What is Federal Supply Class 5340?

FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.

What is NATO Supply Classification Class 5340?

NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.

Which Federal Supply Group is FSC 5340 in?

FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.

Which NATO Supply Classification Group is NSC 5340 in?

NSC 5340is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

What is a Turnbuckle?

A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.

What is a Retaining Clip?

A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.

What is a Rod End Connector?

A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.

What is a Coat And Hat Hook?

A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.

What is a Rod End Clevis?

A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.

What is an Expansion Plug?

An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.

What is a Metal Grille?

A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.

What is a Luggage Handle?

A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.

What is a Retaining Strap?

A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.

What is a Swivel Caster?

A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.

What is a Shelf Bracket?

A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.

What is a Corner Brace?

A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.

A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.

What is a Friction Catch?

A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.

A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.

What is a Flush Lock?

A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.

A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.

What is a Door Closer?

A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.

What is a Mortise Lock Set?

A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.

What is a Strap Hinge?

A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.

What is a Butt Hinge Leaf?

A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.

A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.

What is a Rim Lock Set?

A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.

What is an Expansion Shield?

An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.

What is a Mending Plate?

A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.

What is a Bridge Clamp?

A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.

What is a Plug Button?

A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.

What is a Drift Bolt?

A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.

What is a Corrosion Preventive Anode?

A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.

A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.

What is a Dust And Moisture Seal Protective Cap?

A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Plug?

A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.

What is a Dust And Moisture Seal Protective Cap-Plug?

A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).

What is a Handle Grip?

A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.

What is a Blank Panel?

A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.

What is a Support Hook?

A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.

A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.

What is a Nut And Bolt Retainer?

A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.

What is a Plain Solid Disk?

A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.

What is an Angle Bracket?

An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.

An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.

A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.

A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.

What is a Loop Clamp?

A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.

What is a Hand Crank?

A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.

What is a Door Handle?

A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.

What is a Dust And Moisture Seal Boot?

A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.

Hardware, Commercial - Italy (IT)

Federal Supply Class (FSC): 5340

NATO Supply Classification Class (NSC): 5340

Federal Supply Group (FSG): 53 Hardware and Abrasives

NATO Supply Classification Group (NSG): 53 Hardware and Abrasives

Items Managed by Italy (IT) - NCB is 15

Page 52 of 72

NSN Format for Hardware, Commercial
Codified by Italy

53	40	15	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5340 is a classification for Hardware, Commercial within NATO Supply Group 53 for Hardware And Abrasives.

Hardware refers to various physical components, devices, or equipment used in different industries and applications. This can include items such as fasteners, fittings, valves, hinges, locks, and other similar products.

Commercial hardware specifically refers to hardware items that are commercially available and commonly used in various industries. These items are typically produced by manufacturers and are readily accessible for purchase in the commercial market.

NATO Supply Group 53, which includes Hardware And Abrasives, encompasses a wide range of products used in military and civilian applications. This group includes items such as tools, hardware, abrasives, and other related materials.

In summary, NATO Supply Class 5340 for Hardware, Commercial falls under NATO Supply Group 53 for Hardware And Abrasives and refers to commercially available hardware items used in various industries.

FSC 5340 Hardware, Commercial - Italy (IT)

Includes Access Covers; Bumpers; Casters; Cabinet and Door Hardware; Clevises; Hinges; Latches; Straps and Strapping; Turnbuckles; Webbed Straps.

Excludes Weapons System Hardware (FSC 5342).

Frequently Asked Questions(FAQ) for Federal Supply Class 5340

What is Federal Supply Class 5340?: FSC 5340 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5340) in the USA for supply items codified in the category of Hardware, Commercial.
What is NATO Supply Classification Class 5340?: NSC 5340 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5340 in the USA) for supply items codified in the category of Hardware, Commercial.
Which Federal Supply Group is FSC 5340 in?: FSC 5340 is in Federal Supply Group (FSG) 53 which contains Hardware and Abrasives.
Which NATO Supply Classification Group is NSC 5340 in?: NSC 5340 is in NATO Supply Classification Group (NSG) 53 which contains Hardware and Abrasives.

