What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 8 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 8 of 72

5340-15-120-2254
Access Cover

151202254
60155043: RNCC: 3 | RNVC: 2

27 Feb 1995

5340-15-045-2926
Loop Clamp

150452926
N0R2-505-06-14B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-061-4111
Angle Bracket

150614111
P-125265-001: RNCC: 3 | RNVC: 2
P125265-001: RNCC: 5 | RNVC: 2

19 Jan 1978

5340-15-153-7749
Access Cover

151537749
02700A135520: RNCC: 5 | RNVC: 2
02700A135520: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-120-4464
Mending Plate

151204464
132508138: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-073-5249
Flush Lock

150735249
13A65X80-1LEVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-196-6201
Rim Lock Set

151966201
PN UAS 00041580: RNCC: 3 | RNVC: 2
5340F76034846: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-201-9276
Retaining Band

152019276
BMM 2036: RNCC: 3 | RNVC: 2
(241)A9260BMM 2036: RNCC: 5 | RNVC: 2

15 Jan 2007

5340-15-169-3052
Angle Bracket

151693052
F72010431: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-073-5247
Flush Lock

150735247
13A65X60-1LEVA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-193-3816
Loop Clamp

151933816
504269858: RNCC: 3 | RNVC: 2
(241)A4249504269858: RNCC: 5 | RNVC: 2

11 May 2010

5340-15-103-1113
Leather Strap

151031113
DE013.13.373: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.373: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-195-7083
Padlock

151957083
22011-50-0: RNCC: 3 | RNVC: 2

27 Apr 2011

5340-15-074-4004
Retaining Strap

150744004
10UNI2138: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-149-8194
Mounting Plate

151498194
130147: RNCC: 3 | RNVC: 2
0052531: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-153-0608
Angle Bracket

151530608
0-102196: RNCC: 3 | RNVC: 2
1PA39630-102196: RNCC: 5 | RNVC: 2

15 Nov 2000

5340-15-009-7067
Door Handle

150097067
1236-09-118: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-117-8830
Angle Bracket

151178830
SF260-00-196-11: RNCC: 3 | RNVC: 2
SF260-00-196-11: RNCC: 5 | RNVC: 9

28 Jan 1994

5340-15-114-4903
Retaining Strap

151144903
CF419632: RNCC: 3 | RNVC: 2

16 Jun 1992

5340-15-007-1906
Retaining Strap

150071906
1386334: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-009-6742
Angle Bracket

150096742
167007P1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-045-2853
Loop Clamp

150452853
N0R2-505-05-25B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-177-4241
Bridge Clamp

151774241
048720: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-107-1288
Spring Holder

151071288
RS413089A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-122-2062
Mounting Bracket

151222062
8A0059325: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-109-3058
Loop Clamp

151093058
1369609: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-109-7409
Angle Bracket

151097409
60132592: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-119-0069
Bow Handle

151190069
70032834: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-150-7007
Metal Grille

151507007
0390301863: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-108-7992
Support Hook

151087992
1395005: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-059-4358
Angle Bracket

150594358
109-0020-37-1: RNCC: 3 | RNVC: 2

30 Jan 1976

5340-15-110-7155
Retaining Strap

151107155
68683-101A00: RNCC: 3 | RNVC: 2
68683-101: RNCC: 5 | RNVC: 2

17 Jul 1990

5340-15-122-2441
Loop Clamp

151222441
80A045128: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-073-5214
Rim Lock Set

150735214
1766BISPART33: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-207-8646
Mounting Bracket

152078646
5801342851: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-156-4068
Loop Clamp

151564068
142068208: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-154-0208
Loop Clamp

151540208
73208A071001: RNCC: 5 | RNVC: 2
73208A071001: RNCC: 5 | RNVC: 9

15 Mar 2001

5340-15-176-6678
Handle Grip

151766678
717345060: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-151-4749
Vent Plug

151514749
0-168060: RNCC: 3 | RNVC: 2
(241)A39630-168060: RNCC: 5 | RNVC: 2
1PA39630-168060: RNCC: 5 | RNVC: 2

29 May 2000

5340-15-199-5246
Butt Hinge

151995246
9708-78241: RNCC: 3 | RNVC: 2

14 Apr 2005

5340-15-007-1904
Retaining Strap

150071904
1384387: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-155-5298
Retaining Clip

151555298
(241)A12122800.003: RNCC: 3 | RNVC: 2
2800.003: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-15-186-9106
Mounting Bracket

151869106
612156: RNCC: 3 | RNVC: 2
612156: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-059-5598
Angle Bracket

150595598
9021-8: RNCC: 3 | RNVC: 2

1 Apr 1976

5340-15-178-5494
Mounting Plate

151785494
2231.042.0001: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-187-4626
Flush Lock

151874626
339-9189: RNCC: 3 | RNVC: 2
(241)AA136339-9189: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-15-135-4281
Angle Bracket

151354281
8563334: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-163-8096
Angle Bracket

151638096
93803350: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-159-3534
Metal Grille

151593534
PN UAS 00043324: RNCC: 3 | RNVC: 2
9999F76036462: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-193-6841
Door Handle

151936841
2051: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-15-156-5142
Rod End Connector

151565142
21200062: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-15-119-5669
Retaining Strap

151195669
4881299: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-045-4576
Loop Clamp

150454576
593-12-10: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-9364
Retaining Strap

150079364
4438018: RNCC: 3 | RNVC: 2
4438018: RNCC: 5 | RNVC: 9

1 Mar 1980

5340-15-195-8846
Mechanical Stop

151958846
157602: RNCC: 3 | RNVC: 2
(241)AJ611157602: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-193-3201
Bow Handle

151933201
MPG 1407-5651-400: RNCC: 3 | RNVC: 2
(241)A5657MPG1407-5651-400: RNCC: 5 | RNVC: 2

30 Apr 2010

5340-15-057-7488
Expansion Plug

150577488
2308-23556: RNCC: 3 | RNVC: 2
230823556: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-120-4447
Mending Plate

151204447
142520362: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-116-4770
Butt Hinge Leaf

