What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 59 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 59 of 72

5340-15-147-5808
T-Fitting

151475808
98RV995: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-105-6320
Collare Serraggio

151056320
38983540: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-4034
Turnbuckle

150744034
2A16UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-153-7378
Headless Straight Rod

151537378
142058177: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-193-4655
Dust And Moisture Seal Protective Plug

151934655
340-8139/01: RNCC: 3 | RNVC: 2

17 May 2010

5340-15-063-6163
Nut And Bolt Locking Plate

150636163
4709424: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-108-4173
Helical Compression Spring Seat

151084173
4673610: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-061-5218
Access Cover Plate

150615218
000200028600: RNCC: 5 | RNVC: 2
1200096-156000005: RNCC: 5 | RNVC: 2
000200028600: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-055-6667
Mensola Posteriore

150556667
543715: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-068-8730
Blocco

150688730
206-1015-59-5: RNCC: 3 | RNVC: 2

9 Dec 1985

5340-15-204-9923
Turnbuckle

152049923
60189661: RNCC: 3 | RNVC: 2
(241)A424960189661: RNCC: 5 | RNVC: 2

8 Feb 2012

5340-15-179-0030
Plate Assembly

151790030
RS 413 474 AE: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-217-6898
Cacciavite Dowidat

152176898
99114: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-193-0190
Threaded End Tensioning Tie Rod

151930190
60196202: RNCC: 3 | RNVC: 2
(241)A424960196202: RNCC: 5 | RNVC: 2

6 Apr 2010

5340-15-198-4618
Dust And Moisture Seal Protective Plug

151984618
5177G2095: RNCC: 3 | RNVC: 2
(241)A02265177G2095: RNCC: 5 | RNVC: 2

28 Sep 2004

5340-15-060-8255
Handwheel

150608255
000200178750: RNCC: 5 | RNVC: 2
000200178750: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-139-2099
Tassello

151392099
578255: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-194-7944
Connection

151947944
21310105: RNCC: 3 | RNVC: 2

17 Jan 2011

5340-15-104-8892
Fissaggio Gaffetta

151048892
12.506.830: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-109-5888
Supportodimontaggio

151095888
20530900A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-169-6939
Lucchetto C.

151696939
F72017934: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-102-0773
Ala Cerniera A Volo

151020773
213A7197-401: RNCC: 3 | RNVC: 2

29 Jul 1988

5340-15-063-6195
Cover Plate Access

150636195
4721288: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-053-2376
Fixed Trainer (1)

150532376
6-3149-401-49183: RNCC: 3 | RNVC: 2

11 Mar 1969

5340-15-005-7990
Anello

150057990
485A105: RNCC: 3 | RNVC: 2

20 May 1979

5340-15-158-5512
Special Protezione

151585512
122611266: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-064-6525
Fixing To Tower

150646525
74833: RNCC: 3 | RNVC: 2

9 May 1984

5340-15-215-5633
Puntimetallicisicut

152155633
0493G-12: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-136-2381
Staffa

151362381
5924498: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-145-3169
Resilient Mount

151453169
D1414403: RNCC: 3 | RNVC: 2

15 Dec 1997

5340-15-233-4783
Ruota Con Cuscinett

152334783
X26/NDX/D1: RNCC: 3 | RNVC: 2
534015E024596: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-189-5499
Distanziatore

151895499
NAS73-4E105: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-236-3093
Serratura Da Infila

152363093
52611-50: RNCC: 3 | RNVC: 2
534015E004359: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-121-2565
Tirante Destro Spec

151212565
309-4882-00: RNCC: 3 | RNVC: 2

2 Nov 1995

5340-15-179-1613
Guide

151791613
RS 301 454 A: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-105-8176
Sostegno Elastico

151058176
66-BL1: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-107-1845
Plastic Bumper

151071845
RS305061A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-195-9109
Latch Cover

151959109
J04841209-001: RNCC: 3 | RNVC: 2
(241)A0019J04841209-001: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-124-6688
Leva Pedale Frizion

151246688
4678933: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-166-4917
Serratura Da Infila

151664917
4416580: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-074-4189
Turnbuckle

150744189
1B10UNI2019ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-156-3860
Support

151563860
(241)A3460CBD71351P04: RNCC: 3 | RNVC: 2
CBD71351P04: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-170-8252
Blocchetto Di Spint

151708252
340-4409/01.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-174-7609
Regolazione Verde

151747609
68215-25/753: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-151-7560
Fitting Assembly

151517560
J52850750-404: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-110-1059
Gruppo Sgancio Ejet

151101059
301-3197-01: RNCC: 3 | RNVC: 2

10 Apr 1990

5340-15-112-2668
Helical Compression Spring Seat

151122668
773146: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-116-2958
Resilient Mount

151162958
190515226: RNCC: 3 | RNVC: 2

19 Apr 1993

5340-15-179-7270
Dust And Moisture Seal Protective Plug

151797270
1167312: RNCC: 3 | RNVC: 2
(241)A42491167312: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-003-1057
Manual Control Lever

150031057
182719079: RNCC: 3 | RNVC: 2
(241)A0199182719079: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-153-8182
Manual Control Lever

151538182
16014A133980: RNCC: 5 | RNVC: 3
16014A133980: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-174-6390
Corrosion Preventive Anode

151746390
300.01218: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-001-3650
Striker Support

150013650
22501542: RNCC: 3 | RNVC: 2

25 Jun 2013

5340-15-196-6302
Padlock

151966302
PN UAS 00043427: RNCC: 3 | RNVC: 2
5340F76035702: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-107-3042
Sostegno Elastico

151073042
723009010900: RNCC: 2 | RNVC: 3
12 SAB/133-15E: RNCC: 2 | RNVC: 3
S12-B-133-15: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-194-0033
Toothed Plate

151940033
109-0630-05-105: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-055-6460
Turnbuckle

150556460
1304-3-106V: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-052-9098
Forcella

150529098
204-4610-23-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-147-5129
Padlock

151475129
1124/UI-VEST-P.B.: RNCC: 2 | RNVC: 2
140/INT-P.B.: RNCC: 2 | RNVC: 2
140/INT-P.B.: RNCC: 3 | RNVC: 2
100.30-FF.AA.-P.B.: RNCC: 3 | RNVC: 2
LUCCHETTO PB: RNCC: 3 | RNVC: 2

29 Jan 1999

5340-15-151-9960
Tirante

151519960
0-173864: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-208-8309
Lucchetto Yale Da M

152088309
30: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-188-8673
Clip P.A.

