What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 64 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 64 of 72

5340-15-111-3442
Ritegno

151113442
109-0131-17-1: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-051-4085
Staffa

150514085
4553831: RNCC: 3 | RNVC: 2
4553831: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-216-3142
Turnbuckle

152163142
071392191: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-040-6551
Fascetta S

150406551
1-2755-125-28466-1: RNCC: 3 | RNVC: 2
1-2755-1-25-28466-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-064-7000
Bracket

150647000
A-125223-002: RNCC: 3 | RNVC: 2
A125223-002: RNCC: 5 | RNVC: 2

10 Jun 1984

5340-15-115-2299
Pin

151152299
518031830: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-112-8583
Pattino

151128583
466908: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-158-4313
Speciale Cerniera

151584313
302CR: RNCC: 3 | RNVC: 2
(241)A3238302CR: RNCC: 5 | RNVC: 2

12 Feb 2004

5340-15-074-4143
Turnbuckle

150744143
1D12UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-109-0719
Ritegno Boccola

151090719
128472: RNCC: 3 | RNVC: 2

5 Jan 1990

5340-15-168-9777
Padlock

151689777
F72003816: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-114-7941
Supporto

151147941
8932.10.14: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-235-6316
Piedino Livellament

152356316
95298550: RNCC: 3 | RNVC: 2
534015E077329: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-126-5198
Molla

151265198
49-952-58: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-101-7818
Fascetta Speciale

151017818
SC32674.51: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-116-8571
Piastra Con Tappi

151168571
D1302622: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-116-9825
Collare Di Fissaggi

151169825
128.001: RNCC: 3 | RNVC: 2
128.001: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-15-148-2483
Tappo Per Cassetta

151482483
W005241: RNCC: 3 | RNVC: 2
(7001)5340151482483: RNCC: 5 | RNVC: 2

26 Aug 1998

5340-15-178-6865
Blank Drawer

151786865
A157827-1: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-005-9975
Leva

150059975
20004-018-00: RNCC: 3 | RNVC: 2

11 Aug 1979

5340-15-106-0649
Scodellino Molla

151060649
000.7139.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-153-7251
Base (1) Per Sosteg

151537251
142030169: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-007-3816
Tappo Speciale

150073816
1-1553180: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-112-9436
Staffaperfascettafi

151129436
21360028A: RNCC: 3 | RNVC: 2

20 Apr 1996

5340-15-123-6219
Grillo Ad U Diritto

151236219
2233-5/8: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-100-7384
Ammortizzatore In G

151007384
A126888: RNCC: 3 | RNVC: 2

17 Jun 1987

5340-15-118-6290
Plug Drain

151186290
092270: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-112-8471
Gabbiar

151128471
473418: RNCC: 3 | RNVC: 2
D0473418: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-149-1661
Collare Fissaggio

151491661
970491: RNCC: 3 | RNVC: 2

10 Dec 1998

5340-15-173-0883
Cilindro Cisa

151730883
07077/18: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-118-6068
Arbre

151186068
73136831: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-102-8078
Testa Di Tirante Fi

151028078
232A1987-403: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-020-1175
Buckle

150201175
04-071-030-10-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-119-3134
Impugnatura Special

151193134
244A1222-001: RNCC: 3 | RNVC: 2

11 Jul 1994

5340-15-216-8881
Fermaglio Di Retuna

152168881
839-280: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-062-4713
Eye End Alignment

150624713
MRA818-407: RNCC: 3 | RNVC: 2

5 Apr 1982

5340-15-170-3515
Clevis

151703515
206-010-348-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-119-8867
C Retainer

151198867
P-853093-001: RNCC: 3 | RNVC: 2
P853093-001: RNCC: 5 | RNVC: 2

17 Nov 1994

5340-15-009-3319
Corpo Chiavistello

150093319
P-884035-001: RNCC: 3 | RNVC: 2

12 Sep 1980

5340-15-194-6348
Brake Lever

151946348
7001701: RNCC: 3 | RNVC: 2

16 Dec 2010

5340-15-166-4876
Braccio Snodabile D

151664876
75091456: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-212-2693
Morsetti

152122693
EX5340RI4805177: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-166-5255
Telaio

151665255
542146: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-074-3670
Turnbuckle

150743670
2C12UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-180-5909
Mensola

151805909
61698222: RNCC: 3 | RNVC: 2
(241)A007161698222: RNCC: 5 | RNVC: 2

24 Jun 2008

5340-15-074-4223
Turnbuckle

150744223
2C6UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-051-0821
Turnbuckle

150510821
10142: RNCC: 3 | RNVC: 2

10 Apr 1970

5340-15-111-5939
Holder Plate

151115939
A02586-01-22: RNCC: 3 | RNVC: 2
A02586-01-22: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-237-1312
Ruote Per Supporto

152371312
5800N0190: RNCC: 3 | RNVC: 2
534015E040771: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-119-6541
Filetto Riportato

151196541
NOR2-110-00-9-125CN13E5: RNCC: 3 | RNVC: 2

12 Oct 1994

5340-15-102-3176
Flange Kit

151023176
7.275.872: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-231-1144
Lucchetto Ad Arco C

152311144
4142: RNCC: 3 | RNVC: 2
534015E089900: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-217-6892
Lancia Express

152176892
D.22: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-220-5899
Cilindro 60 Ovale C

152205899
CILINDROOVALE: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-138-4969
Fascetta Mta Fiat U

151384969
6012310: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-142-0751
Handwheel

151420751
W002556: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-211-4898
Piombo Per Sigillar

152114898
PIOMBOMM10: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-175-0476
Snap Hook

151750476
24030: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-149-8201
Manual Control Lever

151498201
129112: RNCC: 3 | RNVC: 2
0052614: RNCC: 5 | RNVC: 2
52614: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-106-3189
Chiavistello

151063189
5086-03-32: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-122-5534
Fork Bush

151225534
01TL21211-01: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-109-4842
Corrosion Preventive Anode

151094842
3-2202-R3: RNCC: 3 | RNVC: 2
1P 513248: RNCC: 3 | RNVC: 2
1P 513248: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-220-0497
Telaio Supporto Bas

152200497
S1-28A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-233-3231
Supporto Antivibran

152333231
CABO/11: RNCC: 3 | RNVC: 2
534015E155595: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-185-7012
Fisher In Metallo D

151857012
FISHERMETALLO/DIAM.M8: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-074-4011
Turnbuckle

150744011
1AUNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-114-9251
Sadd Pipe Support

151149251
CS30200014: RNCC: 3 | RNVC: 2

10 Feb 1994

5340-15-118-0414
Contenitore Per Ast

151180414
D0484623: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-127-4919
Molla Richiamo Stan

151274919
860067: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-147-5786
Nippel

151475786
98NI985: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-231-1133
Erratura Da Infilar

152311133
7403: RNCC: 3 | RNVC: 2
534015E075478: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4275
Turnbuckle

150744275
1A72UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-120-6931
Fondello Per Scatol

151206931
D0468363: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-195-5934
Tampone Ammortizzat

151955934
219AE3169-139: RNCC: 3 | RNVC: 2
(241)A0126219AE3169-139: RNCC: 5 | RNVC: 2

8 Apr 2011

5340-15-006-9152
Control Rod

150069152
510-12-54: RNCC: 3 | RNVC: 2

12 Jan 1977

5340-15-187-4409
Plate(Rh)

151874409
109-0041-27-102: RNCC: 3 | RNVC: 2

31 Mar 2009

5340-15-201-0108
Latch

152010108
3152026-01: RNCC: 3 | RNVC: 2

10 May 2006

5340-15-198-5204
Fermi Per Superfici

151985204
SF260-00-371-01: RNCC: 3 | RNVC: 2

7 Oct 2004

5340-15-237-7311
Maniglia A Barra In

152377311
36738212: RNCC: 3 | RNVC: 2
534015E081252: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-169-6143
Lucchetto C.

