What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 7 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 7 of 72

5340-15-179-2004
Detent Plunger

151792004
R250-05: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-114-7243
Spring Tension Clip

151147243
03-619-B-65: RNCC: 1 | RNVC: 3
53882: RNCC: 3 | RNVC: 2
(7001)5340151147243: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-15-112-8004
Angle Bracket

151128004
377A1228-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-005-4566
Handle Grip

150054566
1137-09-162: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-102-1667
Mending Plate

151021667
8243.02.11: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-116-4768
Butt Hinge Leaf

151164768
60165667: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-009-2511
Angle Bracket

150092511
P-882609-001: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-15-193-9961
Rod End Clevis

151939961
109-0360-05-1: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-057-2925
Rod End Connector

150572925
1127-07-414: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-060-9339
Bow Handle

150609339
F452C1A-54: RNCC: 3 | RNVC: 2
F452C1A-54: RNCC: 5 | RNVC: 2

15 Jan 1985

5340-15-065-9672
Retaining Strap

150659672
1376-18-650: RNCC: 3 | RNVC: 2
137618650: RNCC: 5 | RNVC: 2

5 Apr 1994

5340-15-109-3892
Mending Plate

151093892
5137-014-18: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-157-9108
Angle Bracket

151579108
0-151713: RNCC: 3 | RNVC: 2
00151713: RNCC: 3 | RNVC: 2
(241)A39630-151713: RNCC: 5 | RNVC: 2
1PA39630-151713: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-009-9838
Rod End Clevis

150099838
1236-06-142: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-15-109-2006
Angle Bracket

151092006
60130152: RNCC: 3 | RNVC: 2

23 Feb 1989

5340-15-181-0165
Loop Clamp

151810165
J28040670-001: RNCC: 3 | RNVC: 2

25 Sep 2008

5340-15-109-1184
Expansion Plug

151091184
14328101: RNCC: 3 | RNVC: 2
1-43281-01: RNCC: 3 | RNVC: 2
A080008-007: RNCC: 5 | RNVC: 2

30 Apr 1988

5340-15-155-0469
Angle Bracket

151550469
J92440225-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-157-9104
Mending Plate

151579104
0-150605: RNCC: 3 | RNVC: 2
(241)A39630-150605: RNCC: 5 | RNVC: 2
1PA39630-150605: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-110-0303
Retaining Strap

151100303
20436-102: RNCC: 3 | RNVC: 2

12 Mar 1990

5340-15-117-8515
Angle Bracket

151178515
SF260-16-426-03: RNCC: 3 | RNVC: 2
SF260-16-426-03: RNCC: 5 | RNVC: 9

28 Jan 1994

5340-15-045-4686
Loop Clamp

150454686
N0R2-505-06-37B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-008-1671
Screw Thread Insert

150081671
A04-10095-166: RNCC: 5 | RNVC: 2
A04-10095-166: RNCC: 5 | RNVC: 9
A04-10095-166: RNCC: 5 | RNVC: 9

10 May 1981

5340-15-192-9685
Retaining Band

151929685
L6589/1206: RNCC: 1 | RNVC: 2
(241)A0302L6589/1206: RNCC: 3 | RNVC: 2

30 Mar 2010

5340-15-113-7314
Mounting Plate

151137314
1376-19-301: RNCC: 3 | RNVC: 2
137619301: RNCC: 5 | RNVC: 2

2 Jul 2001

5340-15-153-3926
Mending Plate

151533926
5137-328-03: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-109-2587
Loop Clamp

151092587
369-09008-105: RNCC: 3 | RNVC: 2

6 Nov 1989

5340-15-120-5783
Mounting Bracket

151205783
75674F91: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-100-2673
Bail Handle

151002673
69588-101: RNCC: 3 | RNVC: 2

16 Dec 1986

5340-15-151-5152
Loop Clamp

151515152
0-118163: RNCC: 3 | RNVC: 2
75786711: RNCC: 3 | RNVC: 2
(241)A39630-118163: RNCC: 5 | RNVC: 2

1 Jun 2000

5340-15-187-5706
Friction Catch

151875706
TAK-0143/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-113-3827
Loop Clamp

151133827
129-0320-25-101: RNCC: 3 | RNVC: 2

14 Dec 1989

5340-15-145-2552
Access Cover

151452552
541-16-0220: RNCC: 3 | RNVC: 2

23 Jun 1997

5340-15-204-6951
Block Clamp

152046951
109-0515-58-4: RNCC: 3 | RNVC: 2

13 Dec 2011

5340-15-045-2363
Screw Thread Insert

150452363
3251-06: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-152-5772
Mounting Bracket

151525772
FG140-36-05: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-15-150-5893
Butt Hinge

151505893
A35791-01-20: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-203-1552
Latch Bar

152031552
212-1300-97-102: RNCC: 3 | RNVC: 2

27 Nov 2007

5340-15-005-7005
Butt Hinge Leaf

150057005
A1-16205-003: RNCC: 3 | RNVC: 2
A1-16205-003: RNCC: 5 | RNVC: 9

10 Apr 1979

5340-15-202-4583
Access Cover

152024583
928-0523/01: RNCC: 3 | RNVC: 2
(241)A4582928-0523/01: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-15-147-7822
Mounting Bracket

151477822
K621-13-47: RNCC: 3 | RNVC: 2

10 Apr 1998

5340-15-207-6328
Caster Wheel

152076328
2996: RNCC: 3 | RNVC: 2
(241)A23091N101012614: RNCC: 5 | RNVC: 2
1N101012614: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-059-3538
Retaining Strap

150593538
1127-36-225: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-059-4951
Mending Plate

150594951
114GS224-1001: RNCC: 3 | RNVC: 2

9 Jul 1975

5340-15-188-8896
Buckle

151888896
EV-99103041: RNCC: 3 | RNVC: 2
(241)A4517EV-99103041: RNCC: 5 | RNVC: 2

2 Dec 2009

5340-15-109-5065
Expansion Plug

151095065
14328901: RNCC: 3 | RNVC: 2
A040015-014: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-105-4417
Handle Grip

151054417
422-6550-07: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-089-5819
Butt Hinge

150895819
16940-075: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-188-0292
Mounting Bracket

151880292
CPM500-09-J2-STLC: RNCC: 3 | RNVC: 2
(241)AFA41CPM500-09-J2-STLC: RNCC: 5 | RNVC: 2

19 Jun 2009

5340-15-009-7129
Angle Bracket

150097129
1236-20-120: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-057-2815
Screw Thread Insert

