What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 54 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 54 of 72

5340-15-101-2917
Strettoio Chiusura

151012917
677623-3/1: RNCC: 3 | RNVC: 2

28 Jul 1986

5340-15-215-5631
Puntimetallicisicut

152155631
0493G-10: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-117-1970
Rubber Bumper

151171970
190509264: RNCC: 3 | RNVC: 2

2 Sep 1993

5340-15-117-9608
Corrosion Preventive Anode

151179608
65453F01: RNCC: 3 | RNVC: 2
65453F01: RNCC: 3 | RNVC: 2
65453F01: RNCC: 5 | RNVC: 9

20 Oct 1994

5340-15-200-9861
Corrosion Preventive Anode

152009861
116344P4: RNCC: 3 | RNVC: 2
(241)A5205116344P4: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-15-153-6986
Handwheel

151536986
121107282: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-163-3578
Anchor Strap

151633578
4002890: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-074-4292
Turnbuckle

150744292
2A39UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-166-5129
Serratura Infilare

151665129
SRTINFMM35240: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-211-5386
Fascetta

152115386
01166417: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-068-2384
Helical Compression Spring Retainer

150682384
474185: RNCC: 3 | RNVC: 2

2 Apr 1986

5340-15-137-3158
Spessore Laminato

151373158
S6121-60037-23: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-170-8047
Piastra Di Supp.Ibr

151708047
340-0365/01.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-045-4009
Distanziale

150454009
781-12-60-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-005-0227
Dust And Moisture Seal Protective Cap

150050227
580052: RNCC: 3 | RNVC: 2
796.063.812: RNCC: 5 | RNVC: 2
796-063-812: RNCC: 5 | RNVC: 2

1 Mar 1985

5340-15-156-3844
Plugging Plate

151563844
(241)A3460CBD71342P07: RNCC: 3 | RNVC: 2
CBD71342P07: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-218-4800
Tassello

152184800
2363: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-199-8057
Tappo In P0liuretan

151998057
D0551959: RNCC: 3 | RNVC: 2
(241)A0461D0551959: RNCC: 5 | RNVC: 2

7 Jun 2005

5340-15-136-2379
Tappo

151362379
5899122: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-200-1754
Piastra Stabilizzaz

152001754
FUS.14350.UEO1: RNCC: 3 | RNVC: 2
(241)A5924FUS.14350.UEO1: RNCC: 5 | RNVC: 2

18 Oct 2005

5340-15-205-5104
Special Protezione

152055104
178940162: RNCC: 3 | RNVC: 2
(241)A0199178940162: RNCC: 5 | RNVC: 2

15 Mar 2012

5340-15-186-9788
Corrosion Preventive Anode

151869788
PAAE079483: RNCC: 3 | RNVC: 2
(241)A9840PAAE079483: RNCC: 5 | RNVC: 2

15 Jan 2009

5340-15-142-1354
Anodo

151421354
C.AND.1": RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-237-7416
Cerniera Per Infiss

152377416
501.330.03: RNCC: 3 | RNVC: 2
534015E082738: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-107-4469
Helical Compression Spring Seat

151074469
1P 245214: RNCC: 3 | RNVC: 2
1P 245214: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-120-6707
Control Rod

151206707
D0467774: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-120-6706
Control Rod

151206706
D0467694: RNCC: 3 | RNVC: 2

8 May 1996

5340-15-115-7179
Coperchio

151157179
MC403.25E: RNCC: 3 | RNVC: 2

10 Dec 1993

5340-15-169-3557
Serratura

151693557
F72010958: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-231-9448
Tirante

152319448
8967439: RNCC: 3 | RNVC: 2
534015E144811: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-192-3856
Piastra Di Montaggi

151923856
052390: RNCC: 3 | RNVC: 2
(241)A3593052390: RNCC: 5 | RNVC: 2

15 Mar 2010

5340-15-207-0218
Stand Base

152070218
N651U3096102: RNCC: 3 | RNVC: 2

8 Aug 2012

5340-15-138-3518
Fermaglio

151383518
4159095: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-136-9408
Striscia

151369408
47-266-043-11: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-127-1724
Supporto

151271724
1740-65-011: RNCC: 3 | RNVC: 2
1740-65-011: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-114-7754
Rocker Box Cap

151147754
560-2125-100: RNCC: 3 | RNVC: 2
560.2125.100: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-166-5105
Shaft

151665105
BT01A911A06001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-190-6143
Giunto

151906143
4407-580SS: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-193-2504
Vehicular Hatch Hinge

151932504
504227025: RNCC: 3 | RNVC: 2
(241)A4249504227025: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-15-150-5266
Access Cover

151505266
157638176: RNCC: 3 | RNVC: 2

12 Jan 2000

5340-15-158-6530
Protezione

151586530
162520160: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-15-218-7183
5 In Fascetta 100X2

152187183
190-3871: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-181-7878
8Cm Con Tassello 0

151817878
DIAM0,8CM: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-115-7023
Puntalino

151157023
D1401498: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-150-3628
Cinghia Completa Bl

151503628
A2885800: RNCC: 3 | RNVC: 2

30 Sep 1999

5340-15-110-3558
Sparepart

151103558
BOST1049: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-053-1094
Guide Printed Board

150531094
42V044P001: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-181-4877
Staffa Ups-Batt.

151814877
PRT416: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-202-2803
Fascetta Fissaggio

152022803
41222258: RNCC: 3 | RNVC: 2
(241)A424941222258: RNCC: 5 | RNVC: 2

19 Feb 2007

5340-15-152-2169
Chiusura

151522169
60184086: RNCC: 3 | RNVC: 2

10 Aug 2000

5340-15-110-7947
Seat Pipe Support

151107947
62289-001A00: RNCC: 3 | RNVC: 2
62289-001: RNCC: 5 | RNVC: 2

29 Jul 1990

5340-15-078-0835
Morsetto

150780835
TM01-63-80: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-009-2571
Semicerniera

150092571
P882734-000: RNCC: 3 | RNVC: 2

20 Aug 1980

5340-15-065-3368
Hinge

150653368
P-894875-023: RNCC: 3 | RNVC: 2
P894875-023: RNCC: 5 | RNVC: 2

19 Feb 1985

5340-15-114-8800
Corredoinstallazion

151148800
188-2013/02: RNCC: 3 | RNVC: 2

1 Sep 1992

5340-15-200-4258
Set Di Chiodi

152004258
OMP-TEN-019: RNCC: 3 | RNVC: 2
(241)AE591OMP-TEN-019: RNCC: 5 | RNVC: 2

18 Jan 2006

5340-15-065-7293
Sadd Pipe Support

150657293
109-0616-65-1: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-005-6609
Cover Plate Access

150056609
4311135: RNCC: 3 | RNVC: 2
4311135: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-105-6308
Collare Serraggio

151056308
10418301: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-160-9442
Lucchetto S&G