151696143
F72015700: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-136-5446
Flangia

151365446
0-28386: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-4893
Gancio A Molla

151664893
557185: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-157-2430
Portacalzatoia Dest

151572430
DE013.14.072: RNCC: 3 | RNVC: 2
(241)A5015DE013.14.072: RNCC: 5 | RNVC: 2

9 Jun 2003

5340-15-193-1465
Supporto Per Portel

151931465
504124259: RNCC: 3 | RNVC: 2
(241)A4249504124259: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-176-7910
Confezione Fisher D

151767910
FISBOI14: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-150-3767
Piastrina Ritegno D

151503767
60159577: RNCC: 3 | RNVC: 2

7 Oct 1999

5340-15-179-0036
Plate

151790036
RS 413 777 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-148-8587
Gancio Cofano Motor

151488587
101-18-60: RNCC: 3 | RNVC: 2

13 Oct 1998

5340-15-157-9185
Double Angle Bracket

151579185
0-163959: RNCC: 3 | RNVC: 2
1PA39630-163959: RNCC: 5 | RNVC: 2
(241)A39630-163959: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-147-9977
Base Dentata

151479977
129-0640-86-121: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-057-3338
Electrical-Me Post

150573338
1127-27-125: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-134-3225
Perno A Estrazione

151343225
A34039-100: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-153-3317
Threaded End Tensioning Tie Rod

151533317
230822218: RNCC: 3 | RNVC: 2
A80UNI2023-AQ34-673ZNNI: RNCC: 5 | RNVC: 2

14 Dec 2000

5340-15-174-7350
Protective Cap

151747350
825-5207-004: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-206-4768
Plate

152064768
C8311-00: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-15-155-2004
Special Bolt

151552004
J57151017-003: RNCC: 3 | RNVC: 2

4 Feb 2002

5340-15-110-9494
Cernieraspeciale

151109494
206-1006-29-5: RNCC: 3 | RNVC: 2

10 Sep 1990

5340-15-108-1111
Clamp

151081111
AA126748/1-12: RNCC: 3 | RNVC: 2

22 Sep 1989

5340-15-074-4327
Turnbuckle

150744327
2B10UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-122-6433
Tappo

151226433
30C098P006: RNCC: 3 | RNVC: 2

15 Oct 1998

5340-15-061-4547
Forcella Sagomata

150614547
L1002A17B8UNI2527: RNCC: 5 | RNVC: 2
L1002A17B8UNI2527: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-170-8541
Lastra Gomma Espans

151708541
58121-03/008: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-139-7550
Grillo

151397550
0007378: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-189-9693
Dadi E Bulloni

151899693
S9600: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-154-1432
Piastra

151541432
0-115053: RNCC: 3 | RNVC: 2
(241)A39630-115053: RNCC: 5 | RNVC: 2
1PA39630-115053: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-119-3172
Bride De Fixation

151193172
4607722: RNCC: 3 | RNVC: 2

11 Jul 1994

5340-15-139-2701
Lucchetto Mm.60

151392701
110 60: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-150-9465
Attacco

151509465
109-0371-26-104: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-15-186-5278
Clevis Brake

151865278
5Q50B1: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-001-9094
Piastrina Fissaggio

150019094
JM90S2-B5-1,5KW-380V50HZ/26: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-152-6418
Piastra

151526418
0-108876: RNCC: 3 | RNVC: 2
00108876: RNCC: 3 | RNVC: 2
(241)A39630-108876: RNCC: 5 | RNVC: 2

3 Oct 2000

5340-15-112-8423
Strozzatore

151128423
469611: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-103-6952
Dust And Moisture Seal Protective Cap-Plug

151036952
19519: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-202-2805
Fascetta Fissaggio

152022805
41231080: RNCC: 3 | RNVC: 2
(241)A424941231080: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-118-6137
Benne De Decapeuse

151186137
73127389: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-114-7310
Ghiera

151147310
D0491203: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-003-8707
Processing Handle

150038707
E0068019 01: RNCC: 3 | RNVC: 2

2 Dec 2013

5340-15-020-1947
Forcella

150201947
01-231N15: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-040-2884
Collarino

150402884
3-3667-101-29486: RNCC: 3 | RNVC: 2
3-3667-1-01-29486: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-065-8707
Supporto

150658707
P-943727-401: RNCC: 3 | RNVC: 2
P943727-401: RNCC: 5 | RNVC: 2

2 Sep 1985

5340-15-001-5485
Stand Base

150015485
182719581: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-074-4181
Turnbuckle

150744181
2A22UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-127-5488
Ghiera Blocaggio Te

151275488
883624: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-230-2476
Staffa

152302476
1P341910: RNCC: 3 | RNVC: 2
534015E123210: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-108-6331
Resilient Mount

151086331
93803299: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-147-5137
Assieme Pannello

151475137
44856-002: RNCC: 5 | RNVC: 2
44856-002: RNCC: 5 | RNVC: 9
44856-002: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-148-6200
Dust And Moisture Seal Protective Cap

151486200
V36262.00: RNCC: 3 | RNVC: 2

15 Sep 1998

5340-15-108-7171
Double Angle Bracket

151087171
60153724: RNCC: 3 | RNVC: 2

24 Feb 1989

5340-15-112-8547
Assiemes

151128547
468179: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-055-6900
Spessore Per Regist

150556900
529974: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-216-8260
Tassello In Acciaio

152168260
0408: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-056-5952
Staffa

150565952
13990: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-148-0011
Semicerniera

151480011
129-0640-45-102: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-040-1971
Gomma Per Riscontro

150401971
20429-401-27740: RNCC: 3 | RNVC: 2
64744-101: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-121-5480
Mensola Complessivo

151215480
129-0101-60-105: RNCC: 3 | RNVC: 2

16 Jan 1996

5340-15-109-3521
Bloccosilenziatore

151093521
OP-07.16: RNCC: 3 | RNVC: 2

16 Oct 1989

5340-15-193-7733
Key Blank

151937733
EURO LOCKS-EU19: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-15-009-2242
Helical Compression Spring Seat

