What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 67 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 67 of 72

5340-15-057-3800
Piastra

150573800
91943-7: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-105-6037
Staffa A Gomito

151056037
587458: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-230-1776
Plate

152301776
677419: RNCC: 3 | RNVC: 2
534015E149980: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-170-8143
Block

151708143
340-0757/03: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-005-5307
Double Angle Bracket

150055307
1026-02-135: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-111-7965
Double Angle Bracket

151117965
10268: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-068-3669
Helical Compression Spring Seat

150683669
OD143Z100: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-201-0421
Coperchio Di Protez

152010421
N632U6025201: RNCC: 3 | RNVC: 2
(241)A0126N632U6025201: RNCC: 5 | RNVC: 2

15 May 2006

5340-15-174-6608
Terminal Board Rear

151746608
9903905401: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-179-1650
Clamp Plate

151791650
RS 404 800: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-101-1608
Coperchio

151011608
500-4645-17: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-063-4538
Cover Plate Access

150634538
812-2: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-218-2740
Gancio Pannello For

152182740
B-10: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-210-5033
Premicarta Completo

152105033
EX5340RI2717679: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-222-2262
Trave Collegamento

152222262
S1-110: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-114-1779
Bouchon Huile

151141779
325-0105: RNCC: 3 | RNVC: 2

19 May 1992

5340-15-148-1562
Turnbuckle

151481562
98450773: RNCC: 3 | RNVC: 2

25 Jun 1998

5340-15-197-8781
Indicatore Di Livel

151978781
HFTX9: RNCC: 3 | RNVC: 2

24 May 2004

5340-15-125-3948
Maniglione Antipani

151253948
MANIGLIONE/ANTIPANICO: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-170-6769
Bracket

151706769
SF260-01-90-71: RNCC: 3 | RNVC: 2

5 May 2003

5340-15-106-9922
Contachilo Supporto

151069922
4243470: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-197-8631
Assieme Blocchetto

151978631
N523G5049101: RNCC: 3 | RNVC: 2

21 May 2004

5340-15-154-3034
Anodo Anticorrosion

151543034
1P 613424: RNCC: 3 | RNVC: 2
1P 613424: RNCC: 5 | RNVC: 9

20 Apr 2001

5340-15-200-7700
Resilient Mount

152007700
MG DNP 120: RNCC: 3 | RNVC: 2
(241)A4997MG DNP 120: RNCC: 5 | RNVC: 2

23 Feb 2006

5340-15-156-6038
Grooved Clamp Coupling Ferrule

151566038
748670: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-199-4905
Engine Accessory Bracket

151994905
313071F01: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-059-0279
Key Blank

150590279
NP17TDS: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-236-4131
Metro Rigido Doppio

152364131
U02236: RNCC: 3 | RNVC: 2
534015E909047: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-119-8579
Hinge

151198579
0815-05460: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-222-2294
Porta Roller Shutte

152222294
S1-13B6: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-194-4779
Turnbuckle

151944779
TS4/19/A01: RNCC: 3 | RNVC: 2
(241)AD889TS4/19/A01: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-15-170-8085
Coperchio Sup. Fora

151708085
340-0614/06: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-064-9424
Connessione

150649424
MC243-1-260/E: RNCC: 3 | RNVC: 2

28 Aug 1979

5340-15-062-6169
Rubber Bumper

150626169
P-894815-015: RNCC: 3 | RNVC: 2
P894815-015: RNCC: 5 | RNVC: 2

5 Apr 1982

5340-15-115-6860
Piston Connecting Rod

151156860
D1401162: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-15-005-4572
Dust And Moisture Seal Protective Cap

150054572
1137-15-158: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-203-6711
Clip Retaining Assy

152036711
095.01: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-063-6185
Eye Hook

150636185
4720469: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-120-6895
Coperchio Per Distr

151206895
D0471247: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-103-8642
Control Rod

151038642
7165230: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-117-1458
Manual Control Lever

151171458
16000A115300: RNCC: 5 | RNVC: 2
16000A115300: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-15-144-9163
Dust And Moisture Seal Protective Cap-Plug

151449163
60178468: RNCC: 3 | RNVC: 2

10 Feb 1997

5340-15-207-8366
Dust And Moisture Seal Protective Cap

152078366
2145.038: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-152-8893
Dust And Moisture Seal Protective Plug

151528893
190519164: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-116-4861
Double Angle Bracket

151164861
60165655: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-195-5418
Half-Hinge

151955418
109-0641-47-108: RNCC: 3 | RNVC: 2

4 Apr 2011

5340-15-055-8687
Semifascetta

150558687
260-13-28-15: RNCC: 3 | RNVC: 2
260-13-28-15: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-114-2388
Tirante

151142388
04-10-674-8: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-175-4575
Filetti Heli-Coil M

151754575
HELI-COIL6X1MM: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-179-8062
Fill Assembly

151798062
6-05-025: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-007-9982
Helical Compression Spring Seat

150079982
1361812: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-065-3896
Dust And Moisture Seal Protective Cap-Plug

150653896
463.013.043.4: RNCC: 3 | RNVC: 2
4630130434: RNCC: 5 | RNVC: 2
9980877: RNCC: 5 | RNVC: 2

17 Nov 1983

5340-15-127-6840
Molla Ruota

151276840
395190: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-184-6413
Serratura Tipo Yale

151846413
NSN534015R520506: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-127-5476
Staffetta Fiss.Tubi

151275476
882998: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-147-7194
Batte Sump Assembly

151477194
UA59012-01: RNCC: 3 | RNVC: 2

12 Mar 1998

5340-15-120-4554
Assiemepianalespeci

151204554
A145278-1: RNCC: 3 | RNVC: 2

29 May 1995

5340-15-220-0667
Telaio Porta U 200

152200667
S1-144A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-151-4643
Maniglia

151514643
NAMS0171000: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-207-4866
Paracolpo Gomma

152074866
163111217: RNCC: 3 | RNVC: 2
(241)A0199163111217: RNCC: 5 | RNVC: 2

18 Oct 2012

5340-15-206-9953
Tappo Inferiore Ric

152069953
111443: RNCC: 3 | RNVC: 2
(241)A3593111443: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-15-105-2072
Rubber Bumper

151052072
837006: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-104-8874
Fissaggio Gaffetta

151048874
4663149: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-110-3752
Siebblech (He

151103752
NR10: RNCC: 3 | RNVC: 2
NR10: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-117-3989
Resilient Mount

151173989
D1405573: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-112-1360
Protezionepers

151121360
DE013.16.025: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-15-108-8862
Resiliente

151088862
VZA-U-300: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-105-2536
Piastra Rattoppo Ri

151052536
999690133H: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-213-8623
Ruota Con Supporto

