What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 61 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 61 of 72

5340-15-051-4254
Molla

150514254
9911899: RNCC: 3 | RNVC: 2
170072: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-147-5799
T-Fitting

151475799
98RV899: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-074-4260
Turnbuckle

150744260
1A8UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-3668
Turnbuckle

150743668
2C8UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-003-7519
Dust And Moisture Seal Protective Cover

150037519
00062: RNCC: 3 | RNVC: 2

20 Nov 2013

5340-15-074-4335
Turnbuckle

150744335
2B36UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4386
Turnbuckle

150744386
2C76UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-209-0113
Coperchio

152090113
N3510: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-166-5088
Cap Metal

151665088
CA23222: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-188-8256
Bracket Plate

151888256
109-3101-14-17: RNCC: 3 | RNVC: 2

25 Nov 2009

5340-15-202-4588
Ball Track Ring

152024588
920-1534/01: RNCC: 3 | RNVC: 2
(241)A4582920-1534/01: RNCC: 5 | RNVC: 2

27 Mar 2007

5340-15-158-4427
Hook

151584427
26908-101: RNCC: 3 | RNVC: 2

15 Feb 2004

5340-15-142-6184
Cappuccio Rame

151426184
7560/3: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-153-7347
Testa Di Tirante Fi

151537347
142057150: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-122-9841
Rondella

151229841
4627962: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-117-9335
Maniglia Sbloccaggi

151179335
142514126: RNCC: 3 | RNVC: 2

8 Feb 1994

5340-15-109-7905
Dust And Moisture Seal Protective Cap-Plug

151097905
328793P1: RNCC: 3 | RNVC: 2

2 Apr 1990

5340-15-107-2504
Dust And Moisture Seal Protective Plug

151072504
3070-04: RNCC: 3 | RNVC: 2
3070-000004: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-152-3549
Multiple Angle Bracket

151523549
00173970: RNCC: 3 | RNVC: 2
0-173970: RNCC: 3 | RNVC: 2
(241)A39630-173970: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-062-0094
Clamp Loop

150620094
31050-06: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-143-5351
Telaio

151435351
445: RNCC: 3 | RNVC: 2
542-146: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-176-3409
Maniglia Incasso Gh

151763409
90873: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-007-3315
Anchor Strap

150073315
1376-31-177: RNCC: 3 | RNVC: 2
137631177: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-109-2592
Double Angle Bracket

151092592
369-09071-105: RNCC: 3 | RNVC: 2

6 Nov 1989

5340-15-119-5402
Fondello Cilindro S

151195402
D0484494: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-179-0034
Plate

151790034
RS 413 775 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-074-4385
Turnbuckle

150744385
2C72UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-105-8948
Tirante A Teste Fil

151058948
015.1762.2: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-152-1103
Vehicular Seat Bracket

151521103
60139044: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-115-7132
Flangiatubomisurain

151157132
D0472456: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-233-7761
F Maniglia Ad Arco

152337761
1500/IC/III-08.09.58-89: RNCC: 2 | RNVC: 2
534015E078133: RNCC: 5 | RNVC: 9

24 Aug 2007

5340-15-040-8373
Molla A Estensione

150408373
7-5947-101-33171: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-149-5199
Evacuabos Portello

151495199
1127-07-033: RNCC: 3 | RNVC: 2
112707033: RNCC: 3 | RNVC: 2

18 Jan 2000

5340-15-107-1183
Nonrotating Shaft Eye Bracket

151071183
301-01-8030: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-007-5010
Nonrotating Shaft Eye Bracket

150075010
1139-02-900: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-102-3315
Cap

151023315
NS4C009-1: RNCC: 3 | RNVC: 2
NS4C009-1: RNCC: 5 | RNVC: 9

19 Jul 1988

5340-15-109-6279
Supporto Girevole E

151096279
002945: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-121-6673
Turnbuckle

151216673
800064679: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-118-0403
Coperchio Portaguar

151180403
D0484606: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-055-6230
Staffa Fissaggio

150556230
722924: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-122-2732
Hublot Maitre Cylin

151222732
800049654: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-115-2332
Hand Lever

151152332
518022870: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-189-5239
Distanziatore

151895239
JA6544-1: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-074-4372
Turnbuckle

150744372
2C12UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-193-3378
Turnbuckle

151933378
MECC 21910: RNCC: 3 | RNVC: 2

6 May 2010

5340-15-160-9986
Lucchetto S&G

151609986
F720181781: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-216-8882
Fermaglio Di Ritenu

152168882
839-274: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-113-7933
Semicerniera

151137933
129-0640-50-139: RNCC: 3 | RNVC: 2

27 Feb 1992

5340-15-148-2807
Assieme Tappo Di Ca

151482807
PNE301011-001: RNCC: 3 | RNVC: 2

20 Jul 1998

5340-15-078-0843
Morsetto

150780843
TM01-63-92: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-177-9998
Piastra Di Montaggi

151779998
412-7711-05-105: RNCC: 3 | RNVC: 2

25 Aug 2004

5340-15-220-0422
Blind Fastner

152200422
MBF2123-8-200: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-4822
Helical Compression Spring Seat

151184822
02.0709.A.04: RNCC: 3 | RNVC: 2
02.0709.A.04: RNCC: 5 | RNVC: 9

7 Feb 1995

5340-15-219-3761
Tassello 6X30 Con V

152193761
6X30: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-218-4615
Sonda Tirafili Ml.5

152184615
TDI0305: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-005-6498
Tappo Speciale

150056498
0-28528: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-236-1020
Tassello In Nylon M

152361020
SX6: RNCC: 3 | RNVC: 2

27 Aug 2007

5340-15-006-2549
Raschiatore Special

150062549
0-28866: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-139-2707
Lucchetto A Combina

151392707
4630: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-105-5985
Staffa A Gomito

151055985
752439: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-187-3434
Extension Drawer Slide

151873434
071921: RNCC: 3 | RNVC: 2
(241)A3593071921: RNCC: 5 | RNVC: 2

17 Mar 2009

5340-15-105-5960
Staffa A Gomito

151055960
4615800: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-153-9508
Base (1) Per Sosteg

151539508
142065171: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-006-7025
Cap Threade

