What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 53 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 53 of 72

5340-15-060-2799
Rubber Bumper

150602799
22158-101A1: RNCC: 3 | RNVC: 2

14 Feb 1977

5340-15-193-6849
Tie Rod

151936849
E10TK020A: RNCC: 3 | RNVC: 2

30 Jun 2010

5340-15-074-4245
Turnbuckle

150744245
1D8UNI20190T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-111-5965
Handle

151115965
A05644-01-20: RNCC: 3 | RNVC: 2
A05644-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-120-6900
Supporto Manometri

151206900
D0470962: RNCC: 3 | RNVC: 2

30 Apr 1996

5340-15-120-6764
Piastrina Forata Ca

151206764
D1401541: RNCC: 3 | RNVC: 2

29 Jun 1996

5340-15-175-8801
Serratura Foro Yale

151758801
PS3020450: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-148-9211
Tampone Posteriore

151489211
00359: RNCC: 3 | RNVC: 2

2 Nov 1998

5340-15-137-2629
Fascetta

151372629
MS21919D10: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-170-3599
Clip

151703599
206-031-427-7: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-118-1155
Helical Compression Spring Seat

151181155
1P 554468: RNCC: 3 | RNVC: 2
1P 554468: RNCC: 5 | RNVC: 9

22 Mar 1996

5340-15-219-4661
Sonda Nylon-Acciaio

152194661
406817: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-147-5772
Soupape

151475772
982150125: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-117-5853
Special Protezione

151175853
190516217: RNCC: 3 | RNVC: 2

24 Nov 1993

5340-15-136-2866
Accessori Montaggio

151362866
5955331: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-121-8987
Supporto Ventilator

151218987
142520909: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-212-9966
Cerniera Anube Per

152129966
ART.306831: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-061-5594
Access Cover Plate

150615594
1200096-15B000003: RNCC: 5 | RNVC: 2
000200085300: RNCC: 5 | RNVC: 2
000200085300: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-151-7079
Staffa

151517079
0-159016: RNCC: 3 | RNVC: 2
(241)A39630-159016: RNCC: 5 | RNVC: 2
1PA39630-159016: RNCC: 5 | RNVC: 2

3 Jul 2000

5340-15-222-2628
Dust Cap

152222628
HP-016-5-00000-12-1: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-209-5361
Confezione Punti Ra

152095361
CONF-RAPID 13P: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-062-3229
Cover Plate Access

150623229
306501: RNCC: 3 | RNVC: 2

3 May 1980

5340-15-103-1961
Speciale Griglia

151031961
DE013.13.405: RNCC: 3 | RNVC: 2
(241)A5015DE013.13.405: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-153-7053
Rubber Bumper

151537053
142010288: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-132-8729
Tubo Scari Collare

151328729
0110044: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-180-4270
Nonmetallic Channel

151804270
205-1600-10-281: RNCC: 3 | RNVC: 2
(241)A0126205-1600-10-281: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-054-0756
Semicerniera Su Cap

150540756
260-18-19-13: RNCC: 3 | RNVC: 2
260-18-19-13: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-105-8238
Indotto Supporto

151058238
503-03-3249: RNCC: 5 | RNVC: 2
503-03-3249: RNCC: 5 | RNVC: 9

30 May 1989

5340-15-122-5070
Cover Prote

151225070
01TL21485: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-201-7153
Kit Piastrina

152017153
V38170.00: RNCC: 3 | RNVC: 2
(241)A4447V38170.00: RNCC: 5 | RNVC: 2

28 Nov 2006

5340-15-194-8374
Accessorio Porta

151948374
714: RNCC: 1 | RNVC: 2
(241)A3319714: RNCC: 3 | RNVC: 2

24 Jan 2011

5340-15-213-8813
Barra Ovale Orizzon

152138813
945 938: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-204-4893
Clamp Half

152044893
42563773: RNCC: 3 | RNVC: 2
CV179051A: RNCC: 5 | RNVC: 2
7118857: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-101-8964
Sadd Pipe Support

151018964
1Q575532: RNCC: 3 | RNVC: 2
1Q575532: RNCC: 5 | RNVC: 9

25 Nov 1992

5340-15-209-5006
Anello

152095006
3000-100: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-234-5017
Staffa Da 30 Coppie

152345017
6050.3.122-03: RNCC: 3 | RNVC: 2
534015E046246: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-156-3838
Plugging Plate

151563838
CBD71340P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71340P01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-113-1575
Cappucciodiprotezio

151131575
93155712: RNCC: 3 | RNVC: 2

23 Feb 1989

5340-15-122-1545
Coperchietto Con Di

151221545
D0466970: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-003-9031
Stand Base

150039031
182707828: RNCC: 3 | RNVC: 2
(241)A0199182707828: RNCC: 5 | RNVC: 2

2 Dec 2013

5340-15-217-6903
Chiave Per Pilette

152176903
99548: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-186-7513
Dado Per Vite Scari

151867513
325.070: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-219-9494
Lucchetto In Ottone

152199494
22010-20: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-178-6095
Manual Control Lever

151786095
109-0506-05-11: RNCC: 3 | RNVC: 2

17 Aug 2005

5340-15-133-2836
Cardano Dx

151332836
05448-002: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-170-8694
Manicotto Marcafilo

151708694
67133-03/031: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-174-7484
Piatto 100X25 Peals

151747484
54130-01/303: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-120-6502
Sfogo Di Aria

151206502
D0375740: RNCC: 3 | RNVC: 2

30 Apr 1996

5340-15-122-2488
Te Superieur

151222488
80A068881: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-007-3312
Anchor Strap

150073312
1127-21-820: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-202-7827
Protect Blank Panel

152027827
N651U3132201: RNCC: 3 | RNVC: 2
(241)A0126N651U3132201: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-15-220-2595
Confezione Da 25 Ta

152202595
ART.8701006: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-109-8686
Access Door Locking Ring

151098686
60131740: RNCC: 3 | RNVC: 2

15 Oct 1988

5340-15-116-4866
Double Angle Bracket

151164866
60164824: RNCC: 3 | RNVC: 2

20 May 1993

5340-15-124-4294
Cavi Batteria

151244294
BC20500: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-007-6975
Cover Plate Access

150076975
1141-39-910: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-109-5757
Electrical-Me Post

151095757
20200136A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-157-1762
Air Exhaust Shield

151571762
(241)A3460CBD71314P12: RNCC: 3 | RNVC: 2
CBD71314P12: RNCC: 3 | RNVC: 2

13 May 2003

5340-15-001-6451
Molla

150016451
174010008: RNCC: 3 | RNVC: 2
174010008: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-219-9544
Elettroserratura

152199544
952/70: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-206-9960
Asta Bloccaggio Por

152069960
111459: RNCC: 3 | RNVC: 2
(241)A3593111459: RNCC: 5 | RNVC: 2

6 Aug 2012

5340-15-113-1752
Fermaglioelasticosa

151131752
312A6585-001: RNCC: 3 | RNVC: 2

7 Sep 1990

5340-15-122-0448
Manual Contr Roller

151220448
793104: RNCC: 3 | RNVC: 2

23 Apr 1996

5340-15-121-9044
Supporto Saldato Co

151219044
142507934: RNCC: 3 | RNVC: 2

19 Mar 1996

5340-15-105-6004
Staffa A Gomito

151056004
1/016120: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-219-9577
Carrucola In Ottone