151888673
4280126S01: RNCC: 3 | RNVC: 2
(241)AB55542800126S01: RNCC: 5 | RNVC: 2
42800126S01: RNCC: 5 | RNVC: 2

30 Nov 2009

5340-15-179-0039
Plate

151790039
RS 413 794 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-166-5123
Lucchetto Viro In O

151665123
VIR090: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-009-1740
Rubber Bumper

150091740
389341: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-074-4044
Turnbuckle

150744044
2A56UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-162-2246
Bracket

151622246
60-17413-00: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-200-9439
Pastiglia

152009439
1707.801.032: RNCC: 3 | RNVC: 2
50101001: RNCC: 5 | RNVC: 2
(241)A60971707.801.032: RNCC: 5 | RNVC: 2

19 Apr 2006

5340-15-190-6447
Shaft

151906447
5E3C2: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-189-8147
Fascetta Serracavo

151898147
1703924: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-147-1620
Supporto (1) Connet

151471620
2-C8485.0000//D: RNCC: 5 | RNVC: 2
2-C8485.0000//D: RNCC: 5 | RNVC: 9

1 Oct 1997

5340-15-106-9421
Maniglia Fermasport

151069421
2-200-21: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-058-6609
Semicerniera Compl

150586609
204-6800-1-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-169-7220
Lucchetto S&G

151697220
F72018178: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-144-4034
Handwheel

151444034
0131753: RNCC: 3 | RNVC: 2
852-7: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-064-7009
Bracket

150647009
A-125112-003: RNCC: 3 | RNVC: 2
A125112-003: RNCC: 5 | RNVC: 2

10 Jun 1984

5340-15-060-4647
Electrical-Me Post

150604647
1127-11-671: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-134-3452
Fascetta

151343452
11-10182: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-108-0795
Metal Runner

151080795
32-03-314: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-138-7453
Ghiera

151387453
71-08422: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-112-2886
Rotella Speciale

151122886
263A1649-003: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-210-5569
Ass.Bilancino

152105569
251921-G1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-148-0013
Semicerniera

151480013
129-0640-46-102: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-166-5215
Supporto Cardanico

151665215
1301691: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-113-8747
Sospensioneantiurto

151138747
1Q 517080LB: RNCC: 3 | RNVC: 2
1Q 517080LB: RNCC: 5 | RNVC: 9

19 May 1993

5340-15-113-2541
Complessivo Flangia

151132541
377A2048-409: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-074-4022
Turnbuckle

150744022
1A56UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-206-3079
Rod Retainer Clip

152063079
30064087: RNCC: 3 | RNVC: 2
Z07.07.12.00: RNCC: 5 | RNVC: 2
2530PL0916186: RNCC: 6 | RNVC: 9

1 Jun 2012

5340-15-115-2065
Safetypin

151152065
SS975: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-180-8142
Cable Guard Assembl

151808142
N252G4151101: RNCC: 3 | RNVC: 2
(241)A0126N252G4151101: RNCC: 5 | RNVC: 2

24 Jul 2008

5340-15-216-8263
Tassello In Acciaio

152168263
0424: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-117-6779
Spina Di Arresto

151176779
27180-101B00: RNCC: 3 | RNVC: 2

10 Jan 1994

5340-15-058-6063
Serratura A Gancio

150586063
1971-15: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-166-4897
Gancio A Molla

151664897
557183: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-195-0036
Tassello 6X40 Con V

151950036
BLBIZ710115: RNCC: 3 | RNVC: 2
(241)AB882BLBIZ710115: RNCC: 5 | RNVC: 2
570021: RNCC: 5 | RNVC: 2
(241)AB882570021: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-153-7363
Forcella Testa Di T

151537363
142057290: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-194-8932
Bacchette In Lega D

151948932
SOGMA200: RNCC: 3 | RNVC: 2
(241)AE590SOGMA200: RNCC: 5 | RNVC: 2

31 Jan 2011

5340-15-185-7145
Confezione Fischer

151857145
00264: RNCC: 3 | RNVC: 2
(241)A602800264: RNCC: 5 | RNVC: 2

30 Dec 2008

5340-15-178-6862
Blank Panel

151786862
A156433-1: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-151-4192
Multiple Angle Bracket

151514192
0-103444: RNCC: 3 | RNVC: 2

23 May 2000

5340-15-183-8690
Lucchetti

151838690
COMM631020060005: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-154-1370
Supporto Sagomato

151541370
0-82812: RNCC: 3 | RNVC: 2
(241)A39630-82812: RNCC: 5 | RNVC: 2
1PA39630-82812: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-122-1331
Ring

151221331
A-39107-001: RNCC: 3 | RNVC: 2
A39107-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-112-2841
Fi Testa Di Tieante

151122841
433A1230-401: RNCC: 3 | RNVC: 2

10 Apr 1991

5340-15-000-1640
Electronic Equipment Hardware Kit

150001640
MAGN0142: RNCC: 3 | RNVC: 2
COGGMVER10095: RNCC: 5 | RNVC: 2

4 Feb 2013

5340-15-163-3858
Spacing Threaded Standoff

151633858
9460427: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-154-1751
Pignone Elicoidale

151541751
130172-2: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-006-0148
Anchor Strap

150060148
3512TL419: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-139-9311
Albero Con Supporto

151399311
K326SF: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-139-7978
Catenella Completa

151397978
1001705: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-218-7002
Lucchetto Tenditore

152187002
054700011: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-1081
Montante

151561081
N636G1003201: RNCC: 3 | RNVC: 2

22 Nov 2002

5340-15-001-6700
Molla

150016700
174050012: RNCC: 3 | RNVC: 2
174050012: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-105-6043
Eye Hook

151056043
12.504.973: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-007-0884
Tappo Speciale

150070884
0-20936: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-147-6971
Dust And Moisture Seal Protective Plug

151476971
4TAP413210: RNCC: 3 | RNVC: 2

3 Mar 1998

5340-15-026-8655

5340-15-102-1040
Compasso Speciale

151021040
193-0484/30: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-104-8864
Fissaggio Gaffetta

