What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 69 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 69 of 72

5340-15-122-5568
Righ Panel

151225568
01TL21026-01: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-149-0795
Supporto Sensore S1

151490795
20645-29-004: RNCC: 3 | RNVC: 2
20645-29-004: RNCC: 5 | RNVC: 9

23 Nov 1998

5340-15-169-4700
Lucchetto C.

151694700
F72012982: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-110-2025
Dispositivodiprotez

151102025
102387-1: RNCC: 3 | RNVC: 2
102387-1: RNCC: 5 | RNVC: 9

4 Sep 1990

5340-15-151-6950
Mensola

151516950
0-178085: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-212-5411
Kit Bulloneria In G

152125411
4COEELDKIT50B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-061-8166
Fascetta Speciale

150618166
0-102222: RNCC: 3 | RNVC: 2

30 Nov 1982

5340-15-110-2887
Bracket Fue

151102887
P120081-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-110-2880
Bracket Fue

151102880
P120078-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-187-1239
Manual Control Lever

151871239
997-400-10610 ITEM 41: RNCC: 3 | RNVC: 2
500-009-00135: RNCC: 3 | RNVC: 2

19 Feb 2009

5340-15-000-5498
Blocki Caster Wheel

150005498
13HJ04643228S01-801-044: RNCC: 3 | RNVC: 2
(241)A001913HJ04643228S01-801-04: RNCC: 5 | RNVC: 2

15 Mar 2013

5340-15-016-9920

5340-15-117-5905
Corrosion Preventive Anode

151175905
78/2B/5/4: RNCC: 3 | RNVC: 2

4 Nov 1994

5340-15-215-2993
Avvolgicavo

152152993
ABC E1068/1-25: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-114-7671
Bushing Ins

151147671
X446C19-02: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-116-7825
Sostegno Per Suppor

151167825
8106C/54: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-15-180-4285
Rwr Unit Protection

151804285
212-1135-45-101: RNCC: 3 | RNVC: 2
(241)A0126212-1135-45-101: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-120-7571
Forcella Testa Di T

151207571
1CW026890: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-170-8112
Spira Di Accoppiame

151708112
340-0727/17: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-186-8798
Mounting

151868798
206-011-102-121: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-136-2630
Staffa

151362630
4639499: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-005-6526
Coperchio Speciale

150056526
0-33602: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-219-9113
Tassello Nylon Hx P

152199113
HDR5560025: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-6020
Staffa A Gomito

151056020
23991: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-148-6626
Stand Base (1)

151486626
190540132: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-179-0026
Support

151790026
RS 412 125 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-000-7229
Lock-Release Lever

150007229
BRP-0337019: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-148-9748
Az Handwheel

151489748
F01A02802P01: RNCC: 3 | RNVC: 2
600-4031-079: RNCC: 5 | RNVC: 2

9 Nov 1998

5340-15-116-6709
Helical Compression Spring Retainer

151166709
04-0310-046: RNCC: 3 | RNVC: 2

24 Feb 1994

5340-15-121-5300
Staffa Supporto Mor

151215300
8.096.068: RNCC: 3 | RNVC: 2

24 May 1996

5340-15-215-0323
Fascetta (Confezion

152150323
140X3,5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-006-2408
Coperchio Speciale

150062408
0-16526: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-105-6022
Staffa A Gomito

151056022
22991: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-007-3675
Fascetta Speciale

150073675
0-33727: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-006-2545
Raschiatore Special

150062545
0-28878: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-122-5608
Plug

151225608
PS701-6224: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-206-7095
Pin Assy

152067095
109-3000-03-103: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-15-162-0294
Body

151620294
291A07110-105: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-062-8727
Anello Speciale

150628727
0-42571: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-110-7973
Protezionepomello

151107973
96201-001A00: RNCC: 3 | RNVC: 2
96201-001: RNCC: 5 | RNVC: 2

21 Jul 1990

5340-15-222-2256
Spessore Lamiera Di

152222256
S1-143L: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-005-6462
Anello Di Spinta

150056462
0-21122: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-147-9973
Base Dentata

151479973
129-0640-86-117: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-210-6695
Linguetta A Disco

152106695
UNI6606-5X7.5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-110-2063
Semicernieraspecial

151102063
109-0311-67-101: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-220-5447
Tassello Acc. Mm.7

152205447
TASSELLOACC7MMVITE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-060-8239
Rim Clen Clamp (1)

150608239
000200597000: RNCC: 5 | RNVC: 2
000200597000: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-105-3414
Handwheel

151053414
04-084-B-57: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-231-1140
Lucchetto Ad Arco M

152311140
555: RNCC: 3 | RNVC: 2
534015E089896: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-179-1565
Wg Clamp

151791565
Q 4 3193 2168: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-205-9439
Supporto A Sella Tu

152059439
00A07600: RNCC: 3 | RNVC: 2
(241)A010600A07600: RNCC: 5 | RNVC: 2

20 Apr 2012

5340-15-138-5350
Supporto Elastico M

151385350
7594993: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-156-8384
Rubber Bumper

151568384
25 X 30 X 70: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-15-066-1715
Hand Grip

150661715
P-892996-001: RNCC: 3 | RNVC: 2
P892996-001: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-199-3135
Semicerniera

151993135
(241)A0126212-4600-11-3: RNCC: 3 | RNVC: 2
212-4600-11-3: RNCC: 3 | RNVC: 2

28 Feb 2005

5340-15-170-8153
Supporto

151708153
340-0761/04: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-122-7055
Compasso

151227055
X10976-802: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-115-9145
Headless Straight Rod

151159145
320089F91: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-025-8563

5340-15-050-2169
Turnbuckle

150502169
1304-3-06M: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-1445
Assieme Impugnatura

151071445
303-02-0130: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-117-0185
Jumper

151170185
SF260-14-623-09: RNCC: 3 | RNVC: 2
SF260-14-623-09: RNCC: 5 | RNVC: 9

28 Jul 1993

5340-15-041-7693
Perno

150417693
2-5331-104-41266: RNCC: 3 | RNVC: 2
2-5331-1-04-41266: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-222-2275
Ang. Fissaggio 80X8

152222275
S1-110D: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-166-4944
Sonda Tirafili Mt 1

151664944
0415: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-171-5341
Staffa A Muro Zinca

151715341
CO 491: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-061-8167
Fascetta Speciale

150618167
0-102223: RNCC: 3 | RNVC: 2

30 Nov 1982

5340-15-153-9602
Forcella Testa Di T

151539602
230922482: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-216-6668
Collare Pesante Da

152166668
CPT 3/8': RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-169-6656
Lucchetto S&G

151696656
F72017685: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-127-6684
Anello Bloccaggio C

151276684
879830: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-065-9166
Adapter

150659166
4706996: RNCC: 3 | RNVC: 2

22 Nov 1983

5340-15-120-7540
Manual Contro Lever

151207540
GB254-420-048: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-005-8962
Threaded End Tensioning Tie Rod

150058962
520-12-03A: RNCC: 3 | RNVC: 2

21 Apr 1976

5340-15-204-1180
Utility Resilient Mount

152041180
MG-DNP-20: RNCC: 3 | RNVC: 2

7 Sep 2011

5340-15-007-5223
Nonrotating Shaft Eye Bracket

150075223
1139-05-139: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-180-4274
Optic Units S Cover