151609442
F720177331: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-120-6495
Flangia A Scafo Per

151206495
D0287045: RNCC: 3 | RNVC: 2

28 Jun 1996

5340-15-105-5977
Staffa A Gomito

151055977
22126: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-178-9930
Hinge

151789930
RS 404 758 A: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-127-5470
Molla Rich.Leva Com

151275470
882736: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-150-2575
Supporto Speciale

151502575
26-6-21-24D: RNCC: 3 | RNVC: 2

8 Sep 1999

5340-15-197-7297
Dust And Moisture Seal Protective Cap

151977297
DDED7273-02: RNCC: 3 | RNVC: 2
DDED7273-02: RNCC: 5 | RNVC: 2

22 Apr 2004

5340-15-150-5364
Mask

151505364
340-8549/01: RNCC: 3 | RNVC: 2

30 Nov 1999

5340-15-001-2946
Spring Tension Clip

150012946
3001-2949 031: RNCC: 3 | RNVC: 2

17 Jun 2013

5340-15-154-1016
Corrosion Preventive Anode

151541016
NAV-MM-001-A1-20X400: RNCC: 2 | RNVC: 2

21 Mar 2001

5340-15-149-2802
Portatenute

151492802
C66704: RNCC: 3 | RNVC: 2

25 Mar 1999

5340-15-148-6687
Access Cover

151486687
1M06172001: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-231-1604
Tassello

152311604
7649511: RNCC: 3 | RNVC: 2
534015E092420: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-162-6559
Plate

151626559
SF260-13-303-15: RNCC: 5 | RNVC: 2
SF260-13-303-15: RNCC: 5 | RNVC: 9

7 Dec 2001

5340-15-116-3306
Speciale Adattatore

151163306
211A7163-001: RNCC: 3 | RNVC: 2

22 Apr 1993

5340-15-186-2197
Cerniere Ferro Pesa

151862197
FP-50: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-154-6468
Base (1) Per Sosteg

151546468
554103360000: RNCC: 2 | RNVC: 3
541-03-3600: RNCC: 2 | RNVC: 3

31 Jul 2001

5340-15-065-6004
Piastrina Supporto

150656004
109-0510-29-3: RNCC: 3 | RNVC: 2

16 Dec 1984

5340-15-119-2409
Dust And Moisture Seal Protective Cap

151192409
DE080-100-4211-1: RNCC: 3 | RNVC: 2

14 Mar 1996

5340-15-001-7234
Helical Compression Spring Seat

150017234
08-10-968-17P-C: RNCC: 3 | RNVC: 2

15 Jul 2013

5340-15-101-4851
Anode Retaining Plug

151014851
C84328-2-31: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-180-4503
Piastra Di Montaggi

151804503
504195172: RNCC: 3 | RNVC: 2
(241)A4249504195172: RNCC: 5 | RNVC: 2

27 May 2008

5340-15-100-7985
Tappo Forato A Pinz

151007985
000900289800: RNCC: 5 | RNVC: 2
000900289800: RNCC: 5 | RNVC: 9

20 Nov 1986

5340-15-231-5694
Ancoraggio

152315694
534015E093114: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-198-5815
Assieme Coperchio

151985815
A131684-1: RNCC: 3 | RNVC: 2
(241)A0076A131684-1: RNCC: 5 | RNVC: 2

15 Oct 2004

5340-15-134-4033
Staffa

151344033
38824256: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-117-9193
Tappo Assieme

151179193
245A2045-403: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-110-4398
Hinge

151104398
42325870: RNCC: 3 | RNVC: 2
42325870: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-166-4843
Tappo

151664843
80011PSF20: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-110-7978
Protezionetraversad

151107978
02893-002A01: RNCC: 3 | RNVC: 2
02893-002A1: RNCC: 5 | RNVC: 2

29 Jul 1990

5340-15-154-1435
Tirante Assieme

151541435
0-115079: RNCC: 3 | RNVC: 2
(241)A39630-115079: RNCC: 5 | RNVC: 2
1PA39630-115079: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-214-3147
Fascetta Cablaggio

152143147
MIL-LK4: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-220-8590
Molla Nylon 15Mt

152208590
4219/15: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-109-2429
Clamp Bonding

151092429
145A2023-001: RNCC: 3 | RNVC: 2

30 Dec 1989

5340-15-170-8589
6 Fr4 2Cu Lastra 1

151708589
58572-02/505: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-156-2041
Bracket

151562041
(241)A3460CBD71211P02: RNCC: 3 | RNVC: 2
CBD71211P02: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-006-0139
Anchor Strap

150060139
B512TL158: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-148-4896
Asta Cilindrica

151484896
4840338: RNCC: 3 | RNVC: 2

13 Aug 1999

5340-15-001-1793
Double Angle Bracket

150011793
504376773: RNCC: 3 | RNVC: 2

3 Jun 2013

5340-15-001-5838
Bumper

150015838
42566644: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-166-5067
Cap And Chain

151665067
44856002: RNCC: 3 | RNVC: 2
44856002: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-120-8196
Speciale Staffetta

151208196
119203: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-119-5429
Piastra In Acciaio

151195429
D0482894: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-188-3550
Manual Control Handle

151883550
120.002.034: RNCC: 3 | RNVC: 2

3 Sep 2009

5340-15-215-7706
Cilindro Da Infilar

152157706
08210-02: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-154-3037
Anodo Anticorrosion

151543037
1P 701236: RNCC: 3 | RNVC: 2
32155-1015: RNCC: 5 | RNVC: 2
1P 701236: RNCC: 5 | RNVC: 9

20 Apr 2001

5340-15-157-4782
Dust And Moisture Seal Protective Cap-Plug

151574782
(241)S346520000-487: RNCC: 3 | RNVC: 2
2 0000-487: RNCC: 3 | RNVC: 2

7 Aug 2003

5340-15-178-5870
Filler Cap

151785870
NC-05-H-2: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-074-4257
Turnbuckle

150744257
2D8UNI20190T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-121-5273
Resilient Mount

151215273
VZA-R-AV-90: RNCC: 3 | RNVC: 2

24 May 1996

5340-15-005-2320
Nut And Bolt Retainer

150052320
6169649: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-102-4653
Tacchetto Speciale

151024653
01-261-16-101: RNCC: 3 | RNVC: 2

13 Jul 1987

5340-15-005-6568
Rosetta Di Spinta

150056568
0-33615: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-121-7349
Clamp

151217349
1576-18-287: RNCC: 3 | RNVC: 2

6 Jul 2000

5340-15-102-6099
Helical Compression Spring Retainer

151026099
47337: RNCC: 3 | RNVC: 2

5 Mar 1993

5340-15-007-0903
Coperchio Speciale

150070903
0-21769: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-201-7146
Cerniera A Libretto

152017146
ART.3850INOX80X60: RNCC: 3 | RNVC: 2

27 Nov 2006

5340-15-218-4517
Fischer Con Vite

152184517
SBM12: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-007-1321
Ring Nut

150071321
1837-27: RNCC: 3 | RNVC: 2

7 Jan 2014

5340-15-057-5193
Turnbuckle

150575193
1127-15-900: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-108-3406
Piastrina Passacavi