150067025
28546-001: RNCC: 5 | RNVC: 2
28546-001: RNCC: 5 | RNVC: 9
28546-001: RNCC: 5 | RNVC: 9

9 Jan 1980

5340-15-220-0492
Angol. Caland. R 15

152200492
S1-7E: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-065-3199
Piastrina Di Arrest

150653199
P-893047-001: RNCC: 3 | RNVC: 2
P893047-001: RNCC: 5 | RNVC: 2

19 Feb 1985

5340-15-068-5787
Seat Helical Compre

150685787
71056F9: RNCC: 3 | RNVC: 2
71056F9: RNCC: 5 | RNVC: 2
73730F91: RNCC: 5 | RNVC: 9

18 May 1999

5340-15-105-5993
Staffa A Gomito

151055993
D6478/2: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-183-4097
Cerniera A Tappo

151834097
ART.430: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-206-5772
Corrosion Preventive Anode

152065772
FX10: RNCC: 3 | RNVC: 2
(241)A3121FX10: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-111-7966
Double Angle Bracket

151117966
9977: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-152-2295
Tassello Gomma

151522295
42531937: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-15-106-9545
Supporto

151069545
4576632: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-107-1844
Lever

151071844
RS304897A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-106-5405
Staffa Fissaggio

151065405
4747572: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-6937
Supporto Microswitc

151206937
D0468237: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-166-5039
Bracket

151665039
311A2510021: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-121-9193
Resilient Mount

151219193
93801623: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-118-0320
Coperchio Con Fori

151180320
D0467475: RNCC: 3 | RNVC: 2

15 Nov 1994

5340-15-055-6840
Staffetta Destra At

150556840
527852: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-149-6197
Plate

151496197
518-38-2290: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-115-1952
Lever

151151952
560-5200-194: RNCC: 3 | RNVC: 2
82-00768: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-177-9995
Piastra Di Chiusura

151779995
9AA8660H034-001: RNCC: 3 | RNVC: 2

25 Aug 2004

5340-15-180-4275
Optic Reinforcement

151804275
205-1600-14-121: RNCC: 3 | RNVC: 2
(241)A0126205-1600-14-121: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-104-8906
Fissaggio Gaffetta

151048906
750/58: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-066-4875
Impugnatura Special

150664875
T0085/R13: RNCC: 3 | RNVC: 2

1 Mar 1986

5340-15-006-4338
Helical Compression Spring Seat

150064338
8818691: RNCC: 3 | RNVC: 2

5 Nov 1979

5340-15-188-0848
Manual Control Lever

151880848
157611183: RNCC: 3 | RNVC: 2

2 Jul 2009

5340-15-089-9365
Dust And Moisture Seal Protective Cap

150899365
A64204: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-074-4063
Turnbuckle

150744063
1B39UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-114-7160
Control Rod

151147160
03-619-A-23: RNCC: 1 | RNVC: 3
(7001)5340151147160: RNCC: 3 | RNVC: 2
52996: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-15-149-4378
Assieme Manica Di B

151494378
M930-20-20A: RNCC: 3 | RNVC: 2

1 Mar 1999

5340-15-192-2639
Lock Washer

151922639
14218-004: RNCC: 3 | RNVC: 2

2 Mar 2010

5340-15-189-1676
Trasparent Assy (Lh

151891676
109-0822-68-151: RNCC: 3 | RNVC: 2

1 Feb 2010

5340-15-113-8596
Threaded End Tensioning Tie Rod

151138596
1Z 590165: RNCC: 3 | RNVC: 2
1Z 590165: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-067-0195
Zinco

150670195
43269-44635AZ: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-118-0501
Lastrina Protezione

151180501
489906: RNCC: 3 | RNVC: 2
D0489906: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-156-2018
Interface Base Assy

151562018
CBD71209G01: RNCC: 3 | RNVC: 2
(241)A3460CBD71209G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-103-4318
Klemhouder

151034318
25.78.56.01: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-055-6570
Squadretta

150556570
545885: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-166-5149
Parte Fissa Chiusur

151665149
51L7: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-054-1743
Spina Cerviera

150541743
260-18-17-11: RNCC: 3 | RNVC: 2
260-18-17-11: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-116-7815
Sostegno Per Suppor

151167815
8106C/55: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-15-148-2808
Assieme Tappo Di Ca

151482808
PNE301011-002: RNCC: 3 | RNVC: 2

20 Jul 1998

5340-15-055-8288
Maniglia

150558288
330-0182-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-051-9853
Resilient Mount

150519853
7723808-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-216-0283
Lucchetto Ad Arco C

152160283
110.40KA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-105-6017
Staffa A Gomito

151056017
1367000: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-009-6578
Silentblock Special

150096578
0-06536: RNCC: 3 | RNVC: 2

28 Aug 1978

5340-15-007-7596
Piastra Speciale

150077596
0-25188: RNCC: 3 | RNVC: 2

23 Apr 1980

5340-15-139-7106
Bloccaggio Pianale

151397106
A.0150800: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-110-2797
Bracket Ang

151102797
P125384-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-153-3362
Structual Angle

151533362
109-0640-57-20: RNCC: 3 | RNVC: 2

14 Dec 2000

5340-15-109-3519
Manicotto

151093519
OP-07.12: RNCC: 3 | RNVC: 2

16 Oct 1989

5340-15-195-0151
Tip Protection Assy

151950151
CBD71200G02: RNCC: 3 | RNVC: 2
(241)A3460CBD71200G02: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-121-7519
Chiusura Speciale

151217519
8506034: RNCC: 3 | RNVC: 2
1PA34888506034: RNCC: 5 | RNVC: 2

14 Feb 1996

5340-15-115-7150
Paletterotantiserie

151157150
D0470351: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-201-0067
Dust And Moisture Seal Protective Cap

152010067
CD-411: RNCC: 3 | RNVC: 2

10 May 2006

5340-15-107-1186
Resilient Mount Plate

151071186
301-01-2260: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-120-6753
Anello Di Battuta I

151206753
D1406180: RNCC: 3 | RNVC: 2

29 Jun 1996

5340-15-231-1436
Staffetta

152311436
10116301: RNCC: 3 | RNVC: 2
534015E079182: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-136-0433
Tirante

151360433
9927107: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-114-7573
Retain Ring

151147573
15UNI7435-75: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-133-2624
Hook Hold Down

151332624
109365-1C: RNCC: 5 | RNVC: 2
109365-1C: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-134-6424
Tassello

151346424
4358105: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-055-6586
Staffa Destra Per S

150556586
546036: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-150-5888
Access Door

151505888
A37710-01-07: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-231-0954
Handwheel

152310954
744.4: RNCC: 3 | RNVC: 2
209015E081964: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-127-3955
Testa Sferica Per T

151273955
2260-32868: RNCC: 3 | RNVC: 2
2260-32868: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-062-0919
Bumper

