What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 56 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 56 of 72

5340-15-107-1835
Electrical-Me Post

151071835
C3822161X: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-067-2622
Guarnizione

150672622
600X450: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-103-0927
Resilient Mount

151030927
DE160.02.001: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.001: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-179-1374
Tappo Otturatore

151791374
16990670: RNCC: 3 | RNVC: 2
(241)A424916990670: RNCC: 5 | RNVC: 2

13 Jun 2006

5340-15-119-3410
Morsetto Per Guida

151193410
587331129T: RNCC: 3 | RNVC: 2

14 Jul 1994

5340-15-066-6117
Electrical-Me Post

150666117
65132: RNCC: 2 | RNVC: 2
65132F01: RNCC: 5 | RNVC: 2

24 Feb 1994

5340-15-101-7451
Piastra Non Forata

151017451
250X300X20DIS44125: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-139-4032
Tirante 308

151394032
4550069: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-122-2777
Guide Chaine

151222777
800053137: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-139-7797
Chiavistello

151397797
1000326: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-110-3840
Part

151103840
8-4UNI1736: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-166-5112
Fascetta 160Mm

151665112
FS160CC: RNCC: 3 | RNVC: 2
(7001)5340151665112: RNCC: 5 | RNVC: 2
FS160CW-C: RNCC: 5 | RNVC: 2

1 Nov 2002

5340-15-112-1381
Barrettaf

151121381
DE013.12.809: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-15-074-4199
Turnbuckle

150744199
2B6UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-119-7965
Left Support Comple

151197965
75218528: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-189-8150
Fascetta Serracavo

151898150
1703867: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-136-1837
Staffa

151361837
9053115: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-103-5667
Supporto Ad Angolo

151035667
P-120359-002: RNCC: 3 | RNVC: 2
P120359-002: RNCC: 5 | RNVC: 2

10 Apr 1989

5340-15-204-3458
Corrosion Preventive Anode

152043458
25010014: RNCC: 3 | RNVC: 2
(241)ACA6425010014: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-103-1810
Sottogruppo Flangia

151031810
DE004.00.974: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-105-4203
Cappuccio Parapolve

151054203
757359: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-104-8879
Fissaggio Gaffetta

151048879
4568642: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-175-0747
Protection Screen

151750747
8500626182: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-105-6376
Collare Serraggio

151056376
2533724: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-111-7670
Resilient Mount

151117670
04.040.401: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-112-1368
Supportofusibili

151121368
DE013.15.302: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-15-153-4102
Elettro-Me Raccordo

151534102
5176-249-00: RNCC: 3 | RNVC: 2

11 Jan 2001

5340-15-064-3488
Hook

150643488
42X119P103: RNCC: 3 | RNVC: 2

9 Jul 1984

5340-15-153-4497
Elastico Sostegno

151534497
1119157: RNCC: 3 | RNVC: 2

25 Jan 2001

5340-15-198-8830
Grooved Clamp Coupling

151988830
A117A1600: RNCC: 3 | RNVC: 2
(241)A0126A117A1600: RNCC: 5 | RNVC: 2
(241)A0126A117A160: RNCC: 5 | RNVC: 2

24 Nov 2004

5340-15-186-1225
Ruota In Gomma

151861225
MM100X40: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-116-9772
Slide Collar

151169772
W0001976: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-125-1021
Tappo

151251021
200012P1: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-179-1782
Adjustable Plate

151791782
RS 418 231 AE: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-110-3732
Schrifteinsat

151103732
F405C3A-144: RNCC: 3 | RNVC: 2
F405C3A-144: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-136-9417
Morsetto

151369417
45C26D18-24: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-008-3225
Resilient Mount

150083225
CB1380-12-C2: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-201-4537
An Bracket Assembly

152014537
212-1135-17-108: RNCC: 3 | RNVC: 2
(241)A0126212-1135-17-108: RNCC: 5 | RNVC: 2

18 Sep 2006

5340-15-154-8843
Rubber Bumper

151548843
25X3/70: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-15-122-2861
Carter Pompe Huile

151222861
800066845: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-108-2783
Speciale Coperchio

151082783
SA11913: RNCC: 3 | RNVC: 2

12 Oct 1989

5340-15-163-0258
Manual Control Lever

151630258
MOTO41030: RNCC: 3 | RNVC: 2

14 May 2002

5340-15-205-5103
Special Protezione

152055103
178940161: RNCC: 3 | RNVC: 2
(241)A0199178940161: RNCC: 5 | RNVC: 2

15 Mar 2012

5340-15-139-8061
Tirante Elastico

151398061
1001950: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-139-4361
Tirante

151394361
4699246: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-127-0935
Staffa Fissaggio Ba

151270935
386627: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-139-3247
Tassello

151393247
1392500: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-166-4839
Rinforzo

151664839
20503038521: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-136-9265
Fascetta

151369265
47-705-801-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-230-7358
Serratura

152307358
TLO20226: RNCC: 3 | RNVC: 2
534015E102668: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-109-8979
Obturator

151098979
469660: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-105-2078
Rubber Bumper

151052078
842381: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-162-9775
Bracket

151629775
60133318: RNCC: 3 | RNVC: 2

9 Apr 2002

5340-15-136-1816
Sfiato

151361816
99705001: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-063-6082
Cover Plate Access

150636082
4679052: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-063-9632
Padlock

150639632
4216: RNCC: 3 | RNVC: 2

2 Jan 1980

5340-15-127-6442
Molla Richiamo Asta

151276442
746913: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-182-8523
Morsetto Ortagonale

151828523
MORORT: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-127-1006
Molla Interna Per A

151271006
397558: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-213-8822
Contropiastra Regol

152138822
038-700-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-220-7717
Clevis

152207717
P62021CA-1-9: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-209-3960
Cerniera Mm 13

152093960
CERNIERAMM13: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-147-5156
Housing Special

151475156
31604-001: RNCC: 5 | RNVC: 2
31604-001: RNCC: 5 | RNVC: 9
31604-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-170-4285
Vary Hardware