152138623
393/A: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-0304
Gruppo Leva Di Sele

151180304
D0388001: RNCC: 3 | RNVC: 2

14 Nov 1994

5340-15-000-5794
Lifting Mast Hexago

150005794
C0090297: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-15-137-2596
Semicerniera

151372596
775213-103: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-154-5080
Control Rod

151545080
1Q 548281: RNCC: 3 | RNVC: 2
1Q 548281: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-110-2892
Bracket Ele

151102892
P120323-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-186-7439
Disco Separ.

151867439
40080035: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-171-9442
Incudine D'acciaio

151719442
INCUDINE D'ACCIAIO DA KG. 40: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-179-7279
Access Door

151797279
3799199: RNCC: 3 | RNVC: 2
(241)A42493799199: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-152-8762
Sostegno Elastico

151528762
VIN5025-02: RNCC: 3 | RNVC: 2
207097F91: RNCC: 5 | RNVC: 2

7 Nov 2000

5340-15-135-5237
Hinge (Cerniera)

151355237
66-1751-15: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-119-5439
Supporto Spessore D

151195439
1R 575435: RNCC: 3 | RNVC: 2
1R 575435: RNCC: 5 | RNVC: 9

6 Apr 1996

5340-15-221-9784
Molla Passacavi Da

152219784
4219-5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-232-2861
Plate

152322861
9009.3160-1: RNCC: 3 | RNVC: 2
534015E116377: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-061-6658
Supporto Speciale

150616658
0-34432: RNCC: 3 | RNVC: 2

3 Feb 1983

5340-15-157-9146
Supporto Speciale

151579146
0-159224: RNCC: 3 | RNVC: 2
(241)A39630-159224: RNCC: 5 | RNVC: 2
1PA39630-159224: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-127-4450
Anello

151274450
1740-16-058: RNCC: 3 | RNVC: 2
1740-16-058: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-213-7430
Serratura Elettrica

152137430
8681-60: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-105-6355
Collare Serraggio

151056355
4091420: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-117-2622
Threaded End Tensioning Tie Rod

151172622
132517101: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-120-6390
Dust And Moisture Seal Protective Cap-Plug

151206390
D0467074: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-002-5414
Double Angle Bracket

150025414
5801401243: RNCC: 3 | RNVC: 2

3 Sep 2013

5340-15-217-0991
Tacchi X Autoveicol

152170991
TACCHIXAUTOVEICOLI: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-6894
Coperchio A Vite Pe

151206894
D0471272: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-121-3200
Knob Seat

151213200
46715-001: RNCC: 5 | RNVC: 2
46715-001: RNCC: 5 | RNVC: 9
46715-001: RNCC: 5 | RNVC: 9

7 Nov 1995

5340-15-009-9787
Dust And Moisture Seal Protective Cap

150099787
1236-09-186: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-116-8519
Coperchio Inferiore

151168519
469497: RNCC: 3 | RNVC: 2
D0469497: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-162-0145
Cover

151620145
137607330: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-136-5710
Fascetta

151365710
J664G11: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-067-0059
Maniglia

150670059
S4P9A: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-106-0400
Colonnetta

151060400
503-03-0630: RNCC: 5 | RNVC: 2
503-03-0630: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-045-3361
Control Rod

150453361
591-12-21: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-3541
Alberospecilae

151093541
OP-08.31: RNCC: 3 | RNVC: 2

16 Oct 1989

5340-15-057-4227
Rubber Bumper

150574227
503-10-0267C: RNCC: 5 | RNVC: 2
503-10-0267C: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-006-7027
Cap Trreade

150067027
28544-001: RNCC: 5 | RNVC: 2
28544-001: RNCC: 5 | RNVC: 9
28544-001: RNCC: 5 | RNVC: 9

9 Jan 1980

5340-15-045-1493
Control Rod

150451493
501-12-19: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-122-6948
Maniglia Squadra Dx

151226948
SH3884-402: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-142-8881
Dust And Moisture Seal Boot

151428881
PR40: RNCC: 3 | RNVC: 2
GR40: RNCC: 5 | RNVC: 2

22 Oct 1996

5340-15-112-8248
Headless Grooved Rod

151128248
370473: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-156-3381
Handle

151563381
(241)A3460CBD71242P09: RNCC: 3 | RNVC: 2
CBD71242P09: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-215-9950
Avvolgitore Per Ser

152159950
AVVOLGITORE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-112-8407
Headless Grooved Rod

151128407
466416: RNCC: 3 | RNVC: 2
D0466416: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-000-5045
O. Protective Cover

150005045
CBD71459P01: RNCC: 3 | RNVC: 2

11 Mar 2013

5340-15-166-5196
Supporto A Scatto T

151665196
GW50628: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-173-3841
Leva Chiavistello P

151733841
58671: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-139-7264
Cinghia Fissaggio

151397264
A.2885800: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-187-6471
Trigger

151876471
109-0362-18-409: RNCC: 3 | RNVC: 2
(241)A0126109-0362-18-409: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-004-9881
Clamp

150049881
TR30E-62-806Z: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-200-5389
Supporto

152005389
1188.152-01: RNCC: 3 | RNVC: 2
(241)A30931188.152-01: RNCC: 5 | RNVC: 2

29 Jan 2006

5340-15-127-4401
Distanziale

151274401
1740-17-022: RNCC: 3 | RNVC: 2
1740-17-022: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-155-1025
Handwheel

151551025
5340151551025: RNCC: 2 | RNVC: 2
VH153/44P-M10X30: RNCC: 3 | RNVC: 2
142016262: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-113-4848
Cernierasportello

151134848
113A6012-012: RNCC: 3 | RNVC: 2

29 Jun 1991

5340-15-148-1896
Access Door

151481896
555908010003: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-109-3897
Electrical-Me Post

151093897
5137-265-17: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-150-3657
Piastra Di Attacco

151503657
01204125: RNCC: 3 | RNVC: 2

30 Sep 1999

5340-15-139-8516
Cerniera

151398516
3810730: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-117-7024
Resilient Mount

151177024
1S 575429LB: RNCC: 3 | RNVC: 2
1S 575429LB: RNCC: 5 | RNVC: 9

30 Nov 1994

5340-15-219-8592
Spina In Legno

152198592
10X1000: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-211-5234
Latch Adjustable Gr

152115234
76A-1115: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-113-2462
Supportospecialedes

151132462
311A6802-004: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-113-9688
Supportospeciale

