What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 71 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 71 of 72

5340-15-001-3437
Dumper

150013437
1131227P01-00: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-005-5306
Double Angle Bracket

150055306
1026-02-148: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-122-6949
Cerniera

151226949
SH3688-401: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-116-6210
Dust And Moisture Seal Protective Plug

151166210
DPR 23424/1-9-22: RNCC: 3 | RNVC: 2

20 Nov 1993

5340-15-194-3557
Manual Control Lever

151943557
109-0512-21-109: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-062-5202
Nut And Bolt Locking Plate

150625202
83061-117: RNCC: 3 | RNVC: 2

21 Jul 1982

5340-15-180-4284
Rw Bracket Assembly

151804284
212-1135-44-101: RNCC: 3 | RNVC: 2
(241)A0126212-1135-44-101: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-144-7219
Fascetta

151447219
30-005-15: RNCC: 3 | RNVC: 2
45C30-15: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-020-2460
Dust And Moisture Seal Protective Plug

150202460
01-097-02-16: RNCC: 3 | RNVC: 2
55.51.001.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-110-2241
Mensolaacerniera

151102241
68200-001A01: RNCC: 3 | RNVC: 2
68200-001A1: RNCC: 5 | RNVC: 2

11 Jul 1990

5340-15-187-2175
Scontro Anteriore S

151872175
174801157: RNCC: 3 | RNVC: 2
(241)A0199174801157: RNCC: 5 | RNVC: 2
14100004654: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-001-8535
Inje.Pump

150018535
ED00656R0600-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-154-6014
Base (1) Per Sosteg

151546014
157606796: RNCC: 2 | RNVC: 3

26 Jul 2001

5340-15-152-0657
Resilient Mount

151520657
CFDI/VZA/D/AV/500: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-102-2800
Serie Gruppo Staffa

151022800
644629-002: RNCC: 3 | RNVC: 2
644629-002: RNCC: 5 | RNVC: 9

18 Feb 1988

5340-15-113-2466
Staffacomplessivo

151132466
312A6448-003: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-065-4342
Access Cover Plate

150654342
1376-18-732: RNCC: 3 | RNVC: 2
137618732: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-111-3452
Guida Speciale

151113452
109-0021-15-3: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-221-6970
Molle A Trazione

152216970
5340RI0991776: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-148-5804
Assieme Semicernier

151485804
129-0340-40-102: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-155-0906
Nut And Bo Retainer

151550906
J57150340-005: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-15-127-2108
Molla

151272108
1741-67-003: RNCC: 3 | RNVC: 2
1741-67-003: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-105-6153
Buckle

151056153
2/20328-09.03.74-07: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-195-3540
Kit Assemblaggio Ba

151953540
BE111/ASS: RNCC: 3 | RNVC: 2
(241)AD626BE111/ASS: RNCC: 5 | RNVC: 2

16 Mar 2011

5340-15-117-7276
Control Rod

151177276
142502396: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-105-6149
Buckle

151056149
2/25010-23.11.71-06: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-107-9850
Bush

151079850
322-0010/13: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-057-1981
Asta A Forcella Spe

150571981
7-5623-200-42765: RNCC: 3 | RNVC: 2

4 Oct 1972

5340-15-105-3411
Handwheel

151053411
1500/IC/III-08.09.58-47: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-151-7342
Silentblock

151517342
0-161582: RNCC: 3 | RNVC: 2
00161582: RNCC: 3 | RNVC: 2
(241)A39630-161582: RNCC: 5 | RNVC: 2

4 Jul 2000

5340-15-050-4442
Staffa

150504442
7-4421-101-45179-1: RNCC: 3 | RNVC: 2
7-4421-1-01-45179-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-157-9872
Latch

151579872
J94344034-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-001-8938
Pattino Di Metallo

150018938
8873/64/5015-24-21: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-147-5159
Colonnino

151475159
44080-001: RNCC: 5 | RNVC: 2
44080-001: RNCC: 5 | RNVC: 9
44080-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-179-5225
Helical Compression Spring Seat

151795225
3014-013: RNCC: 3 | RNVC: 2

2 Mar 2007

5340-15-179-4827
Iso Connector Yello

151794827
873-4012-911: RNCC: 3 | RNVC: 2
M0017107: RNCC: 5 | RNVC: 2

22 Jan 2007

5340-15-147-6730
Cerniera

151476730
311A2954-751: RNCC: 3 | RNVC: 2

26 Feb 1998

5340-15-166-5120
Serbatoio Per Monta

151665120
3051052010008: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-219-4223
Tasselli Universali

152194223
420-3584: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-188-2898
Dust And Moisture Seal Protective Plug

151882898
SPLT.25002: RNCC: 3 | RNVC: 2
336621183034: RNCC: 5 | RNVC: 2
A2/STD/3338C ITEM 7: RNCC: 5 | RNVC: 2
SPLT.25002: RNCC: 5 | RNVC: 2

1 Sep 2009

5340-15-125-0974
Dust And Moisture Seal Protective Cap-Plug

151250974
205-8110-09-1: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-174-7318
Elev. Bearing Hing

151747318
825-4012-330: RNCC: 3 | RNVC: 2
M0016964: RNCC: 5 | RNVC: 2

2 Oct 2003

5340-15-151-9156
Atu Tray

151519156
D9897.0000: RNCC: 5 | RNVC: 2
3-E4014.0000//E: RNCC: 5 | RNVC: 2
D9897.0000: RNCC: 5 | RNVC: 2
3-E4014.0000//E: RNCC: 5 | RNVC: 2
3-E4014.0000//E: RNCC: 5 | RNVC: 9
D9897.0000: RNCC: 5 | RNVC: 9

25 Jul 2000

5340-15-045-1487
Control Rod

150451487
500-12-17: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-111-5784
Threaded

151115784
26T042P073: RNCC: 3 | RNVC: 2
26T042P073: RNCC: 3 | RNVC: 2
26T042P073: RNCC: 5 | RNVC: 2
26T042P073: RNCC: 5 | RNVC: 9

7 Sep 1989

5340-15-209-2989
Maniglione Antipani

152092989
59123: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-220-5032
Lucchetto Acciaio I

152205032
LUCCHETTO-ACCIAIO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-157-9213
Tirante Speciale

151579213
0-161741: RNCC: 3 | RNVC: 2
(241)A39630-161741: RNCC: 5 | RNVC: 2
1PA39630-161741: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-222-2298
Porta Tipo Hedemora

152222298
S1-13E2: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-101-0020
Tee Hinge

151010020
32-02-135: RNCC: 3 | RNVC: 2

21 Apr 1987

5340-15-007-3770
Piastrina Speciale

150073770
0-34089: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-100-1066
Chiavistello

151001066
P892737-406: RNCC: 3 | RNVC: 2

10 Sep 1986

5340-15-115-3380
Duct Panel

151153380
710-5066-034: RNCC: 3 | RNVC: 2
82-01776: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-122-1333
Ring Bottom

151221333
A-39111-001: RNCC: 3 | RNVC: 2
A39111-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-053-5951
Profilato In Gomma

150535951
45-3857-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-004-7630
Escutcheon Plate

150047630
27047-101A1: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-025-0964

5340-15-136-8224
Estremita' Forcella

151368224
101.138T: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-194-7868
Cuffia Di Protezion

151947868
60947: RNCC: 3 | RNVC: 2
(241)A348860947: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-194-0070
Half-Hinge Assembly