151704285
D1315024: RNCC: 3 | RNVC: 2

16 Jan 2003

5340-15-153-4907
Blocco

151534907
D1420498: RNCC: 3 | RNVC: 2

2 Feb 2001

5340-15-110-2008
Handwheel

151102008
500UNI2418FEG38VR3158: RNCC: 2 | RNVC: 2

1 Jan 1994

5340-15-103-1962
Supporto

151031962
DE013.13.409: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-118-0287
Cuneo Per Guida Sn

151180287
D0384519: RNCC: 3 | RNVC: 2

14 Nov 1994

5340-15-060-2760
Electronic Equipment Hardware Kit

150602760
4-02327: RNCC: 3 | RNVC: 2

9 Feb 1977

5340-15-180-0980
Handle

151800980
2353-3: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-105-5968
Staffa A Gomito

151055968
002.2705.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-170-8867
Scharnier 1

151708867
TE301510: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-136-5940
Attacco

151365940
S6120-66181-0: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-174-7549
035 3 2Cu 0 Fr4 0

151747549
58572-05/126: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-109-5762
Double Angle Bracket

151095762
20530636A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-222-2186
Terminale Guaina

152222186
NS58063-2: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-158-6128
Speciale Tacco

151586128
122607609: RNCC: 3 | RNVC: 2

10 Mar 2004

5340-15-136-1136
Bracket Trottle Lev

151361136
22503499: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-008-2095
Tampone

150082095
A1-42038-011: RNCC: 3 | RNVC: 2
A1-42038-011: RNCC: 5 | RNVC: 9

1 Feb 1982

5340-15-001-4461
Pgb Prop Bra Crank

150014461
CTP68004G001: RNCC: 3 | RNVC: 2

3 Jul 2013

5340-15-166-4759
Anello

151664759
A31202: RNCC: 1 | RNVC: 2
A31202: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-118-6828
Valve Guide

151186828
1CMLM0008: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-120-4585
Assiemesupportospec

151204585
A145373-1: RNCC: 3 | RNVC: 2

29 May 1995

5340-15-150-4498
Assieme Coperchio S

151504498
30601-41000: RNCC: 3 | RNVC: 2

11 Nov 1999

5340-15-100-8007
Supporto Assieme

151008007
000900292900: RNCC: 5 | RNVC: 2
000900292900: RNCC: 5 | RNVC: 9

20 Nov 1986

5340-15-153-2768
Access Cover

151532768
1MO3919001: RNCC: 2 | RNVC: 3
125614218: RNCC: 5 | RNVC: 3

12 Dec 2000

5340-15-215-0502
Fischer

152150502
01997: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-203-8540
Bocchettone Di Rifo

152038540
377-032-007: RNCC: 1 | RNVC: 2
(241)A1823377-032-007: RNCC: 3 | RNVC: 2

7 Jul 2011

5340-15-151-1166
Staffa Per Tubazion

151511166
J26240112-401: RNCC: 3 | RNVC: 2

21 Mar 2000

5340-15-149-1535
Chiavistello Specia

151491535
2302-0036-001: RNCC: 3 | RNVC: 2

7 Dec 1998

5340-15-213-8253
Vite Standard Fissa

152138253
VITESTANDARD: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-231-0681
Piastra Attacco Sed

152310681
00301PMPN: RNCC: 3 | RNVC: 2
534015E146096: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-231-2401
Supporto

152312401
7775393: RNCC: 3 | RNVC: 2
534015E140058: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-103-8212

5340-15-100-8106
Semicerniera

151008106
109-0640-52-126: RNCC: 3 | RNVC: 2

26 Nov 1986

5340-15-153-8018
Dust Protective Cap

151538018
NOR497-22: RNCC: 3 | RNVC: 2
NOR497-22: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-219-7392
Cremonese Bond Oro

152197392
MANCRBONOR: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-197-6796
Protezione

151976796
530570: RNCC: 3 | RNVC: 2

20 Apr 2004

5340-15-009-6389
Squadretta Sagomata

150096389
167007P2: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-166-5043
Guide Cono In.Sh Ab

151665043
2302T347001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-105-6380
Collare Serraggio

151056380
4421170: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-102-7027
Dust And Moisture Seal Protective Cap

151027027
95913000: RNCC: 3 | RNVC: 2
0-111165: RNCC: 5 | RNVC: 2

10 Aug 1987

5340-15-215-5630
Puntimetallicisicut

152155630
0493G-6: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-074-4188
Turnbuckle

150744188
1B8UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-138-2877
Padlock

151382877
21010/30: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-198-4308
Access Door

151984308
122605029: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-203-1886
Access Door Assy

152031886
P75TC937A11-401: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-149-4001
Support

151494001
518-05-1750: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-189-5350
Fascetta

151895350
STSTG001-17-07: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-008-0203
Ritegno Trasparente

150080203
109-0310-27-25: RNCC: 3 | RNVC: 2

2 Sep 1981

5340-15-004-4236
Inserto Guida Molla

150044236
68313-101: RNCC: 3 | RNVC: 2

8 Mar 1978

5340-15-064-6814
Lock

150646814
C003004-209: RNCC: 3 | RNVC: 2

10 Jun 1984

5340-15-115-2350
Half Handle

151152350
1137-16-206: RNCC: 3 | RNVC: 2
113716206: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-120-8462
Bracket

151208462
301533: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-127-5989
Distanziale

151275989
986842: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-186-8244
Key Blank

151868244
LF22R: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-207-8607
Bumper

152078607
5801321445: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-061-5543
Threaded End Tensioning Tie Rod

150615543
000200318100: RNCC: 5 | RNVC: 2
000200318100: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-156-2028
Assy Base

151562028
(241)A3460CBD71151G01: RNCC: 3 | RNVC: 2
CBD71151G01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-137-2440
Perno

151372440
850330-101: RNCC: 3 | RNVC: 2
850330-101: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-118-2821
Leva Aggancio Cavo

151182821
D0485540: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-063-2664
Resilient Mount

150632664
42008225: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-110-2812
Bracket 30

151102812
P-135229-001: RNCC: 3 | RNVC: 2
P135229-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-190-9300
Clapm

151909300
P200945-5: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-153-7676
Base (1) Per Sosteg

151537676
01900A102360: RNCC: 5 | RNVC: 2
T0064887: RNCC: 5 | RNVC: 2
01900A102360: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-115-2769
Complete Lever

151152769
518330180: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-117-4003
Steering Wheel

151174003
D0466470: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-197-7257
Assieme Chiusura

151977257
129-0641-39-101: RNCC: 3 | RNVC: 2

21 Apr 2004

5340-15-166-4810
Matrice

151664810
58X407P003: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-110-2823
Bracket Pip

