What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Quick Release Plunger?

A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is a Mortise Latch?

A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.

What is a Flush Catch?

A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).

What is a Clamp Bolt Assembly?

A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.

What is a Retaining Band?

A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.

What is a Bow Handle?

A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.

What is a Recess Handle?

A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.

What is a Bail Handle?

A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.

What is a Double Angle Bracket?

A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

What is a Strap Fastener Loop?

A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.

What is a Webbing Strap?

A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.

What is a Spring Tension Clip?

A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.

Hardware, Commercial - Korea (KR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Korea (KR) - NCB is 37

Page 45 of 56

NSN Format for Hardware, Commercial
Codified by Korea

53	40	37	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Korea (KR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 19 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 59 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 32 Items
Holder,Loop 25 Items
Holder,Spring 36 Items
What is a Rod End Connector? 58 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 89 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is a Metal Grille? 15 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 15 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 145 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 25 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 20 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Thumb Latch? 14 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 16 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 11 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Sliding Door Track? 13 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorknob? 12 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Tee Hinge? 11 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 16 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is a Butt Hinge Leaf? 45 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Mending Plate? 21 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 30 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Dust And Moisture Seal Protective Cap? 98 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 116 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 34 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 53 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 97 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 14 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Nut And Bolt Retainer? 12 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is an Angle Bracket? 1486 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 10 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Loop Clamp? 304 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 53 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 26 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 45 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 13 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flush Catch? 10 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 26 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 76 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 234 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 10 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 44 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 255 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 11 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 95 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 116 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 36 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 472 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 49 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 14 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Window Retaining Plate? 35 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 114 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 57 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Helical Compression Spring Seat? 18 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 40 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 42 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 19 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Vent Plug? 29 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 1435 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Threaded Rod End? 80 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 11 Items
What is a Manual Control Handle? 127 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Lever Bracket? 37 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 33 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 254 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 4187 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Section Block Clamp? 134 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Beam Gripping Clamp? 13 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 2701 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Synchro Clamp? 57 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 118 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Threaded Standoff? 11 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 36 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 247 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 33 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Runner? 23 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Track Stop? 13 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 30 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Masking Plate? 18 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 318 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 48 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Sliding Block? 18 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 41 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 25 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Shimmy Damper? 13 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 124 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 21 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Resilient Mount Plate? 12 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 80 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 11 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 91 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Locking Stay? 13 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 26 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Aircraft Latch Hook? 19 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 55 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 45 of 56

5340-37-518-8588
Mounting Bracket

375188588
WF324103-02: RNCC: 3 | RNVC: 2

18 Nov 2009

5340-37-516-5596
Mounting Bracket

375165596
20030511: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030511: RNCC: 5 | RNVC: 2

24 Dec 2008

5340-37-516-5569
Detent Plunger

375165569
20030498: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030498: RNCC: 5 | RNVC: 2

23 Dec 2008

5340-37-512-9991
Access Cover

375129991
60365356: RNCC: 3 | RNVC: 2
60365356: RNCC: 5 | RNVC: 2

13 Apr 2006

5340-37-514-2100
Mounting Bracket

375142100
50129753: RNCC: 3 | RNVC: 2
50129753: RNCC: 5 | RNVC: 2

30 Oct 2007

5340-37-512-5381
Parking Cam Switch

375125381
FTC-85GA8329-017: RNCC: 3 | RNVC: 2
85VG8329-003: RNCC: 5 | RNVC: 1
FTC-85GA8329-017: RNCC: 5 | RNVC: 2

6 Sep 2005

5340-37-514-4967
Front Panel

375144967
50133434: RNCC: 3 | RNVC: 2
50133434: RNCC: 5 | RNVC: 2

12 Dec 2007

5340-37-006-5688
Fuel Filte Packing

370065688
5340-97-006-5688: RNCC: 2 | RNVC: 2
0642000430: RNCC: 3 | RNVC: 2
064-20004-30: RNCC: 5 | RNVC: 9
064-20004-30: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-37-504-9172
Access Cover

375049172
KDS 2320-1023: RNCC: 2 | RNVC: 1
60383690: RNCC: 5 | RNVC: 9
60383691: RNCC: 5 | RNVC: 9
60383690: RNCC: 5 | RNVC: 9
60383691: RNCC: 5 | RNVC: 9

18 Nov 1997

5340-37-521-6018
Mounting Bracket

375216018
KDS5855-4012: RNCC: 2 | RNVC: 1
A40008484: RNCC: 3 | RNVC: 2
A40008484: RNCC: 5 | RNVC: 2

19 Jul 2011

5340-37-522-2260
Mounting Bracket

375222260
KDS 1510-4002: RNCC: 2 | RNVC: 1
85D7130-411: RNCC: 3 | RNVC: 2
85D7130-411: RNCC: 5 | RNVC: 2

29 Nov 2011

5340-37-507-8099
Brake Handle

375078099
Q25018402: RNCC: 5 | RNVC: 9
Q25018402: RNCC: 5 | RNVC: 9

27 Apr 2001

5340-37-557-1770
C-Frame

375571770
F50001108: RNCC: 5 | RNVC: 1

14 Apr 2004

5340-37-132-1414

5340-37-140-0673

5340-37-504-8599
Mounting Plate

375048599
KDS 2320-1023: RNCC: 2 | RNVC: 1
60383280: RNCC: 5 | RNVC: 9
60383280: RNCC: 5 | RNVC: 9

5 Nov 1997

5340-37-518-5686
Mounting Plate

375185686
WF392357-01: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-37-511-9249
Butt Hinge Leaf

375119249
85S2253-015: RNCC: 3 | RNVC: 2
85S2253-015: RNCC: 5 | RNVC: 2

6 May 2005

5340-37-522-5479
Mounting Plate

375225479
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85E6760-603: RNCC: 3 | RNVC: 2
85E6760-603: RNCC: 5 | RNVC: 2

30 Jan 2012

5340-37-526-3107
Locking Stay

375263107
KD-228-1L: RNCC: 3 | RNVC: 2

3 Jul 2013

5340-37-525-5753
Mounting Plate

375255753
KDS 6675-4001: RNCC: 2 | RNVC: 1
50167886: RNCC: 3 | RNVC: 2
50167886: RNCC: 5 | RNVC: 2

14 Feb 2013

5340-37-522-2482
Mounting Bracket

375222482
KDS 2350-4003: RNCC: 2 | RNVC: 1
61507155: RNCC: 3 | RNVC: 2
61507155: RNCC: 5 | RNVC: 2

1 Dec 2011

5340-37-527-0261
Cushioning Pad

375270261
81076708-2: RNCC: 3 | RNVC: 2
81076708-2: RNCC: 5 | RNVC: 2
81076708: RNCC: D | RNVC: 9

8 Oct 2013

5340-37-504-8888
Spring Tension Clip

375048888
KDS 2320-1023: RNCC: 2 | RNVC: 1
60380411: RNCC: 5 | RNVC: 2
60380411: RNCC: 5 | RNVC: 9
60380411: RNCC: 5 | RNVC: 9

12 Nov 1997

5340-37-520-0421
Mounting Plate

375200421
KDS-1015-4003: RNCC: 2 | RNVC: 2
A20013174: RNCC: 3 | RNVC: 2
A20013174: RNCC: 5 | RNVC: 2

27 Sep 2010

5340-37-511-5063
Mounting Plate

375115063
85B5851-027: RNCC: 3 | RNVC: 2
85B5851-027: RNCC: 5 | RNVC: 2

18 Jan 2005

5340-37-506-1847
Rear Soundproof

375061847
KDS 2350-1024: RNCC: 2 | RNVC: 1
60343001: RNCC: 3 | RNVC: 2

14 Aug 1999

5340-37-518-0180
Mounting Bracket

375180180
60822110: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60822110: RNCC: 5 | RNVC: 2

6 Jul 2009

5340-37-520-2465
Rod End Clevis

375202465
10301.0810.413: RNCC: 3 | RNVC: 2

9 Nov 2010

5340-37-511-8417
Angle Bracket

375118417
Q55111824: RNCC: 3 | RNVC: 2
Q55111824: RNCC: 5 | RNVC: 2

14 Apr 2005

5340-37-520-7874
Mounting Bracket

375207874
A81045123: RNCC: 3 | RNVC: 2
A8104512301: RNCC: 3 | RNVC: 2
A8104512301: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-37-500-2899
Spring Tension Clip

375002899
60635296: RNCC: 5 | RNVC: 9

14 Jun 1989

5340-37-522-0949
Mounting Plate

375220949
50142796: RNCC: 3 | RNVC: 2
50142796: RNCC: 5 | RNVC: 2

17 Nov 2011

5340-37-004-1472
Cover Control Box

370041472
KDS 4230-1001: RNCC: 2 | RNVC: 1
5340-97-004-1472: RNCC: 2 | RNVC: 2

23 Nov 1987

5340-37-521-7041
Aircraft Latch Hook

375217041
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81152103: RNCC: 3 | RNVC: 2
A81152103-01: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-37-004-1528
Assembly Drive Arm

370041528
KDS 4230-1001: RNCC: 2 | RNVC: 1
5340-97-004-1528: RNCC: 2 | RNVC: 2
4230-1001-8: RNCC: 3 | RNVC: 2
4410-235-0000133: RNCC: 3 | RNVC: 2
4410-235-0000133: RNCC: 5 | RNVC: 2

23 Nov 1987

5340-37-526-9003
Mounting Bracket

375269003
81079619: RNCC: 3 | RNVC: 2
81079619: RNCC: 5 | RNVC: 2

11 Sep 2013

5340-37-514-6390
Power Supply Case

375146390
50143433: RNCC: 3 | RNVC: 2
50143433: RNCC: 5 | RNVC: 2

22 Jan 2008

5340-37-515-9100
Clamping Catch

375159100
BYODP501: RNCC: 3 | RNVC: 2
BYODP501: RNCC: 5 | RNVC: 2

13 Oct 2008

5340-37-511-1314
Guard

375111314
60671238: RNCC: 3 | RNVC: 2
60671238: RNCC: 5 | RNVC: 2

28 Aug 2004

5340-37-515-2791
Mounting Actuator Plate

375152791
50136278: RNCC: 3 | RNVC: 2
50136278: RNCC: 5 | RNVC: 2

20 May 2008

5340-37-525-5898
Mounting Bracket

375255898
83045639: RNCC: 3 | RNVC: 2

14 Feb 2013

5340-37-526-1979
Access Cover

375261979
91027800: RNCC: 3 | RNVC: 2
91027800: RNCC: 5 | RNVC: 2

11 Jun 2013

5340-37-511-8434
Angle Bracket

375118434
85L5194-301: RNCC: 3 | RNVC: 2
85L5194-301: RNCC: 5 | RNVC: 2

14 Apr 2005

5340-37-522-4783
Mounting Plate

375224783
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85E2320-671: RNCC: 5 | RNVC: 2
85E2320-671: RNCC: D | RNVC: 9

