What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 57 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 57 of 72

5340-15-001-8536
Fuel Feeding Pump

150018536
ED00652R0340-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-151-9857
Staffa

151519857
0-156579: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-138-2890
Lucchetto A Combina

151382890
0404.9: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-105-8940
Tirante A Teste Fil

151058940
10360: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-199-3820
Leva

151993820
4.42632.006.00: RNCC: 3 | RNVC: 2
(241)A39630000000132811: RNCC: 5 | RNVC: 2
0000000132811: RNCC: 5 | RNVC: 2

13 Mar 2005

5340-15-009-7082
Cover

150097082
1236-22-010: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-007-1073
Nut And Bolt Locking Plate

150071073
25250A043: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-001-5839
Bumper

150015839
42566643: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-186-8246
Key Blank

151868246
LF4: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-139-2697
Lucchetto Ottone

151392697
AL 030: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-178-6127
Lock Key

151786127
LBY:FRHW00265: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-147-2619
Portaguarnizioni

151472619
B53358: RNCC: 3 | RNVC: 2

31 Jul 2000

5340-15-003-3207
Molla Reggispinta

150033207
738428: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-189-1335
Piastra Di Montaggi

151891335
60142634: RNCC: 3 | RNVC: 2
(241)A424960142634: RNCC: 5 | RNVC: 2

28 Jan 2010

5340-15-001-7099
Nut And Bolt Retainer

150017099
8100407: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-204-0460
Modular Block

152040460
CP08004C: RNCC: 3 | RNVC: 2

23 Aug 2011

5340-15-218-1391
Maglia Giunzione Mm

152181391
103810070: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-6619
Scatola

151186619
75208162: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-163-2430
Clip

151632430
8106400: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-135-9773
Ammortizzatore Serb

151359773
263226: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-158-5595
Rubber Bumper

151585595
122607463: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-115-8764
Plate Suppo

151158764
273300G7: RNCC: 3 | RNVC: 2
71-26-002-022: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-114-6027
Resilient Mount

151146027
V1B.1135-25: RNCC: 3 | RNVC: 2
V1135-25: RNCC: 5 | RNVC: 2
V1135-25: RNCC: 5 | RNVC: 2

23 Jun 1992

5340-15-210-7471
Padlock

152107471
EX-RI-401-0874: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-118-0360
Piastrino In Ferro

151180360
D0472349: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-115-7115
Disco Metallico Sup

151157115
D0470359: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-117-0014
Arretoir Sur Embray

151170014
79041951: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-170-7773
Internal Holder Ass

151707773
341-4605/01.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-142-3947
Control Rod

151423947
219499/041: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-149-6168
Ring Nut

151496168
518-38-1780: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-108-8930
Control Rod

151088930
4696893: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-074-4102
Turnbuckle

150744102
1C22UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-137-3696
Distanziale

151373696
B388469: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-123-6675
Supporto In Durall

151236675
2GMVDIS13-92: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-157-2456
Convogliatore Aria

151572456
DE160.03.423: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.423: RNCC: 5 | RNVC: 2

9 Jun 2003

5340-15-217-1430
Morsetto Per Saldat

152171430
5257G: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-234-4034
Collare Fissaggio F

152344034
5634.01FT-1"1/4: RNCC: 3 | RNVC: 2
534015E066774: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-147-5830
Soupape

151475830
98VA177: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-127-1221
Maniglia

151271221
616731: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-051-3682
Tirante Completo

150513682
4507090: RNCC: 3 | RNVC: 2
4507090: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-166-5000
Hingehalf

151665000
216A0007001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-209-0709
Lucchetto Corazzato

152090709
DOM-IX5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-107-4222
Resilient Mount

151074222
V1650-11: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-191-9236
Supporto Cuscinetto

151919236
12-003: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-178-9942
Hinge Block

151789942
RS 404 814: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-178-7367
Gicleur Lance De La

151787367
028414: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-122-2364
Manual Control Handle

151222364
8B0058150: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-138-2874
Contropiastra Piana

151382874
06274-00: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-153-5004
Reinforcement

151535004
J57151746-002: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-120-7607
Buffer

151207607
46883-001: RNCC: 5 | RNVC: 2
46883-001: RNCC: 5 | RNVC: 9
46883-001: RNCC: 5 | RNVC: 9

31 Jul 1995

5340-15-110-2882
Bracket Fue

151102882
P125882-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-005-9989
Tappo Esterno

150059989
20004-046-01: RNCC: 3 | RNVC: 2

11 Aug 1979

5340-15-118-0268
Piastrina Di Strozz

151180268
D0272529: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-15-212-1676
Fascette Standard

152121676
FASC-STANDARD: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-156-3925
Flange

151563925
CBD70797P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-118-3486
Mensola Complessivo

151183486
60145660: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-105-8165
Sostegno Elastico

151058165
23920: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-188-6448
Hinge Pivot

151886448
CBD71602P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71602P01: RNCC: 5 | RNVC: 2

20 Oct 2009

5340-15-055-1143
Fascetta Stringitub

150551143
62051-13: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-169-5654
Lucchetto Comb.

151695654
F72015224: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-005-5152
Piastra Bloccaggio

150055152
4407983: RNCC: 3 | RNVC: 2
4407983: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-163-2927
Volls Schelle

151632927
3617.179: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-201-7298
Turnbuckle

152017298
60189010: RNCC: 3 | RNVC: 2
(241)A424960189010: RNCC: 5 | RNVC: 2

28 Nov 2006

5340-15-002-7223
Molla Filtro Benzin

150027223
2109: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-005-9987
Coperchio Molla

150059987
20004-008-00: RNCC: 3 | RNVC: 2

11 Aug 1979

5340-15-147-3870
Cap Reserv

151473870
300449: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-119-5630
Resilient Mount

151195630
OM07479000: RNCC: 3 | RNVC: 2
93158557: RNCC: 5 | RNVC: 2

19 Sep 1994

5340-15-006-3524
Mensola Sostegno Ca

150063524
1389256: RNCC: 3 | RNVC: 2
1389256: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-139-5302
Silentblock

151395302
8557842: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-009-3278
Semicerniera

150093278
P-884052-001: RNCC: 3 | RNVC: 2

12 Sep 1980

5340-15-051-9223
Chiave Per Serratur

150519223
DISVP17TIP01SINISTRA: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-232-9579
Tassello Con Gancio

152329579
534015E075118: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-112-1267
Electrical-Me Post

