What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Quick Release Plunger?

A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is a Mortise Latch?

A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.

What is a Flush Catch?

A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).

What is a Clamp Bolt Assembly?

A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.

What is a Retaining Band?

A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.

What is a Bow Handle?

A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.

What is a Recess Handle?

A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.

What is a Bail Handle?

A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.

What is a Double Angle Bracket?

A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

What is a Strap Fastener Loop?

A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.

What is a Webbing Strap?

A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.

What is a Spring Tension Clip?

A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.

Hardware, Commercial - Korea (KR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Korea (KR) - NCB is 37

Page 48 of 56

NSN Format for Hardware, Commercial
Codified by Korea

53	40	37	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Korea (KR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 19 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 59 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 32 Items
Holder,Loop 25 Items
Holder,Spring 36 Items
What is a Rod End Connector? 58 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 89 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is a Metal Grille? 15 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 15 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 145 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 25 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 20 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Thumb Latch? 14 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 16 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 11 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Sliding Door Track? 13 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorknob? 12 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Tee Hinge? 11 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 16 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is a Butt Hinge Leaf? 45 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Mending Plate? 21 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 30 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Dust And Moisture Seal Protective Cap? 98 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 116 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 34 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 53 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 97 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 14 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Nut And Bolt Retainer? 12 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is an Angle Bracket? 1486 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 10 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Loop Clamp? 304 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 53 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 26 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 45 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 13 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flush Catch? 10 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 26 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 76 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 234 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 10 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 44 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 255 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 11 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 95 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 116 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 36 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 472 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 49 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 14 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Window Retaining Plate? 35 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 114 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 57 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Helical Compression Spring Seat? 18 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 40 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 42 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 19 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Vent Plug? 29 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 1435 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Threaded Rod End? 80 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 11 Items
What is a Manual Control Handle? 127 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Lever Bracket? 37 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 33 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 254 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 4187 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Section Block Clamp? 134 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Beam Gripping Clamp? 13 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 2701 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Synchro Clamp? 57 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 118 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Threaded Standoff? 11 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 36 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 247 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 33 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Runner? 23 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Track Stop? 13 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 30 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Masking Plate? 18 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 318 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 48 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Sliding Block? 18 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 41 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 25 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Shimmy Damper? 13 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 124 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 21 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Resilient Mount Plate? 12 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 80 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 11 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 91 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Locking Stay? 13 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 26 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Aircraft Latch Hook? 19 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 55 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 48 of 56

5340-37-160-2001
Spring

371602001
5340-97-160-2001: RNCC: 2 | RNVC: 2
0101-016-0004: RNCC: 3 | RNVC: 2
KDS-2330-1006: RNCC: 4 | RNVC: 1

23 Nov 1987

5340-37-506-5704
Mounting Bracket

375065704
KDS 5820-3001: RNCC: 2 | RNVC: 1
Q55100028: RNCC: 5 | RNVC: 9

2 Nov 1999

5340-37-505-1375

5340-37-504-4022

5340-37-523-8922
Access Door Hinge

375238922
60821505: RNCC: 3 | RNVC: 2
60821505: RNCC: 5 | RNVC: 2

26 Jul 2012

5340-37-503-3570

5340-37-504-3557

5340-37-515-2370
Mounting Plate

375152370
50144751: RNCC: 3 | RNVC: 2
50144751: RNCC: 5 | RNVC: 2

15 May 2008

5340-37-519-0006
Mounting Bracket

375190006
20030558: RNCC: 3 | RNVC: 2
20030558: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1

9 Dec 2009

5340-37-518-4746
Manual Control Lever

375184746
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20007198: RNCC: 3 | RNVC: 2
A20007198: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-518-5483
Clamping Catch

375185483
60826891: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826891: RNCC: 5 | RNVC: 2

17 Aug 2009

5340-37-507-3749
Link Assembly

375073749
60324862: RNCC: 3 | RNVC: 2
60324862: RNCC: 5 | RNVC: 2

21 Sep 2000

5340-37-502-5257
Cushioning Pad

375025257
60078809: RNCC: 3 | RNVC: 2

15 Nov 1993

5340-37-510-3132
Mounting Bracket

375103132
81046318: RNCC: 5 | RNVC: 9

26 Dec 2003

5340-37-502-8729
Bar Weldment

375028729
60308479: RNCC: 3 | RNVC: 2

30 Nov 1996

5340-37-519-1695
Access Cover

375191695
81361760: RNCC: 3 | RNVC: 2
81361760: RNCC: 5 | RNVC: 2

22 Jan 2010

5340-37-518-3035
Control Board

375183035
PP088: RNCC: 5 | RNVC: 2

27 Jul 2009

5340-37-527-1423
Mounting Bracket

375271423
A50056970: RNCC: 3 | RNVC: 2
A50056970: RNCC: 5 | RNVC: 2

15 Oct 2013

5340-37-516-8041
Mounting Bracket

375168041
60820604: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60820604: RNCC: 5 | RNVC: 2

13 Mar 2009

5340-37-510-0146
Angle Bracket

375100146
82912303: RNCC: 3 | RNVC: 2
82912303-01: RNCC: 5 | RNVC: 2

22 Aug 2003

5340-37-520-8275
Mounting Plate

375208275
A81667350: RNCC: 3 | RNVC: 2
A81667350-01: RNCC: 3 | RNVC: 2
A81667350-01: RNCC: 5 | RNVC: 2

14 Feb 2011

5340-37-033-0907
Ring

370330907
5340-97-033-0907: RNCC: 2 | RNVC: 2
70935700: RNCC: 3 | RNVC: 2

1 Jun 1989

5340-37-512-5400
Dust And Moisture Seal Boot

375125400
FTC-85VG8339-045: RNCC: 3 | RNVC: 2
85VG8339-003: RNCC: 5 | RNVC: 1
FTC-85VG8339-045: RNCC: 5 | RNVC: 2

6 Sep 2005

5340-37-521-5995
Lock Bar

375215995
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81018475: RNCC: 3 | RNVC: 2
A81018475-01: RNCC: 5 | RNVC: 2

18 Jul 2011

5340-37-503-3535

5340-37-505-3823

5340-37-511-8273
Inver Tray Assembly

375118273
85P1821-001: RNCC: 3 | RNVC: 2
85P1821-001: RNCC: 5 | RNVC: 2

8 Apr 2005

5340-37-015-5275

5340-37-524-3224
Mounting Plate

375243224
D60839545: RNCC: 3 | RNVC: 2

28 Aug 2012

5340-37-510-2957
Angle Bracket

375102957
80044709: RNCC: 2 | RNVC: 2
80044709: RNCC: 3 | RNVC: 2

22 Dec 2003

5340-37-524-1022
Block

375241022
A60077317-1: RNCC: 3 | RNVC: 2
A60077317-1: RNCC: 5 | RNVC: 2
A60077317: RNCC: D | RNVC: 9

10 Aug 2012

5340-37-523-1343
Rim Lock

375231343
60340052-1: RNCC: 3 | RNVC: 2
60340052-1: RNCC: 5 | RNVC: 2
60340052: RNCC: D | RNVC: 9

7 May 2012

5340-37-503-2519
Rim Clenching Clamp

375032519
KDS 5985-1023: RNCC: 2 | RNVC: 1
50082835: RNCC: 3 | RNVC: 2

3 Dec 1996

5340-37-521-6642
Mounting Bracket

375216642
KDS1510-4002: RNCC: 2 | RNVC: 1
85S5530-323: RNCC: 3 | RNVC: 2
85S5530-323: RNCC: 5 | RNVC: 2

27 Jul 2011

5340-37-511-5928
Mounting Plate

375115928
20026904: RNCC: 3 | RNVC: 2
20026904: RNCC: 5 | RNVC: 2

22 Feb 2005

5340-37-527-0483
Mounting Plate

375270483
A50046771: RNCC: 3 | RNVC: 2
A50046771: RNCC: 5 | RNVC: 2

8 Oct 2013

5340-37-514-0331
Dust And Moisture Seal Protective Cover

375140331
10301.2100.626. 001: RNCC: 3 | RNVC: 2

6 Sep 2007

5340-37-510-7803
Cushioning Pad

375107803
60575652: RNCC: 2 | RNVC: 2
60575652: RNCC: 3 | RNVC: 2
60575652: RNCC: 5 | RNVC: 2

17 Jun 2004

5340-37-512-6160
Bow Handle

375126160
AD50001611: RNCC: 3 | RNVC: 2
AD50001611: RNCC: 5 | RNVC: 2

30 Sep 2005

5340-37-519-5847
Mounting Bracket

375195847
10301.0100.333.002: RNCC: 3 | RNVC: 2

8 Jun 2010

5340-37-514-2635
Botto Cover Assemby

375142635
50129514: RNCC: 3 | RNVC: 2
50129514: RNCC: 5 | RNVC: 2

9 Nov 2007

5340-37-519-2926
Mounting Plate

375192926
81363898: RNCC: 3 | RNVC: 2
81363898: RNCC: 5 | RNVC: 2

8 Mar 2010

5340-37-511-1420
Angle Bracket

375111420
H3126002: RNCC: 3 | RNVC: 2
H3126002: RNCC: 5 | RNVC: 2

31 Aug 2004

5340-37-516-8846
Hoisting Link

375168846
80096062: RNCC: 3 | RNVC: 2
80096062: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-502-7791
Section Block Clamp

375027791
60085528: RNCC: 3 | RNVC: 2

13 Jul 1994

5340-37-519-6916
Spacing Threaded Standoff

375196916
A20008703: RNCC: 3 | RNVC: 2
A20008703: RNCC: 5 | RNVC: 2

5 Jul 2010

5340-37-522-4633
Mounting Bracket

375224633
A60046548-2: RNCC: 3 | RNVC: 2

9 Jan 2012

5340-37-522-8209
Mounting Bracket

375228209
KDS 5895-4032: RNCC: 2 | RNVC: 1
50139712: RNCC: 3 | RNVC: 2
50139712: RNCC: 5 | RNVC: 2

13 Mar 2012

5340-37-518-6814
Mounting Bracket

375186814
A60046288: RNCC: 3 | RNVC: 2
KDS 1240-4004: RNCC: 4 | RNVC: 1
A60046288: RNCC: 5 | RNVC: 2

24 Sep 2009

5340-37-517-8586
Dust And Moisture Seal Protective Plug

375178586
20028205: RNCC: 3 | RNVC: 1
20028087: RNCC: 3 | RNVC: 1
MB600-040: RNCC: 5 | RNVC: 1
20028205: RNCC: 5 | RNVC: 1
MB600-040: RNCC: 5 | RNVC: 1

