What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Quick Release Plunger?

A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is a Mortise Latch?

A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.

What is a Flush Catch?

A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).

What is a Clamp Bolt Assembly?

A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.

What is a Retaining Band?

A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.

What is a Bow Handle?

A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.

What is a Recess Handle?

A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.

What is a Bail Handle?

A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.

What is a Double Angle Bracket?

A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

What is a Strap Fastener Loop?

A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.

What is a Webbing Strap?

A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.

What is a Spring Tension Clip?

A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.

Hardware, Commercial - Korea (KR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Korea (KR) - NCB is 37

Page 43 of 56

NSN Format for Hardware, Commercial
Codified by Korea

53	40	37	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Korea (KR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 19 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 59 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 32 Items
Holder,Loop 25 Items
Holder,Spring 36 Items
What is a Rod End Connector? 58 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 89 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is a Metal Grille? 15 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 15 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 145 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 25 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 20 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Thumb Latch? 14 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 16 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 11 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Sliding Door Track? 13 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorknob? 12 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Tee Hinge? 11 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 16 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is a Butt Hinge Leaf? 45 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Mending Plate? 21 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 30 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Dust And Moisture Seal Protective Cap? 98 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 116 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 34 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 53 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 97 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 14 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Nut And Bolt Retainer? 12 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is an Angle Bracket? 1486 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 10 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Loop Clamp? 304 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 53 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 26 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 45 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 13 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flush Catch? 10 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 26 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 76 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 234 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 10 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 44 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 255 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 11 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 95 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 116 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 36 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 472 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 49 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 14 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Window Retaining Plate? 35 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 114 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 57 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Helical Compression Spring Seat? 18 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 40 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 42 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 19 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Vent Plug? 29 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 1435 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Threaded Rod End? 80 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 11 Items
What is a Manual Control Handle? 127 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Lever Bracket? 37 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 33 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 254 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 4187 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Section Block Clamp? 134 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Beam Gripping Clamp? 13 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 2701 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Synchro Clamp? 57 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 118 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Threaded Standoff? 11 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 36 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 247 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 33 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Runner? 23 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Track Stop? 13 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 30 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Masking Plate? 18 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 318 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 48 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Sliding Block? 18 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 41 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 25 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Shimmy Damper? 13 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 124 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 21 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Resilient Mount Plate? 12 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 80 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 11 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 91 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Locking Stay? 13 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 26 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Aircraft Latch Hook? 19 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 55 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 43 of 56

5340-37-502-9713
Double Angle Bracket

375029713
60310681: RNCC: 3 | RNVC: 2

20 Oct 1994

5340-37-502-8018
Sealing Plug Assembly

375028018
60051069: RNCC: 3 | RNVC: 2

22 Jul 1994

5340-37-513-1028
Mounting Bracket

375131028
80017568: RNCC: 3 | RNVC: 2
80017568: RNCC: 5 | RNVC: 2

11 Jul 2006

5340-37-508-5674
Nonmetallic Bumper

375085674
Q65033493: RNCC: 3 | RNVC: 2

5 Feb 2002

5340-37-519-1981
Angle Bracket

375191981
81362667: RNCC: 3 | RNVC: 2
81362667: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-37-523-7032
Manual Control Handle

375237032
60821503: RNCC: 3 | RNVC: 2
60821503: RNCC: 5 | RNVC: 2

13 Jul 2012

5340-37-513-7739
Mounting Plate

375137739
A20014602-01: RNCC: 3 | RNVC: 2
A20014602: RNCC: 5 | RNVC: 1
A20014602-01: RNCC: 5 | RNVC: 2

16 Jun 2007

5340-37-525-5774
Dust And Moisture Seal Protective Cover

375255774
87200-0401-010: RNCC: 3 | RNVC: 2

14 Feb 2013

5340-37-512-0702
Mounting Plate

375120702
KDS 1730-4001: RNCC: 2 | RNVC: 2
Q85013754: RNCC: 3 | RNVC: 2
KDS 1730-4001: RNCC: 3 | RNVC: 2
Q85013754: RNCC: 3 | RNVC: 2

8 Jun 2005

5340-37-520-3662
Mounting Plate

375203662
50156541: RNCC: 3 | RNVC: 2
50156541: RNCC: 5 | RNVC: 2

26 Nov 2010

5340-37-502-1598
Detent Plunger

375021598
60717102: RNCC: 3 | RNVC: 2
60717102: RNCC: 5 | RNVC: 2

28 Feb 1992

5340-37-507-8279
Loop Clamp

375078279
Q55600992: RNCC: 3 | RNVC: 2
Q55600992: RNCC: 5 | RNVC: 9
Q55600992: RNCC: 5 | RNVC: 9

17 May 2001

5340-37-526-1786
Mounting Plate

375261786
91027486: RNCC: 3 | RNVC: 2
91027486: RNCC: 5 | RNVC: 2

4 Jun 2013

5340-37-516-4027
Retaining Clamp Assembly

375164027
50140396: RNCC: 3 | RNVC: 2
50140396: RNCC: 5 | RNVC: 2

19 Nov 2008

5340-37-513-2697
Retaining Band

375132697
2A46MSB106-5: RNCC: 3 | RNVC: 2

7 Nov 2006

5340-37-521-8670
Mounting Bracket

375218670
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81240120: RNCC: 3 | RNVC: 2
A81240120-01: RNCC: 5 | RNVC: 2

20 Sep 2011

5340-37-516-0510
Shelf Bracket

375160510
91028229-01: RNCC: 3 | RNVC: 2
91028229-01: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-525-3352
Mounting Bracket

375253352
MT-SCU-0810: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-37-180-3747
Suspeder Ling

371803747
KDC 9601-P0032: RNCC: 2 | RNVC: 1
5340-97-180-3747: RNCC: 2 | RNVC: 2
5340971803747: RNCC: 5 | RNVC: 2
5340-97-180-3747: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-37-514-8685
Mounting Plate

375148685
50144861: RNCC: 3 | RNVC: 2
50144861: RNCC: 5 | RNVC: 2

19 Mar 2008

5340-37-504-4420
Turnbuckle

375044420
60042671: RNCC: 3 | RNVC: 2

17 Oct 1996

5340-37-527-1924
Mounting Bracket

375271924
A50059236: RNCC: 3 | RNVC: 2
A50059236: RNCC: 5 | RNVC: 2

17 Oct 2013

5340-37-510-2350
Idler Bracket

375102350
82323350: RNCC: 3 | RNVC: 2
82323350-01: RNCC: 5 | RNVC: 2

5 Dec 2003

5340-37-525-5905
Mounting Plate

375255905
83045654: RNCC: 3 | RNVC: 2

14 Feb 2013

5340-37-526-9012
Mounting Bracket

375269012
81079652: RNCC: 3 | RNVC: 2
81079652: RNCC: 5 | RNVC: 2

11 Sep 2013

5340-37-526-2010
Mounting Plate

375262010
91027969: RNCC: 3 | RNVC: 2
91027969: RNCC: 5 | RNVC: 2

12 Jun 2013

5340-37-523-8046
Angle Bracket

375238046
A60078778: RNCC: 3 | RNVC: 2
A60078778: RNCC: 5 | RNVC: 2

19 Jul 2012

5340-37-508-5303
Double Angle Bracket

375085303
Q65031571: RNCC: 3 | RNVC: 2

30 Jan 2002

5340-37-508-7064

5340-37-514-2138
Side Support Plate

375142138
50129759-2: RNCC: 3 | RNVC: 2
50129759-2: RNCC: 5 | RNVC: 2

31 Oct 2007

5340-37-503-6239
Angle Bracket

375036239
65.97480-0114: RNCC: 5 | RNVC: 9
60630778: RNCC: 5 | RNVC: 9

24 Nov 1995

5340-37-517-9629
Tr.M Valve Spool

375179629
175-15-45420: RNCC: 5 | RNVC: 1

2 Jul 2009

5340-37-517-6929
Shaft Idler

375176929
WF325119-01: RNCC: 3 | RNVC: 2

26 Jun 2009

5340-37-523-8748
Block Clamp

375238748
61530672: RNCC: 3 | RNVC: 2

25 Jul 2012

5340-37-520-1360
Swivel Caster

375201360
C01MA010: RNCC: 3 | RNVC: 2

18 Oct 2010

5340-37-505-9230
Double Angle Bracket

375059230
KDS 2350-1024: RNCC: 2 | RNVC: 1
60347472: RNCC: 3 | RNVC: 2

12 Jul 1999

5340-37-523-0312
Access Cover

375230312
KDC 2010-T4001: RNCC: 2 | RNVC: 1
DSN 1080/1140-7235: RNCC: 3 | RNVC: 2

12 Apr 2012

5340-37-504-7066

5340-37-505-3471

5340-37-515-3092
Upper Guide

375153092
50133466: RNCC: 3 | RNVC: 2
50133466: RNCC: 5 | RNVC: 2

30 May 2008

5340-37-512-4517
Drive Assembl Cover

375124517
20166034: RNCC: 3 | RNVC: 2
20166034: RNCC: 5 | RNVC: 2

24 Aug 2005

5340-37-522-2002
Mounting Bracket

375222002
KDS 5895-4031: RNCC: 2 | RNVC: 1
50136625: RNCC: 3 | RNVC: 2
50136625: RNCC: 5 | RNVC: 2

28 Nov 2011

5340-37-520-8155
Mounting Bracket

375208155
KDS 1020-3001: RNCC: 2 | RNVC: 1
A20017035: RNCC: 3 | RNVC: 2
A20017035: RNCC: 5 | RNVC: 2

11 Feb 2011

5340-37-522-2578
Mounting Plate

375222578
KDS 2350-4003: RNCC: 2 | RNVC: 1
61507184: RNCC: 3 | RNVC: 2
61507184: RNCC: 5 | RNVC: 2

2 Dec 2011

5340-37-524-0817
Multiple Angle Bracket

375240817
91039409: RNCC: 3 | RNVC: 2
91039409: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-516-0493
Shelf Bracket

375160493
91028454: RNCC: 3 | RNVC: 2
91028454: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-501-5701
Bracket

