What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 66 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 66 of 72

5340-15-139-5032
Tampone Gomma

151395032
7562093: RNCC: 3 | RNVC: 2

29 Dec 1997

5340-15-127-1035
Tirante Per Comando

151271035
398495: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-231-3370
Supporto Tendicingh

152313370
4831072: RNCC: 3 | RNVC: 2
534015E155976: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-166-5050
Rod End Ass

151665050
433A1304405: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-150-5875
Assieme Compasso

151505875
A37600-01-08: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-175-8474
Alesatore

151758474
260/55: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-206-5262
Dust And Moisture Seal Protective Plug

152065262
7371311: RNCC: 3 | RNVC: 2
7371311: RNCC: 5 | RNVC: 2

22 Jun 2012

5340-15-136-2680
Staffa

151362680
7302218: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-219-8573
Confezione Graffett

152198573
31011425: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-174-7466
Esagono Ott.8P-Ot58

151747466
53240-12/009: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-105-5992
Staffa A Gomito

151055992
4740866: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-6036
Staffa A Gomito

151056036
4988012: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-020-2063
Distanziatore

150202063
01-231Q10: RNCC: 3 | RNVC: 2
55.35.001.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-045-2057
Hinge

150452057
3251-07: RNCC: 3 | RNVC: 2
9AA3020A042-001: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-214-5397
Tela Smeriglio In B

152145397
TELASMERIGLIO-GR180X110MMX28MT: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-148-4854
Manual Control Lever

151484854
98446354: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-195-1989
Dust And Moisture Seal Boot

151951989
79104741: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-179-6725
Sheath

151796725
00095440: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-179-1186
Fork

151791186
021325: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-074-4428
Turnbuckle

150744428
2B8UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-170-3284
Mount

151703284
142-0267/01A: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-202-2293
Lh Hinge Assy

152022293
117A1120-403: RNCC: 3 | RNVC: 2
(241)A0019117A1120-403: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-15-107-5427
Supporto Di Montagg

151075427
4-MON ALI: RNCC: 3 | RNVC: 2

6 Dec 1988

5340-15-181-2420
Door Holder

151812420
072310945-S.S.: RNCC: 3 | RNVC: 2

17 Nov 2008

5340-15-217-5595
Molle In Ferro

152175595
EXRI7903208: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-139-7863
Staffa Fissaggio

151397863
1000900: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-231-1127
Lucchetto Rettangol

152311127
26510-70: RNCC: 3 | RNVC: 2
534015E136948: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-151-2753
Contol Rod

151512753
541-01-0200: RNCC: 2 | RNVC: 3
541010200: RNCC: 3 | RNVC: 2
554101020000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-009-2145
Protezione In Gomma

150092145
204-4610-38-11: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-106-9624
Piastrina Fissaggio

151069624
5086-03-34: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-188-6166
Dust And Moisture Seal Protective Plug

151886166
109-3101-01-21: RNCC: 3 | RNVC: 2

15 Oct 2009

5340-15-215-2985
Mandrino

152152985
ABC FIG.E1120/3-13: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-062-1704
Terminal Stud

150621704
26057.0000: RNCC: 5 | RNVC: 2
4-26057.0000//C: RNCC: 5 | RNVC: 2
4-26057C: RNCC: 5 | RNVC: 2
26057.0000: RNCC: 5 | RNVC: 9
4-26057.0000//C: RNCC: 5 | RNVC: 9
4-26057C: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-15-148-7153
Rotella Orientabile

151487153
EPBS 100: RNCC: 3 | RNVC: 2
512.113: RNCC: 5 | RNVC: 2

28 Sep 1998

5340-15-120-5417
Control Rod

151205417
03449: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-222-2711
Ruota Piena Non Met

152222711
050032: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-151-4312
Piastra

151514312
0-173514: RNCC: 3 | RNVC: 2
(241)A39630-173514: RNCC: 5 | RNVC: 2

24 May 2000

5340-15-049-7523
Fascetta

150497523
AB47-706-217-17: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-063-0130
Latch

150630130
SF260-11-164-01: RNCC: 3 | RNVC: 2
SF260-11-164-01: RNCC: 5 | RNVC: 9

1 Sep 1982

5340-15-003-3439
Headless Straight Rod

150033439
182724014: RNCC: 3 | RNVC: 2
(241)A0199182724014: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-15-166-5073
Cap Ass

151665073
31827001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5153
Tassello Da Muro 10

151665153
275793: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-113-6056
Cover M Pin

151136056
AC120565-1/3-5: RNCC: 3 | RNVC: 2

20 Jan 1992

5340-15-062-8724
Anello Speciale

150628724
0-42566: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-197-7301
Dust And Moisture Seal Protective Plug

151977301
GPN800M16X1-5: RNCC: 3 | RNVC: 2
GPN800M16X1-5: RNCC: 5 | RNVC: 2

22 Apr 2004

5340-15-060-1577
Access Cover Plate

150601577
1376-19-214: RNCC: 3 | RNVC: 2
137619214: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-162-2785
Dust And Moisture Seal Protective Cap

151622785
60-17415-00: RNCC: 3 | RNVC: 2

4 Jun 2001

5340-15-020-2396
Turnbuckle

150202396
2B10UNI2020A35-663F0S: RNCC: 2 | RNVC: 2
550.15.17.A: RNCC: 5 | RNVC: 2
55.90.098.A: RNCC: 8 | RNVC: 2

1 Jan 1974

5340-15-115-7120
Flangia Tubo Misura

151157120
D0470355: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-147-8784
Control Rod

151478784
2540502: RNCC: 3 | RNVC: 2
CAE00058: RNCC: 5 | RNVC: 2

18 May 1998

5340-15-234-4035
Collare Fissaggio F

152344035
5634.01FT-1/2": RNCC: 3 | RNVC: 2
534015E066775: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-237-7079
Maniglia Chiusura P

152377079
00007912: RNCC: 3 | RNVC: 2
534015E078080: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-045-1494
Control Rod

150451494
501-12-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-5629
Screw Thread Insert

151205629
M45932/1-13L: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-141-5942
Anodo

151415942
CP50/A130: RNCC: 3 | RNVC: 2
4G-A/C/I/165/0: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-138-6579
Staffa

151386579
2937-1: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-106-5399
Staffetta Ribadita

151065399
12.508.047: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-4376
Turnbuckle

150744376
2C27UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-156-3359
Trasportatore

151563359
(241)A3460CBD71225P01: RNCC: 3 | RNVC: 2
CBD71225P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-212-0205
Lucchetto 'Ala' Da

152120205
LUCCHETTOALA50MM: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-3582
Grooved Clamp Coupling Half

151153582
538C21-9: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-052-0961
Control Rod

150520961
501-12-21: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-177-5863
Handwheel

151775863
VBR.2/200: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-005-5124
Headless Grooved Rod

150055124
C26518: RNCC: 3 | RNVC: 2
9934511: RNCC: 5 | RNVC: 2
9934511: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-192-2605
Gancio (Contratto

151922605
3.127.205: RNCC: 3 | RNVC: 2

2 Mar 2010

5340-15-177-6945
Handwheel

151776945
00088653: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-112-8228
Bussolaportab

151128228
466407: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-179-2034
Dust And Moisture Seal Protective Plug

