What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 70 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 70 of 72

5340-15-062-0669
Hinge

150620669
P882741-001: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-054-8538
Resilient Mount Plate

150548538
533-50-2870: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-122-1362
Plate Perfo

151221362
A-39577-001: RNCC: 3 | RNVC: 2
A39577-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-116-1088
Rotating Shaft Eye Bracket

151161088
DPR24072/1-32: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-116-7937
Manual Control Lever

151167937
DPR24150/2-27-120-121: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-153-6406
Speciale Cerniera

151536406
142010160: RNCC: 1 | RNVC: 3

20 Feb 2001

5340-15-068-1957
Gruppo Staffaggio

150681957
644642: RNCC: 3 | RNVC: 2
644642: RNCC: 5 | RNVC: 9

27 Feb 1986

5340-15-113-4780
Attaccoidlecompless

151134780
244A1543-401: RNCC: 3 | RNVC: 2

14 May 1991

5340-15-200-4257
Set Di Chiodi

152004257
OMP-TEN-018: RNCC: 3 | RNVC: 2
(241)AE591OMP-TEN-018: RNCC: 5 | RNVC: 2

18 Jan 2006

5340-15-136-9362
Morsetto

151369362
47-674-015-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-150-4376
Snap Hook

151504376
SC-S0104: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-15-065-0057
Attacco A Cerniera

150650057
13897-101: RNCC: 3 | RNVC: 2

17 Aug 1984

5340-15-122-9227
Inserto

151229227
80-004-3-7: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-122-9228
Inserto

151229228
80-005-2-10: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-063-7330
Rubber Bumper

150637330
19.46.16.50: RNCC: 3 | RNVC: 2

30 May 1983

5340-15-117-4239
Complessi Supporto

151174239
142513110: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-112-8575
Forcella

151128575
466953: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-137-3748
Anello

151373748
V19256: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-117-6764
Seat Pipe Support

151176764
96499-003: RNCC: 3 | RNVC: 2
96499-003A00: RNCC: 5 | RNVC: 2

10 Jan 1994

5340-15-065-3624
Clamp

150653624
C01-0018-101: RNCC: 3 | RNVC: 2

10 Jun 1985

5340-15-121-4501
Resilient Mount

151214501
VZA-U-90: RNCC: 3 | RNVC: 2

26 Mar 1996

5340-15-006-9149
Control Rod

150069149
500-12-09-01: RNCC: 3 | RNVC: 2

12 Jan 1977

5340-15-136-9405
Profilato

151369405
47-360-176-22: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-0224
Coperchio

151150224
01-02-680-31B-B: RNCC: 3 | RNVC: 2

16 Jun 1993

5340-15-007-0445
Supporto A Fascetta

150070445
92643-001A1: RNCC: 3 | RNVC: 2

13 Feb 1980

5340-15-008-3689
Escutcheon Plate

150083689
2-54333-101-70693: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-15-206-5929
Utility Resilient Mount

152065929
Y23-PWEN30.0425: RNCC: 3 | RNVC: 2
(241)A4929Y23-PWEN30.0425: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-174-7446
Lamiera 0.40X5cr Ni

151747446
51460-01/004: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-111-4105
Gruppopoastrasettor

151114105
2002-333: RNCC: 3 | RNVC: 2

23 Nov 1990

5340-15-121-9897
Double Angle Bracket

151219897
60177504: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-231-0949
Ruotina

152310949
003719: RNCC: 3 | RNVC: 2
534015E062398: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-002-3690
Sealing Plug Assembly

150023690
369A8321: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-15-148-6595
Access Cover

151486595
190532906: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-151-8701
Tassello Gomma

151518701
60121349: RNCC: 3 | RNVC: 2

14 Jul 2000

5340-15-193-2589
Guida Lineare

151932589
D8410169: RNCC: 3 | RNVC: 2
(241)A0461D8410169: RNCC: 5 | RNVC: 2

23 Apr 2010

5340-15-183-4956
Angolare

151834956
COMM631018020003: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-144-7205
Anello

151447205
NAS51-46: RNCC: 3 | RNVC: 2
NAS670-51: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-222-2280
Ang. Fissaggio 80X8

152222280
S1-110J: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-205-1105
Plug

152051105
D-STD45038-E-301BOM 8IN ITEM 6: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-15-177-4068
Manual Control Handle

151774068
VTC25-P-M6X-16: RNCC: 3 | RNVC: 2
043967: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-065-3203
Rubber Bumper

150653203
P-893049-001: RNCC: 3 | RNVC: 2
P893049-001: RNCC: 5 | RNVC: 2

19 Feb 1985

5340-15-041-8414
Fascetta D

150418414
7-5416-101-45614: RNCC: 3 | RNVC: 2
7-5416-1-01-45614: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-155-5217
Access Door

151555217
(241)A5015DE013.14.416: RNCC: 3 | RNVC: 2
DE013.14.416: RNCC: 3 | RNVC: 2

8 Apr 2002

5340-15-157-3913
Specia Cover Guard

151573913
190509368: RNCC: 2 | RNVC: 3

4 Jul 2003

5340-15-202-4551
Structual Angle

152024551
03053: RNCC: 3 | RNVC: 2
(241)A553603053: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-105-6692
Porta Maniglia

151056692
0-48895: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-8526
Coperchioi

151128526
487155: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-051-4855
Dust And Moisture Seal Protective Cap

150514855
A43617-14: RNCC: 3 | RNVC: 2
A43617-14: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-156-7094
Dust And Moisture Seal Protective Plug

151567094
442000000/134: RNCC: 3 | RNVC: 2

4 Mar 2003

5340-15-213-4562
Lucchetto Ott. Mm20

152134562
PL1802000: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-152-3553
Multiple Angle Bracket

151523553
0-174033: RNCC: 3 | RNVC: 2
00174033: RNCC: 3 | RNVC: 2
(241)A39630-174033: RNCC: 5 | RNVC: 2
1PA39630-174033: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-215-3884
Cilindro Ovale Mm.5

152153884
CILINDRO55,4MM.: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-157-7070
Turnbuckle

151577070
TENDITORE INOX 2 FORCELLE 5MM: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-005-6975
Coperchio Speciale

150056975
0-33832: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-200-7126
Turnbuckle

152007126
98467397: RNCC: 3 | RNVC: 2
(241)A424998467397: RNCC: 5 | RNVC: 2

21 Feb 2006

5340-15-060-2792
Seat Pipe Support

150602792
63105-101: RNCC: 3 | RNVC: 2

15 Feb 1977

5340-15-115-3434
Rub Strap Retaining

151153434
500-3695-038: RNCC: 3 | RNVC: 2
82-01601: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-148-2838
Profilato Speciale

151482838
39X1105-16: RNCC: 3 | RNVC: 2

20 Jul 1998

5340-15-220-0461
Pann.Medio 2400Hx42

152200461
S1-71: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-199-8880
Tastatore Acciaio

151998880
06-10-736-13-F: RNCC: 3 | RNVC: 2
(241)A098406-10-736-13-F: RNCC: 5 | RNVC: 2

26 Jun 2005

5340-15-148-7523
Supporto Verticale

151487523
2203-0009-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-175-2069
Sealing Plug Assembly

151752069
TPFF-3: RNCC: 3 | RNVC: 2
(241)A8867TPFF-3: RNCC: 5 | RNVC: 2

4 Feb 2004

5340-15-122-1140
Braccio Complessivo

151221140
129-0309-10-101: RNCC: 3 | RNVC: 2

7 May 1996

5340-15-114-7323
Ghiera

151147323
D0491105: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-005-2610
Guida Per Asta

150052610
109-0710-48-1: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-113-7928
Semicerniera

151137928
129-0640-77-217: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-206-6845
Positioner

152066845
895-3101-36-109: RNCC: 3 | RNVC: 2

2 Jul 2012

5340-15-062-0682
Hinge

150620682
P882742-003: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-100-1386
Clamp Quick Rel

151001386
30061-11: RNCC: 3 | RNVC: 2

10 Apr 1987

5340-15-220-0526
Piastra Trave Carro

152200526
S1-112E: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-178-3790
Handwheel

151783790
555-9061-89000: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-114-6170
Semicerniera Compl.