151121267
013.01.300: RNCC: 3 | RNVC: 2
(241)A5015013.01.300: RNCC: 5 | RNVC: 2

12 Feb 1991

5340-15-139-7554
Fissaggio Gaffetta

151397554
0007573: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-206-1531
Anello Tenuta

152061531
5340159801985: RNCC: 3 | RNVC: 2
(241)A88205340159801985: RNCC: 5 | RNVC: 2

25 May 2012

5340-15-074-4193
Turnbuckle

150744193
1B22UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-195-0158
Ring Upper

151950158
CBD71186P04: RNCC: 3 | RNVC: 2
(241)A3460CBD71186P04: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-199-6198
Padlock Set

151996198
190597167: RNCC: 3 | RNVC: 2

10 May 2005

5340-15-120-6878
Coperchio In Allumi

151206878
D0471343: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-106-9525
Piastrina Fissaggio

151069525
5086-03-65: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-4094
Turnbuckle

150744094
2B8UNI20180T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-148-9296
Sede Speciale

151489296
2203-0013-001: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-15-127-4146
Guarnizione

151274146
1413-90-057: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-199-5877
Anello

151995877
M2VA80B/24: RNCC: 3 | RNVC: 2
(241)A5205M2VA80B/24: RNCC: 5 | RNVC: 2

4 May 2005

5340-15-199-5878
Anello

151995878
M2AAM100LB/24: RNCC: 3 | RNVC: 2
(241)A5205M2AAM100LB/24: RNCC: 5 | RNVC: 2

4 May 2005

5340-15-166-4970
Rh Hinge Ass

151664970
311A7310402: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-104-8852
Fissaggio Gaffetta

151048852
38824256: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-0348
Coperchio Valvola

151180348
D0467951: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-177-4939
Sliding Stay

151774939
028024: RNCC: 3 | RNVC: 2

17 Apr 2004

5340-15-058-4027
Threaded End Tensioning Tie Rod

150584027
553802145000: RNCC: 2 | RNVC: 3
538-02-1450: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-075-2872
Silentbloc

150752872
88113513SERIEG: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-075-1898
Molla Elicoidale To

150751898
750390Y: RNCC: 3 | RNVC: 2
T2J267: RNCC: 5 | RNVC: 2

30 Jun 1999

5340-15-074-4119
Turnbuckle

150744119
2C8UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-002-2127
Friction Catch Housing

150022127
504130746: RNCC: 3 | RNVC: 2
504130746: RNCC: 5 | RNVC: 2

29 Jul 2013

5340-15-062-1828
Lever

150621828
P892589-001: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-001-5277
Dust And Moisture Seal Protective Cover

150015277
ECC 24/25 REP61: RNCC: 3 | RNVC: 2

10 Jul 2013

5340-15-050-4122
Piastrina

150504122
70425PP3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-116-7945
Piastrina Di Blocca

151167945
DOR0116043: RNCC: 3 | RNVC: 2

18 Nov 1993

5340-15-155-9715
Padlock

151559715
60111512: RNCC: 3 | RNVC: 2

17 Oct 2002

5340-15-181-0906
Raccordo Elettro-Me

151810906
UD10E3050.40: RNCC: 3 | RNVC: 2
898MC0390: RNCC: 5 | RNVC: 2

21 Oct 2008

5340-15-104-4334
Testa Tira Forcella

151044334
38531155: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-060-7088
Cerniera Compl Post

150607088
109-0310-47-1: RNCC: 3 | RNVC: 2

14 Dec 1976

5340-15-114-7159
Control Rod

151147159
03-619-B-22: RNCC: 1 | RNVC: 3
(7001)5340151147159: RNCC: 3 | RNVC: 2
53558: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-15-009-8780
Fascetta Speciale

150098780
0-42396: RNCC: 3 | RNVC: 2
0-10525: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-206-5899
Utility Resilient Mount

152065899
V3CA8080-05: RNCC: 3 | RNVC: 2
(241)AJ807V3CA8080-05: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-149-6159
Plate

151496159
518-38-1670: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-067-7747
Handwheel

150677747
D3501-006P: RNCC: 2 | RNVC: 2
D3501-006P: RNCC: 5 | RNVC: 9

1 Apr 1998

5340-15-116-8478
Control Rod

151168478
D1402136: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-201-0584
Attacco

152010584
N252G4075051: RNCC: 3 | RNVC: 2
(241)A0126N252G4075201: RNCC: 5 | RNVC: 2

16 May 2006

5340-15-158-5837
Resilient Mount

151585837
122606970: RNCC: 3 | RNVC: 2

9 Mar 2004

5340-15-156-2132
Support

151562132
(241)A3460CBD70761P18: RNCC: 3 | RNVC: 2
CBD70761P18: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-052-1081
Control Rod

150521081
523-12-21A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-215-3471
Ruota Piroettante

152153471
RUOTA-MM40: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-207-0851

5340-15-207-0847

5340-15-005-3432
Articoli Vari

150053432
107716: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-170-8240
Fianco Cofano Forat

151708240
340-0093/09: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-007-5414
Cover Plate Access

150075414
1139-02-106: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-149-1808
Peso Di Bilanciamen

151491808
2401-0047-005: RNCC: 3 | RNVC: 2

15 Dec 1998

5340-15-179-0062
Angle Iron

151790062
RU 400 325: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-062-0917
Bumper

150620917
31771-001: RNCC: 5 | RNVC: 2
31771-001: RNCC: 5 | RNVC: 9
31771-001: RNCC: 5 | RNVC: 9

27 Oct 1980

5340-15-151-7553
Hinge

151517553
J52850251-001: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-201-9305
Pipe Bracket

152019305
504054738: RNCC: 3 | RNVC: 2
(241)A4249504054738: RNCC: 5 | RNVC: 2

16 Jan 2007

5340-15-118-2829
Coperchio Premiguar

151182829
D0385526: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-147-5788
Hendel Bol

151475788
98PO168: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-181-7801
Cilindro Da Infilar

151817801
820830407: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-114-2541
Coperchio

151142541
8253.01.36: RNCC: 3 | RNVC: 2

12 May 1993

5340-15-156-3650
Base

151563650
(241)A3460CBD71407P01: RNCC: 3 | RNVC: 2
CBD71407P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-222-2289
Porta Roller Shutte

152222289
S1-13B1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4447
Turnbuckle

150744447
2B30UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4268
Turnbuckle