151792034
V40521.00: RNCC: 3 | RNVC: 2
(241)A4447V40521.00: RNCC: 5 | RNVC: 2

31 Jul 2006

5340-15-156-3644
Plate

151563644
(241)A3460CBD71408P12: RNCC: 3 | RNVC: 2
CBD71408P12: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-178-3810
Turnbuckle

151783810
07.193.08: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-106-7558
Astuccio Isolante

151067558
864643: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-195-5566
Cinghia Con Tendito

151955566
201800007.01500: RNCC: 3 | RNVC: 2
(241)A6114201800007.01500: RNCC: 5 | RNVC: 2

6 Apr 2011

5340-15-220-0465
Piastra Per Dilataz

152200465
S1-74B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-217-7742
Unita'base Basis In

152177742
INC-FESTO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-149-7702
Serie Anelli Per Am

151497702
RG-MM50-4: RNCC: 3 | RNVC: 2
(241)A3290RG-MM50-4: RNCC: 5 | RNVC: 2

21 Jun 1999

5340-15-194-3605
Lathch Nose

151943605
109-0324-31-107: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-067-9503
Sportello Laterale

150679503
53.014: RNCC: 3 | RNVC: 2
53.014: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-156-2052
Flange

151562052
CBD71194P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71194P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-151-9447
Double Angle Bracket

151519447
0-174665: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-15-179-6073
Dust And Moisture Seal Protective Cap-Plug

151796073
0.009.0541.0: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-15-136-2376
Tappo

151362376
4699521: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-135-9979
Clip

151359979
XC2286: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-158-0506
Speciale Piastra

151580506
06200A159990: RNCC: 3 | RNVC: 2

15 Dec 2003

5340-15-056-3941
Resilient Mount

150563941
88110511: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-112-9722
Piastrinacompleta

151129722
129-0041-71-101: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-202-6200
Left Striker

152026200
306083: RNCC: 3 | RNVC: 2
(241)A0810306083: RNCC: 5 | RNVC: 2

27 May 2007

5340-15-137-3368
Blocchetto Compl.

151373368
S6166-62084-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-148-0618
Astina Speciale

151480618
263A1587-001: RNCC: 3 | RNVC: 2

16 Jun 1998

5340-15-001-8465
Unavailable

150018465
ED00234R0550-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-156-2127
Suppo Seals Mandrel

151562127
(241)A3460CBD71210G01: RNCC: 3 | RNVC: 2
CBD71210G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-156-2062
Upper Flange

151562062
CBD71197P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71197P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-121-4324
Turnbuckle Body

151214324
554103203000: RNCC: 3 | RNVC: 2
541-03-2030: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-15-170-8249
Piastrina Di Pressi

151708249
340-0099/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-060-4643
Electrical-Me Post

150604643
1376-64-464: RNCC: 3 | RNVC: 2
137664464: RNCC: 5 | RNVC: 2

30 Jan 1977

5340-15-186-3012
Contropiastra Regol

151863012
17802760: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-074-4249
Turnbuckle

150744249
2D10UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-179-0037
Plate

151790037
RS 413 792 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-117-4051
Coperchio Valvola D

151174051
D0466450: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-139-8079
Kit Cinghie Sella M

151398079
900016/C: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-117-0469
Soupape De Securite

151170469
513-1/2 IN: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-157-4991
Kit Piede Pistone C

151574991
20EK004: RNCC: 3 | RNVC: 2
(241)A166720EK004: RNCC: 5 | RNVC: 2

5 Sep 2003

5340-15-020-1952
Gancio

150201952
01-231N19: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-119-9122
Complessiv Mensola

151199122
180504902: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-005-6536
Anello Speciale

150056536
0-31494: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-231-1139
Lucchetto Ad Arco M

152311139
575.7: RNCC: 3 | RNVC: 2
534015E089895: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-101-0446
Dispositivo Di Bloc

151010446
2422 082 00065: RNCC: 3 | RNVC: 2

27 Oct 1986

5340-15-166-5159
Rotella In Gomma

151665159
2270223: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-4819
Mensola Fischer Ner

151664819
1602: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-205-4293
Ring Anti-Size

152054293
3531152: RNCC: 3 | RNVC: 2
903/21439: RNCC: 5 | RNVC: 2

8 Mar 2012

5340-15-174-7316
Elev.Axis Handwheel

151747316
825-4012-328: RNCC: 3 | RNVC: 2
M0016941: RNCC: 5 | RNVC: 2

2 Oct 2003

5340-15-191-7213
Ammortizzatore Ad A

151917213
C3H612: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-154-5066
Staffa (1) Accessor

151545066
1Q 548244: RNCC: 3 | RNVC: 2
1Q 548244: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-118-0829
Linear Actuating Cylinder Cap

151180829
D0484561: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-231-0679
Supporto Cavo Termo

152310679
402C4015: RNCC: 3 | RNVC: 2
534015E140351: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-178-1207
Dust And Moisture Seal Protective Cap

151781207
383 901 064: RNCC: 3 | RNVC: 2

14 Feb 2005

5340-15-163-4926
Plug

151634926
16992640: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-202-5278
Resilient Mount

152025278
786013M: RNCC: 3 | RNVC: 2
MM113802: RNCC: 5 | RNVC: 2
(241)A1579786013M: RNCC: 5 | RNVC: 2

29 Apr 2007

5340-15-112-2909
Tappo Speciale

151122909
252A3087-025: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-154-7469
Busta Con Fascette

151547469
ZMD98XX-PDR033: RNCC: 3 | RNVC: 2

17 Sep 2001

5340-15-156-4754
Supporto A Sella Tu

151564754
0-121342: RNCC: 3 | RNVC: 2
(241)A39630-121342: RNCC: 5 | RNVC: 2
1PA39630-121342: RNCC: 5 | RNVC: 2

13 Feb 2003

5340-15-125-0689
Fascetta

151250689
PVU6068P: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-005-4497
Anchor Strap

150054497
1276-08-367: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-064-5433
Key

150645433
R8-73247-10: RNCC: 3 | RNVC: 2

30 Jul 1984

5340-15-152-0512
Rdu 180 Re Bracket

151520512
8854 125-151: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-152-1333
Staffa Filtro Aria

151521333
99480836: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-105-6340
Collare Serraggio

151056340
2.4649.010.1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-066-1154
Rod

150661154
01TC21196: RNCC: 3 | RNVC: 2

10 Feb 1986

5340-15-112-8571
Puntalinos

151128571
466968: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-4122
Turnbuckle

150744122
2C16UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-193-9985
Manual Control Lever

151939985
109-0325-76-101: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-052-1744
Control Rod

150521744
506-22-01A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-060-4911
Serratura Compl

150604911
A6151-91003-951: RNCC: 3 | RNVC: 2

15 May 1977

5340-15-004-3896
Turnbuckle Body

150043896
P-160130-001: RNCC: 3 | RNVC: 2
P160130-001: RNCC: 5 | RNVC: 2

27 Jun 1978

5340-15-111-8982
Control Rod

151118982
1P 241990: RNCC: 3 | RNVC: 2
1P 241990: RNCC: 5 | RNVC: 9

25 Mar 1993

5340-15-127-7290
Anello Elastico Fer

151277290
2200-24822: RNCC: 3 | RNVC: 2
2200-24822: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-179-2028
Rod