151139688
255A3020-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-120-4747
Threaded End Tensioning Tie Rod

151204747
1233080456: RNCC: 3 | RNVC: 2
1233080456: RNCC: 5 | RNVC: 9

5 Nov 1996

5340-15-109-4297
Dust And Moisture Seal Protective Plug

151094297
60108761: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-234-4037
Collare Fissaggio F

152344037
5634.01FT-3/4": RNCC: 3 | RNVC: 2
534015E066778: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-147-1198
Flangia Di Fermo

151471198
206-9400-11-1: RNCC: 3 | RNVC: 2

9 Sep 1997

5340-15-062-0681
Hinge

150620681
P882742-002: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-122-6739
Moschettone

151226739
830552: RNCC: 3 | RNVC: 2
(241)A3593830552: RNCC: 5 | RNVC: 2

27 Sep 1996

5340-15-115-3456
Retainer

151153456
500-6400-045: RNCC: 3 | RNVC: 2
82-01646: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-005-4037
Threaded End Tensioning Tie Rod

150054037
1376-05-294: RNCC: 3 | RNVC: 2
137605294: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-170-4232
Right Bracket

151704232
60133153: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-059-0280
Key Blank

150590280
NP17TSN: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-115-1948
Spring Clip

151151948
9-1241-009: RNCC: 3 | RNVC: 2
82-00764: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-159-4727
Padlock

151594727
PN UAS 00003323: RNCC: 3 | RNVC: 2
8460F76023280: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-112-2263
Fascetta Di Serragg

151122263
41610015A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-105-8181
Sostegno Elastico

151058181
3744080: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-156-2119
Support Assy Plate

151562119
(241)A3460CBD71149G01: RNCC: 3 | RNVC: 2
CBD71149G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-005-9976
Bracket

150059976
20004-022-00: RNCC: 3 | RNVC: 2

11 Aug 1979

5340-15-119-7368
Suspension

151197368
01TL23367: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-193-1304
Shaft Plate

151931304
00687R0030: RNCC: 3 | RNVC: 2

19 Apr 2010

5340-15-149-2982
Convogliatore Aria

151492982
4882749: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-174-7482
Piatto 60X25 Pealsi

151747482
54130-01/235: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-050-2646
Helical Compression Spring Seat

150502646
7114-6: RNCC: 3 | RNVC: 2
7114-6: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-007-6973
Cover Plate Access

150076973
1141-39-911: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-156-2061
Lower Flange

151562061
CBD71197P03: RNCC: 3 | RNVC: 2
(241)A3460CBD71197P03: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-062-1703
Bushing Threaded

150621703
27155.0000: RNCC: 5 | RNVC: 2
4-27155.0000//C: RNCC: 5 | RNVC: 2
4-27155C: RNCC: 5 | RNVC: 2
27155.0000: RNCC: 5 | RNVC: 9
4-27155.0000//C: RNCC: 5 | RNVC: 9
4-27155C: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-15-120-6852
Supporto Leve Telec

151206852
D0484692: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-105-2086
Rubber Bumper

151052086
603374: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-163-1170
Clip

151631170
1314778080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-009-1464
Metal Runner

150091464
1380830: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-149-6185
Plate

151496185
518-38-2160: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-203-1885
Door Assy

152031885
P75TC933A11-401: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-185-0620
Pressure Spring

151850620
C22372-A6-C128: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-054-7942
Threaded End Tensioning Tie Rod

150547942
32-04-253: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-045-4286
Padlock

150454286
971-00-20-01ND: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-040-2553
Attacco Cerniera

150402553
2-5853-100-26735-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-191-1814
Tassello Nylon Mm.9

151911814
SB9/4: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-211-3476
Punta Pdi Ricambio

152113476
7/416: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-8538
Plug

150018538
ED00894R0330-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-008-5555
Rubber Bumper

150085555
754836 T: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-151-7860
Double Angle Bracket

151517860
0-179470: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-139-7798
Chiavistello

151397798
1000333: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-155-8263
Sensor Bracket

151558263
4112T83G01: RNCC: 3 | RNVC: 2
4112T83G01: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-111-6210
Handwheel

151116210
A6-80X9UNI6962-71UNI5007: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-062-4112
Anchor Strap

150624112
074029 X: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-205-2653
Angle Bracket

152052653
500411613: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-205-1397
Escutcheon Plate

152051397
1385905Z01: RNCC: 3 | RNVC: 2
(241)AB5551385905Z01: RNCC: 5 | RNVC: 2

21 Feb 2012

5340-15-213-8856
Piastra Guida Regol

152138856
465IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-153-6972
Tappo Di Protezione

151536972
111120230: RNCC: 1 | RNVC: 2

22 Feb 2001

5340-15-155-8304
Assieme Terminale

151558304
9AA5010A174-402: RNCC: 3 | RNVC: 2

16 Jul 2002

5340-15-125-6339
Morsetto Per Saldat

151256339
5258G-50: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-212-5419
Veranda Fiamma

152125419
F45I04640/01: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-162-0881
Clemens

151620881
AT-8324SX-20: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-15-180-2867
Turnbuckle

151802867
(241)A53606722-0052: RNCC: 3 | RNVC: 2
6722-0052: RNCC: 3 | RNVC: 2

14 Apr 2008

5340-15-198-7637
Morsetto Di Protezi

151987637
M2VA71B/9: RNCC: 3 | RNVC: 2

16 Nov 2004

5340-15-147-5793
T-Fitting

151475793
98RS951: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-113-2491
Staffacomplessivo

151132491
345A4280-401: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-116-4991
Resilient Mount

151164991
60166094: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-169-3594
Padlock

151693594
F72011000: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-005-6127
Asta Fine Corsa Spe

150056127
0-10374: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-156-8367
Rubber Bumper

151568367
16-G: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-15-105-6040
Staffa A Gomito

151056040
4567604: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-155-1008
Rubber Bumper

151551008
142010544: RNCC: 3 | RNVC: 2
58495-55 SHORE A: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-174-7804
Manual Control Handle

151747804
9433617: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-166-5137
Calamita Misura 3

151665137
442003: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-152-6696
Piastrina

151526696
0-111303: RNCC: 3 | RNVC: 2

10 Oct 2000

5340-15-023-7364

5340-15-175-9489
Serratura Cisa

151759489
46225-30: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-067-9154
Anode Retaining Plug