150744268
1A33UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-142-9203
Support

151429203
06 05 036 00: RNCC: 3 | RNVC: 2

22 Oct 1996

5340-15-074-4312
Turnbuckle

150744312
1B33UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-166-4848
Cerniera Femmina

151664848
035421964: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-181-7741
Terminale Asta

151817741
GS2114: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-102-1049
Cinghia Complessiva

151021049
192-0549/11: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-104-8872
Fissaggio Gaffetta

151048872
4028126: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-147-5632
Support

151475632
518-02-2820: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-177-5197
Bracket

151775197
341-4613/01: RNCC: 3 | RNVC: 2

17 Apr 2004

5340-15-166-4800
Tappo E Filtro

151664800
1938: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-4806
Fascetta

151664806
69R013P001D: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5256
Telaio

151665256
542147: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-169-7406
Lucchetto S&G

151697406
F72018337: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-198-9090
Blocki Caster Wheel

151989090
26HJ04143043S01-801/053: RNCC: 3 | RNVC: 2

25 Nov 2004

5340-15-203-1910
Bandlock

152031910
SX9C90-110W4: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-122-5539
Braki Skid

151225539
01TL21202: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-007-2736
Coperchio Ritegno

150072736
1386428: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-198-5836
Rh Support Assy

151985836
21366-002: RNCC: 3 | RNVC: 2

15 Oct 2004

5340-15-216-8262
Tassello In Acciaio

152168262
0423: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4411
Turnbuckle

150744411
2A30UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-158-4417
Rod

151584417
22932-001: RNCC: 3 | RNVC: 2

15 Feb 2004

5340-15-215-5203
Supporto Dischi Abr

152155203
7885G-18: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-153-7665
Base (1) Per Sosteg

151537665
01800H118220: RNCC: 5 | RNVC: 2
01800H118220: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-008-1473
Cover Plate Access

150081473
0-05644: RNCC: 3 | RNVC: 2

9 Jun 1981

5340-15-217-6876
Confezione Punte A

152176876
302013881400: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-104-4327
Testa Tira Forcella

151044327
000.4667.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-068-0062
Cappuccio Nero

150680062
P/N 8018: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-109-6823
Control Rod

151096823
533513-01: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-151-1163
Staffa Per Tubazion

151511163
J26240210-402: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-120-7541
Column

151207541
GB254-420-061: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-103-6531
Resilient Mount

151036531
01-34994: RNCC: 3 | RNVC: 2
24009029A VM: RNCC: 5 | RNVC: 2

26 Nov 1987

5340-15-214-6343
Carrello Monorotaia

152146343
CARRELLOMONOROTAIA: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-183-4189
Tela

151834189
FU020384: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-180-5083
Stand Base

151805083
55MM1SF: RNCC: 3 | RNVC: 2
(241)A380455MM1SF: RNCC: 5 | RNVC: 2

10 Jun 2008

5340-15-007-8117
Assembled Nut Retainer

150078117
1/45754/80: RNCC: 3 | RNVC: 2
14575480: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-152-3487
Tirante

151523487
0-153332: RNCC: 3 | RNVC: 2
00153332: RNCC: 3 | RNVC: 2
(241)A39630-153332: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-152-6422
Impugnatura Special

151526422
0-112453: RNCC: 3 | RNVC: 2
(241)A39630-112453: RNCC: 5 | RNVC: 2

3 Oct 2000

5340-15-001-2933
Connection Flange

150012933
21310096: RNCC: 3 | RNVC: 2
131-0001 ITEM 47: RNCC: 5 | RNVC: 2
131-0003 ITEM 47: RNCC: 5 | RNVC: 2
131-0004 ITEM 47: RNCC: 5 | RNVC: 2

17 Jun 2013

5340-15-118-4896
Staffa Tubo Standar

151184896
33431/16: RNCC: 3 | RNVC: 2
33431/16: RNCC: 5 | RNVC: 9

7 Feb 1995

5340-15-006-8969
Control Rod

150068969
39X503-12-11: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-237-3382
Tassello In Plastic

152373382
11546100101: RNCC: 3 | RNVC: 2
534015E120586: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-157-9811
Hinge Half

151579811
J94345333-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-055-8651
Spina Per Perniera

150558651
260-11-148-11: RNCC: 3 | RNVC: 2
260-11-148-11: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-055-6238
Tassello Per Staffe

150556238
728319: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-173-3007
Staffa Icam Fissagg

151733007
41PB0100000: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-120-6481
Piastrino Metallico

151206481
D0467777: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-166-5174
Assieme Supporto

151665174
931843801: RNCC: 3 | RNVC: 2
931843801: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-006-4367
Serie Fascette Rite

150064367
204-6900-23-1: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-107-1045
Helical Compression Spring Retainer

151071045
301-01-1210: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-101-7824
Fascetta Speciale

151017824
SC32674.73D: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-113-2486
Staffacomplessivo

151132486
345A4274-402: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-199-4133
Ghiera Posteriore

151994133
76837: RNCC: 3 | RNVC: 2
(241)A017876837: RNCC: 5 | RNVC: 2

22 Mar 2005

5340-15-061-5120
Control Rod

150615120
P26DA13: RNCC: 5 | RNVC: 2
P26DA13: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-178-6919
Fixing Bracket

151786919
156788-1: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-074-4295
Turnbuckle

150744295
2A56UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-155-4437
Location Shaft

151554437
CBD71049P02: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-111-3976
Supporto

151113976
377A1548-003: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-153-5022
Half Hinge

151535022
J57140704-001: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-068-4368
Gradini Di Salita

150684368
SH 4254-401: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-205-3812
Lever Holder

152053812
539-001-00212: RNCC: 3 | RNVC: 2

6 Mar 2012

5340-15-110-2881
Bracket Fue

151102881
P120078-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-154-1140
Staffa

151541140
0-170647: RNCC: 3 | RNVC: 2
(241)A39630-170647: RNCC: 5 | RNVC: 2
1PA39630-170647: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-213-0349
Staffa Per Cartello

152130349
STAFFA-CARTELLO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-180-2126
Filling And Ae Cap

151802126
HB70-A8L205H1R: RNCC: 3 | RNVC: 2

15 Feb 2008

5340-15-115-3423
Safety Plate

151153423
710-6330-058: RNCC: 3 | RNVC: 2
82-01557: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-163-3624
Anchor Strap