150572815
1276-12-170: RNCC: 3 | RNVC: 2
127612170: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-178-1346
Bow Handle

151781346
236-104: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-15-116-8959
Plain Solid Disk

151168959
DPR 23434-93: RNCC: 3 | RNVC: 2

23 Nov 1993

5340-15-001-0406
Mounting Bracket

150010406
219AE3169-132: RNCC: 3 | RNVC: 2

21 May 2013

5340-15-153-2820
Loop Clamp

151532820
CFG1-80/12: RNCC: 2 | RNVC: 3
162530216: RNCC: 5 | RNVC: 3

12 Dec 2000

5340-15-009-1891
Rod End Clevis

150091891
109-0110-28-3: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-155-0501
Angle Bracket

151550501
J28040649-001: RNCC: 3 | RNVC: 2

9 Jan 2002

5340-15-007-5021
Butt Hinge Leaf

150075021
1239-01-136: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-061-4697
Clip Retainer Plate

150614697
P-135236-001: RNCC: 3 | RNVC: 2
P135236-001: RNCC: 5 | RNVC: 2

26 Jan 1978

5340-15-073-5271
Flush Lock

150735271
75-70X73: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-100-0132
Retaining Strap

151000132
29162-001: RNCC: 3 | RNVC: 2

1 Oct 1986

5340-15-187-5969
Access Cover

151875969
500422915 LEFT: RNCC: 3 | RNVC: 2

14 Apr 2009

5340-15-113-2792
Retaining Strap

151132792
08227-101A1: RNCC: 3 | RNVC: 2

30 May 1991

5340-15-009-7406
Lock-Release Lever

150097406
1236-09-107: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-041-2650
Angle Bracket

150412650
2-2835-100-24564-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-3347
Retaining Strap

151183347
60145116: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-144-2689
Retaining Band

151442689
TA236: RNCC: 3 | RNVC: 2
93302106: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-007-8978
Expansion Plug

150078978
1-42829-70: RNCC: 3 | RNVC: 2
14282970: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-107-2738
Rod End Clevis

151072738
1181CGB50-214-11: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-177-4243
Bridge Clamp

151774243
048722: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-179-6934
Mounting Bracket

151796934
0000500410748: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-180-3870
Mounting Bracket

151803870
500339745: RNCC: 3 | RNVC: 2
(241)A4249500339745: RNCC: 5 | RNVC: 2

7 May 2008

5340-15-120-9879
Butt Hinge

151209879
000230140: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-120-2641
Expansion Plug

151202641
17883387: RNCC: 3 | RNVC: 2
(241)A424917883387: RNCC: 5 | RNVC: 2

9 Mar 1995

5340-15-122-0549
Mounting Bracket

151220549
98482778: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-199-5399
Rim Lock Set

151995399
ART.4031-SX: RNCC: 3 | RNVC: 2

17 Apr 2005

5340-15-200-3043
Stand Base

152003043
190514168: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-15-003-1400
Mounting Bracket

150031400
5949792026: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-195-6055
Mounting Bracket

151956055
A8190110: RNCC: 3 | RNVC: 2
(241)A9217A8190110: RNCC: 5 | RNVC: 2

8 Apr 2011

5340-15-108-7072
Loop Clamp

151087072
12177190: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-122-2731
Loop Clamp

151222731
800049642: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-163-3496
Loop Clamp

151633496
12173690: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-189-2419
Loop Clamp

151892419
0000004839513: RNCC: 3 | RNVC: 2
4839513: RNCC: 3 | RNVC: 2

10 Feb 2010

5340-15-059-2870
Catch Strike

150592870
260-13-15-11: RNCC: 3 | RNVC: 2
260-13-15-11: RNCC: 5 | RNVC: 9

18 Nov 1975

5340-15-179-8983
Section Block Clamp

151798983
D1404495: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-009-1393
Angle Bracket

150091393
1397591: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-186-7942
Handwheel

151867942
6112030: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-112-6287
Mending Plate

151126287
1376-29-220: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-206-1004
Expansion Plug

152061004
F5000046: RNCC: 3 | RNVC: 2
(241)AJ811F5000046: RNCC: 5 | RNVC: 2

21 May 2012

5340-15-205-2654
Mounting Bracket

152052654
500414216: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-198-4265
Access Cover

151984265
162522033: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-009-6741
Angle Bracket

150096741
159278P1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-118-3656
Mending Plate

151183656
60142367: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-118-4422
Angle Bracket

151184422
60153528: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-198-8011
Support Hook

151988011
500303964: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-116-6311
Protection Bellows

151166311
ADN100: RNCC: 3 | RNVC: 2

25 Oct 1993

5340-15-060-7018
Mending Plate

150607018
P36HC38: RNCC: 5 | RNVC: 2
P36HC38: RNCC: 5 | RNVC: 9

12 Sep 1977

5340-15-152-7428
Loop Clamp

151527428
21612038A: RNCC: 3 | RNVC: 2
3161G2038A: RNCC: 5 | RNVC: 2

20 Oct 2000

5340-15-001-7908
Mounting Bracket

150017908
5949789945: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-001-7943
Mounting Bracket

150017943
5949784266: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-202-3570
Loop Clamp

152023570
17765494: RNCC: 3 | RNVC: 2
(241)A424917765494: RNCC: 5 | RNVC: 2

28 Feb 2007

5340-15-152-7915
Mounting Bracket

151527915
P131402: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-180-0763
Detent Plunger

151800763
190SPK2: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-000-0633
Retaining Strap

150000633
182718623: RNCC: 3 | RNVC: 2

23 Jan 2013

5340-15-132-0299
Angle Bracket

151320299
995102: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-117-4747
Access Cover

151174747
MC414.26E: RNCC: 3 | RNVC: 2

30 May 1994

5340-15-117-0620
Access Cover

151170620
539705: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-068-1524
Angle Bracket

150681524
MC013605: RNCC: 3 | RNVC: 2

1 Jul 1989

5340-15-149-3103
Angle Bracket

151493103
4885701: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-178-7300
Access Cover

151787300
391-1637/01.01: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-153-0036
Loop Clamp

151530036
206285: RNCC: 3 | RNVC: 2

14 Nov 2000

5340-15-116-4819
Angle Bracket

151164819
60151119: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-180-0337
Loop Clamp

151800337
79090242: RNCC: 3 | RNVC: 2

16 Nov 2007

5340-15-102-6298
Loop Clamp

151026298
23566: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-15-195-8930
Access Cover