152199577
CARRUCOL30MM CON GANCIO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-005-4479
Cover Plate Access

150054479
1137-09-170: RNCC: 3 | RNVC: 2

28 Sep 1981

5340-15-199-5212
Speciale Cerniera

151995212
122607356: RNCC: 3 | RNVC: 2

13 Apr 2005

5340-15-205-1050
Window Plug Plate

152051050
TP600626: RNCC: 3 | RNVC: 2

21 Feb 2012

5340-15-063-7771
Cover Plate Access

150637771
4981056: RNCC: 3 | RNVC: 2

31 Mar 1982

5340-15-063-2815
Double Angle Bracket

150632815
60109194: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-170-8016
Piano Cofano Presso

151708016
340-0241/04: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-117-7646
Resilient Mount

151177646
AVAU-708D-170-75: RNCC: 3 | RNVC: 2

27 Sep 1994

5340-15-117-8916
Helical Compression Spring Seat

151178916
TN4-0003-003-07: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-15-170-8566
Lastra 12 Policarbo

151708566
58238-03/007: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-170-8254
Leva Di Ancoraggio

151708254
340-4410/01.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-206-2818
Stand Base

152062818
34861: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-148-7589
Attacco Estintore

151487589
A072A03: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-153-1616
Anello Di Fermo

151531616
W029419: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-15-120-1530
Resilient Mount

151201530
Q801289: RNCC: 3 | RNVC: 2
Q801289: RNCC: 5 | RNVC: 2

17 Jan 1995

5340-15-063-6127
Cover Plate Access

150636127
4695921: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-219-3031
Lucchetto Mm60

152193031
2101060: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-113-6082
Circlip Roc

151136082
AC121554/1-3: RNCC: 3 | RNVC: 2

20 Jan 1992

5340-15-181-8795
Rampino Dritto A Vi

151818795
20X70: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-068-2555
Piastra

150682555
RS 401 734 C: RNCC: 3 | RNVC: 2

27 Oct 1984

5340-15-210-7032
Filetto Riportato 5

152107032
512403: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-104-8846
Fissaggio Gaffetta

151048846
10418105: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-112-0558
Dispositivo Di Supp

151120558
231A1305-403: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-154-9323
Dust And Moisture Seal Protective Cap-Plug

151549323
CBD71056G01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-089-9363
Dust And Moisture Seal Protective Cap

150899363
A64202: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-207-0432

5340-15-113-5708
Protezione Supporto

151135708
23683-001: RNCC: 3 | RNVC: 2

14 Jan 1992

5340-15-045-0874
Threaded End Tensioning Tie Rod

150450874
506-25-08: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-109-4841
Helical Compression Spring Seat

151094841
513173: RNCC: 2 | RNVC: 2
1P 513173: RNCC: 3 | RNVC: 2
1P 513173: RNCC: 5 | RNVC: 9
513173: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-206-3078
Rod Retainer Clip

152063078
45501046: RNCC: 3 | RNVC: 2
Z07.07.11.00: RNCC: 5 | RNVC: 2
2530PL0916194: RNCC: 6 | RNVC: 9

1 Jun 2012

5340-15-214-6616
Morsetto

152146616
EXRI3109014: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-123-8042
Serratura Sovrappos

151238042
ART.7603: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-147-3084
Bracket

151473084
302951: RNCC: 3 | RNVC: 2

31 Oct 1997

5340-15-156-3367
Support

151563367
(241)A3460CBD71231P01: RNCC: 3 | RNVC: 2
CBD71231P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-051-4257
Molla

150514257
9911908: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-102-2036
Supporto

151022036
V109947: RNCC: 3 | RNVC: 2

30 Jul 1988

5340-15-135-9924
Tassello

151359924
4154542: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-170-8018
Fianco Cofano Press

151708018
340-0241/07: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-182-6751
Aste Verticali

151826751
0708115: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-182-4768
Fermo Maniglia Alza

151824768
8264321000: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-061-4703
Supporto Angolare S

150614703
P135238-001: RNCC: 3 | RNVC: 2

26 Jan 1978

5340-15-180-7025
Utility Resilient Mount

151807025
2-2314.003: RNCC: 3 | RNVC: 2
22314003: RNCC: 5 | RNVC: 2
CV146354: RNCC: 5 | RNVC: 2

7 Jul 2008

5340-15-108-1056
Ausgleichsgew

151081056
X667-10: RNCC: 3 | RNVC: 2
X667-10: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-194-2089
Bracket Install Bat

151942089
277A1664-401: RNCC: 3 | RNVC: 2
(241)A0019277A1664-401: RNCC: 5 | RNVC: 2

5 Oct 2010

5340-15-100-1515
Helical Compression Spring Seat

151001515
7262-14: RNCC: 3 | RNVC: 2
7262-14: RNCC: 5 | RNVC: 9

31 Mar 1987

5340-15-150-3911
Dust And Moisture Seal Protective Cap

151503911
M241: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-15-109-3103
Gancioperancoraggio

151093103
60102556: RNCC: 3 | RNVC: 2

20 Apr 1988

5340-15-113-8564
Threaded End Tensioning Tie Rod

151138564
1Z 585248: RNCC: 3 | RNVC: 2
1Z 585248: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-177-5782
Handwheel

151775782
VC.254/85B-M16: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-053-0684
Frame

150530684
116217G1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-123-0690
Molla

151230690
95631633: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-105-6344
Collare Serraggio

151056344
10170990: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-117-9905
Resilient Mount

151179905
AVAUD 910L-E: RNCC: 3 | RNVC: 2

2 Nov 1994

5340-15-003-1059
Manual Control Lever

150031059
182719083: RNCC: 3 | RNVC: 2
(241)A0199182719083: RNCC: 5 | RNVC: 2

25 Oct 2013

5340-15-149-6117
Frame

151496117
518-38-1020: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-062-7968
Threaded End Tensioning Tie Rod

150627968
0-34407: RNCC: 3 | RNVC: 2

28 Aug 1982

5340-15-187-1925
Screw Thread Insert

151871925
MIF6.1: RNCC: 3 | RNVC: 2
(241)A3980MIF6.1: RNCC: 5 | RNVC: 2

24 Feb 2009

5340-15-142-9455
Supporto Elastico

151429455
98.1.10810: RNCC: 3 | RNVC: 2
575429: RNCC: 3 | RNVC: 2
575429: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-151-7090
Staffa

151517090
0-177655: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-119-3162
Bride De Fixation

151193162
79030213: RNCC: 3 | RNVC: 2

11 Jul 1994

5340-15-230-7188
Supporto Antivibraz

152307188
8635.059: RNCC: 3 | RNVC: 2
534015E150315: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-115-2351
Half Handle

151152351
1137-16-207: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-141-1201
Tassello Con Vite I

151411201
1909: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-113-9955
Sacca Per Accumulat

