What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 63 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 63 of 72

5340-15-020-4135
Fibbia Gancio Masch

150204135
C92X01-6: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-068-0883
Rubber Bumper

150680883
C-23507-1: RNCC: 3 | RNVC: 2
C-23507-1: RNCC: 3 | RNVC: 2

10 Oct 1981

5340-15-118-6733
Strap

151186733
CR002: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-107-5684
Handwheel

151075684
D208936: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-202-4550
Structual Angle

152024550
03153: RNCC: 3 | RNVC: 2
(241)A553603153: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-101-7836
Fascetta Speciale

151017836
SC32674.79D: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-135-7170
Coperchio

151357170
212-0950-05-55: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-113-6940
Stopblock Rh

151136940
390-0239/01: RNCC: 3 | RNVC: 2

6 Feb 1992

5340-15-206-7995
Utility Resilient Mount

152067995
H63-146-82-108-6FF: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-149-7701
Serie Anelli Per Am

151497701
RG-MM30-4: RNCC: 3 | RNVC: 2
(241)A3290RG-MM30-4: RNCC: 5 | RNVC: 2

21 Jun 1999

5340-15-155-0049
Connect Dorr Access

151550049
J52445001-401: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-15-181-4704
Latch Assy (Pre-Mod

151814704
263A1519-001: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-148-0616
Fermo Per Molla

151480616
232A4611-001: RNCC: 3 | RNVC: 2

16 Jun 1998

5340-15-141-8965
Squadretta

151418965
TM2-0270-010-11: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-053-1597
Turnbuckle

150531597
IA16UNI2018X15CN1808-4047: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-123-6216
Grillo Ad U Diritto

151236216
2233-9/16: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-007-0141
Collare A Supporto

150070141
61611-02A: RNCC: 3 | RNVC: 2

30 Jan 1980

5340-15-059-2635
Hinge

150592635
206-6109-10-9: RNCC: 3 | RNVC: 2

29 Oct 1975

5340-15-050-2244
Escutcheon Plate

150502244
2-1955-1-01-42217-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-105-8166
Sostegno Elastico

151058166
4120501: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-108-5051
Maniglia Con Chiave

151085051
MG5/C: RNCC: 3 | RNVC: 2

8 May 1989

5340-15-166-5017
Lh Hinge Half

151665017
113A6012751: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-219-9576
Carrucola In Ottone

152199576
CARRUCOLA40MM CON GANCIO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-112-0501
Dispositivo Di Supp

151120501
252A1153-402: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-139-3253
Tirante

151393253
1393640: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-115-8462
Hanger

151158462
71-02-005-010: RNCC: 3 | RNVC: 2
245483P1: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-068-1356
Metal Runner

150681356
27731-001D1: RNCC: 3 | RNVC: 2

26 Mar 1986

5340-15-110-1803
Helical Compression Spring Retainer

151101803
527920-01: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-157-9818
Hinge Assy

151579818
J94345351-401: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-158-5229
Profilato Speciale

151585229
251A1080-007: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-110-3731
Flansch

151103731
F304C3A-31: RNCC: 3 | RNVC: 2
F304C3A-31: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-203-1944
Bumper

152031944
12HJ04343435S01-433/18: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-156-2002
Base

151562002
(241)A3460CBD71143P01: RNCC: 3 | RNVC: 2
CBD71143P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-105-5967
Staffa A Gomito

151055967
1354710: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-178-5997
Tang

151785997
541-32-2070: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-108-1383
Turnbuckle Body

151081383
109-0110-58-3: RNCC: 3 | RNVC: 2

15 Jul 1987

5340-15-115-3097
Eqpt Rack Guides Se

151153097
100-0316/01: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-154-9338
Adaptor Plate Assy

151549338
CBD71089P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-122-2100
Cage Aiguille Axe

151222100
800031748: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-121-9973
Resilient Mount

151219973
4754064: RNCC: 3 | RNVC: 2
4154064: RNCC: 3 | RNVC: 2
(7001)5340151219973: RNCC: 5 | RNVC: 2
5340151219973: RNCC: 8 | RNVC: 2

10 Apr 1996

5340-15-193-9670
Utility Resilient Mount

151939670
D1402454: RNCC: 3 | RNVC: 2

10 Aug 2010

5340-15-206-0450
Dust And Moisture Seal Protective Cover

152060450
00014283: RNCC: 3 | RNVC: 2
00013764: RNCC: 3 | RNVC: 9

8 May 2012

5340-15-179-6784
Vehicular Seat Bracket

151796784
00191047: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-063-9112
Presa A Sfera

150639112
251 B: RNCC: 3 | RNVC: 2

7 Apr 1983

5340-15-101-2930
Strettoio Chiusura

151012930
677622-3/1: RNCC: 3 | RNVC: 2

28 Jul 1986

5340-15-206-5931
Utility Resilient Mount

152065931
Y23-PWHS08040L2: RNCC: 3 | RNVC: 2
(241)A4929Y23-PWHS08040L2: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-107-2659
Complessiv Angolare

151072659
A-1043014-103: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-125-3969
Clamp

151253969
A-1040902-103: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-050-6265
Attacco

150506265
AB47-706-26-31: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-111-3872
Tampone Ammortizzan

151113872
129-0101-04-115: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-060-7087
Cerniera Compl Ante

150607087
109-0310-46-2: RNCC: 3 | RNVC: 2

14 Dec 1976

5340-15-112-8350
Canotto

151128350
470495: RNCC: 3 | RNVC: 2
D0470495: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-4446
Resilient Mount

151184446
60148674: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-166-5170
Brush A Cover Ass

151665170
70811010: RNCC: 3 | RNVC: 2
70811010: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-001-2622
Wheel Directional L

150012622
7PS02000ASZ: RNCC: 3 | RNVC: 2

11 Jun 2013

5340-15-101-4134
Assieme Leva

151014134
1576-05-030: RNCC: 3 | RNVC: 2
157605030: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-117-4035
Piastra Supporto Ca

151174035
D1405549: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-159-9746
Rubber Bumper

151599746
122607482: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-121-4176
Dust And Moisture Seal Protective Cap

151214176
837941-10: RNCC: 3 | RNVC: 2
837941-10: RNCC: 5 | RNVC: 9

12 Dec 1995

5340-15-153-0646
Structual Angle

151530646
212-1100-93-33: RNCC: 3 | RNVC: 2

17 Nov 2000

5340-15-054-4230
Staffa Fissaggio

150544230
709208AT2I222: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-152-3559
Piastra

151523559
0-174113: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-15-147-5833
Security Ventil

151475833
98VA212: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-171-9665
Kit Connettori E Ad

151719665
KIT CONNETTORI E ADATTATORI ELET: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-101-0037
Vent Plug

151010037
15903: RNCC: 3 | RNVC: 2

5 Jun 1987

5340-15-106-3280
Staffa

151063280
4098095: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-121-6349
Tampon Selle

151216349
800037358: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-121-6342
Centreur Couronne

151216342
800036834: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-185-1217
Fascetta Speciale

151851217
102309: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-164-8096
Assieme Asta