151958930
A9066800008: RNCC: 3 | RNVC: 2
(241)AJ611A9066800008: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-089-5023
Retaining Strap

150895023
72-052-510: RNCC: 3 | RNVC: 2
72-052-510: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-063-7378
Plug Button

150637378
40.50.01.369: RNCC: 3 | RNVC: 2
93.18.02.20: RNCC: 5 | RNVC: 2

30 May 1983

5340-15-007-2218
Retaining Strap

150072218
1397862: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-103-1356
Mending Plate

151031356
DE013.12.997: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-109-3078
Expansion Plug

151093078
4251629: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-198-2796
Mounting Plate

151982796
M794187: RNCC: 3 | RNVC: 2

14 Sep 2004

5340-15-058-9797
Handle Grip

150589797
1127-42-837: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-117-9803
Rod End Connector

151179803
DOR0113344: RNCC: 3 | RNVC: 2

2 Nov 1994

5340-15-118-2021
Angle Bracket

151182021
60138272: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-007-2530
Angle Bracket

150072530
1374409: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-119-1958
Mending Plate

151191958
75222022: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-150-6263
Mounting Plate

151506263
S7258-W6020-U1: RNCC: 3 | RNVC: 2

15 Dec 1999

5340-15-162-0498
Access Cover

151620498
ECS31LB2: RNCC: 3 | RNVC: 2

5 Dec 2000

5340-15-119-7874
Pipe Hanger

151197874
75206883: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-199-1564
Handle Grip

151991564
76028217: RNCC: 3 | RNVC: 2
(241)AE19276028217: RNCC: 5 | RNVC: 2
76028217: RNCC: 5 | RNVC: 2

23 Jan 2005

5340-15-195-8874
Access Cover

151958874
81437180043: RNCC: 3 | RNVC: 2
(241)AJ61181437180043: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-118-3853
Mending Plate

151183853
60166240: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-003-9039
Mounting Plate

150039039
182734121: RNCC: 3 | RNVC: 2
(241)A0199182734121: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-007-2171
Angle Bracket

150072171
1391114: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-153-9591
Loop Clamp

151539591
230024038: RNCC: 3 | RNVC: 2
M40/60UNI9209ACCIAIO-ZN: RNCC: 5 | RNVC: 2

12 Mar 2001

5340-15-120-0844
Angle Bracket

151200844
60164962: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-119-5691
Access Cover

151195691
4881211: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-151-4595
Bow Handle

151514595
UOXM0370000: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-116-4849
Clamping Catch

151164849
60149348: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-181-1955
Mounting Bracket

151811955
143792-A: RNCC: 3 | RNVC: 2

12 Nov 2008

5340-15-196-2011
Rim Lock Set

151962011
PN UAS 00002137: RNCC: 3 | RNVC: 2
5340F76012841: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-009-0723
Loop Clamp

150090723
591653: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-119-7852
Pipe Hanger

151197852
73155556: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-179-4759
Angle Bracket

151794759
098160758: RNCC: 3 | RNVC: 2

22 Jan 2007

5340-15-007-2210
Angle Bracket

150072210
1397414: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-177-3720
Mounting Plate

151773720
024848: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-103-0714
Angle Bracket

151030714
DE013.13.151: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-109-7208
Retaining Strap

151097208
60142094: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-206-3343
Mounting Plate

152063343
4172393: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-178-7494
Retaining Strap

151787494
027135: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-100-6836
Rod End Connector

151006836
W000776: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-179-9574
Mounting Plate

151799574
0000098196156: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-179-7050
Angle Bracket

151797050
0000500401229: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-163-3875
Angle Bracket

151633875
9467508: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-158-6048
Access Cover

151586048
122606031: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-148-6429
Mending Plate

151486429
190513156: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-061-4894
Retaining Strap

150614894
L5A3: RNCC: 5 | RNVC: 2
L5A3: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-148-9085
Angle Bracket

151489085
4822914: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-15-178-9424
Mounting Bracket

151789424
TN061MD004AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-119-1227
Access Cover

151191227
73115949: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-005-3628
Angle Bracket

150053628
1385366: RNCC: 3 | RNVC: 2
1385366: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-116-4746
Butt Hinge Leaf

151164746
60166446: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-178-3701
Mechanical Stop

151783701
271434015: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-160-5514
Coat And Hat Hook

151605514
C902486911: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-118-9098
Loop Clamp

151189098
70628656: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-200-1937
Screw Thread Insert

152001937
210009156: RNCC: 3 | RNVC: 2
(241)A0199210009156: RNCC: 5 | RNVC: 2

24 Oct 2005

5340-15-007-1372
Mounting Bracket

150071372
3.557.0190: RNCC: 3 | RNVC: 2

7 Jan 2014

5340-15-118-3883
Strap Hinge

151183883
60165223: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-005-1038
Mending Plate

150051038
1127-02-144: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-054-8969
Plain Solid Disk

150548969
85A101-1: RNCC: 5 | RNVC: 2
85A101-1: RNCC: 5 | RNVC: 9

22 Jun 1989

5340-15-170-9013
Loop Clamp

151709013
71420321: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-153-6878
Loop Clamp

151536878
142068030: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-060-8558
Mending Plate

150608558
F403B4-1: RNCC: 3 | RNVC: 2

29 Jun 1977

5340-15-001-5843
Butt Hinge

150015843
42566650: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-202-5888
Loop Clamp

152025888
EN4113F32WH: RNCC: 3 | RNVC: 2

17 May 2007

5340-15-108-6323
Loop Clamp

151086323
60137541: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-062-3693
Angle Bracket

150623693
012124 D: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-199-9632
Loop Clamp

151999632
93158796: RNCC: 3 | RNVC: 2

28 Jul 2005

5340-15-118-3399
Loop Clamp

151183399
60142391: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-057-5805
Loop Clamp

150575805
STAND987: RNCC: 3 | RNVC: 2
STAND987: RNCC: 5 | RNVC: 9

6 Dec 1972

5340-15-120-3527
Loop Clamp

151203527
10448790: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-152-3827
Plain Solid Disk

151523827
4130302255: RNCC: 3 | RNVC: 2
4130302255: RNCC: 5 | RNVC: 2
0-115553: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-118-2644
Loop Clamp