151139955
7094215500225: RNCC: 3 | RNVC: 2

14 Nov 1992

5340-15-162-6410
Preheater He Bundle

151626410
1Z 593246: RNCC: 3 | RNVC: 2
1Z 593246: RNCC: 5 | RNVC: 9

7 Dec 2001

5340-15-127-1516
Maniglia Inferiore

151271516
616732: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-141-8679
Handwheel

151418679
544217: RNCC: 3 | RNVC: 2
544217: RNCC: 5 | RNVC: 9

9 Jun 1997

5340-15-207-0795
Pin Assy

152070795
109-3000-03-109: RNCC: 3 | RNVC: 2

31 Aug 2012

5340-15-063-2642
Resilient Mount

150632642
2521718: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-181-6627
Stampi Lamiera Alfa

151816627
MM60: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-154-9319
Protective Cover

151549319
CBD71018P01: RNCC: 3 | RNVC: 2

13 Nov 2001

5340-15-074-4151
Turnbuckle

150744151
1D10UNI20180TT0NEZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-058-4695
Resilient Mount

150584695
99A487-516: RNCC: 3 | RNVC: 2

2 Jul 1976

5340-15-149-5277
Stand Base (1)

151495277
112736362: RNCC: 3 | RNVC: 2

31 Jan 2000

5340-15-115-1944
Cable Adaptor Plate

151151944
560-5200-108: RNCC: 3 | RNVC: 2
82-00756: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-189-8166
6 Fascetta 300X4

151898166
1925231: RNCC: 3 | RNVC: 2
(241)AA1361925231: RNCC: 5 | RNVC: 2

1 Mar 2010

5340-15-151-7092
Staffa

151517092
0-178396: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-154-6227
Base (1) Per Sosteg

151546227
157619106: RNCC: 2 | RNVC: 3

31 Jul 2001

5340-15-178-9964
Bracket Assembly

151789964
RS 407 355 -U: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-052-1961
Ammortizzatore

150521961
8-021-058: RNCC: 3 | RNVC: 2
8-021-058: RNCC: 5 | RNVC: 9
8-021-058: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-141-6854
Ammortizzatore

151416854
A11XC2C2: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-103-0929
Resilient Mount

151030929
TP81011: RNCC: 3 | RNVC: 2
(241)A5015040.20.014: RNCC: 5 | RNVC: 2
040.20.014: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-175-8298
Serratura A Pompa C

151758298
3250PDX: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-138-5732
Cerniera

151385732
7826376: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-119-5415
Premiguarnizione Sp

151195415
D0487614: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-142-9322
Per B Telaio Guida

151429322
2-7-0418: RNCC: 3 | RNVC: 2

30 Oct 1996

5340-15-114-7583
Indicator

151147583
01TL20448-02: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-222-0618
Serratura Per Fasce

152220618
0960/380: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-9372
Supporto

151159372
8241.02.02: RNCC: 3 | RNVC: 2

8 Oct 1993

5340-15-213-9582
Cerniera Pesante Po

152139582
2POLLICI: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-170-8384
Cover Plate

151708384
343-0322/01.02: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-166-5250
Kit-Stringitubo Dia

151665250
1902847: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-150-4377
Turnbuckle

151504377
1575 M0505: RNCC: 3 | RNVC: 2

30 Nov 1999

5340-15-203-8582
Maniglia Finestra

152038582
OMP-MLM-020: RNCC: 3 | RNVC: 2
(241)AE591OMP-MLM-020: RNCC: 5 | RNVC: 2

7 Jul 2011

5340-15-110-3444
Collier

151103444
55.18B.17: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-117-7175
Control Rod

151177175
1P 288166: RNCC: 3 | RNVC: 2
1P 288166: RNCC: 5 | RNVC: 9

23 Jan 1995

5340-15-053-5930
Fermo Piolo

150535930
45-1715-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-154-8572
Protective Dust Cap

151548572
836600/20: RNCC: 3 | RNVC: 2

24 Oct 2001

5340-15-006-2563
Guida Speciale

150062563
0-28884: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-062-5348
Anchor Strap

150625348
074029 X: RNCC: 3 | RNVC: 2

1 May 1977

5340-15-101-7823
Fascetta Speciale

151017823
SC32674.72S: RNCC: 3 | RNVC: 2

21 Jul 1987

5340-15-153-7240
Rubber Bumper

151537240
142025246: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-218-2280
Scovolo Abrasivo Mm

152182280
1315SA-MM19: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-105-6005
Staffa A Gomito

151056005
V.1121: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-172-6224
Serratura Marca Cis

151726224
SERRATURA MARCA CISA MOD.50111.5: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-152-4843
Piastrina Di Sic.8

151524843
17796711: RNCC: 3 | RNVC: 2

19 Sep 2000

5340-15-203-1948
Handle

152031948
12HJ04343435S01-433/4: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-142-6185
Cappuccio Rame

151426185
7560/4: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-166-5205
Cilindro Iseo In Ot

151665205
8200283361C: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-159-4725
Padlock

151594725
PN UAS 00010038: RNCC: 3 | RNVC: 2
9999F76005678: RNCC: 5 | RNVC: 9

31 Mar 2004

5340-15-119-5434
Fondello Cilindro

151195434
D0484490: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-166-4755
Fascetta

151664755
V28684: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-106-3224
Staffa

151063224
4551080: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-000-7273
Dust And Moisture Seal Protective Plug

150007273
BRP-5030633: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-145-1816
Fork

151451816
518-03-1460: RNCC: 3 | RNVC: 2

2 Jun 1997

5340-15-153-7071
Base (1) Per Sosteg

151537071
142014100: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-115-3410
Support

151153410
740-8676-047: RNCC: 3 | RNVC: 2
82-01519: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-074-4336
Turnbuckle

150744336
2B39UNI2020AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-139-7791
Cinghia Fissaggio

151397791
1000306: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-202-5279
Cuffia

152025279
MC252402: RNCC: 3 | RNVC: 2
(241)A4254MC252402: RNCC: 5 | RNVC: 2

29 Apr 2007

5340-15-211-8771
Panno Expolppp H.1M

152118771
3543: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-061-2969
Rim Clen Clamp (1)

150612969
L304C4: RNCC: 5 | RNVC: 2
L304C4: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-212-0442
Contropiastra In Al

152120442
875.02.15.0: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-005-6924
Piastrina Speciale

150056924
0-33811: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-109-5878
Supportotubolatura

151095878
11610025A: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-213-8240
Kit Standard Placca

152138240
2275NOR: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-207-4111
Key Blank

152074111
CS144: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-180-9369
Angle Bracket

151809369
109-0640-03-89: RNCC: 3 | RNVC: 2
(241)A0126109-0640-03-89: RNCC: 5 | RNVC: 2

22 Aug 2008

5340-15-179-1821
Padlock

151791821
576.7: RNCC: 3 | RNVC: 2

13 Jun 2006

5340-15-115-7008
Pomello

151157008
D0469778: RNCC: 3 | RNVC: 2

10 Mar 1994

5340-15-166-4763
Cerni Intermediario

151664763
13892101: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-005-6156
Ghiera Speciale

150056156
0-15858: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-178-9944
Hinge Block Assembl

151789944
RS 404 816 -X: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-147-5165
Sede Deposito

151475165
31803-001: RNCC: 5 | RNVC: 2
31803-001: RNCC: 5 | RNVC: 9
31803-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-213-3235
Serratura Di Ricamb

