What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Quick Release Plunger?

A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is a Mortise Latch?

A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.

What is a Flush Catch?

A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).

What is a Clamp Bolt Assembly?

A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.

What is a Retaining Band?

A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.

What is a Bow Handle?

A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.

What is a Recess Handle?

A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.

What is a Bail Handle?

A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.

What is a Double Angle Bracket?

A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

What is a Strap Fastener Loop?

A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.

What is a Webbing Strap?

A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.

What is a Spring Tension Clip?

A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.

Hardware, Commercial - Korea (KR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Korea (KR) - NCB is 37

Page 47 of 56

NSN Format for Hardware, Commercial
Codified by Korea

53	40	37	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Korea (KR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 19 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 59 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 32 Items
Holder,Loop 25 Items
Holder,Spring 36 Items
What is a Rod End Connector? 58 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 89 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is a Metal Grille? 15 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 15 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 145 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 25 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 20 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Thumb Latch? 14 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 16 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 11 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Sliding Door Track? 13 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorknob? 12 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Tee Hinge? 11 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 16 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is a Butt Hinge Leaf? 45 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Mending Plate? 21 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 30 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Dust And Moisture Seal Protective Cap? 98 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 116 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 34 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 53 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 97 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 14 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Nut And Bolt Retainer? 12 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is an Angle Bracket? 1486 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 10 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Loop Clamp? 304 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 53 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 26 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 45 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 13 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flush Catch? 10 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 26 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 76 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 234 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 10 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 44 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 255 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 11 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 95 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 116 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 36 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 472 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 49 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 14 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Window Retaining Plate? 35 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 114 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 57 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Helical Compression Spring Seat? 18 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 40 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 42 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 19 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Vent Plug? 29 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 1435 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Threaded Rod End? 80 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 11 Items
What is a Manual Control Handle? 127 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Lever Bracket? 37 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 33 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 254 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 4187 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Section Block Clamp? 134 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Beam Gripping Clamp? 13 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 2701 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Synchro Clamp? 57 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 118 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Threaded Standoff? 11 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 36 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 247 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 33 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Runner? 23 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Track Stop? 13 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 30 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Masking Plate? 18 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 318 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 48 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Sliding Block? 18 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 41 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 25 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Shimmy Damper? 13 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 124 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 21 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Resilient Mount Plate? 12 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 80 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 11 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 91 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Locking Stay? 13 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 26 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Aircraft Latch Hook? 19 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 55 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 47 of 56

5340-37-523-9488
Fron Plate Assembly

375239488
60822426: RNCC: 3 | RNVC: 2
60822426: RNCC: 5 | RNVC: 2

3 Aug 2012

5340-37-504-3994
Double Angle Bracket

375043994
50096567: RNCC: 5 | RNVC: 9

24 Sep 1996

5340-37-523-5597
Angle Bracket

375235597
61515447: RNCC: 5 | RNVC: 2

28 Jun 2012

5340-37-513-0122
Mounting Bracket

375130122
Q25026065: RNCC: 3 | RNVC: 2
Q25026065: RNCC: 5 | RNVC: 2

24 Apr 2006

5340-37-512-8986
Mechanical Stop

375128986
Q25026861: RNCC: 3 | RNVC: 2
Q25026861: RNCC: 5 | RNVC: 2

7 Mar 2006

5340-37-503-6179
Loop Clamp

375036179
60309839: RNCC: 3 | RNVC: 2
60309839-2: RNCC: 3 | RNVC: 2

30 Apr 1996

5340-37-525-6873
Access Door Hinge

375256873
KH-66-2: RNCC: 3 | RNVC: 2

4 Mar 2013

5340-37-512-9457
Mounting Bracket

375129457
Q25026050-2: RNCC: 3 | RNVC: 2
Q25026050: RNCC: 5 | RNVC: 1
Q25026050-2: RNCC: 5 | RNVC: 2

21 Mar 2006

5340-37-518-2600
Manual Control Handle

375182600
3536463-801: RNCC: 5 | RNVC: 2

23 Jul 2009

5340-37-518-2746
Handle

375182746
7793016741 01: RNCC: 5 | RNVC: 2
9P152.00.070: RNCC: 5 | RNVC: 2

24 Jul 2009

5340-37-511-1116
Cushioning Pad

375111116
60671489: RNCC: 3 | RNVC: 2
60671489-5: RNCC: 5 | RNVC: 2

25 Aug 2004

5340-37-515-0339
Angle Bracket

375150339
Q65021524-1: RNCC: 3 | RNVC: 2
Q65021524-1: RNCC: 5 | RNVC: 2

15 Apr 2008

5340-37-506-4196
Loop Clamp

375064196
KDS 1356-1005: RNCC: 2 | RNVC: 1
93008749: RNCC: 5 | RNVC: 9
93008749: RNCC: 5 | RNVC: 9

8 Sep 1999

5340-37-526-4265
Access Cover

375264265
61516228: RNCC: 3 | RNVC: 2
61516228: RNCC: 5 | RNVC: 2

18 Jul 2013

5340-37-520-7717
Mounting Bracket

375207717
A81140339: RNCC: 3 | RNVC: 2
A8114033901: RNCC: 3 | RNVC: 2
A8114033901: RNCC: 5 | RNVC: 2

9 Feb 2011

5340-37-503-1792
Webbing Strap

375031792
60635927: RNCC: 3 | RNVC: 2
60635927-3: RNCC: 5 | RNVC: 9

8 Dec 1994

5340-37-507-8266
Retaining Strap

375078266
Q25018735-1: RNCC: 3 | RNVC: 2
Q25018735: RNCC: 5 | RNVC: 9
Q25018735: RNCC: 5 | RNVC: 9

17 May 2001

5340-37-523-3461
Block Clamp

375233461
60818411: RNCC: 3 | RNVC: 2
60818411: RNCC: 5 | RNVC: 2

31 May 2012

5340-37-514-2566
Mounting Bracket

375142566
50141535: RNCC: 3 | RNVC: 2
50141535-2: RNCC: 5 | RNVC: 2

8 Nov 2007

5340-37-522-0107
Angle Bracket

375220107
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81035332: RNCC: 3 | RNVC: 2
A81035332-01: RNCC: 3 | RNVC: 2
A81035332-01: RNCC: 5 | RNVC: 2

1 Nov 2011

5340-37-514-1985
Multiple Angle Bracket

375141985
A90008023: RNCC: 3 | RNVC: 2
A90008023: RNCC: 5 | RNVC: 2

25 Oct 2007

5340-37-510-7263
Washing S Connector

375107263
60442730: RNCC: 3 | RNVC: 2
60442730: RNCC: 3 | RNVC: 2

15 May 2004

5340-37-519-1983
Angle Bracket

375191983
81362669: RNCC: 3 | RNVC: 2
81362669: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-37-506-0877
Cushioning Pad

375060877
KDS 2350-1024: RNCC: 2 | RNVC: 1
60340157: RNCC: 3 | RNVC: 2

6 Aug 1999

5340-37-520-6676
Angle Bracket

375206676
85T7371-125: RNCC: 3 | RNVC: 2
85T7371-125: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-522-3650
Rigid Caster

375223650
CMGS-L150-U: RNCC: 3 | RNVC: 2
CMGS-L150-U: RNCC: 5 | RNVC: 2

21 Dec 2011

5340-37-524-1773
Support

375241773
A60079361: RNCC: 3 | RNVC: 2
A60079361: RNCC: 5 | RNVC: 2

17 Aug 2012

5340-37-504-3886
Bracket

375043886
50087398: RNCC: 5 | RNVC: 9

21 Sep 1996

5340-37-522-2391
Mounting Plate

375222391
A20018758: RNCC: 3 | RNVC: 2
A20018758: RNCC: 5 | RNVC: 2

1 Dec 2011

5340-37-517-3112
Holding Plate

375173112
A60022486: RNCC: 3 | RNVC: 2
A60022486: RNCC: 5 | RNVC: 2

1 Jun 2009

5340-37-516-4443
Under Part Panel

375164443
91028625: RNCC: 3 | RNVC: 2
91028625: RNCC: 5 | RNVC: 2

23 Nov 2008

5340-37-504-7940
Mounting Plate

375047940
60379012: RNCC: 5 | RNVC: 9
60379012: RNCC: 5 | RNVC: 9

14 Oct 1997

5340-37-508-0528
Rod

375080528
80266521: RNCC: 5 | RNVC: 2

13 Sep 2001

5340-37-508-3905
Mounting Plate

375083905
95008653: RNCC: 3 | RNVC: 2

12 Dec 2001

5340-37-507-3969

5340-37-509-0763
Dust And Moisture Seal Protective Plug

375090763
Q65039004-1: RNCC: 3 | RNVC: 2
Q65039004: RNCC: 3 | RNVC: 2

24 Jul 2002

5340-37-518-0702
Bridge Clamp

375180702
60832351: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60832351: RNCC: 5 | RNVC: 2

8 Jul 2009

5340-37-518-0888
Mounting Bracket

375180888
60826022: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826022: RNCC: 5 | RNVC: 2

10 Jul 2009

5340-37-526-9699
Mounting Bracket

375269699
FA-GAS-100: RNCC: 3 | RNVC: 2

26 Sep 2013

5340-37-518-7932
Mounting Plate

375187932
60816121: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60816121: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-518-1372
Access Cover

375181372
60824095: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60824095: RNCC: 5 | RNVC: 2

21 Jul 2009

5340-37-516-5263
Hand Crank

375165263
20030080: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030080: RNCC: 5 | RNVC: 2