151048864
001.6786.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-004-0665
Elemento Chiavistel

150040665
28115-101: RNCC: 3 | RNVC: 2

7 Feb 1978

5340-15-231-1135
Elettroserratura Ad

152311135
7935-304: RNCC: 3 | RNVC: 2
534015E081852: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-119-5806
Supporto Sospension

151195806
4859661: RNCC: 3 | RNVC: 2

19 Sep 1994

5340-15-178-9309
Plaque D'appui Tira

151789309
FG075MD221AA00: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-218-2534
Gancio Pannello For

152182534
B-02/20: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-6084
Complessiv Cerniera

151156084
D0470481: RNCC: 3 | RNVC: 2

6 Jun 1994

5340-15-115-7111
Disco Metallico Spe

151157111
D0470310: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-020-2184
Squadretta Destra

150202184
01-231M62D: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-149-4925
Pignone

151494925
0552000-17: RNCC: 3 | RNVC: 2

20 Apr 1999

5340-15-193-1340
Cover

151931340
00233R0670: RNCC: 3 | RNVC: 2

19 Apr 2010

5340-15-205-7188
Molla

152057188
5340159750130: RNCC: 3 | RNVC: 2
(241)A88205340159750130: RNCC: 5 | RNVC: 2

28 Mar 2012

5340-15-112-0440
Piastrina Speciale

151120440
266A0018-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-230-3520
Fascetta Di Fermo

152303520
19051600: RNCC: 3 | RNVC: 2
534015E144670: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-206-2606
Key Blank

152062606
CISA-CS17: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-106-9237
Coperchio

151069237
1362142: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-151-9383
Piastra

151519383
0-172821: RNCC: 3 | RNVC: 2
00172821: RNCC: 3 | RNVC: 2
(241)A39630-172821: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-117-4901
Mezza Cerniera A Na

151174901
67288-101: RNCC: 3 | RNVC: 2
67288-101A00: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-15-005-4054
Cover Plate Access

150054054
1137-05-249: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-211-9158
Molla Chiudiporta M

152119158
MOLLAMAB: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-166-5108
Serratura Elettroni

151665108
CISA11721: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-1935
Resilient Mount

151181935
60137391: RNCC: 3 | RNVC: 2
(241)A424960137391: RNCC: 5 | RNVC: 2

22 Apr 1994

5340-15-027-3680

5340-15-027-1817

5340-15-203-6505
Manual Control Handle

152036505
MECC22880: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-148-5614
Piastrina

151485614
275A2642-003: RNCC: 3 | RNVC: 2

27 Aug 1998

5340-15-156-6531
Turnbuckle

151566531
TO.026.87-MM30UNI2020: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-231-1115
Maniglione

152311115
59180-10: RNCC: 3 | RNVC: 2
534015E066569: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-003-9060
Headless Straight Rod

150039060
182724524: RNCC: 3 | RNVC: 2
(241)A0199182724524: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-198-5742
Control Rod

151985742
1001519944: RNCC: 3 | RNVC: 2
(241)A97721001519944: RNCC: 5 | RNVC: 2

15 Oct 2004

5340-15-171-5636
Confezione Fascette

151715636
CONFEZIONE FASCETTE IN FERRO SER: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-006-2960
Hinge

150062960
1379061: RNCC: 3 | RNVC: 2
1379061: RNCC: 5 | RNVC: 9

29 Jun 1979

5340-15-177-6766
Split Pin

151776766
C00.1330: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-051-4214
Staffa

150514214
4548605: RNCC: 3 | RNVC: 2
4548605: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-074-4418
Turnbuckle

150744418
1B12UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-103-1949
Blocchetto Per Mors

151031949
DE013.13.356: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-051-3586
Coprispigolo

150513586
4507074: RNCC: 3 | RNVC: 2
4507074: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-121-6191
Anchor Strap

151216191
80A049864: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-155-8259
Sensor Bracket

151558259
4112T76G02: RNCC: 3 | RNVC: 2
4112T76G02: RNCC: 3 | RNVC: 2

11 Jul 2002

5340-15-122-2691
Verrou Point Mort

151222691
800044300: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-122-2198
Anchor Strap

151222198
800067707: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-136-0927
Staffa

151360927
4684881: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-147-5138
Assieme Pannello

151475138
46741-001: RNCC: 5 | RNVC: 2
46741-001: RNCC: 5 | RNVC: 9
46741-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-204-4977
Handle

152044977
42563858: RNCC: 3 | RNVC: 2
7115654: RNCC: 5 | RNVC: 2
CV181735A: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-105-3412
Handwheel

151053412
04-084-B-S08: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-163-3637
Helical Compression Spring Seat

151633637
4817424: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-115-7063
Coperchio

151157063
D1401283: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-200-7712
Resilient Mount

152007712
MGDNP30: RNCC: 3 | RNVC: 2
(241)A2980MGDNP30: RNCC: 5 | RNVC: 2

23 Feb 2006

5340-15-201-8445
Resilient Mount

152018445
D1426179: RNCC: 3 | RNVC: 2
(241)A0461D1426179: RNCC: 5 | RNVC: 2

21 Dec 2006

5340-15-003-0773
Stand Base

150030773
182708067: RNCC: 3 | RNVC: 2
(241)A0199182708067: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-108-6439
Tassello Elastico

151086439
93916745: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-191-1315
Locking Plate

151911315
432208179590: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-112-8426
Strozzatore

151128426
469628: RNCC: 3 | RNVC: 2
D0469628: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-193-2666
Hook Lock Cylinder

151932666
21506592: RNCC: 3 | RNVC: 2

23 Apr 2010

5340-15-139-5651
Tassello

151395651
93190476: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-126-4560
Ammortizzatore

151264560
XM622: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-065-0693
Double Angle Bracket

150650693
23.65.84.00: RNCC: 3 | RNVC: 2

26 Dec 1983

5340-15-116-4867
Double Angle Bracket

151164867
60165141: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-136-7890
Tappo

151367890
808-73153-15: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-148-7522
Tappo Speciale

151487522
2206-0017-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-203-1884
Hinge

152031884
P75TC929A41-001: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-147-3080
Bracket

151473080
302953: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-108-6210
Control Rod

151086210
93806870: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-201-6951
Snap Hook

