What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 60 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 60 of 72

5340-15-231-2599
Tassello Elastico D

152312599
1318571080: RNCC: 3 | RNVC: 2
534015E155641: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-163-2286
Plug

151632286
99434233: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-149-0230
Tassello Antivibran

151490230
8111211: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-074-4217
Turnbuckle

150744217
1C22UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-107-4350
Flexible Surface Mechanical Patch

151074350
45180005: RNCC: 3 | RNVC: 2
45180005: RNCC: 5 | RNVC: 9

1 Apr 1998

5340-15-119-9655
Threaded End Tensioning Tie Rod

151199655
73433F02: RNCC: 3 | RNVC: 2
73433F02: RNCC: 5 | RNVC: 9

22 May 1996

5340-15-005-5097
Dust And Moisture Seal Protective Cap-Plug

150055097
4381657: RNCC: 3 | RNVC: 2
4381657: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-119-9651
Helical Compression Spring Retainer

151199651
73385F01: RNCC: 3 | RNVC: 2
73385F01: RNCC: 5 | RNVC: 9

22 May 1996

5340-15-186-1045
Asta Di Fissaggio A

151861045
01840105: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-170-7277
Air Out Assy

151707277
839-3010-T007: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-202-3340
Tappo Otturatore A

152023340
16988801: RNCC: 3 | RNVC: 2
(241)A424916988801: RNCC: 5 | RNVC: 2

28 Feb 2007

5340-15-068-2864
Serie Guarnizioni S

150682864
1.203.098A: RNCC: 3 | RNVC: 2
12030098 A: RNCC: 5 | RNVC: 2

4 Jun 1985

5340-15-181-4221
Inserto

151814221
354535-1: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-203-1880
Hinge

152031880
P75TC925A41-001: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-162-6323
Shock Absorber

151626323
MPSE-3: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-15-174-7090
Distance Piece

151747090
14115: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-074-4017
Turnbuckle

150744017
1A33UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-127-6686
Anello Elastico Rit

151276686
882323: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-139-4020
Tirante

151394020
4538868: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-220-5722
Gancio Expo Per Pan

152205722
GANCIOEXPO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-112-7501
Collar

151127501
27602471005: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-153-5013
Half Hinge

151535013
J57140699-002: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-204-8217
Kit Meccanico Altop

152048217
KIT/ALT.1147: RNCC: 3 | RNVC: 2
(241)A3028KIT/ALT.1147: RNCC: 5 | RNVC: 2

12 Jan 2012

5340-15-136-2839
Cerniera

151362839
8459023: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-071-4849
Ammortizzatore

150714849
310SIMPA: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-127-5398
Distanziale Leva At

151275398
880612: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-181-0709
F0rward Half-Hinge

151810709
N925G1514201: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-15-166-4988
Honge Lh

151664988
214A2028023: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-055-1095
Morsetto Serracavo

150551095
50503-5: RNCC: 3 | RNVC: 2

5 May 1972

5340-15-125-0224
Zanca Telescapica C

151250224
Z356: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-206-7957
Dust And Moisture Seal Protective Plug

152067957
16985401: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-178-9876
Plate

151789876
RS 201 283: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-153-1048
Morsetto Cbd

151531048
E0117G175: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-15-230-7190
Nursing Nipple Protecting Cap

152307190
2145.060: RNCC: 3 | RNVC: 2
534015E150317: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-219-9604
Cremonese In Ottone

152199604
4.2510: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-108-7173
Helical Compression Spring Seat

151087173
60153796: RNCC: 3 | RNVC: 2

24 Feb 1989

5340-15-020-3856
Golfare Occhio

150203856
02-231E22: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-6300
Access Door

151096300
002919: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-116-2329
Squadra Speciale

151162329
190530170: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-15-202-0123
Access Door

152020123
PORTA0005: RNCC: 3 | RNVC: 2
(241)A4114PORTA0005: RNCC: 5 | RNVC: 2

24 Jan 2007

5340-15-202-9683
Hand Grip

152029683
J92740450-003: RNCC: 3 | RNVC: 2

10 Oct 2007

5340-15-066-3253
Plug

150663253
AT19994-300: RNCC: 3 | RNVC: 2

23 May 1986

5340-15-102-4842
Maniglia Zigrinata

151024842
01-261-03-129: RNCC: 3 | RNVC: 2

31 Mar 1987

5340-15-057-6855
Tacchetto Ammortizz

150576855
98854-0100: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-218-2276
Fustella A Cavallot

152182276
ALFA524MM16: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-218-3914
Cerniera A Saldare

152183914
CM8: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-205-9442
Supporto A Sella Tu

152059442
00D15700: RNCC: 3 | RNVC: 2
(241)A010600D15700: RNCC: 5 | RNVC: 2

20 Apr 2012

5340-15-108-3621
Chiusura A Ginocchi

151083621
93919529: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-234-0422
Chiusura A Ginocchi

152340422
534015E064863: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-185-7026
Terminating Tool 8

151857026
32316520: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-020-3836
Gancio A Gremaglier

150203836
02-231E12-7-8: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-154-1766
Ingranaggio

151541766
130333-1: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-170-7020
Coppia Tamponi Post

151707020
00468: RNCC: 3 | RNVC: 2
(241)A488300468: RNCC: 5 | RNVC: 2

5 Jun 2003

5340-15-001-8031
Angle Bracket

150018031
500402696: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-153-3163
Grooved Clamp Coupling

151533163
122649239: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-105-6041
Staffa A Gomito

151056041
10283: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-149-0610
Tampone Ammortizzat

151490610
970410: RNCC: 3 | RNVC: 2
(241)A3593970410: RNCC: 5 | RNVC: 2

23 Nov 1998

5340-15-061-2048
Forcella Speciale

150612048
P79D620: RNCC: 3 | RNVC: 2
P79D620: RNCC: 5 | RNVC: 9

17 Oct 1977

5340-15-122-5572
Hydr Plate

151225572
01TL21166: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-127-4801
Staffetta Fissaggio

151274801
852411: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-100-5474
Coperchio Per Serba

151005474
10023: RNCC: 3 | RNVC: 2

28 Aug 1983

5340-15-170-4488
Manual Control Handle

151704488
IAS100+X: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-118-3896
Double Angle Bracket

151183896
60160386: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-118-6967
Helical Compression Spring Retainer

151186967
73139661: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-141-7406
Control Rod

151417406
189499-018: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-219-4401
Cappucci Di Ricambi

152194401
0715660950: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-106-2552
Sostegno El Piastra

151062552
4641876: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-061-5601
Dust And Moisture Seal Protective Plug

