What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 9 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 9 of 72

5340-15-187-8201
Mounting Bracket

151878201
018.066.00.37: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.37: RNCC: 5 | RNVC: 2
018.066.00.37: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-119-1796
Mounting Bracket

151191796
75214478: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-063-2519
Butt Hinge Leaf

150632519
A1-23287-751: RNCC: 3 | RNVC: 2
A1-23287-751: RNCC: 5 | RNVC: 9

28 Jan 1983

5340-15-040-2393
Angle Bracket

150402393
2-4752-101-24091-5: RNCC: 3 | RNVC: 2
2-4752-1-01-24091-5: RNCC: 5 | RNVC: 2

29 Sep 1975

5340-15-061-5243
Handle Grip

150615243
000200268400: RNCC: 5 | RNVC: 2
000200268400: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-001-7966
Mounting Bracket

150017966
5949784691: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-065-0910
Rod End Connector

150650910
1255-14-116: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-3520
Retaining Strap

151153520
538-16-1160: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-207-4126
Loop Clamp

152074126
260-16-30-1: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-163-4587
Mounting Bracket

151634587
17H-329A01000-013-204: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-152-0216
Retaining Strap

151520216
0-173222: RNCC: 3 | RNVC: 2
00173222: RNCC: 3 | RNVC: 2
(241)A39630-173222: RNCC: 5 | RNVC: 2

2 Aug 2000

5340-15-007-6153
Clip Retainer Plate

150076153
P125393-002: RNCC: 3 | RNVC: 2

11 Feb 1980

5340-15-195-8581
Mounting Bracket

151958581
A9066950114: RNCC: 3 | RNVC: 2
(241)AJ611A9066950114: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-002-3109
Mounting Bracket

150023109
504376996: RNCC: 3 | RNVC: 2

6 Aug 2013

5340-15-117-6382
Support Hook

151176382
142502180: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-156-5154
Access Hole Frame

151565154
21200065: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-15-105-8918
Leather Strap

151058918
1358965: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-057-4395
Retaining Band

150574395
204-9000-10-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-006-9210
Rod End Clevis

150069210
NOR5-225-12-7: RNCC: 3 | RNVC: 2

30 May 1980

5340-15-193-7046
Access Cover

151937046
9903905157: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-195-4793
Expansion Shield

151954793
42728644: RNCC: 3 | RNVC: 2
(241)ACA6442728644: RNCC: 5 | RNVC: 2

29 Mar 2011

5340-15-109-0068
Butt Hinge Leaf

151090068
1395472: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-107-5132
Expansion Plug

151075132
7165202: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-148-6564
Angle Bracket

151486564
190525192: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-162-4248
Mounting Bracket

151624248
A151117-1: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-15-005-6052
Bow Handle

150056052
0P021: RNCC: 3 | RNVC: 2
OP 021: RNCC: 5 | RNVC: 2
OP 021: RNCC: 5 | RNVC: 2

21 Apr 1979

5340-15-142-7339
Mending Plate

151427339
1127-44-217: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-112-9581
Mending Plate

151129581
032127/1: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-178-3721
Access Cover

151783721
363232005: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-059-3574
Retaining Strap

150593574
1127-32-260: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-007-6269
Angle Bracket

150076269
P-135575-010: RNCC: 3 | RNVC: 2
P135575-010: RNCC: 5 | RNVC: 2

8 Mar 1980

5340-15-109-5970
Expansion Plug

151095970
10158250: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-089-0237
Angle Bracket

150890237
5069434: RNCC: 3 | RNVC: 2
5069434: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-063-5298
Retaining Band

150635298
17049: RNCC: 3 | RNVC: 2

10 May 1983

5340-15-139-4848
Angle Bracket

151394848
60115673: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-168-9213
Coat And Hat Hook

151689213
F71016411: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-106-9672
Angle Bracket

151069672
1350617: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-187-2183
Clamping Catch

151872183
174802106: RNCC: 3 | RNVC: 2
E2.04.00.30/6: RNCC: 3 | RNVC: 2
(241)A0199174802106: RNCC: 5 | RNVC: 2
E20400: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-163-3817
Bridge Clamp

151633817
9452416: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-207-0628
Pipe Hanger

152070628
SLENN47960: RNCC: 3 | RNVC: 2
(241)AB882SLENN47960: RNCC: 5 | RNVC: 2

29 Aug 2012

5340-15-109-0166
Loop Clamp

151090166
60103049: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-178-9162
Spring Holder

151789162
AG004MD053AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-193-7067
Bridge Clamp

151937067
8037605: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-119-0766
Loop Clamp

151190766
70927312: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-063-8151
Access Door Hinge

150638151
109-0503-17-5: RNCC: 3 | RNVC: 2

3 Sep 1983

5340-15-119-7147
Angle Bracket

151197147
60173300: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-199-6765
Protection Bellows

151996765
98479283: RNCC: 3 | RNVC: 2
(241)A424998479283: RNCC: 5 | RNVC: 2

17 May 2005

5340-15-052-0840
Angle Bracket

150520840
H1270-22: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-157-5448
Loop Clamp

151575448
8888-8: RNCC: 2 | RNVC: 3

19 Sep 2003

5340-15-113-1808
Loop Clamp

151131808
0-105021: RNCC: 3 | RNVC: 2
00105021: RNCC: 3 | RNVC: 2
(241)A39630-105021: RNCC: 5 | RNVC: 2
1PA39630-105021: RNCC: 5 | RNVC: 2

16 Dec 1990

5340-15-156-4064
Loop Clamp

151564064
142068204: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-163-3689
Loop Clamp

151633689
9299036: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-187-2051
Mounting Bracket

151872051
SC 100 677: RNCC: 3 | RNVC: 2
(241)A3980SC100677: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-200-4501
Mounting Bracket

152004501
920-7548/01: RNCC: 3 | RNVC: 2
(241)A4582920-7548/01: RNCC: 5 | RNVC: 2

23 Jan 2006

5340-15-156-1506
Mending Plate

151561506
991241062: RNCC: 3 | RNVC: 2
42536456: RNCC: 5 | RNVC: 2

6 Dec 2002

5340-15-178-6499
Mounting Plate

151786499
2231.069.0006: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-150-6595
Rod End Clevis

151506595
746100-01: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-153-0610
Angle Bracket

151530610
0-159703: RNCC: 3 | RNVC: 2
1PA39630-159703: RNCC: 5 | RNVC: 2

15 Nov 2000

5340-15-007-2358
Angle Bracket

150072358
P-120359-001: RNCC: 3 | RNVC: 2
P120359-001: RNCC: 5 | RNVC: 2

12 Mar 1980

5340-15-180-6991
Padlock

151806991
3802160: RNCC: 3 | RNVC: 2
(241)A39603802160: RNCC: 5 | RNVC: 2

4 Jul 2008

5340-15-007-4997
Mending Plate

150074997
1239-03-103: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-153-5879
Access Cover

