What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Quick Release Plunger?

A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is a Mortise Latch?

A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.

What is a Flush Catch?

A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).

What is a Clamp Bolt Assembly?

A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.

What is a Retaining Band?

A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.

What is a Bow Handle?

A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.

What is a Recess Handle?

A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.

What is a Bail Handle?

A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.

What is a Double Angle Bracket?

A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

What is a Strap Fastener Loop?

A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.

What is a Webbing Strap?

A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.

What is a Spring Tension Clip?

A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.

Hardware, Commercial - Korea (KR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Korea (KR) - NCB is 37

Page 44 of 56

NSN Format for Hardware, Commercial
Codified by Korea

53	40	37	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Korea (KR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 19 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 59 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 32 Items
Holder,Loop 25 Items
Holder,Spring 36 Items
What is a Rod End Connector? 58 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 89 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is a Metal Grille? 15 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 15 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 145 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 25 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 20 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Thumb Latch? 14 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 16 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 11 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Sliding Door Track? 13 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorknob? 12 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Tee Hinge? 11 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 16 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is a Butt Hinge Leaf? 45 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Mending Plate? 21 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 30 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Dust And Moisture Seal Protective Cap? 98 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 116 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 34 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 53 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 97 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 14 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Nut And Bolt Retainer? 12 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is an Angle Bracket? 1486 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 10 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Loop Clamp? 304 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 53 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 26 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 45 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 13 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flush Catch? 10 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 26 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 76 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 234 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 10 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 44 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 255 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 11 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 95 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 116 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 36 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 472 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 49 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 14 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Window Retaining Plate? 35 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 114 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 57 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Helical Compression Spring Seat? 18 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 40 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 42 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 19 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Vent Plug? 29 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 1435 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Threaded Rod End? 80 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 11 Items
What is a Manual Control Handle? 127 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Lever Bracket? 37 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 33 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 254 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 4187 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Section Block Clamp? 134 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Beam Gripping Clamp? 13 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 2701 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Synchro Clamp? 57 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 118 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Threaded Standoff? 11 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 36 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 247 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 33 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Runner? 23 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Track Stop? 13 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 30 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Masking Plate? 18 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 318 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 48 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Sliding Block? 18 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 41 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 25 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Shimmy Damper? 13 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 124 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 21 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Resilient Mount Plate? 12 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 80 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 11 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 91 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Locking Stay? 13 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 26 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Aircraft Latch Hook? 19 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 55 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 44 of 56

5340-37-506-4767
Cover

375064767
KDS 2350-1024: RNCC: 2 | RNVC: 1
60027526: RNCC: 3 | RNVC: 2

17 Sep 1999

5340-37-512-8277
Angle Bracket

375128277
Q25023277: RNCC: 3 | RNVC: 2
Q25023277: RNCC: 5 | RNVC: 2

14 Feb 2006

5340-37-515-2780
Mounting Bracket

375152780
50143720: RNCC: 3 | RNVC: 2
50143720: RNCC: 5 | RNVC: 2

20 May 2008

5340-37-501-4836
Angle Bracket

375014836
60723565: RNCC: 3 | RNVC: 2
60723566: RNCC: 3 | RNVC: 2
60723566: RNCC: 5 | RNVC: 2
60723565: RNCC: 5 | RNVC: 2

17 Jan 1990

5340-37-134-3563
Connection Clamp

371343563
5340-97-134-3563: RNCC: 2 | RNVC: 2
1394811: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-521-0803
Cowling Lock

375210803
A81016372-02: RNCC: 3 | RNVC: 2
A81016372-02: RNCC: 5 | RNVC: 2
A81016372: RNCC: D | RNVC: 9

5 Apr 2011

5340-37-510-4901
Mounting Bracket

375104901
80075367-01: RNCC: 5 | RNVC: 9

16 Mar 2004

5340-37-510-0145
Mounting Bracket

375100145
82911411: RNCC: 3 | RNVC: 2
82911411-01: RNCC: 5 | RNVC: 2

22 Aug 2003

5340-37-511-0560
Mounting Bracket

375110560
Q25020704: RNCC: 3 | RNVC: 2
25020704: RNCC: 5 | RNVC: 2

8 Aug 2004

5340-37-519-3660
Access Cover

375193660
A20008063: RNCC: 3 | RNVC: 2
A20008063: RNCC: 5 | RNVC: 2

22 Mar 2010

5340-37-504-4050
Bracket

375044050
KDS 1285-1011: RNCC: 2 | RNVC: 1
50095584: RNCC: 5 | RNVC: 9
50095584: RNCC: 5 | RNVC: 9

25 Sep 1996

5340-37-521-6008
Mounting Plate

375216008
A60067158-1: RNCC: 3 | RNVC: 2
A60067158-1: RNCC: 5 | RNVC: 2
A60067158: RNCC: D | RNVC: 9

19 Jul 2011

5340-37-507-4514

5340-37-507-6192

5340-37-517-4358

5340-37-508-5414
Flare Lock Fastener

375085414
Q65034863: RNCC: 3 | RNVC: 2

1 Feb 2002

5340-37-522-3512
Mounting Bracket

375223512
KDC 2835-T4002: RNCC: 2 | RNVC: 1
A80611565: RNCC: 3 | RNVC: 2
A80611565-01: RNCC: 3 | RNVC: 2
A80611565-01: RNCC: 5 | RNVC: 2

21 Dec 2011

5340-37-510-6943
Mounting Bracket

375106943
70019813: RNCC: 3 | RNVC: 2
70019813: RNCC: 5 | RNVC: 2

30 Apr 2004

5340-37-522-3256
Mounting Bracket

375223256
50138032: RNCC: 3 | RNVC: 2
50138032: RNCC: 5 | RNVC: 2

19 Dec 2011

5340-37-524-3207
Mounting Plate

375243207
D60839514: RNCC: 3 | RNVC: 2

28 Aug 2012

5340-37-502-7079
Mounting Bracket

375027079
60063230: RNCC: 3 | RNVC: 2

20 May 1994

5340-37-510-3421
Multiple Angle Bracket

375103421
81046530: RNCC: 3 | RNVC: 2
81046530: RNCC: 5 | RNVC: 9

9 Jan 2004

5340-37-130-1021
Differential Shim

371301021
5340-97-130-1021: RNCC: 2 | RNVC: 2
4HA-049: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-004-1459
Plate

370041459
KDS 4230-1001: RNCC: 2 | RNVC: 1
5340-97-004-1459: RNCC: 2 | RNVC: 2

23 Nov 1987

5340-37-504-9050
Resilient Mount

375049050
KDS 2320-1023: RNCC: 2 | RNVC: 1
60382590: RNCC: 5 | RNVC: 9
60382590: RNCC: 5 | RNVC: 9

14 Nov 1997

5340-37-515-6541
Cushioning Pad

375156541
KDS 2350-1024: RNCC: 2 | RNVC: 1
60359116: RNCC: 3 | RNVC: 2
60359116: RNCC: 5 | RNVC: 2

21 Aug 2008

5340-37-521-8607
Block Clamp

375218607
KDS 2350-4003: RNCC: 2 | RNVC: 1
61530656: RNCC: 3 | RNVC: 2
61530656: RNCC: 5 | RNVC: 2

19 Sep 2011

5340-37-522-5819
Multiple Angle Bracket

375225819
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85Y9134-621: RNCC: 3 | RNVC: 2
85Y9134-621: RNCC: 5 | RNVC: 2

2 Feb 2012

5340-37-527-0041
Thumb Latch

375270041
KC-109-3: RNCC: 3 | RNVC: 2

2 Oct 2013

5340-37-130-1019
Differential Shim

371301019
5340-97-130-1019: RNCC: 2 | RNVC: 2
4HA-047: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-515-5921
Metal Grille

375155921
91005-50-127: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-37-517-9276
Mounting Bracket

375179276
60821986: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60821986: RNCC: 5 | RNVC: 2

30 Jun 2009

5340-37-521-8385
Mounting Bracket

375218385
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81061424: RNCC: 3 | RNVC: 2
A81061424-01: RNCC: 5 | RNVC: 2

15 Sep 2011

5340-37-518-7861
Doorknob

375187861
60815719: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60815719: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-521-9996
Angle Bracket

375219996
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81001117: RNCC: 3 | RNVC: 2
A81001117-01: RNCC: 3 | RNVC: 2
A81001117-01: RNCC: 5 | RNVC: 2

1 Nov 2011

5340-37-524-3260
Mounting Bracket

375243260
KDS 5880-4001: RNCC: 2 | RNVC: 1
A40001457: RNCC: 3 | RNVC: 2
A40001457: RNCC: 5 | RNVC: 2

28 Aug 2012

5340-37-523-1289
Mounting Actuator Plate

375231289
A60067301: RNCC: 3 | RNVC: 2
A60067301: RNCC: 5 | RNVC: 2

4 May 2012

5340-37-506-2230
Uppe Plate Assembly

375062230
80040222: RNCC: 5 | RNVC: 9

17 Aug 1999

5340-37-525-1647
Mounting Bracket

375251647
91014563: RNCC: 3 | RNVC: 2
91014563: RNCC: 5 | RNVC: 2

9 Jan 2013

5340-37-510-0823
Lock-Release Lever

375100823
81043467: RNCC: 5 | RNVC: 9
81043467: RNCC: 5 | RNVC: 9

16 Sep 2003

5340-37-510-7579
Clamp Bolt Assembly

375107579
AD20400038: RNCC: 3 | RNVC: 2
20400038: RNCC: 3 | RNVC: 2
AD20400038: RNCC: 3 | RNVC: 2

3 Jun 2004

5340-37-516-5550
Hand Crank

375165550
20030328: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030328: RNCC: 5 | RNVC: 2

23 Dec 2008

5340-37-509-4167
Winch Mount

375094167
KDS 2350-1008: RNCC: 2 | RNVC: 1
60652005: RNCC: 3 | RNVC: 2
60652005: RNCC: 3 | RNVC: 2
2520-37-A15-3222: RNCC: 5 | RNVC: 2