151940070
109-0641-55-107: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-213-8242
Cilindro Da Infilar

152138242
08210-05-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-237-7534
Ruota Girevole Diam

152377534
534015E115593: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-050-1569
Cappellotto

150501569
5165-10: RNCC: 3 | RNVC: 2
5165-10: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-114-8798
Assiemeammortizzato

151148798
62770-11/008: RNCC: 3 | RNVC: 2
(241)A006962770-11/008: RNCC: 5 | RNVC: 2

1 Sep 1992

5340-15-113-2371
Protezionecavi

151132371
231A1350-003: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-005-9980
Spinotto

150059980
20004-034-00: RNCC: 3 | RNVC: 2

11 Aug 1979

5340-15-162-0296
End Cap

151620296
291A07130-101: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-122-4579
Collare

151224579
CO48: RNCC: 3 | RNVC: 2

26 Jul 1996

5340-15-156-3386
Special Tie Rod

151563386
(241)A3460CBD71242P03: RNCC: 3 | RNVC: 2
CBD71242P03: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-147-5757
Piston

151475757
982150022: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-112-0425
Piastrina Speciale

151120425
275A0702-405: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-153-1613
Staffa

151531613
W029410: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-15-101-7434
Piasra Forata

151017434
P5: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-232-3843
Rondella Di Bloccag

152323843
5387/25 3-12/13: RNCC: 3 | RNVC: 2
534015E150098: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-202-2310
Rod

152022310
233A1003-011: RNCC: 3 | RNVC: 2
(241)A0019233A1003-011: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-15-003-2557
Stand Base

150032557
772-9916: RNCC: 3 | RNVC: 2
(241)AA136772-9916: RNCC: 5 | RNVC: 2

31 Oct 2013

5340-15-222-2674
Dust Cap

152222674
HP-006-5-00000-12-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-232-3882
Handwheel

152323882
5387/65 3-19: RNCC: 3 | RNVC: 2
597515E150137: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-220-0509
Lam.Elcom Sys Lg100

152200509
S1-145B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-219-4315
Serratura Univaersa

152194315
C202-25: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-060-9455
Rim Clen Clamp (1)

150609455
F304C3B10: RNCC: 3 | RNVC: 2
F304C3B-10: RNCC: 5 | RNVC: 2
F304C3B-10: RNCC: 5 | RNVC: 2

22 May 1977

5340-15-154-2096
Double Angle Bracket

151542096
0-169200: RNCC: 3 | RNVC: 2
(241)A39630-169200: RNCC: 5 | RNVC: 2
1PA39630-169200: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-209-4438
Staffa Omega Per Es

152094438
41069: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-154-1320
Striscia

151541320
39A832-12-02-06: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-15-215-3784
Ruota Piena Diam.25

152153784
250/75-14: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-237-4521
Posizionatore Per C

152374521
182170/16: RNCC: 3 | RNVC: 2
534015E054714: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-174-7451
Lamiera 2.50X5 Crni

151747451
51460-01/015: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-150-5890
Access Door

151505890
A37826-01-08: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-045-3468
Threaded End Tensioning Tie Rod

150453468
714-12-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-065-3392
Hinge Assy

150653392
P135182-801: RNCC: 3 | RNVC: 2

25 May 1985

5340-15-045-3332
Control Rod

150453332
590-12-61: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-197-7258
Assieme Chiusura

151977258
129-0641-39-103: RNCC: 3 | RNVC: 2

21 Apr 2004

5340-15-201-0102
Rod

152010102
3152013-00: RNCC: 3 | RNVC: 2

10 May 2006

5340-15-066-4878
Rullo Speciale

150664878
T0085/R16: RNCC: 3 | RNVC: 2

1 Mar 1986

5340-15-220-0471
Pannelli Fendenti 1

152200471
S1-56: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-231-2815
Tappo Assieme

152312815
5600-650-001: RNCC: 3 | RNVC: 2
534015E027391: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-004-3542
Supporto Angolare

150043542
P-110261-002: RNCC: 3 | RNVC: 2
P110261-002: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-15-157-2985
Hinge Assy

151572985
J94346701-401: RNCC: 3 | RNVC: 2

19 Jun 2003

5340-15-198-5837
Lh Support Assy

151985837
21367-001: RNCC: 3 | RNVC: 2

15 Oct 2004

5340-15-065-4885
Cover Plate Access

150654885
1040-08-906: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-220-0534
Trave Collegamento

152200534
S1-137D: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-199-8767
Handwheel

151998767
730-137-602: RNCC: 3 | RNVC: 2
(241)A5122730-137-602: RNCC: 5 | RNVC: 2

21 Jun 2005

5340-15-142-2376
Ammortizzatore

151422376
MM50AISI316: RNCC: 3 | RNVC: 2
(241)A3290MM50AISI316: RNCC: 5 | RNVC: 2

9 Jun 1997

5340-15-109-9004
Sfera

151099004
470553: RNCC: 3 | RNVC: 2
D0470553: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-181-0277
Sostegno Elastico

151810277
3030VD20-60: RNCC: 3 | RNVC: 2

29 Sep 2008

5340-15-114-0870
Rinforzo Verticale

151140870
713170-0001: RNCC: 3 | RNVC: 2

22 Apr 1992

5340-15-040-1966
Gomma Per Riscontro

150401966
2-0343-701-27844: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-005-5214
Dust And Moisture Seal Protective Plug

150055214
20005-113-00: RNCC: 3 | RNVC: 2

22 Feb 1978

5340-15-149-0760
Speciale Guida

151490760
2224-0017-001: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-15-004-8675
Turnbuckle Body

150048675
66295-101: RNCC: 3 | RNVC: 2

28 Aug 1978

5340-15-101-8506
Cornice

151018506
66-9786-12: RNCC: 3 | RNVC: 2

25 Feb 1986

5340-15-220-0480
Turning Vanes Alta

152200480
S1-93: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-153-4188
A Sezione Pie Disco

151534188
5137-263-03: RNCC: 3 | RNVC: 2

17 Jan 2001

5340-15-042-2857
Staffa

150422857
7113-19: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-174-9850
Earthing Clips

151749850
930-5477-02: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-15-200-4477
Manopola Di Fissagg

152004477
5387-GI-13-11/4-2-5-1MAN: RNCC: 3 | RNVC: 2
(241)A53875387-GI-13-11/4-2-5-1M: RNCC: 5 | RNVC: 2

22 Jan 2006

5340-15-127-4404
Molla

151274404
1740-17-016: RNCC: 3 | RNVC: 2
1740-17-016: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-194-0045
Connector Sup Angle

151940045
109-0854-09-1: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-195-6886
Braccio Pieghevole

151956886
1BR7EMOFF-ZA: RNCC: 3 | RNVC: 2
(241)ACA441BR7EMOFF-ZA: RNCC: 5 | RNVC: 2

21 Apr 2011

5340-15-154-1424
Supporto Speciale

151541424
0-114548: RNCC: 3 | RNVC: 2
(241)A39630-114548: RNCC: 5 | RNVC: 2
1PA39630-114548: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-137-1391
Tubo

151371391
47-753-057-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-152-0176
Double Angle Bracket

151520176
0-163684: RNCC: 3 | RNVC: 2
00163684: RNCC: 3 | RNVC: 2
(241)A39630-163684: RNCC: 5 | RNVC: 2

2 Aug 2000

5340-15-156-3874
Protection Rubber

151563874
CBD71354P08: RNCC: 3 | RNVC: 2
(241)A3460CBD71354P08: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-002-7104
Molla