151648096
263A1874-401: RNCC: 3 | RNVC: 2
(241)A2142263A1874-401: RNCC: 5 | RNVC: 2
263A1874401: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-180-7230
Reinforcement Plate

151807230
212-1125-22-105: RNCC: 3 | RNVC: 2
(241)A0126212-1125-22-105: RNCC: 5 | RNVC: 2

9 Jul 2008

5340-15-181-7241
Rullo-Zincato

151817241
RULLO-ZINCATO: RNCC: 3 | RNVC: 2
RULLOZINCATO: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-122-5690
Capacitor Support

151225690
46424-001: RNCC: 5 | RNVC: 2
46424-001: RNCC: 5 | RNVC: 9
46424-001: RNCC: 5 | RNVC: 9

3 Sep 1996

5340-15-111-6000
Holder

151116000
A03965-01-20: RNCC: 3 | RNVC: 2
A03965-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-102-7100
Dust And Moisture Seal Protective Plug

151027100
612-3": RNCC: 3 | RNVC: 2
182716: RNCC: 5 | RNVC: 2

10 Aug 1987

5340-15-110-2883
Bracket Fue

151102883
P125882-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-115-8472
Angle Front

151158472
277077P1: RNCC: 3 | RNVC: 2
71-01-001-086: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-120-5077
Handle

151205077
P-883500-801/802-12C001-504: RNCC: 3 | RNVC: 2
P883500-801/802-12C001-504: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-15-063-4942
Cover Plate Access

150634942
752948-12: RNCC: 3 | RNVC: 2
9986727: RNCC: 5 | RNVC: 2
75294812: RNCC: 5 | RNVC: 2
752948-12: RNCC: 5 | RNVC: 9
75294812: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-101-3003
Hinge Half

151013003
P-135198-001: RNCC: 3 | RNVC: 2
P135198-001: RNCC: 5 | RNVC: 2

30 Jan 1988

5340-15-104-4341
Testa Tira Forcella

151044341
2.3510.003.1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-193-1522
Piastra Di Montaggi

151931522
504138883: RNCC: 3 | RNVC: 2
(241)A4249504138883: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-191-8686
Avvolgicavo Da Mt50

151918686
380V: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-187-8972
Safety Plate

151878972
00608R0410: RNCC: 3 | RNVC: 2
60841: RNCC: 3 | RNVC: 2

20 May 2009

5340-15-146-7119
Handle Grip

5340-15-006-7842
Mount

150067842
122936-1: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-141-6820
Cilindro Da Infilar

151416820
8200L42C21D21-3: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-149-3428
Dust And Moisture Seal Protective Plug

151493428
60162838: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-15-205-5491
Dust And Moisture Seal Protective Cap-Plug

152055491
182702134: RNCC: 3 | RNVC: 2
(241)A0199182702134: RNCC: 5 | RNVC: 2

19 Mar 2012

5340-15-151-6942
Mensola

151516942
0-102173: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-151-7094
Staffa

151517094
0-179052: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-117-8275
Jonc

151178275
ORO 1: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-15-194-1823
Angle Bracket

151941823
240F509-4700-01: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-15-041-0603
Calzatura Esterna

150410603
2-3215-100-25838-1: RNCC: 3 | RNVC: 2
2-3215-1-00-25838-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-119-7306
Attacco Completo

151197306
212-1300-26-1: RNCC: 3 | RNVC: 2

12 May 1995

5340-15-222-2667
Dust Connector

152222667
MD-007-6-00000-12-90: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-113-5710
Speciale Attacco

151135710
62879-101: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-104-8890
Fissaggio Gaffetta

151048890
3748271: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-127-3756
Molla

151273756
1315-55-402-2: RNCC: 3 | RNVC: 2
1315-55-402-2: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-176-7485
Bracket (Post-Mod.

151767485
311A2240-025: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-058-4061
Dust And Moisture Seal Protective Cap-Plug

150584061
553808121000: RNCC: 2 | RNVC: 3
538-08-1210: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-180-6467
Tampone Ammortizzat

151806467
E78-LD308: RNCC: 3 | RNVC: 2
(241)SCT56E78-LD308: RNCC: 5 | RNVC: 2
E78-LD308: RNCC: 5 | RNVC: 2

1 Jul 2008

5340-15-134-1380
Fascetta

151341380
KB751-12-34: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-137-8770
Cappellotto

151378770
1837-13: RNCC: 3 | RNVC: 2
1837-13: RNCC: 5 | RNVC: 9

10 Oct 1996

5340-15-052-9111
Tappo

150529111
204-4610-3-1: RNCC: 3 | RNVC: 2
204-4610-03-1: RNCC: 5 | RNVC: 2

31 Dec 1979

5340-15-218-2114
Custodia In Pelle P

152182114
PMLN4421: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-208-9195
Mount Resilient

152089195
200-2384-050: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-107-1860
Plate Grey

151071860
C7259-W10-C2: RNCC: 3 | RNVC: 2
C7259W10C2: RNCC: 3 | RNVC: 2
C7259-W10-C2: RNCC: 5 | RNVC: 2
C7259-W10-C2: RNCC: 5 | RNVC: 9

10 Apr 1989

5340-15-213-1704
Fascetta Autoblocca

152131704
FS550DWC: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-108-4159
Control Rod

151084159
4731276: RNCC: 3 | RNVC: 2

5 Jan 1989

5340-15-118-0507
Supporto Rubinetto

151180507
D0488914: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-175-5091
Golfare Maschio M14

151755091
L222/1-M14: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-186-3763
Kit 3 Anelli Blocca

151863763
FIR-GC30901: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-062-2699
Resilient Mount

150622699
749834 C: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-020-1818
Nut And Bolt Locking Plate

150201818
01-231H119: RNCC: 3 | RNVC: 2
55.25.039.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-237-1170
Supporto Fisso Per

152371170
ST-1: RNCC: 3 | RNVC: 2
534015E062870: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-135-8444
Staffa Cassetta Med

151358444
412-9000-44-103: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-040-9253
Perno

150409253
2-5331-1-10-24199-6: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-110-6345
Angle

151106345
P-050563-001: RNCC: 3 | RNVC: 2
P050563-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-005-0447
Dust And Moisture Seal Protective Cap

150050447
08366: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-114-1331
Corrosion Preventive Anode

151141331
04-0186-080: RNCC: 3 | RNVC: 2
04.0186.080: RNCC: 3 | RNVC: 2

2 Jun 1993

5340-15-178-5327
Control Rod

151785327
R165-07: RNCC: 3 | RNVC: 2
R165-07: RNCC: 5 | RNVC: 9

1 Jul 2005

5340-15-175-5086
Gancio Orientabile

151755086
552V-40: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-058-6131
Rubber Bumper

150586131
503-10-0344C: RNCC: 5 | RNVC: 2
503-10-0344C: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-009-2162
Molla A Lamina

150092162
212-5210-09-3: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-174-7450
Lamiera 2.00X5 Crni

151747450
51460-01/014: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-187-6072
Manual Control Handle