151535879
142006101: RNCC: 3 | RNVC: 2

16 Feb 2001

5340-15-119-2410
Loop Clamp

151192410
205-7501-19-1: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-200-9143
Corner Brace

152009143
A6121-92197-8: RNCC: 3 | RNVC: 2
(241)A0126A6121-92197-8: RNCC: 5 | RNVC: 2

3 Apr 2006

5340-15-154-2117
Angle Bracket

151542117
0-169756: RNCC: 3 | RNVC: 2
1PA39630-169756: RNCC: 5 | RNVC: 2
(241)A39630-169756: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-151-7276
Loop Clamp

151517276
0-102124: RNCC: 3 | RNVC: 2
00102124: RNCC: 3 | RNVC: 2
1PA39630-102124: RNCC: 5 | RNVC: 2
(241)A39630-102124: RNCC: 5 | RNVC: 2

4 Jul 2000

5340-15-118-3384
Angle Bracket

151183384
60146776: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-100-1050
Angle Bracket

151001050
P-852552-002: RNCC: 3 | RNVC: 2
P852552-002: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-15-004-1523
Expansion Plug

150041523
1/43283/01: RNCC: 3 | RNVC: 2
14328301: RNCC: 5 | RNVC: 2
A120007-005: RNCC: 5 | RNVC: 2
1/43283/01: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-115-0361
Loop Clamp

151150361
W011983: RNCC: 3 | RNVC: 2
(7001)5340151150361: RNCC: 5 | RNVC: 2

27 Sep 1993

5340-15-121-7156
Protection Bellows

151217156
60-13532-00: RNCC: 3 | RNVC: 2

13 Aug 2001

5340-15-113-7352
Mounting Plate

151137352
SB-4274-11: RNCC: 3 | RNVC: 2

13 Feb 1992

5340-15-109-3691
Angle Bracket

151093691
5137-283-08: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-149-3057
Angle Bracket

151493057
4885515: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-187-3629
Self-Locking Insert

151873629
701/16506: RNCC: 3 | RNVC: 2
(241)AD751701/16506: RNCC: 5 | RNVC: 2
701/16506: RNCC: 5 | RNVC: 2

19 Mar 2009

5340-15-153-3946
Mending Plate

151533946
5137-351-01: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-001-6008
Mounting Bracket

150016008
42566668: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-006-4095
Expansion Plug

150064095
1-01600-01: RNCC: 3 | RNVC: 2
1-01600-01: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-109-3782
Support Hook

151093782
5176-226-08: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-121-9170
Catch Strike

151219170
4154067: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-179-7452
Loop Holder

151797452
98472616: RNCC: 3 | RNVC: 2
(241)A424998472616: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-207-6693
Mounting Bracket

152076693
185300101: RNCC: 3 | RNVC: 2
(241)A0199185300101: RNCC: 5 | RNVC: 2

9 Nov 2012

5340-15-201-4323
Roller Holder

152014323
500534915: RNCC: 3 | RNVC: 2
(241)A9172500534915: RNCC: 5 | RNVC: 2

5 Sep 2006

5340-15-119-0706
Loop Clamp

151190706
70925615: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-9128
Loop Clamp

151189128
70640676: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-2912
Loop Clamp

151532912
122505694: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-108-8378
Mending Plate

151088378
02558-1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-163-3744
Mounting Bracket

151633744
9435017: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-195-2546
Mounting Bracket

151952546
CPLB102B: RNCC: 3 | RNVC: 2
(241)AD330CPLB102B: RNCC: 5 | RNVC: 2

9 Mar 2011

5340-15-187-2006
Mounting Bracket

151872006
SC 100 633: RNCC: 3 | RNVC: 2
(241)A3980SC100633: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-113-4426
Butt Hinge Leaf

151134426
68-307101-017: RNCC: 3 | RNVC: 2

26 Aug 1991

5340-15-060-1499
Angle Bracket

150601499
1376-19-295: RNCC: 3 | RNVC: 2
137619295: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-116-7811
Access Cover

151167811
162-SCL-10DL: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-15-206-2968
Bow Handle

152062968
324M06010-101: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-178-4883
Mounting Bracket

151784883
500343591: RNCC: 3 | RNVC: 2
A462000-005: RNCC: 5 | RNVC: 2

1 Jul 2005

5340-15-065-8592
Loop Clamp

150658592
65.15.012.0: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-108-5231
Loop Clamp

151085231
4763804: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-111-8772
Mending Plate

151118772
43451.7: RNCC: 3 | RNVC: 2

8 Oct 1993

5340-15-008-5508
Retaining Strap

150085508
168237 F: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-060-2416
Butt Hinge

150602416
750483A: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-005-0506
Angle Bracket

150050506
0-33401: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-119-6746
Loop Clamp

151196746
CV12: RNCC: 3 | RNVC: 2

19 Oct 1994

5340-15-117-1977
Bridge Clamp

151171977
190509239: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-001-7999
Clevis And U-Bolt

150017999
8135864: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-058-3443
Rim Lock

150583443
P2626: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-152-8043
Mounting Bracket

151528043
P420221: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-202-8809
Loop Clamp

152028809
17770599: RNCC: 3 | RNVC: 2

10 Sep 2007

5340-15-149-3190
Loop Clamp

151493190
4886454: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-060-6048
Mending Plate

150606048
27176-101: RNCC: 3 | RNVC: 2

7 Jun 1977

5340-15-121-4617
Butt Hinge Leaf

151214617
213A7244-002: RNCC: 3 | RNVC: 2

21 Dec 1995

5340-15-151-4207
Loop Clamp

151514207
0-121840: RNCC: 3 | RNVC: 2
(241)A39630-121840: RNCC: 5 | RNVC: 2
1PA39630-121840: RNCC: 5 | RNVC: 2

24 May 2000

5340-15-066-0708
Retaining Strap

150660708
5941001: RNCC: 3 | RNVC: 2
5941001: RNCC: 5 | RNVC: 9

8 May 1985

5340-15-179-9896
Strap Hinge

151799896
2991100: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-002-2825
Loop Clamp

150022825
18181290: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-062-9055
Retaining Strap

150629055
0-55553: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-163-3655
Mounting Bracket

151633655
500325612: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-113-8619
Loop Clamp

151138619
1P 580566: RNCC: 3 | RNVC: 2
1P 580566: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-149-0699
Butt Hinge

151490699
970565: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-15-107-5060
Loop Clamp

151075060
8585923: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-059-4952
Mending Plate

150594952
114GS223-1001: RNCC: 3 | RNVC: 2

9 Jul 1975

5340-15-147-3395
Screw Thread Insert

151473395
M5X0-8CN2D35: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-198-8070
Catch Strike

151988070
504037355: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-157-9139
Bow Handle