152133235
S14: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-145-2525
Case Assembly W. Cl

151452525
8087135: RNCC: 5 | RNVC: 2
8087135: RNCC: 5 | RNVC: 9

23 Jun 1997

5340-15-054-3272
Piastrina Sicurezza

150543272
523223: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-116-6531
Threaded End Tensioning Tie Rod

151166531
275A0313-001: RNCC: 3 | RNVC: 2

9 Jun 1993

5340-15-179-7023
Arm

151797023
00185978: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-221-8227
Lucchetto Antiscass

152218227
LUCCHETTOANTISCASSO90MM.: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-116-8542
Gruppo Leve Per Tir

151168542
D1302137: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-149-2211
Fork

151492211
106331: RNCC: 3 | RNVC: 2

23 Dec 1998

5340-15-198-3276
Corrosion Preventive Anode

151983276
DN40DC44.5: RNCC: 3 | RNVC: 2

22 Sep 2004

5340-15-206-2804
Utility Resilient Mount

152062804
224503F91: RNCC: 3 | RNVC: 2
VZA-R-AVU-2000: RNCC: 3 | RNVC: 2

1 Jun 2012

5340-15-232-9079
Mensola Mobile

152329079
800.0022/1: RNCC: 3 | RNVC: 2
534015E074565: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-153-7674
Base (1) Per Sosteg

151537674
01831H10971A: RNCC: 5 | RNVC: 2
T0063660: RNCC: 5 | RNVC: 2
01831H10971A: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-156-3856
Seal Extractor Assy

151563856
(241)A3460CBD71354G01: RNCC: 3 | RNVC: 2
CBD71354G01: RNCC: 3 | RNVC: 2

5 Feb 2003

5340-15-207-4733
Threaded Rod

152074733
N632U1047201: RNCC: 3 | RNVC: 2
(241)A0126N632U1047201: RNCC: 5 | RNVC: 2

16 Oct 2012

5340-15-151-7554
Hinge

151517554
J52850251-002: RNCC: 3 | RNVC: 2

5 Jul 2000

5340-15-204-2353
Turnbuckle

152042353
C06-00056: RNCC: 3 | RNVC: 2
(241)A7904C06-00056: RNCC: 5 | RNVC: 2

6 Oct 2011

5340-15-064-2024
Electronic Equipment Hardware Kit

150642024
RV4/AR76 INST: RNCC: 3 | RNVC: 2

23 Jan 1984

5340-15-172-0574
Lucchetto Corazzato

151720574
LUCCHETTO CORAZZATO DA MM.90 YAL: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-198-3280
Corrosion Preventive Anode

151983280
DN100DC108: RNCC: 3 | RNVC: 2

22 Sep 2004

5340-15-143-1009
Mensola A Doppio An

151431009
99991129: RNCC: 3 | RNVC: 2

22 Nov 1996

5340-15-111-5746
Adapter Cou

151115746
AC120570-1/1-14: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-202-0502
Kit Maniglia Ad Arc

152020502
C24M7400A-O: RNCC: 3 | RNVC: 2
(241)SH469C24M7400A-O: RNCC: 5 | RNVC: 2

25 Jan 2007

5340-15-049-4265
Staffetta

150494265
T98165-1-1: RNCC: 3 | RNVC: 2

10 Apr 1970

5340-15-124-4003
Gancio Per Sponda L

151244003
128805: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-211-4841
Aggancio Registrabi

152114841
325/F: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-135-4720
Plug (Tappo)

151354720
200551-0: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-002-1358
Angle Bracket

150021358
5801458278: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-177-5748
Handwheel

151775748
VC192/50P-M10X30: RNCC: 3 | RNVC: 2

13 May 2004

5340-15-054-5885
Turnbuckle Body

150545885
H34DB3: RNCC: 5 | RNVC: 2
H34DB3: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-134-2551
Riscaldat Tassello

151342551
9915174: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-179-3895
Filter Support

151793895
200052: RNCC: 3 | RNVC: 2

28 Nov 2006

5340-15-179-4782
Wheel

151794782
873-4012-162: RNCC: 3 | RNVC: 2
M0016973: RNCC: 5 | RNVC: 2

22 Jan 2007

5340-15-157-8967
Access Door

151578967
0-113937: RNCC: 3 | RNVC: 2
(241)A39630-113937: RNCC: 5 | RNVC: 2
1PA39630-113937: RNCC: 5 | RNVC: 2

20 Nov 2003

5340-15-112-1140
Resilient Mount

151121140
MM30: RNCC: 3 | RNVC: 2
(241)A3290MM30: RNCC: 5 | RNVC: 2

1 Jan 1994

5340-15-150-1076
Barrette Ext

151501076
120015416: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-156-2629
Resilient Mount

151562629
0550066: RNCC: 3 | RNVC: 2
(241)A97720550066: RNCC: 5 | RNVC: 2

19 Dec 2002

5340-15-231-5698
Transizione

152315698
534015E093118: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-157-0337
Speciale Cerniera

151570337
525CR: RNCC: 3 | RNVC: 2
525CR: RNCC: 5 | RNVC: 2
(241)A3238525CR: RNCC: 5 | RNVC: 2

10 Apr 2003

5340-15-148-9074
Flangia Manicotto S

151489074
4786965: RNCC: 3 | RNVC: 2

27 Oct 1998

5340-15-213-8886
Fermaporta A Pedale

152138886
2441IBFM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-163-1224
Support

151631224
1300466080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-215-6977
Filo Zincato

152156977
MM2ZINC: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-117-0628
Barre Prot. Siege

151170628
79009070: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-006-2729
Piastra Speciale

150062729
0-12401: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-062-4095
Nut And Bolt Locking Plate

150624095
749625 J: RNCC: 3 | RNVC: 2

1 Apr 1998

5340-15-102-3316
Bracket

151023316
NS4F001-1: RNCC: 3 | RNVC: 2
NS4F001-1: RNCC: 5 | RNVC: 9

19 Jul 1988

5340-15-206-2563
Dust And Moisture Seal Protective Cap

152062563
SPLT13302: RNCC: 3 | RNVC: 2
SPLT13302: RNCC: 5 | RNVC: 2

1 Jun 2012

5340-15-105-0312
Arresto A Cricchett

151050312
750/24: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-5477
Shock Mount Pad

151185477
D0475440: RNCC: 3 | RNVC: 2

10 Jan 1995

5340-15-114-7507
Handle

151147507
01TC20859-03: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-151-7787
Window Regulator Handle

151517787
0-110311: RNCC: 3 | RNVC: 2

10 Jul 2000

5340-15-057-5928
Buckle

150575928
6273: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-127-6729
Anello

151276729
970770: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-125-1023
Coperchio

151251023
261522P1: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-103-1591
Sottogruppo Support

151031591
DE004.01.483: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-002-8041
Lock-Release Lever

150028041
890.0014.0: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-064-9127
Resilient Mount Plate