151804274
205-1600-14-109: RNCC: 3 | RNVC: 2
(241)A0126205-1600-14-109: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-203-1900
Door Assy

152031900
P75TC953A11-401: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-004-4176
Terminale Chiusura

150044176
6-5809-105-39650: RNCC: 3 | RNVC: 2

5 May 1978

5340-15-049-4258
Perno Per Cerniera

150494258
2-5321-106-46818: RNCC: 3 | RNVC: 2
2-5321-1-06-46818: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-107-2319
Seat Pipe Support

151072319
27856-101: RNCC: 3 | RNVC: 2

2 Mar 1988

5340-15-192-9970
Escutcheon Plate

151929970
1380525Z03: RNCC: 3 | RNVC: 2
(241)AB5551380525Z03: RNCC: 5 | RNVC: 2

1 Apr 2010

5340-15-154-5046
Manual Control Handle

151545046
1Q 153315: RNCC: 3 | RNVC: 2
1Q 153315: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-110-5607
Helical Compression Spring Seat

151105607
155675: RNCC: 2 | RNVC: 2
1P 155675: RNCC: 3 | RNVC: 2
155675: RNCC: 5 | RNVC: 9
1P 155675: RNCC: 5 | RNVC: 9

18 Feb 1995

5340-15-178-5322
Manual Control Lever

151785322
R250-06: RNCC: 3 | RNVC: 2
R250-06: RNCC: 5 | RNVC: 9

1 Jul 2005

5340-15-114-9041
Moduloprotezionicom

151149041
141-3550/01: RNCC: 3 | RNVC: 2
141-3550/01: RNCC: 8 | RNVC: 1

4 Sep 1992

5340-15-151-8142
Double Angle Bracket

151518142
0-159024: RNCC: 3 | RNVC: 2
(241)A39630-159024: RNCC: 5 | RNVC: 2
1PA39630-159024: RNCC: 5 | RNVC: 2

13 Jul 2000

5340-15-121-4499
Resilient Mount

151214499
VZA-U-40: RNCC: 3 | RNVC: 2

12 Mar 1996

5340-15-065-0529
Attacco A Cerniera

150650529
13830-001: RNCC: 3 | RNVC: 2

6 Oct 1984

5340-15-009-0542
Coperchio Speciale

150090542
4656176: RNCC: 3 | RNVC: 2

16 Apr 1980

5340-15-149-6355
Retainin Ring Stick

151496355
3033139: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-147-5801
T-Fitting

151475801
98RV904: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-002-3692
Stand Base

150023692
369-09071-109: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-15-059-4617
Dust And Moisture Seal Protective Cap-Plug

150594617
10-08-07-01: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-061-7741
Dust And Moisture Seal Protective Cap-Plug

150617741
3748230: RNCC: 3 | RNVC: 2

7 Sep 1982

5340-15-157-7931
Link Assy

151577931
145A0031-405: RNCC: 3 | RNVC: 2

21 Oct 2003

5340-15-193-4678
Base Antivibrante P

151934678
E6140.0000: RNCC: 3 | RNVC: 2

17 May 2010

5340-15-182-8746
Espositore A Binari

151828746
RAIL340: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-113-5126
Dispositivodisblocc

151135126
SH.3723-401: RNCC: 3 | RNVC: 2

27 Aug 1991

5340-15-001-8933
Pattino Di Metallo

150018933
8873/64/5015-19-3: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-065-7290
Sadd Pipe Support

150657290
109-0616-65-3: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-060-6039
Seat Pipe Support

150606039
69529-101: RNCC: 3 | RNVC: 2

1 Jun 1977

5340-15-154-1013
Elemento Di Collega

151541013
0-162402: RNCC: 3 | RNVC: 2
(241)A39630-162402: RNCC: 5 | RNVC: 2
1PA39630-162402: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-154-4648
Maniglia Scorriment

151544648
60130291: RNCC: 3 | RNVC: 2
(241)A39630-117322: RNCC: 5 | RNVC: 2
0-117322: RNCC: 5 | RNVC: 2
1PA424960130291: RNCC: 8 | RNVC: 2

11 Jun 2001

5340-15-153-3853
Rullo Cilindrico

151533853
A6150-91031-1: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-056-7062
Threaded End Tensioning Tie Rod

150567062
1127-23-143: RNCC: 3 | RNVC: 2

5 Apr 1996

5340-15-114-6717
Piastra Di Rinforzo

151146717
212-7699-101: RNCC: 3 | RNVC: 2

2 Jun 1994

5340-15-067-9491
Cerniera

150679491
36.148: RNCC: 3 | RNVC: 2
36.148: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-236-4121
Blocchetto Per Serr

152364121
F00429: RNCC: 3 | RNVC: 2
534015E054683: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-105-5988
Staffa A Gomito

151055988
4567600: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-151-7804
Piastra

151517804
0-179821: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-186-3326
Spiralina Per Piomb

151863326
GR.500MM.0,45: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-178-4929
Dust And Moisture Seal Protective Cap

151784929
308190-002: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-170-8616
5X6 Ar Manicotto 2

151708616
67133-01/053: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-154-2024
Staffa Superiore De

151542024
0-168275: RNCC: 3 | RNVC: 2
(241)A39630-168275: RNCC: 5 | RNVC: 2
1PA39630-168275: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-149-3194
Riparo Calore Compl

151493194
4886472: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-089-9368
Dust And Moisture Seal Protective Cap

150899368
A75945-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-110-2033
Support

151102033
102378: RNCC: 3 | RNVC: 2
102378: RNCC: 5 | RNVC: 9

6 Sep 1990

5340-15-136-2845
Cerniera

151362845
8475733: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-201-0420
Coperchio Di Protez

152010420
N632U6024201: RNCC: 3 | RNVC: 2
(241)A0126N632U6024201: RNCC: 5 | RNVC: 2

15 May 2006

5340-15-174-7554
F.Sp.Cross-Over Mil

151747554
58634-70/003: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-153-5003
Reinforcement

151535003
J57151746-001: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-134-5525
Staffa

151345525
4104931: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-134-5009
Staffa

151345009
4580912: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-121-8844
Guidacavo

151218844
109-0371-09-1: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-109-3510
Occhionecompleto

151093510
OP-06.00: RNCC: 3 | RNVC: 2

16 Oct 1989

5340-15-160-0010
Padlock

151600010
F720065331: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-149-7823
Piastrina Di Fissag

151497823
865BZ25A03: RNCC: 3 | RNVC: 2

23 Jun 1999

5340-15-115-8581
Angle Brack

151158581
295065P1: RNCC: 3 | RNVC: 2
71-02-031-032: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-187-2260
Vant Plug (Black)