151102823
P120263-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-205-0610
Rete Frangisole

152050610
UG-FRANGISOLE: RNCC: 3 | RNVC: 2
(241)AD751UG-FRANGISOLE: RNCC: 5 | RNVC: 2

16 Feb 2012

5340-15-107-1994
Fibbia Speciale

151071994
3K41930080: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-105-6333
Collare Serraggio

151056333
4003522: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-119-7428
Suppor Plug

151197428
01TC20212: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-115-6985
Camma Segnalazione

151156985
D0466464: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-058-6745
Key Blank

150586745
NP17SN: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-187-4676
Angle Bracket

151874676
J28042157-001: RNCC: 3 | RNVC: 2

2 Apr 2009

5340-15-151-4636
Piastrina

151514636
NAMS0170300: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-118-0409
Piastrina Antisvita

151180409
D0484630: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-15-125-3949
Asta Per Maniglione

151253949
ASTA/MANIGLIONE: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-057-6847
Tacchetto Ammortizz

150576847
4236-1020: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-115-1958
Actuating Arm

151151958
395-8785-070: RNCC: 3 | RNVC: 2
82-00775: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-000-5791
Profile

150005791
C0090293: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-15-175-1435
Dust And Moisture Seal Protective Cap

151751435
3AL79269AA**: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-121-8702
Clip

151218702
246-03.0717: RNCC: 3 | RNVC: 2
AKU1006: RNCC: 5 | RNVC: 2
246-03.0717: RNCC: 5 | RNVC: 2

12 Mar 1996

5340-15-117-4079
Piastra Supporto Sp

151174079
D1405569: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-122-2821
Nonmetallic Bumper

151222821
800058314: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-213-7317
Maniglia Master Ral

152137317
GS2452RAL: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-148-6666
Access Cover

151486666
190540188: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-007-3935
Escutcheon Plate

150073935
1391690: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-148-6693
Screw Threa Insert

151486693
M14X1,5X1,5D: RNCC: 3 | RNVC: 2
210002545: RNCC: 5 | RNVC: 2

17 Sep 1998

5340-15-009-0624
Resilient Mount

150090624
1356472: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-112-0507
Dispositivo Di Supp

151120507
244A2223-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-212-0204
Lucchetto 'Ala' Da

152120204
LUCCHETTOALA60MM: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-201-9675
Riparo Sx

152019675
79081839: RNCC: 3 | RNVC: 2
(241)AD75179081839: RNCC: 5 | RNVC: 2
79081839: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-15-113-2989
Supporto

151132989
1Z 591502: RNCC: 3 | RNVC: 2
1Z 591502: RNCC: 5 | RNVC: 9

10 Dec 1993

5340-15-175-0213
Handwheel

151750213
(241)A0773M72991108: RNCC: 3 | RNVC: 2
M380007090: RNCC: 3 | RNVC: 2
M72991108: RNCC: 3 | RNVC: 2

21 Nov 2003

5340-15-175-0388
Distance Piece

151750388
14156: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-160-7761
Padlock

151607761
F720153081: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-116-4985
Rubber Bumper

151164985
60149379: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-151-4609
Cricchetto Fermasca

151514609
UCFX0010000: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-106-0064
Piastra Bloccaggio

151060064
3552151: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-220-0508
Lam.Elcom Sys Lg100

152200508
S1-145A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-134-4034
Staffa

151344034
4651330: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-5024
Retainer

151665024
36275: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-200-0607
Dust And Moisture Seal Protective Cap-Plug

152000607
13HJ04643008S01-405-16: RNCC: 3 | RNVC: 2

19 Sep 2005

5340-15-107-1721
Left Hand Hinge

151071721
RS412163A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-110-1359
Antivibrante

151101359
4643918: RNCC: 3 | RNVC: 2

29 Jul 1990

5340-15-147-5135
Assieme Adattatore

151475135
20381-001: RNCC: 5 | RNVC: 2
20381-001: RNCC: 5 | RNVC: 9
20381-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-202-2333
Gripping

152022333
265A0068-005: RNCC: 3 | RNVC: 2
(241)A0019265A0068-005: RNCC: 5 | RNVC: 2

13 Feb 2007

5340-15-193-9607
Protection

151939607
109-0881-12-114: RNCC: 3 | RNVC: 2

3 Aug 2010

5340-15-149-1804
Speci Chiavistello

151491804
2302-0331-001: RNCC: 3 | RNVC: 2

15 Dec 1998

5340-15-116-3958
Piastraritegnorotor

151163958
288888811: RNCC: 3 | RNVC: 2
(7001)5340151163958: RNCC: 8 | RNVC: 2

4 Oct 1993

5340-15-120-5950
Helical Compression Spring Seat

151205950
1288548: RNCC: 3 | RNVC: 2

5 Jul 1995

5340-15-102-0340
Nonrotating Shaft Eye Bracket

151020340
0919T01: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-007-2667
Supporto

150072667
1383783: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-106-3228
Staffa

151063228
815901: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-117-7279
Control Rod

151177279
142502924: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-170-3946
Cover

151703946
321305-P25: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-068-2303
Anchor Strap

150682303
W011831: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-068-3341
Maniglia Di Bloccag

150683341
OD143Z024: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-109-1542
Blocchetto Arresto

151091542
100900327600: RNCC: 5 | RNVC: 2
100900327600: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-15-195-1791
Cap

151951791
56925190: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-111-6034
Holder

151116034
A02705-01-20: RNCC: 3 | RNVC: 2
A02705-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-152-1019
Alloggiamento

151521019
60137426: RNCC: 3 | RNVC: 2

7 Aug 2000

5340-15-118-6052
Bras

151186052
73134312: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-192-4116
Dadi E Kit Bulloni

151924116
TC21-000010: RNCC: 3 | RNVC: 2
(241)AE591TC21-000010: RNCC: 5 | RNVC: 2

16 Mar 2010

5340-15-163-1203
Clip

151631203
1313393080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-139-7982
Catenella Completa

151397982
1001711: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-149-6003
Bracket Assy

151496003
1230-32-905: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-218-0673
Barra Antipanico

152180673
945864: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-199-6654
Control Rod