150649127
1807010: RNCC: 3 | RNVC: 2

19 Jun 1984

5340-15-154-0091
Dust And Moisture Seal Protective Plug

151540091
58406A008004: RNCC: 5 | RNVC: 2
58406A008004: RNCC: 5 | RNVC: 9

15 Mar 2001

5340-15-150-0952
Manual Control Handle

151500952
048095116: RNCC: 3 | RNVC: 2

29 Jul 1999

5340-15-163-2922
Volls Schelle

151632922
3617.178: RNCC: 3 | RNVC: 2

12 Aug 2002

5340-15-163-4887
Nonmetallic Bumper

151634887
048261: RNCC: 3 | RNVC: 2

24 Sep 2002

5340-15-166-4904
Piedino

151664904
SL200001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-006-2558
Guida Speciale

150062558
0-28887: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-005-5409
Strap Assy

150055409
S6132-80170-001: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-045-2963
Latch Assy

150452963
N0R2-423-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-163-0030
Access Door

151630030
RS 422 389 AE: RNCC: 3 | RNVC: 2

16 Apr 2002

5340-15-174-7443
Esag.Inox17 Aisi303

151747443
51260-12/015: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-065-6859
Rh Latch Assy

150656859
P884036-404: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-163-1070
Manual Control Handle

151631070
13C-291A07200-007-101: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-009-4489
Rim Clen Clamp (1)

150094489
L304BB: RNCC: 5 | RNVC: 2
L304BB: RNCC: 5 | RNVC: 9

21 Jun 1980

5340-15-213-4405
Fascetta Stringic.

152134405
4/11668: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-237-3191
Gancio

152373191
323176: RNCC: 3 | RNVC: 2
534015E132830: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-153-5248
Coperchio E Guarniz

151535248
142079929: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-062-8560
Fascetta Speciale

150628560
0-08399: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-212-5417
Portabagaglio

152125417
F-50900908: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-122-2853
Caoutchouc Selecteu

151222853
800066463: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-231-1638
Tampone

152311638
7631247: RNCC: 3 | RNVC: 2
534015E093424: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-137-1174
Cerniera

151371174
47-382-127-5: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-109-3511
Occhionecompleto

151093511
OP-06.10: RNCC: 3 | RNVC: 2

16 Oct 1989

5340-15-118-0468
Attacco A Cilindro

151180468
D0487622: RNCC: 3 | RNVC: 2

18 Nov 1994

5340-15-125-3190
Serratura A Chiave

151253190
46445: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-207-2102
Helical Compression Spring Seat

152072102
1P 346667LA: RNCC: 3 | RNVC: 9
1P 346667LA: RNCC: 5 | RNVC: 9

24 Sep 2012

5340-15-201-0415
Coperchio Di Protez

152010415
N632U6020201: RNCC: 3 | RNVC: 2
(241)A0126N632U6020201: RNCC: 5 | RNVC: 2

15 May 2006

5340-15-120-6816
Cilindro Coperchio

151206816
D0487306: RNCC: 3 | RNVC: 2

3 Jul 1996

5340-15-163-2319
Clip

151632319
12172890: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-026-7798

5340-15-157-4205
Pattino Di Metallo

151574205
21505706: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-222-2283
Piastre Fissaggio

152222283
S1-72E: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-220-0482
Turning Vanes 1973

152200482
S1-94: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-204-8619
Tampone Ammortizzat

152048619
ATA373-DB3621-I03836: RNCC: 3 | RNVC: 2
ATA373-DB3621-I03836: RNCC: 3 | RNVC: 2
(241)AD751ATA373-DB3621-I03836: RNCC: 5 | RNVC: 2

19 Jan 2012

5340-15-051-3660
Fermaglio

150513660
895994: RNCC: 3 | RNVC: 2
895994: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-120-6842
Supporto Destro Man

151206842
D0486602: RNCC: 3 | RNVC: 2

1 May 1996

5340-15-156-3583
Dust Protective Cap

151563583
CBD71077P01: RNCC: 3 | RNVC: 2
(241)A3460CBD71077P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-119-7418
Tow Eyelet

151197418
01TL23300: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-122-2015
Guide D Extremite

151222015
SE40: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-007-0897
Leva Speciale

150070897
0-21750: RNCC: 3 | RNVC: 2

29 Jun 1979

5340-15-193-7321
Pressacavo

151937321
PG 13,5/4: RNCC: 3 | RNVC: 2
PG 13,5/4: RNCC: 5 | RNVC: 2
(241)AJ035PG13,5/4: RNCC: 5 | RNVC: 2

5 Jul 2010

5340-15-158-3915
Astuccio Per Tirant

151583915
1Q 532949: RNCC: 3 | RNVC: 2

25 Jan 2004

5340-15-198-8527
Manicotto Sacrifica

151988527
58529000247D: RNCC: 3 | RNVC: 2
(241)A312158529000247D: RNCC: 5 | RNVC: 2

22 Nov 2004

5340-15-209-0188
Insert

152090188
768-7152-001: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-154-8841
Rubber Bumper

151548841
45-G-60: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-15-193-4681
Base Antivibrante P

151934681
E6148.0000: RNCC: 3 | RNVC: 2

17 May 2010

5340-15-001-8499
Unavailable

150018499
ED00613R0910-S: RNCC: 3 | RNVC: 2

16 Jul 2013

5340-15-127-6767
Molla Rinvio Leva C

151276767
4048656: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-042-5025
Collare Speciale

150425025
7121-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-166-4783
Stop A Gancio Da Mm

151664783
SB128: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-231-5714
Viteria E Bulloneri

152315714
534015E138166: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-005-6867
Scodellino Speciale

150056867
0-33676: RNCC: 3 | RNVC: 2

12 Aug 1979

5340-15-006-2543
Raschiatore Special

150062543
0-33760: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-007-3939
Tappo Speciale

150073939
1-5121182: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-000-4693
Colonna Di Estensio

150004693
CMS0203: RNCC: 3 | RNVC: 2

7 Mar 2013

5340-15-207-3883
Double Angle Bracket

152073883
DV 2345-268: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-151-1325
Rotolo Bandella

151511325
5055/2: RNCC: 3 | RNVC: 2

20 Apr 2000

5340-15-149-5214
Stand Base (1)

151495214
112710602: RNCC: 3 | RNVC: 2

31 Jan 2000

5340-15-206-9186
Coupling Damper

152069186
129-8101-63-107: RNCC: 3 | RNVC: 2
(241)A0126129-8101-63-107: RNCC: 5 | RNVC: 2

26 Jul 2012

5340-15-213-8817
Coppia Scrocchi In

152138817
941-020-35-04: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-000-7228
Lock-Release Lever

150007228
BRP-0326225: RNCC: 3 | RNVC: 2

3 Apr 2013

5340-15-162-5582
Spacing Threaded Standoff

151625582
RAK-0376/01: RNCC: 5 | RNVC: 2
RAK-0376/01: RNCC: 5 | RNVC: 9

16 Oct 2001

5340-15-066-4319
Nut And Bolt Locking Plate

150664319
68-702006-003: RNCC: 3 | RNVC: 2

12 Dec 1984

5340-15-100-6314
Spec Ammortizzatore

151006314
CB1400-20-04: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-198-7810
Electrical-Me Post

151987810
C68644: RNCC: 3 | RNVC: 2

17 Nov 2004

5340-15-007-3480
Flangia Speciale

150073480
0-31505: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-067-3365
Anodo Protettivo