15 Dec 2008

5340-37-507-3636
Dust And Moisture Seal Protective Cap

375073636
KDS 5805-3001: RNCC: 2 | RNVC: 1
Q55105303: RNCC: 5 | RNVC: 9
Q55105303: RNCC: 5 | RNVC: 9

18 Sep 2000

5340-37-519-1819
Access Door Hinge

375191819
81362202: RNCC: 3 | RNVC: 2
81362202: RNCC: 5 | RNVC: 2

22 Jan 2010

5340-37-527-2387
Mounting Plate

375272387
A50059912: RNCC: 3 | RNVC: 2
A50059912: RNCC: 5 | RNVC: 2

21 Oct 2013

5340-37-510-2443
Mounting Bracket

375102443
81044427: RNCC: 3 | RNVC: 2
81044427: RNCC: 3 | RNVC: 2

8 Dec 2003

5340-37-505-7316
Rubber Bumper

375057316
Q45016010: RNCC: 3 | RNVC: 2

20 May 1999

5340-37-511-6307
Access Door Hinge

375116307
95010273: RNCC: 3 | RNVC: 2
95010273: RNCC: 5 | RNVC: 9

7 Mar 2005

5340-37-518-4647
Mounting Bracket

375184647
A20013552: RNCC: 3 | RNVC: 2
A20013552: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-517-5731
Kit

375175731
001023-089: RNCC: 3 | RNVC: 2

18 Jun 2009

5340-37-508-8586
Mounting Plate

375088586
80267324: RNCC: 5 | RNVC: 2

23 Apr 2002

5340-37-523-0752
Retaining Band

375230752
312617M000: RNCC: 3 | RNVC: 2
83026721: RNCC: 3 | RNVC: 2
83026721: RNCC: 5 | RNVC: 2

20 Apr 2012

5340-37-523-7913
Angle Bracket

375237913
A60078692-2: RNCC: 3 | RNVC: 2
A60078692-2: RNCC: 5 | RNVC: 2
A60078692: RNCC: D | RNVC: 9

18 Jul 2012

5340-37-521-8126
Double Angle Bracket

375218126
KDS1510-4002: RNCC: 2 | RNVC: 1
85P6921-001: RNCC: 3 | RNVC: 2
85P6921-001: RNCC: 5 | RNVC: 2

7 Sep 2011

5340-37-520-6610
Mounting Plate

375206610
KDS 1005-1389: RNCC: 2 | RNVC: 1
Q55606881: RNCC: 3 | RNVC: 2
Q55606881: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-505-7354
Angle Bracket

375057354
KDS 1510-4001: RNCC: 2 | RNVC: 1
81315401: RNCC: 5 | RNVC: 9
81315401-01: RNCC: 5 | RNVC: 9

21 May 1999

5340-37-515-0555
Stabilization Block

375150555
50138819: RNCC: 3 | RNVC: 1
50138819-01: RNCC: 3 | RNVC: 2
50138819-01: RNCC: 5 | RNVC: 2

17 Apr 2008

5340-37-526-2401
Upper Cover

375262401
A50053228: RNCC: 5 | RNVC: 2
A50053228: RNCC: D | RNVC: 9

17 Jun 2013

5340-37-523-7267
Mounting Bracket

375237267
91043808-01: RNCC: 3 | RNVC: 2
91043808-01: RNCC: 5 | RNVC: 2
91043808: RNCC: D | RNVC: 9

15 Jul 2012

5340-37-522-4127
Mounting Bracket

375224127
KDC 1680-T4005: RNCC: 2 | RNVC: 1
A81025544-01: RNCC: 3 | RNVC: 2
A81025544: RNCC: 3 | RNVC: 2
A81025544-01: RNCC: 5 | RNVC: 2
A81025544-01: RNCC: 5 | RNVC: 2

28 Dec 2011

5340-37-526-3614
Mounting Bracket

375263614
8470014: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-37-526-5740
Support Hook

375265740
81078342: RNCC: 3 | RNVC: 2
81078342: RNCC: 5 | RNVC: 2

5 Aug 2013

5340-37-510-1540
Nonmetallic Bumper

375101540
20110456: RNCC: 3 | RNVC: 2
20110456: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-37-519-3319
Rear Guide

375193319
A20008108: RNCC: 3 | RNVC: 2
A20008108: RNCC: 5 | RNVC: 2

18 Mar 2010

5340-37-518-4698
Access Cover

375184698
A20013347: RNCC: 3 | RNVC: 2
A20013347: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-526-5413
Mounting Bracket

375265413
61516512: RNCC: 3 | RNVC: 2
61516512: RNCC: 5 | RNVC: 2

31 Jul 2013

5340-37-508-6447
Mounting Plate

375086447
Q65047622: RNCC: 3 | RNVC: 2
Q65047622: RNCC: 5 | RNVC: 2

28 Feb 2002

5340-37-510-2956
Seal Retaining Plate

375102956
80044699: RNCC: 2 | RNVC: 2
80044699: RNCC: 3 | RNVC: 2

22 Dec 2003

5340-37-507-4187

5340-37-555-1540

5340-37-526-5425
Nut And Bolt Locking Plate

375265425
61516238-3: RNCC: 3 | RNVC: 2
61516238-3: RNCC: 5 | RNVC: 2
61516238: RNCC: D | RNVC: 9

31 Jul 2013

5340-37-511-8973
Multiple Angle Bracket

375118973
85Y9133-085: RNCC: 3 | RNVC: 2
85Y9133-085: RNCC: 5 | RNVC: 2

28 Apr 2005

5340-37-505-9094
Mounting Bracket

375059094
KDS 2350-1024: RNCC: 2 | RNVC: 1
60343861: RNCC: 3 | RNVC: 2

8 Jul 1999

5340-37-522-7238
Turnbuckle Body

375227238
KDS2350-4005: RNCC: 2 | RNVC: 1
A60072762: RNCC: 3 | RNVC: 2
A60072762: RNCC: 5 | RNVC: 2

22 Feb 2012

5340-37-505-8265
Toggle

375058265
KDS 6230-3001: RNCC: 2 | RNVC: 1
F50001534: RNCC: 3 | RNVC: 2
PB100001: RNCC: 3 | RNVC: 2

15 Jun 1999

5340-37-519-2206
Mounting Plate

375192206
81363261: RNCC: 3 | RNVC: 2
81363261: RNCC: 5 | RNVC: 2

9 Feb 2010

5340-37-510-0142
Mounting Bracket

375100142
82911406: RNCC: 3 | RNVC: 2
82911406-01: RNCC: 5 | RNVC: 2

22 Aug 2003

5340-37-523-5850
Mounting Plate

375235850
KDS 2350-4003: RNCC: 2 | RNVC: 1
61509020: RNCC: 3 | RNVC: 2
61509020: RNCC: 5 | RNVC: 2

2 Jul 2012

5340-37-525-5142
Retaining Clip

375255142
334-00024-1: RNCC: 3 | RNVC: 2

4 Feb 2013

5340-37-521-9167
Mounting Bracket

375219167
KDS 2350-4003: RNCC: 2 | RNVC: 1
61523920: RNCC: 3 | RNVC: 2
61523920: RNCC: 5 | RNVC: 2

23 Sep 2011

5340-37-518-7573
Bumper

375187573
60815472: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60815472: RNCC: 5 | RNVC: 2

23 Oct 2009

5340-37-516-1933
Access Door Hinge

375161933
83033105: RNCC: 3 | RNVC: 2
83033105: RNCC: 5 | RNVC: 2

3 Nov 2008

5340-37-502-0757
Electrical-Mechanical Equipment Post

375020757
KDS 5865-1012: RNCC: 2 | RNVC: 1
50073969: RNCC: 5 | RNVC: 9

25 Nov 1991

5340-37-517-9283
Mounting Bracket

375179283
WF272464-02: RNCC: 3 | RNVC: 2

1 Jul 2009

5340-37-515-2380
Mounting Bracket

375152380
50144896: RNCC: 3 | RNVC: 2
50144896: RNCC: 5 | RNVC: 2

15 May 2008

5340-37-520-1848
Mounting Bracket

375201848
A60025380: RNCC: 3 | RNVC: 2
A60025380: RNCC: 5 | RNVC: 2

29 Oct 2010

5340-37-505-1460
Bow Handle

375051460
KDS 5805-1073: RNCC: 2 | RNVC: 1
50105795: RNCC: 3 | RNVC: 2
50105795: RNCC: 5 | RNVC: 2

13 May 1998

5340-37-517-5951
Mounting Bracket

375175951
60832102: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60832102: RNCC: 5 | RNVC: 2

19 Jun 2009

5340-37-512-1680
Access Cover

375121680
85B6534-053: RNCC: 3 | RNVC: 2
85B6534-053: RNCC: 5 | RNVC: 2

24 Jun 2005

5340-37-514-3378
Prote Bearing Cover

375143378
Q25026520: RNCC: 3 | RNVC: 2
Q25026520: RNCC: 5 | RNVC: 2

21 Nov 2007

5340-37-501-1724
Bracket

375011724
KDC2350-P0003-6: RNCC: 2 | RNVC: 1
60703603: RNCC: 3 | RNVC: 2
60703603: RNCC: 5 | RNVC: 2

28 Nov 1988

5340-37-516-4418
Rear Panel

375164418
91028714: RNCC: 3 | RNVC: 2
91028714: RNCC: 5 | RNVC: 2

23 Nov 2008

5340-37-502-7758
Section Block Clamp

375027758
60085529: RNCC: 3 | RNVC: 2

13 Jul 1994

5340-37-517-9634
Piston Ring Size32

375179634
00798789: RNCC: 5 | RNVC: 1

2 Jul 2009

5340-37-524-5184
Dust And Moisture Seal Protective Cover

375245184
Q65303273: RNCC: 3 | RNVC: 2
Q65303273: RNCC: 5 | RNVC: 2

24 Sep 2012

5340-37-515-2729
Access Cover

375152729
50135923: RNCC: 3 | RNVC: 2
50135923: RNCC: 5 | RNVC: 2

19 May 2008

5340-37-526-3777
Access Cover

375263777
3773876: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-37-519-1211
Mechanical Stop

375191211
81321401-01: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-516-0377
Pad Eye

375160377
DQC-103: RNCC: 3 | RNVC: 2

21 Oct 2008

5340-37-526-7615
Access Cover

375267615
KDS 2350-4003: RNCC: 2 | RNVC: 2
61517018: RNCC: 5 | RNVC: 2
61517018: RNCC: D | RNVC: 9

28 Aug 2013

5340-37-512-3027
Cushioning Pad

375123027
AD50000711: RNCC: 3 | RNVC: 2
AD50000711-1: RNCC: 5 | RNVC: 1
K03024220: RNCC: 5 | RNVC: 2
AD50000711-1: RNCC: 5 | RNVC: 2

19 Jul 2005

5340-37-516-8821
Loop Clamp

375168821
80095722: RNCC: 3 | RNVC: 2
80095722: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-526-6195
Mounting Bracket