151633624
4775924: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-074-4315
Turnbuckle

150744315
1B45UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-192-5834
Portarotolo A Terra

151925834
ATPORTTE: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-142-0749
Handwheel

151420749
W002546: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-203-4559
S Thread Protection

152034559
N714U3006201: RNCC: 3 | RNVC: 2
(241)A0126N714U3006201: RNCC: 5 | RNVC: 2

4 Feb 2008

5340-15-206-9202
Fixed Hinge Assy

152069202
129-0321-84-103: RNCC: 3 | RNVC: 2
(241)A0126129-0321-84-103: RNCC: 5 | RNVC: 2

26 Jul 2012

5340-15-116-7816
Sostegno Per Suppor

151167816
8106C/56: RNCC: 3 | RNVC: 2

21 Apr 1994

5340-15-157-9842
Hinge Half

151579842
J94345423-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-074-4331
Turnbuckle

150744331
2B22UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4212
Turnbuckle

150744212
1C8UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4420
Turnbuckle

150744420
1B20UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-155-8469
Supporto Sensore

151558469
D1406089: RNCC: 3 | RNVC: 2

2 Aug 2002

5340-15-105-8497
Double Angle Bracket

151058497
4959840: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-110-5634
Dust And Moisture Seal Protective Cap-Plug

151105634
1P 305210: RNCC: 3 | RNVC: 2
1P 305210: RNCC: 5 | RNVC: 9

1 Apr 1998

5340-15-155-5832
Assieme Tappo

151555832
A139679-1: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-15-110-6402
Dust And Moisture Seal Protective Plug

151106402
30.00.20/4: RNCC: 3 | RNVC: 2
95999003: RNCC: 5 | RNVC: 2
0-110808: RNCC: 5 | RNVC: 2

16 Mar 1990

5340-15-217-6816
Prolunga Mont. Soff

152176816
PROLUNGAXP20: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-120-5736
Corpo Interno Di Qu

151205736
14.08.60.00: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-118-6127
Bride

151186127
73131687: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-064-7036
Bracket

150647036
A-125602-002: RNCC: 3 | RNVC: 2
A125602-002: RNCC: 5 | RNVC: 2

10 Jun 1984

5340-15-157-2128
Locking Plate

151572128
252A4108-001: RNCC: 3 | RNVC: 2

21 May 2003

5340-15-113-9923
Piastra Di Orientab

151139923
U214: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-074-4120
Turnbuckle

150744120
2C10UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-221-4629
Handwheel

152214629
EX4310RI7421298: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-101-1229
Complessi Tenditore

151011229
39A506-34: RNCC: 3 | RNVC: 2

1 Dec 1987

5340-15-170-3594
Clip

151703594
206-031-427-13: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-151-1633
Tbos-Eu Bracket

151511633
8854 130-231: RNCC: 3 | RNVC: 2
8854130-231: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-15-061-0827
Helical Compression Spring Seat

150610827
G13-1: RNCC: 3 | RNVC: 2

31 Aug 1977

5340-15-078-0834
Morsetto

150780834
TM01-63-78: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-127-2850
Staffetta

151272850
702964: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-103-1097
Sostegno Fune

151031097
DE013.14.111: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-156-1855
Sealing Plug Assembly

151561855
60163026: RNCC: 3 | RNVC: 2

11 Dec 2002

5340-15-105-6372
Collare Serraggio

151056372
815130: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-5261
Bobina Filo Armonic

151665261
998003: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-232-2013
Cerniera Acciaio In

152322013
38.491.30: RNCC: 3 | RNVC: 2
534015E151334: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-149-4928
Bielletta

151494928
0552000-13: RNCC: 3 | RNVC: 2

20 Apr 1999

5340-15-153-8092
Base (1) Per Sosteg

151538092
T0063608: RNCC: 5 | RNVC: 2
000205038600: RNCC: 5 | RNVC: 3
000205038600: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-147-0659
Piastra Di Montaggi

151470659
1808-135: RNCC: 3 | RNVC: 2
1808-135: RNCC: 5 | RNVC: 9

21 Aug 1997

5340-15-151-9454
Staffa

151519454
00174693: RNCC: 3 | RNVC: 2
0-174693: RNCC: 3 | RNVC: 2
1PA39630-174693: RNCC: 5 | RNVC: 2
(241)A39630-174693: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-113-8429
Corrosion Preventive Anode

151138429
86687/7/12: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-100-7615
Fascetta Compl Spec

151007615
109-0020-76-1: RNCC: 3 | RNVC: 2

24 Nov 1986

5340-15-053-3448
Rod End Externally

150533448
4-16105-101-72591A1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-054-8806
Threaded End Tensioning Tie Rod

150548806
546-03-1050: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-138-3800
Tirante Ritmo

151383800
4392879: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-139-7560
Fissaggio Graffetta

151397560
0008924: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-001-3465
Spacing Threaded Standoff

150013465
920-9881/01: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-194-4103
Dust And Moisture Seal Protective Cap

151944103
TF-14: RNCC: 3 | RNVC: 2
09205034: RNCC: 5 | RNVC: 2

5 Nov 2010

5340-15-147-5173
Piastrina

151475173
39468-001: RNCC: 5 | RNVC: 2
39468-001: RNCC: 5 | RNVC: 9
39468-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-000-4823
Support

150004823
71422006: RNCC: 3 | RNVC: 2
71422006: RNCC: 5 | RNVC: 2

11 Mar 2013

5340-15-203-0309
Piastra Separatore

152030309
1040005: RNCC: 3 | RNVC: 2
(241)A50091040005: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-154-9309
Dust And Moisture Seal Protective Cap-Plug

151549309
CBD71007G01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-105-8504
Double Angle Bracket

151058504
15347: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-4929
Lucchetto Arresto

151664929
42480575: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-118-0503
Pattino Per Guida

151180503
489560: RNCC: 3 | RNVC: 2
D0489560: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-148-7338
Resilient Mount

151487338
8162306: RNCC: 3 | RNVC: 2
9013090015: RNCC: 5 | RNVC: 2

4 Aug 1999

5340-15-196-9921
Padlock

151969921
PN UAS 00028240: RNCC: 3 | RNVC: 2
5340F76010803: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-055-6754
Staffa

150556754
532399: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-221-4560
Padlock

152214560
EX5340RI7422409: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-218-1612
Lucchetto Combinazi

152181612
16050C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-121-6287
Patin De Bequille