150092242
895-363-480-4: RNCC: 3 | RNVC: 2
8953634804: RNCC: 5 | RNVC: 2
9932452: RNCC: 5 | RNVC: 2

22 Sep 1981

5340-15-054-0755
Spina Per Cerniera

150540755
260-18-19-9: RNCC: 3 | RNVC: 2
260-18-19-9: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-102-1629
Turnbuckle

151021629
8207.00.04: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-108-5473
Resilient Mount

151085473
42045058: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-207-1958
Golfari M12 (X3)

152071958
0097938: RNCC: 2 | RNVC: 2
(241)AG3500097938: RNCC: 5 | RNVC: 2

20 Sep 2012

5340-15-157-9142
Access Door

151579142
0-153386: RNCC: 3 | RNVC: 2
(241)A39630-153386: RNCC: 5 | RNVC: 2
1PA39630-153386: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-065-5990
Dispositivo Bloccag

150655990
212-1200-65-1: RNCC: 3 | RNVC: 2

27 Nov 1992

5340-15-114-7465
Insert

151147465
P-050565-001: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-154-3235
Co Access Door Assy

151543235
J52446003-401: RNCC: 3 | RNVC: 2

27 Apr 2001

5340-15-107-8308
Complessiv Maniglia

151078308
390-0115/01: RNCC: 3 | RNVC: 2

9 Jun 1989

5340-15-141-7458
Anodo

151417458
PL1162/30: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-065-3627
Clamp Link

150653627
C01-0018-104: RNCC: 3 | RNVC: 2

10 Jun 1985

5340-15-207-5785
Extension Handle

152075785
RSR84: RNCC: 3 | RNVC: 2
RSR84: RNCC: 5 | RNVC: 1
RSR84B: RNCC: 5 | RNVC: 2

31 Oct 2012

5340-15-074-4251
Turnbuckle

150744251
2D16UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-121-9196
Resilient Mount

151219196
93803961: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-120-7561
Ass

151207561
982150539: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-131-1055
Control Rod

151311055
994960: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-139-5790
Fermaglio

151395790
992463: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-066-0212
Cerniera

150660212
FM08: RNCC: 3 | RNVC: 2

28 Jan 1986

5340-15-040-2205
Distanziale

150402205
2-2407-105-26087: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-154-5540
Copriaccesso

151545540
J57158030-402: RNCC: 3 | RNVC: 2

12 Jul 2001

5340-15-105-8495
Double Angle Bracket

151058495
503-03-4964: RNCC: 5 | RNVC: 2
503-03-4964: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-206-5930
Utility Resilient Mount

152065930
Y23-PWHS06340ML: RNCC: 3 | RNVC: 2
(241)A4929Y23-PWHS06340ML: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-157-8527
Shock Mount Pad

151578527
0-105617: RNCC: 3 | RNVC: 2
(241)A39630-105617: RNCC: 5 | RNVC: 2
1PA39630-105617: RNCC: 5 | RNVC: 2

17 Nov 2003

5340-15-062-5594
Manetta Compl

150625594
109-0506-20-1: RNCC: 3 | RNVC: 2

29 Apr 1982

5340-15-179-4816
Nato Connector Moun

151794816
873-4012-244: RNCC: 3 | RNVC: 2
M0016979: RNCC: 5 | RNVC: 2

22 Jan 2007

5340-15-178-4932
Dust And Moisture Seal Protective Cap

151784932
308190-006: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-116-8534
Indice Per Asta Gra

151168534
D1402630: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-221-6968
Padlock

152216968
5340RI0991321: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-113-4819
Cernierasportello

151134819
113A6022-013: RNCC: 3 | RNVC: 2

29 Jun 1991

5340-15-105-4928
Cinghia Puntalino

151054928
2/25010-23.11.71-05: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-191-6318
Latch Assy

151916318
H-5010-091-218: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-064-7447
Electrical-Me Post

150647447
B8X20UNI6364-18NICRMO5-5331: RNCC: 2 | RNVC: 2
00582093: RNCC: 5 | RNVC: 2

8 Oct 1984

5340-15-209-3422
Serratura Doppia Ma

152093422
ART.6603/25: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-119-2511
Threaded End Tensioning Tie Rod

151192511
237A0042-001: RNCC: 3 | RNVC: 2

5 Jul 1994

5340-15-040-8307
Fascetta

150408307
7-4411-300-28385-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-202-2311
Rod

152022311
233A1003-013: RNCC: 3 | RNVC: 2
(241)A0019233A1003-013: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-15-176-9795
Toggle Type Fastene

151769795
69L4-1-3BA: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-041-2803
Asta

150412803
2-1109-101-33418-1: RNCC: 3 | RNVC: 2
2-1109-1-01-33418-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-120-6482
Cannotto Porta Guar

151206482
D0468964: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-103-4298
Gasket Bearing Flan

151034298
276660ART33: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-6048
Calotte

151186048
73133619: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-112-7655
Support

151127655
90408042024: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-163-1936
Rivet

151631936
15624511: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-133-2374
Fascetta

151332374
205-5-127-03: RNCC: 3 | RNVC: 2
205-5-127-03: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-041-8363
Fascetta

150418363
7-4411-100-43466-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-050-5631
Riscontro Gomma Gam

150505631
2-0343-7-01-27844-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-199-9284
Coperchio Del Soppo

151999284
04-06-2403-16-F: RNCC: 3 | RNVC: 2
(241)A098404-06-2403-16-F: RNCC: 5 | RNVC: 2

27 Jul 2005

5340-15-170-5638
Door Holder

151705638
839-4002-011: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-198-7793
Nonmetallic Bumper

151987793
377-046-005: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-153-8019
Dust Protective Cap

151538019
NOR497-28: RNCC: 3 | RNVC: 2
NOR497-28: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-120-9294
Semicerniera

151209294
113A6032-702: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-060-6087
Piastrina Guidacavo

150606087
62655-101A1: RNCC: 3 | RNVC: 2

16 Jun 1977

5340-15-204-1179
Utility Resilient Mount

152041179
MG-DNP-30: RNCC: 3 | RNVC: 2

7 Sep 2011

5340-15-122-3345
Chiavistello Seggio

151223345
263A1514-001: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-187-5657
Nut And Bolt Retainer

151875657
TAK-0055/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-108-0658
Thr Support

151080658
01TL23159: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-111-5842
Holder

151115842
23.78.56.01: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-166-4941
Moschettone In Acci

151664941
2197180: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-184-9591
Lucchetto Antiscass

151849591
115-70: RNCC: 3 | RNVC: 9

30 Dec 2008

5340-15-209-6264
Collari Per Palo

152096264
CP1X: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-3392
Trasportatore

151563392
(241)A3460CBD71245P01: RNCC: 3 | RNVC: 2
CBD71245P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-001-6585
Molla

