What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 55 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 55 of 72

5340-15-067-3368
Gommino Interno

150673368
B110C: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-136-3038
Leva Per Comandi Es

151363038
105.45: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-222-0161
Serratura Da Infila

152220161
01550000: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-164-2220
Escutcheon Plate

151642220
5953550: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-163-1342
Clip

151631342
1300596080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-185-6139
Cilindro Doppio Ova

151856139
901002: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-154-4959
Turnbuckle

151544959
A1001962: RNCC: 3 | RNVC: 2

20 Jun 2001

5340-15-116-1079
Manual Control Lever

151161079
DPR24072/1-42-121A123: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-120-6943
Asta Di Segnalazion

151206943
D0467684: RNCC: 3 | RNVC: 2

8 May 1996

5340-15-145-1931
Directional Lock

151451931
40-1215: RNCC: 3 | RNVC: 2
40-1215: RNCC: 5 | RNVC: 2
PRO-OB-DL: RNCC: 5 | RNVC: 2

2 Jun 1997

5340-15-006-8524
Fascia Di Fissaggio

150068524
N0R2-517-00-135-135: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-170-3850
Cover

151703850
206-9431-23-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-127-4994
Anello Riscaldatore

151274994
864244: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-107-1842
Plastic Bumper

151071842
RS305062A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-156-2030
Lower Base

151562030
(241)A3460CBD71155P02: RNCC: 3 | RNVC: 2
CBD71155P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-141-7250
Pozzetto Filettato

151417250
MN531/75-1/2POLL: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-203-8639
Sportello Accesso

152038639
290/67500: RNCC: 3 | RNVC: 2
(241)A6479290/67500: RNCC: 5 | RNVC: 2

11 Jul 2011

5340-15-122-2778
Bavette Amortisseur

151222778
800053184: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-157-9297
Blocchetto Di Arres

151579297
061594486: RNCC: 3 | RNVC: 2
0-954576: RNCC: 4 | RNVC: 1
(241)A39630-954576: RNCC: 5 | RNVC: 2
1PA39630-954576: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-221-6977
Catena Zincata

152216977
5340RI0992686: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-155-4438
Swivel

151554438
CBD71049P03: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-170-3395
Strap Main Rotor

151703395
206-9301-01-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-126-4488
Molla A Spi.In Acc.

151264488
14560-14: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-157-9175
Staffa Speciale

151579175
00163768: RNCC: 3 | RNVC: 2
0-163768: RNCC: 3 | RNVC: 2
1PA39630-163768: RNCC: 5 | RNVC: 2
(241)A39630-163768: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-115-2344
Lever

151152344
518021530: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-109-8974
Obturator

151098974
D0370149: RNCC: 3 | RNVC: 2
370149: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-065-8826
Handwheel

150658826
000200907850: RNCC: 5 | RNVC: 2
000200907850: RNCC: 5 | RNVC: 9

4 Nov 1985

5340-15-166-4756
Anello Di Arresto

151664756
A30875: RNCC: 1 | RNVC: 2
A30875: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-117-4032
Telaio Per Rele Di

151174032
D1405545: RNCC: 3 | RNVC: 2

31 Mar 1994

5340-15-104-8901
Fissaggio Gaffetta

151048901
4521862: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-178-7453
Shock Mount Pad

151787453
015685BB: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-179-0074
Support

151790074
RU 400 567: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-206-5801
Sostegno Elastico

152065801
MG-DP180: RNCC: 3 | RNVC: 2
(241)A4997MG-DP180: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-007-3313
Anchor Strap

150073313
1127-21-823: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-142-3679
Dispositivo Di Bloc

151423679
AM.25BC.00: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-002-5974
Double Angle Bracket

150025974
5801326275: RNCC: 3 | RNVC: 2

4 Sep 2013

5340-15-222-2277
Ang. Fissaggio 80X8

152222277
S1-110F: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-152-3617
Piastra

151523617
0-153346: RNCC: 3 | RNVC: 2
00153346: RNCC: 3 | RNVC: 2
(241)A39630-153346: RNCC: 5 | RNVC: 2
(241)A396300153346: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-215-0319
Fascetta Per Cablag

152150319
L6652/2-368: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-101-5168
Structual Angle

151015168
109-0372-02-117: RNCC: 3 | RNVC: 2

2 Dec 1986

5340-15-150-0311
Squadretta

151500311
129-0371-73-125: RNCC: 3 | RNVC: 2

15 Jul 1999

5340-15-060-2207
Hinge

150602207
1971TAV69-13ACCIAI0IN0X: RNCC: 3 | RNVC: 2

18 Jan 1977

5340-15-003-5075
Staffa

150035075
4505290: RNCC: 3 | RNVC: 2
4505290: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-199-8476
Anchor Strap

151998476
9CS3703074: RNCC: 3 | RNVC: 2
(241)A91729CS3703074: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-148-2187
Antivibrante

151482187
8203.00.15: RNCC: 3 | RNVC: 2

4 Aug 1998

5340-15-108-4757
Bracket

151084757
C7258-W1-C1: RNCC: 3 | RNVC: 2
C7258-W1-C1: RNCC: 5 | RNVC: 2
C7258-W1-C1: RNCC: 5 | RNVC: 9

19 Jul 1989

5340-15-110-3726
Deckel

151103726
F294F2D-53: RNCC: 3 | RNVC: 2
F294F2D-53: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-105-8491
Maniglia Ribaltabil

151058491
2640-70009: RNCC: 3 | RNVC: 2
2640-70009: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-217-6910
Catena Motosega

152176910
CM30CM60: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-109-1503
Serratura Cassetti

151091503
979002: RNCC: 3 | RNVC: 2

25 Apr 1990

5340-15-166-4977
Insert

151664977
2640786: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-155-0892
Nut And Bo Retainer

151550892
J57150177-003: RNCC: 3 | RNVC: 2

17 Jan 2002

5340-15-041-2793
Distanziale

150412793
2-1021-100-21239-1: RNCC: 3 | RNVC: 2
2-1021-1-00-21239-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-000-2453
Stand Base

150002453
482700000/63: RNCC: 3 | RNVC: 2

12 Feb 2013

5340-15-151-7549
Hinge

151517549
J52850201-001: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-120-8461
Circlip

151208461
RS6: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-181-8271
Pellow Block

151818271
40/045: RNCC: 3 | RNVC: 2
NP-22: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-002-6456
Spring Tension Clip

