What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 58 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 58 of 72

5340-15-143-6379
Molla Valvolina Pom

151436379
1-02434-70: RNCC: 3 | RNVC: 2
NR2434: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-115-7047
Coperchietto Inferi

151157047
D0468385: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-166-5031
Bracket

151665031
311A2510004: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-0357
Prigioniero Filetta

151180357
D0469379: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-118-6047
Calotte

151186047
73133618: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-114-1330
Dust And Moisture Seal Protective Cap

151141330
04-0186-068: RNCC: 3 | RNVC: 2

2 Jun 1993

5340-15-144-8773
Electrical-Me Post

151448773
D3370-0000: RNCC: 5 | RNVC: 2
D3370-0000: RNCC: 5 | RNVC: 9

24 Jan 1997

5340-15-053-9455
Semicerniera Strutt

150539455
260-11-148-15: RNCC: 3 | RNVC: 2
260-11-148-15: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-170-8578
Lastra 544X358x1.6

151708578
58311-11/069: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-174-7452
Nastro Inox 0.4X35m

151747452
51560-01/006: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-218-3356
Lente Piccola

152183356
LI1604/2CU220: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-059-2951
Electronic Equipment Hardware Kit

150592951
21-116: RNCC: 3 | RNVC: 2

23 Jan 1976

5340-15-117-4907
Cerniera

151174907
29045-001A01: RNCC: 3 | RNVC: 2
29045-001A1: RNCC: 5 | RNVC: 2

27 Oct 1993

5340-15-154-2103
Tirante

151542103
0-169253: RNCC: 3 | RNVC: 2
(241)A39630-169253: RNCC: 5 | RNVC: 2
1PA39630-169253: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-007-2892
Sospensione Elastic

150072892
SF260-13-166-01: RNCC: 3 | RNVC: 2
SF260-13-166-01: RNCC: 5 | RNVC: 9

14 Mar 1980

5340-15-006-6507
Cap

150066507
20004-051-00: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-231-6683
Gabbia A Rulli

152316683
0-108249: RNCC: 3 | RNVC: 2
534015E158152: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-144-8423
Corrosion Preventive Anode

151448423
TG.086407TIPOA: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-102-8849
Headless Straight Rod

151028849
1Q526879: RNCC: 3 | RNVC: 2
1Q526879: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-178-8217
Nonmetallic Bumper

151788217
0.300.15042: RNCC: 3 | RNVC: 2
143769-156: RNCC: 5 | RNVC: 2

15 Dec 2005

5340-15-213-8626
Maniglia Premi-Apri

152138626
F13NE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-215-8852
Gancio Piegato Mm80

152158852
553181: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-147-4029
Flangia

151474029
67788-103B00: RNCC: 3 | RNVC: 2

11 Nov 1997

5340-15-149-6172
Seal

151496172
518-38-1960: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-220-0528
Distanz. Travi Tubo

152200528
S1-113B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-108-3474
Assieme Fascetta

151083474
66-4027-04: RNCC: 3 | RNVC: 2

2 May 1989

5340-15-154-1132
Double Angle Bracket

151541132
0-169979: RNCC: 3 | RNVC: 2
1PA39630-169979: RNCC: 5 | RNVC: 2
(241)A39630-169979: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-114-4051
Guida

151144051
212-1300-48-2: RNCC: 3 | RNVC: 2

19 May 1994

5340-15-231-7917
Piastra Di Base

152317917
UT/SA/0009/24: RNCC: 3 | RNVC: 2
534015E122765: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-158-2731
Support

151582731
99UJ04543298S01-401/014: RNCC: 3 | RNVC: 2

7 Jan 2004

5340-15-108-1057
Ausgleichsgew

151081057
X667-11: RNCC: 3 | RNVC: 2
X667-11: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-151-2834
Contol Rod

151512834
541-16-1540: RNCC: 2 | RNVC: 3
541161540: RNCC: 3 | RNVC: 2
554116154000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-144-6816
Tappo

151446816
V130-140100A: RNCC: 3 | RNVC: 2
V130140100A: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-186-0890
Catenaccio Portaluc

151860890
CATENACCIO-PORTALUCCH: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-106-7609
Staffetta

151067609
972430: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-114-8114
Protezione Verso Ma

151148114
RB30: RNCC: 3 | RNVC: 2

6 Aug 1992

5340-15-064-9016
Colonnette Complete

150649016
152981: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-15-170-8221
Supporto Per Allumi

151708221
340-0079/01.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-213-8857
Piastra Porta Serra

152138857
050-011: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-057-2894
Threaded End Tensioning Tie Rod

150572894
1376-08-118: RNCC: 3 | RNVC: 2
137608118: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-000-3265
Headless Straight Rod

150003265
9CD8330A172-401: RNCC: 3 | RNVC: 2

20 Feb 2013

5340-15-174-7529
Tondo Diam 6.00Mmpt

151747529
58215-01/004: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-192-6490
Fermaglio

151926490
B229442: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-147-3109
Stopper

151473109
302526: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-056-6042
Gancio Attacco Cord

150566042
15980: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-220-0479
Spessore Piastre 26

152200479
S1-91E: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-120-7126
Handwheel

151207126
555906035000: RNCC: 3 | RNVC: 2
559-06-0350: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-156-8886
Impugnatura Isolant

151568886
423-368: RNCC: 3 | RNVC: 2

10 Mar 2003

5340-15-151-2709
Roof Rack Clamp

151512709
8854126-141: RNCC: 3 | RNVC: 2

4 May 2000

5340-15-005-1082
Cover Plate Access

150051082
1137-10-138: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-151-7765
Guida Scorrim.

151517765
0-103449: RNCC: 3 | RNVC: 2
(241)A39630-103449: RNCC: 5 | RNVC: 2
1PA39630-103449: RNCC: 5 | RNVC: 2

10 Jul 2000

5340-15-139-9305
Albero Con Supporto

151399305
K313SG: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-007-5015
Nonrotating Shaft Eye Bracket

150075015
1239-01-021: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-105-6348
Collare Serraggio

151056348
5086-04-16: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-206-2977
Nos Locking Handle

152062977
324AM06100-002: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-100-7039
Fascetta Complessiv

151007039
808-82811-11-12: RNCC: 3 | RNVC: 2

1 Jul 1987

5340-15-209-1210
Latch

152091210
015-3134-030: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-199-5285
Mensola Per Passere

151995285
8587-47838: RNCC: 3 | RNVC: 2

14 Apr 2005

5340-15-056-7066
Nut And Bolt Locking Plate

150567066
1127-02-322: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-001-2036
Sliding Block

150012036
129-B171-06-045: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-15-074-4412
Turnbuckle

150744412
2A6UNI20210T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-202-2306
Rod