150620919
31771-003: RNCC: 5 | RNVC: 2
31771-003: RNCC: 5 | RNVC: 9
31771-003: RNCC: 5 | RNVC: 9

27 Oct 1980

5340-15-049-7529
Fascetta

150497529
AB47-706-217-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-114-5442
Control Rod

151145442
D0480635: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-120-6941
Strozzatore A Vite

151206941
D0467699: RNCC: 3 | RNVC: 2

8 May 1996

5340-15-062-2817
Nut And Bolt Retainer

150622817
4003-33: RNCC: 3 | RNVC: 2

19 Mar 1982

5340-15-004-3913
Double Angle Bracket

150043913
P110263-001: RNCC: 3 | RNVC: 2

27 Jun 1978

5340-15-193-5081
Base Antivibrante

151935081
RAP-1557/01: RNCC: 3 | RNVC: 2

25 May 2010

5340-15-193-9614
Angle Bracket

151939614
S61-0920-13-136: RNCC: 3 | RNVC: 2
(241)A0126S61-0920-13-136: RNCC: 5 | RNVC: 2

4 Aug 2010

5340-15-238-3178
Piano Car Tenditore

152383178
3 X 10 X 10 CM: RNCC: 3 | RNVC: 2
534015E148643: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-204-8873
Pomello Cilindrico

152048873
1570: RNCC: 3 | RNVC: 2
(241)A00691570: RNCC: 5 | RNVC: 2

23 Jan 2012

5340-15-112-8242
Forcella

151128242
466749: RNCC: 3 | RNVC: 2
D0466749: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-202-7894
Speciale Fibbia

152027894
190509441: RNCC: 3 | RNVC: 2

11 Jul 2007

5340-15-199-1536
Turnbuckle

151991536
4765340: RNCC: 3 | RNVC: 2
(241)AE1924765340: RNCC: 5 | RNVC: 2
4765340: RNCC: 5 | RNVC: 2

23 Jan 2005

5340-15-181-3365
Coperchio

151813365
369840116V: RNCC: 3 | RNVC: 2
(241)A424942557442: RNCC: 5 | RNVC: 2
0000042557442: RNCC: 5 | RNVC: 2
42557442: RNCC: 5 | RNVC: 2

3 Dec 2008

5340-15-110-5745
Helical Compression Spring Seat

151105745
525773: RNCC: 2 | RNVC: 2
1P 525773: RNCC: 3 | RNVC: 2
1P 525773: RNCC: 5 | RNVC: 9
525773: RNCC: 5 | RNVC: 9

12 Oct 1996

5340-15-007-9987
Helical Compression Spring Seat

150079987
4601302: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-110-4431
Bellows

151104431
42493815: RNCC: 3 | RNVC: 2
42493815: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-116-2688
Shock Mount Pad

151162688
190520159: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-114-8314
Corredoinstallazion

151148314
188-2012/01: RNCC: 3 | RNVC: 2

12 Aug 1992

5340-15-147-9978
Base Dentata

151479978
129-0640-86-122: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-114-1399
Helical Compression Spring Retainer

151141399
54-0118-042: RNCC: 3 | RNVC: 2

4 Jun 1993

5340-15-204-4532
Utility Resilient Mount

152044532
E1N-3455-51: RNCC: 3 | RNVC: 2
(241)AJ807E1N-3455-51: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-219-8586
Disco A Strappo Dia

152198586
115 GR 60: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-108-0929
Scharnier

151080929
A27604-02-08: RNCC: 3 | RNVC: 2
A27604-02-08: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-122-2720
Poussoir Butee Embr

151222720
800048852: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-074-4052
Turnbuckle

150744052
1B6UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-196-9906
Padlock

151969906
PN UAS 00035838: RNCC: 3 | RNVC: 2
5340F76031001: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-147-0038
Tacchetto Di Guida

151470038
HTR249: RNCC: 3 | RNVC: 2

4 Sep 1997

5340-15-201-3769
Turnbuckle

152013769
3340130: RNCC: 3 | RNVC: 2
(241)A9840SPC2240049: RNCC: 5 | RNVC: 2
SPC2240049: RNCC: 5 | RNVC: 2

30 Jul 2006

5340-15-235-6431
Fascet Contenitore

152356431
5308: RNCC: 3 | RNVC: 2
534015E077317: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-066-1663
Coupling

150661663
P894987-003: RNCC: 3 | RNVC: 2

10 Feb 1986

5340-15-175-8475
Serratura Yale

151758475
96300/58: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-109-8245
Gancio

151098245
68-600152-001: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-15-111-5978
Holder

151115978
A09309-01-20: RNCC: 3 | RNVC: 2
A09309-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-136-9196
Guida Cavo

151369196
5F1-1-90: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-060-1855
Piastra Cerniera Sp

150601855
98913-1: RNCC: 3 | RNVC: 2

11 Dec 1976

5340-15-108-0680
Gewindebuchse

151080680
A20004-01-22: RNCC: 3 | RNVC: 2
A20004-01-22: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-218-3450
Lama Hss Bimetal

152183450
300Z24: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-114-9106
Flangia

151149106
D0491396: RNCC: 3 | RNVC: 2

5 Sep 1992

5340-15-155-4425
Fixed Clamp

151554425
CBD71047P08: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-153-1590
Torretta Di Sostegn

151531590
W020855: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-15-197-7086
Protezione

151977086
512280: RNCC: 3 | RNVC: 2

20 Apr 2004

5340-15-105-6029
Staffa A Gomito

151056029
000.8710.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-151-7847
Staffa

151517847
0-102174: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-217-7848
Assortimento 2 Colt

152177848
9MME18MM: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-197-7269
Assieme Scodellino

151977269
129-0850-07-111: RNCC: 3 | RNVC: 2

21 Apr 2004

5340-15-186-7771
Bracket

151867771
109-0330-12-61: RNCC: 3 | RNVC: 2
(241)A0126109-0330-12-61: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-113-4786
Seat Pipe Support

151134786
252A1330-001: RNCC: 3 | RNVC: 2

21 Mar 1991

5340-15-189-5294
Barilotto

151895294
850099-101: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-207-0364
Angle Bracket

152070364
1438645: RNCC: 3 | RNVC: 2

20 Aug 2012

5340-15-056-5953
Staffa

150565953
13991: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-148-7014
Inserto

151487014
B515/M-CB-046: RNCC: 3 | RNVC: 2

22 Oct 1998

5340-15-122-1380
Block Retai

151221380
A-39121-001: RNCC: 3 | RNVC: 2
A39121-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-220-0486
Augmentor Sezione D

152200486
S1-22: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-186-4610
Inserto Taglio 5X25

151864610
6450310: RNCC: 3 | RNVC: 2
F5605/25: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-215-9232
Tampone Abrasivo In

152159232
D9697-280: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-191-3161
Insert

151913161
8982327P006: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-198-3278
Corrosion Preventive Anode