151216287
800034568: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-121-6744
Nonmetallic Bumper

151216744
9430949: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-162-2951
Guard Flame Spanner

151622951
50726664: RNCC: 3 | RNVC: 2

27 Jun 2001

5340-15-231-6334
Piastra

152316334
0-122250: RNCC: 3 | RNVC: 2
534015E103938: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-153-8109
Base (1) Per Sosteg

151538109
01900A115790: RNCC: 5 | RNVC: 3
01900A115790: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-218-4518
Fischer Ad Ancora D

152184518
KD04: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-006-2886
Cerniera Speciale

150062886
0-34032: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-176-7908
Giunto

151767908
CEMBRE L10-M: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-120-8198
Flangia Per Indicat

151208198
118635: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-202-5311
Collar

152025311
300015: RNCC: 3 | RNVC: 2
(241)A0810300015: RNCC: 5 | RNVC: 2

2 May 2007

5340-15-112-8155
Fondello

151128155
469532: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-149-4920
Pattino Di Metallo

151494920
0552000-28: RNCC: 3 | RNVC: 2

20 Apr 1999

5340-15-198-5525
Multiple Angle Bracket

151985525
4153T21G01: RNCC: 3 | RNVC: 2
(241)A34604153T21G01: RNCC: 5 | RNVC: 2

13 Oct 2004

5340-15-118-7217
Helical Compression Spring Seat

151187217
79038390: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-151-5500
Dust And Moisture Seal Protective Cap-Plug

151515500
970058: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-15-116-8480
Control Rod

151168480
D1402142: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-207-4118
Key Blank

152074118
VAC46: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-127-3909
Molla

151273909
337176: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-127-4039
Anello Elastici Sic

151274039
840947: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-127-5269
Molla

151275269
875312: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-170-0256
Luccetti Sergent

151700256
F72020835: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-118-6095
Lamelle

151186095
73132144: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-155-0048
Tank El Door Access

151550048
J52445000-402: RNCC: 3 | RNVC: 2

20 Dec 2001

5340-15-179-6520
Bag

151796520
873-8433-007: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-006-9625
Clamp

150069625
4860T1: RNCC: 3 | RNVC: 2

11 Jan 1979

5340-15-060-2380
Escutcheon Plate

150602380
1971TAV76: RNCC: 3 | RNVC: 2

26 Jun 1978

5340-15-105-6368
Collare Serraggio

151056368
10419401: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-102-7995
Assy Hinge

151027995
P-884031-402: RNCC: 3 | RNVC: 2
P884031-402: RNCC: 5 | RNVC: 2

30 Jan 1989

5340-15-174-7594
Fresa Cil.X Pcs 38X

151747594
62329-25/013: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-214-6776
Serratura

152146776
8-16337: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-139-7539
Dispositivo Sicurez

151397539
0007291: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-236-5695
Cerniera

152365695
CE 58: RNCC: 3 | RNVC: 2
534015E117621: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-166-4758
Anello Di Tenuta

151664758
C5022110068: RNCC: 1 | RNVC: 2
C5022110068: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-178-3938
Dust And Moisture Seal Protective Cover

151783938
D5407108: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-159-9732
Rubber Bumper

151599732
122603565: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-064-1487
Cover Plate Access

150641487
75316511: RNCC: 3 | RNVC: 2
9919982: RNCC: 5 | RNVC: 2
75316511: RNCC: 5 | RNVC: 9

15 Oct 1982

5340-15-187-4527
Assy Plug

151874527
14899-405: RNCC: 3 | RNVC: 2
(241)A001914899-405: RNCC: 5 | RNVC: 2

1 Apr 2009

5340-15-045-1499
Control Rod

150451499
502-12-04: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-063-3699
Turnbuckle

150633699
60108625: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-119-5431
Piastra In Acciaio

151195431
D0484464: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-118-2443
Dispositivodisuppor

151182443
252A1346-403: RNCC: 3 | RNVC: 2

22 Apr 1994

5340-15-181-7702
Fascetta In Nylon B

151817702
FS280BC: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-005-6974
Coperchio Speciale

150056974
0-33829: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-041-8466
Staffa Fissaggio Tu

150418466
7-4422-1-01-35493: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-163-4570
Block Fairlead Section

151634570
10C-024-102: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-127-5155
Piastrina Fissag Ca

151275155
871260: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-101-6362
Nut And Bolt Retainer

151016362
808-52391-1: RNCC: 3 | RNVC: 2

30 Nov 1987

5340-15-115-8727
Cover

151158727
273198G3: RNCC: 3 | RNVC: 2
71-15-022-004: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-213-8535
Paracolpo In Plasti

152138535
2064PGO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-103-2069
Piattello Tenuta

151032069
L6400006: RNCC: 3 | RNVC: 2
DE160.03.139: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-150-3907
Dust And Moisture Seal Protective Cap

151503907
M164: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-15-138-3856
Tappo

151383856
4415300: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-109-1817
Rubber Bumper

151091817
1395459: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-146-2012
Lucchetto Sargent-G

151462012
8077: RNCC: 3 | RNVC: 2

11 Jul 1997

5340-15-150-8373
Cerniera

151508373
0046-A-15: RNCC: 3 | RNVC: 2

1 Feb 2000

5340-15-127-5144
Molla Snodo Leva A

151275144
870737: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-074-4148
Turnbuckle

150744148
1D30UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-136-9404
Squadretta

151369404
47-360-185-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-137-2093
Squadretta

151372093
20-038-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-008-2039
Blocchetto

150082039
A1-23436-003: RNCC: 3 | RNVC: 2
A1-23436-003: RNCC: 5 | RNVC: 9

1 Feb 1982

5340-15-166-5058
Container Liquid Ox

151665058
42710001: RNCC: 3 | RNVC: 2
42710001: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-006-8974
Control Rod

150068974
39A510-12-76A: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-112-0473
Dispositivo Di Supp

151120473
252A1346-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-191-6059
Hel Coil

151916059
M3X1.5DLN9499: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-001-8030
Angle Bracket

150018030
500403014: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-041-8009
Asta Filettata

150418009
4-3175-201-41823-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-175-2050
Corrosion Preventive Anode

151752050
IM1072Z: RNCC: 3 | RNVC: 2

3 Feb 2004

5340-15-153-7044
Cerniera (1) A Band

151537044
142010105: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-153-7679
Base (1) Per Sosteg