150679154
AF923-13-1540984: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-195-1476
Multiple Angle Bracket

151951476
9433621: RNCC: 3 | RNVC: 2

4 Mar 2011

5340-15-181-1856
Corrosion Preventive Anode

151811856
5852524301ZM: RNCC: 3 | RNVC: 2
(241)A31215852524301ZM: RNCC: 5 | RNVC: 2

12 Nov 2008

5340-15-149-6081
Flange

151496081
518-04-1150: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-180-7480

5340-15-068-2757
Supporto Ad Angolo

150682757
32-08-120: RNCC: 3 | RNVC: 2

28 May 1986

5340-15-170-3478
Rod End

151703478
206-001-202-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-045-1500
Control Rod

150451500
502-20-05: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-198-7733
Morsetto Di Protezi

151987733
M2AAM100LB/9: RNCC: 3 | RNVC: 2

16 Nov 2004

5340-15-089-9362
Dust And Moisture Seal Protective Cap

150899362
A64201: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-106-3740
Maniglia

151063740
2-180-25: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-202-4603
St Bracket Assembly

152024603
N925G9148101: RNCC: 3 | RNVC: 2
(241)A0126N925G9148101: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-15-009-5231
Metal Runner

150095231
760356: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-105-6325
Collare Serraggio

151056325
4421140: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-212-1699
Fissatubo 0 25

152121699
FGRI25: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-237-0569
Staffa

152370569
UB-20 B: RNCC: 3 | RNVC: 2
534015E131992: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-232-4673
Snodo

152324673
8016588: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-15-104-8895
Fissaggio Gaffetta

151048895
750/6: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-110-2802
Bracket Ang

151102802
P125389-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-199-2594
Dust And Moisture Seal Protective Cover

151992594
5100659-0619: RNCC: 3 | RNVC: 2
D-600-0083: RNCC: 5 | RNVC: 2
(241)A00695100659-0619: RNCC: 5 | RNVC: 2

23 Feb 2005

5340-15-103-5926
Friction Catch Stud Receptacle

151035926
CU310037B: RNCC: 3 | RNVC: 2
59.15.065.A: RNCC: 5 | RNVC: 2

10 Apr 1989

5340-15-106-0402
Colonnetta

151060402
503-03-0323: RNCC: 5 | RNVC: 2
503-03-0323: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-108-1084
Verschluss

151081084
A90498-02-30: RNCC: 3 | RNVC: 2
A90498-02-30: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-122-1421
Strip Retai

151221421
A-39543-001: RNCC: 3 | RNVC: 2
A39543-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-151-2857
Control Rod

151512857
541331360: RNCC: 3 | RNVC: 2
554133136000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-157-1764
Bracket

151571764
(241)A3460CBD71315P02: RNCC: 3 | RNVC: 2
CBD71315P02: RNCC: 3 | RNVC: 2

13 May 2003

5340-15-068-2536
Tirante In Gomma

150682536
RS 300 773: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-068-2304
Anchor Strap

150682304
W011832: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-156-7576
Ritegno Per Scarico

151567576
0-122094: RNCC: 3 | RNVC: 2
(241)A39630-122094: RNCC: 5 | RNVC: 2
1PA39630-122094: RNCC: 5 | RNVC: 2

6 Mar 2003

5340-15-137-2109
Fascetta

151372109
47-680-094-21: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-107-6398
Supporto Complessiv

151076398
301831G1: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-174-7430
Piatto 200X2 Dilver

151747430
51120-05/101: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-163-5167
Headless Grooved Rod

151635167
825/99928: RNCC: 3 | RNVC: 2
(241)A6479825/99928: RNCC: 5 | RNVC: 2

9 Oct 2002

5340-15-045-2713
Anello

150452713
N0R2-140-00-18I: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-5104
Helical Compression Spring Seat

151185104
B20/12: RNCC: 3 | RNVC: 2

1 Mar 1996

5340-15-045-1498
Control Rod

150451498
502-12-03: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-178-8464
Strap

151788464
206-2120-01-103: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-15-139-2708
Serratura In Ottone

151392708
49520: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-020-4136
Fibbia Gancio Femmi

150204136
C92X01-7: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-179-4375
Helical Compression Spring Seat

151794375
46185034: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-119-1899
Nut And Bolt Locking Plate

151191899
75216512: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-151-6949
Mensola

151516949
0-177583: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-158-4410
Hinge

151584410
67914-501: RNCC: 3 | RNVC: 2

15 Feb 2004

5340-15-120-5875
Hook Special

151205875
4-26027.0002//C: RNCC: 3 | RNVC: 2
4-26027.0001//D: RNCC: 5 | RNVC: 9
4-26027.0001//D: RNCC: 5 | RNVC: 9

28 Jun 1995

5340-15-109-1747
Assieme Cerniera

151091747
808-44111-15A: RNCC: 3 | RNVC: 2

6 Feb 1990

5340-15-151-2833
Access Door

151512833
541-16-0210: RNCC: 2 | RNVC: 3
541160210: RNCC: 3 | RNVC: 2
554116021000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-059-5379
Doorknob

150595379
1971TAV49-10: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-137-2110
Fascetta

151372110
47-680-094-23: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-002-5975
Angle Bracket

150025975
504382033: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-121-7354
Clamp

151217354
1576-18-302: RNCC: 3 | RNVC: 2

6 Jul 2000

5340-15-122-2173
Attache Cablage

151222173
800060283: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-193-1893
Turnbuckle

151931893
90 46 13 57: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-174-7479
Piatto 40X8 Pealsi1

151747479
54130-01/178: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-109-7379
Control Rod

151097379
4770454: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-149-5961
Ground Clamp

151495961
1141-37-060: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-109-3869
Electrical-Me Post

151093869
5137-291-07: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-149-1534
Assieme Chiavistell

151491534
2302-0035-001: RNCC: 3 | RNVC: 2

7 Dec 1998

5340-15-179-4815
Abs Connector Mount

151794815
873-4012-243: RNCC: 3 | RNVC: 2
M0016978: RNCC: 5 | RNVC: 2

22 Jan 2007

5340-15-162-1445
Nonmetallic Bumper

151621445
341-0053/02: RNCC: 3 | RNVC: 2

2 Mar 2001

5340-15-065-7250
Piastrina Supporto

150657250
109-0510-15-3: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-068-5776
Rod End Connector

5340-15-147-5150
Squadretta Speciale

151475150
44116-001: RNCC: 5 | RNVC: 2
44116-001: RNCC: 5 | RNVC: 9
44116-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-068-9840
Snap Hook

150689840
A6152-91016-4: RNCC: 3 | RNVC: 2

24 Nov 1986

5340-15-136-6744
Cerniera

151366744
S6157-61509-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-156-2029
Assy Base

151562029
CBD71169G01: RNCC: 3 | RNVC: 2
(241)A3460CBD71169G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-115-5422
Supporto Per Scatol