12 Jan 2012

5340-37-515-5845
Mounting Bracket

375155845
A13-168996-9: RNCC: 3 | RNVC: 1
A19-164296-2: RNCC: 3 | RNVC: 2
A14-239179-4-069: RNCC: 5 | RNVC: 2

28 Jul 2008

5340-37-524-3544
Bumper

375243544
D60839930: RNCC: 5 | RNVC: 2

31 Aug 2012

5340-37-515-9526
Quick Release Plunger

375159526
GN615M4KN: RNCC: 3 | RNVC: 2

20 Oct 2008

5340-37-515-6010
Plug

375156010
9S982.100 06: RNCC: 3 | RNVC: 2
9S982.100 06: RNCC: 5 | RNVC: 2

30 Jul 2008

5340-37-522-6509
Handle Grip

375226509
A82011900: RNCC: 3 | RNVC: 2
A82011900: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-37-525-4967
Mounting Plate

375254967
KDS 1290-4007: RNCC: 3 | RNVC: 2
A40014431: RNCC: 3 | RNVC: 2

31 Jan 2013

5340-37-160-1048
Feed Pump Spring

371601048
KDS 2910-1154: RNCC: 2 | RNVC: 1
5340-97-160-1048: RNCC: 2 | RNVC: 2
65.97601-0008: RNCC: 3 | RNVC: 2
A60005885: RNCC: 5 | RNVC: 2

23 Nov 1987

5340-37-512-9200
Dust And Moisture Seal Protective Cover

375129200
Q25025233: RNCC: 3 | RNVC: 2
Q25025233: RNCC: 5 | RNVC: 2

14 Mar 2006

5340-37-507-1233
Support

375071233
20102013: RNCC: 5 | RNVC: 9

30 May 2000

5340-37-004-1346
Link

370041346
KDS 4230-1001: RNCC: 2 | RNVC: 1
5340-97-004-1346: RNCC: 2 | RNVC: 2
4230-500-0000232: RNCC: 3 | RNVC: 2
4230-1001: RNCC: 5 | RNVC: 9
4230-500-0000232: RNCC: 5 | RNVC: 9
4230-500-0000232: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-37-501-8686
Handle Grip

375018686
KDC2350-P0003-6: RNCC: 2 | RNVC: 1
60702520: RNCC: 3 | RNVC: 2
60702520: RNCC: 5 | RNVC: 2

13 May 1991

5340-37-508-5590
Rod Retainer Clip

375085590
Q65034164: RNCC: 3 | RNVC: 2

4 Feb 2002

5340-37-508-6351
Mounting Bracket

375086351
344010005: RNCC: 3 | RNVC: 2
3A440C10005: RNCC: 3 | RNVC: 2

26 Feb 2002

5340-37-524-0865
Bottom Panel

375240865
91039465: RNCC: 3 | RNVC: 2
91039465: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-516-8260
Dust And Moisture Seal Protective Cover

375168260
20030723: RNCC: 3 | RNVC: 2
20030723: RNCC: 5 | RNVC: 2

18 Mar 2009

5340-37-524-9268
Rod End Connector

375249268
P310C1024000: RNCC: 3 | RNVC: 2

28 Nov 2012

5340-37-509-3937
Mounting Plate

375093937
80264403: RNCC: 3 | RNVC: 2
80264403: RNCC: 5 | RNVC: 9

29 Nov 2002

5340-37-524-8058
Mounting Plate

375248058
60821300: RNCC: 3 | RNVC: 2
60821300: RNCC: 5 | RNVC: 2

31 Oct 2012

5340-37-523-4439
Access Cover

375234439
A60079862: RNCC: 3 | RNVC: 2
A60079862: RNCC: 5 | RNVC: 2

13 Jun 2012

5340-37-519-1644
Turnbuckle

375191644
81362553: RNCC: 3 | RNVC: 2
81362553: RNCC: 5 | RNVC: 2

21 Jan 2010

5340-37-510-5890
Loop Clamp

375105890
60527001: RNCC: 3 | RNVC: 1
60227061: RNCC: 3 | RNVC: 2

9 Apr 2004

5340-37-512-0088
Multiple Angle Bracket

375120088
20170065: RNCC: 3 | RNVC: 2
20170065: RNCC: 5 | RNVC: 2

27 May 2005

5340-37-506-0774
Holder Breech Block

375060774
KDS 1025-1149: RNCC: 2 | RNVC: 1
20026402: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-37-114-0972
Radiator Clamp

371140972
5340-97-114-0972: RNCC: 2 | RNVC: 2
992826000: RNCC: 3 | RNVC: 2
KDS 2320-1005: RNCC: 4 | RNVC: 1

23 Nov 1987

5340-37-514-0242
Mounting Bracket

375140242
KDS 1005-3001: RNCC: 2 | RNVC: 1
Q55602029: RNCC: 3 | RNVC: 2
Q55602029: RNCC: 5 | RNVC: 2

5 Sep 2007

5340-37-514-3767
Damper

375143767
10301.9204.005: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-37-524-3042
Mounting Bracket

375243042
KDS 5880-4001: RNCC: 2 | RNVC: 1
A40001427: RNCC: 3 | RNVC: 2
A40001427: RNCC: 5 | RNVC: 2

28 Aug 2012

5340-37-505-4303
Elastic Strap

375054303
KDS 2320-1004: RNCC: 2 | RNVC: 1
61228487: RNCC: 5 | RNVC: 9
61228487: RNCC: 5 | RNVC: 9

2 Dec 1998

5340-37-522-6886
Mounting Bracket

375226886
KDC 1680-T4005: RNCC: 2 | RNVC: 1
A81025302: RNCC: 3 | RNVC: 2
A81025302-03: RNCC: 3 | RNVC: 2
A81025302-03: RNCC: 5 | RNVC: 2

14 Feb 2012

5340-37-524-0242
Mounting Bracket

375240242
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81009142-01: RNCC: 3 | RNVC: 2
A81009142-01: RNCC: 5 | RNVC: 2
A81009142: RNCC: D | RNVC: 9

7 Aug 2012

5340-37-504-6205
Cushioning Pad

375046205
60044404: RNCC: 3 | RNVC: 2
60044404: RNCC: 5 | RNVC: 2

26 Apr 1997

5340-37-519-6138
Mounting Bracket

375196138
A20009054: RNCC: 3 | RNVC: 2
A20009054: RNCC: 5 | RNVC: 2

15 Jun 2010

5340-37-522-6593
Block

375226593
KDC 2995-T4001: RNCC: 2 | RNVC: 1
A8004008901: RNCC: 3 | RNVC: 2
A80040089: RNCC: 3 | RNVC: 2
A8004008901: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-37-519-2913
Mounting Plate

375192913
81364429: RNCC: 3 | RNVC: 2
81364429: RNCC: 5 | RNVC: 2

8 Mar 2010

5340-37-522-7935
Access Cover

375227935
KDC 2010-T4001: RNCC: 2 | RNVC: 1
DSN1140-4604: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-37-512-0248
Mounting Bracket

375120248
50125296: RNCC: 3 | RNVC: 2
50125296: RNCC: 5 | RNVC: 2

31 May 2005

5340-37-526-0255
Spacing Threaded Standoff

375260255
KDS 2350-4008: RNCC: 2 | RNVC: 2
A60075457: RNCC: 5 | RNVC: 2
A60075457: RNCC: D | RNVC: 9

15 Apr 2013

5340-37-521-7006
Mounting Bracket

375217006
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81057321: RNCC: 3 | RNVC: 2
A81057321-03: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-37-507-0551
Cylinder Head Cover

375070551
60806041: RNCC: 5 | RNVC: 9
65.03401-0051: RNCC: 5 | RNVC: 9

10 Apr 2000

5340-37-502-4985
Access Cover

375024985
60073481: RNCC: 3 | RNVC: 2

6 Oct 1993

5340-37-524-2969
Front Panel

375242969
91038554: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-37-524-5182
Mounting Plate

375245182
60831289: RNCC: 3 | RNVC: 2

24 Sep 2012

5340-37-500-4226
Angle Bracket

375004226
1055-1018-1: RNCC: 5 | RNVC: 9
20016884: RNCC: 5 | RNVC: 9

16 May 1989

5340-37-500-3015
Angle Bracket

375003015
KDC2350-P0001-16: RNCC: 2 | RNVC: 1
60644133-2: RNCC: 5 | RNVC: 9

20 Jun 1989

5340-37-521-8226
Mounting Bracket

375218226
50133783: RNCC: 3 | RNVC: 2
50133783: RNCC: 5 | RNVC: 2

8 Sep 2011

5340-37-524-9342
Mounting Plate

375249342
A60055510: RNCC: 3 | RNVC: 2
A60055510: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-37-514-3934
Detent Plunger

375143934
10301.5316.001: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-37-504-6144
Cushioning Pad

375046144
60044379: RNCC: 3 | RNVC: 2
60044379: RNCC: 5 | RNVC: 2

24 Apr 1997

5340-37-511-5085
Front Plate

375115085
20109754: RNCC: 3 | RNVC: 2
20109754: RNCC: 5 | RNVC: 2

18 Jan 2005

5340-37-511-6260
Double Angle Bracket

375116260
85Y9134-021: RNCC: 3 | RNVC: 2
85Y9134-021: RNCC: 5 | RNVC: 2

5 Mar 2005

5340-37-518-6856
Access Cover

375186856
61523191: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61523191: RNCC: 5 | RNVC: 2

28 Sep 2009

5340-37-518-0498
Mounting Bracket

375180498
60826128: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826128: RNCC: 5 | RNVC: 2

