What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Push Door Plate?

A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.

What is a Thumb Latch?

A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

What is a Sliding Door Track?

A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.

A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).

A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.

What is a Door Button?

A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

What is a Strap End Clip?

A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

What is a Quick Release Plunger?

A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.

What is a Catch Strike?

A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.

What is a Mortise Latch?

A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.

What is a Flush Catch?

A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).

What is a Clamp Bolt Assembly?

A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.

What is a Retaining Band?

A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.

What is a Bow Handle?

A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.

What is a Recess Handle?

A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.

What is a Bail Handle?

A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.

What is a Double Angle Bracket?

A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.

What is a Strap Fastener Loop?

A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.

What is a Webbing Strap?

A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.

What is a Spring Tension Clip?

A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.

Hardware, Commercial - Korea (KR)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Korea (KR) - NCB is 37

Page 40 of 56

NSN Format for Hardware, Commercial
Codified by Korea

53	40	37	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Korea (KR)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 19 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 59 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 32 Items
Holder,Loop 25 Items
Holder,Spring 36 Items
What is a Rod End Connector? 58 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Rod End Clevis? 89 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is a Metal Grille? 15 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 15 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 145 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 25 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 20 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Push Door Plate? 12 Items: A Push Door Plate (PLATE,DOOR,PUSH) is a thin flat item of various shapes designed to be fastened to a door. When installed it protects the surface finish from soiling and/or wear. It may have the word PUSH on the surface to indicate the directional swing of the door.
What is a Thumb Latch? 14 Items: A Thumb Latch (LATCH,THUMB) is a latch in which the exposed working parts are mounted to the surface of a door or gate.
What is a Rim Latch? 16 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 11 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a Sliding Door Track? 13 Items: A Sliding Door Track (TRACK,SLIDING DOOR) is a fabricated form made of metal or plastic, which serves as a runway for a sliding door hanger and which is bolted directly to a structure or held by means of brackets.
What is a Doorknob? 12 Items: A Doorknob is a device designed to be attached to or through a door and consisting of a single protuberance which may be one of many rounded or angular shapes. It may or may not have a spindle and a rose. Excludes knob sets; LATCH (as modified) and LOCK SET (as modified).
What is a Tee Hinge? 11 Items: A Tee Hinge (HINGE,TEE) is a hinge whose general shape is like the letter T, with one leaf resembling that of a butt hinge, and the other that of a strap hinge. The hinge may also have both leaves resembling strap hinges or butt hinges of different widths.
What is a Door Button? 16 Items: A Door Button (BUTTON,DOOR) is a winglike device which is used for holding doors, sashes, screens, storm windows or the like in place.
What is a Butt Hinge Leaf? 45 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Mending Plate? 21 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 30 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Dust And Moisture Seal Protective Cap? 98 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 116 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 34 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 53 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 97 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 14 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Strap End Clip? 10 Items: A Strap End Clip (CLIP,END,STRAP) is an item designed to be attached to the end of a strap, belt, or the like, to provide a rigid end for convenient insertion into a buckle, keeper, loop and the like and/or restrict wear or unraveling of the strap end.
What is a Nut And Bolt Retainer? 12 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is an Angle Bracket? 1486 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is a Snap Hook? 10 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Loop Clamp? 304 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 20 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 53 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 26 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 45 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is a Mortise Latch? 13 Items: A Mortise Latch (LATCH,MORTISE) is a latch designed to be fitted into the edge of a door, drawer, or the like. The latch does not include knob(s), thumb piece(s), rose(s), strike(s), door pull(s), release bar(s), and the like.
What is a Flush Catch? 10 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Clamp Bolt Assembly? 26 Items: A Clamp Bolt Assembly (BOLT ASSEMBLY,CLAMP) is a threaded item having an eye on one end designed to accommodate a hinge pin, or a pin inserted at right angles to the shank. It must have an adjusting nut assembled on the threads. The end of the threads may be headed, or a cap nut or similar device attached to prevent disassembly of the adjusting nut. It may also have a washer, collar or retainer assembled between the nut and hinge mounted end. Includes items having a bracket or lug mounting. It is used to rigidly clamp items to a structure, instrument, or the like.
What is a Retaining Band? 76 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 234 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Recess Handle? 10 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 44 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 255 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 11 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Webbing Strap? 95 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 116 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 36 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 472 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 49 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is an Access Hole Frame? 14 Items: An Access Hole Frame (FRAME,ACCESS HOLE) is a rigid item designed to frame a structural opening for reinforcement purposes and/or to accommodate covers, access (as modified) and doors, access (as modified).
What is a Window Retaining Plate? 35 Items: A Window Retaining Plate (PLATE,RETAINING,WINDOW) is a comparatively flat rigid item, having a centrally located aperture, designed to hold a window in position in mechanical or optical instruments. It must have drilled and/or tapped holes for mounting purposes.
What is a Butt Hinge? 114 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 57 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is a Helical Compression Spring Seat? 18 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Clamping Catch? 40 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 42 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is an Extension Drawer Slide Section? 19 Items: An Extension Drawer Slide Section (SLIDE SECTION,DRAWER,EXTENSION) is an item specifically designed for use as a component of a SLIDE, DRAWER, EXTENSION. It may contain ball bearings, rollers, locking device(s), and mounting provisions.
What is a Vent Plug? 29 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 1435 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Threaded Rod End? 80 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
Handle,Extension 11 Items
What is a Manual Control Handle? 127 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Lever Bracket? 37 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Seal Retaining Plate? 33 Items: A Seal Retaining Plate (PLATE,RETAINING,SEAL) is a generally flat item varied in shape with or without a centrally located hole, designed to hold seals in place. It must have drilled and/or tapped holes for mounting purposes. Excludes COVER, ACCESS, SHIM and SPACER, PLATE. See also FLANGE (as modified).
What is a Block Clamp? 254 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 4187 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Section Block Clamp? 134 Items: A Section Block Clamp (CLAMP,BLOCK,SECTION) is a single piece of multipiece CLAMP, BLOCK. For items specifically designed to serve as a guide, see FAIRLEAD BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Beam Gripping Clamp? 13 Items: A Beam Gripping Clamp (CLAMP,BEAM GRIPPING) is a metallic clamp, designed for permanet installation, that grips the flange of a structural beam and facilitates the suspension of other objects. It is generally used in conjunction with a bracket or hanger to support cable, pipe, rods and the like. Excludes CLAMP, MATERIAL LIFTING.
What is a Mounting Plate? 2701 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Synchro Clamp? 57 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 118 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Snap-In Threaded Standoff? 11 Items: A Snap-In Threaded Standoff (STANDOFF,THREADED,SNAP-IN) is a standoff with one threaded end and projection on the other end which can be snapped, press fitted or locked into position.
What is a Spacing Threaded Standoff? 36 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 247 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 33 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Crank Handle? 12 Items: A Crank Handle (HANDLE,CRANK) is a metallic or nonmetallic item specifically designed to be attached to a ARM, HAND CRANK parallel to its axis for transmitting motion to a shaft or object.
What is a Runner? 23 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Track Stop? 13 Items: A Track Stop (STOP,TRACK) is a metallic or nonmetallic item of various shapes designed to be attached at the end of a track to prevent movement or action beyond a fixed point. It may include facilities for a pin, set screw, or the like to allow for adjustment. Excludes BUMPER.
What is an Angle Bracket Set? 30 Items: An Angle Bracket Set (BRACKET SET,ANGLE) is a pair of rigid metal items, fabricated from flat material formed to a 90 degree angle. It is designed to position, align, and/or support an item. For items which include mounting hardware such as washers, threaded screws, or other fastening devices, See HARDWARE KIT, ELECTRONIC EQUIPMENT.
What is a Masking Plate? 18 Items: A Masking Plate (PLATE,MASKING) is an item specifically designed for partially or completely obscuring information otherwise visible on another item. It may contain one or more observation slots. It may be moved by a rotary or straight-line motion to expose the information required. For instruments, see MASK, DIAL.
What is a Dust And Moisture Seal Protective Cover? 318 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is a Lock Bolt? 48 Items: A Lock Bolt (BOLT,LOCK) is an item that is the portion of a LOCK (as modified) which is designed to enter an adjoining cavity or notched rest, and is extended and/or withdrawn by a key, knob or spring action or any combination thereof. It is retained or secured in the extended position by tumblers, revolving plug, bars or the like.
What is a Sliding Block? 18 Items: A Sliding Block is a solid square item, usually of T-shaped cross-section, provided with two plane and parallel bearing surfaces. The item may have a threaded or unthreaded center hole and is designed for insertion into T-shaped grooves for alignment or fixing of parts. Excludes items used for alignment or fixing of workpieces, devices, clamping tools, etc., on machine tools. See SLIDING BLOCK, T-SLOT.
What is an Utility Access Door? 41 Items: An Utility Access Door (DOOR,ACCESS,UTILITY) is a rigid item of various shapes permanently attached to a structure, designed to provide access for inspection, service, replacement of components and/or adjustments. It is designed to be attached by means of hinges or similar devices. It may include self-closing features and have a quick release or other type latching to permit access with a minimum of effort. It may include an observation window. Excludes COVER, ACCESS and DOOR, ACCESS, WEAPON SYSTEM.
What is an Utility Resilient Mount? 25 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is a Shimmy Damper? 13 Items: A Shimmy Damper (DAMPER,SHIMMY) is a mechanism which retards or nullifies angular vibration between two items.
What is an Access Door Hinge? 124 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
What is a Door Holder? 21 Items: A Door Holder (HOLDER,DOOR) is a holder of various shapes and cross-sections designed to hold a door in the open position. It may be a manual type, or automatic and may include a release mechanism. It is designed to be mounted on the surface of a wall, or on the floor. The strike portion of the unit is mounted on the door, the remaining part is mounted on the wall, or floor. Excludes DOORSTOP.
What is a Resilient Mount Plate? 12 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 80 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is a Headless Grooved Rod? 11 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 91 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Locking Stay? 13 Items: A Locking Stay (STAY,LOCKING) is a device designed to support either a slotted (sliding action) or a hinged device to support in the unfolded or extended position. Commonly used to brace and/or lock into position such items as card table legs, chest lids, folding counters, desk tops and trunk lids.
What is a Lock Bar? 26 Items: A Lock Bar is a removable item designed to lock another item securely in place preventing movement, removal or theft.It can be formed in various shapes and sizes consisting of one or more parts usually made of steel, aluminium or the like having a hole(s) in it to install a PIN,QUICK RELEASE; PADLOCK or the like keeping it in position.
What is an Aircraft Latch Hook? 19 Items: An Aircraft Latch Hook (HOOK,LATCH,AIRCRAFT) is a component of a LATCH ASSEMBLY, AIRCRAFT designed to grip or lock into a mating piece when actuated by means of the latch handle.
What is a Bumper? 55 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 40 of 56

5340-37-522-0594
Mounting Plate

375220594
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81351405: RNCC: 3 | RNVC: 2
A81351405-01: RNCC: 3 | RNVC: 2
A81351405-01: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-37-504-8109
Rod End Clevis