151876072
2356040140: RNCC: 3 | RNVC: 2

14 Apr 2009

5340-15-187-6364
Multiple Angle Bracket

151876364
98176873: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-150-5889
Access Door

151505889
A37829-01-08: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-234-3439
Cerniera Con Perno

152343439
15-45-060/05: RNCC: 3 | RNVC: 2
534015E074549: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-151-7312
Headless Straight Rod

151517312
0-179834: RNCC: 3 | RNVC: 2

4 Jul 2000

5340-15-009-1970
Helical Compression Spring Seat

150091970
766299: RNCC: 3 | RNVC: 2
0-49013: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-110-8321
Access Door Locking Ring

151108321
26-6-92-06B: RNCC: 3 | RNVC: 2

14 Jun 1990

5340-15-061-8918
Electronic Equipment Hardware Kit

150618918
XXI-151: RNCC: 3 | RNVC: 2

5 May 1984

5340-15-108-4755
Stirrup

151084755
C7188-W11-B1: RNCC: 3 | RNVC: 2
C7188-W11-B1: RNCC: 5 | RNVC: 2
C7188-W11-B1: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-15-009-8872
Door Access Ballist

150098872
1236-22-113: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-158-5227
Loop Clamp Kit

151585227
263A1628-003: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-107-1712
Plastic Bumper

151071712
RS411526A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-007-7588
Asta Speciale

150077588
0-31660: RNCC: 3 | RNVC: 2

23 Apr 1980

5340-15-181-1180
Mechanic Equipment Hardware Kit

151811180
2 049 034: RNCC: 3 | RNVC: 2
(241)A37652049034: RNCC: 5 | RNVC: 2

29 Oct 2008

5340-15-142-9456
Supporto Elastico

151429456
98.3.10803/B: RNCC: 3 | RNVC: 2
575440: RNCC: 3 | RNVC: 2
575440: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-062-7004
Rim Clen Clamp (1)

150627004
4763796: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-115-7133
Flangiatubomisurasu

151157133
D0472453: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-074-3678
Turnbuckle

150743678
2C10UNI20210T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-120-6818
Guida Sede Per Vite

151206818
D0487183: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-112-7911
Resilient Mount

151127911
7002-PA: RNCC: 3 | RNVC: 2
7002-PA: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-156-2135
Support

151562135
(241)A3460CBD70761P17: RNCC: 3 | RNVC: 2
CBD70761P17: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-005-4991
Retainer 1C-130J-4-

150054991
23035734: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-120-3310
Dust And Moisture Seal Protective Plug

151203310
834707-10: RNCC: 3 | RNVC: 2
8196792: RNCC: 5 | RNVC: 2
834707-10: RNCC: 5 | RNVC: 9

30 Mar 1995

5340-15-157-2518
Corrosion Preventive Anode

151572518
ZINCO TIPO B1(150X50X40): RNCC: 3 | RNVC: 2
STI7-306 B1(150X80X40): RNCC: 3 | RNVC: 2
(241)A0400STI7-306B1(150X80X40): RNCC: 5 | RNVC: 2

11 Jun 2003

5340-15-045-3328
Control Rod

150453328
590-12-56: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-157-9123
Piastra Speciale

151579123
0-155627: RNCC: 3 | RNVC: 2
(241)A39630-155627: RNCC: 5 | RNVC: 2
1PA39630-155627: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-219-9112
Ancoretta Per Soffi

152199112
HDR6560030: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-001-4813
Molla

150014813
25027: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-4447
Coperchio

151094447
1P 548104: RNCC: 3 | RNVC: 2
1P 548104: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-109-8901
Puntale Di Arresto

151098901
467804: RNCC: 3 | RNVC: 2
D0467804: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-123-6676
Supporto In Durall

151236676
2GMVDIS2-92: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-124-3132
Maniglia

151243132
CT0040-026: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-049-7463
Blocchetto Gomma

150497463
AB682-107-8: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-106-3191
Chiavistello

151063191
5086-03-37: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-151-5399
Piastra

151515399
0-119146: RNCC: 3 | RNVC: 2
(241)A39630-119146: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-063-8720
Luggage Bumper

150638720
1127/103: RNCC: 3 | RNVC: 2
77901388: RNCC: 5 | RNVC: 2

31 Mar 1982

5340-15-176-3945
Tassello In Nylon C

151763945
SB12/5: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-112-4253
Plate

151124253
122TE2006-1: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-068-4922
Cover Plate Access

150684922
2918-9: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-116-9755
Internal

151169755
W018265: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-187-7350
Clamp Assem Bracket

151877350
J28042175-403: RNCC: 3 | RNVC: 2
(241)A0019J28042175-403: RNCC: 5 | RNVC: 2

5 May 2009

5340-15-121-5672
Engine Accessory Bracket

151215672
1S 554187: RNCC: 3 | RNVC: 2
1S 554187: RNCC: 5 | RNVC: 9

13 Sep 1996

5340-15-185-5593
Serratura 4 Mandate

151855593
64597: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-118-1176
Threaded End Tensioning Tie Rod

151181176
1421522456: RNCC: 3 | RNVC: 2
1421522456: RNCC: 5 | RNVC: 9

22 Mar 1996

5340-15-180-5587
Piastra Di Montaggi

151805587
504135572: RNCC: 3 | RNVC: 2
(241)A4249504135572: RNCC: 5 | RNVC: 2

18 Jun 2008

5340-15-102-2183
Perno Speciale

151022183
109-0700-59-3: RNCC: 3 | RNVC: 2

16 Dec 1986

5340-15-119-6951
Resilient Mount

151196951
03-27146-27146: RNCC: 3 | RNVC: 2
009060048: RNCC: 5 | RNVC: 2

3 Nov 1994

5340-15-008-1371
Semiblocchetto Rite

150081371
A1-45103-003: RNCC: 3 | RNVC: 2
A1-45103-003: RNCC: 5 | RNVC: 9

22 Apr 1981

5340-15-107-8882
Coperchio Accesso

151078882
01-02-344-12: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-065-1356
Handle

150651356
P-852594-001: RNCC: 3 | RNVC: 2
P852594-001: RNCC: 5 | RNVC: 2

15 Feb 1985

5340-15-122-6080
Tappo Per Supporto

151226080
23032-022-80902: RNCC: 3 | RNVC: 2

27 Sep 1996

5340-15-152-3815
Collare

151523815
00108900: RNCC: 3 | RNVC: 2
0-108900: RNCC: 3 | RNVC: 2
(241)A39630-108900: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-064-5211
Support

150645211
6-465-135: RNCC: 3 | RNVC: 2

30 Jul 1984

5340-15-181-8270
Mensola In Acciaio

151818270
SC1510: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-112-0474
Dispositivo Di Supp

151120474
252A1330-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-112-0444
Dispositivo Di Supp

151120444
265A1061-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-125-1062
Lucchetto Da Mm60(2

151251062
103: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-113-0544
Resilient Mount