6 Jul 2009

5340-37-526-6412
Access Hole Frame

375266412
81107101: RNCC: 3 | RNVC: 2
81107101: RNCC: 5 | RNVC: 2

12 Aug 2013

5340-37-519-5449
Access Cover

375195449
A20010185: RNCC: 3 | RNVC: 2
A20010185: RNCC: 5 | RNVC: 2

31 May 2010

5340-37-502-9742
Section Block Clamp

375029742
60311436: RNCC: 3 | RNVC: 2

21 Oct 1994

5340-37-511-4613
Moun Plate Assembly

375114613
Q55111578: RNCC: 3 | RNVC: 2
Q55111578: RNCC: 5 | RNVC: 2

3 Jan 2005

5340-37-516-4537

5340-37-512-9261
Push Rod

375129261
Q25027578: RNCC: 3 | RNVC: 2
Q25027578: RNCC: 5 | RNVC: 2

16 Mar 2006

5340-37-519-2818
Access Door Hinge

375192818
81365298: RNCC: 3 | RNVC: 2
81365298: RNCC: 5 | RNVC: 2

5 Mar 2010

5340-37-505-5426
Support Timing Gear

375055426
Q55016156: RNCC: 3 | RNVC: 2

22 Feb 1999

5340-37-506-0732
Mounting Bracket

375060732
80064695: RNCC: 3 | RNVC: 2
80064695: RNCC: 5 | RNVC: 2

4 Aug 1999

5340-37-519-3790
Detent Plunger

375193790
A20007316: RNCC: 3 | RNVC: 2
A20007316: RNCC: 5 | RNVC: 2

24 Mar 2010

5340-37-518-9297
Mounting Plate

375189297
60819429: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60819429: RNCC: 5 | RNVC: 2

1 Dec 2009

5340-37-520-0420
Mounting Plate

375200420
KDS-1015-4003: RNCC: 2 | RNVC: 2
A20013173: RNCC: 3 | RNVC: 2
A20013173: RNCC: 5 | RNVC: 2

27 Sep 2010

5340-37-521-0641
Cowling Lock

375210641
A81016308-01: RNCC: 3 | RNVC: 2
A81016308-01: RNCC: 5 | RNVC: 2
A81016308: RNCC: D | RNVC: 9

31 Mar 2011

5340-37-526-1520
Mounting Bracket

375261520
91027370-01: RNCC: 3 | RNVC: 2
91027370-01: RNCC: 5 | RNVC: 2
91027370: RNCC: D | RNVC: 9

30 May 2013

5340-37-522-0006
Support Hook

375220006
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81004365: RNCC: 3 | RNVC: 2
A81004365-01: RNCC: 3 | RNVC: 2
A81004365-01: RNCC: 5 | RNVC: 2

1 Nov 2011

5340-37-522-4160
Mounting Bracket

375224160
KDC 1680-T4005: RNCC: 2 | RNVC: 1
A81025566: RNCC: 3 | RNVC: 2
A81025566-01: RNCC: 3 | RNVC: 2
A81025566-01: RNCC: 5 | RNVC: 2
A81025566-01: RNCC: 5 | RNVC: 2

28 Dec 2011

5340-37-511-5395
Angle Bracket

375115395
85PF9271-201: RNCC: 3 | RNVC: 1
85PF9271-202: RNCC: 3 | RNVC: 2
85PF9271-202: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-37-506-1183
Resilient Mount Plate

375061183
KDS 1025-1150: RNCC: 2 | RNVC: 1
20026726: RNCC: 3 | RNVC: 2

9 Aug 1999

5340-37-521-0550
Threaded Rod End

375210550
92003500: RNCC: 3 | RNVC: 2
92003500: RNCC: 5 | RNVC: 2

30 Mar 2011

5340-37-501-5913
Plate Assembly

375015913
60722121: RNCC: 3 | RNVC: 2
60722121: RNCC: 5 | RNVC: 2

1 May 1990

5340-37-522-4506
Mounting Bracket

375224506
50139163: RNCC: 3 | RNVC: 2
50139163: RNCC: 5 | RNVC: 2

6 Jan 2012

5340-37-520-3701
Dust And Moisture Seal Protective Cap

375203701
A40005547: RNCC: 3 | RNVC: 2
A40005547: RNCC: 5 | RNVC: 2

28 Nov 2010

5340-37-521-0542
Mounting Bracket

375210542
92003386: RNCC: 3 | RNVC: 2
92003386: RNCC: 5 | RNVC: 2

30 Mar 2011

5340-37-527-1445
Clamp Bolt Assembly

375271445
A50056513: RNCC: 3 | RNVC: 2
A50056513: RNCC: 5 | RNVC: 2

15 Oct 2013

5340-37-504-6190
Cushioning Pad

375046190
60044389: RNCC: 3 | RNVC: 2
60044389: RNCC: 5 | RNVC: 2

26 Apr 1997

5340-37-525-7752
Manual Control Handle

375257752
N51007455: RNCC: 3 | RNVC: 2
N51007455: RNCC: 5 | RNVC: 2

14 Mar 2013

5340-37-516-7384
Leakproof Seal Plug

375167384
61548981-2: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61548981-2: RNCC: 5 | RNVC: 2

4 Mar 2009

5340-37-510-9915
Bail Handle

375109915
Q55606972: RNCC: 3 | RNVC: 1
Q55606972-2: RNCC: 3 | RNVC: 2

24 Jul 2004

5340-37-510-4722
Angle Bracket

375104722
Q65062152: RNCC: 3 | RNVC: 1
Q65062152-2: RNCC: 3 | RNVC: 2

8 Mar 2004

5340-37-516-3915
Fixed Bracket

375163915
91026941: RNCC: 3 | RNVC: 2
91026941: RNCC: 5 | RNVC: 2

18 Nov 2008

5340-37-523-5995
Bumper

375235995
EPAN-100-80-3: RNCC: 3 | RNVC: 2

3 Jul 2012

5340-37-508-7512
Spring Tension Clip

375087512
Q65039028: RNCC: 3 | RNVC: 2
Q65039028: RNCC: 3 | RNVC: 2

1 Apr 2002

5340-37-520-5702
Access Door Hinge

375205702
A60025282: RNCC: 3 | RNVC: 2
A60025282: RNCC: 5 | RNVC: 2

16 Dec 2010

5340-37-516-0439
Housing Assembly

375160439
91028321: RNCC: 3 | RNVC: 2
91028321: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-512-2466
Suppor Rubber Cover

375122466
Q65011163: RNCC: 3 | RNVC: 2
Q65011163: RNCC: 5 | RNVC: 2

11 Jul 2005

5340-37-519-1704
Mounting Bracket

375191704
81361802: RNCC: 3 | RNVC: 2
81361802: RNCC: 5 | RNVC: 2

22 Jan 2010

5340-37-525-2095
Mounting Bracket

375252095
91046601-E8-3: RNCC: 3 | RNVC: 2
91046601-E8-3: RNCC: 5 | RNVC: 2
91046601-E8: RNCC: D | RNVC: 9

10 Jan 2013

5340-37-518-5289
Vent Plug

375185289
60444672-2: RNCC: 3 | RNVC: 2
60444672: RNCC: 5 | RNVC: 1
60444672-2: RNCC: 5 | RNVC: 2

10 Aug 2009

5340-37-527-1950
Mounting Plate

375271950
A50059119: RNCC: 3 | RNVC: 2
A50059119: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-37-503-0179
Angle Bracket

375030179
KDS 1290-1082: RNCC: 2 | RNVC: 1
40007046: RNCC: 5 | RNVC: 9

7 Nov 1994

5340-37-522-4502
Mounting Bracket

375224502
50139098: RNCC: 3 | RNVC: 2
50139098: RNCC: 5 | RNVC: 2

6 Jan 2012

5340-37-511-2228
Webbing Strap

375112228
Q65079912: RNCC: 3 | RNVC: 2
Q65079912: RNCC: 5 | RNVC: 2

16 Sep 2004

5340-37-519-9651
Strap End Clip

375199651
85B1118-093: RNCC: 3 | RNVC: 2
85B1118-093: RNCC: 5 | RNVC: 2

6 Sep 2010

5340-37-505-9324
Mounting Bracket

375059324
KDS 2350-1024: RNCC: 2 | RNVC: 1
60343508: RNCC: 3 | RNVC: 2

13 Jul 1999

5340-37-511-5889
Multiple Angle Bracket

375115889
85PF9380-211: RNCC: 3 | RNVC: 2
85PF9380-211: RNCC: 5 | RNVC: 2

21 Feb 2005

5340-37-504-0831
Bow Handle

375040831
KDS 5820-1287: RNCC: 2 | RNVC: 1
50085139: RNCC: 3 | RNVC: 2

8 May 1996

5340-37-517-6901
Mounting Bracket

375176901
60821777: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60821777: RNCC: 5 | RNVC: 2

25 Jun 2009

5340-37-518-0191
Mounting Bracket

375180191
82912301-01: RNCC: 3 | RNVC: 2

6 Jul 2009

5340-37-518-4775
Mounting Bracket

375184775
WF533415-01: RNCC: 3 | RNVC: 2

4 Aug 2009

5340-37-522-5340
Mounting Bracket

375225340
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85D2366-603: RNCC: 3 | RNVC: 2
85D2366-603: RNCC: 5 | RNVC: 2

26 Jan 2012

5340-37-506-1017
Cover

375061017
KDS 1025-1150: RNCC: 2 | RNVC: 1
20026671: RNCC: 3 | RNVC: 2

7 Aug 1999

5340-37-503-1526
Access Cover

375031526
KDS 3805-1024: RNCC: 2 | RNVC: 1
60312415: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-37-521-6641
Mounting Bracket

375216641
KDS1510-4002: RNCC: 2 | RNVC: 1
85S5530-321: RNCC: 3 | RNVC: 2
85S5530-321: RNCC: 5 | RNVC: 2

27 Jul 2011

5340-37-501-2853
Mounting Bracket

375012853
KDC2350-P0003-6: RNCC: 2 | RNVC: 1
60730844: RNCC: 3 | RNVC: 2
60730844: RNCC: 5 | RNVC: 2

2 May 1989

5340-37-516-8939
Access Cover

375168939
80096398: RNCC: 3 | RNVC: 2
80096398: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-523-5034
Guide Welded And Pr

375235034
A60079640: RNCC: 3 | RNVC: 2
A60079640: RNCC: 5 | RNVC: 2

20 Jun 2012

5340-37-525-4727
Mounting Bracket

375254727
91044707: RNCC: 3 | RNVC: 2
91044707: RNCC: 5 | RNVC: 2

31 Jan 2013

5340-37-515-2390
Mounting Plate

375152390
50145270: RNCC: 3 | RNVC: 2
50145270: RNCC: 5 | RNVC: 2

15 May 2008

5340-37-518-4716
Access Door Hinge

375184716
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20013408: RNCC: 3 | RNVC: 2
A20013408: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-512-7585
Headless Grooved Rod

375127585
85J0546-001: RNCC: 3 | RNVC: 2
85J1546-001: RNCC: 3 | RNVC: 2
85J0546-001: RNCC: 5 | RNVC: 2
85J1546-001: RNCC: 5 | RNVC: 2