30 Jun 2009

5340-37-526-3341
Doorknob

375263341
KA-606-2K: RNCC: 3 | RNVC: 2

8 Jul 2013

5340-37-522-8886
Lock Bar

375228886
KDS 5895-4032: RNCC: 2 | RNVC: 1
50141041: RNCC: 3 | RNVC: 2
50141041: RNCC: 5 | RNVC: 2

27 Mar 2012

5340-37-004-1331
Groove Pulley

370041331
5340-97-004-1331: RNCC: 2 | RNVC: 2
5-20584-00006: RNCC: 3 | RNVC: 2
5-20584-00006: RNCC: 3 | RNVC: 2
5-20584-00006: RNCC: 3 | RNVC: 9
2320-1001-5: RNCC: 3 | RNVC: 9

23 Nov 1987

5340-37-517-4021
Clamp

375174021
7940-33-11-00: RNCC: 5 | RNVC: 9
7940-33-11-00: RNCC: 5 | RNVC: 9

4 Jun 2009

5340-37-524-3268
Mounting Bracket

375243268
KDS 5880-4001: RNCC: 2 | RNVC: 1
A40001661: RNCC: 3 | RNVC: 2
A40001661: RNCC: 5 | RNVC: 2

28 Aug 2012

5340-37-518-0522
Mounting Bracket

375180522
WF213401-01: RNCC: 3 | RNVC: 2

6 Jul 2009

5340-37-520-6626
Mounting Plate

375206626
KDS 1005-1389: RNCC: 2 | RNVC: 1
Q55607037: RNCC: 3 | RNVC: 2
Q55607037: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-505-5320
X-Shaft Rotation As

375055320
Q55016147: RNCC: 3 | RNVC: 2

18 Feb 1999

5340-37-521-6313
Mounting Bracket

375216313
A60014835: RNCC: 3 | RNVC: 2
A60014835: RNCC: 5 | RNVC: 2

21 Jul 2011

5340-37-505-0265
Angle Bracket

375050265
60097311: RNCC: 3 | RNVC: 2
60097311: RNCC: 5 | RNVC: 2

19 Feb 1998

5340-37-510-4315
Carr Cover Assembly

375104315
Q65051809: RNCC: 3 | RNVC: 2

16 Feb 2004

5340-37-526-5799
Mounting Bracket

375265799
81077611: RNCC: 3 | RNVC: 2
81077611: RNCC: 5 | RNVC: 2

5 Aug 2013

5340-37-510-2453
Bracket Assembly

8 Dec 2003

5340-37-512-5167
Door Handle

375125167
Q65083570: RNCC: 3 | RNVC: 2
Q65083570: RNCC: 3 | RNVC: 2

2 Sep 2005

5340-37-520-3595
Access Cover

375203595
50156297: RNCC: 3 | RNVC: 2
50156297: RNCC: 5 | RNVC: 2

26 Nov 2010

5340-37-515-7441
Access Cover

375157441
83014016: RNCC: 3 | RNVC: 2
83014016: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-524-0359
Mounting Bracket

375240359
60833555: RNCC: 3 | RNVC: 2
60833555: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-37-500-4301
Access Cover

375004301
1055-1018-1: RNCC: 5 | RNVC: 9
20016322: RNCC: 5 | RNVC: 9

17 May 1989

5340-37-502-5789
Cushioning Pad

375025789
60722086: RNCC: 3 | RNVC: 2
60722086: RNCC: 5 | RNVC: 2

14 Jan 1994

5340-37-504-9506
Pipe Hanger

375049506
60082481: RNCC: 3 | RNVC: 2
60082481: RNCC: 5 | RNVC: 2

10 Dec 1997

5340-37-510-3368
Cushioning Pad

375103368
81045170: RNCC: 3 | RNVC: 2
81045170: RNCC: 5 | RNVC: 9

6 Jan 2004

5340-37-525-0163
Block Clamp

375250163
91014372: RNCC: 3 | RNVC: 2
91014372: RNCC: 5 | RNVC: 2

10 Dec 2012

5340-37-512-4910
Retaining Strap

375124910
85TP1017A286BD: RNCC: 3 | RNVC: 2
85TP1017: RNCC: 5 | RNVC: 1
85TP1017A286BD: RNCC: 5 | RNVC: 2

31 Aug 2005

5340-37-504-0891
Electrical-Mec Post

375040891
KDS 5820-1288: RNCC: 2 | RNVC: 1
50085002: RNCC: 3 | RNVC: 2
50085002-4: RNCC: 3 | RNVC: 2

10 May 1996

5340-37-521-3014
Spacing Threaded Standoff

375213014
SBD-S3-50: RNCC: 3 | RNVC: 2

13 May 2011

5340-37-511-2813
Fixing Block

375112813
81045186: RNCC: 3 | RNVC: 2
81045186: RNCC: 5 | RNVC: 2

16 Oct 2004

5340-37-508-0281
Flange

375080281
80266706: RNCC: 5 | RNVC: 2

7 Sep 2001

5340-37-503-1292
Rubber Bumper

375031292
60702546: RNCC: 3 | RNVC: 2
60702546: RNCC: 5 | RNVC: 2

24 Nov 1994

5340-37-516-3516
Door Button

375163516
83012069: RNCC: 3 | RNVC: 2
83012069: RNCC: 5 | RNVC: 2

13 Nov 2008

5340-37-520-0212
Mounting Bracket

375200212
10301.4171.012: RNCC: 3 | RNVC: 2

24 Sep 2010

5340-37-526-5286
Lock-Release Lever

375265286
DAV040104-01: RNCC: 3 | RNVC: 2
DAV040104: RNCC: 5 | RNVC: 2

29 Jul 2013

5340-37-519-3776
Mounting Bracket

375193776
A20007276: RNCC: 3 | RNVC: 2
A20007276: RNCC: 5 | RNVC: 2

24 Mar 2010

5340-37-520-4094
Access Cover

375204094
A60025191: RNCC: 3 | RNVC: 2
A60025191: RNCC: 5 | RNVC: 2

6 Dec 2010

5340-37-502-6531
Bridge Clamp

375026531
60074454: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-37-514-0936
Cover Assembly

375140936
50144933: RNCC: 3 | RNVC: 2
50144933: RNCC: 5 | RNVC: 2

27 Sep 2007

5340-37-511-7872
Angle Bracket

375117872
Q85012397: RNCC: 3 | RNVC: 2
Q85012397: RNCC: 5 | RNVC: 2

4 Apr 2005

5340-37-520-3985
Angle Bracket

375203985
A60023735: RNCC: 3 | RNVC: 2
A60023735: RNCC: 5 | RNVC: 2

6 Dec 2010

5340-37-526-2595
Latch Bar

375262595
AD81300011: RNCC: 3 | RNVC: 2
AD81300011: RNCC: 5 | RNVC: 2

18 Jun 2013

5340-37-514-4942

5340-37-509-9386

5340-37-514-5582

5340-37-512-4149
Bow Handle

375124149
85GA1230-007: RNCC: 3 | RNVC: 2
85GA1230-007: RNCC: 5 | RNVC: 2

11 Aug 2005

5340-37-523-7862
Mounting Plate

375237862
A60078374: RNCC: 3 | RNVC: 2
A60078374: RNCC: 5 | RNVC: 2

18 Jul 2012

5340-37-524-1019
Mounting Bracket

375241019
A60077318: RNCC: 3 | RNVC: 2
A60077318: RNCC: 5 | RNVC: 2

10 Aug 2012

5340-37-512-5833
Access Cover

375125833
80054848: RNCC: 3 | RNVC: 2
80054848: RNCC: 5 | RNVC: 2

15 Sep 2005

5340-37-510-9362
Angle Bracket

375109362
Q65059614: RNCC: 3 | RNVC: 2
Q65059614-1: RNCC: 5 | RNVC: 1
Q65059614-1: RNCC: 5 | RNVC: 2

20 Jul 2004

5340-37-512-2536
Handle Grip

375122536
85B6242-055: RNCC: 3 | RNVC: 2
85B6242-055: RNCC: 5 | RNVC: 2

12 Jul 2005

5340-37-505-6377
Mounting Bracket

375056377
Q45015689: RNCC: 3 | RNVC: 2

16 Apr 1999

5340-37-514-9758
Access Cover

375149758
50140584: RNCC: 3 | RNVC: 2
50140584: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-37-518-5275
Dust And Moisture Seal Protective Cover

375185275
60445340: RNCC: 3 | RNVC: 2
60445340: RNCC: 5 | RNVC: 2

10 Aug 2009

5340-37-510-6152

5340-37-526-0584
Lock Bolt

375260584
PK7038-039: RNCC: 3 | RNVC: 2

22 Apr 2013

5340-37-505-9654
Spline Protec Cover

375059654
93008772: RNCC: 5 | RNVC: 9
93008772: RNCC: 5 | RNVC: 9

19 Jul 1999

5340-37-522-6457
Dust And Moisture Seal Protective Cover

375226457
50143625: RNCC: 3 | RNVC: 2
50143625: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-37-522-6597
Handle Lock Bar

375226597
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81252309: RNCC: 3 | RNVC: 2
A8125230901: RNCC: 3 | RNVC: 2
A8125230901: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-37-522-4073
Mounting Bracket

375224073
50138635: RNCC: 3 | RNVC: 2
50138635: RNCC: 5 | RNVC: 2

27 Dec 2011

5340-37-515-6228
Access Cover

375156228
91029653: RNCC: 3 | RNVC: 2
91029653: RNCC: 5 | RNVC: 2

1 Aug 2008

5340-37-515-9409
Cushioning Pad

375159409
A40001278: RNCC: 3 | RNVC: 2
A40001278: RNCC: 5 | RNVC: 2

17 Oct 2008

5340-37-514-2977
Fixed Support

375142977
50140365: RNCC: 3 | RNVC: 2
50140365: RNCC: 5 | RNVC: 2

14 Nov 2007

5340-37-519-6275
Mounting Bracket

375196275
A20009053: RNCC: 3 | RNVC: 2
A20009053: RNCC: 5 | RNVC: 2

15 Jun 2010

5340-37-504-3291
Plate

375043291
50097028: RNCC: 5 | RNVC: 9

1 Sep 1996

5340-37-518-0890
Access Cover

375180890
60826026: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826026: RNCC: 5 | RNVC: 2