151792028
79102345: RNCC: 3 | RNVC: 2

18 Jul 2006

5340-15-178-7043
Dust And Moisture Seal Protective Cap-Plug

151787043
W024790: RNCC: 3 | RNVC: 2
(241)A2309W024790: RNCC: 5 | RNVC: 2

19 Oct 2005

5340-15-138-6312
Tirante

151386312
9938373: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-181-0573
Sostegno Elastico

151810573
071341: RNCC: 3 | RNVC: 2
(241)A3593071341: RNCC: 5 | RNVC: 2

10 Oct 2008

5340-15-213-8816
Coppia Scrocchi In

152138816
941-020-15-04: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-188-0078
Half Hinge

151880078
A-082571-001: RNCC: 3 | RNVC: 2

16 Jun 2009

5340-15-213-8831
Kit Fermo A Giorno

152138831
941-000-70: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-009-9007
Cover Plate Access

150099007
1236-31-145: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-059-5625
Perno Cerniera

150595625
03975-001: RNCC: 3 | RNVC: 2

27 Mar 1976

5340-15-100-8101
Semicerniera

151008101
109-0640-52-120: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-138-3486
Tassello

151383486
4121504: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-219-8688
Lucchetto Combinazi

152198688
MM 30: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-221-5148
Supporto Filtro Ari

152215148
069200: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-0426
Blocco Fermo Canna

151180426
D0484645: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-120-9293
Semicerniera

151209293
113A6032-701: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-178-9953
Support

151789953
RS 405 031: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-187-4457
Rode Nd Assy

151874457
109-0110-73-113: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-15-120-8014
Frizione Complessiv

151208014
129-0040-34-101: RNCC: 3 | RNVC: 2

7 Aug 1995

5340-15-231-7742
Staffa Con Perno

152317742
156005: RNCC: 3 | RNVC: 2
534015E088574: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-111-5920
Guide

151115920
A05606-01-20: RNCC: 3 | RNVC: 2
A05606-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-233-3686
Fermo

152333686
826/01431: RNCC: 3 | RNVC: 2
534015E136663: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-158-6149
Semicerniera

151586149
122644298: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-166-5154
Fascetta

151665154
233418: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-007-3801
Fascetta Speciale

150073801
0-55401: RNCC: 3 | RNVC: 2
1PA39630-55401: RNCC: 5 | RNVC: 2

10 Apr 1979

5340-15-116-7938
Manual Control Lever

151167938
DPR24150/2-23-122A124: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-220-0525
Trave Inclinata Ipe

152200525
S1-112D: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-116-0528
Threaded End Tensioning Tie Rod

151160528
1P 503557: RNCC: 3 | RNVC: 2
1P 503557: RNCC: 5 | RNVC: 9

10 Jun 1994

5340-15-115-7170
Supporto Rullo

151157170
D0467418: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-186-8223
Bolttail Rotor Con

151868223
109-0821-96-109: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-207-7094
Supporto Ammortizza

152077094
RAC-6864/01: RNCC: 3 | RNVC: 2
(241)A0069RAC-6864/01: RNCC: 5 | RNVC: 2

12 Nov 2012

5340-15-120-6545
Staffa Per Altoparl

151206545
D4676.0000: RNCC: 5 | RNVC: 2
D4676.0000: RNCC: 5 | RNVC: 9

28 Jul 1995

5340-15-003-7495
Blocchetto Serraggi

150037495
CC0305210/5: RNCC: 3 | RNVC: 2
(241)A0147CC0305210/5: RNCC: 5 | RNVC: 2

20 Nov 2013

5340-15-155-4572
Cerniera A Volonta'

151554572
CBD71280P06: RNCC: 3 | RNVC: 2

26 Mar 2002

5340-15-068-6615
Maniglia Di Brandeg

150686615
27-159-02: RNCC: 3 | RNVC: 2

22 May 1986

5340-15-062-8781
Anello Di Sicurezza

150628781
0-08858: RNCC: 3 | RNVC: 2
0-42630: RNCC: 5 | RNVC: 2

9 Feb 1982

5340-15-121-5761
Engine Accessory Bracket

151215761
1R 516927: RNCC: 3 | RNVC: 2
1R 516927: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-193-5098
Multiple Angle Bracket

151935098
4153T21G02: RNCC: 3 | RNVC: 2
(241)A34604153T21G02: RNCC: 5 | RNVC: 2

26 May 2010

5340-15-148-4448
Dust And Moisture Seal Protective Cap-Plug

151484448
CACHEM10: RNCC: 3 | RNVC: 2
CAE00204: RNCC: 5 | RNVC: 2

11 Aug 1998

5340-15-119-7384
Shaft Threa

151197384
01TL23340: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-141-4398
Resiliente

151414398
Z2820: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-195-8302
Sportello Accesso

151958302
101484: RNCC: 3 | RNVC: 2
(241)A3593101484: RNCC: 5 | RNVC: 2

18 May 2011

5340-15-166-5014
Rh Hinge Half

151665014
113A6031752: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-114-9946
Coperchio Di Blocca

151149946
NOR5-241-03-12-2: RNCC: 3 | RNVC: 2

20 Oct 1992

5340-15-151-9756
Bolt And Spacer Kit

151519756
720-200-203: RNCC: 3 | RNVC: 2

31 Aug 2000

5340-15-155-8244
Multiple Angle Bracket

151558244
4111T18G01: RNCC: 3 | RNVC: 2
4111T18G01: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-204-3223
Telaio

152043223
0000500428470: RNCC: 3 | RNVC: 2
(241)A39630000500428470: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-064-0640
Helical Compression Spring Seat

150640640
1731-46: RNCC: 3 | RNVC: 2
1731-46: RNCC: 5 | RNVC: 9

13 Sep 1983

5340-15-063-3698
Turnbuckle

150633698
60108623: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-116-8602
Supporto Per Microi

151168602
D0466899: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-118-5595
Stella Dentata Per

151185595
D0592940: RNCC: 3 | RNVC: 2

30 Mar 1998

5340-15-195-9190
Headless Straight Rod

151959190
J04841644-001: RNCC: 3 | RNVC: 2
(241)A0019J04841644-001: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-067-7846
Anodo

150677846
D3352/902: RNCC: 2 | RNVC: 2
D3352/902: RNCC: 5 | RNVC: 9

1 Apr 1998

5340-15-197-8785
Antivibrante

151978785
MG-DP-60: RNCC: 3 | RNVC: 2
(241)A4997MG-DP-60: RNCC: 5 | RNVC: 2
UM413309: RNCC: 5 | RNVC: 2

24 May 2004

5340-15-149-4379
Manica Di Bersaglio

151494379
930-20-01: RNCC: 3 | RNVC: 2
930-20-01A: RNCC: 3 | RNVC: 2
(241)A2142930-20-01: RNCC: 5 | RNVC: 2
(241)A2142930-20-01A: RNCC: 5 | RNVC: 2
(7001)5340151494379: RNCC: 5 | RNVC: 2