5 Dec 2005

5340-37-005-6860
Fly Wheel Hou Ring

370056860
KDC 3805-P0001: RNCC: 2 | RNVC: 1
5340-97-005-6860: RNCC: 2 | RNVC: 2
74255904: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-521-7079
Angle Bracket

375217079
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81069301: RNCC: 3 | RNVC: 2
A81069301-01: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-37-523-0738
Mounting Bracket

375230738
KDS 5895-4032: RNCC: 2 | RNVC: 1
50140169-02: RNCC: 3 | RNVC: 2
50140169-02: RNCC: 5 | RNVC: 2
50140169: RNCC: D | RNVC: 9

20 Apr 2012

5340-37-516-8340
Retaining Strap

375168340
60817752: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60817752: RNCC: 5 | RNVC: 2

19 Mar 2009

5340-37-517-3965
Key

375173965
KDC 2040-D0001: RNCC: 2 | RNVC: 1
7940-32-01-08: RNCC: 5 | RNVC: 9
7940-32-01-08: RNCC: 5 | RNVC: 9

4 Jun 2009

5340-37-556-4720
Side Rh Cutter

375564720
63E1-3534: RNCC: 5 | RNVC: 1

30 Mar 2004

5340-37-524-0570
Right Panel Assembl

375240570
91039058: RNCC: 3 | RNVC: 2
91039058: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-37-510-6543
Inlet Pipe Plate

375106543
60576201: RNCC: 3 | RNVC: 2
60576201: RNCC: 3 | RNVC: 2

23 Apr 2004

5340-37-520-0230
Dust And Moisture Seal Protective Cover

375200230
A20006312: RNCC: 5 | RNVC: 2
A20006312: RNCC: D | RNVC: 9

25 Sep 2010

5340-37-505-6303
Cushioning Pad

375056303
KDS 2350-1024: RNCC: 2 | RNVC: 1
60359167-7: RNCC: 3 | RNVC: 2
60359167: RNCC: 3 | RNVC: 2

13 Apr 1999

5340-37-515-0342
Mounting Plate

375150342
KDS 1240-4009: RNCC: 2 | RNVC: 1
60385064-4: RNCC: 3 | RNVC: 2
60385064-4: RNCC: 5 | RNVC: 2

15 Apr 2008

5340-37-518-7300
Lock Bolt

375187300
60820153: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60820153: RNCC: 5 | RNVC: 2

15 Oct 2009

5340-37-516-0808
Masking Plate

375160808
91025538: RNCC: 3 | RNVC: 2
91025538: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-525-2235
Mounting Plate

375252235
91045226: RNCC: 3 | RNVC: 2
91045226: RNCC: 5 | RNVC: 2

11 Jan 2013

5340-37-518-4265
Camfollower Pin

375184265
Q25022157: RNCC: 3 | RNVC: 2
Q25022157: RNCC: 5 | RNVC: 2
CF8: RNCC: 5 | RNVC: 2

30 Jul 2009

5340-37-134-2365

5340-37-160-0920

5340-37-180-5822

5340-37-512-1810
Dust And Moisture Seal Protective Cap

375121810
Q65034277: RNCC: 3 | RNVC: 2
Q65034277: RNCC: 5 | RNVC: 2

28 Jun 2005

5340-37-511-0714
Cushioning Pad

375110714
60444815: RNCC: 3 | RNVC: 2
60444815-1: RNCC: 5 | RNVC: 2

13 Aug 2004

5340-37-518-5789
Support Hook

375185789
60824425: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60824425: RNCC: 5 | RNVC: 2

21 Aug 2009

5340-37-512-1667
Access Cover

375121667
85B5512-113: RNCC: 3 | RNVC: 2
85B5512-113: RNCC: 5 | RNVC: 2

24 Jun 2005

5340-37-513-1022
Mounting Plate

375131022
80017543: RNCC: 3 | RNVC: 2
80017543: RNCC: 5 | RNVC: 2

11 Jul 2006

5340-37-518-7238
Mounting Plate

375187238
Q55405424: RNCC: 3 | RNVC: 2
Q55405424: RNCC: 5 | RNVC: 2
61014453: RNCC: 5 | RNVC: 2

14 Oct 2009

5340-37-524-1170
Mounting Bracket

375241170
D60838002: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-37-526-1392
Fan Cover

375261392
A50051986: RNCC: 3 | RNVC: 2
A50051986: RNCC: 5 | RNVC: 2

30 May 2013

5340-37-510-5836
Loop Clamp

375105836
60575299: RNCC: 3 | RNVC: 2
60575299: RNCC: 3 | RNVC: 2
60575299: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-37-510-6248
Ecc Back Plate

375106248
20120344: RNCC: 3 | RNVC: 1
20120344: RNCC: 3 | RNVC: 2
20120344: RNCC: 5 | RNVC: 2

15 Apr 2004

5340-37-512-9041
Exha Cover Weldment

375129041
Q25028003: RNCC: 3 | RNVC: 2
Q25028003: RNCC: 5 | RNVC: 2

9 Mar 2006

5340-37-520-7872
Mounting Bracket

375207872
A81045121: RNCC: 3 | RNVC: 2
A8104512101: RNCC: 3 | RNVC: 2
A8104512101: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-37-556-3523

5340-37-511-6116
Double Angle Bracket

375116116
85PF9580-231: RNCC: 3 | RNVC: 2
85PF9580-231: RNCC: 5 | RNVC: 2

3 Mar 2005

5340-37-521-1199
Aircraft Latch Hook

375211199
A81018130-02: RNCC: 3 | RNVC: 2
A81018130-02: RNCC: 5 | RNVC: 2
A81018130: RNCC: D | RNVC: 9

17 Apr 2011

5340-37-515-5863
Cooling Jacket

375155863
PLATE 90101-114-114: RNCC: 3 | RNVC: 2

28 Jul 2008

5340-37-515-2809
Loop Clamp

375152809
JOC-4N: RNCC: 3 | RNVC: 2
JOC-4N: RNCC: 5 | RNVC: 2

21 May 2008

5340-37-516-3142
Mounting Bracket

375163142
83031450: RNCC: 3 | RNVC: 2
83031450: RNCC: 5 | RNVC: 2

12 Nov 2008

5340-37-516-8771
Bow Handle

375168771
80095653: RNCC: 3 | RNVC: 2
80095653: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-525-3357
Angle Bracket

375253357
A50040614: RNCC: 3 | RNVC: 2
A50040614: RNCC: 5 | RNVC: 2

18 Jan 2013

5340-37-512-9517
Mounting Bracket

375129517
Q25026392: RNCC: 3 | RNVC: 2
Q25026392: RNCC: 5 | RNVC: 2

24 Mar 2006

5340-37-503-1215
Access Cover

375031215
60311280: RNCC: 3 | RNVC: 2

22 Nov 1994

5340-37-522-9153
Angle Bracket

375229153
KDS 5895-4032: RNCC: 2 | RNVC: 1
50141336: RNCC: 3 | RNVC: 2
50141336: RNCC: 5 | RNVC: 2

1 Apr 2012

5340-37-516-8433
Mounting Bracket

375168433
60817871: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60817871: RNCC: 5 | RNVC: 2

24 Mar 2009

5340-37-516-8125
Mounting Bracket

375168125
60817403: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60817403: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-37-524-2040
Mounting Plate

375242040
KDS 5855-4012: RNCC: 2 | RNVC: 1
A40007615: RNCC: 3 | RNVC: 2
A40007615: RNCC: 5 | RNVC: 2

20 Aug 2012

5340-37-556-4302
Plate L.H

375564302
5340NSN020532: RNCC: 5 | RNVC: 1

30 Mar 2004

5340-37-514-7044
Pipe Hanger

375147044
1.15.9999.145.006: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-37-501-1834
Block

375011834
KDC2350-P0003-6: RNCC: 2 | RNVC: 1
60703605: RNCC: 3 | RNVC: 2
60703605: RNCC: 5 | RNVC: 2

7 Dec 1988

5340-37-523-5677
Cushioning Pad

375235677
61513620: RNCC: 5 | RNVC: 2

29 Jun 2012

5340-37-500-1395
Extension Drawer Slide Section

375001395
70014067: RNCC: 5 | RNVC: 9
790-73060: RNCC: 5 | RNVC: 9
ROK MIL SPEC 6660-1006: RNCC: 5 | RNVC: 9
6660-1006: RNCC: 5 | RNVC: 9
70014067: RNCC: 5 | RNVC: 9
790-73060: RNCC: 5 | RNVC: 9

30 Aug 1990

5340-37-511-7937
Access Door Hinge

375117937
85S2332-015: RNCC: 3 | RNVC: 2
85S2332-015: RNCC: 5 | RNVC: 2

7 Apr 2005

5340-37-521-9998
Mortise Latch

375219998
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81002342-01: RNCC: 3 | RNVC: 2
A81002342-01: RNCC: 5 | RNVC: 2
A81002342: RNCC: D | RNVC: 9

1 Nov 2011

5340-37-521-9223
Mounting Bracket

375219223
KDS 2350-4003: RNCC: 2 | RNVC: 1
61527134: RNCC: 3 | RNVC: 2
61527134: RNCC: 5 | RNVC: 2

23 Sep 2011

5340-37-111-0600
Hook Clamp

371110600
5340-97-111-0600: RNCC: 2 | RNVC: 2
024924342: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-512-1655
Access Cover

375121655
85B5511-109: RNCC: 3 | RNVC: 2
85B5511-109: RNCC: 5 | RNVC: 2

24 Jun 2005

5340-37-004-1712
Panel

370041712
KDS 4230-1001: RNCC: 2 | RNVC: 1
5340-97-004-1712: RNCC: 2 | RNVC: 2
4230-500-0000189: RNCC: 3 | RNVC: 2
4230-500-0000189: RNCC: 5 | RNVC: 9
4230-500-0000189: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-37-505-5933
Mending Plate

375055933
KDS 2350-1024: RNCC: 2 | RNVC: 1
60356841: RNCC: 3 | RNVC: 2

30 Mar 1999

5340-37-518-6497
Angle Bracket

375186497
2330-118-0000093: RNCC: 3 | RNVC: 2

9 Sep 2009

5340-37-513-9815
Mounting Bracket

375139815
Q55029043: RNCC: 3 | RNVC: 2
Q55029043: RNCC: 5 | RNVC: 2

28 Aug 2007

5340-37-519-5834
Block Clamp

375195834
A20010256: RNCC: 3 | RNVC: 2
A20010256: RNCC: 5 | RNVC: 2

8 Jun 2010

5340-37-522-8982
Mounting Bracket

375228982
KDS 5895-4032: RNCC: 2 | RNVC: 1
50141172: RNCC: 3 | RNVC: 2
50141172: RNCC: 5 | RNVC: 2

29 Mar 2012

5340-37-500-3633
Webbing Strap

375003633
60020885: RNCC: 3 | RNVC: 2
60020885: RNCC: 3 | RNVC: 2
KDS 2320-1005: RNCC: 4 | RNVC: 1

24 May 1989

5340-37-518-1387
Mounting Plate

375181387
60824358: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60824358: RNCC: 5 | RNVC: 2