152016951
202620A: RNCC: 3 | RNVC: 2
(241)A3492202620A: RNCC: 5 | RNVC: 2

19 Nov 2006

5340-15-231-8965
Perno

152318965
4829338: RNCC: 3 | RNVC: 2
534015E106766: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-074-4396
Turnbuckle

150744396
1A20UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-212-0954
Fascette Serracavo

152120954
4/11660: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-110-3724
Achse

151103724
F304C3A-29: RNCC: 3 | RNVC: 2
F304C3A-29: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-162-6560
Plate

151626560
SF260-13-48-11: RNCC: 5 | RNVC: 2
SF260-13-48-11: RNCC: 5 | RNVC: 9

7 Dec 2001

5340-15-113-7346
Mounting Braket

151137346
538-02-1590: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-152-3427
Flangia

151523427
0-119179: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-15-151-7095
Staffa

151517095
0-179731: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-151-7864
Double Angle Bracket

151517864
0-179853: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-206-5786
Utility Resilient Mount

152065786
H100-217-76-105: RNCC: 3 | RNVC: 2
(241)A3121H100-217-76-105: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-170-2921
Tampone Assieme

151702921
212-8950-07-1: RNCC: 3 | RNVC: 2

5 Dec 2002

5340-15-188-2614
Angle Bracket

151882614
1Q 610367: RNCC: 3 | RNVC: 2

31 Aug 2009

5340-15-144-9536
Dust And Moisture Seal Protective Plug

151449536
16987801: RNCC: 3 | RNVC: 2

24 Feb 1997

5340-15-058-2872
Electronic Equipment Hardware Kit

150582872
21-97: RNCC: 3 | RNVC: 2

27 Mar 1975

5340-15-163-1759
Support

151631759
9616321580: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-213-3768
Lucchetto Di Sicure

152133768
PL1805000: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-154-1762
Astina Livello Olio

151541762
130327: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-105-6328
Collare Serraggio

151056328
974193: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-6033
Albero Molla Assiem

151206033
309-5949-00: RNCC: 3 | RNVC: 2

10 Jul 1995

5340-15-198-7916
Pipe Bracket

151987916
60188365: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-166-5007
Clamp

151665007
CE14383C10: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-218-0440
Padlock

152180440
28550-84-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-206-8517
Co-Ordinating Arm

152068517
21310082: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-210-6494
Tassello Sx 10S In

152106494
70010: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-009-1463
Metal Runner

150091463
1380831: RNCC: 3 | RNVC: 2

23 Sep 1979

5340-15-136-7241
Portello Accesso

151367241
212-030-283-9: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-106-9579
Supporto

151069579
4576635: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-106-2555
Sostegno El Piastra

151062555
759915: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-153-2533
Turnbuckle Body

151532533
122605212: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-107-2329
Supporto Rigido

151072329
66121-116: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-111-4586
Terminal

151114586
275A2342-001: RNCC: 3 | RNVC: 2

6 Dec 1990

5340-15-160-7060
Lucchetto S&G

151607060
F720138811: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-004-8144
Cover Plate Access

150048144
0-33160: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-237-9526
Kit 4 Ruote Orienta

152379526
127-461: RNCC: 3 | RNVC: 2
534015E152884: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-156-8385
Rubber Bumper

151568385
10-B: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-15-007-3634
Fascetta Speciale

150073634
0-33458: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-179-0035
Plate

151790035
RS 413 776 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-151-7856
Double Angle Bracket

151517856
0-178727: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-149-2887
Multiple Angle Bracket

151492887
4859117: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-055-6733
Staffa

150556733
530971: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-8505
Riscontro

151128505
471751: RNCC: 3 | RNVC: 2
(241)A0461471751: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-112-0446
Dispositivo Di Supp

151120446
265A1040-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-112-3758
Luggage Bumper

151123758
60147176: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-212-1601
Lucchetto Da Mm 25

152121601
LUCCHETTOMM25: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-071-7533
Handwheel

150717533
52: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-002-7182
Molla

150027182
1740: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-151-4585
Shock Mount Pad

151514585
UXGP0020000: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-116-9729
Harness

151169729
W005141: RNCC: 3 | RNVC: 2
(7001)5340151169729: RNCC: 5 | RNVC: 2

18 Nov 1997

5340-15-122-2328
Couronne Acier Z46

151222328
8A0052302: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-056-6049
Longherina Per Tett

150566049
15990: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-166-5022
Shaft

151665022
307107: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-138-4249
Borchietta

151384249
5484434: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-156-3848
Plugging Plate

151563848
CBD71342P02: RNCC: 3 | RNVC: 2
(241)A3460CBD71342P02: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-178-9497
Turnbuckle

151789497
13070000010: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-154-0334
Tirante Speciale

151540334
0-103892: RNCC: 3 | RNVC: 2
(241)A39630-103892: RNCC: 5 | RNVC: 2
1PA39630-103892: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-112-7460
Cap

151127460
99000064: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-149-3148
Turnbuckle Body

151493148
4886106: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-074-4083
Turnbuckle

150744083
2B33UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4085
Turnbuckle

150744085
2B39UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-122-2757
Entraineur Compteur

151222757
800051981: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-178-1679
Lock

151781679
7445212: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-068-2314
Anchor Strap

150682314
W011898: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-068-2310
Anchor Strap

150682310
W011885: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-218-1951
Morsetto

152181951
MORSETTO1000MM: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-117-5850
Leva Bloc Supporto

151175850
121102139: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-15-109-4702
Turnbuckle Body

151094702
1Q 532949LA: RNCC: 3 | RNVC: 2
1Q 532949LA: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-206-0865
Fascetta

152060865
TA09C89SSR20: RNCC: 3 | RNVC: 2
(241)A3729TA09C89SSR20: RNCC: 5 | RNVC: 2

16 May 2012

5340-15-114-7699
Plate Retai

151147699
X446E12: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-147-0656
Supporto Ad Angolo

151470656
109-0858-36-127: RNCC: 3 | RNVC: 2

21 Aug 1997

5340-15-187-6431
Shaftlatch Assy

151876431
109-0362-24-105: RNCC: 3 | RNVC: 2
(241)A0126109-0362-24-105: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-117-6765
Supporto Cerniera