7 Dec 2002

5340-37-556-0100
Stud Tee Coupling

375560100
N8AH6.3: RNCC: 5 | RNVC: 1

22 Mar 2004

5340-37-508-9015
Synchro Clamp

375089015
Q55401305: RNCC: 5 | RNVC: 2

11 May 2002

5340-37-513-3647
Mounting Bracket

375133647
Q65024474: RNCC: 3 | RNVC: 2
Q65024474: RNCC: 5 | RNVC: 2

22 Dec 2006

5340-37-514-8179
Retaining Clip

375148179
50138153: RNCC: 3 | RNVC: 2
50138153: RNCC: 5 | RNVC: 2

12 Mar 2008

5340-37-516-3181
Runner

375163181
83030905: RNCC: 3 | RNVC: 2
83030905: RNCC: 5 | RNVC: 2

12 Nov 2008

5340-37-526-6749
Mounting Plate

375266749
A90027233: RNCC: 3 | RNVC: 2
A90027233: RNCC: 5 | RNVC: 2

20 Aug 2013

5340-37-511-7256
Angle Bracket

375117256
85Y5091-123: RNCC: 3 | RNVC: 2
85Y5091-123: RNCC: 5 | RNVC: 2

25 Mar 2005

5340-37-526-5190
Mounting Plate

375265190
85B5202-013: RNCC: 3 | RNVC: 2
85B5202-013: RNCC: 5 | RNVC: 2

25 Jul 2013

5340-37-505-7370
Double Angle Bracket

375057370
KDS 1510-4001: RNCC: 2 | RNVC: 1
81275306: RNCC: 3 | RNVC: 2
81275306-01: RNCC: 5 | RNVC: 2

21 May 1999

5340-37-518-9843
Plate Assembly

375189843
61503655: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61503655: RNCC: 5 | RNVC: 2

4 Dec 2009

5340-37-513-2695
Retaining Band

375132695
2A46MSB106-1: RNCC: 3 | RNVC: 2

7 Nov 2006

5340-37-520-5977
Mounting Bracket

375205977
A20015797: RNCC: 3 | RNVC: 2
A20015797: RNCC: 5 | RNVC: 2

20 Dec 2010

5340-37-524-5164
Vent Plug

375245164
Q65303256: RNCC: 3 | RNVC: 2
Q65303256: RNCC: 5 | RNVC: 2

24 Sep 2012

5340-37-515-7523
Blank Panel

375157523
83014217: RNCC: 3 | RNVC: 2
83014217: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-524-4994
Side Panel

375244994
91039159-02: RNCC: 3 | RNVC: 2
91039159-02: RNCC: 5 | RNVC: 2
91039159: RNCC: D | RNVC: 9

24 Sep 2012

5340-37-526-8915
Mounting Bracket

375268915
A81240135-01: RNCC: 3 | RNVC: 2
A81240135-01: RNCC: 5 | RNVC: 2
A81240135: RNCC: D | RNVC: 9

11 Sep 2013

5340-37-504-8681
Pipe Hanger

375048681
KDS 2320-1023: RNCC: 2 | RNVC: 1
60380408: RNCC: 5 | RNVC: 9
60380408: RNCC: 5 | RNVC: 9

7 Nov 1997

5340-37-007-1025
O-Ring

370071025
KDS 2815-1208: RNCC: 2 | RNVC: 1
A80001020: RNCC: 3 | RNVC: 2

17 Sep 2001

5340-37-526-4988
Mounting Plate

375264988
WB13-S01-01: RNCC: 3 | RNVC: 2

25 Jul 2013

5340-37-506-4795
Double Angle Bracket

375064795
81954301: RNCC: 5 | RNVC: 9
81954301-01: RNCC: 5 | RNVC: 9

18 Sep 1999

5340-37-518-9359
Mounting Bracket

375189359
60819808: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60819808: RNCC: 5 | RNVC: 2

1 Dec 2009

5340-37-518-3293
Needle Bearin Guide

375183293
345-72705-5: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-37-508-4956
Loop Clamp

375084956
Q65027621: RNCC: 3 | RNVC: 2

22 Jan 2002

5340-37-509-1791
Stopper

375091791
Q65038816: RNCC: 3 | RNVC: 2
Q65038810: RNCC: 5 | RNVC: 2

3 Sep 2002

5340-37-514-9794
Mounting Bracket

375149794
50145623: RNCC: 3 | RNVC: 2
50145623: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-37-516-1506
Angle Bracket

375161506
A80014654: RNCC: 3 | RNVC: 2
A80014654: RNCC: 5 | RNVC: 2

3 Nov 2008

5340-37-508-0322
Piston Rod And

375080322
80266420: RNCC: 5 | RNVC: 2

10 Sep 2001

5340-37-509-9510
Mounting Bracket

375099510
KDS 1510-4001: RNCC: 2 | RNVC: 1
82391226: RNCC: 5 | RNVC: 9
82391226-01: RNCC: 5 | RNVC: 9
82391226-01: RNCC: 5 | RNVC: 9
82391226: RNCC: 5 | RNVC: 9

7 Aug 2003

5340-37-557-2032
Emergency Shut-Off

375572032
KDS 1510-1003: RNCC: 2 | RNVC: 1
81292141: RNCC: 3 | RNVC: 2
81292141-01: RNCC: 5 | RNVC: 1

14 Apr 2004

5340-37-132-1099
Ma Retainer Ring

371321099
5340-97-132-1099: RNCC: 2 | RNVC: 2

23 Nov 1987

5340-37-515-7406
Rim Clenching Clamp

375157406
KDS 2320-4009: RNCC: 2 | RNVC: 1
A60022225: RNCC: 3 | RNVC: 2
A60022225: RNCC: 5 | RNVC: 2

24 Sep 2008

5340-37-518-6907
Mounting Bracket

375186907
61525868: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61525868: RNCC: 5 | RNVC: 2

28 Sep 2009

5340-37-503-4529
Support Assembly

375034529
KDC2350-P0001-16: RNCC: 2 | RNVC: 1
60621473: RNCC: 5 | RNVC: 9

25 Jul 1995

5340-37-507-4897
Bail Handle

375074897
KDS 1375-3003: RNCC: 2 | RNVC: 1
Q35011827: RNCC: 3 | RNVC: 2

13 Nov 2000

5340-37-521-7045
Section Block Clamp

375217045
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81152303: RNCC: 3 | RNVC: 2
A81152303-03: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-37-521-6747
Double Angle Bracket

375216747
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81034318: RNCC: 3 | RNVC: 2
A81034318-01: RNCC: 5 | RNVC: 2

28 Jul 2011

5340-37-520-5414
Mounting Plate

375205414
KDS 1510-4002: RNCC: 2 | RNVC: 1
85B1252-019: RNCC: 3 | RNVC: 2
85B1252-019: RNCC: 5 | RNVC: 2

13 Dec 2010

5340-37-526-9574
Crank Handle

375269574
A3209918-C: RNCC: 3 | RNVC: 2

17 Sep 2013

5340-37-508-3917
Bellows

375083917
60743351: RNCC: 3 | RNVC: 2
60743351: RNCC: 5 | RNVC: 2

12 Dec 2001

5340-37-515-1984
Mounting Plate

375151984
Q45021267: RNCC: 3 | RNVC: 2
Q45021267: RNCC: 5 | RNVC: 2

7 May 2008

5340-37-504-6211
Cushioning Pad

375046211
60044410: RNCC: 3 | RNVC: 2
60044410: RNCC: 5 | RNVC: 2

26 Apr 1997

5340-37-506-0025
Sliding Block

375060025
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341021: RNCC: 3 | RNVC: 2

23 Jul 1999

5340-37-505-7479
Rod End Clevis

375057479
81322307-01: RNCC: 5 | RNVC: 9
81322307: RNCC: 5 | RNVC: 9

25 May 1999

5340-37-523-4823
Mounting Plate

375234823
11.32044-0030.B: RNCC: 3 | RNVC: 2

18 Jun 2012

5340-37-523-2483
Access Cover

375232483
KDC 1680-T4009: RNCC: 2 | RNVC: 1
A82013855: RNCC: 3 | RNVC: 2
A82013855: RNCC: 5 | RNVC: 2

21 May 2012

5340-37-511-1204
Filter Cover Plate

375111204
60442807: RNCC: 3 | RNVC: 2
60442807: RNCC: 5 | RNVC: 2

28 Aug 2004

5340-37-524-2809
Bot Capacitor Mount

375242809
91038271: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-37-514-4004
Detent Plunger

375144004
10301.5111.078: RNCC: 3 | RNVC: 2

29 Nov 2007

5340-37-501-2854
Mounting Bracket

375012854
60730846: RNCC: 3 | RNVC: 2
60730846: RNCC: 5 | RNVC: 2

2 May 1989

5340-37-503-3623
Mounting Plate

375033623
KDS5805-1066-2: RNCC: 2 | RNVC: 1
50075880: RNCC: 3 | RNVC: 2
50075880: RNCC: 3 | RNVC: 2
50075880: RNCC: 3 | RNVC: 2
50075880: RNCC: 5 | RNVC: 2

18 Apr 1995

5340-37-506-3937
Screw Thread Insert

375063937
KDS 2350-1024: RNCC: 2 | RNVC: 1
KSB0201,M12X1.75X2.0D: RNCC: 3 | RNVC: 2

3 Sep 1999

5340-37-521-0179
Mounting Plate

375210179
A81009114: RNCC: 3 | RNVC: 2
A81009114-01: RNCC: 3 | RNVC: 2
A81009114-01: RNCC: 5 | RNVC: 2

25 Mar 2011

5340-37-505-7366
Mounting Bracket

375057366
KDS 1510-4001: RNCC: 2 | RNVC: 1
81273391: RNCC: 5 | RNVC: 9
81273391-01: RNCC: 5 | RNVC: 9

21 May 1999

5340-37-114-2834
Nonmetallic Bumper

371142834
KDC 2510-P0007: RNCC: 2 | RNVC: 1
60410015: RNCC: 3 | RNVC: 2
60410015: RNCC: 3 | RNVC: 2
KDS 2320-1005: RNCC: 4 | RNVC: 1
2530-97-114-2834: RNCC: 5 | RNVC: 9

5 Aug 1993

5340-37-511-7555
Angle Bracket

375117555
85PF9551-201: RNCC: 3 | RNVC: 2
85PF9551-201: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-37-507-3352
Flange Cover

375073352
KDS 3950-3002: RNCC: 2 | RNVC: 1
95005836: RNCC: 3 | RNVC: 2
95005836: RNCC: 5 | RNVC: 2

5 Sep 2000

5340-37-515-0560
Nut And Bolt Locking Plate

375150560
50138848: RNCC: 3 | RNVC: 1
50138848-03: RNCC: 3 | RNVC: 2
50138848-03: RNCC: 5 | RNVC: 2

17 Apr 2008

5340-37-516-7160
Mortise Lock Set

375167160
S-1103PC(LH): RNCC: 5 | RNVC: 2

19 Feb 2009

5340-37-511-4718
Fixe Plate Assembly

375114718
Q55111303: RNCC: 3 | RNVC: 2
Q55111303: RNCC: 5 | RNVC: 2

6 Jan 2005

5340-37-504-6209
Cushioning Pad

375046209
60044408: RNCC: 3 | RNVC: 2
60044408: RNCC: 5 | RNVC: 2

26 Apr 1997

5340-37-511-4136
Rail Assembly

375114136
Q55111361: RNCC: 3 | RNVC: 2
Q55111361: RNCC: 5 | RNVC: 2

18 Dec 2004

5340-37-502-0133
Angle Bracket

375020133
60773222: RNCC: 3 | RNVC: 2
60773222: RNCC: 5 | RNVC: 2

30 Sep 1991

5340-37-502-5098
Angle Bracket

375025098
60052413: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-37-502-4982
Access Cover