375266195
81078293: RNCC: 3 | RNVC: 2
81078293: RNCC: 5 | RNVC: 2

9 Aug 2013

5340-37-523-3233
Angle Bracket

375233233
60818176: RNCC: 3 | RNVC: 2
60818176: RNCC: 5 | RNVC: 2

30 May 2012

5340-37-524-0458
Prot Cover Assembly

375240458
A60077035: RNCC: 3 | RNVC: 2
A60077035: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-37-502-8675
Double Angle Bracket

375028675
60308677: RNCC: 3 | RNVC: 2

29 Sep 1994

5340-37-524-3949
Mounting Bracket

375243949
61515205: RNCC: 4 | RNVC: 1

4 Sep 2012

5340-37-504-8466
Angle Bracket

375048466
KDS 2320-1023: RNCC: 2 | RNVC: 1
60383687: RNCC: 5 | RNVC: 9
60383687: RNCC: 5 | RNVC: 9

1 Nov 1997

5340-37-522-9912
Mounting Plate

375229912
50139978-02: RNCC: 3 | RNVC: 2
50139978-02: RNCC: 5 | RNVC: 2
50139978: RNCC: D | RNVC: 9

5 Apr 2012

5340-37-503-6158

5340-37-508-5448

5340-37-502-7838
Retaining Strap

375027838
60086228: RNCC: 3 | RNVC: 2

13 Jul 1994

5340-37-516-8937
Mounting Bracket

375168937
80096396: RNCC: 3 | RNVC: 2
80096396: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-516-2249
Mounting Bracket

375162249
83001017: RNCC: 3 | RNVC: 2
83001017: RNCC: 5 | RNVC: 2

4 Nov 2008

5340-37-500-0568

5340-37-502-8806

5340-37-502-3733

5340-37-510-2845
Mounting Plate

375102845
80044304: RNCC: 3 | RNVC: 2
80044304: RNCC: 3 | RNVC: 2

16 Dec 2003

5340-37-519-2835
Mounting Plate

375192835
81364425: RNCC: 3 | RNVC: 2
81364425: RNCC: 5 | RNVC: 2

8 Mar 2010

5340-37-518-8879
Lock Bar

375188879
93015474: RNCC: 3 | RNVC: 2
93015474: RNCC: 5 | RNVC: 2

23 Nov 2009

5340-37-503-0054
Plug Screw

375030054
60630403: RNCC: 3 | RNVC: 2
65.90310-0106: RNCC: 5 | RNVC: 2
06.08041-2209: RNCC: 5 | RNVC: 2
60630435: RNCC: 5 | RNVC: 9

2 Nov 1994

5340-37-510-3673
Spring Tension Clip

375103673
Q65052219: RNCC: 3 | RNVC: 1
Q65052219-1: RNCC: 3 | RNVC: 2

27 Jan 2004

5340-37-519-3689
Cover

375193689
82291454: RNCC: 3 | RNVC: 2
82291454-01: RNCC: 5 | RNVC: 2

23 Mar 2010

5340-37-514-9784
Guide Pin

375149784
50145539: RNCC: 3 | RNVC: 2
50145539: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-37-523-4485
Mounting Plate

375234485
A60078098: RNCC: 3 | RNVC: 2
A60078098: RNCC: 5 | RNVC: 2

13 Jun 2012

5340-37-518-8977
Mounting Bracket

375188977
92003195: RNCC: 3 | RNVC: 2
92003195: RNCC: 5 | RNVC: 2

26 Nov 2009

5340-37-518-8832
Mounting Plate

375188832
93015436: RNCC: 3 | RNVC: 2
93015436: RNCC: 5 | RNVC: 2

23 Nov 2009

5340-37-502-3621
Cushioning Pad

375023621
KDS 2350-1024: RNCC: 2 | RNVC: 1
60300010-3: RNCC: 3 | RNVC: 2
60300010: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-37-521-0879
Mounting Plate

375210879
35-21198-0401: RNCC: 3 | RNVC: 2

7 Apr 2011

5340-37-518-9305
Cushioning Pad

375189305
KDS 1230-4004: RNCC: 2 | RNVC: 1
60819275: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60819275-3: RNCC: 5 | RNVC: 2

1 Dec 2009

5340-37-513-3556
Guide

375133556
432.64.002SB-1: RNCC: 5 | RNVC: 2

20 Dec 2006

5340-37-505-0634

5340-37-508-6910

5340-37-525-6566
Access Cover

375256566
11.28944-7823: RNCC: 3 | RNVC: 2
11289447476-1: RNCC: D | RNVC: 9

25 Feb 2013

5340-37-505-0418

5340-37-527-3347
Multiple Angle Bracket

375273347
A50042128: RNCC: 3 | RNVC: 2
A50042128: RNCC: 5 | RNVC: 2

30 Oct 2013

5340-37-526-8258
Mounting Bracket

375268258
81076195: RNCC: 3 | RNVC: 2
81076195: RNCC: 5 | RNVC: 2

4 Sep 2013

5340-37-524-1225
Mounting Bracket

375241225
D60839183: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-37-503-3413

5340-37-502-9885

5340-37-524-2856
Left Panel

375242856
91038342: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-37-502-9244
Bl0ck

375029244
60308980: RNCC: 3 | RNVC: 2

6 Oct 1994

5340-37-519-6923
Bumper

375196923
A20011462: RNCC: 3 | RNVC: 2
A20011462: RNCC: 5 | RNVC: 2

5 Jul 2010

5340-37-516-1657
Mounting Bracket

375161657
83037073: RNCC: 3 | RNVC: 2
83037073: RNCC: 5 | RNVC: 2

3 Nov 2008

5340-37-510-7260
Guide Round Bar

375107260
60442727: RNCC: 3 | RNVC: 2
60442727: RNCC: 3 | RNVC: 2

15 May 2004

5340-37-510-3548
Angle Bracket

375103548
81046682: RNCC: 5 | RNVC: 9

13 Jan 2004

5340-37-520-9444
Mounting Plate

375209444
A60067808: RNCC: 3 | RNVC: 2
A60067808: RNCC: 5 | RNVC: 2

8 Mar 2011

5340-37-514-8316
Bow Handle

375148316
H5-01-20-80: RNCC: 3 | RNVC: 2
H5-01-20-80: RNCC: 5 | RNVC: 2
H5-01-20-80: RNCC: 5 | RNVC: 2

13 Mar 2008

5340-37-132-1476
Strap

371321476
5340-97-132-1476: RNCC: 2 | RNVC: 2
60237528: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-518-5794
Mounting Bracket

375185794
60824431: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60824431: RNCC: 5 | RNVC: 2

21 Aug 2009

5340-37-503-2521
Mounting Plate

375032521
KDS 5985-1023: RNCC: 2 | RNVC: 1
50082839: RNCC: 3 | RNVC: 2
50082839-1: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-37-511-4018
Access Cover

375114018
10938414K-C: RNCC: 3 | RNVC: 2
10938414K: RNCC: 5 | RNVC: 1
10938414K-C: RNCC: 5 | RNVC: 2

7 Dec 2004

5340-37-504-4088
Lock-Release Lever

375044088
KDS 1285-1011: RNCC: 2 | RNVC: 1
50087610: RNCC: 5 | RNVC: 9

3 Oct 1996

5340-37-518-7628
Mounting Plate

375187628
93015394: RNCC: 3 | RNVC: 2
93015394: RNCC: 5 | RNVC: 2

26 Oct 2009

5340-37-517-3715
Dust And Moisture Seal Boot

375173715
60743236: RNCC: 3 | RNVC: 2

4 Jun 2009

5340-37-518-7966
Mounting Plate

375187966
92003287: RNCC: 3 | RNVC: 2
92003287: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-520-4065
Mounting Bracket

375204065
A60025044: RNCC: 3 | RNVC: 2
A60025044: RNCC: 5 | RNVC: 2

6 Dec 2010

5340-37-515-5854
Mounting Bracket

375155854
PLATE 90401-142-093: RNCC: 3 | RNVC: 2

28 Jul 2008

5340-37-521-5847
Mounting Plate

375215847
Q95013997-7: RNCC: 3 | RNVC: 2
Q95013997-7: RNCC: 5 | RNVC: 2
Q95013997: RNCC: D | RNVC: 9

14 Jul 2011

5340-37-521-2661
Access Cover

375212661
KDS 2350-4003: RNCC: 2 | RNVC: 1
61523420: RNCC: 3 | RNVC: 2
61523420: RNCC: 5 | RNVC: 2

6 May 2011

5340-37-525-0096
Mounting Plate

375250096
50159261: RNCC: 3 | RNVC: 2

7 Dec 2012

5340-37-526-1644
Mounting Plate

375261644
377-6131: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-37-503-8354
Access Cover

375038354
KDS 1270-1002: RNCC: 2 | RNVC: 1
92011767: RNCC: 5 | RNVC: 9

23 Feb 1996

5340-37-510-9582
Access Cover

375109582
Q65058539: RNCC: 3 | RNVC: 2
Q65058539: RNCC: 3 | RNVC: 2

22 Jul 2004

5340-37-523-7053
Mounting Plate

375237053
60824562: RNCC: 3 | RNVC: 2
60824562: RNCC: 5 | RNVC: 2

13 Jul 2012

5340-37-556-4421
Bracket

375564421
5340NSN028056: RNCC: 5 | RNVC: 1

7 Apr 2004

5340-37-519-3862
Mounting Plate

375193862
A20007621: RNCC: 3 | RNVC: 2
A20007621: RNCC: 5 | RNVC: 2

24 Mar 2010

5340-37-521-5078
Bow Handle

375215078
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81018145: RNCC: 3 | RNVC: 2
A81018145-01: RNCC: 5 | RNVC: 2

29 Jun 2011

5340-37-519-6209
Access Cover

375196209
A20009651: RNCC: 3 | RNVC: 2
A20009651: RNCC: 5 | RNVC: 2

15 Jun 2010

5340-37-520-1294
Mid Frame

375201294
DM67641A00: RNCC: 3 | RNVC: 2
67641A00: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-37-525-4634
Mounting Bracket

375254634
SM60011047: RNCC: 3 | RNVC: 2

29 Jan 2013

5340-37-502-5393
Manual Control Handle

375025393
60083236: RNCC: 3 | RNVC: 2
60083236: RNCC: 5 | RNVC: 2

24 Nov 1993

5340-37-518-5564
Headless Straight Rod

375185564
WF537886-01: RNCC: 3 | RNVC: 2

17 Aug 2009

5340-37-523-5478
Loop Clamp

375235478
50143308: RNCC: 3 | RNVC: 2
50143308: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-37-520-6289
Mounting Plate

