What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 68 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 68 of 72

5340-15-041-0681
Collarino

150410681
7-5945-100-31380: RNCC: 3 | RNVC: 2
7-5945-1-00-31380: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-119-5050
Guaina Intrecciata

151195050
999-8001-65-130: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-110-2819
Bracket Ang

151102819
P135241-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-007-4989
Nonrotating Shaft Eye Bracket

150074989
1239-05-111: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-062-7629
Arresto A Piastrina

150627629
P-892902-001: RNCC: 3 | RNVC: 2
P892902-001: RNCC: 5 | RNVC: 2

23 Mar 1982

5340-15-209-8951
Lucchetto Gr 40

152098951
ABCGR40: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-187-8843
Conveyor

151878843
58878: RNCC: 3 | RNVC: 2
00588R0780: RNCC: 3 | RNVC: 2

19 May 2009

5340-15-175-1581
Facing Mat

151751581
60167077: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-128-1650
Control Rod

151281650
4043200: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-202-9868
Spciale Fibbia

152029868
161340385: RNCC: 3 | RNVC: 2
(241)A0199161340385: RNCC: 5 | RNVC: 2

14 Oct 2007

5340-15-065-6266
Poignee Speciale

150656266
541-60-1020: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-170-3225
Flow Multiplier

151703225
GM2-25094+D40: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-162-1444
Rack Holder.

151621444
340-0485/04: RNCC: 3 | RNVC: 2

2 Mar 2001

5340-15-179-2980
Hydraulic Deflector

151792980
9BUS110070: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-199-4784
Supporto Serbatoio

151994784
1P 611484: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-040-5203
Forcella

150405203
RA2500-2: RNCC: 3 | RNVC: 2
RA2500-2: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-139-7096
Elemento Imbracamen

151397096
A.0125800: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-136-9424
Morsetto

151369424
45C26-16-12: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-105-2074
Rubber Bumper

151052074
8984322: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-2711
Piston

151152711
518391010: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-232-9594
Tassello In Accaio

152329594
SLM 6: RNCC: 3 | RNVC: 2
534015E150796: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-149-4929
Pattino Di Metallo

151494929
0552000-7: RNCC: 3 | RNVC: 2

20 Apr 1999

5340-15-150-0829
Shock Mount Pad

151500829
300.10001.0: RNCC: 3 | RNVC: 2
300.10001.0: RNCC: 5 | RNVC: 2

11 Dec 2002

5340-15-113-5433
Slittadicentraggimo

151135433
331A2367-003: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-151-7880
Tirante

151517880
0-103477: RNCC: 3 | RNVC: 2
(241)A39630-103477: RNCC: 5 | RNVC: 2
1PA39630-103477: RNCC: 5 | RNVC: 2

10 Jul 2000

5340-15-162-2786
Dust And Moisture Seal Protective Cap

151622786
60-17416-00: RNCC: 3 | RNVC: 2

4 Jun 2001

5340-15-157-2517
Corrosion Preventive Anode

151572517
STI7-306 A1(500X80X40): RNCC: 3 | RNVC: 2
ZINCO TIPO A1(500X80X40): RNCC: 3 | RNVC: 2
(241)A0400STI7-306A1(500X80X40): RNCC: 5 | RNVC: 2

11 Jun 2003

5340-15-201-2855
Handwheel

152012855
GN 5336-60-B12-B-PL: RNCC: 3 | RNVC: 2
122607635: RNCC: 4 | RNVC: 1

20 Jul 2006

5340-15-007-1770
Resilient Mount

150071770
1391016: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-171-6512
Staffa Icam Da Mt.1

151716512
C663R.180: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-152-9160
Staffa (1) Accessor

151529160
206021F91: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-137-2467
Fermaglio

151372467
769054-3: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-000-3553
Placca 6F Per Prese

150003553
6644 4 114-01503: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-15-112-8403
Headless Grooved Rod

151128403
471164: RNCC: 3 | RNVC: 2
D0471164: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-120-6391
Dust And Moisture Seal Protective Cap-Plug

151206391
D0467077: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-155-2415
Taxi L Fitting Assy

151552415
J52850750-406: RNCC: 3 | RNVC: 2

13 Feb 2002

5340-15-054-8556
Threaded End Tensioning Tie Rod

150548556
32-03-135: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-151-2655
Threaded End Tensioning Tie Rod

151512655
04685320: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-001-5912
Angle Bracket

150015912
504327591: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-065-0938
Metallic Seal

150650938
UNITEN5-16: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-102-4686
Rotating Shaft Eye Bracket

151024686
01-261-12-109: RNCC: 3 | RNVC: 2

30 Apr 1987

5340-15-065-7253
Piastra

150657253
109-0700-72-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-155-8272
Support Bracket

151558272
4133T06G01: RNCC: 3 | RNVC: 2
4133T06G01: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-156-2050
Flange

151562050
(241)A3460CBD71206P01: RNCC: 3 | RNVC: 2
CBD71206P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-217-5600
Taglia 160 (Carruco

152175600
EXRI7904642: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-202-3657
Staffetta Fissaggio

152023657
17314601: RNCC: 3 | RNVC: 2
(241)A424917314601: RNCC: 5 | RNVC: 2

28 Feb 2007

5340-15-193-9949
Sliding Door Hanger Section

151939949
109-0360-32-105: RNCC: 3 | RNVC: 2
(241)A0126109-0360-32-105: RNCC: 5 | RNVC: 2

12 Aug 2010

5340-15-117-4217
Turnbuckle Body

151174217
142514164: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-009-6387
Canalina Portacavi

150096387
167609G1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-062-8658
Anello Elastico Sic

150628658
0-30659: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-152-7440
Rim Clen Clamp (1)

151527440
21362012: RNCC: 3 | RNVC: 2
3136T2012: RNCC: 3 | RNVC: 2
(241)A361821362012: RNCC: 4 | RNVC: 1
3136G2012: RNCC: 5 | RNVC: 2

20 Oct 2000

5340-15-215-3564
Occhioli Per Tendit

152153564
OCCHIOLI: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-112-2931
Squadretta Speciale

151122931
277A6284-001: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-213-8764
Maniglione Antipani

152138764
941-1000-505: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-181-8275
Eye Door Latch

151818275
20365: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-152-6415
Seat Pipe Support

151526415
4130305035: RNCC: 3 | RNVC: 2
0-108389: RNCC: 5 | RNVC: 2
4130305035: RNCC: 5 | RNVC: 2

3 Oct 2000

5340-15-050-1538
Fascetta Complesso

150501538
7-4411-100-43466-2: RNCC: 3 | RNVC: 2
7-4411-1-00-43466-2: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-193-0715
Tirante