151996654
8870791: RNCC: 3 | RNVC: 2
(241)A42498870791: RNCC: 5 | RNVC: 2

17 May 2005

5340-15-117-0269
Clevis And U-Bolt

151170269
533.17085.3: RNCC: 3 | RNVC: 2
533.17085.3: RNCC: 5 | RNVC: 2

28 Jul 1993

5340-15-145-2717
Spring Guide

151452717
25113-7: RNCC: 3 | RNVC: 2
25113-7: RNCC: 5 | RNVC: 9

23 Jun 1997

5340-15-102-1620
Fi Testa Di Tirante

151021620
3121/B: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-136-2589
Tappo Olio Riduttor

151362589
S00115100000: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-006-0140
Anchor Strap

150060140
B512TL159: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-156-3393
Half Rings

151563393
(241)A3460CBD71246P01: RNCC: 3 | RNVC: 2
CBD71246P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-074-4008
Turnbuckle

150744008
1A6UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-114-7872
Support

151147872
904.8866.018: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-068-2564
Dispositivo Di Chiu

150682564
RS 402 362 B: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-210-9530
Fascette Serracavo

152109530
4/11662: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-161-0556
Lucchetto S&G

151610556
F720183371: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-179-0793
Liquid Holding Unit Filler Neck

151790793
CS00002521705: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-003-1421
Spacing Threaded Standoff

150031421
5949792259: RNCC: 3 | RNVC: 2

29 Oct 2013

5340-15-106-8132
Fascia Fissaggio Se

151068132
740991: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-5415
Supporto Leva Coman

151155415
D0469591: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-207-0336
Asta Laterale

152070336
4-5120: RNCC: 3 | RNVC: 2
(241)AF0514-5120: RNCC: 5 | RNVC: 2

16 Aug 2012

5340-15-197-8794
Ghiera Conica Giran

151978794
VS-10-1614-144/A: RNCC: 3 | RNVC: 2

24 May 2004

5340-15-180-3955
Protection Net

151803955
N925G9179201: RNCC: 3 | RNVC: 2

12 May 2008

5340-15-149-6086
Lever

151496086
518-04-2280: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-218-8529
Lucchetto Yale

152188529
140.160: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-105-6323
Collare Serraggio

151056323
1366198: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-113-2539
Compless Protezione

151132539
377A2047-401: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-180-1223
Bracket

151801223
HR37017: RNCC: 3 | RNVC: 2

28 Jan 2008

5340-15-193-3304
Quick Release Adapt

151933304
323: RNCC: 3 | RNVC: 2
323: RNCC: 5 | RNVC: 2

4 May 2010

5340-15-112-0426
Dispositivo Di Supp

151120426
275A0611-405: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-112-4143
Hangar

151124143
278459P1: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-120-8395
Belt

151208395
7M500: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-115-9146
Helical Compression Spring Retainer

151159146
320092F01: RNCC: 3 | RNVC: 2
320092F01: RNCC: 5 | RNVC: 2

1 Feb 1993

5340-15-187-2294
Assieme Cerniera

151872294
A4451: RNCC: 3 | RNVC: 2
(241)A7904A4451: RNCC: 5 | RNVC: 2

26 Feb 2009

5340-15-109-8966
Gruppo Otturatore

151098966
388898: RNCC: 3 | RNVC: 2
D0388898: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-155-6328
Special Protezione

151556328
587086234400: RNCC: 2 | RNVC: 3

6 May 2002

5340-15-115-5446
Limitatore Di Corsa

151155446
D0468456: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-118-0335
Cuneo Di Bloccaggio

151180335
467920: RNCC: 3 | RNVC: 2
D0467920: RNCC: 3 | RNVC: 2

14 Dec 1994

5340-15-112-8380
Forcella

151128380
466806: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-149-8117
Spacing Threaded Standoff

151498117
129664: RNCC: 3 | RNVC: 2
0052601: RNCC: 5 | RNVC: 2

2 Jun 1999

5340-15-206-9674
Collare

152069674
13433108: RNCC: 3 | RNVC: 2
(241)A293013433108: RNCC: 5 | RNVC: 2

2 Aug 2012

5340-15-113-0779
Chiavistello Specia

151130779
263A1730-001: RNCC: 3 | RNVC: 2

19 Jun 1991

5340-15-199-6783
Flangia

151996783
42471259: RNCC: 3 | RNVC: 2
(241)A424942471259: RNCC: 5 | RNVC: 2

17 May 2005

5340-15-151-1634
Leopard Eye Cup

151511634
8854 212-101: RNCC: 3 | RNVC: 2
8854212-101: RNCC: 3 | RNVC: 2

12 Apr 2000

5340-15-194-8725
Cover Assembly

151948725
3170923: RNCC: 3 | RNVC: 2
10/906607: RNCC: 5 | RNVC: 2

27 Jan 2011

5340-15-003-7361
Luggage( Tray Clamp

150037361
04-6420: RNCC: 3 | RNVC: 2
(241)A017004-6420: RNCC: 5 | RNVC: 2

20 Nov 2013

5340-15-116-9645
Rage

151169645
W019748: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-089-9371
Dust And Moisture Seal Protective Cap

150899371
A30539-8: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-074-4183
Turnbuckle

150744183
2A30UNI2019AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-166-5191
Attacco

151665191
S6132801391: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-4955
Fascetta

151664955
4273C1157M: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-007-0734
Fascetta Speciale

150070734
0-02299: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-005-6524
Coperchio Speciale

150056524
0-31487: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-212-2155
Tasselli

152122155
SBN9-2: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-169-3593
Lucchetto S&G

151693593
F72011000: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-112-8456
Bussola

151128456
467378: RNCC: 3 | RNVC: 2
D0467378: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-216-9346
Padlock

152169346
00134: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-216-8765
Supporto

152168765
9943709: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-139-7819
Chiavistello

151397819
1000603: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-123-5689
Retainer Assy

151235689
99A398P001: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-148-7505
Sede Speciale

151487505
2104-0043-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-170-3306
Bracket

151703306
204-6350-41-10: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-141-4412
Lastra

151414412
W015556: RNCC: 3 | RNVC: 2
(7001)5340151414412: RNCC: 5 | RNVC: 2

9 Jun 1997

5340-15-174-9066
Staffa Attivazione

151749066
UT/SA/00044: RNCC: 3 | RNVC: 2

17 Oct 2003

5340-15-202-7788
Compasso Ferma-Port

152027788
A.7914-A2: RNCC: 3 | RNVC: 2
(241)A7904A.7914-A2: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-15-078-0839
Morsetto