151537679
01900A106310: RNCC: 5 | RNVC: 2
T0064893: RNCC: 5 | RNVC: 2
01900A106310: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-127-0846
Molla

151270846
336231: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-121-3100
Spring Guide

151213100
3639-70: RNCC: 3 | RNVC: 2
3639-70: RNCC: 5 | RNVC: 9

7 Nov 1995

5340-15-163-2839
Dust And Moisture Seal Protective Plug

151632839
9080.182: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-193-1583
Angle Bracket

151931583
504147901: RNCC: 3 | RNVC: 2
(241)A4249504147901: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-201-1444
Pipe Covering Protection Saddle

152011444
F4971: RNCC: 3 | RNVC: 2

6 Jun 2006

5340-15-178-2587
Inter Clamping Ring

151782587
P3199012: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-179-2937
Lever Holder

151792937
3LEV211750: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-212-7814
Piastrina

152127814
454-0106: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-206-7859
Bracket

152067859
4232263-00: RNCC: 3 | RNVC: 2

20 Jul 2012

5340-15-166-4836
Fascetta

151664836
MS21919WDG38: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-207-1988
Rondella Di Tenuta

152071988
3287561: RNCC: 2 | RNVC: 2
(241)AG3503287561: RNCC: 5 | RNVC: 2

20 Sep 2012

5340-15-193-9543
Chiodi Per Sparachi

151939543
BARBERO 490,CT002260: RNCC: 3 | RNVC: 2
(241)A9410BARBERO490,CT002260: RNCC: 5 | RNVC: 2

3 Aug 2010

5340-15-163-1553
Rivet

151631553
15609211: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-149-2488
Dispositivo Antiurt

151492488
TM119089/801: RNCC: 3 | RNVC: 2

26 Jul 1999

5340-15-184-4975
Anello

151844975
335-2165: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-222-2291
Porta Roller Shutte

152222291
S1-13B3: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-151-4561
Fermo Per Pannello

151514561
AF060182400: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-201-4933
Rubber Bumper

152014933
N523G5250201: RNCC: 3 | RNVC: 2
(241)A0126N523G5250201: RNCC: 5 | RNVC: 2

3 Oct 2006

5340-15-215-3459
Scatola Portafrutti

152153459
GR13304: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-178-9941
Hinge Block

151789941
RS 404 811: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-166-5171
Cover Ass

151665171
70811001: RNCC: 3 | RNVC: 2
70811001: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-005-5335
Anchor Strap

150055335
1026-04-179: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-136-7086
Semicerniera

151367086
47-382-128-10: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-222-2297
Porta Tipo Hedemora

152222297
S1-13E1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-003-8685
Ammortizzatore Spec

150038685
914-5: RNCC: 3 | RNVC: 2

4 Apr 1989

5340-15-175-1472
Insert

151751472
23F-042REF302: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-142-1505
Turnbuckle

151421505
A6145-91010-103: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-149-3667
Cover

151493667
1137-03-107: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-198-5427
Anodo Anticorrosion

151985427
1Z 588845: RNCC: 3 | RNVC: 2

12 Oct 2004

5340-15-001-9844
Angle Bracket

150019844
32858: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-163-1310
Support

151631310
71712967: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-179-0047
Container Welded

151790047
RS 414 140 AE: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-123-6791
Chiusura A Gancio E

151236791
GANCIO: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-106-6991
Tirante Piastrina

151066991
000.8723.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-7142
Lncettaquadrantecom

151157142
D0466449: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-196-9909
Padlock

151969909
PN UAS 00037399: RNCC: 3 | RNVC: 2
5340F76032136: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-201-2952
Occhiello

152012952
122603789: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-055-7657
Fascetta Speciale

150557657
7603-74: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-218-4795
Tassello

152184795
S5V-PLUS: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-109-9685
Access Door

151099685
109-0640-50-206: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-112-8533
Coperchio

151128533
471338: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-187-8829
Safety Plate

151878829
613 17: RNCC: 3 | RNVC: 2

19 May 2009

5340-15-179-7166
Support

151797166
0000500401117: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-115-8768
Protection

151158768
30909: RNCC: 5 | RNVC: 2
71-32-003-052: RNCC: 5 | RNVC: 2
30909: RNCC: 5 | RNVC: 9
30909: RNCC: 5 | RNVC: 9
71-32-003-052: RNCC: 5 | RNVC: 9
71-32-003-052: RNCC: 5 | RNVC: 9

1 Feb 1993

5340-15-114-7455
Panel

151147455
AS301-993: RNCC: 3 | RNVC: 2
AS301-993: RNCC: 5 | RNVC: 2
AS301-993: RNCC: 5 | RNVC: 9

4 Aug 1992

5340-15-105-5983
Staffa A Gomito

151055983
4603: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-106-2554
Sostegno El Piastra

151062554
0-49982: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-4840
Threaded End Tensioning Tie Rod

151204840
142519291: RNCC: 3 | RNVC: 2

9 Jun 1995

5340-15-113-1735
Tappocompleto

151131735
253A1128-001: RNCC: 3 | RNVC: 2

7 Oct 1990

5340-15-134-5868
Maniglia Chiusura P

151345868
205-1-141-03: RNCC: 3 | RNVC: 2
205-1-141-03: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-202-4280
Bobina Filo Acciaio

152024280
105.3289: RNCC: 3 | RNVC: 2
(241)A3648105.3289: RNCC: 5 | RNVC: 2

20 Mar 2007

5340-15-110-5186
Junction

151105186
9816383: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-065-0767
Luggage Bumper

150650767
F40100: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-138-2902
Fermo

151382902
10007109: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-134-5670
Barra

151345670
772159N: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-215-7546
Moschettone Protect

152157546
WA90: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-175-9322
Tappo Fascia Nnc40

151759322
NEWE61: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-179-6776
Hook

151796776
0177396: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-115-5348
Handwheel

151155348
D0471613: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-112-8156
Fondello

151128156
469534: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-4122
Resilient Mount

151154122
13157: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-136-7596
Inserto

151367596
V35151P: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-070-3051
Helical Compression Spring Seat

150703051
76/750/501: RNCC: 3 | RNVC: 2
76/750/501: RNCC: 5 | RNVC: 9

28 Aug 1978

5340-15-103-4455
Box

151034455
1276-19-100: RNCC: 3 | RNVC: 2
127619100: RNCC: 5 | RNVC: 2

30 May 1989

5340-15-060-1579
Access Cover Plate

150601579
1376-19-216: RNCC: 3 | RNVC: 2
137619216: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-156-7493
Piastrina Speciale