151146170
129-0640-49-106: RNCC: 3 | RNVC: 2

23 Jun 1992

5340-15-001-9131
Rod End

150019131
411A2062-001: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-15-054-8546
Resilient Mount Plate

150548546
533-50-3410: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-121-6152
Barillet

151216152
80A012723: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-005-6470
Anello Di Sicurezza

150056470
0-21129: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-103-2014
Snodo Lamierino

151032014
DE160.02.049: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-199-1754
Pipe Bracket Assy

151991754
252A6608-401: RNCC: 3 | RNVC: 2

24 Jan 2005

5340-15-138-6752
Tappo Spurgo

151386752
5636-530-101: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-134-4746
Perno Esterno Istal

151344746
22942-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-110-7892
Regolatoreflussooli

151107892
109-0406-53-1: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-020-2235
Tirante A T

150202235
02-231E04-16: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-202-0325
Supporto Sensore

152020325
74-202777A: RNCC: 3 | RNVC: 2
(241)A331474-202777A: RNCC: 5 | RNVC: 2

24 Jan 2007

5340-15-000-4937
Rod

150004937
13HJ04643228S01-411-001: RNCC: 3 | RNVC: 2
(241)A001913HJ04643228S01-411-00: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-180-8444
Present Indicator

151808444
315P6210-01: RNCC: 3 | RNVC: 2

28 Jul 2008

5340-15-206-5932
Utility Resilient Mount

152065932
Y23-PWHS12560L2: RNCC: 3 | RNVC: 2
(241)A4929Y23-PWHS12560L2: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-120-6766
Piastrina Forata Pe

151206766
D1401539: RNCC: 3 | RNVC: 2

29 Jun 1996

5340-15-188-8041
Speciale Piastrina

151888041
552306114000: RNCC: 3 | RNVC: 2
(241)A1140552306114000: RNCC: 5 | RNVC: 2

19 Nov 2009

5340-15-001-8824
Disco

150018824
60801013: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-152-3546
Multiple Angle Bracket

151523546
0-173952: RNCC: 3 | RNVC: 2
00173952: RNCC: 3 | RNVC: 2
(241)A39630-173952: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-220-0530
Distanz. Travi Tubo

152200530
S1-113D: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-103-8192
Protezione Chiavist

151038192
66558-105: RNCC: 3 | RNVC: 2

12 Jan 1988

5340-15-187-4410
Microswitch Support

151874410
109-0856-33-104: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-15-154-1328
Tappo Di Protezione

151541328
0042102298: RNCC: 3 | RNVC: 2
42102298: RNCC: 3 | RNVC: 2
(241)A39630-116117: RNCC: 5 | RNVC: 2
0-116117: RNCC: 5 | RNVC: 2
1PA39630-116117: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-111-6110
Cable Clamp

151116110
223-001/07: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-203-9945
Paracolpo Gomma

152039945
S6127-50116-901: RNCC: 3 | RNVC: 2
(241)A0126S6127-50116-901: RNCC: 5 | RNVC: 2

2 Aug 2011

5340-15-052-0562
Cerniera Completa

150520562
B910-20-53: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-189-3457
Utility Resilient Mount

151893457
58001A019001: RNCC: 3 | RNVC: 2
(241)A081058001A019001: RNCC: 5 | RNVC: 2

16 Feb 2010

5340-15-152-3542
Double Angle Bracket

151523542
0-173583: RNCC: 3 | RNVC: 2
1PA39630-173583: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-007-3455
Tappo Speciale

150073455
0-30396: RNCC: 3 | RNVC: 2
1PA39630-30396: RNCC: 5 | RNVC: 2

10 Apr 1979

5340-15-116-1636
Attacco A Cerniera

151161636
67367-801D01: RNCC: 3 | RNVC: 2
67367-801D1: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-15-154-1169
Manovella

151541169
0004723608: RNCC: 3 | RNVC: 2
4723608: RNCC: 3 | RNVC: 2
(241)A39630-115216: RNCC: 5 | RNVC: 2
0-115216: RNCC: 5 | RNVC: 2
1PA39630-115216: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-180-2149
Flange

151802149
CFS 102 G: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-118-0345
Supporto Per Blocco

151180345
D0467968: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-121-5876
Extension Drawer Slide

151215876
ADF7602: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-154-1150
Staffa

151541150
0-171056: RNCC: 3 | RNVC: 2
(241)A39630-171056: RNCC: 5 | RNVC: 2
1PA39630-171056: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-156-5209
Control Rod

151565209
21200077-20: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-15-170-3321
Cover

151703321
205-030-496-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-170-5720
Clamp 128X110

151705720
805-4021-007: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-207-2955
Sostegno Elastico

152072955
1576-02-197: RNCC: 3 | RNVC: 2
157602197: RNCC: 3 | RNVC: 2
(241)A0199157602197: RNCC: 5 | RNVC: 2

2 Oct 2012

5340-15-060-9452
Rim Clen Clamp (1)

150609452
F300B1-21: RNCC: 3 | RNVC: 2
F300B1-21: RNCC: 5 | RNVC: 2

20 May 1977

5340-15-005-6914
Tappo Speciale

150056914
0-33689: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-102-2406
Tappo Ingresso Olio

151022406
34121-1: RNCC: 3 | RNVC: 2
34121-1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-156-3435
Handle

151563435
(241)AA1360750-323: RNCC: 3 | RNVC: 2
0750-323: RNCC: 3 | RNVC: 2

30 Jan 2003

5340-15-068-1173
Threaded End Tensioning Tie Rod

150681173
1376-07-316: RNCC: 3 | RNVC: 2
137607316: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-020-2743
Piastrina

150202743
01-097-05-15: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-7165
Distanziale Anello

150077165
50090221-321: RNCC: 5 | RNVC: 9

15 Jul 1980

5340-15-106-0406
Colonnetta

151060406
276-2500-56: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-175-1591
Base With Evaporato

151751591
COD VL 112-205: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-120-5146
Cap

151205146
P-175502-401/402-14E001-204/3: RNCC: 3 | RNVC: 2
P175502-401/402-14E001-204/3: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-15-116-1080
Manual Control Lever

151161080
DPR24072/1-41-119-120: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-027-3690

5340-15-121-2564
Tirante Sinistro Sp

151212564
309-4883-00: RNCC: 3 | RNVC: 2

2 Nov 1995

5340-15-102-1037
Dispositivo Di Mont

151021037
193-0486/23: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-122-1139
Braccio Complessivo

151221139
129-0309-09-101: RNCC: 3 | RNVC: 2

7 May 1996

5340-15-065-7150
Mending Late

150657150
32-07-172: RNCC: 3 | RNVC: 2

7 Aug 1985

5340-15-005-2877
Bracket Cable

150052877
ABS0355-01: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-113-2569
Complessiv Supporto

151132569
615A1710-701: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-198-1989
Piastra

151981989
19239784-2.5: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-15-119-5017
Coperchio