152022306
233A1003-003: RNCC: 3 | RNVC: 2
(241)A0019233A1003-003: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-15-105-1185
Porta Pomello

151051185
417/IC/III-18.02.53-12-US: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-206-2807
Utility Resilient Mount

152062807
VZA-R-AVU-40: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-116-1115
Manual Control Lever

151161115
DPR29494/1-26-61: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-151-9834
Piastra

151519834
0-153349: RNCC: 3 | RNVC: 2
00153349: RNCC: 3 | RNVC: 2
(241)A396300153349: RNCC: 5 | RNVC: 2
(241)A39630-153349: RNCC: 5 | RNVC: 2

31 Jul 2000

5340-15-111-5968
Extention

151115968
A12176-01-08: RNCC: 3 | RNVC: 2
A12176-01-08: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-127-4011
Fermaglio

151274011
1740-60-023: RNCC: 3 | RNVC: 2
1740-60-023: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-060-1747
Turnbuckle

150601747
20827-001: RNCC: 3 | RNVC: 2

20 Jan 1977

5340-15-231-9326
Staffa Fissaggio

152319326
98420236: RNCC: 3 | RNVC: 2
534015E137188: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-141-4417
Anodo

151414417
W015558: RNCC: 3 | RNVC: 2
(7001)5340151414417: RNCC: 5 | RNVC: 2

9 Jun 1997

5340-15-113-9699
Supportospeciale

151139699
262A1239-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-122-1366
Deflector

151221366
A-39579-001: RNCC: 3 | RNVC: 2
A39579-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-199-5879
Anello

151995879
M2AAM90S/24: RNCC: 3 | RNVC: 2
(241)A5205M2AAM90S/24: RNCC: 5 | RNVC: 2

4 May 2005

5340-15-162-3628
Snap Hook

151623628
310-01: RNCC: 3 | RNVC: 2
133064/1: RNCC: 5 | RNVC: 2
10-57: RNCC: 5 | RNVC: 2

16 Jul 2001

5340-15-101-4532
Turnbuckle Body

151014532
109-0110-58-1: RNCC: 3 | RNVC: 2

2 Dec 1986

5340-15-166-4933
Staffa

151664933
98425990: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-204-0458
Connector Standard

152040458
C160001000: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-15-220-0515
Lam. Elcom Sys Lg45

152200515
S1-145I: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-198-9128
Handwheels Assy

151989128
26HJ04143051S01-469: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-15-218-2413
Confezione Linguett

152182413
DT3931: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-068-1841
Seggio Valvola Spec

150681841
474201: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-116-8609
Coperchio Con Guarn

151168609
D1302609: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-116-9260
Poignee

151169260
M243-140: RNCC: 3 | RNVC: 2
91634840: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-15-005-2361
Clamp

150052361
649-412-351-0: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-110-3727
Schutzkappe

151103727
F304C3A-37: RNCC: 3 | RNVC: 2
F304C3A-37: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-109-6136
Shock Mount Pad

151096136
518348-01: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-120-5587
Half Hinge

151205587
109-0370-16-12: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-150-4938
Cerniera Speciale

151504938
129-0380-09-101: RNCC: 3 | RNVC: 2

22 Nov 1999

5340-15-194-2230
Sealing Plug Assembly

151942230
159887-1: RNCC: 3 | RNVC: 2
(241)A0076159887-1: RNCC: 5 | RNVC: 2

11 Oct 2010

5340-15-105-8186
Sostegno Elastico

151058186
5086-03-35: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-117-2615
Electrical-Me Post

151172615
142502115: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-163-3971
Runner

151633971
9842257: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-150-5887
Assieme Struttura

151505887
A37740-01-07: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-148-8757
Assieme Attrezzatur

151488757
2401-0030-001: RNCC: 3 | RNVC: 2

20 Oct 1998

5340-15-054-0764
Semicerniera

150540764
260-18-12-10: RNCC: 3 | RNVC: 2
260-18-12-10: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-188-4358
Small Block

151884358
P-893036-001: RNCC: 3 | RNVC: 2

14 Sep 2009

5340-15-136-7810
Fascetta

151367810
212-062-717-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-007-3311
Anchor Strap

150073311
1127-37-202: RNCC: 3 | RNVC: 2
112737202: RNCC: 5 | RNVC: 2

6 Jul 2000

5340-15-177-6303
Horizontal Lock Ass

151776303
36725: RNCC: 3 | RNVC: 2

4 Jun 2004

5340-15-064-5216
Frame

150645216
6-209-025: RNCC: 3 | RNVC: 2

30 Jul 1984

5340-15-170-8327
Maniglia Di Estrazi

151708327
341-0175/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-005-6711
Handwheel

150056711
1137-17-104: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-182-6225
Setti Di Chiusura

151826225
095765005: RNCC: 3 | RNVC: 2
SIV/CVTN: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-194-1815
Spacing Threaded Standoff

151941815
210F503-6700-02: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-15-057-7513
Nut And Bolt Locking Plate

150577513
1276-05-397: RNCC: 3 | RNVC: 2
127605397: RNCC: 5 | RNVC: 2

31 Dec 1975

5340-15-117-7263
Control Rod

151177263
142502172: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-203-5099
Assieme Asta

152035099
277A6479-401: RNCC: 3 | RNVC: 2
(241)A2142277A6479-401: RNCC: 5 | RNVC: 2

12 Feb 2008

5340-15-111-3802
Threaded End Tensioning Tie Rod

151113802
231A1272-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-052-1675
Control Rod

150521675
523-12-12B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-006-6522
Plug And Va

150066522
20007A71-02: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-153-5020
Half Hinge

151535020
J57140701-001: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-134-4035
Staffa

151344035
8818133: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-145-0422
Joint Sleeve

151450422
324C01630-101: RNCC: 3 | RNVC: 2

28 Mar 1997

5340-15-116-2015
Helical Compression Spring Retainer

151162015
1420-02-124: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-15-212-1008
Chiavi Grezze

152121008
CHIAVE 058: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-170-9288
Vary Hardware

151709288
23931000003: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-065-1161
Semiblocchetto

150651161
A1-53066-001: RNCC: 3 | RNVC: 2
A1-53066-001: RNCC: 5 | RNVC: 9

19 Sep 1984

5340-15-197-7324
Helicoil Insert

151977324
OZ-245811: RNCC: 3 | RNVC: 2
OZ-245811: RNCC: 5 | RNVC: 2

22 Apr 2004

5340-15-114-7900
Mechanical Drive Housing

151147900
8932.10.01: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-059-3758
Snap Hook

150593758
1971-109: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-111-5960
Holder

151115960
A05582-01-20: RNCC: 3 | RNVC: 2
A05582-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-231-7911
Paracolpo Posterior

152317911
UT/SA/0009/11: RNCC: 3 | RNVC: 2
534015E122759: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-009-9809
Cover Plate Access