150615601
1200096-15B000008: RNCC: 5 | RNVC: 2
000200085800: RNCC: 5 | RNVC: 2
000200085800: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-119-1220
Manual Control Handle

151191220
73115921: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-154-3576
Helical Compression Spring Seat

151543576
107120663001: RNCC: 3 | RNVC: 2

8 May 2001

5340-15-179-9568
Double Angle Bracket

151799568
00189547: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-199-7208
Helical Compression Spring Seat

151997208
4895074: RNCC: 3 | RNVC: 2
(241)A42494895074: RNCC: 5 | RNVC: 2

18 May 2005

5340-15-103-4093
Ball Stop

151034093
276983ART33: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-107-0098
Barretta Magnetica

151070098
807: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-181-3362
Adattatore Per Smon

151813362
504279068: RNCC: 3 | RNVC: 2
0000504279068: RNCC: 5 | RNVC: 2
(241)A4249504279068: RNCC: 5 | RNVC: 2

3 Dec 2008

5340-15-179-5171
Supporto Sottocofan

151795171
504240431: RNCC: 3 | RNVC: 2
(241)A4249504240431: RNCC: 5 | RNVC: 2

2 Mar 2007

5340-15-115-3018
Sopporto Destro Car

151153018
23.57.86.01: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-231-5608
Handwheel

152315608
2CHI00001: RNCC: 3 | RNVC: 2
534015E104990: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-193-6923
Reinforcement Plate

151936923
109-0691-11-107: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-15-232-2016
Clips Fermaremi

152322016
34.355.00: RNCC: 3 | RNVC: 2
534015E151337: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-134-0569
Escutcheon Plate

151340569
NEFF43201: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-149-3425
Resilient Mount

151493425
60161634: RNCC: 3 | RNVC: 2

2 Feb 1999

5340-15-148-5848
Assieme Piastrina

151485848
129-0360-06-101: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-060-9943
Rubbe Bumper Strip

150609943
109-0101-52-1: RNCC: 3 | RNVC: 2

22 Nov 1976

5340-15-191-2131
Chiudiporta M.A.B.

151912131
2MA1002: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-148-1706
Lock Key

151481706
LA2770-00572: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-153-9589
Forcella Testa Di T

151539589
8UNI1673: RNCC: 3 | RNVC: 2
230022540: RNCC: 5 | RNVC: 2

12 Mar 2001

5340-15-218-2535
Gancio Pannello For

152182535
B-03: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-147-0661
Piastra Di Montaggi

151470661
1861-1: RNCC: 3 | RNVC: 2
1861-1: RNCC: 5 | RNVC: 9

21 Aug 1997

5340-15-049-7526
Fascetta

150497526
AB47-706-214-14: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-170-8060
Manicotto Segnacavo

151708060
340-0542/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-074-4366
Turnbuckle

150744366
2C6UNI20200T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-109-5899
Morsettoabloccosezi

151095899
21360015A: RNCC: 3 | RNVC: 2

20 Jul 1988

5340-15-178-6289
Spacing Threaded Standoff

151786289
M737: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-181-1834
Sostegno Elastico

151811834
MF953: RNCC: 3 | RNVC: 2
(241)A0866MF953: RNCC: 5 | RNVC: 2
(241)A4885MF953: RNCC: 5 | RNVC: 9
MF953: RNCC: 5 | RNVC: 9

12 Nov 2008

5340-15-108-5826
Threaded End Tensioning Tie Rod

151085826
M8X40UNI5917: RNCC: 2 | RNVC: 2
2128-67338: RNCC: 3 | RNVC: 2
212867338: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-147-8740
Selle

151478740
129445: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-156-6538
Dust And Moisture Seal Protective Plug

151566538
UMM1097: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-100-4689
Smorzatore A Farfal

151004689
H-160-267-110-135-8FF: RNCC: 3 | RNVC: 2

19 Feb 1987

5340-15-154-5960
Base (1) Per Sosteg

151545960
157602172: RNCC: 2 | RNVC: 3

26 Jul 2001

5340-15-107-4349
Rigid Surface Mechanical Patch

151074349
42020064: RNCC: 3 | RNVC: 2
42020064: RNCC: 5 | RNVC: 9

1 Apr 1998

5340-15-150-3395
Dust And Moisture Seal Protective Plug

151503395
13-10023-00: RNCC: 3 | RNVC: 2

29 Sep 1999

5340-15-151-7559
Fitting Assembly

151517559
J52850750-403: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-151-5319
Piastra

151515319
0-103473: RNCC: 3 | RNVC: 2
1PA39630-103473: RNCC: 5 | RNVC: 2
(241)A39630-103473: RNCC: 5 | RNVC: 2

6 Jun 2000

5340-15-152-3940
Flangia

151523940
40102630: RNCC: 3 | RNVC: 2
0-119841: RNCC: 5 | RNVC: 2
40102630: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-153-7670
Base (1) Per Sosteg

151537670
T0063646: RNCC: 5 | RNVC: 2
01830H10985A: RNCC: 5 | RNVC: 2
01830H10985A: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-100-9655
Coperchio Speciale

151009655
C49905: RNCC: 3 | RNVC: 2

2 Nov 1987

5340-15-166-4895
Vaschetta Per Panne

151664895
545V: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-201-4939
Hatch Actuator Atta

152014939
N523G5439102: RNCC: 3 | RNVC: 2
(241)A0126N523G5439102: RNCC: 5 | RNVC: 2

3 Oct 2006

5340-15-127-3211
Staffa Posteriore S

151273211
724931: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-230-2475
Tappo A Scodellino

152302475
D01800011A: RNCC: 3 | RNVC: 2
534015E123204: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-216-1760
Ganci X Attrezzi

152161760
4149: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-116-1910
Sp Pressore A Molla

151161910
190512122: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-15-112-8584
Pattino

151128584
466907: RNCC: 3 | RNVC: 2
D0466907: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-008-1759
Turnbuckle

150081759
4478664: RNCC: 3 | RNVC: 2
4478664: RNCC: 5 | RNVC: 9

29 Sep 1980

5340-15-187-5445
Spacing Threaded Standoff

151875445
E5453.0000: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-008-5420
Dispositivo Comando

150085420
4478659: RNCC: 3 | RNVC: 2
4478659: RNCC: 5 | RNVC: 9

29 Sep 1980

5340-15-212-6883
Graffetta Con Chiod

152126883
GRAFFETTAMM10: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-162-3247
Pull Knob

151623247
159136: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-103-2010
Puntone Di Appoggio

151032010
DE160.02.041: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-113-2374
Flangiacomplessivos

151132374
233A1045-405: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-008-0698
Eye Hook

150080698
60112951: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-119-4265
Fascetta Complessiv