375048109
KDS 2320-1023: RNCC: 2 | RNVC: 1
60381840: RNCC: 5 | RNVC: 9
60381840: RNCC: 5 | RNVC: 9

21 Oct 1997

5340-37-520-1072
Corner Brace

375201072
10301.0110.100.118: RNCC: 3 | RNVC: 2

6 Oct 2010

5340-37-506-5941
Loop Clamp

375065941
Q75012105: RNCC: 3 | RNVC: 2

2 Nov 1999

5340-37-523-3242
Mounting Bracket

375233242
60818396: RNCC: 3 | RNVC: 2
60818396: RNCC: 5 | RNVC: 2

30 May 2012

5340-37-512-8086
Cable Upper Support

375128086
Q25027150: RNCC: 3 | RNVC: 2
Q25027150: RNCC: 5 | RNVC: 2

6 Feb 2006

5340-37-505-8598
Bow Handle

375058598
Q45016241: RNCC: 3 | RNVC: 2

28 Jun 1999

5340-37-520-7949
Mounting Actuator Plate

375207949
A81053333: RNCC: 3 | RNVC: 2
A8105333301: RNCC: 3 | RNVC: 2
A8105333301: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-37-502-9223
Frame Assembly

375029223
60308946: RNCC: 3 | RNVC: 2

13 Jan 1997

5340-37-515-2884
Mounting Plate

375152884
50146914: RNCC: 3 | RNVC: 2
50146914: RNCC: 5 | RNVC: 2

23 May 2008

5340-37-518-5722
Angle Bracket

375185722
WF531876-01: RNCC: 3 | RNVC: 2

19 Aug 2009

5340-37-067-0281
Guide Assembly

370670281
5340-97-067-0281: RNCC: 5 | RNVC: 9

27 Sep 2001

5340-37-515-5900
Cap

375155900
PN43 1S.023: RNCC: 3 | RNVC: 2
PN43 1S.023: RNCC: 5 | RNVC: 2

28 Jul 2008

5340-37-507-1961
Support

375071961
20109164: RNCC: 5 | RNVC: 9

12 Jul 2000

5340-37-504-8015
Mounting Bracket

375048015
KDS 2320-1023: RNCC: 2 | RNVC: 1
60384338: RNCC: 5 | RNVC: 2
60384338: RNCC: 5 | RNVC: 9
60384338: RNCC: 5 | RNVC: 9

17 Oct 1997

5340-37-518-4664
Access Cover

375184664
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20012832: RNCC: 3 | RNVC: 2
A20012832: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-521-2670
Mounting Bracket

375212670
KDS 2350-4003: RNCC: 2 | RNVC: 1
61523414: RNCC: 3 | RNVC: 2
61523414: RNCC: 5 | RNVC: 2

6 May 2011

5340-37-511-7532
Multiple Angle Bracket

375117532
85PF9540-211: RNCC: 3 | RNVC: 2
85PF9540-212: RNCC: 3 | RNVC: 2
85PF9540-211: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-37-514-4369
Access Cover

375144369
KDS 1425-1001: RNCC: 2 | RNVC: 1
80040855: RNCC: 3 | RNVC: 2
80040855: RNCC: 5 | RNVC: 2

3 Dec 2007

5340-37-504-8342
Spring Tension Clip

375048342
KDS 2320-1023: RNCC: 2 | RNVC: 1
60381879: RNCC: 5 | RNVC: 9
60381879: RNCC: 5 | RNVC: 9

29 Oct 1997

5340-37-504-9523
Mounting Plate

375049523
60072437: RNCC: 3 | RNVC: 2
60072437: RNCC: 5 | RNVC: 2

15 Dec 1997

5340-37-502-4038
Angle Bracket

375024038
8031053: RNCC: 5 | RNVC: 9
80019415: RNCC: 5 | RNVC: 9

23 Apr 1993

5340-37-506-4171
Crank Handle

375064171
60343659: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-37-509-1917
Mounting Bracket

375091917
60630782: RNCC: 3 | RNVC: 2
60630782: RNCC: 3 | RNVC: 2

6 Sep 2002

5340-37-514-0989
Hinge

375140989
KDS 2320-4006: RNCC: 2 | RNVC: 1
A60017463: RNCC: 3 | RNVC: 2
A60017463: RNCC: 5 | RNVC: 2

29 Sep 2007

5340-37-504-0194
Wiper Arm Blade

375040194
3020-00470: RNCC: 3 | RNVC: 2

15 Apr 1996

5340-37-511-4706
Mounting Plate

375114706
Q55111595: RNCC: 3 | RNVC: 2
Q55111595: RNCC: 5 | RNVC: 2

5 Jan 2005

5340-37-519-1570
Loop Clamp

375191570
81362392: RNCC: 3 | RNVC: 2
81362392: RNCC: 5 | RNVC: 2

21 Jan 2010

5340-37-511-1260
Link Assembly

375111260
Q55606145: RNCC: 3 | RNVC: 2
Q55606145: RNCC: 5 | RNVC: 2

28 Aug 2004

5340-37-505-8555
Loop Clamp

375058555
KDS 1510-1003: RNCC: 2 | RNVC: 1
81326102: RNCC: 3 | RNVC: 2
81326102-01: RNCC: 5 | RNVC: 2

24 Jun 1999

5340-37-513-0025
Angle Bracket

375130025
Q25021598-1: RNCC: 3 | RNVC: 2
Q25021598: RNCC: 5 | RNVC: 1
Q25021598-1: RNCC: 5 | RNVC: 2

13 Apr 2006

5340-37-510-3377
Webbing Strap

375103377
81045613: RNCC: 2 | RNVC: 2
81045613: RNCC: 5 | RNVC: 9
81045613-01: RNCC: 5 | RNVC: 9

7 Jan 2004

5340-37-524-9315
Mounting Bracket

375249315
61528955: RNCC: 3 | RNVC: 2
61528955: RNCC: 5 | RNVC: 2

29 Nov 2012

5340-37-511-3267
Ground Plate

375113267
40017233: RNCC: 3 | RNVC: 2
40017233: RNCC: 5 | RNVC: 2

3 Nov 2004

5340-37-114-0645

5340-37-134-3935

5340-37-521-6875
Lever Bracket

375216875
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81024316-01: RNCC: 3 | RNVC: 2
A81024316-01: RNCC: 5 | RNVC: 2
A81024316: RNCC: D | RNVC: 9

29 Jul 2011

5340-37-526-0049
Access Cover

375260049
KDS 2350-4008: RNCC: 2 | RNVC: 2
A60075751: RNCC: 5 | RNVC: 2
A60075751: RNCC: D | RNVC: 9

9 Apr 2013

5340-37-524-7431
Mounting Bracket

375247431
N51008497: RNCC: 3 | RNVC: 2
N51008497: RNCC: 5 | RNVC: 2

25 Oct 2012

5340-37-502-6151
Mounting Bracket

375026151
60080101: RNCC: 3 | RNVC: 2

11 Mar 1994

5340-37-511-1114
Cushioning Pad

375111114
60671489: RNCC: 3 | RNVC: 2
60671489-3: RNCC: 5 | RNVC: 2

25 Aug 2004

5340-37-509-9945
Mounting Bracket

375099945
82911306: RNCC: 3 | RNVC: 2
82911306-01: RNCC: 5 | RNVC: 2

18 Aug 2003

5340-37-519-1619
Access Cover

375191619
81362572: RNCC: 3 | RNVC: 2
81362572: RNCC: 5 | RNVC: 2

21 Jan 2010

5340-37-508-0408
Access Door Hinge

375080408
80267106: RNCC: 5 | RNVC: 2

11 Sep 2001

5340-37-508-3105
Mounting Bracket

375083105
95008100: RNCC: 3 | RNVC: 2

28 Nov 2001

5340-37-504-4392
Outer Beari Housing

375044392
60042611: RNCC: 3 | RNVC: 2

17 Oct 1996

5340-37-519-1328
Mounting Plate

375191328
WF535463-02: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-526-4834
Lever Bracket

375264834
A81025410-01: RNCC: 5 | RNVC: 2
A81025410: RNCC: D | RNVC: 9

23 Jul 2013

5340-37-526-3766
Access Cover

375263766
3771644: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-37-506-0620
Access Cover

375060620
KDS 2350-1024: RNCC: 2 | RNVC: 1
60342151: RNCC: 3 | RNVC: 2

31 Jul 1999

5340-37-521-8626
Mounting Bracket

375218626
KDS 2350-4003: RNCC: 2 | RNVC: 1
61531323: RNCC: 3 | RNVC: 2
61531323: RNCC: 5 | RNVC: 2

19 Sep 2011

5340-37-507-4686
Dust And Moisture Seal Protective Cap

375074686
KDS 5820-3002: RNCC: 2 | RNVC: 1
Q55104477: RNCC: 3 | RNVC: 2

1 Nov 2000

5340-37-511-1030
Cushion Assembly

375111030
60443603: RNCC: 3 | RNVC: 2
60443603: RNCC: 5 | RNVC: 2

21 Aug 2004

5340-37-519-6005
Access Cover

375196005
A20013914: RNCC: 3 | RNVC: 2
A20013914: RNCC: 5 | RNVC: 2

11 Jun 2010

5340-37-521-8006
Handle Grip

375218006
KSB1334-1-ROT-13-STS: RNCC: 2 | RNVC: 2
KSB1334: RNCC: 4 | RNVC: 1
KSB1334-1-ROT-13-STS: RNCC: 5 | RNVC: 2

6 Sep 2011

5340-37-504-8744
Fa Bracket Assembly

375048744
KDS 2320-1023: RNCC: 2 | RNVC: 1
60379545: RNCC: 5 | RNVC: 9
60379545: RNCC: 5 | RNVC: 9

8 Nov 1997

5340-37-512-0241
Mounting Bracket

375120241
50125290: RNCC: 3 | RNVC: 2
50125290: RNCC: 5 | RNVC: 2

31 May 2005

5340-37-511-0535
Angle Bracket

375110535
Q25020645: RNCC: 3 | RNVC: 2
25020645: RNCC: 5 | RNVC: 2

8 Aug 2004

5340-37-515-9485
Mounting Plate

375159485
91025721: RNCC: 3 | RNVC: 2
91025721: RNCC: 5 | RNVC: 2

20 Oct 2008

5340-37-504-4238
Bracket

375044238
61229771: RNCC: 5 | RNVC: 9
61229771: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-37-505-0755
Bail Handle

375050755
50106935: RNCC: 3 | RNVC: 2

21 Mar 1998

5340-37-511-7534
Multiple Angle Bracket

375117534
85PF9550-241: RNCC: 3 | RNVC: 2
85PF9550-241: RNCC: 3 | RNVC: 2

30 Mar 2005

5340-37-520-7995
Manual Control Lever

375207995
A81025222: RNCC: 3 | RNVC: 2
A81025222-01: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-37-519-9935
Mounting Bracket