150016585
174017016: RNCC: 3 | RNVC: 2
174017016: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-062-8047
Tirante Speciale

150628047
0-56171: RNCC: 3 | RNVC: 2
1PA39630-56171: RNCC: 5 | RNVC: 2

17 Sep 1982

5340-15-136-1704
Cerniera

151361704
26-1-95-02-01-06: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-200-4256
Set Di Chiodi

152004256
OMP-TEN-017: RNCC: 3 | RNVC: 2
(241)AE591OMP-TEN-017: RNCC: 5 | RNVC: 2

18 Jan 2006

5340-15-156-3623
Bearing Protection

151563623
(241)A3460CBD71212P01: RNCC: 3 | RNVC: 2
CBD71212P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-197-8169
Lifting Equipment

151978169
(241)A3460CBD70754G01: RNCC: 3 | RNVC: 2
CBD70754G01: RNCC: 3 | RNVC: 2

10 May 2004

5340-15-054-3208
Squadretta Attacco

150543208
526320: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-122-1529
Padlock

151221529
D0466969: RNCC: 3 | RNVC: 2
466969: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-045-2850
Fascetta

150452850
N0R2-505-01-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-110-2891
Bracket Fue

151102891
P120083-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-112-8157
Fondello

151128157
469541: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-144-9483
Staffa Assieme

151449483
196657A1: RNCC: 3 | RNVC: 2

17 Feb 1997

5340-15-213-8769
Cerniera Con Costa

152138769
CERNIERA100MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-155-4374
Dust And Moisture Seal Protective Cap

151554374
STUCCHI-TF-BIR38: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-149-0755
Speciale Tappo

151490755
2224-0012-001: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-15-151-5508
Innesto Rapido Mef

151515508
960806: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-15-127-5156
Guarnizione Piastri

151275156
871261: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-009-5836
Cover Plate Access

150095836
75238613: RNCC: 3 | RNVC: 2
9981256: RNCC: 5 | RNVC: 2
75238613: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-152-4051
Dust And Moisture Seal Boot

151524051
004679651: RNCC: 3 | RNVC: 2
00103504: RNCC: 4 | RNVC: 1
(241)A39630-103504: RNCC: 5 | RNVC: 2
(241)A396300103504: RNCC: 5 | RNVC: 2
0-103504: RNCC: 5 | RNVC: 2
004679651: RNCC: 5 | RNVC: 2
1PA39630-103504: RNCC: 5 | RNVC: 2

7 Sep 2000

5340-15-114-1323
Threaded End Tensioning Tie Rod

151141323
56-2122-012: RNCC: 3 | RNVC: 2

1 Jun 1993

5340-15-191-2060
Scala A 10 Gradini

151912060
MOD.F-5P: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-060-0288
Escutcheon Plate

150600288
1376-05-367: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-156-4822
Dust And Moisture Seal Protective Cap-Plug

151564822
0-121415: RNCC: 3 | RNVC: 2
(241)A39630-121415: RNCC: 5 | RNVC: 2
1PA39630-121415: RNCC: 5 | RNVC: 2

13 Feb 2003

5340-15-116-1162
Piastrina Di Blocca

151161162
DPR29494/1-18: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-074-4416
Turnbuckle

150744416
1B8UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-213-8687
Maniglia Per Porte

152138687
MANIGLIAC/FORO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-113-2529
Complessivo Staffa

151132529
375A4084-303: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-005-9988
Stantuffo Motore

150059988
20004-005-02: RNCC: 3 | RNVC: 2

11 Aug 1979

5340-15-101-7987
Maniglia Per Sporte

151017987
A6120-92013-21: RNCC: 3 | RNVC: 2

5 Oct 1987

5340-15-185-7939
Estrattore Per Viti

151857939
ESTRATTOREGR4: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-159-4732
Padlock

151594732
PN UAS 00000312: RNCC: 3 | RNVC: 2
5340F76023957: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-134-5049
Piastrina Pompa Oli

151345049
562530: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-109-5880
Supportoaccessoriom

151095880
20530510A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-166-5183
Sistema Di Aggancio

151665183
TP500080201C250201: RNCC: 1 | RNVC: 2
TP500080201C250201: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-207-1438
Sostegno Elastico

152071438
157602198: RNCC: 3 | RNVC: 2
(241)A0199157602198: RNCC: 5 | RNVC: 2

10 Sep 2012

5340-15-119-3467
Pressacavo Speciale

151193467
992114287P: RNCC: 3 | RNVC: 2

11 Feb 2000

5340-15-189-5224
Fascetta

151895224
802-0212: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-007-0264
Latch

150070264
P884036-402: RNCC: 3 | RNVC: 2

20 Nov 1979

5340-15-120-5499
Supporto Ad Angolo

151205499
109-3900-02-105: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-213-8408
Serratura Da Infila

152138408
43020-65-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-192-1140
Shockabsorber

151921140
16882/V: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-149-8268
Tank Door Handle

151498268
40136020: RNCC: 3 | RNVC: 2
40136020: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-155-4426
Fixed Clamp

151554426
CBD71047P02: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-119-5411
Disco Di Battuta Ac

151195411
D0484913: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-109-7278
Seat Pipe Support

151097278
773348: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-181-6103
Barra Luminosa Comp

151816103
001G0460: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-198-7860
Pipe Bracket

151987860
4800587: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-202-7899
Saldata Staffa

152027899
190512991: RNCC: 3 | RNVC: 2

11 Jul 2007

5340-15-045-3115
Control Rod

150453115
503-20-31: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-009-0915
Cover Plate Access

150090915
1141-38-113: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-049-4944
Gambo

150494944
7-8147-100-41493: RNCC: 3 | RNVC: 2
7-8147-1-00-41493: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-196-6304
Padlock

151966304
PN UAS 00049315: RNCC: 3 | RNVC: 2
5340F76039962: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-105-6366
Collare Serraggio

151056366
815840: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-003-9043
Resilient Mount Plate

150039043
182746109: RNCC: 3 | RNVC: 2
(241)A0199182746109: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-144-5020
Maniglia

151445020
0119473: RNCC: 3 | RNVC: 2
0119473: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-115-6077
Coperchio Scatola

151156077
D0468479: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-001-5502
Stand Base

150015502
182719589: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-109-1513
Staffa Metallica So

151091513
334004: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-15-066-4419
Resilient Mount

150664419
FR 88544: RNCC: 3 | RNVC: 2
91621022: RNCC: 5 | RNVC: 2
9988391: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-115-2289
Pin

151152289
518031350: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-179-2774
Lock Key

151792774
RU14: RNCC: 3 | RNVC: 2

10 Aug 2006

5340-15-154-7415
Serie Tubi Di Suppo

151547415
ZMD98XX-SYS023: RNCC: 3 | RNVC: 2

17 Sep 2001

5340-15-042-2655
Fascetta Apc

150422655
6127-15: RNCC: 3 | RNVC: 2

5 Apr 1972

5340-15-105-6049
Snap Hook

151056049
V.360-F.4: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-116-9642
O-Ring Stem

151169642
W019744: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-177-6301
Carter Leg 2

151776301
36367: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-154-1052
Tampone Ammortizzat