375024982
60073471: RNCC: 3 | RNVC: 2

28 Sep 1993

5340-37-508-2111
Push Plate

375082111
60386855: RNCC: 5 | RNVC: 2

9 Nov 2001

5340-37-515-7534
Mounting Plate

375157534
83014255: RNCC: 3 | RNVC: 2
83014255: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-518-5478
Fixture Support

375185478
A60045875: RNCC: 3 | RNVC: 2
A60045875: RNCC: 5 | RNVC: 2

17 Aug 2009

5340-37-509-1289
Access Cover

375091289
Q65035083: RNCC: 3 | RNVC: 2
Q65035084: RNCC: 3 | RNVC: 2

10 Aug 2002

5340-37-500-7600
Webbing Strap

375007600
KDS 2350-1004: RNCC: 2 | RNVC: 1
60690037: RNCC: 5 | RNVC: 9

23 May 1989

5340-37-511-8523
Rim Latch

375118523
85W1520-035: RNCC: 3 | RNVC: 2
85W1520-035: RNCC: 5 | RNVC: 2

16 Apr 2005

5340-37-518-7883
Door Handle

375187883
60815817: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60815817: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-520-1220
Angle Bracket

375201220
85B1623-037: RNCC: 3 | RNVC: 2
85B1623-037: RNCC: 5 | RNVC: 2

12 Oct 2010

5340-37-521-4359
Angle Bracket

375214359
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81005336-01: RNCC: 3 | RNVC: 2
A81005336-01: RNCC: 5 | RNVC: 2
A81005336: RNCC: D | RNVC: 9

20 Jun 2011

5340-37-521-0785
Mounting Bracket

375210785
A81016358-01: RNCC: 3 | RNVC: 2
A81016358-01: RNCC: 5 | RNVC: 2
A81016358: RNCC: D | RNVC: 9

5 Apr 2011

5340-37-521-9438
Mounting Bracket

375219438
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81506411: RNCC: 3 | RNVC: 2
A81506411-01: RNCC: 3 | RNVC: 2
A81506411-01: RNCC: 5 | RNVC: 2

30 Sep 2011

5340-37-180-3647

5340-37-516-5224
Mounting Bracket

375165224
20030268: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030268: RNCC: 5 | RNVC: 2

10 Dec 2008

5340-37-519-0842
Mounting Plate

375190842
61525110: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61525110: RNCC: 5 | RNVC: 2

22 Dec 2009

5340-37-518-7539
Mounting Bracket

375187539
60820351: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60820351: RNCC: 5 | RNVC: 2

23 Oct 2009

5340-37-502-1522
Extension Drawer Slide Section

375021522
KDS 5820-1263: RNCC: 2 | RNVC: 1
50073465: RNCC: 3 | RNVC: 2

20 Feb 1992

5340-37-516-8040
Mounting Bracket

375168040
60820603: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60820603: RNCC: 5 | RNVC: 2

13 Mar 2009

5340-37-511-4316
Angle Bracket

375114316
MBFK-SH0127-00: RNCC: 3 | RNVC: 2
MBFK-SH0127-00: RNCC: 5 | RNVC: 2

25 Dec 2004

5340-37-523-1630
Mounting Plate

375231630
83100938: RNCC: 3 | RNVC: 2
83100938: RNCC: 5 | RNVC: 2

14 May 2012

5340-37-515-3090
Upper Frame

375153090
50133464: RNCC: 3 | RNVC: 2
50133464: RNCC: 5 | RNVC: 2

30 May 2008

5340-37-512-8255
Mounting Plate

375128255
Q25024862: RNCC: 3 | RNVC: 2
Q25024862: RNCC: 5 | RNVC: 2

13 Feb 2006

5340-37-525-0283
Mounting Bracket

375250283
91014511: RNCC: 3 | RNVC: 2
91014511: RNCC: 5 | RNVC: 2

10 Dec 2012

5340-37-512-8052
Out Cartridge Guide

375128052
Q25024753: RNCC: 3 | RNVC: 2
Q25024753: RNCC: 5 | RNVC: 2

3 Feb 2006

5340-37-519-2334
Extension Drawer Slide Section

375192334
81364650: RNCC: 3 | RNVC: 2
81364650: RNCC: 5 | RNVC: 2

12 Feb 2010

5340-37-503-5415
Plate Seal

375035415
60715348: RNCC: 3 | RNVC: 2

12 Oct 1995

5340-37-519-2795
Mounting Bracket

375192795
81364278: RNCC: 3 | RNVC: 2
81364278: RNCC: 5 | RNVC: 2

5 Mar 2010

5340-37-511-1281
Housing Assembly

375111281
Q55606201: RNCC: 3 | RNVC: 2
Q55606201: RNCC: 5 | RNVC: 2

28 Aug 2004

5340-37-511-1317
Cushioning Pad

375111317
Q25020733: RNCC: 3 | RNVC: 2
25020733: RNCC: 5 | RNVC: 2

28 Aug 2004

5340-37-508-6207
Access Cover

375086207
Q65038373: RNCC: 3 | RNVC: 2

21 Feb 2002

5340-37-510-8987
Dust And Moisture Seal Protective Plug

375108987
Q65060522: RNCC: 3 | RNVC: 2
Q65060522: RNCC: 3 | RNVC: 2

14 Jul 2004

5340-37-520-6608
Mounting Bracket

375206608
KDS 1005-1389: RNCC: 2 | RNVC: 1
Q55606865: RNCC: 3 | RNVC: 2
Q55606865: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-505-9940
Lock-Release Lever

375059940
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341156: RNCC: 3 | RNVC: 2

22 Jul 1999

5340-37-513-1067
Pad

375131067
KDS 1430-1017: RNCC: 2 | RNVC: 1
80017156: RNCC: 3 | RNVC: 2
80017156: RNCC: 5 | RNVC: 2

12 Jul 2006

5340-37-521-7007
Mounting Bracket

375217007
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81057322: RNCC: 3 | RNVC: 2
A81057322-01: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-37-509-9657
Rod End Connector

375099657
37005829: RNCC: 3 | RNVC: 2
100091-OMS: RNCC: 3 | RNVC: 2

11 Aug 2003

5340-37-526-1922
Mounting Plate

375261922
91026903-01: RNCC: 3 | RNVC: 2
91026903-01: RNCC: 5 | RNVC: 2
91026903: RNCC: D | RNVC: 9

7 Jun 2013

5340-37-506-5526
Angle Bracket

375065526
KDS 1510-1003: RNCC: 2 | RNVC: 1
81761306: RNCC: 3 | RNVC: 2
81761306-01: RNCC: 3 | RNVC: 2

25 Oct 1999

5340-37-518-5953
Mounting Plate

375185953
WF537443-01: RNCC: 3 | RNVC: 2

24 Aug 2009

5340-37-506-3257
Butt Hinge

375063257
KDS 1510-4001: RNCC: 2 | RNVC: 1
81552883: RNCC: 5 | RNVC: 9
81552883-01: RNCC: 5 | RNVC: 9

24 Aug 1999

5340-37-513-9018
Lens Mounting Ring

375139018
KDS 1005-3001: RNCC: 2 | RNVC: 1
Q55602125: RNCC: 3 | RNVC: 2
Q55602125: RNCC: 5 | RNVC: 2

1 Aug 2007

5340-37-526-9122
Rubber Bumper

375269122
A81252320: RNCC: 3 | RNVC: 2
A81252320-01: RNCC: 5 | RNVC: 2

12 Sep 2013

5340-37-130-1418

5340-37-505-4797
Angle Bracket

375054797
Q55016135: RNCC: 3 | RNVC: 2

26 Jan 1999

5340-37-510-4549
Rod End Connector

375104549
Q65049768: RNCC: 3 | RNVC: 2

23 Feb 2004

5340-37-160-7535

5340-37-515-8576

5340-37-557-1368
Mudguard

375571368
AA63E-80-811B: RNCC: 5 | RNVC: 9
AA63E-80-811B: RNCC: 5 | RNVC: 9

14 Apr 2004

5340-37-515-4766
Bow Handle

375154766
H84-01-33-120: RNCC: 3 | RNVC: 2
H84-01-33-120: RNCC: 5 | RNVC: 2

7 Jul 2008

5340-37-114-3923
Stopper Rubber

371143923
5340-97-114-3923: RNCC: 2 | RNVC: 2
60424033: RNCC: 3 | RNVC: 2
60424033: RNCC: 3 | RNVC: 2
KDS 2320-1005: RNCC: 4 | RNVC: 1

23 Nov 1987

5340-37-510-3345
Angle Bracket

375103345
81045139: RNCC: 3 | RNVC: 2
81045139-02: RNCC: 5 | RNVC: 9

6 Jan 2004

5340-37-523-1204
Split Tubular Clip

375231204
83025558: RNCC: 3 | RNVC: 2
CLIP16: RNCC: 3 | RNVC: 2
83025558: RNCC: 5 | RNVC: 2

3 May 2012

5340-37-524-2248
Mounting Plate

375242248
A40008272: RNCC: 3 | RNVC: 2
A40008272: RNCC: 5 | RNVC: 2

22 Aug 2012

5340-37-508-6140
Cushioning Pad

375086140
Q65037038: RNCC: 3 | RNVC: 2

20 Feb 2002

5340-37-523-0298
Access Cover

375230298
KDC 2010-T4001: RNCC: 2 | RNVC: 1
A90013052: RNCC: 3 | RNVC: 2
A90013052: RNCC: 5 | RNVC: 2

12 Apr 2012

5340-37-519-6888
Mounting Bracket

375196888
A20008615: RNCC: 3 | RNVC: 2
A20008615: RNCC: 5 | RNVC: 2

2 Jul 2010

5340-37-519-1249
Mounting Plate

375191249
81535652-02: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-515-9663
Dust And Moisture Seal Protective Cover