151872260
29863001D40: RNCC: 3 | RNVC: 2

26 Feb 2009

5340-15-152-8130
Fascetta Nylon

151528130
P120636: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-15-109-8993
Puntalino

151098993
470595: RNCC: 3 | RNVC: 2
D0470595: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-195-8013
Threaded End Tensioning Tie Rod

151958013
149804: RNCC: 3 | RNVC: 2
(241)AJ611149804: RNCC: 5 | RNVC: 2

16 May 2011

5340-15-074-4139
Turnbuckle

150744139
2C10UNI20180T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-218-6609
Blocchetti Serratur

152186609
64063035-02: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-170-3435
Clamp

151703435
30-058-5: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-063-4953
Cover Plate Access

150634953
754452: RNCC: 3 | RNVC: 2
75445212: RNCC: 5 | RNVC: 2
9986730: RNCC: 5 | RNVC: 2
754452: RNCC: 5 | RNVC: 9
75445212: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-111-5948
Holder

151115948
A03981-01-20: RNCC: 3 | RNVC: 2
A03981-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-179-5223
Helical Compression Spring Seat

151795223
3014-014: RNCC: 3 | RNVC: 2

2 Mar 2007

5340-15-004-3961
Dust And Moisture Seal Protective Cap

150043961
70-852-311: RNCC: 3 | RNVC: 2
70-852-311: RNCC: 5 | RNVC: 9

3 Apr 1978

5340-15-152-3548
Double Angle Bracket

151523548
0-173957: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-15-064-9442
Scatola Morsetti

150649442
MC261-1-100/B: RNCC: 3 | RNVC: 2

28 Aug 1979

5340-15-200-5340
Tappo Di Sicurezza

152005340
920-4867/01: RNCC: 3 | RNVC: 2
(241)A4582920-4867/01: RNCC: 5 | RNVC: 2

29 Jan 2006

5340-15-154-1461
Tampone Elastico

151541461
0-115180: RNCC: 3 | RNVC: 2
(241)A39630-115180: RNCC: 5 | RNVC: 2
1PA39630-115180: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-062-3244
Cover Plate Access

150623244
1141-31-146: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-105-6364
Collare Serraggio

151056364
CR5-17: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-174-7481
Piatto 60X6 Pealsi1

151747481
54130-01/227: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-193-3217
Spacing Threaded Standoff

151933217
MPG2850-7866-300: RNCC: 3 | RNVC: 2
(241)A5657MPG2850-7866-300: RNCC: 5 | RNVC: 2

30 Apr 2010

5340-15-218-4796
Tassello

152184796
S6S-PLUS: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-183-0758
Pendino Per Gancio

151830758
KNAUF278: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-155-1747
Helical Compression Spring Seat

151551747
G0084: RNCC: 3 | RNVC: 2
03-637-D-6: RNCC: 3 | RNVC: 2
G0084: RNCC: 5 | RNVC: 2
(7001)5340151551747: RNCC: 5 | RNVC: 2

28 Jan 2002

5340-15-107-1730
Locking Lever

151071730
RS412989AE: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-218-1010
Portachiavi A Muro

152181010
MOD.60/20: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-188-4671
Clip

151884671
P-125001-831/832-12C001-608: RNCC: 3 | RNVC: 2

17 Sep 2009

5340-15-195-8699
Multiset Cappellier

151958699
70589TREND: RNCC: 3 | RNVC: 2
(241)AJ61170589TREND: RNCC: 5 | RNVC: 2

23 May 2011

5340-15-220-3550
Lucchetto Antiscass

152203550
15162: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-187-8840
Plexiglass Ring

151878840
00059R0900: RNCC: 3 | RNVC: 2
05990: RNCC: 3 | RNVC: 2

19 May 2009

5340-15-060-1816
Fascetta Speciale

150601816
1740-03: RNCC: 3 | RNVC: 2

4 Dec 1976

5340-15-101-8722
Corrosion Preventive Anode

151018722
3G-A/P/12/260/0: RNCC: 3 | RNVC: 2
A-AC-2-12-120: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-174-7552
Allum. Non Vetr.

151747552
58634-04/001: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-162-1443
Flange.

151621443
340-0090/02: RNCC: 3 | RNVC: 2

2 Mar 2001

5340-15-004-9880
Clamp

150049880
BC1126-0530-2M06A-SB: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-148-9418
Assieme Coperchio

151489418
2302-0079-001: RNCC: 3 | RNVC: 2

5 Nov 1998

5340-15-137-3161
Spessore Laminato

151373161
S6121-60037-26: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-138-4104
Tassello

151384104
5412771: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-157-2453
Piattello Completo

151572453
DE160.03.420: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.420: RNCC: 5 | RNVC: 2

9 Jun 2003

5340-15-112-8534
Flangia

151128534
471672: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-150-9045
Resilient Mount

151509045
25600003A: RNCC: 3 | RNVC: 2

27 Mar 2000

5340-15-151-4208
Dust And Moisture Seal Protective Plug

151514208
0-121841: RNCC: 3 | RNVC: 2
(241)A39630-121841: RNCC: 5 | RNVC: 2
1PA39630-121841: RNCC: 5 | RNVC: 2

24 May 2000

5340-15-062-0851
Hinge

150620851
P884031-004: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-195-7364
Tappo Per Cantonale

151957364
179006125: RNCC: 3 | RNVC: 2
(241)A0199179006125: RNCC: 5 | RNVC: 2

3 May 2011

5340-15-060-6085
Piastrina Guidacavo

150606085
62656-101A1: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-15-150-0187
Perno Dentato

151500187
206-1006-32-1: RNCC: 3 | RNVC: 2

14 Jul 1999

5340-15-170-8355
Front Side Handle

151708355
341-4589/01.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-120-1986
Speci Tappo A Molla

151201986
211A7124-001: RNCC: 3 | RNVC: 2

31 Jan 1995

5340-15-119-7117
Mounting Bracket

151197117
518031890: RNCC: 3 | RNVC: 2

7 Nov 1994

5340-15-149-6116
Frame

151496116
518-38-1010: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-170-8122
Bandella Stagnata 3

151708122
314-0750/07: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-170-3831
Striker

151703831
206-706-012-11: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-151-0014
Window Regulator Handle

151510014
093918379: RNCC: 3 | RNVC: 2
0-113978: RNCC: 5 | RNVC: 2
093918379: RNCC: 5 | RNVC: 2

22 Feb 2000

5340-15-179-2784
Kit Di Montaggio A

151792784
141-8537/01: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-113-2005
Dispositivodifissag

151132005
103-0128/01: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-058-4938
Nut And Bolt Locking Plate

150584938
8128-00-27: RNCC: 3 | RNVC: 2
14-93-68-00: RNCC: 5 | RNVC: 2

1 Oct 1976

5340-15-174-7612
Sw Collaudo As107c

151747612
S40-0016/01.01: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-153-5196
Access Door

151535196
142021016: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-217-7569
Yoke Supersnodato

152177569
05125802: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-215-6701
Accessori Vari Per