150026456
109-B700-41-105: RNCC: 3 | RNVC: 2
(241)A0126109-B700-41-105: RNCC: 5 | RNVC: 2

13 Sep 2013

5340-15-180-9159
Half-Hinge

151809159
N925G9181201: RNCC: 3 | RNVC: 2

7 Aug 2008

5340-15-063-6314
Cover Plate Access

150636314
4706083: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-135-7574
Tappo

151357574
SSB172K2215: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-139-8819
Padlock

151398819
100.50: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-163-2367
Rubber Pad

151632367
4877185: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-163-3662
Anchor Strap

151633662
607942: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-109-1815
Rubber Bumper

151091815
1357152: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-002-7265
Molla Valvola Gas

150027265
2372: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-127-2261
Anello Elastico Per

151272261
2200-24874: RNCC: 3 | RNVC: 2
2200-24874: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-000-1359
Plate Cover

150001359
N635G1108202: RNCC: 3 | RNVC: 2

30 Jan 2013

5340-15-154-1018
Corrosion Preventive Anode

151541018
NAV-MM-001-A1-60X500: RNCC: 2 | RNVC: 2

21 Mar 2001

5340-15-100-4753
Handwheel

151004753
23735: RNCC: 3 | RNVC: 2

27 Feb 1986

5340-15-237-3794
Maniglia "Cremonese

152373794
37555: RNCC: 3 | RNVC: 2
534015E088633: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-122-9780
Vite Testa Svasata

151229780
7163849: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-109-1873
Nut And Bolt Locking Plate

151091873
1368316: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-120-3495
Double Angle Bracket

151203495
60175890: RNCC: 3 | RNVC: 2

3 Apr 1995

5340-15-058-8888
Dust And Moisture Seal Protective Plug

150588888
10-101033-11: RNCC: 3 | RNVC: 2

7 Jan 1975

5340-15-119-4930
Threaded End Tensioning Tie Rod

151194930
06.0749.000: RNCC: 3 | RNVC: 2

9 Dec 1994

5340-15-162-0894
Cover Plastic

151620894
KU1001: RNCC: 3 | RNVC: 2

29 Jan 2001

5340-15-074-4088
Turnbuckle

150744088
2B56UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-120-6462
Coperchio Premiguar

151206462
D0386854: RNCC: 3 | RNVC: 2

26 Jun 1996

5340-15-121-6675
Protection Tube

151216675
800064700: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-204-2072
Antirotazione

152042072
163421100: RNCC: 3 | RNVC: 2
(241)A0199163421100: RNCC: 5 | RNVC: 2

26 Sep 2011

5340-15-108-9929
Turnbuckle

151089929
60111931: RNCC: 3 | RNVC: 2

9 May 1988

5340-15-182-7380
Serratura Vari Tipi

151827380
COMM534015C013614: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-180-6426
Cerniera Per Il Mob

151806426
51.052: RNCC: 3 | RNVC: 2
(241)A714651.052: RNCC: 5 | RNVC: 2

27 Jun 2008

5340-15-220-2824
Turnbuckle

152202824
TENDITORE: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-139-4381
Tirante

151394381
4704183: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-153-7040
Tappo Di Protezione

151537040
142006139: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-188-1428
Nut And Bolt Head Protective Cap

151881428
04419356: RNCC: 3 | RNVC: 2

16 Jul 2009

5340-15-103-2011
Piastra Appoggio

151032011
DE160.02.042: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.042: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-222-2300
Telaio Laterale Sx

152222300
S1-13E4: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-064-3963
Mensola Speciale

150643963
60115187: RNCC: 3 | RNVC: 2

6 May 1983

5340-15-002-3681
Paracolpo In Strisc

150023681
369-09070-111: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-15-124-6220
Fermaglio 79.10

151246220
7165503: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-139-4837
Tirante

151394837
60104015: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-222-1097
Lucchetti Mm50

152221097
MM 50: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-4724
Retainer

151154724
000 010 855: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-138-4666
Collare Serraggio

151384666
5948849: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-056-3942
Key Blank

150563942
KP19R: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-207-2387
Handle Control

152072387
(F250/400)115980: RNCC: 3 | RNVC: 2

25 Sep 2012

5340-15-205-2209
Cilindretto Per Por

152052209
9081509001641: RNCC: 3 | RNVC: 2
(241)A99419081509001641: RNCC: 5 | RNVC: 2

28 Feb 2012

5340-15-139-8071
Coperchio

151398071
1001960: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-108-0659
Boss Guide

151080659
01TL23160: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-166-4968
Turnbuckle

151664968
352A1077001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-204-1275
Master Door Key

152041275
S1102: RNCC: 3 | RNVC: 2

8 Sep 2011

5340-15-135-9410
Fascetta Inferiore

151359410
MBEU71174: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-207-4013
Multiple Angle Bracket

152074013
NXWBS: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-196-9914
Padlock

151969914
PN UAS 00033737: RNCC: 3 | RNVC: 2
5340F76029921: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-100-0837
Rod Central Filter

151000837
75498F91: RNCC: 3 | RNVC: 2
75498F91: RNCC: 5 | RNVC: 2

23 Mar 1987

5340-15-008-0424
Cover Plate Access

150080424
1235-31-904: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-122-3371
Tappo Assieme Smorz

151223371
263A1017-001: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-222-2587
Filo Acciaio Diamet

152222587
FFAA0300-3043: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-187-2444
Holder-Spring Plate

151872444
109-0104-13-101: RNCC: 3 | RNVC: 2
(241)A0126109-0104-13-101: RNCC: 5 | RNVC: 2

9 Mar 2009

5340-15-117-7295
Blocchetto Di Fermo

151177295
142508111: RNCC: 3 | RNVC: 2

13 Jan 1994

5340-15-139-7770
Chiavistello

151397770
1000217: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-213-8779
Moschettone Acciaio

152138779
121066: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-195-1807
Joint

151951807
56926033A: RNCC: 3 | RNVC: 2

7 Mar 2011

5340-15-059-8101
Graffa Bloccaggio

150598101
616010051: RNCC: 3 | RNVC: 2

26 Jun 1976

5340-15-220-0512
Lam. Elcom Sys Lg45

152200512
S1-145E: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-102-1058
Gomma Cinghia

151021058
191-1051/01: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-122-3793
Flangia Speciale

151223793
D1404948: RNCC: 3 | RNVC: 2

13 Jun 2000

5340-15-170-9291
Vary Hardware

151709291
71419966: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-188-8668
Dust And Moisture Seal Protective Plug