375206289
A20017552: RNCC: 3 | RNVC: 2
A20017552: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-512-0283
Butt Hinge Leaf

375120283
85B6680-053: RNCC: 3 | RNVC: 2
85B6680-053: RNCC: 5 | RNVC: 2

31 May 2005

5340-37-523-7106
Butt Hinge

375237106
60818101: RNCC: 3 | RNVC: 2
60818101: RNCC: 5 | RNVC: 2

13 Jul 2012

5340-37-510-8676
Mounting Bracket

375108676
Q65069641: RNCC: 3 | RNVC: 2
Q65069641: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-37-511-2146
Catch Strike

375112146
Q65080193: RNCC: 3 | RNVC: 2
Q65080193: RNCC: 5 | RNVC: 2

15 Sep 2004

5340-37-513-1891
Mounting Plate

375131891
Q55028743: RNCC: 3 | RNVC: 2
Q55028743: RNCC: 5 | RNVC: 2

7 Aug 2006

5340-37-512-8694
Guide

375128694
Q25022762: RNCC: 3 | RNVC: 2
Q25022762: RNCC: 5 | RNVC: 2

27 Feb 2006

5340-37-516-0442
Side Panel

375160442
91028324: RNCC: 3 | RNVC: 2
91028324: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-130-1186
Loop Clamp

371301186
KG0143203: RNCC: 3 | RNVC: 2
5340-97-130-1186: RNCC: 5 | RNVC: 9
5340-97-130-1186: RNCC: 5 | RNVC: 9
601 20 033: RNCC: 5 | RNVC: 9
601 20 033: RNCC: 5 | RNVC: 9

28 Nov 1989

5340-37-506-1500
Angle Bracket

375061500
81536357: RNCC: 3 | RNVC: 2
81536357-02: RNCC: 5 | RNVC: 2

11 Aug 1999

5340-37-511-7560
Angle Bracket

375117560
85PF9570-221: RNCC: 3 | RNVC: 2
85PF9570-221: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-37-526-0266
A5 Cover Block

375260266
91040314: RNCC: 3 | RNVC: 2
91040314: RNCC: 5 | RNVC: 2

15 Apr 2013

5340-37-510-6480
Double Angle Bracket

375106480
60574282: RNCC: 3 | RNVC: 2
60574282: RNCC: 5 | RNVC: 2

23 Apr 2004

5340-37-526-5788
Mounting Bracket

375265788
81077930: RNCC: 3 | RNVC: 2
81077930: RNCC: 5 | RNVC: 2

5 Aug 2013

5340-37-515-0302
T Bracket

375150302
50136920: RNCC: 3 | RNVC: 2
50136920: RNCC: 5 | RNVC: 2

15 Apr 2008

5340-37-505-0876

5340-37-513-0046
Blacket Weldment

375130046
Q25021605: RNCC: 3 | RNVC: 2
Q25021605: RNCC: 5 | RNVC: 2

14 Apr 2006

5340-37-526-1151
Mounting Plate

375261151
91026377: RNCC: 3 | RNVC: 2
91026377: RNCC: 5 | RNVC: 2

22 May 2013

5340-37-507-3048
Upper Buffer Ass'y

375073048
20110650: RNCC: 5 | RNVC: 9

28 Aug 2000

5340-37-514-9390
Mounting Bracket

375149390
50139365: RNCC: 3 | RNVC: 2
50139365: RNCC: 5 | RNVC: 2

1 Apr 2008

5340-37-512-5237
Manual Control Lever

375125237
Q65083737: RNCC: 3 | RNVC: 2
Q65083737-2: RNCC: 3 | RNVC: 2
Q65083737: RNCC: 3 | RNVC: 2

2 Sep 2005

5340-37-513-0123
Dust And Moisture Seal Protective Cover

375130123
Q25026077-1: RNCC: 3 | RNVC: 2
Q25026077: RNCC: 5 | RNVC: 1
Q25026077-1: RNCC: 5 | RNVC: 2

24 Apr 2006

5340-37-516-7871
Mounting Bracket

375167871
60825321: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60825321: RNCC: 5 | RNVC: 2

12 Mar 2009

5340-37-522-0304
Loop Clamp

375220304
KDS 2350-4003: RNCC: 2 | RNVC: 1
61506039: RNCC: 3 | RNVC: 2
61506039: RNCC: 5 | RNVC: 2

3 Nov 2011

5340-37-517-9832
Mounting Bracket

375179832
60822032: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60822032: RNCC: 5 | RNVC: 2

2 Jul 2009

5340-37-521-2286
Access Cover

375212286
A80026501-01: RNCC: 3 | RNVC: 2
A80026501-01: RNCC: 5 | RNVC: 2
A80026501: RNCC: D | RNVC: 9

27 Apr 2011

5340-37-506-3931
Access Cover

375063931
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341246: RNCC: 3 | RNVC: 2

3 Sep 1999

5340-37-130-2959
Gasket

371302959
60107145: RNCC: 5 | RNVC: 9
60107145: RNCC: 5 | RNVC: 9
5330-97-130-2959: RNCC: 5 | RNVC: 9

17 Dec 1991

5340-37-507-8652
Mounting Bracket

375078652
80261480: RNCC: 3 | RNVC: 2
80261480: RNCC: 5 | RNVC: 2

19 Jun 2001

5340-37-518-4953
Section Block Clamp

375184953
60671168: RNCC: 3 | RNVC: 2
60671168: RNCC: 5 | RNVC: 2

7 Aug 2009

5340-37-508-6042
Catch Strike

375086042
Q65034441: RNCC: 3 | RNVC: 2

16 Feb 2002

5340-37-504-6137
Cushioning Pad

375046137
60044358: RNCC: 3 | RNVC: 2
60044358: RNCC: 5 | RNVC: 2

24 Apr 1997

5340-37-511-4598
Mounting Plate

375114598
Q55111415: RNCC: 3 | RNVC: 2
Q55111415: RNCC: 5 | RNVC: 2

1 Dec 2004

5340-37-504-3218
Bracket

375043218
50090731: RNCC: 5 | RNVC: 9

30 Aug 1996

5340-37-515-5919
Mounting Bracket

375155919
A13-196868-2: RNCC: 3 | RNVC: 1
A14-235495-7-040: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-37-502-5044
Access Cover

375025044
60073224: RNCC: 3 | RNVC: 2

18 Oct 1993

5340-37-511-6300
Mete Cover Assembly

375116300
95010350: RNCC: 3 | RNVC: 2
95010350: RNCC: 5 | RNVC: 9

7 Mar 2005

5340-37-505-7548
Snap-In Threaded Standoff

375057548
Q45016440: RNCC: 3 | RNVC: 2

27 May 1999

5340-37-504-4164
Retaining Clip

375044164
61232631: RNCC: 5 | RNVC: 9
61232631: RNCC: 5 | RNVC: 9

5 Oct 1996

5340-37-503-4903
Bracket Assembly

375034903
KDS 2350-1004: RNCC: 2 | RNVC: 1
60642775: RNCC: 5 | RNVC: 9

25 Sep 1995

5340-37-525-1302
Mounting Plate

375251302
A40003731-2: RNCC: 3 | RNVC: 2
A40003731-2: RNCC: 5 | RNVC: 2
A40003731: RNCC: D | RNVC: 9

7 Jan 2013

5340-37-519-1338
Mounting Bracket

375191338
WF535551-01: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-517-3202
Section Block Clamp

375173202
61533568: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61533568: RNCC: 5 | RNVC: 2

2 Jun 2009

5340-37-517-8823
Guard Cover

375178823
154-54-12182: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-37-517-9285
Mounting Bracket

375179285
WF331310-01: RNCC: 3 | RNVC: 2

1 Jul 2009

5340-37-506-5904
Angle Bracket

375065904
KDS 5855-1024: RNCC: 2 | RNVC: 1
40014200: RNCC: 3 | RNVC: 2

2 Nov 1999

5340-37-500-6611
T Bracket

375006611
80022981: RNCC: 3 | RNVC: 2
80022982: RNCC: 5 | RNVC: 9

8 Jun 1992

5340-37-508-3179
Guide Block

375083179
95008345: RNCC: 3 | RNVC: 2

30 Nov 2001

5340-37-518-0705
Floor Support

375180705
60824991: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60824991: RNCC: 5 | RNVC: 2

8 Jul 2009

5340-37-506-1164
Manual Control Handle

375061164
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341475: RNCC: 3 | RNVC: 2

9 Aug 1999

5340-37-522-5402
Angle Bracket

375225402
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85E1747-661: RNCC: 3 | RNVC: 2
85E1747-661: RNCC: 5 | RNVC: 2

27 Jan 2012

5340-37-512-2295
Fixed Shaft

375122295
81536390-01: RNCC: 3 | RNVC: 2
81536390: RNCC: 5 | RNVC: 1
81536390-01: RNCC: 5 | RNVC: 2
AMS5629: RNCC: 5 | RNVC: 2

6 Jul 2005

5340-37-523-4429
Block

375234429
A60079885-1: RNCC: 3 | RNVC: 2
A60079885-1: RNCC: 5 | RNVC: 2

13 Jun 2012

5340-37-505-5471
Angle Bracket

375055471
KDS 1510-1003: RNCC: 2 | RNVC: 1
81212723: RNCC: 5 | RNVC: 9
81212723-01: RNCC: 5 | RNVC: 9

24 Feb 1999

5340-37-510-5117
Locking Plate

375105117
20104353: RNCC: 3 | RNVC: 2
20104355: RNCC: 3 | RNVC: 2

20 Mar 2004

5340-37-510-5684
Window Retaining Plate

375105684
80074295: RNCC: 3 | RNVC: 1
80074295: RNCC: 5 | RNVC: 9

1 Apr 2004

5340-37-519-6918
Spacing Threaded Standoff

375196918
A20008705: RNCC: 3 | RNVC: 2
A20008705: RNCC: 5 | RNVC: 2

5 Jul 2010

5340-37-520-4106
Access Cover

375204106
A60025210: RNCC: 3 | RNVC: 2
A60025210: RNCC: 5 | RNVC: 2

6 Dec 2010

5340-37-523-7819
Track Guide Bracket

375237819
A60081030: RNCC: 3 | RNVC: 2
A60081030: RNCC: 5 | RNVC: 2

18 Jul 2012

5340-37-522-4941
Mounting Bracket

375224941
50139173: RNCC: 3 | RNVC: 2
50139173: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-37-501-8144
Angle Bracket