151930715
CSS-100-3: RNCC: 3 | RNVC: 2
(241)AA003CSS-100-3: RNCC: 5 | RNVC: 2

12 Apr 2010

5340-15-207-4128
Angle Bracket

152074128
260-05-129-01: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-143-2865
Dust And Moisture Seal Protective Plug

151432865
149069 FIND NO.101: RNCC: 3 | RNVC: 2
58100333: RNCC: 3 | RNVC: 2

10 Dec 1996

5340-15-178-4629
Snap-In Plain Standoff

151784629
8790/13/29 ITEM 8: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-215-2998
Spazzola Acciaio

152152998
ABC D4054/1-200: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-8771
Upper Movable Guide

151208771
518-04-0200: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-178-7418
Multiple Angle Bracket

151787418
032731: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-002-1438
Packaging Container Fastener

150021438
42566939: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-162-6542
Camma Complessivo

151626542
212-1300-22-1: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-15-188-9111
Staffa Supporto Mot

151889111
311075F91: RNCC: 3 | RNVC: 2
(241)A0106311075F91: RNCC: 5 | RNVC: 2

14 Dec 2009

5340-15-001-5507
Stand Base

150015507
182719596: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-206-9671
Collare

152069671
46307476: RNCC: 3 | RNVC: 2
(241)A293046307476: RNCC: 5 | RNVC: 2

2 Aug 2012

5340-15-007-3895
Rubber Bumper

150073895
1391230: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-101-2350
Asta

151012350
A222101: RNCC: 3 | RNVC: 2

1 Apr 1997

5340-15-211-8770
Perno Per Prolunga

152118770
NB1000: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-129-5163
Turnbuckle

151295163
570867: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-127-4536
Com Anello Di Gomma

151274536
851844: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-051-3755
Staffa

150513755
9913217: RNCC: 3 | RNVC: 2
9913217: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-166-5165
Lucchetto Viro Mm 5

151665165
LUCCHETT0VIR0MM50: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-105-8182
Sostegno Elastico

151058182
002.2744.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-2034
Supporto Serbatoio

151032034
DE160.02.113: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-053-4858
Fascetta Completa

150534858
204-4352-2-7: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-201-8169
Manual Control Handle

152018169
50240: RNCC: 3 | RNVC: 2
(241)A348850240: RNCC: 5 | RNVC: 2

17 Dec 2006

5340-15-207-8387
Manual Control Handle

152078387
GN.10425: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-153-4024
Elettro-Me Raccordo

151534024
5137-351-12: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-193-1596
Angle Bracket

151931596
504155062: RNCC: 3 | RNVC: 2
(241)A4249504155062: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-074-4283
Turnbuckle

150744283
2A10UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-219-8023
Flangia Per Tubi

152198023
759MINUTEX: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-177-6375
Adapter

151776375
A19437: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-156-6116
Paracolpo In Gomma

151566116
T124: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-207-0197
Stand Base

152070197
N523U1013201: RNCC: 3 | RNVC: 2

8 Aug 2012

5340-15-003-2939
Metalinc 206 Runner

150032939
9819648: RNCC: 3 | RNVC: 2

31 Oct 2013

5340-15-006-2742
Maniglia Speciale

150062742
0-33921: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-151-9609
Tirante

151519609
0-172683: RNCC: 3 | RNVC: 2

27 Jul 2000

5340-15-135-6924
Soffietto Di Protez

151356924
205-030-196-9: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-15-179-8061
Filing Fitting

151798061
6-05-024: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-001-8016
Dust And Moisture Seal Protective Cap

150018016
5949783335: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-187-7168
Spring Loaded Cylinder Fastener

151877168
GN 612-10-M16X1.5-AK-NI: RNCC: 3 | RNVC: 2

4 May 2009

5340-15-205-2702
Angle Bracket

152052702
504082780: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-066-0371
Cover Plate Access

150660371
1127-04-226: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-142-6615
Tirante

151426615
541-21-1970: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-193-1341
Cover

151931341
00233R0820: RNCC: 3 | RNVC: 2
23382: RNCC: 3 | RNVC: 2
7723382: RNCC: 3 | RNVC: 2
ED233R-082-S: RNCC: 5 | RNVC: 2
23382: RNCC: 5 | RNVC: 9
7723382: RNCC: 5 | RNVC: 9

19 Apr 2010

5340-15-170-8265
Nottolino Esterno P

151708265
340-5425/02: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-006-9031
Fascia Di Fissaggio

150069031
39A721-12-12: RNCC: 3 | RNVC: 2

30 May 1980

5340-15-116-8476
Control Rod

151168476
D0369523: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-117-1968
Pad Eye

151171968
190518180: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-123-7103
Morsetto Per Orolog

151237103
3324: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-138-2885
Serratura Completa

151382885
57251-60: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-114-1176
Pistra Speciale

151141176
8242.10.01: RNCC: 3 | RNVC: 2

11 Dec 1992

5340-15-219-2311
Snap Hook

152192311
4752730000D: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-124-1738
Coperture Di Plasti

151241738
31-925/1: RNCC: 3 | RNVC: 2
31-925/1: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-237-3154
Ritegno Cavi

152373154
323400: RNCC: 3 | RNVC: 2
534015E132208: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-213-8815
Serratura Da Infila

152138815
704-80-2-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-215-4667
Secchio Misurino Re

152154667
MISURINORECIPIENTE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-142-6907
Coperchio

151426907
31-953/157: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-195-2241
Breather Oil

151952241
71590: RNCC: 3 | RNVC: 2
10/906509: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-001-8572
Molla Cilindro

150018572
AC100-129: RNCC: 3 | RNVC: 2
AC100-129: RNCC: 5 | RNVC: 9

10 Apr 1974

5340-15-116-0357
Punta Filettata Spe

151160357
1"-BZN-TIG: RNCC: 3 | RNVC: 2

7 Oct 1994

5340-15-200-6439
Dust And Moisture Seal Protective Cap-Plug

152006439
RE60084: RNCC: 3 | RNVC: 2
(241)ACA64RE60084: RNCC: 5 | RNVC: 2

15 Feb 2006

5340-15-103-0748
Dust And Moisture Seal Protective Cap-Plug

151030748
DE013.10.064: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-202-7063
Helical Compression Spring Seat

152027063
50920: RNCC: 3 | RNVC: 2

24 Jun 2007

5340-15-136-2594
Supporto

151362594
7570503: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-213-8457
Incontro Per Asta C