21 Jul 2009

5340-37-503-4603
Bracket Assembly

375034603
60625122: RNCC: 5 | RNVC: 9

31 Jul 1995

5340-37-523-9176
Mounting Plate

375239176
60823503: RNCC: 3 | RNVC: 2
60823503: RNCC: 5 | RNVC: 2

1 Aug 2012

5340-37-507-0082
Body Assembly

375070082
95001906: RNCC: 3 | RNVC: 2

20 Mar 2000

5340-37-519-1293
Mounting Plate

375191293
82761201-01: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-524-2646
Mounting Bracket

375242646
KDS584530111: RNCC: 2 | RNVC: 1
A50038886: RNCC: 3 | RNVC: 2
A50038886: RNCC: 5 | RNVC: 2

24 Aug 2012

5340-37-511-3967
Kick Door Plate

375113967
60530047-C: RNCC: 3 | RNVC: 2
60530047-C: RNCC: 5 | RNVC: 2

4 Dec 2004

5340-37-507-0071
Brush Assemb Plate

375070071
KDS 2350-1024: RNCC: 2 | RNVC: 1
60344471: RNCC: 3 | RNVC: 2

20 Mar 2000

5340-37-524-3049
Mounting Bracket

375243049
KDS 5880-4001: RNCC: 2 | RNVC: 1
A40001435: RNCC: 3 | RNVC: 2
A40001435: RNCC: 5 | RNVC: 2

28 Aug 2012

5340-37-511-9260
Mounting Plate

375119260
85PF5869-203: RNCC: 3 | RNVC: 2
85PF5869-203: RNCC: 5 | RNVC: 2

6 May 2005

5340-37-520-1162
Mounting Plate

375201162
A20006180: RNCC: 3 | RNVC: 2
A20006180: RNCC: 5 | RNVC: 2

11 Oct 2010

5340-37-519-7969
Angle Bracket

375197969
Q55606924: RNCC: 5 | RNVC: 2
Q55606924: RNCC: D | RNVC: 9

4 Aug 2010

5340-37-515-3628
Mounting Plate

375153628
91025705: RNCC: 3 | RNVC: 2
91025705: RNCC: 5 | RNVC: 2

11 Jun 2008

5340-37-512-3144
Mounting Plate

375123144
85D7140-073: RNCC: 3 | RNVC: 2
85D7140-074: RNCC: 5 | RNVC: 2

25 Jul 2005

5340-37-005-1201
Cylinder Ring

370051201
KDC 3805-P0007: RNCC: 2 | RNVC: 1
5340-97-005-1201: RNCC: 2 | RNVC: 2
70925996: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-511-5390
Angle Bracket

375115390
85PF9240-221: RNCC: 3 | RNVC: 2
85PF9240-221: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-37-518-7843
Mounting Plate

375187843
61525840: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61525840: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-509-4268
Block

375094268
60635355: RNCC: 3 | RNVC: 2
60635355: RNCC: 3 | RNVC: 2
5330-37-A12-4532: RNCC: 5 | RNVC: 2

17 Dec 2002

5340-37-114-3886
Plug Button Door

371143886
5340-97-114-3886: RNCC: 2 | RNVC: 2
60423160: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-521-9283
Mounting Bracket

375219283
KDS 2350-4003: RNCC: 2 | RNVC: 1
61508665: RNCC: 3 | RNVC: 2
61508665: RNCC: 5 | RNVC: 2

26 Sep 2011

5340-37-525-5752
Mounting Bracket

375255752
KDS 6675-4001: RNCC: 2 | RNVC: 1
50167885: RNCC: 3 | RNVC: 2
50167885: RNCC: 5 | RNVC: 2

14 Feb 2013

5340-37-512-8549
Fastener

375128549
Q25022272-2: RNCC: 3 | RNVC: 2
Q25022272: RNCC: 5 | RNVC: 1
Q25022272-2: RNCC: 5 | RNVC: 2

23 Feb 2006

5340-37-516-5568
Access Cover

375165568
20030497: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030497: RNCC: 5 | RNVC: 2

23 Dec 2008

5340-37-507-0397
Battery Lug Cover

375070397
KDS 2350-1024: RNCC: 2 | RNVC: 1
60349230: RNCC: 3 | RNVC: 2

4 Apr 2000

5340-37-505-2085
Rim Clamp Assembly

375052085
50106672: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-37-555-0085
Base

375550085
60715115: RNCC: 3 | RNVC: 2
60715115: RNCC: 5 | RNVC: 2

8 Aug 2001

5340-37-510-5348
Mounting Plate

375105348
80075563: RNCC: 3 | RNVC: 1
80075563: RNCC: 5 | RNVC: 9

26 Mar 2004

5340-37-132-1022
Strap Assy C

371321022
KDC 2510-P0005: RNCC: 2 | RNVC: 1
5340-97-132-1022: RNCC: 2 | RNVC: 2
2320-1006: RNCC: 3 | RNVC: 2
5305315: RNCC: 3 | RNVC: 2
2320-1006-1: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-37-505-5019
Angle Bracket

375055019
KDS 1510-4001: RNCC: 2 | RNVC: 1
81237301: RNCC: 5 | RNVC: 9
81237301-01: RNCC: 5 | RNVC: 9

4 Feb 1999

5340-37-512-3439
Angle Bracket

375123439
85D1260-071: RNCC: 3 | RNVC: 2
85D1260-071: RNCC: 5 | RNVC: 2

28 Jul 2005

5340-37-518-6870
Access Cover

375186870
61523265: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61523265: RNCC: 5 | RNVC: 2

28 Sep 2009

5340-37-521-9692
Section Block Clamp

375219692
KDS 2350-4003: RNCC: 2 | RNVC: 1
61532594: RNCC: 3 | RNVC: 2
61532594: RNCC: 5 | RNVC: 2

18 Oct 2011

5340-37-522-7939
Access Cover

375227939
KDC 2010-T4001: RNCC: 2 | RNVC: 1
DSN1140-4609: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-37-514-9550
Access Cover

375149550
Q55108907: RNCC: 3 | RNVC: 2
Q55108907: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-37-501-2028
Angle Bracket

375012028
KDC2350-P0003-6: RNCC: 2 | RNVC: 1
60704456: RNCC: 3 | RNVC: 2
60704456: RNCC: 5 | RNVC: 2

22 Dec 1988

5340-37-511-1772
Upper Heat Cutout P

375111772
Q25019488: RNCC: 3 | RNVC: 2
Q25019488: RNCC: 5 | RNVC: 2

7 Sep 2004

5340-37-514-5876
Stand Base

375145876
50141978: RNCC: 3 | RNVC: 2
50141978: RNCC: 5 | RNVC: 2

9 Jan 2008

5340-37-506-9654
Access Cover

375069654
95002586: RNCC: 3 | RNVC: 2

25 Feb 2000

5340-37-160-1060
Spec Protective Cap

371601060
KDC 2510-P0005: RNCC: 2 | RNVC: 1
2320-1006: RNCC: 3 | RNVC: 2
5330-97-160-1060: RNCC: 5 | RNVC: 9
65, 96001-0022: RNCC: 5 | RNVC: 9

18 Oct 1989

5340-37-130-2499
Ring-O

371302499
5340-97-130-2499: RNCC: 2 | RNVC: 2
9954102101: RNCC: 3 | RNVC: 2
99541 02101: RNCC: 5 | RNVC: 9
99541 02101: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-37-511-7150
Angle Bracket

375117150
85P9111-003: RNCC: 3 | RNVC: 2
85P9111-003: RNCC: 5 | RNVC: 2

23 Mar 2005

5340-37-522-2743
Manual Control Lever

375222743
KDS 2350-4003: RNCC: 2 | RNVC: 1
61507450: RNCC: 3 | RNVC: 2
61507450: RNCC: 5 | RNVC: 2

7 Dec 2011

5340-37-505-7428
Angle Bracket

375057428
KDS 1510-4001: RNCC: 2 | RNVC: 1
81292601: RNCC: 3 | RNVC: 2
81292601-01: RNCC: 5 | RNVC: 2

24 May 1999

5340-37-521-2697
Mounting Bracket

375212697
KDS 2350-4003: RNCC: 2 | RNVC: 1
61509065: RNCC: 3 | RNVC: 2
61509065: RNCC: 5 | RNVC: 2

6 May 2011

5340-37-517-8783
Mounting Bracket

375178783
WF214405-01: RNCC: 3 | RNVC: 2

30 Jun 2009

5340-37-511-9225
Dust And Moisture Seal Protective Cap

375119225
85PF5902-203: RNCC: 3 | RNVC: 2
85PF5902-203: RNCC: 5 | RNVC: 2

6 May 2005

5340-37-502-6044
Mortise Latch

375026044
60074361: RNCC: 3 | RNVC: 2

4 Mar 1994

5340-37-514-7272
Mounting Plate

375147272
50135769: RNCC: 3 | RNVC: 2
50135769: RNCC: 5 | RNVC: 2

26 Feb 2008

5340-37-526-6787
Mounting Bracket

375266787
40019086: RNCC: 3 | RNVC: 2
40019086: RNCC: 5 | RNVC: 2

20 Aug 2013

5340-37-507-3356
Threaded Rod End

375073356
KDS 3950-3002: RNCC: 2 | RNVC: 1
95005799: RNCC: 3 | RNVC: 2
95005799: RNCC: 5 | RNVC: 2

5 Sep 2000

5340-37-527-2492
Mounting Bracket

375272492
A50044662: RNCC: 3 | RNVC: 2
A50044662: RNCC: 5 | RNVC: 2

22 Oct 2013

5340-37-510-9726
Dust And Moisture Seal Protective Plug

375109726
60535302: RNCC: 3 | RNVC: 2
60535302: RNCC: 3 | RNVC: 2

23 Jul 2004

5340-37-522-3687
Swivel Caster

375223687
K-MH0606PCI-S: RNCC: 3 | RNVC: 2
K-MH0606PCI-S: RNCC: 5 | RNVC: 2

21 Dec 2011

5340-37-508-5728
Helical Compression Spring Seat

375085728
Q65033544: RNCC: 3 | RNVC: 2

6 Feb 2002

5340-37-523-6109
Angle Bracket

375236109
61507646: RNCC: 5 | RNVC: 2

5 Jul 2012

5340-37-520-6428
Mounting Bracket

375206428
A20017878: RNCC: 3 | RNVC: 2
A20017878: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-520-7832
Access Cover