375199935
KDS 1510-4002: RNCC: 2 | RNVC: 1
85B1851-013: RNCC: 3 | RNVC: 2
85B1851-013: RNCC: 5 | RNVC: 2

14 Sep 2010

5340-37-505-4054
Butt Hinge Leaf

375054054
60309003: RNCC: 3 | RNVC: 2

12 Nov 1998

5340-37-512-0830
Block Clamp

375120830
50125751: RNCC: 3 | RNVC: 2
50125751: RNCC: 5 | RNVC: 2

9 Jun 2005

5340-37-526-3203
Mounting Bracket

375263203
81079788: RNCC: 3 | RNVC: 2
81079788: RNCC: 5 | RNVC: 2

5 Jul 2013

5340-37-506-9620
Manual Control Handle

375069620
95002600: RNCC: 3 | RNVC: 2

24 Feb 2000

5340-37-511-1525
Hopper Cover

375111525
60444966: RNCC: 3 | RNVC: 2
60444966: RNCC: 5 | RNVC: 2

3 Sep 2004

5340-37-501-5645
Mounting Bracket

375015645
60773416: RNCC: 3 | RNVC: 2
60773416: RNCC: 5 | RNVC: 2

10 Apr 1990

5340-37-512-3019
Mounting Bracket

375123019
AD50000048: RNCC: 3 | RNVC: 2
AD50000048: RNCC: 5 | RNVC: 2

19 Jul 2005

5340-37-512-7186
Dust And Moisture Seal Protective Cover

375127186
80017882: RNCC: 3 | RNVC: 2
80017882: RNCC: 5 | RNVC: 2

14 Nov 2005

5340-37-500-3001
Latch Guide

375003001
60610132: RNCC: 5 | RNVC: 9

15 Jun 1989

5340-37-504-3862
Mounting Plate

375043862
50096599: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-37-525-2268
Mounting Bracket

375252268
Q65800090: RNCC: D | RNVC: 9

14 Jan 2013

5340-37-504-2959
Cushioning Pad

375042959
60042158: RNCC: 3 | RNVC: 2
VDS26188: RNCC: 5 | RNVC: 2

15 Oct 1996

5340-37-522-0005
Angle Bracket

375220005
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81003365-01: RNCC: 3 | RNVC: 2
A81003365: RNCC: 3 | RNVC: 2
A81003365-01: RNCC: 5 | RNVC: 2

1 Nov 2011

5340-37-521-5069
Access Cover

375215069
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81008395: RNCC: 3 | RNVC: 2
A81008395-01: RNCC: 5 | RNVC: 2

29 Jun 2011

5340-37-506-2223
Mounting Plate

375062223
KDS 1230-1014: RNCC: 2 | RNVC: 1
60376003: RNCC: 3 | RNVC: 2

17 Aug 1999

5340-37-513-4580
Mechanical Stop

375134580
7821-4034: RNCC: 3 | RNVC: 2

30 Jan 2007

5340-37-556-4817
Clamp

375564817
60313807: RNCC: 5 | RNVC: 1

30 Mar 2004

5340-37-519-3444
Window Retaining Plate

375193444
85E2804-807: RNCC: 3 | RNVC: 2
85E2804-807: RNCC: 5 | RNVC: 2

18 Mar 2010

5340-37-521-9691
Section Block Clamp

375219691
KDS 2350-4003: RNCC: 2 | RNVC: 1
61532593: RNCC: 3 | RNVC: 2
61532593: RNCC: 5 | RNVC: 2

18 Oct 2011

5340-37-516-1205
Shock Mount Pad

375161205
Q25022674: RNCC: 3 | RNVC: 2
Q25022674: RNCC: 5 | RNVC: 2

22 Oct 2008

5340-37-513-0500
Supporting Fitting

375130500
85GA7542-003: RNCC: 3 | RNVC: 2
85GA7542-003: RNCC: 5 | RNVC: 2

12 May 2006

5340-37-516-1084

5340-37-516-5772

5340-37-511-6266
Angle Bracket

375116266
85Y9801-117: RNCC: 3 | RNVC: 2
85Y9801-117: RNCC: 5 | RNVC: 2

5 Mar 2005

5340-37-004-1466
Plate

370041466
KDS 4230-1001: RNCC: 2 | RNVC: 1
5340-97-004-1466: RNCC: 2 | RNVC: 2

23 Nov 1987

5340-37-522-0214
Mortise Latch

375220214
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81506319-02: RNCC: 3 | RNVC: 2
A81506319-02: RNCC: 5 | RNVC: 2
A81506319: RNCC: D | RNVC: 9

1 Nov 2011

5340-37-505-5023
Angle Bracket

375055023
KDS 1510-1003: RNCC: 2 | RNVC: 1
81263312-01: RNCC: 3 | RNVC: 2
81263312: RNCC: 5 | RNVC: 9

4 Feb 1999

5340-37-518-4218
Mounting Plate

375184218
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20011029: RNCC: 3 | RNVC: 2
A20011029: RNCC: 5 | RNVC: 2

29 Jul 2009

5340-37-515-5982
Thrust

375155982
PK432.021: RNCC: 3 | RNVC: 2
PK432.021: RNCC: 5 | RNVC: 2

30 Jul 2008

5340-37-510-8852
Dust And Moisture Seal Protective Plug

375108852
70019368: RNCC: 3 | RNVC: 2
70019368: RNCC: 5 | RNVC: 2

10 Jul 2004

5340-37-519-5686
Lock Bar

375195686
A20008745: RNCC: 3 | RNVC: 2
A20008745: RNCC: 5 | RNVC: 2

4 Jun 2010

5340-37-520-6468
Lock Bolt

375206468
A20018008: RNCC: 3 | RNVC: 2
A20018008: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-519-9836
Mounting Plate

375199836
A20013855: RNCC: 3 | RNVC: 2
A20013855: RNCC: 5 | RNVC: 2

8 Sep 2010

5340-37-520-6397
Mounting Bracket

375206397
A20017804: RNCC: 3 | RNVC: 2
A20017804: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-522-8745
Mounting Plate

375228745
50139719: RNCC: 3 | RNVC: 2
50139719: RNCC: 5 | RNVC: 2

21 Mar 2012

5340-37-523-4511
Mounting Bracket

375234511
A60078954: RNCC: 3 | RNVC: 2
A60078954: RNCC: 5 | RNVC: 2

13 Jun 2012

5340-37-526-1587
Dust And Moisture Seal Protective Plug

375261587
985-6871: RNCC: 3 | RNVC: 2

31 May 2013

5340-37-504-7928
Mounting Bracket

375047928
KDS 2320-1023: RNCC: 2 | RNVC: 1
60380074: RNCC: 5 | RNVC: 9
60380074: RNCC: 5 | RNVC: 9

14 Oct 1997

5340-37-522-0529
Angle Bracket

375220529
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81063366-03: RNCC: 3 | RNVC: 2
A81063366: RNCC: 3 | RNVC: 2
A81063366-03: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-37-005-4591
Hyd-Filter Ring

370054591
KDS 2520-1369: RNCC: 2 | RNVC: 1
5340-97-005-4591: RNCC: 2 | RNVC: 2
2520-1369: RNCC: 3 | RNVC: 2
2520-1369: RNCC: 3 | RNVC: 2
70632063: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-200-6951

5340-37-516-5934

5340-37-510-5312
Access Cover

375105312
80074225: RNCC: 3 | RNVC: 2
80074225: RNCC: 5 | RNVC: 9

26 Mar 2004

5340-37-524-1636
Middle Cable Cover

375241636
A60079200: RNCC: 3 | RNVC: 2
A60079200: RNCC: 5 | RNVC: 2

16 Aug 2012

5340-37-523-4360
Plate-Cusion Assemb

375234360
A60078051: RNCC: 3 | RNVC: 2
A60078051: RNCC: 5 | RNVC: 2

12 Jun 2012

5340-37-518-4704
Mounting Bracket

375184704
KDS 1015-4008: RNCC: 2 | RNVC: 1
A20013356: RNCC: 3 | RNVC: 2
A20013356: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-502-5449
Mounting Block

375025449
60077807: RNCC: 3 | RNVC: 2

29 Nov 1993

5340-37-523-7968
Dust And Moisture Seal Protective Plug

375237968
91034207: RNCC: 3 | RNVC: 2
91034207: RNCC: 5 | RNVC: 2

19 Jul 2012

5340-37-515-9534
Mounting Bracket

375159534
91030031: RNCC: 3 | RNVC: 2
91030031: RNCC: 5 | RNVC: 2

20 Oct 2008

5340-37-523-9017
Cushioning Pad

375239017
61527140-2: RNCC: 3 | RNVC: 2

30 Jul 2012

5340-37-500-3074
Access Cover

375003074
60639019-2: RNCC: 5 | RNVC: 9

26 Jun 1989

5340-37-515-5864
Dust And Moisture Seal Protective Plug

375155864
BRASS,L=25 X D=17 X 11: RNCC: 3 | RNVC: 2

28 Jul 2008

5340-37-518-5955
Shimmy Damper

375185955
WF537462-01: RNCC: 3 | RNVC: 2

24 Aug 2009

5340-37-517-0697
Access Cover

375170697
61513843: RNCC: 3 | RNVC: 2
KDS 5895-4047: RNCC: 4 | RNVC: 1
61513843: RNCC: 5 | RNVC: 2

24 Apr 2009

5340-37-501-9688
Detent Plunger

375019688
KDS 1010-1246: RNCC: 2 | RNVC: 1
20024613: RNCC: 3 | RNVC: 2

26 Aug 1991

5340-37-516-2384
Mounting Bracket

375162384
85D2121-003: RNCC: 3 | RNVC: 2
85D2121-003: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-37-520-7935
Double Angle Bracket

375207935
A81047316: RNCC: 3 | RNVC: 2
A8104731601: RNCC: 3 | RNVC: 2
A8104731601: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-37-504-2696
Access Door Hinge

375042696
60470155: RNCC: 5 | RNVC: 9
60470155: RNCC: 5 | RNVC: 9

12 Aug 1996

5340-37-522-0154
Section Block Clamp

375220154
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81055310: RNCC: 3 | RNVC: 2
A81055310-01: RNCC: 3 | RNVC: 2
A81055310-01: RNCC: 5 | RNVC: 2