Supply Items Included in Federal Supply Class 5340

What is a Turnbuckle? 633 Items: A Turnbuckle is a metal loop, sleeve, or solid body with end pulls, having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one end and left hand screw threads on the other. It may include lock nuts, check nuts, jam nuts, and/or terminal attachment(s) such as hooks, rings, and the like. It is designed to regulate the distance (take-up) between two points by turning. See also PELICAN HOOK AND TURNBUCKLE ASSEMBLY; and TIE ROD, TENSIONING, THREADED END.
What is a Retaining Clip? 81 Items: A Retaining Clip (CLIP,RETAINING) is a clip formed from resilient wire stock into a shape resembling the letter U, with each of the prongs having one or more curvatures along its length. It is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. See also PIN, LOCK; RING, RETAINING and CLIP, SPRING TENSION. For items specifically designed for aviaton, see CLIP(1), RETAINING, AVIATION.
Base,Stand 128 Items
Holder,Spring 92 Items
What is a Rod End Connector? 77 Items: A Rod End Connector (CONNECTOR,ROD END) is an item which has one end designed to form a rigid connection on a rod, shaft, turnbuckle or the like by means of welding, threading and/or pinning. The opposite end provides a hinged or semirigid method of fastening or attaching to another part by means of a protruding tongue or block. May include provisions for locking. See also CLEVIS, ROD END and ROD END, THREADED. For items specifically designed for aviation, see CONNECTOR, ROD END, AVIATION.
What is a Coat And Hat Hook? 130 Items: A Coat And Hat Hook (HOOK,COAT AND HAT) is a curved or sharply bent item. It is attached to another item such as a coat stand or rack. It is designed to hold a hat and/or coat which is hung on it.
What is a Rod End Clevis? 376 Items: A Rod End Clevis (CLEVIS,ROD END) is a forked part, having transverse hole(s) or slot(s) in each arm (prong) to accommodate a bolt, pin, or the like, and having a connection facility opposite the fork. It is designed to be attached to a shaft, rod, turnbuckle or the like by welding, threading, and/or pinning. May include provisions for locking. See also YOKE, UNIVERSAL JOINT and CONNECTOR, ROD END. For items specifically designed for aviation, see CLEVIS, ROD END, AVIATION.
What is an Expansion Plug? 248 Items: An Expansion Plug (PLUG,EXPANSION) is a relatively thin metallic item, having a concave or cupped contour, designed to effect its own seal by compression against the circumference of a hole. It is used as a blowout plug in boilers, engines, and the like to relieve the pressure created by the expansion of fluids caused by heat or freezing.
What is a Metal Grille? 48 Items: A Metal Grille (GRILLE,METAL) is a metal frame enclosing a metal core which is constructed of perforated sheet metal, bars, core material, or the like. It is used to form an openwork barrier or screen to allow the passage of a maximum quantity of air and/or light, but excluding the passage of foreign objects. Excludes GUARD, FAN IMPELLER.
What is a Luggage Handle? 11 Items: A Luggage Handle (HANDLE,LUGGAGE) is an item of various shapes, usually U-shaped. It may be flexible. It is designed to be mounted to a piece of luggage to provide facilities for lifting, carrying and the like.
What is a Retaining Strap? 1180 Items: A Retaining Strap (STRAP,RETAINING) is a preformed item of rigid or semirigid material designed to partially surround other items such as cable(s), conduit(s), pipe(s), tube(s), or rod(s) or to completely surround them by means of a bridge strap(s) (which does not tightly clamp against the complete periphery). It is designed to retain and/or position the items close to a structure. It may be fastened to the structure on one end, both ends, or in the center. See also CLAMP, LOOP. Excludes BRACKET, PIPE; STRAP, LEATHER and STRAP, WEBBING.
What is a Swivel Caster? 19 Items: A Swivel Caster (CASTER,SWIVEL) is a caster designed to allow rotation of the wheel(s) or spherical constructed item in more than one plane.
What is a Shelf Bracket? 10 Items: A Shelf Bracket (BRACKET,SHELF) is an item having two legs forming a 90 degree angle (1.5705 radians) and may be rigid or folding. It is to be fastened to a wall and so designed to hold and support a shelf.
What is a Corner Brace? 22 Items: A Corner Brace (BRACE,CORNER) is an item of rigid flat material usually shaped to a 90 degree angle (1.5705 radians), designed to be mounted on a single plane. For items designed to be mounted on more than one plane, see BRACKET, ANGLE.
What is a Rim Latch? 15 Items: A Rim Latch (LATCH,RIM) is a latch designed to be mounted on the surface of a door, drawer, or transom.
What is a Friction Catch? 13 Items: A Friction Catch (CATCH,FRICTION) is a nonpositive fastening device consisting of (1) a SPRING ACTUATED BALL, BOLT, PLUNGER, DOUBLE BEVEL LATCH, or the like, which is designed to be inserted and retained by compression of the spring, in a recess or STRIKE, CATCH. It may include the STRIKE, CATCH or (2) a two piece item consisting of a STUD, FRICTION CATCH and a RECEPTACLE, FRICTION CATCH STUD. The items are designed to position a door, cover, panel, or the like, in a fixed position and are released by normal pull. The items do not have provisions such as a knob, handle, or lever to actuate the bolt or plunger. Excludes CATCH MAGNETIC.
What is a T Plate? 13 Items: A T Plate (PLATE,T) is a flat, T-shaped plate used to join two pieces of material at a flush butt joint by means of screws, bolts and the like and so designed as to eliminate lateral movement.
What is a Flush Lock? 98 Items: A Flush Lock (LOCK,FLUSH) is a lock designed to be mounted with its exposed case flush to the surface of a door, drawer, and the like.
What is a Rim Lock? 50 Items: A Rim Lock (LOCK,RIM) is a lock designed to be mounted to the surface of a door, drawer, and the like.
What is a Door Closer? 13 Items: A Door Closer (CLOSER,DOOR) is a device consisting of a tubular casing and an air controlled plunger, or a liquid or spring controlled arm, used for closing or partially closing and holding doors.
What is a Mortise Lock Set? 17 Items: A Mortise Lock Set (LOCK SET,MORTISE) is a lock set in which the lock is designed to be fitted into the edge of a door, drawer, and the like.
What is a Strap Hinge? 73 Items: A Strap Hinge (HINGE,STRAP) is a hinge whose leaves are greater in dimension transversely to the axis of the hinge pin than they are parallel to the axis of the hinge pin, and whose sides may or may not be tapered along their greatest dimension, from the hinge pin toward a point at their extremity.
Lock,Luggage 10 Items
What is a Butt Hinge Leaf? 230 Items: A Butt Hinge Leaf (LEAF,BUTT HINGE) is an item consisting of one leaf only of a HINGE, BUTT, with or without a hinge pin.
What is a Padlock? 222 Items: A Padlock is a detachable portable fastening device, having a shackle or bow adapted to be opened for engagement through a staple or the link of a chain. The bow or shackle, when locked, is secured in the case by means of a spring-activated pin(s) entering a notch(es) in the shackle. The lock may be opened by inserting and turning a key or keys, by key insertion only, or by a predetermined setting on the dial of a combination lock. For two or more padlocks which are keyed alike and/or master keyed, see PADLOCK SET.
What is a Rim Lock Set? 60 Items: A Rim Lock Set (LOCK SET,RIM) is a lock set in which the lock is designed to be mounted on the surface of a door, drawer, and the like. Excludes CLAMP, RIM CLENCHING.
What is an Expansion Shield? 30 Items: An Expansion Shield (SHIELD,EXPANSION) is an item for inserting in a hole, usually in masonry, designed to be expanded either by means of a setting tool or by the insertion of the bolt, screw or nail for mounting or attaching another object. It may include the bolt, screw or nail.
What is a Mending Plate? 755 Items: A Mending Plate (PLATE,MENDING) is a flat, rectangular shaped item, with holes, used to join or attach two surfaces in the same plane by means of screws, bolts, and the like.
What is a Bridge Clamp? 105 Items: A Bridge Clamp (CLAMP,BRIDGE) is a clamp designed to straddle a cover, door or like item, and used to secure such cover, door or like item to effect a tight joint or seal.
What is a Plug Button? 107 Items: A Plug Button (BUTTON,PLUG) is an item, usually made of metal, having a finished cap with spring tension prongs on the underside, or spring wire fitted into the sides of the walls. When inserted in punched or drilled holes in metal sheets or tubes, the expanding action of the prongs or spring wire holds the item securely in place. It is specifically designed to close a hole; to cover a hole through which passes a shaft, cable, or the like; or to provide a perforated cover for a vent or breather hole. Excludes FASTENER, SPRING TENSION, TRIM.
What is a Drift Bolt? 10 Items: A Drift Bolt (BOLT,DRIFT) is an unthreaded metal rod usually used for securing timbers. It resembles a spike but may be with or without a head or point. Excludes DRIFTPIN; PIN, STRAIGHT, HEADED; and PIN, STRAIGHT, HEADLESS.
What is a Corrosion Preventive Anode? 158 Items: A Corrosion Preventive Anode (ANODE,CORROSION PREVENTIVE) is an item which sacrificially corrodes when coupled to a more noble metal in a conducting medium.
What is a Handwheel? 224 Items: A Handwheel is an item having a major diameter of 3 or more inches (76.2mm) other than items having spoked or sumulated spoked construction, which may be under 3 inches (76.2mm) designed to be gripped by the hand to transmit rotary motion to other devices through a center axis, fabricated in the form of a solid body with simulated spokes or a recessed surface between the rim and the hub, or it may be built up in the form of a frame having a central hub connected to the rim by the spokes. It may have reference markings in the form of dots, arrows, hairline, etc., to indicate the relative position and/or direction of rotation of the item(s) with which it is used. It may also include an integral ratchet device. For similar items having a maximum diameter of less than 3 inches (76.2mm), see KNOB. For items calibrated in units or series of divisions denoting relative positioning of associated devices, see DIAL (as modified). Excludes STEERING WHEEL.
What is a Dust And Moisture Seal Protective Cap? 278 Items: A Dust And Moisture Seal Protective Cap (CAP,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes COVER, ELECTRICAL CONNECTOR; HOOD, SEALING, BOTTLE; and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Plug? 249 Items: A Dust And Moisture Seal Protective Plug (PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into the opening(s) of various items to provide mechanical protection and/or prevent the entrance of foreign matter during painting, shipping storage, or the like. It is not designed to retain fluids under pressure during equipment operation. Excludes PLUG (as modified) and STOPPER, BOTTLE. For items designed to fit into or over the opening(s) of various items, see CAP-PLUG, PROTECTIVE, DUST AND MOISTURE SEAL.
What is a Dust And Moisture Seal Protective Cap-Plug? 181 Items: A Dust And Moisture Seal Protective Cap-Plug (CAP-PLUG,PROTECTIVE,DUST AND MOISTURE SEAL) is an item specifically designed to fit into or over the opening(s) of various items to provide mechanical protection and/or to prevent the entrance of foreign matter during painting, shipping, storage, or the like. It is not designed to retain fluids under pressure during equipment operation. For items designed to fit only into an opening, see PLUG (as modified) and STOPPER (as modified). For items designed to fit only over an opening, see BOOT (as modified); CAP (as modified); COVER (as modified); and HOOD (as modified).
What is a Handle Grip? 403 Items: A Handle Grip (GRIP,HANDLE) is an item of cylindrical or pistol design, made of metallic or nonmetallic material, specifically designed to be used on a handle to provide a formed gripping surface. Excludes types with integral switch(es) for control of armament.
What is a Blank Panel? 19 Items: A Blank Panel (PANEL,BLANK) is a panel designed to fill a space not occupied by actual operating components, and may have instructions, component designations, or component identifications etched or printed thereon.
What is a Support Hook? 34 Items: A Support Hook (HOOK,SUPPORT) is a rigid item with one end designed to be mounted to a wall or other surface, and with the other portion shaped to a curve or angle for the purpose of supporting a drop wire, stay wire, drop wire clamp, cables and the like. It does not have gripping facilities. Excludes BRACKET,PIPE.
What is a Pad Eye? 16 Items: A Pad Eye is a rigid, metal, platelike item with an edgewise projection containing one or more openings. The opening is usually round or elliptical in shape. It is normally welded, bolted, or otherwise fixed to a structure. It is used as a catch or point of attachment for other items such as hooks, rope, and the like. Excludes, STAPLE, HASP; STRIKE, CATCH; and BRACKET, EYE, NON ROTATING SHAFT. See also ADAPTER (1), AIRCRAFT MOORING; ADAPTER (1), AIRCRAFT TOWING; TOWING EYE, AIRCRAFT; BOLT, EYE; COUPLER (as modified); and HASP, HINGED.
What is a Nut And Bolt Retainer? 61 Items: A Nut And Bolt Retainer (RETAINER,NUT AND BOLT) is an item designed to fit over and hold a nut or bolt head to prevent it from turning. See also LOCKING PLATE, NUT AND BOLT.
What is a Plain Solid Disk? 121 Items: A Plain Solid Disk (DISK,SOLID,PLAIN) is a circular item with two parallel bearing surfaces without hole(s) or groove(s). It has an outside diameter greater than its length, and may be fabric reinforced. Do not use if a more specific item name applies. For items primarily designed to rupture at a predetermined pressure, see DISK, RUPTURABLE. For items made of felt, see FELT, MECHANICAL, PREFORMED. For metallic or plastic items with a laminated cross section, see SHIM. Excludes DIAPHRAGM, VALVE, FLAT; DIAPHRAGM, VALVE, SPECIAL SHAPED; DISK, VALVE, NONMETALLIC; FILTERING DISK FLUID; and INSULATOR, DISK.
What is an Angle Bracket? 2121 Items: An Angle Bracket (BRACKET,ANGLE) is a ridge item, usually of flat material, formed into a dihedral angle (generally a right angle) which may be reinforced; it is designed to position, align, or support an item(s) in relation to another. Excludes BRACE (as modified); BRACKET (1), MOUNTING; and BRACKET, SHELF.
What is an Eye Hook? 25 Items: An Eye Hook is a holding device having a hook shaped head with an eye formed in the shank. It may have an eye attached to the shank eye. See also HOOK AND EYE, DOOR.
What is a Snap Hook? 95 Items: A Snap Hook is a metal fastening device one or both ends of which are hook shaped with a closing or locking device over the throat opening which is held closed by spring action. If hook shaped on one end only the opposite end is provided with a fixed, loose, or swivel loop or opening for connecting to another item. Excludes cargo hooks with safety devices.
What is a Buckle? 17 Items: A Buckle is a fastening device used to join two ends of a belt, strap or the like. It may be a single unit designed to be attached to one end of a belt or strap and secure the opposite end by penetration, by clamping, or by friction, or it may consist of male and female sections having one section attached at each end of the belt or strap and joins the two ends by a hook-like or other interlocking action.
What is a Loop Clamp? 1281 Items: A Loop Clamp (CLAMP,LOOP) is a clamp designed to surround other item(s) such as cable(s), conduit(s), pipe(s), hose(s), or tube(s), and to fasten together or to another object or structure. Includes straight flexible items. For items specifically designed to clamp a hose to a connection to prevent leakage, see CLAMP, HOSE. See also HANGER, PIPE and CLIP, SPRING TENSION. For retaining straps with a bridge, see STRAP, RETAINING. Excludes CLAMP, ELECTRICAL; BAND, RETAINING; CLAMP (1), C; BRACKET PIPE.
What is a Hand Crank? 66 Items: A Hand Crank (CRANK,HAND) is an item consisting of a radial arm having a handle parallel to its pivoted axis for transmitting motion to a shaft or object. It may have an integral extension. For items without an integral handle, see, ARM (1), HAND CRANK. Excludes HANDWHEEL; and HANDLE, WINDOW REGULATOR.
What is a Door Handle? 66 Items: A Door Handle (HANDLE,DOOR) is a device designed to actuate the mechanism of a door latch, either by a turning or pulling of the handle, or by operation of a PUSH BUTTON or trigger, and it may be with or without an escutcheon plate. Exludes items having an integral latch. See also DOORKNOB.
What is a Dust And Moisture Seal Boot? 23 Items: A Dust And Moisture Seal Boot (BOOT,DUST AND MOISTURE SEAL) is a flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. Sealing may be either static or dynamic. The item may include mounting hardware (support plates, clamps and the like). Excludes BELLOWS, PROTECTION; GROMMET, NONMETALLIC; and CABLE NIPPLE, ELECTRICAL. See also CAP, ELECTRICAL; CAP, PROTECTIVE, DUST AND MOISTURE SEAL; and SHIELD, ELECTRICAL CONNECTOR.
What is a Turnbuckle Body? 60 Items: A Turnbuckle Body is a metal loop, sleeve or solid item having both ends threaded or one end threaded and the other end designed to accommodate a swivel. Items with both ends threaded shall have right hand screw threads on one and left hand screw threads on the other. It is a component of TURNBUCKLE. See also TIE ROD, TENSIONING, THREADED END. For items specifically designed for aviation, see TURNBUCKLE BODY, AVIATION.
What is a Ball Socket Seat? 12 Items: A Ball Socket Seat (SEAT,BALL SOCKET) is a rigid item, usually circular in shape, having a concave or bevel bearing surface on one end. It is designed to mate with and provide a wear surface for the ball of a ball stud, control rod, arm, or the like. The other end is usually flat, flanged, or offset and is usually designed to mate with a flat surface or spring. Includes metal items having a plastic ball socket insert. See also WASHER, CONCAVE.
What is a Quick Release Plunger? 14 Items: A Quick Release Plunger (PLUNGER,QUICK RELEASE) is an externally threaded tubular item containing a spring loaded device (pin, ball, etc.). The device is held in the thrown position by the spring and recedes when pressure is exerted against it. It is used as a locator, detent, and the like.
What is a Catch Strike? 84 Items: A Catch Strike (STRIKE,CATCH) is a platelike item designed to be fastened to a door, door jamb, or the like, for the purpose of receiving the mating pin, plunger or bolt, of a lock, latch, or catch. See also RECEPTACLE, FRICTION CATCH STUD.
What is an Escutcheon Plate? 57 Items: An Escutcheon Plate is an item of various shapes designed to be used as a mounting plate and/or ornament for door handles, window regulator handles, control rods, and the like.
What is a Flush Catch? 25 Items: A Flush Catch (CATCH,FLUSH) is a positive fastening device having an integral flush lever or button actuator designed to be mounted so that when in locked position no portion protrudes above the exterior surface of the door, cover, or the like. Excludes CATCH (as modified) and LATCH (as modified).
What is a Retaining Band? 281 Items: A Retaining Band (BAND,RETAINING) is a flexible or semiflexible metal strip designed to partially surround and retain an item against a structure, frame, bracket, or the like. Includes a single segment of a sectioned type CLAMP, LOOP or CLAMP, HOSE. Both ends may have, but one end must have, a loop to accommodate a hinge pin, or a stud welded to the end of the band. May be furnished with a trunnion, T-bolt, pin, latch, or the like. For items designed to completely surround an object(s), see CLAMP, LOOP. See also COVER, ACCESS and STRAP, RETAINING.
What is a Bow Handle? 239 Items: A Bow Handle (HANDLE,BOW) is an item, usually basically U-shaped, designed to be rigidly attached to another item such as a drawer, door, or window to provide a grip for opening, closing, pulling, and the like. Includes sash lifts of the bow type and handles designed for the purpose of carrying an item. It may or may not include a mounting plate. Excludes HANDLE,DOOR.
What is a Hook Handle? 25 Items: A Hook Handle (HANDLE,HOOK) is an item, basically flat, with an integral hook type lip, tongue, or the like designed to be attached to another item such as a window, drawer, or door to provide a grip for opening, closing, lifting, and the like. Includes sash lifts of the integral hook type. Excludes HANDLE, DOOR.
What is a Recess Handle? 20 Items: A Recess Handle (HANDLE,RECESS) is a recessed item designed to be attached to another item such as a door, drawer, or window to provide access for the finger tips for opening, lifting, pulling, and the like. Includes sash lifts of the recessed type.
What is a Bail Handle? 36 Items: A Bail Handle (HANDLE,BAIL) is an item, usually basically semicircular or rectangular, designed to be swivel mounted to another item such as a container, chest, drawer, or door to provide facilities for lifting, opening, pulling, and the like. It may be with or without a mounting plate. Excludes HANDLE, DOOR.