150027104
1410: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-198-4173
Shackle

151984173
122505251: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-209-5676
Inserto Avvitatore

152095676
CROCE: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-060-1814
Terminale Sostegno

150601814
17357-1: RNCC: 3 | RNVC: 2

4 Dec 1976

5340-15-190-3537
Fascetta

151903537
FFS13X280: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-190-1207
Collare Logpak

151901207
1000045A: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-059-0016
Maniglia Complessiv

150590016
59412-030: RNCC: 3 | RNVC: 2

25 Aug 1975

5340-15-154-1976
Supporto Motore Spe

151541976
0-167070: RNCC: 3 | RNVC: 2
00167070: RNCC: 3 | RNVC: 2
(241)A39630-167070: RNCC: 5 | RNVC: 2
(241)A396300167070: RNCC: 5 | RNVC: 2
1PA39630-167070: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-115-2682
Plug

151152682
18UNI1663C7-3145ZNNI: RNCC: 2 | RNVC: 2
230823306: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-100-1067
Chiavistello

151001067
P892737-405: RNCC: 3 | RNVC: 2

10 Sep 1986

5340-15-199-5252
Pistone A Gas Per T

151995252
1872-02095: RNCC: 3 | RNVC: 2

14 Apr 2005

5340-15-062-1872
Arm Hand Crank

150621872
P-892651-401: RNCC: 3 | RNVC: 2
P892651-401: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-195-3296
Multiple Angle Bracket

151953296
109-0886-79-101: RNCC: 3 | RNVC: 2

15 Mar 2011

5340-15-206-5933
Utility Resilient Mount

152065933
Y23-PWHS12560ML: RNCC: 3 | RNVC: 2
(241)A4929Y23-PWHS12560ML: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-102-8979
Accesso Coperchio

151028979
1P280357: RNCC: 3 | RNVC: 2
1P280357: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-197-8642
Rubber Bumper

151978642
N523G5093201: RNCC: 3 | RNVC: 2

21 May 2004

5340-15-111-7659
Spring

151117659
PS701-5066-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-152-3813
Collare

151523813
0-108896: RNCC: 3 | RNVC: 2
00108896: RNCC: 3 | RNVC: 2
(241)A39630-108896: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-107-4875
Anelli Di Serraggio

151074875
6/200/0003: RNCC: 3 | RNVC: 2

17 Jul 1989

5340-15-064-3746
Resilient Mount

150643746
00118207: RNCC: 3 | RNVC: 2
4643918: RNCC: 3 | RNVC: 2
0-118207: RNCC: 4 | RNVC: 1
(241)A39630-118207: RNCC: 5 | RNVC: 2
4643918: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-207-8543
Countershaft

152078543
440-9-139: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-174-7462
Tondo P-Ot58pb50h20

151747462
53240-02/092: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-068-4087
Cerniera Compl.Port

150684087
212-1115-16-1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-067-9256
Escutcheon Plate

150679256
22088-101: RNCC: 3 | RNVC: 2

19 Feb 1986

5340-15-006-9092
Morsetto Serratubi

150069092
M740-20-13B: RNCC: 3 | RNVC: 2

12 Jan 1977

5340-15-114-7586
Later Plate

151147586
01TL20453-01: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-116-7948
Manovella Di Manovr

151167948
DPR24092-21: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-200-2537
Turnbuckle

152002537
1000-350-TD16: RNCC: 3 | RNVC: 2
(241)A61141000-350-TD16: RNCC: 5 | RNVC: 2

13 Nov 2005

5340-15-110-3241
Washer

151103241
141-1262/13: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-102-1613
Turnbuckle Body

151021613
8266-00-17: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-054-4182
Turnbuckle

150544182
2-B12UNI2020X15CN1808-4047: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-144-6814
Tappo Introduzione

151446814
V170-070005A: RNCC: 3 | RNVC: 2
V170070005A: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-170-3732
Angle

151703732
206-062-901-19: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-205-1130
Dust And Moisture Seal Protective Plug

152051130
D-STD37136-E101 ITEM 16: RNCC: 3 | RNVC: 2
D-STD37136-E101ITEM 16: RNCC: 5 | RNVC: 2

21 Feb 2012

5340-15-136-9406
Profilato

151369406
47-360-176-21: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-196-9919
Padlock

151969919
PN UAS 00033095: RNCC: 3 | RNVC: 2
5340F76029743: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-202-7773
Compasso Ferma-Port

152027773
A.7914-A1: RNCC: 3 | RNVC: 2
(241)A7904A.7914-A1: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-15-125-7613
Piastra

151257613
S6165-63106-3: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-100-8108
Semicerniera

151008108
109-0640-52-129: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-100-5545
Estremita Intername

151005545
501-12-06-01A: RNCC: 3 | RNVC: 2

11 Mar 1987

5340-15-157-9592
Paracolpo Posterior

151579592
509110590: RNCC: 3 | RNVC: 2
(241)A0094509110590: RNCC: 5 | RNVC: 2

3 Dec 2003

5340-15-220-0513
Lam. Elcom Sys Lg45

152200513
S1-145L: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-120-6653
Handwheel

151206653
VH153/74+I-NERO: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-154-1020
Corrosion Preventive Anode

151541020
NAV-MM-001-A1-100X500: RNCC: 2 | RNVC: 2

21 Mar 2001

5340-15-006-0969
Piastrina Di Blocca

150060969
P-180061-001: RNCC: 3 | RNVC: 2
P180061-001: RNCC: 5 | RNVC: 2
P180061-001: RNCC: 5 | RNVC: 2
P-180061-001: RNCC: 5 | RNVC: 2

12 Sep 1979

5340-15-158-5235
Assieme Piastra Di

151585235
277A6393-403: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-068-4088
Cerniera Compl.Port

150684088
212-1115-16-2: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-119-3651
Supporto Sinistro C

151193651
68239-801B01: RNCC: 3 | RNVC: 2
68239-801B1: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-15-193-1246
Eye

151931246
00579R0010: RNCC: 3 | RNVC: 2
579-01: RNCC: 3 | RNVC: 2
579-01: RNCC: 5 | RNVC: 9

19 Apr 2010

5340-15-122-1956
Helical Compression Spring Seat

151221956
8063-29: RNCC: 3 | RNVC: 2
8063-29: RNCC: 5 | RNVC: 9

25 Jun 1996

5340-15-134-3830
Calzatura

151343830
66015-101A1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-163-4771
Soffietto Di Protez

151634771
846302: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-170-3514
Clevis

151703514
206-010-347-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-061-4702
Supporto Angolare S

150614702
P135238-002: RNCC: 3 | RNVC: 2

26 Jan 1978

5340-15-065-7566
Bottone

150657566
109-0506-08-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-116-3832
Guida Di Scorriment

151163832
212-7600-11-5: RNCC: 3 | RNVC: 2

23 Nov 1994

5340-15-212-1882
Staffe A Muro

152121882
STAF-MURO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-045-3984
Control Rod

150453984
N0R5-311-03-2-60: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-116-7932
Piastrina Di Blocca

151167932
DPR24150/2-132: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-116-1153
Piastrina Di Blocca

151161153
DPR29494/1-77: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-006-5683
Dispositivo A Chius

150065683
66854-001: RNCC: 3 | RNVC: 2

7 Jan 1980

5340-15-137-2148
Bussola

151372148
35Z1-16-7-62: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-062-4629
Maniglia Speciale