151130544
FG138-36-07: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-066-3199
Rotella Rigida

150663199
01TC21247: RNCC: 3 | RNVC: 2

23 May 1986

5340-15-060-1813
Dispositivo Di Bloc

150601813
17355-1: RNCC: 3 | RNVC: 2

4 Dec 1976

5340-15-174-6562
Drive End Bracket M

151746562
6102312112: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-151-0032
Flangia

151510032
42118993: RNCC: 3 | RNVC: 2
0-119821: RNCC: 5 | RNVC: 2
42118993: RNCC: 5 | RNVC: 2

22 Feb 2000

5340-15-162-2867
Chiusura Speciale

151622867
GB061-720-000: RNCC: 3 | RNVC: 2

25 Jun 2001

5340-15-151-5410
Tampone

151515410
0-152133: RNCC: 3 | RNVC: 2
00152133: RNCC: 3 | RNVC: 2
1PA39630-152133: RNCC: 5 | RNVC: 2
(241)A39630-152133: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-151-9620
Piastra

151519620
0-173542: RNCC: 3 | RNVC: 2
00173542: RNCC: 3 | RNVC: 2
(241)A39630-173542: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-15-111-5969
Holder

151115969
A12180-01-20: RNCC: 3 | RNVC: 2
A12180-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-148-1894
Access Door

151481894
555958014000: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-122-5576
Rear Cover

151225576
01TL21028-03: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-150-3244
Resilient Mount

151503244
1R 609629LA: RNCC: 3 | RNVC: 2
VZA-D-AV 500-5.8: RNCC: 5 | RNVC: 2

29 Sep 1999

5340-15-158-3480
Co Tappo Con Anodo

151583480
18.405.00-02/TAB.114: RNCC: 3 | RNVC: 2

22 Jan 2004

5340-15-156-4861
Lama Tagliafili Com

151564861
504053352: RNCC: 3 | RNVC: 2

13 Feb 2003

5340-15-115-7043
Coperchietto

151157043
D0468380: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-112-7550
Cop Rubber

151127550
2145014: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-149-4539
Spacing Threaded Standoff

151494539
1086.004-02: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-15-150-6990
Lath Assembly

151506990
H168-1DN0902S: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-205-7534
Edge Bracket

152057534
109-0010-87-111: RNCC: 3 | RNVC: 2

30 Mar 2012

5340-15-116-1075
Manual Control Lever

151161075
DPR24130/2-26-61: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-065-7249
Piastrina Supporto

150657249
109-0510-15-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-062-6973
Cover

150626973
1/279646: RNCC: 3 | RNVC: 2
1279646: RNCC: 5 | RNVC: 2
9986759: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-220-0501
Porta Ass 1000 Wx21

152200501
S1-13B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-178-9913
Plate

151789913
RS 403 680: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-103-1534
Sfera

151031534
L8245005: RNCC: 3 | RNVC: 2
DE160.03.315: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-103-5077
Nut And Bolt Retainer

151035077
808-76113-1: RNCC: 3 | RNVC: 2

9 Apr 1988

5340-15-065-6642
Escutcheon Plate

150656642
109-0362-13-1: RNCC: 3 | RNVC: 2

14 Dec 1984

5340-15-141-2295
Kit Fissaggio Conte

151412295
GS/19/PM: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-101-7442
Piastra Non Forata

151017442
450X250X20DIS44125: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-064-5526
Bracket

150645526
188622P1: RNCC: 3 | RNVC: 2

30 Jul 1984

5340-15-204-0535
Door Handle Unit

152040535
D0608512: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-15-195-9149
Paracolpo Gomma

151959149
J04841666-001: RNCC: 3 | RNVC: 2
(241)A0019J04841666-001: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-112-1357
Schermo

151121357
DE013.16.401: RNCC: 3 | RNVC: 2
(241)A5015DE013.16.401: RNCC: 5 | RNVC: 2

12 Feb 1991

5340-15-109-8998
Rollo

151098998
468873: RNCC: 3 | RNVC: 2
D0468873: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-102-6295
Luggage Bumper

151026295
23592: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-15-213-5337
Lucchetto Ottone Mm

152135337
PL18030.00: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-1688
Resilient Mount

151561688
60171539: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-105-6374
Collare Serraggio

151056374
001.0420.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-148-6657
Stand Base (1)

151486657
190540174: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-178-8588
Door Motor

151788588
SUPER 2200: RNCC: 3 | RNVC: 2

15 Dec 2005

5340-15-213-8823
Comando Esterno Uni

152138823
07077-18: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-191-1340
Manicotto

151911340
0822-105-03116: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-200-9363
Resilient Mount

152009363
771-0989/01: RNCC: 3 | RNVC: 2
(241)A0069771-0989/01: RNCC: 5 | RNVC: 2

18 Apr 2006

5340-15-213-8265
Maniglietta Est.In

152138265
61-309-ZA01: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-113-6057
Cover M Pin

151136057
AC120565-1/3-23: RNCC: 3 | RNVC: 2

20 Jan 1992

5340-15-207-0992
Turnbuckle

152070992
T.AISI304 -10 MM: RNCC: 3 | RNVC: 2
(241)AB561T.AISI304-10MM: RNCC: 5 | RNVC: 2

3 Sep 2012

5340-15-003-8977
Stand Base

150038977
182741108: RNCC: 3 | RNVC: 2
(241)A0199182741108: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-106-0675
Scodellino Molla

151060675
8521269: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-106-0076
Piastra Bloccaggio

151060076
354236: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-169-7222
Padlock

151697222
F72018178: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-105-5963
Staffa A Gomito

151055963
002.2762.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-4361
Turnbuckle

150744361
1C56UNI2020ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-157-3583
Specia Cover Guard

151573583
02731A202090: RNCC: 2 | RNVC: 3

4 Jul 2003

5340-15-166-5021
Lh Hinge

151665021
113A6022753: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-156-2146
Lef Lateral Support

151562146
(241)A3460CBD71163P06: RNCC: 3 | RNVC: 2
CBD71163P06: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-135-9483
Custodie Ammort

151359483
52018: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-063-0656
Cover Plate Access

150630656
4467478: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-118-6540
Tb Silic Rub

151186540
SM96-004-1: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-114-7234
Helical Compression Spring Seat

151147234
06-618-B-54: RNCC: 1 | RNVC: 3
(7001)5340151147234: RNCC: 3 | RNVC: 2
54830: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-15-121-0922
Corrosion Preventive Anode

151210922
2C-AN/RIV/1510/0: RNCC: 3 | RNVC: 2
A1-PN10-PT: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-15-136-9407
Squadretta

151369407
47-267-422-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-005-2228
Clamp

150052228
649-411-594-0: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-120-2147
Blocchetto Serratur

151202147
10350000087/LRT: RNCC: 3 | RNVC: 2
10350000087: RNCC: 5 | RNVC: 2
10350000087: RNCC: 5 | RNVC: 9

23 Feb 1995

5340-15-143-6209
Anello

151436209
2200-24883: RNCC: 3 | RNVC: 2
2200-24-883: RNCC: 3 | RNVC: 2
2200-24883: RNCC: 5 | RNVC: 9
2200-24-883: RNCC: 5 | RNVC: 9