151182644
D1407324: RNCC: 3 | RNVC: 2

11 Apr 1995

5340-15-203-0182
Loop Clamp

152030182
14-922002112: RNCC: 3 | RNVC: 2

13 Nov 2007

5340-15-100-1729
Loop Clamp

151001729
2352000015: RNCC: 3 | RNVC: 2

23 May 1994

5340-15-112-9365
Loop Clamp

151129365
31610015A: RNCC: 3 | RNVC: 2

11 Apr 1994

5340-15-180-1586
Loop Clamp

151801586
4150015: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-153-5264
Filler Opening Cap

151535264
ICF 32: RNCC: 3 | RNVC: 2
442000000/72/11: RNCC: 5 | RNVC: 2

7 Feb 2001

5340-15-066-0554
Shimmy Damper

150660554
25.15 12MA: RNCC: 3 | RNVC: 2

7 Nov 1985

5340-15-180-9216
Mounting Bracket

151809216
025018040: RNCC: 3 | RNVC: 2
(241)A5009025018040: RNCC: 5 | RNVC: 2

8 Aug 2008

5340-15-214-4000
Key Holder

152144000
ART2300: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-170-7199
Corner Brace

151707199
9265.140: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-178-2405
Mounting Plate

151782405
0038551580: RNCC: 3 | RNVC: 2
3855.158: RNCC: 5 | RNVC: 2

11 Mar 2005

5340-15-147-3661
Access Cover

151473661
999-0500-44-263: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-057-2651
Retaining Strap

150572651
1376-18-378: RNCC: 3 | RNVC: 2
137618378: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-121-3310
Mounting Plate

151213310
463-223550.002: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-155-9263
Loop Clamp

151559263
18088291: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-15-178-6502
Mounting Plate

151786502
2231.069.0003: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-170-6696
Mounting Bracket

151706696
71-201418: RNCC: 3 | RNVC: 2

5 May 2003

5340-15-116-7735
Vent Plug

151167735
FF-0117: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-15-045-3852
Loop Clamp

150453852
785-21-34: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-113-4843
Rod End Clevis

151134843
277A1890-005: RNCC: 3 | RNVC: 2

29 Jun 1991

5340-15-111-7989
Angle Bracket

151117989
031330/4: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-120-2739
Angle Bracket

151202739
42047954: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-163-3775
Mounting Plate

151633775
9436771: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-199-2027
Retaining Band

151992027
1350044: RNCC: 3 | RNVC: 2
(241)AE9161350044: RNCC: 5 | RNVC: 2

6 Feb 2005

5340-15-178-7676
Mounting Bracket

151787676
040096: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-109-4805
Mending Plate

151094805
1P 538847: RNCC: 3 | RNVC: 2
1P 538847: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-187-1995
Strap Hinge

151871995
SC 100 622: RNCC: 3 | RNVC: 2
(241)A3980SC100622: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-187-2009
Mounting Bracket

151872009
SC 100 636: RNCC: 3 | RNVC: 2
(241)A3980SC100636: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-060-1578
Access Cover

150601578
1376-19-278: RNCC: 3 | RNVC: 2
137619278: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-118-6949
Bow Handle

151186949
73137225: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-195-8146
Mounting Bracket

151958146
341472: RNCC: 3 | RNVC: 2
(241)AJ611341472: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-062-9012
Retaining Strap

150629012
0-30334: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-187-8212
Mounting Bracket

151878212
018.066.00.46: RNCC: 3 | RNVC: 2
(241)A6479018.066.00.46: RNCC: 5 | RNVC: 2
018.066.00.46: RNCC: 5 | RNVC: 2

7 May 2009

5340-15-020-1814
Angle Bracket

150201814
01-231H116D: RNCC: 3 | RNVC: 2
55.25.061.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-122-2430
Loop Clamp

151222430
80A037906: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-162-6318
Access Cover

151626318
MPS14-DCC: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-15-162-4104
Plug Button

151624104
9000.110: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-152-8002
Support Hook

151528002
P300104: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-151-1435
Mounting Bracket

151511435
380-2389/01: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-15-045-3116
Rod End Clevis

150453116
503-20-33: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-2536
Mending Plate

151072536
5054-06: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-111-8000
Angle Bracket

151118000
31110/19: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-147-3650
Access Cover

151473650
109-0731-41-105: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-119-1240
Angle Bracket

151191240
73121266: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-118-3619
Angle Bracket

151183619
60141080: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-109-3088
Expansion Plug

151093088
60110079: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-109-5056
Bow Handle

151095056
60144400: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-103-2591
Screw Thread Insert

151032591
50745: RNCC: 3 | RNVC: 2

30 Nov 1986

5340-15-201-0596
Angle Bracket

152010596
A387A1150A: RNCC: 3 | RNVC: 2
(241)A0126A387A1150A: RNCC: 5 | RNVC: 2

16 May 2006

5340-15-187-9746
Tee Hinge

151879746
070822750A: RNCC: 3 | RNVC: 2
7783 01: RNCC: 5 | RNVC: 2

15 Jun 2009

5340-15-109-2706
Loop Clamp

151092706
0-102897: RNCC: 3 | RNVC: 2
1PA39630-102897: RNCC: 5 | RNVC: 2

8 Mar 1988

5340-15-059-3580
Retaining Strap

150593580
1127-40-324: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-045-3917
Webbing Strap

150453917
N0R4-109-00-12: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-115-3526
Retaining Strap

151153526
538-16-1490: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-105-2828
Screw Thread Insert

151052828
D75186-2: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-177-4329
Mounting Bracket

151774329
051112: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-194-4024
Pipe Hanger

151944024
71416090: RNCC: 3 | RNVC: 2
71416090: RNCC: 5 | RNVC: 2

5 Nov 2010

5340-15-101-8943
Retaining Strap

151018943
1P575533: RNCC: 3 | RNVC: 2
1P575533: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-179-7359
Loop Clamp

151797359
17315699: RNCC: 3 | RNVC: 2
(241)A424917315699: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-060-7525
Expansion Plug

150607525
16UNI1663C7-3145CDCR: RNCC: 2 | RNVC: 2
2308-23-305: RNCC: 5 | RNVC: 2
230823305: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-199-7340
Bail Handle

151997340
141-6207/01: RNCC: 3 | RNVC: 2
(241)A0069141-6207/01: RNCC: 5 | RNVC: 2

22 May 2005

5340-15-009-2226
Plug Button

150092226
895-070-550-4: RNCC: 3 | RNVC: 2
8950705504: RNCC: 5 | RNVC: 2
9932462: RNCC: 5 | RNVC: 2

22 Sep 1981

5340-15-041-1421
Angle Bracket

150411421
2-4751-101-24091-6: RNCC: 3 | RNVC: 2
2-4751-1-01-24091-6: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-103-2679
Loop Clamp