151164770
60166437: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-061-3742
Angle Bracket

150613742
P36DC56: RNCC: 5 | RNVC: 2
P36DC56: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-005-4556
Rod End Clevis

150054556
1137-08-106: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-063-5115
Retaining Strap

150635115
60116404: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-003-7667
Mending Plate

150037667
190525190: RNCC: 3 | RNVC: 2
(241)A0199190525190: RNCC: 5 | RNVC: 2

22 Nov 2013

5340-15-162-2794
Access Cover

151622794
291A03310-101: RNCC: 3 | RNVC: 2

4 Jun 2001

5340-15-118-3875
Webbing Strap

151183875
60168410: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-074-4000
Retaining Strap

150744000
5UNI2138: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-062-7260
Angle Bracket

150627260
1141-31-105: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-15-107-2466
Mending Plate

151072466
3070-266: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-113-9683
Padlock Eye

151139683
216A1123-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-063-3255
Retaining Strap

150633255
60113232: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-063-3665
Angle Bracket

150633665
42042241: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-074-3997
Retaining Strap

150743997
14UNI2137: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-001-8155
Mounting Plate

150018155
41003129: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-177-4150
Mechanical Stop

151774150
046403: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-158-7177
Access Cover

151587177
504077368: RNCC: 3 | RNVC: 2

29 Mar 2004

5340-15-121-7200
Screw Thread Insert

151217200
1320040004: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-187-3096
Retaining Band

151873096
UZ156: RNCC: 3 | RNVC: 2
(241)A9410UZ156: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-001-8154
Mounting Plate

150018154
98195525: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-153-2513
Handle Grip

151532513
122518103: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-049-5290
Handle Grip

150495290
011-1902: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-008-0699
Angle Bracket

150080699
60113190: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-006-9892
Flush Catch

150069892
AW002HC063A123A: RNCC: 3 | RNVC: 2

3 Jan 2014

5340-15-118-7099
Access Cover

151187099
73129384: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-3939
Mending Plate

151533939
5137-337-04: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-057-5779
Retaining Strap

150575779
72-014-610: RNCC: 3 | RNVC: 2
72-014-610: RNCC: 5 | RNVC: 9

26 Nov 1972

5340-15-121-3173
Threaded Rod End

151213173
324C01200-001: RNCC: 3 | RNVC: 2

22 Aug 2001

5340-15-139-3700
Handle Grip

151393700
42021970: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-189-2823
Access Cover

151892823
D8408874: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-004-7627
Retaining Strap

150047627
68147-101: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-200-6554
Retaining Bail

152006554
519463-02: RNCC: 3 | RNVC: 2

19 Feb 2006

5340-15-045-4272
Rod End Clevis

150454272
N0R5-220-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-061-5325
Friction Catch Stud

150615325
000200255800: RNCC: 5 | RNVC: 2
000200255800: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-117-4741
Loop Clamp

151174741
MC416.34D: RNCC: 3 | RNVC: 2

30 May 1994

5340-15-007-2576
Rod End Clevis

150072576
1384921: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-008-4128
Mending Plate

150084128
1236-80-103: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-107-2876
Mending Plate

151072876
64148: RNCC: 3 | RNVC: 2

20 Apr 1994

5340-15-120-2712
Clamping Catch

151202712
60165577: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-177-3397
Angle Bracket

151773397
8009454: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-118-7509
Rod End Connector

151187509
9434031: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-3643
Angle Bracket

151183643
60142606: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-109-1809
Retaining Strap

151091809
1394791: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-158-5224
Retaining Band

151585224
451A1015-003: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-113-1718
Rod End Clevis

151131718
331A2073-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-230-3508
Handle Grip

152303508
1325-05-167: RNCC: 3 | RNVC: 2
534015E124515: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-119-0867
Loop Clamp

151190867
70929344: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-062-9053
Angle Bracket

150629053
0-55545: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-006-4064
Angle Bracket

150064064
1379968: RNCC: 3 | RNVC: 2
1379968: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-122-3559
Track Stop

151223559
D1408728: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-15-149-1160
Bow Handle

151491160
60185969: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-117-1976
Retaining Strap

151171976
190521162: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-066-5518
Angle Bracket

150665518
776771P: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-120-4831
Access Cover

151204831
142519101: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-15-117-6383
Support Hook

151176383
142502181: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-120-8733
Access Cover

151208733
109-0312-33-105: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-051-1132
Retaining Strap

150511132
72-067-411: RNCC: 3 | RNVC: 2
72-067-411: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-141-7579
Retaining Ring

151417579
38UNI3654: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-111-8627
Filler Opening Cap

151118627
41770016A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-121-9884
Angle Bracket

151219884
60159870: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-108-5224
Angle Bracket

151085224
60110268: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-120-4454
Mending Plate

151204454
142503297: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-064-2040
Screw Thread Insert

150642040
590-962-307: RNCC: 3 | RNVC: 2
590.962.307: RNCC: 5 | RNVC: 2
590.962.307: RNCC: 5 | RNVC: 2

6 Dec 1983

5340-15-061-4212
Angle Bracket

150614212
P-135342-001: RNCC: 3 | RNVC: 2
P135342-001: RNCC: 5 | RNVC: 2

20 Jan 1978

5340-15-056-9888
Loop Clamp

150569888
7171-01-005: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-116-0809
Retaining Strap

151160809
1Q 576509: RNCC: 3 | RNVC: 2
1Q 576509: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-151-2683
Bow Handle

151512683
04760606: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-103-7660
Plain Solid Disk

151037660
2PM8161-12: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-155-0479
Angle Bracket

151550479
J92440233-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-195-5962
Handwheel

151955962
VC.192/60P-M10X40: RNCC: 3 | RNVC: 2
(241)A0774VC.192/60P-M10X40: RNCC: 5 | RNVC: 2

8 Apr 2011

5340-15-110-8316
Mortise Latch Set

151108316
MSP211: RNCC: 3 | RNVC: 2

14 Jun 1990

5340-15-050-2911
Handle Grip

150502911
8751-9: RNCC: 3 | RNVC: 2
8751-9: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-177-4758
Mounting Bracket