10 Jul 2009

5340-37-524-6782
Access Cover

375246782
A60045899: RNCC: 3 | RNVC: 2
A60045899: RNCC: 5 | RNVC: 2

16 Oct 2012

5340-37-515-9395
Safety Cable Kit

375159395
Q25021840: RNCC: 3 | RNVC: 2
Q25021840: RNCC: 5 | RNVC: 2

17 Oct 2008

5340-37-509-1233
Access Cover

375091233
Q65035083: RNCC: 3 | RNVC: 2
Q65035083: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-37-509-4503
Mounting Plate

375094503
Q55604134: RNCC: 3 | RNVC: 2
Q55604134: RNCC: 5 | RNVC: 9

6 Jan 2003

5340-37-525-5487
Mounting Bracket

375255487
A50040334: RNCC: 3 | RNVC: 2
A50040334: RNCC: 5 | RNVC: 2

6 Feb 2013

5340-37-525-2658
Mounting Bracket

375252658
A60046161: RNCC: 3 | RNVC: 2
A60046161: RNCC: 5 | RNVC: 2

15 Jan 2013

5340-37-506-0735
Retaining Band

375060735
80064626: RNCC: 3 | RNVC: 2
80064626: RNCC: 5 | RNVC: 2

4 Aug 1999

5340-37-506-6267
Butt Hinge

375066267
Q75012435: RNCC: 3 | RNVC: 2

8 Nov 1999

5340-37-525-4636
Mounting Bracket

375254636
SM60011049: RNCC: 3 | RNVC: 2

29 Jan 2013

5340-37-526-4180
Seal Retaining Plate

375264180
91035443: RNCC: 3 | RNVC: 2
91035443: RNCC: 5 | RNVC: 2

16 Jul 2013

5340-37-525-1941
Mounting Plate

375251941
91045110: RNCC: 3 | RNVC: 2
91045110: RNCC: 5 | RNVC: 2

10 Jan 2013

5340-37-555-8535
Refrigerating Flang

375558535
8RP-002-00-01: RNCC: 5 | RNVC: 1

22 Mar 2004

5340-37-513-2826
Catch Strike

375132826
DMT666-0002: RNCC: 3 | RNVC: 2
DMT666-0006: RNCC: 5 | RNVC: 2

16 Nov 2006

5340-37-521-7082
Angle Bracket

375217082
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81069314: RNCC: 3 | RNVC: 2
A81069314-01: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-37-506-4847
Mounting Bracket

375064847
KDS 2350-1024: RNCC: 2 | RNVC: 1
40006425: RNCC: 3 | RNVC: 2

21 Sep 1999

5340-37-519-1639
Angle Bracket

375191639
81362657: RNCC: 3 | RNVC: 2
81362657: RNCC: 5 | RNVC: 2

21 Jan 2010

5340-37-510-7687
Mounting Bracket

375107687
80075954: RNCC: 3 | RNVC: 2
80075954: RNCC: 5 | RNVC: 9

12 Jun 2004

5340-37-515-7673
Mounting Plate

375157673
83014715: RNCC: 3 | RNVC: 2
83014715: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-512-4466
Angle Bracket

375124466
20164893: RNCC: 3 | RNVC: 2
20164893: RNCC: 5 | RNVC: 2

24 Aug 2005

5340-37-512-5313
Body Fixati Bracket

375125313
20164818: RNCC: 3 | RNVC: 2
20164818: RNCC: 5 | RNVC: 2

2 Sep 2005

5340-37-512-9295
Front Charge Guide

375129295
Q25025592-1: RNCC: 3 | RNVC: 2
Q25025592: RNCC: 5 | RNVC: 1
Q25025592-1: RNCC: 5 | RNVC: 2

16 Mar 2006

5340-37-520-8054
Angle Bracket

375208054
A81137320: RNCC: 3 | RNVC: 2
A8113732001: RNCC: 3 | RNVC: 2
A8113732001: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-37-514-9558
Block

375149558
50139381: RNCC: 3 | RNVC: 2
50139381: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-37-513-1980
Mounting Bracket

375131980
80016785: RNCC: 3 | RNVC: 2
80016785: RNCC: 5 | RNVC: 2

4 Sep 2006

5340-37-510-0957

5340-37-517-4240
Bracket

375174240
61531116: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61531116: RNCC: 5 | RNVC: 2

5 Jun 2009

5340-37-519-2696
Manual Control Handle

375192696
599-41118: RNCC: 3 | RNVC: 2
599-41118: RNCC: 5 | RNVC: 2

25 Feb 2010

5340-37-512-5202
Side Armor Glass As

375125202
Q65083731: RNCC: 3 | RNVC: 2
Q65083731: RNCC: 3 | RNVC: 2
Q65083731-1: RNCC: 3 | RNVC: 2

2 Sep 2005

5340-37-512-3450
Angle Bracket

375123450
85D1364-051: RNCC: 3 | RNVC: 2
85D1364-051: RNCC: 5 | RNVC: 2

28 Jul 2005

5340-37-515-2472
Mounting Bracket

375152472
Q45020778: RNCC: 3 | RNVC: 2
Q45020778: RNCC: 5 | RNVC: 2

16 May 2008

5340-37-515-3404
Block

375153404
50138655: RNCC: 3 | RNVC: 2
50138655: RNCC: 5 | RNVC: 2

6 Jun 2008

5340-37-523-2251
Access Cover

375232251
A8003631701: RNCC: 3 | RNVC: 2
A8003631701: RNCC: 5 | RNVC: 2
A80036317: RNCC: D | RNVC: 9

18 May 2012

5340-37-509-2476
Balance Plate

375092476
80267473: RNCC: 3 | RNVC: 2
80267473: RNCC: 5 | RNVC: 2

26 Sep 2002

5340-37-504-4290

5340-37-520-6273
Mounting Plate

375206273
A20017506: RNCC: 3 | RNVC: 2
A20017506: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-522-0212
Lock Bar

375220212
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81506318: RNCC: 3 | RNVC: 2
A81506318-01: RNCC: 3 | RNVC: 2
A81506318-01: RNCC: 5 | RNVC: 2

1 Nov 2011

5340-37-521-8651
Access Cover

375218651
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81087416: RNCC: 3 | RNVC: 2
A81087416-01: RNCC: 5 | RNVC: 2

20 Sep 2011

5340-37-525-1248
Roller Holder

375251248
SM-MV-M12X65: RNCC: 3 | RNVC: 2

4 Jan 2013

5340-37-523-9446
Mounting Plate

375239446
H79355-01-5: RNCC: 3 | RNVC: 2

3 Aug 2012

5340-37-512-2748
Mounting Plate

375122748
85E6220-072: RNCC: 3 | RNVC: 2
85E6220-071: RNCC: 3 | RNVC: 2

14 Jul 2005

5340-37-504-8447

5340-37-511-9331
Angle Bracket

375119331
85L1201-303: RNCC: 3 | RNVC: 2
85L1201-303: RNCC: 5 | RNVC: 2

9 May 2005

5340-37-522-4777
Mounting Plate

375224777
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85E2320-672: RNCC: 3 | RNVC: 2
85E2320-672: RNCC: 5 | RNVC: 2
85E2320-671: RNCC: D | RNVC: 9

11 Jan 2012

5340-37-519-3690
Under Cover

375193690
82291455: RNCC: 3 | RNVC: 2
82291455-01: RNCC: 5 | RNVC: 2

23 Mar 2010

5340-37-504-3540
Angle Bracket

375043540
50088973: RNCC: 5 | RNVC: 9

6 Sep 1996

5340-37-511-4614
Moun Plate Assembly

375114614
Q55111566: RNCC: 3 | RNVC: 2
Q55111566: RNCC: 5 | RNVC: 2

3 Jan 2005

5340-37-507-0307
Access Cover

375070307
95001921: RNCC: 3 | RNVC: 2

28 Mar 2000

5340-37-507-1986
Mounting Plate

375071986
20109121: RNCC: 5 | RNVC: 9

13 Jul 2000

5340-37-515-6326
Mounting Plate

375156326
91025201: RNCC: 3 | RNVC: 2
91025201: RNCC: 5 | RNVC: 2

6 Aug 2008

5340-37-524-9921
Mounting Bracket

375249921
61527258: RNCC: 3 | RNVC: 2
61527258: RNCC: 5 | RNVC: 2

5 Dec 2012

5340-37-519-2201
Mounting Plate

375192201
81363251: RNCC: 3 | RNVC: 2
81363251: RNCC: 5 | RNVC: 2

9 Feb 2010

5340-37-512-0436
Double Angle Bracket

375120436
85H1531-033: RNCC: 3 | RNVC: 2
85H1531-033: RNCC: 5 | RNVC: 2

3 Jun 2005

5340-37-520-2518
Retaining Band

375202518
AD51000028: RNCC: 3 | RNVC: 2
AD51000028: RNCC: 5 | RNVC: 2

9 Nov 2010

5340-37-511-2568
Access Cover

375112568
Q65080025: RNCC: 3 | RNVC: 2
Q65080025: RNCC: 5 | RNVC: 2

24 Sep 2004

5340-37-520-3104
Access Cover

375203104
A60024155: RNCC: 3 | RNVC: 2
A60024155: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-37-519-2796
Mounting Bracket

375192796
81364279: RNCC: 3 | RNVC: 2
81364279: RNCC: 5 | RNVC: 2

5 Mar 2010

5340-37-006-4079
Ringsnap

370064079
5340370064079: RNCC: 3 | RNVC: 2

27 Nov 1995

5340-37-519-1791
Rod End Locking Retainer

375191791
81362061: RNCC: 3 | RNVC: 2
81362061: RNCC: 5 | RNVC: 2

22 Jan 2010

5340-37-519-0283
Angle Bracket Set

375190283
Q55020010: RNCC: 3 | RNVC: 2
Q55020010: RNCC: 5 | RNVC: 2

10 Dec 2009

5340-37-501-2145
Dust And Moisture Seal Protective Plug

375012145
60730099: RNCC: 3 | RNVC: 2
60730099: RNCC: 5 | RNVC: 2

12 Jan 1989

5340-37-520-7823
Angle Bracket

375207823
A8102235101: RNCC: 3 | RNVC: 2
A81022351: RNCC: 3 | RNVC: 2
A8102235101: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-37-518-5422
Access Cover