150099809
1236-06-113: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-194-3908
Support

151943908
109-0886-47-107: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-005-5395
Rim

150055395
85A-1040: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-103-1046
Maniglia Fermo

151031046
DE013.13.509: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-155-9659
Sostegno Elastico

151559659
500326922: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-15-001-9129
Rod End

150019129
411A2061-001: RNCC: 3 | RNVC: 2

19 Jul 2013

5340-15-062-4111
Anchor Strap

150624111
074028 W: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-059-4579
Scodellino Molla

150594579
10-03-80-00: RNCC: 3 | RNVC: 2

10 Apr 1975

5340-15-074-4209
Turnbuckle

150744209
2B8UNI20190T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-006-9653
Asta Speciale

150069653
39A506-31-30-09: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-219-7425
Matassa Filo Per Fr

152197425
MATASSA-FILO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-053-5991
Guarnizione

150535991
45-3235-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-6830
Asta Sfogo Aria

151206830
D0486843: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-121-1824
Shock Mount Pad

151211824
GA5: RNCC: 3 | RNVC: 2

31 Jan 1996

5340-15-000-4934
Lock-Release Lever

150004934
13HJ04643228S01-409-004: RNCC: 3 | RNVC: 2

11 Mar 2013

5340-15-007-0736
Fascetta Speciale

150070736
0-02302: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-147-9617
Staffa Ancoraggio

151479617
P3383POS.2: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-15-118-0390
Tubetto In Ferro E

151180390
D0484580: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-120-4558
Assiemestaffetta

151204558
A145378-1: RNCC: 3 | RNVC: 2

29 May 1995

5340-15-101-7432
Piastra Forata

151017432
P3: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-188-9912
Plug Assembly

151889912
GM/T2GB/SPL/2: RNCC: 3 | RNVC: 2

13 Jan 2010

5340-15-116-0005
Guida Frizione

151160005
A23794-30: RNCC: 3 | RNVC: 2

15 Feb 1993

5340-15-195-0157
Ext Protection Assy

151950157
CBD71187G02: RNCC: 3 | RNVC: 2
(241)A3460CBD71187G02: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-153-7151
Line Supporting Strap

151537151
142024031: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-110-3958
Blocchetti

151103958
14202985: RNCC: 3 | RNVC: 2
ZF14202985: RNCC: 5 | RNVC: 2
14202985: RNCC: 5 | RNVC: 2
6992-04: RNCC: 5 | RNVC: 2
ZF14202985: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-113-4837
Cernierainferiore

151134837
312A6467-001: RNCC: 3 | RNVC: 2

29 Jun 1991

5340-15-166-5143
Fascetta Serracavo

151665143
178484: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-008-6122
Pad Eye

150086122
4694831: RNCC: 3 | RNVC: 2
4694834: RNCC: 5 | RNVC: 2

27 Mar 1981

5340-15-006-2552
Guida Speciale

150062552
0-33766: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-127-6822
Molla Valvola

151276822
4029002: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-147-5804
T-Fitting

151475804
98RV959: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-166-4992
Hinge Half Rh

151664992
212A7106002: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-191-6231
Band Clamp

151916231
425C75-1040M: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-041-2415
Fascetta

150412415
7-4411-2-00-28325-6: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-117-5296
Resilient Mount

151175296
98103470: RNCC: 3 | RNVC: 2

8 Nov 1993

5340-15-103-1959
Control Rod

151031959
DE013.13.443: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-191-5370
Lucchetto Da Mm 70

151915370
LUCCHETTOMM70: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-063-5946
Rubber Bumper

150635946
4380549: RNCC: 3 | RNVC: 2
4380549: RNCC: 5 | RNVC: 9

13 Nov 1982

5340-15-139-7810
Chiavistello

151397810
1000512: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-219-5084
Portello Palo Ill.

152195084
SMV-89-101: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-009-5657
Double Angle Bracket

150095657
FL1043-101: RNCC: 3 | RNVC: 2

2 Dec 1980

5340-15-189-4996
Collare

151894996
4481-581SH: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-149-0611
Tampone Ammortizzat

151490611
970411: RNCC: 3 | RNVC: 2
(241)A3593970411: RNCC: 5 | RNVC: 2

23 Nov 1998

5340-15-119-8580
Hinge

151198580
0815-05480: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-174-7600
Con.Clip Bar

151747600
67173-01/003: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-109-5308
Dust And Moisture Seal Protective Plug

151095308
GB488-008-000: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-152-3619
Piastrina

151523619
0-153384: RNCC: 3 | RNVC: 2
00153384: RNCC: 3 | RNVC: 2
(241)A39630-153384: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-154-6090
Base (1) Per Sosteg

151546090
157618206: RNCC: 2 | RNVC: 3

26 Jul 2001

5340-15-222-0621
Serratura Da Infila

152220621
7431.50.2.000: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-056-6620
Semicerniera Compl

150566620
204-1140-34-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-002-7719
Bracket

150027719
4235081-00: RNCC: 3 | RNVC: 2

1 Oct 2013

5340-15-119-8176
Posizionatore

151198176
D0469721: RNCC: 3 | RNVC: 2
469721: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-122-2620
Verrou Barillet

151222620
800034035: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-059-1024
Dispositivo Bloccag

150591024
204-6900-51-9: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-232-9011
Gancio Per Pannello

152329011
0388: RNCC: 3 | RNVC: 2
534015E120459: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-114-3149
Molla Di Azionament

151143149
CF409004: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-163-4582
Headless Straight Rod

151634582
17H-329A01000-013-114: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-170-5739
Clamp

151705739
805-4020-008: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-001-7222
Anello Di Riduzione

150017222
01-07-116-4/B-B1: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-114-3176
Coperchio

151143176
CF431466: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-061-8029
Complessivo Tappi

150618029
5340-0002: RNCC: 3 | RNVC: 2

7 Oct 1983

5340-15-148-7091
Clamp

151487091
39A728-12-05-02A: RNCC: 3 | RNVC: 2

28 Sep 1998

5340-15-170-3798
Clip

151703798
206-075-301-3: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-194-3910
Reinforcement

151943910
109-0371-47-118: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-198-6609
Corrosion Preventive Anode

151986609
DN65-DE76.1: RNCC: 3 | RNVC: 2

25 Oct 2004

5340-15-117-6381
Turnbuckle Body

151176381
142502189: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-149-2890
Control Rod

151492890
4860644: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-110-2796
Bracket Ang

151102796
P125384-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-122-1963
Dus Protective Plug

151221963
109-8101-48-103: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-157-9810
Hinge Half

151579810
J94345332-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-151-7083
Staffa

151517083
0-176128: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-116-7965
Piastrina Di Blocca