151541052
00150629: RNCC: 3 | RNVC: 2
0-150629: RNCC: 3 | RNVC: 2
1PA39630-150629: RNCC: 5 | RNVC: 2
(241)A39630-150629: RNCC: 5 | RNVC: 2

21 Mar 2001

5340-15-195-5472
Dust And Moisture Seal Protective Cap

151955472
0808085010: RNCC: 3 | RNVC: 2
0808085010: RNCC: 5 | RNVC: 2
CA0808085010: RNCC: 5 | RNVC: 2

4 Apr 2011

5340-15-185-3406
Rotolo Mm115x50-P24

151853406
103-4394: RNCC: 3 | RNVC: 2
1034394: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-147-3746
Clamp

151473746
375-51: RNCC: 3 | RNVC: 2
375-51: RNCC: 5 | RNVC: 9

31 Oct 1997

5340-15-127-6386
Staffa

151276386
721705: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-135-9517
Supporto Paraur

151359517
4410094: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-113-9938
Giunto Di Distribuz

151139938
D0473286: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-144-7428
Retainer Plate

151447428
211A7230-001: RNCC: 3 | RNVC: 2

2 Jan 1997

5340-15-058-7502
Scodellino Molla

150587502
90-6400-29: RNCC: 3 | RNVC: 2

3 May 1974

5340-15-209-0781
Fissaggi Universali

152090781
0304: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-193-3269
Saddle

151933269
26HJ04143051S01-523/001: RNCC: 3 | RNVC: 2
(241)A001926HJ04143051S01-523/00: RNCC: 5 | RNVC: 2

3 May 2010

5340-15-156-7588
Tappo Di Protezione

151567588
0-122107: RNCC: 3 | RNVC: 2
1PA39630-122107: RNCC: 5 | RNVC: 2

6 Mar 2003

5340-15-188-6446
Special Bracket

151886446
CBD71600P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71600P01: RNCC: 5 | RNVC: 2

20 Oct 2009

5340-15-101-7435
Pisra Forata

151017435
P6: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-115-8507
Plate Assy

151158507
244781G1: RNCC: 3 | RNVC: 2
71-73-001-001: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-206-0462
Bracket

152060462
4135T89G02: RNCC: 3 | RNVC: 2
(241)A34604135T89G02: RNCC: 5 | RNVC: 2

8 May 2012

5340-15-230-7799
Maniglia

152307799
RS 402 396: RNCC: 3 | RNVC: 2
534015E111960: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-181-0581
Engine Accessory Bracket

151810581
071679: RNCC: 3 | RNVC: 2
(241)A3593071679: RNCC: 5 | RNVC: 2

10 Oct 2008

5340-15-178-9348
Manual Control Lever

151789348
29210101001006: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-154-0865
Paracolpo Gomma

151540865
93811585: RNCC: 3 | RNVC: 2
(241)A424993811585: RNCC: 5 | RNVC: 2
1PA424993811585: RNCC: 8 | RNVC: 2

20 Mar 2001

5340-15-193-0221
Anello Di Centraggi

151930221
504032077: RNCC: 3 | RNVC: 2
(241)A4249504032077: RNCC: 5 | RNVC: 2

6 Apr 2010

5340-15-112-3463
Rubber Bumper

151123463
60154312: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-139-7543
Catenella Anello

151397543
0007330: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-231-8270
Tassello Gomma

152318270
8558110: RNCC: 3 | RNVC: 2
534015E063889: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-110-5520
Handwheel

151105520
VH153/44B6+IN: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-136-5155
Anello

151365155
S6135-61210: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-153-2516
Dust And Moisture Seal Protective Plug

151532516
122601356: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-237-7417
Tassello Spessore V

152377417
507.708.55: RNCC: 3 | RNVC: 2
534015E082739: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-108-8937
Control Rod

151088937
60127825: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-119-5218
Protective Plug

151195218
93156906: RNCC: 3 | RNVC: 2
93156906: RNCC: 5 | RNVC: 2

1 Sep 1994

5340-15-154-9267
Fermo In Gomma

151549267
68-702615-013: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-15-222-2125
Supporto

152222125
205-050-132-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-150-6089
Pressure G Bracket

151506089
722-232-490: RNCC: 3 | RNVC: 2

23 Feb 2000

5340-15-149-3070
Riparo Tubazioni Fi

151493070
4885719: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-149-3432
Coperchio Completo

151493432
60162842: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-15-150-1077
Barrette Haute

151501077
120015417: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-120-5943
Coppia Ruote Sterzo

151205943
00287: RNCC: 3 | RNVC: 2
(241)A488300287: RNCC: 5 | RNVC: 2

5 Jul 1995

5340-15-181-7803
Cilindro Da Infilar

151817803
830027277: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-142-4240
Fascetta

151424240
M9420: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-155-9307
Semiflangia

151559307
60181670: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-15-112-8387
Fondello

151128387
466849: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-156-2012
Base

151562012
(241)A3460CBD71169P01: RNCC: 3 | RNVC: 2
CBD71169P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-064-1383
Resilient Mount

150641383
79023688: RNCC: 3 | RNVC: 2

31 Mar 1982

5340-15-179-8060
Frame Handle

151798060
6-05-019: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-050-3603
Tornichetto

150503603
EF6-45B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-8465
Side E Hood

151208465
0920.003.1640: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-105-8946
Tirante A Teste Fil

151058946
9922712: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-121-6775
Lower Fixatio Clamp

151216775
102374-8: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-152-9119
Staffa (1) Accessor

151529119
310864F92: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-052-2332
Chiavistello

150522332
8-021-059: RNCC: 3 | RNVC: 2
8-021-059: RNCC: 5 | RNVC: 9
8-021-059: RNCC: 5 | RNVC: 9

15 Jun 1971

5340-15-142-7253
Anodo

151427253
AT1293 A.F.31: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-115-5347
Handwheel

151155347
D0471680: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-147-0897
Manual Control Handle

151470897
LBR45-110N16: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-149-0800
Supporto Sensore S2

151490800
20645-29-014: RNCC: 3 | RNVC: 2
20645-29-014: RNCC: 5 | RNVC: 9

23 Nov 1998

5340-15-111-6032
Mounting

151116032
A12172-01-20: RNCC: 3 | RNVC: 2
A12172-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-213-7316
Tappo Antitestura P

152137316
NEWE062: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-191-1054
Spinotto Tim

151911054
748451-1: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-206-7850
Bumper