151155422
D0486882: RNCC: 3 | RNVC: 2

24 Mar 1994

5340-15-170-4718
Set Accessori

151704718
G0A121121: RNCC: 3 | RNVC: 2
(241)A0061G0A121121: RNCC: 5 | RNVC: 2

28 Feb 2003

5340-15-147-3132
Wheel Casto

151473132
LV124-30C: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-052-0446
Morsetto Serratubi

150520446
M740-20-21A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-157-4743
Cinghia

151574743
(241)S346520001-122: RNCC: 3 | RNVC: 2
2 0001-122: RNCC: 3 | RNVC: 2

7 Aug 2003

5340-15-146-6954
Resilient Mount

151466954
907/12AT-VB-TSZ-1-65-70SH: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-15-174-7441
Esag.Inox6 Aisi 303

151747441
51260-12/007: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-120-1221
Guide

151201221
518-04-0220: RNCC: 3 | RNVC: 2

11 Jan 1995

5340-15-210-7013
Linguetta Arrotonda

152107013
UNI6604-8X7X30: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-202-4545
Structual Angle

152024545
02491: RNCC: 3 | RNVC: 2
(241)A553602491: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-113-2370
Piastrina

151132370
224A6063-003: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-005-0953
Electrical-Me Post

150050953
1127-36-279: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-061-2469
Electrical-Me Post

150612469
000200078300: RNCC: 5 | RNVC: 2
1200096-114110003: RNCC: 5 | RNVC: 2
000200078300: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-061-5162
Nut And Bolt Retainer

150615162
P26HC41: RNCC: 5 | RNVC: 2
P26HC41: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-122-0232
Dust And Moisture Seal Protective Cap-Plug

151220232
4301833: RNCC: 3 | RNVC: 2

10 Apr 1996

5340-15-108-6206
Control Rod

151086206
93807122: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-151-2818
Control Rod

151512818
541-08-1070: RNCC: 2 | RNVC: 3
541081070: RNCC: 3 | RNVC: 2
554108107000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-203-1870
Inspection Cover

152031870
P75TC430A41-001: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-231-1107
Lucchetto Corazzato

152311107
28550-75: RNCC: 3 | RNVC: 2
534015E059301: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-068-9681
Helical Compression Spring Retainer

150689681
32-02-260: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-15-231-2185
Staffa

152312185
7737711: RNCC: 3 | RNVC: 2
534015E121137: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-191-5714
Heli-Coil

151915714
22375-2: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-127-2851
Staffetta

151272851
704758: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-196-9913
Padlock

151969913
PN UAS 00035082: RNCC: 3 | RNVC: 2
5340F76031147: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-151-7081
Staffa

151517081
0-171365: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-053-5989
Anello

150535989
45-3239-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-155-4423
Overturning Clamp

151554423
CBD71047P06: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-156-3635
Lower Front Support

151563635
(241)A3460CBD71408P04: RNCC: 3 | RNVC: 2
CBD71408P04: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-074-4381
Turnbuckle

150744381
2C45UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4205
Turnbuckle

150744205
2B22UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-148-3838
Dashpot

151483838
268395: RNCC: 3 | RNVC: 2

10 Aug 1998

5340-15-061-9360
Blocchetto

150619360
A1-23066-001: RNCC: 3 | RNVC: 2

16 Nov 1984

5340-15-127-4255
Molla Maniglia Chiu

151274255
845691: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-184-5027
Tappo

151845027
686-3702: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-142-9033
Bush

151429033
474966: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-236-3745
Scalpello Acciaio

152363745
0000002020: RNCC: 3 | RNVC: 2
534015E031979: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-007-9988
Helical Compression Spring Seat

150079988
4673610: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-198-4267
Manual Control Lever

151984267
122510915: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-178-9943
Hinge Block Assembl

151789943
RS 404 815 -X: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-163-2852
Platte

151632852
6275.166: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-219-8014
Calza 20X85

152198014
20X85: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-6342
Collare Serraggio

151056342
839382: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-0378
Resilient Mount

151200378
VZA-D-AV40: RNCC: 3 | RNVC: 2

5 Oct 1995

5340-15-122-9225
Inserto

151229225
80-004-3-6: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-009-5827
Helical Compression Spring Seat

150095827
72392910: RNCC: 3 | RNVC: 2
9982357: RNCC: 5 | RNVC: 2
72392910: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-006-4273
Nut And Bolt Locking Plate

150064273
1391418: RNCC: 3 | RNVC: 2
1391418: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-180-2272
Dust And Moisture Seal Protective Plug

151802272
76066675: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-001-7916
Angle Bracket

150017916
5949786186: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-147-0753
Manual Control Handle

151470753
51339: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-205-8563
Grooved Clamp Coupling Sleeve

152058563
5801354497: RNCC: 3 | RNVC: 2

6 Apr 2012

5340-15-120-8350
Low Bracket

151208350
301237: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-154-5741
Copiaccesso

151545741
112720195: RNCC: 2 | RNVC: 3

26 Jul 2001

5340-15-122-5579
Plate Actua

151225579
01TL21038-01: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-007-6980
Double Angle Bracket

150076980
1141-39-147: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-178-4941
Dust And Moisture Seal Protective Cap

151784941
308090-004: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-117-9906
Resilient Mount

151179906
AVAUD 906M-E: RNCC: 3 | RNVC: 2

2 Nov 1994

5340-15-213-3751
Chiudiporta A Pavim

152133751
91102: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-009-6407
Listello Profilato

150096407
1108123: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-174-9847
Handle

151749847
930-4487/01.01: RNCC: 3 | RNVC: 2

12 Nov 2003

5340-15-214-3797
Inserto

152143797
C2R1947-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-101-8928
Threaded End Tensioning Tie Rod

151018928
1P516329: RNCC: 3 | RNVC: 2
1P516329: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-066-0628
Electrical-Me Post

150660628
W012045: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-202-4543
Giunto Coperchio

152024543
02273: RNCC: 3 | RNVC: 2
(241)A553602273: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-148-2806
Assieme Tappo

151482806
PNE301009-002: RNCC: 3 | RNVC: 2

20 Jul 1998

5340-15-212-0344
Ritieni A Catena Ot

152120344
RITIENIACATENA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-179-1588
Container

151791588
RS 011 513 A: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-149-4553
Fermacavo A Ponte

151494553
1086.006: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-15-153-5991
Base (1) Per Sosteg