1 Mar 1999

5340-15-100-5494
Anello Spaccato Spe

151005494
NOR1-289-10-2: RNCC: 3 | RNVC: 2

10 Apr 1987

5340-15-066-4928
Impugnatura A Sfera

150664928
B0040/R11: RNCC: 3 | RNVC: 2

1 Mar 1986

5340-15-121-0970
Threaded End Tensioning Tie Rod

151210970
402M00P01: RNCC: 3 | RNVC: 2
D1286104: RNCC: 5 | RNVC: 2
D1286104: RNCC: 5 | RNVC: 2

23 Jan 1996

5340-15-217-6881
Serie Cacciavite A

152176881
115563200000: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-122-3917
Headless Straight Rod

151223917
D1403608: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-15-105-6338
Collare Serraggio

151056338
4500824: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-178-5094
Cer Table

151785094
73134230: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-074-4400
Turnbuckle

150744400
1A6UNI20210T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-136-5118
Maniglia Portiera

151365118
S6122-82424-4: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-151-5357
Staffa

151515357
0-112038: RNCC: 3 | RNVC: 2
00112038: RNCC: 3 | RNVC: 2
(241)A39630-112038: RNCC: 5 | RNVC: 2
1PA39630-112038: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-200-4263
Set Rondelle

152004263
OMP-TEN-024: RNCC: 3 | RNVC: 2
(241)AE591OMP-TEN-024: RNCC: 5 | RNVC: 2

18 Jan 2006

5340-15-151-9838
Tirante

151519838
0-153403: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-183-3390
Molla

151833390
MOLLA AVVOLGIBILE: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-194-8732
Jcb Cover End

151948732
3298843: RNCC: 3 | RNVC: 2
10/300276: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-007-5173
Cover Plate Access

150075173
1139-03-015: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-102-9507
Gancio

151029507
212-1300-19-1: RNCC: 3 | RNVC: 2

12 May 1995

5340-15-119-3668
Supporto Per Connet

151193668
7-82791-000-79018: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-15-150-6356
Assieme Segnalatore

151506356
39689-001: RNCC: 5 | RNVC: 2
39689-001: RNCC: 5 | RNVC: 9

15 Dec 1999

5340-15-194-8721
Piston

151948721
3149513: RNCC: 3 | RNVC: 2
10/906598: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-106-3256
Staffa

151063256
0-48934: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-111-8885
Double Angle Bracket

151118885
DOR0108162: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-020-2203
Buckle

150202203
01-231M80: RNCC: 3 | RNVC: 2
550.29.51.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-154-9347
Bleed H Cover Assy

151549347
CBD71101G01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-117-7023
Resilient Mount

151177023
1S 575428LB: RNCC: 3 | RNVC: 2
1S 575428LB: RNCC: 5 | RNVC: 9

30 Nov 1994

5340-15-068-5778
Rod End Plain Bearing

5340-15-166-5052
Housing

151665052
31803001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-156-3641
Plate

151563641
CBD71408P16: RNCC: 3 | RNVC: 2
(241)A3460CBD71408P16: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-103-1950
Piastrina

151031950
DE013.13.357: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-061-5550
Access Cover Plate

150615550
1200096-15B000002: RNCC: 5 | RNVC: 2
000200085200: RNCC: 5 | RNVC: 2
000200085200: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-104-8920
Fissaggio Gaffetta

151048920
1161: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-213-5145
Stringicavo Per Fun

152135145
STRINGICAVO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-186-3048
Angolari Plastica (

151863048
ANG02: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-115-8508
Bracket

151158508
244785G1: RNCC: 3 | RNVC: 2
71-73-001-008: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-198-3848
Anello

151983848
M2VAM90S/24: RNCC: 3 | RNVC: 2

24 Sep 2004

5340-15-127-3616
Anello Elastico Arr

151273616
816487: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-156-6309
Turnbuckle

151566309
MM.16-INOX: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-236-1038
Strozzacavo Acciaio

152361038
197-0152: RNCC: 3 | RNVC: 2
534015E143155: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-059-5087
Nut And Bolt Locking Plate

150595087
10-14-98-00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-159-9641
Spring Loaded Cylinder Fastener

151599641
122603513: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-204-3993
Access Door Locking Ring

152043993
082725: RNCC: 3 | RNVC: 2
(241)AD632082725: RNCC: 5 | RNVC: 2

28 Oct 2011

5340-15-206-3397
Manual Control Handle

152063397
8407113: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-181-0860
Fixing Terminal

151810860
106120000: RNCC: 3 | RNVC: 2
(241)A4349106120000: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-15-231-1010
Gancio

152311010
003782: RNCC: 3 | RNVC: 2
534015E122887: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-118-0858
Control Rod

151180858
D0488002: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-111-6111
Cable Clamp

151116111
223-022/25: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-186-2279
Catena Zincata Tipo

151862279
CZG-N-16: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-040-3247
Terminale A Forcell

150403247
5-1811-100-28931-1: RNCC: 3 | RNVC: 2
5-1811-1-00-28931-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-151-7080
Staffa

151517080
0-160326: RNCC: 3 | RNVC: 2
(241)A39630-160326: RNCC: 5 | RNVC: 2
1PA39630-160326: RNCC: 5 | RNVC: 2

3 Jul 2000

5340-15-105-6032
Staffa A Gomito

151056032
4639741: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-116-6241
Assiemelevaascatto

151166241
DPR23414-5: RNCC: 3 | RNVC: 2

22 Nov 1993

5340-15-074-3676
Turnbuckle

150743676
2C6UNI20210T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-114-7766
Front Cover

151147766
560.5055.025: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-139-9519
Chiave Per Serratur

151399519
CS204: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-062-0887
Turnbuckle

150620887
A1091: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-231-7908
Paracolpo Anteriore

152317908
UT/SA/0009/8: RNCC: 3 | RNVC: 2
534015E122756: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-041-2861
Asta A Forcella

150412861
2-6847-100-27049-1: RNCC: 3 | RNVC: 2
2-6847-1-00-27049-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-170-7632
Rubber Plate For Ca

151707632
340-0078/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-113-5112
Dispositivodifissag

151135112
GA4354-00: RNCC: 3 | RNVC: 2

31 Mar 1991

5340-15-192-2949
Access Door Locking Ring

151922949
93190761: RNCC: 3 | RNVC: 2
(241)A424993190761: RNCC: 5 | RNVC: 2

3 Mar 2010

5340-15-178-4936
Dust And Moisture Seal Protective Cap

151784936
308191: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-153-7516
Piastrina

151537516
161-0205/01: RNCC: 3 | RNVC: 2

27 Feb 2001

5340-15-187-4624
Cardine

151874624
270-2922: RNCC: 3 | RNVC: 2
(241)AA136270-2922: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-15-215-0350
Custodia In Pelle

152150350
HLN9665: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-114-7590
Guide Base

151147590
01TL20454-03: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-162-0693
Impressed Cur Anode

151620693
PNS0239: RNCC: 3 | RNVC: 2

28 Dec 2000

5340-15-203-4507
Paracolpo Gomma

152034507
N523G5073202: RNCC: 3 | RNVC: 2
(241)A0126N523G5073202: RNCC: 5 | RNVC: 2

3 Feb 2008

5340-15-166-4925
Fermo

151664925
7600389: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-127-1383
Ghiera Per Fissaggi