151032679
5142-218-00: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-3497
Access Cover

151153497
538-05-1070: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-143-2831
Bail Handle

151432831
27811: RNCC: 3 | RNVC: 2
IR.302/90 INOX: RNCC: 3 | RNVC: 2
27811: RNCC: 5 | RNVC: 2
1112948E00: RNCC: 5 | RNVC: 2

10 Dec 1996

5340-15-062-4758
Access Door Hinge

150624758
109-0503-19-1: RNCC: 3 | RNVC: 2

29 Apr 1982

5340-15-101-3360
Butt Hinge Leaf

151013360
B3400-48A: RNCC: 3 | RNVC: 2

1 Dec 1987

5340-15-122-3356
Handle Grip

151223356
232A2030-003: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-112-8028
Rod End Clevis

151128028
244A1753-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-003-9122
Mounting Plate

150039122
182741326: RNCC: 3 | RNVC: 2
(241)A0199182741326: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-148-7249
Loop Clamp

151487249
8591167: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-180-8537
Loop Clamp

151808537
EN4113F28WH: RNCC: 3 | RNVC: 2

29 Jul 2008

5340-15-107-2314
Retaining Strap

151072314
23070-101: RNCC: 3 | RNVC: 2

12 Jan 1988

5340-15-202-4453
Luggage Lock

152024453
1300/4: RNCC: 3 | RNVC: 2
(241)A52001300/4: RNCC: 5 | RNVC: 2

25 Mar 2007

5340-15-066-0723
Retaining Strap

150660723
5989463: RNCC: 3 | RNVC: 2
5989463: RNCC: 5 | RNVC: 9

8 May 1985

5340-15-205-2583
Rod End Connector

152052583
504236174: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-178-9426
Mounting Bracket

151789426
TN061MD003AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-060-5686
Mending Plate

150605686
27239-101: RNCC: 3 | RNVC: 2

1 Jun 1977

5340-15-109-1111
Mending Plate

151091111
11604A05-02: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-051-7993
Loop Clamp

150517993
1-02906-90: RNCC: 3 | RNVC: 2
10290690: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-147-3476
Access Cover

151473476
291C01119-103: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-045-0330
Screw Thread Insert

150450330
1900-08: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-178-4680
Angle Bracket

151784680
DYA075: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-194-1983
Mounting Bracket

151941983
036617: RNCC: 3 | RNVC: 2
36617: RNCC: 5 | RNVC: 2
036617: RNCC: 5 | RNVC: 2

4 Oct 2010

5340-15-153-5262
Filler Opening Cap

151535262
442000000/72/09: RNCC: 3 | RNVC: 2
ICF 27: RNCC: 5 | RNVC: 2

7 Feb 2001

5340-15-179-9582
Mounting Plate

151799582
0000500407185: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-108-7065
Catch Strike

151087065
1395449: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-064-9322
Hand Crank

150649322
1127-21-032: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-040-8217
Angle Bracket

150408217
1-3189-1-00-1-25606-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-063-9905
Mending Plate

150639905
71-06815: RNCC: 3 | RNVC: 2

7 Oct 1983

5340-15-232-2959
Angle Bracket

152322959
77005140: RNCC: 3 | RNVC: 2
(241)A500977005140: RNCC: 5 | RNVC: 2
534015E138577: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-155-2902
Protection Bellows

151552902
60177891: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-118-4524
Rod End Connector

151184524
60151343: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-118-7015
Access Cover

151187015
73128786: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-073-5228
Rim Lock

150735228
39B55X24: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-052-7104
Retaining Strap

150527104
708086A: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-118-4011
Angle Bracket

151184011
60159865: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-109-1845
Angle Bracket

151091845
1373002: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-178-7438
Mounting Bracket

151787438
027597: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-153-2729
Butt Hinge

151532729
122644272: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-119-0089
Tubular Fairlead

151190089
70061508: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-188-1864
Filler Opening Cap

151881864
4895202: RNCC: 3 | RNVC: 2

27 Jul 2009

5340-15-049-5296
Handle Grip

150495296
011-1899: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-5539
Flush Catch

150075539
N130000200: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-179-6876
Angle Bracket

151796876
0000500400593: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-007-0180
Clamp Bolt Assembly

150070180
020202880000: RNCC: 5 | RNVC: 2
020202880000: RNCC: 5 | RNVC: 9

8 Jan 1982

5340-15-157-4989
Hand Crank

151574989
20EQ069: RNCC: 3 | RNVC: 2
(241)A166720EQ069: RNCC: 5 | RNVC: 2

5 Sep 2003

5340-15-207-8773
Bow Handle

152078773
79093824: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-068-0548
Access Cover

150680548
VK50X10.20: RNCC: 3 | RNVC: 2

7 Feb 1986

5340-15-122-2695
Mounting Plate

151222695
800046393: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-195-9438
Access Cover

151959438
04031088: RNCC: 3 | RNVC: 2
62800270: RNCC: 5 | RNVC: 2
IMT00064: RNCC: 5 | RNVC: 2

30 May 2011

5340-15-151-9431
Angle Bracket

151519431
0-174278: RNCC: 3 | RNVC: 2
00174278: RNCC: 3 | RNVC: 2
1PA39630-174278: RNCC: 5 | RNVC: 2
(241)A39630-174278: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-001-8259
Mounting Bracket

150018259
5949783646: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-003-7996
Mounting Bracket

150037996
DISPMONTGEHACTX600: RNCC: 3 | RNVC: 2
(241)A8170DISPMONTGEHACTX600: RNCC: 5 | RNVC: 2

27 Nov 2013

5340-15-152-6603
Mounting Bracket

151526603
01.01.223.45: RNCC: 3 | RNVC: 2

10 Oct 2000

5340-15-008-0702
Angle Bracket

150080702
60112924: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-162-2408
Mounting Plate

151622408
12101059: RNCC: 3 | RNVC: 2
E1682109: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-007-9701
Mending Plate

150079701
60104230: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-145-0193
Screw Thread Insert

151450193
01300080008: RNCC: 3 | RNVC: 2
214606303: RNCC: 5 | RNVC: 2

12 May 1997

5340-15-147-4159
Mending Plate

151474159
3210004700: RNCC: 3 | RNVC: 2

18 Nov 1997

5340-15-145-0343
Mounting Bracket

151450343
541-01-1630: RNCC: 3 | RNVC: 2

28 Mar 1997

5340-15-151-4237
Loop Clamp

151514237
0-121961: RNCC: 3 | RNVC: 2
(241)A39630-121961: RNCC: 5 | RNVC: 2

24 May 2000

5340-15-064-0604
Angle Bracket

150640604
6011300: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-169-3194
Angle Bracket