151983278
DN70DC76: RNCC: 3 | RNVC: 2

22 Sep 2004

5340-15-120-6803
Piastra Di Collegam

151206803
D0487817: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-179-6911
Double Angle Bracket

151796911
0000500413204: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-166-4799
Alberino E Rondella

151664799
568: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-063-3675
Threaded End Tensioning Tie Rod

150633675
60107831: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-188-3202
Dust And Moisture Seal Protective Plug

151883202
AD030621B: RNCC: 3 | RNVC: 2

2 Sep 2009

5340-15-151-5524
Dust And Moisture Seal Protective Cap-Plug

151515524
960863: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-15-139-3248
Tirante

151393248
1392753: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-112-2889
Testa Di Tirante

151122889
211A7189-001: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-178-3874
Resilient Mount

151783874
P531109: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-102-1356
Plate Mirror

151021356
306838G1: RNCC: 3 | RNVC: 2

13 Oct 1988

5340-15-122-9232
Inserto

151229232
SL2052-3-6: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-121-8645
Hinge Assy And Ap

151218645
9CA1780A197-201: RNCC: 3 | RNVC: 2

12 Mar 1996

5340-15-153-7003
Base (1) Per Sosteg

151537003
121228215: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-179-6874
Double Angle Bracket

151796874
0000500400590: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-193-9888
Dust And Moisture Seal Protective Cover

151939888
390.00: RNCC: 3 | RNVC: 2

11 Aug 2010

5340-15-122-6950
Gradino Ripiegabile

151226950
SH4254-401: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-220-0500
Porta Rdl 1000 Wx21

152200500
S1-13A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-116-8991
Sostegno Elastico S

151168991
M04286: RNCC: 3 | RNVC: 2

23 Nov 1993

5340-15-147-0933
Jeu De 2 Electrodes

151470933
025025080: RNCC: 3 | RNVC: 2
F300 0T 023 1820: RNCC: 6 | RNVC: 9

21 Aug 1997

5340-15-149-1177
Double Angle Bracket

151491177
60187286: RNCC: 3 | RNVC: 2

2 Dec 1998

5340-15-211-8763
Coppia Di Mensole 3

152118763
NB1011: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-109-8348
Catenella

151098348
67-103103-065: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-15-120-7558
Ass

151207558
982150503: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-105-5999
Staffa A Gomito

151055999
4970764: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-058-6744
Doppio Cilindro Di

150586744
1971-036SN: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-169-3560
Serratura

151693560
F72010962: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-153-7668
Base (1) Per Sosteg

151537668
T0064256: RNCC: 5 | RNVC: 2
01830A122760: RNCC: 5 | RNVC: 2
01830A122760: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-138-6586
Staffa Fissaggio

151386586
2971-1: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-153-7009
Testa Di Tirante Fi

151537009
125617183: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-051-3681
Coprispigolo

150513681
4507073: RNCC: 3 | RNVC: 2
4507073: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-179-7042
Rod

151797042
OC 76 B02: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-111-4658
Blocchetto Completo

151114658
C7260-W14-B1: RNCC: 3 | RNVC: 2
C7260-W14-B1: RNCC: 5 | RNVC: 2
C7260-W14-B1: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-15-064-7175
Nut And Bolt Locking Plate

150647175
01-245-F-010: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-068-2772
Door Hinge Half

150682772
SF260-01-55-23: RNCC: 3 | RNVC: 2
SF260-01-55-23: RNCC: 5 | RNVC: 9

20 May 1986

5340-15-106-7037
Arresto Ch Supporto

151067037
503-03-0221: RNCC: 5 | RNVC: 2
503-03-0221: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-187-6454
Shaft(Lh)

151876454
109-0362-11-103: RNCC: 3 | RNVC: 2
(241)A0126109-0362-11-103: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-148-4972
Headless Straight Rod

151484972
98428769: RNCC: 3 | RNVC: 2
(241)A424998428769: RNCC: 5 | RNVC: 2

13 Aug 1999

5340-15-198-9320
Dust And Moisture Seal Protective Plug

151989320
A196A625W: RNCC: 3 | RNVC: 2
(241)A0126A196A625W: RNCC: 5 | RNVC: 2

30 Nov 2004

5340-15-134-6316
Tassello Elasti

151346316
10239: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-074-4305
Turnbuckle

150744305
1B10UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-156-3674
Support Plate

151563674
(241)A3460CBD71405P04: RNCC: 3 | RNVC: 2
CBD71405P04: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-115-1949
Pivot Arm

151151949
560-5200-154: RNCC: 3 | RNVC: 2
82-00765: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-177-5040
Piastra Di Arresto

151775040
521EE: RNCC: 3 | RNVC: 2
70-80-702: RNCC: 5 | RNVC: 2
521EE: RNCC: 5 | RNVC: 2

17 Apr 2004

5340-15-190-9306
Anello

151909306
999-4-01342-019: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-049-6603
Squadra

150496603
AB725-091-45: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-199-5600
Anchor Strap

151995600
19406022: RNCC: 3 | RNVC: 2
(241)A451719406022: RNCC: 5 | RNVC: 2

27 Apr 2005

5340-15-213-8625
Calotta In Lamiera

152138625
2230FZA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-108-1090
Stuetze

151081090
F405G7-15: RNCC: 3 | RNVC: 2
F405G7-15: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-060-0159
Base Shock Mount

150600159
C15664-1: RNCC: 3 | RNVC: 2
C15664-1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-121-2651
Pannello Di Chiusur

151212651
999-0500-85-327: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-147-9712
Structual Angle

151479712
205-0950-16-11: RNCC: 3 | RNVC: 2

28 May 1998

5340-15-052-0181
Morsetto Serratubi

150520181
M740-20-12: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-009-5824
Helical Compression Spring Seat

150095824
75245811: RNCC: 3 | RNVC: 2
9915444: RNCC: 5 | RNVC: 2
75245811: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-213-8606
Cerniera Ottonata I

152138606
CERNIERAOTTONATA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-6787
Coperchio Scatola P

151206787
D0491796: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-120-6848
Piastra Anteriore D

151206848
D0484712: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-102-1619
Fi Testa Di Tirante

151021619
3121/A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-176-5912
Molla A Gas

151765912
0876AAG006: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-109-4874
Double Angle Bracket

151094874
1Z 585518: RNCC: 3 | RNVC: 2
1Z 585518: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-105-8494
Double Angle Bracket

151058494
9910908: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-215-3465
Scatola Da Esterno

152153465
30X22X12: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-108-1759
Corrosion Preventive Anode