151194265
142504020: RNCC: 3 | RNVC: 2

26 Jul 1994

5340-15-127-0715
Molla

151270715
339325: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-215-3181
Staffa Zincata Dopp

152153181
STAFFAZINCATA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-103-1083
Profilato

151031083
DE013.13.688: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-114-7577
Washer Spec

151147577
01TL20446: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-122-5564
Left Panel

151225564
01TL21027-03: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-188-2223
Staffa

151882223
142055218: RNCC: 3 | RNVC: 2
(241)A0199142055218: RNCC: 5 | RNVC: 2

7 Aug 2009

5340-15-174-7015
Dust And Moisture Seal Protective Cover

151747015
ECS34LC60: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-114-0228
Maniglia A Cinghia

151140228
00MB001-00MB002: RNCC: 3 | RNVC: 2

15 Apr 1992

5340-15-150-9293
Resilient Mount

151509293
051.000.00: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-15-192-6466
Inserto

151926466
AS6316-8: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-101-4135
Assieme Leva

151014135
1576-05-031: RNCC: 3 | RNVC: 2
157605031: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-175-5860
Braccio Snodabile S

151755860
75091455: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-106-5620
Pomello

151065620
1075 B.: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-156-4103
Piastra Di Fissaggi

151564103
190516308: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-204-3001
Bracket Assy

152043001
N635G1090101: RNCC: 3 | RNVC: 2
(241)A0126N635G1090101: RNCC: 5 | RNVC: 2

19 Oct 2011

5340-15-193-6492
Complessiv Cinghia

151936492
163110945: RNCC: 3 | RNVC: 2
163110945: RNCC: 5 | RNVC: 2
(241)A0199163110945: RNCC: 5 | RNVC: 2
5340PL1035206: RNCC: 6 | RNVC: 9

28 Jun 2010

5340-15-101-7449
Piastra Forata

151017449
P16: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-200-4558
Dust And Moisture Seal Protective Plug

152004558
V40513.00: RNCC: 3 | RNVC: 2
(241)A4447V40513.00: RNCC: 5 | RNVC: 2

23 Jan 2006

5340-15-150-5867
Struttura

151505867
A37700-02-08: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-125-3467
Tampone Gomma

151253467
7607086: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-127-6036
Molla

151276036
992756: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-117-2621
Threaded End Tensioning Tie Rod

151172621
132517110: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-103-0463
Rubber Bumper

151030463
591420: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-117-7294
Control Rod

151177294
142507908: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-109-5337
Nut And Bolt Locking Plate

151095337
DOR0113391: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-149-2486
Control Rod

151492486
122369/001: RNCC: 3 | RNVC: 2

5 Jan 1999

5340-15-005-2233
Clamp

150052233
649-411-850-0: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-062-5213
Manetta Compl

150625213
109-0506-03-3: RNCC: 3 | RNVC: 2

29 Apr 1982

5340-15-103-3066
Serratura Di Sicure

151033066
137SR-110-N001: RNCC: 3 | RNVC: 2

13 Dec 1988

5340-15-141-9223
Tappo

151419223
PL2564-16TAPPO: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-154-5539
Copriaccesso

151545539
J57158030-401: RNCC: 3 | RNVC: 2

12 Jul 2001

5340-15-154-5012
Connettore Testa Di

151545012
1P 548278LA: RNCC: 3 | RNVC: 2
1P 548278LA: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-149-2978
Convogliatore Aria

151492978
4882739: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-150-6024
Double Angle Bracket

151506024
106136: RNCC: 3 | RNVC: 2

6 Dec 1999

5340-15-188-6315
Sealing Plug Assembly

151886315
16990370: RNCC: 3 | RNVC: 2
(241)A424916990370: RNCC: 5 | RNVC: 2

19 Oct 2009

5340-15-210-3168
Ruota Monolitica In

152103168
681103: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-005-3736
Turnbuckle

150053736
1376659: RNCC: 3 | RNVC: 2
1376659: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-156-1164
Dust And Moisture Seal Protective Cap

151561164
155807-1: RNCC: 3 | RNVC: 2

22 Nov 2002

5340-15-105-8167
Sostegno Elastico

151058167
503-03-5005: RNCC: 5 | RNVC: 2
503-03-5005: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-064-9432
Targa

150649432
700721/E: RNCC: 3 | RNVC: 2

28 Aug 1979

5340-15-233-3893
Serratura Chiusura

152333893
R 27161-1: RNCC: 3 | RNVC: 2
534015E114117: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-006-0141
Anchor Strap

150060141
B512TL161: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-221-6979
Lucchetto Antiscass

152216979
5340RN0600152: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-220-6787
Lucchetto 162.30

152206787
162.30: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-166-5061
Plug

151665061
21823005: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-3809
Dust And Moisture Seal Protective Cap-Plug

151183809
60157177: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-124-1742
Calotta Colorata 18

151241742
31-901: RNCC: 3 | RNVC: 2
31-901: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-068-1351
Metal Runner

150681351
27456-001A2: RNCC: 3 | RNVC: 2

26 Mar 1986

5340-15-186-6076
Staffaggio Rapido

151866076
IROX B70/14: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-114-7450
Panel Front

151147450
AS301-991: RNCC: 3 | RNVC: 2
AS301-991: RNCC: 5 | RNVC: 2
AS301-991: RNCC: 5 | RNVC: 9

4 Aug 1992

5340-15-122-7051
Ass. Cerniera

151227051
X10869-403: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-136-5364
Mensola Per Condott

151365364
V200104: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-152-0134
Padlock

151520134
80839: RNCC: 3 | RNVC: 2
0-119619: RNCC: 5 | RNVC: 2
80839: RNCC: 5 | RNVC: 2

2 Aug 2000

5340-15-218-3537
Lente Piccole Cu220

152183537
LI2403/2CU220: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-154-0412
Staffa Speciale

151540412
0-164835: RNCC: 3 | RNVC: 2
1PA39630-164835: RNCC: 5 | RNVC: 2
(241)A39630-164835: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-215-6830
Piedino Regolabile

152156830
PROCDP1: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-067-2634
Fascetta

150672634
912327C1: RNCC: 2 | RNVC: 2

11 Feb 1986

5340-15-122-5154
Bracket Tra

151225154
01TL21610: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-204-3256
Telaio

152043256
0000500428468: RNCC: 3 | RNVC: 2
(241)A39630000500428468: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-203-0411
Piattello

152030411
033090136: RNCC: 3 | RNVC: 2
(241)A5009033090136: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-174-7696
Double Angle Bracket

151747696
1808GR93: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-110-3982
Sealing Plug Assembly

151103982
1136: RNCC: 3 | RNVC: 2
91359424: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-006-6121
Ring

