5340-15-002-3601

Documents 5950-01-005-3586 1+ Documents ( More... ) https//www.nsnlookup.com /fsg-53/fsc-5340/it 5340-15-002-3601
Bridge Clamp 5340150023601 150023601,4852221 Documents 5340-15-002-3601 1+ Documents (More... )
us 5950-01-005-3586 59500100535860100535865950-01-005-35865950010053586010053586 Restrictions 5340-15-002-3601

14-553-5030 https//www.nsnlookup.com /cage Iveco France (CAGE Code FAKT4) DAC: 4 20 Sep 2007 5340-15-002-3601

5307-14-485-2221 5307144852221 144852221 is a headless fastener not exceeding 12 inches (304.8 mm) in length, threaded externally on both ends with threads of the same nominal diameter. all or part of the unthreaded section has a cross-sectional diameter greater than the nominal stud size plus 0.020 inches (0.508 mm). it may be thread relieved. see also stud, locked in.

5305-33-005-3586 5305330053586 330053586 is an externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.

5305-01-485-2221 5305014852221 014852221 is an externally threaded fastener designed for insertion into holes in assembled parts, for mating with a preformed internal thread and for tightening or releasing by torquing the head. the threaded and unthreaded portions are both of the same nominal diameter of 0.190 inch (5 mm) or larger. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. the thread length being the controlled dimension, the grip length is not specified. a locking feature may be incorporated in the design of the head or threads. the head is not designed to be held or driven with an inserted driver or by the thumb and fingers. excludes bolt,machine; bolt,externally relieved body; bolt,internal wrenching; and screw,cap,socket head.