151195017
403/15: RNCC: 3 | RNVC: 2

25 Aug 1994

5340-15-045-3905
Fascetta

150453905
N0R2-505-06-24A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-152-0508
Aiu Bracket

151520508
8854 124-111: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-137-1352
Distanziale

151371352
4S6-4-0489: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-154-0299
Forcella Di Comando

151540299
042116004: RNCC: 3 | RNVC: 2
(241)A39630-955882: RNCC: 5 | RNVC: 2
0-955882: RNCC: 5 | RNVC: 2
1PA39630-955882: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-220-0517
Montante 2 Ipe 400

152200517
S1-136B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-142-7953
Antivibrante

151427953
VZA-R-AVU-90: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-113-2496
Comp Unione Piastra

151132496
345A4460-001: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-202-6043
Confezione Nastri

152026043
BR-DK-11201: RNCC: 3 | RNVC: 2
(241)AE428BR-DK-11201: RNCC: 5 | RNVC: 2

21 May 2007

5340-15-109-6122
Dust And Moisture Seal Protective Cap

151096122
518457-01: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-179-4826
Iso Connector Red

151794826
873-4012-910: RNCC: 3 | RNVC: 2
M0017106: RNCC: 5 | RNVC: 2

22 Jan 2007

5340-15-201-0411
Coperchio Di Protez

152010411
N632U6010201: RNCC: 3 | RNVC: 2
(241)A0126N632U6010201: RNCC: 5 | RNVC: 2

15 May 2006

5340-15-122-2820
Nonmetallic Bumper

151222820
800058304: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-005-9928
Supporto Asta

150059928
20004S4-00: RNCC: 3 | RNVC: 2

11 Aug 1979

5340-15-112-9720
Piastrinaguidacavo

151129720
129-0041-53-101: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-110-7976
Mezzacernieraanastr

151107976
66447-115A01: RNCC: 3 | RNVC: 2
66447-115A1: RNCC: 5 | RNVC: 2

29 Jul 1990

5340-15-116-2583
Piastra Di Montaggi

151162583
SF260-05-42-11: RNCC: 3 | RNVC: 2
SF260-05-42-11: RNCC: 5 | RNVC: 9

31 Mar 1993

5340-15-156-9857
Pickup Handle

151569857
(241)A077442111-MR.80 A-M8: RNCC: 3 | RNVC: 2
42111-MR.80 A-M8: RNCC: 3 | RNVC: 2

31 Mar 2003

5340-15-045-3914
Ghiera

150453914
N0R4-039-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-151-2152
Shock Mount Pad

151512152
010239/2: RNCC: 3 | RNVC: 2
(241)A3334010239/2: RNCC: 4 | RNVC: 1

28 Apr 2000

5340-15-176-6148
Fascetta Meb Mm12 3

151766148
MEB12MM32X50: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-192-0489
Coperchio

151920489
1291-211: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-177-5902
Fermaglio Spallacci

151775902
075054025: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-166-4850
Cerniera Maschio

151664850
035421963: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-102-8075
Testa Di Tirante Fi

151028075
433A1305-001: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-113-0830
Access Door

151130830
109-0320-91-44A1: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-040-3992
Fascetta

150403992
7-4411-100-28324-1: RNCC: 3 | RNVC: 2
7-4411-1-00-28324-1: RNCC: 5 | RNVC: 2

27 Oct 1975

5340-15-120-6087
Piastrina Ritegno B

151206087
204-8929-38-1: RNCC: 3 | RNVC: 2

10 Jul 1995

5340-15-136-7460
Fascetta

151367460
45C20-16: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-157-9268
Leaf Spring Assembly

151579268
0-171326: RNCC: 3 | RNVC: 2
1PA39630-171326: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-134-5659
Ghiera Completa Di

151345659
48191-12: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-149-0797
Supporto Centralina

151490797
20645-29-006: RNCC: 3 | RNVC: 2
20645-29-006: RNCC: 5 | RNVC: 9

23 Nov 1998

5340-15-138-2887
Maniglione

151382887
59123-10: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-006-8990
Control Rod

150068990
39X576-12-01: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-213-8805
Maniglia Master Ner

152138805
MASTERNERANYLON: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-052-1605
Clamp

150521605
A4820: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-152-0515
Grommet

151520515
8854 125-181: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-237-3796
Catenaccio Vertical

152373796
44871-60: RNCC: 3 | RNVC: 2
534015E088635: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-068-6402
Cover Plate Access

150686402
W 011205: RNCC: 3 | RNVC: 2
(7001)5340150686402: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-152-4842
Piastrina Di Sic.6

151524842
17796611: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-166-4999
Hinge

151664999
215A1003003: RNCC: 3 | RNVC: 2
215A1003-003: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-001-9130
Rod Adjuster Assy

150019130
411A2060-401: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-15-000-7217
Lock-Release Lever

150007217
BRP-0326229: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-174-7478
Piatto 30X8 Peaisi1

151747478
54130-01/146: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-114-7589
Guide Base

151147589
01TL20454-01: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-174-7319
Foldable Wing

151747319
825-4012-331: RNCC: 3 | RNVC: 2
M0016893: RNCC: 5 | RNVC: 2

2 Oct 2003

5340-15-061-2680
Electrical-Me Post

150612680
1200096-111312081: RNCC: 5 | RNVC: 2
000200102700: RNCC: 5 | RNVC: 2
000200102700: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-116-1969
Corrosion Preventive Anode

151161969
4SF76-024: RNCC: 3 | RNVC: 2

17 Jul 1993

5340-15-000-0262
Angle Bracket

150000262
HPI-0770/01: RNCC: 3 | RNVC: 2

22 Jan 2013

5340-15-124-1718
Supporto Antivibran

151241718
V1B-0152-01: RNCC: 3 | RNVC: 2
V1B-0152-01: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-181-7414
Tappi Chiudi Foro C

151817414
T12: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-107-6757
Resilient Mount

151076757
LPS 41039-1: RNCC: 3 | RNVC: 2
LPS 41039-1: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-15-142-5642
Cerniera

151425642
193-10: RNCC: 3 | RNVC: 2
193-10: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-145-1605
Staffa Montaggio

151451605
196661G1: RNCC: 3 | RNVC: 2

28 May 1997

5340-15-170-8114
Custodia

151708114
313-0116/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-234-5016
Staffa Da 100 Coppi

152345016
6050.3.150-10: RNCC: 3 | RNVC: 2
534015E046245: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-137-8041
Filo Metallico

151378041
1113-17-114: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-189-8959
Staffa A Parete

151898959
VSADT-100WM: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-115-8610
Slide Teles

151158610
285009P1: RNCC: 3 | RNVC: 2
71-02-008-005: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-055-1135
Fascetta Stringitub

150551135
61151-13: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-008-3650
Rubber Bumper

150083650
22937-101: RNCC: 3 | RNVC: 2

1 Sep 1981

5340-15-155-4249
Corrosion Preventive Anode

151554249
ZN/1X1.5: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-15-100-0847
Connecting Stub

151000847
73220F01: RNCC: 3 | RNVC: 2
73220F01: RNCC: 5 | RNVC: 2

23 Mar 1987

5340-15-063-8956
Ammortizzatore Di B

150638956
553802012000: RNCC: 2 | RNVC: 3
538-02-0120: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-212-4279
Punti X Graffettatr

152124279
88/12MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-114-2402
Tirante

151142402
04-10-667-2: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-4394
Turnbuckle

150744394
1A12UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-065-8671
Estrattore Per Cart