151579139
0-153237: RNCC: 3 | RNVC: 2
(241)A39630-153237: RNCC: 5 | RNVC: 2
1PA39630-153237: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-178-7820
Mounting Plate

151787820
040682: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-119-1456
T Plate

151191456
73125838: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-180-3641
Mounting Bracket

151803641
2585856: RNCC: 3 | RNVC: 2
2585856: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-15-007-9952
Loop Clamp

150079952
4617402: RNCC: 3 | RNVC: 2

8 May 1998

5340-15-065-7712
Angle Bracket

150657712
W 005677: RNCC: 3 | RNVC: 2

1 Jul 1989

5340-15-062-6634
Retaining Strap

150626634
0-55227: RNCC: 3 | RNVC: 2

19 Jul 1982

5340-15-177-4061
Bridge Clamp

151774061
042923: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-002-8115
Mounting Bracket

150028115
504383491: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-118-6230
Protection Bellows

151186230
1076-19-478: RNCC: 3 | RNVC: 2
107619478: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-155-8497
Angle Bracket

151558497
6853 499-629: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-15-045-3839
Angle Bracket

150453839
781-12-13: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-061-5874
Angle Bracket

150615874
204-030-365-1215: RNCC: 3 | RNVC: 2

21 Dec 1977

5340-15-060-1721
Rod End Clevis

150601721
20608-101A1: RNCC: 3 | RNVC: 2
20608-101B1: RNCC: 5 | RNVC: 2

18 Jan 1977

5340-15-119-0133
Angle Bracket

151190133
70603157: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-100-7033
Rod End Clevis

151007033
808-91751-1: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-15-150-8891
Retaining Clip

151508891
D00T1327: RNCC: 3 | RNVC: 2
C00.1327: RNCC: 3 | RNVC: 2
(241)A3334C00.1327: RNCC: 4 | RNVC: 1

3 Feb 2000

5340-15-115-6249
Rod End Clevis

151156249
2209-22482: RNCC: 3 | RNVC: 2

17 Dec 1992

5340-15-004-3858
Rod End Clevis

150043858
0-20277: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-151-2762
Stand Base

151512762
541012750: RNCC: 3 | RNVC: 2
554101275000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-020-2444
Loop Clamp

150202444
01-097-02-12: RNCC: 3 | RNVC: 2
55.51.002.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-116-2074
Vent Plug

151162074
121103191: RNCC: 3 | RNVC: 2

25 Mar 1993

5340-15-178-7776
Access Cover

151787776
031100: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-065-1531
Angle Bracket

150651531
SC.135/144: RNCC: 3 | RNVC: 2

27 Jul 1984

5340-15-007-4231
Angle Bracket

150074231
P-110256-004: RNCC: 3 | RNVC: 2
P110256-004: RNCC: 5 | RNVC: 2

12 Mar 1980

5340-15-004-2364
Rod End Connector

150042364
260-14-13-1: RNCC: 3 | RNVC: 2
260-14-13-1: RNCC: 5 | RNVC: 9

30 May 1977

5340-15-204-3229
Bow Handle

152043229
0000500429809: RNCC: 3 | RNVC: 2
(241)A39630000500429809: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-194-7899
Lock Key

151947899
53137: RNCC: 3 | RNVC: 2
(241)A348853137: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-120-8693
Access Cover

151208693
109-0613-16-101: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-057-1140
Expansion Plug

150571140
N1-01592-00T14520: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-063-9935
Angle Bracket

150639935
1055-04-259: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-15-155-8215
Mending Plate

151558215
BN176/2: RNCC: 3 | RNVC: 2
42536896: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-15-052-6569
Loop Clamp

150526569
702228N: RNCC: 3 | RNVC: 2
T2M20: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-113-9430
Cushioning Pad

151139430
(241)A3649054104/1: RNCC: 3 | RNVC: 2
054104/1: RNCC: 3 | RNVC: 2
84.185.851/1: RNCC: 3 | RNVC: 2

7 Aug 1993

5340-15-001-1083
Mounting Bracket

150011083
5801350083: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-121-8958
Mending Plate

151218958
142503299: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-199-5065
Loop Clamp

151995065
CFG1-15/12: RNCC: 3 | RNVC: 2
162505277: RNCC: 5 | RNVC: 2

13 Apr 2005

5340-15-120-0934
Retaining Band

151200934
41801117: RNCC: 3 | RNVC: 2
116756: RNCC: 4 | RNVC: 1
0-116756: RNCC: 4 | RNVC: 1
041801117: RNCC: 4 | RNVC: 1
41801117: RNCC: 5 | RNVC: 2
(241)A396300116756: RNCC: 5 | RNVC: 2
(241)A3963116756: RNCC: 5 | RNVC: 2
1PA39630-116756: RNCC: 5 | RNVC: 2

19 Dec 1994

5340-15-101-9561
Mortise Latch Set

151019561
M840-12-71: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-154-1981
Angle Bracket

151541981
0-167319: RNCC: 3 | RNVC: 2
1PA39630-167319: RNCC: 5 | RNVC: 2
(241)A39630-167319: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-004-1527
Expansion Plug

150041527
1/43299/01: RNCC: 3 | RNVC: 2
14329901: RNCC: 5 | RNVC: 2
1/43299/01: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-045-2933
Loop Clamp

150452933
N0R2-505-06-25B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-102-1202
Retaining Band

151021202
V44/1-03-205: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-003-2230
Angle Bracket

150032230
969068: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-153-3179
Catch Strike

151533179
162505197: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-15-119-5677
Mending Plate

151195677
4881338: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-059-3535
Retaining Strap

150593535
1127-32-257: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-045-2930
Loop Clamp

150452930
N0R2-505-06-19B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-100-5062
Webbing Strap

151005062
000900278000: RNCC: 5 | RNVC: 2
000900278000: RNCC: 5 | RNVC: 9

22 Apr 1987

5340-15-001-8434
Mounting Bracket

150018434
500436150: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-170-5576
Handle Grip

151705576
A9-11423-04: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-119-2518
Butt Hinge

151192518
311A2906-002: RNCC: 3 | RNVC: 2

5 Jul 1994

5340-15-100-1848
Loop Clamp

151001848
2352000012: RNCC: 3 | RNVC: 2

24 May 1994

5340-15-151-2763
Stand Base

151512763
541012760: RNCC: 3 | RNVC: 2
554101276000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-158-5856
Handle Grip

151585856
PL20-M4: RNCC: 3 | RNVC: 2
122607377: RNCC: 4 | RNVC: 1
(241)A0199122607377: RNCC: 5 | RNVC: 2

9 Mar 2004

5340-15-007-4236
Angle Bracket

150074236
P-110257-004: RNCC: 3 | RNVC: 2
P110257-004: RNCC: 5 | RNVC: 2

12 Mar 1980

5340-15-108-8459
Plain Solid Disk

151088459
02470: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-168-8466
Coat And Hat Hook