375018144
60746522: RNCC: 3 | RNVC: 2
60746522: RNCC: 5 | RNVC: 2

9 Mar 1991

5340-37-521-6653
Angle Bracket

375216653
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81026306: RNCC: 3 | RNVC: 2
A81026306-01: RNCC: 5 | RNVC: 2

28 Jul 2011

5340-37-507-0981
Mounting Plate

375070981
20101020: RNCC: 5 | RNVC: 9

15 May 2000

5340-37-513-9812
Mounting Bracket

375139812
Q55029040: RNCC: 3 | RNVC: 2
Q55029040: RNCC: 5 | RNVC: 2

28 Aug 2007

5340-37-519-7718
Loop Holder

375197718
HSRF-100M-03: RNCC: 3 | RNVC: 2

16 Jul 2010

5340-37-518-5019
Webbing Strap

375185019
20032-174: RNCC: 5 | RNVC: 2
20032-174: RNCC: 5 | RNVC: 2

10 Aug 2009

5340-37-518-3915
Bracket

375183915
AD4.132.015: RNCC: 5 | RNVC: 1

28 Jul 2009

5340-37-503-1125
Resilient Mount Plate

375031125
60311291: RNCC: 3 | RNVC: 2

21 Nov 1994

5340-37-503-1530
Step

375031530
60312555: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-37-518-0949
Guide

375180949
10301.5114.040: RNCC: 3 | RNVC: 2

14 Jul 2009

5340-37-525-4882
Bumper

375254882
KD-118R-5: RNCC: 3 | RNVC: 2
KD-118R-5: RNCC: 3 | RNVC: 2

31 Jan 2013

5340-37-518-5909
Mounting Plate

375185909
WF535716-01: RNCC: 3 | RNVC: 2

24 Aug 2009

5340-37-517-9819
Nut And Bolt Retainer

375179819
WF272455-02: RNCC: 3 | RNVC: 2

2 Jul 2009

5340-37-521-2910
Access Cover

375212910
KDS4230-4001: RNCC: 2 | RNVC: 1
Q75013113: RNCC: 3 | RNVC: 2
Q75013113: RNCC: 5 | RNVC: 2

12 May 2011

5340-37-519-3476
Mounting Bracket

375193476
85P6762-807: RNCC: 3 | RNVC: 2
85P6762-807: RNCC: 5 | RNVC: 2

18 Mar 2010

5340-37-518-6863
Access Cover

375186863
61523225: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61523225: RNCC: 5 | RNVC: 2

28 Sep 2009

5340-37-521-9525
Rim Latch

375219525
KDS 2350-4004: RNCC: 2 | RNVC: 1
A60027277: RNCC: 3 | RNVC: 2
C-1238-4: RNCC: 3 | RNVC: 2
A60027277: RNCC: 5 | RNVC: 2

11 Oct 2011

5340-37-521-0720
Mounting Plate

375210720
A81016339: RNCC: 3 | RNVC: 2
A81016339-01: RNCC: 3 | RNVC: 2
A81016339-01: RNCC: 5 | RNVC: 2

4 Apr 2011

5340-37-518-0799
Mounting Bracket

375180799
WF291408-01: RNCC: 3 | RNVC: 2

9 Jul 2009

5340-37-512-9727
Ammunition Lo Guide

375129727
Q25025577-2: RNCC: 3 | RNVC: 2
Q25025577: RNCC: 5 | RNVC: 1
Q25025577-2: RNCC: 5 | RNVC: 2

31 Mar 2006

5340-37-506-4799
Angle Bracket

375064799
81954308: RNCC: 5 | RNVC: 9
81954308-01: RNCC: 5 | RNVC: 9

18 Sep 1999

5340-37-505-7057
Bracket Assembly

375057057
KDS 1510-1003: RNCC: 2 | RNVC: 1
81291109: RNCC: 3 | RNVC: 2
81291109-01: RNCC: 5 | RNVC: 2

14 May 1999

5340-37-522-7936
Access Cover

375227936
KDC 2010-T4001: RNCC: 2 | RNVC: 1
DSN1140-4605: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-37-519-1327
Mounting Plate

375191327
WF535463-01: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-514-8422
Cushioning Pad

375148422
50139273: RNCC: 3 | RNVC: 2
50139273: RNCC: 5 | RNVC: 2

14 Mar 2008

5340-37-501-9535
Lock Plunger

375019535
KDS 1010-1246: RNCC: 2 | RNVC: 1
20024566: RNCC: 3 | RNVC: 2

5 Aug 1991

5340-37-521-2823
Block Clamp

375212823
KDS1240-4001-2: RNCC: 2 | RNVC: 1
Q65021989: RNCC: 3 | RNVC: 2
Q65021989: RNCC: 5 | RNVC: 2

11 May 2011

5340-37-525-7204
Mounting Plate

375257204
A50041957: RNCC: 3 | RNVC: 2
A50041957: RNCC: 5 | RNVC: 2

7 Mar 2013

5340-37-524-0863
Bottom Panel Assemb

375240863
91039463: RNCC: 3 | RNVC: 2
91039463: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-513-1025
Mounting Plate

375131025
80017563: RNCC: 3 | RNVC: 2
80017563: RNCC: 5 | RNVC: 2

11 Jul 2006

5340-37-512-8728
Retaining Strap

375128728
Q25028114: RNCC: 3 | RNVC: 2
Q25028114: RNCC: 5 | RNVC: 2

27 Feb 2006

5340-37-507-8361
Clevis Bracket Asse

375078361
60704272: RNCC: 3 | RNVC: 2
60704272: RNCC: 3 | RNVC: 2
60704272: RNCC: 5 | RNVC: 2

23 May 2001

5340-37-508-4369
Spring Holding Pin

375084369
20119161: RNCC: 3 | RNVC: 2
20119161: RNCC: 5 | RNVC: 2

7 Jan 2002

5340-37-515-2876
Mounting Plate

375152876
50146909: RNCC: 3 | RNVC: 2
50146909: RNCC: 5 | RNVC: 2

22 May 2008

5340-37-511-1135
Mounting Plate

375111135
Q55608493: RNCC: 3 | RNVC: 2
Q55608493: RNCC: 5 | RNVC: 2

25 Aug 2004

5340-37-519-3201
Access Door Hinge

375193201
81365100: RNCC: 3 | RNVC: 2
81365100: RNCC: 5 | RNVC: 2

11 Mar 2010

5340-37-511-1453
Mounting Bracket

375111453
60671533: RNCC: 3 | RNVC: 2
60671533: RNCC: 5 | RNVC: 2

1 Sep 2004

5340-37-502-6157
Access Cover

375026157
60074401: RNCC: 3 | RNVC: 2

11 Mar 1994

5340-37-522-3684
Bow Handle

375223684
UWAN10-120-27: RNCC: 3 | RNVC: 2
UWAN10-120-27: RNCC: 5 | RNVC: 2

21 Dec 2011

5340-37-518-7370
Seal Retaining Plate

375187370
61502027: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61502027: RNCC: 5 | RNVC: 2

16 Oct 2009

5340-37-522-2866
Angle Bracket

375222866
KDS 2350-4003: RNCC: 2 | RNVC: 1
61507500: RNCC: 3 | RNVC: 2
61507500: RNCC: 5 | RNVC: 2

11 Dec 2011

5340-37-508-7682
Loop Clamp

375087682
DA-3N: RNCC: 3 | RNVC: 2
KDS 1230-4002: RNCC: 4 | RNVC: 1

3 Apr 2002

5340-37-517-6468
Mounting Bracket

375176468
60827202: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60827202: RNCC: 5 | RNVC: 2

22 Jun 2009

5340-37-514-0764
Thumb Latch

375140764
KDS 2320-4006: RNCC: 2 | RNVC: 1
A60017417: RNCC: 3 | RNVC: 2
A60017417: RNCC: 5 | RNVC: 2

19 Sep 2007

5340-37-520-6716
Threaded Rod End

375206716
92003018: RNCC: 3 | RNVC: 2
92003018: RNCC: 5 | RNVC: 2

18 Jan 2011

5340-37-514-2051
Masking Plate

375142051
50129736: RNCC: 3 | RNVC: 2
50129736: RNCC: 5 | RNVC: 2

29 Oct 2007

5340-37-514-1007
Mounting Block

375141007
50144873: RNCC: 3 | RNVC: 2
50144873: RNCC: 5 | RNVC: 2

1 Oct 2007

5340-37-504-4083
Mounting Plate

375044083
50095976: RNCC: 5 | RNVC: 9

3 Oct 1996

5340-37-515-7630
Mounting Bracket

375157630
83014626: RNCC: 3 | RNVC: 2
83014626: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-525-4737
Mounting Bracket