150624629
A00019-01-06: RNCC: 3 | RNVC: 2
A00019-01-06: RNCC: 5 | RNVC: 2

31 Mar 1982

5340-15-174-9849
Earthing Clips

151749849
930-5477-01: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-15-045-3819
Fascetta

150453819
792-11-15: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-137-1175
Cerniera

151371175
47-382-127-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-192-4646
Frame Angle

151924646
212-1130-67-105: RNCC: 3 | RNVC: 2
(241)A0126212-1130-67-105: RNCC: 5 | RNVC: 2

18 Mar 2010

5340-15-220-0535
Trave Collegamento

152200535
S1-137E: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-113-5539
Semicerniera

151135539
129-0640-32-133: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-062-2033
Stopplate

150622033
P-892903-001: RNCC: 3 | RNVC: 2
P892903-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-112-0306
Anello Di Rinforzo

151120306
26-6-20-05B: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-15-115-1331
Dispositivodifissag

151151331
103-0376/01: RNCC: 3 | RNVC: 2

24 Nov 1992

5340-15-181-7505
Fascetta Metallica

151817505
A103118: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-154-0941
Staffa

151540941
0-150608: RNCC: 3 | RNVC: 2
1PA39630-150608: RNCC: 5 | RNVC: 2
(241)A39630-150608: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-009-2900
Cinghietto Fissaggi

150092900
7-8873-200-49200: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-15-068-5786
Seat Helical Compre

150685786
73395F01: RNCC: 3 | RNVC: 2
73395F01: RNCC: 5 | RNVC: 2

10 Apr 1986

5340-15-198-7165
Dashpot

151987165
2 0058-702: RNCC: 3 | RNVC: 2
(241)S346520058-702: RNCC: 5 | RNVC: 2

9 Nov 2004

5340-15-101-9361
Staffa Speciale

151019361
01-261-14-135: RNCC: 3 | RNVC: 2

30 Apr 1987

5340-15-063-6632
Helical Compression Spring Retainer

150636632
P-883615-001: RNCC: 3 | RNVC: 2
P883615-001: RNCC: 5 | RNVC: 2

31 Mar 1983

5340-15-126-4680
Fermaglio

151264680
XS1698: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-149-8721
Head

151498721
3594-49: RNCC: 3 | RNVC: 2
3594-49: RNCC: 5 | RNVC: 9

16 Jun 1999

5340-15-005-0226
Dust And Moisture Seal Protective Cap

150050226
580054: RNCC: 3 | RNVC: 2
796.063.813: RNCC: 5 | RNVC: 2
796-063-813: RNCC: 5 | RNVC: 2

2 Feb 1996

5340-15-220-4709
Catena Genovese

152204709
BOB-20: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-220-2832
Sonda Passa Fili Da

152202832
SONDA-PASS-FILO-MT10: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-149-1051
Attacco D'occhio

151491051
2302-0061-001: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-15-021-8054

5340-15-117-8467
Half Hinge

151178467
9CA8613A170-001: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-15-009-7404
Tube Steel

150097404
1236-09-106: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-222-2296
Porta Roller Shutte

152222296
S1-13B8: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-6568
Clavette

151186568
73061191: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-122-5516
Front Tube

151225516
01TL21257: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-104-8877
Fissaggio Gaffetta

151048877
10441790: RNCC: 3 | RNVC: 2
10441790: RNCC: 5 | RNVC: 2

30 May 1989

5340-15-115-8700
Saddle

151158700
273664P2: RNCC: 3 | RNVC: 2
71-02-023-020: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-113-4676
Bussolaspeciale

151134676
129-0110-83-127: RNCC: 3 | RNVC: 2

17 Jun 1991

5340-15-149-0801
Supporto Sensore S3

151490801
20645-29-015: RNCC: 3 | RNVC: 2
20645-29-015: RNCC: 5 | RNVC: 9

23 Nov 1998

5340-15-191-6139
Clevis Shift Handle

151916139
747237-01: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-009-3171
Electronic Equipment Hardware Kit

150093171
12-04678: RNCC: 3 | RNVC: 2

28 May 1980

5340-15-150-3902
Dust And Moisture Seal Protective Cap

151503902
A9737/17: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-15-155-2421
Handwheel

151552421
D0571393: RNCC: 3 | RNVC: 2
VH153/74+I-NERO: RNCC: 3 | RNVC: 2

9 Feb 2002

5340-15-113-4787
Threaded End Tensioning Tie Rod

151134787
275A0313-003: RNCC: 3 | RNVC: 2

21 Mar 1991

5340-15-127-4000
Anello

151274000
1740-65-012: RNCC: 3 | RNVC: 2
1740-65-012: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-151-4213
Piastrina

151514213
0-121847: RNCC: 3 | RNVC: 2
(241)A39630-121847: RNCC: 5 | RNVC: 2
1PA39630-121847: RNCC: 5 | RNVC: 2

24 May 2000

5340-15-177-5168
Holder

151775168
340-5742/01: RNCC: 3 | RNVC: 2

17 Apr 2004

5340-15-002-2831
Main Arm

150022831
21310108: RNCC: 3 | RNVC: 2
131-0004 ITEM 3: RNCC: 5 | RNVC: 2

5 Aug 2013

5340-15-149-7704
Serie Anelli Per Am

151497704
RG-MM200-4: RNCC: 3 | RNVC: 2
(241)A3290RG-MM200-4: RNCC: 5 | RNVC: 2

21 Jun 1999

5340-15-154-1156
Piastra

151541156
0-171818: RNCC: 3 | RNVC: 2
00171818: RNCC: 3 | RNVC: 2
(241)A39630-171818: RNCC: 5 | RNVC: 2
1PA39630-171818: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-154-0330
Piastra Di Supporto

151540330
0-103888: RNCC: 3 | RNVC: 2
(241)A39630-103888: RNCC: 5 | RNVC: 2
1PA39630-103888: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-109-9571
Piastrina Di Colleg

151099571
11735-101A00: RNCC: 3 | RNVC: 2
11735-101: RNCC: 5 | RNVC: 2

14 Mar 1990

5340-15-210-6692
Linguetta A Disco

152106692
UNI6606-4X7.5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-122-4643
Lever

151224643
010-2050-02: RNCC: 3 | RNVC: 2

30 Jul 1996

5340-15-049-7520
Fascetta

150497520
AB47-706-217-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-074-4165
Turnbuckle

150744165
1A10UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-166-4991
Hinge Half Lh

151664991
212A7106001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-139-3712
Staffa

151393712
42030220: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-215-3628
Cavallotti Plastica

152153628
CAVALLOTTI10MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-154-0401
Supporto Speciale

151540401
0-153992: RNCC: 3 | RNVC: 2
(241)A39630-153992: RNCC: 5 | RNVC: 2
1PA39630-153992: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-220-0487
Augmentor Sezione D

152200487
S1-23: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-041-8465
Staffa Fissaggio Tu

150418465
7-4421-1-01-35493: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-116-2585
Staffa Di Attacco P

151162585
SF260-14-20-03: RNCC: 3 | RNVC: 2
SF260-14-20-03: RNCC: 5 | RNVC: 9

31 Mar 1993

5340-15-113-5121
Padlock

151135121
SH.5043-003: RNCC: 3 | RNVC: 2

27 Aug 1991

5340-15-115-8611
Slide Teles

151158611
295063P1: RNCC: 3 | RNVC: 2
71-70-130-003: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-153-4767
Handwheel

151534767
142010018: RNCC: 2 | RNVC: 3

1 Feb 2001

5340-15-114-7580
Handwheel

151147580
B4-140X12UNI6962-71: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-180-4271
Optic Reinforcement

151804271
205-1600-14-103: RNCC: 3 | RNVC: 2
(241)A0126205-1600-14-103: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-210-6690
Linguetta A Disco

152106690
UNI6606-3X6.5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-000-3556
Screen Door Hardware Set

150003556
939-MEC-15: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-15-170-8568
Lastra P.M.M.A. Sp.