150066121
505A111: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-109-6271
Cuffia Protezione F

151096271
002958: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-238-0402
Supporto A Parete M

152380402
MB50: RNCC: 3 | RNVC: 2
534015E143747: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-001-3165
Sliding Block

150013165
0000.808.081: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-152-9127
Staffa (1) Accessor

151529127
77791F92: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-209-6852
Supporti Per Estint

152096852
E.SUP140.V: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-103-1969
Molletta Per Tubi

151031969
DE013.13.442: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-066-6116
Helical Compression Spring Retainer

150666116
65133: RNCC: 2 | RNVC: 2
65133F01: RNCC: 3 | RNVC: 2

17 Feb 1993

5340-15-156-8087
Lock Clanging

151568087
94UJ04343196S01-405/409: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-15-217-6899
Cacciavite Taglio 5

152176899
99114500: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-163-4651
Pressure Plate

151634651
635C01100-005: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-103-2879
Angolare Co Mensola

151032879
109-0311-77-109: RNCC: 3 | RNVC: 2

29 Oct 1988

5340-15-136-3085
Staffa

151363085
4412694: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-154-1794
Albero Scanalato

151541794
130773-1: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-111-5836
Electrical-Me Post

151115836
23.55.52.00: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-116-9754
Water Inlet Bulk He

151169754
W018266: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-198-5113
Kit Maniglie

151985113
C30A0080B: RNCC: 3 | RNVC: 2
(241)SH469C30A0080B: RNCC: 5 | RNVC: 2

7 Oct 2004

5340-15-177-3827
Headless Straight Rod

151773827
032888: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-179-6789
Vehicular Seat Bracket

151796789
0000500411613: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-068-6415
Cover Plate Access

150686415
W 013856: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-187-4674
Angle Bracket

151874674
J28042159-001: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-15-231-0740
Escutcheon Plate

152310740
00403PMPN: RNCC: 3 | RNVC: 2
566015E158010: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-105-6318
Collare Serraggio

151056318
10418401: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-110-6679
Coperchio Accesso

151106679
1211-03-110: RNCC: 3 | RNVC: 2

15 Jan 1990

5340-15-068-0514
Caster Rigid

150680514
761-401: RNCC: 3 | RNVC: 2
2510040: RNCC: 5 | RNVC: 2

25 Feb 1986

5340-15-222-2279
Ang. Fissaggio 80X8

152222279
S1-110H: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-158-1593
Hinge Assy

151581593
J52850200-409: RNCC: 3 | RNVC: 2

17 Dec 2003

5340-15-143-5355
Telaio

151435355
542-151: RNCC: 3 | RNVC: 2
441: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-180-0987
Support

151800987
412-1105-11-117: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-006-6637
Flange

150066637
647-02-10-00: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-150-9541
Semicerniera

151509541
206-031-538-2103: RNCC: 3 | RNVC: 2

14 Feb 2000

5340-15-210-9531
Fascetta Serracavo

152109531
4/11664: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-006-5733
Supporto Maniglia

150065733
000200312000: RNCC: 5 | RNVC: 2
000200312000: RNCC: 5 | RNVC: 9

25 Sep 1979

5340-15-051-2808
Nut And Bolt Retainer

150512808
4547661: RNCC: 3 | RNVC: 2
4547661: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-103-1963
Speciale Cerniera

151031963
DE013.13.410: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.410: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-103-5741
Electrical-Me Post

151035741
RS412966AR: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-15-205-2714
Manual Control Lever

152052714
PMS96901332: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-117-8511
Bracket

151178511
SF260-12-214-01: RNCC: 3 | RNVC: 2
SF260-12-214-01: RNCC: 5 | RNVC: 9

28 Jan 1994

5340-15-207-1444
Squadretta Di Suppo

152071444
006A5462-001: RNCC: 3 | RNVC: 2
(241)A2142006A5462-001: RNCC: 5 | RNVC: 2

10 Sep 2012

5340-15-183-4953
Lucchetti Di Sicure

151834953
COMM631020060002: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-074-3674
Turnbuckle

150743674
2C27UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-118-0446
Portaboccola In Acc

151180446
D0486030: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-105-6030
Staffa A Gomito

151056030
8283222: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-126-4490
Molla A Spi.Acc.Per

151264490
14560-16: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-101-7410
Ammortizzatore Idro

151017410
1371CE/01/121: RNCC: 3 | RNVC: 2

14 Nov 1986

5340-15-148-9865
Rim Clen Clamp (1)

151489865
GL: RNCC: 3 | RNVC: 2

9 Nov 1998

5340-15-147-8706
Plate

151478706
518-10-1270: RNCC: 3 | RNVC: 2

18 May 1998

5340-15-179-8063
Filter Clamp

151798063
6-05-026: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-121-4340
Electrical-Me Post

151214340
553871111000: RNCC: 3 | RNVC: 2
538-71-1110: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-15-153-5021
Half Hinge

151535021
J57140701-002: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-178-2151
Spring Guide

151782151
3652-22: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-110-2201
Seat Pipe Support

151102201
62937-001A01: RNCC: 3 | RNVC: 2
62937-001A1: RNCC: 5 | RNVC: 2

9 Jul 1990

5340-15-156-4777
Dust And Moisture Seal Protective Plug

151564777
0-121367: RNCC: 3 | RNVC: 2
(241)A39630-121367: RNCC: 5 | RNVC: 2
1PA39630-121367: RNCC: 5 | RNVC: 2

13 Feb 2003

5340-15-001-3167
Lip Seal Protection

150013167
CTP68000G001: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-000-8608
Golfare

150008608
STN164267: RNCC: 3 | RNVC: 2

12 Apr 2013

5340-15-113-0571
Nut And Bolt Locking Plate

151130571
471849: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-148-7506
Sede Speciale

151487506
2104-0046-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-117-9152
Chiavistello Assiem

151179152
263A1867-401: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-074-4339
Turnbuckle

150744339
2B56UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4439
Turnbuckle

150744439
1C6UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-151-0677
Pomello Zigrinato

151510677
120005403: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-15-052-7106
Fermaglio

150527106
702258U: RNCC: 3 | RNVC: 2
T2H138: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-214-4848
Lucchetto A Stantuf

152144848
28550-54: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-207-4375
Utility Resilient Mount

152074375
2834-7: RNCC: 3 | RNVC: 2
ANG40 40P: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-062-8918
Fascetta Speciale

150628918
0-55736: RNCC: 3 | RNVC: 2
1PA39630-55736: RNCC: 5 | RNVC: 2

11 Mar 1982

5340-15-149-2916
Multiple Angle Bracket

151492916
4865342: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-074-4334
Turnbuckle

150744334
2B33UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4130
Turnbuckle

150744130
2C45UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-062-3516
Hinge

150623516
5005-25X22: RNCC: 3 | RNVC: 2

25 Jan 1982

5340-15-053-5976
Anello

150535976
94-04012-0: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-220-0695
Latch Assy (Post-Mo

152200695
263A1866-405: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-170-7397
Mount Anti-Vib.