151535991
142018244: RNCC: 3 | RNVC: 2

16 Feb 2001

5340-15-236-2717
Lucchetto A Combina

152362717
155/40: RNCC: 3 | RNVC: 2
534015E130296: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-206-9177
Assem Angle Bracket

152069177
155443-1: RNCC: 3 | RNVC: 2
(241)A0076155443-1: RNCC: 5 | RNVC: 2

26 Jul 2012

5340-15-213-8291
Giunzione A 'S' Per

152138291
503-S: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-179-5586
Disk Attachment

151795586
294796: RNCC: 5 | RNVC: 9

2 Mar 2007

5340-15-116-2342
Angolare Speciale

151162342
190524109: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-15-066-4080
Tappo Per Musetto C

150664080
68-903050-404: RNCC: 3 | RNVC: 2

25 Oct 1985

5340-15-204-8213
Integrazione Meccan

152048213
KIT/EOM.1147/A: RNCC: 3 | RNVC: 2
(241)A3028KIT/EOM.1147/A: RNCC: 5 | RNVC: 2

12 Jan 2012

5340-15-232-2577
Armadio R Supporti

152322577
292407-B21: RNCC: 3 | RNVC: 2
534015E150663: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-115-7054
Coperchio

151157054
D0469671: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-126-4493
Molla

151264493
14560-19: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-149-6169
Lever

151496169
518-38-1910: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-109-3806
Electrical-Me Post

151093806
5137-290-43: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-062-0695
Hinge

150620695
P882734-001: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-109-6003
Double Angle Bracket

151096003
60125373: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-127-4454
Anello

151274454
1740-16-052: RNCC: 3 | RNVC: 2
1740-16-052: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-051-4261
Molla

150514261
9911916: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-006-2713
Rullino Speciale

150062713
0-28220: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-154-1752
Pignone Elicoidale

151541752
130172-3: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-062-8775
Anello Speciale

150628775
0-42624: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-236-5124
Cerniera A Saldare

152365124
080111: RNCC: 3 | RNVC: 2
534015E015385: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-153-7664
Base (1) Per Sosteg

151537664
01800A137440: RNCC: 5 | RNVC: 2
01800A137440: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-009-8388
Staffa A Gomito

150098388
04-089-443: RNCC: 3 | RNVC: 2

7 Feb 1994

5340-15-061-8171
Fascetta Speciale

150618171
0-102351: RNCC: 3 | RNVC: 2

30 Nov 1982

5340-15-142-9325
Piastrina Di Fermo

151429325
2-7-0457: RNCC: 3 | RNVC: 2

30 Oct 1996

5340-15-115-3454
Oil Filter Cover

151153454
710-2751-038: RNCC: 3 | RNVC: 2
82-01636: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-187-4447
Extheadset-Mic Assy

151874447
109-0816-20-107: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-15-060-1720
Helical Compression Spring Retainer

150601720
20621-001A1: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-15-049-5462
Cerniera

150495462
2-2259-101-24538-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-068-4092
Supporto Compl.

150684092
212-1115-18-3: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-052-9096
Mezza Cerniera

150529096
204-4610-25-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-157-6165
Control Rod

151576165
11031309: RNCC: 3 | RNVC: 2
(241)A977211031309: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-051-4174
Tassello

150514174
743598: RNCC: 3 | RNVC: 2
743598: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-157-6100
Doorstop

151576100
11030159: RNCC: 3 | RNVC: 2
(241)A977211030159: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-101-7437
Piastra Forata

151017437
P8: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-101-8475
Gomma Pistrina

151018475
028200074200: RNCC: 5 | RNVC: 2
028200074200: RNCC: 5 | RNVC: 9

20 Jan 1988

5340-15-003-4651
Stand Base

150034651
182707200: RNCC: 3 | RNVC: 2
(241)A0199182707200: RNCC: 5 | RNVC: 2

14 Nov 2013

5340-15-193-1886
Manual Control Handle

151931886
42560732: RNCC: 3 | RNVC: 2

20 Apr 2010

5340-15-002-5972
Double Angle Bracket

150025972
5801326213: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-110-5624
Helical Compression Spring Seat

151105624
1P 509125: RNCC: 3 | RNVC: 2
509125: RNCC: 3 | RNVC: 2
1P 509125: RNCC: 5 | RNVC: 9
509125: RNCC: 5 | RNVC: 9

11 Dec 1996

5340-15-067-2632
Fascetta

150672632
760SS2-8: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-231-1122
Contropiastra Per S

152311122
06077-16: RNCC: 3 | RNVC: 2
534015E088269: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-006-7833
Gagger

150067833
121862: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-053-5988
Anello

150535988
45-3241-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-101-2961
Slide Telescopio

151012961
285014P2: RNCC: 3 | RNVC: 2
71-02-006-006: RNCC: 5 | RNVC: 2

30 Jan 1988

5340-15-120-7542
Sleeve Bushing Half

151207542
GB254-420-052: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-107-4336
Flexible Surface Mechanical Patch

151074336
22030342: RNCC: 3 | RNVC: 2
5000057-122: RNCC: 5 | RNVC: 2
22030342A: RNCC: 5 | RNVC: 2
22030342: RNCC: 5 | RNVC: 9

19 Jun 1988

5340-15-139-9531
Tappo

151399531
25224524-184: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-116-3461
Dust And Moisture Seal Protective Cap-Plug

151163461
82287241: RNCC: 3 | RNVC: 2

28 Apr 1993

5340-15-074-4266
Turnbuckle

150744266
1A27UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-220-8184
Gear Up Er Idler

152208184
117865: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-142-2259
Turnbuckle

151422259
0102300001: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-120-6833
Portaboccola Specia

151206833
D0486696: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-147-7692
Double Angle Bracket

151477692
611-0085: RNCC: 3 | RNVC: 2

6 Apr 1998

5340-15-147-0348
Corrosion Preventive Anode

151470348
168-1275-22-PLUG: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-15-197-0208
Snap Hook

151970208
PN UAS 00041578: RNCC: 3 | RNVC: 2
4030F76034844: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-115-7122
Flangia Tubo Misura

151157122
D1401011: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-115-5418
Piastra Di Collegam

151155418
D0484665: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-152-0456
Staffa

151520456
0-106654: RNCC: 3 | RNVC: 2
1PA39630-106654: RNCC: 5 | RNVC: 2

2 Aug 2000

5340-15-102-2814
Inserto Con Cuscine

151022814
67-207011-401: RNCC: 3 | RNVC: 2

8 Feb 1988

5340-15-148-7490
Assieme Tappo Destr

151487490
2104-0016-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-005-5433
Cma Drawer