152156701
ACCXCABL: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-201-0417
Coperchio Di Protez

152010417
N632U6022201: RNCC: 3 | RNVC: 2
(241)A0126N632U6022201: RNCC: 5 | RNVC: 2

15 May 2006

5340-15-115-6096
Serratura(1)Da Addo

151156096
D0471854: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-181-7240
Tapparella In-Pvc

151817240
TAPPARELLA-IN PVC: RNCC: 3 | RNVC: 2
TAPPARELLAINPVC: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-114-6971
Complessivo Asta

151146971
K527-20-28: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-15-206-7872
Housing Stop

152067872
4232338-00: RNCC: 3 | RNVC: 2

20 Jul 2012

5340-15-116-7487
Hardware Kit Mechan

151167487
538-05-1160: RNCC: 3 | RNVC: 2

24 Jun 1993

5340-15-154-7535
Striscia Materiale

151547535
ZMD98XX-PDR127: RNCC: 3 | RNVC: 2

17 Sep 2001

5340-15-147-5162
Tappo Di Chiusura

151475162
21823-005: RNCC: 5 | RNVC: 2
21823-005: RNCC: 5 | RNVC: 9
21823-005: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-102-3503
Helical Compression Spring Seat

151023503
25093-123: RNCC: 3 | RNVC: 2
25093-123: RNCC: 5 | RNVC: 9

12 Oct 1987

5340-15-234-4032
Collare Fissaggio F

152344032
5634.01FT-1": RNCC: 3 | RNVC: 2
534015E066771: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-113-9388
Capsula A Sfera A S

151139388
1605.10: RNCC: 3 | RNVC: 2

10 May 1993

5340-15-062-0144
Handle

150620144
C7123R1A2: RNCC: 3 | RNVC: 2
C7123R1A2: RNCC: 5 | RNVC: 2
C7123R1A2: RNCC: 5 | RNVC: 9

27 Oct 1980

5340-15-005-2231
Clamp

150052231
649-411-726-0: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-166-5140
Tassello Fisher Con

151665140
FISHER9MM: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-115-2739
Hand Wheel Locking

151152739
518331250: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-180-4288
Relay Support

151804288
212-1135-46-119: RNCC: 3 | RNVC: 2
(241)A0126212-1135-46-119: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-107-6871
Threaded End Tensioning Tie Rod

151076871
1576-23-113: RNCC: 3 | RNVC: 2
157623113: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-157-9880
Latch

151579880
J94344044-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-154-0993
Piastra

151540993
0-160948: RNCC: 3 | RNVC: 2
(241)A39630-160948: RNCC: 5 | RNVC: 2
1PA39630-160948: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-074-4162
Turnbuckle

150744162
2D10UNI20180T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-003-9169
Headless Straight Rod

150039169
182703115: RNCC: 3 | RNVC: 2
(241)A0199182703115: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-195-5837
Anello A Spirale

151955837
EUR 304: RNCC: 3 | RNVC: 2
178901602: RNCC: 5 | RNVC: 2
(241)A3710EUR304: RNCC: 5 | RNVC: 2

7 Apr 2011

5340-15-104-8888
Fissaggio Gaffetta

151048888
4555170: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-108-0799
Metal Runner

151080799
32-03-315: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-210-6688
Linguetta A Disco

152106688
UNI6606-3X3.7: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-174-6773
Drive Non End Brac

151746773
6102306075: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-152-1146
Tassello Gomma

151521146
60156314: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-156-3638
Upper Rear Support

151563638
(241)A3460CBD71408P19: RNCC: 3 | RNVC: 2
CBD71408P19: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-148-7254
Dust And Moisture Seal Protective Cap

151487254
145392-1: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-199-4516
Helical Compression Spring Retainer

151994516
7125.2.3.1: RNCC: 3 | RNVC: 2

10 Apr 2005

5340-15-067-2627
Fascetta

150672627
S252-56: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-197-7325
Helicoil Insert

151977325
OZ-246106: RNCC: 3 | RNVC: 2
OZ-246106: RNCC: 5 | RNVC: 2

22 Apr 2004

5340-15-113-4818
Cernierasportello

151134818
113A6022-014: RNCC: 3 | RNVC: 2

29 Jun 1991

5340-15-195-9170
Bumper

151959170
J04841614-003: RNCC: 3 | RNVC: 2
(241)A0019J04841614-003: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-178-4930
Dust And Moisture Seal Protective Cap

151784930
308190-003: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-206-9947
Fermaglio A Cavallo

152069947
081766: RNCC: 3 | RNVC: 2
(241)A3593081766: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-15-005-1548
Core

150051548
2602196: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-127-1965
Squadretta Anterior

151271965
676119: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-055-6231
Squadra Supporto

150556231
722926: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-060-6090
Piastrina Guidacavo

150606090
63370-101: RNCC: 3 | RNVC: 2

17 Jun 1977

5340-15-056-5735
Resilient Mount

150565735
24229: RNCC: 3 | RNVC: 2
127605197: RNCC: 5 | RNVC: 2
1276-05-197: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-207-1928
Double Angle Bracket

152071928
482700000/58: RNCC: 3 | RNVC: 2
(241)A0199482700000/58: RNCC: 5 | RNVC: 2

20 Sep 2012

5340-15-118-0274
Piastrina Di Strozz

151180274
286878: RNCC: 3 | RNVC: 2
D0286878: RNCC: 3 | RNVC: 2

7 Dec 1994

5340-15-116-8477
Control Rod

151168477
D0469842: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-156-3690
Oil Filter Plug

151563690
(241)A3460CBD71338G01: RNCC: 3 | RNVC: 2
CBD71338G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-153-4018
Elettro-Me Raccordo

151534018
5137-317-05: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-107-9819
Levier De Stop

151079819
L-300-16: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-147-3071
Plate Retai

151473071
302955: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-151-0063
Flangia

151510063
42100840: RNCC: 3 | RNVC: 2
(241)A396300119999: RNCC: 5 | RNVC: 2
0-119999: RNCC: 5 | RNVC: 2
42100840: RNCC: 5 | RNVC: 2

22 Feb 2000

5340-15-105-6307
Collare Serraggio

151056307
10421890: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-101-3009
Slide Rh

151013009
297133P2: RNCC: 3 | RNVC: 2

30 Jan 1988

5340-15-176-0662
Tegolino Per Suppor

151760662
20751: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-115-2023
Circlip

151152023
710-1160-021: RNCC: 3 | RNVC: 2
82-00661: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-041-1073
Gambo A Forcella

150411073
7-8147-100-27548-3: RNCC: 3 | RNVC: 2
7-8147-1-00-27548-3: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-060-8237
Rim Clen Clamp (1)

150608237
000200166000: RNCC: 5 | RNVC: 2
000200166000: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-026-5418

5340-15-200-7681
Resilient Mount

152007681
MG DNP 150: RNCC: 3 | RNVC: 2
(241)A2980MG DNP 150: RNCC: 5 | RNVC: 2

23 Feb 2006

5340-15-103-0396
Tirante Filettato

151030396
79005180: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-187-5347
Screw Thread Insert

151875347
61580-25/012: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-009-2607
Semicerniera