151688466
C90248691: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-101-8470
Retaining Strap

151018470
000200074600: RNCC: 5 | RNVC: 2
000200074600: RNCC: 5 | RNVC: 9

10 Jan 1988

5340-15-180-0759
Detent Plunger

151800759
441SPK2: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-151-4189
Mending Plate

151514189
0-102902: RNCC: 3 | RNVC: 2

23 May 2000

5340-15-120-4521
Access Cover

151204521
142505187: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-177-4027
Loop Clamp

151774027
042006: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-118-9157
Loop Clamp

151189157
70622897: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-050-9238
Retaining Clip

150509238
3T18826-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-153-5194
Access Cover

151535194
142018223: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-150-3877
Retaining Band

151503877
UA29022-07P: RNCC: 3 | RNVC: 2

18 Oct 1999

5340-15-119-5611
Loop Clamp

151195611
4871771: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-206-3514
Corner Brace

152063514
50040 2105: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-110-0916
Retaining Strap

151100916
A6107-99622-109: RNCC: 3 | RNVC: 2

21 Jun 1996

5340-15-198-7571
Corner Brace

151987571
129-0640-50-223: RNCC: 3 | RNVC: 2
(241)A0126129-0640-50-223: RNCC: 5 | RNVC: 2

16 Nov 2004

5340-15-115-3522
Retaining Strap

151153522
538-16-1550: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-068-5793
Expansion Plug

150685793
74658F01: RNCC: 3 | RNVC: 2
74658F01: RNCC: 5 | RNVC: 2

10 Apr 1986

5340-15-002-2601
Loop Clamp

150022601
482700000/272: RNCC: 3 | RNVC: 2

30 Jul 2013

5340-15-005-4987
Retaining Strap

150054987
JJ72178: RNCC: 3 | RNVC: 2

9 Apr 1979

5340-15-168-9630
Coat And Hat Hook

151689630
F72003365: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-057-2922
Screw Thread Insert

150572922
1276-09-281: RNCC: 3 | RNVC: 2
RJ313SB18L: RNCC: 5 | RNVC: 2
127609281: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-157-2628
Access Cover

151572628
J52451338-001: RNCC: 3 | RNVC: 2

12 Jun 2003

5340-15-005-5344
Mending Plate

150055344
1026-02-183: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-204-1148
Mounting Bracket

152041148
0.011.7376.2: RNCC: 3 | RNVC: 2

6 Sep 2011

5340-15-120-0259
Loop Clamp

151200259
588526: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-150-6018
Angle Bracket

151506018
105941: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-151-2131
Mounting Bracket

151512131
00084970: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-15-112-3469
Spring Tension Clip

151123469
93917014: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-205-4652
Rod End Clevis

152054652
42540974: RNCC: 3 | RNVC: 2
(241)A424942540974: RNCC: 5 | RNVC: 2

12 Mar 2012

5340-15-149-9085
Plain Solid Disk

151499085
70-SP.5: RNCC: 3 | RNVC: 2

19 Jul 1999

5340-15-154-2245
Hand Crank Arm

151542245
60174094: RNCC: 3 | RNVC: 2
1PA424960174094: RNCC: 8 | RNVC: 2

28 Mar 2001

5340-15-122-0548
Mounting Bracket

151220548
98476443: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-112-0309
Loop Clamp

151120309
26-6-21-15B: RNCC: 3 | RNVC: 2

1 Jun 1991

5340-15-116-3544
Retaining Band

151163544
3M423N0180: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-15-158-5772
Protection Bellows

151585772
122603630: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-005-2833
Retaining Strap

150052833
1377983: RNCC: 3 | RNVC: 2
1377983: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-003-3810
Loop Clamp

150033810
ED0085455660-S: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-118-8598
Mounting Bracket

151188598
299701675H: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-122-2150
Loop Clamp

151222150
800053724: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-103-8712
Loop Clamp

151038712
10441190: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-121-6714
Mounting Bracket

151216714
800073459: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-063-5665
Retaining Band

150635665
SF260-04-30-6: RNCC: 3 | RNVC: 2
SF260-04-30-6: RNCC: 5 | RNVC: 9

5 Apr 1983

5340-15-062-7906
Retaining Strap

150627906
0-34155: RNCC: 3 | RNVC: 2
1PA39630-34155: RNCC: 5 | RNVC: 2

28 Aug 1982

5340-15-193-2865
Filler Opening Cap

151932865
TR-1: RNCC: 3 | RNVC: 2

27 Apr 2010

5340-15-060-2322
Retaining Strap

150602322
709207Z: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-113-9299
Handle Grip

151139299
BL.368/10X107: RNCC: 3 | RNVC: 2

10 May 1993

5340-15-061-2655
Angle Bracket

150612655
018200101600: RNCC: 5 | RNVC: 2
018200101600: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-061-5058
Mending Plate

150615058
P26CB26: RNCC: 5 | RNVC: 2
P26CB26: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-153-7359
Handle Grip

151537359
142057257: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-003-8906
Access Cover

150038906
182714130: RNCC: 3 | RNVC: 2
(241)A0199182714130: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-108-4203
Expansion Plug

151084203
14282770: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-179-8947
Spring Holder

151798947
D1403647: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-065-6005
Retaining Strap

150656005
109-0506-45-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-004-5808
Angle Bracket

150045808
4-3059-101-46776-2: RNCC: 3 | RNVC: 2

12 Jul 1978

5340-15-157-5347
Loop Clamp

151575347
11222-14: RNCC: 2 | RNVC: 3

19 Sep 2003

5340-15-193-9788
Access Cover

151939788
154227212: RNCC: 3 | RNVC: 2

10 Aug 2010

5340-15-060-6076
Retaining Strap

150606076
62659-101B1: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-15-149-8637
Tubular Fairlead

151498637
113580-00: RNCC: 3 | RNVC: 2

15 Jun 1999

5340-15-001-3374
Bow Handle

150013374
504375598: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-074-3941
Retaining Strap

150743941
C7UNAV1043A37UNI743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-157-9278
Angle Bracket

151579278
0-171567: RNCC: 3 | RNVC: 2
00171567: RNCC: 3 | RNVC: 2
(241)A39630-171567: RNCC: 5 | RNVC: 2
1PA39630-171567: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-002-7842
Mounting Bracket

150027842
E200: RNCC: 3 | RNVC: 2

2 Oct 2013

5340-15-201-4320
Roller Holder

152014320
500534913: RNCC: 3 | RNVC: 2
(241)A9172500534913: RNCC: 5 | RNVC: 2

5 Sep 2006

5340-15-151-2165
Loop Clamp

151512165
00085198: RNCC: 3 | RNVC: 2

28 Apr 2000

5340-15-074-3306
Retaining Strap

150743306
A14UNAV1046A37UN1743: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-067-4235
Retaining Bail

150674235
064-1P316869: RNCC: 2 | RNVC: 2
064-1P316869: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-15-074-3956
Retaining Strap