151167965
DPR24136/1-18: RNCC: 3 | RNVC: 2

29 Nov 1993

5340-15-009-3861
Maniglia Sx

150093861
206-9203-02-1: RNCC: 3 | RNVC: 2

22 Jun 1981

5340-15-195-3304
Tappo Per Accoppiat

151953304
Z/MC70-01: RNCC: 3 | RNVC: 2
(241)A4621Z/MC70-01: RNCC: 5 | RNVC: 2

15 Mar 2011

5340-15-185-4665
Tasselle A Rete Fip

151854665
15X85R: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-101-7761
Corrosion Preventive Anode

151017761
A2-PN10-M30: RNCC: 3 | RNVC: 2
1G-A2/375/162/2/0: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-058-4025
Threaded End Tensioning Tie Rod

150584025
553808105000: RNCC: 2 | RNVC: 3
538-08-1050: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-139-7154
Riscontro Slittone

151397154
A.0703400: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-139-8055
Tirante Elastico

151398055
1001944: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-162-0171
Cover

151620171
D7615.0000: RNCC: 5 | RNVC: 2
D7615.0000: RNCC: 5 | RNVC: 9

15 Nov 2000

5340-15-127-7562
Molla Richiamo Fren

151277562
60055878: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-007-5002
Cover Plate Access

150075002
1239-01-226: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-232-9069
Arpione Con Leva

152329069
800.006/21: RNCC: 3 | RNVC: 2
534015E074555: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-178-9884
Plate

151789884
RS 301 800 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-055-6600
Staffa Sostegno Tra

150556600
546185: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-020-1624
Squadra Appoggio Qu

150201624
01-231A27: RNCC: 3 | RNVC: 2
55.11.034.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-053-7265
Anello Elastico Rit

150537265
644283: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-150-3744
Gancio Avionico

151503744
42X-117P102: RNCC: 5 | RNVC: 2
42X-117P102: RNCC: 5 | RNVC: 9

6 Oct 1999

5340-15-102-3373
Gage De Frein

151023373
441/003.0/0000: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-132-9429
Ghiera

151329429
9-3115-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-180-1597
Nut And Bolt Locking Plate

151801597
6320055: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-198-5564
Double Angle Bracket

151985564
4111T07G01: RNCC: 3 | RNVC: 2
(241)A33444111T07G01: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-15-116-0554
Helical Compression Spring Seat

151160554
1P 236227: RNCC: 3 | RNVC: 2
1P 236227: RNCC: 5 | RNVC: 9

15 Dec 1993

5340-15-155-4948
Sealing Plug Assembly

151554948
CBD71131P01: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-149-3091
Multiple Angle Bracket

151493091
4885742: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-067-9511
Sportello Laterale

150679511
53.336: RNCC: 3 | RNVC: 2
53.336: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-104-3126
Copiglia Elastica

151043126
2115269: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-181-0239
Supporto Per Displa

151810239
ID/SUMOSE-SMD01: RNCC: 3 | RNVC: 2
(241)A1189ID/SUMOSE-SMD01: RNCC: 5 | RNVC: 2

26 Sep 2008

5340-15-117-0428
Padlock

151170428
201.40: RNCC: 3 | RNVC: 2
65/40 MM: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-15-148-1648
Dust Protective Cap

151481648
GB 645 640 651: RNCC: 3 | RNVC: 2

1 Jul 1998

5340-15-186-2312
Elettroserratura Om

151862312
ART.388: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-147-5461
Stop

151475461
A-C128454-1/2-3: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-178-9874
Suppor Assembly

151789874
RS 201 102 -U: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-216-1758
Ganci X Attrezzi

152161758
4143: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-005-6912
Tappo Speciale

150056912
0-33640: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-064-1795
Rim Clen Clamp (1)

150641795
543295001F: RNCC: 3 | RNVC: 2

21 Feb 1983

5340-15-062-9242
Double Angle Bracket

150629242
0-101587: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-052-0182
Morsetto Serratubi

150520182
M740-20-13: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-166-4789
Clamp Loop

151664789
MS21919WDG35: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-058-6061
Cerniera Ad Incasso

150586061
1971-69-16: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-121-2531
Pattino

151212531
309-4850-00: RNCC: 3 | RNVC: 2

2 Nov 1995

5340-15-114-7741
Rocker Cover Front

151147741
560.2125.093: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-101-8569
Resilient Mount

151018569
781102: RNCC: 3 | RNVC: 2

1 Sep 1987

5340-15-105-5984
Staffa A Gomito

151055984
4980938: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-152-6432
Staffa

151526432
0-153641: RNCC: 3 | RNVC: 2

3 Oct 2000

5340-15-153-7645
Base (1) Per Sosteg

151537645
000203099100: RNCC: 5 | RNVC: 2
000203099100: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-147-0306
Anello Di Rivestime

151470306
4.69.50.37.: RNCC: 3 | RNVC: 2
4695024: RNCC: 3 | RNVC: 2

27 Mar 2004

5340-15-209-0780
Ancore Fischer Kd P

152090780
KDV4: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-141-6734
Anodo

151416734
4/11322: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-136-2840
Staffa

151362840
8460745: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-148-4976
Headless Straight Rod

151484976
98458043: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-151-6007
Double Angle Bracket

151516007
2492639: RNCC: 3 | RNVC: 2

19 Jun 2000

5340-15-177-4269
Manual Control Handle

151774269
049434: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-068-1875
Nut And Bolt Locking Plate

150681875
476910: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-121-7961
Shock Mount Pad

151217961
704 A 100.50: RNCC: 3 | RNVC: 2
142520273: RNCC: 5 | RNVC: 2

21 Feb 1996

5340-15-075-7501
Handwheel

150757501
7: RNCC: 3 | RNVC: 2

1 May 1981

5340-15-064-8973
Prolunga Per Manove

150648973
17899: RNCC: 3 | RNVC: 2

6 Mar 1984

5340-15-106-3262
Staffa

151063262
1367762: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-187-5345
Screw Thread Insert

151875345
61580-25/002: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-001-7991
Dust And Moisture Seal Protective Cap

150017991
500421135: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-187-6433
Box(Lh)

151876433
109-0362-25-203: RNCC: 3 | RNVC: 2
(241)A0126109-0362-25-203: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-008-1819
Resilient Mount

150081819
60114334: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-166-5131
Serratura Infilare

151665131
SRTINFMM45240: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-006-2618
Asta Speciale

150062618
0-33970: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-151-7089
Staffa

151517089
0-177654: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-219-7420
Cilindro Cm.8

152197420
6000080: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-100-8072
Ritegno Parabrezza

151008072
109-0310-27-21: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-137-2967
Tampone

151372967
204-030-291-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-007-8433
Rubber Bumper

150078433
4977098: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-205-5493
Manual Control Lever