1 Nov 2011

5340-37-511-6841
Double Angle Bracket

375116841
85Y6091-015: RNCC: 3 | RNVC: 2
85Y6091-015: RNCC: 5 | RNVC: 2

18 Mar 2005

5340-37-520-0566
Mounting Plate

375200566
85B1642-024: RNCC: 3 | RNVC: 2
85B1642-024: RNCC: 5 | RNVC: 2

28 Sep 2010

5340-37-519-0256
Dust And Moisture Seal Protective Cover

375190256
A60019703: RNCC: 3 | RNVC: 2
A60019703: RNCC: 5 | RNVC: 2

9 Dec 2009

5340-37-512-2889
Water- Rubber Plate

375122889
Q65075603: RNCC: 3 | RNVC: 2
Q65075603: RNCC: 3 | RNVC: 2

18 Jul 2005

5340-37-510-6942
Mounting Bracket

375106942
70019812: RNCC: 3 | RNVC: 2
70019812: RNCC: 5 | RNVC: 2

30 Apr 2004

5340-37-519-8748
Detent Plunger

375198748
A20010812: RNCC: 3 | RNVC: 2
A20010812: RNCC: 5 | RNVC: 2

23 Aug 2010

5340-37-510-7879
Mounting Bracket

375107879
60575484: RNCC: 3 | RNVC: 2
60575484: RNCC: 3 | RNVC: 2

18 Jun 2004

5340-37-507-7443
Block Clamp

375077443
Q55601557: RNCC: 5 | RNVC: 9

21 Mar 2001

5340-37-502-7906
Section Block Clamp

375027906
60086711: RNCC: 3 | RNVC: 2

13 Jul 1994

5340-37-512-7915
Cushioning Pad

375127915
Q25028549-4: RNCC: 3 | RNVC: 2
Q25028549-4: RNCC: 5 | RNVC: 2
Q25028549: RNCC: D | RNVC: 9

12 Dec 2005

5340-37-517-3002
Access Cover

375173002
A60022482: RNCC: 3 | RNVC: 2
A60022482: RNCC: 5 | RNVC: 2

29 May 2009

5340-37-501-1973
Bracket Assembly

375011973
60721068: RNCC: 3 | RNVC: 2
60721068: RNCC: 5 | RNVC: 2

17 Dec 1988

5340-37-518-4856
Roller Holder

375184856
WF533682-01: RNCC: 3 | RNVC: 2

5 Aug 2009

5340-37-526-5713
Mounting Bracket

375265713
WB13-M03: RNCC: 3 | RNVC: 2

2 Aug 2013

5340-37-502-8142
Angle Bracket

375028142
60088363: RNCC: 3 | RNVC: 2

9 Aug 1994

5340-37-521-6038
Track Stop

375216038
KDS5855-4012: RNCC: 2 | RNVC: 1
A40008470: RNCC: 3 | RNVC: 2
A40008470: RNCC: 5 | RNVC: 2

19 Jul 2011

5340-37-523-7743
Burster Guide Guide

375237743
A60080023: RNCC: 3 | RNVC: 2
A60080023: RNCC: 5 | RNVC: 2

18 Jul 2012

5340-37-521-2708
Mounting Bracket

375212708
KDS 2350-4003: RNCC: 2 | RNVC: 1
61529510: RNCC: 3 | RNVC: 2
61529510: RNCC: 5 | RNVC: 2

6 May 2011

5340-37-520-1503
Mounting Bracket

375201503
A80026084-01: RNCC: 3 | RNVC: 2
A80026084-01: RNCC: 5 | RNVC: 2
A80026084: RNCC: D | RNVC: 9

21 Oct 2010

5340-37-520-9640
Masking Plate

375209640
A20006129: RNCC: 3 | RNVC: 2
A20006129: RNCC: 5 | RNVC: 2

16 Mar 2011

5340-37-524-0113
Wrist Rest Assembly

375240113
60829470: RNCC: 3 | RNVC: 2
60829470: RNCC: 5 | RNVC: 2

7 Aug 2012

5340-37-517-5958
Butt Hinge

375175958
60824978: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60824978: RNCC: 5 | RNVC: 2

19 Jun 2009

5340-37-506-7500
Butt Hinge

375067500
KDS 1510-4001: RNCC: 2 | RNVC: 1
81575880: RNCC: 5 | RNVC: 9
81575880-01: RNCC: 5 | RNVC: 9

2 Dec 1999

5340-37-502-6045
Access Cover

375026045
60074156: RNCC: 3 | RNVC: 2

4 Mar 1994

5340-37-514-9600
Mounting Bracket

375149600
91025753: RNCC: 3 | RNVC: 2
91025753: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-37-511-1151
Cushioning Pad

375111151
60671490: RNCC: 3 | RNVC: 2
60671490-4: RNCC: 5 | RNVC: 2

25 Aug 2004

5340-37-523-4638
Link

375234638
A60078947-1: RNCC: 3 | RNVC: 2
A60078947-1: RNCC: 5 | RNVC: 2
A60078947: RNCC: D | RNVC: 9

14 Jun 2012

5340-37-511-9908
Block Clamp

375119908
85GA4363-031: RNCC: 3 | RNVC: 2
85GA4363-031: RNCC: 5 | RNVC: 2

23 May 2005

5340-37-515-9196
Mechanical Stop

375159196
91031298: RNCC: 3 | RNVC: 2
91031298: RNCC: 5 | RNVC: 2

13 Oct 2008

5340-37-516-7249
Angle Bracket

375167249
81046903: RNCC: 3 | RNVC: 2
81046903: RNCC: 5 | RNVC: 2

26 Feb 2009

5340-37-526-2490
Access Cover

375262490
81091787: RNCC: 3 | RNVC: 2
81091787: RNCC: 5 | RNVC: 2

17 Jun 2013

5340-37-500-2788
Angle Bracket

375002788
60648037: RNCC: 5 | RNVC: 2
60648037: RNCC: 5 | RNVC: 9

14 Jun 1989

5340-37-524-1226
Mounting Bracket

375241226
D60839184: RNCC: 3 | RNVC: 2

13 Aug 2012

5340-37-505-7236
Dust And Moisture Seal Protective Cap

375057236
KDS 2350-1024: RNCC: 2 | RNVC: 1
60349778: RNCC: 3 | RNVC: 2

19 May 1999

5340-37-509-4055
Mounting Bracket

375094055
60646125: RNCC: 3 | RNVC: 2
60646125: RNCC: 3 | RNVC: 2
2520-37-A13-4372: RNCC: 5 | RNVC: 2

4 Dec 2002

5340-37-521-8684
Access Cover

375218684
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81241111: RNCC: 3 | RNVC: 2
A81241111-01: RNCC: 5 | RNVC: 2

20 Sep 2011

5340-37-525-0538
Mounting Bracket

375250538
KDS 5865-4008: RNCC: 2 | RNVC: 1
50161994: RNCC: 3 | RNVC: 2
50161994: RNCC: 5 | RNVC: 2

18 Dec 2012

5340-37-511-7936
Access Door Hinge

375117936
85S2332-013: RNCC: 3 | RNVC: 2
85S2332-013: RNCC: 5 | RNVC: 2

7 Apr 2005

5340-37-520-7831
Access Cover

375207831
A81041101: RNCC: 3 | RNVC: 2
A8104110101: RNCC: 3 | RNVC: 2
A8104110101: RNCC: 5 | RNVC: 2

10 Feb 2011

5340-37-523-5144
Mounting Bracket

375235144
A60079756: RNCC: 3 | RNVC: 2
A60079756: RNCC: 5 | RNVC: 2

21 Jun 2012

5340-37-508-0875
Fitting

375080875
80266741: RNCC: 5 | RNVC: 2

25 Sep 2001

5340-37-520-6380
Mounting Plate

375206380
A20017766: RNCC: 3 | RNVC: 2
A20017766: RNCC: 5 | RNVC: 2

12 Jan 2011

5340-37-503-1693
Angle Bracket

375031693
KDS 3805-1024: RNCC: 2 | RNVC: 1
60312812: RNCC: 3 | RNVC: 2

6 Dec 1994

5340-37-523-9020
Cushioning Pad

375239020
61527142-2: RNCC: 3 | RNVC: 2

30 Jul 2012

5340-37-523-7107
Tee Hinge

375237107
60818102: RNCC: 3 | RNVC: 2
60818102: RNCC: 5 | RNVC: 2

13 Jul 2012

5340-37-510-5615
Multiple Angle Bracket

375105615
Q65050290: RNCC: 2 | RNVC: 2
Q65050290: RNCC: 3 | RNVC: 2

1 Apr 2004

5340-37-507-8602
Mounting Bracket

375078602
80260570: RNCC: 3 | RNVC: 2
80260570: RNCC: 5 | RNVC: 2

14 Jun 2001

5340-37-519-0029
Mounting Plate

375190029
60835082: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60835082: RNCC: 5 | RNVC: 2

9 Dec 2009

5340-37-515-0137
Mounting Plate

375150137
50138794: RNCC: 3 | RNVC: 1
50138794-02: RNCC: 3 | RNVC: 2
50138794-02: RNCC: 5 | RNVC: 2

12 Apr 2008

5340-37-506-3328
Angle Bracket

375063328
KDS 1425-1001: RNCC: 2 | RNVC: 1
80041621: RNCC: 5 | RNVC: 9

25 Aug 1999

5340-37-506-8542
Shock Mount Pad

375068542
KDS 2350-1024: RNCC: 2 | RNVC: 1
60340226: RNCC: 3 | RNVC: 2

20 Jan 2000

5340-37-526-0256
Thumb Latch

375260256
KDS 2350-4008: RNCC: 2 | RNVC: 2
A60075455: RNCC: 5 | RNVC: 2
A60075455: RNCC: D | RNVC: 9

15 Apr 2013

5340-37-525-4823
Mounting Bracket

375254823
91044777: RNCC: 3 | RNVC: 2
91044777: RNCC: 5 | RNVC: 2

31 Jan 2013

5340-37-516-2223
Mounting Plate

375162223
83002342: RNCC: 3 | RNVC: 2
83002342: RNCC: 5 | RNVC: 2

4 Nov 2008

5340-37-522-4090
Mounting Bracket

375224090
50138762: RNCC: 3 | RNVC: 2
50138762: RNCC: 5 | RNVC: 2

27 Dec 2011

5340-37-526-9005
Mounting Bracket

375269005
81079622: RNCC: 3 | RNVC: 2
81079622: RNCC: 5 | RNVC: 2

11 Sep 2013

5340-37-512-5025
Angle Bracket

375125025
Q65061492: RNCC: 3 | RNVC: 2
Q65061492: RNCC: 3 | RNVC: 2

1 Sep 2005

5340-37-518-8332
Mounting Bracket

375188332
60816397: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60816397: RNCC: 5 | RNVC: 2

16 Nov 2009

5340-37-509-9516
Mounting Bracket

375099516
KDS 1510-4001: RNCC: 2 | RNVC: 1
82391215: RNCC: 5 | RNVC: 9
82391215-01: RNCC: 5 | RNVC: 9
82391215: RNCC: 5 | RNVC: 9
82391215-01: RNCC: 5 | RNVC: 9

7 Aug 2003

5340-37-505-7703
Extension Drawer Slide

375057703
Q45016368: RNCC: 3 | RNVC: 2

1 Jun 1999

5340-37-526-5797
Mounting Bracket

375265797
81077621: RNCC: 3 | RNVC: 2
81077621: RNCC: 5 | RNVC: 2

5 Aug 2013

5340-37-526-4567
Blank Panel

375264567
A90028148: RNCC: 3 | RNVC: 2
A90028148: RNCC: 5 | RNVC: 2

23 Jul 2013

5340-37-524-3310
Mounting Plate

375243310
KDS 5880-4001: RNCC: 2 | RNVC: 1
A40001876: RNCC: 3 | RNVC: 2
A40001876: RNCC: 5 | RNVC: 2

29 Aug 2012

5340-37-511-9556
Multiple Angle Bracket

375119556
85L1204-303: RNCC: 3 | RNVC: 2
85L1204-303: RNCC: 5 | RNVC: 2

12 May 2005

5340-37-521-0338
Mounting Bracket

375210338
A81009430: RNCC: 3 | RNVC: 2
A81009430-01: RNCC: 3 | RNVC: 2
A81009430-01: RNCC: 5 | RNVC: 2

29 Mar 2011

5340-37-520-0373
Mounting Bracket

375200373
KDS-1015-4003: RNCC: 2 | RNVC: 2
A20013023: RNCC: 3 | RNVC: 2
A20013023: RNCC: 5 | RNVC: 2

27 Sep 2010

5340-37-200-4229

5340-37-160-1449

5340-37-508-4088
Mounting Bracket

375084088
95007850: RNCC: 3 | RNVC: 2

18 Dec 2001

5340-37-507-7830
Mounting Bracket

375077830
60332939: RNCC: 3 | RNVC: 2
60332939: RNCC: 5 | RNVC: 2

13 Apr 2001

5340-37-500-6465
Spring Tension Clip

375006465
50068083: RNCC: 5 | RNVC: 9
50068083: RNCC: 5 | RNVC: 9

16 Aug 1990

5340-37-526-1567
Mounting Plate

375261567
91027114: RNCC: 3 | RNVC: 2
91027114: RNCC: 5 | RNVC: 2

31 May 2013

5340-37-525-7389
Mounting Plate

375257389
N51006160: RNCC: 3 | RNVC: 2
N51006160: RNCC: 5 | RNVC: 2

12 Mar 2013

5340-37-519-2788
Mounting Plate

375192788
81364266: RNCC: 3 | RNVC: 2
81364266: RNCC: 5 | RNVC: 2

5 Mar 2010

5340-37-516-8394
Detent Plunger

375168394
20030776: RNCC: 3 | RNVC: 2
20030776: RNCC: 5 | RNVC: 2

23 Mar 2009

5340-37-512-9264
Guide

375129264
Q25027583: RNCC: 3 | RNVC: 2
Q25027583: RNCC: 5 | RNVC: 2

16 Mar 2006

5340-37-514-9577
Bottom Panel

375149577
50145271: RNCC: 3 | RNVC: 2
50145271: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-37-523-7026
Mounting Plate