375015701
60715131: RNCC: 3 | RNVC: 2
60715131: RNCC: 5 | RNVC: 2

13 Apr 1990

5340-37-516-1781
Loop Clamp

375161781
83030046: RNCC: 3 | RNVC: 2
83030046: RNCC: 5 | RNVC: 2

3 Nov 2008

5340-37-505-5926
Maim Cover Sup Ring

375055926
Q55016355: RNCC: 3 | RNVC: 2

29 Mar 1999

5340-37-512-9956
Dust And Moisture Seal Protective Cover

375129956
Q25021935: RNCC: 3 | RNVC: 2
Q25021935: RNCC: 5 | RNVC: 2

12 Apr 2006

5340-37-509-3447
Saf Protector Plate

375093447
93012657: RNCC: 3 | RNVC: 2
93012657: RNCC: 3 | RNVC: 2

11 Nov 2002

5340-37-512-6557
Link Plate

375126557
40017128: RNCC: 3 | RNVC: 2
40017128: RNCC: 5 | RNVC: 2

17 Oct 2005

5340-37-505-3326
Mounting Plate

375053326
50104622: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-37-520-2543
Loop Holder

375202543
A40002517: RNCC: 3 | RNVC: 2
A40002517: RNCC: 5 | RNVC: 2

9 Nov 2010

5340-37-526-3558
Mounting Bracket

375263558
JOBK 34: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-37-502-7891
Section Block Clamp

375027891
60086803: RNCC: 3 | RNVC: 2

13 Jul 1994

5340-37-515-0551
T Bracket

375150551
50136068: RNCC: 3 | RNVC: 2
50136068: RNCC: 5 | RNVC: 2

17 Apr 2008

5340-37-524-0669
Loop Clamp

375240669
A60045808: RNCC: 3 | RNVC: 2
A60045808: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-512-1271
Multiple Angle Bracket

375121271
Q55606213: RNCC: 3 | RNVC: 2
Q55606213: RNCC: 5 | RNVC: 2

20 Jun 2005

5340-37-502-9573
Mounting Bracket

375029573
60310416: RNCC: 3 | RNVC: 2

17 Oct 1994

5340-37-515-0463
Mounting Bracket

375150463
50135772: RNCC: 3 | RNVC: 2
50135772: RNCC: 5 | RNVC: 2

16 Apr 2008

5340-37-006-5251

5340-37-500-8217

5340-37-526-3949
Block Clamp

375263949
3742504: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-37-526-3062
Cushioning Pad

375263062
60309157: RNCC: 3 | RNVC: 2
60309157: RNCC: 5 | RNVC: 2

2 Jul 2013

5340-37-502-9261
Mount

375029261
60309022: RNCC: 3 | RNVC: 2

6 Oct 1994

5340-37-519-2048
Access Cover

375192048
81362973: RNCC: 3 | RNVC: 2
81362973: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-37-507-0949
Double Angle Bracket

375070949
20101426: RNCC: 5 | RNVC: 9

12 May 2000

5340-37-505-4289
Cushion

375054289
93006470: RNCC: 5 | RNVC: 9
93006470: RNCC: 5 | RNVC: 9

1 Dec 1998

5340-37-520-3248
Mounting Plate

375203248
50156765: RNCC: 3 | RNVC: 2
50156765: RNCC: 5 | RNVC: 2

19 Nov 2010

5340-37-523-7171
Mounting Bracket

375237171
91043606: RNCC: 3 | RNVC: 2
91043606: RNCC: 5 | RNVC: 2

14 Jul 2012

5340-37-511-5819
Mounting Bracket

375115819
95010012: RNCC: 3 | RNVC: 2
95010012: RNCC: 5 | RNVC: 2

19 Feb 2005

5340-37-519-1102
Bow Handle

375191102
60027277: RNCC: 3 | RNVC: 2
60027277: RNCC: 5 | RNVC: 2

12 Jan 2010

5340-37-524-7247
Bow Handle

375247247
FHA64-04-35-90: RNCC: 3 | RNVC: 2

24 Oct 2012

5340-37-512-5302
Loop Clamp

375125302
85D6120-075: RNCC: 3 | RNVC: 2
85D6120-075: RNCC: 5 | RNVC: 2

2 Sep 2005

5340-37-522-2148
Sliding Block

375222148
KDC 1680-T4003: RNCC: 2 | RNVC: 1
A80046021-01: RNCC: 3 | RNVC: 2
A80046021: RNCC: 3 | RNVC: 2
A80046021-01: RNCC: 5 | RNVC: 2

28 Nov 2011

5340-37-523-3075
Sliding Block

375233075
S385080: RNCC: 3 | RNVC: 2
N15621105: RNCC: 5 | RNVC: 2

25 May 2012

5340-37-507-6639
Support Assembly

375076639
60324534: RNCC: 3 | RNVC: 2
60324534: RNCC: 5 | RNVC: 2

10 Feb 2001

5340-37-505-9182
Mounting Bracket

375059182
KDS 2350-1024: RNCC: 2 | RNVC: 1
60349073: RNCC: 3 | RNVC: 2

9 Jul 1999

5340-37-522-2740
Mounting Plate

375222740
KDS 2350-4003: RNCC: 2 | RNVC: 1
61507447: RNCC: 3 | RNVC: 2
61507447: RNCC: 5 | RNVC: 2

7 Dec 2011

5340-37-523-5208
Double Angle Bracket

375235208
61481114: RNCC: 3 | RNVC: 2
61481114: RNCC: 5 | RNVC: 2

22 Jun 2012

5340-37-512-3700
Bail Handle

375123700
AD50000807: RNCC: 3 | RNVC: 2
AD50000807: RNCC: 5 | RNVC: 2

28 Jul 2005

5340-37-509-2112

5340-37-506-5378

5340-37-555-0255

5340-37-525-7652
Mounting Bracket

375257652
N51004805: RNCC: 3 | RNVC: 2
N51004805: RNCC: 5 | RNVC: 2

14 Mar 2013

5340-37-520-3249
Mounting Plate

375203249
50156766: RNCC: 3 | RNVC: 2
50156766: RNCC: 5 | RNVC: 2

19 Nov 2010

5340-37-512-2239
Nonmetallic Bumper

375122239
60215106: RNCC: 3 | RNVC: 2
60215106: RNCC: 5 | RNVC: 2

4 Jul 2005

5340-37-524-0668
Dust And Moisture Seal Protective Cover

375240668
A60045807: RNCC: 3 | RNVC: 2
A60045807: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-512-1258
Dust And Moisture Seal Protective Cover

375121258
85J1516-001: RNCC: 3 | RNVC: 2
85J1516-001: RNCC: 5 | RNVC: 2

17 Jun 2005

5340-37-504-2949
Protector

375042949
KDS 2320-1022: RNCC: 2 | RNVC: 1
700 17 939: RNCC: 5 | RNVC: 9
700 17 939: RNCC: 5 | RNVC: 9

21 Aug 1996

5340-37-506-4688
Installatio Support

375064688
KDS 2350-1024: RNCC: 2 | RNVC: 1
60360116: RNCC: 3 | RNVC: 2

17 Sep 1999

5340-37-512-5594
Latch Stopper

375125594
85GA7201-025: RNCC: 3 | RNVC: 2
85GA7201-025: RNCC: 5 | RNVC: 2

9 Sep 2005

5340-37-524-3051
Mounting Bracket

375243051
KDS 5880-4001: RNCC: 2 | RNVC: 1
A40001437: RNCC: 3 | RNVC: 2
A40001437: RNCC: 5 | RNVC: 2

28 Aug 2012

5340-37-504-3324
Angle Bracket

375043324
50090922: RNCC: 5 | RNVC: 9

3 Sep 1996

5340-37-515-7557
Electronic Components Housing

375157557
83014284: RNCC: 3 | RNVC: 2
83014284: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-520-2666
Mounting Plate

375202666
50157027: RNCC: 3 | RNVC: 2
50157027: RNCC: 5 | RNVC: 2

11 Nov 2010

5340-37-523-2434
Mounting Bracket

375232434
KDC 1680-T4009: RNCC: 2 | RNVC: 1
A82013778: RNCC: 3 | RNVC: 2
A82013778: RNCC: 5 | RNVC: 2

21 May 2012

5340-37-510-3140
Mounting Bracket

375103140
80041712: RNCC: 3 | RNVC: 2

26 Dec 2003

5340-37-524-9928
Mounting Bracket

375249928
61527304: RNCC: 3 | RNVC: 2
61527304: RNCC: 5 | RNVC: 2

5 Dec 2012

5340-37-518-8906
Detent Plunger

375188906
92003135: RNCC: 3 | RNVC: 2
92003135: RNCC: 5 | RNVC: 2

24 Nov 2009

5340-37-515-2092
Mounting Bracket

375152092
Q45021537: RNCC: 3 | RNVC: 2
Q45021537: RNCC: 5 | RNVC: 2

13 May 2008

5340-37-520-1302
Top Cover

375201302
79601A00: RNCC: 3 | RNVC: 2
DM79601A00: RNCC: 3 | RNVC: 2

13 Oct 2010

5340-37-512-8776
Mounting Bracket

375128776
Q25023794: RNCC: 3 | RNVC: 2
Q25023794: RNCC: 5 | RNVC: 2

28 Feb 2006

5340-37-524-5162
Vent Plug

375245162
Q65303254: RNCC: 3 | RNVC: 2
Q65303254: RNCC: 5 | RNVC: 2

24 Sep 2012

5340-37-518-5101
Plug

375185101
20037-737: RNCC: 5 | RNVC: 2
20037-737: RNCC: 5 | RNVC: 2

10 Aug 2009

5340-37-520-4177
Access Cover

375204177
A60022878: RNCC: 3 | RNVC: 2
A60022878: RNCC: 5 | RNVC: 2

6 Dec 2010

5340-37-510-9338
Manual Control Lever

375109338
Q65059023: RNCC: 3 | RNVC: 2
Q65059023: RNCC: 5 | RNVC: 2

20 Jul 2004

5340-37-512-6343
Rot Connecting Road

375126343
60067900: RNCC: 3 | RNVC: 2
60067900: RNCC: 5 | RNVC: 2

6 Oct 2005

5340-37-510-6614
Mounting Bracket

375106614
70021446: RNCC: 3 | RNVC: 1
70021446: RNCC: 5 | RNVC: 2

24 Apr 2004

5340-37-519-1980
Angle Bracket

375191980
81362666: RNCC: 3 | RNVC: 2
81362666: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-37-519-5356
Clamping Catch