150743956
10UNI2134CD: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-119-0264
Loop Clamp

151190264
70686185: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-187-8205
Mounting Bracket

151878205
018.066.00.40_SX: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.40_SX: RNCC: 5 | RNVC: 2
018.066.00.40_SX: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-207-1032
Access Cover

152071032
552607011000: RNCC: 3 | RNVC: 2
(241)A1140552607011000: RNCC: 5 | RNVC: 2

4 Sep 2012

5340-15-203-6935
Mounting Plate

152036935
2940575: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-15-120-6639
Handle Grip

151206639
I222/70: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-109-1829
Mending Plate

151091829
1357235: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-103-6757
Lock-Release Lever

151036757
24009411A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-207-8592
Clamping Catch

152078592
504361026: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-158-5715
Access Cover

151585715
122621330: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-063-2834
Angle Bracket

150632834
60110293: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-221-6966
Door Closer

152216966
5340RI0990439: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-001-5541
Access Cover

150015541
182719039: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-074-3937
Retaining Strap

150743937
B18UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-200-3005
Clamping Catch

152003005
190509426: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-15-105-2176
Mending Plate

151052176
593763: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-198-9878
Threaded Rod End

151989878
165008549: RNCC: 3 | RNVC: 2
(241)A0199165008549: RNCC: 5 | RNVC: 2

20 Dec 2004

5340-15-112-9351
Mending Plate

151129351
20512247A: RNCC: 3 | RNVC: 2

20 Apr 1996

5340-15-009-6381
Mending Plate

150096381
174163P1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-120-8113
Angle Bracket

151208113
127463: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-062-2740
Mending Plate

150622740
1141-31-155: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-121-9904
Bow Handle

151219904
60177060: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-143-8431
Handle Grip

151438431
1702041: RNCC: 3 | RNVC: 2
81702041: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-119-6392
Angle Bracket

151196392
60151324: RNCC: 3 | RNVC: 2

6 Oct 1994

5340-15-002-8145
Mounting Plate

150028145
5801359273: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-100-5568
Bow Handle

151005568
39A525-12-27: RNCC: 3 | RNVC: 2

11 Mar 1987

5340-15-179-7352
Loop Clamp

151797352
504000063: RNCC: 3 | RNVC: 2
(241)A4249504000063: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-149-2870
Angle Bracket

151492870
4838772: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-063-3751
Angle Bracket

150633751
60114152: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-103-1357
Mending Plate

151031357
DE013.13.279: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-103-0695
Screw Thread Insert

151030695
037.21.036: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-116-7909
Plain Solid Disk

151167909
DPR24136/1-32: RNCC: 3 | RNVC: 2

29 Nov 1993

5340-15-157-9763
Handle Grip

151579763
J92740450-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-162-4246
Mounting Bracket

151624246
A151115-1: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-15-153-9597
Loop Clamp

151539597
G70/90UNI9209ACC.INOX-ZN: RNCC: 3 | RNVC: 2
230026537: RNCC: 5 | RNVC: 2

12 Mar 2001

5340-15-119-5574
Mending Plate

151195574
4881597: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-007-2187
Retaining Strap

150072187
1395593: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-7067
Angle Bracket

151187067
73132787: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-177-4623
Plain Solid Disk

151774623
W031675: RNCC: 3 | RNVC: 2
(241)A2309W031675: RNCC: 5 | RNVC: 2

5 Mar 2004

5340-15-061-5894
Retaining Strap

150615894
1385745: RNCC: 3 | RNVC: 2
1385745: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-121-0976
Catch Strike

151210976
RC1736: RNCC: 3 | RNVC: 2

23 Jan 1996

5340-15-181-0274
Snap Hook

151810274
472.C1: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-15-203-4595
Mounting Bracket

152034595
1090/858: RNCC: 3 | RNVC: 2
(241)AG5901090/858: RNCC: 5 | RNVC: 2
1090/858: RNCC: 5 | RNVC: 2

4 Feb 2008

5340-15-064-7801
Plug Button

150647801
840.134: RNCC: 3 | RNVC: 2
9981039: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-157-9162
Angle Bracket

151579162
0-161499: RNCC: 3 | RNVC: 2
(241)A39630-161499: RNCC: 5 | RNVC: 2
1PA39630-161499: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-121-4622
Butt Hinge Leaf

151214622
211A7173-001: RNCC: 3 | RNVC: 2

21 Dec 1995

5340-15-060-2922
Loop Clamp

150602922
MODELLO 1: RNCC: 3 | RNVC: 2
1376-18-442: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-009-3002
Butt Hinge Leaf

150093002
2-54723-107-73710: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-15-068-4386
Access Door Hinge

150684386
SH 3688-401: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-162-9677
Mounting Plate

151629677
6022036: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-15-163-4084
Loop Clamp

151634084
9984278: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-118-0931
Loop Clamp

151180931
D0488298: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-15-119-9043
Mending Plate

151199043
142004195: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-155-1204
Access Cover

151551204
142038136: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-205-4187
Retaining Strap

152054187
178904747: RNCC: 3 | RNVC: 2
(241)A0199178904747: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-111-4194
Angle Bracket

151114194
329162P2: RNCC: 3 | RNVC: 2
329162P2: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-155-8485
Angle Bracket

151558485
6853 499-294: RNCC: 3 | RNVC: 2

7 Aug 2002

5340-15-060-6386
Mending Plate

150606386
27241-101: RNCC: 3 | RNVC: 2

4 Jul 1977

5340-15-117-4880
Retaining Strap

151174880
21367-002D00: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-15-206-2967
Rod End Clevis

152062967
324AM06280-101: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-103-3230
Angle Bracket

151033230
109-0605-24-12: RNCC: 3 | RNVC: 2

14 Feb 1989

5340-15-007-8975
Expansion Plug

150078975
1-42823-70: RNCC: 3 | RNVC: 2
14282370: RNCC: 5 | RNVC: 2
0-48283: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-153-7437
Clamping Catch

151537437
142062153: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-110-7156
Retaining Strap

151107156
69565-001A00: RNCC: 3 | RNVC: 2
69565-001: RNCC: 5 | RNVC: 2

25 Jul 1990

5340-15-045-4260
Loop Clamp

150454260
N0R2-505-07-15E5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-117-1864
Leather Strap

151171864
92793/41-CNI4201/00141: RNCC: 3 | RNVC: 2

28 Apr 1994

5340-15-065-1240
Bow Handle

150651240
B515/M-CB-024: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-156-1905
Angle Bracket

151561905
60166965: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-179-6944
Angle Bracket

151796944
0000500413627: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-205-8610
Shimmy Damper