150055433
8102700-04: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-170-7309
Ground Bars Support

151707309
W036574: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-105-8490
Maniglia Ribaltabil

151058490
8952: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-156-2024
Assy Base

151562024
(241)A3460CBD71158G01: RNCC: 3 | RNVC: 2
CBD71158G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-193-6640
Dust And Moisture Seal Protective Plug

151936640
163126216: RNCC: 3 | RNVC: 2
(241)A0199163126216: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-103-0744
Dust And Moisture Seal Protective Cap-Plug

151030744
L2125086: RNCC: 3 | RNVC: 2
DE160.03.078: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-181-4222
Inserto

151814222
354536-1: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-148-3464
Double Angle Bracket

151483464
102533: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-197-7103
Protezione

151977103
530030: RNCC: 3 | RNVC: 2

20 Apr 2004

5340-15-186-7742
Cab Roof Pan Facing

151867742
0000504232370: RNCC: 3 | RNVC: 2
504232370: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-114-3280
Leva Di Bloccaggio

151143280
CF328424: RNCC: 3 | RNVC: 2
CF328414AU: RNCC: 5 | RNVC: 2

4 Jun 1992

5340-15-213-1869
Nastro Per Levigatr

152131869
NASTRO75X480GRANA100: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-100-5498
Assiem Chiavistello

151005498
G610-12-26: RNCC: 3 | RNVC: 2

10 Apr 1987

5340-15-110-7979
Protezionetraversas

151107979
02893-001A01: RNCC: 3 | RNVC: 2
02893-001A1: RNCC: 5 | RNVC: 2

29 Jul 1990

5340-15-005-3872
Dust And Moisture Seal Protective Plug

150053872
A83245-38: RNCC: 3 | RNVC: 2

12 Feb 1979

5340-15-147-5208
Alloggiamento

151475208
31805-002: RNCC: 5 | RNVC: 2
31805-002: RNCC: 5 | RNVC: 9
31805-002: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-188-5539
Manual Contr Lever

151885539
300A052001-106: RNCC: 3 | RNVC: 2
(241)A3397300A052001-106: RNCC: 5 | RNVC: 2

7 Oct 2009

5340-15-202-0173
Supporto A Y

152020173
YAR 203 2 F SKF: RNCC: 3 | RNVC: 2
YAR 203 2F: RNCC: 5 | RNVC: 2
(241)A5465YAR2032FSKF: RNCC: 5 | RNVC: 2

24 Jan 2007

5340-15-157-9620
Sealing Plug Assembly

151579620
5519021: RNCC: 3 | RNVC: 2
(241)A0094917100065: RNCC: 5 | RNVC: 2
917100065: RNCC: 5 | RNVC: 2

3 Dec 2003

5340-15-152-5500
Supporto Elettroven

151525500
04041A: RNCC: 3 | RNVC: 2

27 Sep 2000

5340-15-112-3428
Resilient Mount

151123428
4837090: RNCC: 3 | RNVC: 2
(7001)5340151123428: RNCC: 5 | RNVC: 2

7 Oct 1989

5340-15-139-3497
Collare Fissaggio

151393497
2519816: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-148-8758
Piastra Di Torsione

151488758
2401-0030-003: RNCC: 3 | RNVC: 2

20 Oct 1998

5340-15-136-5418
Semicerniera

151365418
212-060-804-81: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-15-137-6088
Tassello In Nylon M

151376088
S8V0204: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-116-8493
Cilindro Supporto

151168493
D1402600: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-205-3817
Manual Control Handle

152053817
500-001-00357: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-15-200-9899
Barrotti E Tiranti

152009899
UM107069R1: RNCC: 3 | RNVC: 2
(241)A5205UM107069R1: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-15-215-6121
Lame Aeg X Seghetto

152156121
AEGXSEGHETTO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-195-1447
Utility Resilient Mount

151951447
2520VV20-35: RNCC: 3 | RNVC: 2
10001442-15: RNCC: 5 | RNVC: 2
442-549: RNCC: 5 | RNVC: 2

4 Mar 2011

5340-15-215-4259
Tirante A Quattro B

152154259
ART100DIAM12: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-017-5191

5340-15-163-3009
Hebel

151633009
5200.674: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-117-9195
Terminale Ad Occhio

151179195
291A3016-401: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-117-7265
Control Rod

151177265
142502206: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-187-6688
Picket

151876688
6142056711: RNCC: 3 | RNVC: 2
(241)S56526142056711: RNCC: 5 | RNVC: 2

21 Apr 2009

5340-15-003-3731
Dust And Moisture Seal Protective Cap

150033731
06409.00.993: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-006-7555
Handle Pull

150067555
4-26827-003C: RNCC: 5 | RNVC: 2
4-26827-003C: RNCC: 5 | RNVC: 9

26 Oct 1979

5340-15-186-3652
Gabasso In Plastica

151863652
AE466004: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-178-9951
Rubber Buffer

151789951
RS 404 884 -R: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-234-0418
Anello A Campana

152340418
28X24 F4 SALD: RNCC: 3 | RNVC: 2
534015E031135: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-203-1278
Anode Retaining Plug

152031278
3VA0.96.166: RNCC: 3 | RNVC: 2
1N533099376: RNCC: 5 | RNVC: 2

25 Nov 2007

5340-15-189-4749
Spacing Threaded Standoff

151894749
0000008188251: RNCC: 3 | RNVC: 2

25 Feb 2010

5340-15-112-8339
Bussolaportab

151128339
466758: RNCC: 3 | RNVC: 2
D0466758: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-117-7154
Anode Retaining Plug

151177154
TP3/4ZN: RNCC: 3 | RNVC: 2
1P 549947: RNCC: 3 | RNVC: 2
1P 549947: RNCC: 5 | RNVC: 9

23 Jan 1995

5340-15-199-4904
Engine Accessory Bracket

151994904
313072F01: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-182-4146
Ruote In Gomma E Fl

151824146
03978: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-177-5534
Assieme Fascetta

151775534
204-8204-19-3: RNCC: 3 | RNVC: 2
(241)A0126204-8204-19-3: RNCC: 5 | RNVC: 2

28 Apr 2004

5340-15-152-7427
Tirante Speciale

151527427
21442112F: RNCC: 3 | RNVC: 2
3144G2112F: RNCC: 5 | RNVC: 2

20 Oct 2000

5340-15-065-5992
Serratura Completa

150655992
212-1300-12-1: RNCC: 3 | RNVC: 2

29 Mar 1994

5340-15-197-7270
Assieme Scodellino

151977270
129-0850-07-123: RNCC: 3 | RNVC: 2

21 Apr 2004

5340-15-112-2080
Resilient Mount

151122080
390534-0008: RNCC: 3 | RNVC: 2

8 Mar 1991

5340-15-102-1046
Gradino Di Salita

151021046
193-0472/16: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-008-0214
Blocchetto Fermo