151176765
26992-101A1: RNCC: 3 | RNVC: 2
26992-101A01: RNCC: 5 | RNVC: 2

10 Jan 1994

5340-15-218-5309
Tampone Abrasivo Gr

152185309
9696-100: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-157-9852
Hinge Half

151579852
J94345435-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-109-7286
Helical Compression Spring Seat

151097286
773842: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-205-3040

5340-15-105-8945
Tirante A Teste Fil

151058945
66W-A: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-006-2364
Serratura Speciale

150062364
0-33964: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-122-0370
Plug

151220370
98TA827: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-166-5194
Chiudiporta Ale

151665194
ART691003: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5211
Attachment Block

151665211
1301751: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-115-7055
Coperchio

151157055
D0470008: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-108-2119
Metal Runner

151082119
466876: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-220-0519
Montante 2 Hea 200

152200519
S1-138B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4311
Turnbuckle

150744311
1B30UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-104-8903
Fissaggio Gaffetta

151048903
38809756: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-7046
Coperchietto

151157046
D0470177: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-177-4754
Dispositivo Di Tors

151774754
20EQ078: RNCC: 3 | RNVC: 2
(241)A166720EQ078: RNCC: 5 | RNVC: 2

24 Mar 2004

5340-15-179-9383
Dust And Moisture Seal Protective Cover

151799383
61610280: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-163-1201
Clip

151631201
1313565080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-147-5776
Stang

151475776
982150376: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-201-3057
Occhiello

152013057
162505271: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-001-5483
Stand Base

150015483
182719577: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-105-1748
Ala Cerniera

151051748
4958510: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-197-8237
Canaletta Metallica

151978237
9597 480 01129: RNCC: 3 | RNVC: 2
(241)A0042959748001129: RNCC: 5 | RNVC: 2

11 May 2004

5340-15-200-6447
Dust And Moisture Seal Protective Cap-Plug

152006447
RE60175: RNCC: 3 | RNVC: 2
(241)ACA64RE60175: RNCC: 5 | RNVC: 2

15 Feb 2006

5340-15-101-7826
Fascetta Speciale

151017826
SC32674.74D: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-009-0485
Helical Compression Spring Seat

150090485
4601301: RNCC: 3 | RNVC: 2

16 Apr 1980

5340-15-178-4939
Dust And Moisture Seal Protective Cap

151784939
307060: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-231-1138
Lucchetto Ad Arco M

152311138
574.7: RNCC: 3 | RNVC: 2
534015E089894: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-136-6296
Serratura

151366296
90-030-05A5: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-061-7995
Dust And Moisture Seal Protective Cap-Plug

150617995
4130-8211: RNCC: 3 | RNVC: 2
4130-8211: RNCC: 3 | RNVC: 2
54971-00: RNCC: 3 | RNVC: 2

19 Sep 1982

5340-15-112-0424
Dispositivo Di Supp

151120424
275A0711-405: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-001-3690
Neck Assy

150013690
1321002207: RNCC: 3 | RNVC: 2

25 Jun 2013

5340-15-156-2149
Special Rod Tie

151562149
(241)A3460CBD71272P03: RNCC: 3 | RNVC: 2
CBD71272P03: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-153-7257
Soffietto Protezion

151537257
142041202: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-166-5086
Adaptor Crimp Pot

151665086
2520122000: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-137-0981
Fascetta

151370981
71912: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-068-3564
Turnbuckle

150683564
N 3873 409: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-156-5882
Sealing Plug Assembly

151565882
4 5060035A: RNCC: 3 | RNVC: 2

28 Feb 2003

5340-15-150-4375
Carrello A Sfere

151504375
992: RNCC: 3 | RNVC: 2

1 Dec 1999

5340-15-127-7603
Fermaglio Ritegno M

151277603
9903279: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-213-7604
Barra Irizzontale M

152137604
07007014: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-008-1198
Scatola Serratura

150081198
SF260-11-130-01: RNCC: 3 | RNVC: 2
SF260-11-130-01: RNCC: 5 | RNVC: 9

22 Apr 1981

5340-15-182-4088
Cerniera Tornita Co

151824088
6X60: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-219-8138
Punti Metallici Ro-

152198138
PUMET138: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-237-7076
Maniglia

152377076
00022884: RNCC: 3 | RNVC: 2
534015E078062: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-112-8320
Forcella

151128320
467289: RNCC: 3 | RNVC: 2
D0467289: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-156-2151
Working Stand Assy

151562151
(241)A3460CBD70761G01: RNCC: 3 | RNVC: 2
CBD70761G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-156-2082
Plate

151562082
(241)A3460CBD71149P01: RNCC: 3 | RNVC: 2
CBD71149P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-221-6975
Padlock

152216975
5340RI0992379: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-200-4884
Tappo Di Gomma

152004884
N967G7103201: RNCC: 3 | RNVC: 2
(241)A0126N967G7103201: RNCC: 5 | RNVC: 2

25 Jan 2006

5340-15-166-4770
Squadretta

151664770
64307510172664A1: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-112-8551
Rasamento

151128551
466910: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-107-5063
Metal Runner

151075063
7301031: RNCC: 3 | RNVC: 2
7301031: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-136-6341
Inserto Filettato

151366341
0GH11240-50: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-182-6966
Piastra Di Ancoragg

151826966
3344430: RNCC: 3 | RNVC: 2
3344430: RNCC: 5 | RNVC: 9

30 Dec 2008

5340-15-104-8853
Fissaggio Gaffetta

151048853
12.504.977: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-001-4836
Molla

150014836
24067: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-219-4215
Dispositivo Di Bloc

152194215
342-3939: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-142-8564
Maniglia

151428564
10PV00006-585: RNCC: 3 | RNVC: 2
10PV00006-585: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-104-8887
Fissaggio Gaffetta

151048887
CR15-30: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-148-9171
Speciale Angolare

151489171
2103-0036-001: RNCC: 3 | RNVC: 2

29 Oct 1998

5340-15-147-7814
Handle

151477814
98-651: RNCC: 3 | RNVC: 2

10 Apr 1998

5340-15-147-5175
Piastrina

151475175
39674-001: RNCC: 5 | RNVC: 2
39674-001: RNCC: 5 | RNVC: 9
39674-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-187-4675
Angle Bracket