152058610
5801380340: RNCC: 3 | RNVC: 2

6 Apr 2012

5340-15-152-7954
Mounting Plate

151527954
P200202: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-001-1148
Mounting Plate

150011148
504217093: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-119-4182
Mending Plate

151194182
TIPO PNF: RNCC: 3 | RNVC: 2
142503289: RNCC: 5 | RNVC: 2

26 Jul 1994

5340-15-003-1354
Angle Bracket

150031354
500400472: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-205-4956
Mounting Bracket

152054956
SBP-300WM1: RNCC: 3 | RNVC: 2
(241)AA201SBP-300WM1: RNCC: 5 | RNVC: 2

14 Mar 2012

5340-15-059-6810
Rod End Clevis

150596810
04392-101: RNCC: 3 | RNVC: 2

12 May 1976

5340-15-122-0841
Angle Bracket

151220841
R6 0042070271: RNCC: 3 | RNVC: 2

25 Apr 1996

5340-15-003-7537
Metal Grille

150037537
00046: RNCC: 3 | RNVC: 2

20 Nov 2013

5340-15-042-6310
Handle Grip

150426310
9169-32: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-148-1567
Angle Bracket

151481567
98450774: RNCC: 3 | RNVC: 2
98450774: RNCC: 5 | RNVC: 2

25 Jun 1998

5340-15-116-4783
Mending Plate

151164783
60168212: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-135-4844
Angle Bracket

151354844
4450789: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-121-5619
Access Cover

151215619
1P 553081: RNCC: 3 | RNVC: 2
1P 553081: RNCC: 5 | RNVC: 9

12 Sep 1996

5340-15-103-6625
Hand Crank

151036625
24009182A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-147-7816
Door-Hatch Dog

151477816
1322121F01: RNCC: 3 | RNVC: 2
321004F91 FIG. 23: RNCC: 5 | RNVC: 1

10 Apr 1998

5340-15-001-7860
Mounting Bracket

150017860
5949786958: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-153-0499
Stand Base

151530499
45211904000: RNCC: 5 | RNVC: 2
45211904000: RNCC: 5 | RNVC: 9

15 Nov 2000

5340-15-001-7906
Mounting Bracket

150017906
5949790514: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-157-5325
Loop Clamp

151575325
11141-13: RNCC: 2 | RNVC: 3

19 Sep 2003

5340-15-148-9831
Expansion Plug

151489831
592 10: RNCC: 3 | RNVC: 2
592 10: RNCC: 5 | RNVC: 9

9 Nov 1998

5340-15-118-8612
Access Cover

151188612
299709297F: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-074-3970
Retaining Strap

150743970
8UNI2135CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-066-3814
Cushioning Pad

150663814
GA2: RNCC: 3 | RNVC: 2

29 Apr 1988

5340-15-108-5690
Butt Hinge Leaf

151085690
93919448: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-007-1896
Retaining Strap

150071896
1390669: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-064-7217
Rod End Clevis

150647217
60115156: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-151-2811
Mending Plate

151512811
541061620: RNCC: 3 | RNVC: 2
554106162000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-003-9128
Mounting Plate

150039128
182741332: RNCC: 3 | RNVC: 2
(241)A0199182741332: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-108-6274
Retaining Strap

151086274
60139848: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-193-4490
Door Hook

151934490
504290963: RNCC: 3 | RNVC: 2
(241)A4249504290963: RNCC: 5 | RNVC: 2

13 May 2010

5340-15-113-2890
Angle Bracket

151132890
1Z 591188: RNCC: 3 | RNVC: 2
1Z 591188: RNCC: 5 | RNVC: 9

3 Dec 1993

5340-15-003-5110
Angle Bracket

150035110
4509604: RNCC: 3 | RNVC: 2
4509604: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-151-9988
Angle Bracket

151519988
60120780: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-064-1832
Rod End Clevis

150641832
03172-103: RNCC: 3 | RNVC: 2

1 Mar 1984

5340-15-119-0096
Rod End Clevis

151190096
70068389: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-110-5737
Retaining Strap

151105737
1P 529307: RNCC: 3 | RNVC: 2
1P 529307: RNCC: 5 | RNVC: 9

15 Oct 1996

5340-15-148-3527
Mending Plate

151483527
151822: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-105-8983
Spring Tension Clip

151058983
12.512.746: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-001-9845
Expansion Shield

150019845
0904744: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-147-8727
Access Cover

151478727
121607: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-063-7521
Mending Plate

150637521
40.60.01.325: RNCC: 3 | RNVC: 2
95.18.70.08: RNCC: 5 | RNVC: 2

10 May 1983

5340-15-001-3618
Hand Crank

150013618
74-202560A: RNCC: 3 | RNVC: 2

25 Jun 2013

5340-15-152-7971
Mounting Bracket

151527971
P200317: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-162-2530
Mounting Bracket

151622530
125362: RNCC: 3 | RNVC: 2
S5240359: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-162-2663
Loop Clamp

151622663
29.11.38.10: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-119-2294
Angle Bracket

151192294
109-0518-04-123: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-065-8093
Angle Bracket

150658093
FL1555-105: RNCC: 3 | RNVC: 2

24 Oct 1985

5340-15-116-8446
Handle Grip

151168446
ISI 100: RNCC: 3 | RNVC: 2

24 Jan 1994

5340-15-109-7412
Angle Bracket

151097412
60134000: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-204-3503
Snap Hook

152043503
25100180: RNCC: 3 | RNVC: 2
(241)ACA6425100180: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-005-5102
Retaining Strap

150055102
4392382: RNCC: 3 | RNVC: 2
4392382: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-127-3797
Retaining Ring

151273797
1356-66-045: RNCC: 3 | RNVC: 2
1356-66-045: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-009-7298
Expansion Plug

150097298
16UNI1663C7UNI3145: RNCC: 2 | RNVC: 2
2300-23-305: RNCC: 5 | RNVC: 2
230023305: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-204-8310
Retaining Band

152048310
5210/CE: RNCC: 3 | RNVC: 2
(241)AK0625210/CE: RNCC: 5 | RNVC: 2

13 Jan 2012

5340-15-061-5061
Mending Plate

150615061
P26CB27: RNCC: 5 | RNVC: 2
P26CB27: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-065-2694
Retaining Strap

150652694
W 008549A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-177-4106
Access Cover

151774106
045699: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-206-3553
Mounting Bracket

152063553
50040 4748: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-150-1072
Mounting Bracket

151501072
120015411: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-178-9902
T Bracket

151789902
RS 302 652: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-108-5213
Butt Hinge Leaf

151085213
60122100: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-198-7917
Catch Strike

151987917
60188366: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-118-1680
Filler Opening Cap

151181680
21770076F: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-15-100-1046
Angle Bracket