150658671
160-6131/01: RNCC: 3 | RNVC: 2

11 Mar 1985

5340-15-101-2999
Hinge Half

151012999
P-135203-001: RNCC: 3 | RNVC: 2
P135203-001: RNCC: 5 | RNVC: 2

30 Jan 1988

5340-15-115-3453
Cap

151153453
500-9070-012: RNCC: 3 | RNVC: 2
82-01635: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-170-9283
Inner Front Flange

151709283
6102315310: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-216-9662
Piedini

152169662
0770: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-151-4081
Staffa

151514081
0-161067: RNCC: 3 | RNVC: 2
(241)A39630-161067: RNCC: 5 | RNVC: 2
1PA39630-161067: RNCC: 5 | RNVC: 2

22 May 2000

5340-15-149-3759
Plate

151493759
518-01-1620: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-148-7486
Tappo Speciale

151487486
2103-0018-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-100-7986
Slitta

151007986
000900280500: RNCC: 5 | RNVC: 2
000900280500: RNCC: 5 | RNVC: 9

20 Nov 1986

5340-15-236-3092
Serratura Da Infila

152363092
52611-45: RNCC: 3 | RNVC: 2
534015E004358: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-218-0335
Lucchetto A Combina

152180335
FF-P-110-G: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-042-6564
Fascetta Pca 5Mm Sp

150426564
9781-15: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-050-1503
Asta Filettata

150501503
4-3181-201-41815-1: RNCC: 3 | RNVC: 2
4-3181-2-01-41815-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-149-6108
Handle Assy

151496108
518-38-0140: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-151-4809
Piastrina

151514809
0042116107: RNCC: 3 | RNVC: 2
(241)A39630-117005: RNCC: 5 | RNVC: 2
0-117005: RNCC: 5 | RNVC: 2
1PA 39630-117005: RNCC: 5 | RNVC: 2

30 May 2000

5340-15-205-1148
Shaft Joint

152051148
131-0001 ITEM 46: RNCC: 3 | RNVC: 2
131-0003 ITEM 46: RNCC: 3 | RNVC: 2
21310095: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-15-189-5373
Fascetta

151895373
360C62-0806M: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-151-1444
Assieme Staffa Di F

151511444
381-0354/01: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-15-065-1165
Squadretta Supporto

150651165
A1-23036-009: RNCC: 3 | RNVC: 2
A1-23036-009: RNCC: 5 | RNVC: 9

27 Oct 1984

5340-15-062-2006
Mount Shock

150622006
P-892871-009: RNCC: 3 | RNVC: 2
P892871-009: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-193-8121
Mounting Plate

151938121
SPE-J-943-A-9001/008: RNCC: 3 | RNVC: 2
(241)A0019SPE-J-943-A-9001/008: RNCC: 5 | RNVC: 2

19 Jul 2010

5340-15-121-1026
Serie Maniglie E Ch

151211026
RC2035/261/94: RNCC: 3 | RNVC: 2

23 Jan 1996

5340-15-116-0125
Helical Compression Spring Seat

151160125
61524: RNCC: 3 | RNVC: 2
61524F01: RNCC: 3 | RNVC: 2
73681: RNCC: 3 | RNVC: 2
61524F01: RNCC: 3 | RNVC: 2
73681F02: RNCC: 3 | RNVC: 2
61524F01: RNCC: 5 | RNVC: 2
73681F02: RNCC: 5 | RNVC: 2
73681F02: RNCC: 5 | RNVC: 9
61524F01: RNCC: 5 | RNVC: 9
73681F02: RNCC: 5 | RNVC: 9

2 Nov 1993

5340-15-127-4462
Molla

151274462
1740-16-042: RNCC: 3 | RNVC: 2
1740-16-042: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-182-8616
Tasselli Fischer

151828616
FISCHERCORTO: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-001-3435
Manual Control Handle

150013435
1129154P01-00: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-216-8820
Kit 4 Ruote Piroett

152168820
RUOTE ARMADIO MIRAGE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-169-4702
Lucchetto S&G

151694702
F72012983: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-104-8912
Fissaggio Gaffetta

151048912
4563877: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-121-5994
Safety Pin

151215994
SS972: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-104-8889
Fissaggio Gaffetta

151048889
4625281: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-122-1965
Pipe

151221965
75128: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-206-0301
Angle Bracket

152060301
J04841652-002: RNCC: 3 | RNVC: 2
(241)A0019J04841652-002: RNCC: 5 | RNVC: 2

4 May 2012

5340-15-194-1822
Angle Bracket

151941822
210F506-7100-01: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-15-059-8828
Spruzzatore Idrorep

150598828
93932-101: RNCC: 3 | RNVC: 2

16 Sep 1976

5340-15-040-8300
Fascetta

150408300
7-4411-100-28324-4: RNCC: 3 | RNVC: 2
7-4411-1-00-28324-4: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-054-9850
Piastrina Di Fermo

150549850
204-1140-73-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-113-2010
Dispositivodifissag

151132010
301-0042/01: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-107-0746
Coperchio Di Access

151070746
F46-02: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-119-7696
Synchro Clamp

151197696
TN4-0023-031-22: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-112-8600
Puntalino

151128600
468180: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-129-8458
Molla

151298458
729533: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-049-5052
Distanziale

150495052
2-5295-111-33754-1: RNCC: 3 | RNVC: 2
2-5295-1-11-33754-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-150-2572
S Assieme Supporto

151502572
26-6-21-21D: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-15-154-1979
Staffa

151541979
0-167191: RNCC: 3 | RNVC: 2
(241)A39630-167191: RNCC: 5 | RNVC: 2
1PA39630-167191: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-203-9729
Turnbuckle

152039729
52002038: RNCC: 3 | RNVC: 2
(241)A486752002038: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-170-3473
Guide

151703473
206-001-122-3: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-120-8300
Supporto Resolver

151208300
129-0308-67-102: RNCC: 3 | RNVC: 2

25 Aug 1995

5340-15-007-3638
Fascetta Speciale

150073638
0-33482: RNCC: 3 | RNVC: 2
1PA39630-33482: RNCC: 5 | RNVC: 2

10 Apr 1979

5340-15-116-1144
Piastrina Di Blocca

151161144
DPR24130/2-18: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-121-5294
Resilient Mount

151215294
VZA-R-AVU1000: RNCC: 3 | RNVC: 2

24 May 1996

5340-15-162-3370
Retaining Clamp Assembly

151623370
D1217892: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-147-6310
Manual Control Lever

151476310
P-1803: RNCC: 3 | RNVC: 2

5 Feb 1998

5340-15-101-6327
Corrosion Preventive Anode

151016327
C84328-2-41: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-154-1449
Piastra

151541449
0-115134: RNCC: 3 | RNVC: 2
(241)A39630-115134: RNCC: 5 | RNVC: 2
1PA39630-115134: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-065-5986
Semicerniera Comple

150655986
212-4600-13-5: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-065-6858
Lh Latch Assy

150656858
P884036-403: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-120-8510
Manual Control Handle

151208510
230-09-3016: RNCC: 3 | RNVC: 2
723009301600: RNCC: 3 | RNVC: 2
PS35M12: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-152-7140
Threaded End Tensioning Tie Rod

151527140
709321-10: RNCC: 3 | RNVC: 2
8197498: RNCC: 5 | RNVC: 2
709321-10: RNCC: 5 | RNVC: 9

18 Oct 2000

5340-15-120-1650
Installation Kit

151201650
198-2004/01: RNCC: 3 | RNVC: 2

17 Jan 1995

5340-15-170-3519
Clevis

151703519
206-010-358-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-204-6581
Corrosion Preventive Anode