152138457
MA4407: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-198-9129
Handwheel

151989129
26HJ04143051S01-469/1: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-15-142-5256
Pomolo

151425256
AT672-M.AS.: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-106-2028
Comando Impugnatura

151062028
3-118: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-040-6753
Vite Di Regolazione

150406753
5-1737-201-31190: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-103-8195
Accesso C Coperchio

151038195
05105-001B1: RNCC: 3 | RNVC: 2

10 Feb 1988

5340-15-116-9759
Gyro Assy

151169759
W018940: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-151-9358
Staffa

151519358
0-171319: RNCC: 3 | RNVC: 2
00171319: RNCC: 3 | RNVC: 2
(241)A39630-171319: RNCC: 5 | RNVC: 2
1PA39630-171319: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-068-2711
Collaudi Fissaggio

150682711
7100-8546-007: RNCC: 3 | RNVC: 2
82-01516: RNCC: 5 | RNVC: 2

22 Apr 1986

5340-15-166-5078
Disk

151665078
31627001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-158-6150
Semicerniera

151586150
122644299: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-110-3504
Gewindestueck

151103504
F407A3A6: RNCC: 3 | RNVC: 2
F407A3A6: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-186-3834
Cilindro Omec Con S

151863834
140.03: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-060-8235
Rim Clen Clamp (1)

150608235
000200137300: RNCC: 5 | RNVC: 2
000200137300: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-178-9981
Bracket Assembly

151789981
RS 407 628 -U: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-154-5064
Staffa (1) Accessor

151545064
1R 548231: RNCC: 3 | RNVC: 2
1R 548231: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-141-7463
Anodo

151417463
PL1161/29: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-122-3350
Sede Per Molle

151223350
263A1033-001: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-151-9445
Double Angle Bracket

151519445
0-174637: RNCC: 3 | RNVC: 2
00174637: RNCC: 3 | RNVC: 2
(241)A39630-174637: RNCC: 5 | RNVC: 2
1PA39630-174637: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-118-3897
Double Angle Bracket

151183897
60168924: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-104-8873
Fissaggio Gaffetta

151048873
606275: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-179-4395
Dust And Moisture Seal Protective Cap

151794395
46183014: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-124-8110
Blocchetto

151248110
93933931: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-186-8058
Sleeve

151868058
NTA13856A8RG115: RNCC: 3 | RNVC: 2
NTA13856A8RG115: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-219-7682
Duplicato Chiave

152197682
DUPLICATOCHIAVE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-166-5240
Sleeve

151665240
HELLATEMP3000: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-6109
Calotte

151186109
73129166: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-202-7826
Protect Blank Panel

152027826
N651U3131201: RNCC: 3 | RNVC: 2
(241)A0126N651U3131201: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-15-175-9605
Cilindro Sagomato I

151759605
ART13: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-051-4173
Dente

150514173
745521: RNCC: 3 | RNVC: 2
745521: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-005-0468
Resilient Mount

150050468
0-33063: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-105-8954
Tirante A Teste Fil

151058954
9922713: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-185-5108
Collare Fissaggio T

151855108
511106: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-003-3811
Dust And Moisture Seal Boot

150033811
ED0021360530-S: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-000-9984
Bracket Assy

150009984
008A3677-401: RNCC: 3 | RNVC: 2

8 May 2013

5340-15-074-4321
Turnbuckle

150744321
1B80UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4168
Turnbuckle

150744168
1A20UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-220-5898
Cilindro Centrale

152205898
CILINDROCENTRALE: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-207-8614
Bumper

152078614
5801319062: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-074-4231
Turnbuckle

150744231
2C30UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-192-4827
Paracolpo Gomma

151924827
C50008: RNCC: 3 | RNVC: 2
(241)A0178C50008: RNCC: 5 | RNVC: 2

22 Mar 2010

5340-15-170-3595
Clip

151703595
206-031-427-15: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-158-5955
Turnbuckle Body

151585955
230923800: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-193-9214
Spring Tension Clip

151939214
109-0641-60-353: RNCC: 3 | RNVC: 2

28 Jul 2010

5340-15-156-7614
Taxi L Fitting Assy

151567614
J52850750-407: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-15-213-1707
Fascetta Autoblocca

152131707
FS390CWC: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-107-5709
Piastrina Di Sicure

151075709
DE013.13.133: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-193-3925
Piastra Di Montaggi

151933925
504304660: RNCC: 3 | RNVC: 2
(241)A4249504304660: RNCC: 5 | RNVC: 2

11 May 2010

5340-15-159-9727
Rubber Bumper

151599727
122603499: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-110-5353
Plugck

151105353
620.174: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-120-3375
Supporto Compressor

151203375
P80400/2: RNCC: 3 | RNVC: 2
80400: RNCC: 3 | RNVC: 2
8197141: RNCC: 5 | RNVC: 2
80400: RNCC: 5 | RNVC: 9
P80400/2: RNCC: 5 | RNVC: 9

30 Mar 1995

5340-15-007-9593
Nut And Bolt Locking Plate

150079593
1398436: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-193-1456
Access Door Locking Ring

151931456
504122913: RNCC: 3 | RNVC: 2
(241)A4249504122913: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-157-6175
Manual Control Lever

151576175
11032183: RNCC: 3 | RNVC: 2
(241)A977211032183: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-179-0486
Front Cover

151790486
20132183: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-15-003-1510
Multiple Angle Bracket

150031510
5949789181: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-009-6386
Curva Canalina Port

150096386
159332G1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-204-1810
Preassieme Piastrin

152041810
195531819: RNCC: 3 | RNVC: 2
(241)A0199195531819: RNCC: 5 | RNVC: 2

21 Sep 2011

5340-15-155-0947
Nut And Bo Retainer

151550947
J57150565-003: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-15-112-0531
Dispositivo Di Supp

151120531
244A1180-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-137-3515
Escutcheon Plate

151373515
B230172: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-106-2291
Smorzatore Vibrazio

151062291
12.500.242: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-177-4896
Sliding Shoe

151774896
D1419880: RNCC: 3 | RNVC: 2
(241)A0461D1419880: RNCC: 5 | RNVC: 2

27 Aug 2004

5340-15-122-2742
Caoutchouc Phare

151222742
800050808: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-001-8490
Unavailable

150018490
ED0036300040-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-001-8489
Unavailable

150018489
ED0036170200-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-179-1658
Flange

151791658
RS 404 826 A: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-141-1202
Tassello Con Vite I

151411202
1910: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-236-9692
Pomello In Ottone