150092607
P-882741-001: RNCC: 3 | RNVC: 2

20 Aug 1980

5340-15-178-0019
Complessi Cerniera

151780019
629/A: RNCC: 3 | RNVC: 2
(241)A1829629/A: RNCC: 5 | RNVC: 2

25 Aug 2004

5340-15-213-8830
Piastra Fissaggio S

152138830
941-000-40: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-237-3797
Catenaccio Vertical

152373797
44871-80: RNCC: 3 | RNVC: 2
534015E088636: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-217-4724
Cabinet Di Sollevam

152174724
434-2471: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-127-4085
Molla

151274085
1740-10-008: RNCC: 3 | RNVC: 2
1740-10-008: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-006-9652
Threaded End Tensioning Tie Rod

150069652
39A506-31-30-10: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-127-4097
Tampone Elastico Su

151274097
1640-72-011: RNCC: 3 | RNVC: 2
1640-72-011: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-202-2312
Rod

152022312
233A1003-015: RNCC: 3 | RNVC: 2
(241)A0019233A1003-015: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-15-215-7278
Bracket Assy Accele

152157278
FL0856-101: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-065-4308
Bolt And Spacer Kit

150654308
41374000: RNCC: 3 | RNVC: 2
41374000: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-005-5321
Rotating Shaft Eye Bracket

150055321
1137-07-907: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-155-2508
Flangia Di Centragg

151552508
GB 266-600-196: RNCC: 3 | RNVC: 2

21 Feb 2002

5340-15-170-7778
Assembled Protectio

151707778
341-4678/01.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-139-3560
Piastrina

151393560
3416166: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-204-3008
Plate Cover

152043008
N635G1108201: RNCC: 3 | RNVC: 2
(241)A0126N635G1108201: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-15-003-9062
Stand Base

150039062
182719917: RNCC: 3 | RNVC: 2
(241)A0199182719917: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-119-3464
Piastra Per Passagg

151193464
992114283K: RNCC: 3 | RNVC: 2

14 Jul 1994

5340-15-136-0929
Staffa

151360929
5937305: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-217-7181
Cilindro Decentrato

152177181
VIRO 70: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-179-9575
Shield

151799575
0000500405658: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-063-2721
Threaded End Tensioning Tie Rod

150632721
60103548: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-000-5336
Sealing Plug Assembly

150005336
EV-99109008: RNCC: 3 | RNVC: 2

14 Mar 2013

5340-15-199-1264
Y Hinge

151991264
G1325521111-001: RNCC: 3 | RNVC: 2

17 Jan 2005

5340-15-049-7528
Fascetta

150497528
AB47-706-217-12: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-058-3533
Escutcheon Plate

150583533
1127-42-176: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-203-1756
Rod

152031756
J28040676-001: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-067-5519
Handwheel

150675519
316898: RNCC: 2 | RNVC: 2
316898: RNCC: 5 | RNVC: 9

1 Apr 1998

5340-15-156-3871
Handle

151563871
(241)A3460CBD71354P05: RNCC: 3 | RNVC: 2
CBD71354P05: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-211-0380
Carello Otto Ruote

152110380
CARRELLO8RUOTE: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-204-4534
Utility Resilient Mount

152044534
E1RP3807-51: RNCC: 3 | RNVC: 2
(241)AJ807E1RP3807-51: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-108-0782
Metal Runner

151080782
32-03-401: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-194-9410
Coppia Di Mensole A

151949410
6007106: RNCC: 3 | RNVC: 2
(241)A51666007106: RNCC: 5 | RNVC: 2

8 Feb 2011

5340-15-153-9006
Threaded End Tensioning Tie Rod

151539006
9406T6: RNCC: 3 | RNVC: 2
(241)A333400084066: RNCC: 4 | RNVC: 1
00084066: RNCC: 5 | RNVC: 2

9 Mar 2001

5340-15-103-5726
Extension Drawer Slide

151035726
C6185212SY: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-15-148-9800
Corrosion Preventive Anode

151489800
MH-A633-0001-02: RNCC: 3 | RNVC: 2

9 Nov 1998

5340-15-060-8463
Electrical-Me Post

150608463
F403B5-12: RNCC: 3 | RNVC: 2
F403B5-12: RNCC: 5 | RNVC: 2

20 May 1977

5340-15-113-2482
Rinforzoserbatoiono

151132482
345A4271-001: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-049-5044
Forcella

150495044
2-3189-100-24708-2: RNCC: 3 | RNVC: 2
2-3189-1-00-24708-2: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-207-0313
Lamiera Grecata

152070313
4-275 H8: RNCC: 3 | RNVC: 2
(241)AF0514-275H8: RNCC: 5 | RNVC: 2

16 Aug 2012

5340-15-212-6011
Paletti Per Porte I

152126011
PPL: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-110-5757
Coperchio Di Access

151105757
1Q 245205: RNCC: 3 | RNVC: 2
1Q 245205: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-142-9164
Cover

151429164
482382: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-175-1580
Angle Piece

151751580
60138351: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-216-0154
Serratura Da Infilo

152160154
520.40: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-8294
Angle Bracket

150018294
5949783621: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-156-3866
Protector

151563866
(241)A3460CBD71353P03: RNCC: 3 | RNVC: 2
CBD71353P03: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-110-6651
Threaded End Tensioning Tie Rod

151106651
2128-65652: RNCC: 3 | RNVC: 2

15 Jan 1990

5340-15-001-4322
Double Angle Bracket

150014322
98198513: RNCC: 3 | RNVC: 2

2 Jul 2013

5340-15-065-7256
Perno Speciale

150657256
109-0700-59-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-152-9032
Helical Compression Spring Seat

151529032
1Z 597623LA: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-009-6399
Piolo

150096399
1113569: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-163-1635
Support

151631635
9946096: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-066-1529
Hinge

150661529
P-893064-001: RNCC: 3 | RNVC: 2
P893064-001: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-005-9955
Supporto

150059955
8087103: RNCC: 3 | RNVC: 2
8087103: RNCC: 5 | RNVC: 2
8087103: RNCC: 5 | RNVC: 9
8087103: RNCC: 5 | RNVC: 9
8087103: RNCC: 5 | RNVC: 9

11 Aug 1979

5340-15-154-1457
Dispositivo Di Bloc

151541457
0-115161: RNCC: 3 | RNVC: 2
(241)A39630-115161: RNCC: 5 | RNVC: 2
1PA39630-115161: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-116-8113
Resilient Mount

151168113
V1E5854-11: RNCC: 3 | RNVC: 2
3-75856.0002//D: RNCC: 5 | RNVC: 2
3-75856.0002//D: RNCC: 5 | RNVC: 9

24 Jun 1993

5340-15-151-6868
Tassello Elastico C

151516868
93826649: RNCC: 3 | RNVC: 2

27 Jun 2000

5340-15-136-1989
Staffetta

151361989
4233014: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-156-3700
Support Bracket

151563700
(241)A3460CBD71330P03: RNCC: 3 | RNVC: 2
CBD71330P03: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-074-4186
Turnbuckle

150744186
2A10UNI20190T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-060-1748
Turnbuckle