151081759
CRM1-200X70X30CONPIATTINA: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-111-4660
Blocchetto Completo

151114660
C7260-W12-B1: RNCC: 3 | RNVC: 2
C7260-W12-B1: RNCC: 5 | RNVC: 2
C7260-W12-B1: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-15-205-3051

5340-15-178-9488
Turnbuckle

151789488
13072000160: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-193-9604
Protection

151939604
109-0881-12-113: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-15-105-1184
Porta Pomello

151051184
1500/IC/III-08.09.58-14: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-154-3393
Riscontro Per Serra

151543393
206-1015-33-1: RNCC: 3 | RNVC: 2

4 May 2001

5340-15-106-7332
Tubazioni Co Staffa

151067332
981018: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-064-3485
Hook

150643485
42X119P003: RNCC: 3 | RNVC: 2

9 Jul 1984

5340-15-155-8877
Sostegno Elastico

151558877
MG-DNP-90: RNCC: 3 | RNVC: 2

13 Sep 2002

5340-15-153-4101
Elettro-Me Raccordo

151534101
5176-234-00: RNCC: 3 | RNVC: 2

11 Jan 2001

5340-15-115-1954
Adjuster Extra Fuel

151151954
904-2381-015: RNCC: 3 | RNVC: 2
82-00770: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-100-3974
Anello Di Bloccaggi

151003974
3522 290 08640: RNCC: 3 | RNVC: 2

27 Oct 1986

5340-15-214-2836
Tassello Fischer

152142836
SB9L4: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-103-8536
Staffa

151038536
7169409: RNCC: 3 | RNVC: 2
(7001)5340151038536: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-111-4413
Dust And Moisture Seal Protective Cap-Plug

151114413
MS90376-16Y: RNCC: 3 | RNVC: 2

6 Dec 1990

5340-15-102-8081
Testa Di Tirante Fi

151028081
232A3022-401: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-203-8718
Utility Resilient Mount

152038718
HD-45-360: RNCC: 3 | RNVC: 2

12 Jul 2011

5340-15-206-5901
Utility Resilient Mount

152065901
VDM-HH11-401M2: RNCC: 3 | RNVC: 2
(241)A4997VDM-HH11-401M2: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-054-5619
Turnbuckle

150545619
AF107-05E44: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-195-7714
Lidfoam

151957714
109-3901-07-133: RNCC: 3 | RNVC: 2

9 May 2011

5340-15-186-3760
Staffa Esterna

151863760
FIR-BK30107: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-110-8007
Cerniera

151108007
92638-107A00: RNCC: 3 | RNVC: 2
92638-107: RNCC: 5 | RNVC: 2

29 Jul 1990

5340-15-060-8238
Rim Clen Clamp (1)

150608238
000200186600: RNCC: 5 | RNVC: 2
000200186600: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-005-6429
Anello Speciale

150056429
0-15870: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-139-7703
Fissaggio Gaffetta

151397703
0047018: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-128-9306
Staffa

151289306
UM4081-3-4: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-8465
Bracket

151158465
245452G1: RNCC: 3 | RNVC: 2
71-02-005-012: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-068-5057
Fermo Porta

150685057
212-9010-76-1: RNCC: 3 | RNVC: 2

9 Dec 1985

5340-15-201-0109
Latch Pivot

152010109
3152027-00: RNCC: 3 | RNVC: 2

10 May 2006

5340-15-107-2122
Maniglia Assieme

151072122
140-0812/01: RNCC: 3 | RNVC: 2

30 May 1988

5340-15-149-3006
Struttura Filtro Ar

151493006
4885251: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-100-5705
Speciale Pattino

151005705
D0485736: RNCC: 3 | RNVC: 2
485736: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-134-4820
Tampone

151344820
3985: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-160-9683
Lucchetto C.

151609683
F720179341: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-127-2289
Anello Elastico Di

151272289
1-34002-75: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-154-6226
Base (1) Per Sosteg

151546226
157619105: RNCC: 2 | RNVC: 3

31 Jul 2001

5340-15-141-6822
Cilindro Da Infilar

151416822
8200L60C30D30-5: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-188-3474
Utility Resilient Mount

151883474
30073266: RNCC: 3 | RNVC: 2
Z03.01.31.00: RNCC: 5 | RNVC: 2
5340PL0948865: RNCC: 6 | RNVC: 9

3 Sep 2009

5340-15-063-3912
Guarnizione Special

150633912
2.202.006: RNCC: 3 | RNVC: 2

7 Oct 1982

5340-15-113-2805
Supportocernieracom

151132805
13750-001A1: RNCC: 3 | RNVC: 2
13750-001A1: RNCC: 5 | RNVC: 9

30 May 1991

5340-15-138-5674
Staffa

151385674
7728433: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-166-5051
Fork Ass

151665051
433A1303407: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-068-2320
Anchor Strap

150682320
W011308: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-103-4389
Dust And Moisture Seal Protective Plug

151034389
8917901: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-153-7649
Staffa Per Tubazion

151537649
01100H118210: RNCC: 5 | RNVC: 2
01100H118210: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-157-6328
Control Rod

151576328
11030309: RNCC: 3 | RNVC: 2
(241)A977211030309: RNCC: 5 | RNVC: 2

9 Oct 2003

5340-15-206-7878
Assy Anchor Plate

152067878
4235090-00: RNCC: 3 | RNVC: 2

20 Jul 2012

5340-15-120-6179
Helical Compression Spring Seat

151206179
4780558: RNCC: 3 | RNVC: 2

30 Jun 1997

5340-15-008-9972
Attacco A Molla

150089972
206-8102-02-1: RNCC: 3 | RNVC: 2

11 Jun 1981

5340-15-162-0442
Rod End Bearing Ass

151620442
9AA5010A174-401: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-117-4875
Guida Vetro Scorrev

151174875
26191-001D00: RNCC: 3 | RNVC: 2

27 Oct 1993

5340-15-174-7623
Nastro Rame 28Mm

151747623
55210-43/135: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-120-1448
Eye Hook

151201448
377A4034-001: RNCC: 3 | RNVC: 2

16 Jan 1995

5340-15-006-6641
Case

150066641
647-02-01-00: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-139-7773
Chiavistello

151397773
1000236: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-213-8810
Perno E Piastra Inf

152138810
425AIBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-115-3315
Nylonrail

151153315
6SA SP.MM1,5 ERTALON BIANCO: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-152-3916
Piastra

151523916
4130306306: RNCC: 3 | RNVC: 2
0-117644: RNCC: 5 | RNVC: 2
4130306306: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-152-3444
Fissaggio

151523444
9505787: RNCC: 3 | RNVC: 2
0-119750: RNCC: 5 | RNVC: 2
9505787: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-120-3490
Double Angle Bracket