151774758
20ED237: RNCC: 3 | RNVC: 2
(241)A166720ED237: RNCC: 5 | RNVC: 2

24 Mar 2004

5340-15-006-1082
Loop Clamp

150061082
48: RNCC: 3 | RNVC: 2

18 Sep 1979

5340-15-181-0757
Expansion Shield

151810757
FIS 00261: RNCC: 3 | RNVC: 2

17 Oct 2008

5340-15-153-5169
Access Cover

151535169
142010830: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-198-0959
Block Clamp

151980959
AIT13901GG3854: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-15-179-2045
Mounting Plate

151792045
VTB003102EWK-GP01: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-009-4849
Spring Tension Clip

150094849
2-93297-101-77562: RNCC: 3 | RNVC: 2

21 Nov 1980

5340-15-149-3348
Mending Plate

151493348
98482382: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-102-1525
Door Handle

151021525
ME95: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-005-1906
Butt Hinge Leaf

150051906
1377565: RNCC: 3 | RNVC: 2
1377565: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-118-0905
Valve Seat

151180905
D0487684: RNCC: 3 | RNVC: 2

20 Dec 1994

5340-15-127-4304
Handle Grip

151274304
1740-60-006: RNCC: 3 | RNVC: 2
1740-60-006: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-060-2667
Mending Plate

150602667
22081-101: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-15-009-8863
Plain Solid Disk

150098863
1236-61-102: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-055-1355
Handle Grip

150551355
9157-045B: RNCC: 3 | RNVC: 2

6 Apr 1972

5340-15-118-3374
Angle Bracket

151183374
60142115: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-4429
Angle Bracket

151184429
60155543: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-052-4753
Retaining Ring

150524753
43DIN6798: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-005-5104
Retaining Strap

150055104
4392376: RNCC: 3 | RNVC: 2
4392376: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-109-8700
Angle Bracket

151098700
60113489: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-064-5896
Angle Bracket

150645896
1393129: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-109-5053
Spring Tension Clip

151095053
60113937: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-169-5487
Coat And Hat Hook

151695487
F72014000: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-178-6066
Mounting Bracket

151786066
SF260-05-405-15PR: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-045-3558
Loop Clamp

150453558
740-13-05: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-179-8945
Spring Holder

151798945
D1402401: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-063-2833
Retaining Strap

150632833
60110292: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-066-0756
Plain Solid Disk

150660756
W 015683: RNCC: 3 | RNVC: 2

1 Jul 1989

5340-15-179-1766
T Bracket

151791766
RS 417 907 A: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-121-8959
Mending Plate

151218959
142503305: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-007-2611
Retaining Strap

150072611
1387617: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-120-3549
Angle Bracket

151203549
60174820: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-008-0224
Plug Button

150080224
999-5001-10-141: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-164-1275
Handle Grip

151641275
93811254: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-107-0748
Retaining Clip

151070748
0453325: RNCC: 3 | RNVC: 2
G15-03: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-061-5966
Angle Bracket

150615966
P-125381-001: RNCC: 3 | RNVC: 2
P125381-001: RNCC: 5 | RNVC: 2

2 Mar 1978

5340-15-194-5237
Handwheel

151945237
18HJ04543212S01-003/N: RNCC: 3 | RNVC: 2
(241)A001918HJ04543212S01-003/N: RNCC: 5 | RNVC: 2

30 Nov 2010

5340-15-117-6369
Mending Plate

151176369
142507329: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-003-9198
Access Cover

150039198
182754267: RNCC: 3 | RNVC: 2
(241)A0199182754267: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-109-1825
Mending Plate

151091825
60109253: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-169-3712
Coat And Hat Hook

151693712
F72011155: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-118-6537
Plug Button

151186537
70921467: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-071-7397
Handle Grip

150717397
65C: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-063-3201
Angle Bracket

150633201
60104902: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-060-0914
Door Handle

150600914
66923-101A1: RNCC: 3 | RNVC: 2

28 Dec 1976

5340-15-188-2863
Retaining Bail

151882863
858-72: RNCC: 3 | RNVC: 2

1 Sep 2009

5340-15-102-1625
Retaining Strap

151021625
8269-20-04: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-001-1917
Mounting Plate

150011917
921-1981/01: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-15-002-6297
Access Cover

150026297
182704036: RNCC: 3 | RNVC: 2

11 Sep 2013

5340-15-119-7152
Angle Bracket

151197152
60173510: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-205-3160
T Bracket

152053160
3G1323: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-15-152-8894
Stand Base

151528894
190519165: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-073-8924
Flush Lock

150738924
13B65X110-3LEVE: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-3851
Mending Plate

151183851
60159863: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-074-3308
Retaining Strap

150743308
A18UNAV1046A37UN1743: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-065-7748
Butt Hinge

150657748
W 004620: RNCC: 3 | RNVC: 2

1 Jul 1989

5340-15-152-2205
Mending Plate

151522205
42531941: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-15-116-4779
Mending Plate

151164779
60163429: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-020-2862
Rod End Clevis

150202862
02-093J03-17: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-102-7230
Screw Thread Insert

151027230
1576-06-648: RNCC: 3 | RNVC: 2
157606648: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-207-8708
Mounting Plate

152078708
504374843: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-100-5464
Loop Clamp

151005464
8848: RNCC: 3 | RNVC: 2

28 Aug 1983

5340-15-116-2308
Screw Thread Insert

151162308
M4(X0,7)X1,5D: RNCC: 3 | RNVC: 2
210602533: RNCC: 5 | RNVC: 2

19 May 1999

5340-15-178-6967
Webbing Strap

151786967
01155-2-01213-2500: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-187-2180
Butt Hinge

151872180
179202126: RNCC: 3 | RNVC: 2
(241)A0199179202126: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-104-4367
Expansion Plug

151044367
14282470: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-177-6259
Angle Bracket

151776259
169894P1: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-156-9460
Loop Clamp