150673365
DIAM.29MM.LUN.104,5MM.FILET.20: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-106-2550
Sostegno El Piastra

151062550
4641875: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-195-5585
Maniglia Cap

151955585
V38951.00: RNCC: 3 | RNVC: 2
(241)A4447V38951.00: RNCC: 5 | RNVC: 2

6 Apr 2011

5340-15-060-2300
Support

150602300
18257-1: RNCC: 3 | RNVC: 2

4 Dec 1976

5340-15-120-4583
Supportomensolaspec

151204583
145369-1: RNCC: 3 | RNVC: 2

29 May 1995

5340-15-112-8439
Coperchios

151128439
469729: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-119-9805
Threaded End Tensioning Tie Rod

151199805
78436F01: RNCC: 3 | RNVC: 2
78436F01: RNCC: 5 | RNVC: 9

28 May 1996

5340-15-120-0871
Double Angle Bracket

151200871
60165712: RNCC: 3 | RNVC: 2

19 Dec 1994

5340-15-185-5766
Selettore A Chiave

151855766
541010: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-020-2146
Staffa

150202146
01-231M24: RNCC: 3 | RNVC: 2
55.29.031.A: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-122-5562
Rear W Hub

151225562
01TL21300: RNCC: 3 | RNVC: 2

3 Sep 1996

5340-15-121-6240
Tampon Caoutchouc

151216240
800020007: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-060-1854
Piastra Cerniera Sp

150601854
98911-502: RNCC: 3 | RNVC: 2

16 Dec 1976

5340-15-009-6405
Inserto Filettato S

150096405
1143069: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-054-6560
Snap Hook

150546560
AF106-07E12-6: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-040-2552
Piastrina Di Spesso

150402552
2-5851-113-26736-1: RNCC: 3 | RNVC: 2
2-5851-1-13-26736-1: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-151-4268
Staffa

151514268
0-112035: RNCC: 3 | RNVC: 2
00112035: RNCC: 3 | RNVC: 2
(241)A39630-112035: RNCC: 5 | RNVC: 2
1PA39630-112035: RNCC: 5 | RNVC: 2

24 May 2000

5340-15-064-6668
Scodellino Sede Mol

150646668
72-052-110: RNCC: 3 | RNVC: 2
72-052-110: RNCC: 5 | RNVC: 9

30 Jul 1984

5340-15-110-2809
Bracket Ass

151102809
P120198-401: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-178-9410
Utility Resilient Mount

151789410
141801101504: RNCC: 3 | RNVC: 2

10 Feb 2006

5340-15-177-3787
Manual Control Lever

151773787
030354: RNCC: 3 | RNVC: 2

2 Mar 2004

5340-15-176-1904
Cilindro Sagomato

151761904
60/2: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-153-5995
Base (1) Per Sosteg

151535995
142018264: RNCC: 3 | RNVC: 2

16 Feb 2001

5340-15-151-6911
Cerniera

151516911
0-102191: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-153-7678
Base (1) Per Sosteg

151537678
01900A104840: RNCC: 5 | RNVC: 2
T0064953: RNCC: 5 | RNVC: 2
01900A104840: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-166-5195
Confezione Da N.100

151665195
017711001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-163-1208
Filter Tube

151631208
1300686080: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-159-8930
Loop Clamp Kit

151598930
A6260: RNCC: 3 | RNVC: 2

7 Apr 2004

5340-15-166-5006
Supporto Attuatore

151665006
LS77342021: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-142-5177
Anodo Anticorrosion

151425177
A045407X30: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-189-6475
Serratura Elettrica

151896475
11721-60-2: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-101-2940
Speciale Rullino

151012940
677659-A: RNCC: 3 | RNVC: 2

24 Jul 1986

5340-15-005-5251
Padlock

150055251
302: RNCC: 3 | RNVC: 2

20 Nov 1978

5340-15-005-0514
Dust And Moisture Seal Protective Cap-Plug

150050514
0-28150: RNCC: 3 | RNVC: 2

7 Sep 1977

5340-15-102-2478
Handwheel

151022478
30126: RNCC: 5 | RNVC: 2
30126: RNCC: 5 | RNVC: 9
30126: RNCC: 5 | RNVC: 9

27 Oct 1988

5340-15-201-2959
Control Rod

152012959
122611629: RNCC: 3 | RNVC: 2

20 Jul 2006

5340-15-000-9979
Staffetta Porta Con

150009979
006A5457-001: RNCC: 3 | RNVC: 2

8 May 2013

5340-15-078-0844
Morsetto

150780844
TM120-51-34: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-143-5352
Telaio

151435352
444: RNCC: 3 | RNVC: 2
542-147: RNCC: 3 | RNVC: 2

11 Dec 1996

5340-15-121-3203
Cover And Pad Assem

151213203
46834-002: RNCC: 5 | RNVC: 2
46834-002: RNCC: 5 | RNVC: 9
46834-002: RNCC: 5 | RNVC: 9

7 Nov 1995

5340-15-232-9224
Impugnatura Piccola

152329224
3920-10002: RNCC: 3 | RNVC: 2
534015E119320: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-009-0911
Threaded End Tensioning Tie Rod

150090911
1026-04-230: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-002-8202
Escutcheon Plate

150028202
GFM03090A000: RNCC: 3 | RNVC: 2

3 Oct 2013

5340-15-102-8950
Helical Compression Spring Retainer

151028950
276174: RNCC: 2 | RNVC: 2
1P276174: RNCC: 3 | RNVC: 2
276174: RNCC: 5 | RNVC: 9
1P276174: RNCC: 5 | RNVC: 9

1 Jan 1994

5340-15-178-4986
Dust And Moisture Seal Protective Cap

151784986
308188: RNCC: 3 | RNVC: 2

1 Jul 2005

5340-15-190-6469
Hinge Pin

151906469
748468-1: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-068-2302
Anchor Strap

150682302
W011591: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-074-4010
Turnbuckle

150744010
1A10UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-196-6309
Padlock

151966309
PN UAS 00046853: RNCC: 3 | RNVC: 2
5340F76038583: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-112-8348
Control Rod

151128348
470483: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-200-7757
Access Door Locking Ring

152007757
70079919: RNCC: 3 | RNVC: 2
(241)A00I570079919: RNCC: 5 | RNVC: 9
70079919: RNCC: 5 | RNVC: 9

26 Feb 2006

5340-15-147-0322
Perno Per Porta A S

151470322
2509POS.20: RNCC: 3 | RNVC: 2

18 Aug 1997

5340-15-151-6963
Piastra

151516963
0-179421: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-152-7350
Shock Mount Pad

151527350
12111: RNCC: 3 | RNVC: 2
(241)A333412111: RNCC: 4 | RNVC: 1
2211T1: RNCC: 5 | RNVC: 2

19 Oct 2000

5340-15-103-1967
Complessiv Supporto

151031967
DE013.13.419: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-183-0596
Serratura Meroniscr

151830596
TB60-15: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-045-3843
Distanziale

150453843
781-12-10-18: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-182-4756
Pacco Ganci Zincati