375159663
A60021384-1: RNCC: 3 | RNVC: 2
A60021384-1: RNCC: 5 | RNVC: 2

20 Oct 2008

5340-37-130-2319
Safety Belt Assy

371302319
5340-97-130-2319: RNCC: 2 | RNVC: 2
KG0153620: RNCC: 3 | RNVC: 2
KG01 53 620: RNCC: 5 | RNVC: 9
KG01 53 620: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-37-519-0988
Mounting Plate

375190988
81315322-02: RNCC: 3 | RNVC: 2
81315322: RNCC: 5 | RNVC: 1
81315322-02: RNCC: 5 | RNVC: 2

31 Dec 2009

5340-37-504-4293
Resilient Mount

375044293
60065099: RNCC: 3 | RNVC: 2

11 Oct 1996

5340-37-513-2752
Filter Cleaner Flug

375132752
10.7.8004: RNCC: 3 | RNVC: 2

13 Nov 2006

5340-37-512-9265
Angle Bracket

375129265
Q25027584: RNCC: 3 | RNVC: 2
Q25027584: RNCC: 5 | RNVC: 2

16 Mar 2006

5340-37-520-6642
Dust And Moisture Seal Protective Cover

375206642
KDS 1005-1389: RNCC: 2 | RNVC: 1
Q55607501: RNCC: 3 | RNVC: 2
Q55607501: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-520-6363
Bow Handle

375206363
A20017738: RNCC: 3 | RNVC: 2
KA-1260-4: RNCC: 3 | RNVC: 2
A20017738: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-525-6334
Block Clamp

375256334
DSN1080/1140-7214: RNCC: 3 | RNVC: 2

20 Feb 2013

5340-37-506-0780
Stop

375060780
KDS 1025-1149: RNCC: 2 | RNVC: 1
20026512: RNCC: 3 | RNVC: 2

4 Aug 1999

5340-37-506-3327
Double Angle Bracket

375063327
KDS 1425-1001: RNCC: 2 | RNVC: 1
80042111: RNCC: 5 | RNVC: 9

25 Aug 1999

5340-37-526-1839
Mounting Plate

375261839
91026744-01: RNCC: 3 | RNVC: 2
91026744-01: RNCC: 5 | RNVC: 2
91026744: RNCC: D | RNVC: 9

5 Jun 2013

5340-37-521-8191
Angle Bracket

375218191
KDS1510-4002: RNCC: 2 | RNVC: 1
85Y9134-071: RNCC: 3 | RNVC: 2
85Y9134-071: RNCC: 5 | RNVC: 2

7 Sep 2011

5340-37-132-1714
Strap Assembly

371321714
60238275-1: RNCC: 3 | RNVC: 2

6 Sep 2001

5340-37-518-8867
Mounting Plate

375188867
93015449: RNCC: 3 | RNVC: 2
93015449: RNCC: 5 | RNVC: 2

23 Nov 2009

5340-37-525-7202
Mounting Bracket

375257202
A50041953: RNCC: 3 | RNVC: 2
A50041953: RNCC: 5 | RNVC: 2

7 Mar 2013

5340-37-507-0384

5340-37-508-4298

5340-37-005-4032
Transmission Ring

370054032
KDC 3805-P0001: RNCC: 2 | RNVC: 1
5340-97-005-4032: RNCC: 2 | RNVC: 2
70048705: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-520-3766
Angle Bracket

375203766
85T7371-109: RNCC: 3 | RNVC: 2
85T7371-109: RNCC: 5 | RNVC: 2

30 Nov 2010

5340-37-518-7899
Mounting Bracket

375187899
60815867: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60815867: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-005-1338
Ring;Lift Cylind

370051338
KDS 5340-1322: RNCC: 2 | RNVC: 1
5340-97-005-1338: RNCC: 2 | RNVC: 2
70931231: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-510-1563
Dust And Moisture Seal Protective Cover

375101563
20112286: RNCC: 3 | RNVC: 2
20112286: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-37-180-3689

5340-37-519-2391
Mounting Bracket

375192391
599-41313-00: RNCC: 3 | RNVC: 2
599-41313-00: RNCC: 3 | RNVC: 2

18 Feb 2010

5340-37-521-5829
Bow Handle

375215829
A-2: RNCC: 3 | RNVC: 2

14 Jul 2011

5340-37-506-3932
Manual Control Handle

375063932
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341259: RNCC: 3 | RNVC: 2

3 Sep 1999

5340-37-514-3250
Fixed Support

375143250
50140473-02: RNCC: 3 | RNVC: 2
50140473-02: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-37-504-8825
Mounting Bracket

375048825
KDS 2320-1023: RNCC: 2 | RNVC: 1
60379611: RNCC: 5 | RNVC: 9
60379611: RNCC: 5 | RNVC: 9

11 Nov 1997

5340-37-524-3534
Mounting Plate

375243534
KDS 5880-4001: RNCC: 2 | RNVC: 1
A40002863: RNCC: 3 | RNVC: 2
A40002863: RNCC: 5 | RNVC: 2

31 Aug 2012

5340-37-519-7758
Mounting Plate

375197758
85B1564-019: RNCC: 3 | RNVC: 2
85B1564-019: RNCC: 5 | RNVC: 2

19 Jul 2010

5340-37-524-0439
Angle Bracket

375240439
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81140304-02: RNCC: 3 | RNVC: 2
A81140304-02: RNCC: 5 | RNVC: 2
A81140304: RNCC: D | RNVC: 9

8 Aug 2012

5340-37-503-8357
Access Cover

375038357
KDS 1270-1002: RNCC: 2 | RNVC: 1
92011774: RNCC: 5 | RNVC: 9

23 Feb 1996

5340-37-517-4248
Cam Guard Assembly

375174248
61531117: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61531117: RNCC: 5 | RNVC: 2

5 Jun 2009

5340-37-518-4801
Mounting Bracket

375184801
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20010894: RNCC: 3 | RNVC: 2
A20010894: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-516-0855
Angle Bracket

375160855
91029662: RNCC: 3 | RNVC: 2
91029662: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-522-5035
Angle Bracket

375225035
50141016: RNCC: 3 | RNVC: 2
50141016: RNCC: 5 | RNVC: 2

17 Jan 2012

5340-37-520-3108
Access Cover

375203108
A60024159: RNCC: 3 | RNVC: 2
A60024159: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-37-521-1107
Mounting Plate

375211107
A82001351: RNCC: 3 | RNVC: 2
A82001351: RNCC: 5 | RNVC: 2

14 Apr 2011

5340-37-526-6746
Dust And Moisture Seal Protective Cover

375266746
A90027250: RNCC: 3 | RNVC: 2
A90027250: RNCC: 5 | RNVC: 2

20 Aug 2013

5340-37-504-4241
Angle Bracket

375044241
61232685: RNCC: 5 | RNVC: 9
61232685: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-37-512-9448
Dust And Moisture Seal Protective Cover

375129448
Q25022000: RNCC: 3 | RNVC: 2
Q25022000: RNCC: 5 | RNVC: 2

21 Mar 2006

5340-37-516-5196
Swivel Caster

375165196
TP503001PLY TGTLB: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-37-503-1633
Sleeve

375031633
KDS 3805-1024: RNCC: 2 | RNVC: 1
60312638: RNCC: 3 | RNVC: 2

2 Dec 1994

5340-37-525-6660
Mounting Plate

375256660
11.31044-0147: RNCC: 3 | RNVC: 2

26 Feb 2013

5340-37-511-5394
Angle Bracket

375115394
85PF9271-201: RNCC: 3 | RNVC: 2
85PF9271-201: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-37-505-5087
Mounting Bracket

375055087
KDS 1510-4001: RNCC: 2 | RNVC: 1
81263307: RNCC: 3 | RNVC: 2
81263307-01: RNCC: 5 | RNVC: 2

6 Feb 1999

5340-37-522-2014
Angle Bracket Set

375222014
KDS 5895-4031: RNCC: 2 | RNVC: 1
50136640: RNCC: 3 | RNVC: 2
50136640: RNCC: 5 | RNVC: 2

28 Nov 2011

5340-37-504-8827
Mounting Bracket

375048827
KDS 2320-1023: RNCC: 2 | RNVC: 1
60379570: RNCC: 5 | RNVC: 9
60379570: RNCC: 5 | RNVC: 9

11 Nov 1997

5340-37-518-6865
Access Cover

375186865
61523235: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61523235: RNCC: 5 | RNVC: 2

28 Sep 2009

5340-37-504-3992
Reinforcement Plate

375043992
500064736: RNCC: 5 | RNVC: 9
500064736: RNCC: 5 | RNVC: 9

21 Sep 1996

5340-37-522-4874
Lock Bar

375224874
50140065: RNCC: 3 | RNVC: 2
50140065: RNCC: 5 | RNVC: 2

13 Jan 2012

5340-37-511-0024
Synchro Clamp

375110024
Q65066982: RNCC: 3 | RNVC: 2
Q65066982: RNCC: 5 | RNVC: 2

27 Jul 2004

5340-37-505-9843
Mounting Bracket

375059843
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341036: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-37-516-9289
Access Cover

375169289
60825147: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60825147: RNCC: 5 | RNVC: 2

31 Mar 2009

5340-37-518-5952
Mounting Plate

375185952
WF537413-01: RNCC: 3 | RNVC: 2

24 Aug 2009

5340-37-522-7937
Access Cover

375227937
KDC 2010-T4001: RNCC: 2 | RNVC: 1
DSN1140-4607: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-37-504-8520
Mounting Bracket

375048520
KDS 2320-1023: RNCC: 2 | RNVC: 1
60383180: RNCC: 5 | RNVC: 9
60383180: RNCC: 5 | RNVC: 9

3 Nov 1997

5340-37-505-7900
Roller Holder

375057900
KDS 2350-1024: RNCC: 2 | RNVC: 1
60349713: RNCC: 3 | RNVC: 2

7 Jun 1999

5340-37-512-7258
Floorbo Fixed Plate

375127258
Q75011733-3: RNCC: 3 | RNVC: 2
Q75011733-3: RNCC: 5 | RNVC: 2

28 Nov 2005

5340-37-505-7226
Mounting Plate

375057226
KDS 1510-4001: RNCC: 2 | RNVC: 1
81275302: RNCC: 3 | RNVC: 2
81275302-01: RNCC: 5 | RNVC: 2

18 May 1999

5340-37-512-6483
Access Cover

375126483
20143051: RNCC: 3 | RNVC: 2
20143051: RNCC: 5 | RNVC: 2

13 Oct 2005

5340-37-513-0272
Loop Clamp

375130272
80043359: RNCC: 3 | RNVC: 2
80043359: RNCC: 5 | RNVC: 2

2 May 2006

5340-37-520-8397
Bow Handle

375208397
60828403: RNCC: 3 | RNVC: 2
60828403: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-37-518-4846
Mounting Bracket