151874675
J28042158-001: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-15-187-6456
Door Latch Rod

151876456
109-0362-23-207: RNCC: 3 | RNVC: 2
(241)A0126109-0362-23-207: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-103-2680
Electrical-Me Post

151032680
5137-329-08: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-6372
Link

151126372
SF260-11-149-13: RNCC: 3 | RNVC: 2
SF260-11-149-13: RNCC: 5 | RNVC: 9

7 Sep 1989

5340-15-105-8943
Tirante A Teste Fil

151058943
000.7142.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-158-6068
Capsula A Scatto

151586068
122606503: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-178-6860
Blank Panel

151786860
A156414-1: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-153-7768
Morsetto (1) A Serr

151537768
06100A101740: RNCC: 5 | RNVC: 2
06100A101740: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-118-6624
C Bride De Fixation

151186624
75208242: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-154-5746
Testa Di Tirante Fi

151545746
112723144: RNCC: 2 | RNVC: 3

26 Jul 2001

5340-15-215-2992
Pistola Aria

152152992
ABC E1138/22: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-8199
Flangia Per Indicat

151208199
118633: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-120-6913
Coperchietto In Fer

151206913
D0470423: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-026-5201

5340-15-166-4828
Angolare

151664828
20403085391: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-106-2551
Sostegno El Piastra

151062551
759916: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-160-0009
Lucchetto Com

151600009
F720059281: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-102-3208
Sostegno Elastico

151023208
3.118.003: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-108-8028
Rim Clen Clamp (1)

151088028
60145758: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-217-6879
Cacciavite A Croce

152176879
111272031000: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-123-6218
Grillo Ad U Diritto

151236218
2233-3/4: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-120-1588
Resilient Mount

151201588
3-76717.0004//D: RNCC: 5 | RNVC: 2
3-76717.0004//D: RNCC: 5 | RNVC: 9

17 Jan 1995

5340-15-005-4058
Cover Plate Access

150054058
1137-16-134: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-220-1113
Tassello Fisher Dia

152201113
S5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-007-9668
Nut And Bolt Locking Plate

150079668
4430779: RNCC: 3 | RNVC: 2
4430779: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-166-4803
Fascetta

151664803
69R013P001A: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-156-5211
Nonmetallic Solid Wheel

151565211
56680013: RNCC: 3 | RNVC: 2

21 Feb 2003

5340-15-199-8066
Coperchio Del Soppo

151998066
02-06-261-1/A-G: RNCC: 3 | RNVC: 2
(241)A098402-06-261-1/A-G: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-15-152-2943
Wedge

151522943
302-4687-00: RNCC: 3 | RNVC: 2

17 Aug 2000

5340-15-220-0462
Pann.Alto 2400Hx420

152200462
S1-70: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-102-1051
Co Cinghia Speciale

151021051
192-0548/13: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-136-5420
Semicerniera

151365420
212-060-814-23: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-231-9101
Tassello Elastico

152319101
7784313: RNCC: 3 | RNVC: 2
534015E113953: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-170-3486
Plate

151703486
206-001-523-3: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-009-2602
Semicerniera

150092602
P-882739-001: RNCC: 3 | RNVC: 2

20 Aug 1980

5340-15-041-2412
Fascetta

150412412
1-2755-116-24446-5: RNCC: 3 | RNVC: 2
1-2755-1-16-24446-5: RNCC: 5 | RNVC: 2

22 Nov 1975

5340-15-232-4275
Cinghia Trasporto T

152324275
20049: RNCC: 3 | RNVC: 2
534015E141377: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-182-4388
Parking Bracket.

151824388
351A4524-001: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-113-2461
Supportospecialesin

151132461
311A6802-003: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-136-4885
Blocchetto

151364885
69552-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-4870
Fissacavo ( X Cavi

151664870
1215: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-195-0846
Ronde Viti Kit Dadi

151950846
F9041: RNCC: 3 | RNVC: 2
6521398: RNCC: 3 | RNVC: 2
(241)AD3516521398: RNCC: 5 | RNVC: 2
(241)AJ717F9041: RNCC: 5 | RNVC: 2

25 Feb 2011

5340-15-207-8122
Threaded End Tensioning Tie Rod

152078122
013350: RNCC: 3 | RNVC: 2
(241)AC658013350: RNCC: 5 | RNVC: 2

20 Nov 2012

5340-15-189-7692
Kit Fascetta

151897692
4/11690: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-121-2097
Dust And Moisture Seal Protective Plug

151212097
830775: RNCC: 3 | RNVC: 2

23 Oct 1995

5340-15-006-2548
Raschiatore Special

150062548
0-28863: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-006-2568
Guida Speciale

150062568
0-28864: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-142-0016
Resiliente

151420016
VZA-R-AV-U-300: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-064-7885
Padlock

150647885
193-0221/17: RNCC: 3 | RNVC: 2

1 Mar 1983

5340-15-151-2318
Threaded End Tensioning Tie Rod

151512318
00085693: RNCC: 3 | RNVC: 2

3 May 2000

5340-15-112-8389
Headless Grooved Rod

151128389
466860: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-222-2490
Ganci Sollevamento

152222490
030339: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-166-4821
Mensola Fischer Ner

151664821
1606: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-139-9522
Chiave Per Serratur

151399522
WA2R: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-112-7758
Collar

151127758
2471005: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-003-9081
Stand Base

150039081
182741051: RNCC: 3 | RNVC: 2
(241)A0199182741051: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-151-9634
Flangia

151519634
0-173690: RNCC: 3 | RNVC: 2

27 Jul 2000

5340-15-115-5442
Tamburo Con Albero

151155442
D0469149: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-149-3997
Door Assy

151493997
518-33-0230: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-153-7770
Morsetto (1) A Serr

151537770
06100A113270: RNCC: 5 | RNVC: 2
06100A113270: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-003-7496
Blocchetto Guida

150037496
CC0305210/6: RNCC: 3 | RNVC: 2
(241)A0147CC0305210/6: RNCC: 5 | RNVC: 2

20 Nov 2013

5340-15-118-6526
Threaded End Tensioning Tie Rod

151186526
70901763: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-112-3444
Double Angle Bracket

151123444
4837063: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-118-0065
Threaded End Tensioning Tie Rod

151180065
1P 550623: RNCC: 3 | RNVC: 2
1P 550623: RNCC: 5 | RNVC: 9

28 Jan 1995

5340-15-162-0439
Manual Control Lever

151620439
ZA 91018CR: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-115-5138
Emerg Bracket Sling

151155138
1730-0018-03: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-184-4990
Molla

151844990
1012-0503: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-155-0050
Connect Door Access

151550050
J52445001-402: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-15-062-6975
Cover

150626975
1/279649: RNCC: 3 | RNVC: 2
1279649: RNCC: 5 | RNVC: 2
9986762: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-135-7169
Guida

151357169
205-032-707-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-188-5200
Headless Straight Rod

151885200
FLC-DM1: RNCC: 3 | RNVC: 2
(241)AC839FLC-DM1: RNCC: 5 | RNVC: 2

30 Sep 2009

5340-15-169-3299
Lucchetto C.