What is a Double Angle Bracket? 273 Items: A Double Angle Bracket (BRACKET,DOUBLE ANGLE) is a rigid item usually fabricated from flat material, forming two alternate or two adjacent interior angles, both which are less than 180 degrees (3.141 radians). It is designed to position, align, and/or support an item. It may be reinforced. See also BRACKET, ANGLE and BRACKET (1), MOUNTING.
What is a Strap Fastener Loop? 16 Items: A Strap Fastener Loop (LOOP,STRAP FASTENER) is an item of rigid material having an aperture or opening through which the end(s) of a strap(s) or belt(s) is designed to be inserted, folded, and secured to itself by sewing, riveting, or the like. It is used to fasten the end(s) of a strap or belt to itself, to another belt or strap, or to an object or structure.
What is a Leather Strap? 59 Items: A Leather Strap (STRAP,LEATHER) is a narrow strip of leather cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and LEATHER (as modified). Do not use if a more specific item name is applicable.
What is a Webbing Strap? 56 Items: A Webbing Strap (STRAP,WEBBING) is a narrow strip of webbing cut to a definite length, having one or both ends processed. It is usually designed for, and may have, one or more attachments or fasteners, such as BUCKLE; LOOP, STRAP FASTENER; strap end clip; RING, DEE; Hook; and the like. Excludes STRAP, BERTH, MATTRESS RETAINING; STRAP, CHIN; safety straps; and WEBBING, TEXTILE. Do not use if a more specific item name applies.
What is a Spring Tension Clip? 134 Items: A Spring Tension Clip (CLIP,SPRING TENSION) is a preformed item of semirigid material designed to retain, position, fasten, or support other items, such as cable(s), access cover(s), by its own inherent spring action. It may be fastened to a structure by bolt(s), clip(s), screw(s), and the like. For items conducting electric current, see CLIP, ELECTRICAL or CLAMP, ELECTRICAL. For items which partially surround an item, see STRAP, RETAINING. For items which entirely surround an item and do not have inherent spring tension, see CLAMP, LOOP. See also CLIP, RETAINING. Do not use if a more specific item name is available.
What is a Headless Straight Rod? 96 Items: A Headless Straight Rod (ROD,STRAIGHT,HEADLESS) is a headless, cylindrically shaped, unthreaded, solid metallic item with or without a drilled hole(s) perpendicular to the axis. Its length exceeds 12 inches (304.8mm) and it is of one nominal diameter. One or both ends are squared, chamfered, or rounded. Do not use if a more specific item name is applicable. Excludes BAR, METAL and PIN, STRAIGHT, HEADLESS.
What is a Cushioning Pad? 29 Items: A Cushioning Pad (PAD,CUSHIONING) is a pad of various shapes and cross sections, designed for mounting on vehicular panels, doors, hatches, bulkheads, racks, boxes, and the like, for the protection of personnel and equipment from injury and/or damage resulting from sudden stops, jarring, bumping, etc.
What is a Nut And Bolt Locking Plate? 152 Items: A Nut And Bolt Locking Plate (LOCKING PLATE,NUT AND BOLT) is a relatively thin metal item of various shapes, having two or more bolt holes and locking ears or tabs. The item is designed to be inserted on the bolts and the ears or tabs bent against the wrenching flat(s) of the bolt head or nut to restrict loosening of the bolt or nut. The locking ears or tabs may be prebent. See also RETAINER, NUT AND BOLT.
What is a Butt Hinge? 156 Items: A Butt Hinge (HINGE,BUTT) is a hinge usually with rectangularly shaped leaves. The dimension parallel to the hinge pin must be greater than the dimension transverse to the hinge pin. It may have a tension coil spring at its pivot(s) for closing action, and may have a third member between its pivot(s) to permit the door, or the like, to swing in an arc from either side.
What is a Lock-Release Lever? 81 Items: A Lock-Release Lever (LEVER,LOCK-RELEASE) is a rigid, manually operated lever, designed to secure another item or instrument in position, and when activated, releases the item to allow adjustment, removal, or operation. It has a single hole, and is a component of a spring-loaded mechanism, a cam pressure mechanism, or a cam lever operated pin.
What is an Electronic Equipment Hardware Kit? 27 Items: An Electronic Equipment Hardware Kit (HARDWARE KIT,ELECTRONIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) on accessory to any other electronic component or equipment or (2) on electronic equipment to any other component or equipment. For kits containing common hardware and other items, such as tools, etc., see INSTALLATION KIT (1), ELECTRONIC EQUIPMENT.
What is a Helical Compression Spring Retainer? 75 Items: A Helical Compression Spring Retainer (RETAINER,HELICAL COMPRESSION SPRING) is a cylindrical item specifically designed to fit over the end of, and completely encase the spring. The open end is usually flanged, the opposite end may be closed or have an orifice to accommodate a guide, plunger, or the like. It is used to position the spring and restrain lateral motion. It may provide a seat for the spring. Excludes HOLDER, SPRING.
What is a Helical Compression Spring Seat? 288 Items: A Helical Compression Spring Seat (SEAT,HELICAL COMPRESSION SPRING) is a circular item, usually having a flat or grooved flange, boss(es), and/or counterbore designed to accommodate the end of the spring. It is used to position the spring, but does not encase the spring or restrain lateral motion. It may be used in conjunction with a RETAINER, HELICAL COMPRESSION SPRING. Excludes WASHER (1), (as modified); SEAT, BALL SOCKET and HOLDER, SPRING. See also ROTOR, ENGINE POPPET VALVE.
What is a Dashpot? 29 Items: A Dashpot is a device usually consisting of a piston and cylinder with means of securing one or both ends. It is used for cushioning or clamping a movement to avoid shock, absorb vibration,or for time delay, by the restricted passage of fluid (gas or liquid) through an orifice or around the piston.
What is a Nonmetallic Solid Wheel? 11 Items: A Nonmetallic Solid Wheel (WHEEL,SOLID,NONMETALLIC) is a wheel which is cast or molded from a material other than metal. It may have a tread but does not have facilities to mount a tire or a rim. For items which have facilities to mount a tire or a rim see WHEEL, PNEUMATIC TIRE; and WHEEL, METAL TIRE.
What is a Clamping Catch? 68 Items: A Clamping Catch (CATCH,CLAMPING) is a positive fastening device consisting of a mountable base with an extended loop, claw, or the like. It may include a catch strike and mounting hardware for its complete installation on flat surfaces. The loop, claw, or the like can be manually engaged or disengaged readily for the purpose of securing the mating sections of a suitcase, locker-trunk, shipping and storage container, prefabricated building, tool chest or the like. Excludes CATCH, ELBOW; CATCH, FLUSH; CATCH, FRICTION; and LATCH or LOCK (as modified).
What is an Extension Drawer Slide? 22 Items: An Extension Drawer Slide (SLIDE,DRAWER,EXTENSION) is an item designed to be installed in a cabinet or rack to provide support and a sliding or rolling surface for a drawer, or the like. A portion of the slide extends with the drawer to provide support when the drawer is in the open position.
What is a Vent Plug? 72 Items: A Vent Plug (PLUG,VENT) is a ported item with or without external threads. The port(s) may contain a filtering disk or WIRE FABRIC. It is designed to be inserted into an opening in a cylinder, pump, regulator, valve, housing, casing, or the like, to permit the free flow of fluid from or to the atmosphere. Excludes BREATHER.
What is an Access Cover? 818 Items: An Access Cover (COVER,ACCESS) is a rigid or flexible item of various shapes attached to a structure for the purpose of providing access for inspection, service, replacement of components and/or adjustments or mounting operations. It is designed to be attached by means of bolt holes, slots, mounting ears, tabs, and the like. To permit access, the mounted cover requires partial or complete removal. It may include an observation window. For items permanently attached by hinges and the like, see DOOR, ACCESS (as modified). Excludes all covers not specifically designed to provide access for the purposes listed above.
What is a Filler Opening Cap? 54 Items: A Filler Opening Cap (CAP,FILLER OPENING) is a part basically circular in shape, designed to cover or seal the filler-neck or inlet opening of a fuel tank, radiator, oil reservoir, liquid storage tank or the like. It may be either permanently attached to the object for which it is designed or provided with a means of removal and replacement. Excludes CAP, VENT, FUEL STORAGE TANK; and COVER (1), (as modified).
What is a Threaded Rod End? 47 Items: A Threaded Rod End (ROD END,THREADED) is a cylindrical item, tubular or solid on one end and internally or externally threaded on the other. It is designed to be permanently attached to the end of a tube or rod to provide a threaded connection for installing a threaded clevis, connector or the like.
What is a Manual Control Handle? 94 Items: A Manual Control Handle (HANDLE,MANUAL CONTROL) is a rigid item with a plain or serrated gripping surface, designed to be grasped with the hand(s) for the purpose of manually transmitting rotary or linear motion to other devices, and/or holding and guiding an item in a desired position during operation. It may be fixed or rotating and furnished with mounting attachments, such as pin, stud, bolt, or the like. It may also be adjusted to a hand crank arm, a handwheel, or the like. Excludes KNOB; CRANK, HAND; and LEVER, MANUAL CONTROL. See also HANDLE (as modified). Do not use if a more specific name applies.
What is a Protection Bellows? 70 Items: A Protection Bellows (BELLOWS,PROTECTION) is a nonmetallic, accordian shaped protective covering designed to flex due to relative motion between parts to which its opposite ends are attached. It is primarily used to cover the opening around a movable push-pull rod or part passing through a hole in a bulkhead, partition or the like.
What is a Lever Bracket? 20 Items: A Lever Bracket (BRACKET,LEVER) is a rigid item designed to support a lever fulcrum and confine the movement of the lever to a predetermined range of positions.
What is a Block Clamp? 60 Items: A Block Clamp (CLAMP,BLOCK) is a square or rectangular multipiece item designed to be attached to another object or structure. It must have one or more holes designed to surround and securely grip items such as electrical cables, conduits, pipes, tubes and/or hoses. It may have one or more holes designed to prevent snagging or chafing and provide support and/or guidance to moving cable passing through it. It may have an integral clamping feature. For items specifically designed to serve as a guide, see FAIRLEAD, BLOCK and FAIRLEAD SECTION, BLOCK. Excludes BRACKET, PIPE.
What is a Mounting Bracket? 1259 Items: A Mounting Bracket (BRACKET,MOUNTING) is a bracket of various shapes (other than angle), designed to be attached to a supporting surface for the specific purpose of positioning, aligning and/or supporting another item. Excludes BRACE (as modified); BRACKET, ANGLE; and BRACKET, DOUBLE ANGLE. See also BRACKET (1), ELECTRICAL CONNECTOR; BRACKET, FIRE EXTINGUISHER; BRACKET, SOLENOID; BRACKET, TRACK, SLIDING DOOR; and RETAINER (as modified).
What is a Retaining Bail? 40 Items: A Retaining Bail (BAIL,RETAINING) is a metallic item of various configurations, formed for example as a U or semicircle, it must have finished ends to provide a method for attachment to other items. It is designed to secure and seal by applying pressure to items such as, bowls, caps, covers and the like, through an inherent spring tension or a manual adjusting mechanism.
What is a Mounting Plate? 454 Items: A Mounting Plate (PLATE,MOUNTING) is a metallic or nonmetallic item which is rigid, flat and generally smooth. Its thickness is small in comparison to its length and width. It is designed for mounting another item and may have drilled or threaded holes or other facilities for mounting to a supporting object or surface. See SUPPORT, as modified. Do not use if a more specific name applies.
What is a Latch Bar? 20 Items: A Latch Bar (BAR,LATCH) is a rod or bar, which is moved by the actuator of a BOLT(2), BARREL or a CATCH (as modified). It enters a STRIKE, CATCH. Excludes STUD, FRICTION CATCH.
What is a Synchro Clamp? 12 Items: A Synchro Clamp (CLAMP,SYNCHRO) is a clamp designed to hold an item in position, alignment or in close proximity by rigidly gripping the projecting rim, ridge, collar or edge of the item. A lockwasher, bolt, screw or the like may be a part of the item of supply.
What is a Mechanical Stop? 42 Items: A Mechanical Stop (STOP,MECHANICAL) is an item designed to restrict the movement of a rotary mechanism, linear mechanism or its components. It protects a mechanism from loss of adjustment or damage due to extreme movement. It may be wedge shaped with a threaded shank projecting from the apex or it may be round or rectangular in cross section, with mounting holes or slots, and is usually longer than its width. Excludes KEY, MACHINE, and BUMPER (as modified).
What is a Spacing Threaded Standoff? 49 Items: A Spacing Threaded Standoff (STANDOFF,THREADED,SPACING) is a standoff that must have a threaded end(s) or be internally threaded its full length. For items having external threads on both ends, see STUD (as modified). For items with an outside contour that is the same for the entire length, are flat on top and bottom, having internal threads its full length, and the length does not exceed twice the width across the flats or outside diameter, see NUT (as modified); use maximum dimensions(s) for compliance.
What is a Multiple Angle Bracket? 66 Items: A Multiple Angle Bracket (BRACKET,MULTIPLE ANGLE) is a rigid item, generally of flat material, forming several angles (interior and/or exterior), all of which are less than 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. It may have a plastic or resilient protective covering. Excludes BRACKET, DOUBLE ANGLE; BRACKET, MOUNTING and STRAP, RETAINING.
What is a T Bracket? 24 Items: A T Bracket (BRACKET,T) is a rigid item generally of flat material which resembles the letter T.It has two interior angles (usually right angles) which together equal 180 degrees (3.141 radians). It is designed to position, align and/or support an item(s) in relationship to another. Excludes PLATE, T and BEAM, STRUCTURAL.
What is a Caster Wheel? 38 Items: A Caster Wheel (WHEEL,CASTER) is a circular item made of metallic or nonmetallic material designed for use as part of a CASTER, RIGID and/or CASTER, SWIVEL. The tread may or may not be removeable and it is usually furnished with bearings installed. For items constructed entirely of one material see WHEEL(1), SOLID, METALLIC or WHEEL(1), SOLID, NONMETALLIC.
What is a Pipe Hanger? 30 Items: A Pipe Hanger (HANGER,PIPE) is a metallic or nonmetallic item designed to suspend, support, retain, and/or position items such as cable(s), conduit(s), pipe(s), tube(s), and the like from a structure. It may be fastened vertically or horizontally to the structure by means of rod(s), bolt(s), screw(s), and the like. Excludes CLAMP (1), LOOP; STRAP, RETAINING; CLAMP (1), ELECTRICAL; HANGER, WIRE STRAND, SUPPORT (1), ELECTRICAL CABLE; HANGER, CABLE; and hook, support.
What is a Runner? 18 Items: A Runner is an item usually flat, designed to provide a sliding surface when attached to equipment, for purposes of mobility.
What is a Mechanic Equipment Hardware Kit? 19 Items: A Mechanic Equipment Hardware Kit (HARDWARE KIT,MECHANIC EQUIPMENT) is a collection of common and/or specially designed hardware items not all having the same name, such as grommets, washers, brackets, mounting plates, clamps, nuts and bolts, specifically designed to fasten or attach (1) an accessory to any other mechanical component or equipment or (2) a mechanical equipment to any other equipment or component.
What is a Lock Key? 29 Items: A Lock Key (KEY,LOCK) is an item, usually made of metal, which is allocated to a specific lock. Via the key, the lock mechanism can be activated.
What is a Dust And Moisture Seal Protective Cover? 58 Items: A Dust And Moisture Seal Protective Cover (COVER,PROTECTIVE,DUST AND MOISTURE SEAL) is a cover of various shapes, sizes and materials, specifically designed to fit over the opening(s) of mechanical connections such as drive lines, air and fluid ducts and the like, of various equipments to provide mechanical protection and/or prevent the entrance of foreign matter during shipping, storage or maintenance.The cover is not an integral part of the equipment when the equipment is installed in the end item.It is designed to be attached by means of bolt holes, slots, mounting ears, tabs and the like.See also CAP (1), PROTECTIVE, DUST AND MOISTURE SEAL.Excludes COVER, ACCESS.
What is an Utility Resilient Mount? 95 Items: An Utility Resilient Mount (MOUNT,RESILIENT,UTILITY) is an item made of material having elastic properties. It may have rigid mounting facilities such as a flange(s), sleeve(s), stud(s) or the like. It is designed to isolate or dampen shock and/or vibration of a continuous or intermittent origin and serve as a support for an item to be isolated. Excludes MOUNT, RESILIENT, WEAPON SYSTEM; SPRING (as modified); BUMPER, NONMETALLIC; BUMPER, RUBBER; BUSHING, NONMETALLIC; hydraulic and pneumatic shock absorbers, dashpots, grommets and shock pads.
What is an Access Door Hinge? 94 Items: An Access Door Hinge (HINGE,ACCESS DOOR) is a one piece rigid item designed to rotate an access door into an open or closed position. It is drilled at one end to accommodate a shaft which serves as a pivot or axis. The other end has a curved base conforming to the contour of the access door. The base has mounting holes or other mounting facilities. Excludes LEAF,BUTT HINGE.
Holder,Roller 14 Items
What is a Key Blank? 50 Items: A Key Blank is an item usually made of metal designed for insertion into various lock openings, and when properly cut, will operate the mechanism. It may have a flat, irregular, or cylindrical cross-sectional shape.
What is a Clip Retainer Plate? 42 Items: A Clip Retainer Plate (PLATE,CLIP RETAINER) is a flat rigid item designed to hold a clip retainer in a predetermined position. It must be provided with holes for mounting.
What is a Resilient Mount Plate? 16 Items: A Resilient Mount Plate (PLATE,RESILIENT MOUNT) is an item specifically designed to be placed between one or more resilient mounts and an item to be cushioned. It may be secured to either the mounts or the cushioned item.
What is a Detent Plunger? 21 Items: A Detent Plunger (PLUNGER,DETENT) is a metallic item, solid or tubular, having one closed end formed to fit into a shallow recess or groove, or having a flat or concave surface used to exert pressure against a component part. It is designed for use with a SPRING, HELICAL, COMPRESSION, which exerts pressure to hold a shaft, pin, or the like, in a semirigid position in housings or other mechanical devices. Does not have internal or external threads. Excludes PLUNGER, QUICK RELEASE. For electrical items, see DETENT, SWITCH and PLUNGER, SOLENOID. See also CATCH, FRICTION.
What is an Access Door Locking Ring? 22 Items: An Access Door Locking Ring (RING,LOCKING,ACCESS DOOR) is an item having a V-, U- or channel-shaped cross section, with fastening and tightening devices on the ends. It is specifically designed to surround, secure and/or seal an access door. Excludes RING, LOCKING, METAL DRUM COVER and CLAMP, RIM CLINCHING.
What is a Headless Grooved Rod? 41 Items: A Headless Grooved Rod (ROD,GROOVED,HEADLESS) is a headless, unthreaded, solid metallic cylindrical item, having either circular or longitudinal groove(s). Its length exceeds 12 inches (304.8mm) and is of one nominal diameter. Do not use if a more specific name is applicable. Excludes PIN, GROOOVED, HEADLESS; SHAFT (as modified); and PIN, VEHICULAR LEAF SPRING SHACKLE.
What is a Manual Control Lever? 119 Items: A Manual Control Lever (LEVER,MANUAL CONTROL) is a rigid item of various shapes and cross-sections, specifically designed to manually actuate and/or regulate a variety of mechanisms. It usually has an integral handgrip, knob, or the like, or provisions for the mounting of the same. It may have accommodations for locking and/or positioning. The point of fulcrum may be an integral shaft perpendicular to the axis or a through hole to provide a definite means of securing, and usually has additional accommodation(s) for attachment of CONNECTING LINK,RIGID; WIRE ROPE ASSEMBLY,SINGLE LEG; and CLEVIS,ROD END; and the like. Excludes ARM (as modified); LEVER,REMOTE CONTROL; AND BELL CRANK.
What is a Sealing Plug Assembly? 44 Items: A Sealing Plug Assembly (PLUG ASSEMBLY,SEALING) is an item consisting of a cylindrical plug which may be grooved and a driving element such as a tapered drive pin, a ball or the like which widens the plug. The plug is designed to close a hole in an item and thus prevent liquid from leaking out.
What is a Bumper? 27 Items: A Bumper is an item so designed that when attached to an object, protects that objec from damage by reducing the force of impact with another object. For external vehicular bumpers see BUMPER, VEHICULAR. Excludes GROMMET (as modified); BUSHING, NONMETALLIC; PAD, CUSHIONING and WASHER (as modified).