375195356
60238344: RNCC: 3 | RNVC: 2
60238344: RNCC: 5 | RNVC: 2

27 May 2010

5340-37-522-4764
Mounting Bracket

375224764
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85PF9865-603: RNCC: 3 | RNVC: 2
85PF9865-603: RNCC: 5 | RNVC: 2

11 Jan 2012

5340-37-522-3690
Clamp Bolt Assembly

375223690
50138141-01: RNCC: 3 | RNVC: 2
50138141: RNCC: D | RNVC: 9

21 Dec 2011

5340-37-514-9463
Mounting Bracket

375149463
50139368: RNCC: 3 | RNVC: 2
50139368: RNCC: 5 | RNVC: 2

1 Apr 2008

5340-37-511-8879
Stopper

375118879
20027173: RNCC: 3 | RNVC: 2
20027173: RNCC: 5 | RNVC: 2

22 Apr 2005

5340-37-516-1242
Mounting Plate

375161242
A80014292: RNCC: 3 | RNVC: 2
A80014292: RNCC: 5 | RNVC: 2

23 Oct 2008

5340-37-521-9638
Dust And Moisture Seal Protective Cover

375219638
A60067275: RNCC: 3 | RNVC: 2
A60067275: RNCC: 5 | RNVC: 2

14 Oct 2011

5340-37-514-2998
Left Cover

375142998
50129520: RNCC: 3 | RNVC: 2
50129520: RNCC: 5 | RNVC: 2

14 Nov 2007

5340-37-522-3149
Mounting Bracket

375223149
KDC 1680-T4007: RNCC: 2 | RNVC: 1
A80030247: RNCC: 3 | RNVC: 2
A8003024701: RNCC: 5 | RNVC: 2

16 Dec 2011

5340-37-519-1843
Mounting Bracket

375191843
81362281: RNCC: 3 | RNVC: 2
81362281: RNCC: 5 | RNVC: 2

22 Jan 2010

5340-37-521-6697
Mounting Bracket

375216697
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81029332: RNCC: 3 | RNVC: 2
A81029332-01: RNCC: 5 | RNVC: 2

28 Jul 2011

5340-37-513-1000
Spacer Collar

375131000
80017435-1: RNCC: 3 | RNVC: 2
80017435-1: RNCC: 5 | RNVC: 2

11 Jul 2006

5340-37-522-4216
Guard

375224216
60631072: RNCC: 3 | RNVC: 2
60631072: RNCC: 5 | RNVC: 2

28 Dec 2011

5340-37-502-8416
Socket

375028416
60051117: RNCC: 3 | RNVC: 2

14 Sep 1994

5340-37-504-4010
Blank Panel

375044010
50091147: RNCC: 5 | RNVC: 9

24 Sep 1996

5340-37-511-3865
Access Cover

375113865
20143049: RNCC: 3 | RNVC: 2
20143049: RNCC: 5 | RNVC: 2

2 Dec 2004

5340-37-525-6528
Access Cover

375256528
DSN1080/1140-7245: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-37-521-0707
Mounting Bracket

375210707
A81016317: RNCC: 3 | RNVC: 2
A81016317-03: RNCC: 3 | RNVC: 2
A81016317-03: RNCC: 5 | RNVC: 2

1 Apr 2011

5340-37-508-5580
Retaining Band

375085580
Q65031311: RNCC: 3 | RNVC: 2
Q65031311: RNCC: 3 | RNVC: 2

4 Feb 2002

5340-37-525-1645
Mounting Plate

375251645
91014561: RNCC: 3 | RNVC: 2
91014561: RNCC: 5 | RNVC: 2

9 Jan 2013

5340-37-513-0129
Access Cover

375130129
Q25026208: RNCC: 3 | RNVC: 2
Q25026208: RNCC: 5 | RNVC: 2

24 Apr 2006

5340-37-512-7212
Retaining Band

375127212
80017694: RNCC: 3 | RNVC: 2
80017694: RNCC: 5 | RNVC: 2

16 Nov 2005

5340-37-510-8526
Case Assembly

375108526
Q55026842: RNCC: 3 | RNVC: 1
Q55026842: RNCC: 3 | RNVC: 2

7 Jul 2004

5340-37-510-9863
Spring Tension Clip

375109863
Q65065915: RNCC: 3 | RNVC: 2
Q65065915: RNCC: 5 | RNVC: 2

24 Jul 2004

5340-37-525-6807
Angle Bracket

375256807
QFA-002574: RNCC: 3 | RNVC: 2

28 Feb 2013

5340-37-526-6287
Mounting Bracket

375266287
85D5523-675: RNCC: 5 | RNVC: 2
85D5523-675: RNCC: D | RNVC: 9

9 Aug 2013

5340-37-525-7756
Mounting Plate

375257756
N51007461: RNCC: 3 | RNVC: 2
N51007461: RNCC: 5 | RNVC: 2

14 Mar 2013

5340-37-516-0408
Shelf Bracket

375160408
91028242: RNCC: 3 | RNVC: 2
91028242: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-524-1353
Cushioning Pad

375241353
A60077184: RNCC: 3 | RNVC: 2
A60077184: RNCC: 5 | RNVC: 2

13 Aug 2012

5340-37-518-2768
Exhaust Manif Clamp

375182768
688-10-81: RNCC: 5 | RNVC: 2

24 Jul 2009

5340-37-510-6250
Ecc Top Plate

375106250
20120347: RNCC: 3 | RNVC: 1
20120347: RNCC: 3 | RNVC: 2
20120347: RNCC: 3 | RNVC: 2

15 Apr 2004

5340-37-513-7691
Angle Bracket

375137691
10301.6500.631. 001: RNCC: 3 | RNVC: 2

13 Jun 2007

5340-37-525-4726
Mounting Bracket

375254726
91044706: RNCC: 3 | RNVC: 2
91044706: RNCC: 5 | RNVC: 2

31 Jan 2013

5340-37-520-6382
Mounting Plate

375206382
A20017768: RNCC: 3 | RNVC: 2
A20017768: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-510-1591
Dust And Moisture Seal Protective Cover

375101591
20113287: RNCC: 3 | RNVC: 2
20113287: RNCC: 3 | RNVC: 2

20 Oct 2003

5340-37-504-3172
Bracket

375043172
50090183: RNCC: 5 | RNVC: 9

29 Aug 1996

5340-37-515-0211
Mounting Plate

375150211
50136230: RNCC: 3 | RNVC: 2
50136230: RNCC: 5 | RNVC: 2

14 Apr 2008

5340-37-512-8824
Nonmetallic Bumper

375128824
Q25022393: RNCC: 3 | RNVC: 2
Q25022393: RNCC: 5 | RNVC: 2

2 Mar 2006

5340-37-516-8949
Access Cover

375168949
80096409: RNCC: 3 | RNVC: 2
80096409: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-524-3170
Mounting Bracket

375243170
D60838630: RNCC: 3 | RNVC: 2

28 Aug 2012

5340-37-519-0434
Mounting Bracket

375190434
92003478: RNCC: 3 | RNVC: 2
92003478: RNCC: 5 | RNVC: 2

12 Dec 2009

5340-37-520-2691
Angle Bracket

375202691
10301.3780.200 SDET.PO3.13: RNCC: 3 | RNVC: 2

11 Nov 2010

5340-37-526-5830
Mounting Bracket

375265830
81077706: RNCC: 3 | RNVC: 2
81077706: RNCC: 5 | RNVC: 2

6 Aug 2013

5340-37-522-9814
Swivel Caster

375229814
GD60F: RNCC: 3 | RNVC: 2

4 Apr 2012

5340-37-522-4872
Mounting Bracket

375224872
50140170: RNCC: 3 | RNVC: 2
50140170: RNCC: 5 | RNVC: 2

13 Jan 2012

5340-37-527-1597
Mounting Plate

375271597
A50058796: RNCC: 3 | RNVC: 2
A50058796: RNCC: 5 | RNVC: 2

15 Oct 2013

5340-37-522-8398
Loop Clamp

375228398
A60073511: RNCC: 3 | RNVC: 2
A60073511: RNCC: 5 | RNVC: 2

16 Mar 2012

5340-37-511-7462
Mounting Bracket

375117462
Q65300508: RNCC: 3 | RNVC: 2
Q65300508: RNCC: 5 | RNVC: 2

29 Mar 2005

5340-37-526-5768
Angle Bracket

375265768
91024607: RNCC: 3 | RNVC: 2
91024607: RNCC: 5 | RNVC: 2

5 Aug 2013

5340-37-513-3659
Mounting Plate

375133659
Q55404302: RNCC: 3 | RNVC: 2
Q55404302: RNCC: 5 | RNVC: 2

22 Dec 2006

5340-37-517-2941
Bow Handle

375172941
USANB100: RNCC: 3 | RNVC: 2
USANB100: RNCC: 5 | RNVC: 2

25 May 2009

5340-37-519-3089
Block Clamp

375193089
81364511: RNCC: 3 | RNVC: 2
81364511: RNCC: 5 | RNVC: 2

10 Mar 2010

5340-37-519-2025
Mounting Bracket

375192025
81362863: RNCC: 3 | RNVC: 2
81362863: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-37-503-5207
Detent Lever

375035207
60715374: RNCC: 3 | RNVC: 2

29 Sep 1995

5340-37-523-2674
Access Cover

375232674
KDC 1680-T4009: RNCC: 2 | RNVC: 1
A82013995: RNCC: 3 | RNVC: 2
A82013995: RNCC: 5 | RNVC: 2

23 May 2012

5340-37-525-3192
Mounting Bracket

375253192
A50040599: RNCC: 3 | RNVC: 2
A50040599: RNCC: 5 | RNVC: 2

17 Jan 2013

5340-37-505-6359
Mounting Plate

375056359
KDS 2350-1024: RNCC: 2 | RNVC: 1
60360258: RNCC: 3 | RNVC: 2

15 Apr 1999

5340-37-511-3925
Clamping Catch

375113925
60530015-C: RNCC: 3 | RNVC: 2
60530015-C: RNCC: 5 | RNVC: 2

3 Dec 2004

5340-37-516-0566
Manual Control Lever

375160566
20030472: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030472: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-518-5057
Access Cover