151708568
58261-01/004: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-116-7154
Sede Chiavistello

151167154
109-0361-30-1: RNCC: 3 | RNVC: 2

23 Jun 1993

5340-15-113-2471
Supportospeciale

151132471
331A2015-003: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-120-8195
Fissacavo Complessi

151208195
036855: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-067-2624
Anodo

150672624
A02-1233-104-2: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-154-0937
Staffa

151540937
0-150504: RNCC: 3 | RNVC: 2
(241)A39630-150504: RNCC: 5 | RNVC: 2
1PA39630-150504: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-174-7494
Lamiera 2.5 Piai Mg

151747494
54420-05/025: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-178-4933
Dust And Moisture Seal Protective Cap

151784933
308190-007: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-157-4781
Dust And Moisture Seal Protective Cap-Plug

151574781
(241)S346520000-476: RNCC: 3 | RNVC: 2
2 0000-476: RNCC: 3 | RNVC: 2

7 Aug 2003

5340-15-100-8071
Fermo Compl

151008071
109-0310-27-13: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-154-1407
Staffa

151541407
0-113951: RNCC: 3 | RNVC: 2
00113951: RNCC: 3 | RNVC: 2
(241)A39630-113951: RNCC: 5 | RNVC: 2
1PA39630-113951: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-206-2789
Utility Resilient Mount

152062789
VZA-R-AV-200/5.8: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-101-3004
Hinge Half

151013004
P-135197-003: RNCC: 3 | RNVC: 2
P135197-003: RNCC: 5 | RNVC: 2

30 Jan 1988

5340-15-103-6947
Handwheel

151036947
VL.155/100 P-M12X30: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-064-7122
Resilient Mount

150647122
01-245-E-187: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-089-9700
Clevis

150899700
5-5719-101-22005-3: RNCC: 3 | RNVC: 2

7 Oct 1981

5340-15-147-7577
Assieme Guida Speci

151477577
2302-T347-001: RNCC: 3 | RNVC: 2

25 Mar 1998

5340-15-170-3605
Track Rh

151703605
206-031-501-94: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-009-1843
Tappo Speciale

150091843
109-0130-85-1: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-004-3962
Dust And Moisture Seal Protective Cap

150043962
70-852-312: RNCC: 3 | RNVC: 2
70-852-312: RNCC: 5 | RNVC: 9

3 Apr 1978

5340-15-149-2490
Dispositivo Antiurt

151492490
TM124105/801: RNCC: 3 | RNVC: 2

26 Jul 1999

5340-15-148-7487
Assieme Supporto

151487487
2104-0012-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-158-6106
Access Door

151586106
122606971: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-058-4028
Threaded End Tensioning Tie Rod

150584028
553802260000: RNCC: 2 | RNVC: 3
538-02-2600: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-122-9331
Fascetta

151229331
30-016A16-5: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-065-0530
Attacco A Cerniera

150650530
13893-101A1: RNCC: 3 | RNVC: 2

6 Oct 1984

5340-15-063-8103
Nut And Bolt Locking Plate

150638103
1/41995/11: RNCC: 3 | RNVC: 2

31 Mar 1982

5340-15-222-2310
Montante Ipe 400 L

152222310
S1-134C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-061-4579
Piastra Di Montaggi

150614579
P36HD17: RNCC: 5 | RNVC: 2
P36HD17: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-149-4348
Trapezio Inferiore

151494348
51360-S10-G00: RNCC: 3 | RNVC: 2

1 Mar 1999

5340-15-102-4753
Rubber Bumper

151024753
01-261-12-125: RNCC: 3 | RNVC: 2

30 Apr 1987

5340-15-154-2044
Staffa

151542044
0-168453: RNCC: 3 | RNVC: 2
(241)A39630-168453: RNCC: 5 | RNVC: 2
1PA39630-168453: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-150-4485
Tappo Speciale

151504485
2302-0248-001: RNCC: 3 | RNVC: 2

11 Nov 1999

5340-15-174-7467
Tondo Bronzo B817du

151747467
53260-01/019: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-174-7491
Quadro 30 Pe Aisi1m

151747491
54230-21/029: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-115-4786
Firewall Plate Assy

151154786
S205-6-272-01: RNCC: 3 | RNVC: 2
S205-6-272-01: RNCC: 5 | RNVC: 9

29 Nov 1992

5340-15-066-4079
Tappo Per Musetto C

150664079
68-903050-403: RNCC: 3 | RNVC: 2

25 Oct 1985

5340-15-204-4896
Clamping Ring

152044896
42563704: RNCC: 3 | RNVC: 2
7118855: RNCC: 5 | RNVC: 2
CV179054A: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-158-6442
Protezione

151586442
162530141: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-15-204-8418
Utility Resilient Mount

152048418
VZA-D-AV-500: RNCC: 3 | RNVC: 2

17 Jan 2012

5340-15-153-1247
Dust And Moisture Seal Protective Cap-Plug

151531247
44200000067/14: RNCC: 3 | RNVC: 2

27 Nov 2000

5340-15-187-6413
Protective Cap

151876413
244-02-033: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-134-5640
Collarino Dx

151345640
8-8106-101-46859: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-154-6528
Base (1) Per Sosteg

151546528
541-31-3470: RNCC: 2 | RNVC: 3
554131347000: RNCC: 2 | RNVC: 3

31 Jul 2001

5340-15-147-8152
Squadretta Destra

151478152
2205-38-04: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-15-220-0423
Blind Fastner

152200423
MBF2123-6-150: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-053-5932
Fascia Batteria

150535932
45-8206-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-113-6058
Cover M Pin

151136058
AC120565-1/3-24: RNCC: 3 | RNVC: 2

20 Jan 1992

5340-15-218-9281
Strap

152189281
767-1934-002: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-151-7874
Dust And Moisture Seal Protective Cap-Plug

151517874
0-151779: RNCC: 3 | RNVC: 2
00151779: RNCC: 3 | RNVC: 2
(241)A39630-151779: RNCC: 5 | RNVC: 2
1PA39630-151779: RNCC: 5 | RNVC: 2
98151779: RNCC: 5 | RNVC: 2

10 Jul 2000

5340-15-009-1474
Helical Compression Spring Seat

150091474
4608597: RNCC: 3 | RNVC: 2
0-48183: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-149-6006
Heli-Coil

151496006
2100-02505: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-050-3306
Tirante Speciale Fr

150503306
1304-3-04MM: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-8292
Angle Bracket

150018292
5949783998: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-063-2851
Double Angle Bracket

150632851
60110414: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-006-7257
Clamp Loop

150067257
70251-001: RNCC: 3 | RNVC: 2

20 Nov 1979

5340-15-020-2518
Molla A Lamina

150202518
01-097-01-63: RNCC: 3 | RNVC: 2
55.49.037.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-170-3403
Plate Lh

151703403
212-060-826-7: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-065-7567
Blocchetto