11 Dec 1996

5340-15-120-4752
Resilient Mount

151204752
1Q 541226LB: RNCC: 3 | RNVC: 2
1Q 541226LB: RNCC: 5 | RNVC: 9

5 Nov 1996

5340-15-106-4816
Chiaviste Catenella

151064816
5086-03-31: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-122-3303
Punto Di Cerniera

151223303
215A1003-003: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-006-5735
Morsetto Speciale

150065735
000201217100: RNCC: 5 | RNVC: 2
000201217100: RNCC: 5 | RNVC: 9

29 Oct 1979

5340-15-156-3832
Plugging Plate

151563832
(241)A3460CBD71338P01: RNCC: 3 | RNVC: 2
CBD71338P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-207-7431
Support Bracket

152077431
4133T00G01: RNCC: 3 | RNVC: 2
(241)A34604133T00G01: RNCC: 5 | RNVC: 2

15 Nov 2012

5340-15-120-5151
Lever

151205151
P-175502-401/402-14E001-205/2: RNCC: 3 | RNVC: 2
P175502-401/402-14E001-205/2: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-15-170-5449
Dust And Moisture Seal Protective Plug

151705449
1625/7-TAP: RNCC: 2 | RNVC: 2
CC010: RNCC: 3 | RNVC: 2

18 Mar 2003

5340-15-060-4769
Access Cover Plate

150604769
1276-19-184: RNCC: 3 | RNVC: 2
127619184: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-113-2537
Compless Protezione

151132537
377A1545-001: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-189-6586
Accessori Vari

151896586
ACCESSORIVARI: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-040-2531
Cerniera

150402531
2-5707-101-22162-4: RNCC: 3 | RNVC: 2
2-5707-1-01-22162-4: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-137-2562
Distanziale

151372562
4S6-4-0142: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-170-3499
Cylinder And Suppor

151703499
206-001-739-5: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-009-4865
Snap Hook

150094865
RT75-10-2: RNCC: 3 | RNVC: 2

4 Nov 1980

5340-15-176-7898
Serratura Yale

151767898
2620/70: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-004-2843
Dispositivo Di Bloc

150042843
17034-19: RNCC: 3 | RNVC: 2

13 Sep 1977

5340-15-155-4847
Shaft Support Assy

151554847
CBD71185G01: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-205-1993
Paracolpo Gomma

152051993
WMP053000682V04: RNCC: 3 | RNVC: 2
(241)A2309WMP053000682V04: RNCC: 5 | RNVC: 2

24 Feb 2012

5340-15-174-7550
035 5 2Cu 0 Fr4 0

151747550
58572-05/136: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-220-9583
Bracket Switch

152209583
5Q165C-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-061-2342
Rim Clen Clamp (1)

150612342
1200096-159000010: RNCC: 5 | RNVC: 2
000200148900: RNCC: 5 | RNVC: 2
000200148900: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-065-6216
Tie Rod Tensioning

150656216
6399012B3REP9: RNCC: 3 | RNVC: 2

4 Oct 1984

5340-15-166-4861
Molla

151664861
75527004: RNCC: 3 | RNVC: 2
75527004: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-112-8346
Sedeo

151128346
470463: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-120-6844
Supporto Sinistro M

151206844
D0486598: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-152-3498
Double Angle Bracket

151523498
0-156581: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-15-062-5081
Arresto A Piastrina

150625081
P894816-003: RNCC: 3 | RNVC: 2

18 Jan 1982

5340-15-175-4574
Filetti Heli-Coil M

151754574
HELI-COIL5X0-8MM: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-199-8886
Coperchio Tenuta Me

151998886
06-02-747-6-G: RNCC: 3 | RNVC: 2
(241)A098406-02-747-6-G: RNCC: 5 | RNVC: 2

26 Jun 2005

5340-15-100-1073
Chiavistello

151001073
P-882577-405: RNCC: 3 | RNVC: 2
P882577-405: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-15-170-8579
Lastra 564X376x0.6

151708579
58311-11/118: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-061-8907
Blocchetto

150618907
A1-23418-003: RNCC: 3 | RNVC: 2

7 Sep 1984

5340-15-122-1397
Strip Retai

151221397
A-39519-001: RNCC: 3 | RNVC: 2
A39519-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-007-2651
Supporto

150072651
1374226: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-063-4827
Resilient Mount

150634827
60102855: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-103-4264
Ring

151034264
276983ART38: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-055-6261
Arresto Di Sicurezz

150556261
750453: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-179-0048
Bracket Assembly

151790048
RS 414 243 AE: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-156-2014
Base

151562014
(241)A3460CBD71134P01: RNCC: 3 | RNVC: 2
CBD71134P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-185-7147
Confezione Fischer

151857147
00261: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-118-0412
Boccola Portaguarni

151180412
D0484627: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-126-4969
Molla

151264969
TGTA49: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-116-0239
Dust And Moisture Seal Protective Cap

151160239
04.2579.018: RNCC: 3 | RNVC: 2

16 Sep 1993

5340-15-139-9274
Supporto Elastico

151399274
I266RA: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-121-7189
Utility Resilient Mount

151217189
VZA/R/AV2000/5,8: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-111-5987
Holder

151115987
A08970-01-20: RNCC: 3 | RNVC: 2
A08970-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-064-6862
Hinge

150646862
P-175606-002: RNCC: 3 | RNVC: 2
P175606-002: RNCC: 5 | RNVC: 2

10 Jun 1984

5340-15-112-8222
Tassellom

151128222
466376: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-001-5803
Bumper

150015803
42566642: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-179-0033
Plate

151790033
RS 413 774 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-007-3415
Tappo Speciale

150073415
0-28497: RNCC: 3 | RNVC: 2
10C95: RNCC: 3 | RNVC: 2
(241)A39630-28497: RNCC: 5 | RNVC: 2
1PA39630-28497: RNCC: 5 | RNVC: 2

10 Apr 1979

5340-15-193-8162
Mounting Plate

151938162
SPE-J-943-A-9001/149: RNCC: 3 | RNVC: 2
(241)A0019SPE-J-943-A-9001/149: RNCC: 5 | RNVC: 2

19 Jul 2010

5340-15-100-1079
Chiavistello

151001079
P-882558-403: RNCC: 3 | RNVC: 2
P882558-403: RNCC: 5 | RNVC: 2

10 Sep 1986

5340-15-231-7909
Paracolpo Anteriore

152317909
UT/SA/0009/9: RNCC: 3 | RNVC: 2
534015E122757: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-138-5371
Tassello

151385371
7601457: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-135-9608
Tassello Elastici

151359608
1380087: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-187-8833
Plug

151878833
00886R0630: RNCC: 3 | RNVC: 2
88663: RNCC: 3 | RNVC: 2

19 May 2009

5340-15-152-8766
Threaded End Tensioning Tie Rod

151528766
121197121/1: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-231-6705
Fascetta

152316705
1-1-1321: RNCC: 3 | RNVC: 2
534015E088688: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-142-3675
Maniglia