151083406
344A0059-001: RNCC: 3 | RNVC: 2

10 Apr 1989

5340-15-212-6893
Collare Fischer

152126893
SCH16-23: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-192-0126
Fascetta

151920126
50880-300: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-108-3473
Assieme Fascetta

151083473
66-4027-03: RNCC: 3 | RNVC: 2

2 May 1989

5340-15-149-3656
Hook

151493656
518-03-1790: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-007-7163
Distanziale Anello

150077163
50090221-317: RNCC: 5 | RNVC: 9

15 Jul 1980

5340-15-121-0937
Sealing Plug Assembly

151210937
160734: RNCC: 3 | RNVC: 2

22 Jan 1996

5340-15-192-0120
Attacco

151920120
45-22047-18-69: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-007-2039
Rubber Bumper

150072039
1388105: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-194-1807
Multiple Angle Bracket

151941807
CST.1193/B-14-F: RNCC: 3 | RNVC: 2

29 Sep 2010

5340-15-062-1962
Brachet Angle

150621962
P-892808-001: RNCC: 3 | RNVC: 2
P892808-001: RNCC: 5 | RNVC: 2

28 Sep 1981

5340-15-155-4447
Protector

151554447
CBD71023P01: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-141-4325
Anodo

151414325
588801: RNCC: 3 | RNVC: 2
588801: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-045-3871
Ghiera

150453871
751-12-70-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-041-7332
Anello Di Arresto

150417332
N1-34022-75T12248: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-045-3913
Ghiera

150453913
N0R4-039-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-120-6457
Coperchio Premiguar

151206457
D0383256: RNCC: 3 | RNVC: 2

26 Jun 1996

5340-15-156-3714
Assembling Bush

151563714
(241)A3460CBD71335P03: RNCC: 3 | RNVC: 2
CBD71335P03: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-135-5867
Fascetta

151355867
L8500A4: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-153-7043
Multiple Angle Bracket

151537043
142006190: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-207-8412
Utility Resilient Mount

152078412
504294809: RNCC: 3 | RNVC: 2
0052805: RNCC: 5 | RNVC: 2

20 Nov 2012

5340-15-117-1194
Corrosion Preventive Anode

151171194
140762: RNCC: 3 | RNVC: 2

1 Feb 1995

5340-15-149-1536
Assieme Rullino

151491536
2302-0038-001: RNCC: 3 | RNVC: 2

7 Dec 1998

5340-15-147-9974
Base Dentata

151479974
129-0640-86-118: RNCC: 3 | RNVC: 2

4 Jun 1998

5340-15-170-8059
Piastra Pre If

151708059
141-2895/03: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-207-8344
Quick Release Plunger

152078344
6394620: RNCC: 3 | RNVC: 2

20 Nov 2012

5340-15-114-4891
Resilient Mount

151144891
CF454345: RNCC: 3 | RNVC: 2
(241)A1508CF45345-R: RNCC: 5 | RNVC: 2
CF45345-R: RNCC: 5 | RNVC: 2

16 Jun 1992

5340-15-214-2318
Doorstop

152142318
500228999: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-116-8520
Corpo Tappo Metalli

151168520
D0454938: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-213-8867
Comando Doppio Per

152138867
UN32: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-212-9451
Anello

152129451
TIBR137SOP: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-236-8651
Manopola In Gomma P

152368651
F-28: RNCC: 3 | RNVC: 2
534015E024642: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-068-1352
Metal Runner

150681352
27457-002A1: RNCC: 3 | RNVC: 2

26 Mar 1986

5340-15-230-2291
Set Materiale Di Fi

152302291
65-2D: RNCC: 3 | RNVC: 2
534015E139953: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-068-1355
Metal Runner

150681355
27732-001D1: RNCC: 3 | RNVC: 2

26 Mar 1986

5340-15-187-6486
Fitting Assy (Rh)

151876486
109-0714-95-106: RNCC: 3 | RNVC: 2
(241)A0126109-0714-95-106: RNCC: 5 | RNVC: 2

15 Apr 2009

5340-15-074-3677
Turnbuckle

150743677
2C8UNI20210T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-149-5993
Bracket

151495993
1230-32-134: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-138-2872
Copritoppa In Accia

151382872
06092-00: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-124-8309
Staffa Anteriore Dx

151248309
93924822: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-009-1262
Arresto Speciale Co

150091262
8280728: RNCC: 3 | RNVC: 2

27 Aug 1979

5340-15-113-9672
Attaccocomplessivo

151139672
214A2025-003: RNCC: 3 | RNVC: 2

31 Mar 1992

5340-15-063-0305
Cap

150630305
39A590-12-55-07: RNCC: 3 | RNVC: 2

4 Jan 1982

5340-15-113-4672
Piastrina

151134672
129-0110-91-105: RNCC: 3 | RNVC: 2

17 Jun 1991

5340-15-175-1200
Vary Hardware

151751200
B12101-658: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-125-5537
Terminale Lamellare

151255537
1301391: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-104-8868
Fissaggio Gaffetta

151048868
4521845: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-127-5891
Molla

151275891
975431: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-115-6988
Giunto Scanalato

151156988
D1402689: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-116-6356
Dust And Moisture Seal Protective Cap

151166356
190507178: RNCC: 3 | RNVC: 2

7 Jun 1993

5340-15-109-7285
Helical Compression Spring Seat

151097285
773841: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-151-7084
Staffa

151517084
0-176614: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-114-1390
Threaded End Tensioning Tie Rod

151141390
01-0622-013: RNCC: 3 | RNVC: 2

4 Jun 1993

5340-15-060-9459
Rim Clen Clamp (1)

150609459
F442D1A10: RNCC: 3 | RNVC: 2
F442D1A-10: RNCC: 5 | RNVC: 2
F442D1A-10: RNCC: 5 | RNVC: 2

22 May 1977

5340-15-112-0111
Extension Drawer Slide

151120111
5152-17: RNCC: 3 | RNVC: 2

26 Nov 1992

5340-15-139-7768
Chiavistello

151397768
1000213: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-198-8168
Protezione

151988168
142024289: RNCC: 3 | RNVC: 2

18 Nov 2004

5340-15-135-9724
Rosetta Elastica

151359724
M103320: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-139-7861
Staffa Fissaggio

151397861
1000898: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-163-1189
Support

151631189
1310165080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-104-4332
Testa Tira Forcella

151044332
3913141: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-149-3371
Multiple Angle Bracket

151493371
99459852: RNCC: 3 | RNVC: 2

28 Jan 1999

5340-15-147-5774
Rubber Protection

151475774
982150197: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-188-9255
Bocchetta Complessi