Stock Items From Supply Class 5340 Page 52 of 72

5340-15-151-9601
Staffa

151519601
0-162956: RNCC: 3 | RNVC: 2

27 Jul 2000

5340-15-106-4839
Leva A Forcella

151064839
2.4629.022.7: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-181-6309
Ancorante Pesante H

151816309
371785: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-153-0011
Supporto A Sella Tu

151530011
204656F01: RNCC: 3 | RNVC: 2

14 Nov 2000

5340-15-006-2744
Guida Scorrimento S

150062744
0-33920: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-221-2565
Turnbuckle

152212565
TENDITORE-A: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-066-1728
Handle Lock

150661728
P-892991-401: RNCC: 3 | RNVC: 2
P892991-401: RNCC: 5 | RNVC: 2

10 Feb 1986

5340-15-230-2292
Set Materiale Di Fi

152302292
65-2E: RNCC: 3 | RNVC: 2
534015E139954: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-149-5969
Cover Assy

151495969
1230-32-029: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-151-9407
Staffa

151519407
0-173997: RNCC: 3 | RNVC: 2
00173997: RNCC: 3 | RNVC: 2
(241)A39630-173997: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-108-1400
Dust And Moisture Seal Protective Plug

151081400
109-0619-40-1: RNCC: 3 | RNVC: 2

15 Jul 1987

5340-15-120-0522
Electrical-Me Post

151200522
E600038-17: RNCC: 3 | RNVC: 2

14 Jun 1995

5340-15-179-0459
Roller Str Support

151790459
051251-03-00: RNCC: 3 | RNVC: 2

20 Apr 2006

5340-15-220-4413
Ganci Salvavita

152204413
GNC SLVVT: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-007-2763
Paracolpo Supporto

150072763
1388101: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-115-2754
Lever

151152754
518050250: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-139-7093
Chiavistello

151397093
A.0123700: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-005-6495
Coperchio Speciale

150056495
0-28554: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-144-9257
Registro Cavo

151449257
2-7-0424: RNCC: 3 | RNVC: 2

10 Feb 1997

5340-15-157-4212
Nut And Bolt Retainer

151574212
21505733: RNCC: 3 | RNVC: 2

14 Jul 2003

5340-15-162-0468
Manual Control Handle

151620468
45991: RNCC: 3 | RNVC: 2

5 Dec 2000

5340-15-154-3953
Threaded End Tensioning Tie Rod

151543953
1001519908: RNCC: 3 | RNVC: 2
(241)A97721001519908: RNCC: 5 | RNVC: 2

22 May 2001

5340-15-235-6372
Cavalletto T Ruote

152356372
STUDIO: RNCC: 3 | RNVC: 2
534015E150246: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-152-0152
Tampone

151520152
0-154475: RNCC: 3 | RNVC: 2
00154475: RNCC: 3 | RNVC: 2
(241)A39630-154475: RNCC: 5 | RNVC: 2

2 Aug 2000

5340-15-151-7077
Staffa

151517077
0-107298: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-107-1729
Rim Clen Clamp (1)

151071729
RS414349A: RNCC: 3 | RNVC: 2

24 May 1989

5340-15-221-6973
Padlock

152216973
5340RI0992039: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-154-8840
Rubber Bumper

151548840
10-G-55: RNCC: 3 | RNVC: 2

7 Nov 2001

5340-15-152-9073
Forcella Testa Di T

151529073
62039F01: RNCC: 3 | RNVC: 2

7 Nov 2000

5340-15-007-3731
Maniglia Speciale

150073731
0-33927: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-089-5057
Tornichetto

150895057
14-10-12-11: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-170-3111
Cover

151703111
321305-P24: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-149-5113
Assieme Manicotto S

151495113
28032-5: RNCC: 3 | RNVC: 2
28032-5: RNCC: 5 | RNVC: 9

30 Mar 1999

5340-15-153-7680
Base (1) Per Sosteg

151537680
01900A106320: RNCC: 5 | RNVC: 2
T0064899: RNCC: 5 | RNVC: 2
01900A106320: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-006-2745
Guida Scorrimento

150062745
0-33935: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-105-8187
Sostegno Elastico

151058187
82045: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-199-4353
Plachetta Di Freno

151994353
486548: RNCC: 3 | RNVC: 2
(241)A0866486548: RNCC: 5 | RNVC: 2

4 Apr 2005

5340-15-149-4555
Blocchetto Di Fermo

151494555
1084.004: RNCC: 3 | RNVC: 2

10 Mar 1999

5340-15-153-2745
Threaded End Tensioning Tie Rod

151532745
122649205: RNCC: 2 | RNVC: 3

12 Dec 2000

5340-15-116-2301
Threaded End Tensioning Tie Rod

151162301
190523104: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-15-106-2594
Terminale A Scatto

151062594
2202500: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-175-6421
Chiusura A Scatto P

151756421
R0MA20300: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-005-6119
Piastrina Speciale

150056119
0-10359: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-176-3947
Tassello In Nylon C

151763947
SB12/6: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-178-3999
Threaded End Tensioning Tie Rod

151783999
155564-1: RNCC: 3 | RNVC: 2

31 May 2005

5340-15-152-3878
Flangia

151523878
4130301064: RNCC: 3 | RNVC: 2
0-117471: RNCC: 5 | RNVC: 2
4130301064: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-120-5079
Handle

151205079
P-883500-801/802-12C001-510: RNCC: 3 | RNVC: 2
P883500-801/802-12C001-510: RNCC: 5 | RNVC: 2

28 Jun 1995

5340-15-142-2025
Handwheel

151422025
720-200-030: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-149-6114
Key Assy

151496114
518-38-0260: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-113-2076
Helical Compression Spring Seat

151132076
772281: RNCC: 3 | RNVC: 2

14 Jun 1988

5340-15-105-8499
Double Angle Bracket

151058499
002.0303.3: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-209-4126
Lucchetto A Terra P

152094126
MOD.SF: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-118-6626
V Coulissante Glace

151186626
75208360: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-006-0504
Piastra

150060504
811-01-69: RNCC: 3 | RNVC: 2

23 Aug 1979

5340-15-151-9363
Double Angle Bracket

151519363
0-172267: RNCC: 3 | RNVC: 2
(241)A39630-172267: RNCC: 5 | RNVC: 2

26 Jul 2000

5340-15-124-3945
Guide (Guida Suppor

151243945
5430-42-610: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-147-5148
Morsetto Per Tubo

151475148
31801-001: RNCC: 5 | RNVC: 2
31801-001: RNCC: 5 | RNVC: 9
31801-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-042-2650
Fascetta Apc

150422650
6117-13: RNCC: 3 | RNVC: 2

5 Apr 1972

5340-15-138-6517
Staffa Fissaggio Si

151386517
001793-I-2: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-003-4472
Headless Straight Rod

150034472
52060053AE: RNCC: 3 | RNVC: 2
(241)A424952060053AE: RNCC: 5 | RNVC: 2

13 Nov 2013

5340-15-156-2070
Magnetic Chip D Kit

151562070
CBD70804K01: RNCC: 3 | RNVC: 2
(241)A3460CBD70804K01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-132-3847
Turnbuckle

151323847
4601984: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-151-4574
Shock Mount Pad

151514574
UXGP0030000: RNCC: 3 | RNVC: 2

29 May 2000

5340-15-114-0640
Escutcheon Plate

151140640
BA32637: RNCC: 3 | RNVC: 2

17 Apr 1992

5340-15-163-1364
Clip

151631364
46751026: RNCC: 3 | RNVC: 2

1 Jul 2002

5340-15-063-8618
Cuneo Per Morsetto

150638618
01294: RNCC: 3 | RNVC: 2
01294: RNCC: 5 | RNVC: 2

11 Mar 1983

5340-15-117-4086
Fondello Per Cilind

151174086
D0466469: RNCC: 3 | RNVC: 2

6 Apr 1994

5340-15-109-6145
Shock Mount Pad

151096145
518484-01: RNCC: 3 | RNVC: 2

20 Sep 1991

5340-15-045-3825
Distanziale

150453825
796-12-37A: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-151-4458
Tirante

151514458
0-168442: RNCC: 3 | RNVC: 2
(241)A39630-168442: RNCC: 5 | RNVC: 2
1PA39630-168442: RNCC: 5 | RNVC: 2

29 May 2000

5340-15-115-2975
Upper Rest

151152975
518051820: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-061-2470
Electrical-Me Post

150612470
000200174100: RNCC: 5 | RNVC: 2
1200096-139100002: RNCC: 5 | RNVC: 2
000200174100: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-197-8804
Ghiera Conica Giran

151978804
VS.10.1614.144/A-C1: RNCC: 3 | RNVC: 2

24 May 2004

5340-15-058-6132
Rubber Bumper

150586132
503-10-0310C: RNCC: 5 | RNVC: 2
503-10-0310C: RNCC: 5 | RNVC: 9

10 Nov 1974

5340-15-166-4889
Tappo Da 30.