152369692
2312: RNCC: 3 | RNVC: 2
534015E080335: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-169-5432
Lucchetto Sg

151695432
F72013881: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-122-9226
Inserto

151229226
80-005-1-6: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-050-0488
Nut And Bolt Retainer

150500488
23033-10: RNCC: 3 | RNVC: 2
23033-10: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-109-9235
Manigliettadiestraz

151099235
4-39892.0000//A: RNCC: 5 | RNVC: 2
4-39892.0000//A: RNCC: 5 | RNVC: 9

30 Jan 1988

5340-15-151-6944
Mensola

151516944
0-159710: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-001-8021
Angle Bracket

150018021
500403015: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-111-3831
Cernierasagomataspe

151113831
117A2110-401: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-166-4835
Rh Flange

151664835
212030064032: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-207-5971
Dust And Moisture Seal Protective Cap-Plug

152075971
178905871: RNCC: 3 | RNVC: 2
(241)A3936178905871: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-202-8513
Corrosion Preventive Anode

152028513
V4200576: RNCC: 3 | RNVC: 2
(241)A4447V4200576: RNCC: 5 | RNVC: 2

25 Jul 2007

5340-15-194-4582
Turnbuckle

151944582
58.507.10: RNCC: 3 | RNVC: 2
(241)A492858.507.10: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-15-109-4697
Threaded End Tensioning Tie Rod

151094697
1Q 530096LA: RNCC: 3 | RNVC: 2
1Q 530096LA: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-064-9430
Collare

150649430
MC315-1-16/D: RNCC: 3 | RNVC: 2

28 Aug 1979

5340-15-119-6142
Electrical-Me Post

151196142
MA212-16/E: RNCC: 3 | RNVC: 2

14 Mar 1995

5340-15-187-4677
Angle Bracket

151874677
J28042156-001: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-15-192-7545
Circlip

151927545
CAT338: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-119-7559
Cover Assy

151197559
278195-G1: RNCC: 3 | RNVC: 2
278195-G1: RNCC: 5 | RNVC: 2
278195-G1: RNCC: 5 | RNVC: 9

17 Nov 1994

5340-15-118-0442
Coperchio Valvole

151180442
D0487146: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-105-8140
Turnbuckle Body

151058140
9820: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-6960
Pistoncino Per Valv

151206960
D0459061: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-160-0488
Padlock

151600488
F720110001: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-222-2284
Piastre Fissaggio

152222284
S1-110A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-128-1570
Molla Richiamo Pist

151281570
102-00-12-051-0014: RNCC: 3 | RNVC: 2
102-00-12-051-0014: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-213-8819
Maniglione Antipani

152138819
941-4000-504: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-186-3884
Staffe Di Scorrimen

151863884
STAFFA-GUARNIZIONI: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-153-9435
Soffietto Protezion

151539435
142061216: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-155-8270
Aiv Aft Bracket

151558270
4113T70G01: RNCC: 3 | RNVC: 2
4113T70G01: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-054-9941
Turnbuckle

150549941
01-231U57: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-004-4418
Doorstop

150044418
180-2573: RNCC: 3 | RNVC: 2

30 May 1978

5340-15-127-8191
Anello Elastico Arr

151278191
9906054: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-102-2184
Leva Compl.

151022184
109-0700-63-7: RNCC: 3 | RNVC: 2

16 Dec 1986

5340-15-058-6130
Resilient Mount

150586130
503-10-0427-004D: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-062-2034
Stopplate

150622034
P-892904-001: RNCC: 3 | RNVC: 2
P892904-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-118-6512
Carter De Protectio

151186512
70658265: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-153-3861
Portaspecchio Gsi

151533861
5137-292-22: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-151-8164
Dust And Moisture Seal Protective Cap

151518164
0-103464: RNCC: 3 | RNVC: 2
(241)A39630-103464: RNCC: 5 | RNVC: 2

13 Jul 2000

5340-15-186-4611
Inserto Croce Ph 2

151864611
6450210: RNCC: 3 | RNVC: 2
F3002/25C: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-045-2497
Control Rod

150452497
503-20-41: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-068-4370
Cerniera Speciale

150684370
SH 4408-401: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-170-8260
Piastrina Inferiore

151708260
340-4413/01.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-063-9915
Cover Plate Access

150639915
1355-09-140: RNCC: 3 | RNVC: 2

16 Dec 1983

5340-15-120-6949
Coperchio In Plasti

151206949
D0467047: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-122-2952
Tampon Caoutchouc

151222952
800079458: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-154-7222
Resilient Mount

151547222
157632226: RNCC: 2 | RNVC: 3

8 Aug 2001

5340-15-209-0784
Fissaggi Univensali

152090784
0453: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-100-5558
Tenditore Complessi

151005558
KB642-12-01B: RNCC: 3 | RNVC: 2

11 Mar 1987

5340-15-170-3407
Plate Assembly

151703407
212-075-277-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-110-6346
Angle

151106346
P050575-001: RNCC: 3 | RNVC: 2
P-050575-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-138-3090
Tassello

151383090
14219390: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-151-4583
Fissaggio Cacciavit

151514583
UOHF0160000: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-104-3125
Copiglia Elastica

151043125
8801244: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-153-7339
Piastra Bloccaggio

151537339
142057123: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-218-7096
Punti Per Spillatri

152187096
PUNTIMM8: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-064-9081
Resilient Mount

150649081
160055: RNCC: 3 | RNVC: 2

19 Jun 1984

5340-15-106-4774
Piastrina Sicurezza

151064774
8528633: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-113-2449
Protezionecablaggic

151132449
277A1636-403: RNCC: 3 | RNVC: 2

13 Apr 1991

5340-15-118-0513
Coperchio Distribut

151180513
D0488475: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-116-9762
Inner Shaft Assembl

151169762
W018289: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-213-8782
Scatola Copriserrat

152138782
446IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-112-1366
Coperchio

151121366
DE013.15.300: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-15-103-4096
Disc

151034096
276983ART36: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-178-7335
Clevis And U-Bolt

151787335
12.002: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-005-6525
Coperchio Speciale

150056525
0-31501: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-107-2580
Shock Mount Pad

151072580
5194-211-02: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-4345
Turnbuckle

150744345
2B8UNI20200T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-005-6430
Anello Speciale

150056430
0-15871: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-219-8852
Anchor Strap

152198852
CM.2,5XM.4,5-CON ANELLO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-233-1430
Lucchetto Mm.50 "Co

152331430
L010.50.00: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-15-102-6246
Dispositivo Di Bloc

151026246
EN2546C10: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-15-219-7907
Kit Viteria Di Fiss

152197907
VIT.FISS.: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-045-1496
Control Rod

150451496
501-13-05: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-147-3507
Locking Plate