152055493
182702136: RNCC: 3 | RNVC: 2
(241)A0199182702136: RNCC: 5 | RNVC: 2

19 Mar 2012

5340-15-007-2628
Nut And Bolt Locking Plate

150072628
1388538: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-005-5164
Resilient Mount

150055164
4127208: RNCC: 3 | RNVC: 2
4127208: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-180-5120
Anello Per Chiave

151805120
195597337: RNCC: 3 | RNVC: 2
(241)A0199195597337: RNCC: 5 | RNVC: 2

10 Jun 2008

5340-15-074-4338
Turnbuckle

150744338
2B52UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-003-3758
Double Angle Bracket

150033758
98411509: RNCC: 3 | RNVC: 2

5 Nov 2013

5340-15-008-9959
Resilient Mount

150089959
204-031-927-1007: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-187-8828
Support

151878828
878 94: RNCC: 3 | RNVC: 2

19 May 2009

5340-15-121-9053
Piastra Speciale Co

151219053
142505227: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-120-3564
Access Door

151203564
60175963: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-207-4192
Dust And Moisture Seal Protective Cap

152074192
98472662: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-108-8407
Double Angle Bracket

151088407
02092: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-212-5740
Cassetta Portachiav

152125740
ANT0112: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-151-4589
Fissaggio Cesoia Da

151514589
UOHF0120000: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-162-5648
Porta Molla

151625648
210209-02: RNCC: 3 | RNVC: 2

16 Oct 2001

5340-15-005-2878
Bracket Cable

150052878
ABS0355-02: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-105-4930
Cinghia Puntalino

151054930
1/10750-01.08.75-06: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-8727
Helical Compression Spring Seat

151128727
758922: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-108-2092
Assembled Nut Retainer

151082092
485458: RNCC: 3 | RNVC: 2
D0485458: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-193-7052
Headless Straight Rod

151937052
9911190345: RNCC: 3 | RNVC: 2

2 Jul 2010

5340-15-112-8304
Headless Grooved Rod

151128304
467140: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-002-8030
Utility Resilient Mount

150028030
5428600: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-110-5638
Helical Compression Spring Retainer

151105638
1P 289511: RNCC: 3 | RNVC: 2
1P 289511: RNCC: 5 | RNVC: 9

6 Apr 1996

5340-15-121-5643
Control Rod

151215643
1Q 544243: RNCC: 3 | RNVC: 2
1Q 544243: RNCC: 5 | RNVC: 9

12 Sep 1996

5340-15-187-6317
Bumper

151876317
504088204: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-108-5422
Nut And Bolt Locking Plate

151085422
65530130: RNCC: 3 | RNVC: 2

25 May 1989

5340-15-149-0630
Tampone Ammortizzat

151490630
970797: RNCC: 3 | RNVC: 2

23 Nov 1998

5340-15-112-7584
Conn.Rod Bolt

151127584
91770109: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-163-3003
Hebel

151633003
5200.413: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-125-3482
Blocchetto Fissaggi

151253482
7544349: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-113-9710
Attaccoganciodisoll

151139710
411A1505-001: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-136-0322
Tassello

151360322
5983764: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-103-8701
Helical Compression Spring Seat

151038701
4749396: RNCC: 3 | RNVC: 2
(7001)5340151038701: RNCC: 5 | RNVC: 2
A060017-006: RNCC: 5 | RNVC: 2

30 Mar 1988

5340-15-102-8757
Resilient Mount Plate

151028757
1Q574847: RNCC: 3 | RNVC: 2
1Q574847: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-001-8017
Dust And Moisture Seal Protective Cap

150018017
5949783317: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-122-2828
Protecton Amort

151222828
800059473: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-127-3015
Molla

151273015
816159: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-103-4294
Bush

151034294
276660ART23: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-1985
Occhio Guida Chiavi

151201985
211A7116-002: RNCC: 3 | RNVC: 2

31 Jan 1995

5340-15-153-9768
Sealing Plug Assembly

151539768
067957: RNCC: 3 | RNVC: 2

13 Mar 2001

5340-15-186-8993
Sealing Plug Assembly

151868993
066344: RNCC: 3 | RNVC: 2
0014783: RNCC: 5 | RNVC: 2
066344: RNCC: 5 | RNVC: 9

5 Jan 2009

5340-15-113-7099
Helical Compression Spring Seat

151137099
8121494: RNCC: 3 | RNVC: 2

10 Feb 1992

5340-15-100-8292
Helical Compression Spring Retainer

151008292
21680012A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-077-5573
Control Rod

150775573
116558-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-213-0965
Serratura Antipanic

152130965
59143-1: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-187-1969
Elemento Fisso Cine

151871969
SC 100 723: RNCC: 3 | RNVC: 2
(241)A3980SC100723: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-113-2405
Staffacomplessivo

151132405
261A2026-401: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-113-2526
Complessivo Flangia

151132526
375A4015-403: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-179-4361
Dust And Moisture Seal Protective Cap

151794361
46200562: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-134-3213
Leva Comando

151343213
S16024: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-134-4923
Staffa Sx

151344923
4410102: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-114-3561
Dust And Moisture Seal Protective Plug

151143561
5216-224-10: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-121-7472
Double Angle Bracket

151217472
740415: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-188-2791
Dust And Moisture Seal Protective Cap

151882791
46200851: RNCC: 3 | RNVC: 2

1 Sep 2009

5340-15-001-8833
Anello Antiestrusio

150018833
61701024: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-186-4071
Gancio Per Sollevam

151864071
5109A5A: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-206-8516
Co-Ordinating Arm

152068516
21310109: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-118-0318
Coperchio Superiore

151180318
D0467449: RNCC: 3 | RNVC: 2

15 Nov 1994

5340-15-179-8075
Fill Whip

151798075
SC000460: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-118-0494
Supporto Flangiato

151180494
D1401665: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-118-0832
Linear Actuating Cylinder Cap

151180832
D0484581: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-215-0500
Fischer

152150500
01995: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-149-3416
Spazzola

151493416
60152417: RNCC: 3 | RNVC: 2
142097413: RNCC: 8 | RNVC: 2
142097417: RNCC: 8 | RNVC: 2

2 Feb 1999

5340-15-104-8921
Fissaggio Gaffetta

151048921
22980: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-113-8632
Threaded End Tensioning Tie Rod

151138632
1Q 530752: RNCC: 3 | RNVC: 2
1Q 530752: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-057-8930
Nut And Bolt Locking Plate

150578930
P44EN4: RNCC: 5 | RNVC: 2
P44EN4: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-061-0051
Helical Compression Spring Seat

150610051
13535: RNCC: 3 | RNVC: 2

31 Mar 1976

5340-15-170-3707
Rod End

151703707
206-061-719-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-148-1427
Control Rod