151664889
14329101: RNCC: 3 | RNVC: 2
14329101: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-205-7780
Assieme Contatto

152057780
182724055: RNCC: 3 | RNVC: 2
(241)A0199182724055: RNCC: 5 | RNVC: 2

3 Apr 2012

5340-15-160-9861
Lucchetto S&G

151609861
F720180591: RNCC: 2 | RNVC: 2

6 Oct 2000

5340-15-000-5795
Lifting Mast Hexago

150005795
C0090298: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-15-154-6091
Base (1) Per Sosteg

151546091
157618212: RNCC: 2 | RNVC: 3

26 Jul 2001

5340-15-120-5393
Dust And Moisture Seal Protective Cap

151205393
135165-1: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-187-6493

5340-15-139-2704
Lucchetto Mm.90

151392704
160-90: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-200-7084
Control Rod

152007084
42538430: RNCC: 3 | RNVC: 2
(241)A424942538430: RNCC: 5 | RNVC: 2

21 Feb 2006

5340-15-116-2302
Handwheel

151162302
190523102: RNCC: 3 | RNVC: 2

30 Mar 1993

5340-15-181-6223
Ruota In Gomma Mm.1

151816223
531104: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-114-7558
Adaptor Lif

151147558
01TL20431: RNCC: 3 | RNVC: 2

4 Aug 1992

5340-15-142-3092
Rubber Bumper

151423092
RUBBER55X57MM: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-137-1515
Fascetta

151371515
147155: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-204-4931
Spring Buckle

152044931
42563575: RNCC: 3 | RNVC: 2
CV179209A: RNCC: 5 | RNVC: 2
7118851: RNCC: 5 | RNVC: 2

7 Nov 2011

5340-15-068-0562
Mobile Sup Plate

150680562
00-3563-00: RNCC: 3 | RNVC: 2

15 May 1985

5340-15-189-6823
Cap Assy

151896823
434A2084-401: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-009-2159
Molla A Lamina

150092159
212-5210-09-5: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-115-5568
Gancio Attacco Stri

151155568
219AE0078-1: RNCC: 3 | RNVC: 2

5 Dec 1992

5340-15-232-1126
Tirante

152321126
A.0102700: RNCC: 3 | RNVC: 2
534015E065974: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-103-2050
Forcella Speciale

151032050
DE160.02.195: RNCC: 3 | RNVC: 2

2 Oct 1987

5340-15-006-2730
Piastra Speciale

150062730
0-33998: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-151-7093
Staffa

151517093
0-178933: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-001-0274
Nut And Bolt Locking Plate

150010274
J57151844-007: RNCC: 3 | RNVC: 2

15 May 2013

5340-15-148-3532
Double Angle Bracket

151483532
156538: RNCC: 3 | RNVC: 2

29 Jul 1998

5340-15-040-2342
Molla A Torsione

150402342
2-3303-2-01-28130-4: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-007-1162
Headless Straight Rod

150071162
BG165-31: RNCC: 3 | RNVC: 2
491.813: RNCC: 5 | RNVC: 2

1 Aug 1979

5340-15-137-1442
Morsetto

151371442
45C26-16-18: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-045-0881
Forcella

150450881
506-31-01-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-149-2635
Spec Assieme Tappo

151492635
PLGA1250010: RNCC: 3 | RNVC: 2

26 Jan 1999

5340-15-201-4695
An Bracket Assembly

152014695
4148T64G01: RNCC: 3 | RNVC: 2
(241)A34604148T64G01: RNCC: 5 | RNVC: 2

26 Sep 2006

5340-15-100-1678
Forcella Estremita

151001678
39A510-12-31A: RNCC: 3 | RNVC: 2

20 Jan 1987

5340-15-217-5598
Moschettone A Occhi

152175598
EXRI7904493: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-154-6254
Base (1) Per Sosteg

151546254
157631233: RNCC: 2 | RNVC: 3

31 Jul 2001

5340-15-150-9336
Turnbuckle

151509336
850.954.00: RNCC: 3 | RNVC: 2

9 Feb 2000

5340-15-118-2844
Piastra Chiusura Ca

151182844
D0485472: RNCC: 3 | RNVC: 2

20 Apr 1995

5340-15-211-8772
Pannello Con Panno

152118772
NB2002: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-172-0573
Lucchetto Cisa Mm.4

151720573
LUCCHETTO CISA MM.40: RNCC: 1 | RNVC: 2

1 Jun 2003

5340-15-152-3250
Double Angle Bracket

151523250
0-115790: RNCC: 3 | RNVC: 2

31 Aug 2000

5340-15-006-2394
Leva Speciale

150062394
0-21105: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-105-5961
Staffa A Gomito

151055961
1367932: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-123-7099
Morsetto A Mano In

151237099
3330/2-62: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-105-8937
Tirante A Teste Fil

151058937
9920675: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-060-9453
Rim Clen Clamp (1)

150609453
F304C3B13: RNCC: 3 | RNVC: 2
F304C3B-13: RNCC: 5 | RNVC: 2
F304C3B-13: RNCC: 5 | RNVC: 2

22 May 1977

5340-15-115-7083
Headless Grooved Rod

151157083
D0489283: RNCC: 3 | RNVC: 2

14 Mar 1994

5340-15-062-0670
Hinge

150620670
P-882741-003: RNCC: 3 | RNVC: 2
P882741-003: RNCC: 5 | RNVC: 2

27 Oct 1980

5340-15-101-2995
Hinge Half

151012995
P-135207-003: RNCC: 3 | RNVC: 2
P135207-003: RNCC: 5 | RNVC: 2

30 Jan 1988

5340-15-120-6030
Asta Speciale

151206030
309-5921-00: RNCC: 3 | RNVC: 2

10 Jul 1995

5340-15-204-9585
Riduzione

152049585
108000000178: RNCC: 3 | RNVC: 2
(241)AK137108000000178: RNCC: 5 | RNVC: 2

2 Feb 2012

5340-15-051-3726
Molla

150513726
9913193: RNCC: 3 | RNVC: 2
9913193: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-009-7124
Cover Plate Access

150097124
1236-15-117: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-100-2509
Intermally Rod End

151002509
39X1151-12: RNCC: 3 | RNVC: 2

9 Feb 1987

5340-15-112-7818
Levier

151127818
IR302-56: RNCC: 3 | RNVC: 2
IR302-56: RNCC: 3 | RNVC: 2
IR30256: RNCC: 3 | RNVC: 2
(7001)5340151127818: RNCC: 5 | RNVC: 2
91629181: RNCC: 5 | RNVC: 2
27501: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-002-3691
Stand Base

150023691
369-09071-108: RNCC: 3 | RNVC: 2

20 Aug 2013

5340-15-110-2897
Bracket Fue

151102897
P120086-001: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-215-4257
Gancio (Portata T.2

152154257
422L: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-008-0798
Metal Runner

150080798
60112211: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-214-0904
Inserto A Croce Fre

152140904
F3001: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-139-2752
Staffa

151392752
MA 5/1: RNCC: 3 | RNVC: 2
MA 5/1: RNCC: 5 | RNVC: 9

10 Oct 1996

5340-15-151-5487
Dashpot

151515487
960882: RNCC: 3 | RNVC: 2

7 Jun 2000

5340-15-139-3229
Tirante

151393229
1390319: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-187-1459
Webbing Strap

151871459
1748-02-013: RNCC: 3 | RNVC: 2
14100004641: RNCC: 5 | RNVC: 2

19 Feb 2009

5340-15-107-2070
Rim Clen Clamp (1)

151072070
104CA060-1: RNCC: 3 | RNVC: 2

1 Mar 1988

5340-15-137-2468
Fermaglio

151372468
769054-4: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-166-4856
Montante Centrale P

151664856
035719226: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-142-7254
Anodo

151427254
AT1293 A.F.25: RNCC: 3 | RNVC: 2

9 Jun 1997

5340-15-187-2291
Assieme Sportello E

151872291
A4762: RNCC: 3 | RNVC: 2
(241)A7904A4762: RNCC: 5 | RNVC: 2

26 Feb 2009

5340-15-231-6335
Piastra Sx

152316335
0-122249: RNCC: 3 | RNVC: 2
534015E103939: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-220-0660
Rinforzo Pedino Per

152200660
S1-143K: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-212-2156
Tasselli

152122156
SBN9-8: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-203-1924
Support

152031924
12HJ04343435S01-403: RNCC: 3 | RNVC: 2

28 Nov 2007

5340-15-115-5439
Piastra Collegament

151155439
D0469672: RNCC: 3 | RNVC: 2

22 Mar 1994

5340-15-120-7092
Headless Straight Rod

151207092
555-42-0140: RNCC: 3 | RNVC: 2
555542014000: RNCC: 3 | RNVC: 2

27 Jan 2004

5340-15-117-8480
Blochet

151178480
B630-01: RNCC: 3 | RNVC: 2

28 Jan 1994

5340-15-166-5234
Protective Cap

151665234
NAS816322: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-152-7355
Shock Mount Pad

151527355
80540: RNCC: 3 | RNVC: 2
(241)A333480540: RNCC: 4 | RNVC: 1
9054T0: RNCC: 5 | RNVC: 2

19 Oct 2000

5340-15-103-6262
Rim Clen Clamp (1)

151036262
3136T0062A: RNCC: 3 | RNVC: 2
21360062A: RNCC: 3 | RNVC: 2
(241)A361821360062A: RNCC: 4 | RNVC: 1

19 Sep 1995

5340-15-152-6695
Piastrina

151526695
0-111301: RNCC: 3 | RNVC: 2

10 Oct 2000

5340-15-151-7087
Staffa

151517087
0-177541: RNCC: 3 | RNVC: 2

3 Jul 2000

5340-15-115-9907
Anchor Strap

151159907
14116: RNCC: 3 | RNVC: 2

10 Jan 1995

5340-15-066-3251
Plug

150663251
AT19994-400: RNCC: 3 | RNVC: 2

23 May 1986

5340-15-148-9426
Anello Raschiaolio

151489426
PNE301018-004: RNCC: 3 | RNVC: 2

5 Nov 1998

5340-15-063-9221
Fascetta Speciale

150639221
9-3630-32: RNCC: 3 | RNVC: 2

6 Dec 1982

5340-15-154-3708
Sportello Accesso

151543708
212-1200-19-37: RNCC: 3 | RNVC: 2

10 May 2001

5340-15-149-6118
Frame

151496118
518-38-1030: RNCC: 3 | RNVC: 2

1 Apr 1999

5340-15-154-7919
Pipe Bracket

151547919
17316990: RNCC: 3 | RNVC: 2
1PA424917316990: RNCC: 3 | RNVC: 2
(241)A424917316990: RNCC: 5 | RNVC: 2

26 Sep 2001

5340-15-221-0681
Chiavi Grezze

152210681
CORBIN 85: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-066-4122
Serratura Complessi

150664122
68-103136-811: RNCC: 3 | RNVC: 2

25 Oct 1985

5340-15-111-5928
Holder

151115928
A05628-01-25: RNCC: 3 | RNVC: 2
A05628-01-25: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-062-8802
Anello Speciale

150628802
0-42651: RNCC: 3 | RNVC: 2

9 Feb 1982

5340-15-139-7107
Staffa Fissaggio

151397107
A.0150900: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-237-4995
Ruota Con Piastra F

152374995
LAATRUBPF10030: RNCC: 3 | RNVC: 2
534015E033653: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-100-5838
Pattino Superiore E

151005838
DOA0119718: RNCC: 3 | RNVC: 2

7 Mar 1994

5340-15-102-3214
Suding Pad

151023214
5.373.076: RNCC: 3 | RNVC: 2

19 Jul 1988

5340-15-122-9457
Storage Plug

151229457
NOR385-10: RNCC: 3 | RNVC: 2
NOR385-10: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-155-8875
Sostegno Elastico

151558875
MP-DNP-40: RNCC: 3 | RNVC: 2

13 Sep 2002

5340-15-112-9717
Passacavospeciale

151129717
129-0041-42-101: RNCC: 3 | RNVC: 2

13 Dec 1989

5340-15-127-4137
Dischetto Chiusura

151274137
1483-88-080: RNCC: 3 | RNVC: 2
1483-88-080: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-174-7624
Nastro Rame 24X0.1

151747624
55210-43/137: RNCC: 3 | RNVC: 2

2 Oct 2003

5340-15-007-5226
Cover Plate Access

150075226
1239-01-183: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-168-9409
Padlock

151689409
F72001543: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-124-2672
Tappo Da 30.

151242672
14329101: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-147-5787
Nippel

151475787
98NI987: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-235-4361
Cilindro Per Serrat