151888668
3880160S02: RNCC: 3 | RNVC: 2
(241)AB5553880160S02: RNCC: 5 | RNVC: 2

30 Nov 2009

5340-15-193-1451
Access Door Locking Ring

151931451
504121390: RNCC: 3 | RNVC: 2
(241)A4249504121390: RNCC: 5 | RNVC: 2

20 Apr 2010

5340-15-174-7589
Inserto Da Liv.A Pr

151747589
61580-73/004: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-154-0333
Tirante Speciale

151540333
0-103891: RNCC: 3 | RNVC: 2
(241)A39630-103891: RNCC: 5 | RNVC: 2
1PA39630-103891: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-195-1843
Strap Fastener Loop

151951843
999-0500-57-11: RNCC: 2 | RNVC: 2

7 Mar 2011

5340-15-076-2691
Antivibrante

150762691
SIMPAFLEX35-22: RNCC: 3 | RNVC: 2

31 Dec 1978

5340-15-121-3067
Dust And Moisture Seal Protective Cap-Plug

151213067
M9472500110: RNCC: 3 | RNVC: 2

7 Nov 1995

5340-15-134-2541
Supporto

151342541
2410338: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-207-8546
Or164

152078546
440-9-13: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-166-4790
Washer

151664790
91162546: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-109-5302
Dust And Moisture Seal Protective Plug

151095302
GB488-005-000: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-003-8830
Manual Control Handle

150038830
42651: RNCC: 3 | RNVC: 2

2 Dec 2013

5340-15-023-7362

5340-15-027-3686

5340-15-119-6876
C Supporto Cerniera

151196876
13750-001B01: RNCC: 3 | RNVC: 2
13750-001B1: RNCC: 3 | RNVC: 2
13750-001B1: RNCC: 5 | RNVC: 9
13750-001B01: RNCC: 5 | RNVC: 9

2 Nov 1994

5340-15-156-3924
Ring Oil Drift Assy

151563924
(241)A3460CBD71350G01: RNCC: 3 | RNVC: 2
CBD71350G01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-112-8343
Coperchios

151128343
471172: RNCC: 3 | RNVC: 2
D0471172: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-154-5763
Base (1) Per Sosteg

151545763
112737236: RNCC: 2 | RNVC: 3

26 Jul 2001

5340-15-152-3880
Flangia

151523880
4130205139: RNCC: 3 | RNVC: 2
0-117486: RNCC: 5 | RNVC: 2
4130205139: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-123-6672
Supporto In Durall

151236672
2GMVDIS6-92: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-181-1151
Head

151811151
OO201005: RNCC: 3 | RNVC: 2
(241)A4912OO201005: RNCC: 5 | RNVC: 2

29 Oct 2008

5340-15-145-0473
Alternator Box

151450473
D.390.56: RNCC: 3 | RNVC: 2

28 Mar 1997

5340-15-166-4908
Chiusura Di Testa

151664908
SL25860: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-114-7335
Bussola

151147335
D0491399: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-115-7062
Coperchio

151157062
D1401278: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-215-5211
Supporto Per Capsul

152155211
7913G: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-166-4906
Traversino Interno

151664906
SL20260: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-156-3921
Support Flange

151563921
(241)A3460CBD70798P02: RNCC: 3 | RNVC: 2
CBD70798P02: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-152-7312
Shock Mount Pad

151527312
.1014708: RNCC: 3 | RNVC: 2
(241)A3334.1014708: RNCC: 4 | RNVC: 1
2014T708: RNCC: 5 | RNVC: 2

19 Oct 2000

5340-15-195-5346
Clamp Bracket

151955346
4113T20P01: RNCC: 3 | RNVC: 2
(241)A34604113T20P01: RNCC: 5 | RNVC: 2

4 Apr 2011

5340-15-203-4476
Paracolpo Gomma

152034476
N523G5402201: RNCC: 3 | RNVC: 2
(241)A0126N523G5402201: RNCC: 5 | RNVC: 2

3 Feb 2008

5340-15-221-4558
Maniglione

152214558
EX5340RI7420863: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-104-8907
Fissaggio Gaffetta

151048907
742238: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-120-6507
Guida Per Sfera

151206507
D0470346: RNCC: 3 | RNVC: 2

30 Apr 1996

5340-15-121-7513
Staffa Portabombole

151217513
741407: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-063-6181
Helical Compression Spring Retainer

150636181
4720126: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-166-5139
Supporto Per Anelli

151665139
7896G30X30: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-122-2424
Crochet Sangle

151222424
80A034643: RNCC: 3 | RNVC: 2
(241)A325880A034643: RNCC: 5 | RNVC: 2

25 Jun 1996

5340-15-053-8675
Cerniera Battuta Sp

150538675
2R5707-101-22162-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-113-0223
Cuffia Protezione

151130223
8199057: RNCC: 3 | RNVC: 2

23 Feb 1989

5340-15-057-4114
Electrical-Me Post

150574114
779072R: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-006-4632
Escutcheon Plate

150064632
381915: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-211-8757
Blocchetto Cisa Mm

152118757
CISAMM60: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-005-4052
Cover Plate Access

150054052
1137-19-134: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-146-6952
Plug

151466952
907-12AT.TCU/17: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-15-102-2798
Gruppo Staffaggio

151022798
645754: RNCC: 3 | RNVC: 2
645754: RNCC: 5 | RNVC: 9

18 Feb 1988

5340-15-074-4363
Turnbuckle

150744363
1C72UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-135-9876
Scodellino

151359876
105-958: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-062-1744
Bushing Threaded

150621744
26786.0000: RNCC: 5 | RNVC: 2
4-26786.0000//C: RNCC: 5 | RNVC: 2
4-26786C: RNCC: 5 | RNVC: 2
26786.0000: RNCC: 5 | RNVC: 9
4-26786.0000//C: RNCC: 5 | RNVC: 9
4-26786C: RNCC: 5 | RNVC: 9

28 Sep 1981

5340-15-112-8581
Rasamento

151128581
466915: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-001-6060
Nut And Bolt Retainer

150016060
504126996: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-054-9135
Resilient Mount

150549135
533-65-1790: RNCC: 3 | RNVC: 2
R0CAM6417F0RMA80728: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-066-4123
Serratura Complessi

150664123
68-103136-812: RNCC: 3 | RNVC: 2

25 Oct 1985

5340-15-134-2688
Due Vie Blocchetto

151342688
4592280: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-074-4115
Turnbuckle

150744115
1C6UNI20180T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-119-7392
Handwheel