151889255
109-0362-13-101: RNCC: 3 | RNVC: 2

16 Dec 2009

5340-15-008-2652
Contatto Messa A Te

150082652
135451201: RNCC: 3 | RNVC: 2

1 Feb 1982

5340-15-205-4942
Dust And Moisture Seal Protective Cap

152054942
182719409: RNCC: 3 | RNVC: 2
(241)A0199182719409: RNCC: 5 | RNVC: 2

14 Mar 2012

5340-15-123-8158
Tassello Elastico

151238158
7610157: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-158-4383
Half Hinge

151584383
27915-101: RNCC: 3 | RNVC: 2

15 Feb 2004

5340-15-078-0837
Morsetto

150780837
TM01-63-82: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-054-8826
Dust And Moisture Seal Protective Plug

150548826
533-52-1560: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-222-2268
Pannello 2160X1085

152222268
S1-126B: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-111-5882
Guide

151115882
A12197-01-20: RNCC: 3 | RNVC: 2
A12197-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-219-8239
Rampidi A Vite 20X7

152198239
20X70R: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-193-9630
Angle Bracket

151939630
109-0329-10-119: RNCC: 3 | RNVC: 2

5 Aug 2010

5340-15-170-8242
Maniglia

151708242
340-0094/01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-174-7444
Esag.Inox19 Aisi 30

151747444
51260-12/016: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-061-8917
Electronic Equipment Hardware Kit

150618917
XXI-150: RNCC: 3 | RNVC: 2

5 May 1984

5340-15-199-5064
Handwheel

151995064
VB239/100: RNCC: 3 | RNVC: 2
122517103: RNCC: 5 | RNVC: 2

13 Apr 2005

5340-15-005-4478
Cover Plate Access

150054478
1137-05-254: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-005-2281
Handwheel

150052281
VR180FPIA: RNCC: 3 | RNVC: 2
541-33-1560: RNCC: 5 | RNVC: 2

8 Jun 1983

5340-15-213-8251
Elettroserratura Da

152138251
14460-80: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-112-3756
Coperchio Piano Ape

151123756
60160381: RNCC: 3 | RNVC: 2

7 Oct 1989

5340-15-000-5782
Support Units Fixed

150005782
C0090284: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-15-169-7873
Padlock

151697873
F72018717: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-166-4879
Supporto Per Chiavi

151664879
252NCSV11: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-122-1546
Piastrina Antisvita

151221546
D0468618: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-105-6039
Staffa A Gomito

151056039
4555168: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-194-3599
Support With Half-C

151943599
109-0763-49-9: RNCC: 3 | RNVC: 2

5 Nov 2010

5340-15-066-1742
Clamp

150661742
AT20101-100: RNCC: 3 | RNVC: 2

10 Feb 1986

5340-15-065-2069
Turnbuckle Body

150652069
1376-08-135: RNCC: 3 | RNVC: 2
137608135: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-174-7496
Lamiera 1.5 Piaimg3

151747496
54420-07/021: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-115-8981
Manual Control Lever

151158981
F33-496: RNCC: 3 | RNVC: 2
F33-496: RNCC: 5 | RNVC: 2

1 Feb 1993

5340-15-231-6751
Tampone

152316751
1.2.2175: RNCC: 3 | RNVC: 2
534015E114651: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-153-4033
Elettro-Me Raccordo

151534033
5176-218-00: RNCC: 3 | RNVC: 2

10 Jan 2001

5340-15-150-9464
Attacco

151509464
109-0371-26-103: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-15-116-8597
Astuccio Per Molla

151168597
D0467178: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-068-2328
Anchor Strap

150682328
W011554: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-061-5580
Access Cover Plate

150615580
000200225250: RNCC: 5 | RNVC: 2
000200225250: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-215-7874
Serratura Da Infila

152157874
123-60-01-0: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-170-7489
Prottection Screen

151707489
8500626405: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-210-3152
Scontrino Registrab

152103152
080314: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-153-1580
Tappo

151531580
W013833: RNCC: 3 | RNVC: 2
W013833: RNCC: 5 | RNVC: 2

7 Dec 2000

5340-15-063-7618
Helical Compression Spring Retainer

150637618
4636300: RNCC: 3 | RNVC: 2

2 Oct 1982

5340-15-141-9056
Anodo

151419056
ANSI-B1.20.1: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-115-7137
Ghieranonfilettatae

151157137
D0488725: RNCC: 3 | RNVC: 2

15 Mar 1994

5340-15-166-4811
Cover

151664811
5765161: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-121-9028
Supporto Interfono

151219028
132511914: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-009-8544
Anello Di Rasamento

150098544
0-29111: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-189-3068
Extension Handle

151893068
1 688 040 258: RNCC: 3 | RNVC: 2

11 Feb 2010

5340-15-103-1904
Piastrina

151031904
DE013.12.786: RNCC: 3 | RNVC: 2
(241)A5015DE013.12.786: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-134-4785
Staffetta

151344785
4342670: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-100-1656
Cerniera A Volonta

151001656
39A1215-72: RNCC: 3 | RNVC: 2

6 Dec 1986

5340-15-063-1012
Semiblecchetto Rite

150631012
SF260-13-158-11: RNCC: 3 | RNVC: 2
SF260-13-158-11: RNCC: 5 | RNVC: 9

23 Nov 1982

5340-15-153-1267
Dust And Moisture Seal Protective Plug

151531267
48050000078/11: RNCC: 3 | RNVC: 2

27 Nov 2000

5340-15-170-3492
Plate Assembly

151703492
206-001-541-1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-220-0503
Lamiera Elcom Sys L

152200503
S1-145H: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-214-0905
Inserto A Croce Fre

152140905
F3002: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-117-6416
Tirante A Cerniera

151176416
142507336: RNCC: 3 | RNVC: 2

4 Jan 1994

5340-15-000-4304
Corrosion Preventive Anode

150004304
30118101772: RNCC: 3 | RNVC: 2

1 Mar 2013

5340-15-127-4021
Ghiera Bloccaggio C

151274021
843187: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-009-8542
Anello Di Rasamento

150098542
0-29107: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-213-8234
Cintino In Cotone M

152138234
2041-CC0: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-001-7118
Nut And Bolt Retainer

150017118
8052921: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-166-5182
Maniglia Con Alberi

151665182
TP500080201C251900: RNCC: 1 | RNVC: 2
TP500080201C251900: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-180-4272
Optic Reinforcement

151804272
205-1600-14-104: RNCC: 3 | RNVC: 2
(241)A0126205-1600-14-104: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-149-3741
Frame

151493741
518-01-2130: RNCC: 3 | RNVC: 2

10 Feb 1999

5340-15-102-2355
Pomello Sp Maniglia

151022355
263A1036-001: RNCC: 3 | RNVC: 2

9 Jun 1988

5340-15-193-2427
Angle Bracket

151932427
504193997: RNCC: 3 | RNVC: 2
(241)A4249504193997: RNCC: 5 | RNVC: 2

22 Apr 2010

5340-15-115-8573
Tapped Stri

151158573
295059P1: RNCC: 3 | RNVC: 2
71-02-031-027: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-188-2723
Dust And Moisture Seal Protective Cap