151567493
0-121974: RNCC: 3 | RNVC: 2
1PA39630-121974: RNCC: 5 | RNVC: 2

6 Mar 2003

5340-15-209-6646
Staffe Da Muro Per

152096646
ST 50 P: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-136-7114
Semicerniera

151367114
212-060-822-11: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-139-7075
Tassello Gomma

151397075
A.0035410: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-055-6587
Staffa Sinistra Per

150556587
546037: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-108-3217
Accesso Coperchio

151083217
70313: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-0429
Piastrina Speciale

151120429
275A0502-407: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-166-5190
Contenitore

151665190
2237434: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-117-0504
Bush

151170504
489011: RNCC: 3 | RNVC: 2
D0489011: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-063-0706
Cover Plate Access

150630706
8837294: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-187-5595
Bonded Housing

151875595
TAF-0033/01: RNCC: 3 | RNVC: 2

9 Apr 2009

5340-15-154-7525
Scatola Fascette Pl

151547525
ZMD98XX-PDR111: RNCC: 3 | RNVC: 2

17 Sep 2001

5340-15-182-8038
Inside Handly

151828038
008A5011-401: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-156-3695
Plugging Rod

151563695
(241)A3460CBD71329P01: RNCC: 3 | RNVC: 2
CBD71329P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-166-5099
Plate Locking

151665099
412344: RNCC: 1 | RNVC: 2
412344: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-231-1603
Piastrina

152311603
7649512: RNCC: 3 | RNVC: 2
534015E092419: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-103-6949
Flangia Posteriore

151036949
14333/T: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-120-6634
Resilient Mount

151206634
D0471521: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-006-5028
Electrical-Me Post

150065028
W002718A: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-062-9007
Fermo Per Fune

150629007
0-21616: RNCC: 3 | RNVC: 2

28 Aug 1981

5340-15-120-6471
Blocchetto Per Test

151206471
D0480015: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-182-6706
Tasselli

151826706
TASSELLI AV8: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-101-7825
Fascetta Speciale

151017825
SC32674.73S: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-101-4154
Assieme Leva

151014154
1576-06-023: RNCC: 3 | RNVC: 2
157606023: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-213-8778
Serratura Bordo Ton

152138778
B00576-45-03: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-147-8151
Squadretta Sinistra

151478151
2105-38-04: RNCC: 3 | RNVC: 2

24 Apr 1998

5340-15-136-1817
Tappo

151361817
94450005: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-189-4165
Anello

151894165
STD1698: RNCC: 3 | RNVC: 2

19 Feb 2010

5340-15-052-4878
Ammortizzatore

150524878
310SIMPA: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-5402
Handwheel

151125402
B6-180X14UNI6962-71: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-089-0640
Distanziale

150890640
6153342: RNCC: 3 | RNVC: 2
6153342: RNCC: 3 | RNVC: 2
6153342: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-121-4353
Electronic Equipment Hardware Kit

151214353
4/10721: RNCC: 3 | RNVC: 2
554100004031: RNCC: 5 | RNVC: 2

17 Oct 1996

5340-15-116-1590
Piastrinadibloccagg

151161590
DPR2378/3-65: RNCC: 3 | RNVC: 2

13 Oct 1993

5340-15-151-9839
Tirante

151519839
00153413: RNCC: 3 | RNVC: 2
0-153413: RNCC: 3 | RNVC: 2
(241)A39630-153413: RNCC: 5 | RNVC: 2
(241)A396300153413: RNCC: 5 | RNVC: 2

31 Jul 2000

5340-15-214-8365
Basetta Per Montant

152148365
35-35: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-153-1602
Tappo

151531602
W021463: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-15-148-9500
Support

151489500
880 63: RNCC: 3 | RNVC: 2
880 63: RNCC: 5 | RNVC: 9

9 Nov 1998

5340-15-074-4442
Turnbuckle

150744442
1C12UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-148-9855
Shroud

151489855
228 72: RNCC: 3 | RNVC: 2
228 72: RNCC: 5 | RNVC: 9

9 Nov 1998

5340-15-166-5160
Rotella In Gomma Ca

151665160
2368465: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-222-2434
Insert

152222434
LN29540B08: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-152-5127
Resilient Mount

151525127
60137390: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-105-5979
Staffa A Gomito

151055979
4972731: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-174-8594
Supporto A Mensola

151748594
MN1000/N: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-15-127-3659
Staffa

151273659
1413-31-036: RNCC: 3 | RNVC: 2
1413-31-036: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-100-2166
Chiusura In Gomma

151002166
GB10E-AN-GN01: RNCC: 3 | RNVC: 2
GB 019-090-300: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-052-9097
Forcella

150529097
204-4610-24-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-055-6461
Turnbuckle

150556461
1304-3-107V: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-001-8931
Pattino Di Metallo

150018931
8873/64/5015-18-6: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-109-2009
Resilient Mount

151092009
42088284: RNCC: 3 | RNVC: 2
0-114522: RNCC: 4 | RNVC: 1
42088284: RNCC: 4 | RNVC: 1
(241)A39630-114522: RNCC: 5 | RNVC: 2
1PA39630-114522: RNCC: 5 | RNVC: 2
(241)A424942088284: RNCC: 5 | RNVC: 2
1PA424942088284: RNCC: 5 | RNVC: 2
42088284: RNCC: 5 | RNVC: 2

23 Feb 1989

5340-15-222-2263
Pannello 1020X700

152222263
S1-124: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-198-6615
Corrosion Preventive Anode

151986615
DN250-DE267: RNCC: 3 | RNVC: 2

25 Oct 2004

5340-15-005-1504
Strip

150051504
986EL01Y: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-062-2533
Amplificatore 10 Mh

150622533
1.36255: RNCC: 5 | RNVC: 2
1.36255: RNCC: 5 | RNVC: 9

16 Sep 1998

5340-15-116-3921
Gancio Idr

151163921
23669-002B00: RNCC: 3 | RNVC: 2

4 May 1993

5340-15-216-0155
Coppia Pomi Per Por

152160155
COPPIAPOMI: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-112-3891
Asta Comando Aria

151123891
B0261511: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-071-0770
Handwheel

150710770
1013A46: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-054-5966
Turnbuckle Body