151197392
01TL23244: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-002-8211
Bumper

150028211
5801326480: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-122-9471
Attacco Per Sedile

151229471
412-9000-36-101: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-199-8525
Pulsante Per Manigl

151998525
41986632: RNCC: 3 | RNVC: 2
(241)A917241986632: RNCC: 5 | RNVC: 2

14 Jun 2005

5340-15-136-7251
Attacco Angolare

151367251
212-060-802-113: RNCC: 3 | RNVC: 2

15 Sep 1998

5340-15-060-0161
Base Shock Mount

150600161
C15662-1: RNCC: 3 | RNVC: 2
C15662-1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-120-6938
Piastrino Di Sicure

151206938
D0467908: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-000-0885
Extensible Trestles

150000885
COL TI26035: RNCC: 3 | RNVC: 2

6 Feb 2013

5340-15-062-5930
Seat Helical Compre

150625930
36E07: RNCC: 3 | RNVC: 2
36E07: RNCC: 3 | RNVC: 2

10 Apr 1982

5340-15-007-0857
Fascetta Speciale

150070857
0-15804: RNCC: 3 | RNVC: 2
(241)A39630-15804: RNCC: 5 | RNVC: 2

29 Jun 1979

5340-15-119-3662
Piastra Per Connett

151193662
7-82779-101-79015: RNCC: 3 | RNVC: 2

18 Jul 1994

5340-15-195-9092
Safety Plate

151959092
J04841344-001: RNCC: 3 | RNVC: 2
(241)A0019J04841344-001: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-166-4777
Staffa Fissaggio

151664777
4774792: RNCC: 3 | RNVC: 2
4774792: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-050-3173
Double Angle Bracket

150503173
50040073-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-9005
Sfera

151099005
473092: RNCC: 3 | RNVC: 2
D0473092: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-166-5015
Lh Hinge Ass

151665015
113A6032701: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5197
Invertitore Di Rota

151665197
INVERTIT0RE: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-205-5492
Dust And Moisture Seal Protective Cap-Plug

152055492
182702135: RNCC: 3 | RNVC: 2
(241)A0199182702135: RNCC: 5 | RNVC: 2

19 Mar 2012

5340-15-115-7138
Ghieranonfilettatae

151157138
D1401144: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-116-2297
Shock Mount Pad

151162297
190523115: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-15-174-7477
Piatto 25X8 Peaisi1

151747477
54130-01/120: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-195-9108
Latch Cam

151959108
CAM-01: RNCC: 3 | RNVC: 2
(241)A0019CAM-01: RNCC: 5 | RNVC: 2

25 May 2011

5340-15-193-7730
Key Blank

151937730
JUNIE-JU2: RNCC: 3 | RNVC: 2

13 Jul 2010

5340-15-103-4263
Nut And Bolt Locking Plate

151034263
276983ART32: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-203-4537
Forwa Support Plate

152034537
N632U1010201: RNCC: 3 | RNVC: 2

4 Feb 2008

5340-15-114-3557
Dust And Moisture Seal Protective Cap

151143557
5216-251-12: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-065-7252
Piastra

150657252
109-0700-71-3: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-115-6090
Scatola Coperchio

151156090
D0468465: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-061-5038
Access Cover Plate

150615038
P26GC10: RNCC: 5 | RNVC: 2
P26GC10: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-074-4018
Turnbuckle

150744018
1A36UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-115-7009
Portaboccola

151157009
D1401103: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-193-0294
Piastra Di Montaggi

151930294
504052608: RNCC: 3 | RNVC: 2
(241)A4249504052608: RNCC: 5 | RNVC: 2

6 Apr 2010

5340-15-005-1043
Cover Plate Access

150051043
1127-13-618: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-125-0800
Maniglia

151250800
AZ114: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-103-1960
Speciale Griglia

151031960
DE013.13.398: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.398: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-117-6321
Resilient Mount

151176321
AVAUD910: RNCC: 3 | RNVC: 2

16 May 1994

5340-15-179-6751
Hook

151796751
0000500413956: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-117-4348
Access Door

151174348
585605765161: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-066-1236
Prote Plug

150661236
01TC20407: RNCC: 3 | RNVC: 2

10 Feb 1986

5340-15-155-4977
Support

151554977
CBD70794P03: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-066-1159
Mount Resil

150661159
H160-265-100FM: RNCC: 3 | RNVC: 2

10 Feb 1986

5340-15-156-6571
Threaded End Tensioning Tie Rod

151566571
4239516: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-220-5040
Sbobinatore Stagno

152205040
SD1000: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-127-2307
Molla Per Indurimen

151272307
801578: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-127-5477
Staffetta Fiss.Tras

151275477
882999: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-178-7805
Verrou

151787805
026969: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-074-4421
Turnbuckle

150744421
1B22UNI2021A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-061-2024
Rubber Bumper

150612024
109-0320-40-1: RNCC: 3 | RNVC: 2

17 Dec 1976

5340-15-113-4785
Threaded End Tensioning Tie Rod

151134785
233A2152-001: RNCC: 3 | RNVC: 2

13 Mar 1991

5340-15-206-8545
Stay Rod

152068545
1763024021: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-199-4981
Sadd Pipe Support

151994981
77232F01: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-006-6728
Cap

150066728
127982: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-103-0403
Turnbuckle

151030403
79002642: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-166-5203
Serratura Da Infila

151665203
441456012: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-067-9502
Sportello Laterale

150679502
53.118: RNCC: 3 | RNVC: 2
53.118: RNCC: 3 | RNVC: 2

8 Jul 1986

5340-15-074-4355
Turnbuckle

150744355
1C30UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-057-7866
Key Blank

150577866
NP17Q: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-074-4362
Turnbuckle

150744362
1C64UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-051-3707
Tassello Paracolpi

150513707
984763: RNCC: 3 | RNVC: 2
984763: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-067-4823
Handwheel

150674823
009-310351: RNCC: 2 | RNVC: 2
009-310351: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-15-041-8016
Asta Filettata

150418016
4-3181-201-41815: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-112-0303
Fascia Di Ritegno

151120303
26-6-21-09B: RNCC: 3 | RNVC: 2

19 Feb 1991

5340-15-115-2786
Locking Support

151152786
518052640: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-196-6308
Padlock

151966308
PN UAS 00049316: RNCC: 3 | RNVC: 2
5340F76039963: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-116-8516
Corpo Tappo Metalli