375185057
20037-306: RNCC: 5 | RNVC: 2
20037-306: RNCC: 5 | RNVC: 2

10 Aug 2009

5340-37-515-3122
Slide Block

375153122
50135188: RNCC: 3 | RNVC: 2
50135188: RNCC: 5 | RNVC: 2

2 Jun 2008

5340-37-515-2336
Angle Bracket

375152336
50138114: RNCC: 3 | RNVC: 2
50138114: RNCC: 5 | RNVC: 2

15 May 2008

5340-37-523-8388
Webbing Strap

375238388
A60027351: RNCC: 3 | RNVC: 2
A60027351: RNCC: 5 | RNVC: 2

20 Jul 2012

5340-37-523-7925
Mounting Bracket

375237925
A60078630: RNCC: 3 | RNVC: 2
A60078630: RNCC: 5 | RNVC: 2

18 Jul 2012

5340-37-523-7874
Mounting Plate

375237874
A60078295: RNCC: 3 | RNVC: 2
A60078295: RNCC: 5 | RNVC: 2

18 Jul 2012

5340-37-523-7712
Mounting Bracket

375237712
91042239: RNCC: 3 | RNVC: 2
91042239: RNCC: 5 | RNVC: 2

18 Jul 2012

5340-37-511-1112
Cushioning Pad

375111112
60671489: RNCC: 3 | RNVC: 2
60671489-1: RNCC: 5 | RNVC: 2

25 Aug 2004

5340-37-503-7767

5340-37-504-2860

5340-37-505-0706

5340-37-523-4909
Mounting Plate

375234909
A60079728: RNCC: 3 | RNVC: 2
A60079728: RNCC: 5 | RNVC: 2

19 Jun 2012

5340-37-514-8999
Block Clamp

375148999
10301.6800.905: RNCC: 3 | RNVC: 2

24 Mar 2008

5340-37-512-3558
Mounting Bracket

375123558
Q55027705: RNCC: 3 | RNVC: 2
Q55027705: RNCC: 5 | RNVC: 2

28 Jul 2005

5340-37-512-8961
Mounting Plate

375128961
Q25024022: RNCC: 3 | RNVC: 2
Q25024022: RNCC: 5 | RNVC: 2

7 Mar 2006

5340-37-512-9126
Link

375129126
Q25027475: RNCC: 3 | RNVC: 2
Q25027475: RNCC: 5 | RNVC: 2

13 Mar 2006

5340-37-524-0836
Side Block

375240836
91039434: RNCC: 3 | RNVC: 2
91039434: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-513-0305
Detent Plunger

375130305
Q45024005: RNCC: 3 | RNVC: 2
Q45024005: RNCC: 5 | RNVC: 2

3 May 2006

5340-37-520-3080
Mounting Plate

375203080
50156650: RNCC: 3 | RNVC: 2
50156650: RNCC: 5 | RNVC: 2

17 Nov 2010

5340-37-511-0943
Bottom Plate

375110943
Q55608862: RNCC: 3 | RNVC: 2
Q55608862: RNCC: 5 | RNVC: 9

20 Aug 2004

5340-37-518-6993
Bow Handle

375186993
Q55030111: RNCC: 3 | RNVC: 2
Q55030111: RNCC: 5 | RNVC: 2

5 Oct 2009

5340-37-522-7228
Mounting Bracket

375227228
KDS2350-4005: RNCC: 2 | RNVC: 1
A60072734: RNCC: 3 | RNVC: 2
A60072734: RNCC: 5 | RNVC: 2

22 Feb 2012

5340-37-503-2793
Rod End Clevis

375032793
KDS 3805-1024: RNCC: 2 | RNVC: 1
60314591: RNCC: 3 | RNVC: 2

16 Jan 1995

5340-37-509-1227
Buckle

375091227
KDS 2320-4002: RNCC: 2 | RNVC: 1
Q65034565: RNCC: 3 | RNVC: 2
Q65034574: RNCC: 3 | RNVC: 2

8 Aug 2002

5340-37-519-4138
Mounting Bracket

375194138
A80015237: RNCC: 3 | RNVC: 2
A80015237: RNCC: 5 | RNVC: 2

1 Apr 2010

5340-37-523-1287
Angle Bracket

375231287
60347028: RNCC: 3 | RNVC: 2
60347028: RNCC: 5 | RNVC: 2

4 May 2012

5340-37-512-5862
Access Cover

375125862
Q55401310: RNCC: 3 | RNVC: 2
Q55401310: RNCC: 5 | RNVC: 2

15 Sep 2005

5340-37-512-4682
Loop Clamp

375124682
60527054: RNCC: 3 | RNVC: 2

29 Aug 2005

5340-37-525-5498
Mounting Bracket

375255498
A50040366: RNCC: 3 | RNVC: 2
A50040366: RNCC: 5 | RNVC: 2

6 Feb 2013

5340-37-511-6123
Double Angle Bracket

375116123
85PF9590-221: RNCC: 3 | RNVC: 2
85PF9590-221: RNCC: 5 | RNVC: 2

3 Mar 2005

5340-37-517-3992
Cover

375173992
7940-33-01-11: RNCC: 5 | RNVC: 9
7940-33-01-11: RNCC: 5 | RNVC: 9

4 Jun 2009

5340-37-522-8932
Angle Bracket

375228932
KDS 5895-4032: RNCC: 2 | RNVC: 1
50141116: RNCC: 3 | RNVC: 2
50141116: RNCC: 5 | RNVC: 2

29 Mar 2012

5340-37-518-5683
Mounting Plate

375185683
WF392326-02: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-37-521-7638
Mounting Bracket

375217638
KDS-5895-4050: RNCC: 2 | RNVC: 1
N51002431: RNCC: 3 | RNVC: 2
N51002431: RNCC: 5 | RNVC: 2

30 Aug 2011

5340-37-520-0375
Mounting Bracket

375200375
KDS-1015-4003: RNCC: 2 | RNVC: 2
A20013032: RNCC: 3 | RNVC: 2
A20013032: RNCC: 5 | RNVC: 2

27 Sep 2010

5340-37-511-6250
Multiple Angle Bracket

375116250
85Y1091-165: RNCC: 3 | RNVC: 2
85Y1091-165: RNCC: 5 | RNVC: 2

4 Mar 2005

5340-37-512-6692
Bow Handle

375126692
20165003: RNCC: 3 | RNVC: 2
HO4-11-32-120: RNCC: 5 | RNVC: 2

21 Oct 2005

5340-37-516-8873
Mounting Plate

375168873
80096112: RNCC: 3 | RNVC: 2
80096112: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-516-8739
Moterbox Cover

375168739
80095600: RNCC: 3 | RNVC: 2
80095600: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-524-0819
Heat Sink Pan Block

375240819
91039411: RNCC: 3 | RNVC: 2
91039411: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-502-9054
Handle

375029054
60308967: RNCC: 3 | RNVC: 2

5 Oct 1994

5340-37-502-5436
Cushioning Pad

375025436
60078844: RNCC: 3 | RNVC: 2
60078843: RNCC: 3 | RNVC: 2

29 Nov 1993

5340-37-527-0207
Access Cover

375270207
81076344: RNCC: 3 | RNVC: 2
81076344: RNCC: 5 | RNVC: 2

8 Oct 2013

5340-37-524-0789
Multiple Angle Bracket

375240789
91039290: RNCC: 3 | RNVC: 2
91039290: RNCC: 5 | RNVC: 2

9 Aug 2012

5340-37-523-9742
Moto Cover Assembly

375239742
91037980: RNCC: 3 | RNVC: 2
91037980: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-37-511-3615
Flexible Cabl Catch

375113615
40016979: RNCC: 3 | RNVC: 2
40016979: RNCC: 5 | RNVC: 2

20 Nov 2004

5340-37-526-1494
Dust And Moisture Seal Protective Cap

375261494
OS1167-B08-03: RNCC: 3 | RNVC: 2

30 May 2013

5340-37-513-6334
Snap Hook

375136334
KDS 1240-4001: RNCC: 2 | RNVC: 1
A20006314: RNCC: 3 | RNVC: 2
A20006314: RNCC: 5 | RNVC: 2

28 Apr 2007

5340-37-523-9383
Gas Filte Press Bar

375239383
60821423: RNCC: 3 | RNVC: 2
60821423: RNCC: 5 | RNVC: 2

2 Aug 2012

5340-37-520-7690
Angle Bracket

375207690
A81140131: RNCC: 3 | RNVC: 2
A8114013101: RNCC: 3 | RNVC: 2
A8114013101: RNCC: 5 | RNVC: 2

9 Feb 2011

5340-37-520-1243
Retaining Strap

375201243
85B1643-015: RNCC: 3 | RNVC: 2
85B1643-015: RNCC: 5 | RNVC: 2

12 Oct 2010

5340-37-524-8188
Dust And Moisture Seal Protective Plug

375248188
KDS 1240-4009: RNCC: 2 | RNVC: 1
61510242: RNCC: 3 | RNVC: 2
61510242: RNCC: 5 | RNVC: 2

6 Nov 2012

5340-37-518-4646
Mounting Bracket

375184646
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20013546: RNCC: 3 | RNVC: 2
A20013546: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-524-1668
Cable Top Support

375241668
A60079172: RNCC: 3 | RNVC: 2
A60079172: RNCC: 5 | RNVC: 2

16 Aug 2012

5340-37-510-6376
Mounting Plate

375106376
80074706: RNCC: 3 | RNVC: 1
80074706: RNCC: 5 | RNVC: 9

20 Apr 2004

5340-37-521-1065
Mounting Bracket

375211065
A60073850: RNCC: 5 | RNVC: 2
A60073850: RNCC: D | RNVC: 9

13 Apr 2011

5340-37-503-9516

5340-37-510-0528
Mounting Bracket

375100528
82286328: RNCC: 2 | RNVC: 2
82286328-01: RNCC: 2 | RNVC: 2

3 Sep 2003

5340-37-510-3244
Webbing Strap

375103244
81045613: RNCC: 4 | RNVC: 1
81045613-03: RNCC: 5 | RNVC: 9

29 Dec 2003

5340-37-516-0490
Side Panel

375160490
91028451-02: RNCC: 3 | RNVC: 2
91028451-02: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-516-5571
Access Cover