151882723
TF 12 A: RNCC: 3 | RNVC: 2
TAFN08 BLACK: RNCC: 3 | RNVC: 2
99-04-314: RNCC: 5 | RNVC: 2

1 Sep 2009

5340-15-122-7054
Compasso

151227054
X10976-801: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-045-4370
Fascetta

150454370
800-12-09: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-110-2437
Anello Di Fermo

151102437
5627-600-001: RNCC: 3 | RNVC: 2

29 May 1990

5340-15-112-1145
Sostegnoe

151121145
H48-127-38-47-10FF: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-150-4492
Assieme Copertura S

151504492
44272-001: RNCC: 5 | RNVC: 2
44272-001: RNCC: 5 | RNVC: 9

11 Nov 1999

5340-15-153-9330
Speciale Staffa

151539330
142025157: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-199-3824
Turnbuckle

151993824
4.07213.048.00: RNCC: 3 | RNVC: 2
(241)A39630000000132815: RNCC: 5 | RNVC: 2
0000000132815: RNCC: 5 | RNVC: 2

13 Mar 2005

5340-15-214-2548
Cilindro Serratura

152142548
CLNDR-SRR: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-191-8422
Staffa Montaggio Se

151918422
ZFRE0006K: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-105-8138
Turnbuckle Body

151058138
3914141: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-8562
Support

151158562
256900P1: RNCC: 3 | RNVC: 2
71-33-011-020: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-149-4344
Dashpot

151494344
51605-S10-A01: RNCC: 3 | RNVC: 2

1 Mar 1999

5340-15-137-0982
Fascetta

151370982
71913: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-117-9150
Nottolino Di Arrest

151179150
232A1901-402: RNCC: 3 | RNVC: 2

31 Jan 1994

5340-15-154-5254
Corrosion Preventive Anode

151545254
04.1454.000: RNCC: 3 | RNVC: 2

5 Jul 2001

5340-15-117-9580
Helical Compression Spring Seat

151179580
78967F01: RNCC: 3 | RNVC: 2
78967F01: RNCC: 5 | RNVC: 9

21 Mar 1996

5340-15-045-2220
Control Rod

150452220
500-12-12: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-214-5396
Tela Smeriglio In B

152145396
TELASMERIGLIO-GR-100/110MMX26MT: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-059-5391
Rubber Bumper

150595391
741278: RNCC: 3 | RNVC: 2
1127-10-727: RNCC: 5 | RNVC: 2
112710727: RNCC: 8 | RNVC: 2

26 Jun 1978

5340-15-074-4437
Turnbuckle

150744437
2B8UNI20210T60-2012AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-105-6150
Buckle

151056150
2/20328-09.03.74-06: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-196-9929
Padlock

151969929
PN UAS 00031559: RNCC: 3 | RNVC: 2
5340F76028469: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-205-0564
Pipetta Coprimorset

152050564
33090780: RNCC: 3 | RNVC: 2
(241)A500933090780: RNCC: 5 | RNVC: 2

16 Feb 2012

5340-15-203-5556
Piastra Di Montaggi

152035556
504368838: RNCC: 3 | RNVC: 2
(241)A4249504368838: RNCC: 5 | RNVC: 2

8 Jun 2011

5340-15-006-2723
Piastra Speciale

150062723
0-33871: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-139-7076
Gomma Cinghia

151397076
A.0035418: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-119-5393
Coperchio Carenato

151195393
D0481645: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-232-2871
Plate

152322871
9009.3001-1: RNCC: 3 | RNVC: 2
534015E116539: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-150-2504
Distanziale Parapol

151502504
23046-3: RNCC: 3 | RNVC: 2
23046-3: RNCC: 5 | RNVC: 9

2 Sep 1999

5340-15-064-4192
Maniglia

150644192
F492E9-4: RNCC: 3 | RNVC: 2
F492E9-4: RNCC: 5 | RNVC: 2

1 Mar 1984

5340-15-206-8267
Dust And Moisture Seal Protective Cap

152068267
ED0064910130-S: RNCC: 3 | RNVC: 2

23 Jul 2012

5340-15-194-6067
Manual Control Handle

151946067
42558456: RNCC: 3 | RNVC: 2

14 Dec 2010

5340-15-065-6879
Helical Compression Spring Seat

150656879
1Q 245247: RNCC: 3 | RNVC: 2
1Q 245247: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-189-5321
Terminale

151895321
RA6294: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-180-9433
Screw Thread Insert

151809433
999-5000-40-108: RNCC: 3 | RNVC: 2
(241)A0126999-5000-40-108: RNCC: 5 | RNVC: 2

26 Aug 2008

5340-15-234-5057
Piastrina A 2 Posiz

152345057
6644 4 112-01: RNCC: 3 | RNVC: 2
534015E141943: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-198-4111
Eye Hook

151984111
132503258: RNCC: 3 | RNVC: 2

27 Sep 2004

5340-15-120-6863
Supporto Canna Cili

151206863
D0483249: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-183-4959
Mollette Acciaio

151834959
COMM631018030016: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-153-7354
Soffietto Protezion

151537354
142057190: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-101-7444
Piastra Non Forata

151017444
300X300X20DIS44125: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-007-3428
Flangia Speciale

150073428
0-28751: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-113-5707
Metallic Protezione

151135707
23590-001C00: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-189-4928
Raccordo

151894928
N4304S2-125: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-107-1099
Dust And Moisture Seal Protective Plug

151071099
301-02-1330: RNCC: 3 | RNVC: 2

14 Apr 1987

5340-15-107-2335
Attacco A Cerniera

151072335
13890-101: RNCC: 3 | RNVC: 2
13890-101: RNCC: 5 | RNVC: 9

22 Mar 1988

5340-15-232-3869
Rondella Di Bloccag

152323869
5387/52 3-19: RNCC: 3 | RNVC: 2
534015E150124: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-104-4338
Testa Tira Forcella

151044338
8273543: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-110-0321
Attaccosuperiore

151100321
03098-101A01: RNCC: 3 | RNVC: 2
03098-101A1: RNCC: 3 | RNVC: 2

11 Mar 1990

5340-15-189-8149
Fascetta Serracavo

151898149
1703889: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-136-5711
Staffa Di Supporto

151365711
7042M35P01: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-155-9330
Supporto Sinistro C

151559330
60187529: RNCC: 3 | RNVC: 2

7 Oct 2002

5340-15-139-7976
Catenella Completa

151397976
1001703: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-103-8643
Control Rod

151038643
7165229: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-020-3858
Contropiastra

150203858
02-231E22-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-166-4953
Piastrina

151664953
36909071107: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5180
Bullone

151665180
131102020: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-068-4914
Cover Plate Access

150684914
2812-12: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-218-2322
Catenaccio Traverso

152182322
CATTENCM20: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-3845
Plugging Plate

151563845
CBD71342P06: RNCC: 3 | RNVC: 2
(241)A3460CBD71342P06: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-117-4347
Access Door