151707397
62770-51/003: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-005-4059
Cover Plate Access

150054059
1137-19-142: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-236-3094
Cilindro Per Serrat

152363094
08310-06: RNCC: 3 | RNVC: 2

27 Aug 2007

5340-15-114-6028
Resilient Mount

151146028
V1135-01A: RNCC: 3 | RNVC: 2
V1135-01A: RNCC: 5 | RNVC: 2

23 Jun 1992

5340-15-001-7075
Nut And Bolt Retainer

150017075
8052962: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-181-6100
Fermo Regolabile Ca

151816100
119RIG079: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-177-7226
Deur Scharnier

151777226
0709 02381: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-109-1931
Helical Compression Spring Seat

151091931
7165208: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-154-4127
Manual Control Lever

151544127
10015170: RNCC: 3 | RNVC: 2
(241)A977210015170: RNCC: 5 | RNVC: 2

22 May 2001

5340-15-108-2115
Metal Runner

151082115
467141/B: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-202-4231
Antivibrante

152024231
VAF-3: RNCC: 3 | RNVC: 2
(241)A0841VAF-3: RNCC: 5 | RNVC: 2

15 Mar 2007

5340-15-118-4114
Bloccaggio Porta Po

151184114
60164375: RNCC: 3 | RNVC: 2

28 May 1994

5340-15-062-9160
Threaded End Tensioning Tie Rod

150629160
0-100240: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-207-3925
Angle Bracket

152073925
ED0064292180-S: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-139-5877
Tirante

151395877
9983679: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-156-3577
Dust Protective Cap

151563577
(241)A3460CBD71071P01: RNCC: 3 | RNVC: 2
CBD71071P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-139-5088
Tappo

151395088
79024188: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-212-2310
Chiave Per Allarme

152122310
EX5340RI4833772: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-219-8584
Disco A Strappo Dia

152198584
115 GR 40: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-119-7383
Guide Boss

151197383
01TL23344: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-207-0319
Centina

152070319
4-171/C: RNCC: 3 | RNVC: 2
(241)AF0514-171/C: RNCC: 5 | RNVC: 2

16 Aug 2012

5340-15-179-1617
Flange

151791617
RS 301 808: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-166-5036
Bracket

151665036
UA29004A04C: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-106-0831
Chiusura Ad Agganci

151060831
5086-03-15: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-110-2886
Bracket Fue

151102886
P120081-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-150-6357
Assieme Segnalatore

151506357
39689-002: RNCC: 5 | RNVC: 2
39689-002: RNCC: 5 | RNVC: 9

15 Dec 1999

5340-15-156-8088
Latch Hook

151568088
94UJ04343196S01-405/410: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-15-120-0703
Handle

151200703
P-893089-401: RNCC: 3 | RNVC: 2
P893089-401: RNCC: 5 | RNVC: 2

16 Dec 1994

5340-15-187-4628
Cardine Piano

151874628
347-8563: RNCC: 3 | RNVC: 2
(241)AA136347-8563: RNCC: 5 | RNVC: 2

2 Apr 2009

5340-15-151-7091
Staffa

151517091
0-177767: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-181-6098
Braccio Collegament

151816098
119RIG043: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-202-2318
Rod Assy

152022318
233A1003-415: RNCC: 3 | RNVC: 2
(241)A0019233A1003-415: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-15-205-8829
Sp Assieme Attacco

152058829
9AA4020A015-001: RNCC: 3 | RNVC: 2
(241)A21429AA4020A015-001: RNCC: 5 | RNVC: 2

12 Apr 2012

5340-15-116-1631
Attacco A Cerniera

151161631
67367-802D01: RNCC: 3 | RNVC: 2
67367-802D1: RNCC: 5 | RNVC: 2

17 Mar 1993

5340-15-151-9641
Staffa

151519641
0-174242: RNCC: 3 | RNVC: 2
1PA39630-174242: RNCC: 5 | RNVC: 2

27 Jul 2000

5340-15-231-6389
Tassello Elastico

152316389
0-10008: RNCC: 3 | RNVC: 2
534015E110302: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-104-8902
Fissaggio Gaffetta

151048902
6193-3616-58: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-6034
Staffa A Gomito

151056034
1/016118: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-100-5871
Pattino Laterale

151005871
D.O.A. 0119728: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-15-213-8858
Cremagliera X Cance

152138858
473IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-056-1932
Handwheel

150561932
1276-07-182: RNCC: 3 | RNVC: 2
127607182: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-126-7416
Handwheel

151267416
210781: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-000-7935
Anello

150007935
PAGE 12M: RNCC: 3 | RNVC: 2

11 Apr 2013

5340-15-116-8559
Cilindri T Flangia

151168559
D1402575: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-232-1237
Forcella

152321237
A.2877100: RNCC: 3 | RNVC: 2
534015E117000: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-213-4672
Graffa Fermo Per Na

152134672
MECKIND1/2': RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-193-2355
Angle Bracket

151932355
504164644: RNCC: 3 | RNVC: 2
(241)A4249504164644: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-15-001-7985
Dust And Moisture Seal Protective Cap

150017985
500436652: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-215-0476
Catenella

152150476
MM2: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-102-8905
Accesso Coperchio

151028905
1Q520855LA: RNCC: 3 | RNVC: 2
1Q520855LA: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-122-2098
Pointeau De 250

151222098
800025117: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-138-2755
Cinghia Completa

151382755
16529: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-001-8020
Angle Bracket

150018020
500403291: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-005-5326
Access Cover Plate

150055326
1026-01-137: RNCC: 3 | RNVC: 2
1026-01137: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-175-1469
Insert

151751469
23F-042REF203: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-055-6459
Turnbuckle

150556459
1304-3-102V: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-170-8151
Piastrina Di Copert

151708151
340-0761/03: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-107-1722
Right Hand Hinge

151071722
RS412162A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-109-9008
Sfera

151099008
568092: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-156-0596
Snap Hook

151560596
11HJ04143014S01-103/N: RNCC: 3 | RNVC: 2

19 Nov 2002

5340-15-174-7455
Piatto P Ot58pb 20X

151747455
53140-01/071: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-060-1853
Piastra Cerniera Sp