375184846
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20010423: RNCC: 3 | RNVC: 2
A20010423: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-507-6360
Support

375076360
AA62C-56-2K0A: RNCC: 3 | RNVC: 2

31 Jan 2001

5340-37-518-4943
Access Cover

375184943
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20010676: RNCC: 3 | RNVC: 2
A20010676: RNCC: 5 | RNVC: 2

7 Aug 2009

5340-37-514-0244
Mounting Bracket

375140244
KDS 1005-3001: RNCC: 2 | RNVC: 1
Q55602144: RNCC: 3 | RNVC: 2
Q55602144: RNCC: 5 | RNVC: 2

5 Sep 2007

5340-37-522-2214
Angle Bracket

375222214
KSD 1510-4002: RNCC: 2 | RNVC: 1
85B5581-529: RNCC: 3 | RNVC: 2
85B5581-529: RNCC: 5 | RNVC: 2

28 Nov 2011

5340-37-519-0007
Access Cover

375190007
20030637: RNCC: 3 | RNVC: 2
20030637: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1

9 Dec 2009

5340-37-518-7868
Catch Strike

375187868
60815726: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60815726: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-519-7971
Block Clamp

375197971
Q55606958: RNCC: 5 | RNVC: 2
Q55606958: RNCC: D | RNVC: 9

5 Aug 2010

5340-37-505-7219
Mounting Plate

375057219
KDS 1510-4001: RNCC: 2 | RNVC: 1
81275341: RNCC: 3 | RNVC: 2
81275341-01: RNCC: 5 | RNVC: 2

18 May 1999

5340-37-506-5934
Loop Clamp

375065934
Q75012053: RNCC: 3 | RNVC: 2

2 Nov 1999

5340-37-514-5382
Mounting Bracket

375145382
50138831: RNCC: 3 | RNVC: 2
50138831: RNCC: 5 | RNVC: 2

18 Dec 2007

5340-37-520-2820
Mounting Plate

375202820
10301.6514.003: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-37-519-8369
Mounting Plate

375198369
A20011615: RNCC: 3 | RNVC: 2
A20011615: RNCC: 5 | RNVC: 2

16 Aug 2010

5340-37-523-8785
Mounting Bracket

375238785
61530103: RNCC: 3 | RNVC: 2

26 Jul 2012

5340-37-504-4194
Lef Connector Plate

375044194
60064966: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-37-556-4677
Tube Clamp

375564677
60560063: RNCC: 3 | RNVC: 2
KM3009437: RNCC: 5 | RNVC: 1

30 Mar 2004

5340-37-515-9432
Mounting Bracket

375159432
A40002815: RNCC: 3 | RNVC: 2
A40002815: RNCC: 5 | RNVC: 2

17 Oct 2008

5340-37-505-6573
Rod End Clevis

375056573
KDS 2350-1024: RNCC: 2 | RNVC: 1
60359766: RNCC: 3 | RNVC: 2

26 Apr 1999

5340-37-506-0181
Mounting Bracket

375060181
KDS 1510-4001: RNCC: 2 | RNVC: 1
81347305: RNCC: 3 | RNVC: 2
81347305-01: RNCC: 5 | RNVC: 2

26 Jul 1999

5340-37-526-3018
Access Cover

375263018
3M-158085: RNCC: 3 | RNVC: 2
3M-158085-T04: RNCC: 5 | RNVC: 2

1 Jul 2013

5340-37-526-8734
Mounting Plate

375268734
464000-30063000-18: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-37-512-2320
Angle Bracket

375122320
85H5532-023: RNCC: 3 | RNVC: 2
85H5532-023: RNCC: 5 | RNVC: 2

6 Jul 2005

5340-37-501-2026
Angle Bracket

375012026
KDC2350-P0003-6: RNCC: 2 | RNVC: 1
60704462: RNCC: 3 | RNVC: 2
60704462: RNCC: 5 | RNVC: 2

22 Dec 1988

5340-37-507-8552
Mounting Bracket

375078552
80260025: RNCC: 3 | RNVC: 2
80260025: RNCC: 5 | RNVC: 2

8 Jun 2001

5340-37-526-2847
Butt Hinge Leaf

375262847
81091776: RNCC: 3 | RNVC: 2
81091776: RNCC: 5 | RNVC: 2

25 Jun 2013

5340-37-502-1485
Dust And Moisture Seal Protective Plug

375021485
60642278: RNCC: 5 | RNVC: 9

17 Feb 1992

5340-37-520-9445
Clamping Catch

375209445
60034531: RNCC: 3 | RNVC: 2
60034531: RNCC: 5 | RNVC: 2

8 Mar 2011

5340-37-514-9751
Mounting Plate

375149751
50140544: RNCC: 3 | RNVC: 2
50140544: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-37-509-7989
Access Cover

375097989
Q55109089: RNCC: 3 | RNVC: 2
Q55109089: RNCC: 3 | RNVC: 2

3 Jun 2003

5340-37-509-6850
Mounting Bracket

375096850
Q55024137: RNCC: 3 | RNVC: 2
Q55024137: RNCC: 3 | RNVC: 2

18 Apr 2003

5340-37-511-1285
Angle Bracket

375111285
Q55606244: RNCC: 3 | RNVC: 2
Q55606244: RNCC: 5 | RNVC: 2

28 Aug 2004

5340-37-512-8670
Cushioning Pad

375128670
Q25024204: RNCC: 3 | RNVC: 2
Q25024204: RNCC: 5 | RNVC: 2

27 Feb 2006

5340-37-522-0106
Double Angle Bracket

375220106
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81035327: RNCC: 3 | RNVC: 2
A81035327-01: RNCC: 3 | RNVC: 2
A81035327-01: RNCC: 5 | RNVC: 2

1 Nov 2011

5340-37-506-0328
Mounting Plate

375060328
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341352: RNCC: 3 | RNVC: 2

30 Jul 1999

5340-37-513-5929
Loop Clamp

375135929
KDS 2320-4002: RNCC: 2 | RNVC: 1
A60014717: RNCC: 3 | RNVC: 2
A60014717: RNCC: 5 | RNVC: 2

8 Apr 2007

5340-37-514-5325
Mounting Bracket

375145325
50138825: RNCC: 3 | RNVC: 2
50138825: RNCC: 5 | RNVC: 2

17 Dec 2007

5340-37-518-8056
Access Cover

375188056
80047564: RNCC: 3 | RNVC: 2
80047564: RNCC: 5 | RNVC: 2

9 Nov 2009

5340-37-514-4422
Mounting Bracket

375144422
50134121: RNCC: 3 | RNVC: 2
50134121: RNCC: 5 | RNVC: 2

4 Dec 2007

5340-37-510-3589
Cushioning Pad

375103589
81046703: RNCC: 3 | RNVC: 1
81046703-02: RNCC: 5 | RNVC: 9

16 Jan 2004

5340-37-511-5397
Angle Bracket

375115397
85PF9303-201: RNCC: 3 | RNVC: 2
85PF9303-201: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-37-521-9315
Mounting Bracket

375219315
KDS 2350-4003: RNCC: 2 | RNVC: 1
61516030: RNCC: 3 | RNVC: 2
61516030: RNCC: 5 | RNVC: 2

26 Sep 2011

5340-37-518-4242
Mounting Bracket

375184242
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20011154: RNCC: 3 | RNVC: 2
A20011154: RNCC: 5 | RNVC: 2

29 Jul 2009

5340-37-516-3366
Hinged Hasp

375163366
60818047: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60818047: RNCC: 5 | RNVC: 2

12 Nov 2008

5340-37-505-6599
Rod Arm

375056599
KDS 2350-1024: RNCC: 2 | RNVC: 1
60360257: RNCC: 3 | RNVC: 2

28 Apr 1999

5340-37-523-0621
Mounting Bracket

375230621
65.11210-0004A: RNCC: 3 | RNVC: 2
83026219: RNCC: D | RNVC: 9

18 Apr 2012

5340-37-517-9847
Mounting Bracket

375179847
60826080: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826080: RNCC: 5 | RNVC: 2

2 Jul 2009

5340-37-504-8910
Angle Bracket

375048910
KDS 2320-1023: RNCC: 2 | RNVC: 1
60382939: RNCC: 5 | RNVC: 9
60382939: RNCC: 5 | RNVC: 9

12 Nov 1997

5340-37-512-2518
Angle Bracket

375122518
85K1106-003: RNCC: 3 | RNVC: 2
85K1106-003: RNCC: 3 | RNVC: 2

12 Jul 2005

5340-37-511-6158
Angle Bracket

375116158
85Y1191-065: RNCC: 3 | RNVC: 2
85Y1191-065: RNCC: 5 | RNVC: 2

3 Mar 2005

5340-37-506-6493
Headless Straight Rod

375066493
Q75012549: RNCC: 3 | RNVC: 2

10 Nov 1999

5340-37-507-1429
Cover

375071429
20112083: RNCC: 5 | RNVC: 9

8 Jun 2000

5340-37-555-5288
Key

375555288
NLG-12-3: RNCC: 5 | RNVC: 1

22 Mar 2004

5340-37-522-2038
Mounting Plate

375222038
KDS 5895-4031: RNCC: 2 | RNVC: 1
50136750: RNCC: 3 | RNVC: 2
50136750: RNCC: 5 | RNVC: 2

28 Nov 2011

5340-37-516-2522
Mounting Plate

375162522
S30 4505 O: RNCC: 3 | RNVC: 2

6 Nov 2008

5340-37-004-1093
Ladder

370041093
4230-500-0000433: RNCC: 3 | RNVC: 2

10 Aug 2001

5340-37-514-3740
Threaded Rod End

375143740
10301.7527.031: RNCC: 3 | RNVC: 2

26 Nov 2007

5340-37-525-1356
Mounting Bracket

375251356
A40003321: RNCC: 3 | RNVC: 2
A40003321: RNCC: 5 | RNVC: 2

7 Jan 2013

5340-37-514-9802
Right Side Panel

375149802
50145807: RNCC: 3 | RNVC: 2
50145807: RNCC: 5 | RNVC: 2

7 Apr 2008

5340-37-518-0829
Butt Hinge Leaf

375180829
60825035: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60825035: RNCC: 5 | RNVC: 2

