85B0735-003: RNCC: 3 | RNVC: 2
85B0735-003: RNCC: 5 | RNVC: 2

30 Sep 2010

5340-37-506-1392
Mounting Bracket

375061392
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341576: RNCC: 3 | RNVC: 2

11 Aug 1999

5340-37-513-0270
Loop Clamp

375130270
80043355: RNCC: 3 | RNVC: 2
80043355: RNCC: 5 | RNVC: 2

2 May 2006

5340-37-508-9989
Mounting Bracket

375089989
37134330: RNCC: 3 | RNVC: 2
3193NSN020055: RNCC: 3 | RNVC: 2

24 Jun 2002

5340-37-501-0543
Access Cover

375010543
60651008: RNCC: 5 | RNVC: 9

20 Sep 1989

5340-37-513-9798
Dust And Moisture Seal Protective Cover

375139798
Q55028549: RNCC: 3 | RNVC: 2
Q55028549: RNCC: 5 | RNVC: 2

28 Aug 2007

5340-37-514-5708
Handle

375145708
50142942: RNCC: 3 | RNVC: 2
50142942: RNCC: 5 | RNVC: 2

7 Jan 2008

5340-37-511-8462
Moun Plate Assembly

375118462
Q55111767: RNCC: 3 | RNVC: 2
Q55111767: RNCC: 5 | RNVC: 2

15 Apr 2005

5340-37-508-1054
Bridge Clamp

375081054
Q55106857: RNCC: 3 | RNVC: 2

4 Oct 2001

5340-37-513-1843
Dust And Moisture Seal Protective Plug Set

375131843
80043141: RNCC: 3 | RNVC: 2
80043141: RNCC: 5 | RNVC: 2

2 Aug 2006

5340-37-511-0924
Level Cover

375110924
60444670-1: RNCC: 3 | RNVC: 2
60444670: RNCC: 5 | RNVC: 1
60444670-1: RNCC: 5 | RNVC: 2

20 Aug 2004

5340-37-515-0216
Mounting Plate

375150216
50136908: RNCC: 3 | RNVC: 2
50136908: RNCC: 5 | RNVC: 2

14 Apr 2008

5340-37-525-7789
Mounting Plate

375257789
N51007571: RNCC: 3 | RNVC: 2
N51007571: RNCC: 5 | RNVC: 2

14 Mar 2013

5340-37-512-8854
Mounting Plate

375128854
Q25025408: RNCC: 3 | RNVC: 2
Q25025408: RNCC: 5 | RNVC: 2

3 Mar 2006

5340-37-527-1491
Access Door Hinge

375271491
BYHTN14: RNCC: 3 | RNVC: 2

15 Oct 2013

5340-37-518-0862
Mounting Plate

375180862
60826016: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826016: RNCC: 5 | RNVC: 2

9 Jul 2009

5340-37-506-0262
Access Cover

375060262
KDS 2350-1024: RNCC: 2 | RNVC: 1
60360864: RNCC: 3 | RNVC: 2

27 Jul 1999

5340-37-019-0224

5340-37-521-0499
Dust And Moisture Seal Protective Cover

375210499
Q85031380: RNCC: 3 | RNVC: 2
Q85031380: RNCC: 5 | RNVC: 2

30 Mar 2011

5340-37-510-7802
Mounting Bracket

375107802
60575651: RNCC: 2 | RNVC: 2
60575651: RNCC: 3 | RNVC: 2
60575651: RNCC: 5 | RNVC: 2

17 Jun 2004

5340-37-510-8410
Terminal Sleeve

375108410
70019907: RNCC: 3 | RNVC: 2
H0243-67-712: RNCC: 5 | RNVC: 2
70019907: RNCC: 5 | RNVC: 2

4 Jul 2004

5340-37-522-2881
Manual Control Lever

375222881
KDS 2350-4003: RNCC: 2 | RNVC: 1
61507462: RNCC: 3 | RNVC: 2
61507462: RNCC: 5 | RNVC: 2
61507461: RNCC: D | RNVC: 9

12 Dec 2011

5340-37-516-2310
Cushioning Pad

375162310
83008065: RNCC: 3 | RNVC: 2
83008065: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-37-504-4270
Cushioning Pad

375044270
60042157: RNCC: 3 | RNVC: 2
VDS26187: RNCC: 5 | RNVC: 2

10 Oct 1996

5340-37-526-6129
Block Clamp

375266129
81078401: RNCC: 3 | RNVC: 2
81078401: RNCC: 5 | RNVC: 2

8 Aug 2013

5340-37-522-8458
Mounting Bracket

375228458
KDS 5895-4032: RNCC: 2 | RNVC: 1
50140854: RNCC: 3 | RNVC: 2
50140854: RNCC: 5 | RNVC: 2

19 Mar 2012

5340-37-503-2914
Rod End Clevis

375032914
KDS 1055-2037: RNCC: 2 | RNVC: 2
20025584: RNCC: 3 | RNVC: 2

23 Jan 1995

5340-37-523-2094
Bolt And Spacer Kit

375232094
W607-D7700-0: RNCC: 3 | RNVC: 2

17 May 2012

5340-37-524-2758
Fan A Mount Adapter

375242758
91038181: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-37-514-2046
Rod End Connector

375142046
20028165: RNCC: 3 | RNVC: 2
20028165: RNCC: 5 | RNVC: 2

29 Oct 2007

Load More Results