151001046
P-882722-003: RNCC: 3 | RNVC: 2
P882722-003: RNCC: 5 | RNVC: 2

22 Oct 1986

5340-15-007-6267
Angle Bracket

150076267
P-135575-007: RNCC: 3 | RNVC: 2
P135575-007: RNCC: 5 | RNVC: 2

12 Mar 1980

5340-15-207-1922
Corner Brace

152071922
482700000/221: RNCC: 3 | RNVC: 2
(241)A0199482700000/221: RNCC: 5 | RNVC: 2

20 Sep 2012

5340-15-109-1533
Mending Plate

151091533
100900329850: RNCC: 5 | RNVC: 2
100900329850: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-15-116-1618
Retaining Strap

151161618
08227-101B00: RNCC: 3 | RNVC: 2

17 Mar 1993

5340-15-118-2016
Loop Clamp

151182016
17315690: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-193-0289
Loop Clamp

151930289
504050477: RNCC: 3 | RNVC: 2
(241)A4249504050477: RNCC: 5 | RNVC: 2

6 Apr 2010

5340-15-207-4796
Loop Clamp

152074796
1578: RNCC: 3 | RNVC: 2
(241)A39601578: RNCC: 5 | RNVC: 2

17 Oct 2012

5340-15-065-8579
Loop Clamp

150658579
50.45.007.0: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-201-0620
Loop Clamp

152010620
EN4114F32WR1: RNCC: 2 | RNVC: 2
(241)I9005EN4114F32WR1: RNCC: 5 | RNVC: 2

16 May 2006

5340-15-197-1760
Rim Lock Set

151971760
PN UAS 00004433: RNCC: 3 | RNVC: 2
5340F76000512: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-051-3780
Retaining Ring

150513780
9913593: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-200-4502
Mounting Bracket

152004502
920-7548/02: RNCC: 3 | RNVC: 2
(241)A4582920-7548/02: RNCC: 5 | RNVC: 2

23 Jan 2006

5340-15-188-4360
Access Cover

151884360
P-894878-003: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-15-187-4052
Synchro Clamp

151874052
8690498: RNCC: 3 | RNVC: 2

27 Mar 2009

5340-15-195-8134
Hand Crank

151958134
152462: RNCC: 3 | RNVC: 2
(241)AJ611152462: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-109-1261
Retaining Band

151091261
14567787: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-002-6024
Loop Clamp

150026024
649: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-152-7978
Mounting Bracket

151527978
P200506: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-112-9379
Loop Clamp

151129379
21612020A: RNCC: 3 | RNVC: 2

20 Apr 1996

5340-15-113-0841
Retaining Strap

151130841
67818-800: RNCC: 3 | RNVC: 2

9 May 1991

5340-15-151-0450
Loop Clamp

151510450
0-105517: RNCC: 3 | RNVC: 2
(241)A39630-105517: RNCC: 5 | RNVC: 2
1PA39630-105517: RNCC: 5 | RNVC: 2

2 Mar 2000

5340-15-063-2517
Butt Hinge Leaf

150632517
A1-23001-785: RNCC: 3 | RNVC: 2
A1-23001-785: RNCC: 5 | RNVC: 9

28 Jan 1983

5340-15-153-3907
Angle Bracket

151533907
5137-319-05: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-059-4058
Spring Tension Clip

150594058
7-62771-101-75551: RNCC: 3 | RNVC: 2

28 Oct 1975

5340-15-006-5362
Bail Handle

150065362
075201137500: RNCC: 5 | RNVC: 2
075201137500: RNCC: 5 | RNVC: 9

29 Jun 1979

5340-15-197-2105
Expansion Shield

151972105
PN UAS 00044068: RNCC: 3 | RNVC: 2
3470F76036647: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-175-0093
Suction Cup

151750093
SL24010: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-15-112-4029
Access Cover

151124029
R105220: RNCC: 3 | RNVC: 2

2 Nov 1995

5340-15-113-6245
Mending Plate

151136245
8198782: RNCC: 3 | RNVC: 2
(7001)5340151136245: RNCC: 5 | RNVC: 2

29 Jan 1992

5340-15-060-5693
Mending Plate

150605693
22292-102: RNCC: 3 | RNVC: 2

1 Jun 1977

5340-15-154-1995
Angle Bracket

151541995
0-168014: RNCC: 3 | RNVC: 2
(241)A39630-168014: RNCC: 5 | RNVC: 2
1PA39630-168014: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-056-0110
Screw Thread Insert

150560110
2106-02542: RNCC: 3 | RNVC: 2
M 12 X175 1,5D: RNCC: 5 | RNVC: 2
2100-06-327: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-151-5428
Filler Opening Cap

151515428
042485421: RNCC: 3 | RNVC: 2
00112131: RNCC: 4 | RNVC: 1
(241)A39630-112131: RNCC: 5 | RNVC: 2
(241)A396300112131: RNCC: 5 | RNVC: 2
0-112131: RNCC: 5 | RNVC: 2
1PA39630-112131: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-169-3212
Angle Bracket

151693212
F72010578: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-063-3230
Retaining Strap

150633230
60108094: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-122-0559
Rod End Connector

151220559
28009GR91: RNCC: 3 | RNVC: 2
28009GR91: RNCC: 5 | RNVC: 9

23 Apr 1996

5340-15-207-3710
Mounting Plate

152073710
504337182: RNCC: 3 | RNVC: 2
B009039: RNCC: 5 | RNVC: 2

10 Oct 2012

5340-15-207-5966
Retaining Strap

152075966
178904749: RNCC: 3 | RNVC: 2
(241)A0199178904749: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-175-0763
Compression Cup

151750763
312100F01: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-162-2383
Access Cover

151622383
121104: RNCC: 3 | RNVC: 2
B4540385: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-114-6467
Angle Bracket

151146467
219ASK033-101: RNCC: 3 | RNVC: 2

25 Jun 1992

5340-15-051-3169
Loop Clamp

150513169
1-01158-05: RNCC: 3 | RNVC: 2
10115805: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-109-0158
Catch Strike

151090158
1358699: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-122-0562
Rod End Connector

151220562
28009-90: RNCC: 3 | RNVC: 2
28009-90: RNCC: 5 | RNVC: 9

23 Apr 1996

5340-15-119-7187
Angle Bracket

151197187
4881557: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-119-7158
Angle Bracket

151197158
60173013: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-179-9459
Angle Bracket

151799459
0000500410826: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-101-4732
Plain Solid Disk

151014732
028200075500: RNCC: 5 | RNVC: 2
028200075500: RNCC: 5 | RNVC: 9

10 Apr 1987

5340-15-057-4397
Retaining Band

150574397
204-9000-07-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-5594
Access Cover

151205594
109-0321-42-102: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-118-7601
Access Cover

151187601
9441334: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-064-7628
Rod End Clevis

150647628
23.67.51.00: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-15-206-4026
Caster Wheel