151693299
F72010653: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-103-6951
Flangia Con Pioli

151036951
14332/B: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-195-7345
Tirante A Cerniera

151957345
178904781: RNCC: 3 | RNVC: 2
(241)A0199178904781: RNCC: 5 | RNVC: 2

3 May 2011

5340-15-061-2343
Rim Clen Clamp (1)

150612343
000200065100: RNCC: 5 | RNVC: 2
1200096-133000089: RNCC: 5 | RNVC: 2
000200065100: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-119-5386
Piastrina Sinistra

151195386
D0481799: RNCC: 3 | RNVC: 2

22 Mar 1995

5340-15-202-3339
Tappo Otturatore A

152023339
16988601: RNCC: 3 | RNVC: 2
(241)A424916988601: RNCC: 5 | RNVC: 2

28 Feb 2007

5340-15-232-3735
Piastre E Staffe Di

152323735
TF263SF: RNCC: 3 | RNVC: 2
534015E097463: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-213-8525
Elettroserratura A

152138525
961910902: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-194-0072
Half-Hinge Assembly

151940072
109-0641-51-105: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-145-0386
Piston

151450386
324C02304-101: RNCC: 3 | RNVC: 2

28 Mar 1997

5340-15-154-0607
Copri Accesso

151540607
03-06-1210-48: RNCC: 3 | RNVC: 2

19 Mar 2001

5340-15-160-8917
Lucchetto P.

151608917
F720091861: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-232-9574
Tassello In Nylon M

152329574
4830: RNCC: 3 | RNVC: 2
534015E065791: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-003-8733
Nut And Bolt Retainer

150038733
25093-82: RNCC: 3 | RNVC: 2
25093-82: RNCC: 5 | RNVC: 9

27 Oct 1985

5340-15-102-0686
Helical Compression Spring Seat

151020686
D5315007P: RNCC: 3 | RNVC: 2
D5315007P: RNCC: 5 | RNVC: 9

24 Nov 1992

5340-15-120-6809
Carena Portaboccola

151206809
D0487479: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-078-0842
Morsetto

150780842
TM01-63-86: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-145-1754
Lever

151451754
MOD-610M: RNCC: 3 | RNVC: 2
MOD-610M: RNCC: 5 | RNVC: 9
MOD-610M: RNCC: 5 | RNVC: 9

2 Jun 1997

5340-15-121-5088
Fermo Dado Normale

151215088
109-0406-96-103: RNCC: 3 | RNVC: 2

8 Jan 1996

5340-15-089-2080
Handwheel

150892080
2271-1-2743A3158-8V: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-231-1119
Serratura Elettrica

152311119
35120-955: RNCC: 3 | RNVC: 2
534015E078583: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-200-0666
Support

152000666
156583-1: RNCC: 3 | RNVC: 2

20 Sep 2005

5340-15-116-9945
Aube Sur Capotage

151169945
79038943: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-138-4077
Fermo

151384077
5411216: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-102-7084
Dust And Moisture Seal Protective Cap

151027084
95916000: RNCC: 3 | RNVC: 2

10 Aug 1987

5340-15-139-8056
Tirante Elastico

151398056
1001945: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-067-9488
Sportello Posterior

150679488
53.012: RNCC: 3 | RNVC: 2
53.012: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-154-9216
Hook

151549216
CBD70754P04: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-15-154-5009
Anodo Anticorrosion

151545009
2.2618-R2: RNCC: 3 | RNVC: 2
1P 543543: RNCC: 3 | RNVC: 2
1P 543543: RNCC: 5 | RNVC: 9

20 Jun 2001

5340-15-005-0513
Dust And Moisture Seal Protective Cap-Plug

150050513
0-28151: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-174-7470
Nastro300x0.05Cu-Et

151747470
53610-01/005: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-145-2550
Cap Right

151452550
541-14-1670: RNCC: 3 | RNVC: 2

23 Jun 1997

5340-15-205-7523
Assy Support

152057523
109-0407-93-101: RNCC: 3 | RNVC: 2

30 Mar 2012

5340-15-126-5197
Molla

151265197
R6-006-96: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-158-5240
Control Rod

151585240
263A1878-417: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-060-6028
Perno Chiavistello

150606028
26908-101C1: RNCC: 3 | RNVC: 2

7 Jun 1977

5340-15-006-2571
Tirante Speciale

150062571
0-33963: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-137-4453
Kit 4 Ruote Piroett

151374453
CKR: RNCC: 3 | RNVC: 2
CKR: RNCC: 5 | RNVC: 9

10 Oct 1996

5340-15-006-3642
Plug Espandable

150063642
120586: RNCC: 3 | RNVC: 2

26 Oct 1979

5340-15-179-0073
Support

151790073
RU 400 566: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-142-4243
Fascetta

151424243
M9419: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-177-6302
Carter Leg 3

151776302
36372: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-108-0780
Metal Runner

151080780
32-03-400: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-005-4072
Dust And Moisture Seal Protective Cap

150054072
2300-23510: RNCC: 3 | RNVC: 2
230023510: RNCC: 5 | RNVC: 2

20 Nov 1978

5340-15-170-8540
Lastra Gomma Espans

151708540
58121-03/007: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-180-2150
Flange

151802150
CFS 106 G: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-215-5632
Puntimetallicisicut

152155632
0493G-8: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-107-7432
Dust And Moisture Seal Protective Cap

151077432
8-869: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-005-5345
Rubber Bumper