151423675
MS90-0061-03: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-212-1700
Fissatubo 0 20

152121700
FGRI20: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-217-2056
Sigilli Per Rigetta

152172056
SIGILLIMM13: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-220-0459
Pann.Alto 2400Hx574

152200459
S1-65: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-207-7287
Extension Drawer Slide

152077287
P-949226-001: RNCC: 3 | RNVC: 2

15 Nov 2012

5340-15-202-7262
Half Hinge

152027262
212-4600-14-3: RNCC: 3 | RNVC: 2
(241)A0126212-4600-14-3: RNCC: 5 | RNVC: 2

2 Jul 2007

5340-15-157-9272
Supporto Speciale

151579272
0-171385: RNCC: 3 | RNVC: 2
1PA39630-171385: RNCC: 5 | RNVC: 2
(241)A39630-171385: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-040-1640
Fascetta

150401640
1-2756-128-24446-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-116-7893
Manual Control Lever

151167893
DPR24136/1-27-128: RNCC: 3 | RNVC: 2

29 Nov 1993

5340-15-201-9674
Riparo Dx

152019674
79081838: RNCC: 3 | RNVC: 2
(241)AD75179081838: RNCC: 5 | RNVC: 2
79081838: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-15-145-1549
Brake Handle

151451549
440032: RNCC: 5 | RNVC: 2
F26: RNCC: 5 | RNVC: 9

20 May 1997

5340-15-213-6503
Tassello Da 6Mm Con

152136503
TASSELLODA6MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-149-1807
Peso Di Bilanciamen

151491807
2401-0047-003: RNCC: 3 | RNVC: 2

15 Dec 1998

5340-15-001-1300
Belt Assy

150011300
109-0713-56-111: RNCC: 3 | RNVC: 2

31 May 2013

5340-15-172-1506
Molla Bottone Calci

151721506
MOLLA BOTTONE CALCIO BERETTA SC/: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-237-3809
Catenaccio Vertical

152373809
44855-50: RNCC: 3 | RNVC: 2
534015E089520: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-149-3426
Rubber Bumper

151493426
60162836: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-15-109-8877
Control Rod

151098877
468388: RNCC: 3 | RNVC: 2
D0468388: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-067-4643
Handwheel

150674643
020D3651-7: RNCC: 2 | RNVC: 2
020D3651-7: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-15-108-6511
Chiusura A Ginocchi

151086511
60144140: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-210-5462
Piombo X Sigillo Da

152105462
PIOMBOXSIGILLOMM10: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-9291
Semicerniera

151209291
113A6031-751: RNCC: 3 | RNVC: 2

5 Sep 1995

5340-15-120-2708
Helical Compression Spring Seat

151202708
1288599: RNCC: 3 | RNVC: 2

9 Mar 1995

5340-15-215-0321
Fascetta Per Cablag

152150321
L6651/2-203: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-212-4294
Staffa X Custodia T

152124294
EULWBM: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-220-2417
Tassello Nylon Con

152202417
SB9-6: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-063-3920
Flexible Surface Mechanical Patch

150633920
4.112.102: RNCC: 3 | RNVC: 2

7 Oct 1982

5340-15-179-8002
Counterweight

151798002
6-00-021: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-125-3970
Clamp

151253970
A-1040902-105: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-113-0389
Handwheel

151130389
05.61.3/5249POS.4: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-040-2436
Nottolino

150402436
2-5281-4-01-29274: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-155-6690
Rubber Bumper

151556690
100126080: RNCC: 3 | RNVC: 2

15 May 2002

5340-15-101-6278
Dust And Moisture Seal Protective Plug

151016278
1CDZ051: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-108-8929
Control Rod

151088929
4711513: RNCC: 3 | RNVC: 2
4711513: RNCC: 5 | RNVC: 2

14 Jun 1988

5340-15-058-2135
Escutcheon Plate

150582135
1127-21-698: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-138-5424
Staffa

151385424
7614108: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-104-8916
Fissaggio Gaffetta

151048916
4-676: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-4858
Handle

151124858
15NN2013-4: RNCC: 3 | RNVC: 2
15NN2013-4: RNCC: 5 | RNVC: 9
15NN2013-4: RNCC: 5 | RNVC: 9

7 Sep 1989

5340-15-178-9150
Turnbuckle

151789150
O-O 5/8: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-062-9209
Double Angle Bracket

150629209
0-100386: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-057-1439
Clevis Rod End Spec

150571439
2-3087-301-42016-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-113-7943
Cerniera Portello A

151137943
129-0640-37-101: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-105-5981
Staffa A Gomito

151055981
8830849: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-141-1196
Collare Serraggio 1

151411196
1131: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-119-7393
Sleeve Thre

151197393
01TL23245: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-131-9448
Turnbuckle

151319448
L550211: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-126-4543
Anello

151264543
XC2285: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-115-6117
Supporto Metallico

151156117
D0471843: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-004-9974
Staffa Serbatoio

150049974
483540: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-105-5982
Staffa A Gomito

151055982
587456: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-182-4374
Serratura A Doppia

151824374
57255-60: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-061-4509
Rim Clen Clamp (1)

150614509
000200299600: RNCC: 5 | RNVC: 2
000200299600: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-004-2447
Rim Clen Clamp (1)

150042447
L304BA: RNCC: 5 | RNVC: 2
L304BA: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-162-6322
Shock Absorber

151626322
MPSE-2: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-15-040-7327
Perno

150407327
2-5331-104-32232: RNCC: 3 | RNVC: 2
2-5331-1-04-32232: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-156-3634
Upper Front Support

151563634
(241)A3460CBD71408P05: RNCC: 3 | RNVC: 2
CBD71408P05: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-112-1216
Electrical-Me Post

151121216
DE013.15.341: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-15-187-6491
Fitting Assy (Rh)

151876491
109-0714-95-108: RNCC: 3 | RNVC: 2
(241)A0126109-0714-95-108: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-166-5116
Lucchetto Cisa Di 5

151665116
CISA50: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-104-8910
Fissaggio Gaffetta

151048910
717660: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-162-1884
Multiple Angle Bracket

151621884
109-0613-30-101: RNCC: 3 | RNVC: 2

3 Apr 2001

5340-15-179-7072
Fitting

151797072
0000500404247: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-002-8619
Descaling Cap

150028619
R58005680: RNCC: 3 | RNVC: 2
ASC30048: RNCC: 5 | RNVC: 2

10 Oct 2013

5340-15-205-8625
Bumper

152058625
5801397957: RNCC: 3 | RNVC: 2

6 Apr 2012

5340-15-112-8430
Indice

151128430
469690: RNCC: 3 | RNVC: 2
D0469690: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-136-0437
Tubazione Di Scaric

151360437
4393778: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-005-6494
Coperchio Speciale

150056494
0-28534: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-061-3820
Coperchio Sagomato

150613820
P36CB33: RNCC: 5 | RNVC: 2
P36CB33: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-136-1352
Bottone

151361352
5968244: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-127-2958
Anello Elastico Rit

151272958
702134: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-063-2259
Rubber Bumper