152354361
60022220: RNCC: 3 | RNVC: 2
EOD TOOL KIT: RNCC: 3 | RNVC: 2
534015E004360: RNCC: 5 | RNVC: 9

27 Aug 2007

5340-15-156-3360
Trasportatore

151563360
(241)A3460CBD71226P01: RNCC: 3 | RNVC: 2
CBD71226P01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-151-6946
Mensola

151516946
0-171804: RNCC: 3 | RNVC: 2

30 Jun 2000

5340-15-176-6149
Fascetta Meb Mm12 1

151766149
MEB12MM16X27: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-152-3816
Flangia

151523816
42103399: RNCC: 3 | RNVC: 2
0-111468: RNCC: 5 | RNVC: 2
42103399: RNCC: 5 | RNVC: 2

6 Sep 2000

5340-15-152-3443
Chiavistello

151523443
9505783: RNCC: 3 | RNVC: 2
0-119747: RNCC: 5 | RNVC: 2
9505783: RNCC: 5 | RNVC: 2

4 Sep 2000

5340-15-057-6430
Dust And Moisture Seal Protective Cap-Plug

150576430
600507: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-136-0023
Ammortizzatore

151360023
CTR45-14928: RNCC: 3 | RNVC: 2
CTR45-14928: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-218-2505
Lucchetto Stelo Lun

152182505
802407: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-127-2168
Molla

151272168
1406-43-033: RNCC: 3 | RNVC: 2
1406-43-033: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-180-4278
Support Assembly

151804278
205-1600-15-102: RNCC: 3 | RNVC: 2
(241)A0126205-1600-15-102: RNCC: 5 | RNVC: 2

20 May 2008

5340-15-212-5080
Staffa Snodata

152125080
MB65: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-112-8235
Supportopera

151128235
466473: RNCC: 3 | RNVC: 2
D0466473: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-104-4326
Testa Tira Forcella

151044326
652007: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-156-3587
Dust Protective Cap

151563587
(241)A3460CBD71081P01: RNCC: 3 | RNVC: 2
CBD71081P01: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-155-8466
Fondello Superiore

151558466
D0484598: RNCC: 3 | RNVC: 2

2 Aug 2002

5340-15-118-4536
Ape Coperchio Piano

151184536
60148517: RNCC: 3 | RNVC: 2

1 Jun 1994

5340-15-214-3206
Maniglia

152143206
TK858386: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-1583
Dust Cover

151151583
05/739/005: RNCC: 5 | RNVC: 2
05/739/005: RNCC: 5 | RNVC: 9
05/739/005: RNCC: 5 | RNVC: 9

29 Nov 1992

5340-15-166-4936
Tassello Mm. 6

151664936
364006: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-153-6998
Forcella Testa Di T

151536998
121202382: RNCC: 3 | RNVC: 2

22 Feb 2001

5340-15-125-3968
Clamp

151253968
A-1040901-105: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-148-7713
Profilato A Forma S

151487713
109-0361-10-30: RNCC: 3 | RNVC: 2

1 Oct 1998

5340-15-114-7157
Control Rod

151147157
03-619-B-14: RNCC: 1 | RNVC: 3
(7001)5340151147157: RNCC: 3 | RNVC: 2
52986: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-15-200-5899
Dust And Moisture Seal Protective Cover

152005899
1864-168: RNCC: 3 | RNVC: 2
(241)A00761864-168: RNCC: 5 | RNVC: 2

1 Feb 2006

5340-15-174-7313
Axis Handwheel

151747313
825-4012-324: RNCC: 3 | RNVC: 2
M0016948: RNCC: 5 | RNVC: 2

2 Oct 2003

5340-15-116-8500
Piastra Con Tappi

151168500
D1302614: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-116-8610
Anello Rasamento Co

151168610
D0469513: RNCC: 3 | RNVC: 2

8 Apr 1994

5340-15-008-3757
Resilient Mount

150083757
2532404: RNCC: 3 | RNVC: 2

27 Mar 1981

5340-15-148-0464
Tubular Fairlead Half

151480464
101392: RNCC: 3 | RNVC: 2

16 Jun 1998

5340-15-110-8409
Helical Compression Spring Seat

151108409
773221: RNCC: 3 | RNVC: 2

23 Oct 1988

5340-15-116-8509
Pompa A B Fondello

151168509
D0469511: RNCC: 3 | RNVC: 2

23 Feb 1994

5340-15-144-7960
Resilient Mount

151447960
VB-TSZ-1-65-70SH: RNCC: 3 | RNVC: 2

24 Jan 1997

5340-15-045-3639
Fascetta

150453639
753-12-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-045-2861
Distanziale

150452861
796-12-37: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-115-8763
Plate

151158763
71-26-002-113: RNCC: 3 | RNVC: 2
281535P1: RNCC: 3 | RNVC: 2

1 Feb 1993

5340-15-205-2102
Braccio Pieghevole

152052102
(241)AA136221-7531: RNCC: 3 | RNVC: 2
AA136221-7531: RNCC: 3 | RNVC: 2
221-7531: RNCC: 3 | RNVC: 2
(241)AA136(241)AA136221-7531: RNCC: 5 | RNVC: 2
2217531: RNCC: 5 | RNVC: 3
492015E142440: RNCC: 5 | RNVC: 9

27 Feb 2012

5340-15-109-8249
Gancio

151098249
68-600174-053: RNCC: 3 | RNVC: 2

21 Mar 1990

5340-15-000-5783
Support Unit Side S

150005783
C0090285: RNCC: 3 | RNVC: 2

20 Mar 2013

5340-15-054-3330
Staffa Sostegno Tub

150543330
526734: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-153-7671
Base (1) Per Sosteg

151537671
01830H118200: RNCC: 5 | RNVC: 2
T0064217: RNCC: 5 | RNVC: 2
01830H118200: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-178-9967
Plate Assembly

151789967
RS 407 414 -U: RNCC: 3 | RNVC: 2

10 Mar 2006

5340-15-055-1145
Fascetta Stringitub

150551145
62053: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-119-5394
Coperchio Carenato

151195394
D0481646: RNCC: 3 | RNVC: 2

24 Mar 1995

5340-15-005-5199
Insertselflocking

150055199
2,5-045CN3,75SL: RNCC: 3 | RNVC: 2

9 Dec 2013

5340-15-109-3613
Turnbuckle

151093613
OP-13.32: RNCC: 3 | RNVC: 2

16 Oct 1989

5340-15-050-4551
Portamolla Sicura

150504551
04-072-019: RNCC: 3 | RNVC: 2
78859: RNCC: 3 | RNVC: 2
(241)A017878859: RNCC: 5 | RNVC: 2
(7001)1005150504551: RNCC: 5 | RNVC: 2

30 Jun 1999

5340-15-110-2228
Traversadisupporto

151102228
23163-105B00: RNCC: 3 | RNVC: 2

17 Jul 1990

5340-15-201-0535
Mating Element

152010535
315P6630-00: RNCC: 3 | RNVC: 2

16 May 2006

5340-15-155-4642

5340-15-068-4369
Maniglia Speciale

150684369
SH 3884-402: RNCC: 3 | RNVC: 2

9 Oct 1986

5340-15-200-9346
Electronic Equipment Hardware Kit

152009346
1SDA050754R1: RNCC: 3 | RNVC: 2

18 Apr 2006

5340-15-102-7195
Nut And Bolt Locking Plate

151027195
79025699: RNCC: 3 | RNVC: 2

27 Oct 1985

5340-15-166-5198
Lucchetto In Ottone

151665198
2201030: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-123-1407
Staffa

151231407
9060126: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-060-1735
Staffa Di Fissaggio

150601735
FL0061-100: RNCC: 3 | RNVC: 2

1 Feb 1977

5340-15-220-2401
Tassello Fischer Co

152202401
SB12-4-GS: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-061-2076
Rim Clen Clamp (1)

150612076
000200062500: RNCC: 5 | RNVC: 2
000200062500: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-101-2918
Strettoio Chiusura

151012918
677624-3/1: RNCC: 3 | RNVC: 2

28 Jul 1986

5340-15-105-6009
Staffa A Gomito

151056009
8961622: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-151-8109
Dust And Moisture Seal Boot

151518109
0-120155: RNCC: 3 | RNVC: 2

13 Jul 2000

5340-15-217-6878
Scalpello A Muro

152176878
170000000194: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-166-4887
Pistone A Gas

151664887
0062AAG001: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-116-0258
Coperchio

151160258
04.2579.003: RNCC: 3 | RNVC: 2

16 Sep 1993

5340-15-127-6504
Piastrina Di Protez

151276504
833348: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-152-7108
Stelo

151527108
D1401304: RNCC: 3 | RNVC: 2

18 Oct 2000

5340-15-102-9969
Control Rod

151029969
79005182: RNCC: 3 | RNVC: 2

21 Jun 1987

5340-15-215-3946
Chiodini Per Cavo 2

152153946
CHIODINIXCAVO: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-006-7618
Clamp Loop

150067618
122322-2: RNCC: 3 | RNVC: 2

24 Nov 1979

5340-15-192-1313
Yoke End

151921313
2-4-411: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-051-4854
Dust And Moisture Seal Protective Cap

150514854
A30539-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-155-4872
Base S Adapter Assy

151554872
CBD71189G01: RNCC: 3 | RNVC: 2

27 Mar 2002

5340-15-170-8196
Piastrina Recupero

151708196
340-1005/05.01: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-101-2936
Speciale Strettoio

151012936
6776517-10: RNCC: 3 | RNVC: 2

24 Jul 1986

5340-15-134-4100
Cerniera Sinistra

151344100
13895-001A1: RNCC: 3 | RNVC: 2
13895-001A1: RNCC: 5 | RNVC: 9

9 Oct 1996

5340-15-155-8995
Plate

151558995
006A0165-003: RNCC: 3 | RNVC: 2

16 Sep 2002

5340-15-127-3513
Anello

151273513
815544: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-074-4104
Turnbuckle

150744104
1C30UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-111-5871
Guide

151115871
A12182-01-20: RNCC: 3 | RNVC: 2
A12182-01-20: RNCC: 5 | RNVC: 2

7 Sep 1989

5340-15-213-4549
Fibbia Per Nastro M

152134549
FIBBIAMM25: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-005-6126
Asta Fine Corsa Spe

150056126
0-10398: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-120-6768
Supporto Carenatura

151206768
D1401535: RNCC: 3 | RNVC: 2

29 Jun 1996

5340-15-061-3817
Supporto Angolare S

150613817
P36HB5: RNCC: 5 | RNVC: 2
P36HB5: RNCC: 5 | RNVC: 9

22 Sep 1977

5340-15-074-4409
Telephone Coil (1)

150744409
2A22UNI2021AQ34-673ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-210-2637
Giunto Stagno Per T

152102637
MST32: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-103-6261
Rim Clen Clamp (1)

151036261
3136T0061A: RNCC: 3 | RNVC: 2
21360061A: RNCC: 3 | RNVC: 2
(241)A361821360061A: RNCC: 4 | RNVC: 1

19 Sep 1995

5340-15-219-8587
Disco A Strappo Dia

152198587
115 GR 80: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-127-5950
Molla Sospensione A

151275950
983619: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-215-3730
Lucchetto Acciaio M

152153730
28050: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-220-0663
Telaio Fin. Angolar

152200663
S1-143E: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-062-0655
Hinge

150620655
P882739-001: RNCC: 3 | RNVC: 2

27 Oct 1980

5340-15-042-2080
Supporto Antivibran

150422080
U814: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-063-6283
Nut And Bolt Locking Plate

150636283
4747108: RNCC: 3 | RNVC: 2

15 Oct 1982

5340-15-149-2461
Anodo Sacrificale

151492461
TIPO A2: RNCC: 3 | RNVC: 2

1 Feb 1999

5340-15-104-8883
Fissaggio Gaffetta

151048883
593101: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-132-9300
Graffetta

151329300
1-45752-80: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-200-3123
Flangia Per Tenuta

152003123
J59061315: RNCC: 3 | RNVC: 2

29 Nov 2005

5340-15-103-1911
Piastrina

151031911
DE013.12.908: RNCC: 3 | RNVC: 2
(241)A5015DE013.12.908: RNCC: 5 | RNVC: 2

2 Oct 1987

5340-15-189-5550
Ammortizzatore

151895550
V168-2: RNCC: 3 | RNVC: 2

26 Feb 2010

5340-15-195-6776
Confezione Staffe R

151956776
STAFFERADIATORE: RNCC: 3 | RNVC: 2
(241)AD445STAFFERADIATORE: RNCC: 5 | RNVC: 2

19 Apr 2011

5340-15-064-2025
Electronic Equipment Hardware Kit

150642025
RH4/AR76 INST: RNCC: 3 | RNVC: 2

23 Jan 1984

5340-15-108-8419
Turnbuckle Body

151088419
04419B-1: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-058-4754
Snap Hook

150584754
4-02305: RNCC: 3 | RNVC: 2

9 Feb 1977

5340-15-153-8143
Morsetto (1) A Serr

151538143
06100A106660: RNCC: 5 | RNVC: 3
06100A106660: RNCC: 5 | RNVC: 9

1 Mar 2001

5340-15-158-5236
Striscia

151585236
451A1015-001: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-179-3216
Utility Resilient Mount