375254737
91044831: RNCC: 3 | RNVC: 2
91044831: RNCC: 5 | RNVC: 2

31 Jan 2013

5340-37-512-8081
Horizontal Gri Link

375128081
Q25027065: RNCC: 3 | RNVC: 2
Q25027065: RNCC: 5 | RNVC: 2

6 Feb 2006

5340-37-512-8469
Frame

375128469
Q25022718: RNCC: 3 | RNVC: 2
Q25022718: RNCC: 5 | RNVC: 2

20 Feb 2006

5340-37-525-4749
Mounting Bracket

375254749
91045109: RNCC: 3 | RNVC: 2
91045109: RNCC: 5 | RNVC: 2

31 Jan 2013

5340-37-518-8665
Mounting Bracket

375188665
92003363: RNCC: 3 | RNVC: 2
92003363: RNCC: 5 | RNVC: 2

19 Nov 2009

5340-37-517-6533
Mounting Bracket

375176533
WF273106-01: RNCC: 3 | RNVC: 2

24 Jun 2009

5340-37-513-1064
Base

375131064
KDS 1430-1017: RNCC: 2 | RNVC: 1
80017115: RNCC: 3 | RNVC: 2
80017115: RNCC: 5 | RNVC: 2

12 Jul 2006

5340-37-521-2658
Metal Grille

375212658
KDS 2350-4003: RNCC: 2 | RNVC: 1
61523430: RNCC: 3 | RNVC: 2
61523430: RNCC: 5 | RNVC: 2

6 May 2011

5340-37-522-2028
Mounting Bracket

375222028
KDS 5895-4031: RNCC: 2 | RNVC: 1
50136684: RNCC: 3 | RNVC: 2
50136684: RNCC: 5 | RNVC: 2

28 Nov 2011

5340-37-522-3647
Cushioning Pad

375223647
C-30-RK-20: RNCC: 3 | RNVC: 2
C-30-RK-20: RNCC: 5 | RNVC: 2

21 Dec 2011

5340-37-518-6695
Dust And Moisture Seal Protective Cover

375186695
60822751: RNCC: 3 | RNVC: 2
KDS 1240-4004: RNCC: 4 | RNVC: 1
60822751: RNCC: 5 | RNVC: 2

18 Sep 2009

5340-37-512-9989
Mounting Plate

375129989
60365351: RNCC: 3 | RNVC: 2
60365351: RNCC: 5 | RNVC: 2

13 Apr 2006

5340-37-511-1829
Mounting Bracket

375111829
Q65079575: RNCC: 3 | RNVC: 2
Q65079575: RNCC: 5 | RNVC: 2

7 Sep 2004

5340-37-524-5323
Access Cover

375245323
60831402: RNCC: 3 | RNVC: 2

25 Sep 2012

5340-37-502-8283
Access Cover

375028283
60052042: RNCC: 3 | RNVC: 2

30 Aug 1994

5340-37-520-0970
Retaining Band

375200970
A20006203: RNCC: 3 | RNVC: 2
A20006203: RNCC: 5 | RNVC: 2

1 Oct 2010

5340-37-512-8054
Inn Cartridge Guide

375128054
Q25024754-2: RNCC: 3 | RNVC: 2
Q25024754: RNCC: 5 | RNVC: 1
Q25024754-2: RNCC: 5 | RNVC: 2

3 Feb 2006

5340-37-150-0008
Contact Stopper

371500008
KDC 1240-P0002: RNCC: 2 | RNVC: 1
5340-97-150-0008: RNCC: 2 | RNVC: 2
1240-K11-0964: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-525-1832
Mounting Plate

375251832
91044742-01: RNCC: 3 | RNVC: 2
91044742-01: RNCC: 5 | RNVC: 2
91044742: RNCC: D | RNVC: 9

10 Jan 2013

5340-37-503-2480
Reel

375032480
KDS 5985-1023: RNCC: 2 | RNVC: 1
50082871: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-37-513-6326
Access Cover

375136326
KDS 1240-4001: RNCC: 2 | RNVC: 1
A20006310: RNCC: 3 | RNVC: 2
A20006310: RNCC: 5 | RNVC: 2

26 Apr 2007

5340-37-114-0852
Air Cleaner Clamp

371140852
KDC 2510-P0001: RNCC: 2 | RNVC: 1
5340-97-114-0852: RNCC: 2 | RNVC: 2
992819000: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-512-9214
Push Rod

375129214
Q25027404: RNCC: 3 | RNVC: 2
Q25027404: RNCC: 5 | RNVC: 2

14 Mar 2006

5340-37-526-8230
Cushioning Pad

375268230
A70009761: RNCC: 3 | RNVC: 2
A70009761: RNCC: 5 | RNVC: 2

4 Sep 2013

5340-37-512-7994
Double Angle Bracket

375127994
Q55024840: RNCC: 3 | RNVC: 2
Q55024840: RNCC: 5 | RNVC: 2

14 Dec 2005

5340-37-520-4088
Access Cover

375204088
A60025175: RNCC: 3 | RNVC: 2
A60025175: RNCC: 5 | RNVC: 2

6 Dec 2010

5340-37-516-0815
Mounting Plate

375160815
91025564: RNCC: 3 | RNVC: 2
91025564: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-525-4329
Access Cover

375254329
20032656: RNCC: 3 | RNVC: 2
20032656: RNCC: 5 | RNVC: 2

29 Jan 2013

5340-37-524-5573
Double Angle Bracket

375245573
KDS 2350-4003: RNCC: 2 | RNVC: 1
61526731: RNCC: 3 | RNVC: 2
61526731: RNCC: 5 | RNVC: 2

25 Sep 2012

5340-37-518-0716
Snap Hook

375180716
60825014: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60825014: RNCC: 5 | RNVC: 2

8 Jul 2009

5340-37-521-7078
Double Angle Bracket

375217078
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81069111: RNCC: 3 | RNVC: 2
A81069111-01: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-37-518-4702
Mounting Bracket

375184702
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20013353: RNCC: 3 | RNVC: 2
A20013353: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-510-6094
Inner Support

375106094
60577321: RNCC: 3 | RNVC: 2
60577321: RNCC: 3 | RNVC: 2

13 Apr 2004

5340-37-524-2782
Multiple Angle Bracket

375242782
91038227: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-37-514-4335
Left Panel Assembly

375144335
50134418: RNCC: 3 | RNVC: 2
50134418: RNCC: 5 | RNVC: 2

3 Dec 2007

5340-37-526-9203
Mounting Bracket

375269203
85PF7902-205: RNCC: 3 | RNVC: 2
85PF7902-205: RNCC: 5 | RNVC: 2

12 Sep 2013

5340-37-524-0632
Side Panel

375240632
91039216-02: RNCC: 3 | RNVC: 2
91039216-02: RNCC: 5 | RNVC: 2
91039216: RNCC: D | RNVC: 9

8 Aug 2012

5340-37-525-0091
Butt Hinge

375250091
N51008379: RNCC: 3 | RNVC: 2
N51008379: RNCC: 5 | RNVC: 2

7 Dec 2012

5340-37-508-5954
Spring Tension Clip

375085954
Q65035750: RNCC: 3 | RNVC: 2
Q65035754: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-37-523-9023
Rod End Locking Retainer

375239023
60823511: RNCC: 3 | RNVC: 2
60823511: RNCC: 5 | RNVC: 2

30 Jul 2012

5340-37-509-1305
Access Cover

375091305
Q65035480: RNCC: 3 | RNVC: 2
Q65035480: RNCC: 3 | RNVC: 2

10 Aug 2002

5340-37-524-0748
Mounting Bracket

375240748
A60073796: RNCC: 3 | RNVC: 2
A60073796: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-512-0746
Block Clamp

375120746
50125582: RNCC: 3 | RNVC: 2
50125582: RNCC: 5 | RNVC: 2

9 Jun 2005

5340-37-512-6425
Fixture Plate

375126425
AD50001173: RNCC: 3 | RNVC: 2
AD50001173: RNCC: 5 | RNVC: 2

7 Oct 2005

5340-37-507-8167
Mounting Bracket

375078167
Q55601832: RNCC: 5 | RNVC: 9
Q55601832: RNCC: 5 | RNVC: 9

30 Apr 2001

5340-37-512-7645
Access Cover

375127645
Q25021751: RNCC: 3 | RNVC: 2
Q25021751: RNCC: 5 | RNVC: 2

6 Dec 2005

5340-37-509-3972
Direction I Support

375093972
80266230: RNCC: 3 | RNVC: 2
80266230-02: RNCC: 5 | RNVC: 2

30 Nov 2002

5340-37-519-2030
Mounting Bracket

375192030
81362868: RNCC: 3 | RNVC: 2
81362868: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-37-513-4400
Mounting Plate

375134400
Q65025048: RNCC: 3 | RNVC: 2
Q65025048: RNCC: 5 | RNVC: 2

26 Jan 2007

5340-37-507-5848

5340-37-508-7111

5340-37-519-9932
T Bracket

375199932
KDS 1510-4002: RNCC: 2 | RNVC: 1
85B1713-055: RNCC: 3 | RNVC: 2
85B1713-055: RNCC: 5 | RNVC: 2

14 Sep 2010

5340-37-523-1087
Angle Bracket

375231087
KDS 5895-4032: RNCC: 2 | RNVC: 1
50140715: RNCC: 3 | RNVC: 2
50140715: RNCC: 5 | RNVC: 2

2 May 2012

5340-37-520-2901
Dust And Moisture Seal Protective Cap-Plug

375202901
AD71000284: RNCC: 3 | RNVC: 2
KDS6910-4003: RNCC: 4 | RNVC: 1
AD71000284: RNCC: 5 | RNVC: 2

15 Nov 2010

5340-37-507-7451
Double Angle Bracket

375077451
Q55601427: RNCC: 5 | RNVC: 9

21 Mar 2001

5340-37-512-6817
Manual Control Lever

375126817
85GA7514-011: RNCC: 3 | RNVC: 2
85GA7514-011: RNCC: 3 | RNVC: 2

25 Oct 2005

5340-37-505-9618
Mounting Plate

375059618
KDS 2350-1024: RNCC: 2 | RNVC: 1
60347118: RNCC: 3 | RNVC: 2

19 Jul 1999

5340-37-526-2550
Mounting Plate

375262550
81078869: RNCC: 5 | RNVC: 2
81078869: RNCC: D | RNVC: 9

17 Jun 2013

5340-37-516-5260
Mounting Bracket

375165260
20030077: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030077: RNCC: 5 | RNVC: 2

15 Dec 2008

5340-37-506-7498
Butt Hinge

375067498
KDS 1510-4001: RNCC: 2 | RNVC: 1
81575877: RNCC: 5 | RNVC: 9
81575877-01: RNCC: 5 | RNVC: 9

2 Dec 1999

5340-37-519-1919
Mounting Plate

375191919
A80015080: RNCC: 3 | RNVC: 2
A80015080: RNCC: 5 | RNVC: 2

25 Jan 2010

5340-37-507-0126
Mounting Plate

375070126
95001500: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-37-510-7869
Retaining Strap

375107869
60574724: RNCC: 3 | RNVC: 2
60574724-4: RNCC: 3 | RNVC: 2
60574724: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-37-525-2834
Mounting Bracket