151473507
291C01230-101: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-108-1058
Ausgleichsgew

151081058
X667-12: RNCC: 3 | RNVC: 2
X667-12: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-065-9532
Dust And Moisture Seal Protective Cap

150659532
65110070: RNCC: 3 | RNVC: 2

29 Oct 1982

5340-15-184-6171
Lucchetto

151846171
NSN534015R516897: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-185-6082
Rullo Guida Superfo

151856082
463IBFM: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-147-0037
Tacchetto Di Guida

151470037
HTR248: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-15-147-3076
Bracket

151473076
302957: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-103-2028
Traversa

151032028
DE160.02.093: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-001-8446
Bracket

150018446
ED00858R0940-S: RNCC: 3 | RNVC: 2
ED00858R0940-S: RNCC: 5 | RNVC: 2
CV173893: RNCC: 5 | RNVC: 2

16 Jul 2013

5340-15-119-5404
Asta Per Guida Di O

151195404
D0484492: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-074-4272
Turnbuckle

150744272
1A52UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-157-6195
Access Door

151576195
11031603: RNCC: 3 | RNVC: 2
(241)A977211031603: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-002-0421
Molla

150020421
839749: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-138-8072
Snap Hook

151388072
IMI-2-611-1: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-213-8763
Cilindro Da Infilar

152138763
8350-27-27-7: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-154-1129
Piastrina Speciale

151541129
0-169920: RNCC: 3 | RNVC: 2
1PA39630-169920: RNCC: 5 | RNVC: 2
(241)A39630-169920: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-066-1558
Hinge

150661558
P-893065-001: RNCC: 3 | RNVC: 2
P893065-001: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-193-8135
Draining Cap

151938135
SPE-J-943-A-9001/050N: RNCC: 3 | RNVC: 2
(241)A0019SPE-J-943-A-9001/050N: RNCC: 5 | RNVC: 2

19 Jul 2010

5340-15-166-5125
Tassello 'N' 8X80 C

151665125
N8080: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-049-6474
Anello Di Arresto

150496474
6-0599-101-43134: RNCC: 3 | RNVC: 2
6-0599-1-01-43134: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-127-3760
Bottone Comando Arr

151273760
1357-63-012: RNCC: 3 | RNVC: 2
1357-63-012: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-195-1848
Strap Fastener Loop

151951848
999-0500-57-12: RNCC: 2 | RNVC: 2

7 Mar 2011

5340-15-198-5493
Multiple Angle Bracket

151985493
4111T05G01: RNCC: 3 | RNVC: 2
(241)A34604111T05G01: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-15-130-8128
Handwheel

151308128
18438: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-201-9758
Riparo

152019758
79114435: RNCC: 3 | RNVC: 2
(241)AD75179114435: RNCC: 5 | RNVC: 2
79114435: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-15-049-3548
Distanziale

150493548
7-6117-6-01-36294: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-063-1013
Piastrina Ritegno C

150631013
SF260-13-46-11: RNCC: 3 | RNVC: 2
SF260-13-46-11: RNCC: 5 | RNVC: 9

23 Nov 1982

5340-15-144-7726
Flange

151447726
518-02-2950: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-000-7786
Corrosion Preventive Anode

150007786
3025-129: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-15-154-1319
Striscia

151541319
39A832-12-02-05: RNCC: 3 | RNVC: 2

22 Mar 2001

5340-15-203-8546
Anode Retaining Plug

152038546
410-027-003: RNCC: 3 | RNVC: 2
(241)A1823410-027-003: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-180-3952
Corrosion Preventive Anode

151803952
5852523601MM: RNCC: 3 | RNVC: 2
(241)A31215852523601MM: RNCC: 5 | RNVC: 2

8 May 2008

5340-15-195-2208
Utility Resilient Mount

151952208
309501035: RNCC: 3 | RNVC: 2
309501035: RNCC: 5 | RNVC: 2
CV173724: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-217-6891
Impugnatura Express

152176891
M600: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-060-6619
Cerniera Superiore

150606619
1971TAV69-22PART1SINISTRA: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-117-1971
Rubber Bumper

151171971
190520130: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-112-5720
Handle

151125720
A303732: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-179-6070
Dust And Moisture Seal Protective Cap-Plug

151796070
0.009.0210.0/10: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-15-156-3926
Base

151563926
(241)A3460CBD70796P01: RNCC: 3 | RNVC: 2
CBD70796P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-203-7201
Cap

152037201
58100346: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-15-181-0706
Case Structur Guide

151810706
N925G1437201: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-15-181-1167
Head

151811167
D0407142: RNCC: 3 | RNVC: 2
(241)A4912D0407142: RNCC: 5 | RNVC: 2

29 Oct 2008

5340-15-189-3117
Oscuratore

151893117
112709365: RNCC: 3 | RNVC: 2

11 Feb 2010

5340-15-120-6813
Canotto Con Segnala

151206813
D0487325: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-115-7117
Flangia Tubo Misura

151157117
D0468849: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-166-4974
Pivot

151664974
14X130122UNI170788: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-195-4133
Cinghia

151954133
200800007.15400: RNCC: 3 | RNVC: 2
(241)A6114200800007.15400: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-138-2882
Lucchetto Mm.70

151382882
22013-70: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-105-6024
Staffa A Gomito

151056024
10282: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-060-0983
Headless Grooved Rod

150600983
05234-101A1: RNCC: 3 | RNVC: 2

8 Dec 1976

5340-15-206-8447
Sliding Door Track Bracket

152068447
9817 6966: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-148-0468
Dust And Moisture Seal Protective Plug

151480468
103831: RNCC: 3 | RNVC: 2

16 Jun 1998

5340-15-163-1056
Manual Control Handle

151631056
R035.15: RNCC: 3 | RNVC: 2
R035.15: RNCC: 5 | RNVC: 9

1 Jul 2002

5340-15-058-4092
Nut And Bolt Retainer

150584092
553826116000: RNCC: 2 | RNVC: 3
538-26-1160: RNCC: 3 | RNVC: 2
4MC037-17: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-007-0259
Half Hinge

150070259
P-883723-001: RNCC: 3 | RNVC: 2
P883723-001: RNCC: 5 | RNVC: 2

20 Nov 1979

5340-15-151-7564
Stop Assembly

151517564
J52850300-404: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-188-5201
Terminale Di Battut

151885201
FLC-TBT: RNCC: 3 | RNVC: 2
(241)AC839FLC-TBT: RNCC: 5 | RNVC: 2

30 Sep 2009

5340-15-215-0317
Fascetta Per Cablag

152150317
L6653/2-450: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-192-0809
Ventosa Sollevament

151920809
15-K188B: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-178-5546
Bracket