375185422
A20007405: RNCC: 3 | RNVC: 2
A20007405: RNCC: 5 | RNVC: 2

17 Aug 2009

5340-37-501-2061
Block

375012061
60704246: RNCC: 3 | RNVC: 2
60704246: RNCC: 5 | RNVC: 2

23 Dec 1988

5340-37-511-6228
Angle Bracket

375116228
85Y1089-033: RNCC: 3 | RNVC: 2
85Y1089-033: RNCC: 5 | RNVC: 2

4 Mar 2005

5340-37-526-0379
Access Cover

375260379
CSP-NHGH2-101-1: RNCC: 3 | RNVC: 2
NHGH2-101.1: RNCC: 5 | RNVC: 2

17 Apr 2013

5340-37-526-0219
Access Cover

375260219
KDS 2350-4008: RNCC: 2 | RNVC: 2
A60075492: RNCC: 5 | RNVC: 2
A60075492: RNCC: D | RNVC: 9

15 Apr 2013

5340-37-518-5699
Mounting Bracket

375185699
WF393138-01: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-37-524-0873
Rear Panel

375240873
91039473: RNCC: 3 | RNVC: 2
91039473: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-508-8971
Mount Support Bar

375088971
Q65013653: RNCC: 3 | RNVC: 2

8 May 2002

5340-37-519-1693
Access Cover

375191693
81361758: RNCC: 3 | RNVC: 2
81361758: RNCC: 5 | RNVC: 2

22 Jan 2010

5340-37-524-1941
Mounting Plate

375241941
A60079303: RNCC: 3 | RNVC: 2
A60079303: RNCC: 5 | RNVC: 2

20 Aug 2012

5340-37-502-9283
Stoper

375029283
60308829: RNCC: 3 | RNVC: 2

7 Oct 1994

5340-37-514-5456
Mounting Plate

375145456
50135181: RNCC: 3 | RNVC: 2
50135181: RNCC: 5 | RNVC: 2

20 Dec 2007

5340-37-511-8524
Rim Latch

375118524
85W1520-037: RNCC: 3 | RNVC: 2
85W1520-037: RNCC: 5 | RNVC: 2

16 Apr 2005

5340-37-511-7483
Angle Bracket

375117483
85L5163-311: RNCC: 3 | RNVC: 2
85L5163-301: RNCC: 3 | RNVC: 9
85L5163-311: RNCC: 5 | RNVC: 2
85L5163-301: RNCC: 5 | RNVC: 9

29 Mar 2005

5340-37-501-3923
Mounting Plate

375013923
40003753: RNCC: 3 | RNVC: 2
40003753: RNCC: 5 | RNVC: 2
1230-1006: RNCC: 5 | RNVC: 9

18 Aug 1989

5340-37-506-3036
Butt Hinge

375063036
KDS 1510-1003: RNCC: 2 | RNVC: 1
81576769: RNCC: 5 | RNVC: 9
81576769-02: RNCC: 5 | RNVC: 9

20 Aug 1999

5340-37-510-7031
Mounting Plate

375107031
70020476: RNCC: 3 | RNVC: 2
70020476: RNCC: 5 | RNVC: 2

1 May 2004

5340-37-516-8727
Access Cover

375168727
80095576: RNCC: 3 | RNVC: 2
80095576: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-524-5258
Headless Straight Rod

375245258
Q65303013: RNCC: 3 | RNVC: 2
Q65303013: RNCC: 5 | RNVC: 2

24 Sep 2012

5340-37-525-0175
Block Clamp

375250175
91014374: RNCC: 3 | RNVC: 2
91014374: RNCC: 5 | RNVC: 2

10 Dec 2012

5340-37-513-2128
Mounting Bracket

375132128
60309166: RNCC: 3 | RNVC: 2
60309166: RNCC: 5 | RNVC: 2

4 Oct 2006

5340-37-524-0961
Heater Assemb Cover

375240961
91039804: RNCC: 3 | RNVC: 2
91039804: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-515-9519
Mounting Bracket

375159519
91025862: RNCC: 3 | RNVC: 2
91025862: RNCC: 5 | RNVC: 2

20 Oct 2008

5340-37-524-7646
Doorknob

375247646
91034804: RNCC: 3 | RNVC: 2
91034804: RNCC: 5 | RNVC: 2

26 Oct 2012

5340-37-512-9402
Mounting Bracket

375129402
Q25025713: RNCC: 3 | RNVC: 2
Q25025713: RNCC: 5 | RNVC: 2

21 Mar 2006

5340-37-524-8638
Bow Handle

375248638
A-1221-1: RNCC: 3 | RNVC: 2

19 Nov 2012

5340-37-506-0357
Mounting Plate

375060357
KDS 1025-1149: RNCC: 2 | RNVC: 1
20026458: RNCC: 3 | RNVC: 2

30 Jul 1999

5340-37-505-8658
Access Cover

375058658
KDS 2350-1024: RNCC: 2 | RNVC: 1
60344007: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-37-503-2787
Rim Clenching Clamp

375032787
KDS 3805-1024: RNCC: 2 | RNVC: 1
60314506: RNCC: 3 | RNVC: 2

30 Jul 1996

5340-37-522-1998
Mounting Plate

375221998
KDS 5895-4031: RNCC: 2 | RNVC: 1
50136617: RNCC: 3 | RNVC: 2
50136617: RNCC: 5 | RNVC: 2

28 Nov 2011

5340-37-525-4837
Mounting Bracket

375254837
91044887-02: RNCC: 3 | RNVC: 2
91044887-02: RNCC: 5 | RNVC: 2
91044887: RNCC: D | RNVC: 9

31 Jan 2013

5340-37-504-6221
Rod End Connector

375046221
60043254: RNCC: 3 | RNVC: 2
60043254: RNCC: 5 | RNVC: 2

28 Apr 1997

5340-37-511-4648
Recess Handle

375114648
Q55111438: RNCC: 3 | RNVC: 2
Q55111438: RNCC: 5 | RNVC: 2

4 Jan 2005

5340-37-515-0545
Mounting Plate

375150545
50136061: RNCC: 3 | RNVC: 2
50136061: RNCC: 5 | RNVC: 2

17 Apr 2008

5340-37-510-9642
Cover Assembly

375109642
Q55606363: RNCC: 3 | RNVC: 1
Q55606363: RNCC: 3 | RNVC: 1

22 Jul 2004

5340-37-522-5958
Mounting Bracket

375225958
50134502: RNCC: 3 | RNVC: 2
50134502: RNCC: 5 | RNVC: 2

6 Feb 2012

5340-37-502-5234
Angle Bracket

375025234
60052463: RNCC: 3 | RNVC: 2
60052463: RNCC: 3 | RNVC: 2

10 Nov 1993

5340-37-524-2808
Top Capacitor Mount

375242808
91038270: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-37-508-0625
Support

375080625
80267049: RNCC: 5 | RNVC: 2

17 Sep 2001

5340-37-515-7576
Access Cover

375157576
83014378: RNCC: 3 | RNVC: 2
83014378: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-510-4185
Oil Plug

375104185
20111076: RNCC: 3 | RNVC: 2
20111076: RNCC: 3 | RNVC: 2

13 Feb 2004

5340-37-508-0391
Rod End Clevis

375080391
80266613: RNCC: 5 | RNVC: 2

10 Sep 2001

5340-37-511-2381
Ringer Hanger

375112381
Q65079901: RNCC: 3 | RNVC: 2
Q65079901: RNCC: 5 | RNVC: 2
Q65079901: RNCC: 5 | RNVC: 2

19 Sep 2004

5340-37-526-7967
Mounting Plate

375267967
A90028448: RNCC: 3 | RNVC: 2
A90028448: RNCC: 5 | RNVC: 2

3 Sep 2013

5340-37-512-9512
Mounting Bracket

375129512
Q25026265: RNCC: 3 | RNVC: 2
Q25026265: RNCC: 5 | RNVC: 2

24 Mar 2006

5340-37-521-2880
Access Cover

375212880
KDS4230-4001: RNCC: 2 | RNVC: 1
Q75013103: RNCC: 3 | RNVC: 2
Q75013103: RNCC: 5 | RNVC: 2

12 May 2011

5340-37-503-3189
Cover

375033189
KDS 1055-2037: RNCC: 2 | RNVC: 1
20025630: RNCC: 3 | RNVC: 2

23 Jan 1996

5340-37-525-7622
Mounting Plate

375257622
3M-158080: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-37-504-0885
Bow Handle

375040885
50085175: RNCC: 3 | RNVC: 2

8 May 1996

5340-37-511-6826
Clamp Mount Assembl

375116826
Q55110502: RNCC: 3 | RNVC: 2
Q55110502: RNCC: 5 | RNVC: 2

18 Mar 2005

5340-37-525-1842
Mounting Plate

375251842
91044860: RNCC: 3 | RNVC: 2
91044860: RNCC: 5 | RNVC: 2

10 Jan 2013

5340-37-521-9328
Mounting Bracket

375219328
KDS 2350-4003: RNCC: 2 | RNVC: 1
61519014: RNCC: 3 | RNVC: 2
61519014: RNCC: 5 | RNVC: 2

26 Sep 2011

5340-37-506-4837
Bracket Assembly

375064837
KDS 2350-1024: RNCC: 2 | RNVC: 1
60340610: RNCC: 3 | RNVC: 2

21 Sep 1999

5340-37-516-5358
Mounting Bracket

375165358
20030105: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030105: RNCC: 5 | RNVC: 2

17 Dec 2008

5340-37-510-4591
Access Cover

375104591
60428037: RNCC: 3 | RNVC: 2

26 Feb 2004

5340-37-523-4478
Mounting Plate

375234478
A60078903: RNCC: 3 | RNVC: 2
A60078903: RNCC: 5 | RNVC: 2

13 Jun 2012

5340-37-519-3069
Mounting Bracket

375193069
81365153: RNCC: 3 | RNVC: 2
81365153: RNCC: 5 | RNVC: 2

10 Mar 2010

5340-37-502-9234
Plate

375029234
60309053: RNCC: 3 | RNVC: 2

6 Oct 1994

5340-37-513-2132
Interior Drawer

375132132
60309174: RNCC: 3 | RNVC: 2
60309174: RNCC: 5 | RNVC: 2

4 Oct 2006

5340-37-513-5330
Mounting Bracket

375135330
60311774: RNCC: 3 | RNVC: 2
60311774: RNCC: 5 | RNVC: 2

9 Mar 2007

5340-37-514-2614
Work Frame Assembly

375142614
50129777: RNCC: 3 | RNVC: 2
50129777: RNCC: 5 | RNVC: 2

8 Nov 2007

5340-37-510-7684
Double Angle Bracket

375107684
80075951: RNCC: 3 | RNVC: 2
80075951: RNCC: 5 | RNVC: 9

12 Jun 2004

5340-37-503-1419
Heater Screen Guard

375031419
60734562: RNCC: 3 | RNVC: 2
60734562: RNCC: 5 | RNVC: 2

28 Nov 1994

5340-37-525-2000
Mounting Bracket

375252000
91046637: RNCC: 3 | RNVC: 2
91046637: RNCC: 5 | RNVC: 2

10 Jan 2013

5340-37-502-5170
Plug Guard

375025170
60080227: RNCC: 3 | RNVC: 2
60080227: RNCC: 3 | RNVC: 2

8 Nov 1993

5340-37-522-4067
Mounting Bracket

375224067
50138472: RNCC: 3 | RNVC: 2
50138472: RNCC: 5 | RNVC: 2

27 Dec 2011

5340-37-527-1595
Mounting Plate

375271595
A50058798: RNCC: 3 | RNVC: 2
A50058798: RNCC: 5 | RNVC: 2

15 Oct 2013

5340-37-510-8528
Double Angle Bracket

375108528
Q55026845: RNCC: 3 | RNVC: 1
Q55026845-1: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-37-515-2312
Mounting Bracket