150601853
98911-501: RNCC: 3 | RNVC: 2

16 Dec 1976

5340-15-156-5763
Engine Accessory Bracket

151565763
4912653: RNCC: 3 | RNVC: 2

27 Feb 2003

5340-15-180-5339
Screw Thread Insert

151805339
999-5000-30-110: RNCC: 3 | RNVC: 2
(241)A0126999-5000-30-110: RNCC: 5 | RNVC: 2

16 Jun 2008

5340-15-066-4879
Sfera Speciale

150664879
T0085/R17: RNCC: 3 | RNVC: 2

1 Mar 1986

5340-15-078-0836
Morsetto

150780836
TM01-63-100: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-185-5850
Cilindro Sag. Mm59

151855850
NASELLOTONDO: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-186-8995
Sealing Plug Assembly

151868995
066725: RNCC: 3 | RNVC: 2
0028455: RNCC: 5 | RNVC: 2

5 Jan 2009

5340-15-180-0806
Dust And Moisture Seal Protective Cap

151800806
3AL79266AA**: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-178-9409
Manual Control Lever

151789409
MD003MD009AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-119-1117
Dust And Moisture Seal Protective Cap

151191117
71000817: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-107-4330
S Serie Guarnizioni

151074330
12032026: RNCC: 3 | RNVC: 2
12032026: RNCC: 5 | RNVC: 9

19 Jun 1988

5340-15-137-3286
Serratura Compl.

151373286
S6151-50606-23: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-220-0511
Lam. Elcom Sys Lg10

152200511
S1-145M: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-100-8100
Semicerniera

151008100
109-0640-52-119: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-122-3301
Gancio Di Chiusura

151223301
215A1025-001: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-147-5170
Contenitore Ossigen

151475170
42710-001: RNCC: 5 | RNVC: 2
42710-001: RNCC: 5 | RNVC: 9
42710-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-206-4757
Handle Lock

152064757
C7564-00: RNCC: 3 | RNVC: 2

13 Jun 2012

5340-15-163-5168
Headless Grooved Rod

151635168
915/10100: RNCC: 3 | RNVC: 2
(241)A6479915/10100: RNCC: 5 | RNVC: 2

9 Oct 2002

5340-15-198-6614
Corrosion Preventive Anode

151986614
DN200-DE216: RNCC: 3 | RNVC: 2

25 Oct 2004

5340-15-148-5806
Assieme Semicernier

151485806
129-0340-42-102: RNCC: 3 | RNVC: 2

31 Aug 1998

5340-15-121-5473
Turnbuckle Body

151215473
129-0110-39-109: RNCC: 3 | RNVC: 2

16 Jan 1996

5340-15-149-4012
Threaded Insert

151494012
2100-02509: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-100-8073
Ritegno Parabrezza

151008073
109-0310-27-31: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-112-7909
Resilient Mount

151127909
V1135-26: RNCC: 3 | RNVC: 2
V1135-26: RNCC: 8 | RNVC: 2

7 Sep 1989

5340-15-123-7798
Tassello 1A-3A-4A

151237798
4346857: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-126-4679
Molla

151264679
XS1695: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-187-0853
Fascetta Stringitub

151870853
179004347: RNCC: 3 | RNVC: 2
(241)A0199179004347: RNCC: 5 | RNVC: 2

10 Feb 2009

5340-15-149-2894
Maniglia Comando Ru

151492894
4861347: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-125-0918
Rubber Bumper

151250918
412-9000-44-107: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-220-0669
Telaio Porta U 200

152200669
S1-144C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-203-6697
Pulley Bracket

152036697
G2212735018-701: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-149-1053
Special Protezione

151491053
2302-0085-001: RNCC: 3 | RNVC: 2

1 Dec 1998

5340-15-157-9881
Reinforcement

151579881
J94344045-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-103-4136
Valve Seat

151034136
276397ART14: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-8527
Tassello Elastico

151038527
8584214: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-178-4987
Dust And Moisture Seal Protective Cap

151784987
308190: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-118-6559
Verrou

151186559
71004822: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-202-8249
Cap Dc Fuse

152028249
MPG 42 010 005: RNCC: 3 | RNVC: 2

18 Jul 2007

5340-15-154-1962
Piastra

151541962
0-164624: RNCC: 3 | RNVC: 2
(241)A39630-164624: RNCC: 5 | RNVC: 2
1PA39630-164624: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-005-0228
Dust And Moisture Seal Protective Cap

150050228
580051: RNCC: 3 | RNVC: 2
796-063-811: RNCC: 5 | RNVC: 2
796.063.811: RNCC: 5 | RNVC: 2

1 Mar 1985

5340-15-200-5852
Tassello

152005852
71420318: RNCC: 3 | RNVC: 2
(241)AD75171420318: RNCC: 5 | RNVC: 2
71420318: RNCC: 5 | RNVC: 2

1 Feb 2006

5340-15-139-9287
Collare Serraggio

151399287
J281RA: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-213-7426
Cilindro Iseo Da In

152137426
8209-30-40: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-116-9476
Panel

151169476
W020959: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-198-1999
Anello

151981999
55.1689: RNCC: 3 | RNVC: 2

24 Jun 2004

5340-15-178-7785
Dust And Moisture Seal Protective Plug

151787785
027060: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-063-6224
Cover Plate Access

150636224
4733150: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-116-4862
Double Angle Bracket

151164862
60151125: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-152-0507
Interface Bracket

151520507
8854 124-101: RNCC: 3 | RNVC: 2

3 Aug 2000

5340-15-186-5966
Debris Screen

151865966
4301-29: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-105-6321
Collare Serraggio

151056321
0-950037: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-149-9087
Manual Control Lever

151499087
D0R099074: RNCC: 3 | RNVC: 2

19 Jul 1999

5340-15-193-1585
Angle Bracket

151931585
504148879: RNCC: 3 | RNVC: 2
(241)A4249504148879: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-170-7998
Cuneo

151707998
340-0192/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-057-6846
Tacchetto Ammortizz

150576846
34236-1016: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-204-4341
Blocki Caster Wheel

152044341
26HJ04143043S01-801/063: RNCC: 3 | RNVC: 2
(241)A001926HJ04143043S01-801/06: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-197-7741
Structual Angle

151977741
109-0310-09-195: RNCC: 3 | RNVC: 2
(241)A0126109-0310-09-195: RNCC: 5 | RNVC: 2

29 Apr 2004

5340-15-067-8040
Maniglia

150678040
GALP40201-3A: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-205-3607
Spring Holder

152053607
550-001-00101: RNCC: 3 | RNVC: 2

2 Mar 2012

5340-15-149-5637
Shock Mount

151495637
600-4301-003: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-181-0568
Engine Accessory Bracket