151569460
EN4113F14NH: RNCC: 2 | RNVC: 2

18 Mar 2003

5340-15-118-8006
Mounting Bracket

151188006
4802696: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-062-2736
Mending Plate

150622736
1141-31-193: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-009-3738
Screw Thread Insert

150093738
1-1-0385: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-007-1890
Retaining Strap

150071890
1387377: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-157-6421
Block Clamp

151576421
AIT13901EG3537: RNCC: 3 | RNVC: 2

12 Oct 2003

5340-15-117-4187
Rod End Clevis

151174187
142502239: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-117-4345
Access Cover

151174345
585603100301: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-118-4449
Rod End Clevis

151184449
60156093: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-199-4653
Block Clamp

151994653
A465A5001A: RNCC: 3 | RNVC: 2
(241)A0126A464A5001A: RNCC: 5 | RNVC: 2

12 Apr 2005

5340-15-108-5229
Loop Clamp

151085229
4806103: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-108-9142
Loop Clamp

151089142
026202492700: RNCC: 5 | RNVC: 2
026202492700: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-121-6364
Loop Clamp

151216364
800039375: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-120-4843
Access Cover

151204843
142519923: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-15-116-3431
Rod End Clevis

151163431
230822480: RNCC: 3 | RNVC: 2

26 Apr 1993

5340-15-054-0784
Loop Clamp

150540784
260-13-168-01: RNCC: 3 | RNVC: 2
260-13-168-01: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-188-6199
Access Cover

151886199
504022580: RNCC: 3 | RNVC: 2
Z04.01.05.13: RNCC: 5 | RNVC: 2
5340PL0956043: RNCC: 6 | RNVC: 9

15 Oct 2009

5340-15-179-5219
Plain Solid Disk

151795219
305693P1: RNCC: 3 | RNVC: 2

2 Mar 2007

5340-15-162-2371
Access Cover

151622371
131867: RNCC: 3 | RNVC: 2
A5140316: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-118-4555
Retaining Strap

151184555
60150143: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-162-1817
Access Cover

151621817
17104: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-15-061-4053
Access Door Hinge

150614053
27524-101: RNCC: 3 | RNVC: 2

13 Oct 1977

5340-15-148-5180
Recess Handle

151485180
98416177: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-170-4871
Hook Handle

151704871
14828-401: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-160-3056
Coat And Hat Hook

151603056
F720098351: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-117-6390
Access Cover

151176390
142507015: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-117-6444
Angle Bracket

151176444
22202202: RNCC: 3 | RNVC: 2

5 Jan 1994

5340-15-064-4302
Angle Bracket

150644302
P-842651-002: RNCC: 3 | RNVC: 2
P842651-002: RNCC: 5 | RNVC: 2

10 Jul 1984

5340-15-152-7352
Recess Handle

151527352
27100: RNCC: 3 | RNVC: 2
(241)A333427100: RNCC: 4 | RNVC: 1
3710T0: RNCC: 5 | RNVC: 2

19 Oct 2000

5340-15-138-4140
Angle Bracket

151384140
5428476: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-100-8281
Retaining Strap

151008281
21610090A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-179-8943
Access Cover

151798943
D1402433: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-068-3662
Retaining Clip

150683662
OD143Z051: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-149-3131
Loop Clamp

151493131
4886036: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-121-9652
Loop Clamp

151219652
181S020080: RNCC: 3 | RNVC: 2

2 Apr 1996

5340-15-177-3841
Bridge Clamp

151773841
033944: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-002-5066
Loop Clamp

150025066
5455: RNCC: 3 | RNVC: 2

2 Sep 2013

5340-15-144-1414
Retaining Band

151441414
1-00071-01: RNCC: 3 | RNVC: 2
NR71: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-062-7917
Retaining Strap

150627917
0-34167: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-122-2711
Mounting Bracket

151222711
800047420: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-207-8719
Mounting Bracket

152078719
504375158: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-066-0737
Retaining Strap

150660737
5989510: RNCC: 3 | RNVC: 2
5989510: RNCC: 5 | RNVC: 9

8 May 1985

5340-15-118-3628
Angle Bracket

151183628
60140253: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-045-3556
Loop Clamp

150453556
740-12-46: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-177-4264
Bridge Clamp

151774264
049286: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-063-3300
Loop Clamp

150633300
1/04415/90: RNCC: 3 | RNVC: 2
10441590: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-068-0867
Hand Crank

150680867
C-9533-2: RNCC: 3 | RNVC: 2
C-9533-2: RNCC: 3 | RNVC: 2

10 Oct 1981

5340-15-002-5978
Mounting Bracket

150025978
504381606: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-005-0516
Retaining Strap

150050516
0-08787: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-202-8141
Spring Holder

152028141
S3511323: RNCC: 3 | RNVC: 2
(241)A0178S3511323: RNCC: 5 | RNVC: 2

17 Jul 2007

5340-15-122-2749
Mounting Bracket

151222749
800051674: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-001-4495
Mounting Bracket

150014495
P01060: RNCC: 3 | RNVC: 2

5 Jul 2013

5340-15-189-2648
Plain Solid Disk

151892648
05.0000.13: RNCC: 3 | RNVC: 2
05.0000.13: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-187-1933
Retaining Band

151871933
MFG18: RNCC: 3 | RNVC: 2
(241)A3980MFG18: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-060-9476
Mending Plate

150609476
F400C1B1-2: RNCC: 3 | RNVC: 2

20 May 1977

5340-15-194-7354
Mounting Bracket

151947354
0.007.6666.3: RNCC: 3 | RNVC: 2

11 Jan 2011

5340-15-187-2065
Mounting Bracket

151872065
SC 100 689: RNCC: 3 | RNVC: 2
(241)A3980SC100689: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-109-1826
Mending Plate

151091826
60103993: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-103-0711
Angle Bracket

151030711
DE013.12.998: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-122-2634
Mounting Plate

151222634
800035363: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-139-4456
Angle Bracket

151394456
4722115: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-158-4405
T Bracket

151584405
87107-101: RNCC: 3 | RNVC: 2

15 Feb 2004

5340-15-118-4498
Angle Bracket

151184498
60152076: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-117-6372
Mending Plate