151824756
GANCIOZINCATO: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-115-5448
Coperchietto Lato

151155448
D0469158: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-115-3038
Compression Pin

151153038
19.08.60.20: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-188-6803
Stand Base

151886803
157667466: RNCC: 3 | RNVC: 2
(241)A0199157667466: RNCC: 5 | RNVC: 2

21 Oct 2009

5340-15-119-7417
Eyebolt Lif

151197417
01TL23281: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-115-5409
Control Rod

151155409
D0471900: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-066-7587
Supporto Antivibran

150667587
371148: RNCC: 2 | RNVC: 2

21 May 1996

5340-15-151-4151
Dust And Moisture Seal Boot

151514151
0-103731: RNCC: 3 | RNVC: 2

23 May 2000

5340-15-068-8401
Attacco A Cerniera

150688401
13750-901: RNCC: 5 | RNVC: 2
13750-901: RNCC: 5 | RNVC: 9

9 Oct 1986

5340-15-148-6692
Screw Threa Insert

151486692
M10X(1,5)X1D: RNCC: 3 | RNVC: 2
210002509: RNCC: 5 | RNVC: 2

17 Sep 1998

5340-15-134-3729
Mezza Cerniera Inte

151343729
04151-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-147-5741
Support Assembly Lh

151475741
SF260-18-140-01: RNCC: 5 | RNVC: 2
SF260-18-140-01: RNCC: 5 | RNVC: 9

30 Dec 1997

5340-15-170-8198
Support Plate

151708198
340-1005/06.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-061-2681
Electrical-Me Post

150612681
000200100500: RNCC: 5 | RNVC: 2
1200096-111331002: RNCC: 5 | RNVC: 2
000200100500: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-148-7496
Assieme Sede

151487496
2103-0040-001: RNCC: 3 | RNVC: 2

30 Sep 1998

5340-15-154-0301
Dust And Moisture Seal Protective Plug

151540301
0093192919: RNCC: 3 | RNVC: 2
(241)A39630-116333: RNCC: 5 | RNVC: 2
0-116333: RNCC: 5 | RNVC: 2
1PA39630-116333: RNCC: 5 | RNVC: 2

15 Mar 2001

5340-15-136-2658
Staffa

151362658
4279495: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-187-2296
Pannello Bugnato

151872296
A6164: RNCC: 3 | RNVC: 2
(241)A7904A6164: RNCC: 5 | RNVC: 2

26 Feb 2009

5340-15-064-7667
Rubber Bumper

150647667
65.57.39.00: RNCC: 3 | RNVC: 2

26 Dec 1983

5340-15-124-1715
Tappo Dinamometro

151241715
16P50NSS: RNCC: 3 | RNVC: 2
16P50NSS: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-154-7339
Piattello In Acciai

151547339
C68788: RNCC: 3 | RNVC: 2

13 Sep 2001

5340-15-129-0473
Circlip

151290473
16T3623N4: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-156-8383
Rubber Bumper

151568383
TIPO 20: RNCC: 3 | RNVC: 2

7 Mar 2000

5340-15-114-7700
Holder

151147700
X446E11: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-185-4663
Tasselli A Calza Fi

151854663
16X85: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-166-4898
Sonda Tirafili Con

151664898
GW52404: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-4878
Padlock

151664878
3243740X34: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-004-4928
Double Angle Bracket

150044928
ST12856-3: RNCC: 3 | RNVC: 2
ST12804: RNCC: 5 | RNVC: 2

31 Jan 1978

5340-15-068-6396
Handwheel

150686396
W 010941: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-153-8096
Base (1) Per Sosteg

151538096
01100A114960: RNCC: 5 | RNVC: 3
01100A114960: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-105-8511
Double Angle Bracket

151058511
002.9357.2: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-118-6414
Activating Bar

151186414
155L3001: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-105-5955
Staffa A Gomito

151055955
845248: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-124-8109
Scontro

151248109
6449: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-020-2188
Ponticello Ancoragg

150202188
01-231M66: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-174-6575
Disc Blocking Ring

151746575
6110611510: RNCC: 3 | RNVC: 2

29 Jul 2003

5340-15-149-2646
S Assieme Fondello

151492646
28032-9: RNCC: 3 | RNVC: 2
28032-9: RNCC: 5 | RNVC: 9

26 Jan 1999

5340-15-108-9100
Staffa

151089100
23352-101: RNCC: 3 | RNVC: 2

4 Sep 1989

5340-15-116-9753
Exploder

151169753
W018370: RNCC: 3 | RNVC: 2

28 Jul 1993

5340-15-181-5560
Chiusura In Ferro M

151815560
CHIUSURA50X40: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-007-2770
Staffa A Gomito

150072770
1388677: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-054-5805
Turnbuckle Body

150545805
H34DF19: RNCC: 5 | RNVC: 2
H34DF19: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-183-4423
Contrafforte Elettr

151834423
CONTRAFFORTE: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-150-9329
Turnbuckle

151509329
795.858.13: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-15-101-3734
Serie Alette

151013734
6156-4: RNCC: 3 | RNVC: 2

13 Jun 1994

5340-15-198-3985
Morsetto Di Protezi

151983985
M2VAM90S/9: RNCC: 3 | RNVC: 2
(241)A5205M2VAM90S/9: RNCC: 5 | RNVC: 2

24 Sep 2004

5340-15-233-0448
Ruota Con Piastra G

152330448
90/ALFA: RNCC: 3 | RNVC: 2
534015E060196: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-207-1080
A Rear Lifting Arm

152071080
N710U3016101: RNCC: 3 | RNVC: 2
(241)A0126N710U3016101: RNCC: 5 | RNVC: 2

4 Sep 2012

5340-15-153-3013
Base (1) Per Sosteg

151533013
122603416: RNCC: 2 | RNVC: 3

13 Dec 2000

5340-15-179-6551
Bag

151796551
873-5800-367: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-100-5030
Semi Cerniera A Nas

151005030
100900325000: RNCC: 5 | RNVC: 2
100900325000: RNCC: 5 | RNVC: 9

22 Apr 1987

5340-15-153-7685
Base (1) Per Sosteg

151537685
01900A115260: RNCC: 5 | RNVC: 2
01900A115260: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-145-2746
Retaining Bar

151452746
D7441-0000: RNCC: 5 | RNVC: 2
D7441-0000: RNCC: 5 | RNVC: 9

23 Jun 1997

5340-15-136-7820
Collare

151367820
412-060-005-101: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-052-9109
Fascetta

150529109
204-4610-36-1: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-137-3159
Spessore Laminato

151373159
S6121-60037-24: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-000-4768
Cover Boroscope

150004768
TP600630: RNCC: 3 | RNVC: 2

8 Mar 2013

5340-15-061-3803
Rullino

150613803
P26CA6: RNCC: 5 | RNVC: 2
P26CA6: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-003-4789
Forcella

150034789
974707: RNCC: 3 | RNVC: 2
974707: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-166-5038
Bracket

151665038
UA29004A06C: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-166-5127
Serratura Elettrica

151665127
CISA1: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-153-7684
Base (1) Per Sosteg

151537684
01900A114940: RNCC: 5 | RNVC: 2
01900A114940: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-108-4468
Completo Tirante