151271383
M2132: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-112-0515
Dispositivo Di Supp

151120515
244A1540-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-179-7644
Hardware

151797644
9452117: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-007-0274
Hinge Half

150070274
P-884052-003: RNCC: 3 | RNVC: 2
P884052-003: RNCC: 5 | RNVC: 2

20 Nov 1979

5340-15-152-3320
Piastrina

151523320
0-158773: RNCC: 3 | RNVC: 2
00158773: RNCC: 3 | RNVC: 2
(241)A39630-158773: RNCC: 5 | RNVC: 2
1PA39630-158773: RNCC: 5 | RNVC: 2

31 Aug 2000

5340-15-220-0467
Piatto 100 Sp6 L104

152200467
S1-9A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-199-7997
Piattello Di Spalla

151997997
D0475762: RNCC: 3 | RNVC: 2
(241)A0461D0475762: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-15-074-4203
Turnbuckle

150744203
2B16UNI2019AQ34UNI673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-195-9140
Angle Bracket

151959140
J04841103-001: RNCC: 3 | RNVC: 2
(241)A0019J04841103-001: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-193-9611
Reinforcement Plate

151939611
S61-0920-13-124: RNCC: 3 | RNVC: 2
(241)A0126S61-0920-13-124: RNCC: 5 | RNVC: 2

4 Aug 2010

5340-15-112-1523
Extension Drawer Slide

151121523
AT-ZRN-15M: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-174-7559
Mat. Consume Per Ib

151747559
58634-90/001: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-061-8133
Fascetta Speciale

150618133
0-46313: RNCC: 3 | RNVC: 2
00046313: RNCC: 3 | RNVC: 2
(241)A39630-46313: RNCC: 5 | RNVC: 2
1PA39630-46313: RNCC: 5 | RNVC: 2

30 Nov 1982

5340-15-068-4388
Metal Runner

150684388
SH 4190-803: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-060-6091
Piastrina Guidacavo

150606091
63370-102: RNCC: 3 | RNVC: 2

17 Jun 1977

5340-15-074-3675
Turnbuckle

150743675
2C30UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-119-3164
Carter De Protectio

151193164
9431893: RNCC: 3 | RNVC: 2

11 Jul 1994

5340-15-166-5130
Serratura Infilare

151665130
SRTINFMM40240: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-113-8589
Threaded End Tensioning Tie Rod

151138589
1Z 592487LF: RNCC: 3 | RNVC: 2
1Z 592487LF: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-116-4961
Dust And Moisture Seal Protective Cap-Plug

151164961
60160893: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-166-5222
Braket

151665222
83469310: RNCC: 3 | RNVC: 2
83469310: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-108-8864
Resiliente

151088864
VZA-D-AVU/1000: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-151-4356
Forcella

151514356
042104733: RNCC: 3 | RNVC: 2
(241)A39630-117097: RNCC: 5 | RNVC: 2
0-117097: RNCC: 5 | RNVC: 2
1PA39630-117097: RNCC: 5 | RNVC: 2

24 May 2000

5340-15-068-9677
Guida Per Cartuccia

150689677
32-02-324: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-15-222-2187
Terminale Guaina

152222187
S205-6-126-03: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-157-9557
Manicotto Diritto T

151579557
999-8001-16-515: RNCC: 3 | RNVC: 2

2 Dec 2003

5340-15-109-5306
Dust And Moisture Seal Protective Plug

151095306
GB488-002-000: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-114-4057
Attacco Compl.

151144057
212-7600-41-1: RNCC: 3 | RNVC: 2

19 May 1994

5340-15-170-8559
Lastra Sp. 1.00Mm P

151708559
58211-01/002: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-213-6674
Squadretta In Allum

152136674
0421: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-101-7839
Fascetta Speciale

151017839
SC32674.80S: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-113-4674
Piastrina

151134674
129-0110-91-101: RNCC: 3 | RNVC: 2

17 Jun 1991

5340-15-041-8364
Fascetta

150418364
7-4411-200-43467: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-050-1506
Calzatura Filettata

150501506
4-3351-201-41865-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-041-1017
Forcella D'estremit

150411017
7-8145-200-27549-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-149-3695
Cover

151493695
518-02-3320: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-127-3737
Anello Elastico Spi

151273737
1315-18-011: RNCC: 3 | RNVC: 2
1315-18-011: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-207-4564
Antipilferage Seal

152074564
NEPTUNESEAL: RNCC: 3 | RNVC: 2
(241)AG974NEPTUNESEAL: RNCC: 5 | RNVC: 2

11 Oct 2012

5340-15-053-7313
Collare

150537313
539996: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-103-1089
Speciale Guida

151031089
L4850009: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.375: RNCC: 5 | RNVC: 2
DE160.03.375: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-203-4496
Rh Angle Assembly

152034496
N523G5454101: RNCC: 3 | RNVC: 2
(241)A0126N523G5454101: RNCC: 5 | RNVC: 2

3 Feb 2008

5340-15-063-8846
Helical Compression Spring Seat

150638846
56019: RNCC: 3 | RNVC: 2
(241)A017856019: RNCC: 5 | RNVC: 2

21 Mar 1995

5340-15-175-1457
Spring Retain Plate

151751457
10C-023REF121: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-102-1045
Dispositivo Di Chiu

151021045
193-0484/24: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-152-2802
Electrical-Me Post

151522802
E2870-0000: RNCC: 5 | RNVC: 2
E2870-0000: RNCC: 5 | RNVC: 9

17 Aug 2000

5340-15-107-5064
Metal Runner

151075064
7302382: RNCC: 3 | RNVC: 2
(7001)5340151075064: RNCC: 5 | RNVC: 2
7302382: RNCC: 5 | RNVC: 2
5340151075064: RNCC: 8 | RNVC: 2

30 Mar 1988

5340-15-109-9003
Settore

151099003
467819: RNCC: 3 | RNVC: 2
D0467819: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-156-2036
Bracket

151562036
(241)A3460CBD71207P02: RNCC: 3 | RNVC: 2
CBD71207P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-156-3905
Plate

151563905
(241)A3460CBD70765P03: RNCC: 3 | RNVC: 2
CBD70765P03: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-198-0708
Gigleur

151980708
A114: RNCC: 3 | RNVC: 2
(241)A3238A114: RNCC: 5 | RNVC: 2

10 Jun 2004

5340-15-003-1514
Multiple Angle Bracket

150031514
5949789185: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-059-4729
Resilient Mount

150594729
13-50-22-00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-121-4500
Resilient Mount

151214500
VZA-R-AVU/500: RNCC: 3 | RNVC: 2

26 Mar 1996

5340-15-050-0338
Distanziatore

150500338
3493-16: RNCC: 3 | RNVC: 2
3493-16: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-064-6861
Hinge

150646861
P-175606-001: RNCC: 3 | RNVC: 2
P175606-001: RNCC: 5 | RNVC: 2

10 Jun 1984

5340-15-068-3329
Supporto Semianello

150683329
OD136K026: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-103-1998
Blocchetto

151031998
DE069.31.062: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-115-9224
Threaded End Tensioning Tie Rod

151159224
UL400851P0001: RNCC: 3 | RNVC: 2

11 May 1996

5340-15-154-9329
Dust And Moisture Seal Protective Cap-Plug

151549329
CBD71063G01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-163-2909
Dust And Moisture Seal Protective Cap Set