9 Jul 2009

5340-37-078-0162

5340-37-033-0939

5340-37-015-5543

5340-37-516-3201
Mounting Plate

375163201
83030938: RNCC: 3 | RNVC: 2
83030938: RNCC: 5 | RNVC: 2

12 Nov 2008

5340-37-524-8266
Metal Dome For Func

375248266
7300044000010: RNCC: 3 | RNVC: 2

6 Nov 2012

5340-37-523-4918
Dust And Moisture Seal Protective Plug

375234918
A60079746: RNCC: 3 | RNVC: 2
A60079746: RNCC: 5 | RNVC: 2

19 Jun 2012

5340-37-510-3702
Stopper

375103702
Q65050720: RNCC: 3 | RNVC: 2

29 Jan 2004

5340-37-523-8628
Access Cover

375238628
A60079393: RNCC: 3 | RNVC: 2
A60079393: RNCC: 5 | RNVC: 2

24 Jul 2012

5340-37-515-7728
Mounting Plate

375157728
83014848: RNCC: 3 | RNVC: 2
83014848: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-512-8082
Link

375128082
Q25027066: RNCC: 3 | RNVC: 2
Q25027066: RNCC: 5 | RNVC: 2

6 Feb 2006

5340-37-508-8687
Retaining Band

375088687
Q65031310: RNCC: 3 | RNVC: 2
Q65031310: RNCC: 3 | RNVC: 2

26 Apr 2002

5340-37-526-0291
Mount Block

375260291
91040387: RNCC: 3 | RNVC: 2
91040387: RNCC: 5 | RNVC: 2

15 Apr 2013

5340-37-518-0500
Mounting Plate

375180500
60826130: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826130: RNCC: 5 | RNVC: 2

6 Jul 2009

5340-37-520-8679
Bow Handle

375208679
HA6-01-25-60: RNCC: 3 | RNVC: 2

22 Feb 2011

5340-37-502-6133
Section Block Clamp

375026133
60057751: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-37-525-6735
Angle Bracket

375256735
KDS 1210-4005: RNCC: 2 | RNVC: 1
A90015530: RNCC: 3 | RNVC: 2
A90015530: RNCC: 5 | RNVC: 2

26 Feb 2013

5340-37-507-8698
Block Clamp

375078698
KDS 1550-3002: RNCC: 2 | RNVC: 1
80261958: RNCC: 3 | RNVC: 2
80261958: RNCC: 5 | RNVC: 2

22 Jun 2001

5340-37-512-5383
Vertical Guide

375125383
FTC-85GA8332-011: RNCC: 3 | RNVC: 2
85VG8332-003: RNCC: 5 | RNVC: 1
FTC-85GA8332-011: RNCC: 5 | RNVC: 2

6 Sep 2005

5340-37-518-5682
Mounting Plate

375185682
WF392326-01: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-37-514-2633
Top Cover Assembly

375142633
50130099: RNCC: 3 | RNVC: 2
50130099: RNCC: 5 | RNVC: 2

9 Nov 2007

5340-37-508-6585
Mounting Plate

375086585
Q65047936: RNCC: 3 | RNVC: 2
Q65047936: RNCC: 5 | RNVC: 2

5 Mar 2002

5340-37-511-3460
Mounting Bracket

375113460
40017120: RNCC: 3 | RNVC: 2
40017120: RNCC: 5 | RNVC: 2

11 Nov 2004

5340-37-555-0056
Section Block Clamp

375550056
60746111: RNCC: 3 | RNVC: 2
60746111: RNCC: 5 | RNVC: 2

15 Mar 1995

5340-37-519-0823
Sliding Door Track

375190823
61503443: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61503443: RNCC: 5 | RNVC: 2

22 Dec 2009

5340-37-556-5071
Turbine Plate

375565071
154-13-41180: RNCC: 5 | RNVC: 1

31 Mar 2004

5340-37-502-8719
Access Cover

375028719
60308752: RNCC: 3 | RNVC: 2

29 Sep 1994

5340-37-502-7871
Block Clamp

375027871
60086246: RNCC: 3 | RNVC: 2

13 Jul 1994

5340-37-526-9537
Retaining Strap

375269537
60816351-1: RNCC: 3 | RNVC: 2
60816351-1: RNCC: 5 | RNVC: 2
60816351: RNCC: D | RNVC: 9

17 Sep 2013

5340-37-509-4234
Mounting Bracket

375094234
Q55022318: RNCC: 3 | RNVC: 2
Q55022318: RNCC: 3 | RNVC: 2
Q55022318: RNCC: 3 | RNVC: 9

16 Dec 2002

5340-37-522-9458
Mounting Plate

375229458
50139962: RNCC: 3 | RNVC: 2
50139962: RNCC: 5 | RNVC: 2

3 Apr 2012

5340-37-523-8906
Beam Gripping Clamp

375238906
60560384: RNCC: 3 | RNVC: 2
60560384: RNCC: 5 | RNVC: 2

26 Jul 2012

5340-37-526-9813
Resilient Mount Plate

375269813
61482302-2: RNCC: 3 | RNVC: 2
61482302-2: RNCC: 5 | RNVC: 2
61482302: RNCC: D | RNVC: 9

26 Sep 2013

5340-37-555-1332
Bottom Hook With Ho

375551332
DH 0.5-22: RNCC: 5 | RNVC: 1

18 Mar 2004

5340-37-526-8733
Mounting Plate

375268733
464000-30063000-19: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-37-523-2977
Foot Bolt

375232977
C-1625-4: RNCC: 3 | RNVC: 2

25 May 2012

5340-37-522-2721
Mechanical Stop

375222721
KDS 2350-4003: RNCC: 2 | RNVC: 1
61507244: RNCC: 3 | RNVC: 2
61507244: RNCC: 5 | RNVC: 2

6 Dec 2011

5340-37-513-3933
Dus Protective Plug

375133933
219-14-1553: RNCC: 3 | RNVC: 2

17 Jan 2007

5340-37-511-3894
Angle Bracket

375113894
Q65068118: RNCC: 3 | RNVC: 2
Q65068118-2-C: RNCC: 5 | RNVC: 2

3 Dec 2004

5340-37-511-5878
Angle Bracket

375115878
85PF9310-211: RNCC: 3 | RNVC: 2
85PF9310-211: RNCC: 5 | RNVC: 2

21 Feb 2005

5340-37-518-5365
Mounting Plate

375185365
WF392120-01: RNCC: 3 | RNVC: 2

15 Aug 2009

5340-37-503-5447
Multiple Angle Bracket

375035447
60745486: RNCC: 3 | RNVC: 2
60745486: RNCC: 5 | RNVC: 2

16 Oct 1995

5340-37-521-6681
Mounting Bracket

375216681
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81029301: RNCC: 3 | RNVC: 2
A81029301-01: RNCC: 5 | RNVC: 2

28 Jul 2011

5340-37-524-3327
Mounting Bracket

375243327
KDS584530111: RNCC: 2 | RNVC: 1
A50038949: RNCC: 3 | RNVC: 2
A50038949: RNCC: 5 | RNVC: 2

29 Aug 2012

5340-37-519-1213
Mechanical Stop

375191213
81321407-01: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-520-5905
Strap Fastener Loop

375205905
60125160-C: RNCC: 3 | RNVC: 2
60125160-C: RNCC: 5 | RNVC: 2

17 Dec 2010

5340-37-519-4853
Mounting Bracket

375194853
81361874: RNCC: 3 | RNVC: 2
81361874: RNCC: 5 | RNVC: 2

4 May 2010

5340-37-522-7941
Access Cover

375227941
KDC 2010-T4001: RNCC: 2 | RNVC: 1
DSN1140-4704: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-37-521-8613
Block Clamp

375218613
KDS 2350-4003: RNCC: 2 | RNVC: 1
61530662: RNCC: 3 | RNVC: 2
61530662: RNCC: 5 | RNVC: 2

19 Sep 2011

5340-37-518-5902
Cushioning Pad

375185902
60445460-2: RNCC: 3 | RNVC: 2
60445460: RNCC: 5 | RNVC: 1
60445460-2: RNCC: 5 | RNVC: 2

21 Aug 2009

5340-37-521-9088
Mounting Bracket

375219088
KDS 1240-4012: RNCC: 2 | RNVC: 1
A40011853: RNCC: 3 | RNVC: 2
A40011853: RNCC: 5 | RNVC: 2

22 Sep 2011

5340-37-501-3163

5340-37-509-2770

5340-37-520-3902
Luggage Handle

375203902
AD81000004: RNCC: 3 | RNVC: 2
AD81000004: RNCC: 5 | RNVC: 2

3 Dec 2010

5340-37-525-0629
Turnbuckle

375250629
91014262: RNCC: 3 | RNVC: 2
91014262: RNCC: 5 | RNVC: 2

20 Dec 2012

5340-37-508-1953
Mounting Bracket

375081953
80267379: RNCC: 3 | RNVC: 2
80267379: RNCC: 5 | RNVC: 2

6 Nov 2001

5340-37-510-0104
Angle Bracket

375100104
82331306: RNCC: 3 | RNVC: 2
82331306-01: RNCC: 5 | RNVC: 2

21 Aug 2003

5340-37-005-1535
Flange;Wheel

370051535
KDC 3805-P0007: RNCC: 2 | RNVC: 1
5340-97-005-1535: RNCC: 2 | RNVC: 2
73024126: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-512-3441
Mounting Bracket

375123441
85D1262-075: RNCC: 3 | RNVC: 2
85D1262-075: RNCC: 5 | RNVC: 2

28 Jul 2005

5340-37-518-4198
Mounting Plate

375184198
A20010927: RNCC: 3 | RNVC: 2
A20010927: RNCC: 5 | RNVC: 2

29 Jul 2009

5340-37-523-4800
Mounting Plate

375234800
1682326-7.1: RNCC: 3 | RNVC: 2

18 Jun 2012

5340-37-506-4090
Manual Control Handle

375064090
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341295: RNCC: 3 | RNVC: 2

6 Sep 1999

5340-37-518-0707
Floor Support

375180707
60824993: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60824993: RNCC: 5 | RNVC: 2

8 Jul 2009

5340-37-524-5335
Mounting Plate

375245335
60835078: RNCC: 3 | RNVC: 2

25 Sep 2012

5340-37-525-1997
Mounting Plate

375251997
91046641: RNCC: 3 | RNVC: 2
91046641: RNCC: 5 | RNVC: 2

10 Jan 2013

5340-37-524-1118
Angle Bracket

375241118
D60818122: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-37-524-7920
Mounting Bracket

375247920
60826086: RNCC: 3 | RNVC: 2
60826086: RNCC: 5 | RNVC: 2

30 Oct 2012

5340-37-526-1526
Mounting Plate

375261526
91026907: RNCC: 3 | RNVC: 2
91026907: RNCC: 5 | RNVC: 2

30 May 2013

5340-37-524-8212
Mounting Bracket

375248212
61528954: RNCC: 3 | RNVC: 2

6 Nov 2012

5340-37-525-1335
Mounting Bracket

375251335
A40003261: RNCC: 3 | RNVC: 2
A40003261: RNCC: 5 | RNVC: 2

7 Jan 2013

5340-37-519-4727
Seal Retaining Plate

375194727
06010249: RNCC: 3 | RNVC: 2

27 Apr 2010

5340-37-519-3782
Hand Crank

375193782
A20007297: RNCC: 3 | RNVC: 2
A20007297: RNCC: 5 | RNVC: 2

24 Mar 2010

5340-37-519-2022
Mounting Bracket

375192022
81362859: RNCC: 3 | RNVC: 2
81362859: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-37-510-8387
Spring Tension Clip