151481427
4A43462D03: RNCC: 3 | RNVC: 2
4A43462D03: RNCC: 3 | RNVC: 2
93160060: RNCC: 5 | RNVC: 2

4 Aug 1999

5340-15-112-9449
Supportoperpompaoli

151129449
20530463A: RNCC: 3 | RNVC: 2

20 Apr 1996

5340-15-121-6617
Barillet B V

151216617
800054794: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-120-8464
Bracket

151208464
301532/2: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-199-1975
Multiple Angle Bracket

151991975
W005021600: RNCC: 3 | RNVC: 2

6 Feb 2005

5340-15-134-2606
Cerniera

151342606
4633748: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-105-6354
Collare Serraggio

151056354
10115301: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-006-1264
Resilient Mount

150061264
04955094: RNCC: 3 | RNVC: 2
4955094: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-148-7022
Ingrassatore

151487022
N102001511: RNCC: 3 | RNVC: 2

22 Oct 1998

5340-15-202-7821
Protect Blank Panel

152027821
N651U3126201: RNCC: 3 | RNVC: 2
(241)A0126N651U3126201: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-15-204-7317
Adattatore Per Trip

152047317
M0004069: RNCC: 3 | RNVC: 2
(241)A0810M0004069: RNCC: 5 | RNVC: 2

19 Dec 2011

5340-15-104-8875
Fissaggio Gaffetta

151048875
4512056: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-106-1999
Filo Metallico

151061999
970390: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-157-3915
Half-Hinge

151573915
190909370: RNCC: 2 | RNVC: 3

4 Jul 2003

5340-15-120-6834
Ghiera Di Bloccaggi

151206834
D0486676: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-169-5720
Padlock

151695720
F72015308: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-193-6685
Dust And Moisture Seal Protective Plug

151936685
163147114: RNCC: 3 | RNVC: 2
(241)A0199163147114: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-009-3331
Corpo Chiavistello

150093331
P884053-001: RNCC: 3 | RNVC: 2

12 Sep 1980

5340-15-155-0053
Connect Door Access

151550053
J52445003-401: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-15-203-9653
Tampone Ammortizzat

152039653
979-20 (DIN 906): RNCC: 3 | RNVC: 2
(241)A486758302357: RNCC: 5 | RNVC: 2
58302357: RNCC: 5 | RNVC: 2

29 Jul 2011

5340-15-062-5096
Arresto A Piastrina

150625096
P894817-005: RNCC: 3 | RNVC: 2

25 Jan 1982

5340-15-222-2258
Distanziale Montant

152222258
S1-143A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-064-2477
Handwheel

150642477
27-159-61: RNCC: 3 | RNVC: 2

28 Feb 1984

5340-15-149-4345
Dashpot

151494345
52611-S10-A01: RNCC: 3 | RNVC: 2

1 Mar 1999

5340-15-203-1755
Rod

152031755
J28040675-001: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-111-4584
Terminal

151114584
275A2342-005: RNCC: 3 | RNVC: 2

6 Dec 1990

5340-15-202-6587
Accoppiatore Psu

152026587
CF843448AE: RNCC: 3 | RNVC: 2
(241)A1508CF843448AE: RNCC: 5 | RNVC: 2

12 Jun 2007

5340-15-153-1047
Morsetto Cbd

151531047
E0117G174: RNCC: 3 | RNVC: 2

22 Nov 2000

5340-15-205-7085
Piastrina Protezion

152057085
5387.PM.08.0187: RNCC: 3 | RNVC: 2
DE013.26.963: RNCC: 3 | RNVC: 2
(241)A53875387.PM.08.0187: RNCC: 5 | RNVC: 2

28 Mar 2012

5340-15-056-5954
Staffa

150565954
13992: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-8823
Anello Di Spallamen

150018823
60502017: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-154-1758
Pignone

151541758
130321: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-103-0986
Extension Drawer Slide

151030986
DE013.12.215: RNCC: 3 | RNVC: 2
(241)A5015DE013.12.215: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-051-2803
Nut And Bolt Locking Plate

150512803
646753: RNCC: 3 | RNVC: 2
646753: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-203-6528
Dust And Moisture Seal Protective Cap

152036528
007221327AS: RNCC: 3 | RNVC: 2

24 Jun 2011

5340-15-057-2764
Electrical-Me Post

150572764
1127-42-158: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-007-3454
Tappo Speciale

150073454
0-30354: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-166-5072
Adapter Ass

151665072
20381001: RNCC: 3 | RNVC: 2
20381001: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-162-0330
Eye End

151620330
291A08040-103: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-052-1080
Control Rod

150521080
523-12-14B: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-065-4792
Attacco Assieme

150654792
4028-20-009: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-187-6373
Dust And Moisture Seal Protective Cap

151876373
902108: RNCC: 3 | RNVC: 2

15 Apr 2009

5340-15-118-7734
Helical Compression Spring Seat

151187734
4780559: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-237-3380
Tassello In Plastic

152373380
11460406: RNCC: 3 | RNVC: 2
534015E120584: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-147-5775
Dissel

151475775
982150211: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-102-8079
Testa Di Tirante Fi

151028079
232A1987-405: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-062-9392
Ghiera Speciale

150629392
0-100265: RNCC: 3 | RNVC: 2

21 Mar 1982

5340-15-166-5229
Isolant Protection

151665229
PL50P10TB29: RNCC: 3 | RNVC: 2
PL50P10TB29: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-058-6743
Doppio Cilinro Di

150586743
1971-036DS: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-195-5159
Metallic Solid Wheel

151955159
200015007.00120: RNCC: 3 | RNVC: 2
(241)A6114200015007.00120: RNCC: 5 | RNVC: 2

31 Mar 2011

5340-15-193-0753
Angle Bracket

151930753
A414A03V218A1: RNCC: 3 | RNVC: 2
(241)A0126A414A03V218A1: RNCC: 5 | RNVC: 2

12 Apr 2010

5340-15-114-3514
Nut And Bolt Locking Plate

151143514
DE51224-1: RNCC: 3 | RNVC: 2
DE51224-1: RNCC: 5 | RNVC: 9

14 Nov 1992

5340-15-169-6142
Lucchetto C.