151176372
142507321: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-153-2702
Vent Plug

151532702
SM2377-1: RNCC: 2 | RNVC: 3
122621070: RNCC: 5 | RNVC: 3

12 Dec 2000

5340-15-178-7799
Mounting Bracket

151787799
030134: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-063-2810
Angle Bracket

150632810
60109158: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-119-7266
Pawl Fastener

151197266
60170069: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-187-5572
Mounting Bracket

151875572
TAF-0006/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-198-8875
Loop Clamp

151988875
A071A016HC: RNCC: 3 | RNVC: 2
(241)A0126A071A016HC: RNCC: 5 | RNVC: 2

24 Nov 2004

5340-15-008-6328
Rod End Clevis

150086328
22153: RNCC: 3 | RNVC: 2

16 Nov 1981

5340-15-063-3541
Angle Bracket

150633541
60125023: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-113-8625
Angle Bracket

151138625
1P 573889: RNCC: 3 | RNVC: 2
1P 573889: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-003-4619
Mounting Plate

150034619
182713190: RNCC: 3 | RNVC: 2
(241)A0199182713190: RNCC: 5 | RNVC: 2

14 Nov 2013

5340-15-142-7417
Screw Thread Insert

151427417
2146-06-303: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-142-9315
Vent Plug

151429315
478629: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-177-4165
Mechanical Stop

151774165
046762: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-153-2627
Rod End Clevis

151532627
122611189: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-057-6574
Retaining Band

150576574
204-6350-94-15: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-063-0128
Butt Hinge Leaf

150630128
SF260-11-148-01: RNCC: 3 | RNVC: 2
SF260-11-148-01: RNCC: 5 | RNVC: 9

4 Oct 1982

5340-15-007-5140
Screw Thread Insert

150075140
1139-01-184: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-142-4317
Access Cover

151424317
4400007: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-005-0201
Rod End Clevis

150050201
109-0041-20-3: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-201-3134
Protection Bellows

152013134
4-74283.0001//D: RNCC: 3 | RNVC: 2
(241)A00694-74283.0001//D: RNCC: 5 | RNVC: 2

23 Jul 2006

5340-15-115-5331
Tubular Fairlead

151155331
5VF2-32: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-057-4394
Retaining Band

150574394
204-9000-12-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-152-0214
Retaining Strap

151520214
0-173220: RNCC: 3 | RNVC: 2
00173220: RNCC: 3 | RNVC: 2
(241)A39630-173220: RNCC: 5 | RNVC: 2

2 Aug 2000

5340-15-154-9624
Hook Handle

151549624
RAK-4046/01: RNCC: 5 | RNVC: 2
RAK-4046/01: RNCC: 5 | RNVC: 9

28 Nov 2001

5340-15-121-9902
Clamping Catch

151219902
60176766: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-001-7289
Retaining Band

150017289
131-22510: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-003-2126
Angle Bracket

150032126
752891: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-063-0807
Retaining Band

150630807
4731088: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-108-0772
Access Cover

151080772
32-03-298: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-102-5974
Retaining Strap

151025974
204658: RNCC: 3 | RNVC: 2

4 Mar 1993

5340-15-051-5081
Retaining Strap

150515081
TA103C: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-008-1164
Bow Handle

150081164
1009.052.01: RNCC: 3 | RNVC: 2

28 Jan 1981

5340-15-109-3794
Mending Plate

151093794
5137-290-17: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-109-3776
Angle Bracket

151093776
5137-263-35: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-109-0849
Angle Bracket

151090849
60125881: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-001-7864
Mounting Plate

150017864
5949786196: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-151-5936
Bow Handle

151515936
A1001507: RNCC: 3 | RNVC: 2

14 Jun 2000

5340-15-201-6634
Handle Grip

152016634
N523G5300201: RNCC: 3 | RNVC: 2
(241)A0126N523G5300201: RNCC: 5 | RNVC: 2

9 Nov 2006

5340-15-179-0680
Mechanical Stop

151790680
E250-504F: RNCC: 3 | RNVC: 2
E250-504F: RNCC: 5 | RNVC: 9

20 Apr 2006

5340-15-109-0160
Retaining Band

151090160
60101065: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-133-4657
Handle Grip

151334657
8546225: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-045-3906
Loop Clamp

150453906
N0R2-505-06-24B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-117-1837
Screw Thread Insert

151171837
01300040006/92793/31: RNCC: 3 | RNVC: 2

27 Apr 1994

5340-15-100-7628
Access Door Hinge

151007628
109-0640-49-32: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-116-4827
Angle Bracket

151164827
93813956: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-121-5404
Access Cover

151215404
132506974: RNCC: 3 | RNVC: 2

15 Jan 1996

5340-15-119-9890
Mending Plate

151199890
73266F01: RNCC: 3 | RNVC: 2
73266F01: RNCC: 3 | RNVC: 2
73266F01: RNCC: 5 | RNVC: 9

29 May 1996

5340-15-155-6559
Protection Bellows

151556559
0550126: RNCC: 3 | RNVC: 2
(241)A97720550126: RNCC: 8 | RNVC: 2

14 May 2002

5340-15-175-5910
Handle Grip

151755910
EX3439RI4218068: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-064-7653
Mending Plate

150647653
23.74.63.00: RNCC: 3 | RNVC: 2

26 Dec 1983

5340-15-147-5946
Mounting Bracket

151475946
738360-10: RNCC: 3 | RNVC: 2
738360-10: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-059-9573
Angle Bracket

150599573
109-0101-24-1: RNCC: 3 | RNVC: 2

10 Nov 1976

5340-15-113-1443
Strap Hinge

151131443
277A1425-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-067-9261
Rod End Clevis

150679261
04215-101: RNCC: 3 | RNVC: 2

18 Feb 1986

5340-15-170-5451
Handle Grip

151705451
1625/7-IMP: RNCC: 2 | RNVC: 2
CC012: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-15-089-5809
Butt Hinge

150895809
16950-125: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-089-5815
Butt Hinge

150895815
16946-075: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-109-3241
Angle Bracket