375152312
Q45020718: RNCC: 3 | RNVC: 2
Q45020718: RNCC: 5 | RNVC: 2

14 May 2008

5340-37-517-6895
Access Hole Frame

375176895
60821765: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60821765: RNCC: 5 | RNVC: 2

25 Jun 2009

5340-37-506-1116
Dust And Moisture Seal Protective Cap

375061116
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341458: RNCC: 3 | RNVC: 2

7 Aug 1999

5340-37-507-4151
Manual Control Lever

375074151
60335972: RNCC: 3 | RNVC: 2
60335972: RNCC: 5 | RNVC: 2

4 Oct 2000

5340-37-513-3510
Dust And Moisture Seal Protective Cap

375133510
Q55401421: RNCC: 3 | RNVC: 2
Q55401421: RNCC: 5 | RNVC: 2

19 Dec 2006

5340-37-524-2935
Left Panel

375242935
91038468: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-37-504-6264
Cushioning Pad

375046264
60044371: RNCC: 3 | RNVC: 2
60044371: RNCC: 5 | RNVC: 2

2 May 1997

5340-37-525-7451
Window Retaining Plate

375257451
N51005922: RNCC: 3 | RNVC: 2
N51005922: RNCC: 5 | RNVC: 2

13 Mar 2013

5340-37-525-2341
Mounting Plate

375252341
91046126: RNCC: 3 | RNVC: 2
91046126: RNCC: 5 | RNVC: 2

14 Jan 2013

5340-37-514-5613
Mounting Plate

375145613
Q25026290: RNCC: 3 | RNVC: 2
Q25026290: RNCC: 5 | RNVC: 2

29 Dec 2007

5340-37-510-2409
Functional Control

375102409
Q55017386: RNCC: 2 | RNVC: 2
Q55017386: RNCC: 3 | RNVC: 2

8 Dec 2003

5340-37-510-7565
Bridge Clamp

375107565
AD20400023: RNCC: 3 | RNVC: 2
20400023: RNCC: 3 | RNVC: 2
AD20400023: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-37-516-8936
Access Cover

375168936
80096395: RNCC: 3 | RNVC: 2
80096395: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-523-8258
Angle Bracket

375238258
A60024070: RNCC: 3 | RNVC: 2
A60024070: RNCC: 5 | RNVC: 2

19 Jul 2012

5340-37-520-7704
Angle Bracket

375207704
A81140301: RNCC: 3 | RNVC: 2
A8114030101: RNCC: 3 | RNVC: 2
A8114030101: RNCC: 5 | RNVC: 2

9 Feb 2011

5340-37-526-6737
Mounting Plate

375266737
A90027208: RNCC: 3 | RNVC: 2
A90027208: RNCC: 5 | RNVC: 2

20 Aug 2013

5340-37-507-6820
Plate Retainer

375076820
60324666: RNCC: 3 | RNVC: 2
60324666: RNCC: 5 | RNVC: 2

15 Feb 2001

5340-37-517-6074
Kit

375176074
020054-051: RNCC: 5 | RNVC: 1

22 Jun 2009

5340-37-520-2388
Mounting Bracket

375202388
A60026072: RNCC: 3 | RNVC: 2
A60026072: RNCC: 5 | RNVC: 2

8 Nov 2010

5340-37-522-2976
Mounting Bracket

375222976
50137799: RNCC: 3 | RNVC: 2
50137799: RNCC: 5 | RNVC: 2

15 Dec 2011

5340-37-503-4232

5340-37-503-1529

5340-37-518-0576
Tee Hinge

375180576
60826027: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826027: RNCC: 5 | RNVC: 2

7 Jul 2009

5340-37-525-6633
Door Button

375256633
KDS 1210-4005: RNCC: 2 | RNVC: 1
91025223: RNCC: 3 | RNVC: 2
91025223: RNCC: 5 | RNVC: 2

25 Feb 2013

5340-37-523-1079
Clamp Bolt Assembly

375231079
KDS 5895-4032: RNCC: 2 | RNVC: 1
50140712: RNCC: 3 | RNVC: 2
50140712: RNCC: 5 | RNVC: 2

2 May 2012

5340-37-505-3915
Mounting Plate

375053915
KDS 1375-1050: RNCC: 2 | RNVC: 1
KDS-1375-1050: RNCC: 2 | RNVC: 1
Q75011417: RNCC: 3 | RNVC: 2
KJM-2016: RNCC: 5 | RNVC: 2

4 Nov 1998

5340-37-518-6702
Catch Strike

375186702
60822801: RNCC: 3 | RNVC: 2
KDS 1240-4004: RNCC: 4 | RNVC: 1
60822801: RNCC: 5 | RNVC: 2

18 Sep 2009

5340-37-522-4774
Mounting Bracket

375224774
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85Y9801-621: RNCC: 3 | RNVC: 2
85Y9801-621: RNCC: 5 | RNVC: 2

11 Jan 2012

5340-37-510-3250
Cushioning Pad

375103250
81045616: RNCC: 4 | RNVC: 1
81045616-03: RNCC: 5 | RNVC: 9

29 Dec 2003

5340-37-527-0267
Cushioning Pad

375270267
81076708-1: RNCC: 3 | RNVC: 2
81076708-1: RNCC: 5 | RNVC: 2
81076708: RNCC: D | RNVC: 9

8 Oct 2013

5340-37-511-8230
Handle Lever

375118230
Q85012275: RNCC: 3 | RNVC: 1
BKHG 1/4": RNCC: 3 | RNVC: 2
Q85012275: RNCC: 5 | RNVC: 1

8 Apr 2005

5340-37-524-1743
Tran Guide Assembly

375241743
A60079135-2: RNCC: 3 | RNVC: 2
A60079135-2: RNCC: 5 | RNVC: 2
A60079135: RNCC: D | RNVC: 9

16 Aug 2012

5340-37-511-2383
Mounting Plate

375112383
Q65080181-1: RNCC: 3 | RNVC: 2
Q65080181: RNCC: 5 | RNVC: 1
Q65080181-1: RNCC: 5 | RNVC: 2

19 Sep 2004

5340-37-511-6911
L Holdfast Assembly

375116911
Q65079713: RNCC: 3 | RNVC: 2
Q65079713: RNCC: 5 | RNVC: 2

21 Mar 2005

5340-37-524-1042
Door Handle

375241042
A60077315-4: RNCC: 3 | RNVC: 2
A60077315-4: RNCC: 5 | RNVC: 2

13 Aug 2012

5340-37-522-6998
Dust And Moisture Seal Protective Cover

375226998
50143372: RNCC: 3 | RNVC: 2
50143372: RNCC: 5 | RNVC: 2

17 Feb 2012

5340-37-511-1145
Mounting Bracket

375111145
Q65079515: RNCC: 3 | RNVC: 2
Q65079515: RNCC: 5 | RNVC: 2

25 Aug 2004

5340-37-525-2559
Access Cover

375252559
91046152: RNCC: 3 | RNVC: 2
91046152: RNCC: 5 | RNVC: 2

14 Jan 2013

5340-37-526-6743
Mounting Plate

375266743
A90027271: RNCC: 3 | RNVC: 2
A90027271: RNCC: 5 | RNVC: 2

20 Aug 2013

5340-37-508-4363
Housing

375084363
20119060: RNCC: 3 | RNVC: 2

7 Jan 2002

5340-37-511-0011
Loop Clamp

375110011
Q65066963: RNCC: 3 | RNVC: 2
Q65066963: RNCC: 5 | RNVC: 2

27 Jul 2004

5340-37-519-1858
Mounting Bracket

375191858
81362334: RNCC: 3 | RNVC: 2
81362334: RNCC: 5 | RNVC: 2

22 Jan 2010

5340-37-519-2027
Mounting Bracket

375192027
81362865: RNCC: 3 | RNVC: 2
81362865: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-37-504-8511
Mortise Lock Set

375048511
KDS 2320-1023: RNCC: 2 | RNVC: 1
60384351: RNCC: 5 | RNVC: 9
60384351: RNCC: 5 | RNVC: 9

3 Nov 1997

5340-37-526-8972
Lock Bolt

375268972
A80704206-01: RNCC: 3 | RNVC: 2
A80704206-01: RNCC: 5 | RNVC: 2
A80704206: RNCC: D | RNVC: 9

11 Sep 2013

5340-37-506-5207
Loop Clamp

375065207
KDS 2350-1024: RNCC: 2 | RNVC: 1
60027512: RNCC: 3 | RNVC: 2

19 Oct 1999

5340-37-510-9716
Directional C Clamp

375109716
Q55606857: RNCC: 3 | RNVC: 1
Q55606857: RNCC: 3 | RNVC: 2

23 Jul 2004

5340-37-512-1713
Fem Buckle Assembly

375121713
Q65082072: RNCC: 3 | RNVC: 2
Q65082072-1: RNCC: 5 | RNVC: 2

24 Jun 2005

5340-37-515-9661
Dust And Moisture Seal Protective Cover

375159661
A60021384-4: RNCC: 3 | RNVC: 2
A60021384-4: RNCC: 5 | RNVC: 2

20 Oct 2008

5340-37-518-0525
Access Cover

375180525
60827312: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60827312: RNCC: 5 | RNVC: 2