150632259
P-894808-001: RNCC: 3 | RNVC: 2
P894808-001: RNCC: 5 | RNVC: 2

1 Feb 1983

5340-15-117-1728
Cerniera(Meta)A Nas

151171728
67287-101: RNCC: 3 | RNVC: 2
67287-101A00: RNCC: 5 | RNVC: 2

25 Aug 1993

5340-15-137-1875
Ammortizzatore

151371875
J3804-20: RNCC: 3 | RNVC: 2
J3804-20: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-195-3572
Ancorante Pesante H

151953572
371778: RNCC: 3 | RNVC: 2
(241)AD237371778: RNCC: 5 | RNVC: 2

16 Mar 2011

5340-15-156-3901
Reaction Bush

151563901
(241)A3460CBD71349P07: RNCC: 3 | RNVC: 2
CBD71349P07: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-153-7413
Forcella Testa Di T

151537413
142061327: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-006-2567
Guida Speciale

150062567
0-28873: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-121-7134
Dust And Moisture Seal Protective Cap

151217134
NOR383-4: RNCC: 3 | RNVC: 2
N0R383-4: RNCC: 5 | RNVC: 9

6 Feb 1996

5340-15-231-1113
Copritoppa Interna

152311113
06082: RNCC: 3 | RNVC: 2
534015E066567: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-144-6632
Tassello

151446632
4546355: RNCC: 3 | RNVC: 2
8584522: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-074-4077
Turnbuckle

150744077
2B12UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-149-5227
Access Cover

151495227
112712206: RNCC: 3 | RNVC: 2

26 Oct 1999

5340-15-118-8409
Corrosion Preventive Anode

151188409
590.16324.3: RNCC: 3 | RNVC: 2
RAR3567: RNCC: 5 | RNVC: 2
590.16324.3: RNCC: 5 | RNVC: 2

4 Jul 1994

5340-15-147-9618
Staffa Ancoraggio

151479618
P3383POS.3: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-15-119-7578
Hook Hold D

151197578
244492-P1: RNCC: 3 | RNVC: 2
244492-P1: RNCC: 5 | RNVC: 2
244492-P1: RNCC: 5 | RNVC: 9

17 Nov 1994

5340-15-200-7808
Golfare

152007808
C-M10: RNCC: 3 | RNVC: 2

26 Feb 2006

5340-15-107-1728
Rim Clen Clamp (1)

151071728
RS414318AA: RNCC: 3 | RNVC: 2

1 Sep 1989

5340-15-152-3501
Double Angle Bracket

151523501
0-157753: RNCC: 3 | RNVC: 2
00157753: RNCC: 3 | RNVC: 2
(241)A39630-157753: RNCC: 5 | RNVC: 2
1PA39630-157753: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-068-4727
Blocchetto

150684727
206-1015-59-1: RNCC: 3 | RNVC: 2

30 May 1986

5340-15-005-4048
Access Cover Plate

150054048
1276-09-310: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-104-8881
Fissaggio Gaffetta

151048881
1354941: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-104-8922
Fissaggio Gaffetta

151048922
849443: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-156-2031
Seal S14 Assy Base

151562031
(241)A3460CBD71194G01: RNCC: 3 | RNVC: 2
CBD71194G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-153-6971
Tappo Di Protezione

151536971
111115243: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-163-3972
Runner

151633972
9842258: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-114-6964
Spe Pistra Di Fermo

151146964
39A1700-39-01: RNCC: 3 | RNVC: 2

24 Jul 1992

5340-15-041-0602
Calzatura Interna

150410602
2-3213-100-25837-1: RNCC: 3 | RNVC: 2
2-3213-1-00-25837-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-117-4870
Fermo Finestrino

151174870
26317-101B00: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-15-202-3567
Bush Fork Support

152023567
DDEF2808-02: RNCC: 3 | RNVC: 2

28 Feb 2007

5340-15-063-8856
Helical Compression Spring Seat

150638856
78841: RNCC: 3 | RNVC: 2

15 Sep 1982

5340-15-196-9912
Padlock

151969912
PN UAS 00037061: RNCC: 3 | RNVC: 2
5340F76031828: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-221-7841
Tassello In Legno I

152217841
TASSELLOLEGNOMM6: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-230-5069
Fermo

152305069
818.853: RNCC: 3 | RNVC: 2
534015E132176: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-109-9016
Assieme Tappo

151099016
465859: RNCC: 3 | RNVC: 2
D0465859: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-186-8247
Key Blank

151868247
CB6-OR: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-222-1161
Chiavi Per Serratur

152221161
CHIAVIXSERRATURA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-201-6631
Rubber Bumper

152016631
N523G5240202: RNCC: 3 | RNVC: 2
(241)A0126N523G5240202: RNCC: 5 | RNVC: 2

9 Nov 2006

5340-15-105-2539
Piastra Rattoppo Ri

151052539
999690129M: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-060-2291
Maniglia Finestrino

150602291
10525: RNCC: 3 | RNVC: 2

2 Dec 1976

5340-15-007-0270
Helical Compression Spring Retainer

150070270
P-884038-001: RNCC: 3 | RNVC: 2
P884038-001: RNCC: 5 | RNVC: 2

20 Nov 1979

5340-15-138-6750
Tappo

151386750
5600-600-101: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-115-0220
Coperchio

151150220
01-02-622-27-B: RNCC: 3 | RNVC: 2

16 Jun 1993

5340-15-066-1721
Bracket

150661721
P-892990-001: RNCC: 3 | RNVC: 2
P892990-001: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-009-2901
Cinghietto Fissaggi

150092901
7-8873-100-49199: RNCC: 3 | RNVC: 2

2 Sep 1980

5340-15-074-4427
Turnbuckle

150744427
2B6UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4032
Turnbuckle

150744032
2A10UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-020-2618
Dust And Moisture Seal Protective Cap

150202618
01-098-01-82: RNCC: 3 | RNVC: 2
55.41.068.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-170-8627
Clip Di Fissaggio X

151708627
67318-03/101: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-151-9828
Staffa

151519828
0-153316: RNCC: 3 | RNVC: 2
00153316: RNCC: 3 | RNVC: 2
(241)A39630-153316: RNCC: 5 | RNVC: 2

31 Jul 2000

5340-15-180-6425
Piastrina Per La Ce

151806425
51.051: RNCC: 3 | RNVC: 2
(241)A714651.051: RNCC: 5 | RNVC: 2

27 Jun 2008

5340-15-157-6450
Multiple Angle Bracket

151576450
NTA23755-2: RNCC: 3 | RNVC: 2

12 Oct 2003

5340-15-150-2348
Rubber Bumper

151502348
A0035410: RNCC: 3 | RNVC: 2

27 Aug 1999

5340-15-175-8404
Piastra Per Chiudip

151758404
PIASTRAPERCHIUDIPORTA: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-056-5734
Resilient Mount

150565734
29280: RNCC: 3 | RNVC: 2
1276-06-267: RNCC: 5 | RNVC: 2
127606267: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-006-2732
Cerniera Speciale

150062732
0-33944: RNCC: 3 | RNVC: 2
00033944: RNCC: 3 | RNVC: 2
(241)A39630-33944: RNCC: 5 | RNVC: 2
(241)A396300033944: RNCC: 5 | RNVC: 2