151093241
DE075-203-1072-1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-179-5466
Corner Brace

151795466
76039719: RNCC: 3 | RNVC: 2

2 Mar 2007

5340-15-116-4825
Angle Bracket

151164825
60169570: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-149-8106
Mounting Plate

151498106
129117: RNCC: 3 | RNVC: 2
0052431: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-008-0831
Mending Plate

150080831
60113960: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-180-1914
Control Rod

151801914
980000.03: RNCC: 3 | RNVC: 2
CV146099: RNCC: 5 | RNVC: 2
980000.03: RNCC: 5 | RNVC: 2
980000.03: RNCC: 5 | RNVC: 2

15 Feb 2008

5340-15-202-4602
Angle Bracket

152024602
N925G9188201: RNCC: 3 | RNVC: 2
(241)A0126N925G9188201: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-15-119-1390
Mending Plate

151191390
73125188: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-155-4532
Retaining Band

151554532
C0040G007: RNCC: 3 | RNVC: 2
1PA0226C0040G007: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-179-8990
Block Clamp

151798990
D1410101: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-110-5833
Spring Tension Clip

151105833
10125576: RNCC: 3 | RNVC: 2

18 Apr 1990

5340-15-175-0809
Cushioning Pad

151750809
185078663A02: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-152-1050
Protection Bellows

151521050
60139297: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-057-4385
Retaining Band

150574385
204-9000-20-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-5517
Access Cover

150015517
182719594: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-118-4499
Angle Bracket

151184499
60151793: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-108-5135
Bow Handle

151085135
60124162: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-113-2794
Retaining Strap

151132794
08218-102B00: RNCC: 3 | RNVC: 2

30 May 1991

5340-15-118-0083
Access Cover

151180083
1P 561665: RNCC: 3 | RNVC: 2
1P 561665: RNCC: 5 | RNVC: 9

28 Jan 1995

5340-15-063-6466
Retaining Strap

150636466
4710757: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-063-3769
Angle Bracket

150633769
60121799: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-007-1894
Retaining Strap

150071894
1390501: RNCC: 3 | RNVC: 2

4 Jun 1989

5340-15-117-0478
Threaded Rod End

151170478
552610903: RNCC: 3 | RNVC: 2
RAR3566: RNCC: 5 | RNVC: 2
552610903: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-15-112-3479
Retaining Strap

151123479
60154101: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-007-1922
Loop Clamp

150071922
1377532: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-110-2213
Retaining Strap

151102213
06596-101C00: RNCC: 3 | RNVC: 2

27 Jun 1990

5340-15-153-5170
Access Cover

151535170
142010838: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-124-7332
Angle Bracket

151247332
4725147: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-007-2207
Angle Bracket

150072207
1397278: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-064-2249
Retaining Strap

150642249
60116057: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-157-6650
Angle Bracket

151576650
11031613: RNCC: 3 | RNVC: 2
(241)A977211031613: RNCC: 5 | RNVC: 2

15 Oct 2003

5340-15-113-8590
Cushioning Pad

151138590
1Z 592464: RNCC: 3 | RNVC: 2
1Z 592464: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-100-6834
Rod End Clevis

151006834
W000782: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-4838
Retaining Strap

151094838
500317: RNCC: 2 | RNVC: 2
1P 500317: RNCC: 3 | RNVC: 2
1P 500317: RNCC: 5 | RNVC: 9
500317: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-120-1977
Butt Hinge Leaf

151201977
212A7103-001: RNCC: 3 | RNVC: 2

31 Jan 1995

5340-15-118-3389
Angle Bracket

151183389
60146320: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-065-4718
Leather Strap

150654718
001101781007: RNCC: 5 | RNVC: 2
001101781007: RNCC: 5 | RNVC: 9

27 Feb 1985

5340-15-064-0603
Angle Bracket

150640603
60113193: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-195-2192
Metal Grille

151952192
219828230: RNCC: 3 | RNVC: 2
219828230: RNCC: 5 | RNVC: 2
CV173691: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-199-3164
Mortise Lock Set

151993164
000601052: RNCC: 3 | RNVC: 2
(241)A3343000601052: RNCC: 5 | RNVC: 2

2 Mar 2005

5340-15-150-7874
Mounting Bracket

151507874
00012358: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-15-157-1799
Loop Clamp

151571799
A079A018NB: RNCC: 3 | RNVC: 2

15 May 2003

5340-15-119-0892
Retaining Band

151190892
70930871: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-161-0317
Coat And Hat Hook

151610317
F710137861: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-108-9570
Retaining Strap

151089570
91663049: RNCC: 3 | RNVC: 2

25 May 1989

5340-15-066-1174
Hand Crank

150661174
01TC20811: RNCC: 3 | RNVC: 2

10 Feb 1986

5340-15-007-9588
Angle Bracket

150079588
4446141: RNCC: 3 | RNVC: 2
4446141: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-009-1392
Angle Bracket

150091392
60106561: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-109-0187
Angle Bracket

151090187
60105583: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-220-2889
Door Closer

152202889
86015: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-169-2644
Coat And Hat Hook

151692644
F72010058: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-179-7440
Lock-Release Lever

151797440
0.008.2765.4: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-118-2018
Loop Clamp

151182018
17315490: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-108-3112
Angle Bracket

151083112
60129818: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-020-1054
Leather Strap

150201054
02-231E08: RNCC: 2 | RNVC: 2

10 Apr 1972

5340-15-206-3539
Mounting Plate

152063539
50040 2738: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-156-1342
Loop Clamp

151561342
377-023-002: RNCC: 3 | RNVC: 2

3 Dec 2002

5340-15-008-1358
Rod End Clevis

150081358
A1-10302-001: RNCC: 3 | RNVC: 2
A1-10302-001: RNCC: 5 | RNVC: 9

22 Apr 1981

5340-15-127-7227
Handle Grip

151277227
5425-76: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-194-1969
Access Cover

151941969
9903905157: RNCC: 3 | RNVC: 2

1 Oct 2010

5340-15-199-8524
Bow Handle

151998524
41581130: RNCC: 3 | RNVC: 2
(241)A917241581130: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-102-1677
Mending Plate