151168516
454935: RNCC: 3 | RNVC: 2
D0454935: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-207-1437
Sostegno Elastico

152071437
157611225: RNCC: 3 | RNVC: 2
(241)A0199157611225: RNCC: 5 | RNVC: 2

10 Sep 2012

5340-15-122-5586
Spanner Man

151225586
01TL21037-03: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-213-8268
Frizione A Molla Pe

152138268
61-0305-ZA-01: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-201-4538
Double Angle Bracket

152014538
212-8900-76-103: RNCC: 3 | RNVC: 2
(241)A0126212-8900-76-103: RNCC: 5 | RNVC: 2

18 Sep 2006

5340-15-005-1953
Metal Runner

150051953
862772: RNCC: 3 | RNVC: 2
862772: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-150-6061
Handwheel

151506061
020N1104V01: RNCC: 3 | RNVC: 2
020N1104V01: RNCC: 5 | RNVC: 9

7 Dec 1999

5340-15-166-4900
Supporto Per Anelli

151664900
7896G15X30: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-074-4387
Turnbuckle

150744387
2C80UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-003-1051
Dust And Moisture Seal Protective Cap-Plug

150031051
182714153: RNCC: 3 | RNVC: 2
(241)A0199182714153: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-089-7691
Dust And Moisture Seal Protective Cap

150897691
A64199: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-231-0728
Piastrina Di Sicure

152310728
00294PMPN: RNCC: 3 | RNVC: 2
534015E151029: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-185-7938
Estrattore Per Viti

151857938
ESTRATTOREGR2: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-215-3476
Catenella Zincata

152153476
CATENELLA14MM.2,2: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-139-7814
Chiavistello

151397814
1000527: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-185-7761
Staffa Montaggio In

151857761
PIH500L: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-120-6935
Supporto Microswitc

151206935
D0468242: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-120-8482
Wheel

151208482
A001: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-170-8878
Lock Key

151708878
23931000002: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-139-8052
Martinetto Base

151398052
1001940: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-120-6448
Coperchio Con Sede

151206448
D0367702: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-177-3105
Fixed Wheel

151773105
21458: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-115-7107
Maschera Per Dicitu

151157107
D1401030: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-136-5460
Forcella Estremita'

151365460
212-076-138-3: RNCC: 3 | RNVC: 2

24 Sep 1998

5340-15-231-7741
Staffa Con Foro Fil

152317741
156006: RNCC: 3 | RNVC: 2
534015E088573: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-115-6939
Control Rod

151156939
D1401167: RNCC: 3 | RNVC: 2

8 Mar 1994

5340-15-157-2431
Portacalzatoia Sini

151572431
DE013.14.073: RNCC: 3 | RNVC: 2
(241)A5015DE013.14.073: RNCC: 5 | RNVC: 2

9 Jun 2003

5340-15-175-0419
Fixing System

151750419
14201001: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-221-4562
Padlock

152214562
EX5340RN0400338: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-074-4170
Turnbuckle

150744170
1A27UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-163-1193
Clip

151631193
9553358199: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-183-2824
Manicottatura

151832824
MAN05: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-119-8452
Fork

151198452
M910-20-22-02A: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-218-8776
Cappuccio In Poliet

152188776
3146-5: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-137-3623
Inserto

151373623
VU3030-1: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-108-2508
Handwheel

151082508
0455/4/13/58: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-136-0542
Tassello Gomma

151360542
4257614: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-118-6588
Anneau

151186588
73122418: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-230-5091
Fermo

152305091
816.711: RNCC: 3 | RNVC: 2
534015E132816: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-218-4798
Tassello Sb9

152184798
348: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-120-6957
Protezione Sfogo Ar

151206957
D0466767: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-139-7820
Chiavistello

151397820
1000606: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-116-4953
Resilient Mount

151164953
60165164: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-135-9566
Staffa

151359566
763703: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-4778
Cappellotto Di Pr

151664778
MBEU3210RU: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-103-1928
Anello Con Portagom

151031928
DE013.13.131: RNCC: 3 | RNVC: 2
DE013.13.131: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-057-4113
Electrical-Me Post

150574113
779198M: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-157-6676
Resilient Mount

151576676
11031905: RNCC: 3 | RNVC: 2
(241)A977211031905: RNCC: 5 | RNVC: 2

15 Oct 2003

5340-15-109-6801
Helical Compression Spring Retainer

151096801
71182: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-105-8185
Sostegno Elastico

151058185
10284: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-185-6138
Serratura

151856138
72210: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-163-2905
Gummideckel

151632905
9000.134: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-115-8575
Rear Bracke

151158575
295056P1: RNCC: 3 | RNVC: 2
71-02-031-025: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-192-1595
Morsetto

151921595
56-1-24-05A: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-111-3054
Handle

151113054
P-893089-001: RNCC: 3 | RNVC: 2
P893089-001: RNCC: 5 | RNVC: 2

29 Jan 1991

5340-15-109-3727
Dust And Moisture Seal Protective Cap

151093727
5137-294-35: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-105-6353
Collare Serraggio

151056353
12179890: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-001-8327
Molla

150018327
2106941: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-102-9064
Accesso Coperchio

151029064
1P265648: RNCC: 3 | RNVC: 2
1P265648: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-074-4012
Turnbuckle

150744012
1A16UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-178-7661
Lock Key

151787661
054347: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-141-4575
Tappo

151414575
VSR1/2: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-162-2088
Lock Key

151622088
33.429/1: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-006-2559
Guida Speciale

150062559
0-28888: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-153-7442
Rubber Bumper

151537442
142063246: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-062-8971
Staffetta Speciale

150628971
0-56006: RNCC: 3 | RNVC: 2

11 Mar 1982

5340-15-193-8150
Bracket

151938150
SPE-J-943-A-9001/126: RNCC: 3 | RNVC: 2
(241)A0019SPE-J-943-A-9001/126: RNCC: 5 | RNVC: 2

19 Jul 2010

5340-15-107-9890
Shank

151079890
141-1312/12: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-192-7579
Circlip

151927579
328: RNCC: 3 | RNVC: 2

26 Mar 2010

5340-15-147-3463
Dust And Moisture Seal Protective Cap

151473463
RF70CM2215D: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-222-0623
Cilindro In Ottone

152220623
0G300.10: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-116-3240
Assieme Squadretta

151163240
009A4583-401: RNCC: 3 | RNVC: 2

22 Apr 1993

5340-15-105-8510
Double Angle Bracket

151058510
503-03-4962: RNCC: 5 | RNVC: 2
503-03-4962: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-181-4223
Passacavi