375237026
60822235: RNCC: 3 | RNVC: 2
60822235: RNCC: 5 | RNVC: 2

13 Jul 2012

5340-37-515-8980
Protection Cover

375158980
A40003785: RNCC: 3 | RNVC: 2
A40003785: RNCC: 5 | RNVC: 2

13 Oct 2008

5340-37-515-2773
Side Cover

375152773
50136153: RNCC: 3 | RNVC: 2
50136153: RNCC: 5 | RNVC: 2

20 May 2008

5340-37-507-2144
Access Cover

375072144
20110420: RNCC: 5 | RNVC: 9

27 Jul 2000

5340-37-505-5138
Mounting Bracket

375055138
KDS 1510-4001: RNCC: 2 | RNVC: 1
81271205: RNCC: 3 | RNVC: 2
81271205-01: RNCC: 5 | RNVC: 2

9 Feb 1999

5340-37-520-0586
Beam Gripping Clamp

375200586
A20006189: RNCC: 5 | RNVC: 2
A20006189: RNCC: D | RNVC: 9

29 Sep 2010

5340-37-511-4499
Angle Support

375114499
Q55111464: RNCC: 3 | RNVC: 2
Q55111464: RNCC: 5 | RNVC: 2

28 Dec 2004

5340-37-511-4044
Mounting Plate

375114044
Q65071322-C: RNCC: 3 | RNVC: 2
Q65071322: RNCC: 5 | RNVC: 1
Q65071322-C: RNCC: 5 | RNVC: 2

8 Dec 2004

5340-37-511-7679
Angle Bracket

375117679
85K1204-003: RNCC: 3 | RNVC: 2
85K1204-003: RNCC: 5 | RNVC: 2

31 Mar 2005

5340-37-524-2763
Fan Mount Panel

375242763
91038183-04: RNCC: 3 | RNVC: 2

27 Aug 2012

5340-37-503-8584
Access Cover

375038584
KDS 1270-1002: RNCC: 2 | RNVC: 1
92011543: RNCC: 5 | RNVC: 9

26 Feb 1996

5340-37-514-2228
Mounting Bracket

375142228
KDS 1270-1002: RNCC: 2 | RNVC: 1
A90008257: RNCC: 3 | RNVC: 2
A90008257: RNCC: 5 | RNVC: 2

5 Nov 2007

5340-37-518-7949
Mounting Plate

375187949
60816227: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60816227: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-512-5680
Small Cover

375125680
85GA7125-017: RNCC: 3 | RNVC: 2
85GA7125-001: RNCC: 5 | RNVC: 1
85GA7125-017: RNCC: 5 | RNVC: 2

9 Sep 2005

5340-37-514-9580
Mounting Plate

375149580
50144952: RNCC: 3 | RNVC: 2
50144952: RNCC: 5 | RNVC: 2

3 Apr 2008

5340-37-514-3257
Bail Handle

375143257
50141534: RNCC: 3 | RNVC: 2
501415341: RNCC: 5 | RNVC: 2

20 Nov 2007

5340-37-526-8995
Mounting Bracket

375268995
81078140: RNCC: 3 | RNVC: 2
81078140: RNCC: 5 | RNVC: 2

11 Sep 2013

5340-37-527-2871
Mounting Bracket

375272871
DNI0802F006: RNCC: 3 | RNVC: 2

25 Oct 2013

5340-37-503-4581
Angle Bracket

375034581
60623148: RNCC: 5 | RNVC: 9

27 Jul 1995

5340-37-518-2839
Support Plate

375182839
99 9999-092: RNCC: 5 | RNVC: 2

24 Jul 2009

5340-37-526-5771
Mounting Bracket

375265771
81079676: RNCC: 3 | RNVC: 2
81079676: RNCC: 5 | RNVC: 2

5 Aug 2013

5340-37-521-9302
Bumper

375219302
KDS 2350-4003: RNCC: 2 | RNVC: 1
61514025: RNCC: 3 | RNVC: 2
61514025: RNCC: 5 | RNVC: 2

26 Sep 2011

5340-37-504-3793
Mounting Plate

375043793
50089727: RNCC: 5 | RNVC: 9

14 Sep 1996

5340-37-518-2843
Clamp

375182843
530.011.008.700: RNCC: 5 | RNVC: 2

24 Jul 2009

5340-37-524-8176
Mounting Bracket

375248176
61528831: RNCC: 3 | RNVC: 2

5 Nov 2012

5340-37-523-9353
Access Cover

375239353
60821352: RNCC: 3 | RNVC: 2
60821352: RNCC: 5 | RNVC: 2

2 Aug 2012

5340-37-523-9016
Cushioning Pad

375239016
61527140-1: RNCC: 3 | RNVC: 2

30 Jul 2012

5340-37-524-8676
Bow Handle

375248676
A-1221-3: RNCC: 3 | RNVC: 2

19 Nov 2012

5340-37-510-0144
Angle Bracket

375100144
82911410: RNCC: 3 | RNVC: 2
82911410-01: RNCC: 5 | RNVC: 2

22 Aug 2003

5340-37-520-0848
Mounting Bracket

375200848
KDS 1510-4002: RNCC: 2 | RNVC: 1
85B0735-007: RNCC: 3 | RNVC: 2
85B0735-007: RNCC: 5 | RNVC: 2

30 Sep 2010

5340-37-515-3098
Upper Guide

375153098
50133471: RNCC: 3 | RNVC: 2
50133471: RNCC: 5 | RNVC: 2

30 May 2008

5340-37-508-5355
Extension Drawer Slide

375085355
Q65034520: RNCC: 3 | RNVC: 2

31 Jan 2002

5340-37-524-1015
Angle Bracket

375241015
A60076980: RNCC: 3 | RNVC: 2
A60076980: RNCC: 5 | RNVC: 2

10 Aug 2012

5340-37-519-5895
Threaded Rod End

375195895
A20008903: RNCC: 3 | RNVC: 2
A20008903: RNCC: 5 | RNVC: 2

10 Jun 2010

5340-37-516-8822
Mounting Bracket

375168822
80095723: RNCC: 3 | RNVC: 2
80095723: RNCC: 5 | RNVC: 2

26 Mar 2009

5340-37-525-7974
Access Cover

375257974
95014314: RNCC: 3 | RNVC: 2
95014314: RNCC: 5 | RNVC: 2

17 Mar 2013

5340-37-524-4074
Mounting Bracket

375244074
61527198: RNCC: 3 | RNVC: 2
61527198: RNCC: 5 | RNVC: 2

5 Sep 2012

5340-37-514-5275
Mounting Bracket

375145275
50138811: RNCC: 3 | RNVC: 2
50138811: RNCC: 5 | RNVC: 2

14 Dec 2007

5340-37-512-9950
Upper Housing

375129950
Q25021916: RNCC: 3 | RNVC: 2
Q25021916: RNCC: 5 | RNVC: 2

12 Apr 2006

5340-37-520-6603
Mounting Bracket

375206603
KDS 1005-1389: RNCC: 2 | RNVC: 1
Q55606711: RNCC: 3 | RNVC: 2
Q55606711: RNCC: 5 | RNVC: 2

17 Jan 2011

5340-37-521-9777
Angle Bracket

375219777
KDS 2350-4003: RNCC: 2 | RNVC: 1
61502646: RNCC: 3 | RNVC: 2
61502646: RNCC: 5 | RNVC: 2

21 Oct 2011

5340-37-526-1243
Block Clamp

375261243
91027433: RNCC: 3 | RNVC: 2
91027433: RNCC: 5 | RNVC: 2

29 May 2013

5340-37-524-4013
Mounting Plate

375244013
KDS584530111: RNCC: 2 | RNVC: 1
A50038898-01: RNCC: 3 | RNVC: 2
A50038898-01: RNCC: 5 | RNVC: 2
A50038898: RNCC: D | RNVC: 9

4 Sep 2012

5340-37-525-0407
Mounting Bracket

375250407
Q25022665-1: RNCC: 3 | RNVC: 2
Q25022665-1: RNCC: 5 | RNVC: 2
Q25022665: RNCC: D | RNVC: 9

14 Dec 2012

5340-37-518-7953
Mounting Plate

375187953
60816235: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60816235: RNCC: 5 | RNVC: 2