152067850
4232089-00: RNCC: 3 | RNVC: 2

20 Jul 2012

5340-15-142-9324
Morsetto Serracavo

151429324
1-1-0362: RNCC: 3 | RNVC: 2

30 Oct 1996

5340-15-144-9255
Telaioguidabatteria

151449255
2-7-0452: RNCC: 3 | RNVC: 2

10 Feb 1997

5340-15-151-7402
Serratura E Manigli

151517402
A0007323: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-100-4134
Resilient Mount

151004134
81821/1: RNCC: 3 | RNVC: 2
23405: RNCC: 5 | RNVC: 2

27 Feb 1986

5340-15-230-2392
Supporto Elettroval

152302392
1P 609428: RNCC: 3 | RNVC: 2
534015E112525: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-115-7173
Supporto Rullo

151157173
D1401494: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-007-2641
Supporto Speciale

150072641
1368250: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-148-1663
Rear Support

151481663
1CPF86460: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-117-7311
Blocchetto Di Fermo

151177311
142513111: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-100-0916
Electrolytic Strap

5340-15-104-8923
Fissaggio Gaffetta

151048923
10420301: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-119-5414
Pattino Di Scorrime

151195414
D0487977: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-115-4379
Half Hinge

151154379
P-852715-003: RNCC: 3 | RNVC: 2
P852715-003: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-187-2726
Pattino Di Metallo

151872726
UG-150615040: RNCC: 3 | RNVC: 2
SCM-00.00.0066: RNCC: 3 | RNVC: 2
OMP-150615040: RNCC: 3 | RNVC: 2
(241)AD751UG-150615040: RNCC: 5 | RNVC: 2
(241)AE591OMP-150615040: RNCC: 5 | RNVC: 2
(241)AF051SCM-00.00.0066: RNCC: 5 | RNVC: 2

10 Mar 2009

5340-15-151-7881
Tirante

151517881
0-103496: RNCC: 3 | RNVC: 2
(241)A39630-103496: RNCC: 5 | RNVC: 2
1PA39630-103496: RNCC: 5 | RNVC: 2

10 Jul 2000

5340-15-209-0649
Lucchetto Per Serra

152090649
150-07: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-155-0051
Station Door Access

151550051
J52445002-401: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-15-061-4728
Supporto Angolare S

150614728
P-135233-001: RNCC: 3 | RNVC: 2
P135233-001: RNCC: 5 | RNVC: 2

26 Jan 1978

5340-15-219-6321
Pistola Nastratrice

152196321
PISTOLA-NASTRATRICE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-001-1455
Cooling And Protect

150011455
D1-55073-401: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-232-1131
Tappo

152321131
A.2497600: RNCC: 3 | RNVC: 2
534015E067449: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-063-3918
Rigid Surface Mechanical Patch

150633918
1.203.102: RNCC: 3 | RNVC: 2

7 Oct 1982

5340-15-207-0636
Sostegno Elastico

152070636
110166: RNCC: 3 | RNVC: 2
(241)A3593110166: RNCC: 5 | RNVC: 2

29 Aug 2012

5340-15-175-6653
Griff

151756653
XA81121: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-220-0495
Basket Forntale Dia

152200495
S1-57: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-050-5980
Ammortizzatore

150505980
C119-10-172-00: RNCC: 3 | RNVC: 2
C119-10-172-00: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-149-8424
Assieme Levetta A F

151498424
39A528-12-30: RNCC: 3 | RNVC: 2

8 Jun 1999

5340-15-045-1495
Control Rod

150451495
501-13-04: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-066-3249
Sleeve

150663249
AT19995-001: RNCC: 3 | RNVC: 2

23 May 1986

5340-15-178-7815
Manual Control Handle

151787815
037149: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-101-2614
Portapattini

151012614
INO-FOR 16.5: RNCC: 3 | RNVC: 2

16 Feb 1986

5340-15-007-9399
Resilient Mount

150079399
4329474: RNCC: 3 | RNVC: 2
4329474: RNCC: 5 | RNVC: 9

1 Mar 1980

5340-15-074-4236
Turnbuckle

150744236
1D8UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-121-6510
Anchor Strap

151216510
800049014: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-204-7563
Stand Base

152047563
109-0518-85-101: RNCC: 3 | RNVC: 2

22 Dec 2011

5340-15-151-4267
Staffa

151514267
0-112033: RNCC: 3 | RNVC: 2
00112033: RNCC: 3 | RNVC: 2
(241)A39630-112033: RNCC: 5 | RNVC: 2
1PA39630-112033: RNCC: 5 | RNVC: 2

24 May 2000

5340-15-193-0716
Tirante

151930716
CSS-150-3: RNCC: 3 | RNVC: 2
(241)AA003CSS-150-3: RNCC: 5 | RNVC: 2

12 Apr 2010

5340-15-059-4375
Control Rod

150594375
109-0020-03-7: RNCC: 3 | RNVC: 2

5 Jan 1976

5340-15-151-1151
Assieme Staffa Di F

151511151
381-0338/01: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-151-4364
Forcella

151514364
042102500: RNCC: 3 | RNVC: 2
042102500: RNCC: 4 | RNVC: 1
0-117128: RNCC: 5 | RNVC: 2
1PA39630-117128: RNCC: 5 | RNVC: 2
(241)A39630-117128: RNCC: 5 | RNVC: 2
(241)A396300117128: RNCC: 5 | RNVC: 2

24 May 2000

5340-15-137-4277
Molla

151374277
1048-97500: RNCC: 3 | RNVC: 2
1048-97500: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-061-0820
Coperchio Sagomato

150610820
P36CB33: RNCC: 5 | RNVC: 2
P36CB33: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-136-3321
Snodo Sferico

151363321
33B031P004: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-102-4489
Chiavistello Specia

151024489
263A1521-403: RNCC: 3 | RNVC: 2

30 Aug 1988

5340-15-213-4437
Serratura Corbin 45

152134437
PS302044500: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-112-1215
Electrical-Me Post

151121215
DE013.15.321: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-15-105-5496
Dado E Bullon Fermo

151055496
976472: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-5987
Staffa A Gomito

151055987
838104: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-213-8594
Serratura Da Infila

152138594
16215350: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-108-1379
Rubber Bumper

151081379
109-0041-16-1: RNCC: 3 | RNVC: 2

15 Jul 1987

5340-15-172-8145
Tassell0 Fisher Mo

151728145
TASSELL0 FISHER MODELLO PER QUA: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-197-6993
Protezione

151976993
530050: RNCC: 3 | RNVC: 2

20 Apr 2004

5340-15-235-6432
Fascette Metalliche

152356432
3507: RNCC: 3 | RNVC: 2
534015E077183: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-170-4417
Support

151704417
8274701: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-006-9577
Plastic Bumper

150069577
15647: RNCC: 3 | RNVC: 2

11 Jan 1979

5340-15-212-9728
Serratura Elettrica

152129728
YALE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-187-1461
Supporto Intermedio

151871461
1748-02-011 02: RNCC: 3 | RNVC: 2
14100004620: RNCC: 5 | RNVC: 2

19 Feb 2009

5340-15-065-2029
Padlock

150652029
193-0472/19: RNCC: 3 | RNVC: 2

7 Sep 1984

5340-15-006-4365
Serie Fascette Rite

150064365
204-6900-24-1: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-154-1017
Corrosion Preventive Anode