150780839
TM01-63-101: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-197-7299
Dust And Moisture Seal Protective Cap

151977299
DDED7275-02: RNCC: 3 | RNVC: 2
DDED7275-02: RNCC: 5 | RNVC: 2

22 Apr 2004

5340-15-116-7490
Rotella Di Scorrime

151167490
30-08-149: RNCC: 3 | RNVC: 2

24 Jun 1993

5340-15-187-2148
Adattatore

151872148
157635133: RNCC: 3 | RNVC: 2
(241)A0199157635133: RNCC: 5 | RNVC: 2

25 Feb 2009

5340-15-193-2513
Piastra Di Montaggi

151932513
504236889: RNCC: 3 | RNVC: 2
(241)A4249504236889: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-15-114-7326
Ghiera

151147326
D0491124: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-123-5690
Damper Vibration

151235690
344MR026P003: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-121-6189
Anchor Strap

151216189
80A049707: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-004-4927
Double Angle Bracket

150044927
DT12856-3: RNCC: 3 | RNVC: 2
DT12804: RNCC: 5 | RNVC: 2

31 Jan 1978

5340-15-118-4323
Mensola Fanale Post

151184323
60153544: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-074-4014
Turnbuckle

150744014
1A22UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-144-6638
Staffa Elastica

151446638
6337109D: RNCC: 3 | RNVC: 2
7463100J: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-074-4350
Turnbuckle

150744350
1C12UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-166-5253
Serratura Cisa

151665253
501716008: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-232-0201
Chiave Tappo Serbat

152320201
184527: RNCC: 3 | RNVC: 2
534015E078077: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-116-2049
Supportocompleto

151162049
121103029: RNCC: 3 | RNVC: 2

25 Mar 1993

5340-15-166-4787
Spina Di Sicurezza

151664787
BLS4BA05SF: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-137-5652
Lucchetto A Combina

151375652
6371: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-178-0020
Chiusura A Maniglia

151780020
629/B: RNCC: 3 | RNVC: 2
(241)A1829629/B: RNCC: 5 | RNVC: 2

25 Aug 2004

5340-15-170-6187
Handle

151706187
15NN2013-4: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-057-4163
Rubber Bumper

150574163
C245422C: RNCC: 5 | RNVC: 2
C245422C: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-153-4029
Elettro-Me Raccordo

151534029
5137-402-09: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-123-6220
Redance Per Fune Me

151236220
2230-14: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-156-3620
Tip Protection Assy

151563620
(241)A3460CBD71200G01: RNCC: 3 | RNVC: 2
CBD71200G01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-074-4235
Turnbuckle

150744235
1D6UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-007-9517
Rubber Bumper

150079517
4438120: RNCC: 3 | RNVC: 2
4438120: RNCC: 5 | RNVC: 9

22 Sep 1979

5340-15-148-9248
Riparo In Lamiera C

151489248
60186055: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-15-152-3494
Staffa

151523494
0-153500: RNCC: 3 | RNVC: 2

4 Sep 2000

5340-15-211-8773
Pannello Con Panno

152118773
NB2002A: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-134-6374
Control Rod

151346374
2740-17: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-213-8884
Cilindro Da Infilar

152138884
08210-13-00: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-061-4555
Telaio E Rete Assie

150614555
163GDA1: RNCC: 5 | RNVC: 2
163GDA1: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-157-4898
Anemometro

151574898
8.001.001: RNCC: 3 | RNVC: 2

2 Sep 2003

5340-15-151-9402
Staffa

151519402
0-173959: RNCC: 3 | RNVC: 2

26 Jul 2000

5340-15-062-6131
Helical Compression Spring Retainer

150626131
8273725: RNCC: 3 | RNVC: 2

26 Nov 1981

5340-15-153-3033
Headless Straight Rod

151533033
122605209: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-15-105-8190
Sostegno Elastico

151058190
42007487: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-045-4438
Forcella

150454438
784-12-27-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-009-7081
Cover

150097081
1236-09-103: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-045-4274
Forcella Regolabile

150454274
N0R5-224-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-153-7350
Testa Di Tirante Fi

151537350
142057176: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-155-1738
Non Metall Paraurto

151551738
Y0032: RNCC: 3 | RNVC: 2
03-637-B-3: RNCC: 3 | RNVC: 2

28 Jan 2002

5340-15-055-6540
Squadretta Centrale

150556540
545083: RNCC: 3 | RNVC: 2

10 Apr 1972

5340-15-162-2616
Spacing Threaded Standoff

151622616
2540532: RNCC: 3 | RNVC: 2
CAE00069: RNCC: 5 | RNVC: 2

17 May 2001

5340-15-195-2038
Manual Control Lever

151952038
70741088: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-103-1993
Speciale Snodo

151031993
SIKAC 6M: RNCC: 3 | RNVC: 2
030.54.003: RNCC: 5 | RNVC: 2
922/01600: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-055-6183
Staffetta

150556183
677539: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-203-0409
Pastiglia

152030409
033090134: RNCC: 3 | RNVC: 2
(241)A5009033090134: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-104-8857
Fissaggio Gaffetta

151048857
1366987: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-121-2149
Staffa Sostegno

151212149
22947-101A01: RNCC: 3 | RNVC: 2
22947-101A1: RNCC: 3 | RNVC: 2

23 Oct 1995

5340-15-114-7302
Busta Di Frenatura

151147302
D0491091: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-230-5863
Ruota Fissa Per Car

152305863
0000123: RNCC: 3 | RNVC: 2
534015E149362: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-148-2809
Assieme Tappo Destr

151482809
PNE208002-002: RNCC: 3 | RNVC: 2

20 Jul 1998

5340-15-112-4200
Handle

151124200
3-26028.0001//D: RNCC: 5 | RNVC: 2
3-26028.0001//D: RNCC: 5 | RNVC: 9

7 Sep 1989

5340-15-203-0239
Side Handle

152030239
1610/6: RNCC: 3 | RNVC: 2
(241)A52001610/6: RNCC: 5 | RNVC: 2

15 Nov 2007

5340-15-218-3433
Scovolino Nylon D.