375165571
20030500: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030500: RNCC: 5 | RNVC: 2

23 Dec 2008

5340-37-505-7310
Mounting Plate

375057310
KDS 1510-4001: RNCC: 2 | RNVC: 1
81273404: RNCC: 5 | RNVC: 9
81273404-01: RNCC: 5 | RNVC: 9

20 May 1999

5340-37-520-2577
Dust And Moisture Seal Protective Cover

375202577
KDC 0001-P4001: RNCC: 2 | RNVC: 1
AD71000238: RNCC: 3 | RNVC: 2
KDS6910-4003: RNCC: 4 | RNVC: 1
AD71000238: RNCC: 5 | RNVC: 2

10 Nov 2010

5340-37-512-8062
Upp Wormwheel Cover

375128062
Q25024808: RNCC: 3 | RNVC: 2
Q25024808: RNCC: 5 | RNVC: 2

3 Feb 2006

5340-37-522-6412
Mounting Bracket

375226412
50143563: RNCC: 3 | RNVC: 2
50143563: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-37-520-5328
Access Cover

375205328
A20015625: RNCC: 3 | RNVC: 2
A20015625: RNCC: 5 | RNVC: 2

13 Dec 2010

5340-37-512-4811
Guide Ring

375124811
60097500: RNCC: 3 | RNVC: 2
60097500: RNCC: 5 | RNVC: 2

30 Aug 2005

5340-37-510-6127
Spring Tension Clip

375106127
60574257: RNCC: 3 | RNVC: 1
60574257: RNCC: 3 | RNVC: 2

13 Apr 2004

5340-37-524-3572
Handle Grip

375243572
61529643: RNCC: 3 | RNVC: 2
61529643: RNCC: 5 | RNVC: 2

31 Aug 2012

5340-37-503-5428
Section Block Clamp

375035428
60749153: RNCC: 3 | RNVC: 2
60749153: RNCC: 5 | RNVC: 2

13 Oct 1995

5340-37-519-8118
Mounting Bracket

375198118
A20010317: RNCC: 3 | RNVC: 2
A20010317: RNCC: 5 | RNVC: 2

9 Aug 2010

5340-37-506-5839
Retaining Clip

375065839
HA654: RNCC: 5 | RNVC: 9
HA654: RNCC: 5 | RNVC: 9

1 Nov 1999

5340-37-504-4321
Fuel Cover Assembly

375044321
60052080: RNCC: 3 | RNVC: 2

15 Oct 1996

5340-37-506-8707
Shock Mount Pad

375068707
KDS 2350-1024: RNCC: 2 | RNVC: 1
60340216: RNCC: 3 | RNVC: 2

22 Jan 2000

5340-37-506-5945
Angle Bracket

375065945
Q75012141: RNCC: 3 | RNVC: 2

2 Nov 1999

5340-37-515-9611
Angle Bracket

375159611
91031368: RNCC: 3 | RNVC: 2
91031368: RNCC: 5 | RNVC: 2

20 Oct 2008

5340-37-516-8688
Mounting Bracket

375168688
80095379: RNCC: 3 | RNVC: 2
80095379: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-505-0628
Mounting Bracket

375050628
50106225: RNCC: 3 | RNVC: 2

12 Mar 1998

5340-37-508-0444
Keeping Box Cover

375080444
80267166: RNCC: 5 | RNVC: 2

12 Sep 2001

5340-37-505-0387
Manual Control Handle

375050387
60077094: RNCC: 3 | RNVC: 2
60077094: RNCC: 5 | RNVC: 2

26 Feb 1998

5340-37-510-6660
Mechanical Stop

375106660
60574303: RNCC: 3 | RNVC: 2
60574303: RNCC: 5 | RNVC: 2

27 Apr 2004

5340-37-525-3562
Swivel Caster

375253562
HS12878: RNCC: 3 | RNVC: 2

19 Jan 2013

5340-37-519-3650
Access Cover

375193650
A20008017: RNCC: 3 | RNVC: 2
A20008017: RNCC: 5 | RNVC: 2

22 Mar 2010

5340-37-508-4876
Dust And Moisture Seal Boot

375084876
Q65027368: RNCC: 3 | RNVC: 2

21 Jan 2002

5340-37-518-0181
Mounting Bracket

375180181
60822111: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60822111: RNCC: 5 | RNVC: 2

6 Jul 2009

5340-37-502-0604
Helical Compression Spring Seat

375020604
65,04103-0075: RNCC: 5 | RNVC: 9
60630128: RNCC: 5 | RNVC: 9

11 Nov 1991

5340-37-525-3264
Mounting Bracket

375253264
11V-00112: RNCC: 3 | RNVC: 2

17 Jan 2013

5340-37-521-0802
Cowling Lock

375210802
A81016372-01: RNCC: 3 | RNVC: 2
A81016372-01: RNCC: 5 | RNVC: 2
A81016372: RNCC: D | RNVC: 9

5 Apr 2011

5340-37-506-6552
Manual Control Lever

375066552
KDS 1510-1003: RNCC: 2 | RNVC: 1
81761414: RNCC: 3 | RNVC: 2
81761414-01: RNCC: 3 | RNVC: 2

11 Nov 1999

5340-37-004-1126
Intake Hand Rail

370041126
KDS 4230-1001: RNCC: 2 | RNVC: 1
5340-97-004-1126: RNCC: 2 | RNVC: 2
4230-500-0000380: RNCC: 3 | RNVC: 2
4230-500-0000380: RNCC: 3 | RNVC: 2
4230-500-0000380: RNCC: 5 | RNVC: 9
4230-1001: RNCC: 5 | RNVC: 9
4230-500-0000380: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-37-521-3725
Loop Clamp

375213725
KDS2350-4005: RNCC: 2 | RNVC: 1
A60072030: RNCC: 3 | RNVC: 2
A60072030: RNCC: 5 | RNVC: 2

30 May 2011

5340-37-518-4219
Mounting Plate

375184219
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20011030: RNCC: 3 | RNVC: 2
A20011030: RNCC: 5 | RNVC: 2

29 Jul 2009

5340-37-511-8262
Mounting Plate

375118262
85P5811-005: RNCC: 3 | RNVC: 2
85P5811-005: RNCC: 5 | RNVC: 2

8 Apr 2005

5340-37-518-5318
Access Cover

375185318
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20012933: RNCC: 3 | RNVC: 2
A20012933: RNCC: 5 | RNVC: 2

11 Aug 2009

5340-37-518-6290
Access Cover

375186290
60831626: RNCC: 3 | RNVC: 2
KDS 5865-4003: RNCC: 4 | RNVC: 1
60831626: RNCC: 5 | RNVC: 2

31 Aug 2009

5340-37-518-5703
Mounting Plate

375185703
WF395301-01: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-37-511-3788
Bow Handle

375113788
60523211-C: RNCC: 3 | RNVC: 2
60523211-C: RNCC: 5 | RNVC: 2

27 Nov 2004

5340-37-518-3551
Cap

375183551
SRC1211131-001: RNCC: 5 | RNVC: 1

28 Jul 2009

5340-37-512-3551
Mounting Bracket

375123551
Q55027757: RNCC: 3 | RNVC: 2
Q55027757: RNCC: 5 | RNVC: 2

28 Jul 2005

5340-37-505-7178
Mounting Bracket

375057178
Q45016094: RNCC: 3 | RNVC: 2

18 May 1999

5340-37-521-4225
Double Angle Bracket

375214225
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81004362-01: RNCC: 3 | RNVC: 2
A81004362-01: RNCC: 5 | RNVC: 2
A81004362: RNCC: D | RNVC: 9

16 Jun 2011

5340-37-505-1975
Mounting Plate

375051975
KDS 5820-1298: RNCC: 2 | RNVC: 1
50106663: RNCC: 3 | RNVC: 2

13 Jun 1998

5340-37-511-0780
Angle Bracket

375110780
Q65079393: RNCC: 3 | RNVC: 1
Q65079393-2: RNCC: 3 | RNVC: 2

17 Aug 2004

5340-37-513-2916
Rotating Plate

375132916
688-14-SB307: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-37-525-7225
Angle Bracket

375257225
TSF-VMAF04-20HW: RNCC: 3 | RNVC: 2

8 Mar 2013

5340-37-512-2249
Retaining Strap

375122249
50127297: RNCC: 3 | RNVC: 2
50127297: RNCC: 5 | RNVC: 2

4 Jul 2005

5340-37-506-1354
Mounting Bracket

375061354
KDS 2350-1024: RNCC: 2 | RNVC: 1
60342310: RNCC: 3 | RNVC: 2

11 Aug 1999

5340-37-004-1028
Padlock

370041028
KDS 4230-1001: RNCC: 2 | RNVC: 1
5340-97-004-1028: RNCC: 2 | RNVC: 2
4230-500-0000409: RNCC: 5 | RNVC: 9
4230-500-0000409: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-37-517-9282
Mounting Bracket

375179282
WF272464-01: RNCC: 3 | RNVC: 2

1 Jul 2009

5340-37-518-7538
Mounting Bracket

375187538
60820350: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60820350: RNCC: 5 | RNVC: 2

23 Oct 2009

5340-37-519-3855
Mounting Bracket

375193855
A20007608: RNCC: 3 | RNVC: 2
A20007608: RNCC: 5 | RNVC: 2

24 Mar 2010

5340-37-520-5975
Mounting Bracket

375205975
A20015795: RNCC: 3 | RNVC: 2
A20015795: RNCC: 5 | RNVC: 2

20 Dec 2010

5340-37-515-7448
Mounting Plate

375157448
83014027: RNCC: 3 | RNVC: 2
83014027: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-525-7414
Window Retaining Plate

375257414
N51005103: RNCC: 3 | RNVC: 2
N51005103: RNCC: 5 | RNVC: 2

12 Mar 2013

5340-37-524-0612
Rear Panel

375240612
91039156: RNCC: 3 | RNVC: 2
91039156: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-37-524-2082
Hook Handle