151203490
60146409: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-205-5284
Turnbuckle

152055284
71747798: RNCC: 3 | RNVC: 2
(241)A293071747798: RNCC: 5 | RNVC: 2

16 Mar 2012

5340-15-006-2735
Maniglia Speciale

150062735
0-33972: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-188-0847
Manual Control Lever

151880847
157611200: RNCC: 3 | RNVC: 2

2 Jul 2009

5340-15-115-4780
Dust And Moisture Seal Protective Cap

151154780
R3-00-13: RNCC: 3 | RNVC: 2
R3-00-13: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-119-7675
Synchro Clamp

151197675
TN4-0023-031-02: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-136-7156
Sleeve

151367156
80-011P8D1-0: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-151-5453
Collare

151515453
008193852: RNCC: 3 | RNVC: 2
(241)A39630-116741: RNCC: 5 | RNVC: 2
0-116741: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-066-1312
Door

150661312
P-884086-001: RNCC: 3 | RNVC: 2
P884086-001: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-152-1532
Supporto Completo

151521532
99480894: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-15-184-5014
Spessore

151845014
2101-7083: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-166-4952
Tappo

151664952
369D260363: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-0425
Portello Laterale

151180425
D0484647: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-180-8422
Right Frontcover

151808422
RP247547: RNCC: 3 | RNVC: 2
(241)S3514RP247547: RNCC: 5 | RNVC: 2
RP247547: RNCC: 5 | RNVC: 9

28 Jul 2008

5340-15-117-7137
Helical Compression Spring Seat

151177137
1Z 591105: RNCC: 3 | RNVC: 2
1Z 591105: RNCC: 5 | RNVC: 9

17 Jan 1995

5340-15-218-9282
Strap

152189282
767-1940-001: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-220-0664
Telaio Fin. Angolar

152200664
S1-143H: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-112-8006
Turnbuckle

151128006
352A1077-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-148-5803
Assieme Semicernier

151485803
129-0340-40-101: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-100-8104
Semicerniera

151008104
109-0640-52-123: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-007-0845
Asta Speciale

150070845
0-11918: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-218-5888
Ancora A Scatto Am

152185888
TGS760: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-105-8942
Tirante A Teste Fil

151058942
9918662: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-2826
Supporto Aggancio D

151182826
D0485481: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-065-3198
Dispositivo Di Bloc

150653198
P-894876-401: RNCC: 3 | RNVC: 2
P894876-401: RNCC: 5 | RNVC: 2

19 Feb 1985

5340-15-052-2032
Control Rod

150522032
506-21-08: RNCC: 3 | RNVC: 2

4 Oct 1971

5340-15-149-4538
Spacing Threaded Standoff

151494538
1086.004-01: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-15-127-4871
Tirante Fiss. Batte

151274871
855943: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-114-0238
Guida Prolungabile

151140238
9299136: RNCC: 3 | RNVC: 2

15 Apr 1992

5340-15-068-2300
Anchor Strap

150682300
W011588: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-156-3357
Trasportatore

151563357
(241)A3460CBD71222P01: RNCC: 3 | RNVC: 2
CBD71222P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-151-5060
Tappo Speciale

151515060
GDM3011: RNCC: 3 | RNVC: 2

1 Jun 2000

5340-15-112-2875
Fermo Speciale

151122875
218A1033-001: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-118-4614
Resilient Mount

151184614
AVAUD908L-E: RNCC: 3 | RNVC: 2

6 Feb 1995

5340-15-114-5309
Dust And Moisture Seal Protective Cap-Plug

151145309
MS90376-8R: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-15-063-8955
Ammortizzatore Di E

150638955
553802010000: RNCC: 2 | RNVC: 3
538-02-0100: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-213-8859
Paletto Quadro Da S

152138859
8IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-112-6059
Hook Safety

151126059
GA103: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-180-9160
Half-Hinge

151809160
N925G9220201: RNCC: 3 | RNVC: 2

7 Aug 2008

5340-15-000-9125
Rotary Cover

150009125
HLTG00400A: RNCC: 3 | RNVC: 2

29 Apr 2013

5340-15-179-1900
Manual Control Handle

151791900
VKIC20REP2: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-188-9262
Speciale Inserto

151889262
109-0342-79-129: RNCC: 3 | RNVC: 2

16 Dec 2009

5340-15-122-1395
Covering Sa

151221395
A-39175-001: RNCC: 3 | RNVC: 2
A39175-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-166-5071
Bracket

151665071
44116001: RNCC: 3 | RNVC: 2
44116001: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-122-1365
Plate Perfo

151221365
A-39575-001: RNCC: 3 | RNVC: 2
A39575-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-055-2961
Turnbuckle

150552961
IA8UNI2018X15CNI808-4047: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-220-0531
Trave Collegamento

152200531
S1-137A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-007-3745
Cappuccio Speciale

150073745
0-34038: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-209-5265
Catenaccio Mm 400 I

152095265
1534.51.002: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-103-4645
Control Rod

151034645
VMD 3: RNCC: 3 | RNVC: 2

12 Apr 1988

5340-15-215-5508
Magnetic Impact Soc

152155508
MTS777: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-166-4972
Pivot

151664972
8X70645UNI171088: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-062-4002
Resilient Mount

150624002
896535: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-200-8881
Shock Mount Pad

152008881
9731000043: RNCC: 3 | RNVC: 2
(241)A60209731000043: RNCC: 5 | RNVC: 2

26 Mar 2006

5340-15-055-6605
Staffa Anteriore Si

150556605
546209: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-206-8174
Angle Bracket

152068174
50042 3783: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-204-4987
Handle

152044987
42563857: RNCC: 3 | RNVC: 2
7119383: RNCC: 5 | RNVC: 2
CV181745A: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-105-8270
Tampone Ammortizzat

151058270
8984035: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-148-9207
Tampone Posteriore

151489207
00266: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-15-115-7041
Bosta Portaguarnizi

151157041
D1401048: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-107-5715
Speciale Supporto

151075715
DE013.13.379: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.379: RNCC: 5 | RNVC: 2

5 Jan 1989

5340-15-107-2194
Supporto Graduato

151072194
306841G1: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-136-1701
Gancio

151361701
MSP114-02: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-177-5367
Manual Control Handle

151775367
Q25-F1S-3X121/M1/R2-F3D: RNCC: 3 | RNVC: 2

17 Apr 2004

5340-15-020-2492
Dust And Moisture Seal Protective Plug

150202492
01-097-01-7: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-232-9223
Impugnatura Grande

152329223
3920-10001: RNCC: 3 | RNVC: 2
534015E119319: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-179-0461
Door Handle Assy