151541017
NAV-MM-001-A1-40X500: RNCC: 2 | RNVC: 2

21 Mar 2001

5340-15-134-4037
Staffa

151344037
38812911: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-059-7107
Electrical-Me Post

150597107
312-0190-01: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-194-0923
Paracolpo Gomma

151940923
556468106000: RNCC: 3 | RNVC: 2
(241)A1140556468106000: RNCC: 5 | RNVC: 2

30 Aug 2010

5340-15-147-8711
Disque

151478711
110644: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-157-9826
Hinge Half

151579826
J94345363-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-113-9671
Attaccocomplessivo

151139671
214A2024-003: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-217-2384
Spazzola In Acciaio

152172384
SPAZZOLACCIAIO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-232-9586
Tassello Con Gancio

152329586
0642: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-15-122-5541
Fork Centre

151225541
01TL21201-03: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-126-4970
Molla

151264970
TGTA57: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-147-5829
Security Ventil

151475829
98VA102: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-053-5971
Fascetta

150535971
45-3259-12: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-2603
Anchor Strap

151072603
2544-142: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-166-5201
Tassello In N Lon C

151665201
SB124: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-110-2058
Semicernieraspecial

151102058
109-0311-68-103: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-135-9378
Innesto Statica

151359378
IS: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-231-0607
Flangia Incernierat

152310607
16538AEP: RNCC: 3 | RNVC: 2
534015E118552: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-061-3813
Supporto Metallico

150613813
P26CB2: RNCC: 5 | RNVC: 2
P26CB2: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-118-0862
Control Rod

151180862
D0487580: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-002-3592
Dust And Moisture Seal Protective Cap

150023592
93813629: RNCC: 3 | RNVC: 2
0053721: RNCC: 5 | RNVC: 2
93813629: RNCC: 5 | RNVC: 2
93813629: RNCC: 5 | RNVC: 9
0053721: RNCC: 5 | RNVC: 9

16 Aug 2013

5340-15-074-4055
Turnbuckle

150744055
1B12UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-156-2129
Special Shaft

151562129
(241)A3460CBD71210P02: RNCC: 3 | RNVC: 2
CBD71210P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-055-6699
Staffa Sostegno

150556699
544223: RNCC: 3 | RNVC: 2

10 Apr 1972

5340-15-120-6466
Piastrina Antisvita

151206466
D0469631: RNCC: 3 | RNVC: 2

26 Jun 1996

5340-15-217-1366
Serratura

152171366
ART42311: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-045-3505
Fascetta Speciale

150453505
724-12-12: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-7546
Column

151207546
GB254-420-058: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-066-4271
Nut And Bolt Locking Plate

150664271
68-105640-009: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-15-201-5929
Pressure Bushing

152015929
A1 22/1 OT: RNCC: 3 | RNVC: 2

17 Oct 2006

5340-15-178-4603
Mounting Tray Mt-11

151784603
RAC-0813/01: RNCC: 3 | RNVC: 2
(241)A0069RAC-0813/01: RNCC: 5 | RNVC: 2
S434M10A1002: RNCC: 5 | RNVC: 2

31 May 2005

5340-15-148-3534
Double Angle Bracket

151483534
160326: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-154-4897
Headless Straight Rod

151544897
A0027666: RNCC: 3 | RNVC: 2

20 Jun 2001

5340-15-174-6445
Dirt And Liquid Deflector

151746445
CARP33464: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-162-1005
Elemento Rettilineo

151621005
30500: RNCC: 3 | RNVC: 2

8 Feb 2001

5340-15-147-5794
T-Fitting

151475794
98RS976: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-147-0899
Cuve

151470899
55090266: RNCC: 3 | RNVC: 2
F300 0T 023 1828: RNCC: 6 | RNVC: 9

21 Aug 1997

5340-15-135-9598
Supporto

151359598
212-070-109-1: RNCC: 3 | RNVC: 2

24 Sep 1998

5340-15-205-9436
Supporto A Sella Tu

152059436
00E68400: RNCC: 3 | RNVC: 2
(241)A010600E68400: RNCC: 5 | RNVC: 2

20 Apr 2012

5340-15-179-0001
Cover

151790001
RS 411 770 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-127-3096
Molla

151273096
726178: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-004-1545
Cover Plate Access

150041545
1375739: RNCC: 3 | RNVC: 2
1375739: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-134-6528
Cerniera

151346528
5887589: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-108-2842
Control Rod

151082842
478153: RNCC: 3 | RNVC: 2
D0478153: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-206-7031
Sostegno Elastico

152067031
137643134: RNCC: 3 | RNVC: 2
(241)A0199137643134: RNCC: 5 | RNVC: 2

4 Jul 2012

5340-15-127-4431
Anello

151274431
1740-16-079: RNCC: 3 | RNVC: 2
1740-16-079: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-157-4742
Cinghia

151574742
(241)S346520000-696: RNCC: 3 | RNVC: 2
2 0000-696: RNCC: 3 | RNVC: 2

7 Aug 2003

5340-15-152-3491
Tirante

151523491
00153416: RNCC: 3 | RNVC: 2
0-153416: RNCC: 3 | RNVC: 2
(241)A39630-153416: RNCC: 5 | RNVC: 2
(241)A396300153416: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-155-8876
Sostegno Elastico

151558876
DNP-60: RNCC: 3 | RNVC: 2
MG-DNP-60: RNCC: 3 | RNVC: 2
MG-DNP-60: RNCC: 5 | RNVC: 2
(241)A4997DNP-60: RNCC: 5 | RNVC: 2
(241)A4997MG-DNP-60: RNCC: 5 | RNVC: 2

13 Sep 2002

5340-15-155-8219
Dust And Moisture Seal Protective Plug

151558219
93931422: RNCC: 3 | RNVC: 2

10 Jul 2002

5340-15-118-9905
Nut And Bolt Locking Plate

151189905
75207990: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-001-1362
Manual Control Handle

150011362
23402: RNCC: 3 | RNVC: 2
I.301/80+X-M10: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-201-5346
Handle

152015346
1407-7450-200: RNCC: 3 | RNVC: 2

5 Oct 2006

5340-15-116-7491
Rotella Di Scorrime

151167491
30-08-147: RNCC: 3 | RNVC: 2

24 Jun 1993

5340-15-206-5774
Corrosion Preventive Anode

152065774
FX30: RNCC: 3 | RNVC: 2
(241)A3121FX30: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-180-1796
Cover Lock

151801796
187.07.003: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-179-9467
Key Blank

151799467
LAS-LS19: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-139-4527
Tirante

151394527
4732546: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-130-4874
Seal Assembli

151304874
SEL32: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-110-9307
Supportorigido

151109307
91145-101B01: RNCC: 3 | RNVC: 2
91145-101B1: RNCC: 5 | RNVC: 2

12 Sep 1990

5340-15-170-3722
Strap

151703722
206-061-901-45: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-119-7686
Synchro Clamp