152064026
030000206: RNCC: 3 | RNVC: 2
(241)A0873030000206: RNCC: 5 | RNVC: 2

6 Jun 2012

5340-15-194-3715
Mortise Lock

151943715
79073382: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-178-7804
Lever Bracket

151787804
041140: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-193-1789
Expansion Shield

151931789
1100828: RNCC: 3 | RNVC: 2
(241)AA1361100828: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-151-4769
Angle Bracket

151514769
0-168341: RNCC: 3 | RNVC: 2
(241)A39630-168341: RNCC: 5 | RNVC: 2
1PA39630-168341: RNCC: 5 | RNVC: 2

30 May 2000

5340-15-074-3946
Retaining Strap

150743946
C16UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-008-0572
Rod End Clevis

150080572
1396170: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-054-3431
Lever Bracket

150543431
526373: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-187-3017
Retaining Band

151873017
UZ35441019: RNCC: 3 | RNVC: 2
(241)A9410UZ35441019: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-176-2272
Angle Bracket

151762272
EXRN0804932: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-206-3504
Mounting Plate

152063504
50040 1040: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-065-1248
Bow Handle

150651248
B515/M-FM-106: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-133-4367
Angle Bracket

151334367
4174618: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-152-2293
Mending Plate

151522293
42531940: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-15-116-4763
Butt Hinge Leaf

151164763
60165630: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-163-7977
Handle Grip

151637977
75385128: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-109-8708
Angle Bracket

151098708
60111284: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-231-9643
Handle Grip

152319643
42021768: RNCC: 3 | RNVC: 2
251015E156833: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-117-6863
Support Hook

151176863
142502461: RNCC: 3 | RNVC: 2

12 Jan 1994

5340-15-152-0162
Angle Bracket

151520162
0-161173: RNCC: 3 | RNVC: 2
00161173: RNCC: 3 | RNVC: 2
(241)A39630-161173: RNCC: 5 | RNVC: 2

2 Aug 2000

5340-15-062-3245
Mending Plate

150623245
1141-31-132: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-177-3797
Mounting Plate

151773797
030808: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-148-9087
Access Cover

151489087
4823303: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-15-118-8616
Access Cover

151188616
299709561F: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-058-6112
Clamping Catch

150586112
4-17680D: RNCC: 5 | RNVC: 2
4-17680D: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-100-0530
Loop Clamp

151000530
587332016N: RNCC: 3 | RNVC: 2

15 Apr 1986

5340-15-009-5733
Retaining Strap

150095733
607942: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-003-1415
Angle Bracket

150031415
5949792189: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-150-1901
Retaining Strap

151501901
A0008924: RNCC: 3 | RNVC: 2

25 Aug 1999

5340-15-180-0152
Access Cover

151800152
D1403823: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-215-2098
Angle Bracket

152152098
42062048: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-205-8624
Expansion Shield

152058624
5801397234: RNCC: 3 | RNVC: 2

6 Apr 2012

5340-15-110-7871
Mending Plate

151107871
60109274: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-063-5093
Angle Bracket

150635093
60111602: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-148-9896
Access Cover

151489896
FE SD6/AC(YG3)-SAE: RNCC: 3 | RNVC: 2

9 Nov 1998

5340-15-128-4083
Handle Grip

151284083
IMMCRT: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-7033
Access Cover

151187033
73128966: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-204-9009
Access Cover

152049009
71.1600.22: RNCC: 3 | RNVC: 2

25 Jan 2012

5340-15-107-5066
Spring Tension Clip

151075066
60139555: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-107-4474
Ball Socket Seat

151074474
1Q 199634: RNCC: 3 | RNVC: 2
1Q 199634: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-103-1110
Leather Strap

151031110
DE013.13.370: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.370: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-231-8311
Handle Grip

152318311
8195677: RNCC: 3 | RNVC: 2
534015E065942: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-108-3259
Mending Plate

151083259
60120280: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-051-5080
Retaining Strap

150515080
TA104C: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-000-4339
Retaining Band

150004339
4260076300N: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-063-4776
Retaining Band

150634776
2532716: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-074-3950
Retaining Strap

150743950
C24UNAV1046A37UN1743CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-118-4495
Angle Bracket

151184495
60154195: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-151-5328
Retaining Strap

151515328
0-106145: RNCC: 3 | RNVC: 2
1PA39630-106145: RNCC: 5 | RNVC: 2
(241)A39630-106145: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-147-3657
Access Cover

151473657
109-0745-93-105: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-109-7459
Retaining Strap

151097459
60125127: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-116-4752
Butt Hinge Leaf

151164752
60151179: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-104-4371
Expansion Plug

151044371
14328501: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-007-4976
Loop Clamp

150074976
2300-23918: RNCC: 3 | RNVC: 2
230023918: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-109-2018
Mending Plate

151092018
4831139: RNCC: 3 | RNVC: 2

23 Feb 1989

5340-15-108-3131
Handle Grip

151083131
42032410: RNCC: 3 | RNVC: 2
(241)AF90842032410: RNCC: 5 | RNVC: 2
42032410: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-179-5511
Angle Bracket

151795511
71-13499: RNCC: 3 | RNVC: 2
(241)A331471-13499: RNCC: 5 | RNVC: 2

2 Mar 2007

5340-15-119-2384
Mounting Bracket

151192384
129-0340-54-101: RNCC: 3 | RNVC: 2

5 Jul 1994

5340-15-120-0863
Angle Bracket

151200863
60164938: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-063-3205
Angle Bracket

150633205
60104918: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-214-7226
Angle Bracket

152147226
MENSOLAPLAST: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-005-2835
Retaining Strap

150052835
4392268: RNCC: 3 | RNVC: 2
4392268: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-053-5673
Handle Grip

150535673
30-3762-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-154-4031
Corner Brace

151544031
A6120-91093-12: RNCC: 3 | RNVC: 2

22 May 2001

5340-15-102-0855
Clamping Catch

151020855
193-0487/22: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-101-6994
Angle Bracket

151016994
246-004/37: RNCC: 3 | RNVC: 2
246-004/37: RNCC: 5 | RNVC: 9

30 Apr 1987

5340-15-189-0523
Protection Bellows

151890523
0-122466: RNCC: 3 | RNVC: 2
00122466: RNCC: 3 | RNVC: 2
(241)A396300122466: RNCC: 5 | RNVC: 2

21 Jan 2010

5340-15-054-8177
Rod End Clevis

150548177
AF106-05A92: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-204-5547
Mounting Bracket

152045547
ICA-PLB104B: RNCC: 3 | RNVC: 2
(241)AJ833ICA-PLB104B: RNCC: 5 | RNVC: 2

18 Nov 2011

5340-15-045-3566
Retaining Strap

150453566
740-20-14: RNCC: 3 | RNVC: 2

1 Jan 1974

Load More Results