152183433
D15X300: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-2081
Plate

151562081
CBD71211P03: RNCC: 3 | RNVC: 2
(241)A3460CBD71211P03: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-156-1083
Montante

151561083
N636G1005201: RNCC: 3 | RNVC: 2

22 Nov 2002

5340-15-214-8505
Maniglia Completa

152148505
ART56: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-155-1178
Resilient Mount

151551178
142037220: RNCC: 3 | RNVC: 2

18 Jan 2002

5340-15-157-3910
Half-Hinge

151573910
190509316: RNCC: 2 | RNVC: 3

4 Jul 2003

5340-15-068-6982
Luggage Bumper

150686982
91652020: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-101-6836
Access Cover

151016836
631.95.7050: RNCC: 3 | RNVC: 2
2644 006 000: RNCC: 5 | RNVC: 2
2644006000: RNCC: 5 | RNVC: 2

19 Jul 1988

5340-15-107-1184
Nonrotating Shaft Eye Bracket

151071184
301-01-8020: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-148-9294
Speciale Piastra

151489294
2203-0021-001: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-15-237-3808
Catenaccio Vertical

152373808
44855-70: RNCC: 3 | RNVC: 2
534015E089519: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-153-7208
Handwheel

151537208
VCR372/70-8X8: RNCC: 3 | RNVC: 2
142025128: RNCC: 5 | RNVC: 2

22 Feb 2001

5340-15-118-0439
Puntale Di Regolazi

151180439
D0487553: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-107-1724
Insert

151071724
RS412770A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-127-6768
Molla Richiamo Gana

151276768
4048763: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-179-0194
Snap Hook

151790194
053631: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-156-2040
Bracket

151562040
CBD71205P02: RNCC: 3 | RNVC: 2
(241)A3460CBD71205P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-120-6474
Cannotto Per Flangi

151206474
D0487058: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-219-9575
Carrucola In Ottone

152199575
CARRUCOLA50MM CON GANCIO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-112-8388
Headless Grooved Rod

151128388
466852: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-163-1668
Support

151631668
9627018180: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-007-2038
Rubber Bumper

150072038
1391014: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-112-8233
Puntalinoperv

151128233
466458: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-2311
Sector

151152311
518023730: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-181-0716
Reinforcement Ring

151810716
N925G1570201: RNCC: 3 | RNVC: 2

15 Oct 2008

5340-15-149-3737
Cover

151493737
518-30-2360: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-183-2738
Staffa

151832738
1315408080: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-115-5416
Supporto Per Leva

151155416
D0469590: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-115-7005
Occhiello

151157005
D1401005: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-151-7536
Cuffia Di Protezion

151517536
A2884700: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-138-8056
Salvamano In Plasti

151388056
20300: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-108-5885
Resilient Mount

151085885
MM113002: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-103-2294
Pad

151032294
5.271.403: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-116-9612
Panel

151169612
W019444: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-141-1197
Collare Serraggio 3

151411197
1132: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-105-6352
Collare Serraggio

151056352
0-49077: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-104-8899
Fissaggio Gaffetta

151048899
044.1677.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-152-9128
Staffa (1) Accessor

151529128
77792F92: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-119-7618
Bott Cover

151197618
320905-P1: RNCC: 3 | RNVC: 2
320905-P1: RNCC: 5 | RNVC: 2
320905-P1: RNCC: 5 | RNVC: 9

17 Nov 1994

5340-15-194-3922
Doubler

151943922
109-0371-47-135: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-109-5482
Sadd Pipe Support

151095482
D25: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-3363
Resilient Mount

151183363
60142969: RNCC: 3 | RNVC: 2

18 May 1994

5340-15-201-9658
Riparo

152019658
79101129: RNCC: 3 | RNVC: 2
79101129: RNCC: 5 | RNVC: 2
(241)AD75179101129: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-15-107-4486
Turnbuckle Body

151074486
1233010458: RNCC: 3 | RNVC: 2
1233010458: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-157-0371
Control Rod

151570371
58683: RNCC: 3 | RNVC: 2
(241)A017858683: RNCC: 5 | RNVC: 2

14 Apr 2003

5340-15-003-9066
Stand Base

150039066
182741015: RNCC: 3 | RNVC: 2
(241)A0199182741015: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-180-9211
Angle Bracket

151809211
120020382: RNCC: 3 | RNVC: 2
(241)A5009120020382: RNCC: 5 | RNVC: 2

8 Aug 2008

5340-15-211-4397
Tappo A Lamelle

152114397
575020: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-122-9298

5340-15-105-8378
Banda Accop Boccola

151058378
2.4629.022.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-153-6832
Base (1) Per Sosteg

151536832
142063315: RNCC: 3 | RNVC: 2

20 Feb 2001

5340-15-106-9556
Supporto

151069556
2544-2: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-2935
Guard

151152935
125531023: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-001-8708
Tappo Antipolvere

150018708
30FCAP13ZKRM3: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-143-8101
Bottone

151438101
744109R: RNCC: 3 | RNVC: 2
T2S900: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-203-7198
Cap

152037198
58100342: RNCC: 3 | RNVC: 2

27 Jun 2011

5340-15-000-7275
Dust And Moisture Seal Protective Plug

150007275
BRP-0316337: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-117-4242
Complessi Supporto

151174242
142514924: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-215-7279
Inserto

152157279
KNKL: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-201-2954
Saldato Gancio

152012954
122607974: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-213-8755
Regolatore Spessora

152138755
MA4560: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-220-1126
Piombo In Pasticche

152201126
PIOMBINO10MM: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-001-7221
Anello Di Riduzione

150017221
01-07-114-2/F-C: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-139-9184
Ammortizzato Staffa

151399184
A31SF: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-068-1858
Giunto Sferico Spec

150681858
476712: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-074-4128
Turnbuckle

150744128
2C36UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-119-9770
Nonrotating Shaft Eye Bracket

151199770
76948F01: RNCC: 3 | RNVC: 2
76948F01: RNCC: 5 | RNVC: 9

28 May 1996

5340-15-007-3421
Fascetta Speciale

150073421
0-28622: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-105-6027
Staffa A Gomito

151056027
4987863: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-006-2557
Guida Speciale

150062557
0-28890: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-232-3700
Staffa

152323700
TD161SF: RNCC: 3 | RNVC: 2
534015E097428: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-000-3566
Shop Set Installation Hardware Kit