152046581
410-027-032: RNCC: 3 | RNVC: 2
(241)A1823410-027-032: RNCC: 5 | RNVC: 2

5 Dec 2011

5340-15-151-9367
Double Angle Bracket

151519367
0-172490: RNCC: 3 | RNVC: 2
00172490: RNCC: 3 | RNVC: 2
(241)A39630-172490: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-174-7560
Prodot. X Microinc

151747560
59999-31/005: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-057-6976
Piastrina Di Tenuta

150576976
2124-163-0155: RNCC: 3 | RNVC: 2
2124-163-0155: RNCC: 5 | RNVC: 9

2 May 1974

5340-15-121-3973
Contrappeso

151213973
109-8101-55-1: RNCC: 3 | RNVC: 2

11 Dec 1995

5340-15-112-8173
Gruppog

151128173
272217: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-105-2535
Piastra Rattoppo Ri

151052535
999690130J: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-041-9339
Distanziale

150419339
AS6-4-0-465: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-9051
Padlock

151209051
3243/7-30: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-198-6608
Corrosion Preventive Anode

151986608
DN60-DE70: RNCC: 3 | RNVC: 2

25 Oct 2004

5340-15-110-2799
Bracket Ele

151102799
P125385-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-106-9796
Chiavistello Molla

151069796
5086-03-44: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-231-1109
Lucchetto Ad Arco M

152311109
28050-56: RNCC: 3 | RNVC: 2
534015E062552: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-151-9615
Staffa

151519615
0-173229: RNCC: 3 | RNVC: 2
00173229: RNCC: 3 | RNVC: 2
(241)A39630-173229: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-15-115-3367
Clamp

151153367
9-3630-037: RNCC: 3 | RNVC: 2
82-01795: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-041-7687
Perno

150417687
2-5327-106-41499: RNCC: 3 | RNVC: 2
2-5327-1-06-41499: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-009-2245
Helical Compression Spring Seat

150092245
973-002-250-4: RNCC: 3 | RNVC: 2
00056106: RNCC: 4 | RNVC: 1
9730022504: RNCC: 5 | RNVC: 2
(241)A396300056106: RNCC: 5 | RNVC: 2
9932534: RNCC: 5 | RNVC: 2

22 Sep 1981

5340-15-109-6401
Guida

151096401
714882-0001: RNCC: 3 | RNVC: 2

23 Mar 1990

5340-15-064-6989
Hinge

150646989
P155114-006: RNCC: 3 | RNVC: 2

10 Jun 1984

5340-15-150-6440
Scatola Serratura

151506440
SF260-11-130-01PR: RNCC: 3 | RNVC: 2
SF260-11-130-01PR: RNCC: 5 | RNVC: 9

20 Dec 1999

5340-15-126-4492
Molla

151264492
14560-18: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-156-3621
Blades Protection

151563621
(241)A3460CBD71200P01: RNCC: 3 | RNVC: 2
CBD71200P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-074-4027
Turnbuckle

150744027
1A6UNI20180T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-100-4997
Resilient Mount

151004997
638102: RNCC: 3 | RNVC: 2
638102: RNCC: 5 | RNVC: 9

8 Mar 1984

5340-15-154-2042
Staffa

151542042
0-168436: RNCC: 3 | RNVC: 2
(241)A39630-168436: RNCC: 5 | RNVC: 2
1PA39630-168436: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-020-1917
Anello

150201917
01-231P16: RNCC: 3 | RNVC: 2
01-231P10: RNCC: 3 | RNVC: 2
55.17.005.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-207-2633
Dust And Moisture Seal Protective Plug

152072633
T-720103-115: RNCC: 3 | RNVC: 2
(241)S6070T-720103-115: RNCC: 5 | RNVC: 2

27 Sep 2012

5340-15-149-7703
Serie Anelli Per Am

151497703
RG-MM100-4: RNCC: 3 | RNVC: 2
(241)A3290RG-MM100-4: RNCC: 5 | RNVC: 2

21 Jun 1999

5340-15-218-9280
Strap

152189280
767-1935-007: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-157-9824
Hinge Half

151579824
J94345362-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-153-3302
Threaded End Tensioning Tie Rod

151533302
A16UNI2023-AQ34-673FOS: RNCC: 3 | RNVC: 2
230022204: RNCC: 5 | RNVC: 2

14 Dec 2000

5340-15-107-8056
Seat Pipe Support

151078056
60062-002: RNCC: 3 | RNVC: 2

2 Jun 1989

5340-15-147-5130
Cap Assy

151475130
44856-001: RNCC: 5 | RNVC: 2
44856-001: RNCC: 5 | RNVC: 9
44856-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-134-4922
Staffa Dx

151344922
4410101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-203-9709
Rotella

152039709
22500676: RNCC: 3 | RNVC: 2
(241)A486722500676: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-155-4981
Moving Support

151554981
CBD70794P04: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-180-5608
Cavo Bowden

151805608
20255144: RNCC: 3 | RNVC: 2
(241)A424942556761: RNCC: 5 | RNVC: 2
42556761: RNCC: 5 | RNVC: 2

18 Jun 2008

5340-15-105-4202
Cappuccio Parapolve

151054202
2.4629.023.2: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-3790
Assembled Nut Retainer

151123790
58714: RNCC: 2 | RNVC: 2
58714F01: RNCC: 3 | RNVC: 2
58714F01: RNCC: 5 | RNVC: 2
7348F01: RNCC: 5 | RNVC: 9

4 May 1999

5340-15-157-9823
Hinge Assy

151579823
J94345361-402: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-057-2892
Threaded End Tensioning Tie Rod

150572892
1376-08-117: RNCC: 3 | RNVC: 2
137608117: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-137-1712
Fermaglio

151371712
786151-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-122-1309
Latch

151221309
A-39239-401: RNCC: 3 | RNVC: 2
A39239-401: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-184-5009
Spring

151845009
2001-0097-05: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-204-6929
Clamp Block Assy

152046929
109-0761-97-119: RNCC: 3 | RNVC: 2

13 Dec 2011

5340-15-145-1649
Handle

151451649
P893227-401: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-15-110-2057
Semicernieraspecial

151102057
109-0311-68-101: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-151-9741
Bolt And Spacer Kit

151519741
720-112-078: RNCC: 3 | RNVC: 2

31 Aug 2000

5340-15-121-4091
Plate Mouting

151214091
SF260-05-44-101: RNCC: 3 | RNVC: 2
SF260-05-44-101: RNCC: 5 | RNVC: 9

12 Dec 1995

5340-15-107-7750
Tenditore Compl.