151174347
585605765021: RNCC: 3 | RNVC: 2

11 Oct 1993

5340-15-154-9337
Adaptor Plate Assy

151549337
CBD71089G01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-120-7593
Dust And Moisture Seal Protective Cap

151207593
420566-247: RNCC: 3 | RNVC: 2

31 Jul 1995

5340-15-101-7848
Fascetta Speciale

151017848
SC32674.85D: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-001-7921
Dust And Moisture Seal Protective Cap-Plug

150017921
4736842: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-001-8015
Angle Bracket

150018015
500404434: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-061-5908
Telaio E Rete Assie

150615908
163GDA1: RNCC: 5 | RNVC: 2
163GDA1: RNCC: 5 | RNVC: 9

12 Oct 1977

5340-15-213-1384
Asta Da 150 Cmper F

152131384
ASTA/CM150/FINESTRA: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-1753
Padlock

151051753
C.S.(1080/IC/II 24.03.59): RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-0989
Electrical-Me Post

151030989
013.09.600: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-139-3722
Collare Fissaggio

151393722
42032709: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-174-7454
Piatto P Ot58 Pb15x

151747454
53140-01/047: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-148-7516
Cappellotto

151487516
2104-0038-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-110-9006
Assiemecernierainfe

151109006
369H2417-1002: RNCC: 3 | RNVC: 2

4 May 1990

5340-15-049-7527
Fascetta

150497527
AB47-706-217-13: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-113-4776
Strisciaincollaggio

151134776
113A6011-404: RNCC: 3 | RNVC: 2

26 Mar 1991

5340-15-138-5178
Tirante

151385178
7545650: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-074-4220
Turnbuckle

150744220
1C6UNI20190T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-122-9463

5340-15-142-5824
Sfera

5340-15-186-7232
Maniglia Per Cassa

151867232
MANIGLIAPERCASSA: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-005-8544
Morsetto Serratubi

150058544
M730-12-08: RNCC: 3 | RNVC: 2

21 Apr 1976

5340-15-155-4916
Cylinder Bush

151554916
CBD71128P03: RNCC: 3 | RNVC: 2

28 Mar 2002

5340-15-089-6144
Cavallotto Sostegno

150896144
72-049-201: RNCC: 3 | RNVC: 2
72-049-201: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-127-4132
Molletta

151274132
1488-38-005: RNCC: 3 | RNVC: 2
1488-38-005: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-063-1302
Maniglia Compl Con

150631302
624IPS: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-157-9834
Hinge Half

151579834
J94345413-001: RNCC: 3 | RNVC: 2

14 Dec 2003

5340-15-136-9066
Anello

151369066
NAS670-46: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-138-2883
Padlock

151382883
265/94: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-230-4639
Manicotto Abrasivo

152304639
PCH11L: RNCC: 3 | RNVC: 2
534015E064963: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-120-6760
Supporto Gruppo Seg

151206760
D1401594: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-112-8232
Puntalino

151128232
466457: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-210-2610
Chiave Per Cassafor

152102610
STUV: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-006-2799
Nut And Bolt Locking Plate

150062799
1026-04-164: RNCC: 3 | RNVC: 2

29 Jul 1977

5340-15-170-3028
Hook Cable

151703028
288187-P1: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-154-1960
Multiple Angle Bracket

151541960
0-164073: RNCC: 3 | RNVC: 2
(241)A39630-164073: RNCC: 5 | RNVC: 2
1PA39630-164073: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-116-0541
Helical Compression Spring Retainer

151160541
1P 287766: RNCC: 3 | RNVC: 2
1P 287766: RNCC: 5 | RNVC: 9

15 Dec 1993

5340-15-055-6675
Supporto Per Teleru

150556675
543804: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-121-7476
Double Angle Bracket

151217476
8518005: RNCC: 3 | RNVC: 2

14 Feb 1996

5340-15-004-2603
Resilient Mount

150042603
1385588: RNCC: 3 | RNVC: 2
1385588: RNCC: 5 | RNVC: 9

21 Jun 1977

5340-15-201-3080
Escutcheon Plate

152013080
162530162: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-219-7169
Dima Per Caricament

152197169
B80X100H116: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-002-2974
Manual Control Handle

150022974
22900-00501: RNCC: 3 | RNVC: 2

5 Aug 2013

5340-15-194-2779
Dust And Moisture Seal Protective Cover

151942779
842022774: RNCC: 3 | RNVC: 2

26 Oct 2010

5340-15-105-5957
Staffa A Gomito

151055957
4972732: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-004-8143
Threaded End Tensioning Tie Rod

150048143
0-33422: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-200-4573
Dust And Moisture Seal Protective Plug

152004573
V36837.00: RNCC: 3 | RNVC: 2
(241)A4447V36837.00: RNCC: 5 | RNVC: 2

23 Jan 2006

5340-15-157-9248
Piastra Di Supporto

151579248
0-170655: RNCC: 3 | RNVC: 2
(241)A39630-170655: RNCC: 5 | RNVC: 2
1PA39630-170655: RNCC: 5 | RNVC: 2

25 Nov 2003

5340-15-068-2330
Anchor Strap

150682330
W011567: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-120-6876
Porta Pan Copertura

151206876
D0471515: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-212-2157
Tasselli Con Vite

152122157
SLM8VITE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-074-4019
Turnbuckle

150744019
1A39UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-201-9651
Riparo

152019651
76042016: RNCC: 3 | RNVC: 2
(241)AD75176042016: RNCC: 5 | RNVC: 2
76042016: RNCC: 5 | RNVC: 2

17 Jan 2007

5340-15-151-1448
Assieme Staffa Di F

151511448
381-0355/01: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-15-179-7273

5340-15-192-2779
Adattatore

151922779
LW16878: RNCC: 3 | RNVC: 2

2 Mar 2010

5340-15-206-3550
Angle Bracket

152063550
50040 5356: RNCC: 3 | RNVC: 2

4 Jun 2012

5340-15-205-5489
Dust And Moisture Seal Protective Cap-Plug

152055489
182702129: RNCC: 3 | RNVC: 2
(241)A0199182702129: RNCC: 5 | RNVC: 2

19 Mar 2012

5340-15-101-9185
Helical Compression Spring Seat

151019185
D5364007Q: RNCC: 3 | RNVC: 2
D5364007Q: RNCC: 5 | RNVC: 9

24 Nov 1992

5340-15-178-9529
Dust And Moisture Seal Protective Plug

151789529
SL5557: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-074-4318
Turnbuckle

150744318
1B64UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-121-6647
Plaque D'arret

151216647
800058086: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-121-6604
Plaque Butee

151216604
800053147: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-203-0310
Supporto Motore Pom

152030310
1040122: RNCC: 3 | RNVC: 2
(241)A50091040122: RNCC: 5 | RNVC: 2

19 Nov 2007

5340-15-136-1429
Fermaglio

151361429
105.3111: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-220-0470
Piatto 100 Sp6 L964