375252834
KDS 6930-4005: RNCC: 2 | RNVC: 1
61512638: RNCC: 3 | RNVC: 2
61512638: RNCC: 5 | RNVC: 2

16 Jan 2013

5340-37-518-5514
Mounting Bracket

375185514
A20012772: RNCC: 3 | RNVC: 2
A20012772: RNCC: 5 | RNVC: 2

17 Aug 2009

5340-37-518-5597
Dust And Moisture Seal Protective Cover

375185597
WF535511-01: RNCC: 3 | RNVC: 2

18 Aug 2009

5340-37-511-1516
Bracket.Chain

375111516
60444945: RNCC: 3 | RNVC: 2
60444945: RNCC: 5 | RNVC: 2

3 Sep 2004

5340-37-512-8275
Angle Bracket

375128275
Q25023045: RNCC: 3 | RNVC: 2
Q25023045: RNCC: 5 | RNVC: 2

14 Feb 2006

5340-37-513-3339
Insulation Case

375133339
Q65024896: RNCC: 3 | RNVC: 2
Q65024896: RNCC: 5 | RNVC: 2

12 Dec 2006

5340-37-512-5035
Support Hook

375125035
Q65062688: RNCC: 3 | RNVC: 2
Q65062688: RNCC: 3 | RNVC: 2

1 Sep 2005

5340-37-523-7910
Mounting Plate

375237910
A60078737: RNCC: 3 | RNVC: 2
A60078737: RNCC: 5 | RNVC: 2

18 Jul 2012

5340-37-520-3829
Mounting Bracket

375203829
A80026160: RNCC: 3 | RNVC: 2
A80026160: RNCC: 5 | RNVC: 2

1 Dec 2010

5340-37-524-5198
Dust And Moisture Seal Protective Cover

375245198
Q65303287: RNCC: 3 | RNVC: 2
Q65303287: RNCC: 5 | RNVC: 2

24 Sep 2012

5340-37-519-1844
Mounting Bracket

375191844
81362282: RNCC: 3 | RNVC: 2
81362282: RNCC: 5 | RNVC: 2

22 Jan 2010

5340-37-521-7535
Mounting Bracket

375217535
Q95015607: RNCC: 3 | RNVC: 2
Q95015607: RNCC: 5 | RNVC: 2

29 Aug 2011

5340-37-524-0361
Dust And Moisture Seal Protective Cover

375240361
60833572-1: RNCC: 3 | RNVC: 2
60833572-1: RNCC: 5 | RNVC: 2
60833572: RNCC: D | RNVC: 9

8 Aug 2012

5340-37-512-1660
Access Cover

375121660
85B5512-067: RNCC: 3 | RNVC: 2
85B5512-067: RNCC: 5 | RNVC: 2

24 Jun 2005

5340-37-520-0896
Angle Bracket

375200896
KDS 1510-4002: RNCC: 2 | RNVC: 1
85B1881-013: RNCC: 3 | RNVC: 2
85B1881-013: RNCC: 5 | RNVC: 2

30 Sep 2010

5340-37-524-5555
Dust And Moisture Seal Protective Cover

375245555
KDS 2350-4003: RNCC: 2 | RNVC: 1
61529270: RNCC: 3 | RNVC: 2
61529270: RNCC: 5 | RNVC: 2

25 Sep 2012

5340-37-114-4962
Loop Clamp

371144962
KDC 2510-P0007: RNCC: 2 | RNVC: 1
2510-97-114-4962: RNCC: 3 | RNVC: 2
60418303: RNCC: 3 | RNVC: 2
KDS 2320-1005: RNCC: 4 | RNVC: 1

20 Apr 1992

5340-37-512-6831
Angle Bracket

375126831
85GA7541-003: RNCC: 3 | RNVC: 2
85GA7541-003: RNCC: 3 | RNVC: 2

25 Oct 2005

5340-37-525-7704
Mounting Bracket

375257704
N51006912: RNCC: 3 | RNVC: 2
N51006912: RNCC: 5 | RNVC: 2

14 Mar 2013

5340-37-520-6391
Mounting Plate

375206391
A20017798: RNCC: 3 | RNVC: 2
A20017798: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-501-4630
Spring Tension Clip

375014630
60721213: RNCC: 3 | RNVC: 2
60721213: RNCC: 5 | RNVC: 2

22 Dec 1989

5340-37-522-5425
Lock Key

375225425
60312295: RNCC: 3 | RNVC: 2
60312295: RNCC: 5 | RNVC: 2

30 Jan 2012

5340-37-519-5882
Turnbuckle

375195882
A20008888: RNCC: 3 | RNVC: 2
A20008888: RNCC: 5 | RNVC: 2

10 Jun 2010

5340-37-517-5909
Mounting Bracket

375175909
60821865: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60821865: RNCC: 5 | RNVC: 2

18 Jun 2009

5340-37-526-8730
Mounting Plate

375268730
430000-00061000: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-37-512-1671
Access Cover

375121671
85B5514-014: RNCC: 3 | RNVC: 2
85B5514-013: RNCC: 5 | RNVC: 1
85B5514-014: RNCC: 5 | RNVC: 2

24 Jun 2005

5340-37-526-1978
Mounting Plate

375261978
91027444-01: RNCC: 3 | RNVC: 2
91027444-01: RNCC: 5 | RNVC: 2
91027444: RNCC: D | RNVC: 9

11 Jun 2013

5340-37-521-9753
Mounting Bracket

375219753
KDS 2350-4003: RNCC: 2 | RNVC: 1
61545102: RNCC: 3 | RNVC: 2
61545102: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-37-521-9883
Retaining Strap

375219883
KDS 2350-4003: RNCC: 2 | RNVC: 1
61502875: RNCC: 3 | RNVC: 2
61502875: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-37-521-6740
Butt Hinge Leaf

375216740
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81034344: RNCC: 3 | RNVC: 2
A81034344-01: RNCC: 5 | RNVC: 2

28 Jul 2011

5340-37-522-2054
Mounting Bracket

375222054
KDS 5895-4031: RNCC: 2 | RNVC: 1
50137501: RNCC: 3 | RNVC: 2
50137501: RNCC: 5 | RNVC: 2

28 Nov 2011

5340-37-503-4688
Support

375034688
60625118: RNCC: 5 | RNVC: 9

9 Aug 1995

5340-37-507-8355
Access Cover

375078355
Q55020831: RNCC: 3 | RNVC: 2
Q55020831: RNCC: 3 | RNVC: 2
Q55020831: RNCC: 5 | RNVC: 2

22 May 2001

5340-37-502-5053
Bridge Clamp

375025053
60073526: RNCC: 3 | RNVC: 2

19 Oct 1993

5340-37-524-7564
Righ Plate Assembly

375247564
N51008361: RNCC: 3 | RNVC: 2
N51008361: RNCC: 5 | RNVC: 2

25 Oct 2012

5340-37-160-0932

5340-37-520-6615
Mounting Plate

375206615
KDS 1005-1389: RNCC: 2 | RNVC: 1
Q55607007: RNCC: 3 | RNVC: 2
Q55607007: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-520-1487
Mounting Bracket

375201487
A80026059-01: RNCC: 3 | RNVC: 2
A80026059-01: RNCC: 5 | RNVC: 2
A80026059: RNCC: D | RNVC: 9

21 Oct 2010

5340-37-521-8373
Angle Bracket

375218373
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81061397: RNCC: 3 | RNVC: 2
A81061397-01: RNCC: 5 | RNVC: 2

15 Sep 2011

5340-37-518-3335
Anode

375183335
338-60218-2: RNCC: 3 | RNVC: 2
338-60218-2: RNCC: 5 | RNVC: 2

28 Jul 2009

5340-37-514-9744
Mounting Bracket

375149744
50140668: RNCC: 3 | RNVC: 2
50140668: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-37-510-7041
Cushioning Pad

375107041
70020516: RNCC: 3 | RNVC: 2
70020516: RNCC: 5 | RNVC: 2

1 May 2004

5340-37-518-7556
Lever Bracket

375187556
60815406: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60815406: RNCC: 5 | RNVC: 2

23 Oct 2009

5340-37-518-9344
Mounting Plate

375189344
60819828: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60819828: RNCC: 5 | RNVC: 2

1 Dec 2009

5340-37-556-5183
Joint

375565183
23A-43-14160: RNCC: 5 | RNVC: 1

31 Mar 2004

5340-37-524-1033
Door Grip Assembly

375241033
A60077314-4: RNCC: 3 | RNVC: 2
A60077314-4: RNCC: 5 | RNVC: 2

12 Aug 2012

5340-37-523-4869
Plain Solid Disk

375234869
11.41198-0001.E: RNCC: 3 | RNVC: 2

19 Jun 2012

5340-37-520-5448
Access Cover

375205448
KDS 1510-4002: RNCC: 2 | RNVC: 1
85B1411-057: RNCC: 3 | RNVC: 2
85B1411-057: RNCC: 5 | RNVC: 2

13 Dec 2010

5340-37-516-1960
Access Door Hinge

375161960
83033151: RNCC: 3 | RNVC: 2
83033151: RNCC: 5 | RNVC: 2

3 Nov 2008

5340-37-512-5851
Access Cover

375125851
Q55404144: RNCC: 3 | RNVC: 2
Q55404144: RNCC: 5 | RNVC: 2

15 Sep 2005

5340-37-525-6963
Mounting Bracket

375256963
A60046200: RNCC: 3 | RNVC: 2
A60046200: RNCC: 5 | RNVC: 2

5 Mar 2013

5340-37-507-3714
Catch Strike

375073714
60335970: RNCC: 3 | RNVC: 2
60335970: RNCC: 5 | RNVC: 2

20 Sep 2000

5340-37-525-5819
Plate Assembly

375255819
83045491: RNCC: 3 | RNVC: 2

14 Feb 2013

5340-37-526-3819
Mounting Bracket

375263819
3534006: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-37-526-8943
Mounting Bracket

375268943
A81063694-01: RNCC: 3 | RNVC: 2
A81063694-01: RNCC: 5 | RNVC: 2
A81063694: RNCC: D | RNVC: 9

11 Sep 2013

5340-37-521-3910
Angle Bracket

375213910
KDS2350-4005: RNCC: 2 | RNVC: 1
A60072207: RNCC: 3 | RNVC: 2
A60072207: RNCC: 5 | RNVC: 2

1 Jun 2011

5340-37-511-4644
Recess Handle

375114644
Q55111426: RNCC: 3 | RNVC: 2
Q55111426: RNCC: 5 | RNVC: 2

4 Jan 2005

5340-37-502-7875
Support Assembly

375027875
60086226: RNCC: 3 | RNVC: 2

13 Jul 1994

5340-37-527-0256
Dust And Moisture Seal Protective Cap

375270256
998 5433: RNCC: 3 | RNVC: 2

8 Oct 2013

5340-37-502-8143
Manual Control Lever

375028143
60077020: RNCC: 3 | RNVC: 2

9 Aug 1994

5340-37-516-8869
Block Clamp

375168869
80096105: RNCC: 3 | RNVC: 2
80096105: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-505-3312
Mounting Plate