151632909
9000.130: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-052-9085
Mezza Cerniera

150529085
204-4610-19-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-213-8661
Serratura Ad Infila

152138661
710-70-20: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-055-3372
Turnbuckle

150553372
IB27UNI2020X15CN1808-4047: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-150-3243
Resilient Mount

151503243
VZA-R-AVU 1000-5.8: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-15-157-4780
Dust And Moisture Seal Protective Cap-Plug

151574780
(241)S346520000-464: RNCC: 3 | RNVC: 2
2 0000-464: RNCC: 3 | RNVC: 2

7 Aug 2003

5340-15-210-6691
Linguetta A Disco

152106691
UNI6606-4X6.5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-189-9442
Fascetta A Regolazi

151899442
UA2902-04P: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-120-6865
Coperchio Per Filtr

151206865
D0483235: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-122-6429
Tappo

151226429
30C087P001: RNCC: 3 | RNVC: 2

15 Oct 1998

5340-15-191-8785
Cerniera Sportello

151918785
10-1061: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-121-7706
Gancio

151217706
205-8130-21-1: RNCC: 3 | RNVC: 2

19 Feb 1996

5340-15-166-4989
Hinge Half Lh

151664989
212A7105001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-121-9052
Piastra Con Inserti

151219052
142506013: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-156-2037
Bracket

151562037
(241)A3460CBD71194P02: RNCC: 3 | RNVC: 2
CBD71194P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-101-7989
Fis Gaffetta Compl.

151017989
A6107-99014-2: RNCC: 3 | RNVC: 2

5 Oct 1987

5340-15-199-4104
Set Dischi Freno

151994104
64599100477D/13: RNCC: 3 | RNVC: 2
(241)A487464599100477D/13: RNCC: 5 | RNVC: 2

21 Mar 2005

5340-15-206-7098
Lower Plate

152067098
109-3101-14-3: RNCC: 3 | RNVC: 2

4 Jul 2012

5340-15-194-6070
Multiple Angle Bracket

151946070
109-886-79-101: RNCC: 3 | RNVC: 2

14 Dec 2010

5340-15-068-5052
Semicerniera Compl

150685052
212-4600-12-7: RNCC: 3 | RNVC: 2

9 Dec 1985

5340-15-174-7551
30 2Cu 17U Fr4 0

151747551
58572-05/215: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-152-9399
Headless Straight Rod

151529399
48050000009/13: RNCC: 3 | RNVC: 2

9 Nov 2000

5340-15-108-8023
Helical Compression Spring Seat

151088023
9919836: RNCC: 3 | RNVC: 2
750649-12: RNCC: 3 | RNVC: 2
75064912: RNCC: 3 | RNVC: 2
750649-12: RNCC: 5 | RNVC: 9
75064912: RNCC: 5 | RNVC: 9

20 Apr 1988

5340-15-056-5717
Helical Compression Spring Seat

150565717
1376-15-226: RNCC: 3 | RNVC: 2
137615226: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-115-1578
Protection Rubber

151151578
06/734/010: RNCC: 5 | RNVC: 2
06/734/010: RNCC: 5 | RNVC: 9
06/734/010: RNCC: 5 | RNVC: 9

29 Nov 1992

5340-15-119-2440
Piastrina Di Fermo

151192440
212-7721-83-5: RNCC: 3 | RNVC: 2

31 May 1995

5340-15-154-1952
Double Angle Bracket

151541952
0-162990: RNCC: 3 | RNVC: 2
(241)A39630-162990: RNCC: 5 | RNVC: 2
1PA39630-162990: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-008-2707
Angolare

150082707
204-0950-45-2: RNCC: 3 | RNVC: 2

1 Feb 1982

5340-15-119-5424
Piastrina Anteriore

151195424
D0481794: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-132-9935
Control Rod

151329935
7846: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-191-5738
Mounting Antivibrat

151915738
781087: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-151-2239
Manual Control Lever

151512239
DV0002713: RNCC: 3 | RNVC: 2

2 May 2000

5340-15-179-7863
Compasso Arresto Po

151797863
A7914-A1: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-154-1139
Staffa

151541139
0-170619: RNCC: 3 | RNVC: 2
1PA39630-170619: RNCC: 5 | RNVC: 2
(241)A39630-170619: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-118-5105
Helical Compression Spring Seat

151185105
B20/14: RNCC: 3 | RNVC: 2

23 Jan 1995

5340-15-054-0217
Ammortizzatore

150540217
3037-82587: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-152-2841
Tige De Flasque

151522841
0391800304: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-166-5192
Attacco

151665192
S6132801392: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-218-5206
Maniglia Nera

152185206
MANIGLIA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-005-1083
Cover Plate Access

150051083
1137-10-158: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-117-9099
Headless Grooved Rod

151179099
433A1221-001: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-009-3746
Maniglia

150093746
1-2-0367: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-001-8813
Anello Tennifer Usc

150018813
11010394: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-215-4922
Supporto Per Anelli

152154922
7896G: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-136-3323
Snodo Sferico

151363323
33B031P009: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-215-3766
Cintino Avvolgibile

152153766
CINTINO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-215-0552
Tassello

152150552
01976: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-112-0372
Staffa

151120372
29280-200-202: RNCC: 3 | RNVC: 2
04712601: RNCC: 5 | RNVC: 2
4712601: RNCC: 5 | RNVC: 2

7 Sep 1991

5340-15-218-9277
Strap

152189277
767-1935-009: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-162-2870
Adattatore Speciale

151622870
K113-101-001: RNCC: 3 | RNVC: 2

25 Jun 2001

5340-15-054-0757
Semicerniera Portel

150540757
260-18-19-11: RNCC: 3 | RNVC: 2
260-18-19-11: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-111-6045
Pin

151116045
SF260-01-73-11: RNCC: 3 | RNVC: 2
SF260-01-73-11: RNCC: 5 | RNVC: 9

7 Sep 1989

5340-15-112-0442
Dispositivo Di Supp

151120442
265A2014-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-154-9344
H.P. Injector Assy

151549344
CBD71097G01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-174-7485
Piatto 125X30 Peals

151747485
54130-01/389: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-100-7038
Fascetta Con Guaina

151007038
808-82811-10A: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-15-179-0251
Pin Hinge

151790251
P-135197-005: RNCC: 3 | RNVC: 2

7 Apr 2006

5340-15-203-0559
Griglia Ingresso Ar

152030559
7800109: RNCC: 3 | RNVC: 2
(241)A50097800109: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-222-2257
Spessore Distanzial

152222257
S1-143M: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-005-1493
Clamp Loop

150051493
211-501-9121: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-074-4054
Turnbuckle

150744054
1B10UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-054-6227
Turnbuckle

150546227
AF107-05E104: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-110-2221
Supportocerniera

151102221
13933-101A00: RNCC: 3 | RNVC: 2
13933-101: RNCC: 5 | RNVC: 2
13933-101A00: RNCC: 5 | RNVC: 9
13933-101: RNCC: 5 | RNVC: 9