151793216
H95-216-100-115-8: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-122-3001
Anneau De Commandes

151223001
79005601: RNCC: 3 | RNVC: 2
79005601: RNCC: 5 | RNVC: 2

25 Jun 1996

5340-15-007-9940
Dust And Moisture Seal Protective Cap-Plug

150079940
4697660: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-206-7858
Bracket

152067858
4232262-00: RNCC: 3 | RNVC: 2

20 Jul 2012

5340-15-040-2674
Forcella

150402674
2-6843-100-27050: RNCC: 3 | RNVC: 2
2-6843-1-00-27050: RNCC: 5 | RNVC: 2

1 Jan 1974

5340-15-008-1467
Cover Plate Access

150081467
0-05645: RNCC: 3 | RNVC: 2

9 Jun 1981

5340-15-209-3956
Confezione Fascette

152093956
2,5X160: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-191-7596
Sonda Passacavi Tec

151917596
TD0630: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-106-0403
Colonnetta

151060403
22699: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-113-2489
Staffacomplessivo

151132489
345A4276-401: RNCC: 3 | RNVC: 2

11 Apr 1991

5340-15-135-7122
Control Rod

151357122
8583269: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-145-0425
Cap Adapter

151450425
324C01660-101: RNCC: 3 | RNVC: 2

28 Mar 1997

5340-15-153-0995
Tappo

151530995
9CD1741A502-001: RNCC: 3 | RNVC: 2

21 Nov 2000

5340-15-008-3227
Resilient Mount

150083227
CB1380-20-C2: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-195-1614

5340-15-175-7007
Serratura Yale

151757007
SESY-50: RNCC: 3 | RNVC: 2

14 Feb 2004

5340-15-148-2813
Assieme Tappo

151482813
PNE208002-001: RNCC: 3 | RNVC: 2

20 Jul 1998

5340-15-202-8440
Manual Control Lever

152028440
9.3040.0378.A: RNCC: 3 | RNVC: 2
(241)A92169.3040.0378.A: RNCC: 5 | RNVC: 2

23 Jul 2007

5340-15-104-8865
Fissaggio Gaffetta

151048865
10419001: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-065-3651
Bracket

150653651
C01-1100-203: RNCC: 3 | RNVC: 2

10 Jun 1985

5340-15-152-1513
Staffetta Fiss. Cav

151521513
4886060: RNCC: 3 | RNVC: 2

8 Aug 2000

5340-15-050-0035
Inserto Candela

150500035
66796P10: RNCC: 3 | RNVC: 2

31 Dec 1975

5340-15-121-5877
Resilient Mount

151215877
ADF7603: RNCC: 3 | RNVC: 2

24 Jun 1999

5340-15-112-1379
Staffaperr

151121379
DE013.14.369: RNCC: 3 | RNVC: 2

12 Feb 1991

5340-15-102-1034
Bloccastrallo

151021034
193-0487/19: RNCC: 3 | RNVC: 2

22 Jun 1986

5340-15-111-4659
Blocchetto Completo

151114659
C7260-W11-B1: RNCC: 3 | RNVC: 2
C7260-W11-B1: RNCC: 5 | RNVC: 2
C7260-W11-B1: RNCC: 5 | RNVC: 9

16 Jan 1991

5340-15-150-3887
Dust And Moisture Seal Protective Cap

151503887
A6501/18: RNCC: 3 | RNVC: 2

2 Dec 1999

5340-15-005-6976
Coperchio Speciale

150056976
0-33845: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-103-6654
Staffa Per Supporto

151036654
24009226A: RNCC: 3 | RNVC: 2

26 Nov 1987

5340-15-068-2644
Catenaccio

150682644
CF 201 800 A: RNCC: 3 | RNVC: 2
CF 201 800 B: RNCC: 5 | RNVC: 2

27 Oct 1984

5340-15-215-3477
Chiusura A Scatto

152153477
ART.633: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-005-6518
Supporto Speciale

150056518
0-30559: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-213-8772
Paletto Quadro Da S

152138772
PALETTO300MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-105-8949
Tirante A Teste Fil

151058949
9920674: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-127-4852
Staffetta Fiss.Tubo

151274852
856294: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-113-2674
Supporto Bilancieri

151132674
06.549: RNCC: 3 | RNVC: 2
06.549: RNCC: 3 | RNVC: 2

19 Jun 1991

5340-15-051-9846
Resilient Mount

150519846
7725473: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-156-2131
Lay-By Stand

151562131
(241)A3460CBD71066P01: RNCC: 3 | RNVC: 2
CBD71066P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-212-6917
Lucchetto Corazzato

152126917
28550-75: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-115-1971
Cylinder Front Duct

151151971
560-5066-083: RNCC: 3 | RNVC: 2
82-00675: RNCC: 5 | RNVC: 2

29 Nov 1992

5340-15-055-3725
Guarnizione Special

150553725
N3729-3: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-156-2056
Flange

151562056
(241)A3460CBD71204P01: RNCC: 3 | RNVC: 2
CBD71204P01: RNCC: 3 | RNVC: 2

12 Dec 2002

5340-15-124-3829
Prolunga Lunghezza

151243829
360.015: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-204-2615
Braccio Pieghevole

152042615
ARM/LCD.1114: RNCC: 3 | RNVC: 2
(241)A3028ARM/LCD.1114: RNCC: 5 | RNVC: 2

13 Oct 2011

5340-15-002-4870
Molla Per Ruttore

150024870
T6-139: RNCC: 3 | RNVC: 2
T6-139: RNCC: 5 | RNVC: 9

1 Jan 1974

5340-15-210-7031
Filetto Riportato 5

152107031
512404: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-218-1496
Sonda Tirafili Mt.2

152181496
GW52406: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-137-6087
Tassello In Nylon M

151376087
S10V0205: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-152-6764
Piastra

151526764
0-151862: RNCC: 3 | RNVC: 2

10 Oct 2000

5340-15-105-6019
Staffa A Gomito

151056019
4066303: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-5978
Staffa A Gomito

151055978
8532060: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-115-3304
Handle

151153304
A81021-57-22: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-001-8441
Unavailable

150018441
ED00613R0760-S: RNCC: 3 | RNVC: 2
ED00613R0760-S: RNCC: 5 | RNVC: 2
CV173838: RNCC: 5 | RNVC: 2

16 Jul 2013

5340-15-005-6973
Coperchio Speciale

150056973
0-33800: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-154-6049
Base (1) Per Sosteg

151546049
157608182: RNCC: 2 | RNVC: 3

26 Jul 2001

5340-15-139-7056
Anello

151397056
A.0007330: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-205-7086
Piastra Raccordi

152057086
5387.PM.01.0353: RNCC: 3 | RNVC: 2
DE004.02.992: RNCC: 3 | RNVC: 2
(241)A53875387.PM.01.0353: RNCC: 5 | RNVC: 2

28 Mar 2012

5340-15-133-4527
Escutcheon Plate

151334527
4386716: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-005-9953
Anello Elastico Sic

150059953
0377305: RNCC: 3 | RNVC: 2
0377305: RNCC: 5 | RNVC: 9

11 Aug 1979

5340-15-074-4360
Turnbuckle

150744360
1C52UNI2020A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-062-8425
Maniglia Speciale

150628425
204-4610-47-1: RNCC: 3 | RNVC: 2

1 Jun 1987

5340-15-007-3462
Fascetta Speciale

150073462
0-30896: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-170-0449
Lucchetto A Combin.

151700449
F72021022: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-191-8983
Lucchetto Da 50Mm A

151918983
117-50: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-179-5587
Barrel

151795587
294207-10: RNCC: 3 | RNVC: 2

2 Mar 2007

5340-15-103-3478
Pad Eye

151033478
R98646: RNCC: 3 | RNVC: 2

17 Dec 1987

5340-15-115-2799
Lever

151152799
518052880: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-156-3352
Removal Drift Assy

151563352
(241)A3460CBD71244G01: RNCC: 3 | RNVC: 2
CBD71244G01: RNCC: 3 | RNVC: 2

29 Jan 2003

5340-15-205-3043
Index

152053043
112761226: RNCC: 3 | RNVC: 2

1 Mar 2012

5340-15-114-7235
Helical Compression Spring Seat

151147235
03-619-B-57: RNCC: 1 | RNVC: 3
(7001)5340151147235: RNCC: 3 | RNVC: 2
55954: RNCC: 3 | RNVC: 2

29 Jul 1992

5340-15-188-1180
Door Latch

151881180
90168-001: RNCC: 3 | RNVC: 2

14 Jul 2009

5340-15-127-4295
Molla Leva A Mano C

151274295
841605: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-135-3771
Attacco

151353771
43H10-4-625-7: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-122-3900
Headless Straight Rod

151223900
D1403067: RNCC: 3 | RNVC: 2

20 Jun 2000

5340-15-112-8418
Premig

151128418
466707: RNCC: 3 | RNVC: 2
D0466707: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-112-0439
Piastrina Speciale

151120439
275A0102-405: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-127-5901
Anello

151275901
978832: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-118-1942
Resilient Mount

151181942
4230733: RNCC: 3 | RNVC: 2
4230733: RNCC: 5 | RNVC: 2
60173430: RNCC: 5 | RNVC: 2

22 Apr 1994

5340-15-007-2764
Staffa A Gomito

150072764
1388338: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-166-5025
Pillar

151665025
83472710: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-105-6382
Collare Serraggio

151056382
10450290: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-110-5203
Gland

151105203
641.974: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-166-5218
Gear

151665218
1303331: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-020-2493
Dust And Moisture Seal Protective Plug

150202493
01-097-01-79: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-168-9776
Padlock

151689776
F72003816: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-112-0428
Dispositivo Di Supp

151120428
275A0515-401: RNCC: 3 | RNVC: 2

14 Feb 1991

5340-15-136-5461
Forcella Estremita'

151365461
212-076-149-1: RNCC: 3 | RNVC: 2

24 Sep 1998

5340-15-104-8854
Fissaggio Gaffetta

151048854
10442190: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-103-2576
Manual Contr Handle

151032576
052899: RNCC: 3 | RNVC: 2

11 Jan 1989

5340-15-153-7706
Dust Protective Cap

151537706
NOR497-20: RNCC: 3 | RNVC: 2
NOR497-20: RNCC: 5 | RNVC: 9

27 Feb 2001

5340-15-152-7107
Flangia

151527107
D1401302: RNCC: 3 | RNVC: 2

18 Oct 2000

5340-15-153-1591
Anello Di Fermo

151531591
W020859: RNCC: 3 | RNVC: 2

7 Dec 2000

5340-15-166-4854
Rondella

151664854
4734221: RNCC: 3 | RNVC: 2
4734221: RNCC: 5 | RNVC: 9

1 Nov 2002

5340-15-005-3425
Electrical-Me Post

150053425
7464305D: RNCC: 3 | RNVC: 2

16 Sep 1980

5340-15-120-6984
Strozzatore Per Dis

151206984
D0491213: RNCC: 3 | RNVC: 2

4 Jul 1996

5340-15-194-7811
Supporto Pompa A Ma

151947811
50439: RNCC: 3 | RNVC: 2
(241)A348850439: RNCC: 5 | RNVC: 2

14 Jan 2011

5340-15-006-2540
Raschiatore Special

150062540
0-33763: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-114-7331
Cannotto Scanalato

151147331
D0491101: RNCC: 3 | RNVC: 2

30 Jul 1992

5340-15-205-1988
Duct Protection Hig

152051988
CBD71453G01: RNCC: 3 | RNVC: 2
(241)A3460CBD71453G01: RNCC: 5 | RNVC: 2

24 Feb 2012

5340-15-108-6320
Dust And Moisture Seal Protective Cap-Plug

151086320
42046338: RNCC: 3 | RNVC: 2

30 Mar 1988

5340-15-193-6478
Quick Release Plunger

151936478
163110304: RNCC: 3 | RNVC: 2
GN. 37343: RNCC: 3 | RNVC: 2
(241)A0774GN.37343: RNCC: 5 | RNVC: 2
163110304: RNCC: 5 | RNVC: 2
(241)A0199163110304: RNCC: 5 | RNVC: 2

28 Jun 2010

5340-15-179-6421
Control Rod

151796421
98164349: RNCC: 3 | RNVC: 2

7 Jun 2007

5340-15-215-6159
Lucchetto Corazzato

152156159
LUCCHETTO86MM: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-102-3595
Snap Hook

151023595
3K41930100: RNCC: 3 | RNVC: 2

30 Jan 1988

5340-15-045-0015
Control Rod

150450015
1110: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-170-4848
Dust And Moisture Seal Protective Cap

151704848
3AL79226AA**: RNCC: 3 | RNVC: 2

3 Mar 2003

5340-15-001-5471
Pad Eye

150015471
182719571: RNCC: 3 | RNVC: 2

11 Jul 2013

5340-15-118-6104
Barbotin

151186104
73133070: RNCC: 3 | RNVC: 2

1 Jul 1994

5340-15-106-3265
Staffa

151063265
8531560: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-154-1741
Tappo Di Protezione

151541741
WW2: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-134-5932
Gancio Di Presa Per

151345932
3415: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-115-3096
Eqpt Rack Guides Se

151153096
100-0315/01: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-192-0327
Scrocco Regolabile

151920327
9508: RNCC: 3 | RNVC: 2

1 Mar 2010

5340-15-182-7988
Porta Chiave Traspo

151827988
009PCT: RNCC: 3 | RNVC: 2
201933: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-074-4187
Turnbuckle