150003566
5387.FI.03.0029: RNCC: 3 | RNVC: 2

25 Feb 2013

5340-15-100-9946
Threaded End Tensioning Tie Rod

151009946
12709: RNCC: 3 | RNVC: 2

27 Oct 1986

5340-15-148-4451
Dust And Moisture Seal Protective Cap-Plug

151484451
CACHEM12: RNCC: 3 | RNVC: 2
CAE00205: RNCC: 5 | RNVC: 2

11 Aug 1998

5340-15-178-2289
Anode Retaining Plug

151782289
1Z 593278-22: RNCC: 3 | RNVC: 2
1Z 593278-22: RNCC: 5 | RNVC: 9

11 Mar 2005

5340-15-007-7361
Resilient Mount

150077361
4687640: RNCC: 3 | RNVC: 2
81677: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-116-8606
Indice Per Asta Gra

151168606
D1402595: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-119-7687
Synchro Clamp

151197687
TN4-0023-031-16: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-152-8007
Maniglia Ad Arco

151528007
P300108: RNCC: 3 | RNVC: 2

26 Oct 2000

5340-15-062-2051
Stop Plate

150622051
P894818-003: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-218-2536
Gancio Pannello For

152182536
B-05: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-176-0139
Inserto A Taglio La

151760139
F5604: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-166-4823
Supporto

151664823
2040309601001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5188
Fascetta Serracavo

151665188
390274: RNCC: 3 | RNVC: 2
(241)AA136390274: RNCC: 5 | RNVC: 2

1 Nov 2002

5340-15-116-9758
Box

151169758
W018239: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-063-3165
Double Angle Bracket

150633165
60114984: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-204-3546
Pipe Hanger Extension Bar

152043546
16567651: RNCC: 3 | RNVC: 2
(241)ACA6416567651: RNCC: 5 | RNVC: 2

25 Oct 2011

5340-15-120-8698
Piastra Di Montaggi

151208698
109-0743-80-109: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-108-0688
Nylongleitsch

151080688
6SA SP.MM1 ERTALON BIANCO: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-118-0341
Piastrina Di Antisv

151180341
D0467949: RNCC: 3 | RNVC: 2

1 Dec 1994

5340-15-198-5761
Control Rod

151985761
1001519963: RNCC: 3 | RNVC: 2
(241)A97721001519963: RNCC: 5 | RNVC: 2

15 Oct 2004

5340-15-150-6591
Band Retainer

151506591
404470-10: RNCC: 3 | RNVC: 2

20 Dec 1999

5340-15-136-9420
Morsetto

151369420
45C26D16-12: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-133-1679
Bussola Di Bloccagg

151331679
0138151: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-193-9491
Dust And Moisture Seal Protective Cover

151939491
IMB0011: RNCC: 3 | RNVC: 2

2 Aug 2010

5340-15-154-9217
Ring

151549217
CBD70754P05: RNCC: 3 | RNVC: 2

12 Nov 2001

5340-15-115-5435
Staffa Porta Morset

151155435
D0472486: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-230-1780
Hose Coup. Bracket

152301780
678085: RNCC: 3 | RNVC: 2
534015E149984: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-237-7418
Regolo Mobile Mm.15

152377418
510.415.01: RNCC: 3 | RNVC: 2
534015E082740: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-153-7086
Piastra Bloccaggio

151537086
142016280: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-181-7508
Fascetta Metallica

151817508
A103130: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-115-5459
Portello Interno

151155459
D0485660: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-200-8755
Lucchetto Di Sicure

152008755
8077AD: RNCC: 3 | RNVC: 2
8077AD: RNCC: 3 | RNVC: 2

23 Mar 2006

5340-15-151-7562
Fitting

151517562
J52850751-004: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-055-7710
Access Cover Plate

150557710
50041006: RNCC: 3 | RNVC: 2

16 Dec 1973

5340-15-115-6935
Handwheel

151156935
D0468770: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-115-5413
Filetto Riportato

151155413
D0554789: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-066-4444
Dust And Moisture Seal Protective Cap

150664444
65.60.064.0: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-163-1637
Support

151631637
9946552: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-204-3781
Dust And Moisture Seal Boot

152043781
0301875: RNCC: 3 | RNVC: 2
0301875: RNCC: 5 | RNVC: 2

26 Oct 2011

5340-15-063-3408
Double Angle Bracket

150633408
60109076: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-153-8038
Clamp

151538038
4130-12: RNCC: 3 | RNVC: 2
4130-12: RNCC: 5 | RNVC: 9

28 Feb 2001

5340-15-005-6153
Anello Elastico Spe

150056153
0-10380: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-115-6082
Flangia Di Attacco

151156082
D0486167: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-213-3735
Cilindro Corbin

152133735
PC50: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-213-8249
Barra Orizzontale O

152138249
07007-14: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-007-9169
Rubber Bumper

150079169
4554644: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-101-4311
Corredo Modifica

151014311
AER1CPD808-210: RNCC: 3 | RNVC: 2

21 May 1988

5340-15-178-2882
Handwheel

151782882
FKAA152410GOA PART 440: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-112-3885
Lamiera Di Protezio

151123885
B0222981: RNCC: 3 | RNVC: 2

1 Jul 1990

5340-15-108-0777
Metal Runner

151080777
32-03-014: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-194-1544
Staffa A Soffitto P

151941544
04326: RNCC: 3 | RNVC: 2
(241)AA04504326: RNCC: 5 | RNVC: 2

24 Sep 2010

5340-15-120-6392
Dust And Moisture Seal Protective Cap-Plug

151206392
D0467247: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-051-8278
Chiave A Paletta

150518278
NP70: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-151-1906
Traversa Supporto P

151511906
IAXX0191201: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-231-4956
Staffa

152314956
0-185320: RNCC: 3 | RNVC: 2
534015E154370: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-101-4151
Helical Compression Spring Retainer

151014151
1576-06-250: RNCC: 3 | RNVC: 2
157606250: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-109-5480
Sadd Pipe Support

151095480
D32: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-113-9425
Nonmetallic Solid Wheel

151139425
84.185.750: RNCC: 3 | RNVC: 2

7 Aug 1993

5340-15-205-2668
Lock-Release Lever

152052668
76030594: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-063-0712
Dust And Moisture Seal Protective Plug

150630712
8837309: RNCC: 3 | RNVC: 2

15 Jun 1982

5340-15-139-4124
Tassello

151394124
4628585: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-149-2503
Serratura Completa