150601748
20828-001: RNCC: 3 | RNVC: 2

20 Jan 1977

5340-15-212-7661
Molla

152127661
450-0203: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-152-8085
Resilient Mount

151528085
P131102: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-15-136-9418
Morsetto

151369418
45C26D16-18: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-156-2013
Base

151562013
(241)A3460CBD71209P01: RNCC: 3 | RNVC: 2
CBD71209P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-106-3298
Staffa

151063298
8531561: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-186-3765
Picchetto Grande

151863765
FIR-PK30701: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-118-0385
Portaguarnizioni

151180385
D0484563: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-049-7964
Blocchetto Gomma

150497964
AB682-107-7: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-040-3552
Handwheel

150403552
6-3169-1-00-23060-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-004-3541
Supporto Angolare

150043541
P-110261-001: RNCC: 3 | RNVC: 2
P110261-001: RNCC: 5 | RNVC: 2

14 Jun 1978

5340-15-186-3719
Piastra Porta Appar

151863719
PSC/F1/2: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-060-9454
Rim Clen Clamp (1)

150609454
F304C3B11: RNCC: 3 | RNVC: 2
F304C3B-11: RNCC: 5 | RNVC: 2
F304C3B-11: RNCC: 5 | RNVC: 2

22 May 1977

5340-15-154-9345
Hpc Washi Injector

151549345
CBD71097P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-116-9736
Heli Coil

151169736
HM1-10-150CN-15: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-203-1865
Support

152031865
P75TC415A41-001: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-236-1056
Graffette Aggraffat

152361056
390-230: RNCC: 3 | RNVC: 2
534015E143186: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-057-4162
Rubber Bumper

150574162
C245429C: RNCC: 5 | RNVC: 2
C245429C: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-139-4301
Tassello

151394301
4687393: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-151-7550
Hinge

151517550
J52850201-002: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-136-9422
Morsetto

151369422
45C26-16-20: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-113-7941
Cerniera Portello A

151137941
129-0640-20-102: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-148-0012
Semicerniera

151480012
129-0640-46-101: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-178-4940
Dust And Moisture Seal Protective Cap

151784940
307061: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-220-0537
Trave Collegamento

152200537
S1-137G: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-176-7596
Bracket (Supera Il

151767596
49135-001: RNCC: 3 | RNVC: 2
49135-001: RNCC: 5 | RNVC: 9

14 Feb 2004

5340-15-128-5405
Molla

151285405
8547: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-149-1112
Staffa

151491112
60172181: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-115-7085
Tappo Di Tenuta Com

151157085
D1401038: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-119-4905
Control Rod

151194905
4196-A1: RNCC: 3 | RNVC: 2

19 Aug 1994

5340-15-180-1212
Watch Glass

151801212
HR348032: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-139-4556
Canaletto

151394556
4746074: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-206-8519
Co-Ordinating Arm

152068519
21310110: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-154-1452
Cappuccio

151541452
0-115145: RNCC: 3 | RNVC: 2
(241)A39630-115145: RNCC: 5 | RNVC: 2
1PA39630-115145: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-148-7023
Ingrassatore

151487023
N102001610: RNCC: 3 | RNVC: 2

22 Oct 1998

5340-15-156-3907
Build Base Assy

151563907
(241)A3460CBD71355G01: RNCC: 3 | RNVC: 2
CBD71355G01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-063-7274
Control Radio Beaco

150637274
40.10.01.105: RNCC: 3 | RNVC: 2
19.05.82.20: RNCC: 5 | RNVC: 2

9 Jun 1983

5340-15-155-4890
Upper Ring

151554890
CBD71191P01: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-214-7519
Serratura Meroni

152147519
SERR.ART.13: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-178-5964
Shock Absorber

151785964
103-512-4 NXA: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-114-4114
Dispositivodiblocca

151144114
39X593-12-04: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-15-045-2931
Fascetta

150452931
N0R2-505-06-20A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-209-0108
Coperchio

152090108
N15491: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-6116
Tubo Sottoflangia

151156116
D0471914: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-041-2460
Staffetta Per Ancor

150412460
7-8415-201-34259: RNCC: 3 | RNVC: 2
7-8415-2-01-34259: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-122-1387
Pivot Centr

151221387
A-39105-401: RNCC: 3 | RNVC: 2
A39105-401: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-193-3877
Angle Bracket

151933877
504263954: RNCC: 3 | RNVC: 2
(241)A4249504263954: RNCC: 5 | RNVC: 2

11 May 2010

5340-15-112-1901
Threaded End Tensioning Tie Rod

151121901
244A0042-001: RNCC: 3 | RNVC: 2

28 Oct 1990

5340-15-150-5877
Piastra Forata

151505877
A37210-01-20: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-109-1093
Dispositivoparafiam

151091093
344A0057-005: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-153-4906
Staffa

151534906
D1420497: RNCC: 3 | RNVC: 2

2 Feb 2001

5340-15-151-2707
Rod

151512707
8854126-121: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-101-5167
Structual Angle

151015167
109-0371-01-36: RNCC: 3 | RNVC: 2

2 Dec 1986

5340-15-149-9083
Sealing Plug Assembly

151499083
R.1/2-ED: RNCC: 3 | RNVC: 2

19 Jul 1999

5340-15-206-2790
Utility Resilient Mount

152062790
VZA-R-AVU-60/5.8: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-100-8076
Leva A Piastra

151008076
109-0362-10-3: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-061-4025
Escutcheon Plate

150614025
27080-001A1: RNCC: 3 | RNVC: 2

19 Oct 1977

5340-15-207-8548
Wheel Support Pivot

152078548
440-9-130: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-231-1118
Serratura Orizzonta

152311118
34980/978: RNCC: 3 | RNVC: 2
534015E078582: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-151-7764
Guida Scorrim.

151517764
0-103255: RNCC: 3 | RNVC: 2
(241)A39630-103255: RNCC: 5 | RNVC: 2
1PA39630-103255: RNCC: 5 | RNVC: 2

10 Jul 2000

5340-15-041-2417
Fascetta

150412417
1-2756-116-24446-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-131-7630
Handwheel

151317630
R1886: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-116-9761
Outer Shaft Assembl

151169761
W018288: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-154-9198
Bracket

151549198
CBD70713P03: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-15-104-8867
Fissaggio Gaffetta

151048867
742670: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-116-9652
Plate

151169652
B515MPE057: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-123-7644
Spring

151237644
68-103170-001: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-109-8411
Maniglia

151098411
67-103053-003: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-15-040-2320
Forcella

150402320
2-3175-100-24998: RNCC: 3 | RNVC: 2
2-3175-1-00-24998: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-120-5135
Bracket

151205135
P-175501-401/402-14E001-206: RNCC: 3 | RNVC: 2
P175501-401/402-14E001-206: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-15-115-7004
Piastra Intermedia

151157004
D1401057: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-139-7103
Chiavistello

151397103
A.0134000: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-007-4977
Nonrotating Shaft Eye Bracket

150074977
1239-01-150: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-064-6329
Resilient Mount