150744187
1B6UNI2019A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-074-4388
Turnbuckle

150744388
266UNI2020ZNMANIC0TT00T: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-154-2143
Multiple Angle Bracket

151542143
0-167982: RNCC: 3 | RNVC: 2
(241)A39630-167982: RNCC: 5 | RNVC: 2
1PA39630-167982: RNCC: 5 | RNVC: 2

28 Mar 2001

5340-15-121-4028
Tappo Speciale

151214028
205-8110-09-3: RNCC: 3 | RNVC: 2

11 Dec 1995

5340-15-115-2948
Shock Absorber

151152948
781057: RNCC: 3 | RNVC: 2

29 Nov 1992

5340-15-115-9220
Tappoconanodo

151159220
60983 P18: RNCC: 3 | RNVC: 2

11 May 1996

5340-15-169-5723
Lucchetto Sg

151695723
F72015308: RNCC: 3 | RNVC: 2

5 Nov 2002

5340-15-006-2721
Piastrina Speciale

150062721
0-33968: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-105-5995
Staffa A Gomito

151055995
002.2761.0: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-211-3478
Accessorio Spellaca

152113478
7/01862: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-166-5081
Support Bracket

151665081
133478: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-193-1358
Cover

151931358
0026051100: RNCC: 3 | RNVC: 2

19 Apr 2010

5340-15-104-8884
Fissaggio Gaffetta

151048884
4555497: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-157-2459
Bronzina Minorata

151572459
DE160.03.428: RNCC: 3 | RNVC: 2
(241)A5015DE160.03.428: RNCC: 5 | RNVC: 2

9 Jun 2003

5340-15-181-0574
Sostegno Elastico

151810574
071340: RNCC: 3 | RNVC: 2
(241)A3593071340: RNCC: 5 | RNVC: 2

10 Oct 2008

5340-15-117-6320
Resilient Mount

151176320
AVAUD909: RNCC: 3 | RNVC: 2

16 May 1994

5340-15-118-3048
Rubber Bumper

151183048
142502929: RNCC: 3 | RNVC: 2

11 May 1994

5340-15-113-8699
Coperchio

151138699
1P 579846: RNCC: 3 | RNVC: 2
1P 579846: RNCC: 5 | RNVC: 9

13 Jun 1994

5340-15-105-8200
Sostegno Elastico

151058200
874984: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-155-4420
Frame Support Assy

151554420
CBD71047G01: RNCC: 3 | RNVC: 2

25 Mar 2002

5340-15-110-6350
Angle

151106350
P-050575-002: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-147-5157
Ritegno Per Sonda

151475157
20525-001: RNCC: 5 | RNVC: 2
20525-001: RNCC: 5 | RNVC: 9
20525-001: RNCC: 5 | RNVC: 9

12 Dec 1997

5340-15-100-5709
Specia Antivibrante

151005709
D0285710: RNCC: 3 | RNVC: 2
285710: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-196-9918
Padlock

151969918
PN UAS 00028243: RNCC: 3 | RNVC: 2
5340F76016601: RNCC: 5 | RNVC: 9

2 Apr 2004

5340-15-193-3796
Piastra Di Montaggi

151933796
504250171: RNCC: 3 | RNVC: 2
(241)A4249504250171: RNCC: 5 | RNVC: 2

11 May 2010

5340-15-230-8289
Fascetta

152308289
534015E136952: RNCC: 5 | RNVC: 9

19 Jul 2007

5340-15-155-2767
Resilient Mount

151552767
60174699: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-120-5570
Piastra Di Montaggi

151205570
109-0506-43-7: RNCC: 3 | RNVC: 2

28 Jun 1995

5340-15-009-6393
Telaio Portante

150096393
159276G1: RNCC: 3 | RNVC: 2

17 Oct 1980

5340-15-066-4985
Gancio Di Chiusura

150664985
B0024/R08: RNCC: 3 | RNVC: 2

1 Mar 1986

5340-15-007-9986
Helical Compression Spring Seat

150079986
548978: RNCC: 3 | RNVC: 2

22 Sep 1979

5340-15-002-1367
Webbing Strap

150021367
5801484117: RNCC: 3 | RNVC: 2

24 Jul 2013

5340-15-061-2471
Electrical-Me Post

150612471
000200104000: RNCC: 5 | RNVC: 2
1200096-13D000005: RNCC: 5 | RNVC: 2
000200104000: RNCC: 5 | RNVC: 9

17 May 1977

5340-15-067-7844
Cerniera

150677844
D4071-904: RNCC: 2 | RNVC: 2
D4071-904: RNCC: 5 | RNVC: 9

11 Feb 1986

5340-15-155-2929
Nottolino

151552929
60178668: RNCC: 3 | RNVC: 2

27 Feb 2002

5340-15-163-0834
Serie Prese Aria

151630834
PRESE ARIA G.E.ONAN 17.5MDKAE: RNCC: 3 | RNVC: 2

5 Jun 2002

5340-15-206-2926
Dust And Moisture Seal Protective Plug

152062926
58001: RNCC: 3 | RNVC: 2
58001: RNCC: 5 | RNVC: 2

1 Jun 2012

5340-15-105-2070
Rubber Bumper

151052070
845267: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-105-5956
Staffa A Gomito

151055956
4652838: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-156-4254
Cappuccio Di Protez

151564254
41105611: RNCC: 3 | RNVC: 2
41105611: RNCC: 5 | RNVC: 9

5 Feb 2003

5340-15-109-5309
Dust And Moisture Seal Protective Plug

151095309
GB488-009-000: RNCC: 3 | RNVC: 2

30 Jun 1999

5340-15-049-3514
Fascetta

150493514
7-4411-2-00-34802: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-117-4202
Turnbuckle

151174202
142514145: RNCC: 3 | RNVC: 2

4 Oct 1993

5340-15-051-3288
Rubber Bumper

150513288
826726: RNCC: 3 | RNVC: 2

1 Jan 1974

5340-15-068-7749
Cerniera Ass.

150687749
650854200: RNCC: 3 | RNVC: 2
8542: RNCC: 5 | RNVC: 2

30 Jan 1987

5340-15-170-6166
Flasque Avant

151706166
6102312095: RNCC: 3 | RNVC: 2

2 Apr 2003

5340-15-153-5168
Access Door

151535168
142010828: RNCC: 3 | RNVC: 2

7 Feb 2001

5340-15-221-7408
Serratura

152217408
5340RI0990177: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-156-3712
Assembling Plate

151563712
(241)A3460CBD71335P02: RNCC: 3 | RNVC: 2
CBD71335P02: RNCC: 3 | RNVC: 2

4 Feb 2003

5340-15-204-1854
Preassieme Barra

152041854
195531820: RNCC: 3 | RNVC: 2
(241)A0199195531820: RNCC: 5 | RNVC: 2

21 Sep 2011

5340-15-006-2556
Guida Speciale

150062556
0-28889: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-121-6303
Patin De Chaine

151216303
800035795: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-145-1033
Cerniera Assieme

151451033
99991179: RNCC: 3 | RNVC: 2

30 Apr 1997

5340-15-213-8829
Ancorante Per Ponte

152138829
77603D1200: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-170-8022
Piastra Forata

151708022
340-0244/02: RNCC: 3 | RNVC: 2

16 Jun 2003

5340-15-147-5807
T-Fitting

151475807
98RV981: RNCC: 3 | RNVC: 2

30 Dec 1997

5340-15-197-8787
Corona Giunto

151978787
PTA4621: RNCC: 3 | RNVC: 2

24 May 2004

5340-15-122-2197
Carter Moteur

151222197
800067628: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-118-0350
Coperchio In Lega

151180350
D0468059: RNCC: 3 | RNVC: 2

16 Nov 1994

5340-15-006-2418
Puntale Speciale

150062418
0-30570: RNCC: 3 | RNVC: 2

10 Apr 1979

5340-15-139-2698
Lucchetto Mm.94

151392698
AL 105: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-105-6337
Collare Serraggio

151056337
587451: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-127-3309
Staffetta Fissaggio

151273309
742637: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-124-9032
Lucchetto Viro

151249032
MM 50: RNCC: 3 | RNVC: 2
MM 50: RNCC: 5 | RNVC: 9

8 Oct 1996

5340-15-074-4449
Turnbuckle

150744449
1C8UNI20210T60-2012A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-066-5341
Giunto Elastico

150665341
88116613: RNCC: 2 | RNVC: 2

1 Apr 1998

5340-15-125-6690
Clamp

151256690
CE14383C4: RNCC: 3 | RNVC: 2

8 Oct 1996

5340-15-213-8897
Kit Collegamento St

152138897
GS2296: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-064-7012
Bracket

150647012
A-125112-001: RNCC: 3 | RNVC: 2
A125112-001: RNCC: 5 | RNVC: 2

10 Jun 1984

5340-15-182-6705
Tirafondo

151826705
TIRAFONDO5X12: RNCC: 3 | RNVC: 2

30 Dec 2008

5340-15-179-3143
Padlock

151793143
26022-50: RNCC: 3 | RNVC: 2

16 Oct 2006

5340-15-166-5016
Rh Hinge Half

151665016
113A6032702: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-198-6843
Semiflangia

151986843
71404407: RNCC: 3 | RNVC: 2
(241)AE19271404407: RNCC: 5 | RNVC: 2
71404407: RNCC: 5 | RNVC: 2

3 Nov 2004

5340-15-219-9514
Serratura A Bussola

152199514
51-8-40: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-151-1434
Assieme Staffa Di F

151511434
381-0352/01: RNCC: 3 | RNVC: 2

30 Mar 2000

5340-15-218-2529
Cerniera Quadra 50M

152182529
121-50MM: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-121-7285
Patend Label Plate

151217285
MBEU40885: RNCC: 3 | RNVC: 2

6 Feb 1996

5340-15-112-7516
Cover

151127516
90402615021: RNCC: 3 | RNVC: 2

7 Sep 1989

5340-15-166-4923
Serratura Elettrica

151664923
6023100: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-213-8534
Ruota X Cancello Go

152138534
ART360MM80: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-219-8723
Cavo A St Fermaglio

152198723
198-2458: RNCC: 5 | RNVC: 3

16 Nov 2005

5340-15-119-7849
Resilient Mount

151197849
73146385: RNCC: 3 | RNVC: 2

17 Nov 1994

5340-15-154-1761
Dschetto Brocciato

151541761
130325: RNCC: 3 | RNVC: 2

27 Mar 2001

5340-15-117-4114
Corrosion Preventive Anode

151174114
78900/03-60805: RNCC: 3 | RNVC: 2

26 Apr 1994

5340-15-166-5027
Cap

151665027
FG797040800: RNCC: 3 | RNVC: 2

1 Nov 2002

5340-15-113-2540
Complessivo Flangia

151132540
377A2048-407: RNCC: 3 | RNVC: 2

15 Apr 1991

5340-15-182-4363
Fascetta Stringit.

151824363
MM95/113: RNCC: 3 | RNVC: 2

19 Dec 2008

5340-15-122-3364
Elemento Di Giunzio

151223364
216A8005-001: RNCC: 3 | RNVC: 2

25 Jun 1996

5340-15-170-6665
Bracket

151706665
GA752: RNCC: 3 | RNVC: 2

5 May 2003

5340-15-158-5239
Control Rod

151585239
263A1878-415: RNCC: 3 | RNVC: 2

1 Mar 2004

5340-15-137-1199
Molla

151371199
151609: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-074-4021
Turnbuckle

150744021
1A52UNI2018A35-663ZN: RNCC: 2 | RNVC: 2

31 Dec 1975

5340-15-109-6270
Cuffia Protezione L

151096270
002959: RNCC: 3 | RNVC: 2

2 Dec 1989

5340-15-107-7421
Threaded End Tensioning Tie Rod

151077421
819-8: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-199-1601
Turnbuckle

151991601
99450202: RNCC: 3 | RNVC: 2
(241)AE19299450202: RNCC: 5 | RNVC: 2
99450202: RNCC: 5 | RNVC: 2

23 Jan 2005

5340-15-217-5059
Grata Per Finestra

152175059
MAGLIA4X4: RNCC: 3 | RNVC: 2

16 Nov 2005

5340-15-136-2584
Tappo Carica Olio

151362584
09002512: RNCC: 3 | RNVC: 2

9 Oct 1996

5340-15-120-8932
Fork

151208932
982150126: RNCC: 3 | RNVC: 2

4 Sep 1995

5340-15-187-2284
Assieme Portello Pe

151872284
A21952: RNCC: 3 | RNVC: 2
(241)A7904A21952: RNCC: 5 | RNVC: 2

26 Feb 2009

5340-15-138-4611
Fermaglio

151384611
5938083: RNCC: 3 | RNVC: 2

10 Oct 1996

5340-15-109-6802
Dust And Moisture Seal Protective Cap

151096802
71186: RNCC: 3 | RNVC: 2

1 Jan 1994

5340-15-121-9898
Double Angle Bracket

151219898
60177063: RNCC: 3 | RNVC: 2

4 Apr 1996

5340-15-105-2079
Rubber Bumper

151052079
42309535: RNCC: 3 | RNVC: 2

30 May 1989

5340-15-119-3173
Carter De Protectio

151193173
4618825: RNCC: 3 | RNVC: 2

28 Mar 1995

Load More Results