6 Jul 2009

5340-37-518-9515
Angle Bracket

375189515
85L1106-303: RNCC: 3 | RNVC: 2
85L1106-301: RNCC: 5 | RNVC: 1
85L1106-303: RNCC: 5 | RNVC: 2

2 Dec 2009

5340-37-506-6500
Lock-Release Lever

375066500
Q75012538: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-37-516-5192
Rigid Caster

375165192
KSD0908PCI: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-37-510-7013
Dust And Moisture Seal Protective Cover

375107013
60576528: RNCC: 3 | RNVC: 2
60576528: RNCC: 3 | RNVC: 2
60576528: RNCC: 3 | RNVC: 2

1 May 2004

5340-37-519-2021
Mounting Bracket

375192021
81362858: RNCC: 3 | RNVC: 2
81362858: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-37-526-8233
Threaded Rod End

375268233
81078294: RNCC: 3 | RNVC: 2
81078294: RNCC: 5 | RNVC: 2

4 Sep 2013

5340-37-512-1166
Shock Mount Pad

375121166
85M0217-007: RNCC: 3 | RNVC: 2
85M0217-007: RNCC: 5 | RNVC: 2

15 Jun 2005

5340-37-523-4670
Mounting Plate

375234670
A60078871-2: RNCC: 3 | RNVC: 2
A60078871-2: RNCC: 5 | RNVC: 2
A60078871: RNCC: D | RNVC: 9

14 Jun 2012

5340-37-516-8854
Butt Hinge

375168854
80096070: RNCC: 3 | RNVC: 2
80096070: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-511-1148
Cushioning Pad

375111148
60671490: RNCC: 3 | RNVC: 2
60671490-1: RNCC: 5 | RNVC: 2

25 Aug 2004

5340-37-515-2060
Mounting Plate

375152060
KDS 1240-4010: RNCC: 2 | RNVC: 1
Q65021535: RNCC: 3 | RNVC: 2
Q65021535: RNCC: 5 | RNVC: 2

9 May 2008

5340-37-516-8431
Connector Assembly

375168431
60817850: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60817850: RNCC: 5 | RNVC: 2

24 Mar 2009

5340-37-510-6986
Bail Handle

375106986
Q65064284-2: RNCC: 3 | RNVC: 2
Q65064284: RNCC: 3 | RNVC: 2

1 May 2004

5340-37-516-8144
Mounting Bracket

375168144
60817421: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60817421: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-37-519-7757
Mounting Plate

375197757
85B1411-037: RNCC: 3 | RNVC: 2
85B1411-037: RNCC: 5 | RNVC: 2

19 Jul 2010

5340-37-520-6346
Mounting Plate

375206346
A20017700: RNCC: 3 | RNVC: 2
A20017700: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-507-1326
Loop Clamp

375071326
20112631: RNCC: 5 | RNVC: 9

1 Jun 2000

5340-37-507-1313
Fixed Seat Body

375071313
Q55019154: RNCC: 3 | RNVC: 9

1 Jun 2000

5340-37-556-4823
Cover

375564823
10X78X100,B0355: RNCC: 5 | RNVC: 1

30 Mar 2004

5340-37-523-7183
Mounting Bracket

375237183
91043623: RNCC: 3 | RNVC: 2
91043623: RNCC: 5 | RNVC: 2

14 Jul 2012

5340-37-523-0240
Angle Bracket

375230240
50140002: RNCC: 3 | RNVC: 2
50140002: RNCC: 5 | RNVC: 2

10 Apr 2012

5340-37-525-0435
Mounting Plate

375250435
Q65303191: RNCC: 3 | RNVC: 2
Q65303191: RNCC: 5 | RNVC: 2

17 Dec 2012

5340-37-503-6078
Mounting Bracket

375036078
60309094: RNCC: 3 | RNVC: 2

18 Jun 1996

5340-37-510-9052
Support

375109052
Q65066949: RNCC: 3 | RNVC: 2
Q65066949: RNCC: 5 | RNVC: 2

15 Jul 2004

5340-37-513-8213
Rim Clenching Clamp

375138213
322 65: RNCC: 3 | RNVC: 2

4 Jul 2007

5340-37-519-6212
Access Cover

375196212
A20009666: RNCC: 3 | RNVC: 2
A20009666: RNCC: 5 | RNVC: 2

15 Jun 2010

5340-37-520-6738
Mounting Bracket

375206738
92003103: RNCC: 3 | RNVC: 2
92003103: RNCC: 5 | RNVC: 2

18 Jan 2011

5340-37-522-8628
Bow Handle

375228628
A60072611: RNCC: 3 | RNVC: 2
A60072611: RNCC: 5 | RNVC: 2

20 Mar 2012

5340-37-518-4018
Cover

375184018
219-51-SB161: RNCC: 5 | RNVC: 2

28 Jul 2009

5340-37-519-2047
Access Cover

375192047
81362971: RNCC: 3 | RNVC: 2
81362971: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-37-509-2195
Holding Band

375092195
93011531: RNCC: 3 | RNVC: 2
93011531: RNCC: 5 | RNVC: 9
93011531: RNCC: 5 | RNVC: 9

12 Sep 2002

5340-37-524-7949
Latch Assembly

375247949
A60045845: RNCC: 3 | RNVC: 2
A60045845: RNCC: 5 | RNVC: 2

31 Oct 2012

5340-37-005-1292
Ring;Steering Cyli

370051292
5340-97-005-1292: RNCC: 2 | RNVC: 2
70928850: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-517-6519
Angle Bracket

375176519
WF273343-01: RNCC: 3 | RNVC: 2

24 Jun 2009

5340-37-140-0503
Spacer

371400503
KDS 1055-1005: RNCC: 2 | RNVC: 1
KDS1055-1005: RNCC: 2 | RNVC: 2
70009678: RNCC: 3 | RNVC: 2
5340-97-140-0503: RNCC: 3 | RNVC: 2
70009678: RNCC: 5 | RNVC: 2
1055-1005-1: RNCC: 5 | RNVC: 9
70009678: RNCC: 5 | RNVC: 9

13 Mar 1995

5340-37-111-0325
Detent Plunger

371110325
60102137: RNCC: 3 | RNVC: 2
022114115: RNCC: 3 | RNVC: 2
2805-97-111-0325: RNCC: 3 | RNVC: 2

10 Apr 1992

5340-37-502-5743
Mounting Bracket

375025743
KDS 5820-1263: RNCC: 2 | RNVC: 1
50075807: RNCC: 3 | RNVC: 2

23 Dec 1993

5340-37-502-9857
Mount Assembly

375029857
60311652: RNCC: 3 | RNVC: 2

15 Nov 1996

5340-37-518-3323
Bearing Outer Plate

375183323
353-72732-0: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-37-504-0820

5340-37-513-8323

5340-37-510-8096

5340-37-511-9117
Cushioning Pad

375119117
Q45018758: RNCC: 3 | RNVC: 2
Q45018758: RNCC: 5 | RNVC: 2

3 May 2005

5340-37-520-3831
Mounting Bracket

375203831
A80026162: RNCC: 3 | RNVC: 2
A80026162: RNCC: 5 | RNVC: 2

1 Dec 2010

5340-37-516-1240
Fixation Bracket

375161240
A80014218: RNCC: 3 | RNVC: 2
A80014218: RNCC: 5 | RNVC: 2

23 Oct 2008

5340-37-512-6512
Circums Support Bar

375126512
20143711: RNCC: 3 | RNVC: 2
20143711: RNCC: 5 | RNVC: 2

13 Oct 2005

5340-37-506-2202
Torque Key

375062202
KDC 1025-P0004: RNCC: 2 | RNVC: 1
KDS 2350-1024: RNCC: 2 | RNVC: 1
20027293: RNCC: 3 | RNVC: 2

17 Aug 1999

5340-37-525-1854
Luggage Handle

375251854
HO-413-120 (M4): RNCC: 3 | RNVC: 2

10 Jan 2013

5340-37-505-6440
Spring Holder

375056440
KDS 2350-1024: RNCC: 2 | RNVC: 1
60359618: RNCC: 3 | RNVC: 2

20 Apr 1999

5340-37-523-7046
Angle Bracket

375237046
60818405-3: RNCC: 3 | RNVC: 2
60818405-3: RNCC: 5 | RNVC: 2
60818405: RNCC: D | RNVC: 9

13 Jul 2012

5340-37-523-5948
Mounting Bracket

375235948
61481458-1: RNCC: 3 | RNVC: 2
61481458-1: RNCC: 5 | RNVC: 2
61481458: RNCC: D | RNVC: 9

3 Jul 2012

5340-37-522-6512
Handle Grip

375226512
A82011931: RNCC: 3 | RNVC: 2
A82011931: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-37-510-4398
Spring Tension Clip

375104398
Q65051711: RNCC: 3 | RNVC: 1
Q65051711-1: RNCC: 3 | RNVC: 2

18 Feb 2004

5340-37-510-1464

5340-37-523-4419
Block

375234419
A60078961-1: RNCC: 3 | RNVC: 2
A60078961-1: RNCC: 5 | RNVC: 2
A60078961: RNCC: D | RNVC: 9

13 Jun 2012

5340-37-520-9207
Mounting Plate

375209207
A60068008: RNCC: 3 | RNVC: 2
A60068008: RNCC: 5 | RNVC: 2

3 Mar 2011

5340-37-519-2058
Mounting Bracket

375192058
81362988: RNCC: 3 | RNVC: 2
81362988: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-37-523-7926
L Round Lower Guide

375237926
A60078614-1: RNCC: 3 | RNVC: 2
A60078614-1: RNCC: 5 | RNVC: 2
A60078614: RNCC: D | RNVC: 9

18 Jul 2012

5340-37-504-8522
Mounting Bracket

375048522
KDS 2320-1023: RNCC: 2 | RNVC: 1
60382088: RNCC: 5 | RNVC: 9
60382088: RNCC: 5 | RNVC: 9

3 Nov 1997

5340-37-503-8206

5340-37-504-7829

5340-37-504-5754

5340-37-515-0035
Angle Bracket

375150035
50133742: RNCC: 3 | RNVC: 2
50133742: RNCC: 5 | RNVC: 2

10 Apr 2008

5340-37-514-9646
Mounting Bracket

375149646
50139418: RNCC: 3 | RNVC: 2
50139418: RNCC: 5 | RNVC: 2

4 Apr 2008

5340-37-515-9053
Housing Assembly

375159053
91028491: RNCC: 3 | RNVC: 2
91028491: RNCC: 5 | RNVC: 2

13 Oct 2008

5340-37-501-3416
Mounting Plate

375013416
60724005: RNCC: 3 | RNVC: 2
60724005: RNCC: 5 | RNVC: 2

21 Jun 1989

5340-37-502-7468
Cushioning Pad

375027468
60763069: RNCC: 3 | RNVC: 2

7 Jun 1994

5340-37-510-4076
Spring Tension Clip

375104076
Q65049611: RNCC: 3 | RNVC: 2

10 Feb 2004

5340-37-508-5667
Helical Compression Spring Seat

375085667
Q65033445: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-37-515-9662
Clamp

375159662
KSR2045-2TYPE-50-M1: RNCC: 2 | RNVC: 2
KSR2045-2TYPE-50-M1: RNCC: 4 | RNVC: 1

20 Oct 2008

5340-37-508-5777
Bail Handle

375085777
Q65034375: RNCC: 3 | RNVC: 2

7 Feb 2002

5340-37-506-0777
Plunger Fixed

375060777
KDS 1025-1149: RNCC: 2 | RNVC: 1
20026487: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-37-521-4369
Lever Bracket