151492503
137SR-002-N000: RNCC: 3 | RNVC: 2

5 Jan 1999

5340-15-203-2426
Manual Control Handle

152032426
32HJ04543413S01-801-038N: RNCC: 3 | RNVC: 2

10 Dec 2007

5340-15-182-5587
Maniglia Con Serrat

151825587
6012: RNCC: 3 | RNVC: 2
OME6012: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-074-4214
Turnbuckle

150744214
1C12UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-150-5869
Assieme Bussola

151505869
A81272-01-08: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-137-3155
Complessivo Asta

151373155
NAS356-81-940: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-232-2015
Portagomma Maschio

152322015
17.306.01: RNCC: 3 | RNVC: 2
534015E151336: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-115-2807
Hook

151152807
518053120: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-149-4057
Cover

151494057
518-03-1670: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-101-3683
Handwheel

151013683
6243-7-V: RNCC: 3 | RNVC: 2

13 Jun 1994

5340-15-142-6719
Resiliente

151426719
TSZ TIPO R: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-190-8931
Stop A Muro Da Mm.1

151908931
LIVIA1925: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-120-6505
Blocchetto Intercet

151206505
D0391795: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-101-7635
Resilient Mount

151017635
45023714: RNCC: 3 | RNVC: 2

11 May 1987

5340-15-148-6676
Rubber Bumper

151486676
1M00523012: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-089-1489
Snap Hook

150891489
6153351: RNCC: 3 | RNVC: 2
6153351: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-193-1353
Cover

151931353
00241R0140: RNCC: 3 | RNVC: 2

19 Apr 2010

5340-15-119-9855
Helical Compression Spring Retainer

151199855
312312F01: RNCC: 3 | RNVC: 2
312312F01: RNCC: 5 | RNVC: 9

29 May 1996

5340-15-121-9642
Threaded End Tensioning Tie Rod

151219642
042566: RNCC: 3 | RNVC: 2

2 Apr 1996

5340-15-118-7651
Nut And Bolt Locking Plate

151187651
4600190: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-112-8402
Headless Grooved Rod

151128402
471156: RNCC: 3 | RNVC: 2
D0471156: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-118-0866
Control Rod

151180866
D0467936: RNCC: 3 | RNVC: 2

16 Dec 1994

5340-15-003-4476
Headless Straight Rod

150034476
55351282AD: RNCC: 3 | RNVC: 2
(241)A424955351282AD: RNCC: 5 | RNVC: 2

13 Nov 2013

5340-15-114-1861
Resilient Mount

151141861
12128: RNCC: 3 | RNVC: 2

19 May 1995

5340-15-109-3546
Ingrassatorecomplet

151093546
OP-08.38: RNCC: 3 | RNVC: 2

16 Oct 1989

5340-15-115-1957
Actuating Arm Suppt

151151957
560-3521-038: RNCC: 3 | RNVC: 2
82-00774: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-135-9883
Tappo

151359883
2595: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-4954
Tappo

151664954
LLLS731TYIGRACL1N17: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-115-7112
Disco Metallico Spe

151157112
D0470311: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-176-2829
Control Rod

151762829
LEVA DI COMANDO: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-199-8660
Handwheel

151998660
710-550-559: RNCC: 3 | RNVC: 2
(241)A5122710-550-559: RNCC: 5 | RNVC: 2

21 Jun 2005

5340-15-126-2391
Fascetta

151262391
STD95A: RNCC: 3 | RNVC: 2
STD95A: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-106-0051
Piastra Bloccaggio

151060051
3552191: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-218-4801
Tassello

152184801
2364: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-101-7452
Piastra Non Forata

151017452
250X120X20DIS44125: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-119-4286
Anchor Strap

151194286
132506606: RNCC: 3 | RNVC: 2

26 Jul 1994

5340-15-120-0939
Rubber Bumper

151200939
60174098: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-117-1969
Pad Eye

151171969
190530143: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-203-8390
Bloccaggio Di Sicur

152038390
346B0300A1660.801: RNCC: 3 | RNVC: 2
(241)A2142346B0300A1660.801: RNCC: 5 | RNVC: 2

6 Jul 2011

5340-15-203-4541
Fitting Assembly

152034541
N632U1017101: RNCC: 3 | RNVC: 2

4 Feb 2008

5340-15-155-4855
Upper Ring

151554855
CBD71186P02: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-147-0247
Anello In Bronzo

151470247
88063-1110: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-15-149-8660
Handle

151498660
L280/40P-M6X16: RNCC: 3 | RNVC: 2

16 Jun 1999

5340-15-110-3818
Haltewinkel

151103818
F294B2-81: RNCC: 3 | RNVC: 2
F294B2-81: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-170-7495
Rear Case

151707495
9903905806: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-000-6453
Desiccant Cover Ass

150006453
TA1K1834A: RNCC: 3 | RNVC: 2

27 Mar 2013

5340-15-004-2867
Double Angle Bracket

150042867
1T98165-2: RNCC: 3 | RNVC: 2

24 Feb 1978

5340-15-052-0943
Control Rod

150520943
H521-12-04: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-139-1262
Supporti Per Montag

151391262
27/2955: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-139-3254
Tirante

151393254
1393642: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-147-3125
Stopper

151473125
300456: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-204-9581
Riduzione

152049581
647000000222: RNCC: 3 | RNVC: 2
(241)AK137647000000222: RNCC: 5 | RNVC: 2

2 Feb 2012

5340-15-119-7620
Insul Bush

151197620
294283-P1: RNCC: 3 | RNVC: 2
294283-P1: RNCC: 5 | RNVC: 2
294283-P1: RNCC: 5 | RNVC: 9

17 Nov 1994

5340-15-175-0424
Cap

151750424
15219: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-005-5304
Resilient Mount

150055304
1137-09-159: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-191-6233
V-Band Coupling

151916233
4563-100: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-113-2481
Flangiascaricocompl

151132481
345A4245-001: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-103-1044
Piastrina Con Viti

151031044
DE013.13.506: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-185-5110
Ruota Monolitica In

151855110
J20300130050: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-040-3374
Forcella D Estremit

150403374
5-5237-101-26978: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-107-1829
Rim Clen Clamp (1)

151071829
RS409148: RNCC: 3 | RNVC: 2

30 Apr 1989

Load More Results