150545966
H17DE24: RNCC: 5 | RNVC: 2
H17DE24: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-136-9475
Morsetto

151369475
AN3125-4: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-136-9198
Guida

151369198
5F1-1-63: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-148-9297
Assieme Guida

151489297
2203-0017-001: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-15-109-6640
Fermocuscinetto

151096640
10-658-210: RNCC: 3 | RNVC: 2
10-658-210: RNCC: 5 | RNVC: 9

1 Mar 1990

5340-15-201-4760
Sonobuoy Electrical

152014760
N882G6004001: RNCC: 3 | RNVC: 2
(241)A0126N882G6004001: RNCC: 5 | RNVC: 2

27 Sep 2006

5340-15-206-7879
Assy Anchor Plate

152067879
4235092-00: RNCC: 3 | RNVC: 2

20 Jul 2012

5340-15-008-2708
Angolare

150082708
204-0950-45-3: RNCC: 3 | RNVC: 2

1 Feb 1982

5340-15-113-9419
Resilient Mount

151139419
781080: RNCC: 3 | RNVC: 2
190520158: RNCC: 5 | RNVC: 2

7 Aug 1993

5340-15-183-4103
Canalina Bianca

151834103
CABI40X17: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-204-8214
Integrazione Meccan

152048214
KIT/EOM.1147/B: RNCC: 3 | RNVC: 2
(241)A3028KIT/EOM.1147/B: RNCC: 5 | RNVC: 2

12 Jan 2012

5340-15-144-7430
Cus Loop Type Clamp

151447430
262A1257-001: RNCC: 3 | RNVC: 2

2 Jan 1997

5340-15-144-8781
Door Hinge

151448781
SH-5145-403-SL: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-210-6694
Linguetta A Disco

152106694
UNI6606-5X6.5: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-8511
Support

150018511
ED00881R0210-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-213-8771
Paletto Quadro Da S

152138771
PALETTO130MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-145-3100
Ritegno Guarnizione

151453100
129-0640-82-371: RNCC: 3 | RNVC: 2

7 Jul 1997

5340-15-188-1176
Plate

151881176
G2212120008-107: RNCC: 3 | RNVC: 2

14 Jul 2009

5340-15-143-3334
Tasca Inferiore Kin

151433334
0354-16606: RNCC: 3 | RNVC: 2
035416606: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-102-3113
Diversity Kit

151023113
141-1210/01: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-136-2714
Staffa Sostegno Rid

151362714
8513002: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-181-5290
Supporto Cardanico

151815290
3M6471: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-008-1858
Double Angle Bracket

150081858
60114826: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-109-4740
Nut And Bolt Locking Plate

151094740
1P 564629: RNCC: 3 | RNVC: 2
1P 564629: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-215-3928
Gancio A 'L' In Ott

152153928
3509088: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-111-5949
Coolbudy

151115949
A05124-01-20: RNCC: 3 | RNVC: 2
A05124-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-109-4420
Dispositivo Di Fiss

151094420
302-0027/01: RNCC: 3 | RNVC: 2

21 Apr 1989

5340-15-007-5000
Cover Plate Access

150075000
1239-01-158: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-074-4232
Turnbuckle

150744232
2C6UNI20190T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-106-8068
Piastrina

151068068
5086-03-43: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-041-8105
Terminale A Forcell

150418105
5-1955-101-45597: RNCC: 3 | RNVC: 2
5-1955-1-01-45597: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-065-5987
Semicerniera Comple

150655987
212-4600-13-6: RNCC: 3 | RNVC: 2

18 Dec 1981

5340-15-152-3817
Seat Pipe Support

151523817
0-112037: RNCC: 3 | RNVC: 2
00112037: RNCC: 3 | RNVC: 2
(241)A39630-112037: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-232-3822
Rondella Piatta

152323822
5387/14 3-12/13: RNCC: 3 | RNVC: 2
534015E150087: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-067-2791
Molla

150672791
S3-8065/1: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-189-2910
Kit Cerniere Per Po

151892910
FOS/SP-000003: RNCC: 3 | RNVC: 2
(241)AE591FOS/SP-000003: RNCC: 5 | RNVC: 2

11 Feb 2010

5340-15-060-4007
Tenditore Pieghevol

150604007
0601: RNCC: 3 | RNVC: 2

8 Feb 1977

5340-15-113-2516
Complessivo Flangia

151132516
345A4938-001: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-065-0029
Intermally Rod End

150650029
506-25-09-01A: RNCC: 3 | RNVC: 2

7 Sep 1984

5340-15-102-4835
D Speciale Supporto

151024835
01-261-14-901: RNCC: 3 | RNVC: 2

29 Jul 1987

5340-15-174-7457
Tondo P-Ot58pb4h20

151747457
53240-02/021: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-180-2870
Turnbuckle

151802870
6722-M14: RNCC: 3 | RNVC: 2
(241)A53606722-M14: RNCC: 3 | RNVC: 2

14 Apr 2008

5340-15-007-7177
Piastra Speciale

150077177
50090221-349: RNCC: 3 | RNVC: 2

15 Jul 1980

5340-15-151-9823
Staffa

151519823
0-153194: RNCC: 3 | RNVC: 2
00153194: RNCC: 3 | RNVC: 2
(241)A39630-153194: RNCC: 5 | RNVC: 2

31 Jul 2000

5340-15-151-1442
Assieme Staffa Di F

151511442
381-0353/01: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-15-113-2389
Piastrina

151132389
244A1536-001: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-151-6948
Mensola

151516948
0-171986: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-206-8044
Dust And Moisture Seal Protective Plug

152068044
ED0089900470-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-195-2240
Hub Sleeve Right Ha

151952240
3485413: RNCC: 3 | RNVC: 2
332/D3275: RNCC: 5 | RNVC: 2

7 Mar 2011

5340-15-041-2795
Distanziale

150412795
2-1023-100-21238-1: RNCC: 3 | RNVC: 2
2-1023-1-00-21238-1: RNCC: 5 | RNVC: 2

22 Nov 1970

5340-15-009-9015
Cover Plate Access

150099015
1236-19-112: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-222-2295
Porta Roller Shutte

152222295
S1-13B7: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-149-6171
Flange

151496171
518-38-1950: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-142-4882
Cappellotto

151424882
1024871: RNCC: 3 | RNVC: 2

9 Jun 1997

Load More Results