151814223
357326-1: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-005-6467
Piastrina Sagomata

150056467
0-21127: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-201-1483
Nut And Bolt Retainer

152011483
UA22009A12P: RNCC: 3 | RNVC: 2
(241)A2142UA22009A129: RNCC: 5 | RNVC: 2

11 Jun 2006

5340-15-207-5978
Dust And Moisture Seal Protective Cap-Plug

152075978
178950980: RNCC: 3 | RNVC: 2
(241)A0199178950980: RNCC: 5 | RNVC: 2

5 Nov 2012

5340-15-007-8084
Helical Compression Spring Seat

150078084
748850: RNCC: 3 | RNVC: 2

27 Mar 1979

5340-15-101-6932
Hnadle

151016932
303584: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-188-4315
Headless Straight Rod

151884315
79071106: RNCC: 3 | RNVC: 2

11 Sep 2009

5340-15-053-1100
Extension Drawer Slide

150531100
92N052P002: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-203-9069
Dust And Moisture Seal Protective Plug

152039069
6840364-10: RNCC: 3 | RNVC: 2
(241)A01896840364-10: RNCC: 5 | RNVC: 2

22 Jul 2011

5340-15-179-6082
Key Blank

151796082
EU1R: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-15-001-6799
Molla

150016799
174060021: RNCC: 3 | RNVC: 2
174060021: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-001-6007
Bumper

150016007
42566667: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-112-8291
Supportol

151128291
467232: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-4308
Turnbuckle

150744308
1B20UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4116
Turnbuckle

150744116
1C8UNI20180T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-063-8109
Nut And Bolt Locking Plate

150638109
4643591: RNCC: 3 | RNVC: 2

31 Mar 1982

5340-15-116-1143
Piastrina Di Blocca

151161143
DPR24130/2-155: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-174-7558
Material Fori Metal

151747558
58634-88/009: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-138-6757
Inserto Filettato

151386757
5641-262-102: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-117-1898
Resilient Mount Plate

151171898
UL000376R0004: RNCC: 3 | RNVC: 2

23 Mar 1994

5340-15-157-6865
Handwheel

151576865
TM9011511100: RNCC: 3 | RNVC: 2
(241)TM9011511100: RNCC: 5 | RNVC: 9
TM9011511100: RNCC: 5 | RNVC: 9

15 Oct 2003

5340-15-068-0760
Piastrina

150680760
101-13-17: RNCC: 3 | RNVC: 2

19 Jun 1986

5340-15-178-5409
Manual Control Handle

151785409
2185.030.0004: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-206-8805
Dust And Moisture Seal Protective Plug

152068805
21770074A: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-215-0496
Pinza A Coccodrillo

152150496
PINZA A COCCODRILLO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-001-1783
Friction Catch Stud Receptacle

150011783
504376330: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-15-137-4855
Chiudiporta Con Fer

151374855
609V: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-114-7563
Supp Flange

151147563
01TL20824: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-113-5720
Speciale Co Attacco

151135720
92996-001: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-041-8026
Cardano

150418026
4-3351-401-41863-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-103-6197
Helical Compression Spring Seat

151036197
20390016A: RNCC: 3 | RNVC: 2
3039T0016A: RNCC: 3 | RNVC: 2
(241)A361820390016A: RNCC: 4 | RNVC: 1

26 Nov 1987

5340-15-065-1162
Semiblocchetto

150651162
A1-53066-003: RNCC: 3 | RNVC: 2
A1-53066-003: RNCC: 5 | RNVC: 9

19 Sep 1984

5340-15-151-7561
Fitting

151517561
J52850751-003: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-153-4031
Elettro-Me Raccordo

151534031
5143-242-08: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-103-2489
Cap Protection

151032489
HP01.149: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-113-9934
Ralla

151139934
D0473738: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-074-4157
Turnbuckle

150744157
2D22UNI2018AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-214-8250
Ganci Per Pannelli

152148250
GANCIXPANNELLIPORTAATTREZZI: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-180-3666
Gaffetta Fissaggio

151803666
5428031-4: RNCC: 3 | RNVC: 2
5428031-4: RNCC: 5 | RNVC: 2

29 Apr 2008

5340-15-136-9197
Guiva

151369197
5F1-1-64: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-151-2741
Stand Base (1)

151512741
3207174: RNCC: 3 | RNVC: 2
553207174000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-119-9787
Threaded End Tensioning Tie Rod

151199787
78420F01: RNCC: 3 | RNVC: 2
78420F01: RNCC: 5 | RNVC: 9

28 May 1996

5340-15-203-9841
Angle Bracket

152039841
346B0300A2070.801: RNCC: 3 | RNVC: 2
(241)A2142346B0300A2070.801: RNCC: 5 | RNVC: 2

1 Aug 2011

5340-15-119-7398
Shaft Threa

151197398
01TL23251: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-104-4333
Testa Tira Forcella

151044333
22226: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-179-8066
Beltguard

151798066
6-05-036: RNCC: 3 | RNVC: 2

3 Aug 2007

5340-15-074-4356
Turnbuckle

150744356
1C33UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-196-9915
Padlock

151969915
PN UAS 00005404: RNCC: 3 | RNVC: 2
5440F76018041: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-179-6706
Copertura Rigida Pe

151796706
504100653: RNCC: 3 | RNVC: 2
(241)A4249504100653: RNCC: 5 | RNVC: 2

7 Jun 2007

5340-15-206-5589
Corrosion Preventive Anode

152065589
FACO513-V-601: RNCC: 3 | RNVC: 2
(241)A3121FACO513-V-601: RNCC: 5 | RNVC: 2

25 Jun 2012

5340-15-218-8777
Cappuccio In Poliet

152188777
3146-4: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-128-5363
Handwheel

151285363
5476: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-061-2105
Rim Clen Clamp (1)

150612105
L304BA: RNCC: 5 | RNVC: 2
T0064107: RNCC: 5 | RNVC: 2
1200096-122140080: RNCC: 5 | RNVC: 2
L304BA: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-074-4114
Turnbuckle

150744114
1C80UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-107-6400
Supporto Strip Sini

151076400
305879A1: RNCC: 3 | RNVC: 2

27 Oct 1988

5340-15-115-2347
Bushing

151152347
518021580: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-105-6310
Collare Serraggio

151056310
10450490: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-6092
Coullisse

151186092
73132130: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-105-6312
Collare Serraggio

151056312
9911968: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-107-8810
Control Rod