375214369
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81005345-01: RNCC: 3 | RNVC: 2
A81005345-01: RNCC: 5 | RNVC: 2
A81005345: RNCC: D | RNVC: 9

20 Jun 2011

5340-37-515-0561
Nut And Bolt Locking Plate

375150561
50138848: RNCC: 3 | RNVC: 1
50138848-04: RNCC: 3 | RNVC: 2
50138848-04: RNCC: 5 | RNVC: 2

17 Apr 2008

5340-37-512-9642
Mounting Bracket

375129642
Q25025338: RNCC: 3 | RNVC: 2
Q25025338: RNCC: 5 | RNVC: 2

29 Mar 2006

5340-37-522-7086
Mounting Bracket

375227086
KDC 1680-T4005: RNCC: 2 | RNVC: 1
A81025341: RNCC: 3 | RNVC: 2
A81025341-01: RNCC: 3 | RNVC: 2
A81025341-01: RNCC: 5 | RNVC: 2

20 Feb 2012

5340-37-508-0585
Mounting Plate

375080585
80266525: RNCC: 5 | RNVC: 2

15 Sep 2001

5340-37-501-3091
Angle Bracket

375013091
60746120: RNCC: 3 | RNVC: 2
60746120: RNCC: 5 | RNVC: 2

17 May 1989

5340-37-514-7060
Loop Clamp

375147060
10301.4170.030.002: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-37-522-4478
Mounting Bracket

375224478
50139093: RNCC: 3 | RNVC: 2
50139093: RNCC: 5 | RNVC: 2

6 Jan 2012

5340-37-505-3148
Shock Mount Pad

375053148
50104285: RNCC: 3 | RNVC: 2

18 Sep 1998

5340-37-526-8850
Mounting Bracket

375268850
A60023558: RNCC: 3 | RNVC: 2
A60023558: RNCC: 5 | RNVC: 2

10 Sep 2013

5340-37-526-9070
Access Cover

375269070
A70009797: RNCC: 3 | RNVC: 2
A70009797: RNCC: 5 | RNVC: 2

12 Sep 2013

5340-37-511-1372
Extension Drawer Slide

375111372
60445790: RNCC: 3 | RNVC: 2
D560-N0.12: RNCC: 5 | RNVC: 2
D560-N0.12: RNCC: 5 | RNVC: 2

31 Aug 2004

5340-37-526-4745
Mounting Plate

375264745
A60050671: RNCC: 3 | RNVC: 2
A60050671: RNCC: 5 | RNVC: 2

23 Jul 2013

5340-37-512-8124
Upper Body Cover

375128124
Q25027095: RNCC: 3 | RNVC: 2
Q25027095: RNCC: 5 | RNVC: 2

7 Feb 2006

5340-37-514-1961
Blank Panel

375141961
A90007787: RNCC: 3 | RNVC: 2
A90007787: RNCC: 5 | RNVC: 2

25 Oct 2007

5340-37-513-4659
Dust And Moisture Seal Protective Cover

375134659
Q65043636: RNCC: 3 | RNVC: 2
Q65043636: RNCC: 5 | RNVC: 2

30 Jan 2007

5340-37-522-6903
Mounting Bracket

375226903
A60072359: RNCC: 3 | RNVC: 2
A60072359: RNCC: 5 | RNVC: 2

15 Feb 2012

5340-37-524-2801
Multiple Angle Bracket

375242801
91038263: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-37-506-5287
Accumulator Cover

375065287
60343878: RNCC: 3 | RNVC: 2

20 Oct 1999

5340-37-526-8653
Mounting Plate

375268653
A90027080: RNCC: 3 | RNVC: 2
A90027080: RNCC: 5 | RNVC: 2

9 Sep 2013

5340-37-525-6588
Ball Socket Seat

375256588
11111750140-1: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-37-525-6336
Access Cover

375256336
DSN1080/1140-7215: RNCC: 3 | RNVC: 2

21 Feb 2013

5340-37-522-0584
Mounting Bracket

375220584
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81351304-01: RNCC: 3 | RNVC: 2
A81351304-01: RNCC: 5 | RNVC: 2
A81351304: RNCC: D | RNVC: 9

7 Nov 2011

5340-37-521-4266
Corner Brace

375214266
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81005112-01: RNCC: 3 | RNVC: 2
A81005112-01: RNCC: 5 | RNVC: 2
A81005112: RNCC: D | RNVC: 9

17 Jun 2011

5340-37-513-4476
Support Hook

375134476
AEG7879-1878: RNCC: 3 | RNVC: 2

29 Jan 2007

5340-37-500-3777
Angle Bracket

375003777
KDC2350-P0001-16: RNCC: 2 | RNVC: 1
60625095: RNCC: 5 | RNVC: 9

23 Feb 1989

5340-37-524-3133
Bumper

375243133
D60838352: RNCC: 3 | RNVC: 2

28 Aug 2012

5340-37-518-5137
Elastic Strap

375185137
20038-420: RNCC: 3 | RNVC: 2
20038-420: RNCC: 5 | RNVC: 2

10 Aug 2009

5340-37-504-8047
Mounting Bracket

375048047
KDS 2320-1023: RNCC: 2 | RNVC: 1
60380062: RNCC: 5 | RNVC: 9
60380062: RNCC: 5 | RNVC: 9

18 Oct 1997

5340-37-517-7184
Mounting Bracket

375177184
60821859: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60821859: RNCC: 5 | RNVC: 2

26 Jun 2009

5340-37-150-0011
Ring

371500011
KDC 1240-P0002: RNCC: 2 | RNVC: 1
5340-97-150-0011: RNCC: 2 | RNVC: 2
1240-K11-0960: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-511-0508
Protection Cover

375110508
Q55607202: RNCC: 3 | RNVC: 1
Q55607202: RNCC: 5 | RNVC: 9

7 Aug 2004

5340-37-511-2250
Mounting Bracket

375112250
Q65079795: RNCC: 3 | RNVC: 2
Q65079795: RNCC: 5 | RNVC: 2

17 Sep 2004

5340-37-507-1864

5340-37-507-5534

5340-37-519-1238
Angle Bracket

375191238
81534380-01: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-511-7875
Angle Bracket

375117875
Q85012400: RNCC: 3 | RNVC: 2
Q85012400: RNCC: 5 | RNVC: 2

4 Apr 2005

5340-37-512-9296
Front Charge Guide

375129296
Q25025592-2: RNCC: 3 | RNVC: 2
Q25025592: RNCC: 5 | RNVC: 1
Q25025592-2: RNCC: 5 | RNVC: 2

16 Mar 2006

5340-37-521-0642
Cowling Lock

375210642
A81016308-02: RNCC: 3 | RNVC: 2
A81016308-02: RNCC: 5 | RNVC: 2
A81016308: RNCC: D | RNVC: 9

31 Mar 2011

5340-37-557-1768
Frame-2

375571768
F50001106: RNCC: 5 | RNVC: 1

14 Apr 2004

5340-37-516-2523
Mounting Plate

375162523
20 0440 O: RNCC: 3 | RNVC: 1
S20 0441 O: RNCC: 3 | RNVC: 2

6 Nov 2008

5340-37-510-2764
U Type Band

375102764
Q55016738: RNCC: 3 | RNVC: 2
Q55016738: RNCC: 5 | RNVC: 2

15 Dec 2003

5340-37-521-3904
Mounting Plate

375213904
KDS 2350-4004: RNCC: 2 | RNVC: 1
A60023623: RNCC: 3 | RNVC: 2
A60023623: RNCC: 5 | RNVC: 2

1 Jun 2011

5340-37-523-7911
Mounting Plate

375237911
A60078742: RNCC: 3 | RNVC: 2
A60078742: RNCC: 5 | RNVC: 2

18 Jul 2012

5340-37-514-9713
Mounting Bracket

375149713
50140386: RNCC: 3 | RNVC: 2
50140386: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-37-525-5197
Blank Panel

375255197
A50041505: RNCC: 3 | RNVC: 2
A50041505: RNCC: 5 | RNVC: 2

4 Feb 2013

5340-37-516-5005
Friction Catch

375165005
83012961: RNCC: 3 | RNVC: 2
83012961: RNCC: 5 | RNVC: 2

26 Nov 2008

5340-37-028-0401

5340-37-005-0050

5340-37-507-4442

5340-37-515-2861
Mounting Plate

375152861
50146902: RNCC: 3 | RNVC: 2
50146902: RNCC: 5 | RNVC: 2

22 May 2008

5340-37-512-9718
Left Push Assembly

375129718
Q25025581-1: RNCC: 3 | RNVC: 2
Q25025581-1: RNCC: 5 | RNVC: 2

31 Mar 2006

5340-37-502-3264
Manual Control Lever

375023264
KDS 6230-1047: RNCC: 2 | RNVC: 1
N91001008: RNCC: 3 | RNVC: 2
6230-NSN: RNCC: 6 | RNVC: 9

12 Dec 1992

5340-37-524-4460
Lock Bolt

375244460
KSB1028-CO-M16X16-45H-S: RNCC: 2 | RNVC: 2
KS B 1028: RNCC: 4 | RNVC: 1
KSB1028-CO-M16X16-45H-S: RNCC: 5 | RNVC: 2