150055345
1026-01-136: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-149-3994
Clamp

151493994
518-33-1300: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-179-8562
Extension Drawer Slide

151798562
ASN 43-300-108: RNCC: 3 | RNVC: 2

28 Sep 2007

5340-15-162-6293
Handle

151626293
MPS14-5: RNCC: 3 | RNVC: 2

7 Dec 2001

5340-15-118-6589
Rim Clen Clamp (1)

151186589
73122431: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-059-5025
Dust And Moisture Seal Boot

150595025
10.08.83.00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-118-8472
Dust And Moisture Seal Protective Plug

151188472
CA52215: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-007-0898
Leva Speciale

150070898
0-21751: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-052-0015
Morsetto Serratubi

150520015
B740-20-15: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-195-8996
Dust And Moisture Seal Protective Cap

151958996
67318-04/001: RNCC: 3 | RNVC: 2

24 May 2011

5340-15-188-8040
Speciale Pisatrina

151888040
552301247000: RNCC: 3 | RNVC: 2
(241)A1140552301247000: RNCC: 5 | RNVC: 2

19 Nov 2009

5340-15-199-8472
Anchor Strap

151998472
9CS3703056: RNCC: 3 | RNVC: 2
(241)A91729CS3703056: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-175-7731
Cilindro Yale Tipo

151757731
5210-58: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-166-4924
Staffa

151664924
93817441: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-185-9678
Ammortizzatore Per

151859678
AVAU7010D: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-155-7782
Rubber Bumper

151557782
723009014100: RNCC: 3 | RNVC: 2

25 Jun 2002

5340-15-115-2322
Upper Foot

151152322
518023290: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-176-8206
Tassello Di Nylon C

151768206
FU6X35V: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-109-8987
Puntale Attuatore V

151098987
467811: RNCC: 3 | RNVC: 2
D0467811: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-122-2019
Lame Gauche

151222019
D128618101: RNCC: 3 | RNVC: 2
D128618101: RNCC: 5 | RNVC: 2
D128618101: RNCC: 5 | RNVC: 2

25 Jun 1996

5340-15-151-6689
Leva

151516689
4750002: RNCC: 3 | RNVC: 2

22 Jun 2000

5340-15-115-7081
Braccio Per Leva Sp

151157081
D1401106: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-139-8518
Cerniera

151398518
3884051: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-163-2799
Dust And Moisture Seal Protective Cap Set

151632799
8965.003: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-147-6725
Supporto Manetta A

151476725
224A6019-407: RNCC: 3 | RNVC: 2

26 Feb 1998

5340-15-170-7478
Drive End Bracket S

151707478
6102312151: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-005-6890
Piastra Speciale

150056890
0-33826: RNCC: 3 | RNVC: 2

12 Aug 1979

5340-15-181-8274
Door Latch Assy 335

151818274
30017-A: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-134-2610
Tubazione D Staffa

151342610
4629925: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-154-8279
Gancio Fissaggio Ca

151548279
999-0500-57-2: RNCC: 3 | RNVC: 2

17 Oct 2001

5340-15-194-0012
Lock Door Assembly

151940012
109-0325-84-101: RNCC: 3 | RNVC: 2

12 Aug 2010

5340-15-105-9139
Headless Straight Rod

151059139
2107719: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-155-2957
Attacco Superiore C

151552957
60180186: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-107-6063
Serratura Compl

151076063
S6120-62132-942: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-206-2390
Engine Accessory Bracket

152062390
111138: RNCC: 3 | RNVC: 2
(241)A3593111138: RNCC: 5 | RNVC: 2

31 May 2012

5340-15-166-4994
Hinge Pin

151664994
216A0007007: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-122-1953
Dust And Moisture Seal Protective Cover

151221953
28009-30: RNCC: 3 | RNVC: 2
28009-30: RNCC: 5 | RNVC: 9

25 Jun 1996

5340-15-153-1600
Anello

151531600
W021281: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-15-166-4813
Serratura Da Infila

151664813
5261160: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-215-3889
Cilindro Mm.74 32-3

152153889
CILINDRO74MM.: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-067-3366
Anodo Protettivo

150673366
DIAM26MMLUN.126MMFIL.20X2,5: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-188-6434
Luggage Handle Cap

151886434
CBD71590P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71590P01: RNCC: 5 | RNVC: 2

20 Oct 2009

5340-15-181-3632
Hinge

151813632
20195065F: RNCC: 3 | RNVC: 2

9 Dec 2008

5340-15-074-4073
Turnbuckle

150744073
1B10UNI20180T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-005-6922
Piastrina Speciale

150056922
0-33649: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-148-9076
Corpo Filtro Olio C

151489076
4811854: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-15-220-0484
Turning Vanes Centr

152200484
S1-111: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-142-6616
Tirante

151426616
541-21-2030: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-154-2132
Complessivo Trasmis

151542132
SF260-13-586-05: RNCC: 3 | RNVC: 2

28 Mar 2001

5340-15-187-3272
Support

151873272
0611167: RNCC: 3 | RNVC: 2
(241)A32450611167: RNCC: 5 | RNVC: 2

16 Mar 2009

5340-15-005-6460
Coperchio Speciale

150056460
0-21119: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-186-2172
Lucchetto Piccolo C

151862172
LUCCHETTO20MM: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-118-0478
Piastra Collegament

151180478
D0488014: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-112-7859
Mounting Console

151127859
128: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-214-9755
Tassello Top 12

152149755
TOP12: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-230-5260
U Clamp

152305260
CV69956: RNCC: 3 | RNVC: 2
534015E152148: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-102-8833
Resilient Mount

151028833
88-920-512T5: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-053-5925
Pastiglia

150535925
45-1915-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-180-0988
Rinforzo

151800988
412-1110-30-105: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-141-9741
Resiliente

151419741
646C22-11-87TAV12POS1: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-111-3443
Anello Compl.

151113443
109-0110-86-1: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-190-9124
Fischer Ancore A So

151909124
1402: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-162-2688
Dust And Moisture Seal Protective Cover

151622688
540627: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-166-4769
Tassello 1 2 3

151664769
4346855: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-153-7266
Forcella Testa Di T

151537266
142041252: RNCC: 3 | RNVC: 2

22 Feb 2001

Load More Results