151077750
205-0960-95-101: RNCC: 3 | RNVC: 2
(241)A0126205-0960-95-101: RNCC: 5 | RNVC: 2

29 Jun 1988

5340-15-108-8006
Resilient Mount

151088006
89900321: RNCC: 3 | RNVC: 2
9981109: RNCC: 5 | RNVC: 2

20 Apr 1988

5340-15-174-7557
Materiali Sviluppo

151747557
58634-88/005: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-166-5150
Ruota In Gomma

151665150
2270087: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-155-0054
Connect Door Access

151550054
J52445003-402: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-15-001-8926
Pattino Di Metallo

150018926
8873/64/5015-17: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-054-8814
Threaded End Tensioning Tie Rod

150548814
546-03-1060: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-157-8528
Puntale

151578528
0-107384: RNCC: 3 | RNVC: 2
1PA39630-107384: RNCC: 5 | RNVC: 2
(241)A39630-107384: RNCC: 5 | RNVC: 2

17 Nov 2003

5340-15-100-1072
Chiavistello

151001072
P-882577-406: RNCC: 3 | RNVC: 2
P882577-406: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-15-201-4536
An Bracket Assembly

152014536
212-1135-17-107: RNCC: 3 | RNVC: 2
(241)A0126212-1135-17-107: RNCC: 5 | RNVC: 2

18 Sep 2006

5340-15-162-6678
Nonmetallic Bumper

151626678
D1215825: RNCC: 3 | RNVC: 2
7377581: RNCC: 5 | RNVC: 2
7377581: RNCC: 5 | RNVC: 2

7 Dec 2001

5340-15-006-5018
Electrical-Me Post

150065018
W002714A: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-180-5166
Sealing Plug Assembly

151805166
262601208ZT114: RNCC: 3 | RNVC: 2
(241)A9840262601208ZT114: RNCC: 5 | RNVC: 2

10 Jun 2008

5340-15-220-0475
Supporto Interm. Pi

152200475
S1-91C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-107-7768
Maniglia.Complessiv

151077768
140-0584/02: RNCC: 3 | RNVC: 2

9 Jun 1989

5340-15-201-1469
Pipe Bracket

152011469
254A1554-405: RNCC: 3 | RNVC: 2
(241)A0019254A1554-405: RNCC: 5 | RNVC: 2

11 Jun 2006

5340-15-170-8282
Plate

151708282
340-5769/01.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-041-8010
Forcella

150418010
4-3175-301-41822: RNCC: 3 | RNVC: 2
4-3175-301-41822-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-119-3590
Resilient Mount

151193590
VZA-D-AVU/1000/RAD: RNCC: 3 | RNVC: 2

27 Mar 1995

5340-15-105-5975
Staffa A Gomito

151055975
22217: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-5126
Tassello 'N' 8X100

151665126
N80100: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-215-0318
Fascetta Per Cablag

152150318
L6652/2-203: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-206-2602
Utility Resilient Mount

152062602
94110-01: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-107-4123
Speciale Ghiera

151074123
71-07020: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-194-8715
Plate Locking

151948715
3128073: RNCC: 3 | RNVC: 2
450/24414: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-170-7730
Exp. Rubber Frame

151707730
340-5883/01.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-188-7419
Door(Rh)

151887419
109-0641-37-140: RNCC: 3 | RNVC: 2

5 Nov 2009

5340-15-203-6068
Tampone Ammortizzat

152036068
7430NBR4R-06: RNCC: 3 | RNVC: 2
7430NBR4R-06: RNCC: 5 | RNVC: 2

20 Jun 2011

5340-15-148-7510
Tappo Attuatore

151487510
2104-0052-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-101-7915
Rubber Bumper

151017915
V-126/18: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-122-4576
Staffa Ferro L

151224576
208807: RNCC: 3 | RNVC: 2

26 Jul 1996

5340-15-120-4776
Elemento Elastico A

151204776
1Q 545957LB: RNCC: 3 | RNVC: 2
1Q 545957LB: RNCC: 5 | RNVC: 9

5 Nov 1996

5340-15-153-8100
Base (1) Per Sosteg

151538100
01800A113880: RNCC: 5 | RNVC: 3
01800A113880: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-108-8708
Resilient Mount

151088708
595/RSVM65-280A/OR-553667: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-020-2626
Dust And Moisture Seal Protective Plug

150202626
01-098-01-93: RNCC: 3 | RNVC: 2
55.41.077.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-206-5788
Utility Resilient Mount

152065788
HD-45/S-40: RNCC: 3 | RNVC: 2
(241)A4997HD-45/S-40: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-205-1408
Escutcheon Plate

152051408
3386216Z02: RNCC: 3 | RNVC: 2
(241)AB5553386216Z02: RNCC: 5 | RNVC: 2

21 Feb 2012

5340-15-127-3684
Anello

151273684
1306-60-009: RNCC: 3 | RNVC: 2
1306-60-009: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-220-0792
Lh(Super Hinge Assy

152200792
311A7310-403: RNCC: 3 | RNVC: 2
(241)A0019311A7310-403: RNCC: 5 | RNVC: 2

16 Nov 2005

5340-15-170-8864
Bevestigungsvorr. L

151708864
TE403609/A.015.21: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-068-4443
Chiavistello

150684443
39A1202-10-02: RNCC: 3 | RNVC: 2

2 Jul 1986

5340-15-154-0368
Dispositivo Di Arre

151540368
0-113837: RNCC: 3 | RNVC: 2
(241)A39630-113837: RNCC: 5 | RNVC: 2
1PA39630-113837: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-157-9130
Double Angle Bracket

151579130
0-157129: RNCC: 3 | RNVC: 2
(241)A39630-157129: RNCC: 5 | RNVC: 2
1PA39630-157129: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-174-7413
Inserto Per Guide

151747413
341-4028/11: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-179-6522
Bag

151796522
873-8433-006: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-149-2489
Dispositivo Antiurt

151492489
TM119089/802: RNCC: 3 | RNVC: 2

26 Jul 1999

5340-15-195-3635
Access Door Locking Ring

151953635
LD3-DJET-007: RNCC: 3 | RNVC: 2
DGB-13KL-015: RNCC: 3 | RNVC: 2
(241)AE591DGB-13KL-015: RNCC: 5 | RNVC: 2
(241)AE591LD3-DJET-007: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-060-1573
Cover Plate Access

150601573
1376-61-364: RNCC: 3 | RNVC: 2
137661364: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-231-1123
Catenacci Verticali

152311123
COMBI 210: RNCC: 3 | RNVC: 2
534015E088270: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4036
Turnbuckle

150744036
2A22UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-170-7491
Parallel Device

151707491
4501090050: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-126-2758
Handwheel

151262758
2611-2: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-116-8548
Cilindro Fondello

151168548
D1405585: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-136-9419
Morsetto

151369419
45C26D16-16: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-153-5034
Half Hinge

151535034
J57140700-001: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-053-9468
Spina Per Cerniera

150539468
260-05-02-19: RNCC: 3 | RNVC: 2
260-05-02-19: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-182-7024
Picchetto

151827024
315.4000: RNCC: 3 | RNVC: 2
315.4000: RNCC: 5 | RNVC: 9

30 Dec 2008

5340-15-121-0923
Corrosion Preventive Anode

151210923
2C-A/T/12/L/0: RNCC: 3 | RNVC: 2
TI-A1-300: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-15-102-8088
Testa Di Tirante Fi

151028088
433A1304-401: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-110-6673
Resilient Mount

151106673
1211-03-212: RNCC: 3 | RNVC: 2

15 Jan 1990

5340-15-151-9840
Tirante

151519840
0-153414: RNCC: 3 | RNVC: 2
00153414: RNCC: 3 | RNVC: 2
(241)A396300153414: RNCC: 5 | RNVC: 2
(241)A39630-153414: RNCC: 5 | RNVC: 2

31 Jul 2000

5340-15-067-2623
Anodo

150672623
A02-1233-104-3: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-065-7255
Eccentrico

150657255
109-0700-55-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-141-1192
Tassello In Accaio

151411192
SBS8/4VITE/TGS: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-193-6634
Quick Release Plunger

151936634
163123294: RNCC: 3 | RNVC: 2
GN 113-5-15: RNCC: 3 | RNVC: 2
(241)A0199163123294: RNCC: 5 | RNVC: 2
(241)A0774GN113-5-15: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-005-7992
Anello