151810568
071675: RNCC: 3 | RNVC: 2
(241)A3593071675: RNCC: 5 | RNVC: 2

10 Oct 2008

5340-15-109-0852
Double Angle Bracket

151090852
60113365: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-152-2050
Tappo Di Plastica

151522050
4726644: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-15-200-7792
Resilient Mount

152007792
1R 343429: RNCC: 3 | RNVC: 2
(241)A01061R 343429: RNCC: 5 | RNVC: 2

26 Feb 2006

5340-15-003-3466
Manual Control Lever

150033466
182724334: RNCC: 3 | RNVC: 2
(241)A0199182724334: RNCC: 5 | RNVC: 2

4 Nov 2013

5340-15-193-9620
Protection

151939620
109-0881-12-209: RNCC: 3 | RNVC: 2

4 Aug 2010

5340-15-107-1077
Electrical-Me Post

151071077
301-01-1590: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-111-5915
Handle

151115915
A12157-01-20: RNCC: 3 | RNVC: 2
A12157-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-074-4413
Turnbuckle

150744413
2A8UNI20210T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-102-1030
Gomma Cinghia

151021030
193-0487/24: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-002-3683
Paracolpo In Strisc

150023683
369-09070-115: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-15-007-2792
Bullone A Mo Staffa

150072792
1390869: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-216-4505
Chiave Grezza Per C

152164505
00570: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-006-2578
Staffa Speciale

150062578
0-11010: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-189-8467
Tirante Ponte Assal

151898467
A.2.11.011: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-151-1153
Assieme Staffa Di F

151511153
381-0337/01: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-054-7558
Turnbuckle

150547558
32-03-358: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-074-4352
Turnbuckle

150744352
1C20UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-185-7195
Fascetta (Confezion

151857195
360X4,5: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-109-1536
Rim Clen Clamp (1)

151091536
100900329000: RNCC: 5 | RNVC: 2
100900329000: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-15-103-5099
Control Rod

151035099
808-59412-1: RNCC: 3 | RNVC: 2

21 Apr 1988

5340-15-203-5206
Angle Bracket

152035206
677A2120-405: RNCC: 3 | RNVC: 2
(241)A0019677A2120-405: RNCC: 5 | RNVC: 2

12 Feb 2008

5340-15-110-2806
Bracket Rh

151102806
P120317-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-101-2996
Hinge Half

151012996
P-135207-002: RNCC: 3 | RNVC: 2
P135207-002: RNCC: 5 | RNVC: 2

8 Apr 1988

5340-15-169-3592
Lucchetto C.

151693592
F72011000: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-110-3757
Handwheel

151103757
VR300FP+1: RNCC: 3 | RNVC: 2
91628210: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-152-1100
Double Angle Bracket

151521100
60139167: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-180-3945
Corrosion Preventive Anode

151803945
5852527301DM: RNCC: 3 | RNVC: 2
(241)A31215852527301DM: RNCC: 5 | RNVC: 2

8 May 2008

5340-15-178-5001
Dust And Moisture Seal Protective Cap

151785001
284-7182: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-207-8651
Angle Bracket

152078651
5801341270: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-007-4995
Nonrotating Shaft Eye Bracket

150074995
1139-05-107: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-194-3921
Doubler

151943921
109-0371-47-133: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-121-4152
Dust And Moisture Seal Protective Cap

151214152
837940-10: RNCC: 3 | RNVC: 2
837940-10: RNCC: 5 | RNVC: 9

12 Dec 1995

5340-15-141-2454
Padlock

151412454
I5282: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-153-0935
Assieme Disco

151530935
24045GR83: RNCC: 3 | RNVC: 2

21 Nov 2000

5340-15-149-1805
Inserto Speciale

151491805
2401-0045-001: RNCC: 3 | RNVC: 2

15 Dec 1998

5340-15-170-8538
Lastra Gomma Espans

151708538
58121-03/003: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-110-6388
Handwheel

151106388
182412: RNCC: 3 | RNVC: 2
0-111022: RNCC: 5 | RNVC: 2

16 Mar 1990

5340-15-231-6114
Tassello

152316114
0-113889: RNCC: 3 | RNVC: 2
534015E090103: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-232-9596
Tassello In Acciaio

152329596
SBS 9/4: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-15-211-1689
Cilindro Cisa

152111689
10020050: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-155-0275
Access Door

151550275
1PA9172500226838000: RNCC: 3 | RNVC: 2
500226838000: RNCC: 3 | RNVC: 2

8 Jan 2002

5340-15-158-6424
Quick Release Plunger

151586424
GN615M16K5: RNCC: 3 | RNVC: 2
122607523: RNCC: 5 | RNVC: 2

12 Mar 2004

5340-15-113-8855
Dust And Moisture Seal Protective Plug

151138855
79035411: RNCC: 3 | RNVC: 2

17 Mar 1992

5340-15-136-9094
Piastrina Collegame

151369094
71028-2: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-020-2078
Staffa Per Carrucol

150202078
01-231Q29: RNCC: 3 | RNVC: 2
55.35.021.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-202-8550
Chiusura Nasello

152028550
035422278A: RNCC: 3 | RNVC: 2
18866176-6: RNCC: 5 | RNVC: 2

29 Jul 2007

5340-15-115-1960
Gover Rack Lever Op

151151960
560-5200-200: RNCC: 3 | RNVC: 2
82-00777: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-052-0016
Morsetto Serratubi

150520016
B740-20-16: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-220-0489
Piatto Calandrato R

152200489
S1-7B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-020-3699
Squadretta S Appogg

150203699
01-231M62S: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-053-9404
Turnbuckle

150539404
260-04-30-19: RNCC: 3 | RNVC: 2
260-04-30-19: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-006-6675
Rod

150066675
20005-004-01: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-187-0254
Collare Speciale

151870254
4641-25-011: RNCC: 3 | RNVC: 2
(241)A09124641-25-011: RNCC: 5 | RNVC: 2

27 Jan 2009

5340-15-121-6133
Tube Fourche

151216133
8D0055512: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-188-9648
Dust And Moisture Seal Protective Cap-Plug

151889648
2853-016: RNCC: 3 | RNVC: 2

11 Jan 2010

5340-15-110-8593
Cardineassieme

151108593
251753G1: RNCC: 3 | RNVC: 2

10 Sep 1990

5340-15-118-2594
Headless Grooved Rod

151182594
D0484927: RNCC: 3 | RNVC: 2

10 Apr 1995

5340-15-064-2450
Tappo

150642450
109-0102-14-101: RNCC: 3 | RNVC: 2

31 Jan 1984

5340-15-119-6785
Dust And Moisture Seal Protective Cap-Plug

151196785
834560-10: RNCC: 3 | RNVC: 2
834560-10: RNCC: 5 | RNVC: 9

19 Oct 1994

5340-15-121-8867
Maniglia A Ripresa

151218867
MR63PM6X20SIN: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-001-8470
Unavailable

150018470
ED0026051100-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-153-0279
Tirante A Teste Fil

151530279
66255F01: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-193-7892
Manual Control Lever

151937892
106-000-00078: RNCC: 3 | RNVC: 2

14 Jul 2010

5340-15-110-5401
Handle G-Pipp

151105401
I301-90+X-M10: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-162-9592
Teflon Ring

151629592
10C-028-102: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-15-205-7536
Dust And Moisture Seal Protective Cap-Plug

152057536
109-0614-39-101: RNCC: 3 | RNVC: 2

30 Mar 2012

5340-15-170-8200
Traversa Mobile

151708200
340-1005/07.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-170-8569
Lastra P.M.M.A. Sp.