375207832
A81041102: RNCC: 3 | RNVC: 2
A8104110201: RNCC: 3 | RNVC: 2
A8104110201: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-37-516-3188
Access Cover

375163188
83030916: RNCC: 3 | RNVC: 2
83030916: RNCC: 5 | RNVC: 2

12 Nov 2008

5340-37-507-6847
Mounting Plate

375076847
60331113: RNCC: 3 | RNVC: 2
60331113: RNCC: 5 | RNVC: 2

16 Feb 2001

5340-37-512-9198
Support Block

375129198
Q25022184: RNCC: 3 | RNVC: 2
Q25022184: RNCC: 5 | RNVC: 2

14 Mar 2006

5340-37-200-6241

5340-37-500-4760

5340-37-515-5870
Manual Control Lever

375155870
A14-143628-7: RNCC: 3 | RNVC: 2

28 Jul 2008

5340-37-518-8750
Access Cover

375188750
599-41345: RNCC: 3 | RNVC: 2
599-41345-00: RNCC: 5 | RNVC: 2

19 Nov 2009

5340-37-522-0104
Mounting Plate

375220104
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81035324-02: RNCC: 3 | RNVC: 2
A81035324-02: RNCC: 5 | RNVC: 2
A81035324: RNCC: D | RNVC: 9

1 Nov 2011

5340-37-521-9513
Mechanical Stop

375219513
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81506433-01: RNCC: 3 | RNVC: 2
A81506433-01: RNCC: 5 | RNVC: 2
A81506433: RNCC: D | RNVC: 9

10 Oct 2011

5340-37-504-1009
Loop Clamp

375041009
50085243: RNCC: 3 | RNVC: 2
50085243-2: RNCC: 3 | RNVC: 2
DA-4N: RNCC: 3 | RNVC: 2
DA-4N: RNCC: 5 | RNVC: 2
DA-4N: RNCC: 5 | RNVC: 2

11 May 1996

5340-37-522-0098
Angle Bracket

375220098
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81035141: RNCC: 3 | RNVC: 2
A81035141-01: RNCC: 3 | RNVC: 2
A81035141-01: RNCC: 5 | RNVC: 2

1 Nov 2011

5340-37-505-5224
Angle Bracket

375055224
KDS 1425-1001: RNCC: 2 | RNVC: 1
60801814: RNCC: 5 | RNVC: 9

12 Feb 1999

5340-37-505-5960
Loop Clamp

375055960
KDS 2350-1024: RNCC: 2 | RNVC: 1
60350961: RNCC: 3 | RNVC: 2

31 Mar 1999

5340-37-502-9219
Support Assembly

375029219
60308924: RNCC: 3 | RNVC: 2

30 Jul 2001

5340-37-510-1038
Dust And Moisture Seal Protective Cover

375101038
85J0039-001: RNCC: 5 | RNVC: 2
85J1039-001: RNCC: 5 | RNVC: 2

23 Sep 2003

5340-37-503-6071
Bracket Assembly

375036071
60311461: RNCC: 3 | RNVC: 2

17 Nov 1995

5340-37-527-2222
Mounting Bracket

375272222
A50058788: RNCC: 3 | RNVC: 2
A50058788: RNCC: 5 | RNVC: 2

18 Oct 2013

5340-37-527-1926
Mounting Plate

375271926
A50059135: RNCC: 3 | RNVC: 2
A50059135: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-37-516-4456
Under Part Panel

375164456
91028645: RNCC: 3 | RNVC: 2
91028645: RNCC: 5 | RNVC: 2

23 Nov 2008

5340-37-515-9626
Bow Handle

375159626
RD2180N: RNCC: 3 | RNVC: 2

20 Oct 2008

5340-37-526-1886
Mounting Plate

375261886
91027530: RNCC: 3 | RNVC: 2
91027530: RNCC: 5 | RNVC: 2

7 Jun 2013

5340-37-525-0000
Access Cover

375250000
61527532: RNCC: 3 | RNVC: 2
61527532: RNCC: 5 | RNVC: 2

6 Dec 2012

5340-37-526-1199
Block Clamp

375261199
91027487-02: RNCC: 3 | RNVC: 2
91027487-02: RNCC: 5 | RNVC: 2
91027487: RNCC: D | RNVC: 9

27 May 2013

5340-37-520-4156
Angle Bracket

375204156
85T2307-039: RNCC: 3 | RNVC: 2
85T2307-039: RNCC: 5 | RNVC: 2

6 Dec 2010

5340-37-524-9756
Locking Stay

375249756
STYT(L): RNCC: 3 | RNVC: 2

4 Dec 2012

5340-37-555-0062

5340-37-521-6656
Angle Bracket

375216656
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81026309: RNCC: 3 | RNVC: 2
A81026309-01: RNCC: 5 | RNVC: 2

28 Jul 2011

5340-37-511-7562
Angle Bracket

375117562
85PF9571-201: RNCC: 3 | RNVC: 2
85PF9571-201: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-37-523-6435
Access Cover

375236435
KDS 2350-4003: RNCC: 2 | RNVC: 1
61545122: RNCC: 3 | RNVC: 2
61545122: RNCC: 5 | RNVC: 2

11 Jul 2012

5340-37-522-6414
Mounting Bracket

375226414
50143567: RNCC: 3 | RNVC: 2
50143567: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-37-513-2997
Cover

375132997
219-21-183: RNCC: 3 | RNVC: 2

24 Nov 2006

5340-37-505-5625
Direction R Fix Bar

375055625
Q55016165: RNCC: 3 | RNVC: 2

3 Mar 1999

5340-37-505-6310
Cushioning Pad

375056310
KDS 2350-1024: RNCC: 2 | RNVC: 1
60359167: RNCC: 3 | RNVC: 2
60359167-14: RNCC: 3 | RNVC: 2

13 Apr 1999

5340-37-514-9164
Pad

375149164
50139658: RNCC: 3 | RNVC: 2
50139658: RNCC: 5 | RNVC: 2

26 Mar 2008

5340-37-527-0450
Access Hole Frame

375270450
A50046752: RNCC: 3 | RNVC: 2
A50046752: RNCC: 5 | RNVC: 2

8 Oct 2013

5340-37-513-3529
Mounting Plate

375133529
Q55404301: RNCC: 3 | RNVC: 2
Q55404301: RNCC: 5 | RNVC: 2

20 Dec 2006

5340-37-515-6107

5340-37-518-5787
Bow Handle

375185787
60824423: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60824423: RNCC: 5 | RNVC: 2

21 Aug 2009

5340-37-524-8963
Angle Bracket

375248963
85Y9134-671: RNCC: 3 | RNVC: 2
85Y9134-671: RNCC: 5 | RNVC: 2

26 Nov 2012

5340-37-522-5502
Mounting Bracket

375225502
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85F7150-606: RNCC: 3 | RNVC: 2
85F7150-606: RNCC: 5 | RNVC: 2

31 Jan 2012

5340-37-510-8705
Angle Bracket

375108705
Q65070029: RNCC: 3 | RNVC: 2
Q65070029: RNCC: 3 | RNVC: 2

8 Jul 2004

5340-37-512-9266
Guide

375129266
Q25027585-1: RNCC: 3 | RNVC: 2
Q25027585: RNCC: 5 | RNVC: 1
Q25027585-1: RNCC: 5 | RNVC: 2

16 Mar 2006

5340-37-524-0429
Angle Bracket

375240429
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81087417-01: RNCC: 3 | RNVC: 2
A81087417-01: RNCC: 5 | RNVC: 2
A81087417: RNCC: D | RNVC: 9

8 Aug 2012

5340-37-502-8254
Plate

375028254
60052229: RNCC: 3 | RNVC: 2

18 Aug 1994

5340-37-525-2773
Lock Plate

375252773
Q65800167: RNCC: D | RNVC: 9

15 Jan 2013

5340-37-502-8168
Plate

375028168
60051421: RNCC: 3 | RNVC: 2

10 Aug 1994

5340-37-140-0256
Ring

371400256
70009085: RNCC: 3 | RNVC: 2
KDS 1055-1005: RNCC: 4 | RNVC: 1
5340-97-140-0256: RNCC: 5 | RNVC: 9

10 Jan 1992

5340-37-521-4919
Spring Holder

375214919
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81005382-02: RNCC: 3 | RNVC: 2
A81005382-02: RNCC: 5 | RNVC: 2
A81005382: RNCC: D | RNVC: 9

27 Jun 2011

5340-37-526-3144
Trm Filter Cover

375263144
A50048979: RNCC: 3 | RNVC: 2
A50048979-3: RNCC: 5 | RNVC: 2

4 Jul 2013

5340-37-523-0741
Mounting Bracket

375230741
KDS 5895-4032: RNCC: 2 | RNVC: 1
50140657-03: RNCC: 3 | RNVC: 2
50140657-03: RNCC: 5 | RNVC: 2
50140657: RNCC: D | RNVC: 9

20 Apr 2012

5340-37-521-9742
Access Cover

375219742
KDS 2350-4003: RNCC: 2 | RNVC: 1
61543291: RNCC: 3 | RNVC: 2
61543291: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-37-507-4896
Loop Clamp

375074896
KDS 1375-3003: RNCC: 2 | RNVC: 1
Q35011824: RNCC: 3 | RNVC: 2

13 Nov 2000

5340-37-511-8960
Angle Bracket

375118960
85Y9131-181: RNCC: 3 | RNVC: 2
85Y9131-181: RNCC: 5 | RNVC: 2

28 Apr 2005

5340-37-519-2051
Access Cover

375192051
81362979: RNCC: 3 | RNVC: 2
81362979: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-37-516-8715
Access Cover

375168715
80095562: RNCC: 3 | RNVC: 2
80095562: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-507-2106
Mounting Plate