151785546
695428: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-201-5097
Dust And Moisture Seal Protective Cap

152015097
67328-11/001: RNCC: 3 | RNVC: 2

3 Oct 2006

5340-15-170-8576
Lastra 506X357x0.8

151708576
58311-11/051: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-105-1181
Porta Pomello

151051181
E-6000-1134: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-157-5310
Resilient Mount

151575310
10033-4: RNCC: 2 | RNVC: 3

19 Sep 2003

5340-15-109-7376
Control Rod

151097376
9459: RNCC: 3 | RNVC: 2
8190244: RNCC: 5 | RNVC: 2

23 Oct 1988

5340-15-217-9856
Ruota Piroettante

152179856
RUOTA125MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-137-1069
Fascetta

151371069
73858: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-142-3216
Porta Molla

151423216
G.74519-13: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-009-3596
Threaded End Tensioning Tie Rod

150093596
1376-55-111: RNCC: 3 | RNVC: 2
137655111: RNCC: 5 | RNVC: 2

5 Apr 1994

5340-15-153-5023
Half Hinge

151535023
J57140704-002: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-176-6145
Disco Per Circolare

151766145
300X3,2X30M: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-156-3693
Oil Filter Plug

151563693
(241)A3460CBD71341G01: RNCC: 3 | RNVC: 2
CBD71341G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-166-5138
Supporto Per Anelli

151665138
7896G22X20: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-156-1084
Montante

151561084
N636G1006101: RNCC: 3 | RNVC: 2

22 Nov 2002

5340-15-139-3491
Tirante 254

151393491
2492861: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-220-2594
Confezione Da 50 Ta

152202594
ART.8702255: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-121-9022
Cerniera Inferiore

151219022
142502958: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-136-3090
Staffa

151363090
4608561: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-157-9832
Hinge Assy

151579832
J94345411-401: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-055-8674
Profilato Di Serrag

150558674
260-13-16-9: RNCC: 3 | RNVC: 2
260-13-16-9: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-110-8003
Supportorigido

151108003
66705-101A01: RNCC: 3 | RNVC: 2
66705-101A1: RNCC: 5 | RNVC: 2

29 Jul 1990

5340-15-113-9696
Supportospeciale

151139696
252A3093-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-153-4016
Elettro-Me Raccordo

151534016
5137-308-13: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-151-4758
Double Angle Bracket

151514758
0-150403: RNCC: 3 | RNVC: 2
00150403: RNCC: 3 | RNVC: 2
1PA39630-150403: RNCC: 5 | RNVC: 2
(241)A39630-150403: RNCC: 5 | RNVC: 2

30 May 2000

5340-15-040-6808
Fascetta

150406808
7-4411-300-28385-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-166-4747
Cover (Complete Wit

151664747
A130163100: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-195-0161
Lpt Blade Base Assy

151950161
CBD71190G02: RNCC: 3 | RNVC: 2
(241)A3460CBD71190G02: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-135-9977
Mandle

151359977
XH100: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-136-1020
Supporto Blocchetto

151361020
V3SD15422: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-114-0851
Resilient Mount

151140851
107640-0000: RNCC: 3 | RNVC: 2

22 Apr 1992

5340-15-149-6087
End Stop

151496087
518-04-2490: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-110-2894
Bracket Fue

151102894
P120085-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-022-6932

5340-15-014-1706

5340-15-157-9878
Half Hinge

151579878
J94344042-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-212-5976
Rotella A Sfera

152125976
RS687-708: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-144-9375
Squadretta Sinistra

151449375
277A6085-003: RNCC: 3 | RNVC: 2

10 Feb 1997

5340-15-148-9441
Speciale Coperchio

151489441
2302-0078-001: RNCC: 3 | RNVC: 2

5 Nov 1998

5340-15-201-4535
An Bracket Assembly

152014535
212-1135-17-104: RNCC: 3 | RNVC: 2
(241)A0126212-1135-17-104: RNCC: 5 | RNVC: 2

18 Sep 2006

5340-15-155-1648
Turnbuckle

151551648
44200000090/04: RNCC: 2 | RNVC: 3

23 Jan 2002

5340-15-149-3715
Block

151493715
518-02-1400: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-207-6985
Extension Drawer Slide

152076985
SLD/500.1243: RNCC: 3 | RNVC: 2
(241)A3028SLD/500.1243: RNCC: 5 | RNVC: 2

12 Nov 2012

5340-15-110-2202
Seat Pipe Support

151102202
62937-002A01: RNCC: 3 | RNVC: 2
62937-002A1: RNCC: 5 | RNVC: 2

9 Jul 1990

5340-15-177-5801
Handwheel

151775801
VC254/60B-M12: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-007-0160
Mancetta

150070160
9103-11: RNCC: 3 | RNVC: 2

24 Jan 1980

5340-15-000-4356
Corrosion Preventive Anode

150004356
30315007089: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-170-0400
Lucchetto Sargent

151700400
F72020973: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-121-5760
Sadd Pipe Support

151215760
1R 514234: RNCC: 3 | RNVC: 2
1R 514234: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-119-6391
Dust And Moisture Seal Protective Cap-Plug

151196391
60151069: RNCC: 3 | RNVC: 2

6 Oct 1994

5340-15-153-0073
Tappo Reggianodo

151530073
313055F01: RNCC: 3 | RNVC: 2

14 Nov 2000

5340-15-120-7513
Sportello Di Access

151207513
109-0640-51-142: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-149-4349
Trapezio Inf. Sospe

151494349
51350-S10-G00: RNCC: 3 | RNVC: 2

1 Mar 1999

5340-15-117-4873
Guida Vetro Scorrev

151174873
26191-002D00: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-15-112-1146
Sostegnoe

151121146
H63-146-54-64-8MM: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-064-6543
Set Of Hoising Grip

150646543
68787-98/008: RNCC: 3 | RNVC: 2

9 May 1984

5340-15-222-2261
Trave Tetto U 200X7

152222261
S1-142B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-182-8621
Tasselli Fischer

151828621
FISCHERCHIUSO: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-211-3477
Punta Per Saldatore

152113477
7/00580: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-100-5685
Rubber Bumper

151005685
488316: RNCC: 3 | RNVC: 2
D0488316: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-187-2283
Assieme Supporto Pi