151084468
345A3346-401: RNCC: 3 | RNVC: 2

19 Jul 1989

5340-15-147-5810
Plug

151475810
98TA745: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-064-9217
Nut And Bolt Locking Plate

150649217
13341: RNCC: 3 | RNVC: 2

5 May 1984

5340-15-212-1998
Cerniera A Saldare

152121998
CERN-SALDARE: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-110-3965
Graffette

151103965
14183571: RNCC: 3 | RNVC: 2
14183571: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-007-2794
Fissaggio Gaffetta

150072794
1390883: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-166-5158
Rotella In Gomma

151665158
2270201: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-193-1342
Cover

151931342
00233R0840: RNCC: 3 | RNVC: 2
233 84: RNCC: 3 | RNVC: 2
233 84: RNCC: 5 | RNVC: 9

19 Apr 2010

5340-15-005-3158
Dust And Moisture Seal Protective Cap-Plug

150053158
0-08366: RNCC: 3 | RNVC: 2

7 Sep 1978

5340-15-186-3911
Stecche Marroni Per

151863911
MASTEC2M: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-180-8346
En Bracket Assembly

151808346
N714G1042101: RNCC: 3 | RNVC: 2
(241)A0126N714G1042101: RNCC: 5 | RNVC: 2

28 Jul 2008

5340-15-102-0341
Nonrotating Shaft Eye Bracket

151020341
0919T02: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-115-7025
Piatto

151157025
D1401112: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-074-4174
Turnbuckle

150744174
1A10UNI20190T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-136-2361
Bottone

151362361
4394802: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-101-7443
Piastra Non Forata

151017443
350X350X20DIS44125: RNCC: 3 | RNVC: 2

4 Feb 1994

5340-15-008-0220
Sadd Pipe Support

150080220
109-0512-22-4: RNCC: 3 | RNVC: 2

2 Sep 1981

5340-15-104-8900
Fissaggio Gaffetta

151048900
350/32: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-193-6809
Webbing Strap

151936809
163104936: RNCC: 3 | RNVC: 2
(241)A0199163104936: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-220-0529
Distanz. Travi Tubo

152200529
S1-113C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-182-6441
Pin

151826441
P-135207-005: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-157-9174
Double Angle Bracket

151579174
0-163753: RNCC: 3 | RNVC: 2
1PA39630-163753: RNCC: 5 | RNVC: 2
(241)A39630-163753: RNCC: 5 | RNVC: 2

24 Nov 2003

5340-15-066-5017
Impugnatura Special

150665017
C0040/R02: RNCC: 3 | RNVC: 2

1 Mar 1986

5340-15-232-9578
Tassello

152329578
58V: RNCC: 3 | RNVC: 2

19 Jul 2007

5340-15-138-4759
Tassello

151384759
5961037: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-192-1142
Shockabsorber

151921142
16903I: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-151-1907
Shock Mount Pad

151511907
UXGS0030200: RNCC: 3 | RNVC: 2

14 Apr 2000

5340-15-074-4112
Turnbuckle

150744112
1C72UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-212-3589
Serratura Orizzonta

152123589
CN97070: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-179-0028
Support

151790028
RS 412 138 B: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-008-0554
Threaded End Tensioning Tie Rod

150080554
1389701: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-153-9322
Speciale Lamiera

151539322
142024297: RNCC: 2 | RNVC: 3

12 Mar 2001

5340-15-136-4365
Fascetta

151364365
28314-901: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-051-3694
Tassello

150513694
AMG0M896427: RNCC: 3 | RNVC: 2
896427: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-120-6782
Supporto Scatola Pr

151206782
D0491820: RNCC: 3 | RNVC: 2

29 Jun 1996

5340-15-158-6522
Protezione

151586522
162516115: RNCC: 3 | RNVC: 2

12 Mar 2004

5340-15-175-0871
Pressure Relief Car

151750871
CMP.30.C.2.00.1: RNCC: 3 | RNVC: 2

29 Dec 2003

5340-15-154-1342
Tappo Di Protezione

151541342
93163352: RNCC: 3 | RNVC: 2
0093163352: RNCC: 3 | RNVC: 2
0-116253: RNCC: 5 | RNVC: 2

22 Mar 2001

5340-15-166-4912
Chiudiporta Aerei S

151664912
6055103: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-062-2650
Staffa Speciale

150622650
4-21816-002D: RNCC: 5 | RNVC: 2
4-21816-002D: RNCC: 5 | RNVC: 9

29 Jun 1981

5340-15-065-7792
Padlock

150657792
193-0462/19: RNCC: 3 | RNVC: 2

22 Mar 1985

5340-15-207-4457
Mechanic Equipment Hardware Kit

152074457
5835302131: RNCC: 3 | RNVC: 2

10 Oct 2012

5340-15-001-6017
Mechanic Equipment Hardware Kit

150016017
42566684: RNCC: 3 | RNVC: 2

12 Jul 2013

5340-15-008-2520
Fascetta Serbatoio

150082520
101-14-02: RNCC: 3 | RNVC: 2

1 Feb 1982

5340-15-220-0499
Telaio Supporto Bas

152200499
S1-28C: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-150-6674
Bracket Clamp Suppo

151506674
SF260-16-267-13: RNCC: 5 | RNVC: 2
SF260-16-267-13: RNCC: 5 | RNVC: 9

20 Dec 1999

5340-15-207-2016
Gommini

152072016
R0063256: RNCC: 2 | RNVC: 2
(241)AG350R0063256: RNCC: 5 | RNVC: 2

20 Sep 2012

5340-15-120-6790
Blocchetto Intercet

151206790
D0491786: RNCC: 3 | RNVC: 2

10 Jul 1996

5340-15-202-7822
Protect Blank Panel

152027822
N651U3127201: RNCC: 3 | RNVC: 2
(241)A0126N651U3127201: RNCC: 5 | RNVC: 2

10 Jul 2007

5340-15-155-1373
Resilient Mount

151551373
142068906: RNCC: 2 | RNVC: 3

18 Jan 2002

5340-15-138-7640
Sostegno Elastico

151387640
60573784: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-009-7040
Tratto Cartolina

150097040
181581G1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-153-5017
Half Hinge

151535017
J57140794-002: RNCC: 3 | RNVC: 2

5 Feb 2001

5340-15-105-2964
Poker

151052964
1500/IC/III-08.09.58-54: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-205-5928
Dust And Moisture Seal Protective Plug

152055928
60169952: RNCC: 3 | RNVC: 2
(241)A424960169952: RNCC: 5 | RNVC: 2

21 Mar 2012

5340-15-007-9421
Helical Compression Spring Seat

150079421
4053044: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-007-9984
Helical Compression Spring Seat

150079984
767770: RNCC: 3 | RNVC: 2
767770: RNCC: 5 | RNVC: 2

22 Sep 1979

5340-15-007-1964
Nut And Bolt Locking Plate

150071964
1390503: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-152-3358
Access Door

151523358
0-163645: RNCC: 3 | RNVC: 2

31 Aug 2000

5340-15-123-7055
Raccordo Maschio

151237055
1620G/6,3: RNCC: 3 | RNVC: 2

8 Oct 1996

Load More Results