375108387
Q65067896: RNCC: 3 | RNVC: 2
Q65067896: RNCC: 3 | RNVC: 2

3 Jul 2004

5340-37-513-1201
Access Cover

375131201
Q55028893: RNCC: 3 | RNVC: 2
Q55028893: RNCC: 5 | RNVC: 2

18 Jul 2006

5340-37-526-5705
Mounting Bracket

375265705
61519782: RNCC: 3 | RNVC: 2
61519782: RNCC: 5 | RNVC: 2

2 Aug 2013

5340-37-523-8635
Stand Base

375238635
A60079402: RNCC: 3 | RNVC: 2
A60079402: RNCC: 5 | RNVC: 2

24 Jul 2012

5340-37-502-7854
Cover Plate

375027854
60086940: RNCC: 3 | RNVC: 2

13 Jul 1994

5340-37-502-0432
Double Angle Bracket

375020432
60734208: RNCC: 3 | RNVC: 2
60734208: RNCC: 5 | RNVC: 2

22 Oct 1991

5340-37-511-8195
Mounting Plate

375118195
Q55111717: RNCC: 3 | RNVC: 2
Q55111717: RNCC: 5 | RNVC: 2

8 Apr 2005

5340-37-522-8809
Angle Bracket

375228809
50139734: RNCC: 3 | RNVC: 2
50139734: RNCC: 5 | RNVC: 2

23 Mar 2012

5340-37-506-6601
Loop Clamp

375066601
80045926: RNCC: 3 | RNVC: 2

16 Nov 1999

5340-37-507-3662
Km9a Clamp Assembly

375073662
30013683: RNCC: 3 | RNVC: 2

18 Sep 2000

5340-37-517-6073
Kit

375176073
020050-051: RNCC: 5 | RNVC: 1

22 Jun 2009

5340-37-522-9021
Access Door Hinge

375229021
60307392-3: RNCC: 3 | RNVC: 2
60307392-3: RNCC: 5 | RNVC: 2
60307392: RNCC: D | RNVC: 9

30 Mar 2012

5340-37-520-6621
Mounting Plate

375206621
KDS 1005-1389: RNCC: 2 | RNVC: 1
Q55607017: RNCC: 3 | RNVC: 2
Q55607017: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-519-6625
Mounting Plate

375196625
A20012555: RNCC: 3 | RNVC: 2
A20012555: RNCC: 5 | RNVC: 2

24 Jun 2010

5340-37-521-2913
Access Cover

375212913
KDS4230-4001: RNCC: 2 | RNVC: 1
Q75013116: RNCC: 3 | RNVC: 2
Q75013116: RNCC: 5 | RNVC: 2

12 May 2011

5340-37-507-3051
Link

375073051
KDS 3950-3002: RNCC: 2 | RNVC: 1
95005776: RNCC: 3 | RNVC: 2
95005776: RNCC: 5 | RNVC: 2

28 Aug 2000

5340-37-518-4516
Mounting Bracket

375184516
WF533323-01: RNCC: 3 | RNVC: 2

3 Aug 2009

5340-37-524-2032
Dust And Moisture Seal Protective Cover

375242032
KDS 5855-4012: RNCC: 2 | RNVC: 1
A40007035: RNCC: 3 | RNVC: 2
A40007035: RNCC: 5 | RNVC: 2

20 Aug 2012

5340-37-502-8681
Retaining Clip

375028681
KM-2350-1015: RNCC: 2 | RNVC: 2
60308486: RNCC: 3 | RNVC: 2

31 Jan 1997

5340-37-506-0326
Rubber Bumper

375060326
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341347: RNCC: 3 | RNVC: 2
KDS 2350-3486: RNCC: 4 | RNVC: 1

30 Jul 1999

5340-37-523-3474
Access Cover

375233474
KDC 2010-T4001: RNCC: 2 | RNVC: 1
DSN1080-4506: RNCC: 3 | RNVC: 2

31 May 2012

5340-37-520-2855
Lock Bolt

375202855
KDC 0001-P4001: RNCC: 2 | RNVC: 1
AD71000218: RNCC: 3 | RNVC: 2
KDS6910-4003: RNCC: 4 | RNVC: 1
AD71000218: RNCC: 5 | RNVC: 2

15 Nov 2010

5340-37-512-3557
Mounting Bracket

375123557
Q55028095: RNCC: 3 | RNVC: 2
Q55028095: RNCC: 5 | RNVC: 2

28 Jul 2005

5340-37-521-8477
Mounting Bracket

375218477
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81061432: RNCC: 3 | RNVC: 2
A81061432-01: RNCC: 5 | RNVC: 2

19 Sep 2011

5340-37-518-0547
Mounting Bracket

375180547
WF324301-01: RNCC: 3 | RNVC: 2

7 Jul 2009

5340-37-519-9380
Mounting Bracket

375199380
85PF9420-801: RNCC: 3 | RNVC: 2
85PF9420-801: RNCC: 5 | RNVC: 2

31 Aug 2010

5340-37-519-0649
Lock Detent

375190649
10301.0750.103.001: RNCC: 3 | RNVC: 2

15 Dec 2009

5340-37-502-5047
Access Cover

375025047
60073441: RNCC: 3 | RNVC: 2

18 Oct 1993

5340-37-505-5893
Double Angle Bracket

375055893
Q55016319: RNCC: 3 | RNVC: 2

24 Mar 1999

5340-37-516-3200
Mounting Plate

375163200
83030937: RNCC: 3 | RNVC: 2
83030937: RNCC: 5 | RNVC: 2

12 Nov 2008

5340-37-511-5881
Multiple Angle Bracket

375115881
85PF9306-201: RNCC: 3 | RNVC: 2
85PF9306-201: RNCC: 5 | RNVC: 2

21 Feb 2005

5340-37-521-6643
Mounting Bracket

375216643
KDS1510-4002: RNCC: 2 | RNVC: 1
85S5530-331: RNCC: 3 | RNVC: 2
85S5530-331: RNCC: 5 | RNVC: 2

27 Jul 2011

5340-37-517-9835
Draw Latch

375179835
60822035: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60822035: RNCC: 5 | RNVC: 2

2 Jul 2009

5340-37-507-1035
Cylinder Bracket

375071035
KDS 2350-1024: RNCC: 2 | RNVC: 1
60356861: RNCC: 3 | RNVC: 2
553 098 01 53: RNCC: 5 | RNVC: 2

17 May 2000

5340-37-503-7905
Angle Bracket

375037905
KDS 1270-1002: RNCC: 2 | RNVC: 1
92011497: RNCC: 5 | RNVC: 9

13 Feb 1996

5340-37-506-1823
Cover

375061823
KDS 2350-1024: RNCC: 2 | RNVC: 1
60340051: RNCC: 3 | RNVC: 2

14 Aug 1999

5340-37-512-5983
Bow Handle

375125983
50127015-02: RNCC: 3 | RNVC: 2
50127015: RNCC: 5 | RNVC: 1
50127015-02: RNCC: 5 | RNVC: 2

25 Sep 2005

5340-37-114-4272
Band

371144272
5340-97-114-4272: RNCC: 2 | RNVC: 2
997090255: RNCC: 3 | RNVC: 2
997090255: RNCC: 3 | RNVC: 2
KDS 2320-1005: RNCC: 4 | RNVC: 1

23 Nov 1987

5340-37-523-6086
Lever Bracket

375236086
KDS 2350-4003: RNCC: 2 | RNVC: 1
61503519: RNCC: 3 | RNVC: 2
61503519: RNCC: 5 | RNVC: 2

4 Jul 2012

5340-37-556-5152
Cover

375565152
5560-01390: RNCC: 5 | RNVC: 1

31 Mar 2004

5340-37-521-8614
Block Clamp

375218614
KDS 2350-4003: RNCC: 2 | RNVC: 1
61530663: RNCC: 3 | RNVC: 2
61530663: RNCC: 5 | RNVC: 2

19 Sep 2011

5340-37-502-3624
Mounting Bracket

375023624
KDS 2350-1024: RNCC: 2 | RNVC: 1
60300011: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-37-520-0436
Mounting Plate

375200436
KDS-1015-4003: RNCC: 2 | RNVC: 2
A20013365: RNCC: 3 | RNVC: 2
A20013365: RNCC: 5 | RNVC: 2

27 Sep 2010

5340-37-512-0840
Console Base Cover

375120840
20143712: RNCC: 3 | RNVC: 2
20143712: RNCC: 5 | RNVC: 2

9 Jun 2005

5340-37-501-0593
Mounting Bracket

375010593
KDS 2350-1008: RNCC: 4 | RNVC: 1
60606308: RNCC: 5 | RNVC: 9

5 Oct 1989

5340-37-501-6066
Manual Control Handle

375016066
60734037: RNCC: 3 | RNVC: 2
60734037: RNCC: 5 | RNVC: 2

16 May 1990

5340-37-501-5490
Lifting Eye

375015490
60773409: RNCC: 3 | RNVC: 2
871 220 00 41: RNCC: 5 | RNVC: 2
60773409: RNCC: 5 | RNVC: 2

26 Mar 1990

5340-37-516-1390
Nut And Bolt Head Protective Cap

375161390
60822409: RNCC: 3 | RNVC: 2
60822409: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1

29 Oct 2008

5340-37-520-3596
Extension Drawer Slide Section

375203596
50156301: RNCC: 3 | RNVC: 2
50156301: RNCC: 5 | RNVC: 2

26 Nov 2010

5340-37-522-7276
Locking Stay

375227276
KDS2350-4005: RNCC: 2 | RNVC: 1
A60073354: RNCC: 3 | RNVC: 2
A60073354: RNCC: 5 | RNVC: 2

22 Feb 2012

5340-37-140-0447
Spacer

371400447
5340-97-140-0447: RNCC: 2 | RNVC: 2
70008789: RNCC: 3 | RNVC: 2
KDS 1055-1005: RNCC: 4 | RNVC: 1

23 Nov 1987

5340-37-521-2662
Access Cover

375212662
KDS 2350-4003: RNCC: 2 | RNVC: 1
61523340: RNCC: 3 | RNVC: 2
61523340: RNCC: 5 | RNVC: 2

6 May 2011

5340-37-507-0085
Cushioning Pad

375070085
KDS 2350-1024: RNCC: 2 | RNVC: 1
60340035: RNCC: 3 | RNVC: 2

20 Mar 2000

5340-37-517-4246
Cushioning Pad

375174246
61531119: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61531119: RNCC: 5 | RNVC: 2