151872283
A18387: RNCC: 3 | RNVC: 2
(241)A7904A18387: RNCC: 5 | RNVC: 2

26 Feb 2009

5340-15-179-9412
Hub

151799412
504226866: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-205-7778
Assieme Contatto

152057778
182724053: RNCC: 3 | RNVC: 2
(241)A0199182724053: RNCC: 5 | RNVC: 2

3 Apr 2012

5340-15-108-8928
Control Rod

151088928
82207: RNCC: 3 | RNVC: 2
4696892: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-110-1582
Tacchettofilettato

151101582
1455-10-132: RNCC: 3 | RNVC: 2

30 Jan 1990

5340-15-151-9090
Shock Mount Pad

151519090
2544-000012: RNCC: 3 | RNVC: 2

24 Jul 2000

5340-15-067-9453
Portella

150679453
53.032: RNCC: 3 | RNVC: 2
53.032: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-180-5955
Tacco

151805955
122650330: RNCC: 3 | RNVC: 2

24 Jun 2008

5340-15-157-9879
Half Hinge

151579879
J94344043-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-151-9787
Bolt And Spacer Kit

151519787
740-100-082: RNCC: 3 | RNVC: 2

31 Aug 2000

5340-15-062-4711
Eye End Alignment

150624711
MRA818-403: RNCC: 3 | RNVC: 2

5 Apr 1982

5340-15-049-7525
Fascetta

150497525
AB47-706-217-15: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-103-2358
Handle Assembly

151032358
SF260-14-29-1: RNCC: 3 | RNVC: 2
SF260-14-29-1: RNCC: 5 | RNVC: 9

19 Jul 1988

5340-15-158-2739
Connector Case

151582739
99UJ04543298S01-401/028: RNCC: 5 | RNVC: 9

7 Jan 2004

5340-15-055-5384
Compasso Per Porte

150555384
1971TAV89-3: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-142-3674
Maniglia

151423674
MS137-0061-05: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-205-7168
Anello Di Sicurezza

152057168
5340159950049: RNCC: 3 | RNVC: 2
(241)A88205340159950049: RNCC: 5 | RNVC: 2

28 Mar 2012

5340-15-102-4490
Chiavistello Specia

151024490
263A1519-403: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-15-101-7417
Speciale Tenditore

151017417
1371CE/01/59: RNCC: 3 | RNVC: 2

14 Nov 1986

5340-15-107-1861
Strip Support

151071861
C7311-W4-C1: RNCC: 3 | RNVC: 2
C7311-W4-C1: RNCC: 5 | RNVC: 2
C7311-W4-C1: RNCC: 5 | RNVC: 9

10 Apr 1989

5340-15-199-5882
Anello

151995882
M2VA90S/24: RNCC: 3 | RNVC: 2
(241)A5205M2VA90S/24: RNCC: 5 | RNVC: 2

4 May 2005

5340-15-117-7146
Sadd Pipe Support

151177146
1Q 519401: RNCC: 3 | RNVC: 2
1Q 519401: RNCC: 5 | RNVC: 9

17 Jan 1995

5340-15-155-4906
Protection Air Ring

151554906
CBD71193P01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-154-4240
Access Door

151544240
219AS2903-800: RNCC: 3 | RNVC: 2

23 May 2001

5340-15-232-2014
Portagomma Maschio

152322014
17.306.00: RNCC: 3 | RNVC: 2
534015E151335: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-203-4475
Paracolpo Gomma

152034475
N523G5401201: RNCC: 3 | RNVC: 2
(241)A0126N523G5401201: RNCC: 5 | RNVC: 2

3 Feb 2008

5340-15-149-5973
Bracket

151495973
1230-32-034: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-166-4978
Insert

151664978
2640787: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-103-2068
Piastrina Di Sicure

151032068
L6330062: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.137: RNCC: 5 | RNVC: 2
DE160.03.137: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-174-7595
Film Dist.Pacothane

151747595
63230-01/001: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-077-3805
Handwheel

150773805
FH158: RNCC: 3 | RNVC: 2
FH158-146: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-212-0433
Morsetto Pol0 Negat

152120433
01-2207: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-141-4574
Tappo

151414574
VSR1: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-194-3795
Assy Bracket

151943795
109-0709-94-101: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-107-4329
S Serie Guarnizioni

151074329
12032017: RNCC: 3 | RNVC: 2
12032017: RNCC: 5 | RNVC: 9

19 Jun 1988

5340-15-118-6488
C Bride De Fixation

151186488
75207997: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-185-6368
Chiavistello In Acc

151856368
COM-620: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-152-3528
Double Angle Bracket

151523528
0-171119: RNCC: 3 | RNVC: 2
00171119: RNCC: 3 | RNVC: 2
(241)A39630-171119: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-055-8287
Maniglia

150558287
330-0059-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-9891
Shank

151079891
141-1312/11: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-113-1710
Threaded End Tensioning Tie Rod

151131710
324A2045-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-054-7939
Threaded End Tensioning Tie Rod

150547939
32-04-233: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-111-5966
Guide

151115966
A05645-01-24: RNCC: 3 | RNVC: 2
A05645-01-24: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-119-8490
Cartouche

151198490
2428-10: RNCC: 3 | RNVC: 2
85-618-3440: RNCC: 6 | RNVC: 9

17 Nov 1994

5340-15-221-9786
Molla Passacavi Da

152219786
4219-15: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-202-4554
Derivazione

152024554
04053: RNCC: 3 | RNVC: 2
(241)A553604053: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-117-0510
Feeding Sleeve

151170510
492181: RNCC: 3 | RNVC: 2
D0492181: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-211-5227
Clamp Loop

152115227
482496-1: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-004-3865
Double Angle Bracket

150043865
0-33434: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-109-9148
Electronic Equipment Hardware Kit

151099148
3-56549.0000//A: RNCC: 5 | RNVC: 2
3-56549.0000//A: RNCC: 5 | RNVC: 9

8 Jan 1998

5340-15-108-0694
Fixture

151080694
0M138281-001: RNCC: 5 | RNVC: 2
0M138281-001: RNCC: 5 | RNVC: 9
0M138281-001: RNCC: 5 | RNVC: 9

7 Sep 1989

5340-15-103-2026
Chiusura Per Portar

151032026
DE160-02-091: RNCC: 3 | RNVC: 2
DE160.02.091: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-005-6537
Anello Speciale

150056537
0-31496: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-166-4916
Serratura Fascia 2

151664916
4446080: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-155-4907
Lpt Roto Protection