12 Jul 1990

5340-15-217-2460
Lucchetto Corbin An

152172460
L201-90-00: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-162-3954
Dust And Moisture Seal Protective Cap

151623954
EC-12: RNCC: 3 | RNVC: 2

16 Aug 2001

5340-15-144-9556
Access Door Locking Ring

151449556
4823212: RNCC: 3 | RNVC: 2
A322010-010: RNCC: 5 | RNVC: 2
(7001)5340151449556: RNCC: 5 | RNVC: 2

24 Feb 1997

5340-15-103-4660
Fle Treccia In Rame

151034660
99991005: RNCC: 3 | RNVC: 2
99991005: RNCC: 5 | RNVC: 9

12 Apr 1988

5340-15-103-2067
Piastrina Di Sicure

151032067
L6330058: RNCC: 3 | RNVC: 2
DE160.03.136: RNCC: 5 | RNVC: 2
(241)A5015DE160.03.136: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-105-6322
Collare Serraggio

151056322
70-2470-54: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-134-4036
Staffa

151344036
58823754: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-219-7330
Retina Per Rullo Gr

152197330
RETINA-RULLO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-2450
Coupling

151152450
518071260: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-111-6035
Holder

151116035
A02655-01-08: RNCC: 3 | RNVC: 2
A02655-01-08: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-220-0527
Distanz.Travi Tubol

152200527
S1-113A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-006-2722
Piastra Speciale

150062722
0-33594: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-213-8751
Tappo Interno Per N

152138751
MA4625: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-122-1527
Threaded End Tensioning Tie Rod

151221527
D0491476: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-154-1767
Ingranaggio

151541767
130333-2: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-220-0055
Stop Con Occhiello

152200055
S010: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-061-2023
Rubber Bumper

150612023
109-0320-40-2: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-15-214-2352
Fascette

152142352
FASCETTEMISUREVARIE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-162-9782
Retainer

151629782
60158439: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-15-205-0239
Dust And Moisture Seal Protective Cap

152050239
723029591700: RNCC: 3 | RNVC: 2
(241)A1140723029591700: RNCC: 5 | RNVC: 2

13 Feb 2012

5340-15-189-2563
Dust And Moisture Seal Protective Cover

151892563
0027503120: RNCC: 3 | RNVC: 2
0027503120: RNCC: 5 | RNVC: 2
0027503120: RNCC: 5 | RNVC: 2

10 Feb 2010

5340-15-107-0725
Resilient Mount

151070725
MM100: RNCC: 3 | RNVC: 2
51-653: RNCC: 5 | RNVC: 2
(241)A3290MM100: RNCC: 5 | RNVC: 2
0013206: RNCC: 5 | RNVC: 2

20 Sep 1991

5340-15-106-9543
Supporto

151069543
1364644: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-206-4392
Lamiera Grecata

152064392
3-3053: RNCC: 3 | RNVC: 2
(241)AF0513-3053: RNCC: 5 | RNVC: 2

11 Jun 2012

5340-15-005-5341
Dust And Moisture Seal Protective Cap

150055341
1137-05-326: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-055-5375
Compasso Per Porte

150555375
1971TAV89-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-199-9281
Threaded End Tensioning Tie Rod

151999281
04-10-2405-41-F: RNCC: 3 | RNVC: 2
(241)A098404-10-2405-41-F: RNCC: 5 | RNVC: 2

27 Jul 2005

5340-15-194-8726
Plug Oil Level

151948726
70590: RNCC: 3 | RNVC: 2
10/906402: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-198-7570
Semicerniera Portel

151987570
129-0640-21-104: RNCC: 3 | RNVC: 2
(241)A0126129-0640-21-104: RNCC: 5 | RNVC: 2

16 Nov 2004

5340-15-170-8356
Lh Rear Side Handle

151708356
341-4589/02.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-158-6517
Saldata Maniglia

151586517
162511916: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-15-150-9937
Nastro Di Bloccagg

151509937
500301965: RNCC: 3 | RNVC: 2

21 Feb 2000

5340-15-147-3530
Guide

151473530
109-0360-20-122: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-186-1889
Raccordo Diritto

151861889
S-14-924063002: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-177-6300
Carter Legs 1-4

151776300
36357: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-062-8722
Anello Speciale

150628722
0-42564: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-156-3664
L.P.T. Stat Support

151563664
(241)A3460CBD71405P13: RNCC: 3 | RNVC: 2
CBD71405P13: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-006-1448
Striscia Di Fissagg

150061448
95316-115A1: RNCC: 3 | RNVC: 2

17 Sep 1979

5340-15-074-4325
Turnbuckle

150744325
2B6UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-212-7765
Gommino

152127765
44754: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-074-4329
Turnbuckle

150744329
2B16UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-136-1029
Anello Spallamento

151361029
15-60-08: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-066-7590
Gruppo Ghiera

150667590
371378: RNCC: 2 | RNVC: 2
D0371378: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-116-9748
Launcher Protection

151169748
W016750: RNCC: 3 | RNVC: 2

3 May 1996

5340-15-122-5569
Righ Panel

151225569
01TL21026-03: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-120-6759
Speci Asta Graduata

151206759
D1401596: RNCC: 3 | RNVC: 2

29 Jun 1996

5340-15-007-3324
Double Angle Bracket

150073324
1276-18-432: RNCC: 3 | RNVC: 2
127618432: RNCC: 5 | RNVC: 2

22 Jul 1999

5340-15-060-6086
Piastrina Guidacavo

150606086
62655-102A1: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-15-210-7033
Filetto Riportato 6

152107033
512407: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-007-2579
Vetro Laminato P

150072579
1385157: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-007-9981
Helical Compression Spring Seat

150079981
760489: RNCC: 3 | RNVC: 2
760489: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-213-8814
Asta E Copertura Su

152138814
941 00 20 5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-8472
Unavailable

150018472
ED0027505040-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-166-4937
Tassello Mm.8

151664937
364008: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-113-9747
Helical Compression Spring Seat

151139747
42492724: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-114-9680
Dust And Moisture Seal Protective Plug

151149680
108273: RNCC: 3 | RNVC: 2

8 Mar 1993

5340-15-101-2994
Hinge Half

151012994
P180173-401: RNCC: 3 | RNVC: 2

30 Jan 1988

5340-15-196-6311
Padlock

151966311
PN UAS 00019333: RNCC: 3 | RNVC: 2
5440F76026690: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-110-8002
Supportoperraccordo

151108002
05085-101A00: RNCC: 3 | RNVC: 2
05085-101: RNCC: 5 | RNVC: 2

3 Aug 1990

5340-15-067-7845
Maniglia

150677845
D4055-901: RNCC: 2 | RNVC: 2
D4055-901: RNCC: 5 | RNVC: 9

1 Apr 1998

5340-15-102-1031
Gomma Cinghia

151021031
193-0487/25: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-156-4873
Dispositivo Di Chiu

151564873
0-121451: RNCC: 3 | RNVC: 2
(241)A39630-121451: RNCC: 5 | RNVC: 2
1PA39630-121451: RNCC: 5 | RNVC: 2

13 Feb 2003

5340-15-193-4472
Gancio Per Fissaggi

151934472
504251678: RNCC: 3 | RNVC: 2
(241)A4249504251678: RNCC: 5 | RNVC: 2

13 May 2010

5340-15-166-4960
Cover

151664960
201CA2901TR2: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-160-0008
Padlock