151790461
042990-01-01: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-15-154-0967
Tampone Di Fine Cor

151540967
0-156764: RNCC: 3 | RNVC: 2
00156764: RNCC: 3 | RNVC: 2
(241)A39630-156764: RNCC: 5 | RNVC: 2
1PA39630-156764: RNCC: 5 | RNVC: 2

20 Mar 2001

5340-15-009-2605
Corpo Chiavistello

150092605
P-882577-003: RNCC: 3 | RNVC: 2

20 Aug 1980

5340-15-107-6092
Double Angle Bracket

151076092
A72327-01-20: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-210-9070
Stop Ad Espansione

152109070
STOP: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-162-2903
Board Extraction To

151622903
390-0915/01: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-175-6063
Serratura Cisa Art

151756063
ART. 45110/60: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-132-8247
Tasselli Di Plastic

151328247
3638-10: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-060-4792
Access Cover Plate

150604792
1376-31-553: RNCC: 3 | RNVC: 2
137631553: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-196-6301
Padlock

151966301
PN UAS 00043094: RNCC: 3 | RNVC: 2
5340F76036116: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-141-6821
Cilindro Da Infilar

151416821
8200L56C28D28-5: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-067-2625
Guarnizione

150672625
A02-1221-106-2: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-144-8209
Anello Di Spinta

151448209
88063-2046: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-200-1881
Snap Hook

152001881
392-014-002: RNCC: 3 | RNVC: 2

20 Oct 2005

5340-15-152-3488
Tirante

151523488
00153333: RNCC: 3 | RNVC: 2
0-153333: RNCC: 3 | RNVC: 2
(241)A39630-153333: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-199-5404
Chiusra A Levetta

151995404
ART.3007: RNCC: 3 | RNVC: 2

17 Apr 2005

5340-15-147-5196
Sede Valvola Di Con

151475196
31392-001: RNCC: 5 | RNVC: 2
31392-001: RNCC: 5 | RNVC: 9
31392-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-065-3907
Rubber Bumper

150653907
1076-06-116: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-009-3990
Ammortizzatore

150093990
741311-1A: RNCC: 3 | RNVC: 2

22 Jun 1981

5340-15-006-8963
Control Rod

150068963
39X501-12-33: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-105-6016
Staffa A Gomito

151056016
4554484: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-153-9315
Forcella Testa Di T

151539315
142018226: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-102-3239
Lock Attaching Part

151023239
SF260-17-30-11: RNCC: 3 | RNVC: 2
SF260-17-30-11: RNCC: 5 | RNVC: 9

19 Jul 1988

5340-15-151-7050
Cavallotto

151517050
0-102171: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-231-5992
Staffa

152315992
0-115048: RNCC: 3 | RNVC: 2
534015E086208: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-127-4482
Anello

151274482
1740-16-020: RNCC: 3 | RNVC: 2
1740-16-020: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-045-2247
Control Rod

150452247
506-22-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-105-1756
Padlock

151051756
140/I.(2/21304 13.06.69)01: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-4389
Turnbuckle

150744389
2C8UNI20200T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-115-8689
Slide Rear

151158689
273665P4: RNCC: 3 | RNVC: 2
71-02-023-006: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-055-6666
Mensola Anteriore S

150556666
543714: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-209-6272
Interfaccia Acciaio

152096272
0-40: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-105-5971
Staffa A Gomito

151055971
4549475: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-111-5747
Adapter Cou

151115747
AC120570-1/1-15: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-057-4381
Asta Di Fissaggio C

150574381
204-075-161-1001: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-106-9260
Moschettone E Magli

151069260
78786: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-006-2646
Anello Speciale

150062646
0-31174: RNCC: 3 | RNVC: 2
0-55927: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-067-9565
Handwheel

150679565
22.166: RNCC: 3 | RNVC: 2
22.166: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-125-1302
Lucchetto Monoblocc

151251302
22010-40: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-174-7334
Padlock

151747334
825-4021-004: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-188-2225
Staffa

151882225
142055220: RNCC: 3 | RNVC: 2
(241)A0199142055220: RNCC: 5 | RNVC: 2

7 Aug 2009

5340-15-152-8162
Sostegno Elastico

151528162
P200104: RNCC: 3 | RNVC: 2

27 Oct 2000

5340-15-058-4026
Threaded End Tensioning Tie Rod

150584026
553822107000: RNCC: 2 | RNVC: 3
3Q003-10: RNCC: 3 | RNVC: 2
538-22-1070: RNCC: 5 | RNVC: 2

1 Jun 1987

5340-15-177-3785
Manual Control Lever

151773785
030352: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-232-2851
Plate

152322851
9009.3003-1: RNCC: 3 | RNVC: 2
534015E116367: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-147-3102
Sleeve

151473102
2540 SERIES B: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-052-0017
Morsetto Serratubi

150520017
B740-20-22: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-8017
Flangia

151208017
129-0041-09-101: RNCC: 3 | RNVC: 2

7 Aug 1995

5340-15-121-4691
Turnbuckle

151214691
834727-10: RNCC: 3 | RNVC: 2
834727-10: RNCC: 5 | RNVC: 9

21 Dec 1995

5340-15-007-3318
Access Cover Plate

150073318
1276-19-277: RNCC: 3 | RNVC: 2
127619277: RNCC: 5 | RNVC: 2

6 Jul 2000

5340-15-121-7212
Double Angle Bracket

151217212
6100-30: RNCC: 3 | RNVC: 2
6100-30: RNCC: 5 | RNVC: 9

6 Feb 1996

5340-15-042-0746
Supporto Ammortizza

150420746
N3812-306: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-189-5293
Gambo Filettato

151895293
850092-103: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-116-0948
Assieme Blocchetto

151160948
68-103145-407: RNCC: 3 | RNVC: 2

4 Mar 1993

5340-15-170-3911
Ventil Box Assembly

151703911
109-0711-64-101: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-045-2921
Fascetta

150452921
N0R2-505-06-6A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-5598
Accesss Door Hinge

151205598
109-0301-16-117: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-178-9927
Support Assembly

151789927
RS 404 709 -X: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-153-9343
Base (1) Per Sosteg

151539343
142041250: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-109-8494
Supporto Albero

151098494
210304/3: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-155-8044
Cappuccio Di Protez

151558044
45WD925: RNCC: 3 | RNVC: 2

4 Jul 2002

5340-15-156-3673
Lock Upper Support

151563673
(241)A3460CBD71405P05: RNCC: 3 | RNVC: 2
CBD71405P05: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-156-3329
Removal Drift Assy

151563329
(241)A3460CBD71221G01: RNCC: 3 | RNVC: 2
CBD71221G01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-115-7114
Disco Metallico Inf