150080214
109-0320-09-1: RNCC: 3 | RNVC: 2
109-0320-09-3: RNCC: 5 | RNVC: 2

2 Sep 1981

5340-15-127-2231
Anello Arresto Ghie

151272231
1740-45-073: RNCC: 3 | RNVC: 2
1740-45-073: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-100-9362
Semicerniera Comp

151009362
212-4600-11-5: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-153-8084
Access Door

151538084
109-0711-76-123: RNCC: 3 | RNVC: 2

1 Mar 2001

5340-15-206-2808
Utility Resilient Mount

152062808
VZA-R-AVU-130: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-170-8052
Supp.Per Allum.E Tr

151708052
340-0454/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-199-0465
Speciale Staffa

151990465
157725100: RNCC: 3 | RNVC: 2
(241)A0199157725100: RNCC: 5 | RNVC: 2

9 Jan 2005

5340-15-111-5777
Clamp Block

151115777
01TL22289: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-148-3837
Dashpot

151483837
268406: RNCC: 3 | RNVC: 2
1PA2918268406: RNCC: 5 | RNVC: 2

10 Aug 1998

5340-15-121-9046
Dispositivo Di Bloc

151219046
142507027: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-158-0010
Speciale Morsetto

151580010
06100A139510: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-15-061-5248
Rim Clen Clamp (1)

150615248
L304BG: RNCC: 5 | RNVC: 2
L304BG: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-089-0641
Distanziale

150890641
6153342-2: RNCC: 3 | RNVC: 2
6153342-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-074-4423
Turnbuckle

150744423
1B30UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-127-6411
Tirante Per Fissagg

151276411
739699: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-195-9165
Paracolpo Gomma

151959165
J04841655-001: RNCC: 3 | RNVC: 2
(241)A0019J04841655-001: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-180-4265
Support Assembly

151804265
205-1600-10-257: RNCC: 3 | RNVC: 2
(241)A0126205-1600-10-257: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-170-8269
Pressure Block

151708269
340-0113/05: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-152-7255
Manicotto Speciale

151527255
109-0111-36-101: RNCC: 3 | RNVC: 2

19 Oct 2000

5340-15-007-3477
Flangia Speciale

150073477
0-05643: RNCC: 3 | RNVC: 2
0-31502: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-151-7556
Fittin Rod Assembly

151517556
J52850400-402: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-212-4411
Molla Chiudiporta

152124411
402: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-222-2270
Pannello 1770X1020

152222270
S1-118: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-151-1324
Rotolo Bandella

151511324
5055/1: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-15-154-9324
Dust And Moisture Seal Protective Cap-Plug

151549324
CBD71057G01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-198-4268
Manual Control Lever

151984268
122611042: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-007-9946
Nut And Bolt Retainer

150079946
4613376: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-067-9741
Avviamento

150679741
1.300.0144A: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-006-2565
Guida Speciale

150062565
0-28879: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-112-9435
Fascettafissaggiodi

151129435
21610077A: RNCC: 3 | RNVC: 2

11 Apr 1994

5340-15-107-2654
Semicerniera

151072654
2-54296-102-72697: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-151-1165
Staffa Per Tubazion

151511165
J26240211-002: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-110-1587
Tacchettofilettato

151101587
1455-10-138: RNCC: 3 | RNVC: 2

30 Jan 1990

5340-15-207-6700
Nonmetallic Solid Wheel

152076700
185300011: RNCC: 3 | RNVC: 2
(241)A0199185300011: RNCC: 5 | RNVC: 2

9 Nov 2012

5340-15-149-5112
Manicotto Speciale

151495112
28032-4: RNCC: 3 | RNVC: 2
28032-4: RNCC: 5 | RNVC: 9

30 Mar 1999

5340-15-214-2501
Lucchetto Di Sicure

152142501
LUCCHETTO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-198-5124
Kit Maniglia Inferi

151985124
CATN3105A: RNCC: 3 | RNVC: 2
(241)SH469CATN3105A: RNCC: 5 | RNVC: 2

7 Oct 2004

5340-15-187-6318
Bumper

151876318
504088756: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-142-9107
Stop Ring

151429107
476728: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-135-4690
Serratura

151354690
69-103136-813: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-117-5549
Double Angle Bracket

151175549
109-0321-28-1: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-056-7067
Nut And Bolt Locking Plate

150567067
1127-21-148: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-216-0012
Moschettone Per Par

152160012
A23291-0-00: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-113-2883
Turnbuckle Body

151132883
1Z 591170: RNCC: 3 | RNVC: 2
1Z 591170: RNCC: 5 | RNVC: 9

3 Dec 1993

5340-15-194-2422
Maniglia Per Tendit

151942422
202800007.01500: RNCC: 3 | RNVC: 2
(241)A6114202800007.01500: RNCC: 5 | RNVC: 2

18 Oct 2010

5340-15-166-5097
Assieme Coperchio

151665097
3060141400: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-059-7108
Electrical-Me Post

150597108
312-0191-01: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-230-4638
Manicotto Abrasivo

152304638
PCH05L: RNCC: 3 | RNVC: 2
534015E064962: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-220-6846
Cassetta Pvc Per Av

152206846
CASSETTAPVCML6: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-005-1075
Cover Plate Access

150051075
1137-10-141: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-151-1164
Staffa Per Tubazion

151511164
J26240211-001: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-063-6362
Cover Plate Access

150636362
820.02: RNCC: 3 | RNVC: 2
9926174: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-074-4226
Turnbuckle

150744226
2C12UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-163-3080
Dust And Moisture Seal Protective Cap

151633080
EC-8: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-179-5458
Zoccolo Speciale

151795458
NS4E012-1: RNCC: 3 | RNVC: 2
(241)A2142NS4E012-1: RNCC: 5 | RNVC: 2

2 Mar 2007

5340-15-231-6664
Tampone

152316664
0-122658: RNCC: 3 | RNVC: 2
534015E156905: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-118-4447
Resilient Mount

151184447
60153429: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-231-0584
Gancio In Velcro Ad

152310584
00224PMPN: RNCC: 3 | RNVC: 2
534015E112341: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-122-9781
Vite Per Testa

151229781
4854648: RNCC: 3 | RNVC: 2

8 Oct 1996

Load More Results