150657567
109-0700-60-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-118-6102
Element Decoupe

151186102
73132918: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-118-8133
Anchor Strap

151188133
EDS10008: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-113-1734
Insertopertappo

151131734
253A1129-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-129-6508
Turnbuckle

151296508
416-64-41: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-212-3551
Cilindro Per Serrat

152123551
SECY-59E: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-040-3373
Forcella Destremita

150403373
5-5239-101-26983: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-102-4836
S Speciale Supporto

151024836
01-261-14-900: RNCC: 3 | RNVC: 2

29 Jul 1987

5340-15-059-5393
Resilient Mount

150595393
1127-10-111: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-114-3277
Cerniera Sinistra

151143277
CF327117: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-118-6067
Calotte

151186067
73136547: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-103-8644
Control Rod

151038644
7167958: RNCC: 3 | RNVC: 2
(7001)5340151038644: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-205-1155
Pin Cotter Split

152051155
131-0003 ITEM 31: RNCC: 3 | RNVC: 2
50020268: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-15-119-6888
Cerniera 1

151196888
29043-001B01: RNCC: 3 | RNVC: 2
29043-001B1: RNCC: 3 | RNVC: 2

2 Nov 1994

5340-15-115-8982
Manual Control Lever

151158982
F33-497: RNCC: 3 | RNVC: 2
F33-497: RNCC: 5 | RNVC: 2

1 Feb 1993

5340-15-135-8242
Bottone A Scatto

151358242
100-046H32A1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-040-2268
Cabratura

150402268
2-3031-100-22142: RNCC: 3 | RNVC: 2
2-3031-1-00-22142: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-005-5221
Do Coupler Assembly

150055221
FRH570027-50: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-006-9624
Clamp

150069624
4860-1T1: RNCC: 3 | RNVC: 2

11 Jan 1979

5340-15-005-4496
Anchor Strap

150054496
1376-05-368: RNCC: 3 | RNVC: 2
137605368: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-059-7109
Electrical-Me Post

150597109
312-0192-01: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-150-5906
Assieme Cornice Des

151505906
A62376-01-10: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-206-8028
Utility Resilient Mount

152068028
VZA-R-AVU-200/5.8: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-190-8761
Fascetta Superiore

151908761
MBEU71175: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-220-0520
Montante 2 Ipe 220

152200520
S1-140A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-052-4446
Resilient Mount

150524446
AA30-4-27-08096-002: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-153-7283
Base (1) Per Sosteg

151537283
142045131: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-212-0953
Fascette Serracavo

152120953
4/11658: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-214-2310
Strettoia A Vite

152142310
STRETTOIAAVITE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-060-4645
Electrical-Me Post

150604645
1127-20-231: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-204-3534
Accendino A Gas

152043534
25990026: RNCC: 3 | RNVC: 2
(241)ACA6425990026: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-194-6310
Lock-Release Lever

151946310
EL.30 - 27: RNCC: 3 | RNVC: 2
(241)A5685EL.30-27: RNCC: 5 | RNVC: 2

16 Dec 2010

5340-15-151-9879
Tirante

151519879
0-164349: RNCC: 3 | RNVC: 2
00164349: RNCC: 3 | RNVC: 2
(241)A39630-164349: RNCC: 5 | RNVC: 2
(241)A396300164349: RNCC: 5 | RNVC: 2

31 Jul 2000

5340-15-108-9089
Strisciametallica

151089089
92888-101: RNCC: 3 | RNVC: 2

5 Oct 1989

5340-15-206-4782
Fairlead

152064782
IM-030: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-15-127-3667
Gancio

151273667
1413-10-716: RNCC: 3 | RNVC: 2
1413-10-716: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-150-2574
Assieme Prolunga Me

151502574
26-6-21-23D: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-15-102-0786
Anello Spaccato Spe

151020786
NOR1-289-10-1: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-151-2738
Stand Base (1)

151512738
3202342: RNCC: 3 | RNVC: 2
553202342000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-101-7850
Fascetta Speciale

151017850
SC32676.16: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-103-4127
Valve Seat

151034127
276447ART71: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-2009
Puntoni Di Appoggio

151032009
DE160.02.040: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.040: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-214-0994
Tassello Mm. 6

152140994
S6: RNCC: 3 | RNVC: 2
(241)A6028S6: RNCC: 5 | RNVC: 2
(7001)5340152140994: RNCC: 5 | RNVC: 2

16 Nov 2005

5340-15-147-5152
Assieme Cappellotto

151475152
31827-001: RNCC: 5 | RNVC: 2
31827-001: RNCC: 5 | RNVC: 9
31827-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-009-8781
Forcella Estremita

150098781
0-31694: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-134-3395
Collare

151343395
N0R7-182-04S: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-101-1606
Coperchio

151011606
500-4645-16: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-057-2895
Threaded End Tensioning Tie Rod

150572895
1376-05-291: RNCC: 3 | RNVC: 2
137605291: RNCC: 5 | RNVC: 2

6 Jul 2000

5340-15-170-3501
Cover

151703501
206-010-005-3: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-170-3285
Support

151703285
183-02-0-11-0-00: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-118-4875
Assieme Leva Comand

151184875
DISTR5245/3: RNCC: 3 | RNVC: 2
DISTR5245/3: RNCC: 5 | RNVC: 9

7 Feb 1995

5340-15-141-1200
Tassello Con Vite I

151411200
1907: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-156-3694
Combined Oil P Plug

151563694
(241)A3460CBD71342G01: RNCC: 3 | RNVC: 2
CBD71342G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-109-7717
Pannellofrontale

151097717
412/12C: RNCC: 3 | RNVC: 2

19 Mar 1990

5340-15-109-6822
Dust And Moisture Seal Protective Cap

151096822
528045-04: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-132-6836
Sigillo

151326836
713-23: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-151-9832
Staffa

151519832
0-153326: RNCC: 3 | RNVC: 2
00153326: RNCC: 3 | RNVC: 2
(241)A39630-153326: RNCC: 5 | RNVC: 2

31 Jul 2000

5340-15-120-7773
Helical Compression Spring Seat

151207773
149243 FIND NO.19: RNCC: 3 | RNVC: 2
21490261: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-152-3268
Staffa

151523268
0-150400: RNCC: 3 | RNVC: 2
00150400: RNCC: 3 | RNVC: 2
(241)A39630-150400: RNCC: 5 | RNVC: 2
1PA39630-150400: RNCC: 5 | RNVC: 2

31 Aug 2000

5340-15-006-3064
Turnbuckle Body

150063064
P-180030-001: RNCC: 3 | RNVC: 2
P180030-001: RNCC: 5 | RNVC: 2

24 Nov 1979

5340-15-007-3628
Fascetta Speciale

150073628
0-33419: RNCC: 3 | RNVC: 2
00033419: RNCC: 3 | RNVC: 2
(241)A39630-33419: RNCC: 5 | RNVC: 2

10 Apr 1979

5340-15-185-7935
Spazzola Acciaio Mm

151857935
D4012/0: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-154-0400
Tampone Elastico

151540400
0-153939: RNCC: 3 | RNVC: 2
(241)A39630-153939: RNCC: 5 | RNVC: 2
1PA39630-153939: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-210-6689
Linguetta A Disco

152106689
UNI6606-3X5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-051-4372
Snap Hook

150514372
408: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-151-0954
Non Metall Paraurto