151600008
F720038161: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-213-0482
Ruota Fissa Per Car

152130482
236-8263: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-7653
Nut And Bolt Locking Plate

151187653
4604941: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-156-3672
Lock Lower Support

151563672
(241)A3460CBD71405P06: RNCC: 3 | RNVC: 2
CBD71405P06: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-074-4023
Turnbuckle

150744023
1A64UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-105-6033
Staffa A Gomito

151056033
4549477: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-5976
Staffa A Gomito

151055976
4950629: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-062-8559
Fascetta Speciale

150628559
0-06893: RNCC: 3 | RNVC: 2
(241)A39630-06893: RNCC: 5 | RNVC: 2
1PA39630-06893: RNCC: 5 | RNVC: 2

9 Feb 1982

5340-15-074-4224
Turnbuckle

150744224
2C8UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-153-1349
Buckle

151531349
204-8120-11-2: RNCC: 3 | RNVC: 2

29 Nov 2000

5340-15-049-5165
Forcella Destremita

150495165
7-8145-200-27549-4: RNCC: 3 | RNVC: 2
7-8145-2-00-27549-4: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-127-2712
Staffetta

151272712
708993: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-147-3065
Roller Ball

151473065
KU22/B: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-206-8514
Co-Ordiinating Arm

152068514
21310084: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-185-7940
Estrattore Per Viti

151857940
ESTRATTOREGR5: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-054-8422
Helical Compression Spring Seat

150548422
533-56-1250: RNCC: 3 | RNVC: 2

7 Oct 1981

5340-15-062-7025
Dust And Moisture Seal Protective Plug

150627025
899.502.850.4: RNCC: 3 | RNVC: 2
1731883: RNCC: 5 | RNVC: 2
9931503: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-158-3500
Helical Compression Spring Seat

151583500
DN100PN16H2-8: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-15-169-2195
Lucchetto P.

151692195
F72009186: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-174-7417
Film Spesso Militar

151747417
344-0207/01.04: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-001-8571
Molla Valvola

150018571
AC100-126: RNCC: 3 | RNVC: 2
AC100-126: RNCC: 5 | RNVC: 9

10 Apr 1974

5340-15-177-5871
Adapter

151775871
COL58/18-08: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-109-8476
Metal Runner

151098476
210297/13: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-204-4895
Clamp Half

152044895
42563774: RNCC: 3 | RNVC: 2
7118858: RNCC: 5 | RNVC: 2
CV179053A: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-154-1458
Piastra

151541458
0-115164: RNCC: 3 | RNVC: 2
00115164: RNCC: 3 | RNVC: 2
(241)A39630-115164: RNCC: 5 | RNVC: 2
1PA39630-115164: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-074-4185
Turnbuckle

150744185
2A8UNI20190T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-061-2103
Rim Clen Clamp (1)

150612103
L304BI: RNCC: 5 | RNVC: 2
1200096-1131E0000: RNCC: 5 | RNVC: 2
L304BI: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-166-4928
Staffa Per Asta Mot

151664928
9635348: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-007-0770
Anello Elastico Spe

150070770
0-05741: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-055-4930
Semicerniera

150554930
260-01-55-25: RNCC: 3 | RNVC: 2
260-01-55-25: RNCC: 5 | RNVC: 9

1 Jun 1987

5340-15-100-5557
Threaded End Tensioning Tie Rod

151005557
39A831-12-01-01A: RNCC: 3 | RNVC: 2

11 Mar 1987

5340-15-110-8004
Supportorigido

151108004
96223-800A00: RNCC: 3 | RNVC: 2
96223-800: RNCC: 5 | RNVC: 2

6 Aug 1990

5340-15-199-9893
Membrana

151999893
3007627: RNCC: 3 | RNVC: 2
2735001: RNCC: 5 | RNVC: 2
(241)AF2323007627: RNCC: 5 | RNVC: 2

24 Aug 2005

5340-15-001-2945
Coordinating Arm

150012945
21310121: RNCC: 3 | RNVC: 2
131-0002 ITEM 2: RNCC: 5 | RNVC: 2

17 Jun 2013

5340-15-135-8459
Tappo Di Sughero

151358459
LLLS731TYIGRACL1N1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-110-1026
Barra Di Torsione S

151101026
C129903-4: RNCC: 3 | RNVC: 2

10 Apr 1990

5340-15-020-3857
Golfare Ad Occhio C

150203857
02-231E22-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-170-7757
Bracket

151707757
341-0164/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-204-4337
Handle

152044337
26HJ04143043S01-801/038: RNCC: 3 | RNVC: 2
(241)A001926HJ04143043S01-801/03: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-009-2570
Semicerniera

150092570
P-882734-002: RNCC: 3 | RNVC: 2

20 Aug 1980

5340-15-158-6116
Control Rod

151586116
122607228: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-059-7257
Elemento Chiavistel

150597257
04595-101A1: RNCC: 3 | RNVC: 2

19 Jun 1976

5340-15-064-7235
Rubber Bumper

150647235
42045067: RNCC: 3 | RNVC: 2

17 Nov 1983

5340-15-136-0131
Lucchetti Blocc. Di

151360131
LUCCHETTIBLOCDISCOTELEF.: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-008-4569
Cover Plate Access

150084569
4451150: RNCC: 3 | RNVC: 2
4451150: RNCC: 5 | RNVC: 9

29 Sep 1980

5340-15-051-4198
Nastro Ritegno

150514198
4030168: RNCC: 3 | RNVC: 2
4030168: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-116-4884
Double Angle Bracket

151164884
98416024: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-109-7883
Dust And Moisture Seal Protective Cap-Plug

151097883
328789P1: RNCC: 3 | RNVC: 2

11 Nov 1988

5340-15-108-5065
Helical Compression Spring Retainer

151085065
90.6400.28: RNCC: 3 | RNVC: 2

8 May 1989

5340-15-121-5773
Engine Accessory Bracket

151215773
1S 556084LA: RNCC: 3 | RNVC: 2
1S 556084LA: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-195-4132
Cinghia

151954132
200800007.15300: RNCC: 3 | RNVC: 2
(241)A6114200800007.15300: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-065-9837
Supporto Elastico

150659837
14009014A: RNCC: 3 | RNVC: 2

21 May 1985

5340-15-113-2400
Staffacomplessivo

151132400
252A2304-403: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-063-6364
Cover Plate Access

150636364
820.04: RNCC: 3 | RNVC: 2
9926176: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-206-0285
Blocco Di Sicurezza

152060285
62254: RNCC: 3 | RNVC: 2
(241)A348862254: RNCC: 5 | RNVC: 2

4 May 2012

5340-15-155-4891
Insert Ela Pin Assy

151554891
CBD71192G01: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-175-2068
Sealing Plug Assembly

151752068
TPF-3: RNCC: 3 | RNVC: 2
(241)A8867TPF-3: RNCC: 5 | RNVC: 2

4 Feb 2004

5340-15-117-4663
Corrosion Preventive Anode

151174663
11.2361-R/3: RNCC: 3 | RNVC: 2

14 Jun 1994

Load More Results