152200470
S1-9D: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-101-8495
Turnbuckle

151018495
66-1737-72: RNCC: 3 | RNVC: 2

25 Feb 1986

5340-15-133-0415
Staffetta

151330415
01000763: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-110-5732
Helical Compression Spring Seat

151105732
530133: RNCC: 2 | RNVC: 2
1P 530133: RNCC: 3 | RNVC: 2
1P 530133: RNCC: 5 | RNVC: 9
530133: RNCC: 5 | RNVC: 9

16 Oct 1996

5340-15-121-6509
Mechanic Equipment Hardware Kit

151216509
800049013: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-156-3821
Dust And Moisture Seal Protective Plug

151563821
142041345: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-020-2085
Ponticello Ancoragg

150202085
01-231Q42: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-066-5342
Anodo

150665342
GB25TOR: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-236-8587
Tirante Per Gruppo

152368587
110CM/1050-302: RNCC: 3 | RNVC: 2
534015E054935: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-170-3333
Support

151703333
205-706-013-1107: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-217-7909
Cardine In Barre

152177909
328-9688: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-108-6326
Plastic Bumper

151086326
93916937: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-148-6645
Detent Plunger

151486645
190540152: RNCC: 3 | RNVC: 2

17 Sep 1998

5340-15-105-2077
Rubber Bumper

151052077
4974433: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-215-3929
Catena Genovese Zin

152153929
3219030: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-121-3516
Resilient Mount

151213516
VZA 40: RNCC: 3 | RNVC: 2

3 Apr 1996

5340-15-108-2898
Staffa

151082898
60129762: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-006-8962
Control Rod

150068962
39X500-12-32: RNCC: 3 | RNVC: 2

2 Jan 1979

5340-15-064-4393
Dust And Moisture Seal Protective Cap

150644393
1355-04-120: RNCC: 3 | RNVC: 2

27 Oct 1983

5340-15-103-8190
Supporto Protezione

151038190
23683-101: RNCC: 3 | RNVC: 2

22 Mar 1988

5340-15-149-7551
Gancio Coperchio

151497551
519565-02: RNCC: 3 | RNVC: 2

24 Jun 1999

5340-15-185-1869
Filtro Ricambio

151851869
MOD100: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-231-1780
Tassello Elastico

152311780
60812727: RNCC: 3 | RNVC: 2
534015E099642: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-178-7702
Dashpot

151787702
020245: RNCC: 3 | RNVC: 2

19 Oct 2005

5340-15-157-7101
Turnbuckle

151577101
TENDITORE 8MM ACCIAIO: RNCC: 3 | RNVC: 2

16 Oct 2003

5340-15-230-5266
Collare Cuffia

152305266
802660010: RNCC: 3 | RNVC: 2
534015E158107: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-115-3433
Starter Cap

151153433
270-9055-003: RNCC: 3 | RNVC: 2
82-01600: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-113-2534
Compless Protezione

151132534
377A1539-401: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-122-1401
Block

151221401
A39505-001: RNCC: 3 | RNVC: 2
A-39505-001: RNCC: 3 | RNVC: 2

21 May 1996

5340-15-179-2867
Manual Control Handle

151792867
IR.612/56S.D.16: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-179-0019
Cover Assembly

151790019
RS 411 865 BE: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-213-8811
Cerniera Regolabile

152138811
424IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-106-9619
Supporto

151069619
1368532: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-166-4950
Assieme Supporto

151664950
4023012: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-153-7650
Staffa Per Tubazion

151537650
01100R101300: RNCC: 5 | RNVC: 2
01100R101300: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-151-3024
Access Cover

151513024
541012600: RNCC: 3 | RNVC: 2
554101260000: RNCC: 5 | RNVC: 2

8 Jun 2000

5340-15-127-4967
Piastrina Di Regist

151274967
861290: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-148-9145
Anello Raschiaolio

151489145
PNE301018-002: RNCC: 3 | RNVC: 2

29 Oct 1998

5340-15-126-5199
Molla

151265199
49-954-94: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-123-1393
Rondella

151231393
4734221: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-186-8243
Key Blank

151868243
LF22: RNCC: 3 | RNVC: 2

5 Jan 2009

5340-15-111-3829
Cernierasagomataspe

151113829
117A2120-401: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-141-9419
Anodo

151419419
920006-29: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-200-9867
Corrosion Preventive Anode

152009867
115659/EQ69453/Ir: RNCC: 3 | RNVC: 2
(241)A5205115659/EQ69453/Ir: RNCC: 5 | RNVC: 2

26 Apr 2006

5340-15-117-2511
Dust And Moisture Seal Protective Plug

151172511
M13-001P002: RNCC: 3 | RNVC: 2

22 Sep 1993

5340-15-105-4926
Cinghia Puntalino

151054926
2/25010-23.11.71-04: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-170-3720
Closed Plate

151703720
206-061-813-7: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-109-4367
Modulo Protezioni C

151094367
104-1456/01: RNCC: 3 | RNVC: 2

21 Apr 1989

5340-15-101-3010
Slide Lh

151013010
297133P1: RNCC: 3 | RNVC: 2

30 Jan 1988

5340-15-105-2081
Rubber Bumper

151052081
1350839: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-074-4380
Turnbuckle

150744380
2C39UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-105-6314
Collare Serraggio

151056314
10418601: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-114-3174
Guida

151143174
CF431414: RNCC: 3 | RNVC: 2

4 Jun 1992

5340-15-216-3748
Supporto

152163748
ML.04.SU: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-074-4097
Turnbuckle

150744097
1C9UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-115-4032
Resilient Mount

151154032
790321198: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-118-9947
Anchor Strap

151189947
9817149: RNCC: 3 | RNVC: 2

4 Jul 1994

5340-15-150-5871
Attacco Speciale

151505871
A37682-01-20: RNCC: 3 | RNVC: 2

26 Jan 2000

5340-15-118-0512
Piastrina Rettangol

151180512
D0488477: RNCC: 3 | RNVC: 2

5 Dec 1994

5340-15-106-0828
Chiusura Ad Agganci

151060828
12.513.050: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-055-0906
Anello Elastico Spe

150550906
N3709-18-1E2: RNCC: 3 | RNVC: 2

21 Jul 1972

5340-15-122-9433
Supporto

151229433
212-070-109-2: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-213-8756
Contropiastra Metal

152138756
06465-08: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-109-8948
Giunto Scanalato

151098948
468478: RNCC: 3 | RNVC: 2
D0468478: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-162-2343
Stop Mechanism Atta

151622343
C629504600: RNCC: 3 | RNVC: 2

17 May 2001

5340-15-147-6726
Impugnatura

151476726
224A6029-007: RNCC: 3 | RNVC: 2

26 Feb 1998

5340-15-115-8571
Bracket

151158571
71-02-023-008: RNCC: 3 | RNVC: 2
273666G2: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-198-0872
Supporto