150057992
487A105: RNCC: 3 | RNVC: 2

20 May 1979

5340-15-062-2651
Staffa Speciale

150622651
4-21815D: RNCC: 5 | RNVC: 2
4-21815D: RNCC: 5 | RNVC: 9

29 Jun 1981

5340-15-102-9573
Supporto Alettone

151029573
808-28691-1A: RNCC: 3 | RNVC: 2

23 Aug 1988

5340-15-105-6031
Staffa A Gomito

151056031
22998: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-4661
Nut And Bolt Locking Plate

151184661
M04191/8: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-176-6146
Fascetta Meb Mm12 6

151766146
MEB12MM60X80: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-203-1866
Support

152031866
P75TC415A43-001: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-174-7487
Tondo 25Pealsimgmn

151747487
54230-02/077: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-109-3861
Nut And Bolt Locking Plate

151093861
5137-291-44: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-170-1885
Clamp Cap

151701885
67251-07/005: RNCC: 3 | RNVC: 2

12 Nov 2002

5340-15-114-4085
Tappochiavistelloli

151144085
G610-12-26-04: RNCC: 3 | RNVC: 2
(241)A2142G610-12-26-04: RNCC: 5 | RNVC: 2
(7001)5340151144085: RNCC: 5 | RNVC: 2

11 Jun 1992

5340-15-062-4323
Snap Hook

150624323
93614-003: RNCC: 3 | RNVC: 2

7 Jun 1982

5340-15-049-7462
Blocchetto Gomma

150497462
AB682-107-9: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-147-3626
Anima

151473626
5338-3: RNCC: 3 | RNVC: 2
5338-3: RNCC: 5 | RNVC: 9

31 Oct 1997

5340-15-064-4003
Resilient Mount

150644003
8556262: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-062-7936
Stripper Waxed Thre

150627936
0-34187: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-067-2792
Molla

150672792
8051/1: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-137-1225
Protezione

151371225
71028-6: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-215-2994
Maschera Per Saldar

152152994
ABC M3820/5: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-151-9875
Staffa

151519875
0-163672: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-190-3366
Fascetta

151903366
19025: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-006-1163
Barra Accoppiamento

150061163
20005A7-00: RNCC: 3 | RNVC: 2

7 Oct 1979

5340-15-205-2711
Dust And Moisture Seal Protective Cover

152052711
D1-27038-001: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-121-5514
Boccola Fermafilo

151215514
129-0041-39-101: RNCC: 3 | RNVC: 2

16 Jan 1996

5340-15-155-4251
Lifting Ring

151554251
TYPE S87-8: RNCC: 3 | RNVC: 2

20 Mar 2002

5340-15-111-7963
Double Angle Bracket

151117963
00080166: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-101-2959
Bnc Adapter Assy

151012959
285052P1: RNCC: 3 | RNVC: 2
71-90-003: RNCC: 5 | RNVC: 2

30 Jan 1988

5340-15-108-0943
Einsatz

151080943
A81197-01-21: RNCC: 3 | RNVC: 2
A81197-01-21: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-107-1869
Support Components

151071869
C7188-W2-B3: RNCC: 3 | RNVC: 2
C7188-W2-B3: RNCC: 5 | RNVC: 2
C7188-W2-B3: RNCC: 5 | RNVC: 9

10 Apr 1989

5340-15-008-0216
Door Access Aircraf

150080216
109-0320-91-44: RNCC: 3 | RNVC: 2

25 May 1982

5340-15-162-5602
Helical Compression Spring Seat

151625602
3014-003: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-15-040-3543
Pomello

150403543
6-3137-100-23043: RNCC: 3 | RNVC: 2
6-3137-1-00-23043: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-115-8267
Giuntopreformato

151158267
004-SPL-02P: RNCC: 3 | RNVC: 2

21 Jan 1993

5340-15-117-4876
Protezione Chiavist

151174876
66019-101A01: RNCC: 3 | RNVC: 2
66019-101A1: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-15-100-8075
Arresto A Rullino

151008075
109-0362-03-1: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-156-3870
Bracket

151563870
CBD71354P04: RNCC: 3 | RNVC: 2
(241)A3460CBD71354P04: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-064-9024
Staffa Portafanale

150649024
152779: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-15-151-2736
Screw Threa Insert

151512736
3202336: RNCC: 3 | RNVC: 2
553202336000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-006-1432
Dust And Moisture Seal Protective Cap

150061432
3584-22: RNCC: 3 | RNVC: 2
3584-22: RNCC: 5 | RNVC: 9

6 Sep 1979

5340-15-061-4790
Rim Clen Clamp (1)

150614790
L304A2-3: RNCC: 5 | RNVC: 2
1200096-113100048: RNCC: 5 | RNVC: 2
L304A2-3: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-111-5967
Guide

151115967
A05646-01-24: RNCC: 3 | RNVC: 2
A05646-01-24: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-184-4974
Anello

151844974
335-1140: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-067-8041
Scontro

150678041
GALP40201-3D: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-170-8574
Lastra 358X272x0.8

151708574
58311-11/033: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-147-5911
Manual Control Lever

151475911
60-13512-00: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-200-4255
Set Di Chiodi

152004255
OMP-TEN-016: RNCC: 3 | RNVC: 2
(241)AE591OMP-TEN-016: RNCC: 5 | RNVC: 2

18 Jan 2006

5340-15-193-3374
Key Blank

151933374
DOM-DM63: RNCC: 3 | RNVC: 2

6 May 2010

5340-15-205-1153
Pin Kit

152051153
150-6552 ITEM 73: RNCC: 3 | RNVC: 2
21506596: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-15-181-7743
Elettroserratura Da

151817743
14510: RNCC: 3 | RNVC: 2
14510-80: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-145-2095
Handle

151452095
SF260-15-34-11: RNCC: 3 | RNVC: 2
SF260-15-34-11: RNCC: 5 | RNVC: 9

2 Jun 1997

5340-15-139-4773
Cerniera Per Chiusu

151394773
4882651: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-193-8160
Bracket

151938160
SPE-J-943-A-9001/146: RNCC: 3 | RNVC: 2
(241)A0019SPE-J-943-A-9001/146: RNCC: 5 | RNVC: 2

19 Jul 2010

5340-15-202-6938
Sealing Plug Assembly

152026938
BW 010.9: RNCC: 3 | RNVC: 2
(241)AF180BW010.9: RNCC: 5 | RNVC: 2

21 Jun 2007

5340-15-154-2090
Staffa

151542090
0-169077: RNCC: 3 | RNVC: 2
(241)A39630-169077: RNCC: 5 | RNVC: 2
1PA39630-169077: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-151-9393
Staffa

151519393
0-173850: RNCC: 3 | RNVC: 2
00173850: RNCC: 3 | RNVC: 2
(241)A39630-173850: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-050-3604
Tornichetto

150503604
EF6-50B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-115-8467
Bracket

151158467
264431G2: RNCC: 3 | RNVC: 2
71-02-007-005: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-045-3354
Control Rod

150453354
591-12-26: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-1117
Nonrotating Shaft Eye Bracket

151071117
301-02-1120: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-105-8201
Sostegno Elastico

151058201
E86-8635-50: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-198-5835
Lh Support Assy

151985835
21366-001: RNCC: 3 | RNVC: 2

15 Oct 2004

5340-15-115-8579
Bracket

151158579
277109G1: RNCC: 3 | RNVC: 2
71-02-005-006: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-108-3244
Accesso Coperchio

151083244
70312: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-8120
Handwheel

151128120
468651: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-1963
Gv Pushrod Actuator

151151963
395-5200-250: RNCC: 3 | RNVC: 2
82-00780: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-045-2928
Fascetta