151510954
03-633-B-10: RNCC: 3 | RNVC: 2
G1257: RNCC: 3 | RNVC: 2
(7001)5340-15-151-0954: RNCC: 5 | RNVC: 2
03-633-B-10: RNCC: 5 | RNVC: 2

20 Mar 2000

5340-15-206-4771
Hinge

152064771
C9021-00: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-15-170-3598
Clip

151703598
206-031-427-3: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-056-5736
Resilient Mount

150565736
23292: RNCC: 3 | RNVC: 2
1276-02-204: RNCC: 5 | RNVC: 2
127602204: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-107-9846
Bush

151079846
141-1334/15: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-170-8096
Asse Di Sintonia

151708096
340-0727/06: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-151-9471
Staffa

151519471
0-176963: RNCC: 3 | RNVC: 2
00176963: RNCC: 3 | RNVC: 2
(241)A39630-176963: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-119-7465
Hinge Half

151197465
P-082780-001: RNCC: 3 | RNVC: 2
P082780-001: RNCC: 5 | RNVC: 2

17 Nov 1994

5340-15-105-4927
Cinghia Puntalino

151054927
2/20538-20.03.68-04: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-151-5411
Piastra

151515411
0-154029: RNCC: 3 | RNVC: 2
(241)A39630-154029: RNCC: 5 | RNVC: 2
1PA39630-154029: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-101-8040
Nut And Bolt Retainer

151018040
808-17171-9: RNCC: 3 | RNVC: 2

12 Nov 1987

5340-15-220-0490
Angolar.Calandr.R 1

152200490
S1-7C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-174-7460
Tondo P-Ot58pb14h20

151747460
53240-02/065: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-170-3783
Strap Assembly

151703783
206-070-793-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-193-5080
Base Antivibrante

151935080
RAP-1556/01: RNCC: 3 | RNVC: 2

25 May 2010

5340-15-059-7350
Cover Plate Access

150597350
538-04-1180: RNCC: 3 | RNVC: 2

5 Feb 1976

5340-15-157-9870
Half Hinge

151579870
J94344032-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-112-8728
Helical Compression Spring Seat

151128728
758923: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-116-7894
Manual Control Lever

151167894
DPR24136/1-26-61: RNCC: 3 | RNVC: 2

29 Nov 1993

5340-15-052-6001
Distanziatore

150526001
204-7502-56-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-110-3821
Staffette

151103821
F294B2-79: RNCC: 3 | RNVC: 2
F294B2-79: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-215-3474
Maniglia Per Cassa

152153474
ART.701-110: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-199-9282
Coperchio Del Suppo

151999282
04-06-2404-17-F: RNCC: 3 | RNVC: 2
(241)A098404-06-2404-17-F: RNCC: 5 | RNVC: 2

27 Jul 2005

5340-15-064-4591
Double Angle Bracket

150644591
1387406: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-074-4206
Turnbuckle

150744206
2B27UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-220-0473
Supporto Dx Angolar

152200473
S1-91A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-222-2260
Trave Tetto U 200X7

152222260
S1-142A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-067-9314
Turnbuckle Assembly

150679314
2-45415-000-74840: RNCC: 3 | RNVC: 2

3 Mar 1986

5340-15-206-5481
Anello Di Spallamen

152065481
04-10-2108-18-C: RNCC: 3 | RNVC: 2
(241)A098404-10-2108-18-C: RNCC: 5 | RNVC: 2

25 Jun 2012

5340-15-009-5818
Helical Compression Spring Seat

150095818
75465011: RNCC: 3 | RNVC: 2
9982558: RNCC: 5 | RNVC: 2
75465011: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-152-3486
Double Angle Bracket

151523486
0-153329: RNCC: 3 | RNVC: 2
00153329: RNCC: 3 | RNVC: 2
(241)A39630-153329: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-156-3580
Dust Protective Cap

151563580
(241)A3460CBD71074P01: RNCC: 3 | RNVC: 2
CBD71074P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-051-3661
Guarnizione

150513661
4020693: RNCC: 3 | RNVC: 2
4020693: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-003-7494
Tirante Speciale Co

150037494
CC0305210/3-4-21: RNCC: 3 | RNVC: 2
(241)A0147CC0305210/3-4-21: RNCC: 5 | RNVC: 2

20 Nov 2013

5340-15-108-1113
Clamp

151081113
AA126748/1-15: RNCC: 3 | RNVC: 2

22 Sep 1989

5340-15-041-8367
Staffa D

150418367
7-4422-101-43238: RNCC: 3 | RNVC: 2
7-4422-1-02-43238: RNCC: 5 | RNVC: 2

10 Apr 1970

5340-15-113-7937
Cerniera Portello A

151137937
129-0640-21-102: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-052-9099
Mezza Cerniera

150529099
204-4610-22-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-142-8829
Dust And Moisture Seal Protective Cap

151428829
709-0103-09-107: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-064-1616
Dust And Moisture Seal Protective Cap

150641616
109-0406-55-1: RNCC: 3 | RNVC: 2

15 Jan 1984

5340-15-111-6004
Holder

151116004
A05141-01-08: RNCC: 3 | RNVC: 2
A05141-01-08: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-219-8572
Confezione Graffett

152198572
31011430: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-163-0805
Sealing Plug Assembly

151630805
99485700: RNCC: 3 | RNVC: 2

27 May 2002

5340-15-137-4012
Piastrina

151374012
R30655: RNCC: 3 | RNVC: 2
R30655: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-102-9049
Helical Compression Spring Retainer

151029049
1P213158: RNCC: 3 | RNVC: 2
1P213158: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-009-1456
Double Angle Bracket

150091456
4684528: RNCC: 3 | RNVC: 2
82660: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-177-4039
Manual Control Handle

151774039
042573: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-116-3308
Speciale Piastra

151163308
434A1039-001: RNCC: 3 | RNVC: 2

22 Apr 1993

5340-15-180-2869
Turnbuckle

151802869
(241)A53606722-0033: RNCC: 3 | RNVC: 2
6722-0033: RNCC: 3 | RNVC: 2

14 Apr 2008

5340-15-113-2538
Complessivo Staffa

151132538
377A1654-005: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-218-4797
Tassello

152184797
S8V-PLUS: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-063-8185
Collare A Supporto

150638185
26752-02: RNCC: 3 | RNVC: 2

19 Jul 1983

5340-15-040-8374
Attacco Destremita

150408374
7-5949-101-33172: RNCC: 3 | RNVC: 2
7-5949-1-01-33172: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-007-5215
Nonrotating Shaft Eye Bracket

150075215
1139-02-149: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-040-3401
Forcella D Estremit

150403401
5-5271-100-21842-1: RNCC: 3 | RNVC: 2
5-5271-1-00-21842-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-170-8543
78 Sil.Ar Proil.D 4

151708543
58125-13/054: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-116-2582
Staffa Di Attacco P

151162582
SF260-13-97-01: RNCC: 3 | RNVC: 2
SF260-13-97-01: RNCC: 5 | RNVC: 9

31 Mar 1993

5340-15-195-3640
Access Door Locking Ring

151953640
DGB-13KL-020: RNCC: 3 | RNVC: 2
(241)AE591DGB-13KL-020: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-198-4293
Piastrina

151984293
162520258: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-189-0480
Utility Resilient Mount

151890480
FN0187/13/1: RNCC: 3 | RNVC: 2

20 Jan 2010

5340-15-136-5412
Forcella Estremita'

151365412
204-011-179-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-147-0945
Resilient Mount

151470945
27.72.38.35: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-118-0509
Supporto Lato Destr