10 Apr 1979

5340-15-188-2899
Dust And Moisture Seal Protective Plug

151882899
SPLT.25003: RNCC: 3 | RNVC: 2
336621183134: RNCC: 5 | RNVC: 2
A2/STD/3338C ITEM 1: RNCC: 5 | RNVC: 2
SPLT.25003: RNCC: 5 | RNVC: 2

1 Sep 2009

5340-15-213-8885
Fermaporta A Pedale

152138885
2341IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-134-4415
Staffa

151344415
6337106Q: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-194-3952
Wear Parts

151943952
KL35AAZ: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-201-9723
Handwheel

152019723
TL1018-04: RNCC: 3 | RNVC: 2
(241)AD751TL1018-04: RNCC: 5 | RNVC: 2
TL1018-04: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-15-153-7661
Base (1) Per Sosteg

151537661
01800A120600: RNCC: 5 | RNVC: 2
01800A120600: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-186-3832
Distanziatore 4 Mm

151863832
4 MM: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-118-9728
Corrosion Preventive Anode

151189728
590-62487: RNCC: 3 | RNVC: 2
59062487: RNCC: 3 | RNVC: 2
59062487: RNCC: 5 | RNVC: 2
590-62487: RNCC: 5 | RNVC: 2
590.62209.3: RNCC: 5 | RNVC: 9

4 Jul 1994

5340-15-058-6466
Tampone Gomma

150586466
1562-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-141-1198
Collare Serraggio 1

151411198
1134: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-052-0445
Morsetto Serratubi

150520445
M740-20-14A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-118-0457
Flangia Attacco A V

151180457
D0487942: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-218-2097
Piombini Per Imball

152182097
PIOMBINIMM11: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-2848
Breec Upper Support

151152848
518042370: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-218-4447
Grillo Zincato

152184447
UNI1947A: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-203-8595
Cap

152038595
58100347: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-15-114-7791
Resilient Mount

151147791
629.8636.065: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-169-8502
Lucchetto Speciale

151698502
F72019217: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-064-9427
Piastra

150649427
MC315-1-250/E: RNCC: 3 | RNVC: 2

28 Aug 1979

5340-15-008-7510
Rubber Bumper

150087510
109-0611-68-3: RNCC: 3 | RNVC: 2

29 Apr 1982

5340-15-005-4573
Dust And Moisture Seal Protective Cap

150054573
1137-11-139: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-170-8062
Manicotto Segnacavo

151708062
340-0542/02: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-109-1541
Metallo Cuneo

151091541
100900329600: RNCC: 5 | RNVC: 2
100900329600: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-15-180-4993
Anello Isolante

151804993
17334780: RNCC: 3 | RNVC: 2
(241)A424917334780: RNCC: 5 | RNVC: 2

6 Jun 2008

5340-15-197-8630
Assieme Blocchetto

151978630
N523G5047101: RNCC: 3 | RNVC: 2

21 May 2004

5340-15-116-8572
Gruppo Puntalino

151168572
D1302611: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-101-8482
Control Rod

151018482
SF260-11-308-01: RNCC: 3 | RNVC: 2
SF260-11-308-01: RNCC: 5 | RNVC: 9

14 Dec 1987

5340-15-005-1081
Rubber Bumper

150051081
1137-07-138: RNCC: 3 | RNVC: 2

10 Apr 1978

5340-15-199-4061
Set Dischi Freno

151994061
64599100477D/32: RNCC: 3 | RNVC: 2
(241)A487464599100477D/32: RNCC: 5 | RNVC: 2

21 Mar 2005

5340-15-127-4174
Pomello

151274174
1413-42-145: RNCC: 3 | RNVC: 2
1413-42-145: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-151-7082
Staffa

151517082
0-176127: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-199-8468
Anchor Strap

151998468
9CS3703033: RNCC: 3 | RNVC: 2
(241)A91729CS3703033: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-114-7357
Bustaportaguarnizio

151147357
D0490775: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-112-8428
Battenteperm

151128428
469664: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-103-1871
Razza

151031871
DE013.09.780: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-122-1550
Coperchio Attuatore

151221550
D0466924: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-211-8781
Bese In Acciaio Ner

152118781
NB0060: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-153-9254
Accesso Sportello

151539254
142010293: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-207-3391
Adapter

152073391
3092001-00: RNCC: 3 | RNVC: 2

9 Oct 2012

5340-15-157-4204
Pattino Di Metallo

151574204
21505705: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-118-0362
Corpo Piastrina Di

151180362
D0472345: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-112-6735
Screw Thread Insert

151126735
CP-8201-30: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-107-2568
Electrical-Me Post

151072568
5054-28: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-045-3985
Control Rod

150453985
N0R5-311-03-2-70: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-141-5115
Supporto Elastico

151415115
98.3.00780/B: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-067-2628
Fascetta

150672628
S252-40: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-176-1556
Fibra Abrasiva Gran

151761556
0585-805-180: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-110-7901
Piastra

151107901
109-0510-29-1: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-054-9773
Fascia Fissacavo Sp

150549773
204-7700-97-1: RNCC: 3 | RNVC: 2
204-7700-971: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-049-6454
Calzatura

150496454
2-2745-101-41942: RNCC: 3 | RNVC: 2
2-2745-1-01-41942: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-154-0938
Staffa

151540938
0-150505: RNCC: 3 | RNVC: 2
(241)A39630-150505: RNCC: 5 | RNVC: 2
1PA39630-150505: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-106-4435
Scodellino

151064435
22159: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-114-1181
Dispositivo Di Bloc

151141181
8203.20.24B: RNCC: 3 | RNVC: 2

11 Dec 1992

5340-15-120-6719
Coperchio Inferiore

151206719
D0486617: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-112-8542
Coperchios

151128542
D0471294: RNCC: 3 | RNVC: 2
471294: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-102-8374
Piastrina Perno

151028374
K940-12-66-02: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-105-8738
Attacco Cinghia

151058738
02-096-E-14-11: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-170-8206
Piastrina Di Trasci

151708206
340-1005/10.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-114-7327
Piastrinaantisvitam

151147327
D0491242: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-074-4446
Turnbuckle

150744446
1C27UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-213-8343
Tassello Con Gancio

152138343
TASSELLOMM18: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-181-4469
Scatola Emi

151814469
GRP421: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-153-8040
Locking Plate

151538040
4130-15: RNCC: 3 | RNVC: 2
4130-15: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-068-0806
Dust And Moisture Seal Protective Cap-Plug

150680806
32.80.029.0: RNCC: 3 | RNVC: 2
32800290: RNCC: 5 | RNVC: 2

15 Oct 1982

5340-15-105-4200
Po Tappo Protezione

151054200
594633: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-155-0963
Resilient Mount

151550963
122650218: RNCC: 2 | RNVC: 3

18 Jan 2002

5340-15-153-2878
Destra Cerniera

151532878
122505312: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-115-2391
Support

151152391
1137-07-196: RNCC: 3 | RNVC: 2

29 Nov 1992

Load More Results