151078810
42309429: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-219-3011
Espositore Per Chia

152193011
2010976: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-232-9583
Tassello Con Occhie

152329583
0632: RNCC: 3 | RNVC: 2
534015E096674: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-112-8431
Coperchietto

151128431
D0469693: RNCC: 3 | RNVC: 2
469693: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-193-6917
Support Plate

151936917
109-0714-98-101: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-15-149-6303
Support

151496303
518-30-2140: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-175-1456
Spring Retain Plate

151751456
10C-023REF119: RNCC: 3 | RNVC: 2

21 Jan 2004

5340-15-159-6002
Snap Hook

151596002
PN UAS 00026619: RNCC: 3 | RNVC: 2
9999F76018944: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-139-7209
Chiavistello

151397209
A.2821900: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-120-6893
Disco Laterale Moto

151206893
D0471274: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-142-8566
Maniglia

151428566
10PV00006-583: RNCC: 3 | RNVC: 2
10PV00006-583: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-179-1640
Flange Assembly

151791640
RS 403 499 -X: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-064-7163
Bracket Double Angl

150647163
01-245-E-281: RNCC: 3 | RNVC: 2

24 Jun 1984

5340-15-211-8780
Kit 2 Mt Nastro Vel

152118780
412519: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-110-5767
Coperchio Accesso

151105767
1R 525914: RNCC: 3 | RNVC: 2
1R 525914: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-106-2033
Comando Impugnatura

151062033
1350169: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-003-7491
Collare

150037491
32324-6724: RNCC: 3 | RNVC: 2
(241)A014732324-6724: RNCC: 5 | RNVC: 2

20 Nov 2013

5340-15-194-7864
Pomello Bloccaggio

151947864
50746: RNCC: 3 | RNVC: 2
(241)A348850746: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-166-4875
Piedino

151664875
000930: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-135-9854
Silent

151359854
736-801: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-074-4020
Turnbuckle

150744020
1A45UNI2018ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-193-6594
Fermo

151936594
163120187: RNCC: 3 | RNVC: 2
(241)A0199163120187: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-185-4790
Morsetto Parallelo

151854790
23851: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-181-4428
Piastra Monitor

151814428
PRT413: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-231-7919
Cricchetto Completo

152317919
UT/SA/0009/26: RNCC: 3 | RNVC: 2
534015E122767: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-109-5961
Helical Compression Spring Seat

151095961
772898: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-005-6428
Anello Speciale

150056428
0-15869: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-169-7221
Lucchetto S&G

151697221
F72018178: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-107-4221
Resilient Mount

151074221
V1643-2: RNCC: 3 | RNVC: 2

4 Feb 1988

5340-15-207-8233
Dust And Moisture Seal Protective Cap-Plug

152078233
5801318184: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-108-4914
Corrosion Preventive Anode

151084914
35.420/54.112-54.113: RNCC: 3 | RNVC: 2

6 Oct 1994

5340-15-188-1512
Panel

151881512
20195065D: RNCC: 3 | RNVC: 2

21 Jul 2009

5340-15-187-0427
Asta Superiore Crem

151870427
504100895: RNCC: 3 | RNVC: 2
(241)A4249504100895: RNCC: 5 | RNVC: 2

3 Feb 2009

5340-15-065-2031
Turnbuckle Assembly

150652031
192-0882/11: RNCC: 3 | RNVC: 2

7 Sep 1984

5340-15-126-4487
Molla

151264487
14560-13: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-003-5547
Staffa

150035547
4557648: RNCC: 3 | RNVC: 2
4557648: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-120-6789
Blocchetto Intercet

151206789
D0491787: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-118-6457
Extracteur

151186457
75204166: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-174-7553
F.Spesso Standard

151747553
58634-70/001: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-105-5497
Dado E Bullon Fermo

151055497
9901358: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-138-4894
Tassello

151384894
5985122: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-127-3902
Molla Per Avvisator

151273902
838943: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-001-8715
Gancio Di Fissaggio

150018715
504339/04: RNCC: 3 | RNVC: 2

18 Jul 2013

5340-15-166-4781
Barretta 10X10x200

151664781
778526: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-056-6051
Anello Sussidiario

150566051
15992: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-125-5532
Terminale A Tubo

151255532
1605000: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-112-8474
Supportol

151128474
472195: RNCC: 3 | RNVC: 2
D0472195: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-139-1992
Leva

151391992
4984652: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-127-5942
Molla Cambio Veloci

151275942
983027: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-217-6105
Padlock

152176105
EXRI7902307: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-166-5169
Supporto Lato Colle

151665169
73763801: RNCC: 3 | RNVC: 2
73763801: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-156-2076
Hinge Pin

151562076
(241)A3460CBD71163P03: RNCC: 3 | RNVC: 2
CBD71163P03: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-209-7273
Oliatore Gr.300 Cos

152097273
6255: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-121-6473
Guide

151216473
800047845: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-212-5644
Kit Chiusura Molle

152125644
MFG-A5387: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4405
Turnbuckle

150744405
2A10UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-118-6817
Ring Set

151186817
1CMLM0017: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-214-6892
Snap Hook

152146892
MOSCHETTONE: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-203-0143
Sealing Plug Assembly

152030143
BW 010.10: RNCC: 3 | RNVC: 2
(241)AF180BW010.10: RNCC: 5 | RNVC: 2

11 Nov 2007

5340-15-148-9146
Anello Raschiaolio

151489146
PNE301018-003: RNCC: 3 | RNVC: 2

29 Oct 1998

5340-15-056-5939
Leaf Spring Alignment Clip

150565939
13605: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-153-5247
Coperchio E Guarniz

151535247
142079928: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-062-8561
Fascetta Speciale

150628561
0-08421: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-166-5145
Fascetta Serracavo

151665145
233430: RNCC: 3 | RNVC: 2
800-01-17-103-23: RNCC: 5 | RNVC: 2

1 Nov 2002

5340-15-045-1491
Control Rod

150451491
500-13-05: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-148-3078
Dust And Moisture Seal Protective Cap-Plug

151483078
7240003: RNCC: 3 | RNVC: 2

26 Oct 1998

5340-15-215-5514
Drive Air Ratchet

152155514
A200D: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-116-9537
Filter

151169537
FIL33TAB5: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-154-7917
Extension Drawer Slide

151547917
205.109.001: RNCC: 3 | RNVC: 2

26 Sep 2001

5340-15-001-0308
Manual Control Lever

150010308
504376049: RNCC: 3 | RNVC: 2

15 May 2013

5340-15-122-1526
Threaded End Tensioning Tie Rod

151221526
D0491643: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-148-0269
Rubber Bumper

151480269
HIIA1688-B-365: RNCC: 3 | RNVC: 2

10 Jun 1998

5340-15-153-0984
Assieme Cerniera

151530984
9CA1741A420-402: RNCC: 3 | RNVC: 2

21 Nov 2000

5340-15-074-4426
Turnbuckle

150744426
1B10UNI20210T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-106-3028
Tappo Tenuta Comple

151063028
8029/A: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-160-0304
Lucchetto C.