151693194
F72010557: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-179-7031
Mounting Plate

151797031
00185319: RNCC: 3 | RNVC: 2
98185319: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-179-9377
Angle Bracket

151799377
2520060: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-177-4300
Mounting Plate

151774300
050473: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-008-1814
Retaining Band

150081814
60114304: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-052-0374
Loop Clamp

150520374
N0R2-505-05-27A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-205-4156
Rim Latch

152054156
2 0196-094: RNCC: 3 | RNVC: 2
(241)S34652 0196-094: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-111-3100
Mending Plate

151113100
60111384: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-193-4375
Control Rod

151934375
504057980: RNCC: 3 | RNVC: 2
(241)A4249504057980: RNCC: 5 | RNVC: 2

13 May 2010

5340-15-109-8751
Angle Bracket

151098751
60117195: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-116-4747
Butt Hinge Leaf

151164747
60166445: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-199-2592
Access Cover

151992592
TAF-5030/01: RNCC: 3 | RNVC: 2
(241)A0069TAF-5030/01: RNCC: 5 | RNVC: 2

23 Feb 2005

5340-15-128-4246
Handle Grip

151284246
12229: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-204-0553
Access Cover

152040553
500300134: RNCC: 3 | RNVC: 2
0059145: RNCC: 5 | RNVC: 2

23 Aug 2011

5340-15-158-6055
Access Cover

151586055
122606341: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-138-5242
Angle Bracket

151385242
7560819: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-151-7848
Angle Bracket

151517848
0-109785: RNCC: 3 | RNVC: 2
(241)A39630-109785: RNCC: 5 | RNVC: 2
1PA39630-109785: RNCC: 5 | RNVC: 2

10 Jul 2000

5340-15-008-4130
Mending Plate

150084130
1236-80-107: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-060-6073
Retaining Strap

150606073
62653-101A1: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-15-065-7280
Angle Bracket

150657280
109-0405-99-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-004-7975
Angle Bracket

150047975
P-110562-001: RNCC: 3 | RNVC: 2
P110562-001: RNCC: 5 | RNVC: 2

18 Jul 1978

5340-15-111-3793
Strap Hinge

151113793
113A6022-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-119-0707
Loop Clamp

151190707
70925617: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-177-4282
Access Cover

151774282
049540: RNCC: 3 | RNVC: 2
U010123: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-063-7697
Rod End Clevis

150637697
79010476: RNCC: 3 | RNVC: 2

31 Mar 1982

5340-15-118-8608
Access Cover

151188608
299709169N: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-103-6838
Loop Clamp

151036838
31610005A: RNCC: 3 | RNVC: 2

13 Oct 1995

5340-15-102-8530
Butt Hinge Leaf

151028530
213A7192-001: RNCC: 3 | RNVC: 2

16 Dec 1988

5340-15-179-9592
Mounting Plate

151799592
109-0312-35-105: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-062-7264
Mending Plate

150627264
1141-31-152: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-111-3792
Strap Hinge

151113792
113A6012-010: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-111-5594
Access Cover

151115594
129-0110-68-101: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-116-2296
Retaining Strap

151162296
190523114: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-15-110-0309
Retaining Strap

151100309
27324-101A00: RNCC: 3 | RNVC: 2
27324-101: RNCC: 5 | RNVC: 2

15 Mar 1990

5340-15-040-1616
Angle Bracket

150401616
1-2551-1-03-27824: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-199-4642
Angle Bracket

151994642
A387A1135A: RNCC: 3 | RNVC: 2
(241)A0126A387A1135A: RNCC: 5 | RNVC: 2

12 Apr 2005

5340-15-120-3428
Bow Handle

151203428
60175994: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-163-3724
Bridge Clamp

151633724
9433793: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-063-3253
Retaining Strap

150633253
60113196: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-199-5216
Spring Tension Clip

151995216
122611590: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-138-3275
Handle Grip

151383275
182247880: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-107-5076
Retaining Band

151075076
7300772: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-108-7602
Angle Bracket

151087602
60141563: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-154-4157
Expansion Plug

151544157
10011109100: RNCC: 3 | RNVC: 2
(241)A977210011109100: RNCC: 5 | RNVC: 2

22 May 2001

5340-15-005-1557
Retaining Strap

150051557
1378683: RNCC: 3 | RNVC: 2
1378683: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-077-4569
Angle Bracket

150774569
K113SV1005: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-004-0544
Butt Hinge Leaf

150040544
1137-19-205: RNCC: 3 | RNVC: 2

30 May 1977

5340-15-202-4548
Tubular Fairlead

152024548
00621: RNCC: 3 | RNVC: 2
(241)A553600621: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-049-5293
Handle Grip

150495293
011-1897: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-9618
Access Cover

151189618
75206727: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-121-8287
Handle Grip

151218287
D0482743: RNCC: 3 | RNVC: 2

15 Nov 1996

5340-15-120-2468
Clamping Catch

151202468
60144936: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-181-2381
Control Rod

151812381
5C262: RNCC: 3 | RNVC: 2
(241)A01785C262: RNCC: 5 | RNVC: 2
C5C262: RNCC: 5 | RNVC: 2

17 Nov 2008

5340-15-009-1991
Bow Handle

150091991
4544136: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-063-3767
Angle Bracket

150633767
60117601: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-189-2000
Handle Grip

151892000
120020063: RNCC: 3 | RNVC: 2
(241)A5009120020063: RNCC: 5 | RNVC: 2

8 Feb 2010

5340-15-003-9077
Mounting Plate

150039077
182741043: RNCC: 3 | RNVC: 2
(241)A0199182741043: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-120-3289
Angle Bracket

151203289
80419: RNCC: 3 | RNVC: 2
8197174: RNCC: 5 | RNVC: 2
80419: RNCC: 5 | RNVC: 9

30 Mar 1995

5340-15-118-7353
Angle Bracket

151187353
73126411: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-205-2597
Vent Plug

152052597
504348650: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-201-2925
Access Cover

152012925
162520224: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-002-8150
Mounting Plate

150028150
5801359993: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-152-1159
Mending Plate

151521159
60156412: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-103-8217
Retaining Strap