375072106
20120311: RNCC: 3 | RNVC: 2
20120311: RNCC: 5 | RNVC: 2

25 Jul 2000

5340-37-519-3163
Mounting Bracket

375193163
81364991: RNCC: 3 | RNVC: 2
81364991: RNCC: 5 | RNVC: 2

11 Mar 2010

5340-37-520-9205
Mounting Plate

375209205
A60068006: RNCC: 3 | RNVC: 2
A60068006: RNCC: 5 | RNVC: 2

3 Mar 2011

5340-37-521-0671
Mounting Bracket

375210671
50136842: RNCC: 3 | RNVC: 2
50136842: RNCC: 5 | RNVC: 2

31 Mar 2011

5340-37-525-5267
Quick Release Plunger

375255267
PMXYSB8: RNCC: 3 | RNVC: 2

4 Feb 2013

5340-37-501-3029
Access Cover

375013029
60747011: RNCC: 3 | RNVC: 2
60747011: RNCC: 5 | RNVC: 2

10 May 1989

5340-37-512-2504
Swivel Caster

375122504
GD-80F: RNCC: 3 | RNVC: 2
GD-80F: RNCC: 5 | RNVC: 2

12 Jul 2005

5340-37-522-8022
Helical Compression Spring Seat

375228022
KSF-33 ITEM 11: RNCC: 3 | RNVC: 2

8 Mar 2012

5340-37-506-7499
Butt Hinge

375067499
KDS 1510-4001: RNCC: 2 | RNVC: 1
81575878-01: RNCC: 5 | RNVC: 9
81575878: RNCC: 5 | RNVC: 9

2 Dec 1999

5340-37-511-1512
Vent Plug

375111512
60444941: RNCC: 3 | RNVC: 2
60444941: RNCC: 5 | RNVC: 2

3 Sep 2004

5340-37-509-3170
Threaded Rod End

375093170
10870275: RNCC: 3 | RNVC: 2

25 Oct 2002

5340-37-514-0844

5340-37-508-4358
Driver Bracket Asse

375084358
20119098: RNCC: 3 | RNVC: 2

7 Jan 2002

5340-37-509-7925
Mounting Plate

375097925
Q55108734: RNCC: 3 | RNVC: 2
Q55108734: RNCC: 5 | RNVC: 2

29 May 2003

5340-37-518-7257
Shimmy Damper

375187257
5404-1650-20: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-37-509-4281
Double Angle Bracket

375094281
60635486: RNCC: 3 | RNVC: 2
60635486: RNCC: 3 | RNVC: 2
2520-37-A13-4361: RNCC: 5 | RNVC: 2

17 Dec 2002

5340-37-522-0041
Angle Bracket

375220041
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81009524: RNCC: 3 | RNVC: 2
A81009524-01: RNCC: 3 | RNVC: 2
A81009524-01: RNCC: 5 | RNVC: 2

1 Nov 2011

5340-37-509-2610
Oil Filler Tu Plate

375092610
60618831: RNCC: 3 | RNVC: 2
60618831: RNCC: 3 | RNVC: 2
29510242,T/M8-31: RNCC: 5 | RNVC: 2

2 Oct 2002

5340-37-520-8680
Bow Handle

375208680
KA-1251-5: RNCC: 3 | RNVC: 2

22 Feb 2011

5340-37-506-0225
Mounting Bracket

375060225
KDS 2350-1024: RNCC: 2 | RNVC: 1
60347348: RNCC: 3 | RNVC: 2

27 Jul 1999

5340-37-518-5781
Section Block Clamp

375185781
60824418: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60824418: RNCC: 5 | RNVC: 2

20 Aug 2009

5340-37-513-2846
Rod

375132846
219-21-202: RNCC: 3 | RNVC: 2

20 Nov 2006

5340-37-505-4780
Angle Bracket

375054780
81025501: RNCC: 3 | RNVC: 2
81025501-05: RNCC: 5 | RNVC: 2

25 Jan 1999

5340-37-505-8246
Mounting Bracket

375058246
KDS 1510-4001: RNCC: 2 | RNVC: 1
81324301: RNCC: 5 | RNVC: 9
81324301-01: RNCC: 5 | RNVC: 9

15 Jun 1999

5340-37-516-7618
Access Cover

375167618
60825550: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60825550: RNCC: 5 | RNVC: 2

10 Mar 2009

5340-37-522-4026
Rod End Connector

375224026
35-94570-3403: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-37-519-1239
Angle Bracket

375191239
81534437-01: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-508-7531
Spring Tension Clip

375087531
Q65039030-1: RNCC: 3 | RNVC: 2
Q65039030: RNCC: 3 | RNVC: 2

1 Apr 2002

5340-37-525-5892
Mounting Plate

375255892
83045620: RNCC: 3 | RNVC: 2

14 Feb 2013

5340-37-508-8679
Left Large Jig

375088679
Q65038940: RNCC: 3 | RNVC: 2
Q65038940: RNCC: 3 | RNVC: 2

26 Apr 2002

5340-37-526-4302
Access Cover

375264302
61516230: RNCC: 3 | RNVC: 2
61516230: RNCC: 5 | RNVC: 2

18 Jul 2013

5340-37-508-2684
Azimuth Buffer

375082684
95007840: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-37-524-7630
Mounting Bracket

375247630
91035640: RNCC: 3 | RNVC: 2
91035640: RNCC: 5 | RNVC: 2

26 Oct 2012

5340-37-508-9625
Butt Hinge

375089625
KDS5895-1036-3: RNCC: 2 | RNVC: 1
50105974: RNCC: 3 | RNVC: 2
50105974: RNCC: 3 | RNVC: 2

4 Jun 2002

5340-37-506-4916
Mounting Plate

375064916
KDS 2350-1024: RNCC: 2 | RNVC: 1
60342804: RNCC: 3 | RNVC: 2
60342804-1: RNCC: 3 | RNVC: 2

22 Sep 1999

5340-37-526-7757
Mounting Plate

375267757
AR210-0202-309-16: RNCC: 3 | RNVC: 2

30 Aug 2013

5340-37-502-4183
Air Inlet-Outlet Frame

375024183
60773930: RNCC: 3 | RNVC: 2
60773930: RNCC: 5 | RNVC: 2

11 May 1993

5340-37-524-3663
Mounting Plate

375243663
61518335: RNCC: 3 | RNVC: 2
61518335: RNCC: 5 | RNVC: 2

31 Aug 2012

5340-37-501-2937
Manual Control Handle

375012937
60734802: RNCC: 3 | RNVC: 2
60734802: RNCC: 5 | RNVC: 2

3 May 1989

5340-37-512-1993
Access Cover

375121993
Q65055493: RNCC: 3 | RNVC: 2
Q65055493: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-37-510-5097
Angle Bracket

375105097
80075397: RNCC: 3 | RNVC: 1
80075397: RNCC: 5 | RNVC: 9

18 Mar 2004

5340-37-506-8935
Door Handle

375068935
Q45015463: RNCC: 3 | RNVC: 2
Q45015463: RNCC: 3 | RNVC: 9

26 Jan 2000

5340-37-507-2902
Right Wing

375072902
20111111: RNCC: 5 | RNVC: 9

24 Aug 2000

5340-37-556-3540

5340-37-005-5663
Mission Oil Ring

370055663
5340-97-005-5663: RNCC: 2 | RNVC: 2
70671617: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-517-4234
Bellows

375174234
61533878: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61533878: RNCC: 5 | RNVC: 2

5 Jun 2009

5340-37-527-0302
Mounting Bracket

375270302
81107786: RNCC: 3 | RNVC: 2
81107786: RNCC: 5 | RNVC: 2

8 Oct 2013

5340-37-519-1447
Synchro Clamp

375191447
60310467: RNCC: 3 | RNVC: 2
60310467: RNCC: 5 | RNVC: 2

18 Jan 2010

5340-37-518-8877
Double Angle Bracket

375188877
93015472: RNCC: 3 | RNVC: 2
93015472: RNCC: 5 | RNVC: 2

23 Nov 2009

5340-37-510-6613
Mounting Bracket

375106613
70021443: RNCC: 3 | RNVC: 1
70021443: RNCC: 5 | RNVC: 2

24 Apr 2004

5340-37-502-5305
Cushioning Pad

375025305
60079506: RNCC: 3 | RNVC: 2

19 Nov 1993

5340-37-519-3157
Mounting Bracket

375193157
81364976: RNCC: 3 | RNVC: 2
81364976: RNCC: 5 | RNVC: 2

10 Mar 2010

5340-37-504-8425
Spring Tension Clip

375048425
KDS 2320-1023: RNCC: 2 | RNVC: 1
60381010: RNCC: 5 | RNVC: 9
60381010: RNCC: 5 | RNVC: 9

31 Oct 1997

5340-37-130-2495
Spring Tension Clip

371302495
60141042: RNCC: 3 | RNVC: 2
60141042: RNCC: 3 | RNVC: 2
KG0160544A: RNCC: 3 | RNVC: 2
KDS 2320-1004.: RNCC: 4 | RNVC: 1
2530-97-130-2495: RNCC: 5 | RNVC: 9

23 Nov 1989

5340-37-510-7364
Mounting Bracket

375107364
60576236: RNCC: 3 | RNVC: 2
60576236: RNCC: 5 | RNVC: 2

25 May 2004

5340-37-511-0397
Bracket Assembly

375110397
Q65069105: RNCC: 3 | RNVC: 1
Q65069105: RNCC: 3 | RNVC: 2

4 Aug 2004

5340-37-511-4128
Emi Breather

375114128
Q55110714: RNCC: 3 | RNVC: 2
Q55110714: RNCC: 5 | RNVC: 2

18 Dec 2004

5340-37-510-3494
Multiple Angle Bracket

375103494
80044648: RNCC: 3 | RNVC: 2

12 Jan 2004

5340-37-506-3868
Screw Thread Insert

375063868
KDS 2350-1024: RNCC: 2 | RNVC: 1
KSB0201,M8X1.25X2.0D: RNCC: 3 | RNVC: 2

1 Sep 1999

5340-37-503-9856
Electronic Equipment Hardware Kit

375039856
KM-5830-1269: RNCC: 2 | RNVC: 2
50074586: RNCC: 3 | RNVC: 2
VIC-7K: RNCC: 5 | RNVC: 2

4 Apr 1996

5340-37-526-9508
Angle Bracket

375269508
A81062399-02: RNCC: 3 | RNVC: 2
A81062399-02: RNCC: 5 | RNVC: 2
A81062399: RNCC: D | RNVC: 9

17 Sep 2013

5340-37-526-8741
Access Cover

375268741
DHHC-STD-PD-IM-1: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-37-506-6771
Webbing Strap

375066771
KDS 2350-1024: RNCC: 2 | RNVC: 1
60348540: RNCC: 3 | RNVC: 2

16 Nov 1999

5340-37-518-9751
Angle Bracket

375189751
85T2602-125: RNCC: 3 | RNVC: 2
85T2602-125: RNCC: 5 | RNVC: 2

4 Dec 2009

5340-37-526-9146
Mounting Plate

375269146
85A5600-041: RNCC: 3 | RNVC: 2
85A5600-041: RNCC: 5 | RNVC: 2

12 Sep 2013

5340-37-512-0699
Nut And Bolt Retainer

375120699
KDS 1730-4001: RNCC: 2 | RNVC: 2
KDS 1730-4001: RNCC: 3 | RNVC: 2
Q85013748: RNCC: 3 | RNVC: 2
Q85013748: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-37-114-4898
Ring