150452928
N0R2-505-06-15A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-100-8944
Fermo Compl

151008944
109-0323-17-3: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-170-8119
Traversa Supp. Mano

151708119
340-0727/20: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-001-8462
Cap

150018462
ED0021450140-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-120-5459
Access Door

151205459
322207F91: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-041-2240
Piastrina S

150412240
1-1023-101-33279: RNCC: 3 | RNVC: 2
1-1023-1-01-33279: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-148-9440
Speciale Coperchio

151489440
2302-0080-001: RNCC: 3 | RNVC: 2

5 Nov 1998

5340-15-122-5577
Rear Cover

151225577
01TL21029-01: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-009-7123
Cover Plate Access

150097123
1236-16-123: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-120-5460
Access Door

151205460
322208F91: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-198-0868
Resilient Mount

151980868
DNP-40: RNCC: 3 | RNVC: 2
MG-DNP-40: RNCC: 3 | RNVC: 2
(241)A4997DNP-40: RNCC: 5 | RNVC: 2
(241)A4997MG-DNP-40: RNCC: 5 | RNVC: 2

10 Jun 2004

5340-15-154-0939
Fascetta

151540939
0-150511: RNCC: 3 | RNVC: 2
00150511: RNCC: 3 | RNVC: 2
(241)A39630-150511: RNCC: 5 | RNVC: 2
1PA39630-150511: RNCC: 5 | RNVC: 2
98150511: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-207-5954
Dust And Moisture Seal Protective Cap-Plug

152075954
86.O.06700SX: RNCC: 3 | RNVC: 2
(241)A393686.O.06700SX: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-110-9306
Supportorigido

151109306
91286-001B01: RNCC: 3 | RNVC: 2
91286-001B1: RNCC: 5 | RNVC: 2

12 Sep 1990

5340-15-220-0457
Pann.Basso 2400Hx57

152200457
S1-63: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-185-6026
Serratura Da Applic

151856026
431-70-3E: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-001-3044
Sliding Block

150013044
395382: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-142-5363
Anodo

151425363
AT-8T100-73-12: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-107-0671
Shock Mount Pad

151070671
B04-05: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-105-6001
Staffa A Gomito

151056001
8978/D: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-062-1871
Cap Protective

150621871
P-892632-001: RNCC: 3 | RNVC: 2
P892632-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-102-0053
Threaded End Tensioning Tie Rod

151020053
V44/1-0310-201: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-150-4495
Assieme Supporto Sp

151504495
2302-0283-001: RNCC: 3 | RNVC: 2

11 Nov 1999

5340-15-026-5343

5340-15-040-6554
Fascetta

150406554
1-2756-125-28466-1: RNCC: 3 | RNVC: 2
1-2756-1-25-28466-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-107-0099
Supporto Rotella Or

151070099
C-6000-1214: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-053-5967
Tampone

150535967
83-0537-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-119-7540
Grip

151197540
P-160502-401/402-12C001-207: RNCC: 3 | RNVC: 2
P160502-401/402-12C001-207: RNCC: 5 | RNVC: 2

17 Nov 1994

5340-15-158-4387
Half Hinge

151584387
27975-101: RNCC: 3 | RNVC: 2

15 Feb 2004

5340-15-234-4036
Collare Fissaggio F

152344036
5634.01FT-2": RNCC: 3 | RNVC: 2
534015E066777: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-054-8849
Threaded End Tensioning Tie Rod

150548849
533-52-1950: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-194-5129
Extension Drawer Slide

151945129
ASN43-850: RNCC: 3 | RNVC: 2
(241)A5630ASN43-850: RNCC: 5 | RNVC: 2

29 Nov 2010

5340-15-115-8468
Bracket

151158468
245451G1: RNCC: 3 | RNVC: 2
71-02-005-014: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-007-9585
Dust And Moisture Seal Protective Cap

150079585
4418203: RNCC: 3 | RNVC: 2
4418203: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-193-1582
Angle Bracket

151931582
504147895: RNCC: 3 | RNVC: 2
(241)A4249504147895: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-102-8754
Dust And Moisture Seal Protective Cap

151028754
1P276020: RNCC: 3 | RNVC: 2
1P276020: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-207-5983
Dust And Moisture Seal Protective Cap-Plug

152075983
179040110: RNCC: 3 | RNVC: 2
(241)A3936179040110: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-178-5212
Kit Filler

151785212
KRC 48 V: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-114-7161
Control Rod

151147161
03-619-A-26: RNCC: 1 | RNVC: 3
(7001)5340151147161: RNCC: 3 | RNVC: 2
52997: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-15-207-2727
Mounting Tray

152072727
RAC-0020/01: RNCC: 3 | RNVC: 2
(241)A0069RAC-0020/01: RNCC: 5 | RNVC: 2

1 Oct 2012

5340-15-108-0765
Metal Runner

151080765
32-07-126: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-186-8793
Clip Spring Tension

151868793
206-040-568-101: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-060-9457
Rim Clen Clamp (1)

150609457
F442D2C7: RNCC: 3 | RNVC: 2
F442D2C-7: RNCC: 5 | RNVC: 2
F442D2C-7: RNCC: 5 | RNVC: 2

22 May 1977

5340-15-174-7593
Fresa Cil.X Pcs 38X

151747593
62329-25/012: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-105-2960
Poker

151052960
10560/1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-100-8515
Portamolle

151008515
109-0101-98-5: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-045-3909
Fascetta

150453909
N0R2-505-06-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-206-4700
Stand Base

152064700
109-0315-56-137: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-15-119-6584
Installazione Fasce

151196584
A6135-90001-1: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-15-122-1347
Hook Assy

151221347
A-39049-401: RNCC: 3 | RNVC: 2
A39049-401: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-110-1585
Tacchettofilettato

151101585
1455-10-252: RNCC: 3 | RNVC: 2

30 Jan 1990

5340-15-220-0510
Lamiera Elcom Sys L

152200510
S1-145P: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-119-6426
Double Angle Bracket

151196426
81671: RNCC: 3 | RNVC: 2
93191500: RNCC: 5 | RNVC: 2
81671: RNCC: 5 | RNVC: 9

10 Oct 1994

5340-15-174-7474
Piatto 10X5 Peaisi1

151747474
54130-01/026: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-150-5879
Angolare

151505879
A37211-01-20: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-151-9959
Piastra

151519959
0-173803: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-121-5668
Engine Accessory Bracket

151215668
1S 513716: RNCC: 3 | RNVC: 2
1S 513716: RNCC: 5 | RNVC: 9

13 Sep 1996

5340-15-180-4277
Support Assembly

151804277
205-1600-15-101: RNCC: 3 | RNVC: 2
(241)A0126205-1600-15-101: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-078-0840
Morsetto

150780840
TM01-63-102: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-156-3433
Rotella Orientabile

151563433
(241)A3610NDK 200/GX: RNCC: 3 | RNVC: 2
NDK 200/GX: RNCC: 3 | RNVC: 2

30 Jan 2003

5340-15-203-5077
Rod Assy

152035077
233A1003-411: RNCC: 3 | RNVC: 2
(241)A0019233A1003-411: RNCC: 5 | RNVC: 2

12 Feb 2008

5340-15-119-3640
Parte Sinistra Cern

151193640
26276-102A02: RNCC: 3 | RNVC: 2
26276-102A2: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-15-149-6155
Support

151496155
518-38-1610: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-066-1299
Plate

150661299
P-883010-001: RNCC: 3 | RNVC: 2
P883010-001: RNCC: 5 | RNVC: 2

10 Feb 1986

Load More Results