375053312
50104610: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-37-509-4121
Angle Bracket

375094121
Q55022300: RNCC: 3 | RNVC: 2
Q55022300: RNCC: 3 | RNVC: 2
Q55022300: RNCC: 3 | RNVC: 9

5 Dec 2002

5340-37-512-6441
Upper Plate

375126441
20170045: RNCC: 3 | RNVC: 2
20170045: RNCC: 5 | RNVC: 2

10 Oct 2005

5340-37-526-5426
Nut And Bolt Locking Plate

375265426
61516238-2: RNCC: 3 | RNVC: 2
61516238-2: RNCC: 5 | RNVC: 2
61516238: RNCC: D | RNVC: 9

31 Jul 2013

5340-37-508-2140
Door Assembly

375082140
Q55106657: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-37-502-8266
Support Assembly

375028266
60049102: RNCC: 3 | RNVC: 2
60049101: RNCC: 3 | RNVC: 2

29 Aug 1994

5340-37-525-7996
Mounting Bracket

375257996
95014505: RNCC: 3 | RNVC: 2
95014505: RNCC: 5 | RNVC: 2

17 Mar 2013

5340-37-526-2012
Mounting Bracket

375262012
91028000: RNCC: 3 | RNVC: 2
91028000: RNCC: 5 | RNVC: 2

12 Jun 2013

5340-37-520-8854
Mounting Plate

375208854
Q55607761: RNCC: 3 | RNVC: 2
Q55607761: RNCC: 5 | RNVC: 2

24 Feb 2011

5340-37-527-0246
Mounting Bracket

375270246
81076714: RNCC: 3 | RNVC: 2
81076714: RNCC: 5 | RNVC: 2

8 Oct 2013

5340-37-526-1568
Mounting Plate

375261568
91026943: RNCC: 3 | RNVC: 2
91026943: RNCC: 5 | RNVC: 2

31 May 2013

5340-37-520-7681
Mounting Bracket

375207681
A81140118: RNCC: 3 | RNVC: 2
A8114011801: RNCC: 3 | RNVC: 2
A8114011801: RNCC: 5 | RNVC: 2

9 Feb 2011

5340-37-516-6296
Spring Holder

375166296
61547761: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61547761: RNCC: 5 | RNVC: 2

30 Jan 2009

5340-37-517-8025
Access Cover

375178025
60833013: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60833013: RNCC: 5 | RNVC: 2

29 Jun 2009

5340-37-505-9762
Butt Hinge

375059762
65L6H: RNCC: 3 | RNVC: 2
Q55016407: RNCC: 5 | RNVC: 2

21 Jul 1999

5340-37-502-5963
Cushioning Pad

375025963
60753123: RNCC: 3 | RNVC: 2
60753123: RNCC: 5 | RNVC: 2

24 Feb 1994

5340-37-518-5621
Mounting Plate

375185621
A20010852: RNCC: 3 | RNVC: 2
A20010852: RNCC: 5 | RNVC: 2

18 Aug 2009

5340-37-525-7976
Mounting Bracket

375257976
95010030-3: RNCC: 3 | RNVC: 2
95010030-3: RNCC: 5 | RNVC: 2
95010030: RNCC: D | RNVC: 9

17 Mar 2013

5340-37-510-7043
Angle Bracket

375107043
70020518: RNCC: 3 | RNVC: 2
70020518: RNCC: 5 | RNVC: 2

1 May 2004

5340-37-501-5308
Angle Bracket

375015308
60771479: RNCC: 3 | RNVC: 2
60771479: RNCC: 5 | RNVC: 2

13 Mar 1990

5340-37-514-7584
Mounting Bracket

375147584
50138913: RNCC: 3 | RNVC: 2
50138913: RNCC: 5 | RNVC: 2

3 Mar 2008

5340-37-519-2812
Mounting Bracket

375192812
81364328: RNCC: 3 | RNVC: 2
81364328: RNCC: 5 | RNVC: 2

5 Mar 2010

5340-37-525-4068
Mounting Bracket

375254068
50168380: RNCC: 3 | RNVC: 2

23 Jan 2013

5340-37-522-7806
Mounting Plate

375227806
50143380: RNCC: 3 | RNVC: 2
50143380: RNCC: 5 | RNVC: 2

29 Feb 2012

5340-37-519-2987
Mounting Plate

375192987
81363189: RNCC: 3 | RNVC: 2
81363189: RNCC: 5 | RNVC: 2

8 Mar 2010

5340-37-519-4286
Bow Handle

375194286
81365791: RNCC: 3 | RNVC: 2
81365791: RNCC: 5 | RNVC: 2

9 Apr 2010

5340-37-140-0079
Spacer

371400079
KDS 1055-1005: RNCC: 2 | RNVC: 1
5340-97-140-0079: RNCC: 3 | RNVC: 2

13 Mar 1995

5340-37-518-7864
Hinge Torsion Bar

375187864
60815722: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60815722: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-527-1532
Block Clamp

375271532
A50046432: RNCC: 3 | RNVC: 2
A50046432: RNCC: 5 | RNVC: 2

15 Oct 2013

5340-37-500-4597
Access Cover

375004597
KDS 1055-1018: RNCC: 2 | RNVC: 1
20018127: RNCC: 5 | RNVC: 9

24 May 1989

5340-37-502-0602
Injection P Bracket

375020602
60630257: RNCC: 5 | RNVC: 2
60630257: RNCC: 5 | RNVC: 9
65,11003-0018: RNCC: 5 | RNVC: 9

11 Nov 1991

5340-37-521-6309
Dust And Moisture Seal Protective Cap

375216309
85B5206-505: RNCC: 3 | RNVC: 2

21 Jul 2011

5340-37-524-0928
Housing Fixed Block

375240928
91039748: RNCC: 3 | RNVC: 2
91039748: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-505-7258
Extension Drawer Slide

375057258
Q45016201: RNCC: 3 | RNVC: 2

19 May 1999

5340-37-520-5890
Pipe Hanger

375205890
A60023786: RNCC: 3 | RNVC: 2
A60023786: RNCC: 5 | RNVC: 2

17 Dec 2010

5340-37-515-1571
Mounting Bracket

375151571
Q45022057: RNCC: 3 | RNVC: 2
Q45022057: RNCC: 5 | RNVC: 2

6 May 2008

5340-37-523-7110
Butt Hinge Leaf

375237110
60818408: RNCC: 3 | RNVC: 2
60818408: RNCC: 5 | RNVC: 2

13 Jul 2012

5340-37-508-9092
Mounting Bracket

375089092
Q55401303: RNCC: 5 | RNVC: 2

20 May 2002

5340-37-514-9775
Access Cover

375149775
50140666: RNCC: 3 | RNVC: 2
50140666: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-37-510-9961
Lower Retainer

375109961
Q65067699: RNCC: 3 | RNVC: 2
Q65067699: RNCC: 5 | RNVC: 2

27 Jul 2004

5340-37-506-5215
Pad Eye

375065215
KDS 3010-1042: RNCC: 2 | RNVC: 1
KDC 1025-P0004: RNCC: 2 | RNVC: 1
60358924: RNCC: 3 | RNVC: 2

19 Oct 1999

5340-37-518-5698
Mounting Bracket

375185698
WF393131-01: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-37-507-3478
Drain Plate

375073478
KDS 1285-1011: RNCC: 2 | RNVC: 1
Q55014073: RNCC: 3 | RNVC: 2
Q55014073: RNCC: 5 | RNVC: 2

8 Sep 2000

5340-37-517-4920
Strap

375174920
45-440-38-831: RNCC: 5 | RNVC: 2

11 Jun 2009

5340-37-510-8623
Retaining Clip

375108623
Q65061491-2: RNCC: 3 | RNVC: 2
Q65061491-2: RNCC: 5 | RNVC: 2
Q65061491: RNCC: D | RNVC: 9

8 Jul 2004

5340-37-516-8651
Mounting Bracket

375168651
80095303: RNCC: 3 | RNVC: 2
80095303: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-526-7099
Butt Hinge

375267099
B-1234: RNCC: 3 | RNVC: 2
B-1234: RNCC: 5 | RNVC: 2

26 Aug 2013

5340-37-523-4576
Loop Clamp

375234576
1611660-8.3: RNCC: 3 | RNVC: 2
1409318-1: RNCC: D | RNVC: 9

13 Jun 2012

5340-37-524-0641
Front Panel

375240641
91039225: RNCC: 3 | RNVC: 2
91039225: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-37-524-1181
Mounting Bracket

375241181
D60838028: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-37-518-4790
Detent Plunger

375184790
A20010882: RNCC: 3 | RNVC: 2
A20010882: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-523-5841
Door Handle Unit

375235841
KDS 2350-4003: RNCC: 2 | RNVC: 1
61509042: RNCC: 3 | RNVC: 2
61509042: RNCC: 5 | RNVC: 2

2 Jul 2012

5340-37-507-0193
Bow Handle

375070193
KDS 2350-1024: RNCC: 2 | RNVC: 1
60340029: RNCC: 3 | RNVC: 2

24 Mar 2000

5340-37-500-9844
Mending Plate

375009844
KDS 2590-1196: RNCC: 2 | RNVC: 1
60651232: RNCC: 5 | RNVC: 9
60651232: RNCC: 5 | RNVC: 9

6 Oct 1989

5340-37-512-5392
Body Shaft

375125392
FTC-85GA8339-029: RNCC: 3 | RNVC: 2
85VG8339-003: RNCC: 5 | RNVC: 1
FTC-85GA8339-029: RNCC: 5 | RNVC: 2

6 Sep 2005

5340-37-512-0719
Mounting Plate

375120719
KDS 1730-4001: RNCC: 2 | RNVC: 2
KDS 1730-4001: RNCC: 3 | RNVC: 2
Q85013750: RNCC: 3 | RNVC: 2
Q85013750: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-37-522-2065
Dust And Moisture Seal Protective Cap

375222065
KDS 5895-4031: RNCC: 2 | RNVC: 1
50137515: RNCC: 3 | RNVC: 2
50137515: RNCC: 5 | RNVC: 2

28 Nov 2011

5340-37-140-1815
Mounting Plate

371401815
1260-97-140-1815: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-37-510-4898
Mounting Bracket

375104898
80075367-02: RNCC: 5 | RNVC: 9

16 Mar 2004

Load More Results