371144898
5340-97-114-4898: RNCC: 2 | RNVC: 2
60402926: RNCC: 3 | RNVC: 2
KDS 2320-1005: RNCC: 4 | RNVC: 1

23 Nov 1987

5340-37-510-4727
Double Angle Bracket

375104727
Q65062158: RNCC: 3 | RNVC: 2
Q65062158: RNCC: 3 | RNVC: 2

8 Mar 2004

5340-37-507-0971
Mounting Plate

375070971
20101132: RNCC: 5 | RNVC: 9

15 May 2000

5340-37-518-2940
Missile Fix Bracket

375182940
688-67-127: RNCC: 5 | RNVC: 2

27 Jul 2009

5340-37-510-1866
Starter Access Door

375101866
Q55025998: RNCC: 3 | RNVC: 2
Q55025998: RNCC: 3 | RNVC: 9

10 Nov 2003

5340-37-511-3277
Ground Plate

375113277
40017234: RNCC: 3 | RNVC: 2
40017234: RNCC: 5 | RNVC: 2

3 Nov 2004

5340-37-518-0182
Mounting Bracket

375180182
60822112: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60822112: RNCC: 5 | RNVC: 2

6 Jul 2009

5340-37-525-3279
Resilient Mount Plate

375253279
11V-00151: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-37-516-7343
Mounting Bracket

375167343
82272881-01: RNCC: 3 | RNVC: 2
82272881: RNCC: 3 | RNVC: 2

3 Mar 2009

5340-37-510-7294
Tube Cover

375107294
60442792: RNCC: 3 | RNVC: 2
60442792: RNCC: 3 | RNVC: 2

19 May 2004

5340-37-526-3190
Dust And Moisture Seal Protective Plug

375263190
81079779: RNCC: 3 | RNVC: 2
81079779: RNCC: 5 | RNVC: 2

5 Jul 2013

5340-37-511-5997
Temperature Sw Body

375115997
95010501: RNCC: 3 | RNVC: 2
95010501: RNCC: 5 | RNVC: 9

25 Feb 2005

5340-37-505-5369
Angle Bracket

375055369
Q55016219: RNCC: 3 | RNVC: 2

19 Feb 1999

5340-37-522-4157
Angle Bracket

375224157
KDC 1680-T4005: RNCC: 2 | RNVC: 1
A81025563: RNCC: 3 | RNVC: 2
A81025563-01: RNCC: 3 | RNVC: 2
A81025563-01: RNCC: 5 | RNVC: 2
A81025563-01: RNCC: 5 | RNVC: 2

28 Dec 2011

5340-37-511-1153
Cushioning Pad

375111153
60671491: RNCC: 3 | RNVC: 2
60671491-1: RNCC: 5 | RNVC: 2

25 Aug 2004

5340-37-557-0652
Cover

375570652
SM-B-561872-1: RNCC: 5 | RNVC: 1

14 Apr 2004

5340-37-515-5918
Nut And Bolt Locking Plate

375155918
91005-90-019: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-37-522-6343
Mounting Bracket

375226343
50143686: RNCC: 3 | RNVC: 2
50143686: RNCC: 5 | RNVC: 2

10 Feb 2012

5340-37-527-2168
Mounting Bracket

375272168
A50058773: RNCC: 3 | RNVC: 2
A50058773: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-37-518-5811
Access Cover

375185811
60824646: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60824646: RNCC: 5 | RNVC: 2

21 Aug 2009

5340-37-510-9914
Bail Handle

375109914
Q55606972: RNCC: 3 | RNVC: 1
Q55606972-1: RNCC: 3 | RNVC: 2

24 Jul 2004

5340-37-522-0542
Mounting Bracket

375220542
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81077110-01: RNCC: 3 | RNVC: 2
A81077110-01: RNCC: 5 | RNVC: 2
A81077110: RNCC: D | RNVC: 9

7 Nov 2011

5340-37-521-4234
Mounting Bracket

375214234
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81005101-02: RNCC: 3 | RNVC: 2
A81005101-02: RNCC: 5 | RNVC: 2
A81005101: RNCC: D | RNVC: 9

16 Jun 2011

5340-37-512-1925
Rh Retainer

375121925
Q65082131: RNCC: 3 | RNVC: 2
Q65082131-1: RNCC: 5 | RNVC: 2

30 Jun 2005

5340-37-522-4981
Mounting Bracket

375224981
50140201: RNCC: 3 | RNVC: 2
50140201: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-37-507-3570
Access Cover

375073570
KDS 3950-3002: RNCC: 2 | RNVC: 1
95005976: RNCC: 3 | RNVC: 2
95005976: RNCC: 5 | RNVC: 2

14 Sep 2000

5340-37-522-5477
Double Angle Bracket

375225477
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85E6526-615: RNCC: 3 | RNVC: 2
85E6526-615: RNCC: 5 | RNVC: 2

30 Jan 2012

5340-37-521-8669
Mounting Bracket

375218669
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81240118-02: RNCC: 3 | RNVC: 2
A81240118-02: RNCC: 5 | RNVC: 2
A81240118: RNCC: D | RNVC: 9

20 Sep 2011

5340-37-510-8331
Synchro Clamp

375108331
Q65059155: RNCC: 3 | RNVC: 2
Q65059155: RNCC: 3 | RNVC: 2

3 Jul 2004

5340-37-502-4320
Angle Bracket

375024320
4068312360: RNCC: 3 | RNVC: 2
60741889: RNCC: 3 | RNVC: 2
60741889: RNCC: 5 | RNVC: 2

24 May 1993

5340-37-516-0281
Plug

375160281
60084816: RNCC: 3 | RNVC: 2
60084816: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-512-8434
Guard Plate Frame

375128434
Q25025051-2: RNCC: 3 | RNVC: 2
Q25025051: RNCC: 5 | RNVC: 1
Q25025051-2: RNCC: 5 | RNVC: 2

17 Feb 2006

5340-37-515-5923
Nut And Bolt Locking Plate

375155923
91007-07-033: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-37-521-8660
Angle Bracket

375218660
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81240102-02: RNCC: 3 | RNVC: 2
A81240102-02: RNCC: 5 | RNVC: 2
A81240102: RNCC: D | RNVC: 9

20 Sep 2011

5340-37-522-0043
Mounting Bracket

375220043
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81016109-01: RNCC: 3 | RNVC: 2
A81016109-01: RNCC: 5 | RNVC: 2
A81016109: RNCC: D | RNVC: 9

1 Nov 2011

5340-37-511-4900
Double Angle Bracket

375114900
85B1801-009: RNCC: 3 | RNVC: 2
85B1801-009: RNCC: 5 | RNVC: 2

12 Jan 2005

5340-37-517-7178
Mounting Bracket

375177178
60821854: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60821854: RNCC: 5 | RNVC: 2

26 Jun 2009

5340-37-525-2867
Mounting Bracket

375252867
Q65800194-1: RNCC: D | RNVC: 9

16 Jan 2013

5340-37-516-0384
Hinge Link

375160384
91028217: RNCC: 3 | RNVC: 2
91028217: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-517-4437
Mounting Bracket

375174437
A60022665: RNCC: 3 | RNVC: 2
A60022665: RNCC: 5 | RNVC: 2

8 Jun 2009

5340-37-520-1089
Mounting Bracket

375201089
A20006354: RNCC: 3 | RNVC: 2
A20006354: RNCC: 5 | RNVC: 2

7 Oct 2010

5340-37-515-8790
Lock Bolt

375158790
Q65061493: RNCC: 3 | RNVC: 2
Q65061493: RNCC: 5 | RNVC: 2

13 Oct 2008

5340-37-523-1658
Mounting Bracket

375231658
83100857: RNCC: 3 | RNVC: 2
83100857: RNCC: 5 | RNVC: 2

14 May 2012

5340-37-515-3072
Lower Guide

375153072
50133461: RNCC: 3 | RNVC: 2
50133461: RNCC: 5 | RNVC: 2

29 May 2008

5340-37-525-7719
Mounting Bracket

375257719
N51007055: RNCC: 3 | RNVC: 2
N51007055: RNCC: 5 | RNVC: 2

14 Mar 2013

5340-37-522-9015
Lock Bar

375229015
50139723: RNCC: 3 | RNVC: 2
50139723: RNCC: 5 | RNVC: 2

30 Mar 2012

5340-37-521-5831
Dust And Moisture Seal Protective Plug

375215831
70015696: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-37-518-7453
Angle Bracket

375187453
80047585: RNCC: 3 | RNVC: 2
80047585: RNCC: 5 | RNVC: 2

22 Oct 2009

5340-37-524-0459
Angle Bracket

375240459
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81240302-01: RNCC: 3 | RNVC: 2
A81240302-01: RNCC: 5 | RNVC: 2
A81240302: RNCC: D | RNVC: 9

8 Aug 2012

5340-37-521-6102
Mounting Bracket

375216102
KDS5855-4012: RNCC: 2 | RNVC: 1
A40008692: RNCC: 3 | RNVC: 2
A40008692: RNCC: 5 | RNVC: 2

19 Jul 2011

5340-37-523-9982
Dust And Moisture Seal Protective Cap

375239982
KDC 1680-T4005: RNCC: 2 | RNVC: 1
A81025316-01: RNCC: 3 | RNVC: 2
A81025316-01: RNCC: 5 | RNVC: 2
A81025316: RNCC: D | RNVC: 9

6 Aug 2012

5340-37-524-4473
Mounting Bracket

375244473
KHD-1080: RNCC: 3 | RNVC: 2

12 Sep 2012

5340-37-511-7683
Double Angle Bracket

375117683
85K1208-003: RNCC: 3 | RNVC: 2
85K1208-003: RNCC: 5 | RNVC: 2

31 Mar 2005

5340-37-517-9288
Nut And Bolt Retainer

375179288
WF272455-01: RNCC: 3 | RNVC: 2

1 Jul 2009

5340-37-524-2760
Fan Mount Panel

375242760
91038183-01: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-37-005-6809
Sealing Tu Ring

370056809
KDS 2950-1010: RNCC: 2 | RNVC: 1
5340-97-005-6809: RNCC: 2 | RNVC: 2
74060057: RNCC: 3 | RNVC: 2

23 Nov 1987

Load More Results