3 Nov 2009

5340-37-518-0230
Mounting Bracket

375180230
WF331309-01: RNCC: 3 | RNVC: 2

6 Jul 2009

5340-37-518-4969
Mounting Bracket

375184969
60671534: RNCC: 3 | RNVC: 2
60671534-2: RNCC: 3 | RNVC: 2
60671534-2: RNCC: 5 | RNVC: 2

7 Aug 2009

5340-37-511-8969
Angle Bracket

375118969
85Y9133-041: RNCC: 3 | RNVC: 2
85Y9133-041: RNCC: 5 | RNVC: 2

28 Apr 2005

5340-37-521-0479
Lock-Release Lever

375210479
A81016102-01: RNCC: 3 | RNVC: 2
A81016102-01: RNCC: 5 | RNVC: 2
A81016102: RNCC: D | RNVC: 9

30 Mar 2011

5340-37-508-2611
Angle Bracket

375082611
95007958: RNCC: 3 | RNVC: 2

20 Nov 2001

5340-37-522-8938
Mounting Bracket

375228938
KDS 5895-4032: RNCC: 2 | RNVC: 1
50141118: RNCC: 3 | RNVC: 2
50141118: RNCC: 5 | RNVC: 2

29 Mar 2012

5340-37-505-8264
Catch Strike

375058264
KDS 6230-3001: RNCC: 2 | RNVC: 1
F50001535: RNCC: 3 | RNVC: 2
PB100117: RNCC: 3 | RNVC: 2

15 Jun 1999

5340-37-522-6219
Mounting Bracket

375226219
A60071896: RNCC: 3 | RNVC: 2
A60071896: RNCC: 5 | RNVC: 2

9 Feb 2012

5340-37-525-4847
Mounting Bracket

375254847
91044955: RNCC: 3 | RNVC: 2
91044955: RNCC: 5 | RNVC: 2

31 Jan 2013

5340-37-503-0175
Butt Hinge Leaf

375030175
KDS 1290-1082: RNCC: 2 | RNVC: 1
40007042: RNCC: 5 | RNVC: 9

7 Nov 1994

5340-37-526-5671
Mounting Bracket

375265671
A60060902: RNCC: 3 | RNVC: 2
A60060902: RNCC: 5 | RNVC: 2

2 Aug 2013

5340-37-508-8958
Head Mount Assembly

375088958
Q65013500: RNCC: 3 | RNVC: 2
Q65013500-2: RNCC: 3 | RNVC: 2

7 May 2002

5340-37-114-1279

5340-37-503-8582

5340-37-502-1470
Access Cover

375021470
60642282: RNCC: 5 | RNVC: 9

14 Feb 1992

5340-37-512-9260
Support

375129260
Q25027577: RNCC: 3 | RNVC: 2
Q25027577: RNCC: 5 | RNVC: 2

16 Mar 2006

5340-37-512-7023
Webbing Strap

375127023
60126903: RNCC: 3 | RNVC: 2
60126903: RNCC: 3 | RNVC: 2

28 Oct 2005

5340-37-507-1028
Mounting Plate

375071028
Q55019173: RNCC: 3 | RNVC: 9

17 May 2000

5340-37-512-8825
Mounting Bracket

375128825
Q25022394: RNCC: 3 | RNVC: 2
Q25022394: RNCC: 5 | RNVC: 2

2 Mar 2006

5340-37-512-8953
Batte Door Assembly

375128953
Q25023960: RNCC: 3 | RNVC: 2
Q25023960: RNCC: 5 | RNVC: 2

7 Mar 2006

5340-37-512-4874
Flange Assembl Body

375124874
60097528: RNCC: 3 | RNVC: 2
60097528: RNCC: 5 | RNVC: 2

30 Aug 2005

5340-37-518-7576
Mounting Bracket

375187576
60815475: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60815475: RNCC: 5 | RNVC: 2

23 Oct 2009

5340-37-524-3075
Mounting Bracket

375243075
D60839382: RNCC: 3 | RNVC: 2

28 Aug 2012

5340-37-526-6883
Mounting Plate

375266883
61528957: RNCC: 3 | RNVC: 2
61528957: RNCC: 5 | RNVC: 2

21 Aug 2013

5340-37-504-3878
Mounting Bracket

375043878
50089069: RNCC: 5 | RNVC: 9

21 Sep 1996

5340-37-502-5764
Angle Bracket

375025764
60082022: RNCC: 3 | RNVC: 2

27 Dec 1993

5340-37-504-3015
Cap

375043015
60474713: RNCC: 5 | RNVC: 9
60474713: RNCC: 5 | RNVC: 9

23 Aug 1996

5340-37-526-1156
Block Clamp

375261156
91026564: RNCC: 3 | RNVC: 2
91026564: RNCC: 5 | RNVC: 2

22 May 2013

5340-37-513-8221
Retaining Band

375138221
521 16 04: RNCC: 3 | RNVC: 2

4 Jul 2007

5340-37-511-2884
Multiple Angle Bracket

375112884
80075725: RNCC: 3 | RNVC: 2
80075725: RNCC: 5 | RNVC: 2

20 Oct 2004

5340-37-521-8391
Mounting Bracket

375218391
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81061430: RNCC: 3 | RNVC: 2
A81061430-01: RNCC: 5 | RNVC: 2

15 Sep 2011

5340-37-522-5588
Mounting Bracket

375225588
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85F8151-639: RNCC: 3 | RNVC: 2
85F8151-639: RNCC: 5 | RNVC: 2

1 Feb 2012

5340-37-501-4014
Dust And Moisture Seal Protective Plug

375014014
KDS 2350-1010: RNCC: 2 | RNVC: 1
60746477: RNCC: 3 | RNVC: 2
60746477: RNCC: 5 | RNVC: 2
60746477: RNCC: 5 | RNVC: 2
60746477: RNCC: 5 | RNVC: 2

5 Sep 1989

5340-37-505-4905
Mounting Plate

375054905
KDS 1356-1005: RNCC: 2 | RNVC: 1
93008057: RNCC: 5 | RNVC: 9
93008057: RNCC: 5 | RNVC: 9

30 Jan 1999

5340-37-514-0658
Strap Fastener Loop

375140658
KDS 2320-4006: RNCC: 2 | RNVC: 1
A60017402: RNCC: 3 | RNVC: 2
A60017402: RNCC: 5 | RNVC: 2

17 Sep 2007

5340-37-503-0184
Angle Bracket

375030184
KDS 1290-1082: RNCC: 2 | RNVC: 1
40007052: RNCC: 5 | RNVC: 9

7 Nov 1994

5340-37-160-7330
Ring

371607330
5340-97-160-7330: RNCC: 2 | RNVC: 2
07000-05150: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-524-4770
Mounting Plate

375244770
NFAA-992450: RNCC: 3 | RNVC: 2

21 Sep 2012

5340-37-511-0822
Mounting Bracket

375110822
70019224: RNCC: 3 | RNVC: 2
70019224: RNCC: 5 | RNVC: 2

17 Aug 2004

5340-37-526-8848
Cushioning Pad

375268848
A60023560: RNCC: 3 | RNVC: 2
A60023560: RNCC: 5 | RNVC: 2

10 Sep 2013

5340-37-512-9233
Guide

375129233
Q25027533: RNCC: 3 | RNVC: 2
Q25027533: RNCC: 5 | RNVC: 2

15 Mar 2006

5340-37-515-9392
Padlock Set

375159392
60755210-1: RNCC: 3 | RNVC: 2
60755210-1: RNCC: 5 | RNVC: 2

17 Oct 2008

5340-37-513-4823
Multiple Angle Bracket

375134823
85H5831-083: RNCC: 3 | RNVC: 2
85H5831-083: RNCC: 5 | RNVC: 2

5 Feb 2007

5340-37-506-0177
Mounting Bracket

375060177
KDS 2350-1024: RNCC: 2 | RNVC: 1
60344610: RNCC: 3 | RNVC: 2

26 Jul 1999

5340-37-519-2996
Spacing Threaded Standoff

375192996
81363363: RNCC: 3 | RNVC: 2
81363363: RNCC: 5 | RNVC: 2

8 Mar 2010

5340-37-508-0298
Block Clamp

375080298
80267304: RNCC: 5 | RNVC: 2

7 Sep 2001

5340-37-518-8872
Mounting Plate

375188872
93015457: RNCC: 3 | RNVC: 2
93015457: RNCC: 5 | RNVC: 2

23 Nov 2009

5340-37-514-3910
Guide Ailerons Inst

375143910
10301.5315.000: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-37-518-4651
Mounting Plate

375184651
A20013560: RNCC: 3 | RNVC: 2
A20013560: RNCC: 5 | RNVC: 2

4 Aug 2009

5340-37-520-7718
Angle Bracket

375207718
A81140350: RNCC: 3 | RNVC: 2
A8114035001: RNCC: 3 | RNVC: 2
A8114035001: RNCC: 5 | RNVC: 2

9 Feb 2011

5340-37-525-7701
Mounting Bracket

375257701
N51006913: RNCC: 3 | RNVC: 2
N51006913: RNCC: 5 | RNVC: 2

14 Mar 2013

5340-37-505-8307
Angle Bracket

375058307
KDS 1510-4001: RNCC: 2 | RNVC: 1
81324371: RNCC: 3 | RNVC: 2
81324371-01: RNCC: 5 | RNVC: 2

16 Jun 1999

5340-37-522-3863
Mounting Plate

375223863
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85D7150-612: RNCC: 3 | RNVC: 2
85D7150-612: RNCC: 5 | RNVC: 2

23 Dec 2011

5340-37-512-3435
Block Clamp

375123435
85B5862-015: RNCC: 3 | RNVC: 2
85B5862-015: RNCC: 5 | RNVC: 2

28 Jul 2005

5340-37-521-7605
Mounting Bracket

375217605
KDS 1285-1010: RNCC: 2 | RNVC: 1
Q55607560: RNCC: 3 | RNVC: 2
Q55607560: RNCC: 5 | RNVC: 2

30 Aug 2011

5340-37-507-3204
Mounting Plate

375073204
KDS 1080-3002: RNCC: 2 | RNVC: 1
95007061: RNCC: 5 | RNVC: 9

30 Aug 2000

5340-37-512-1498
Mounting Plate

375121498
85F7353-013: RNCC: 3 | RNVC: 2
85F7353-013: RNCC: 5 | RNVC: 2

23 Jun 2005

5340-37-523-4462
Access Cover

375234462
A60079424: RNCC: 3 | RNVC: 2
A60079424: RNCC: 5 | RNVC: 2

13 Jun 2012

5340-37-510-2727
Rotary Table

375102727
Q55016758: RNCC: 3 | RNVC: 2
Q55016758: RNCC: 5 | RNVC: 2

15 Dec 2003

5340-37-502-8201
Mounting Bracket

375028201
60088410: RNCC: 3 | RNVC: 2

13 Aug 1994

5340-37-504-3851
Mounting Plate

375043851
50097102: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-37-516-6560
Filler Opening Cap

375166560
61500481: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61500481: RNCC: 5 | RNVC: 2

6 Feb 2009

5340-37-502-8697
Cover Assembly

375028697
KDS 2350-1024: RNCC: 2 | RNVC: 1
60308175: RNCC: 3 | RNVC: 2

28 Sep 1994

5340-37-507-6315
Left Stiffener

375076315
KDS 1005-3001: RNCC: 2 | RNVC: 1
Q25018676: RNCC: 5 | RNVC: 9
Q25018676: RNCC: 5 | RNVC: 9

30 Jan 2001

5340-37-521-9706
Retaining Strap

375219706
KDS 2350-4003: RNCC: 2 | RNVC: 1
61532620: RNCC: 3 | RNVC: 2
61532620: RNCC: 5 | RNVC: 2

18 Oct 2011

5340-37-518-7580
Rod End Connector

375187580
60815611: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60815611: RNCC: 5 | RNVC: 2

23 Oct 2009

5340-37-512-5260
Bracket Assembly

375125260
Q65084204: RNCC: 3 | RNVC: 2
Q65084204: RNCC: 3 | RNVC: 2

2 Sep 2005

5340-37-501-2123
Special Hinge

375012123
KDC2350-P0003-6: RNCC: 2 | RNVC: 1
60704257: RNCC: 3 | RNVC: 2
60704257: RNCC: 5 | RNVC: 2

11 Jan 1989

5340-37-513-1019
Spacer Collar

375131019
80017457: RNCC: 3 | RNVC: 2
80017457: RNCC: 5 | RNVC: 2

11 Jul 2006

5340-37-512-9017
Angle Bracket

375129017
Q25025615: RNCC: 3 | RNVC: 2
Q25025615: RNCC: 5 | RNVC: 2

9 Mar 2006

5340-37-501-1832
Mounting Block

375011832
KDC2350-P0003-6: RNCC: 2 | RNVC: 1
60702845: RNCC: 3 | RNVC: 2
60702845: RNCC: 5 | RNVC: 2

7 Dec 1988

5340-37-524-3401
Mounting Bracket

375243401
KDS 58804001: RNCC: 2 | RNVC: 1
A40001447: RNCC: 3 | RNVC: 2
A40001447: RNCC: 5 | RNVC: 2

29 Aug 2012

5340-37-525-2552
Mounting Plate

375252552
91045292: RNCC: 3 | RNVC: 2
91045292: RNCC: 5 | RNVC: 2

14 Jan 2013

5340-37-520-5321
Access Cover

375205321
A20015619: RNCC: 3 | RNVC: 2
A20015619: RNCC: 5 | RNVC: 2

13 Dec 2010

5340-37-515-2888
Mounting Plate

375152888
50146958: RNCC: 3 | RNVC: 2
50146958: RNCC: 5 | RNVC: 2

23 May 2008

5340-37-524-2637
Mounting Bracket

375242637
KDS584530111: RNCC: 2 | RNVC: 1
A50038869-01: RNCC: 3 | RNVC: 2
A50038869-01: RNCC: 5 | RNVC: 2
A50038869: RNCC: D | RNVC: 9