151197686
TN4-0023-031-15: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-194-1883
Clip Adesiva Per Ca

151941883
404-455: RNCC: 3 | RNVC: 2
(241)AA136404-455: RNCC: 5 | RNVC: 2

30 Sep 2010

5340-15-108-8934
Control Rod

151088934
60124153: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-061-2685
Electrical-Me Post

150612685
000200198100: RNCC: 5 | RNVC: 2
1200096-131100003: RNCC: 5 | RNVC: 2
000200198100: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-105-1180
Serratura Da Addoss

151051180
4973700: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-4228
Turnbuckle

150744228
2C20UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-136-1196
Staffa Anteriore De

151361196
4451767: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-154-0779
Dashpot

151540779
2683954: RNCC: 3 | RNVC: 2
1PA29182683954: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-213-7512
Lucchetto In Ottone

152137512
ISEO60/800: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-3334
Removal Drift Assy

151563334
(241)A3460CBD71226G01: RNCC: 3 | RNVC: 2
CBD71226G01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-134-2775
Piastrina

151342775
4605218: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-101-3732
Distanziali

151013732
5168-3: RNCC: 3 | RNVC: 2

13 Jun 1994

5340-15-237-9684
Cover 3 Canali Juni

152379684
CP 50 J: RNCC: 3 | RNVC: 2
534015E141121: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-214-3145
Fascetta Cablaggio

152143145
MIL-LK2C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-102-1047
Metal Runner

151021047
193-0472/14: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-152-2628
Door Exchutlheon

151522628
AB47-831-104-1: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-215-0320
Fascetta Per Cablag

152150320
L6651/2-142: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-202-3565
Plug

152023565
DDEF2740-02: RNCC: 3 | RNVC: 2

28 Feb 2007

5340-15-154-1910
Tirante

151541910
0-110380: RNCC: 3 | RNVC: 2
1PA39630-110380: RNCC: 5 | RNVC: 2
(241)A39630-110380: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-170-6115
Manual Control Handle

151706115
FK0C90REP02: RNCC: 3 | RNVC: 2
CAE00258: RNCC: 5 | RNVC: 2

2 Apr 2003

5340-15-107-5057
Helical Compression Spring Seat

151075057
4734531: RNCC: 3 | RNVC: 2
(7001)2815151075057: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-180-2653
Corrosion Preventive Anode

151802653
(241)A070050EK0030: RNCC: 3 | RNVC: 2
50EK0030: RNCC: 3 | RNVC: 2

4 Apr 2008

5340-15-222-2432
Insert

152222432
LN29540A07: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-2785
Locking Support

151152785
518052630: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-122-1385
Block Retai

151221385
A-39115-001: RNCC: 3 | RNVC: 2
A39115-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-065-3200
Piastrina Di Arrest

150653200
P-892908-001: RNCC: 3 | RNVC: 2
P892908-001: RNCC: 5 | RNVC: 2

19 Feb 1985

5340-15-116-7584
Bracket Multiple

151167584
5-240002: RNCC: 3 | RNVC: 2

24 Jun 1993

5340-15-162-3660
Backflow Cooler

151623660
1Q 610333LA: RNCC: 3 | RNVC: 2
88068: RNCC: 5 | RNVC: 2
(241)A010688068: RNCC: 5 | RNVC: 2

6 Feb 2002

5340-15-123-6217
Grillo A U Diritt0

151236217
2233-7/8: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-119-5444
Sostegno E Supporto

151195444
1R 575444: RNCC: 3 | RNVC: 2
1R 575444: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-115-1838
Spring Clip

151151838
9-1240-005: RNCC: 3 | RNVC: 2
82-00553: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-151-9841
Staffa

151519841
00153468: RNCC: 3 | RNVC: 2
0-153468: RNCC: 3 | RNVC: 2
1PA39630-153468: RNCC: 5 | RNVC: 2
(241)A39630-153468: RNCC: 5 | RNVC: 2

31 Jul 2000

5340-15-122-3348
Tappo Speciale

151223348
200A0004-003: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-122-3809
Disco Metallico

151223809
D1405364: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-15-001-8033
Dust And Moisture Seal Protective Cap

150018033
500438472: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-154-9321
Protective Cover

151549321
CBD71022P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-232-6185
Fermo

152326185
00000097: RNCC: 3 | RNVC: 2
534015E093814: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-142-2378
Ammortizzatore

151422378
MM200AISI316: RNCC: 3 | RNVC: 2
(241)A3290MM200AISI316: RNCC: 5 | RNVC: 2

9 Jun 1997

5340-15-112-8227
Supportopera

151128227
466406: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-109-5873
Morsettoabloccosezi

151095873
21360017A: RNCC: 3 | RNVC: 2

20 Jul 1988

5340-15-074-4303
Turnbuckle

150744303
1B6UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-127-4248
Molla Sostegno Elas

151274248
845173: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-152-7900
Sostegno Elastico

151527900
P130901: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-194-2385
Cerniera (1) A Volo

151942385
5444401: RNCC: 3 | RNVC: 2
(241)AJ4895444401: RNCC: 5 | RNVC: 2

14 Oct 2010

5340-15-144-9259
Protezione Lato Pos

151449259
2-7-0420: RNCC: 3 | RNVC: 2

10 Feb 1997

5340-15-117-9997
Rubber Bumper

151179997
369-04220-107: RNCC: 3 | RNVC: 2

1 Mar 1994

5340-15-181-3872
Dust And Moisture Seal Protective Cover

151813872
1021301P01-01-01: RNCC: 3 | RNVC: 2

16 Dec 2008

5340-15-149-6193
Buffer

151496193
518-38-2240: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-157-8973
Staffa Speciale

151578973
008163014: RNCC: 3 | RNVC: 2
0-113999: RNCC: 4 | RNVC: 1
(241)A39630-113999: RNCC: 5 | RNVC: 2
1PA39630-113999: RNCC: 5 | RNVC: 2

20 Nov 2003

5340-15-144-9372
Collare Di Centragg

151449372
263A1876-001: RNCC: 3 | RNVC: 2

10 Feb 1997

5340-15-178-9963
Support

151789963
RS 407 325 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-193-6593
Quick Release Plunger

151936593
GN.38127: RNCC: 3 | RNVC: 2
163120186: RNCC: 3 | RNVC: 2
(241)A0199163120186: RNCC: 5 | RNVC: 2
(241)A0774GN.38127: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-068-9675
Cover Plate Access

150689675
K538-26-1090: RNCC: 3 | RNVC: 2

9 Jul 1986

5340-15-142-4943
Anodi Anticorrosion

151424943
A045407X03: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-110-2893
Bracket Fue

151102893
P120085-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-198-0870
Supporto

151980870
29041-002: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-15-118-2913
Cannotto In Nylon S

151182913
D1409874: RNCC: 3 | RNVC: 2

26 Apr 1995

Load More Results