151038217
06596-101B2: RNCC: 3 | RNVC: 2

1 Feb 1988

5340-15-148-6484
Mending Plate

151486484
190516298: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-148-1568
Angle Bracket

151481568
60184418: RNCC: 3 | RNVC: 2

25 Jun 1998

5340-15-179-6907
Mounting Plate

151796907
0000500400346: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-120-2492
Angle Bracket

151202492
60162670: RNCC: 3 | RNVC: 2

6 Mar 1995

5340-15-156-0730
Mounting Plate

151560730
807007: RNCC: 3 | RNVC: 2
(241)S7177807007: RNCC: 5 | RNVC: 2

20 Nov 2002

5340-15-151-6753
Angle Bracket

151516753
60188917: RNCC: 3 | RNVC: 2

26 Jun 2000

5340-15-100-7589
Retaining Strap

151007589
000204400400: RNCC: 5 | RNVC: 2
000204400400: RNCC: 5 | RNVC: 9

9 Jul 1986

5340-15-120-6652
Rod End Clevis

151206652
D0466773: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-147-0942
Metal Grille

151470942
269.906.083K: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-109-0857
Retaining Strap

151090857
60102854: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-116-4776
Mending Plate

151164776
60151121: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-179-7083
Mounting Plate

151797083
41033754: RNCC: 3 | RNVC: 2
(241)A424941033754: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-108-6262
Retaining Strap

151086262
14198900: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-008-0703
Angle Bracket

150080703
60112256: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-157-4336
Vent Plug

151574336
20210302A-57: RNCC: 3 | RNVC: 2
FS8: RNCC: 5 | RNVC: 2
FS8: RNCC: 5 | RNVC: 9

14 Jul 2003

5340-15-050-9738
Butt Hinge Leaf

150509738
N83507T19818: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-198-2472
Pipe Hanger

151982472
MT842018: RNCC: 3 | RNVC: 2

9 Sep 2004

5340-15-008-1829
Angle Bracket

150081829
60114527: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-119-7165
Angle Bracket

151197165
60173114: RNCC: 3 | RNVC: 2

8 Nov 1994

5340-15-109-7116
Angle Bracket

151097116
60134571: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-118-7665
Access Cover

151187665
4619671: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-157-3316
Expansion Plug

151573316
D0180022A: RNCC: 3 | RNVC: 2

25 Jun 2003

5340-15-201-9763
Catch Strike

152019763
79114657: RNCC: 3 | RNVC: 2
(241)AD75179114657: RNCC: 5 | RNVC: 2
79114657: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-15-118-7043
Mounting Bracket

151187043
73131022: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-062-9205
Retaining Strap

150629205
0-100377: RNCC: 3 | RNVC: 2

9 Jul 1981

5340-15-060-2705
Screw Thread Insert

150602705
4-02240-1: RNCC: 3 | RNVC: 2

9 Feb 1977

5340-15-181-1757
Loop Clamp

151811757
179005195: RNCC: 3 | RNVC: 2
(241)A0199179005195: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-170-9053
Mounting Plate

151709053
72105611: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-109-0169
Loop Clamp

151090169
60102557: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-153-9590
Loop Clamp

151539590
230023905: RNCC: 3 | RNVC: 2
OX: RNCC: 5 | RNVC: 2

12 Mar 2001

5340-15-178-8874
Bow Handle

151788874
603.058.5: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-15-119-1200
Angle Bracket

151191200
73115802: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-150-6022
Angle Bracket

151506022
106132: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-179-6946
Access Cover

151796946
0000500413677: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-055-9995
Support Hook

150559995
1140: RNCC: 3 | RNVC: 2

7 Dec 1973

5340-15-120-3281
Mending Plate

151203281
92300150237: RNCC: 3 | RNVC: 2
93158889: RNCC: 5 | RNVC: 2

30 Mar 1995

5340-15-009-6599
Screw Thread Insert

150096599
529N1010203: RNCC: 3 | RNVC: 2
529N1010203: RNCC: 5 | RNVC: 9

1 Oct 1980

5340-15-108-4287
Retaining Strap

151084287
4928482: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-152-4874
Access Cover

151524874
60128897: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-203-6504
Mounting Plate

152036504
CARP33579: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-109-5974
Threaded Rod End

151095974
15150011: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-064-4015
Retaining Strap

150644015
4735644: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-234-2597
Recess Handle

152342597
51748735: RNCC: 3 | RNVC: 2
534015E039468: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-066-6238
Cushioning Pad

150666238
62886: RNCC: 2 | RNVC: 2
62886F91: RNCC: 3 | RNVC: 2

24 Feb 1994

5340-15-116-4909
Retaining Strap

151164909
60165163: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-204-8018
Caster Wheel

152048018
D0014135: RNCC: 3 | RNVC: 2
(241)A3917D0014135: RNCC: 5 | RNVC: 2

10 Jan 2012

5340-15-001-1781
Detent Plunger

150011781
504376331: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-15-149-3329
Expansion Plug

151493329
60144319: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-007-2629
Angle Bracket

150072629
1388962: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-9132
Loop Clamp

151189132
70642536: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-178-5521
Mounting Plate

151785521
2231.019.0001: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-118-9139
Mending Plate

151189139
73072895: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-144-9562
Plug Button

151449562
60141211: RNCC: 3 | RNVC: 2

24 Feb 1997

5340-15-063-7435
Mending Plate

150637435
40.50.01.377: RNCC: 3 | RNVC: 2
19.21.38.20: RNCC: 5 | RNVC: 2

30 May 1983

5340-15-206-1005
Flush Lock

152061005
F0100014: RNCC: 3 | RNVC: 2
(241)AJ811F0100014: RNCC: 5 | RNVC: 2

21 May 2012

5340-15-008-1854
Angle Bracket

150081854
60114818: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-105-8406
Retaining Band

151058406
23092: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-117-1952
Angle Bracket

151171952
190516221: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-119-1429
Access Cover

151191429
73125572: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-063-2650
Plug Button

150632650
41822101: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-187-3113
Retaining Band

151873113
UZ195: RNCC: 3 | RNVC: 2
(241)A9410UZ195: RNCC: 5 | RNVC: 2

11 Mar 2009

5340-15-007-2211
Retaining Strap

150072211
1397455: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-066-0389
Retaining Strap

150660389
1127-44-704: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-9408
Access Cover

151189408
73157441: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-158-6034
Rod End Clevis

151586034
122505505: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-102-1475
Mending Plate

151021475
8244.02.10: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-162-9679
Mounting Plate