151021677
8243.02.02: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-003-1376
Cover Retainer

150031376
5949791049: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-110-5898
Mending Plate

151105898
60157877: RNCC: 3 | RNVC: 2

18 Apr 1990

5340-15-148-4014
Angle Bracket

151484014
142052843: RNCC: 3 | RNVC: 2

10 Aug 1998

5340-15-149-9252
Bow Handle

151499252
00028971: RNCC: 3 | RNVC: 2

25 Jun 1999

5340-15-118-3336
Retaining Strap

151183336
60142362: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-108-9892
Screw Thread Insert

151089892
60110960: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-154-1007
Angle Bracket

151541007
0-161963: RNCC: 3 | RNVC: 2
1PA39630-161963: RNCC: 5 | RNVC: 2
(241)A39630-161963: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-187-9514
Access Cover

151879514
20.01.83.10: RNCC: 3 | RNVC: 2

3 Jun 2009

5340-15-177-3752
Mounting Plate

151773752
026943: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-153-3915
Mending Plate

151533915
5137-321-05: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-207-8404
Utility Access Door

152078404
092356: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-109-1806
Retaining Strap

151091806
1372481: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-203-7318
Mounting Plate

152037318
00874R0480: RNCC: 3 | RNVC: 2
00874R0480: RNCC: 5 | RNVC: 2
CV173895: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-195-1899
Cushioning Pad

151951899
PWHS04830-08.FM: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-063-5304
Retaining Strap

150635304
1385939: RNCC: 3 | RNVC: 2
1385939: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-109-4645
Angle Bracket

151094645
1R 532151: RNCC: 3 | RNVC: 2
1R 532151: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-194-7857
Mending Plate

151947857
58290: RNCC: 3 | RNVC: 2
(241)A348858290: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-064-7127
Handle Grip

150647127
01-245-E-220: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-180-9875
Lock Key

151809875
091505214: RNCC: 3 | RNVC: 2
(241)A1782091505214: RNCC: 5 | RNVC: 2

12 Sep 2008

5340-15-112-3811
Plug Button

151123811
P406: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-089-7368
Mending Plate

150897368
2553: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-117-6392
Access Cover

151176392
142507930: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-074-3951
Retaining Strap

150743951
4UNI2134CD: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-120-4467
Mending Plate

151204467
132511911: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-109-3715
Mending Plate

151093715
5137-292-13: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-181-1736
Loop Clamp

151811736
178940103: RNCC: 3 | RNVC: 2
(241)A0199178940103: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-074-3952
Retaining Strap

150743952
5UNI2134CD: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-005-4614
Screw Thread Insert

150054614
1137-16-219: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-065-2692
Retaining Strap

150652692
W 008548A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-005-5917
Butt Hinge Leaf

150055917
05002: RNCC: 3 | RNVC: 2

21 Mar 1979

5340-15-110-7870
Mending Plate

151107870
60109275: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-007-1884
Retaining Strap

150071884
1377329: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-109-4723
Mending Plate

151094723
1P 579697: RNCC: 3 | RNVC: 2
1P 579697: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-198-8720
Access Cover

151988720
0111268: RNCC: 3 | RNVC: 2
F46/02AISI304: RNCC: 5 | RNVC: 2

23 Nov 2004

5340-15-113-5693
Rod End Clevis

151135693
66015-101B00: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-008-7017
Angle Bracket

150087017
1141-31-133: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-009-9760
Spring Holder

150099760
1236-09-180: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-118-9910
Access Cover

151189910
75207995: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-231-6607
Angle Bracket

152316607
981983369: RNCC: 3 | RNVC: 2
251015E151170: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-160-3461
Coat And Hat Hook

151603461
F720045351: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-179-7696
Mounting Plate

151797696
GW34842: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-127-9199
Angle Bracket

151279199
4042637: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-006-1416
Retaining Strap

150061416
69549-101A1: RNCC: 3 | RNVC: 2

1 Oct 1979

5340-15-203-7227
Access Cover

152037227
00231R0260: RNCC: 3 | RNVC: 2
00231R0260: RNCC: 5 | RNVC: 2
CV173759: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-152-8004
Access Cover

151528004
P300106: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-149-3110
Retaining Strap

151493110
4885869: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-118-7010
Angle Bracket

151187010
73128778: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-108-9872
Angle Bracket

151089872
1387448: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-107-8803
Angle Bracket

151078803
60129817: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-133-8178
Handle Grip

151338178
578159: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-059-2719
Butt Hinge Leaf

150592719
260-18-12-14: RNCC: 3 | RNVC: 2
260-18-12-14: RNCC: 5 | RNVC: 9

18 Nov 1975

5340-15-142-2065
Door Handle

151422065
L12/D10: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-168-9632
Coat And Hat Hook

151689632
F72003365: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-007-2567
Angle Bracket

150072567
1384643: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-003-9195
Blank Panel

150039195
182742107: RNCC: 3 | RNVC: 2
(241)A0199182742107: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-178-9250
Mounting Plate

151789250
TN122MD005AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-207-8603
Mounting Plate

152078603
5801321812: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-152-7938
Mounting Plate

151527938
P140809: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-144-9997
Mounting Plate

151449997
E5236.0000: RNCC: 5 | RNVC: 2
E5236.0000: RNCC: 5 | RNVC: 9

26 Feb 1997

5340-15-150-0114
Access Cover

151500114
142097159: RNCC: 3 | RNVC: 2

12 Jul 1999

5340-15-180-1915
Vent Plug

151801915
KMV-14: RNCC: 3 | RNVC: 2
ND8987: RNCC: 5 | RNVC: 2

15 Feb 2008

5340-15-147-5982
Mounting Plate

151475982
834781-10: RNCC: 3 | RNVC: 2
834781-10: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-059-2871
Catch Strike