12 Sep 2012

5340-37-514-8553
Mounting Bracket

375148553
50138207: RNCC: 3 | RNVC: 2
50138207: RNCC: 5 | RNVC: 2

17 Mar 2008

5340-37-509-2096
Embarkation Band As

375092096
93011321: RNCC: 3 | RNVC: 2
93011321: RNCC: 5 | RNVC: 9
93011321: RNCC: 5 | RNVC: 9

10 Sep 2002

5340-37-526-3250
Butt Hinge

375263250
81107769: RNCC: 3 | RNVC: 2
81107769: RNCC: 5 | RNVC: 2

5 Jul 2013

5340-37-525-5304
Mounting Bracket

375255304
A50041768: RNCC: 3 | RNVC: 2
A50041768: RNCC: 5 | RNVC: 2

5 Feb 2013

5340-37-505-7443
Mounting Bracket

375057443
Q45016469: RNCC: 3 | RNVC: 2

25 May 1999

5340-37-511-1623
Red Cross Mar Panel

375111623
Q65079981: RNCC: 3 | RNVC: 2
Q65079981: RNCC: 5 | RNVC: 2

4 Sep 2004

5340-37-525-8049
Mending Plate

375258049
95010988: RNCC: 3 | RNVC: 2
95010988: RNCC: 5 | RNVC: 2

17 Mar 2013

5340-37-526-4558
Loop Clamp

375264558
Q65027157: RNCC: 3 | RNVC: 2
Q65027157: RNCC: 5 | RNVC: 2

23 Jul 2013

5340-37-514-3771
Mounting Bracket

375143771
10301.9204.830: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-37-511-3278
Mounting Plate

375113278
40017237: RNCC: 3 | RNVC: 2
40017237: RNCC: 5 | RNVC: 2

3 Nov 2004

5340-37-519-2963
Access Cover

375192963
81364440: RNCC: 3 | RNVC: 2
81364440: RNCC: 5 | RNVC: 2

8 Mar 2010

5340-37-518-4703
Mounting Bracket

375184703
A20013355: RNCC: 3 | RNVC: 2
A20013355: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-518-7885
Catch Strike

375187885
60815819: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60815819: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-510-2734
Front Door As Cover

375102734
Q55016883: RNCC: 3 | RNVC: 2
Q55016883: RNCC: 5 | RNVC: 2

15 Dec 2003

5340-37-513-2639
Access Cover

375132639
A40000624: RNCC: 3 | RNVC: 2
A40000624: RNCC: 5 | RNVC: 2

3 Nov 2006

5340-37-514-1006
Filter Block

375141006
50143866: RNCC: 3 | RNVC: 2
50143866: RNCC: 5 | RNVC: 2

1 Oct 2007

5340-37-507-0990
Mounting Plate

375070990
20101110: RNCC: 5 | RNVC: 9

15 May 2000

5340-37-519-3098
Mounting Plate

375193098
81364799: RNCC: 3 | RNVC: 2
81364799: RNCC: 5 | RNVC: 2

10 Mar 2010

5340-37-510-1386
Wire Guard

375101386
50085796: RNCC: 3 | RNVC: 2
08258: RNCC: 3 | RNVC: 2
50085796: RNCC: 3 | RNVC: 2

6 Oct 2003

5340-37-508-5061
Section Block Clamp

375085061
Q65031581: RNCC: 3 | RNVC: 2

24 Jan 2002

5340-37-524-0740
Tee Hinge

375240740
A60046094: RNCC: 3 | RNVC: 2
A60046094: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-524-5170
Dust And Moisture Seal Protective Cover

375245170
Q65303263: RNCC: 3 | RNVC: 2
Q65303263: RNCC: 5 | RNVC: 2

24 Sep 2012

5340-37-514-9679
Mounting Bracket

375149679
10301.0103.025.003: RNCC: 3 | RNVC: 2

4 Apr 2008

5340-37-501-9799
Detent Plunger

375019799
60738405: RNCC: 3 | RNVC: 2
60738405: RNCC: 5 | RNVC: 2

4 Sep 1991

5340-37-523-9184
Mounting Plate

375239184
60823509: RNCC: 3 | RNVC: 2
60823509: RNCC: 5 | RNVC: 2

1 Aug 2012

5340-37-511-0063
Sensor Plate

375110063
Q65067030: RNCC: 3 | RNVC: 2
Q65067030: RNCC: 5 | RNVC: 2

28 Jul 2004

5340-37-512-8945
Latch Assembly

375128945
Q25027392: RNCC: 3 | RNVC: 2
Q25027392: RNCC: 5 | RNVC: 2

6 Mar 2006

5340-37-512-8095
Cable Protect Cover

375128095
Q25023407: RNCC: 3 | RNVC: 2
Q25023407: RNCC: 5 | RNVC: 2

6 Feb 2006

5340-37-526-8661
Mounting Bracket

375268661
A90027085: RNCC: 3 | RNVC: 2
A90027085: RNCC: 5 | RNVC: 2

9 Sep 2013

5340-37-527-0343
Mounting Plate

375270343
81076494: RNCC: 3 | RNVC: 2
81076494: RNCC: 5 | RNVC: 2

8 Oct 2013

5340-37-516-9282
Mounting Bracket

375169282
60820618: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60820618: RNCC: 5 | RNVC: 2

31 Mar 2009

5340-37-518-9219
Mounting Bracket

375189219
WF954305-01: RNCC: 3 | RNVC: 2

30 Nov 2009

5340-37-506-0047
Stopper

375060047
KDS 1025-1149: RNCC: 2 | RNVC: 1
20026305: RNCC: 3 | RNVC: 2

23 Jul 1999

5340-37-504-8659
Nonmetallic Bumper

375048659
KDS 2320-1023: RNCC: 2 | RNVC: 1
60383930: RNCC: 5 | RNVC: 9
60383930: RNCC: 5 | RNVC: 9

6 Nov 1997

5340-37-522-2850
Mounting Plate

375222850
KDS 2350-4003: RNCC: 2 | RNVC: 1
61507458: RNCC: 3 | RNVC: 2
61507458: RNCC: 5 | RNVC: 2

9 Dec 2011

5340-37-521-6694
Mounting Bracket

375216694
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81029322: RNCC: 3 | RNVC: 2
A81029322-01: RNCC: 5 | RNVC: 2

28 Jul 2011

5340-37-517-0487
Mounting Bracket

375170487
60820609: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60820609: RNCC: 5 | RNVC: 2

14 Apr 2009

5340-37-522-2577
Mounting Plate

375222577
KDS 2350-4003: RNCC: 2 | RNVC: 1
61507183: RNCC: 3 | RNVC: 2
61507183: RNCC: 5 | RNVC: 2
61507182: RNCC: D | RNVC: 9

2 Dec 2011

5340-37-527-0258
Dust And Moisture Seal Protective Plug

375270258
982 9199: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-37-511-4597
Recess Handle

375114597
Q55111407: RNCC: 3 | RNVC: 2
Q55111407: RNCC: 5 | RNVC: 2

1 Dec 2004

5340-37-510-7010
Dust And Moisture Seal Protective Cover

375107010
60576516: RNCC: 3 | RNVC: 2
60576516: RNCC: 3 | RNVC: 2
60576516: RNCC: 3 | RNVC: 2

1 May 2004

5340-37-512-8828
Bu Housing Assembly

375128828
Q25024021: RNCC: 3 | RNVC: 2
Q25024021: RNCC: 5 | RNVC: 2

2 Mar 2006

5340-37-511-5090
Support

375115090
20110811: RNCC: 3 | RNVC: 2
20110811: RNCC: 5 | RNVC: 2

18 Jan 2005

5340-37-521-2301
Angle Bracket

375212301
A82001392: RNCC: 3 | RNVC: 2
A82001392: RNCC: 5 | RNVC: 2

28 Apr 2011

5340-37-509-4883
Small Lock Assembly

375094883
KDS 2320-4001: RNCC: 2 | RNVC: 1
60443578: RNCC: 3 | RNVC: 2
60443578: RNCC: 3 | RNVC: 2

24 Jan 2003

5340-37-518-7858
Protect Cushion

375187858
60815715: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60815715: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-525-5810
Webbing Strap

375255810
KDS 6675-4001: RNCC: 2 | RNVC: 1
50167911: RNCC: 3 | RNVC: 2
50167911: RNCC: 5 | RNVC: 2

14 Feb 2013

5340-37-502-5397
Mounting Plate

375025397
60079529: RNCC: 3 | RNVC: 2

25 Nov 1993

5340-37-502-5237
Double Angle Bracket

375025237
60052923: RNCC: 3 | RNVC: 2
60052923: RNCC: 3 | RNVC: 2

11 Nov 1993

5340-37-521-6745
Mounting Bracket

375216745
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81035104: RNCC: 3 | RNVC: 2
A81035104-01: RNCC: 5 | RNVC: 2

28 Jul 2011

5340-37-511-2569
Access Cover

375112569
Q65080035: RNCC: 3 | RNVC: 2
Q65080035: RNCC: 5 | RNVC: 2

24 Sep 2004

5340-37-510-8516
Ventilator Plate

375108516
Q55026786: RNCC: 3 | RNVC: 1
Q55026786: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-37-511-5481
Mounting Plate

375115481
Q55024387: RNCC: 3 | RNVC: 2
Q55024387: RNCC: 5 | RNVC: 2

1 Feb 2005

5340-37-510-3660
Synchro Clamp

375103660
Q65050885: RNCC: 3 | RNVC: 2

27 Jan 2004

5340-37-508-3207
Hook Fastener

375083207
60756644: RNCC: 3 | RNVC: 2
60756644: RNCC: 5 | RNVC: 2

30 Nov 2001

5340-37-512-8855
Mounting Bracket

375128855
Q25025410: RNCC: 3 | RNVC: 2
Q25025410: RNCC: 5 | RNVC: 2

3 Mar 2006

5340-37-510-5891
Mounting Bracket

375105891
60574169: RNCC: 3 | RNVC: 1
60574169: RNCC: 3 | RNVC: 2

9 Apr 2004

5340-37-501-5494
Angle Bracket

375015494
60771702: RNCC: 3 | RNVC: 2
60771702: RNCC: 5 | RNVC: 2
871 203 31 40: RNCC: 5 | RNVC: 2

26 Mar 1990

5340-37-500-3111
Rubber Bumper

375003111
60690039: RNCC: 5 | RNVC: 9

24 Dec 1991

5340-37-513-0294
Mounting Bracket

375130294
Q45023977: RNCC: 3 | RNVC: 2
Q45023907: RNCC: 5 | RNVC: 2

3 May 2006

5340-37-514-9806
Mounting Plate

375149806
50145812: RNCC: 3 | RNVC: 2
50145812: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-37-526-2243
Trm Cover

375262243
A50049034: RNCC: 5 | RNVC: 2
A50049034: RNCC: D | RNVC: 9

17 Jun 2013

Load More Results