24 Aug 2012

5340-37-513-2917
Angle Bracket

375132917
688-62-SB306: RNCC: 3 | RNVC: 2

22 Nov 2006

5340-37-506-2585
Cushioning Pad

375062585
KDS 1230-1014: RNCC: 2 | RNVC: 1
60375913: RNCC: 3 | RNVC: 2

17 Aug 1999

5340-37-524-2077
Shelf Bracket

375242077
KDS 5855-4012: RNCC: 2 | RNVC: 1
A40008693: RNCC: 3 | RNVC: 2
A40008693: RNCC: 5 | RNVC: 2

20 Aug 2012

5340-37-522-8928
Mounting Bracket

375228928
KDS 5895-4032: RNCC: 2 | RNVC: 1
50141112: RNCC: 3 | RNVC: 2
50141112: RNCC: 5 | RNVC: 2

29 Mar 2012

5340-37-509-2941
Mounting Bracket

375092941
KDS 2350-1024: RNCC: 2 | RNVC: 1
60347170: RNCC: 3 | RNVC: 2
60347170: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-37-519-0839
Mounting Plate

375190839
61525126: RNCC: 3 | RNVC: 2
KDS 2350-4003: RNCC: 4 | RNVC: 1
61525126: RNCC: 5 | RNVC: 2

22 Dec 2009

5340-37-519-1800
Slotted Nut Locking Device

375191800
81362078: RNCC: 3 | RNVC: 2
81362078: RNCC: 5 | RNVC: 2

22 Jan 2010

5340-37-510-3121
Dust And Moisture Seal Protective Plug

375103121
81045824: RNCC: 5 | RNVC: 9

26 Dec 2003

5340-37-527-2499
Angle Bracket

375272499
A50044666: RNCC: 3 | RNVC: 2
A50044666: RNCC: 5 | RNVC: 2

22 Oct 2013

5340-37-520-4410
Access Cover

375204410
A40005246: RNCC: 3 | RNVC: 2
A40005246: RNCC: 5 | RNVC: 2

7 Dec 2010

5340-37-524-2534
Butt Hinge

375242534
60313094: RNCC: 3 | RNVC: 2
60313094: RNCC: 5 | RNVC: 2

23 Aug 2012

5340-37-507-7458
Mounting Bracket

375077458
Q45016845: RNCC: 3 | RNVC: 2

21 Mar 2001

5340-37-507-4090
Plate Retainer

375074090
60334207: RNCC: 3 | RNVC: 2
60334207: RNCC: 5 | RNVC: 2

29 Sep 2000

5340-37-512-8921
Rod End Clevis

375128921
Q25025461: RNCC: 3 | RNVC: 2
Q25025461: RNCC: 5 | RNVC: 2

3 Mar 2006

5340-37-502-5998
Section Block Clamp

375025998
60060188: RNCC: 3 | RNVC: 2

28 Feb 1994

5340-37-507-2260
Mounting Bracket

375072260
20111096: RNCC: 5 | RNVC: 9

3 Aug 2000

5340-37-512-9694
Angle Bracket Set

375129694
Q25027977: RNCC: 3 | RNVC: 2
Q25027977: RNCC: 5 | RNVC: 2

31 Mar 2006

5340-37-516-5579
Detent Plunger

375165579
20030229: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030229: RNCC: 5 | RNVC: 2

24 Dec 2008

5340-37-517-4916
Safety Plate

375174916
6580450-000-00: RNCC: 5 | RNVC: 2

11 Jun 2009

5340-37-518-2968
Angle Control Band

375182968
688-53-SB304-01: RNCC: 5 | RNVC: 2

27 Jul 2009

5340-37-505-9546
Mounting Plate

375059546
KDS 2350-1024: RNCC: 2 | RNVC: 1
60339545: RNCC: 3 | RNVC: 2

16 Jul 1999

5340-37-522-4784
Retaining Clip

375224784
KDC 1510-T4002: RNCC: 2 | RNVC: 1
85F7721-613: RNCC: 5 | RNVC: 2
85F7721-613: RNCC: D | RNVC: 9

12 Jan 2012

5340-37-522-4150
Angle Bracket

375224150
KDC 1680-T4005: RNCC: 2 | RNVC: 1
A81025556: RNCC: 3 | RNVC: 2
A81025556-01: RNCC: 3 | RNVC: 2
A81025556-01: RNCC: 5 | RNVC: 2
A81025556-01: RNCC: 5 | RNVC: 2

28 Dec 2011

5340-37-521-9873
Latch Bar

375219873
KDS 2350-4003: RNCC: 2 | RNVC: 1
61502709: RNCC: 3 | RNVC: 2
61502709: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-37-512-8057
Wormwheel Support

375128057
Q25024802: RNCC: 3 | RNVC: 2
Q25024802: RNCC: 5 | RNVC: 2

3 Feb 2006

5340-37-504-9463
Mounting Plate

375049463
60080818: RNCC: 3 | RNVC: 2
60080818: RNCC: 5 | RNVC: 2

8 Dec 1997

5340-37-519-3958
Helical Compression Spring Seat

375193958
A20007253: RNCC: 3 | RNVC: 2
A20007253: RNCC: 5 | RNVC: 2

25 Mar 2010

5340-37-521-0648
Access Cover

375210648
50136843: RNCC: 3 | RNVC: 2
50136843: RNCC: 5 | RNVC: 2

31 Mar 2011

5340-37-512-9728
Angle Bracket

375129728
Q25025584: RNCC: 3 | RNVC: 2
Q25025584: RNCC: 5 | RNVC: 2

31 Mar 2006

5340-37-512-9632
Dust And Moisture Seal Protective Cover

375129632
Q25025235: RNCC: 3 | RNVC: 2
Q25025235: RNCC: 5 | RNVC: 2

29 Mar 2006

5340-37-512-7904
Retaining Strap

375127904
Q25028523: RNCC: 3 | RNVC: 2
Q25028523: RNCC: 5 | RNVC: 2

12 Dec 2005

5340-37-508-3609
Clip

375083609
95007746: RNCC: 3 | RNVC: 2
95007746: RNCC: 3 | RNVC: 2

8 Dec 2001

5340-37-525-1328
Access Cover

375251328
A40003476: RNCC: 3 | RNVC: 2
A40003476: RNCC: 5 | RNVC: 2

7 Jan 2013

5340-37-520-7705
Mounting Bracket

375207705
A81140302: RNCC: 3 | RNVC: 2
A8114030201: RNCC: 3 | RNVC: 2
A8114030201: RNCC: 5 | RNVC: 2

9 Feb 2011

5340-37-523-7089
Mounting Plate

375237089
60818032: RNCC: 3 | RNVC: 2
60818032: RNCC: 5 | RNVC: 2

13 Jul 2012

5340-37-510-6306
Dust And Moisture Seal Protective Cap

375106306
60574509: RNCC: 3 | RNVC: 2
60574509: RNCC: 3 | RNVC: 2

17 Apr 2004

5340-37-507-3780
Spall Wall Assembly

375073780
60324612: RNCC: 3 | RNVC: 2
60324612: RNCC: 5 | RNVC: 2

21 Sep 2000

5340-37-501-5583
Double Angle Bracket

375015583
60737853: RNCC: 3 | RNVC: 2
60737853: RNCC: 5 | RNVC: 2

2 Apr 1990

5340-37-510-1314
Mounting Bracket

375101314
81043861: RNCC: 5 | RNVC: 9
81043861: RNCC: 5 | RNVC: 9

2 Oct 2003

5340-37-518-5623
Mounting Bracket

375185623
A20010872: RNCC: 3 | RNVC: 2
A20010872: RNCC: 5 | RNVC: 2

18 Aug 2009

5340-37-511-9326
Mechanical Stop

375119326
85K7231-003: RNCC: 3 | RNVC: 2
85K7231-003: RNCC: 5 | RNVC: 2

9 May 2005

5340-37-507-3369
Slipling Cover

375073369
KDS 3950-3002: RNCC: 2 | RNVC: 1
95005838: RNCC: 3 | RNVC: 2
95005838: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-37-516-5619
Fast Feeder

375165619
20030345: RNCC: 3 | RNVC: 2
KDS 1010-4001: RNCC: 4 | RNVC: 1
20030345: RNCC: 5 | RNVC: 2

26 Dec 2008

5340-37-511-8145
Moun Plate Assembly

375118145
Q55111687: RNCC: 3 | RNVC: 2
Q55111687: RNCC: 5 | RNVC: 2

8 Apr 2005

5340-37-517-8207
Turnbuckle

375178207
20025634: RNCC: 3 | RNVC: 2
20025634: RNCC: 5 | RNVC: 2
2997T67: RNCC: 5 | RNVC: 2

30 Jun 2009

5340-37-515-5839
Percussion Cap

375155839
KR45.013: RNCC: 3 | RNVC: 2
KR45.013: RNCC: 5 | RNVC: 2

28 Jul 2008

5340-37-507-7022
Double Angle Bracket

375077022
60325306: RNCC: 3 | RNVC: 2
60325306: RNCC: 5 | RNVC: 2

26 Feb 2001

5340-37-511-5768
Rear Cover

375115768
95011037: RNCC: 3 | RNVC: 2
95011037: RNCC: 5 | RNVC: 9

17 Feb 2005

5340-37-517-5770
Cushioning Pad

375175770
60324943: RNCC: 3 | RNVC: 2
60324943: RNCC: 5 | RNVC: 2

18 Jun 2009

5340-37-511-5412
Mounting Plate

375115412
95009904: RNCC: 3 | RNVC: 2
95009904: RNCC: 5 | RNVC: 2

31 Jan 2005

5340-37-502-3699
Detent Plunger

375023699
60744322: RNCC: 3 | RNVC: 2
60744322: RNCC: 5 | RNVC: 2

11 Mar 1993

5340-37-525-7643
Mounting Plate

375257643
N51004794: RNCC: 3 | RNVC: 2
N51004794: RNCC: 5 | RNVC: 2

14 Mar 2013

5340-37-502-0423
Bracket Assembly

375020423
60715186: RNCC: 3 | RNVC: 2
60715186: RNCC: 5 | RNVC: 2

21 Oct 1991

5340-37-516-5176
Sliding Block

375165176
SC 30UU: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-37-517-3716
Dust And Moisture Seal Boot

375173716
60743299: RNCC: 3 | RNVC: 2

4 Jun 2009

5340-37-522-0506
Mounting Bracket

375220506
KDS 2350-4003: RNCC: 2 | RNVC: 1
61507050: RNCC: 3 | RNVC: 2
61507050: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-37-522-4147
Mounting Bracket