151157114
D0470360: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-219-5868
Maniglia Metallica

152195868
MANIGLIA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-109-1245
Rubber Bumper

151091245
38557658: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-162-1276
Plate-Retaining

151621276
NN71735P01: RNCC: 3 | RNVC: 2

2 Mar 2001

5340-15-162-7293
Threaded Plug

151627293
4824539: RNCC: 3 | RNVC: 2

23 Jan 2002

5340-15-102-4684
Dust And Moisture Seal Protective Plug

151024684
01-261-10-903: RNCC: 3 | RNVC: 2

30 Apr 1987

5340-15-194-2538
Covering Plate

151942538
101-520656-103: RNCC: 3 | RNVC: 2
(241)A0126101-520656-103: RNCC: 5 | RNVC: 2

20 Oct 2010

5340-15-009-1795
Semicollare

150091795
109-0600-41-1: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-063-8102
Nut And Bolt Locking Plate

150638102
1/41988/11: RNCC: 3 | RNVC: 2

31 Mar 1982

5340-15-195-4090
Kit Cinghie Di Sicu

151954090
200800007.15600: RNCC: 3 | RNVC: 2
(241)A6114200800007.15600: RNCC: 5 | RNVC: 2

21 Mar 2011

5340-15-155-4979
Lateral Plate

151554979
CBD70794P07: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-149-3181
Supporto Per Pompa

151493181
4886374: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-166-5231
Bracket

151665231
352A3132001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-074-4096
Turnbuckle

150744096
1C6UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-205-4948
Dust And Moisture Seal Protective Cap-Plug

152054948
182702108: RNCC: 3 | RNVC: 2
(241)A0199182702108: RNCC: 5 | RNVC: 2

14 Mar 2012

5340-15-193-9966
Speciale Supporto

151939966
109-0325-70-101: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-045-2279
Control Rod

150452279
N0R5-220-00-14-255: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-158-1594
Hinge Assy

151581594
J52850200-410: RNCC: 3 | RNVC: 2

17 Dec 2003

5340-15-151-9831
Staffa

151519831
0-153323: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-137-1393
Protezione

151371393
47-670-056-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-0865
Control Rod

151180865
D0467937: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-152-7935
Sostegno Elastico

151527935
P140806: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-155-4946
Support

151554946
CBD71130P06: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-189-0932
Base Antivibrante

151890932
195539103: RNCC: 3 | RNVC: 2
(241)A0199195539103: RNCC: 5 | RNVC: 2

27 Jan 2010

5340-15-116-6212
Dust And Moisture Seal Protective Plug

151166212
DPR 23424/1-19: RNCC: 3 | RNVC: 2

20 Nov 1993

5340-15-154-0375
Dispositivo Di Fiss

151540375
0-113896: RNCC: 3 | RNVC: 2
1PA39630-113896: RNCC: 5 | RNVC: 2
(241)A39630-113896: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-101-6854
Handle Locking

151016854
VH153/44/P-M10X25: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-151-5400
Piastra

151515400
0-119147: RNCC: 3 | RNVC: 2
(241)A39630-119147: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-009-3991
Ammortizzatore

150093991
741311-1B: RNCC: 3 | RNVC: 2

22 Jun 1981

5340-15-143-7091
Sede

151437091
2139289: RNCC: 3 | RNVC: 2
82139289: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-148-7507
Assieme Tappo Speci

151487507
2104-0047-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-163-4569
Block Fairlead Section

151634569
10C-024-101: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-110-5234
Screwed Plug

151105234
461.174: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-181-4224
Passacavi

151814224
357327-1: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-104-9896
Rotella Orientabile

151049896
V366: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-127-6018
Blocchetto Filettat

151276018
991473: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-203-8486
Riduzione

152038486
NIDOP0024: RNCC: 3 | RNVC: 2
(241)A4114NIDOP0024: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-166-5132
Serratura Mm 80 Per

151665132
SRTINFMTMM80: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-126-4931
Molla

151264931
TTA66: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-141-6853
Ammortizzatore

151416853
A15XF3F3: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-213-8266
Carrello Scorrevole

152138266
21-F101: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-059-7259
Helical Compression Spring Retainer

150597259
05114-101A1: RNCC: 3 | RNVC: 2

19 Jun 1976

5340-15-193-9635
Crashwor Metal Ring

151939635
109-0614-53-101: RNCC: 3 | RNVC: 2

5 Aug 2010

5340-15-059-7433
Resilient Mount

150597433
TG1-0001-003-23: RNCC: 3 | RNVC: 2

30 May 1975

5340-15-002-3685
Paracolpo In Strisc

150023685
369-09070-119: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-15-059-5392
Resilient Mount

150595392
1127-11-682: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-175-1451
Base Plate

151751451
10C-022REF201: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-110-7946
Seat Pipe Support

151107946
62289-002A00: RNCC: 3 | RNVC: 2
62289-002: RNCC: 5 | RNVC: 2

29 Jul 1990

5340-15-170-8057
Piastra Interfaccia

151708057
141-2893/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-112-7908
Resilient Mount

151127908
V1135-02: RNCC: 3 | RNVC: 2
V1135-02: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-128-5335
Distanziale

151285335
13325: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-006-2554
Guida Speciale

150062554
0-33761: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-068-4883
Anchor Strap

150684883
2882-4: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-062-8966
Staffetta Speciale

150628966
0-56001: RNCC: 3 | RNVC: 2

11 Mar 1982

5340-15-117-0268
Clevis And U-Bolt

151170268
533.17084.2: RNCC: 3 | RNVC: 2
533.17084.2: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-15-103-1912
Piastrina

151031912
DE013.12.909: RNCC: 3 | RNVC: 2
(241)A5015DE013.12.909: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-066-0211
Serratura

150660211
FM10: RNCC: 3 | RNVC: 2

28 Jan 1986

5340-15-102-8055
Supporto Perno

151028055
263A1603-003: RNCC: 3 | RNVC: 2

27 Oct 1989

5340-15-059-1618
Resilient Mount

150591618
160-0137-01A: RNCC: 3 | RNVC: 2

19 Jun 1974

5340-15-148-9482
Bracket

151489482
P120080-001: RNCC: 3 | RNVC: 2
P-120080-001: RNCC: 3 | RNVC: 2

9 Nov 1998

5340-15-121-6571
Centreur

151216571
800051669: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-104-8866
Fissaggio Gaffetta

151048866
4-678: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-051-3639
Forchetta

150513639
9913213: RNCC: 3 | RNVC: 2
9913213: RNCC: 5 | RNVC: 2

1 Jan 1974

Load More Results