375242082
KDS 5855-4012: RNCC: 2 | RNVC: 1
A40008695: RNCC: 3 | RNVC: 2
A40008695: RNCC: 5 | RNVC: 2

21 Aug 2012

5340-37-507-1271
Mounting Bracket

375071271
20102195: RNCC: 5 | RNVC: 9

31 May 2000

5340-37-556-4301
Angle Bracket

375564301
20557: RNCC: 3 | RNVC: 2
5340NSN020557: RNCC: 5 | RNVC: 1

30 Mar 2004

5340-37-513-4654
Synchro Clamp

375134654
Q65036599: RNCC: 3 | RNVC: 2
Q65036599: RNCC: 5 | RNVC: 2

30 Jan 2007

5340-37-526-3584
Mounting Bracket

375263584
3748961: RNCC: 3 | RNVC: 2

9 Jul 2013

5340-37-507-0172
Servo Cylinde Cover

375070172
95001569: RNCC: 3 | RNVC: 2

23 Mar 2000

5340-37-527-2309
Mounting Bracket

375272309
000 306 972101: RNCC: 3 | RNVC: 2

18 Oct 2013

5340-37-511-6225
Angle Bracket

375116225
85Y9134-011: RNCC: 3 | RNVC: 2
85Y9134-011: RNCC: 5 | RNVC: 2

4 Mar 2005

5340-37-518-8124
Double Angle Bracket

375188124
85PF9580-275: RNCC: 3 | RNVC: 2
85PF9580-275: RNCC: 5 | RNVC: 2

11 Nov 2009

5340-37-511-7484
Multiple Angle Bracket

375117484
85L5164-303: RNCC: 3 | RNVC: 2
85L5164-303: RNCC: 5 | RNVC: 2

29 Mar 2005

5340-37-506-3605
Mounting Plate

375063605
KDS 6920-3001: RNCC: 2 | RNVC: 1
29910106: RNCC: 3 | RNVC: 2
A29910106: RNCC: 3 | RNVC: 2

28 Aug 1999

5340-37-522-4553
Bow Handle

375224553
H6-301-22-60: RNCC: 3 | RNVC: 2

9 Jan 2012

5340-37-520-0565
Mounting Plate

375200565
85B1641-016: RNCC: 3 | RNVC: 2
85B1641-016: RNCC: 5 | RNVC: 2

28 Sep 2010

5340-37-524-2152
Dust And Moisture Seal Protective Cap-Plug

375242152
7-637-1003-100-0006: RNCC: 3 | RNVC: 2

21 Aug 2012

5340-37-523-6440
Access Door Hinge

375236440
KDS 2350-4003: RNCC: 2 | RNVC: 1
61545147: RNCC: 3 | RNVC: 2
61545147: RNCC: 5 | RNVC: 2

11 Jul 2012

5340-37-515-7495
Mounting Plate

375157495
83014176: RNCC: 3 | RNVC: 2
83014176: RNCC: 5 | RNVC: 2

25 Sep 2008

5340-37-510-1355
Dust And Moisture Seal Protective Cover

375101355
SJBC4PL-C: RNCC: 3 | RNVC: 2

6 Oct 2003

5340-37-520-5514
Threaded Rod End

375205514
A20008173: RNCC: 3 | RNVC: 2
JM10 M10X1.5: RNCC: 3 | RNVC: 2
A20008173: RNCC: 5 | RNVC: 2

14 Dec 2010

5340-37-514-9619
Left Side Panel

375149619
50145387: RNCC: 3 | RNVC: 2
50145387: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-37-527-2776
Dust And Moisture Seal Protective Cap-Plug

375272776
CP-30-HP-3-BLACK: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-37-518-1375
Pad Eye

375181375
60824110: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60824110: RNCC: 5 | RNVC: 2

21 Jul 2009

5340-37-504-8657
Nonmetallic Bumper

375048657
KDS 2320-1023: RNCC: 2 | RNVC: 1
60381419: RNCC: 5 | RNVC: 9
60381419: RNCC: 5 | RNVC: 9

6 Nov 1997

5340-37-511-6547
Angle Bracket

375116547
85Y5091-129: RNCC: 3 | RNVC: 2
85Y5091-129: RNCC: 5 | RNVC: 2

15 Mar 2005

5340-37-505-8431
Rod End Clevis

375058431
KDS 1510-1003: RNCC: 2 | RNVC: 1
81323341: RNCC: 3 | RNVC: 2
81323341-01: RNCC: 5 | RNVC: 2

22 Jun 1999

5340-37-525-2318
Mounting Plate

375252318
91045556: RNCC: 3 | RNVC: 2
91045556: RNCC: 5 | RNVC: 2

14 Jan 2013

5340-37-520-8414
Access Cover

375208414
60828434: RNCC: 3 | RNVC: 2
60828434: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-37-518-5118
Elastic Strap

375185118
20039-477: RNCC: 5 | RNVC: 2
20039-477: RNCC: 5 | RNVC: 2

10 Aug 2009

5340-37-521-0715
Mechanical Stop

375210715
A81016330-01: RNCC: 3 | RNVC: 2
A81016330-01: RNCC: 5 | RNVC: 2
A81016330: RNCC: D | RNVC: 9

4 Apr 2011

5340-37-512-3584
Mounting Bracket

375123584
Q55028099: RNCC: 3 | RNVC: 2
Q55028099: RNCC: 5 | RNVC: 2

28 Jul 2005

5340-37-504-3630
Rear Plate

375043630
KDS 1285-1011: RNCC: 2 | RNVC: 1
50089818: RNCC: 5 | RNVC: 9
50089818: RNCC: 5 | RNVC: 9

10 Sep 1996

5340-37-512-6424
Fixture

375126424
AD50001164: RNCC: 3 | RNVC: 2
AD50001164: RNCC: 5 | RNVC: 2

7 Oct 2005

5340-37-511-3294
Print Mounting Rack

375113294
50112459: RNCC: 3 | RNVC: 2
50112459: RNCC: 5 | RNVC: 2

3 Nov 2004

5340-37-513-0919
Mounting Plate

375130919
80016665: RNCC: 3 | RNVC: 2
80016665: RNCC: 5 | RNVC: 2

4 Jul 2006

5340-37-511-0733
Setscrew Holder

375110733
Q55607498: RNCC: 3 | RNVC: 1
Q55607498: RNCC: 5 | RNVC: 9

14 Aug 2004

5340-37-523-8235
Access Cover

375238235
60818562: RNCC: 3 | RNVC: 2
60818562: RNCC: 5 | RNVC: 2

19 Jul 2012

5340-37-511-3423
Cushioning Pad

375113423
81043091: RNCC: 3 | RNVC: 2
81043091: RNCC: 5 | RNVC: 2

9 Nov 2004

5340-37-506-0515
Cam Plate Detonatin

375060515
KDS 1025-1149: RNCC: 2 | RNVC: 1
20026426: RNCC: 3 | RNVC: 2

31 Jul 1999

5340-37-521-9273
Mounting Bracket

375219273
KDS 2350-4003: RNCC: 2 | RNVC: 1
61508557: RNCC: 3 | RNVC: 2
61508557: RNCC: 5 | RNVC: 2

26 Sep 2011

5340-37-518-8480
Access Cover

375188480
KDS 1230-4004: RNCC: 2 | RNVC: 1
60819209: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60819209: RNCC: 5 | RNVC: 2

18 Nov 2009

5340-37-518-3415
Bracket Assembly

375183415
SRP1210079-501: RNCC: 3 | RNVC: 2

28 Jul 2009

5340-37-509-2097
Embarkation Band As

375092097
KDS 1356-4001: RNCC: 2 | RNVC: 1
93011391: RNCC: 3 | RNVC: 2
93011391: RNCC: 5 | RNVC: 9
93011391: RNCC: 5 | RNVC: 9

10 Sep 2002

5340-37-503-2783
Clamping Catch

375032783
KDS 3805-1024: RNCC: 2 | RNVC: 1
60314498: RNCC: 3 | RNVC: 2

2 Feb 1996

5340-37-511-5399
Angle Bracket

375115399
85PF9301-201: RNCC: 3 | RNVC: 2
85PF9301-201: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-37-517-8026
Access Cover

375178026
KDS 1230-4002: RNCC: 2 | RNVC: 1
60833045: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60833045: RNCC: 5 | RNVC: 2

29 Jun 2009

5340-37-519-9374
Mounting Bracket

375199374
85PF6445-802: RNCC: 3 | RNVC: 2
85PF6445-802: RNCC: 5 | RNVC: 2
85PF6445-801: RNCC: D | RNVC: 9

31 Aug 2010

5340-37-502-3149
Angle Bracket

375023149
KDS 6230-1047: RNCC: 2 | RNVC: 1
1430-21S: RNCC: 3 | RNVC: 2
N91001001: RNCC: 5 | RNVC: 2

1 Dec 1992

5340-37-520-6647
Mounting Plate

375206647
KDS 1005-1389: RNCC: 2 | RNVC: 1
Q55607035: RNCC: 3 | RNVC: 2
Q55607035: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-502-6040
Double Angle Bracket

375026040
60058136: RNCC: 3 | RNVC: 2

4 Mar 1994

5340-37-505-9822
Access Cover

375059822
KDS 2350-1024: RNCC: 2 | RNVC: 1
60342753: RNCC: 3 | RNVC: 2

21 Jul 1999

5340-37-510-4896
Nut And Bolt Locking Plate

375104896
80075365: RNCC: 5 | RNVC: 9

16 Mar 2004

5340-37-557-2045
Angle Bracket

375572045
KDS 1510-1003: RNCC: 2 | RNVC: 1
81351308-01: RNCC: 5 | RNVC: 1

14 Apr 2004

5340-37-526-1669
Dust And Moisture Seal Protective Plug

375261669
986-4083: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-37-524-8044
Loop Clamp

375248044
60818028-2: RNCC: 3 | RNVC: 2
60818028-2: RNCC: 5 | RNVC: 2
60818028: RNCC: D | RNVC: 9

31 Oct 2012

5340-37-518-9311
Mounting Plate

375189311
60819451: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60819451: RNCC: 5 | RNVC: 2

1 Dec 2009

5340-37-521-6736
Angle Bracket

375216736
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81034330: RNCC: 3 | RNVC: 2
A81034330-01: RNCC: 5 | RNVC: 2