151629679
6022042: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-15-003-8339
Leather Strap

150038339
001101820010: RNCC: 5 | RNVC: 2
001101820010: RNCC: 5 | RNVC: 9

27 Feb 1985

5340-15-050-8318
Leather Strap

150508318
137510-42: RNCC: 5 | RNVC: 2
137510-42: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-008-5988
Loop Clamp

150085988
1/04184/05: RNCC: 3 | RNVC: 2
10418405: RNCC: 5 | RNVC: 2

27 Mar 1981

5340-15-186-7941
Handwheel

151867941
6113055: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-003-9076
Mounting Plate

150039076
182741042: RNCC: 3 | RNVC: 2
(241)A0199182741042: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-003-7626
Mortise Lock

150037626
8332: RNCC: 3 | RNVC: 2

21 Nov 2013

5340-15-139-3989
Angle Bracket

151393989
4464340: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-065-4246
Retaining Strap

150654246
5989465: RNCC: 3 | RNVC: 2
5989465: RNCC: 5 | RNVC: 9

24 Oct 1983

5340-15-003-4654
Lock-Release Lever

150034654
182707247: RNCC: 3 | RNVC: 2
(241)A0199182707247: RNCC: 5 | RNVC: 2

14 Nov 2013

5340-15-103-1010
Loop Clamp

151031010
DE013.13.608: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-118-8399
Mounting Bracket

151188399
9460490: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-122-0545
Mounting Bracket

151220545
7301156: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-103-0182
Strap Hinge

151030182
79031995: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-001-5865
Rod End Clevis

150015865
42563217: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-177-3104
Caster Wheel

151773104
21358FR: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-179-6849
Angle Bracket

151796849
0000500402266: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-131-4495
Handle Grip

151314495
4604617: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-111-5884
Screw Thread Insert

151115884
CP-8201-030: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-122-3549
Mounting Bracket

151223549
D1409093: RNCC: 3 | RNVC: 2

8 Jun 2000

5340-15-151-6633
Angle Bracket

151516633
42043852: RNCC: 3 | RNVC: 2

22 Jun 2000

5340-15-178-5513
Mounting Plate

151785513
2231.022.0001: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-063-5976
Clamping Catch

150635976
5941048: RNCC: 3 | RNVC: 2
5941048: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-188-8095
Retaining Bail

151888095
93156004: RNCC: 3 | RNVC: 2
(241)AD75193156004: RNCC: 5 | RNVC: 2
93156004: RNCC: 5 | RNVC: 2

19 Nov 2009

5340-15-002-0808
Handle Grip

150020808
2104134: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-117-1960
Mending Plate

151171960
190515163: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-115-6947
Filler Opening Cap

151156947
TSDV2015: RNCC: 3 | RNVC: 2
D0589719: RNCC: 5 | RNVC: 2

8 Mar 1994

5340-15-116-4750
Butt Hinge Leaf

151164750
60166438: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-187-6213
Retaining Clip

151876213
RF/PC: RNCC: 3 | RNVC: 2
(241)AH405RF/PC: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-113-1466
Butt Hinge

151131466
312A6461-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-109-0840
Angle Bracket

151090840
42040118: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-118-0908
Valve Seat

151180908
D0467842: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-152-1484
Angle Bracket

151521484
60170501: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-15-007-2399
Angle Bracket

150072399
1398421: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-118-7040
Angle Bracket

151187040
73131018: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-055-5382
Bow Handle

150555382
1971TAV46: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-059-3722
Retaining Strap

150593722
1127-40-198: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-120-4466
Mending Plate

151204466
132511184: RNCC: 3 | RNVC: 2

25 May 1995

5340-15-118-9434
Mending Plate

151189434
74025079: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-065-4418
Expansion Plug

150654418
563359: RNCC: 3 | RNVC: 2

15 Feb 1984

5340-15-003-7528
Utility Resilient Mount

150037528
00118: RNCC: 3 | RNVC: 2

20 Nov 2013

5340-15-007-2024
Spring Tension Clip

150072024
1390898: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-108-4219
Retaining Strap

151084219
4932050: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-177-4034
Access Cover

151774034
042288: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-001-9626
Handle Grip

150019626
8801442: RNCC: 3 | RNVC: 2
LI1442: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-179-4569
Retaining Ring

151794569
1756-1AA: RNCC: 3 | RNVC: 2

29 Nov 2006

5340-15-162-5499
Compression Cup

151625499
4152461: RNCC: 3 | RNVC: 2

25 Sep 2001

5340-15-045-3922
Loop Clamp

150453922
N0R4-110-10-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-113-0119
Angle Bracket

151130119
37956736200: RNCC: 3 | RNVC: 2
93155432: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-195-2186
Utility Access Door

151952186
209748100: RNCC: 3 | RNVC: 2
209748100: RNCC: 5 | RNVC: 2
CV173682: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-111-7994
Angle Bracket

151117994
MF010229: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-059-2834
Angle Bracket

150592834
260-11-131-11: RNCC: 3 | RNVC: 2
260-11-131-11: RNCC: 5 | RNVC: 9

18 Nov 1975

5340-15-105-8395
Retaining Band

151058395
22077: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-057-8937
Rod End Clevis

150578937
P44HC15: RNCC: 5 | RNVC: 2
P44HC15: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-122-0963
Access Cover

151220963
634625: RNCC: 3 | RNVC: 2
634625: RNCC: 5 | RNVC: 9

30 Apr 1996

5340-15-195-8066
Mounting Plate

151958066
156061: RNCC: 3 | RNVC: 2
(241)AJ611156061: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-150-7879
Mounting Bracket

151507879
00082483: RNCC: 3 | RNVC: 2

24 Jan 2000

5340-15-007-1876
Rod End Clevis

150071876
1373283: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-116-6527
Rod End Clevis

151166527
312A5533-001: RNCC: 3 | RNVC: 2

9 Jun 1993

5340-15-001-3366
Retaining Band

150013366
504380830: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-107-2841
Mending Plate

151072841
72265F01: RNCC: 3 | RNVC: 2
72365: RNCC: 3 | RNVC: 2

2 Nov 1993

5340-15-111-8001
Angle Bracket

151118001
031330/8: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-074-3967
Retaining Strap

150743967
5UNI2135CD: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-198-8796
Angle Bracket

151988796
N635G2143201: RNCC: 3 | RNVC: 2
(241)A0126N635G2143201: RNCC: 5 | RNVC: 2

24 Nov 2004

Load More Results