151600304
F720106531: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-117-1502
Fascetta Speciale

151171502
06200A108770: RNCC: 5 | RNVC: 2
06200A108770: RNCC: 5 | RNVC: 9

10 Aug 1993

5340-15-112-0416
Dispositivo Di Supp

151120416
275A2654-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-139-7153
Piastrina Di Fermo

151397153
A.0702900: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-007-9985
Helical Compression Spring Seat

150079985
756200: RNCC: 3 | RNVC: 2
756200: RNCC: 5 | RNVC: 2
0-48713: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-163-1204
Clip

151631204
7686231: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-122-2486
Sabot Moteur

151222486
80A068503: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-005-4947
Fascetta

150054947
751SS36-8SK: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-122-2587
Anchor Strap

151222587
800031696: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-004-4537
Resilient Mount

150044537
82306: RNCC: 3 | RNVC: 2

30 May 1978

5340-15-116-2768
Speciale Guida

151162768
190518206: RNCC: 3 | RNVC: 2

15 Apr 1993

5340-15-207-2002
Kit Prigionieri

152072002
E75503428: RNCC: 2 | RNVC: 2
(241)AG350E75503428: RNCC: 5 | RNVC: 2

20 Sep 2012

5340-15-174-7489
Tondo 40 Pealsimgmn

151747489
54230-02/088: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-137-7921
Staffa Fissaggio

151377921
1113-03-138: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-119-5426
Piastrina Anteriore

151195426
D0481792: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-115-7086
Cerniera Complessiv

151157086
D0469608: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-215-4921
Supporto Per Dischi

152154921
7885G: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-063-6290
Luggage Bumper

150636290
4751875: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-116-1905
Preassieme Aggancio

151161905
190509042: RNCC: 3 | RNVC: 2

24 Mar 1993

5340-15-152-3811
Staffa

151523811
0-101775: RNCC: 3 | RNVC: 2

6 Sep 2000

5340-15-156-1163
Dust And Moisture Seal Protective Cap

151561163
155808-1: RNCC: 3 | RNVC: 2

22 Nov 2002

5340-15-179-6076
Metallic Bumper

151796076
11.028.A: RNCC: 3 | RNVC: 2

11 Apr 2007

5340-15-117-1941
Blocchetto Di Fermo

151171941
190518109: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-001-1821
Double Angle Bracket

150011821
504375797: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-15-178-3294
Quick Release Plunger

151783294
1P340798: RNCC: 3 | RNVC: 2

29 Apr 2005

5340-15-200-6446
Dust And Moisture Seal Protective Cap-Plug

152006446
RE60174: RNCC: 3 | RNVC: 2
(241)ACA64RE60174: RNCC: 5 | RNVC: 2

15 Feb 2006

5340-15-153-3100
Headless Straight Rod

151533100
122611263: RNCC: 3 | RNVC: 2

13 Dec 2000

5340-15-121-5729
Helical Compression Spring Seat

151215729
1P 531707: RNCC: 3 | RNVC: 2
1P 531707: RNCC: 5 | RNVC: 9

18 Sep 1996

5340-15-157-2101
Control Rod

151572101
60155068: RNCC: 3 | RNVC: 2

21 May 2003

5340-15-179-6728
Spacing Threaded Standoff

151796728
0000500413875: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-020-2186
Piastrina Arresto

150202186
01-231M64: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-163-1623
Clip

151631623
1311695080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-149-4921
Pattino Di Metallo

151494921
0552000-46: RNCC: 3 | RNVC: 2

20 Apr 1999

5340-15-134-5491
Staffetta

151345491
4037490: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-100-1611
Threaded End Tensioning Tie Rod

151001611
42015694: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-193-3955
Spring Tension Clip

151933955
504317578: RNCC: 3 | RNVC: 2
(241)A4249504317578: RNCC: 5 | RNVC: 2

11 May 2010

5340-15-193-9495
Dust And Moisture Seal Protective Cap

151939495
RAC5151: RNCC: 3 | RNVC: 2

2 Aug 2010

5340-15-001-8463
Cap

150018463
ED0021450600-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-052-7011
Bloccaggio

150527011
204-7705-97-1: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-006-2687
Cerniera Speciale

150062687
0-34033: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-194-4686
Tappo Antipressione

151944686
18.538.00: RNCC: 3 | RNVC: 2
(241)A492818.538.00: RNCC: 5 | RNVC: 2

18 Nov 2010

5340-15-201-8205
Headless Straight Rod

152018205
51784: RNCC: 3 | RNVC: 2
(241)A348851784: RNCC: 5 | RNVC: 2

17 Dec 2006

5340-15-156-3679
Base

151563679
(241)A3460CBD71404P01: RNCC: 3 | RNVC: 2
CBD71404P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-001-7993
Dust And Moisture Seal Protective Cap

150017993
500383041: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-202-4553
Giunto

152024553
06611: RNCC: 3 | RNVC: 2
(241)A553606611: RNCC: 5 | RNVC: 2

26 Mar 2007

5340-15-179-3420
Fastening Bracket

151793420
99435006: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-166-5085
Cap

151665085
RAA16: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-068-9185
Resilient Mount

150689185
70684837: RNCC: 3 | RNVC: 2

9 Oct 1984

5340-15-105-8276
Escutcheon Plate

151058276
24030: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-2757
Upper Guide

151152757
518052060: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-103-0994
Electrical-Me Post

151030994
DE160.02.116: RNCC: 3 | RNVC: 2
(241)A5015DE160.02.116: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-063-8619
Rullino Torretta

150638619
01290: RNCC: 3 | RNVC: 2
01290: RNCC: 5 | RNVC: 2

11 Mar 1983

5340-15-107-2877
Electrical-Me Post

151072877
64147: RNCC: 3 | RNVC: 2
64147F01: RNCC: 5 | RNVC: 2

2 Nov 1993

Load More Results