28 Jul 2011

5340-37-511-8954
Angle Bracket

375118954
85Y9131-121: RNCC: 3 | RNVC: 2
85Y9131-121: RNCC: 5 | RNVC: 2

28 Apr 2005

5340-37-512-8013
Mounting Bracket

375128013
60311711: RNCC: 3 | RNVC: 2
60311711: RNCC: 5 | RNVC: 2

16 Dec 2005

5340-37-513-9795
Bumper

375139795
Q55028545: RNCC: 3 | RNVC: 2
Q55028545: RNCC: 5 | RNVC: 2

28 Aug 2007

5340-37-514-2742
Cushioning Pad

375142742
50139257: RNCC: 3 | RNVC: 2
50139257: RNCC: 5 | RNVC: 2

12 Nov 2007

5340-37-512-1340
Mounting Plate

375121340
50125915: RNCC: 3 | RNVC: 2
50125915: RNCC: 5 | RNVC: 2

20 Jun 2005

5340-37-510-3308
Angle Bracket

375103308
Q55016835: RNCC: 3 | RNVC: 2
Q55016835: RNCC: 5 | RNVC: 2

30 Dec 2003

5340-37-510-3153
Mounting Bracket

375103153
80042177: RNCC: 3 | RNVC: 2

26 Dec 2003

5340-37-519-3102
Bow Handle

375193102
81364807: RNCC: 3 | RNVC: 2
81364807: RNCC: 5 | RNVC: 2

10 Mar 2010

5340-37-511-0118
Detent Plunger

375110118
25020386: RNCC: 3 | RNVC: 2
Q25020386: RNCC: 3 | RNVC: 2

28 Jul 2004

5340-37-514-3497
Mounting Plate

375143497
50139033: RNCC: 3 | RNVC: 2
50139033: RNCC: 5 | RNVC: 2

22 Nov 2007

5340-37-514-1981
Retaining Cover

375141981
A90008001: RNCC: 3 | RNVC: 2
A90008001: RNCC: 5 | RNVC: 2

25 Oct 2007

5340-37-501-3504
Bracket Assembly

375013504
60748752: RNCC: 3 | RNVC: 2
60748752: RNCC: 5 | RNVC: 2

29 Jun 1989

5340-37-501-5579
Bracket Assembly

375015579
60771803: RNCC: 3 | RNVC: 2
60771803: RNCC: 5 | RNVC: 2
871 230 23 40: RNCC: 5 | RNVC: 2

2 Apr 1990

5340-37-524-9792
Rod End Connector

375249792
P310D1015090: RNCC: 3 | RNVC: 2

4 Dec 2012

5340-37-512-6833
Mounting Bracket

375126833
85GA7541-007: RNCC: 3 | RNVC: 2
85GA7541-007: RNCC: 3 | RNVC: 2

25 Oct 2005

5340-37-505-8659
Access Cover

375058659
KDS 2350-1024: RNCC: 2 | RNVC: 1
60344109: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-37-518-5320
Access Cover

375185320
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20012972: RNCC: 3 | RNVC: 2
A20012972: RNCC: 5 | RNVC: 2

11 Aug 2009

5340-37-506-4694
Bearing Prote Cover

375064694
KDS 2350-1024: RNCC: 2 | RNVC: 1
60343755: RNCC: 3 | RNVC: 2

17 Sep 1999

5340-37-504-2586
Support Assembly

375042586
KDC2350-P0001-16: RNCC: 2 | RNVC: 1
70017122: RNCC: 5 | RNVC: 9

5 Aug 1996

5340-37-522-8468
Mounting Bracket

375228468
KDS 5895-4032: RNCC: 2 | RNVC: 1
50140863: RNCC: 3 | RNVC: 2
50140863: RNCC: 5 | RNVC: 2

19 Mar 2012

5340-37-521-9305
Double Angle Bracket

375219305
KDS 2350-4003: RNCC: 2 | RNVC: 1
61515620: RNCC: 3 | RNVC: 2
61515620: RNCC: 5 | RNVC: 2

26 Sep 2011

5340-37-512-2505
Swivel Caster

375122505
GDC-125-SF: RNCC: 3 | RNVC: 2
GDC-125-SF: RNCC: 5 | RNVC: 2

12 Jul 2005

5340-37-512-6072
Angle Bracket

375126072
85GA3219-047: RNCC: 3 | RNVC: 2
85GA3219-047: RNCC: 5 | RNVC: 2

27 Sep 2005

5340-37-515-4765
Bow Handle

375154765
H84-01-28-50: RNCC: 3 | RNVC: 2
H84-01-28-50: RNCC: 5 | RNVC: 2

7 Jul 2008

5340-37-508-3739
Retaining Clip

375083739
KDS 1005-1341: RNCC: 2 | RNVC: 1
20024349: RNCC: 3 | RNVC: 2

11 Dec 2001

5340-37-502-3639
Strap Fastener Loop

375023639
KDS 2350-1005: RNCC: 2 | RNVC: 1
60027288: RNCC: 3 | RNVC: 2

26 Feb 1993

5340-37-508-1761
Roller

375081761
KDS 1005-1389: RNCC: 2 | RNVC: 1
20119201: RNCC: 3 | RNVC: 2

30 Oct 2001

5340-37-520-2816
Mounting Plate

375202816
10301.6514.090: RNCC: 3 | RNVC: 2

12 Nov 2010

5340-37-506-5870
Mounting Plate

375065870
KDS 3010-1042: RNCC: 2 | RNVC: 1
60358069: RNCC: 3 | RNVC: 2
24-21: RNCC: 5 | RNVC: 2

1 Nov 1999

5340-37-130-2820
Lh Clamp

371302820
5340-97-130-2820: RNCC: 5 | RNVC: 9

4 Feb 2004

5340-37-505-4021
Mounting Plate

375054021
60307528: RNCC: 3 | RNVC: 2
60307528-1: RNCC: 3 | RNVC: 2

10 Nov 1998

5340-37-506-5947
Angle Bracket

375065947
Q75012118: RNCC: 3 | RNVC: 2

2 Nov 1999

5340-37-523-5463
Pipe Hanger

375235463
61481298: RNCC: 3 | RNVC: 2
61481298: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-37-522-5976
Mounting Bracket

375225976
50145642: RNCC: 3 | RNVC: 2
50145642: RNCC: 5 | RNVC: 2

6 Feb 2012

5340-37-516-6216
Rubber Bumper

375166216
60027019: RNCC: 3 | RNVC: 2
60027019: RNCC: 5 | RNVC: 2

29 Jan 2009

5340-37-522-6511
Handle Grip

375226511
A82011921: RNCC: 3 | RNVC: 2
A82011921: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-37-512-8260
Angle Bracket

375128260
Q25026955: RNCC: 3 | RNVC: 2
Q25026955: RNCC: 5 | RNVC: 2

14 Feb 2006

5340-37-502-5940
Mounting Bracket

375025940
60055507: RNCC: 3 | RNVC: 2
60055507: RNCC: 5 | RNVC: 2

21 Feb 1994

5340-37-522-3174
Rod End Clevis

375223174
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A80030434: RNCC: 3 | RNVC: 2
A8003043401: RNCC: 5 | RNVC: 2

16 Dec 2011

5340-37-522-6258
Mounting Bracket

375226258
A60072242: RNCC: 3 | RNVC: 2
A60072242: RNCC: 5 | RNVC: 2

10 Feb 2012

5340-37-502-9733
Retaining Strap

375029733
60311177: RNCC: 3 | RNVC: 2

21 Oct 1994

5340-37-510-3492
Multiple Angle Bracket

375103492
80044645: RNCC: 3 | RNVC: 2

12 Jan 2004

5340-37-516-8779
Mounting Plate

375168779
80095665: RNCC: 3 | RNVC: 2
80095665: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-513-2708
Switch Button Cover

375132708
BU25.014: RNCC: 3 | RNVC: 2

9 Nov 2006

5340-37-512-1669
Access Cover

375121669
85B5513-029: RNCC: 3 | RNVC: 2
85B5513-029: RNCC: 5 | RNVC: 2

24 Jun 2005

5340-37-523-5156
Extension Drawer Slide

375235156
KDS 1285-1010: RNCC: 2 | RNVC: 1
Q55606961: RNCC: 3 | RNVC: 2
Q55606961: RNCC: 5 | RNVC: 2

21 Jun 2012

5340-37-506-0892
Plunger Fixed

375060892
KDS 1025-1149: RNCC: 2 | RNVC: 1
20026593: RNCC: 3 | RNVC: 2

6 Aug 1999

5340-37-525-1856
Dust And Moisture Seal Protective Cap-Plug

375251856
SJ-403-103: RNCC: 3 | RNVC: 2

10 Jan 2013

5340-37-522-7945
Access Cover

375227945
KDC 2010-T4001: RNCC: 2 | RNVC: 1
DSN1140-4709: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-37-518-7368
Spring Holder

375187368
61502018: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61502018: RNCC: 5 | RNVC: 2

16 Oct 2009

5340-37-523-1354
Section Block Clamp

375231354
KDS 4610-3001: RNCC: 2 | RNVC: 1
Q75011816: RNCC: 3 | RNVC: 2
Q75011816: RNCC: 5 | RNVC: 2

7 May 2012

5340-37-556-5186
Booster Piston

375565186
23A-43-13230: RNCC: 5 | RNVC: 1

31 Mar 2004

5340-37-522-7314
Mounting Bracket

375227314
KDS2350-4005: RNCC: 2 | RNVC: 1
A60073767: RNCC: 3 | RNVC: 2
A60073767: RNCC: 5 | RNVC: 2

22 Feb 2012

5340-37-516-8116
Mounting Bracket

375168116
60816589: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60816589: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-37-033-0787
Oil Ring