151708569
58261-01/008: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-058-6687
Assembled Nut Retainer

150586687
90-6410-21: RNCC: 3 | RNVC: 2

3 May 1974

5340-15-005-4485
Electrical-Me Post

150054485
1137-19-191: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-184-6194
Catenaccio

151846194
NSN534015R517043: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-106-7597
Staffetta

151067597
4556142: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-006-5284
Eyebolt

150065284
SWL 2T: RNCC: 3 | RNVC: 2
(241)A0478SWL 2T: RNCC: 5 | RNVC: 2

16 Dec 2013

5340-15-147-0898
Manual Control Handle

151470898
S40N12: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-149-3351
Riparo Cavi Da Vola

151493351
98482387: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-113-5435
Giuntoarticolatocom

151135435
324A2046-403: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-198-7910
Pipe Bracket

151987910
60188351: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-169-4701
Lucchetto S&G

151694701
F72012983: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-007-1050
Dust And Moisture Seal Protective Cap

150071050
341-01-06-68: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-162-3348
Dust And Moisture Seal Protective Cap

151623348
EP-12: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-059-4616
Dust And Moisture Seal Protective Cap-Plug

150594616
10-26-58-00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-007-5219
Nonrotating Shaft Eye Bracket

150075219
1139-02-014: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-220-0505
Lam.Elcom Sys Lg450

152200505
S1-145C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-194-1210
Dust And Moisture Seal Protective Cap-Plug

151941210
IPT3181-10CF: RNCC: 3 | RNVC: 2
IPT3181-10CF: RNCC: 5 | RNVC: 2
IPT3181-10CF: RNCC: 5 | RNVC: 2

13 Sep 2010

5340-15-007-7007
Electrical-Me Post

150077007
1141-38-101: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-066-4083
Tappo By-Pass Compl

150664083
68-903050-407: RNCC: 3 | RNVC: 2

25 Oct 1985

5340-15-108-9101
Supporto

151089101
22268-101B1: RNCC: 3 | RNVC: 2

4 Sep 1989

5340-15-006-2696
Fascetta Speciale

150062696
0-34049: RNCC: 3 | RNVC: 2
1PA39630-34049: RNCC: 5 | RNVC: 2

10 Apr 1979

5340-15-154-2023
Staffa Superiore Si

151542023
0-168274: RNCC: 3 | RNVC: 2
1PA39630-168274: RNCC: 5 | RNVC: 2
(241)A39630-168274: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-102-3701
Pistoncino

151023701
109-0406-76-1: RNCC: 3 | RNVC: 2

6 Dec 1986

5340-15-003-7493
Rivestimento Connes

150037493
32330-6552: RNCC: 3 | RNVC: 2
(241)A014732330-6552: RNCC: 5 | RNVC: 2

20 Nov 2013

5340-15-191-6591
Portabiciclette Zin

151916591
431010: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-120-6771
Riduzione In Ottone

151206771
D0579059: RNCC: 3 | RNVC: 2

29 Jun 1996

5340-15-006-2560
Guida Speciale

150062560
0-28885: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-193-5120
Leva

151935120
552301223000: RNCC: 3 | RNVC: 2
(241)A1140552301223000: RNCC: 5 | RNVC: 2

26 May 2010

5340-15-105-8174
Sostegno Elastico

151058174
591148: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-163-1402
Clip

151631402
1305912080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-109-3101
Manigliascorrimento

151093101
60102691: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-195-0129
Aggancio Con Viti

151950129
KITGE-04-45: RNCC: 3 | RNVC: 2
(241)A2437KITGE-04-45: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-045-4511
Semiccollare Femmin

150454511
787-12-52-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-181-4446
Slitta E Piastra Di

151814446
PRT415: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-107-2522
Dust And Moisture Seal Protective Plug

151072522
2501-202-06: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-001-8929
Pattino Di Metallo

150018929
8873/64/5015-17-7: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-120-6709
Control Rod

151206709
D0473203: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-152-3807
Tirante

151523807
0-42272: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-15-144-7897
Anode Retaining Plug

151447897
A.1.G.: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-179-7991
Counterweight

151797991
6-00-005: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-006-2561
Guida Speciale

150062561
0-28886: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-216-1455
Apribarattolo X Oli

152161455
APRIBARATTOLO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-179-8045
Rubber Feet

151798045
06.05.1930: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-174-6890
Assieme Adattatore

151746890
009A4870-801: RNCC: 3 | RNVC: 2

17 Sep 2003

5340-15-142-9457
Supporto Elastico

151429457
575445: RNCC: 3 | RNVC: 2
98.3.10804: RNCC: 3 | RNVC: 2
575445: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-120-2030
Piastra Base Bi-10

151202030
404/25: RNCC: 3 | RNVC: 2

9 Feb 1995

5340-15-170-8124
Bandella Stagnata 1

151708124
314-0750/08: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-204-6945
Clamp Blo Half

152046945
109-0761-97-111: RNCC: 3 | RNVC: 2

13 Dec 2011

5340-15-059-1617
Resilient Mount

150591617
160-0135-01A: RNCC: 3 | RNVC: 2

19 Jun 1974

5340-15-105-5998
Staffa A Gomito

151055998
8983534: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-5964
Staffa A Gomito

151055964
4972717: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-237-8764
Cerniera A 3 Ali

152378764
91/B3: RNCC: 3 | RNVC: 2
534015E117669: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-155-4412
L Lay-By Stand Assy

151554412
CBD71046G01: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-105-5986
Staffa A Gomito

151055986
23984: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-005-2193
Threaded End Tensioning Tie Rod

150052193
554116171000: RNCC: 2 | RNVC: 3
541-16-1710: RNCC: 3 | RNVC: 2

16 Sep 1980

Load More Results