150646329
1376-23-287: RNCC: 3 | RNVC: 2
137623287: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-101-4233
Rubber Bumper

151014233
1376-08-138: RNCC: 3 | RNVC: 2
137608138: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-053-2387
Turnbuckle

150532387
6-3149-501-49184: RNCC: 3 | RNVC: 2

1 Sep 1970

5340-15-153-6687
Tappo Di Sfogo

151536687
TSF3-1/2"GAS: RNCC: 1 | RNVC: 3
142057031: RNCC: 5 | RNVC: 3

20 Feb 2001

5340-15-215-9302
Serratura A Pomolom

152159302
600-02-80: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-191-6201
Manichetta

151916201
NOR2-510-03-15: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-147-0655
Supporto Ad Angolo

151470655
109-0858-36-125: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-066-1695
Handle Assy

150661695
P-894865-401: RNCC: 3 | RNVC: 2
P894865-401: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-120-1334
Fork

151201334
M910-20-22-02: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-15-151-1150
Assieme Staffa Di F

151511150
381-0336/01: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-060-2800
Plastic Bumper

150602800
22154-101: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-15-139-6762
Maniglia

151396762
380-0456/01: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-110-2801
Bracket

151102801
P125388-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-220-0522
Trave Inclinata Ipe

152200522
S1-112A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-187-0545
Handle (Rh)

151870545
109-0362-21-106: RNCC: 3 | RNVC: 2

9 Feb 2009

5340-15-157-7071
Turnbuckle

151577071
TENDITORE INOX 2 FORCELLE 8MM: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-007-9890
Latch Set

150079890
7-7860-100-42608: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-149-4346
Trapezio Superiore

151494346
51460-S10-020: RNCC: 3 | RNVC: 2

1 Mar 1999

5340-15-147-9975
Base Dentata

151479975
129-0640-86-119: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-186-7540
Ass.Mensola

151867540
A6121-92012-2: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-062-0680
Hinge

150620680
P-882742-001: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-220-0491
Angol. Caland. R 15

152200491
S1-7D: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-066-0780
Cover Plate Access

150660780
4-65-230: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-101-3005
Hinge Half

151013005
P-135197-001: RNCC: 3 | RNVC: 2
P135197-001: RNCC: 5 | RNVC: 2

30 Jan 1988

5340-15-136-7272
Fascetta

151367272
MS21919BH5: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-122-1129
Braccio Complessivo

151221129
129-0308-12-103: RNCC: 3 | RNVC: 2

7 May 1996

5340-15-154-1866
Terminale

151541866
53-430-0013: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-148-9295
Tappo Guida

151489295
2203-0020-001: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-15-009-2566
Semicerniera

150092566
P-882742-003: RNCC: 3 | RNVC: 2

20 Aug 1980

5340-15-062-2652
Staffa Speciale

150622652
4-21816-001D: RNCC: 5 | RNVC: 2
4-21816-001D: RNCC: 5 | RNVC: 9

29 Jun 1981

5340-15-118-5271
Corrosion Preventive Anode

151185271
AF-8-15633: RNCC: 3 | RNVC: 2

3 Oct 1994

5340-15-064-6863
Hinge

150646863
P-175603-002: RNCC: 3 | RNVC: 2
P175603-002: RNCC: 5 | RNVC: 2

10 Jun 1984

5340-15-054-3764
Anello

150543764
310724: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-116-7583
Bracket Mounting

151167583
SF260-17-59-01: RNCC: 3 | RNVC: 2
SF260-17-59-01: RNCC: 5 | RNVC: 9

24 Jun 1993

5340-15-119-6786
Dust And Moisture Seal Protective Cap-Plug

151196786
834565-10: RNCC: 3 | RNVC: 2
834565-10: RNCC: 5 | RNVC: 9

19 Oct 1994

5340-15-218-5311
Tampone Abrasivo Gr

152185311
9696-320: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-065-3652
Bracket

150653652
C01-1100-302: RNCC: 3 | RNVC: 2

10 Jun 1985

5340-15-137-3181
Copertura Verricell

151373181
S6121-62800-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-114-6844
Staffettafissaggioa

151146844
UA29007-11C: RNCC: 3 | RNVC: 2

17 Jul 1992

5340-15-118-6049
Calotte

151186049
73133622: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-152-4081
Dust And Moisture Seal Boot

151524081
9505382: RNCC: 3 | RNVC: 2
(241)A39630-119645: RNCC: 5 | RNVC: 2
0-119645: RNCC: 5 | RNVC: 2
9505382: RNCC: 5 | RNVC: 2

7 Sep 2000

5340-15-187-6490
Fitting Assy (Lh)

151876490
109-0714-95-107: RNCC: 3 | RNVC: 2
(241)A0126109-0714-95-107: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-115-8469
Bracket

151158469
264431G1: RNCC: 3 | RNVC: 2
71-02-007-004: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-114-1700
Dispositivodifissag

151141700
101-1125/01: RNCC: 3 | RNVC: 2

15 May 1992

5340-15-174-7473
Nastro 150X0.1Cu Be

151747473
53630-01/003: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-105-0311
Chiavistello Da Add

151050311
01636: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-2021
Cap

151152021
500-2135-072: RNCC: 3 | RNVC: 2
82-00663: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-110-3730
Achse

151103730
F304C3A-32: RNCC: 3 | RNVC: 2
F304C3A-32: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-145-1941
Helical Compression Spring Seat

151451941
311304F94 ITEM 40: RNCC: 3 | RNVC: 2
79951F01: RNCC: 5 | RNVC: 2

2 Jun 1997

5340-15-178-8225
Handle

151788225
0.300.15346: RNCC: 3 | RNVC: 2
143769-139: RNCC: 5 | RNVC: 2

15 Dec 2005

5340-15-151-5297
Silentblock

151515297
0-01741: RNCC: 3 | RNVC: 2
(241)A39630-01741: RNCC: 5 | RNVC: 2
1PA39630-01741: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-113-0829
Access Door

151130829
109-0320-91-43A1: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-117-5373
Boccola Speciale

151175373
FFAA0300-0105: RNCC: 3 | RNVC: 2

12 Nov 1993

5340-15-155-0052
Station Door Access

151550052
J52445002-402: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-15-052-1390
Stand Off

150521390
H793-12-40-04: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-117-9153
Corpo Tenditore Uso

151179153
291A3015-001: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-058-4694
Resilient Mount

150584694
99A487-524: RNCC: 3 | RNVC: 2

2 Jul 1976

5340-15-157-5142
Fl Mounting Plate

151575142
300-4164/01: RNCC: 3 | RNVC: 2
(241)A0069300-4164/01: RNCC: 5 | RNVC: 2

11 Sep 2003

5340-15-001-8930
Pattino Di Metallo

150018930
8873/64/5015-18: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-174-7448
Lamiera 1.20X5 Crni

151747448
51460-01/011: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-121-8966
Shock Mount Pad

151218966
132508110: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-204-9588
Riduzione