151180509
D0488611: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-152-3249
Double Angle Bracket

151523249
0-114909: RNCC: 3 | RNVC: 2

31 Aug 2000

5340-15-147-8710
Dique A Oreille

151478710
110643: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-205-9437
Supporto A Sella Tu

152059437
00E68300: RNCC: 3 | RNVC: 2
(241)A010600E68300: RNCC: 5 | RNVC: 2

20 Apr 2012

5340-15-005-3735
Turnbuckle

150053735
4205909: RNCC: 3 | RNVC: 2
4205909: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-041-2854
Tubetto Distanziale

150412854
2-5295-109-24206-3: RNCC: 3 | RNVC: 2
2-5295-1-09-24206-3: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-154-1443
Tirante

151541443
0-115124: RNCC: 3 | RNVC: 2
(241)A39630-115124: RNCC: 5 | RNVC: 2
1PA39630-115124: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-187-2827
Tappo Reggianodo Co

151872827
I-C-1423-09-002RR: RNCC: 3 | RNVC: 2

10 Mar 2009

5340-15-180-0267
Cap

151800267
0.96001.17.0: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-105-5502
Dado E Bullon Fermo

151055502
9905755: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-141-6733
Porta Anodo

151416733
4/11572: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-009-9869
Double Angle Bracket

150099869
7-62581-101-78035: RNCC: 3 | RNVC: 2

4 Jun 1981

5340-15-147-7876
Lever

151477876
518-02-3640: RNCC: 3 | RNVC: 2

10 Apr 1998

5340-15-170-5703
Lock-Device

151705703
805-4901-008: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-206-5777
Corrosion Preventive Anode

152065777
GG2430003M-15: RNCC: 3 | RNVC: 2
(241)A3121GG2430003M-15: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-179-6547
Clamp

151796547
873-4012-218: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-027-3699

5340-15-026-8586

5340-15-137-2870
Serratura

151372870
90-015-051-072: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-199-8474
Anchor Strap

151998474
9CS3703065: RNCC: 3 | RNVC: 2
(241)A91729CS3703065: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-149-6150
Support

151496150
518-38-1560: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-120-8299
Supporto Resolver

151208299
129-0308-67-101: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-15-206-5479
Anello Di Spallamen

152065479
04-09-1366-13-C: RNCC: 3 | RNVC: 2
(241)A098404-09-1366-13-C: RNCC: 5 | RNVC: 2

25 Jun 2012

5340-15-218-1129
Lucchetto Mm.40-50

152181129
LUCCHETTO40-50: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-003-8490
Plate Special

150038490
25093-113: RNCC: 3 | RNVC: 2
25093-113: RNCC: 5 | RNVC: 9

27 Oct 1985

5340-15-126-5195
Molla

151265195
A3-646-57: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-111-5923
Disco A Sezione Pie

151115923
A05609-01-22: RNCC: 3 | RNVC: 2
A05609-01-22: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-155-2409
Hinge Assy

151552409
J52850200-403: RNCC: 3 | RNVC: 2

13 Feb 2002

5340-15-101-2962
Slide Telescopio

151012962
285014P1: RNCC: 3 | RNVC: 2
71-02-006-005: RNCC: 5 | RNVC: 2

30 Jan 1988

5340-15-156-4776
Dust And Moisture Seal Protective Plug

151564776
0-121366: RNCC: 3 | RNVC: 2
(241)A39630-121366: RNCC: 5 | RNVC: 2
1PA39630-121366: RNCC: 5 | RNVC: 2

13 Feb 2003

5340-15-122-3034
Protection

151223034
D128604502: RNCC: 3 | RNVC: 2
D128604502: RNCC: 5 | RNVC: 2
D128604502: RNCC: 5 | RNVC: 2

25 Jun 1996

5340-15-045-3403
Control Rod

150453403
594-17-06: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-136-8061
Fermaglio

151368061
KZ9-45-3-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-050-5991
Staffa D

150505991
7-4422-101-45179-1: RNCC: 3 | RNVC: 2
7-4422-1-01-45179-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-163-0029
Access Door

151630029
RS 422 008 AE: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-15-107-2198
Electrical-Me Post

151072198
41D008P005: RNCC: 3 | RNVC: 2
41D008P005: RNCC: 3 | RNVC: 2
41D008P005: RNCC: 5 | RNVC: 2
41D008P005: RNCC: 5 | RNVC: 9

27 Oct 1988

5340-15-190-1922
Molla

151901922
3W45994: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-236-3160
Serratura Con Aste

152363160
CR2250: RNCC: 3 | RNVC: 2
534015E025342: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-166-5063
Cover

151665063
20521002: RNCC: 3 | RNVC: 2
20521002: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-000-5199
Rod End

150005199
213A7380-001: RNCC: 3 | RNVC: 2

13 Mar 2013

5340-15-177-4267
Manual Control Handle

151774267
049432: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-204-4533
Utility Resilient Mount

152044533
E1N-3455-53: RNCC: 3 | RNVC: 2
(241)AJ807E1N-3455-53: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-152-3622
Piastrina

151523622
0-153411: RNCC: 3 | RNVC: 2
00153411: RNCC: 3 | RNVC: 2
(241)A39630-153411: RNCC: 5 | RNVC: 2
(241)A396300153411: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-194-3541
Plate Assembly

151943541
109-0515-78-1: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-231-6003
Staffa

152316003
0-178395: RNCC: 3 | RNVC: 2
534015E086239: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-151-6943
Mensola

151516943
0-159707: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-006-2564
Guida Speciale

150062564
0-28876: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-166-4780
Tassello Di N Lon D

151664780
S8V: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-121-9019
Supporto Sinistro C

151219019
142503922: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-174-7469
Lamiera 0.5 P-Ot67h

151747469
53440-07/012: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-041-8365
Fascetta

150418365
7-4411-300-43468: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-110-4091
External Handle

151104091
V.2260-901: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-186-4311
Kit Strumenti Da Ca

151864311
ITABBPIE: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-105-6379
Collare Serraggio

151056379
10418801: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-119-5428
Piastrina Metallica

151195428
D0485141: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-067-2631
Fascetta

150672631
SP54-12SKZ: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-186-3586
Tappi A Pressione G

151863586
FIS0523: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-113-3496
Manigliaadanellospe

151133496
3-70875.0000//D: RNCC: 5 | RNVC: 2
3-70875.0000//D: RNCC: 5 | RNVC: 9

30 May 1986

5340-15-207-3923
Angle Bracket

152073923
ED0064292170-S: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-217-8620
Tela Smeriglio In C

152178620
TELA SMERIGLIO: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-120-1710
Corrosion Preventive Anode

151201710
1-2-3066R: RNCC: 3 | RNVC: 2

17 Jan 1995

5340-15-108-4748
Cover

151084748
C7271-W3-B1: RNCC: 3 | RNVC: 2
C7271-W3-B1: RNCC: 5 | RNVC: 2
C7271-W3-B1: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-15-178-5996
Linkage

151785996
541-32-0200: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-114-7162
Control Rod

151147162
03-619-B-38: RNCC: 1 | RNVC: 3
52991: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-15-151-5344
Fascetta

151515344
0-110496: RNCC: 3 | RNVC: 2
(241)A39630-110496: RNCC: 5 | RNVC: 2
1PA39630-110496: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-041-0846
Fascetta

150410846
8-2181-1-01-31358: RNCC: 3 | RNVC: 2

1 Jan 1974

Load More Results