151980872
08218-102: RNCC: 3 | RNVC: 2

10 Jun 2004

5340-15-176-9498
Protezione

151769498
6840364-05: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-153-3361
Structual Angle

151533361
109-0640-57-19: RNCC: 3 | RNVC: 2

14 Dec 2000

5340-15-068-6616
Handwheel

150686616
27-159-46: RNCC: 3 | RNVC: 2
27-159-46: RNCC: 5 | RNVC: 2
(241)AD75127159-46: RNCC: 5 | RNVC: 2

22 May 1986

5340-15-101-7462
Piastra Non Forata

151017462
500X200X20DIS44125: RNCC: 3 | RNVC: 2

10 Oct 1986

5340-15-007-8847
Perno Completo

150078847
8296660: RNCC: 3 | RNVC: 2

26 Apr 1979

5340-15-121-9069
Dispositivo Di Bloc

151219069
132506551: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-121-9195
Resilient Mount

151219195
93803960: RNCC: 3 | RNVC: 2

29 Mar 1996

5340-15-051-2807
Nut And Bolt Retainer

150512807
891468: RNCC: 3 | RNVC: 2
891468: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-198-4845
Dust And Moisture Seal Protective Plug

151984845
(241)A0126A488A105B: RNCC: 3 | RNVC: 2
A488A105B: RNCC: 3 | RNVC: 2

6 Oct 2004

5340-15-102-7193
Nut And Bolt Locking Plate

151027193
79025718: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-105-2076
Rubber Bumper

151052076
389341: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-198-8169
Semicerniera

151988169
142024290: RNCC: 3 | RNVC: 2

18 Nov 2004

5340-15-230-7735
Paracolpi Sh43 15X1

152307735
C36951564: RNCC: 3 | RNVC: 2
534015E074290: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-197-6614
Speciale Graffetta

151976614
1M01723005: RNCC: 3 | RNVC: 2

19 Apr 2004

5340-15-124-3830
Prolunga Lunghezza

151243830
360.017: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-101-7459
Piastra Forata

151017459
P20: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-122-3726
Tassello In Acciaio

151223726
D1401317: RNCC: 3 | RNVC: 2

12 Jun 2000

5340-15-006-7126
Adapter

150067126
30063-407: RNCC: 3 | RNVC: 2

9 Jan 1980

5340-15-156-3391
Trasportatore

151563391
(241)A3460CBD71244P01: RNCC: 3 | RNVC: 2
CBD71244P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-050-4082
Fascetta

150504082
6008-147: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-152-1512
Tappo In Gomma

151521512
4885967: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-15-178-9919
Support Assembly

151789919
RS 404 607 AX: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-195-0115
Compl Antivibrante

151950115
45612013A: RNCC: 3 | RNVC: 2
(241)A243745612013A: RNCC: 5 | RNVC: 2

16 Feb 2011

5340-15-186-2577
Srotolatore Univers

151862577
0956109: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-198-3927
Corrosion Preventive Anode

151983927
31626: RNCC: 3 | RNVC: 2
(241)A010631626: RNCC: 5 | RNVC: 2

24 Sep 2004

5340-15-231-1244
Tassello Elastico

152311244
5920297: RNCC: 3 | RNVC: 2
534015E069164: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-211-6032
Staffa Ponte Per Pa

152116032
MM60: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-101-7440
Piastra Non Forata

151017440
400X400X20DIS44125: RNCC: 3 | RNVC: 2

8 Oct 1986

5340-15-120-6910
Coperchietto In Acc

151206910
D0470526: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-157-4142
Dashpot

151574142
000449: RNCC: 3 | RNVC: 2
(241)A3593000449: RNCC: 5 | RNVC: 2

11 Jul 2003

5340-15-127-5635
Boccola Vite Accell

151275635
897291: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-127-3201
Staffetta

151273201
728637: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-149-5932
Handle Bow

151495932
341-4589/02: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-231-7786
Cinghia Singola Per

152317786
534015E112344: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-231-4436
Ruota Con Supporto

152314436
SKM: RNCC: 3 | RNVC: 2
534015E062794: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-112-8020
Threaded End Tensioning Tie Rod

151128020
244A1787-003: RNCC: 3 | RNVC: 2

27 Oct 1990

5340-15-060-7086
Cerniera Compl Ante

150607086
109-0310-46-1: RNCC: 3 | RNVC: 2

14 Dec 1976

5340-15-156-7969
Volantino

151567969
11GJ04343024S01-003/N: RNCC: 3 | RNVC: 2

6 Mar 2003

5340-15-205-2628
Paracolpo In Strisc

152052628
D1-27011-001: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-194-0933
Dust And Moisture Seal Protective Cap-Plug

151940933
IPT3181-14CF: RNCC: 3 | RNVC: 2
IPT3181-14CF: RNCC: 5 | RNVC: 2
IPT3181-14CF: RNCC: 5 | RNVC: 2

30 Aug 2010

5340-15-006-0149
Anchor Strap

150060149
B512TL421: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-121-6264
Anchor Strap

151216264
800027328: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-179-0740
Scatola Porta Indic

151790740
76066667: RNCC: 3 | RNVC: 2
(241)A398076066667: RNCC: 5 | RNVC: 2

20 Apr 2006

5340-15-000-4694
Kit Di Mascherament

150004694
CTKIT2: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-15-204-9991
Scatola Diffusori

152049991
60190458: RNCC: 3 | RNVC: 2
(241)A424960190458: RNCC: 5 | RNVC: 2

8 Feb 2012

5340-15-154-5554
Gruppo Bielletta

151545554
3628-50: RNCC: 3 | RNVC: 2
3628-50: RNCC: 5 | RNVC: 9

13 Jul 2001

5340-15-127-5464
Guarnizione Pass.Gu

151275464
882590: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-120-6882
Coperchio Portamoll

151206882
D0471324: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-139-8057
Tirante Elastico

151398057
1001946: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-212-5979
Ruota Piroettante

152125979
RS399-4790: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-206-5853
Corrosion Preventive Anode

152065853
FX2: RNCC: 3 | RNVC: 2
(241)AJ578FX2: RNCC: 5 | RNVC: 2

26 Jun 2012

5340-15-006-3055
Turnbuckle Body

150063055
P-180025-001: RNCC: 3 | RNVC: 2
P180025-001: RNCC: 5 | RNVC: 2

24 Nov 1979

5340-15-142-6964
Anodo

151426964
701296: RNCC: 3 | RNVC: 2
701296: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-108-9778
Nonrotating Shaft Eye Bracket

151089778
32-03-026: RNCC: 3 | RNVC: 2

10 Apr 1990

5340-15-185-5981
Ruota Con Supporto

151855981
388A-120: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-068-3356
Staffetta Speciale

150683356
129052: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-105-2080
Rubber Bumper

151052080
8983364: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-1951
Blocchetto Per Mors

151031951
DE013.13.358: RNCC: 3 | RNVC: 2

2 Oct 1987

Load More Results