152049588
647000000223: RNCC: 3 | RNVC: 2
(241)AK137647000000223: RNCC: 5 | RNVC: 2

2 Feb 2012

5340-15-127-0900
Staffa Sostegno Tub

151270900
378898: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-109-8976
Obturator

151098976
371540: RNCC: 3 | RNVC: 2
D0371540: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-064-8326
Turnbuckle Assembly

150648326
193-0693/12: RNCC: 3 | RNVC: 2

1 Mar 1983

5340-15-115-8612
Mounting St

151158612
295058P1: RNCC: 3 | RNVC: 2
71-02-031-028: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-214-6791
Assieme Connettore

152146791
BTO1A913A02-401: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-005-5323
Rotating Shaft Eye Bracket

150055323
1137-07-901: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-180-4260
Reinforcement

151804260
205-1600-10-189: RNCC: 3 | RNVC: 2
(241)A0126205-1600-10-189: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-115-7119
Flangia Tubo Misura

151157119
D0470009: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-200-1685
Tappo In Sughero

152001685
A164A2BS23: RNCC: 3 | RNVC: 2
(241)A0126A164A2BS23: RNCC: 5 | RNVC: 2

17 Oct 2005

5340-15-185-7936
Spazzola Acciaio Mm

151857936
D4014/0: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-119-7694
Synchro Clamp

151197694
TN4-0023-031-06: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-174-7555
Film Spesso Milit.

151747555
58634-70/006: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-170-8605
5X6 Ma Manicotto 2

151708605
67133-01/051: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-041-7559
Escutcheon Plate

150417559
2-1955-101-42217-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-157-9833
Hinge Half

151579833
J94345412-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-154-1953
Double Angle Bracket

151541953
0-162991: RNCC: 3 | RNVC: 2
1PA39630-162991: RNCC: 5 | RNVC: 2
(241)A39630-162991: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-114-6968
Blocchetto Arresto

151146968
39A1270-12A: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-15-139-5971
Ammortizzatore Elas

151395971
H125-216-90-107-5: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-151-7563
Stop Assembly

151517563
J52850300-403: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-181-1719
Pattino

151811719
178950231: RNCC: 3 | RNVC: 2
(241)A0199178950231: RNCC: 5 | RNVC: 2

5 Nov 2008

5340-15-156-3589
Dust Protective Cap

151563589
(241)A3460CBD71085P01: RNCC: 3 | RNVC: 2
CBD71085P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-156-3841
Plugging Plate

151563841
(241)A3460CBD71341P01: RNCC: 3 | RNVC: 2
CBD71341P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-118-0332
Flangia Porta Guarn

151180332
D0467930: RNCC: 3 | RNVC: 2

15 Nov 1994

5340-15-062-3517
Hinge

150623517
P-894815-013: RNCC: 3 | RNVC: 2
P894815-013: RNCC: 5 | RNVC: 2

25 Jan 1982

5340-15-231-4441
Supporto Girevole C

152314441
RCM100/GFD: RNCC: 3 | RNVC: 2
534015E094081: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-152-0535
Rdu Front Bracket

151520535
8854 124-221: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-204-0325
Nut And Bolt Locking Plate

152040325
1P 345098: RNCC: 3 | RNVC: 2
1P345098: RNCC: 3 | RNVC: 2
(241)A01061P 345098: RNCC: 5 | RNVC: 2
1P 345098: RNCC: 5 | RNVC: 2

19 Aug 2011

5340-15-157-8979
Staffa Speciale

151578979
0-114217: RNCC: 3 | RNVC: 2
(241)A39630-114217: RNCC: 5 | RNVC: 2
1PA39630-114217: RNCC: 5 | RNVC: 2

20 Nov 2003

5340-15-062-1849
Retainer Helical

150621849
P-892610-001: RNCC: 3 | RNVC: 2
P892610-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-116-1078
Manual Control Lever

151161078
DPR24130/2-79-107-108: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-220-0533
Trave Collegamento

152200533
S1-137C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-154-1012
Elemento Di Collega

151541012
0-162401: RNCC: 3 | RNVC: 2
(241)A39630-162401: RNCC: 5 | RNVC: 2
1PA39630-162401: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-198-6120
Coperchio Cuscinett

151986120
010694: RNCC: 3 | RNVC: 2
(241A3593010694: RNCC: 5 | RNVC: 2

19 Oct 2004

5340-15-217-9840
Lucchetto Rettangol

152179840
ISEO90: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-196-6305
Padlock

151966305
PN UAS 00046220: RNCC: 3 | RNVC: 2
5340F76037765: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-112-8205
Saltarello

151128205
370802: RNCC: 3 | RNVC: 2
D0370802: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-052-1181
Tirante

150521181
H787-12-64: RNCC: 3 | RNVC: 2

10 Apr 1974

5340-15-188-9842
Spring Attachment

151889842
129-0011-37-103: RNCC: 3 | RNVC: 2
(241)A0126129-0011-37-103: RNCC: 5 | RNVC: 2

12 Jan 2010

5340-15-178-5999
Clamp

151785999
541-41-1110: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-162-0772
Jumper

151620772
NS6D001C7-8-155: RNCC: 3 | RNVC: 2
NS6D001C7-8-155: RNCC: 5 | RNVC: 9

29 Jan 2001

5340-15-179-8055
Clamp

151798055
6-05-008: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-210-6696
Linguetta A Disco

152106696
UNI6606-5X9: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-137-3167
Serratura Completa

151373167
S6121-62753-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-170-8585
2 Epox Ve Lastra 0

151708585
58572-01/401: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-119-3663
Piastra Di Chiusura

151193663
7-82785-000-79016: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-15-066-1731
Bracket

150661731
P-892989-001: RNCC: 3 | RNVC: 2
P892989-001: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-170-8536
5Mm Gomma Lastra 1

151708536
58121-02/001: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-136-7317
Portello D'accesso

151367317
S6120-62616-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-200-0608
Dust And Moisture Seal Protective Cap-Plug

152000608
13HJ04643008S01-405-17: RNCC: 3 | RNVC: 2

19 Sep 2005

5340-15-142-3079
Protezione Comando

151423079
DNS20-B062890/69: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-110-0322
Attaccoinferiore

151100322
03097-101A00: RNCC: 3 | RNVC: 2
03097-101: RNCC: 5 | RNVC: 2

11 Mar 1990

5340-15-153-4026
Elettro-Me Raccordo

151534026
5137-351-14: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-001-7715
Cover Hook

150017715
150 000 13-19: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-112-8119
Flangiad

151128119
468956: RNCC: 3 | RNVC: 2
D0468956: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-195-7070
Winch Control

151957070
HPCSAG21K01SS0800: RNCC: 3 | RNVC: 2

27 Apr 2011

5340-15-149-3897
Cover

151493897
1137-16-257: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-181-3508
Rod

151813508
312P7739-01: RNCC: 3 | RNVC: 2

3 Dec 2008

5340-15-041-1016
Forcella Destremita

150411016
7-8163-100-27591-1: RNCC: 3 | RNVC: 2
7-8163-1-00-27591-1: RNCC: 5 | RNVC: 2

1 Jan 1974

Load More Results