151696142
F72015700: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-135-9886
Tassello Elastico

151359886
8551800: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-210-3761
Raccordo Per Fanale

152103761
301604831: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-174-7464
Esagono Ott.6P-Ot58

151747464
53240-12/007: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-107-0688
Coperchio Di Access

151070688
B18-02: RNCC: 3 | RNVC: 2
0111076: RNCC: 5 | RNVC: 2

20 Sep 1991

5340-15-116-9867
Left Hinge Kit

151169867
9AA2002A011-201: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-135-6034
Fascetta

151356034
66-047-04: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-7109
Maschera Per Dicitu

151157109
D1401072: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-144-9797
Runner

151449797
10101292: RNCC: 3 | RNVC: 2

26 Feb 1997

5340-15-000-2055
Packaging Container Fastener

150002055
114914: RNCC: 3 | RNVC: 2

8 Feb 2013

5340-15-118-5500
Corrosion Preventive Anode

151185500
D1404405: RNCC: 3 | RNVC: 2

26 Jan 1995

5340-15-206-8489
Sliding Door Track Bracket

152068489
9817 6967: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-115-7126
Flangia Tubo Misura

151157126
D1401088: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-112-2671
Helical Compression Spring Seat

151122671
773149: RNCC: 3 | RNVC: 2

30 Apr 1988

5340-15-105-8178
Sostegno Elastico

151058178
837040: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-107-4335
Rigid Surface Mechanical Patch

151074335
22020160: RNCC: 3 | RNVC: 2
22020160: RNCC: 5 | RNVC: 9

19 Jun 1988

5340-15-154-7945
Dust And Moisture Seal Protective Plug

151547945
W008369: RNCC: 3 | RNVC: 2
(7001)5340151547945: RNCC: 5 | RNVC: 2

26 Sep 2001

5340-15-180-0771
Threaded End Tensioning Tie Rod

151800771
1R 612364: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-178-2131
Dust And Moisture Seal Protective Cap

151782131
383 901 061: RNCC: 3 | RNVC: 2

11 Mar 2005

5340-15-166-5055
C Linder

151665055
46142001: RNCC: 3 | RNVC: 2
46142001: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-111-3982
Flangiapassaggiocav

151113982
377A2048-401: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-152-7963
Dust And Moisture Seal Protective Cap-Plug

151527963
P200214: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-185-5542
Portachiavi Traspon

151855542
PCT: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-149-3324
Multiple Angle Bracket

151493324
60143738: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-136-9192
Sospensione Elastic

151369192
80682: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-111-3983
Flangiapassaggiocav

151113983
377A2048-403: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-195-6887
Braccio Pieghevole

151956887
1BR7EMOFF3MT-ZA: RNCC: 3 | RNVC: 2
(241)ACA441BR7EMOFF3MT-ZA: RNCC: 5 | RNVC: 2

21 Apr 2011

5340-15-060-1416

5340-15-119-9495
Helical Compression Spring Seat

151199495
002-0018-1: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-206-5787
Utility Resilient Mount

152065787
HD-45 / S-55: RNCC: 3 | RNVC: 2
(241)AJ710HD-45 / S-55: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-118-9881
Helical Compression Spring Seat

151189881
75207880: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-120-6606
Dust And Moisture Seal Protective Cap-Plug

151206606
D0471190: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-074-4425
Turnbuckle

150744425
1B8UNI20210T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-009-6408
Listello Profilato

150096408
1112228: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-211-5240
Latch Adjustable Gr

152115240
80A-1101: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-060-2307
Fascetta Speciale

150602307
41351-030: RNCC: 3 | RNVC: 2

7 Dec 1976

5340-15-110-0319
Cornicemetallica

151100319
20244-001A1: RNCC: 3 | RNVC: 2

11 Mar 1990

5340-15-200-5372
Angolare Di Rinforz

152005372
1188.067-01: RNCC: 3 | RNVC: 2
(241)A30931188.067-01: RNCC: 5 | RNVC: 2

29 Jan 2006

5340-15-000-4449
Strengthening

150004449
129-0950-27-109: RNCC: 3 | RNVC: 2

4 Mar 2013

5340-15-157-9840
Hinge Assy

151579840
J94345421-401: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-114-4119
Dispositivodicolleg

151144119
39A836-12-40-04A: RNCC: 3 | RNVC: 2

11 Jun 1992

5340-15-158-6028
Turnbuckle

151586028
122505463: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-182-7851
Inside Handle Canop

151827851
263A2320-401: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-189-5661
Ammortizzatore

151895661
V168-1: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-151-9862
Tampone Elastico

151519862
0-157267: RNCC: 3 | RNVC: 2
00157267: RNCC: 3 | RNVC: 2
(241)A39630-157267: RNCC: 5 | RNVC: 2
(241)A396300157267: RNCC: 5 | RNVC: 2

31 Jul 2000

5340-15-001-8270
Dust And Moisture Seal Protective Cap

150018270
504329297: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-066-2048
Button

150662048
3615-1: RNCC: 3 | RNVC: 2
3615-1: RNCC: 3 | RNVC: 2

10 Feb 1986

5340-15-110-3226
Nipple

151103226
714627-1: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-000-4822
Support

150004822
71422005: RNCC: 3 | RNVC: 2
71422005: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-210-1937
Snodo Superiore Kin

152101937
035416611: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-006-3062
Plate Locking

150063062
P-180058-001: RNCC: 3 | RNVC: 2
P180058-001: RNCC: 5 | RNVC: 2

24 Nov 1979

5340-15-170-8191
Supporto Sintonie

151708191
340-1005/01.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-211-6291
Lucchetto Massima S

152116291
ART.1960277: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-151-7085
Staffa

151517085
0-177539: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-185-4683
Sollevatore 3 Vento

151854683
MAURER: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-074-4333
Turnbuckle

150744333
2B30UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4351
Turnbuckle

150744351
1C16UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-163-1686
Support

151631686
9616599980: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-137-5851
Tappo Gomma Profila

151375851
137660: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-149-4556
Anello

151494556
1084.048: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-15-182-6752
Coppia Scrocchi

151826752
0706360: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-133-0617
Fascetta

151330617
S64X15H735: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-059-7260
Helical Compression Spring Retainer

150597260
05117-101A1: RNCC: 3 | RNVC: 2

19 Jun 1976

5340-15-154-4110
Dust And Moisture Seal Protective Plug

151544110
0502049010: RNCC: 3 | RNVC: 2
(241)A97720502049010: RNCC: 5 | RNVC: 2

22 May 2001

5340-15-054-0763
Semicerniera

150540763
260-18-12-15: RNCC: 3 | RNVC: 2
260-18-12-15: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-057-8093

5340-15-162-0172
Cover

151620172
E1621.0000: RNCC: 5 | RNVC: 2
E1621.0000: RNCC: 5 | RNVC: 9

15 Nov 2000

5340-15-144-9596
Tappo

151449596
99489567: RNCC: 3 | RNVC: 2
99437787: RNCC: 3 | RNVC: 2
PS-110023: RNCC: 5 | RNVC: 2

24 Feb 1997

5340-15-007-0901
Piastrina Speciale

150070901
0-21754: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-105-5980
Staffa A Gomito

151055980
4970200: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-116-8486
Headless Grooved Rod