375224147
KDC 1680-T4005: RNCC: 2 | RNVC: 1
A81025553-01: RNCC: 3 | RNVC: 2
A81025553: RNCC: 3 | RNVC: 2
A81025553-01: RNCC: 5 | RNVC: 2
A81025553-01: RNCC: 5 | RNVC: 2

28 Dec 2011

5340-37-114-1598
Brake Shoe Spring

371141598
KDC 2510-P0001: RNCC: 2 | RNVC: 1
5340-97-114-1598: RNCC: 2 | RNVC: 2
072744662: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-521-9204
Mounting Plate

375219204
KDS 2350-4003: RNCC: 2 | RNVC: 1
61526359: RNCC: 3 | RNVC: 2
61526359: RNCC: 5 | RNVC: 2

23 Sep 2011

5340-37-521-1179
Mounting Bracket

375211179
VS5CK-001: RNCC: 3 | RNVC: 2

15 Apr 2011

5340-37-521-8390
Mounting Bracket

375218390
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81061429: RNCC: 3 | RNVC: 2
A81061429-01: RNCC: 5 | RNVC: 2

15 Sep 2011

5340-37-517-9858
Retaining Strap

375179858
60826083: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826083: RNCC: 5 | RNVC: 2

2 Jul 2009

5340-37-150-0039
Ecoentric Ring

371500039
KDC 1240-P0002: RNCC: 2 | RNVC: 1
5340-97-150-0039: RNCC: 2 | RNVC: 2
1240-K11-0903: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-006-6008
Rubber Ring

370066008
5340-97-006-6008: RNCC: 2 | RNVC: 2
1322997000: RNCC: 3 | RNVC: 2

23 Nov 1987

5340-37-504-3836
Angle Bracket

375043836
50096168: RNCC: 5 | RNVC: 9

17 Sep 1996

5340-37-067-0374

5340-37-521-9436
Mounting Bracket

375219436
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81506410-01: RNCC: 3 | RNVC: 2
A81506410-01: RNCC: 5 | RNVC: 2
A81506410: RNCC: D | RNVC: 9

30 Sep 2011

5340-37-521-4187
Access Cover

375214187
A81001327-01: RNCC: 2 | RNVC: 1
A81001327: RNCC: 3 | RNVC: 2
A81001327-01: RNCC: 5 | RNVC: 2

14 Jun 2011

5340-37-526-5093
Mortise Latch Set

375265093
S-5100: RNCC: 3 | RNVC: 2

25 Jul 2013

5340-37-114-2706
Upper Hose Clamp

371142706
5340-97-114-2706: RNCC: 2 | RNVC: 2
992825800: RNCC: 3 | RNVC: 2
KDS 2320-1005: RNCC: 4 | RNVC: 1

23 Nov 1987

5340-37-519-1205
Mounting Bracket

375191205
81025502-10: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-527-1547
Mounting Plate

375271547
A50058860: RNCC: 3 | RNVC: 2
A50058860: RNCC: 5 | RNVC: 2

15 Oct 2013

5340-37-508-9828
Synchro Clamp

375089828
KDS5895-1036-3: RNCC: 2 | RNVC: 1
Q55106102: RNCC: 3 | RNVC: 2
Q55106102: RNCC: 5 | RNVC: 2

11 Jun 2002

5340-37-520-8470
Dust And Moisture Seal Protective Cap-Plug

375208470
KDS 1230-4003: RNCC: 2 | RNVC: 1
60828660: RNCC: 3 | RNVC: 2
SJD38999/52W11N: RNCC: 3 | RNVC: 2
60828601: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-37-521-8311
Mounting Bracket

375218311
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81035125: RNCC: 3 | RNVC: 2
A81035125-01: RNCC: 5 | RNVC: 2

15 Sep 2011

5340-37-521-5903
Angle Bracket

375215903
KDS 1510-4002: RNCC: 2 | RNVC: 1
85S2115-019: RNCC: 3 | RNVC: 2
85S2115-019: RNCC: 5 | RNVC: 2

15 Jul 2011

5340-37-114-4259
Cup

371144259
KDC 2510-P0007: RNCC: 2 | RNVC: 1
5340-97-114-4259: RNCC: 2 | RNVC: 2
992761608: RNCC: 3 | RNVC: 2
KDS 2320-1005: RNCC: 4 | RNVC: 1

23 Nov 1987

5340-37-511-5914
Angle Bracket

375115914
85PF9150-211: RNCC: 3 | RNVC: 2
85PF9150-211: RNCC: 5 | RNVC: 2

21 Feb 2005

5340-37-508-5068
Mounting Bracket

375085068
Q65026269: RNCC: 3 | RNVC: 2

25 Jan 2002

5340-37-508-4968
Vent Plug

375084968
Q65026258: RNCC: 3 | RNVC: 2

23 Jan 2002

5340-37-504-0362
Sending Unit Ass'y

375040362
243200881: RNCC: 3 | RNVC: 2

18 Apr 1996

5340-37-521-8289
Mounting Bracket

375218289
A60067322: RNCC: 3 | RNVC: 2
A60067322: RNCC: 5 | RNVC: 2

13 Sep 2011

5340-37-521-9782
Rod End Connector

375219782
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81252105: RNCC: 3 | RNVC: 2
A81252105-01: RNCC: 3 | RNVC: 2
A81252105-01: RNCC: 5 | RNVC: 2

21 Oct 2011

5340-37-521-9939
Mounting Bracket

375219939
KDC 1520-T4001: RNCC: 2 | RNVC: 1
A81506114-02: RNCC: 3 | RNVC: 2
A81506114-02: RNCC: 5 | RNVC: 2
A81506114: RNCC: D | RNVC: 9

26 Oct 2011

5340-37-523-8216
Mounting Plate

375238216
1675152K8.1: RNCC: 3 | RNVC: 2

19 Jul 2012

5340-37-522-8793
Lock Bar

375228793
KDS 5895-4032: RNCC: 2 | RNVC: 1
50140942: RNCC: 3 | RNVC: 2
50140942: RNCC: 5 | RNVC: 2

23 Mar 2012

5340-37-505-8884
Mounting Bracket

375058884
81392376: RNCC: 3 | RNVC: 2
81392376-01: RNCC: 5 | RNVC: 2

6 Jul 1999

5340-37-516-8245
Mounting Bracket

375168245
60825707: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60825707: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-37-005-1607

5340-37-516-0155
Mounting Plate

375160155
83030750: RNCC: 3 | RNVC: 2
83030750: RNCC: 5 | RNVC: 2
83030750: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-515-2387
Mounting Bracket

375152387
50144892: RNCC: 3 | RNVC: 2
50144892: RNCC: 5 | RNVC: 2

15 May 2008

5340-37-525-7550
Mounting Bracket

375257550
N51005224: RNCC: 3 | RNVC: 2
N51005224: RNCC: 5 | RNVC: 2

13 Mar 2013

5340-37-524-3527
Retaining Clip

375243527
D60839386: RNCC: 5 | RNVC: 2

31 Aug 2012

5340-37-512-4992
Angle Bracket

375124992
Q65060225: RNCC: 3 | RNVC: 2
Q65060225: RNCC: 3 | RNVC: 2

1 Sep 2005

5340-37-512-8274
Mounting Plate

375128274
Q25023033: RNCC: 3 | RNVC: 2
Q25023033: RNCC: 5 | RNVC: 2

14 Feb 2006

5340-37-523-1357
Bumper

375231357
A20018749: RNCC: 3 | RNVC: 2
A20018749: RNCC: 5 | RNVC: 2

7 May 2012

5340-37-523-6364
Mounting Bracket

375236364
A81026311-01: RNCC: 3 | RNVC: 2
A81026311-01: RNCC: 5 | RNVC: 2
A81026311: RNCC: D | RNVC: 9

9 Jul 2012

5340-37-504-0581
Spacer

375040581
23A-22-11590: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-37-519-1269
Retaining Strap

375191269
81553346-01: RNCC: 3 | RNVC: 2

15 Jan 2010

5340-37-513-2840
Rod

375132840
219-21-201: RNCC: 3 | RNVC: 2

20 Nov 2006

5340-37-505-1369
Access Cover

375051369
KDS5805-1074-3: RNCC: 2 | RNVC: 1
50105970: RNCC: 3 | RNVC: 2

8 May 1998

5340-37-518-0501
Mounting Plate

375180501
60826131: RNCC: 3 | RNVC: 2
KDS 2350-4002: RNCC: 4 | RNVC: 1
60826131: RNCC: 5 | RNVC: 2

6 Jul 2009

5340-37-114-0973
Radiator Clamp

371140973
5340-97-114-0973: RNCC: 2 | RNVC: 2
992826300: RNCC: 3 | RNVC: 2
992826300: RNCC: 3 | RNVC: 2
KDS 2320-1006: RNCC: 4 | RNVC: 1
99282: RNCC: D | RNVC: 9

23 Nov 1987

5340-37-512-5542
Monitor Fix Bracket

375125542
20164071: RNCC: 3 | RNVC: 2
20164071: RNCC: 5 | RNVC: 2

8 Sep 2005

5340-37-502-5075
Angle Bracket

375025075
60083503: RNCC: 3 | RNVC: 2
60083503: RNCC: 3 | RNVC: 2

25 Oct 1993

5340-37-516-0862
Angle Bracket

375160862
91029354: RNCC: 3 | RNVC: 2
91029354: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-37-526-4848
Angle Bracket

375264848
A81026325: RNCC: 3 | RNVC: 2
A81026325-01: RNCC: 5 | RNVC: 2

24 Jul 2013

5340-37-512-8547
Link

375128547
Q25022271: RNCC: 3 | RNVC: 2
Q25022271: RNCC: 5 | RNVC: 2

23 Feb 2006

5340-37-519-6929
Nut And Bolt Locking Plate

375196929
A20008483: RNCC: 3 | RNVC: 2
A20008483: RNCC: 5 | RNVC: 2

5 Jul 2010

5340-37-526-8595
Mounting Bracket

375268595
N40239001: RNCC: 3 | RNVC: 2

9 Sep 2013

5340-37-510-8109
Emi Filter Cover

375108109
Q55023475: RNCC: 3 | RNVC: 1
Q55023475: RNCC: 3 | RNVC: 2

26 Jun 2004

5340-37-524-0640
Top Pan Mount Panel

375240640
91039224: RNCC: 3 | RNVC: 2
91039224: RNCC: 5 | RNVC: 2

8 Aug 2012

5340-37-507-3732
Special Hinge

375073732
60324626: RNCC: 3 | RNVC: 2
60324626: RNCC: 5 | RNVC: 2

20 Sep 2000

5340-37-516-3823
Retaining Band

375163823
T10 1252 O: RNCC: 3 | RNVC: 2

17 Nov 2008

5340-37-523-6374
Angle Bracket

375236374
A81026317-01: RNCC: 3 | RNVC: 2
A81026317-01: RNCC: 5 | RNVC: 2
A81026317: RNCC: D | RNVC: 9

9 Jul 2012

Load More Results