151554907
CBD71277P01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-136-1021
Blocchetto Frenante

151361021
V3SD18101-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-061-5968
Double Angle Bracket

150615968
P13543-002: RNCC: 3 | RNVC: 2

2 Feb 1978

5340-15-068-9678
Supporto Rullo Tras

150689678
553207019000: RNCC: 2 | RNVC: 3
32-07-019: RNCC: 3 | RNVC: 2

2 Mar 1995

5340-15-003-8869
Dust And Moisture Seal Protective Cover

150038869
182713016: RNCC: 3 | RNVC: 2
(241)A0199182713016: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-060-8461
Electrical-Me Post

150608461
F400D20-01: RNCC: 3 | RNVC: 2
F400D-20-01: RNCC: 5 | RNVC: 2
F400D-20-01: RNCC: 5 | RNVC: 2

20 May 1977

5340-15-001-8570
Molla

150018570
AC100-137: RNCC: 3 | RNVC: 2
AC100-137: RNCC: 5 | RNVC: 9

10 Apr 1974

5340-15-178-5406
Nut And Bolt Retainer

151785406
1K.507247024: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-009-1768
Pad Eye

150091768
4606201: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-106-0075
Piastra Bloccaggio

151060075
2054923: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-213-8832
Chiave A Maniglia E

152138832
940-1-100-5T: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-102-2841
Supporto

151022841
75.16: RNCC: 3 | RNVC: 2

8 Dec 1986

5340-15-153-7357
Rubber Bumper

151537357
142057209: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-166-5028
Cap

151665028
FG797050800: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-158-5886
Resilient Mount

151585886
122621072: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-148-8721
Assieme Guida

151488721
2211-T002-001: RNCC: 3 | RNVC: 2

20 Oct 1998

5340-15-107-8485
Corredo Di Parti

151078485
104-3004-014: RNCC: 3 | RNVC: 2

1 Mar 1988

5340-15-009-2611
Semicerniera

150092611
P882742-001: RNCC: 3 | RNVC: 2

20 Aug 1980

5340-15-213-8818
Maniglione Antipani

152138818
941-2000-505: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-186-8339
Eye Tie-Rod

151868339
UNI6058-A2M10X80: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-120-6946
Battente A Pistonci

151206946
D0467080: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-179-3101
Control Rod

151793101
0.275.4344.0/20: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-105-8507
Double Angle Bracket

151058507
22234: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-185-7110
Ruota Girevole

151857110
657603: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-008-9998
Ritegno Trasparente

150089998
109-0310-27-19: RNCC: 3 | RNVC: 2

11 Jun 1981

5340-15-166-4997
Hinge Half

151664997
216A8006003: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-211-3480
Avvolgicavo

152113480
6/00500: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-206-2608
Key Blank

152062608
DOM-DM101: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-153-5025
Half Hinge

151535025
J57140702-001: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-157-9809
Hinge Assy

151579809
J94345331-401: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-001-8491
Unavailable

150018491
ED0036301780-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-005-6915
Tappo Speciale

150056915
0-33696: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-198-7708
Resisliente

151987708
DPN60: RNCC: 3 | RNVC: 2

16 Nov 2004

5340-15-112-9765
Handwheel

151129765
6204010: RNCC: 3 | RNVC: 2

8 Mar 1991

5340-15-052-0183
Morsetto Serratubi

150520183
M740-20-14: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-202-8535
Rod

152028535
J28040665-001: RNCC: 3 | RNVC: 2

26 Jul 2007

5340-15-066-0039
Helical Compression Spring Seat

150660039
2402-154: RNCC: 3 | RNVC: 2

10 Oct 1985

5340-15-108-0805
Metal Runner

151080805
32-08-165: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-195-7641
Rullo Sostegno Nast

151957641
A.3.3.11.031: RNCC: 3 | RNVC: 2
(241)A3917A.3.3.11.031: RNCC: 5 | RNVC: 2

9 May 2011

5340-15-134-6196
Staffa Posteriore P

151346196
4424643: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-106-5597
Blocchetto Fissaggi

151065597
0-48348: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-006-2649
Anello Speciale

150062649
0-11006: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-191-8181
Tassello Acciaio Pi

151918181
6 MM.: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-106-0399
Colonnetta

151060399
503-03-0908: RNCC: 5 | RNVC: 2
503-03-0908: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-053-5998
Piastrina Per Presa

150535998
45-1934-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-198-2443
Nut And Bolt Retainer

151982443
J57150177-005: RNCC: 3 | RNVC: 2

9 Sep 2004

5340-15-153-3316
Threaded End Tensioning Tie Rod

151533316
230822203: RNCC: 3 | RNVC: 2
A12UNI2023-AQ34-673ZNNI: RNCC: 5 | RNVC: 2

14 Dec 2000

5340-15-054-9892
Ritegno Elastico

150549892
01-231U60: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-068-6225
Piastrina Speciale

150686225
2 186 0049A: RNCC: 3 | RNVC: 2

3 May 1983

5340-15-152-9481
Tenditore Speciale

151529481
48050000036/4: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-15-203-0385
Flangia

152030385
033090093: RNCC: 3 | RNVC: 2
(241)A5009033090093: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-121-7515
Montante Anteriore

151217515
741405: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-170-0255
Lucchetti A Comb.

151700255
F72020834: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-105-6015
Staffa A Gomito

151056015
752440: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-005-6476
Paraolio Speciale

150056476
0-25685: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-169-6718
Lucchetto S&G

151696718
F72017733: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-061-2340
Rim Clen Clamp (1)

150612340
000200291800: RNCC: 5 | RNVC: 2
000200291800: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-061-1754
Rim Clen Clamp (1)

150611754
000200164200: RNCC: 5 | RNVC: 2
000200164200: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-005-6108
Anello Di Rasamento

150056108
0-08116: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-110-2815
Plate 110X1

151102815
P135220-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-000-0261
Tampone Ammortizzat

150000261
HPI-0747/01: RNCC: 3 | RNVC: 2

22 Jan 2013

5340-15-102-1039
Cerniera Speciale

151021039
193-0484/29: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-222-2308
Montante Ipe 400 L

152222308
S1-134A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-053-4608
Distanziatore Per F

150534608
204-1300-21-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-220-1435
Tassello Ancora Con

152201435
TASSELLO-ANCORA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-026-5434

5340-15-116-1635
Anello Metallico

151161635
86424-101A01: RNCC: 3 | RNVC: 2
86424-101A1: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-15-178-5875
Turnbuckle

151785875
77-311-130: RNCC: 3 | RNVC: 2

17 Aug 2005

Load More Results