151168486
D1402560: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-002-1364
Angle Bracket

150021364
5801474086: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-193-6590
Tira Levetta

151936590
163120139: RNCC: 3 | RNVC: 2
(241)A0199163120139: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-194-0934
Dust And Moisture Seal Protective Cap-Plug

151940934
IPT3181-12CF: RNCC: 3 | RNVC: 2
IPT3181-12CF: RNCC: 5 | RNVC: 2
IPT3181-12CF: RNCC: 5 | RNVC: 2

30 Aug 2010

5340-15-120-6970
Cannotto Con Scanal

151206970
D1406557: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-170-4198
Dust And Moisture Seal Protective Cap

151704198
380000-5663: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-153-8102
Base (1) Per Sosteg

151538102
01800A126010: RNCC: 5 | RNVC: 3
01800A126010: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-147-9616
Staffa Ancoraggio

151479616
P3383POS.1: RNCC: 3 | RNVC: 2

19 Jun 1998

5340-15-166-5148
Chiusura A Leva

151665148
51L1: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-100-0917
Strap Electrolytic

151000917
65285F01: RNCC: 3 | RNVC: 2

14 May 1999

5340-15-205-7082
Sportello Accesso

152057082
004.03.0716: RNCC: 3 | RNVC: 2
5387.PM.08.0186: RNCC: 3 | RNVC: 2
(241)A53875387.PM.08.0186: RNCC: 5 | RNVC: 2

28 Mar 2012

5340-15-101-7830
Fascetta Speciale

151017830
SC32674.76D: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-112-8969
Fascetta Speciale

151128969
8190151: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-201-2134
Ca Bracket Assembly

152012134
4133T08G02: RNCC: 3 | RNVC: 2
(241)A34604133T08: RNCC: 5 | RNVC: 2
4133T08: RNCC: 5 | RNVC: 9

4 Jul 2006

5340-15-158-6690
Resilient Mount

151586690
666660001: RNCC: 3 | RNVC: 2
(241)A5103666660001: RNCC: 5 | RNVC: 2

19 Mar 2004

5340-15-144-9525
Dust And Moisture Seal Protective Plug

151449525
14329501: RNCC: 3 | RNVC: 2

24 Feb 1997

5340-15-204-9579
Riduzione

152049579
647000000221: RNCC: 3 | RNVC: 2
(241)AK137647000000221: RNCC: 5 | RNVC: 2

2 Feb 2012

5340-15-234-8545
Ghiera Conica

152348545
LRT 150: RNCC: 3 | RNVC: 2
534015E081260: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-114-1398
Helical Compression Spring Retainer

151141398
04-0186-059: RNCC: 3 | RNVC: 2
04.0186.059: RNCC: 3 | RNVC: 2

4 Jun 1993

5340-15-109-2563
Snap Hook

151092563
9.6.80-0.0.0: RNCC: 3 | RNVC: 2

31 Jan 1990

5340-15-198-8880
Dust And Moisture Seal Protective Plug

151988880
N632G4048201: RNCC: 3 | RNVC: 2
(241)A0126N632G4048201: RNCC: 5 | RNVC: 2

24 Nov 2004

5340-15-193-6681
Spring Loaded Cylinder Fastener

151936681
163142195: RNCC: 3 | RNVC: 2
GN 35093: RNCC: 3 | RNVC: 2
(241)A0774GN35093: RNCC: 5 | RNVC: 2
(241)A0199163142195: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-111-3957
Supportopertubazion

151113957
345A3285-001: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-180-9370
Angle Bracket

151809370
109-0640-03-90: RNCC: 3 | RNVC: 2
(241)A0126109-0640-03-90: RNCC: 5 | RNVC: 2

22 Aug 2008

5340-15-181-4706
Hinge (Postmod Del

151814706
215A1016-005: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-117-7031
Nut And Bolt Locking Plate

151177031
1P 288165: RNCC: 3 | RNVC: 2
1P 288165: RNCC: 5 | RNVC: 9

30 Nov 1994

5340-15-203-7361
Dust And Moisture Seal Protective Cap

152037361
64910130: RNCC: 3 | RNVC: 2
64910130: RNCC: 5 | RNVC: 2
CV173616: RNCC: 5 | RNVC: 2

27 Jun 2011

5340-15-207-4109
Nonmetallic Solid Wheel

152074109
452108003: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-170-6127
Headless Straight Rod

151706127
FK0C90REP14: RNCC: 3 | RNVC: 2
CAE00270: RNCC: 5 | RNVC: 2

2 Apr 2003

5340-15-170-8066
Manicotto Segnacavo

151708066
340-0542/05: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-118-4823
Helical Compression Spring Seat

151184823
02.0710.A.04: RNCC: 3 | RNVC: 2
02.0710.A.04: RNCC: 5 | RNVC: 9

7 Feb 1995

5340-15-062-8515
Fibbia A Passante S

150628515
413020250: RNCC: 3 | RNVC: 2
413020250: RNCC: 3 | RNVC: 2

27 Oct 1982

5340-15-059-2284
Doppio Cilindrico

150592284
1971-037DS: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-220-0666
Telaio Porta Angola

152200666
S1-144G: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-064-2128
Serratura

150642128
109-0301-60-11: RNCC: 3 | RNVC: 2

31 Jan 1984

5340-15-137-2421
Turnbuckle

151372421
850217-101: RNCC: 3 | RNVC: 2
850217-101: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-170-0450
Padlock

151700450
F72021022: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-218-1130
Pannello Forato

152181130
PANNELLO10002: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-169-3591
Padlock

151693591
F72011000: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-105-5966
Staffa A Gomito

151055966
002.2694.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-153-0276
Seat Pipe Support

151530276
67750F91: RNCC: 3 | RNVC: 2

15 Nov 2000

5340-15-110-5608
Helical Compression Spring Seat

151105608
108159: RNCC: 2 | RNVC: 2
1P 108159: RNCC: 3 | RNVC: 2
108159: RNCC: 5 | RNVC: 9
1P 108159: RNCC: 5 | RNVC: 9

13 Jan 1995

5340-15-180-5168
Sealing Plug Assembly

151805168
4T0070001: RNCC: 3 | RNVC: 2
(241)A98404T0070001: RNCC: 5 | RNVC: 2

10 Jun 2008

5340-15-206-0027
Engine Accessory Bracket

152060027
1Q 605292: RNCC: 3 | RNVC: 2
(241)A01061Q605292: RNCC: 5 | RNVC: 2

2 May 2012

5340-15-136-0199
Fascetta Sarratubo

151360199
ID28: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-107-9852
Bush

151079852
322-0010/24: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-148-7504
Tappo Speciale

151487504
2104-0042-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-002-1625
Angle Bracket

150021625
5801325685: RNCC: 3 | RNVC: 2

24 Jul 2013

Load More Results