370330787
70924158: RNCC: 3 | RNVC: 2
5340-37-033-0787: RNCC: 3 | RNVC: 2
70924158: RNCC: 3 | RNVC: 2

11 Mar 1995

5340-37-515-2873
Mounting Plate

375152873
50146906: RNCC: 3 | RNVC: 2
50146906: RNCC: 5 | RNVC: 2

22 May 2008

5340-37-521-3722
Loop Clamp

375213722
KDS2350-4005: RNCC: 2 | RNVC: 1
A60072026: RNCC: 3 | RNVC: 2
A60072026: RNCC: 5 | RNVC: 2

30 May 2011

5340-37-505-4133
Mounting Bracket

375054133
KDS 2320-1004: RNCC: 2 | RNVC: 1
61250845: RNCC: 5 | RNVC: 9
61250845: RNCC: 5 | RNVC: 9

16 Nov 1998

5340-37-525-7478
Mounting Plate

375257478
F11.20374-2646: RNCC: 3 | RNVC: 2
11.20374-2646.A: RNCC: 5 | RNVC: 2

13 Mar 2013

5340-37-514-6401
Storage Plug

375146401
A60021390-2: RNCC: 3 | RNVC: 2
A60021390: RNCC: 5 | RNVC: 1
A60021390-2: RNCC: 5 | RNVC: 2

23 Jan 2008

5340-37-505-5411
Mounting Bracket

375055411
KDS 1510-1003: RNCC: 2 | RNVC: 1
81214229: RNCC: 5 | RNVC: 9
81214229-01: RNCC: 5 | RNVC: 9

20 Feb 1999

5340-37-525-6171
Loop Holder

375256171
R3313-151: RNCC: 3 | RNVC: 2

19 Feb 2013

5340-37-004-1199
Panel

370041199
KDS 4230-1001: RNCC: 2 | RNVC: 1
5340-97-004-1199: RNCC: 2 | RNVC: 2
4230-500-0000195: RNCC: 3 | RNVC: 2
4230-500-0000195: RNCC: 5 | RNVC: 9
4230-500-0000195: RNCC: 5 | RNVC: 9

23 Nov 1987

5340-37-505-6724
Mounting Bracket

375056724
KDS 2350-1024: RNCC: 2 | RNVC: 1
60359923: RNCC: 3 | RNVC: 2

30 Apr 1999

5340-37-522-7943
Access Cover

375227943
KDC 2010-T4001: RNCC: 2 | RNVC: 1
DSN1140-4707: RNCC: 3 | RNVC: 2

5 Mar 2012

5340-37-518-6842
Access Cover

375186842
61523110: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61523110: RNCC: 5 | RNVC: 2

28 Sep 2009

5340-37-523-9873
Threaded Rod End

375239873
KDC 1680-T4005: RNCC: 2 | RNVC: 1
A81025130-01: RNCC: 3 | RNVC: 2
A81025130-01: RNCC: 5 | RNVC: 2
A81025130: RNCC: D | RNVC: 9

6 Aug 2012

5340-37-525-6866
Mounting Plate

375256866
2/KDV12449/2: RNCC: 3 | RNVC: 2

4 Mar 2013

5340-37-524-0370
Double Angle Bracket

375240370
KDC 2995-T4002: RNCC: 2 | RNVC: 1
A81062340-01: RNCC: 3 | RNVC: 2
A81062340-01: RNCC: 5 | RNVC: 2
A81062340: RNCC: D | RNVC: 9

8 Aug 2012

5340-37-520-6687
Angle Bracket

375206687
85T7441-005: RNCC: 3 | RNVC: 2
85T7441-005: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-515-9232
Cushioning Pad

375159232
91028487: RNCC: 3 | RNVC: 2
91028487-03: RNCC: 5 | RNVC: 2

13 Oct 2008

5340-37-512-5560
Keyboard Support

375125560
85GA1420-029: RNCC: 3 | RNVC: 2
85GA1420-029: RNCC: 5 | RNVC: 2

9 Sep 2005

5340-37-506-0468
Runner

375060468
KDS 2350-1024: RNCC: 2 | RNVC: 1
60341298: RNCC: 3 | RNVC: 2

31 Jul 1999

5340-37-520-1231
Angle Bracket

375201231
85B1628-040: RNCC: 3 | RNVC: 2
85B1628-040: RNCC: 5 | RNVC: 2
85B1628-039: RNCC: D | RNVC: 9

12 Oct 2010

5340-37-518-0188
Mounting Plate

375180188
60822121: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60822121: RNCC: 5 | RNVC: 2

6 Jul 2009

5340-37-525-1839
Mounting Plate

375251839
91044833: RNCC: 3 | RNVC: 2
91044833: RNCC: 5 | RNVC: 2

10 Jan 2013

5340-37-513-9796
Mounting Bracket

375139796
Q55028547: RNCC: 3 | RNVC: 2
Q55028547: RNCC: 5 | RNVC: 2

28 Aug 2007

5340-37-513-0295
Detent Plunger

375130295
Q45023986: RNCC: 3 | RNVC: 2
Q45023986: RNCC: 5 | RNVC: 2

3 May 2006

5340-37-512-9930
Cover Housing

375129930
Q25025809: RNCC: 3 | RNVC: 2
Q25025809: RNCC: 5 | RNVC: 2

11 Apr 2006

5340-37-512-9710
Bracket Assembly

375129710
Q25025479: RNCC: 3 | RNVC: 2
Q25025479: RNCC: 5 | RNVC: 2

31 Mar 2006

5340-37-512-8429
Fron Plate Assembly

375128429
Q25024897: RNCC: 3 | RNVC: 2
Q25024897: RNCC: 5 | RNVC: 2

17 Feb 2006

5340-37-512-1620
Butt Hinge

375121620
81322319-03: RNCC: 3 | RNVC: 2
81322319: RNCC: 5 | RNVC: 1
81322319-03: RNCC: 5 | RNVC: 2

24 Jun 2005

5340-37-506-1026
Left Block

375061026
KDS 2350-1024: RNCC: 2 | RNVC: 1
20027152: RNCC: 3 | RNVC: 2

7 Aug 1999

5340-37-512-5967
Dust And Moisture Seal Protective Cover

375125967
FTC-85GA8310-015: RNCC: 3 | RNVC: 2
85VG8310-003: RNCC: 5 | RNVC: 1
FTC-85GA8310-015: RNCC: 5 | RNVC: 2

22 Sep 2005

5340-37-507-3243
Lower Flange

375073243
KDS 3950-3002: RNCC: 2 | RNVC: 1
95005968: RNCC: 3 | RNVC: 2
95005968: RNCC: 5 | RNVC: 2

31 Aug 2000

5340-37-506-1857
Angle Bracket

375061857
KDS 2350-1024: RNCC: 2 | RNVC: 1
60342072: RNCC: 3 | RNVC: 2

14 Aug 1999

5340-37-556-5007
Assy Lipte Piston

375565007
HC032-0052: RNCC: 5 | RNVC: 1

31 Mar 2004

5340-37-524-4669
Mounting Bracket

375244669
KDS 5855-4012: RNCC: 2 | RNVC: 1
A40007288: RNCC: 3 | RNVC: 2
A40007288: RNCC: 5 | RNVC: 2

19 Sep 2012

5340-37-515-6197
Section Block Clamp

375156197
NBL8-667-042: RNCC: 3 | RNVC: 2
NBL8-667-042: RNCC: 5 | RNVC: 2

1 Aug 2008

5340-37-507-0429
Mounting Bracket

375070429
KDS 2350-1024: RNCC: 2 | RNVC: 1
60356838: RNCC: 3 | RNVC: 2

6 Apr 2000

5340-37-516-3775
Lock-Release Lever

375163775
S20 2996 O: RNCC: 3 | RNVC: 2

14 Nov 2008

5340-37-527-0039
Butt Hinge

375270039
MDSI-B-2T: RNCC: 3 | RNVC: 2

2 Oct 2013

5340-37-502-3625
Mounting Bracket

375023625
KDS 2350-1024: RNCC: 2 | RNVC: 1
60300012: RNCC: 3 | RNVC: 2

24 Feb 1993

5340-37-501-9557
Angle Cover Plate

375019557
KDS 1010-1246: RNCC: 2 | RNVC: 1
20024423: RNCC: 3 | RNVC: 2

9 Aug 1991

5340-37-524-5336
Mounting Plate

375245336
60835079: RNCC: 3 | RNVC: 2

25 Sep 2012

5340-37-508-6002
Loop Clamp

375086002
Q65036850: RNCC: 3 | RNVC: 2

14 Feb 2002

5340-37-508-5396
Angle Bracket

375085396
Q65034991: RNCC: 3 | RNVC: 2

1 Feb 2002

5340-37-521-5989
Mechanical Stop

375215989
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81018438-02: RNCC: 3 | RNVC: 2
A81018438-02: RNCC: 5 | RNVC: 2
A81018438: RNCC: D | RNVC: 9

18 Jul 2011

5340-37-516-6478
Mounting Bracket

375166478
KDS 1510-1003: RNCC: 2 | RNVC: 1
81536355: RNCC: 3 | RNVC: 2
81536355-01: RNCC: 5 | RNVC: 2

4 Feb 2009

5340-37-520-8438
Mounting Bracket

375208438
KDS 1230-4003: RNCC: 2 | RNVC: 1
60828662: RNCC: 3 | RNVC: 2
60828662: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-37-160-1608
Double Angle Bracket

371601608
KDS 2320-1006: RNCC: 4 | RNVC: 1
65, 05610-0005: RNCC: 5 | RNVC: 9
2930-97-160-1608: RNCC: 5 | RNVC: 9

18 Oct 1989

5340-37-505-6309
Cushioning Pad

375056309
KDS 2350-1024: RNCC: 2 | RNVC: 1
60359167: RNCC: 3 | RNVC: 2
60359167-13: RNCC: 3 | RNVC: 2

13 Apr 1999

5340-37-521-1180
Mounting Bracket

375211180
VX70CK-001: RNCC: 3 | RNVC: 2

15 Apr 2011

5340-37-517-3205
Section Block Clamp

375173205
61533571: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61533571: RNCC: 5 | RNVC: 2

2 Jun 2009

5340-37-523-4376
Mounting Plate

375234376
A60078905: RNCC: 3 | RNVC: 2
A60078905: RNCC: 5 | RNVC: 2

12 Jun 2012

5340-37-517-3422
Packing

375173422
60250563-1: RNCC: 3 | RNVC: 2

4 Jun 2009

5340-37-506-3610
Cover

375063610
KDS 6920-3001: RNCC: 2 | RNVC: 1
29910138: RNCC: 3 | RNVC: 2
A29910138: RNCC: 3 | RNVC: 2

28 Aug 1999

5340-37-519-3525
T Bracket

375193525
85PF6731-803: RNCC: 3 | RNVC: 2
85PF6731-803: RNCC: 5 | RNVC: 2

18 Mar 2010

Load More Results