150592871
260-11-129-11: RNCC: 3 | RNVC: 2
260-11-129-11: RNCC: 5 | RNVC: 9

18 Nov 1975

5340-15-194-9294
Padlock

151949294
PC766A: RNCC: 3 | RNVC: 2
(241)AF075PC766A: RNCC: 5 | RNVC: 2

7 Feb 2011

5340-15-160-3297
Coat And Hat Hook

151603297
F720030541: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-135-4944
Angle Bracket

151354944
LTCT5518: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-169-2480
Coat And Hat Hook

151692480
F72009835: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-152-8787
Access Cover

151528787
142032338: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-119-1510
Access Cover

151191510
73126209: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-109-1841
Angle Bracket

151091841
1371261: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-198-4115
Access Cover

151984115
122505191: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-114-2936
Vent Plug

151142936
TSF5G: RNCC: 3 | RNVC: 2

3 Feb 1994

5340-15-204-2295
Loop Clamp

152042295
006A5456-005: RNCC: 3 | RNVC: 2
(241)A2142006A5456-005: RNCC: 5 | RNVC: 2

5 Oct 2011

5340-15-007-2533
Bow Handle

150072533
1379095: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-006-4092
Angle Bracket

150064092
440560: RNCC: 3 | RNVC: 2
440560: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-199-9269
Angle Bracket

151999269
A387A1190A: RNCC: 3 | RNVC: 2
(241)A0126A387A1190A: RNCC: 5 | RNVC: 2

27 Jul 2005

5340-15-061-2214
Butt Hinge Leaf

150612214
260-02-10-12: RNCC: 3 | RNVC: 2
260-02-10-12: RNCC: 5 | RNVC: 9

30 May 1977

5340-15-157-9234
Angle Bracket

151579234
0-164571: RNCC: 3 | RNVC: 2
1PA39630-164571: RNCC: 5 | RNVC: 2
(241)A39630-164571: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-188-2635
Mounting Plate

151882635
322027F01: RNCC: 3 | RNVC: 2

31 Aug 2009

5340-15-116-4913
Retaining Strap

151164913
60149344: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-108-7975
Retaining Strap

151087975
1378551: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-005-2762
Retaining Strap

150052762
0-28423: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-205-2313
Mounting Bracket

152052313
GL218A: RNCC: 3 | RNVC: 2
(241)AA045GL218A: RNCC: 5 | RNVC: 2

28 Feb 2012

5340-15-180-0338
Loop Clamp

151800338
75208324: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-158-0486
Stand Base

151580486
T0005482: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-15-102-0784
Butt Hinge

151020784
213A7162-401: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-002-9776
Mounting Bracket

150029776
504147847: RNCC: 3 | RNVC: 2
(241)A4249504147847: RNCC: 5 | RNVC: 2

22 Oct 2013

5340-15-117-4815
Loop Clamp

151174815
3161T0068A: RNCC: 3 | RNVC: 2
21610068A: RNCC: 3 | RNVC: 2
(241)A361821610068A: RNCC: 4 | RNVC: 1

27 Oct 1993

5340-15-118-7029
Access Cover

151187029
73128874: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-008-4131
Mending Plate

150084131
1236-31-932: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-009-4839
Spring Tension Clip

150094839
2-79113-123-75428: RNCC: 3 | RNVC: 2

21 Nov 1980

5340-15-201-2566
Angle Bracket

152012566
1188.153-01: RNCC: 3 | RNVC: 2
(241)A30931188.153-01: RNCC: 5 | RNVC: 2

11 Jul 2006

5340-15-119-0531
Expansion Plug

151190531
70920370: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-153-6109
Access Cover

151536109
142050314: RNCC: 3 | RNVC: 2

16 Feb 2001

5340-15-152-7311
Retaining Band

151527311
.00.1917: RNCC: 3 | RNVC: 2
(241)A3334.00.1917: RNCC: 4 | RNVC: 1
10T1917: RNCC: 5 | RNVC: 2

19 Oct 2000

5340-15-112-9346
Loop Clamp

151129346
11610014B: RNCC: 3 | RNVC: 2

20 Apr 1996

5340-15-153-2481
Access Cover

151532481
122505624: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-180-0603
Mounting Bracket

151800603
106.3902.312.0: RNCC: 3 | RNVC: 2

16 Jan 2008

5340-15-001-5976
Mounting Bracket

150015976
5801588342: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-118-3408
Loop Clamp

151183408
60141537: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-196-8460
Tee Hinge

151968460
PN UAS 00039834: RNCC: 3 | RNVC: 2
5340F76033929: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-007-8929
Retaining Strap

150078929
60105421: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-216-0499
Handle Grip

152160499
050561: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-179-9566
Mounting Plate

151799566
0000500401248: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-148-4387
Filler Opening Cap

151484387
3000000015: RNCC: 3 | RNVC: 2

11 Aug 1998

5340-15-054-0782
Angle Bracket

150540782
260-11-77-14: RNCC: 3 | RNVC: 2
260-11-77-14: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-151-6087
Mending Plate

151516087
42030154: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-15-116-1857
Leather Strap

151161857
190509243: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-15-150-9751
Handle Grip

151509751
75313011: RNCC: 3 | RNVC: 2
9919249: RNCC: 5 | RNVC: 2
75313011: RNCC: 5 | RNVC: 9

17 Feb 2000

5340-15-221-7462
Handle Grip

152217462
1005150504699: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-121-9654
Loop Clamp

151219654
181S020160: RNCC: 3 | RNVC: 2

2 Apr 1996

5340-15-116-8630
Loop Clamp

151168630
D1402133: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-148-1982
Mounting Plate

151481982
3855.113: RNCC: 3 | RNVC: 2
3855.113: RNCC: 5 | RNVC: 2

1 Jul 1998

5340-15-112-3425
Angle Bracket

151123425
60149131: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-119-9057
Screw Thread Insert

151199057
122509137: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-121-6637
Loop Clamp

151216637
800056783: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-120-6605
Tubular Fairlead

151206605
D0468514: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-001-8038
Pipe Hanger

150018038
5949787571: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-118-2011
Loop Clamp

151182011
17317390: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-178-9380
Mounting Bracket

151789380
NR003MD011AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

Load More Results