5 Jun 2009

5340-37-503-4633
Bracket Assembly

375034633
60621478: RNCC: 5 | RNVC: 9

2 Aug 1995

5340-37-522-0021
Angle Bracket

375220021
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81005392: RNCC: 3 | RNVC: 2
A81005392-01: RNCC: 3 | RNVC: 2
A81005392-01: RNCC: 5 | RNVC: 2

1 Nov 2011

5340-37-526-0355
Access Cover

375260355
CSP-EHC125C-102-1: RNCC: 3 | RNVC: 2
EHC125C-102.1: RNCC: 5 | RNVC: 2

17 Apr 2013

5340-37-512-1674
Access Cover

375121674
85B6236-053: RNCC: 3 | RNVC: 2
85B6236-053: RNCC: 5 | RNVC: 2

24 Jun 2005

5340-37-507-2990
Float Unit Float

375072990
KDS 1080-3001: RNCC: 2 | RNVC: 1
95007135: RNCC: 5 | RNVC: 9
95007135: RNCC: 5 | RNVC: 9

25 Aug 2000

5340-37-518-6904
Double Angle Bracket

375186904
61525863: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61525863: RNCC: 5 | RNVC: 2

28 Sep 2009

5340-37-511-0919
Lift Strap Assembly

375110919
Q65079420: RNCC: 3 | RNVC: 2
Q65079420: RNCC: 5 | RNVC: 2

20 Aug 2004

5340-37-514-8882
Mounting Bracket

375148882
50139289: RNCC: 3 | RNVC: 2
50139289: RNCC: 5 | RNVC: 2

21 Mar 2008

5340-37-526-9298
Mounting Plate

375269298
A90028384: RNCC: 3 | RNVC: 2
A90028384: RNCC: 5 | RNVC: 2

13 Sep 2013

5340-37-525-7987
Headless Straight Rod

375257987
95014438: RNCC: 3 | RNVC: 2
95014438: RNCC: 5 | RNVC: 2

17 Mar 2013

5340-37-526-1921
Mounting Plate

375261921
91026903-02: RNCC: 3 | RNVC: 2
91026903-02: RNCC: 5 | RNVC: 2
91026903: RNCC: D | RNVC: 9

7 Jun 2013

5340-37-511-5876
Angle Bracket

375115876
85PF9305-211: RNCC: 3 | RNVC: 2
85PF9305-211: RNCC: 5 | RNVC: 2

21 Feb 2005

5340-37-518-4931
Mounting Plate

375184931
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20010658: RNCC: 3 | RNVC: 2
A20010658: RNCC: 5 | RNVC: 2

7 Aug 2009

5340-37-512-8667
Rod End Connector

375128667
Q25022748: RNCC: 3 | RNVC: 2
Q25022748: RNCC: 5 | RNVC: 2

27 Feb 2006

5340-37-505-8029
Mounting Bracket

375058029
KDS 2350-1024: RNCC: 2 | RNVC: 1
60348026: RNCC: 3 | RNVC: 2

11 Jun 1999

5340-37-512-2751
Mounting Plate

375122751
85E6760-073: RNCC: 3 | RNVC: 2
85E6760-073: RNCC: 3 | RNVC: 2

14 Jul 2005

5340-37-510-7867
Retaining Strap

375107867
60574724: RNCC: 3 | RNVC: 2
60574724-2: RNCC: 3 | RNVC: 2
60574724: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-37-555-0113
Section Block Clamp

375550113
60745145: RNCC: 3 | RNVC: 2
60745145: RNCC: 5 | RNVC: 2

16 Mar 1995

5340-37-500-3075
Access Cover

375003075
60639082: RNCC: 5 | RNVC: 9

26 Jun 1989

5340-37-504-3808
Bracket

375043808
50096022: RNCC: 5 | RNVC: 9

15 Sep 1996

5340-37-512-5394
Spring Shaft

375125394
FTC-85GA8339-033: RNCC: 3 | RNVC: 2
85VG8339-003: RNCC: 5 | RNVC: 1
FTC-85GA8339-033: RNCC: 5 | RNVC: 2

6 Sep 2005

5340-37-521-9320
Mounting Bracket

375219320
KDS 2350-4003: RNCC: 2 | RNVC: 1
61518302: RNCC: 3 | RNVC: 2
61518302: RNCC: 5 | RNVC: 2

26 Sep 2011

5340-37-511-5887
Multiple Angle Bracket

375115887
85PF9372-201: RNCC: 3 | RNVC: 2
85PF9372-201: RNCC: 5 | RNVC: 2

21 Feb 2005

5340-37-522-4019
Dust And Moisture Seal Protective Plug

375224019
35-94570-2103: RNCC: 3 | RNVC: 2

27 Dec 2011

5340-37-506-0183
Butt Hinge

375060183
KDS 1510-4001: RNCC: 2 | RNVC: 1
81531422: RNCC: 3 | RNVC: 2
81531422-01: RNCC: 5 | RNVC: 2

26 Jul 1999

5340-37-504-8986
Rod Holder

375048986
KDS 2320-1023: RNCC: 2 | RNVC: 1
60382581: RNCC: 5 | RNVC: 9
60382581: RNCC: 5 | RNVC: 9

14 Nov 1997

5340-37-506-2732
Mounting Bracket

375062732
KDS 2350-1024: RNCC: 2 | RNVC: 1
60342582: RNCC: 3 | RNVC: 2

18 Aug 1999

5340-37-518-6306
Mounting Bracket

375186306
60822638: RNCC: 3 | RNVC: 2
KDS 1240-4004: RNCC: 4 | RNVC: 1
60822638: RNCC: 5 | RNVC: 2

31 Aug 2009

5340-37-512-2539
Access Door Hinge

375122539
85B6873-053: RNCC: 3 | RNVC: 2
85B6873-053: RNCC: 5 | RNVC: 2

12 Jul 2005

5340-37-518-5685
Angle Bracket

375185685
WF392330-02: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-37-522-7357
Angle Bracket

375227357
KDS2350-4005: RNCC: 2 | RNVC: 1
A60073825: RNCC: 3 | RNVC: 2
A60073825: RNCC: 5 | RNVC: 2

22 Feb 2012

5340-37-525-0455
Mounting Bracket

375250455
KDS 5855-4012: RNCC: 2 | RNVC: 1
A40008741: RNCC: 3 | RNVC: 2
A40008741: RNCC: 5 | RNVC: 2

17 Dec 2012

5340-37-502-9907
Mount Assembly

375029907
60311603: RNCC: 3 | RNVC: 2

28 Oct 1994

5340-37-519-2791
Mounting Bracket

375192791
81364271: RNCC: 3 | RNVC: 2
81364271: RNCC: 5 | RNVC: 2

5 Mar 2010

5340-37-509-4168
Mounting Plate

375094168
KDS 2350-1008: RNCC: 2 | RNVC: 1
60653018: RNCC: 3 | RNVC: 2
60653018: RNCC: 3 | RNVC: 2
2520-37-A13-5555: RNCC: 5 | RNVC: 2

7 Dec 2002

5340-37-518-6864
Access Cover

375186864
61523231: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61523231: RNCC: 5 | RNVC: 2

28 Sep 2009

5340-37-524-4476
Mounting Bracket

375244476
KHD-1100: RNCC: 3 | RNVC: 2

12 Sep 2012

5340-37-518-7255
Shimmy Damper

375187255
5404-1710-20: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-37-514-2101
Mounting Plate

375142101
A90008043: RNCC: 3 | RNVC: 2
A90008043: RNCC: 5 | RNVC: 2

30 Oct 2007

5340-37-523-4748
Mounting Bracket

375234748
A60078425: RNCC: 3 | RNVC: 2
A60078425: RNCC: 5 | RNVC: 2

15 Jun 2012

5340-37-506-5951
Mounting Bracket

375065951
Q75012109: RNCC: 3 | RNVC: 2

2 Nov 1999

5340-37-512-9327
Charge Guide

375129327
Q25025594: RNCC: 3 | RNVC: 2
Q25025594: RNCC: 5 | RNVC: 2

17 Mar 2006

5340-37-524-1336
Way Floor Welding M

375241336
A60077124: RNCC: 3 | RNVC: 2
A60077124: RNCC: 5 | RNVC: 2

13 Aug 2012

5340-37-505-8010
Mounting Bracket

375058010
KDS 1510-1003: RNCC: 2 | RNVC: 1
81281311: RNCC: 3 | RNVC: 2
81281311-01: RNCC: 5 | RNVC: 2

9 Jun 1999

5340-37-521-4413
Access Cover

375214413
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81005367: RNCC: 3 | RNVC: 2
A81005367-01: RNCC: 5 | RNVC: 2

21 Jun 2011

5340-37-525-0457
Dust And Moisture Seal Protective Cover

375250457
KDS 5855-4012: RNCC: 2 | RNVC: 1
A40010781: RNCC: 3 | RNVC: 2
A40010781: RNCC: 5 | RNVC: 2

17 Dec 2012

5340-37-519-1310
Access Cover

375191310
WF392423-01: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-514-0968
Handle Latch

375140968
KDS 2320-4006: RNCC: 2 | RNVC: 1
A60017447: RNCC: 3 | RNVC: 2
KC1206: RNCC: 3 | RNVC: 2
A60017447: RNCC: 5 | RNVC: 2

28 Sep 2007

5340-37-526-0132
Spacing Threaded Standoff

375260132
KDS 2350-4008: RNCC: 2 | RNVC: 2
A60075426-3: RNCC: 5 | RNVC: 2

11 Apr 2013

5340-37-502-9881
Resilient Mount

375029881
KDS 2350-1015: RNCC: 2 | RNVC: 1
KDS 2350-1024: RNCC: 2 | RNVC: 1
60311707: RNCC: 3 | RNVC: 2

27 Oct 1994

5340-37-525-3281
Mounting Bracket

375253281
11V-00157: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-37-519-2662
Mounting Plate

375192662
599-41135: RNCC: 3 | RNVC: 2
599-41135: RNCC: 5 | RNVC: 2

25 Feb 2010

Load More Results